Zanussi ZHC9244X manual

View a manual of the Zanussi ZHC9244X below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Zanussi
  • Product: Exhaust hood
  • Model/name: ZHC9244X
  • Filetype: PDF
  • Available languages: Dutch, English, German, French, Spanish, Italian, Swedish, Portuguese, Danish, Polish, Finnish, Romanian, Turkish, Slovak, Hungarian, Croatian, Ukrainian

Table of Contents

Page: 51
52
Welcome to the world of Electrolux
Thank you for choosing a first class product
from Electrolux, which hopefully will provide
you with lots of pleasure in the future. The
Electrolux ambition is to offer a wide variety of
quality products that make your life more
comfortable. You find some examples on the
cover in this manual. Please take a few
minutes to study this manual so that you can
take advantage of the benefits of your new
machine. We promise that it will provide a
superior User Experience delivering Ease-of-
Mind.
Good luck!
Page: 52
53
Contents
Safety warnings ..............................................54
Description of the Appliance ...........................56
Control Panel..................................................58
Maintenance and Care ...................................59
Cleaning the hood ..........................................61
Special accessories........................................62
Technical Details ............................................62
Electrical connection ......................................63
Installation ......................................................65
Page: 53
54
Safety warnings
• When used as an extractor unit, the hood
must be fitted with a hose having preferably
the same diameter as the outlet hole.
Should there already be a pipe of diameter
125 mm that ducts to the outside through the
walls or roof, it is possible to use the 150/125
mm reduction flange provided. In this case
the hood will be slightly noisier.
Attention: The hose is not supplied and must
be purchased separately.
• The minimum distance between the
supporting surface for the cooking vessels on
the hob and the lowest part of the range hood
must be not less than 50cm from electric
cookers and 65cm from gas or mixed
cookers.
If the instructions for installation for the gas
hob specify a greater distance, this must be
adhered to.
• Before any cleaning or maintenance
operation, disconnect the hood from the
mains by removing the plug or disconnecting
the home mains switch.
• The appliance is not intended for use by
children or persons with impaired physical,
sensorial or mental faculties, or if lacking in
experience or know-how, unless they are
under supervision or have been trained in the
use of the appliance by a person responsible
for their safety.
• Children should be monitored to ensure that
they do not play with the appliance.
• Never use the hood without effectively
mounted grating.!
• The hood must NEVER be used as a support
surface unless specifically indicated.
• The premises must be sufficiently ventilated,
when the kitchen hood is used together with
other gas combustion devices or other fuels.
• The suctioned air must not be conveyed into
a conduit used for the disposal of the fumes
generated by appliances that combust gases
or other fuels.
• The flaming of foods beneath the hood itself
is severely prohibited.
• The use of exposed flames is detrimental to
the filters and may cause a fire risk, and must
therefore be avoided in all circumstances.
• Any frying must be done with care in order to
make sure that the oil does not overheat and
burst into flames.
• As regards the technical and safety measures
to be adopted for fume discharging it is
important to closely follow the relations
provided by the competent authorities.
• The hood must be regularly cleaned on both
the inside and outside (AT LEAST ONCE A
MONTH, it is in any event necessary to
proceed in accordance with the maintenance
instructions provided in this manual)..
• Failure to follow the instructions as concerns
hood and filter cleaning will lead to the risk of
fires.
• Do not use or leave the hood without the
lamp correctly mounted because of the
possible risk of electric shocks.
• We decline any responsibility for any
problems, damage or fires caused to the
appliance as the result of the non-observance
of the instructions included in this manual.
Page: 54
55
This appliance is marked according to the
European directive 2002/96/EC on Waste
Electrical and Electronic Equipment (WEEE).
By ensuring this product is disposed of correctly,
you will help prevent potential negative
consequences for the environment and human
health, which could otherwise be caused by
inappropriate waste handling of this product.
The symbol on the product, or on the
documents accompanying the product, indicates
that this appliance may not be treated as
household waste. Instead it shall be handed
over to the applicable collection point for the
recycling of electrical and electronic equipment.
Disposal must be carried out in accordance with
local environmental regulations for waste
disposal.
For more detailed information about treatment,
recovery and recycling of this product, please
contact your local city office, your household
waste disposal service or the shop where you
purchased the product.
Page: 55
56
Ø 120 mm
Ø 150 mm
Description of the Appliance
