Zanussi ZDF3020 manual

View a manual of the Zanussi ZDF3020 below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Zanussi
  • Product: Dishwasher
  • Model/name: ZDF3020
  • Filetype: PDF
  • Available languages: Dutch, English, German, French

Table of Contents

Page: 51
Contents
Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 52
Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 53
Washing programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ 55
Use of the appliance _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 56
Setting the water softener _ _ _ _ _ _ _ _ _ _ _ _ 56
Use of dishwasher salt _ _ _ _ _ _ _ _ _ _ _ _ _ _ 57
Use of rinse aid _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 58
Loading cutlery and dishes _ _ _ _ _ _ _ _ _ _ _ _ 58
Use of detergent _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 60
Multitab function _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 60
Select and start a washing programme _ _ _ _ _ _ 61
Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 62
What to do if… _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 63
Technical data _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 65
Environment concerns _ _ _ _ _ _ _ _ _ _ _ _ _ _ 65
Installation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 65
Water connection _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 66
Electrical connection _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 67
Subject to change without notice
Safety information
For your safety and correct operation of the appli-
ance, read this manual carefully before installation
and use. Always keep these instructions with the appli-
ance even if you move or sell it. Users must fully know
the operation and safety features of the appliance.
Correct use
• The appliance is designed exclusively for domestic
use.
• Onlyusetheappliancetocleanhouseholdutensilsthat
are applicable for dishwashers.
• Do notputsolvents intheappliance.Riskofexplosion.
• Put the knives and all items with sharp points in the
cutlery basket with their points down. If not, put in a
horizontal position in the upper basket.
• Useonlybrandedproductsfordishwashers(detergent,
salt, rinse aid).
• Ifyouopenthedoorwhiletheapplianceisinoperation,
hot steam can escape. Risk of skin burns.
• Do not remove dishes from the dishwasher before the
end of the washing programme.
• When the washing programme is completed, discon-
nect the mains plug from the mains socket and close
the water tap.
• Only an authorised service engineer can repair this
appliance. Use only original spare parts.
• Do not do repairs yourself to prevent injury and dam-
age to the appliance. Always contact your local Service
Force Centre.
General safety
• Persons (including children) with reduced physical
sensory, mental capabilities or lack of experience and
knowledgemustnotusetheappliance.Theymusthave
supervision or instruction for the operation of the ap-
pliance by a person responsible for their safety.
• Obey the safety instructions from the manufacturer of
the dishwasher detergent to prevent burns to eyes,
mouth and throat.
• Do not drink the water from the dishwasher. Detergent
residues can stay in your appliance.
• Always close the door when you do not use the appli-
ance to prevent injury and notto stumble over the open
door.
• Do not sit or stand on the open door.
Child safety
• Only adults can use this appliance. Children must get
supervision to make sure that they do not play with the
appliance.
• Keep all the packaging away from children. There is a
risk of suffocation.
• Keep all detergents in a safe area. Do not let children
touch the detergents.
• Keep children away from the appliance when the door
is open.
Installation
• Make sure that the appliance is not damaged because
of transport. Do not connect a damaged appliance. If
necessary, contact the supplier.
• Remove all packaging before first use.
• A qualified and competent person must do the electri-
cal installation.
• A qualified and competent person must do the plumb-
ing installation.
52
Page: 52
• Do not change the specifications or modify this prod-
uct. Risk of injury and damage to the appliance.
• Do not use the appliance:
– if the mains cable or water hoses are damaged,
– if the control panel, worktop or plinth area are dam-
aged, that you can get access to the inner side of
the appliance.
Contact your local Service Force Centre.
• Do not drill into the sides of the appliance to prevent
damage to hydraulic and electrical components.
Warning! Carefully obey the instructions for
electrical and water connections.
Control panel
7
8
1 2 3 4
5
6
1 Programme knob
2 Start/cancel button (Start/Cancel)
3 Multitab button (Multi Tab)
4 Delay start button (Delay)
5 Digital display
6 Indicator lights
7 Programme marker
8 Off position
Indicator lights
Wash phase Comes on when the washing phase or the rinsing phase operates.
