Zanussi ZKG2145 manual

View a manual of the Zanussi ZKG2145 below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Zanussi
  • Product: Washing Machine
  • Model/name: ZKG2145
  • Filetype: PDF
  • Available languages: English, Dutch

Table of Contents

Page: 0
User
manual
Washer-
dryer
ZKG 2125
132969940.qxd 02/10/2007 16.07 Pagina 1
Page: 1
2
Content
Safety information - - - - - - - - - - - - - - - - - - -3
Description of the appliance - - - - - - - - - - - -5
Detergent dispenser drawer - - - - - - - - - - - -5
Control panel and functions - - - - - - - - - -6-8
Programme table - - - - - - - - - - - - - - - - -9-10
Programme information - - - - - - - - - - - - - -11
Washing and drying hints - - - - - - - - - - - - -11
Before the first use - - - - - - - - - - - - - - - - -15
Operating Sequence - - - - - - - - - - - - - - - -15
Washing - - - - - - - - - - - - - - - - - - - - - - - - -15
Drying - - - - - - - - - - - - - - - - - - - - - - - - - -19
Drying programmes - - - - - - - - - - - - - - - - -20
Care and cleaning - - - - - - - - - - - - - - - - - -21
Something not working - - - - - - - - - - - - - - 24
Technical data- - - - - - - - - - - - - - - - - - - - - 28
Consumption values - - - - - - - - - - - - - - - - 29
Installation instruction - - - - - - - - - - - - - - - 30
Environmental concerns - - - - - - - - - - - - - 33
Guarantee - - - - - - - - - - - - - - - - - - - - - 34-35
Thank you for selecting our appliance
We wish you lots of enjoyment with your new appliance and we hope that you will consider our
brand again when purchasing household appliances.
Please read this user manual carefully and keep it throughout the product life cycle as a reference
document. The user manual should be passed on to any future owner of the appliance.
The following symbols are used in this manual:
Important information concerning your personal safety and information on how to avoid
damaging the appliance.
General information and tips
Environmental information
132969940.qxd 02/10/2007 16.07 Pagina 2
Page: 2
3
Safety information
In the interest of your safety and to ensure
the correct use, before installing and first
using the appliance, read this user manual
carefully, including its hints and warnings.
To avoid unnecessary mistakes and
accidents, it is important to ensure that all
people using the appliance are thoroughly
familiar with its operation and safety
features. Save these instructions and make
sure that they remain with the appliance if it
is moved or sold, so that everyone using it
through its life will be properly informed on
appliance use and safety.
General safety
● It is dangerous to alter the specifications or
attempt to modify this product in any way.
● During high temperature washing and drying
programmes the door glass may get hot. Do
not touch it!
● Make sure that small pets do not climb into
the drum. To avoid this, please check into
the drum before using.
● Any objects such as coins, safety pins, nails,
screws, stones or any other hard, sharp
material can cause extensive damage and
must not be placed into the machine.
● Only use the advised quantities of fabric
softener and detergent. Damage to the fabric
can ensue if you over-fill. Refer to the
manufacturer’s recommendations of
quantities.
● Wash small items such as socks, laces,
washable belts etc in a washing bag or
pillow case as it is possible for such items to
slip down between the tub and the inner
drum.
● Do not use your washer-dryer to wash
articles with whalebones, material without
hems or torn material.
● Always unplug the appliance and turn off the
water supply after use, clean and
maintenance.
● Under no circumstances should you attempt
to repair the machine yourself. Repairs
carried out by inexperienced persons may
cause injury or serious malfunctioning.
Contact your local Service Centre. Always
insist on genuine spare parts.
Installation
● This appliance is heavy. Care should be
taken when moving it.
● When unpacking the appliance, check that it
is not damaged. If in doubt, do not use it and
contact the Service Centre.
● All packing and transit bolts must be
removed before use. Serious damage can
occur to the product and to property if this is
not adhered to. See relevant section in the
user manual.
● After having installed the appliance, check
that it is not standing on the inlet and drain
hose and the worktop is not pressing the
electrical supply cable.
● If the machine is situated on a carpeted floor,
please adjust the feet in order to allow air to
circulate freely.
● Always be sure, that there is no water
leakage from hoses and their connections
after the installation.
● If the appliance is installed in a location
subject to frost, please read the «dangers of
freezing» chapter.
● Any plumbing work required to install this
appliance should be carried out by a
qualified plumber or competent person.
● Any electrical work required to install this
appliance should be carried out by a
qualified electrician or competent person.
132969940.qxd 02/10/2007 16.07 Pagina 3
Page: 3
4
Use
● This appliance is designed for domestic use.
It must not be used for purposes other than
those for which it was designed.
● Only wash and dry fabrics which are
designed to be machine washed and dried.
Follow the instructions on each garment
label.
● Do not overload the appliance. See the
relevant section in the user manual.
● Before washing, ensure that all pockets are
empty and buttons and zips are fastened.
Avoid washing frayed or torn articles and
treat stains such as paint, ink, rust, and
grass before washing. Underwired bras must
NOT be machine washed.
● Garments which have been in contact with
volatile petroleum products should not be
machine washed. If volatile cleaning fluids
are used, care should be taken to ensure
that the fluid is removed from the garment
before placing in the machine.
● As some duvets and eiderdowns should be
washed/dried in large commercial machines
because of their bulk, please check with the
manufacturer of the item before washing in a
domestic machine.
● The users should always check that they
have not left their gas lighters (disposable or
otherwise) in their clothing.
● Never dry items that have had contact with
chemicals such as dry cleaning fluid.These
are of a volatile nature and could cause an
explosion.
● Only tumble dry items which have been
washed in water or require airing.
● Plastic detergent dispensers should not
remain in the drum during the drying cycle,
as the plastic used is not designed to
withstand the heat. If you wish to wash-
through-to-dry you should use the
conventional detergent dispenser drawer.
● Never pull the power supply cable to remove
the plug from the socket; always take hold of
the plug itself.
● Never use the washer-dryer if the power
supply cable, the control panel, the working
surface or the base are damaged so that the
inside of the washer-dryer is accessible.
Child safety
● This appliance is not intended for use by
person (including children) with reduced
physical sensory or mental capabilities or
lack of experience and knowledge unless
they have been given supervision or
instruction concerning use of the appliance
by a person responsible for their safety.
● Young children should be supervised to
ensure that they do not play with the
appliance.
● The packaging components (e.g. plastic film,
polystyrene) can be dangerous to children -
danger of suffocation! Keep them out of
children’s reach
● Keep all detergents in a safe place out of
children’s reach.
● Make sure that children or pets do not climb
into the drum. To avoid this the machine
incorporates special feature.
To disable this device
and restore the
possibility of closing the
door, rotate the button
anti-clockwise until the
groove is vertical.
To activate this device,
rotate the button
(without pressing it)
inside the door
clockwise until the
groove is horizontal. If
necessary use a coin.