• The cooker hood is designed to extract
unpleasant odours from the kitchen, it will
not extract steam.
• The hood is supplied as an extractor unit and
can also be used with a recirculation mode by
fitting a charcoal filter.
• You will need an original charcoal filter for the
recirculation mode. (See Special
Accessories).
Extraction mode
• In this mode fumes are extracted to the outside via a hose connected to the coupling ring.
• In order to obtain the best performance the hose should have a diameter equal to the outlet hole.
Top Rear
Top
Rear
Coupling ring
Page: 56
57
Ø
150 mm
Recirculation mode
• The air is filtered through a charcoal filter
and returned to the kitchen.
• You will need an original charcoal filter for the
recirculation mode. (See Special
Accessories).
Page: 57
58
Control Panel
• Best results are obtained by using a low speed for normal conditions and a high speed when
odours are more concentrated.
Turn the hood on a few minutes before you start cooking.
The hood should be left on after cooking for about 15 minutes or until all the odours have
disappeared.
The control switches are located on the unit’s front panel:
Light switch
Motor switch
/
Speed 1
• the light switch switches the hood lamp on and off
• the motor switch switches the motor off
Speed 1: Speed 1 push-button
• Speed 2: Speed 2 push-button
• Speed 3: Speed 3 push-button
Speed 2
Speed 3
Page: 58
59
Maintenance and Care
• Warning! Before performing any maintenance operation, isolate the hood from the
electrical supply by switching off at the connector and removing the connector fuse.
Or if the appliance has been connected through a plug and socket, then the plug must be
removed from the socket.
Metal grease filter
• The purpose of the grease filters is to absorb
grease particles which form during cooking
and it must always be used, either in the
external extraction or internal re-circulation
function.
Attention: the metal grease filters must be
removed and washed, either by hand or in the
dishwasher, every four weeks.
Removing the metal grease filter
• Use the spring handle and remove the filter
downward.
Hand washing
Soak grease filters for about one hour in hot
water with a grease-loosening cleaner, then
rinse off thoroughly with hot water. Repeat the
process if necessary. Refit the grease filters
when they are dry.
Dishwasher
Place grease filters in the dishwasher. Select
most powerful washing programme and
highest temperature, at least 65°C. Repeat
the process. Refit the grease filters when they
are dry.
• Attention! When washing the metal grease
filter in the dishwasher a slight discolouration
of the filter can occur, this does not have any
impact on its performance.
• Clean the inner housing using a hand hot
solution only(never use caustic detergents,
abrasive powders or brushes).
Page: 59
60
Charcoal filter
• The charcoal filter should only be used if you
want to use the hood in recirculation mode.
• To do this you will need an original charcoal
filter (available from your local Service Force
Centre).
• Cleaning/replacing the charcoal filter
Unlike other charcoal filters, the LONGLIFE
charcoal filter can be cleaned and reactivated.
With normal use the filter should be cleaned
every second month (when using the hood
2.5 hours per day,on avarage). The best way
to clean the filter is in the dishwasher. Use
normal detergent and choose the highest
temperature (65º C). Wash the filter
separately so that no food parts gets stuck on
the filter and later causes bad odours. To
reactivate the charcoal, the filter should be
dried in an oven for 10 minutes with a
maximum temperature of 100º C.
After approximately three years of use, the
charcoal filter should be replaced with a new
one, as the odour reduction capacity will be
reduced.
g g
j
h
i
g
g
• Fitting
Remove the grease filters.
Remove the frame i which supports the filter
h by turning 90° the two knobs g.
Insert the charcoal filter inside the frame and
put all parts back in their place.
Refit the grease filters.
It is possible to use a traditional charcoal filter
(Type 15), neither washable nor regenerable, to
be replaced every 3 - 4 months.
The filter holder frame of the charcoal filter is
welded together; the eventual frame supplied
with the hood is not, therefore, to be used.
Insert it into its housing and fix it turning the 2
plastic knobs.
• To remove proceed in the reverse order.
• Always specify the hood model code number
and serial number when ordering replacement
filters. This information is shown on the rating
plate located on the inside of the unit.
• The charcoal filter can be ordered from your
local Service Force Centre.
Page: 60
61
Warning
• Failure to observe the instructions on cleaning
the unit and changing the filters will cause a
fire hazard. You are therefore strongly
recommended to follow these instructions.
• The manufacturer declines all responsibility
for any damage to the motor or any fire
damage linked to inappropriate maintenance
or failure to observe the above safety
recommendations.
Changing the light bulb(s)
• Disconnect the cooker hood from the
mains supply.
• Prior to touching the light bulbs ensure
they are cooled down.
Cleaning the hood
• Clean the outside of the hood using a damp cloth and a solution of water and mild washing up
liquid.
