Manuale di Bosch Serie | 6 VarioPerfect
Manuale per Bosch Serie | 6 VarioPerfect in Inglese. Questo manuale PDF ha 40 pagine.
Table of contents
- Your new washing machine1
- Display rules1
- : Warning!1
- Caution!1
- Note/tip1
- 1. 2. 3. / a) b) c)1
- Contentsen Instruction Manual and Installation Instructions2
- 8 Intended use 42
- ( Safety instructions 52
- 7 Environmental protection 72
- 5 Positioning and connecting 82
- * Getting to know the appliance 162
- Z Laundry 192
- C Detergent 202
- 0 Programme default settings 212
- \ Additional programme settings 232
- 1 Operating the appliance 242
- H Sensors 293
- M Setting the signal 303
- 2 Cleaning and maintenance 303
- 3 Faults and what to do about them 333
- 4 After-sales service 383
- J Technical data 383
- r Aqua-Stop warranty 393
- 8 Intended use3
- Intended use3
- Children must not perform cleaning or maintenance work unsupervised.3
- ( Safety instructions4
- Safety instructions4
- Electrical safety4
- : Warning4
- Risk of death!4
- Risk of injury4
- : Warning4
- Risk of injury!4
- : Warning4
- Risk of scalding!4
- Safety for children4
- : Warning4
- Danger of death!4
- : Warning5
- Danger of death!5
- : Warning5
- Risk of suffocation!5
- : Warning5
- Risk of poisoning!5
- : Warning5
- Eye/skin irritation!5
- : Warning5
- Risk of injury!5
- 7 Environmental protection6
- Environmental protection6
- Packaging/used appliance6
- Tips on economical use6
- Overview of programmes6
- ~ Supplementary sheet for the operating and installation instructions.6
- The display provides information about the relative energy consumption in the selected program.6
- The more indicator lights light up, the higher the program's consumption.6
- This enables you to compare the consumption levels of the different programs when choosing your program settings and to decide on an energy- and water-saving program setting for the selected program.6
- Energy-saving mode is not activated if a programme is running.6
- 5 Positioning and connecting7
- Positioning and connecting7
- Included with the appliance7
- Note:7
- Safety instructions8
- : Warning8
- Risk of injury!8
- Caution!8
- Damage to the appliance8
- Caution!8
- Water damage8
- Notes8
- Installation surface8
- Note:8
- Installation on a base or a wooden joist floor8
- Caution!8
- Damage to the appliance8
- Note:8
- Installation on a platform with drawer8
- Installing the appliance in a kitchenette9
- : Warning9
- Risk of death!9
- Notes9
- Removing the transport locks9
- Caution!9
- Damage to the appliance9
- Note:9
- 1. Take the hoses out of the holders.9
- 2. Unscrew and remove all four transport brace screws.9
- Remove the sleeves. To do this, remove the mains cable from the holders.9
- 3. Fit the covers. Lock the covers firmly in place by applying pressure to the snap-in hooks.9
- Hose and cable lengths10
- Tip:10
- Water inlet10
- : Warning10
- Danger of death!10
- Notes10
- Connection11
- Note:11
- Water outlet11
- Caution!11
- Water damage11
- Note:11
- : Warning11
- Risk of scalding!11
- Caution!11
- Damage to the appliance/fabrics11
- Make sure that:12
- The connection point must be secured using a hose clamp with a diameter of 24-40 mm (available from specialist dealers).12
- Levelling12
- 1. Loosen the lock nuts using a wrench, by turning it in a clockwise direction.12
- 2. Check the alignment of the washing machine with a spirit level, and adjust it if necessary. Change the height by turning the appliance feet.12
- All four appliance feet must stand firmly on the ground.12
- 3. Tighten the lock nut against the housing.12
- In doing so, hold the foot tight and do not adjust its height.12
- The lock nuts on all four appliance feet must be screwed tightly against the housing.12
- Electrical connection12
- : Warning12
- Danger of death!12
- Notes13
- : Warning13
- Danger of death!13
- Notes13
- Before washing for the first time13
- Notes13
- 1. Check the machine.14
- 2. Remove the protective foil from the work top and the control panel.14
- 3. Connect the mains plug.14
- 4. Turn on the tap.14
- 5. Close the door (do not load any laundry).14
- 6. Depending on the model, select ¾ Drum Clean 90 °C or i Cottons 90 °C program.14
- 7. Open the detergent drawer.14
- 8. Pour approximately 1 litre of water into compartment II.14
