Zanussi ZDI12001XA manual

manual_loading

View a manual of the Zanussi ZDI12001XA below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Zanussi
  • Product: Dishwasher
  • Model/name: ZDI12001XA
  • Filetype: PDF
  • Available languages: Dutch, English, German, French, Portuguese

Table of Contents

Page: 13
D
o
w
n
l
o
a
d
e
d
f
r
o
m
w
w
w
.
v
a
n
d
e
n
b
o
r
r
e
.
b
e
D
o
w
n
l
o
a
d
e
d
f
r
o
m
w
w
w
.
v
a
n
d
e
n
b
o
r
r
e
.
b
e
Contents
Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 14
Product description _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 15
Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 16
Programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 16
Before first use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 17
Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 19
Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 21
Troubleshooting _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 22
Technical information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 24
Environment concerns _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 25
Subject to change without notice
Safety information
Before the installation and use of the appliance, carefully
read the supplied instructions. The manufacturer is not re-
sponsible if an incorrect installation and use causes inju-
ries and damages. Always keep the instructions with the
appliance for future reference.
Children and vulnerable people safety
Warning! Risk of suffocation, injury or permanent
disability.
• Do not let persons, children included, with reduced
physical sensory, reduced mental functions or lack of
experience and knowledge use the appliance. They
must have supervision or instruction for the operation
of the appliance by a person who is responsible for
their safety. Do not let children play with the appliance.
• Keep all packaging away from children.
• Keep all detergents away from children.
• Keep children and pets away from the appliance door
when it is open.
Installation
Warning! This appliance must be installed by a
qualified or competent person.
• Remove all the packaging.
• Do not install or use a damaged appliance.
• Do not install or use the appliance where the tempera-
ture is less than 0 °C.
• Obey the installation instruction supplied with the ap-
pliance.
• Make sure that the appliance is installed below and ad-
jacent to safe structures.
Water connection
• Make sure not to cause damage to the water hoses.
• Before you connect the appliance to new pipes or pipes
not used for a long time, let the water flow until it is
clean.
• The first time you use the appliance, make sure that
there is no leakage.
•
W
Warning! Dangerous voltage.
The water inlet hose has a safety valve and a sheath
with an inner mains cable.
• If the water inlet hose is damaged, immediately discon-
nect the mains plug from the mains socket. Contact
Service to replace the water inlet hose.
Electrical connection
Warning! Risk of fire and electrical shock.
• The appliance must be earthed.
• Make sure that the electrical information on the rating
plate agrees with the power supply. If not, contact an
electrician.
• Always use a correctly installed shockproof socket.
• Do not use multi-plug adapters and extension cables.
• Make sure not to cause damage to the mains plug and
to the mains cable. Contact the Service or an electri-
cian to change a damaged mains cable.
14
Page: 14
D
o
w
n
l
o
a
d
e
d
f
r
o
m
w
w
w
.
v
a
n
d
e
n
b
o
r
r
e
.
b
e
D
o
w
n
l
o
a
d
e
d
f
r
o
m
w
w
w
.
v
a
n
d
e
n
b
o
r
r
e
.
b
e
• Connect the mains plug to the mains socket only at the
end of the installation. Make sure that there is access
to the mains plug after the installation.
• Do not pull the mains cable to disconnect the appli-
ance. Always pull the mains plug.
Use
Warning! Risk of injury.
• Use this appliance in a household environment.
• Do not change the specification of this appliance.
• Put knives and cutlery with sharp points in the cutlery
basket with the points down or in a horizontal position.
• Do not keep the appliance door open without supervi-
sion to prevent to fall on it.
• Do not sit or stand on the open door.
• Dishwasher detergents are dangerous. Obey the safety
instructions on the detergent packaging.
• Do not drink and play with the water in the appliance.
• Do not remove the dishes from the appliance until the
programme is completed. There can be detergent on
the dishes.
Warning! Risk of electrical shock, fire or burns.
• Do not put flammable products or items that are wet
with flammable products in, near or on the appliance.
• Do not use water spray and steam to clean the appli-
ance.
• The appliance can release hot steam if you open the
door while a programme operates.
Disposal
Warning! Risk of injury or suffocation.