132969940.qxd 02/10/2007 16.07 Pagina 4
Page: 4
5
Description of the appliance
Detergent dispenser drawer
Control panel
Door opening handle
Drain pump
Adjustable feet
5
4
3
2
1 1 2
3
4
5
Detergent dispenser drawer
Prewash
Wash
Fabric Softener
132969940.qxd 02/10/2007 16.07 Pagina 5
Page: 5
Control panel and functions
6
2 4 5 6 7
3
1 8 10
9
90°
60°
30°
40°
60°
30°
40°
40°
30° 40°
40°
1200
900
700
ZKG 2125
500
40°
60°
60°
40°
90°
30°
40°
Programme selector dial and
On/Off switch
● The programme selector dial allows to select a
programme and/or to switch the machine on/off. It can
be turned either clockwise or anticlockwise. The light
Start/Pause starts to flash.
1
Programme selector dial symbols:
= White/Coloured cottons, = Synthetics, = Delicates, = Séchage
= Economy, = Prewash, = «Easy Iron», = Handwash, = Cold Wash, =
Jeans, = Sport, = Rinsing, = Draining , = Spinning
Key symbols Control Panel:
= «Rinse Hold» option, = «Spin reduction» button, = «Electronic drying» button,
= Iron dry option and = Store dry option = «Timed drying» button, , = «Super
Quick» option, = «Extra Rinse» button, = «Start Pause» button, = «Door locked»
light and = «Delay start» option.
Infos
Henceforth, the programme selector dial, the different buttons and the programme progress
display will be indicated in all the book with the relevant numbers given in the table below.
132969940.qxd 02/10/2007 16.07 Pagina 6
Page: 6
7
Automatic Drying button
● By means of this button you can choose the required
degree of drying for cottons and synthetics between:
Cupboard dry (cottons and synthetics) and Iron dry
(cottons).The corresponding pilot light illuminates.
Extra Rinse button
● By means of this button, the machine performs some
additional rinses.
3
6
Start/Pause button
● The Start/Pause button allows to start the selected
programme; the corresponding green pilot light stops
flashing.
● This button interrupts also a programme which is running,
the corresponding green pilot light starts to flash.
Drying Time button
● By depressing this button you can select a timed
programme for cotton or synthetics, the relevant phase
light illuminates.
Door locked light
● The Door locked light indicates when it is possible to
open the door.
Display
● The display shows the following information: duration of
the selected programme, selected drying time, incorrect
option selection, alarm codes, child safety lock and
end of programme.
7
8
4
9
Spin reduction button
● Press the Spin button repeatedly to change the spin
speed, if you want your laundry to be spun at a speed
different from the one proposed by the washer-dryer or to
select the «Rinse Hold» option. The relevant light will light
up.
2
Super Quick button
● With this option it is possible to reduce the washing time
for lightly soiled laundry.
5
Delay Start button
● With this function,the wash programme can be delayed
up to 20 hours to a more convenient for you time.
10
132969940.qxd 02/10/2007 16.07 Pagina 7
Page: 7
8
Rinse hold (Button 2)
By selecting this option, the machine will not
drain the water of the last rinse to prevent the
fabrics from creasing.
When the programme has finished, the light of
the button 8 goes off and the light 9
illuminates. The door is locked to indicate that
the water must be emptied out.
To empty out the water see chapter «At the
end of the programme».
«Automatic drying» (Button 3)
By means of this button you can choose the
required degree of drying for cottons and
synthetics between: Cupboard dry (cottons and
synthetics) and Iron dry (cottons). The
corresponding pilot light illuminates.
The drying time is automatically adjusted by the
machine: the laundry will be dried to the selec-
ted degree of dryness.
Drying Time button (Button 4)
By depressing this button you can select a
timed programme for cotton or synthetics. The
relevant light illuminates.
For Cottons and Synthetics you can select a
drying time from 10 minutes to 130 minutes
(2.10). Every time you press the button the
time increases by 5 mins.
Note!
The programme time will automatically increase
by up to 2 minutes. this is quite normal.
«Super Quick» (Button 5)
Short cycle for lightly soiled items or for laundry
that have been used or worn for a short time
and needs only freshening up.
We recommend you to reduce the fabrics
loading.
The washing time will be reduced according to
the type of fabric and the selected temperature
«Extra rinse» (Button 6)
The machine performs some additional rinses
during the washing cycle. This option is
recommended for people who are allergic to
detergents, and in areas where the water is
very soft.
«Door locked» light (9)
This light illuminates after pressing button 8.
The light 9 indicates when the door can be
opened:
● light on: the door is locked and cannot be
opened. The washing or the drying cycle
starts working and the door is locked.
● light off: the door can be opened. The
washing programme has finished.
If there is water left in the tub, the light 9
remains lit. The door will be still locked and it
will be necessary to empty out before
opening the door.
To empty out the water see chapter «At the
end of the programme».
«Delay start» (Button 10)
The wash programme can be delayed from 30
min - 60 min - 90 min, 2 hours and then by 1
hour up to a maximum of 20 hours.
The Delay start cannot be selected with
«Drain» programme.
Functions
132969940.qxd 02/10/2007 16.07 Pagina 8
Page: 8
9
Programme table
Cottons
90° - 60°
White cotton (heavy
soiled cotton items)
Spin red./
Super Quick, Extra rinse
Main wash
Rinses
Long spin at the
maximum speed
Cottons
60° - 40°- 30°
White and colour
cotton (heavy soiled
cotton items)
Spin red./
Super Quick, Extra rinse
Main wash
Rinses
Long spin at the
maximum speed
Cottons
60° Eco
White and fast colour
cotton (normally soiled
cotton items)
Spin red./
Extra rinse
Main wash
Rinses
Long spin at the
maximum speed
Synthetics
60° - 40° - 30°
Synthetic or mixed
fabrics,
Spin red./
Super Quick, Extra rinse
Main wash
Rinses
Short spin at 900 rpm
Synthetics
Easy iron 40°
Synthetic or mixed
fabrics to be gentle
washed and spun.
Spin red./
Extra rinse
Main wash
Rinses
Short spin at 900 rpm
Programme/
Temperature
Type of laundry Options
Description of
programme
Cotton
90° + Prewash
White cotton
(white cotton items
heavily soiled )
Spin red./
Super Quick, Extra rinse
Prewash, Main wash
Rinses
Long spin at the
maximum speed
Cotton
60° + Prewash
White cotton and fast
colour cotton
(cotton items normally
soiled )
Spin red./
Super Quick, Extra rinse
Prewash, Main wash
Rinses,
Long spin at the
maximum speed
Cotton
40° + Prewash
Cotton colour
(cotton colour items
normally soiled )
Spin red./
Super Quick, Extra rinse
Prewash, Main wash
Rinses
Long spin at the
maximum speed
132969940.qxd 02/10/2007 16.07 Pagina 9
Page: 9
10
Delicates
40° - 30°
Delicate fabrics, for
example curtains.
Spin red./
Super Quick, Extra rinse
Main wash
Rinses
Short spin at 700 rpm
Programme table
Rinses
Separate rinse cycle for
hand washed cotton
items.
Spin red./
Extra rinse
3 rinses
Long spin at the
maximum speed
Jeans
40°
Special programme for
jeans or dark colours
cotton items
Spin red./
Main Wash
Rinses
Long spin at 1000 rpm
Drain
For emptying out the last
rinse water in
programmes with the
Rinse Hold option.
Draining of water
Spin
Separate spin for
cottons.