- 9. Pour standard detergent into compartment II.14
- Note:14
- 10. Close the detergent drawer.14
- 11. Press the A button.14
- 12. When the program ends, switch off the appliance.14
- Transportation14
- Preparatory work:14
- 1. Turn off the water tap.14
- 2. Reduce the water pressure in the supply hose.14
- Maintenance – filter in the water supply ~ Page 3214
- 3. Disconnect the washing machine from the main plug.14
- 4. Drain the remaining detergent solution.14
- Maintenance – detergent solution pump blocked ~ Page 3114
- 5. Remove the hoses.14
- Installing the transport locks:14
- 1. Remove the covers and keep them in a safe place.14
- Use a screwdriver if necessary.14
- 2. Insert all four sleeves.14
- Clip the mains cable securely in the holders. Insert and tighten the screws.14
- Notes14
- * Getting to know the appliance15
- Getting to know the appliance15
- Washing machine15
- Control panel16
- Note:16
- Display panel16
- Button16
- Display indicator16
- Description16
- More information on the display panel17
- Display indicator17
- Description17
- Z Laundry18
- Laundry18
- Prepare the laundry18
- Caution!18
- Damage to the appliance/fabrics18
- Sorting laundry18
- Note:18
- Wash laundry with the same level of soiling together.18
- You can find examples of levels of soiling on ~ Page 2118
- The numbers in the symbols indicate the maximum washing temperature which may be used.18
- Starching18
- Note:18
- Dyeing/bleaching19
- Soaking19
- 1. Pour soaking agent/detergent into compartment II in accordance with the manufacturer's instructions.19
- 2. Select the desired programme.19
- 3. Press the A button to start the programme.19
- 4. After approx. ten minutes, press the A button to pause the programme.19
- 5. After the desired soaking time, press the A button again to continue or change the programme.19
- Notes19
- C Detergent19
- Detergent19
- Correct selection of detergent19
- Note:19
- Suitable for boil-washable white laundry made from linen or cotton19
- Programme: Cottons/19
- cold - max. 90 °C19
- Suitable for coloured laundry made from linen or cotton19
- Programme: Cottons/19
- cold - max. 60 °C19
- Suitable for coloured laundry made from easy-care fibres, synthetic fibres19
- Programme: Easy-Care/19
- cold - max. 60 °C19
- Suitable for delicate, fine fabrics, silk or viscose19
- Programme: Delicate/Silk/19
- cold - max. 40 °C19
- Suitable for wool19
- Programme: Wool/19
- cold - max. 40 °C19
- Saving energy and detergent20
- Saving20
- Soiling/note20
- Note:20
- 0 Programme default settings20
- Programme default settings20
- Temperature20
- Spin speed20
- Finished in-time21
- To do this:21
- 1. Select a program.21
- The program duration is displayed for the selected program, e.g. 2:30 (hours:minutes).21
- 2. Press the Finished in-time button repeatedly until the required number of hours is displayed.21
- 3. Press the A button.21
- The door will be locked.21
- The selected number of hours (e.g. 8 h) is shown in the display panel and counts down until the wash program starts. The duration of the program is then displayed.21
- During the timer count-down, you can change the preselected number of hours as follows:21
- 1. Press the A button.21
- 2. Use the Finished in-time button to change the number of hours.21
- 3. Press the A button.21
- During the timer count-down, you can add or remove laundry as required:21
- 1. Press the A button.21
- 2. Open the door and add or remove laundry.21
- 3. Close the door.21
- 4. Press the A button.21
- Note:21
- \ Additional programme settings22
- Additional programme settings22
- Speed Eco22
- Washing in a shorter time while achieving a washing result that is consistent with, but uses more energy than the selected program without the Speed setting.22
- Note:22
- Energy-optimised washing by reducing the temperature while achieving a washing result that is consistent with the selected program without the Eco setting.22
- Easy-Iron22
- Note:22
- Prewash22
- Note:22
- Water Plus22
- Rinse Plus22
- 1 Operating the appliance23
- Operating the appliance23
- Preparing the washing machine23
- Note:23
- 1. Connect the mains plug.23
- 2. Turn on the water tap.23
- 3. Open the door.23
- 4. Check that the drum is completely drained. Drain if necessary.23