• Disconnect the appliance from the mains supply.
• Cut off the mains cable and dispose of it.
• Remove the door catch to prevent children and pets to
get closed in the appliance.
Customer Care and Service
Contact the Service to repair the appliance. We recom-
mend only the use of original spare parts.
When you contact the Service, ensure that you have the
following information that is available on the rating plate.
Model : ..............................................................
PNC : ................................................................
Serial Number : ................................................
Product description
2
1
2
3
4
9
8
6
7
5
1 Lower spray arm
2 Filters
3 Rating plate
4 Rinse aid dispenser
5 Detergent dispenser
6 Salt container
7 Water hardness dial
8 Upper spray arm
9 Upper basket
1
15
Page: 15
D
o
w
n
l
o
a
d
e
d
f
r
o
m
w
w
w
.
v
a
n
d
e
n
b
o
r
r
e
.
b
e
D
o
w
n
l
o
a
d
e
d
f
r
o
m
w
w
w
.
v
a
n
d
e
n
b
o
r
r
e
.
b
e
Control panel
1 2 3
5
6 4
1 On/off indicator
2 Programme marker
3 Indicators
4 Delay button
5 Start button
6 Programme knob
I
Indicators Description
Washing phase indicator.
Drying phase indicator.
End indicator.
Salt indicator. This indicator is off while the programme operates.
Programmes
Programme1) Degree of soil
Type of load
Programme phases Duration
(min)
Energy
(kWh)
Water
(l)
Heavy soil
Crockery, cutlery,
pots and pans
Prewash
Wash 70 °C
Rinses
Dry
85-95 1,8-2,0 22-25
Normal soil
Crockery and cutlery
Prewash
Wash 65 °C
Rinses
Dry
100-110 1,4-1,6 19-21
2) Fresh soil
Crockery and cutlery
Wash 65 °C
Rinse
30 0,9 9
3)
Normal soil
Crockery and cutlery
Prewash
Wash 50 °C
Rinses
Dry
130-140 1,0-1,2 14-16
16
Page: 16
D
o
w
n
l
o
a
d
e
d
f
r
o
m
w
w
w
.
v
a
n
d
e
n
b
o
r
r
e
.
b
e
D
o
w
n
l
o
a
d
e
d
f
r
o
m
w
w
w
.
v
a
n
d
e
n
b
o
r
r
e
.
b
e
Programme1) Degree of soil
Type of load
Programme phases Duration
(min)
Energy
(kWh)
Water
(l)
4)
All Prewash 12 0,1 5
1) The water pressure and temperature, the variations of the mains supply, the options and the quantity of dishes can change the
programme duration and the consumption values.
2) With this programme you can wash a load with fresh soil. It gives good washing results in a short time.
3) This is the standard programme for test institutes. With this programme you have the most efficient use of water and energy
consumption for crockery and cutlery with normal soil. Refer to the supplied leaflet for test information.
4) Use this programme to quickly rinse the dishes. This prevents the remaining food to bond on the dishes and bad odours to come out
from the appliance.
Do not use detergent with this programme.
Before first use
1. Make sure that the set level of the water softener
agrees with the water hardness in your area. If not,
adjust the water softener. Contact your local water au-
thority to know the water hardness in your area.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Processing residues can stay in the appliance. Start a
programme to remove them. Do not use detergent
and do not load the baskets.
Adjusting the water softener
Hard water contains a high quantity of minerals that can
cause damage to the appliance and bad washing results.
The water softener neutralises these minerals.
The dishwasher salt keeps the water softener clean and in
good conditions. Refer to the table to adjust the water
softener to the right level. It makes sure that the water
softener uses the correct quantity of dishwasher salt and
water.
You must adjust the water softener manually and
electronically.