Spin red.
Drain and long spin at
the maximum speed
Handwash
40° - 30° - Cold
Special programme for
hand washing fabrics Spin red./
Main wash
Rinses
Short spin at 1000 rpm
Sport Intensive
40°
Special programme for
sport items heavily soiled
Spin red./
Prewash, Main wash
Rinses
Short spin at 900 rpm
Max load for:
Cottons ......................................................6 kg
Synthetics ..................................................3 kg
Delicates ....................................................3 kg
Synthetics Easy Iron ..................................1 kg
Handwash ..................................................2 kg
Jeans..........................................................3 kg
Sport Intensive ......................................2.5 kg
Max load with «Super Quick» option :
Cotton + Super Quick ................................3 kg
Synthetics + Super Quick ........................ 2 kg
Delicates + Super Quick ............................2 kg
Programme/
Temperature
Type of laundry Options
Description of
programme
O
To interrupt a running programme, to cancel an incorrect option selection or
to switch the machine off,
132969940.qxd 02/10/2007 16.07 Pagina 10
Page: 10
11
Programme information
Rinses
With this programme it is possible to rinse and spin cotton garments
which have been washed by hand.
The machine performs 3 rinses, followed by a final spin at maximum
speed.
The spin speed can be reduced by depressing Spin button.
Drain
For emptying out the water of the last rinse in programmes with the
Rinse Hold option.
Turn first the programme selector dial to «O», then select programme
Drain and depress the Start/Pause button.
Easy Iron
Selecting this programme, the laundry is gently washed and spun to
avoid any creasing. In this way ironing is easier. Furthermore the
machine will perform additional rinses.
Spin
Separate spin for hand washed garments and after programmes
with Rinse Hold option. Before selecting this programme the
selector dial must be turned to «O». You can choose the speed by
means of the relevant button to adapt it to the fabrics to be spun.
O = Cancelling/Off
To reset a programme and to switch off the machine turn the
selector dial to «O». Now can a new programme be selected.
(Wool)
Handwash
Washing programme for machine washable wool as well as for hand
washable woollens and delicate fabrics with the «hand washing»
care symbol .
Eco programme
This programme can be selected for slightly or normally soiled
cotton items. The temperature will decrease and the washing time
will be extended. This allows to obtain a good washing efficiency by
saving energy.
Jeans
With this programme it is possible to wash free time items as pants,
shirts or jackets in Jeans and also jersey made of hi-tech materials.
Some extra rinses will be carried out by the machine.
Sport intensive
This programme is suitable for washing heavily soiled sport items.
The machine will add automatically a prewash phase before the
main wash to eliminate mud stains. The washing temperature is
40°C. The maximum spin speed is 900 rpm.
We recommend you NOT to put detergent in the compartment
marked by the symbol
132969940.qxd 02/10/2007 16.07 Pagina 11
Page: 11
12
Washing and drying hints
Sorting the laundry
Follow the wash code symbols on each
garment label and the manufacturer’s washing
instructions. Sort the laundry as follows: whites,
coloureds, synthetics, delicates, woollens.
Temperatures
Before loading the laundry
Never wash whites and coloureds together.
Whites may lose their «whiteness» in the
wash.
New coloured items may run in the first wash;
they should therefore be washed separately
the first time.
Make sure that no metal objects are left in
the laundry (e.g. hair clips, safety pins,
pins). Button up pillowcases, close zip
fasteners, hooks and poppers. Tie any belts
or long tapes.
Remove persistent stains before washing.
Rub particularly soiled areas with a special
detergent or detergent paste.
Treat curtains with special care. Remove hooks
or tie them up in a bag or net.
Avoid drying dark clothes with light coloured
fluffy items such as towels as these can attract
the fluff.
Remove the laundry when the appliance has
finished drying.
To avoid a static charge when drying is com-
pleted, use either a fabric softener when you
are washing the laundry or a fabric conditioner
specifically for tumble dryers.
Particularly delicate items such as synthetic
curtains, woollen and silk, garments with metal
inserts, nylon stockings, bulky garments such
as anoraks, bedcovers, quilts, sleeping bags
and duvets must not be machine dried.
Garments padded with foam-rubber or materi-
als similar to foam-rubber must not be machine
dried; they represent a fire hazard.
Also, fabrics containing residues of setting
lotions or hair sprays, nail solvents or similar
solutions must not be machine dried in order to
avoid the formation of harmful vapours.
For drying, follow the indications given on the
manufacturer’s labels.
For drying, follow the indications given on the
manufacturer’s labels.
May be tumble dried
Drying at high temperature
Drying at reduced temperature
Do not tumble dry
IMPORTANT!
As a dryer, the machine works on the
condensation principle.
Therefore, the water tap must be open and
the drain hose must drain water into a sink
or into the drain pipe, even during the dry-
ing cycle.
90° or 95°
for normally soiled white cottons
and linen (e.g. tea cloths, towels,
tablecloths, sheets...)
50°/60°
for normally soiled, colour fast
garments (e.g. shirts, night
dresses, pyjamas....) in linen,
cotton or synthetic fibres and for
lightly soiled white cotton (e.g.
underwear).
30°-40°-Cold
for delicate items (e.g. net
curtains), mixed laundry including
synthetic fibres and woollens
bearing the label «pure new wool,
machine washable, non-shrink».
132969940.qxd 02/10/2007 16.07 Pagina 12
Page: 12
13
Maximum loads
Recommended loads are indicated in the
programme charts.
General rules:
Cotton, linen: drum full but not too tightly
packed;
Synthetics: drum no more than half full;
Delicate fabrics and woollens: drum no more
than one third full.
Washing a maximum load makes the most
efficient use of water and energy.
For heavily soiled laundry, reduce the load
size.
Laundry weights
The following weights are indicative:
Removing stains
Stubborn stains may not be removed by just
water and detergent. It is therefore advisable to
treat them prior to washing.
Blood: treat fresh stains with cold water. For
dried stains, soak overnight in water with a
1200 g
bathrobe
100 g
napkin
700 g
quilt cover
500 g
sheet
200 g
pillow case
250 g
tablecloth
200 g
towelling towel
100 g
tea cloth
200 g
night dress
100 g
ladies’ briefs
600 g
man’s work shirt
200 g
man’s shirt
500 g
man’s pyjamas
100 g
blouse
100 g
men’s underpants
special detergent then rub in the soap and
water.
Oil based paint: moisten with benzine stain
remover, lay the garment on a soft cloth and
dab the stain; treat several times.
Dried grease stains: moisten with turpentine,
lay the garment on a soft surface and dab the
stain with the fingertips and a cotton cloth.
Rust: oxalic acid dissolved in hot water or a
rust removing product used cold. Be careful
with rust stains which are not recent since the
cellulose structure will already have been
damaged and the fabric tends to hole.
Mould stains: treat with bleach, rinse well
(whites and fast coloureds only).
Grass: soap lightly and treat with bleach
(whites and fast coloureds only).
Ball point pen and glue: moisten with
acetone (*), lay the garment on a soft cloth and
dab the stain.
Lipstick: moisten with acetone as above, then
treat stains with methylated spirits. Remove
any residual marks from white fabrics with
bleach.