Dry phase Comes on when the drying phase operates.
Multitab Comes on when you activate the multitab function Refer to 'Multitab function'.
Salt 1) Comes on when it is necessary to fill the salt container. Refer to 'Use of dishwasher
salt'.
After you fill the container, the salt indicator light can continue to stay on for some
hours. This does not have an unwanted effect on the operation of the appliance.
53
Page: 53
Indicator lights
Rinse aid 1) Comes on when it is necessary to fill the rinse aid container. Refer to 'Use of rinse aid'.
1) When the salt and/or rinse aid containers are empty, the related indicator lights do not come on while a washing programme
operates.
Programme knob
• To switch on the appliance or to set a washing pro-
gramme, turn the programme knob clockwise or coun-
terclockwise. The programme marker on the pro-
gramme knob must agree with one of the washing pro-
grammes on the controlpanel. Iftheprogramme mark-
er agrees with a washing programme, the digital dis-
play shows the time duration of the programme. If the
programme marker does not agree with a washing
programme, the digital display shows two horizontal
bars.
• To switch off the appliance, turn the programme knob
until the programme marker agrees with the off indi-
cator.
Use the programme knob for these operations:
– To set the water softener. Refer to 'Setting the water
softener'.
– To deactivate/activate the rinse aid dispenser. Refer to
'Multitab function'.
Start/cancel button
Use the start/cancel button for these operations:
• To start the washing programme. Refer to the chapter
'Setting and starting a washing programme'.
• To cancel a washing programme in progress. Refer to
the chapter 'Setting and starting a washing pro-
gramme'.
• To set the water softener level. Refer to the chapter 'Set
the water softener'.
• To deactivate/activate the rinse aid dispenser. Refer to
the chapter 'Multitab function'.
Multitab button
Press this button to activate/deactivate the multitab func-
tion. Refer to the chapter 'Multitab function'.
Delay start button
Use the delay start button to delay the start of the washing
programmewithanintervalbetween1and19hours.Refer
to the chapter 'Setting and starting a washing pro-
gramme'.
Digital display
The display shows:
• Adjusted level of the water softener.
• Activation/deactivation of the rinse aid dispenser(only
with multitab function on).
• Programme duration.
• Remaining time to the end of the programme.
• Endofawashingprogramme,thedigitaldisplayshows
a zero.
• Number of hours in delay start.
• Fault codes.
Setting mode
The appliance is in setting mode when:
• One or more phase indicator lights are on.
• The time duration of the programme flashes in the
digital display.
The appliance must be in setting mode for these opera-
tions:
– To set a washing programme.
– To set the water softener level.
– To deactivate/activate the rinse aid dispenser.
The appliance is not in setting mode when:
• One or more phase indicator lights are on.
• The time duration of the programme does not flash.
In this condition cancel the programme to go back to the
setting mode. Refer to the chapter 'Setting and starting a
washing programme'.
54
Page: 54
Washing programmes
Washing programmes
Programme and
programme knob
position
Degree of soil Type of load Programme description
1) Any Crockery, cutlery, pots
and pans
Prewash
Main wash up to 45°C or 70°C
1 or 2 intermediate rinses
Final rinse
Drying
Heavy soil Crockery, cutlery, pots
and pans
Prewash
Main wash up to 70°C
2 intermediate rinses
Final rinse
Drying
2) Normal soil Crockery and cutlery Prewash
Main wash up to 50°C
1 intermediate rinse
Final rinse
Drying
Any Partial load (to be com-
pleted later in the day).
1 cold rinse (to prevent food scraps to
bond).
Detergent is not necessary with this
programme.
3) Normal or light soil Crockery and cutlery Main wash up to 65°C
Final rinse
1) During the Auto programme, the soil level of the dishes is given by how cloudy the water is. The programme duration and
consumptions can change. This depends if the appliance is fully or not and on the level of soil on the dishes. The appliance adjusts
automatically the temperature of the water during the main wash.
2) Test programme for test institutes. Please refer to separate leaflet supplied, for test data.