Water hardness
Water softener
adjustment
German
degrees
(°dH)
French
degrees
(°fH)
mmol/l Clarke
degrees
Manual Electronic
51 - 70 91 - 125 9.1 - 12.5 64 - 88 2 1) 10
43 - 50 76 - 90 7.6 - 9.0 53 - 63 2 1) 9
37 - 42 65 - 75 6.5 - 7.5 46 - 52 21) 8
29 - 36 51 - 64 5.1 - 6.4 36 - 45 21) 7
23 - 28 40 - 50 4.0 - 5.0 28 - 35 21) 6
19 - 22 33 - 39 3.3 - 3.9 23 - 27 21) 51)
17
Page: 17
D
o
w
n
l
o
a
d
e
d
f
r
o
m
w
w
w
.
v
a
n
d
e
n
b
o
r
r
e
.
b
e
D
o
w
n
l
o
a
d
e
d
f
r
o
m
w
w
w
.
v
a
n
d
e
n
b
o
r
r
e
.
b
e
Water hardness
Water softener
adjustment
German
degrees
(°dH)
French
degrees
(°fH)
mmol/l Clarke
degrees
Manual Electronic
15 - 18 26 - 32 2.6 - 3.2 18 - 22 1 4
11 - 14 19 - 25 1.9 - 2.5 13 - 17 1 3
4 - 10 7 - 18 0.7 - 1.8 5 - 12 1 2
< 4 < 7 < 0.7 < 5 12) 12)
1) Factory position.
2) Do not use salt at this level.
Manual adjustment
1 2
Turn the water hardness
dial to the position 1 or 2.
E
Electronic adjustment
1. Make sure that the programme marker on the pro-
gramme knob is aligned with the on/off indicator.
2. Press and hold the start button. At the same time turn
the programme knob clockwise until the programme
marker is aligned with the first programme on the
control panel.
3. Release the start button when the start indicator and
the on/off indicator start to flash.
• The end indicator flashes intermittently. The num-
ber of flashes shows the level of the water softener.
Example: 5 flashes + pause + 5 flashes = level 5.
4. To adjust the level of the water softener, press the
start button. Each time you press the start button you
go to the next level.
5. To confirm the setting, turn the programme knob until
the programme marker is aligned with the on/off indi-
cator.
Filling the salt container
Caution! Only use dishwasher salt. Other products
can cause damage to the appliance.
Water and salt can come out from the salt container when
you fill it. Risk of corrosion. To prevent it, after you fill the
salt container, start a programme.
1 2
3
Put 1 litre of water in the
salt container (only for the
first time).
4
1
18
Page: 18
D
o
w
n
l
o
a
d
e
d
f
r
o
m
w
w
w
.
v
a
n
d
e
n
b
o
r
r
e
.
b
e
D
o
w
n
l
o
a
d
e
d
f
r
o
m
w
w
w
.
v
a
n
d
e
n
b
o
r
r
e
.
b
e
5 6
F
Filling the rinse aid dispenser
Caution! Only use rinse aid for dishwashers. Other
products can cause damage to the appliance.
The rinse aid, during the last rinsing phase, helps to
dry the dishes without streaks and stains.
1 2
max
M A X
1
2 3
4
+
3 4
max
M A X
1
2 3
4
+
A
Fill the rinse aid dispenser
when the lens (A
A) is clear.
M A X
1
2 3
4
+
To adjust the released
quantity of rinse aid, turn
the selector between posi-
tion 1 (lowest quantity)
and position 4 (highest
quantity).
D
Daily use
1. Open the water tap.
2. Turn the programme knob until the programme mark-
er is aligned with the programme you want to set.
Make sure that the appliance is in setting mode. Refer
to ’SETTING AND STARTING A PROGRAMME’. Set
the correct programme for the type of load and the
degree of soil.
• If the salt indicator is on, fill the salt container.
• If the rinse aid indicator is on, fill the rinse aid dis-
penser.
3. Load the baskets.
4. Add the detergent.
5. Start the programme.
Loading the baskets
Refer to the supplied leaflet with examples of the
load of the baskets.
• Only use the appliance to wash items that are dish-
washer-safe.
• Do not put in the appliance items made of wood, horn,
aluminium, pewter and copper.
• Do not put in the appliance items that can absorb water
(sponges, household cloths).
• Remove remaining food from the items.
• Make soft the remaining burned food on the items.
• Put hollow items (cups, glasses and pans) with the
opening down.
• Make sure that cutlery and dishes do not bond togeth-
er. Mix spoons with other cutlery.
• Make sure that glasses do not touch other glasses.
• Put small items in the cutlery basket.