Red wine: soak in water and detergent, rinse
and treat with acetic or citric acid, then rinse.
Treat any residual marks with bleach.
Ink: depending on the type of ink, moisten the
fabric first with acetone (*), then with acetic
acid; treat any residual marks on white fabrics
with bleach and then rinse thoroughly.
Tar stains: first treat with stain remover,
methylated spirits or benzine, then rub with
detergent paste.
(*) do not use acetone on artificial silk.
Detergents and additives
Good washing results also depend on the
choice of detergent and use of the correct
quantities to avoid waste and protect the
environment. Although biodegradable,
detergents contain substances which, in large
quantities, can upset the delicate balance of
nature.
132969940.qxd 02/10/2007 16.07 Pagina 13
Page: 13
14
The choice of detergent will depend on the
type of fabric (delicates, woollens, cottons,
etc.), the colour, washing temperature and
degree of soiling.
All commonly available washer-dryer
detergents may be used in this appliance:
● powder detergents for all types of fabric,
● powder detergents for delicate fabrics (60°C
max) and woollens,
● liquid detergents, preferably for low
temperature wash programmes (60°C max)
for all types of fabric, or special for woollens
only.
The detergent and any additives must be
placed in the appropriate compartments of the
dispenser drawer before starting the wash
programme.
If using concentrated powder or liquid
detergents, a programme without prewash
must be selected.
The washer-dryer incorporates a recirculation
system which allows an optimal use of the
concentrated detergent.
Pour liquid detergent into the dispenser drawer
compartment marked just before starting
the programme.
Any fabric softener or starching additives must
be poured into the compartment marked
before starting the wash programme.
Follow the product manufacturer’s
recommendations on quantities to use and do
not exceed the «MAX» mark in the
detergent dispenser drawer.
Quantity of detergent to be used
The type and quantity of detergent will depend
on the type of fabric, load size, degree of
soiling and hardness of the water used.
Water hardness is classified in so-called
«degrees» of hardness. Information on
hardness of the water in your area can be
obtained from the relevant water supply
company, or from your local authority.
Follow the product manufacturers’ instructions
on quantities to use.
Degrees of water hardness
Follow the product manufacturers’ instructions
on quantities to use.
Use less detergent if:
● you are washing a small load,
● the laundry is lightly soiled,
● large amounts of foam form during washing.
Level
Degrees
German
°dH
French
°T.H.
Characteristic
1 0-7 0-15
soft
2 8-14 16-25
medium
3 15-21 26-37
hard
4 > 21 > 37
very hard
132969940.qxd 02/10/2007 16.07 Pagina 14
Page: 14
15
Before the first use
WARNING!
Ensure that the electrical and water
connections comply with the installation
instructions.
IMPORTANT!
Remove the polystyrene block and any
material from the drum.
IMPORTANT!
Pour 2 litres of water into the main wash
compartment of the detergent drawer in
order to activate the ECO valve. Then run a
cotton cycle at 90°C, without any laundry in the
machine, to remove any manufacturing residue
from the drum and tub. Pour 1/2 a measure of
detergent into the dispenser drawer and start
the machine.
Child safety lock
This device permits you to leave the appliance
unsupervised without having the worry that
children might be injured by or cause damage
to the appliance.
This function remains able also when the
washer-dryer is not working.
There are two different ways to set this option:
● before pressing the button 8: it will be
impossible to start the machine.
● after pressing the button 8 it will be
impossible to change any other programme
or option.
To enable (disable) this option press
simoultaneously for about 6 seconds 2 and 3
buttons until the icon appears (disappears)
on (from) the display.
Acoustic signals
The machine is provided of an acoustic device,
which sounds in the following cases:
● at the end of the cycle
● in the event of operating problems
By pressing the 4 and 5 buttons
simultaneously for about 6 seconds, the
acoustic signal is deactivated (except for the
events of operating problems).
By pressing these 2 buttons again, the the
acoustic signal is reactivated.
Operating sequence
Washing
1. Load the laundry
Open the door by
carefully pulling the
door handle outwards.
Place the laundry in
the drum, one item at
a time, shaking them
out as much as
possible. Close the door.
2. Measure out the detergent and the fabric
softener
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent required,
132969940.qxd 02/10/2007 16.07 Pagina 15
Page: 15
16
pour it into the main wash compartment
and, if you wish to carry out a programme with
the prewash phase, pour it into the
compartment marked .
If required, pour fabric softener into the
compartment marked (the amount used
must not exceed the «MAX» mark in the
drawer). Close the drawer gently.
Select the required programme by means
ofthe programme selector dial (1)
Turn the programme selector dial to the
required programme. The green light of button
8 starts to flash.
It can be turned either clockwise or
anticlockwise. On position «O» the programme
is reset and the machine is switched OFF.
At the end of the programme the selector
dial must be turned to position «O», to
switch the machine off.
IMPORTANT!
If you turn the programme selector dial to
another programme when the machine is
working, the red light will of the button 8
flashes 3 times and the message Err is
displayed on the display to indicate a wrong
selection. The machine will not perform the
new selected programme.
Select the spin speed or the Rinse Hold
option by pressing button 2
The relevant light will light up.
When selecting a programme, the light
corresponding to the maximum speed allowed
for that programme will illuminate (refer to the
section «Programme table» for the maximum
allowed spin speed).
Select the degree of dryness or the duration
of the drying cycle by means of buttons 3
and 4
The relevant light illuminates.
By depressing the button 3 it is possible to
select the degrees of dryness for cotton or
synthetics items. The washer dryer will
automatically adjust the duration of the drying
cycle to the selected degree.
Also the button 4 allows you to select a drying
time for Cottons and Synthetics from 10
minutes to 130 minutes (2.10). Every time you
press this button the time increases by 5 mins.
Note!
The programme time will automatically increase
by up to 2 minutes. This is quite normal.
Select the desired option by means of
buttons 5 and 6
Depending on the programme, different
functions can be combined. These must be
selected after choosing the desired programme
and before depressing the button 8. The
corrisponding light illuminates.
For more information about the compatibility of
the options with the washing programmes,
refer to the section «Programmes table».
Select the delayed start by pressing the
button 10
Depress button this button to select the
required delay.
The selected delay time value will appear on
the display for few seconds, then the duration
of the programme will appear again.
You must select this option after you have set
the programme and before you press the
button 8.
You can cancel the delay time at any moment,
before you press button 8.
If you have already pressed it, and you wish
to cancel the delay time, proceed as follows:
• set the washing machine to PAUSE by
pressing button 8;
• press the button 10 once. On the display will
appear the symbol «0’».
• press button 8 again to start the programme.
132969940.qxd 02/10/2007 16.07 Pagina 16
Page: 16
17
IMPORTANT!
• If the programme has already started, the
selected delay can be modified only after you
have turned the programme selector dial to
the «O» position and after you have selected
the programme again.
• The door will be locked throughout the delay
time. If you need to open the door, you must
first set the washer dryer to PAUSE by
pressing button 8. After you have closed the
door, press the same button again.
Note!
The Delay Start cannot be selected with
«Drain» programme.
Display
The display shows the following information:
After selecting a programme the duration of
the selected programme appears in minutes
or hours and minutes on the display .(e.g.