3) This is the perfect daily programme to clean a not fully load. Ideal for a family of 4 persons who only want to load breakfast and
dinner crockery and cutlery.
Consumption values
Programme Duration (in minutes) 1) Energy (in kWh) Water (in litres)
- 1,1-1,7 11-22
- 1,6-1,8 22-24
- 1,0-1,1 13-15
- 0,1 4
- 0,9 9
1) The digital display shows the programme duration.
55
Page: 55
The pressure and temperature of the water, the var-
iations of power supply and the quantity of dishes
can change these values.
Use of the appliance
Refer to the following instructions for each step of pro-
cedure:
1. Make a check if the water softener level is correct for
the water hardness in your area. If necessary set the
water softener.
2. Fill the salt container with dishwasher salt.
3. Fill the rinse aid dispenser with rinse aid.
4. Load cutlery and dishes into the dishwasher.
5. Set the correct washing programme for the type of
load and soil.
6. Fill the detergent dispenser with the correct quantity
of detergent.
7. Start the washing programme.
If you use combi detergent tablets ('3 in 1', '4 in 1',
'5 in 1', etc.), refer to the chapter 'Multitab function'.
Setting the water softener
The water softener removes minerals and salts from the
water supply. Minerals and salts can have bad effect on
the operation of the appliance.
Water hardness is measured in equivalent scales:
• German degrees (dH°).
• French degrees (°TH).
• mmol/l (millimol per litre - international unit for the
hardness of water).
• Clarke.
Adjust the water softener to the water hardness in your
area. If necessary, contact your local water authority.
Water hardness Water hardness setting
°dH °TH mmol/l Clarke manually electronically
51 - 70 91 - 125 9,1 - 12,5 64 - 88 2 10
43 - 50 76 - 90 7,6 - 9,0 53 - 63 2 9
37 - 42 65 - 75 6,5 - 7,5 46 - 52 2 8
29 - 36 51 - 64 5,1 - 6,4 36 - 45 2 7
23 - 28 40 - 50 4,0 - 5,0 28 - 35 2 6
19 - 22 33 - 39 3,3 - 3,9 23 - 27 2 5
15 - 18 26 - 32 2,6 - 3,2 18 - 22 1 4
11 - 14 19 - 25 1,9 - 2,5 13 - 17 1 3
4 - 10 7 - 18 0,7 - 1,8 5 - 12 1 2
< 4 < 7 < 0,7 < 5 11) 11)
1) No use of salt required.
You must set the water softener manually and elec-
tronically.
Manual adjustment
The appliance is set at the factory at position 2.
56
Page: 56
1 2
Set switch to position 1 or
2.
Electronic adjustment
The water softener is set at the factory at level 5.
The appliance must be switched off.
1. Press and hold the start/cancel button. Turn the pro-
gramme knob counterclockwise until the programme
marker agrees with the first washing programme on
the control panel.
2. Release the start/cancel button when the digital dis-
play shows the current setting.
Examples:
– level 5 =
– level 10 =
3. Press the start/cancel button to change the water
softener level. Every time you press the button, the
level increases.
4. Turn the programme knob to the off position to save
the operation.
Use of dishwasher salt
Caution! Only use dishwashers salt. Types of salt
that are not applicable for dishwashers cause
damage to the water softener.
1 2
3
Fill the salt container with
1 litre of water (only the
first operation).
4
5 6
It is normal that water overflows from the salt con-
tainer when you fill it with salt.
Make sure that there is no grain of salt outer of the
salt compartment. Salt which stays on the tank for
a while drills the tank. It is recommended to start a wash-
ing programme immediately after you fill the salt con-
tainer. This prevents of corrosion because of spilled salt.
When you set electronically the water softener to level 1,
the salt indicator light does not stay on.
57
Page: 57
Use of rinse aid
Caution! Only use branded rinse aid for
dishwashers.
Do these steps to fill the rinse aid dispenser:
1 2
M
A X
1
2 3
4
+
3 4
Caution! Do not fill the rinse aid dispenser with
other products (e.g. dishwasher cleaning agent,
liquid detergent). There is a risk of damage to the ap-
pliance.