- Select programme/switch on the appliance23
- Note:23
- Change the programme default settings23
- Select additional programme settings23
- Placing laundry into the drum24
- : Warning24
- Danger of death!24
- Notes24
- 1. Place presorted items of laundry unfolded in the washing drum.24
- 2. Make sure that no items of laundry are trapped between the washing machine door and the rubber seal, and close the door.24
- The A button indicator lamp flashes to indicate that the washing program can be started. It is possible to change the settings. ~ "Dyeing/bleaching" on page 20~ "Spin speed" on page 2124
- Measure and add detergent and care products24
- Caution!24
- Damage to the appliance24
- : Warning24
- Eye/skin irritation!24
- Note:24
- 1. Pull out the detergent drawer as far as possible.25
- 2. Add detergent and/or care products.25
- 3. Close the detergent drawer.25
- Position the measuring aid for measuring the correct amount of liquid detergent:25
- 1. Pull out the detergent drawer. Press down the insert and fully remove the drawer.25
- 2. Slide the measuring aid forwards, fold it down and click it into place.25
- 3. Reinsert the drawer.25
- Note:25
- Starting the programme25
- Note:25
- Note:25
- Childlock26
- Note:26
- Note:26
- Adding/removing laundry26
- Notes26
- Changing the programme26
- 1. Press the A button.26
- 2. Select another program.26
- 3. Press the A button.The new program starts from the beginning.26
- Cancel the programme26
- For programs at high temperature:26
- 1. Press the A button.26
- 2. To cool down laundry: Select ' Rinse.26
- 3. Press the A button.26
- For programs at low temperature:26
- 1. Press the A button.26
- 2. Select 0 Spin/Drain [//0 Spin/ Empty [.26
- 3. Press the A button.26
- Programme end during rinse hold27
- Programme end27
- Removing laundry/switching off the appliance27
- 1. Open the door and remove the laundry.27
- 2. Turn the program selector to off position. The appliance is switched off.27
- 3. Turn off the tap.27
- Note:27
- Notes27
- H Sensors28
- Sensors28
- Automatic load sensing28
- Unbalanced load detection system28
- Note:28
- VoltCheck28
- Note:28
- M Setting the signal29
- Setting the signal29
- Activating the setting mode29
- 1. Select the i Cottons program at position 1. The washing machine is switched on.29
- 2. Press the A button and, at the same time, turn the program selector clockwise to position 2. Release the button.29
- 2 Cleaning and maintenance29
- Cleaning and maintenance29
- : Warning29
- Danger of death!29
- : Warning29
- Risk of poisoning!29
- Caution!29
- Damage to the appliance29
- Machine housing/control panel29
- Drum29
- Descaling30
- Detergent drawer and housing30
- If the washing machine contains detergent or fabric softener residues:30
- 1. Pull out the detergent drawer. Press down the insert and fully remove the drawer.30
- 2. To remove the insert: Push the insert upwards from below with your finger.30
- 3. Clean the detergent dispenser tray and insert with water and a brush, and dry it. Clean the inside of the housing as well.30
- 4. Fit the insert and lock it in place (push the cylinder onto the guide pin).30
- 5. Push in the detergent drawer.30
- Note:30
- Detergent solution pump blocked30
- : Warning30
- Risk of scalding!30
- After the water has cooled down:30
- 1. Turn off the water tap so that no more water can flow in and has to be drained via the drain pump.30
- 2. Switch off the appliance.30
- 3. Disconnect the mains plug.30
- 4. Open and remove the service flap.30
- 5. Take the drain hose out of the retainer.30
- Remove the sealing cap, allow the water to flow out into a suitable container.30
- Replace the sealing cap and place the drainage hose in the retainer.30
- 6. Carefully unscrew the pump cover, residual water may leak out.30
- Clean the interior, pump cover thread and pump housing. The impeller in the detergent solution pump must be able to rotate.30
- Refit the pump cover and screw it on tightly. The handle must be in a vertical position.30
- 7. Place the service flap back on, lock it into place, and close it.31
- Note:31
- The drain hose at the siphon is blocked31
- 1. Switch off the appliance.31
- 2. Disconnect the mains plug.31