2.05)
During the program-
me, the time remai-
ning is updated every
minute.
Selected drying time
After selecting a drying programme programme
the drying time is shown in minutes or hours
and minutes.
After the programme
has started, the time
remaining is updated
every minute.
The Delayed start appears on the display for
about 3 seconds, then the duration of the
previously selected programme is displayed.
1.00
2.00
The delay time value
decreases by one
unit every hour, 90
minutes and then,
when 1 hour remain,
every minute.
The incorrect option selection is indicated
by the message Err displayed for few
seconds and by flashing of the red light button
8.
In the event of operating problems, some
alarm codes can be displayed, (see para-
graph “Something not working”).
The End of programme or the stop wit
water left in the tub is indicated by a flashing
zero «0».
Start the programme by pressing button 8
To start the selected programme, press this
button; the corresponding green pilot light
stops flashing.
The pilot light 9 illuminates to indicate that the
appliance starts operating and the door is
locked.
0
E20
132969940.qxd 02/10/2007 16.07 Pagina 17
Page: 17
18
IMPORTANT!
If an option which is not compatible with the set
wash programme is selected, the message Err
is displayed for few seconds and the red light
of this button flashes for 3 times.
Altering an option or a running programme
It is possible to change any option before the
programme carries it out.
Before you make any change, you must pause
the washing machine by pressing button 8.
Changing a running programme is possible
only by resetting it. Turn the programme
selector dial to «O» and then to the new
programme position. Start the new programme
by depressing button 8 again.
The washing water in the tub will not empty
out.
Interrupting a programme
Depress tbutton 8 to interrupt a programme
which is running, the corresponding light starts
to flash. Depress the button again to restart the
programme.
Cancelling a programme
Turn the selector dial to «O» to cancel a
programme which is running. Now you can
select a new programme.
Opening the door after the programme has
started
First set the machine to pause by pressing the
button 8.
If the light 9 goes off, the door can be opened.
If it does not go off, this means that the
machine is already heating, that the water level
is above the bottom edge of the door. In this
cases the door cannot be opened.
If you cannot open the door but you need to
open it you have to switch the machine off by
turning the selector dial to «O». The door can
be opened after few minutes.
(Pay attention to the water level and
temperature!).
After this procedure, it will be necessary to set
the programme and the options again and then
to depress button 8.
At the end of the programme
The washer dryer stops automatically. Some
acustic signals sound and on the display will
appear a flashing «0». The button 8 light and
the light 9 go off. The door can be opened.
If, at the end of a programme, there is water in
the tub (light 9 still on), to empty out the water
follow the following instructions:
To empty out the water:
1. turn the programme selector dial to «O»
2. select the Drain»or «Spin» programme
3. reduce the spin speed, if needed, by means
of the button 2
4. depress button 8
5. at the end of the programme, the display
shows a flashing zero «0», the light 9 goes
off and it will be possible to open the door.
Turn the programme selector dial to «O» to
switch the machine off.
Remove the laundry from the drum and
carefully check that the drum is empty.
If you do not intend to carry out another wash,
close the water tap.
Leave the door open to prevent the formation
of mildew and unpleasant smells.
132969940.qxd 02/10/2007 16.07 Pagina 18
Page: 18
19
The max load to dry in your washer -dryer is 3
kg for cotton and 2 kg for synthetics.
The water tap must be open and the drain
hose must be positioned in the sink or connect-
ed to the drain pipe.
1. Load the laundry.
2. Turn the selector dial to «Cotton» or
«Synthetics» programme in the «Drying»
sector.
3. For the automatic drying, «Store dry»
(only for synthetics) or «Iron dry»,
depress the button 3 until the light corre-
sponding to the desired dryness degree for
synthetics or cotton illuminates.
4. For the timed drying, depress the button 4
until the time you want appears on the dis-
play (see the drying programmes).
5. Press the button 8 to start the programme.
6. At the end of the programme, the buzzer
sounds. A flashing zero «0» will appear on
the display.
At this point, begins the anti-crease phase
which lasts for about 10 minutes. During
this time the anti-crease phase simbol
appears on the display and the door cannot
be opened.
Note!
If you whish to open the door before or
during the anti-crease phase or to interrupt
it, press any button or turn the programme
selector dial to any programme position
(except «O»), the door can be immediately
opened.
7. Turn the selector dial to the «O» position to
switch the machine off. Remove the laun-
dry.
Drying only
Autodrying (NON-STOP programme)
Warning!
For NON-STOP programmes, it is
essential not to exceed the maximum load
sizes of 3 kg for cotton and 2 kg for
synthetics.
Do not use a dosing device/ball when
carrying out a washing & drying pro-
gramme.
1. Load the laundry.
2. Add detergent and fabric softener.
3. Switch the machine on by turning the
selector dial to the selected wash pro-
gramme/fabric.
4. Select the dryness degree or the dry-
ing time (see the drying programmes).
5. Select the required options by means of the
relevant buttons. If possible, do not select a
spin speed lower than that proposed by the
appliance to avoid a too long drying time so
saving energy.
In any case the reduction of the spin speed is
only possible after selecting drying.
The lowest value with automatic drying is
900 r.p.m. for cottons and synthetics
The lowest value with timed drying you can
select is 700 r.p.m. for synthetics
6. Start the programme by depressing the button
8.
7. At the end of the programme, turn the selector
dial to the «O» position to switch the machine
off.
8. Remove the laundry.
132969940.qxd 02/10/2007 16.07 Pagina 19
Page: 19
20
Degree of drying Type of fabric Spin speed
Drying time
mins
1200 rpm 85-95
3 kg
1200 rpm 45-55
1.5 kg
Store dry (*)
Suitable for items to
put away without
ironing
Cotton and linen (bathrobes,
bath towels, etc
Synthetics and mixed fabrics
(jumpers, blouses, under-
wear, household linen)
900 rpm
2 kg 70-80
900 rpm
1 kg
(*) The Store dry drying programme for
«Cottons» is the reference programme
for the Energy Label data, in compliance
with EC directive 92/75.
Max Load
Iron dry
Suitable
for ironing
Cotton and linen (sheets,
tablecloths, shirts, etc.)
Drying programmes
1200 rpm 70-80
1200 rpm 40-50
3 kg
1.5 kg
132969940.qxd 02/10/2007 16.07 Pagina 20
35-45
Page: 20
21
IMPORTANT!
You must DISCONNECT the appliance from
the electricity supply, before you can carry out
any cleaning or maintenance work.
Descaling
The water we use normally contains lime. It is
a good idea to periodically use a water
softening powder in the machine. Do this
separately from any laundry washing, and
according to the softening powder
manufacturer's instructions. This will help to
prevent the formation of lime deposits.
Maintenance Wash
With the use of low temperature washes it is
possible to get a build up of residues inside the
drum.
We recommend that a maintenance wash be
performed on a regular basis.
To run a maintenance wash:
● The drum should be empty of laundry.
● Select the hottest cotton wash programme.
● Use a normal measure of detergent, must be
a powder with biological properties.
External cleaning
Clean the exterior cabinet of the appliance with
soap and water only, and then dry thoroughly.
Cleaning the dispenser drawer
The washing powder and additive dispenser
drawer should be cleaned regularly.