Adjusting the dosage of rinse aid
M
A X
1
2 3
4
+
The rinse aid dial is set at
the factory at position 3.
To increase or decrease
the dosage refer to 'What
to do if...'
Loading cutlery and dishes
Helpful hints and tips
Caution! Only use the appliance for household
utensils that are applicable for dishwashers.
Do not use the appliance to clean objects that can absorb
water (sponges, household cloths, etc.).
• Before you load cutlery and dishes, do these steps:
– Remove all food remainings and debris.
– Make burnt, remaining food in pans soft.
• While you load cutlery and dishes, do these steps:
– Load hollow items (e.g. cups, glasses and pans)
with the opening down.
– Make sure that water does not collect in the con-
tainer or in a deep base.
– Make sure that cutlery and dishes do not lie inside
one another.
– Makesurethatcutleryanddishesdonotcoverother
cutlery and dishes.
– Make sure that glasses do not touch other glasses.
– Put small objects in the cutlery basket.
• Plastic items and pans with non-stick coatings can
keep water droplets. Plastic items do not dry as well
as porcelain and steel items.
• Put light items in the upper basket. Make sure that the
items do not move.
Caution! Make sure that the spray arms can move
freely before you start a washing programme.
Warning! Always close the door after you load or
unload the appliance. An open door can be
dangerous.
58
Page: 58
1
Arrange service dishes
and large lids around the
edge of the lower basket.
2
3
The rows of prongs in the
lower basket can be flat to
loadpots,pansandbowls.
1 2
Use the cutlery grid. If the dimensions of the cutlery
prevent use of the cutlery grid, remove it.
1
Arrange the items to let
water touch all surfaces.
2
For longer items fold the
cup racks up.
Prevent to put plates in the first three sections in the
front part of the upper basket. Make sure the plates
tilt forward.
Adjustment of the height of the upper basket
If you put large plates in the lower basket, first move the
upper basket to the upper position.
Maximum height of the dishes
upper basket lower basket
Upper position 20 cm 31 cm
Lower position 24 cm 27 cm
Do these steps to move the upper basket to the upper
position:
1. Pull the basket out until it stops.
2. Carefully lift the two sides until the mechanism is
engaged and the basket is stable.
1
Do these steps to move the upper basket to the lower
position:
1. Pull the basket out until it stops.
2. Carefully lift the two sides upwards.
3. Hold the mechanism and let it fall back down slowly.
59
Page: 59
Caution!
• Do not lift or lower the basket on one side only.
• If the basket is in the upper position, do not put cups
on the cup racks.
Use of detergent
Only use detergents (powder, liquid or tablet) that
are applicable for dishwashers.
Follow the data on the packaging:
• Dosage recommended by the manufacturer.
• Storage recommendations.
Do not use more than the correct quantity of deter-
gent to save an environment.
1 2
3
Fill the detergent dispens-
er (A) with detergent.
4
If you use a washing pro-
gramme with prewash
phase, put more detergent
in the prewash detergent
compartment (B).
5 6
Different brands of detergent dissolve in different
times. Some detergent tablets do not have the best
cleaning results during short washing programmes. Use
long washing programmes when you use detergent tab-
lets to fully remove the detergent.
Multitab function
The multitab function is for combi detergent tablets.
These tablets contain agents such as detergent, rinse aid
and dishwasher salt. Some types of tablets can contain
other agents.
Doacheckifthesetabletsareapplicableforthelocalwater
hardness.Refer tothe instructions fromthemanufacturer.
When you set the multitab function, it stays on until you
deactivate it.
The multitabfunctionstops automaticallytheflowofrinse
aid andsalt. The rinse aid indicator lightandsaltindicator
light are deactivated.
The programme duration can increase if you use the mul-
titab function.
60
Page: 60
Activate or deactivate the multitab function before
the start of a washing programme.
You cannot activate or deactivate the multitab function
when the programme operates. Cancel the washing pro-
gramme, then set the programme again.
To activate the multitab function:
• Press the multitab button. The multitab indicator light
comes on.