• Never use corrosive, abrasive or flammable cleaning products or products containing bleach.
• Never insert pointed objects in the motor’s protective grid.
• Only ever clean the switch panel and filter grill using a damp cloth and mild washing up liquid.
• Clean all the plastic parts with a soft cloth soaked in warm water and neutral soap.
• It is extremely important to clean the unit and change the filters at the recommended intervals.
Failure to do so will cause grease deposits to build up that could constitute a fire hazard.
• Extract the lamp cover by using a small flat
screwdriver or similar tool as a lever.
• Replace the old bulb with a new one of the
same type.
• Refit the lamp cover.
• If the light does not come on, make sure the
bulb has been inserted in correctly before
contacting your local Service Force Centre.
Page: 61
62
Special accessories
Charcoal filter Type 20 (LONG LIFE)
Charcoal filter Type 15
Technical Details
ZHC 6244 ZHC 9244
Dimensions (in cm):
Height (Extract. mode): 62,2-115,2 62,2-115,2
Height (Recirc. mode): 69,9-115,2 69,9-115,2
Width: 59,8 89,8
Depth: 45 45
Max. absorb. power: 160 W 160 W
Motor: 120 W 120 W
Lighting: 2 x 20 W (G4) 2 x 20 W (G4)
Length of the cable: 150 cm 150 cm
Electrical connection: 220-240 V 220-240 V
Fuse rating: 5At 5At
Mounting accessories included
1 allen wrench (for TORX screws).
1 deflector ,
1 reduction flange Ø 125-120 mm ,
1 chimney support,
6 wood-screws 5 x 45 mm (for wall mounting) ,
6 Wall dowels Ø 8 mm (for wall mounting) ,
2 washers
2 screws 2,9 x 6,5 (2 to fix the upper chimney)
2 metal screws 3 x 9 (to fix the deflector).
Page: 62
63
Electrical connection
Safety warnings for the electrician
The mains power supply must correspond to the rating indicated on the plate situated inside the
hood. If provided with a plug connect the hood to a socket in compliance with current regulations
and positioned in an accessible area. If it not fitted with a plug (direct mains connection) or if the
plug is not located in an accessible area apply a bi-polar switch in accordance with standards which
assures the complete disconnection of the mains under conditions relating to over-current category
III, in accordance with installation instructions.
IMPORTANT: Before re-connecting the hood circuit to the mains supply and checking the efficient
function, always check that the mains cable is correctly assembled.
Page: 63
64
Before beginning installation
• In addition check whether near the installation area of the hood (in the area accessible also with
the hood mounted) an electric connection to the mains is available and if it is possible to connect
a fumes discharge device to the outside (Extraction mode only).
• Warning! Do not connect the appliance to the mains until the installation is fully complete.
• Install the electronic box with 2 screws (a-b-c).
OK
b
c
a
Page: 64
65
• Make holes as indicated on the template,
insert the wall dowels and screw 2 screws
into the upper holes, leaving a space of about
1 cm between the head of the screw and the
wall..
Installation
• Apply the perforation diagram to the wall: the
vertical centre line printed on the perforation
diagram should correspond to the centre line
drawn on the wall. In addition, the lower edge
of the perforation diagram corresponds to the
lower edge of the hood.
Note: Always make the holes indicated on the
template. The upper 2 are for hooking the
hood up while the lower holes (generally 2
lateral) are for the definitive and safety fixing.
• Apply flues support bracket to the wall
touching the ceiling. Use the flues support
bracket as a perforation diagram (the small
slot in the support must coincide with the line
previously drawn on the wall, if present), and
mark two holes with a pencil. Make the holes
and insert 2 dowels.
=
=
Ø 8
Ø 8
5x45
Ø 8
• Remove the grease filters.
• Drawing a line on the wall with a pencil up to
the ceiling, corresponding to the centre line,
will make the installation operations easier.
Page: 65
66
• Fix the flues support bracket to the wall with 2
screws.
• Hang the hood to the 2 upper screws.
• Introduce and screw the screws (and
washers) up into the holes for the definitive
fixing (COMPULSORY!!). Then, having
checked the setting of the hood, TIGHTEN
ALL THE upper and lower SCREWS.
• Connect a tube (tube and bands for fixing not
supplied, to be purchased) for discharging the
fumes to the connection ring placed over the
aspiration motor unit.
The other end of the tube should be
connected to a device for expelling fumes on
the outside of the hood in the aspiration
version.
G Ø 8
Ø 5x45
Note: the lower fixing points are visible
removing the grease filters and they are at
the sides of the hood
If you want to use
the filtering version,
fix deflector to flues
support bracket and
connect the other
end of the tube to
the connection ring
placed on deflector.
Page: 66
67
• Connect the electricity.
• Slide the lower section of the flue down to
cover the aspiration set until inserting it
completely into the apposite housing over the
hood.
• Raise the upper flue and fix it above with 2
screws to flues support bracket
• Refit the grease filter.
Page: 75
76
76
76
76
76 electr
electr
electr
electr
electrolux
olux
olux
olux
olux
Guarantee/Customer Service
Standar
Standar
Standar
Standar
Standard guarantee conditions