To aid cleaning, the top part of the additive
compartment should be removed.
Remove the drawer by pressing the catch
downwards and by pulling it out. Flush it out
under a tap, to remove any traces of
accumulated powder.
Cleaning the drawer recess
Having removed the
drawer, use a small
brush to clean the
recess, ensuring that
all washing powder
residue is removed
from the upper and
lower
part of the recess.
Replace the drawer and run the rinse
programme without any clothes in the drum.
Cleaning the pump
The pump should be inspected if
• the machine does not empty and/or spin
• the machine makes an unusual noise during
draining due to objects such as safety pins,
coins etc. blocking the pump.
Proceed as follows:
• disconnect the appliance.
• if the appliance is operating, wait, if
necessary, until the water has cooled down.
• open the pump door levering on the groove
with a coin (or with the suitable tool, that you
can find in the bag containing the instruction
booklet depending on the model).
• place a bowl with a small edge close to the
pump to collect any spillage
Care and cleaning
132969940.qxd 02/10/2007 16.08 Pagina 21
Page: 21
22
• pull out the emergency emptying cap from the
filter cover, using a pliers.
• when no more water comes out, unscrew the
pump cover, using a pliers, and remove the
filter. Always keep a rag nearby to dry up
spillage of water when removing the cover.
• Remove any objects from the pump impeller
by rotating it.
• replace the emergency emptying cap into the
filter cover and fix it firmly.
1
2
1
2
• Close the pump
door.
IMPORTANT!
When the appliance is in use and depending
on the programme selected there can be hot
water in the pump.
Never remove the pump cover during a wash
cycle, always wait until the appliance has
finished the cycle, and is empty. When
replacing the cover, ensure it is securely
retightened so as to stop leaks and young
children being able to remove it.
Cleaning the water inlet filter
If your water is very hard or contains traces of
lime deposit, the water inlet filter may become
clogged.
It is therefore a good idea to clean it from time
to time.
Turn off the water tap.
Unscrew the water
inlet hose. Clean the
filter using a hard
bristle brush. Tighten
up the inlet hose.
The dangers of freezing
If the machine is exposed to temperatures
below 0°C, certain precautions should be
taken:
• pull out the plug from the power socket;
132969940.qxd 02/10/2007 16.08 Pagina 22
Page: 22
23
• turn off the water tap.
• unscrew the inlet hose.
• place a bowl with a small edge close to the
pump to collect any spillage from the
emergency emptying hose.
Place the end of the inlet hose in a bowl
placed on the floor and let water drain out.
• screw the water inlet hose back on and
reposition the emergency emptying cap on
again into the filter cover.
• when you intend to start the machine up
again, make sure that the room temperature
is above 0°C.
IMPORTANT!
Every time you drain the water through the
emergency emptying hose you must pour 2
litres of water into the main wash compartment
of the detergent drawer and then run the drain
programme. This will activate the ECO VALVE
device avoiding that part of the detergent
remains unused at next washing.
Emergency emptying out
If the water is not discharged, proceed as
follows to empty out the machine:
• pull out the plug from the power socket;
• close the water tap;
• if necessary, wait until the water has cooled
down;
• open the pump door using the suitable tool;
• place a bowl with a small edge close to the
pump to collect any spillage. Remove the
emergency emptying cap from the filter
cover. The water should drain by gravity into
the bowl. When the bowl is full, put the cap
back on filter cover. Empty the bowl. Repeat
the procedure until water stops flowing out;
• clean the pump if necessary as previously
described;
• replace the filter into the pump and screw it
firmly as previously described;
• replace the emergency emptying cap into the
filter cover and close the pump door.
132969940.qxd 02/10/2007 16.08 Pagina 23
Page: 23
24
Malfunction Possible Cause / Solution
The washer-dryer does not start:
The door has not been closed. E40
• Close firmly the door.
The plug is not properly inserted in the power socket.
• Insert the plug into the power socket.
There is no power at the socket.
• Please check your domestic electrical installation.
The main fuse has blown.
• Replace the fuse.
The selector dial is not correctly positioned and the
button 8 has not been depressed.
• Please turn the selector dial and press the button 8
again.
The «Child Safety Lock» or the «Delay start»
function option has been selected.
• Disable the «Child Safety Lock» or the «Delay
start» function.
The machine does not fill:
The water tap is closed. E10
• Open the water tap.
The inlet hose is squashed or kinked. E10
• Check the inlet hose connection.
The filter in the inlet hose is blocked. E10
• Clean the water inlet hose filter.
The door is not properly closed. E40
• Close firmly the door.
Something not working
IMPORTANT!
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily
without calling out an engineer. Before contacting your local Service Centre, please carry out the
checks listed below.
During machine operation it is possible that the red pilot light of the button 8 flashes, the buzzer
sounds and one of the following alarm codes appears on the display to indicate that the machine
is not working.
● E10: problem with the water supply
● E20: problem with water draining
● E40: door open.
Once the problem has been eliminated, press the button 8 to restart the programme. If after all
checks, the problem persists, contact your local Service Centre.
132969940.qxd 02/10/2007 16.08 Pagina 24
Page: 24
25
Malfunction Possible Cause / Solution
The machine fills then empties
immediately:
The end of the drain hose is too low.
• Refer to relevant paragraph in «water drainage»
section.
The machine does not empty and/or
does not spin:
The drain hose is squashed or kinked. E20
• Check the drain hose connection.
The drain pump is clogged. E20
• Clean the drain pump.
The option has been selected.
• Select the Drain or Spin programmes
The laundry is not evenly distributed in the drum.
• Redistribute the laundry.
There is water on the floor:
Too much detergent or unsuitable detergent (creates
too much foam) has been used.
• Reduce the detergent quantity or use another one.
Check whether there are any leaks from one of the
inlet hose fittings. It is not always easy to see this as
the water runs down the hose; check to see if it is
damp.
• Check the water inlet hose connection.
The inlet hose is damaged.
• Change it with a new one.
The cap on the emergency emptying hose has not
been replaced after cleaning the pump.
• Put the cap back on the emergency emptying and
place the latter back in its seat.
Unsatisfactory washing results:
Too little detergent or unsuitable detergent has been
used.
• Increase the detergent quantity or use another one.
Stubborn stains have not been treated prior to
washing.
• Use commercial products to treat the stubborn
stains.
The correct temperature was not selected.
• Check if you have selected the correct
temperature.
Excessive laundry load.
• Introduce into the drum less laundry.
132969940.qxd 02/10/2007 16.08 Pagina 25
Page: 25
26
The machine vibrates or is noisy:
The transit bolts and packing have not been
removed.
• Check the correct installation of the appliance.
The support feet have not been adjusted.
• Check the correct levelling of the appliance.
The laundry is not evenly distributed in the drum.
• Redistribute the laundry.
Maybe there is very little laundry in the drum.
• Load more laundry.
Malfunction Possible Cause / Solution
The door will not open:
The programme is still running.
• Wait the end of washing cycle.
The door lock has not been released.
• Wait untill the light 9 has gone off.
There is water in the drum.
• Select drain or spin programme to empty out the
water.