To deactivate the multitab function:
• Press the multitab button. The multitab indicator light
goes off.
Do these steps if the drying results are not satis-
factory:
1. Fill the rinse aid dispenser with rinse aid.
2. Activate the rinse aid dispenser.
3. Set the rinse aid dosage to position 2.
• You can only activate or deactivate the rinse aid dis-
penser when the multitab function is activated.
To activate/deactivate the rinse aid dispenser:
The appliance must be switched off.
1. Press and hold the start/cancel button. Turn the pro-
gramme knob counterclockwise until the programme
marker agrees with the first washing programme on
the control panel.
2. Release the start/cancel button when the display
shows the water hardness level.
3. Turn the programme knob counterclockwise until the
programme marker agrees with the second washing
programme on the control panel.
4. The digital display shows the current setting for the
rinse aid dispenser.
Rinse aid dispenser deac-
tivated
Rinse aiddispenseractiva-
ted
5. Press the start/cancel button to change the setting.
The digital display shows the new setting.
6. Turn the programme knob to the off position to save
the operation.
To use normal detergent again:
1. Deactivate the multitab function.
2. Fill the salt container and rinse aid dispenser.
3. Adjust the water hardness setting to the highest level.
4. Do a washing programme without dishes.
5. Adjustthewatersoftenertothewaterhardnessinyour
area.
6. Adjust the rinse aid dosage.
Select and start a washing programme
Do these steps to set and start a washing programme:
1. Close the door.
2. Turn the programme knob to set the washing pro-
gramme.Refertothechapter'Washingprogrammes'.
– The phase indicator light or lights for the washing
programme come on.
– The programme duration in the digital display
flashes.
3. Press the start/cancel button.
– The washing programme starts automatically.
– When the programme starts, only the indicator
lightofthephaseinprogressstayson.Programme
duration is on with a static light.
Whenthewashingprogrammeoperates,youcannot
change the programme. Cancel the washing pro-
gramme.
Warning! Only interrupt or cancel a washing
programme if necessary.
Caution! Open the door carefully. Hot steam can
come free.
Interrupting a washing programme
Open the door.
• The programme stops.
Close the door.
• The programme continues from the point of interrup-
tion.
61
Page: 61
Cancelling a washing programme
• Press and hold the start/cancel button.
– In the digital display the time duration of the pro-
gramme flashes.
– One or more phase indicator lights are on.
The washing programme is cancelled.
At this time you can do these steps:
1. Switch off the appliance.
2. Set a new washing programme.
Fill the detergent dispenser with detergent before you
set a new washing programme.
Setting and starting a washing programme with
delay start
1. Set a washing programme.
2. Press the delay start button until the display shows
the necessary delay start time for the washing pro-
gramme. Delay start time flashes in the digital dis-
play.
3. Press the start/cancel button.
– The countdown of the delay start starts.
– The phase indicator lights of the washing pro-
gramme go off.
– In the digital display the delay start time is on with
a static light.
When the countdown is completed, the washing pro-
gramme automatically starts The phase indicator light of
the phase in progress comes on.
Do not open the door during the countdown to pre-
vent interruption of the countdown. When you close
the door again, the countdown continues from the point
of interruption.
Cancelling a delay start
1. Press and hold the start/cancel button.
– The phase indicator lights or light come on.
– In the digital display, the time duration of the
washing programme comes on.
2. Press the start/cancel button to start the washing
programme.
End of the washing programme
Switch off the appliance in these conditions:
• The appliance stops automatically.
• The digital display shows a zero.
• The phase indicator lights are off.
For better drying results, keep the door ajar for some mi-
nutes before you remove the dishes.
Let the dishes cool down before you remove them from
the appliance. Hot dishes are easily damaged.
Standby mode
If you do not switch off the appliance at the end of the
washing programme, the appliance automatically goes
into standby mode. The standby mode decreases energy
consumption.
Three minutes after the end of the programme, all indi-
cator lights go off and the digital display shows one hor-
izontal bar.
Pressabuttontogobacktotheend-of-programmemode.
Care and cleaning
Warning! Switch the appliance off before you clean
the filters.