• Put light items in the upper basket. Make sure that the
items do not move.
19
Page: 19
D
o
w
n
l
o
a
d
e
d
f
r
o
m
w
w
w
.
v
a
n
d
e
n
b
o
r
r
e
.
b
e
D
o
w
n
l
o
a
d
e
d
f
r
o
m
w
w
w
.
v
a
n
d
e
n
b
o
r
r
e
.
b
e
• Make sure that the spray arms can move freely before
you start a programme.
Using the detergent
Caution! Use only detergents for dishwashers.
Do not use more than the correct quantity of deter-
gent. Refer to the instructions on the detergent
packaging.
1 2
A
3
Put the detergent or the
tablet in compartment (A
A).
A
B
If the programme has a
prewash phase, put a
small quantity of detergent
in compartment (B
B).
4
Detergent tablets do not fully dissolve with short
programmes and detergent residues can stay on the
dishes.
We recommend that you use detergent tablets with long
programmes.
C
Combi detergent tablets
These tablets contain detergent, rinse aid and other added
agents. Be sure that these tablets are applicable to the wa-
ter hardness in your area. Refer to the instructions on the
packaging of the products.
When you use tablets, that contain salt and rinse aid, do
not fill the salt container and the rinse aid dispenser. The
rinse aid indicator always comes on if the rinse aid dis-
penser is empty.
1. Adjust the water softener to the lowest level.
2. Set the rinse aid dispenser to the lowest position.
If you stop to use the combi detergent tablets, before you
start to use separately detergent, rinse aid and dishwasher
salt, do these steps:
1. Press the on/off button to activate the appliance.
2. Set the water softener to the highest level.
3. Make sure that the salt container and the rinse aid
dispenser are full.
4. Start the shortest programme with a rinsing phase,
without detergent and without dishes.
5. Adjust the water softener to the water hardness in
your area.
6. Adjust the released quantity of rinse aid.
Setting and starting a programme
Setting mode
The appliance must be in setting mode to start a
programme.
• Turn the programme knob until the programme marker
is aligned with a programme on the control panel. If the
on/off indicator comes on and the phase indicators for
the programme start to flash, the appliance is in setting
mode.
• Turn the programme knob until the programme marker
is aligned with a programme on the control panel. If the
on/off indicator and the start indicator come on and a
phase indicator is on with fixed light, the appliance is
not in setting mode.
To put the appliance in setting mode, press and hold the
start button until the start indicator goes off and the phase
indicators for the programme start to flash.
Starting a programme without delay start
1. Open the water tap.
2. Close the appliance door.
20
Page: 20
D
o
w
n
l
o
a
d
e
d
f
r
o
m
w
w
w
.
v
a
n
d
e
n
b
o
r
r
e
.
b
e
D
o
w
n
l
o
a
d
e
d
f
r
o
m
w
w
w
.
v
a
n
d
e
n
b
o
r
r
e
.
b
e
3. Turn the programme knob until the programme mark-
er is aligned with the programme you want to set.
• The on/off indicator comes on.
• The phase indicators of the set programme start to
flash.
4. Press the start button. The programme starts.
• The start indicator comes on.
• Only the indicator of the phase in operation stays
on.
Starting a programme with delay start
1. Set the programme.
2. Press the delay button to delay the start of the pro-
gramme of 3 hours. The delay indicator comes on.
3. Press the start button. The countdown starts.
• The start indicator comes on.
• The phase indicators of the set programme go off.
• When the countdown is completed, the programme
starts.
– The indicator of the phase in operation comes on.
Opening the door while the appliance operates
If you open the door, the appliance stops. When you close
the door, the appliance continues from the point of inter-
ruption.
Cancelling the delay start while the countdown operates
1. Press and hold the start button until the start indicator
and the delay indicator go off.
• The phase indicators of the set programme start to
flash.
2. Press the start button. The programme starts.
• The start indicator comes on.
• Only the indicator of the phase in operation stays
on.
Cancelling the programme
Press and hold the start button until the start indicator
goes off and the phase indicators for the programme start
to flash.
Make sure that there is detergent in the detergent
dispenser before you start a new programme.
At the end of the programme
When the programme is completed, the end indicator
comes on.