d guarantee conditions
d guarantee conditions
d guarantee conditions
d guarantee conditions
We, Electrolux, undertake that if within
12 months of the date of the purchase
this Electrolux appliance or any part
thereof is proved to be defective by
reason only of faulty workmanship or
materials, we will, at our option repair or
replace the same FREE OF CHARGE
for labour, materials or carriage on
condition that:
• The appliance has been correctly in-
stalled and used only on the electri-
city supply stated on the rating plate.
• The appliance has been used for
normal domestic purposes only, and
in accordance with the manufactu-
rer’s instructions.
• The appliance has not been ser-
viced, maintained, repaired, taken
apart or tampered with by any per-
son not authorised by us.
• Electrolux Service Force Centre must
undertake all service work under this
guarantee.
• Any appliance or defective part re-
placed shall become the Company’s
property.
• This guarantee is in addition to your
statutory and other legal rights.
Exclusions
Exclusions
Exclusions
Exclusions
Exclusions
• Damage or calls resulting from trans-
portation, improper use or neglect,
the replacement of any light bulbs or
removable parts of glass or plastic.
• Costs incurred for calls to put right an
appliance which is improperly in-
stalled or calls to appliances outside
the United Kingdom.
• Appliances found to be in use within
a commercial environment, plus tho-
se which are subject to rental agree-
ments.
• Products of Electrolux manufacturer
that are not marketed by Electrolux
Service and Spar
Service and Spar
Service and Spar
Service and Spar
Service and Spare Parts
e Parts
e Parts
e Parts
e Parts
In the event of your appliance requiring
service, or if you wish to purchase
spare parts, please contact your local
Service Force Centre by telephoning
0870 5 929 929
0870 5 929 929
0870 5 929 929
0870 5 929 929
0870 5 929 929
Your telephone call will be automatically
routed to the Service Force Centre co-
vering your postcode area.
For the address of your local Service
Force Centre and further information
about Service Force, please visit the
website at
www
www
www
www
www.servicefor
.servicefor
.servicefor
.servicefor
.serviceforce.co.uk
ce.co.uk
ce.co.uk
ce.co.uk
ce.co.uk
Before calling out an engineer, please
ensure you have read the details under
the heading “Something not working”
When you contact the Service Force
Centre you will need to give the follo-
wing details:
1.Your name, address and postcode.
2.Your telephone number.
3. Clear concise details of the fault.
4. The model and Serial number of the
appliance (found on the rating plate).
5.The purchase date.
Please note a valid purchase receipt or
guarantee documentation is required
for in guarantee service calls.
Page: 76
electrolux 77
electrolux 77
electrolux 77
electrolux 77
electrolux 77
Customer Car
Customer Car
Customer Car
Customer Car
Customer Care
e
e
e
e
For general enquiries concerning your
Electrolux appliance, or for further infor-
mation on Electrolux products please
contact our Customer Care
Department by letter or telephone at
the address below or visit our website
at www.electrolux.co.uk
Customer Care Department
Electrolux Major Appliances
Addington Way
Luton
Bedfordshire
LU4 9QQ
Tel: 08705 950 950 (*)
(*) Calls may be recorded for training
purposes
Page: 77
78
78
78
78
78 electr
electr
electr
electr
electrolux
olux
olux
olux
olux
Eur
Eur
Eur
Eur
European Guarantee
opean Guarantee
opean Guarantee
opean Guarantee
opean Guarantee
This appliance is guaranteed by
Electrolux in each of the countries listed
at the back of this user manual, for the
period specified in the appliance
guarantee or otherwise by law. If you
move from one of these countries to
another of the countries listed below
the appliance guarantee will move with
you subject to the following
qualifications:-
• The appliance guarantee starts from
the date you first purchased the
appliance which will be evidenced by
production of a valid purchase
document issued by the seller of the
appliance.
• The appliance guarantee is for the
same period and to the same extent
for labour and parts as exists in your
new country of residence for this
particular model or range of
appliances.
• The appliance guarantee is personal
to the original purchaser of the
appliance and cannot be transferred
to another user.
• The appliance is installed and used in
accordance with instructions issued
by Electrolux and is only used within
the home, i.e. is not used for
commercial purposes.
• The appliance is installed in
accordance with all relevant
regulations in force within your new
country of residence.
The provisions of this European
Guarantee do not affect any of the
rights granted to you by law.
www
www
www
www
www.electr
.electr
.electr
.electr
.electrolux.com
olux.com
olux.com
olux.com
olux.com
Page: 83
Subject to change without notice
www.electrolux.com
LI29GB Ed.04/08

Question & answers

There are no questions about the Zanussi ZHC9244X yet.

Ask a question about the Zanussi ZHC9244X

Have a question about the Zanussi ZHC9244X but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Zanussi ZHC9244X. Please make sure that you describe your difficulty with the Zanussi ZHC9244X as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.