Spinning starts late or the machine
does not spin:
The electronic unbalance detection device has cut in
because the laundry is not evenly distributed in the
drum. The laundry is redistributed by reverse rotation
of the drum. This may happen several times before
the unbalance disappears and normal spinning can
resume. If, after 10 minutes, the laundry is still not
evenly distributed in the drum, the machine will not
spin. In this case, redistribute the load manually and
select the spin programme.
● Redistribute the laundry.
The machine makes an unusual noise
The machine is fitted with a type of motor which
makes an unusual noise compared with other
traditional motors. This new motor ensures a softer
start and more even distribution of the laundry in the
drum when spinning, as well as increased stability of
the machine.
132969940.qxd 02/10/2007 16.08 Pagina 26
Page: 26
27
Malfunction Possible Cause / Solution
No water is visible in the drum
Machines based on modern technology operate very
economically using very little water without affecting
performance.
If you are unable to identify or solve the
problem, contact our service centre.
Before telephoning, make a note of the model,
serial number and purchase date of your
machine: the Service Centre will require this
information. Mod. ... ... ...
Prod. No. ... ... ...
Ser. No. ... ... ...
Mod.
...
...
...
Prod
.
No.
...
...
..
Ser.
No.
...
...
...
The machine does not dry or does not dry
properly
The drying time has not been selected.
• Select the drying time.
The water tap is not turned on (E10)
• Open the water tap.
The drain filter is clogged (E20)
• Clean the drain filter.
The machine is overloaded.
• Introduce into the drum less laundry.
The selected drying programme or time/degree was
not suitable for the laundry.
• Select the suitable drying programme or time/degree
for the laundry.
132969940.qxd 02/10/2007 16.08 Pagina 27
Page: 27
28
Technical data
Dimensions Width 60 cm
85 cm
63 cm
Height
Depth (inclunding the porthole)
Water supply pressure Minimum 0,05 MPa
0,8 MPa
Maximum
Cotton
Synthetics
Delicates
(Woollens) Handwash
Maximum Washing Load 6.0 kg
3.0 kg
3.0 kg
2.0 kg
Maximum
Spin Speed 1200 rpm
Electrical connection Voltage -
Overall power - Fuse
Information on the electrical connection is given on the rating
plate on the inner edge of the appliance door
Cotton
Synthetics
Maximum Drying Load 3. 0 kg
2 kg
132969940.qxd 02/10/2007 16.08 Pagina 28
Page: 28
29
Consumption values
Programme
duration
(in minutes)
Programme Energy
consumption
(in kWh)
Water
consumption
(in litres)
Cottons 90°C 2.0 61
Cottons 60° Eco(*) 1.02 54
Cottons 60°C 1.3 58
Cottons 60° + Prewash 1.45 68
Synthetics Easy Iron 40°C 0.35 60
Delicates 40°C 0.55 60
Handwash 40°C 0.4 53
Jeans 40°C 0.55 55
Sport Intensive 40°C 0.65 59
Rinses 0.1 42
Spin - -
Drain - -
Synthetics 60°C 1.0 54
Cottons 40°C 0.7 58
Cottons 40°C + Prewash 0.85 54
Cottons 90° + Prewash 2.15 71
Information
The consumption data shown on this chart is
to be considered purely indicative, as it may
vary depending on the quantity and type of
laundry, on the inlet water temperature and on
the ambient temperature. It refers to the
highest temperature for each wash
programme.
(*)The “Cottons 60° Eco” is the reference
programme with a load of 6 kg for the data
entered in the energy label, in compliance
with EEC 92/75 standards.
For
the
duration
of
the
programmes,
please
refer
to
the
display
on
the
control
panel
132969940.qxd 02/10/2007 16.08 Pagina 29
Page: 29
30
Installation instruction
Unpacking
All transit bolts and packing must be removed
before using the appliance.
You are advised to keep all transit devices so
that they can be refitted if the machine ever
has to be transported again.
1. After removing all the packaging, carefully
lay machine on it’s back to remove the
polystyrene base from the bottom.
2. Remove the power supply cable and the
draining hose from the hose holders on the
rear of the appliance.
3. With a suitable spanner unscrew and
remove the central rear bolt A.
4. Unscrew and remove the two large rear
bolts B and the six smaller bolts C.
C
C
E
D
C
C
B
B
A
5. Remove the bracket D, refit the six smaller
bolts C and slide out the relevant plastic
spacer E.
6. Open the porthole, take out the inlet hose
from the drum and remove the polystyrene
block fitted with the adhesive tape on the
door seal.Open the porthole, take out the
inlet hose from the drum and remove the
polystyrene block fitted with the adhesive
tape on the door seal.
7. Fill the smaller upper hole and the two large
ones with the corresponding plastic plug
caps supplied in the bag containing the
instruction booklet.
Positioning
Install the machine on a flat hard floor. Make
sure that air circulation around the machine is
not impeded by carpets, rugs etc.
Check that the machine does not touch the
wall or other kitchen units.
Levelling
Level the washer-dryer by raising or lowering
the feet. The feet may be tight to adjust as they
incorporate a self locking nut, but the machine
MUST be level and stable.
If necessary, check the
setting with a spirit
level.
132969940.qxd 02/10/2007 16.08 Pagina 30
Page: 30
31
Any necessary adjustment can be made with a
spanner. Accurate levelling prevents vibration,
noise and displacement of the machine during
operation.
Never place cardboard, wood or similar
materials under the machine to compensate for
any unevenness in the floor.
Some vibration is inevitable, especially if
mounted on a wooden floor.
Sprung woden floors are particularly
susceptible to vibration. For advice, consult a
builder. If possible, always place the machine
on a solid floor.
Water inlet
An inlet hose is supplied and can been found
inside the machine drum.
Do not use the hose from your previous
machine to connect to the water supply.
1. Open the porthole and extract the inlet
hose.
2. Connect the hose with the angled
connection to the machine.
Do not place the inlet hose downwards.
Angle the hose to the left or right depending
on the position of your water tap.
3.Set the hose
correctly by
loosening the ring
nut.
After positioning the
inlet hose, be sure to
tighten the ring nut
again to prevent
leaks.
4. Connect the hose to a tap with a 3/4” thread.
Always use the hose supplied with the
appliance. The inlet hose must not be
lengthened. If it is too short and you do not
wish to move the tap, you will have to
purchase a new, longer hose specially
designed for this type of use.
4
5
°
3
5
°
Water drainage
The end of the drain hose can be positioned in
three ways:
Hooked over the
edge of a sink using
the plastic hose
guide supplied with
the machine. In this
case, make sure the
end cannot come
unhooked when the
machine is emptying. This could be done by
tying it to the tap with a piece of string or
attaching it to the wall.
In a sink drain pipe branch. This branch
must be above the trap so that the bend is at
least 60 cm above the ground.
Directly into a drain pipe at a height of not
less than 60 cm and not more than 90 cm.
The end of the drain hose must always be
ventilated, i.e. the inside diameter of the drain
pipe must be larger than the outside diameter
of the drain hose.
The drain hose must not be kinked.
132969940.qxd 02/10/2007 16.08 Pagina 31
Page: 31
32
Important!
Before connecting the machine to new
pipework or to pipework that has not been
used for some time, run off a reasonable
amount of water to flush out any debris that
may have collected in the pipes.