1. To deactivate the appliance, turn the programme knob
until the programme marker is aligned with the on/off
indicator.
2. Open the appliance door.
3. Close the water tap.
• For better drying results, keep the appliance door ajar
for some minutes.
• Let the dishes become cold before you remove them
from the appliance. Hot dishes can be easily damaged.
• First remove the items from the lower basket, then from
the upper basket.
There can be water on the sides and on the door of
the appliance. Stainless steel becomes cool more
quickly than the dishes.
Care and cleaning
Warning!
Before maintenance, deactivate the appliance and discon-
nect the mains plug from the mains socket.
Dirty filters and clogged spray arms decrease the
washing results.
Make a check regularly and, if necessary, clean them.
Cleaning the filters
1
C
B
A
2
2
21
Page: 21
D
o
w
n
l
o
a
d
e
d
f
r
o
m
w
w
w
.
v
a
n
d
e
n
b
o
r
r
e
.
b
e
D
o
w
n
l
o
a
d
e
d
f
r
o
m
w
w
w
.
v
a
n
d
e
n
b
o
r
r
e
.
b
e
3
To remove filters (B
B) and
(C
C), turn the handle coun-
terclockwise and remove.
Pull apart filter (B
B) and
(C
C). Wash the filters with
water.
A
4
Remove filter (A
A). Wash
the filter with water.
D
A
5
Put filter (A
A) to its initial
position. Make sure that it
assembles correctly under
the two guides (D
D).
6
Assemble filters (B
B) and
(C
C). Put them into position
in filter (A
A). Turn the han-
dle clockwise until it
locks.
An incorrect position of the filters can cause bad
washing results and damage to the appliance.
Cleaning the spray arms
Do not remove the spray arms.
If the holes in the spray arms are clogged, remove remain-
ing parts of soil with a thin pointed object.
External cleaning
Clean the appliance with a moist soft cloth.
Only use neutral detergents. Do not use abrasive prod-
ucts, abrasive cleaning pads or solvents.
Troubleshooting
The appliance does not start or it stops during operation.
First try to find a solution to the problem (refer to the ta-
ble). If not, contact the Service.
With some problems, some indicators flash continuously
and/or intermittently at the same time to show an alarm
code.
Alarm code Problem
• The start indicator flashes continuously.
• The end indicator flashes 1 time intermittently.
The appliance does not fill with water.
• The start indicator flashes continuously.
• The end indicator flashes 2 times intermittently.
The appliance does not drain the water.
• The start indicator flashes continuously.
• The end indicator flashes 3 times intermittently.
The anti-flood device is on.
22
Page: 22
D
o
w
n
l
o
a
d
e
d
f
r
o
m
w
w
w
.
v
a
n
d
e
n
b
o
r
r
e
.
b
e
D
o
w
n
l
o
a
d
e
d
f
r
o
m
w
w
w
.
v
a
n
d
e
n
b
o
r
r
e
.
b
e
Warning! Deactivate the appliance before you make
the checks. Turn the programme knob until the
programme marker is aligned with the on/off indicator.
Problem Possible cause Possible solution
The programme does not
start.
The mains plug is not connected in the
mains socket.
Connect the mains plug.
The appliance door is open. Close the appliance door.
You did not press the start button. Press the start button.
The fuse in the fuse box is damaged. Replace the fuse.
The delay start is set. Cancel the delay start or wait for the end
of the countdown.
The appliance does not fill
with water.
The water tap is closed. Open the water tap.
The water pressure is too low. Contact your local water authority.
The water tap is clogged or there is lime-
scale on it.
Clean the water tap.
The filter in the water inlet hose is clog-
ged.
Clean the filter.
The water inlet hose has a kink or a
bend.
Make sure that the position of the hose is
correct.
The anti-flood device is on. There are
water leakages in the appliance.
Close the water tap and contact the Serv-
ice.
The appliance does not drain
the water.
The sink spigot is clogged. Clean the sink spigot.
The water drain hose has a kink or a
bend.
Make sure that the position of the hose is
correct.
After the checks are completed, turn the programme knob
until the programme marker is aligned with programme
that was in operation when the problem occurred. The
programme continues from the point of interruption.