- 3. Loosen the hose clamp. Carefully remove the drain hose; residual water may leak out.31
- 4. Clean the drain hose and siphon connecting piece.31
- 5. Reattach the drain hose and secure the connection using the hose clamp.31
- Filter in the water supply is blocked31
- First, reduce the water pressure in the supply hose:31
- 1. Turn off the tap.31
- 2. Select any program (except 0 Spin/ Drain [//0 Spin/Empty [).31
- 3. Press the A button. Allow the program to run for approximately 40 seconds.31
- 4. Turn the program selector to off position.31
- 5. Pull out the mains plug.31
- 6. Clean the filter on the tap:31
- Disconnect the hose from the tap.31
- Clean the filter with a small brush.31
- 7. For standard and Aqua-Secure models, clean the filter on the rear of the appliance:31
- Remove the hose from the rear of the appliance.31
- Use pliers to remove the filter and then clean it.31
- 8. Insert the filter, connect the hose and check for leaks.31
- 3 Faults and what to do about them32
- Faults and what to do about them32
- Emergency release32
- Note:32
- : Warning32
- Risk of scalding!32
- : Warning32
- Risk of injury!32
- Caution!32
- Water damage32
- If the laundry has to be removed, the washing machine door can be opened as follows:32
- 1. Switch off the appliance.32
- 2. Disconnect the mains plug.32
- 3. Drain the water. ~ Page 3132
- 4. Pull the emergency release downwards with a tool and release.32
- The washing machine door can now be opened.32
- Information on the display panel33
- Display33
- Cause/Remedy33
- Note:33
- Note:33
- Faults and what to do about them34
- Faults34
- Cause/Remedy34
- Note:34
- Note:34
- Note:35
- 4 After-sales service37
- After-sales service37
- You can find this information:37
- J Technical data37
- Technical data37
- r Aqua-Stop warranty38
- Aqua-Stop warranty38
- In addition to warranty claims against the vendor based on the purchase agreement and to our appliance warranty, we will provide compensation under the following conditions:38
- 1. If water damage is caused due to a fault in our Aqua-Stop system, we will compensate domestic customers for the damage caused.38
- 2. The liability guarantee is valid for the service life of the appliance.38
- 3. It is a prerequisite of all warranty claims that the appliance with Aqua- Stop must have been installed and connected correctly in accordance with our instructions; this also includes a correctly fitted Aqua-Stop extension (genuine accessories).38
- Our warranty does not cover defective feed lines or fittings leading to the Aqua-Stop connection at the tap.38
- 4. Appliances with Aqua-Stop do not need to be supervised during operation, nor secured afterwards by turning off the tap.38
- The tap only needs to be turned off if you are away from home for a long period, e.g. for several weeks' holiday.38
Visualizza di seguito un manuale del Bosch Serie | 6 VarioPerfect. Tutti i manuali su ManualsCat.com possono essere visualizzati gratuitamente. Tramite il pulsante "Seleziona una lingua", puoi scegliere la lingua in cui desideri visualizzare il manuale.
- Marca:
- Bosch
- Prodotto:
- Lavatrice
- Modello/nome:
- Serie | 6 VarioPerfect
- Tipo di file:
- Lingue disponibili:
- Inglese
Domande e risposte
Erede acqua da sotto
Durante il lavaggio il display segnala E:29 , allora ho pulitro il filtro in corrispondenza del rubinetto dell’acqua ma non mi è sembrato sporco. Dice il manuale che nei modelli standard e aqua-secure il filtro è sul retro ma io non so quale sia il modello che ho. Come faccio a capirlo? In attesa di vostra gentile risposta vi ringrazio
Hai una domanda sul Bosch Serie | 6 VarioPerfect ma non riesci a trovare una risposta nel manuale dell'utente? Probabilmente gli utenti di ManualsCat.com potranno aiutarti a rispondere alla tua domanda. Completando il seguente modulo, la tua domanda apparirà sotto al manuale del Bosch Serie | 6 VarioPerfect. Assicurati di descrivere il problema riscontrato con il Bosch Serie | 6 VarioPerfect nel modo più preciso possibile. Quanto più è precisa la tua domanda, maggiori sono le possibilità di ricevere rapidamente una risposta da parte di un altro utente. Riceverai automaticamente una e-mail per informarti che qualcuno ha risposto alla tua domanda.
Chiedi informazioni sul Bosch Serie | 6 VarioPerfect