Electrical connection
This machine is designed to operate on a 220-
230 V, single-phase, 50 Hz supply.
Check that your domestic electrical installation
can take the maximum load required (2.2 kW),
also taking into account any other appliances
in use.
Attention!
Connect the machine to an earthed socket.
The manufacturer declines any responsibility
for damage or injury through failure to comply
with the above safety precaution.
WARNING!
Before any work to the appliance, you must
disconnect the plug from the power socket.
Important!
For safety reasons, it is dangerous to fit the
appliance under a counter without the steel
plate, which you can order in your nearest
Service Force Centre.
Fitting under a counter
The top must be fixed to the cabinet as follows:
Unscrew the screws from the back panel of the
appliance. Push the worktop to the back and
raise it to remove. (see the picture below).
820
600
600
600
595
820
Attention!
Should the appliance power supply cable
need to be replaced, this MUST be carried out
by our Service Centre.
NOTE
Please ensure that when the appliance is
installed it is easily accessible for the
engineer in the event of a breakdown.
Permanent connection
In the case of permanent connection it is
necessary that you install a double pole
switch between the appliance and the
electricity supply (mains), with a minimum gap
of 3mm between the switch contacts and of a
type suitable for the required load in
compliance with the current electrical
regulations.
The switch must not break the yellow and
green earth cable at any point.
132969940.qxd 02/10/2007 16.08 Pagina 32
Page: 32
33
Environmental concerns
Packaging materials
The materials marked with the symbol are
recyclable.
>PE<=polyethylene
>PS<=polystyrene
>PP<=polypropylene
This means that they can be recycled by
disposing of them properly in appropriate
collection containers.
Old machine
Use authorised disposal sites for your old
appliance. Help to keep your country tidy!
The symbol on the product or on its
packaging indicates that this product may not
be treated as household waste. Instead it shall
be handed over to the applicable collection
point for the recycling of electrical and
electronic equipment. By ensuring this product
is disposed of correctly, you will help prevent
potential negative consequences for the
environment and human health, which could
otherwise be caused by inappropriate waste
handling of this product. For more detailed
information about recycling of this product,
please contact your local city office, your
household waste disposal service or the shop
where you purchased the product.
Ecological hints
To save water, energy and to help protect the
environment, we recommend that you follow
these tips:
● Normally soiled laundry may be washed
without prewashing in order to save
detergent, water and time (the environment
is protected too!).
● The machine works more economically if it is
fully loaded.
● With adequate pre-treatment, stains and
limited soiling can be removed; the laundry
can then be washed at a lower temperature.
● Measure out detergent according to the
water hardness, the degree of soiling and
the quantity of laundry being washed.
132969940.qxd 02/10/2007 16.08 Pagina 33
Page: 33
34
European guarantee
This appliance is guaranteed by Electrolux, in
each of the countries listed in the following
page, for the period specified in the appliance
guarantee or otherwise by law. If you move
from one of these countries to another of these
countries the appliance guarantee will move
with you subject to the following qualifications:
● The appliance guarantee starts from the
date you first purchased the appliance
which will be evidenced by production of a
valid purchase document issued by seller
of the appliance.
● The appliance guarantee is for the same
period and to the same extent for labour
and parts as exists in your country of
residence for this particular model or range
of appliances.
● The appliance guarantee is personal to the
original purchaser of the appliance and
cannot be transferred to another user.
● The appliance is installed and used in
accordance with instructions issued by
Electrolux and is only used within the
home, i.e. is not used for commercial
purposes.
● The appliance is installed in accordance
with all relevant regulations in force within
your new country of residence.
The provisions of this European Guarantee do
not affect any of the rights granted to you by
law.
Guarantee
132969940.qxd 02/10/2007 16.08 Pagina 34
Page: 34
35
www.electrolux.com
à  
Albania +35 5 4 261 450 Rr. Pjeter Bogdani Nr. 7 Tirane
Belgique/België/Belgien +32 2 363 04 44 Bergensesteenweg 719, 1502 Lembeek
Česká republika +420 2 61 12 61 12 Budějovická 3, Praha 4, 140 21
Danmark +45 70 11 74 00 Sjællandsgade 2, 7000 Fredericia
Deutschland +49 180 32 26 622 Muggenhofer Str. 135, 90429 Nürnberg
Eesti +37 2 66 50 030 Mustamäe tee 24, 10621 Tallinn
España +34 902 11 63 88 Carretera M-300, Km. 29,900 Alcalá de Henares Madrid
France www.electrolux.fr
Great Britain +44 8705 929 929 Addington Way, Luton, Bedfordshire LU4 9QQ
Hellas +30 23 10 56 19 70 4, Limnou Str., 54627 Thessaloniki
Hrvatska +38 51 63 23 338 Slavonska avenija 3, 10000 Zagreb
Ireland +353 1 40 90 753 Longmile Road Dublin 12
Italia +39 (0) 434 558500 C.so Lino Zanussi, 26 - 33080 Porcia (PN)
Latvija +37 17 84 59 34 Kr. Barona iela 130/2, LV-1012, Riga
Lituania +370 5 27 80 609 Verkiu,2 9, 09108 Vilnius, Lithuania
Luxembourg +35 2 42 43 13 01 Rue de Bitbourg, 7, L-1273 Hamm
Magyarország +36 1 252 1773 H-1142 Budapest XIV, Erzsébet királyné útja 87
Nederland +31 17 24 68 300 Vennootsweg 1, 2404 CG - Alphen aan den Rijn
Norge +47 81 5 30 222 Risløkkvn. 2 , 0508 Oslo
Österreich +43 18 66 400 Herziggasse 9, 1230 Wien
Polska +48 22 43 47 300 ul. Kolejowa 5/7, Warsaw
Portugal +35 12 14 40 39 39 QuintadaFonte-EdificioGonçalvesZarco-Q35-2774-518PaçodeArcos
Romania +40 21 451 20 30 Str. Garii Progresului 2, S4, 040671 RO
Schweiz-Suisse-Svizzera +41 62 88 99 111 Industriestrasse 10, CH-5506 Mägenwil
Slovenija +38 61 24 25 731 Tr aška 132, 1000 Ljubljana
Slovensko +421 2 43 33 43 22 ElectroluxSlovakias.r.o.,ElectroluxDomácespotrebičeSK,Seberíniho1,82103Bratislava
Suomi www.electrolux.fi
Sverige +46 (0)771 76 76 76 Electrolux Service, S:t Göransgatan 143, S-105 45 Stockholm
Türkiye +90 21 22 93 10 25 Tarlabași caddesi no : 35 Taksim Istanbul
Россия +7 095 937 7837 129090 Москва, Олимпийский проспект, 16, БЦ “Олимпик”
132969940.qxd 02/10/2007 16.08 Pagina 35
Page: 35
www.electrolux.com
Subject to change without notice
132969990
132969940.qxd 02/10/2007 16.08 Pagina 36

Question & answers

There are no questions about the Zanussi ZKG2145 yet.

Ask a question about the Zanussi ZKG2145

Have a question about the Zanussi ZKG2145 but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Zanussi ZKG2145. Please make sure that you describe your difficulty with the Zanussi ZKG2145 as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.