Cleaning the filters
Important! Do not use the appliance without the filters.
Make sure that the installation of the filters is correct.
Incorrect installation will cause unsatisfactory washing
results and damage to the appliance.
1 2
Fully clean the filters A, B
and C below running wa-
ter.
62
Page: 62
3
To remove filters B and C,
turn the handle approxi-
mately 1/4 anticlockwise.
4
Remove the flat filter A
from the bottom of the ap-
pliance.
5
Put the flat filter A in the
bottom of the appliance.
Install the flat filter cor-
rectly under the two
guides D.
6
Put the filter system in po-
sition. To lock the filter
system, turn the handle
clockwise until it locks in
position.
Important! Do not remove the spray arms.
If the holes in the spray arms become clogged, remove
remaining parts of soil with a cocktail stick.
External cleaning
Clean the external surfaces of the appliance and control
panel with a damp soft cloth. Only use neutral detergents.
Do not use abrasive products, scouring pads or solvents
(acetone, trichloroethylene etc...).
Frost precautions
Caution! Do not install the appliance where the
temperature is below 0 °C. The manufacturer is not
responsible for damage because of frost.
If not possible, empty the appliance and close the door.
Disconnect the water inlet hose and remove water from
the water inlet hose.
What to do if…
The appliance does not start or stops during operation.
If there is a fault, first try to find a solution to the problem
yourself. If you cannot find a solution to the problem
yourself, contact the Service Force Centre.
Caution! Switch off the appliance before you do the
below suggested corrective actions.
Fault code and malfunction Possible cause and solution
• the digital display shows
The dishwasher does not fill with water
• The water tap is blocked or furred with limescale.
Clean the water tap.
• The water tap is closed.
Open the water tap.
• The filter in the water inlet hose is blocked.
Clean the filter.
• The connection of the water inlet hose is not correct. The hose can
be kinked or squashed.
Make sure that the connection is correct.
63
Page: 63
Fault code and malfunction Possible cause and solution
• the digital display shows
The dishwasher will not drain
• There is a blockage in the sink spigot.
Clean the sink spigot.
• The connection of the water drain hose is not correct. The hose can
be kinked or squashed.
Make sure that the connection is correct.
• the digital display shows
The anti-flood device operates
• Close the water tap and contact your local Service Force Centre.
The programme does not start • The appliance door is not closed.
Close the door.
• Mains plug is not connected in.
Put in the mains.
• The fuse has blown out in the household fuse box.
Replace the fuse.
• Delay start is set.
Cancel the delay start to start the programme immediately.
After the check, switch on the appliance. Set the knob on
the same washing programme as before the malfunction.
The programme continues from the point of interruption.
Ifthemalfunctionshowsagain,contactyourServiceForce
Centre.
If the display shows a fault code, not described in the
chart, contact your Service Force Centre.
These data are necessary to help you quickly and cor-
rectly:
• Model (Mod.)
• Product number (PNC)
• Serial number (S.N.)
For these data, refer to the rating plate.
Write the necessary data here:
Model description : ..........
Product number : ..........
Serial number : ..........
The cleaning results are not satisfactory
The dishes are not clean • The selected washing programme is not applicable for the type of load and
soil.
• The baskets are loaded incorrectly so that water cannot reach all surfaces.
• Spray arms do not turn freely because of incorrect arrangement of the load.
• The filters are dirty or not correctly installed.
• The quantity of detergent is too little or missing.
Limescalesparticlesonthedishes • The salt container is empty.
• The water softener is adjusted on a wrong level.
• The salt container cap is not closed correctly.
The dishes are wet and dull • No rinse aid has been used.
• The rinse aid dispenser is empty.
There are streaks, milky spots or
a bluish coating on glasses and
dishes
• Decrease the rinse aid dosage.
64
Page: 64
The cleaning results are not satisfactory
Dry water drop signs on glasses
and dishes
• Increase rinse aid dosage.
• The detergent can be the cause.