If the problem occurs again, contact the Service.
If other alarm codes show, contact the Service.
The washing results and drying results are not satisfactory
Problem Possible cause Possible solution
The dishes are not clean. The filters are clogged. Clean the filters.
The filters are not correctly assembled
and installed.
Make sure that the filters are correctly as-
sembled and installed.
The spray arms are clogged. Remove remaining soil with a thin pointed
object.
23
Page: 23
D
o
w
n
l
o
a
d
e
d
f
r
o
m
w
w
w
.
v
a
n
d
e
n
b
o
r
r
e
.
b
e
D
o
w
n
l
o
a
d
e
d
f
r
o
m
w
w
w
.
v
a
n
d
e
n
b
o
r
r
e
.
b
e
Problem Possible cause Possible solution
The programme was not applicable for
the type of load and soil.
Make sure that the programme is applica-
ble for the type of load and soil.
Incorrect position of the items in the
baskets. Water could not wash all items.
Make sure that the position of the items in
the baskets is correct and that the water
can easily wash all items.
The spray arms could not turn freely. Make sure that the position of the items in
the baskets is correct and does not cause
the blockage of the spray arms.
The quantity of detergent was not suffi-
cient.
Make sure that you add the correct quan-
tity of detergent in the dispenser before
you start a programme.
There was no detergent in the detergent
dispenser.
Make sure that you add detergent in the
dispenser before you start a programme.
Limescale particles on the
dishes.
The salt container is empty. Make sure that there is dishwasher salt in
the salt container.
The set level of the water softener is in-
correct.
Make sure that the set level of the water
softener agrees with the water hardness in
your area.
The cap of the salt container is loose. Tighten the cap.
Whitish streaks and stains or
bluish layers on glasses and
dishes.
The released quantity of rinse aid is too
much.
Decrease the released quantity of rinse
aid .
The quantity of detergent was too much. Make sure that you add the correct quan-
tity of detergent in the dispenser before
you start a programme.
Dry water drop stains on
glasses and dishes.
The released quantity of rinse aid was
not sufficient .
Increase the released quantity of rinse aid.
The quality of the detergent can be the
cause.
Try a different brand of detergent.
The dishes are wet. • The programme had no drying phase.
• The programme had a low tempera-
ture drying phase.
For better drying results, keep the door
ajar for some minutes.
The dishes are wet and matt. The rinse aid dispenser is empty. Make sure that there is rinse aid in the
rinse aid dispenser.
The quality of the rinse aid can be the
cause.
Try a different brand of rinse aid.
Technical information
Dimensions Width / Height / Depth (mm) 596 / 818-898 / 575
24
Page: 24
D
o
w
n
l
o
a
d
e
d
f
r
o
m
w
w
w
.
v
a
n
d
e
n
b
o
r
r
e
.
b
e
D
o
w
n
l
o
a
d
e
d
f
r
o
m
w
w
w
.
v
a
n
d
e
n
b
o
r
r
e
.
b
e
Electrical connection Refer to the rating plate.
Voltage 220-240 V
Frequency 50 Hz
Water supply pressure Min. / max. (bar / MPa) (0.5 / 0.05 ) / (8 / 0.8 )
Water supply 1) Cold water or hot water2) max. 60 °C
Capacity Place settings 12
1) Connect the water inlet hose to a water tap with a 3/4'' thread.
2) If the hot water comes from alternative sources of energy, (e.g. solar panels, aeolian energy), use the hot water supply to decrease
energy consumption.
Environment concerns
The symbol on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it should be taken to the
appropriate collection point for the recycling of electrical
and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential
negative consequences for the environment and human
health, which could otherwise be caused by inappropriate
waste handling of this product. For more detailed
information about recycling of this product, please contact
your local council, your household waste disposal service
or the shop where you purchased the product.
• Discard correctly the packaging material. Recycle the
materials with the symbol .
25

Question & answers

There are no questions about the Zanussi ZDI12001XA yet.

Ask a question about the Zanussi ZDI12001XA

Have a question about the Zanussi ZDI12001XA but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Zanussi ZDI12001XA. Please make sure that you describe your difficulty with the Zanussi ZDI12001XA as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.