Technical data
Dimensions Width cm 60
Height cm 85
Depth cm 61
Electrical connection - Voltage -
Overall power - Fuse
Information on the electrical connection is given on the rating plate on the
inner edge of the dishwasher door.
Water supply pressure Minimum 0,5 bar (0,05 MPa)
Maximum 8 bar (0,8 MPa)
Capacity Place settings 12
Environment concerns
The symbol on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it should be taken to the
appropriate collection point for the recycling of electrical
and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential
negative consequences for the environment and human
health, which could otherwise be caused by inappropriate
waste handling of this product. For more detailed
information about recycling of this product, please
contactyourlocalcouncil,yourhouseholdwastedisposal
service or the shop where you purchased the product.
The packaging materials are environmentally friendly and
can be recycled. The plastic components are identified by
markings, e.g. >PE<, >PS<, etc. Discard the packaging
materials in the applicable container at the community
waste disposal facilities.
Warning! To discard the appliance, follow the
procedure:
• Pull the mains plug out of the socket.
• Cut off the mains cable and mains plug and discard
them.
• Discard the door catch. This prevents the children to
close themselves inside the appliance and endanger
their lives.
Installation
Warning! Make sure that mains plug is
disconnected from the mains socket during
installation.
Fitting under a counter
Puttheapplianceadjacenttoawatertapandawaterdrain.
Remove the appliance worktop to install it under a sink
unit or a kitchen worktop. Make sure that the dimensions
of the recess agree with the given dimensions.
65
Page: 65
1 2
3 4
Install the appliance worktop to the appliance if you want
to use the dishwasher as a freestanding appliance.
The plinth on freestanding appliance is not adjustable.
Adjusting the level of the appliance
Make sure that the appliance is level to close and seal the
door correctly. If the level of the appliance is correct, the
door does not catch on the sides of the cabinet. If the door
does not close correctly, loosen or tighten the adjustable
feet until the appliance is level.
Water connection
Water inlet hose
Connected the appliance to a hot (max. 60°) or cold water
supply.
If the hot water comes from alternative sources of energy
that are more environmentally friendly (e.g. solar or pho-
tovoltaic panels and aeolian), use a hot water supply to
decrease energy consumption.
Connect the inlet hose to a water tap with an external
thread of 3/4”.
Caution! Do not use connection hoses from an old
appliance.
The water pressure must be in the limits (refer to the
chapter 'Technical data'). Make sure that the local water
authority gives you the average mains pressure in your
area.
Make sure that there are no kinks in the water inlet hose
andthatthewater inlet hoseis notsquashed orentangled.
Turn the inlet hose to the left or the right to suit the in-
stallation. Fit the locknut correctly to prevent water leaks.
Caution! Do not connectthe appliance to new pipes
or pipes that are not used for a long time. Let the
water run for some minutes, then connect the inlet hose.
Drain hose
1
Connect the water drain
hose to the sink spigot.
max 85 cm
min 40 cm
max
400
cm
2
3 4
The internal diameter must not be smaller than the diam-
eter of the hose.
66
Page: 66
If you connect the water drain hose to a trap spigot under
the sink, remove the plastic membrane (A). If you do not
removethemembrane,remainingfoodcancauseablock-
age in the drain hose spigot.
Caution! Make sure that the water couplings are
tight to prevent water leakage.
Electrical connection
Warning! The manufacturer is not responsible if
you do not follow these safety precautions.
Ground the appliance according to safety precautions.
Make sure that the rated voltage and type of power on the
rating plate agree with the voltage and the power of the
local power supply.
Always use a correctly installed shockproof socket.
Do not use multi-way plugs, connectors and extension
cables. There is a risk of fire.
Do not replace the mains cable yourself. Contact the
Service Force Centre.
Make sure that the mains plug is accessible after
installation.
Do not pull the mains cable to disconnect the appliance.
Always pull the mains plug.
67

Question & answers

There are no questions about the Zanussi ZDF3020 yet.

Ask a question about the Zanussi ZDF3020

Have a question about the Zanussi ZDF3020 but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Zanussi ZDF3020. Please make sure that you describe your difficulty with the Zanussi ZDF3020 as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.