Zanussi ZDF1000 manual

View a manual of the Zanussi ZDF1000 below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Zanussi
  • Product: Dishwasher
  • Model/name: ZDF1000
  • Filetype: PDF
  • Available languages: Dutch, English, German, French, Spanish

Table of Contents

Page: 15
Contents
Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 16
Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 17
Washing programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ 18
Use of the appliance _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 19
Setting the water softener _ _ _ _ _ _ _ _ _ _ _ _ 19
Use of dishwasher salt _ _ _ _ _ _ _ _ _ _ _ _ _ _ 20
Use of rinse aid _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 21
Loading cutlery and dishes _ _ _ _ _ _ _ _ _ _ _ _ 21
Use of detergent _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 23
Setting and starting a washing programme _ _ _ _ 24
Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 24
What to do if… _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 25
Technical data _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 27
Environment concerns _ _ _ _ _ _ _ _ _ _ _ _ _ _ 27
Installation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 27
Water connection _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 28
Electrical connection _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 29
Subject to change without notice
Safety information
For your safety and correct operation of the appli-
ance, read this manual carefully before installation
and use. Always keep these instructions with the appli-
ance even if you move or sell it. Users must fully know
the operation and safety features of the appliance.
Correct use
• The appliance is designed exclusively for domestic
use.
• Onlyusetheappliancetocleanhouseholdutensilsthat
are applicable for dishwashers.
• Do notputsolvents intheappliance.Riskofexplosion.
• Put the knives and all items with sharp points in the
cutlery basket with their points down. If not, put in a
horizontal position in the upper basket.
• Useonlybrandedproductsfordishwashers(detergent,
salt, rinse aid).
• Ifyouopenthedoorwhiletheapplianceisinoperation,
hot steam can escape. Risk of skin burns.
• Do not remove dishes from the dishwasher before the
end of the washing programme.
• When the washing programme is completed, discon-
nect the mains plug from the mains socket and close
the water tap.
• Only an authorised service engineer can repair this
appliance. Use only original spare parts.
• Do not do repairs yourself to prevent injury and dam-
age to the appliance. Always contact your local Service
Force Centre.
General safety
• Persons (including children) with reduced physical
sensory, mental capabilities or lack of experience and
knowledgemustnotusetheappliance.Theymusthave
supervision or instruction for the operation of the ap-
pliance by a person responsible for their safety.
• Obey the safety instructions from the manufacturer of
the dishwasher detergent to prevent burns to eyes,
mouth and throat.
• Do not drink the water from the dishwasher. Detergent
residues can stay in your appliance.
• Always close the door when you do not use the appli-
ance to prevent injury and notto stumble over the open
door.
• Do not sit or stand on the open door.
Child safety
• Only adults can use this appliance. Children must get
supervision to make sure that they do not play with the
appliance.
• Keep all the packaging away from children. There is a
risk of suffocation.
• Keep all detergents in a safe area. Do not let children
touch the detergents.
• Keep children away from the appliance when the door
is open.
Installation
• Make sure that the appliance is not damaged because
of transport. Do not connect a damaged appliance. If
necessary, contact the supplier.
• Remove all packaging before first use.
• A qualified and competent person must do the electri-
cal installation.
• A qualified and competent person must do the plumb-
ing installation.
16
Page: 16
• Do not change the specifications or modify this prod-
uct. Risk of injury and damage to the appliance.
• Do not use the appliance:
– if the mains cable or water hoses are damaged,
– if the control panel, worktop or plinth area are dam-
aged, that you can get access to the inner side of
the appliance.
Contact your local Service Force Centre.
• Do not drill into the sides of the appliance to prevent
damage to hydraulic and electrical components.
Warning! Carefully obey the instructions for
electrical and water connections.
Control panel
3
4
1 2
1 Programme knob
2 Start/cancel button (Start/Cancel)
3 Indicator light
4 On/off indicator light
Indicator light
The indicator light comes on when the washing pro-
gramme is completed. Auxiliary functions:
• Level of the water softener.
• An alarm if the appliance has a malfunction.
Programme knob and on/off indicator light
• To set a washing programme, turn the programme
knob clockwise or anticlockwise. The programme
marker on the programme knob must agree with one
of the washing programmes on the control panel.
– The on/off indicator light comes on (position ON).
• To set the appliance to the off position, turn the pro-
gramme knob until the programme marker agrees with
the on/off indicator light.
– The on/off indicator light goes off (position OFF).
17
Page: 17
Washing programmes
Washing programmes
Programme Degree of soil Type of load Programme description
Heavy soil
Crockery, cutlery,
pots and pans
Prewash
Main wash up to 70°C
2 intermediate rinses
Final rinse
Drying
Normal soil
Crockery, cutlery,
pots and pans
Prewash
Main wash up to 65°C
2 intermediate rinses
Final rinse
Drying
1) Normal or light
soil
Crockery and cut-
lery
Main wash up to 65°C
Final rinse
2) Normal soil
Crockery and cut-
lery
Prewash
Main wash up to 50°C
1 intermediate rinse
Final rinse
Drying
Any
Partial load (to be
completed later in
the day)
1 cold rinse (to avoid food scraps from stick-
ing).
This programme does not require the use of
detergent).
1) This is the perfect daily programme to clean a not fully load. Ideal for a family of 4 persons who only want to load breakfast and
dinner crockery and cutlery.
2) Test programme for test institutes. Please refer to separate leaflet supplied, for test data.
Consumption values
Programme Programme duration
(in minutes)
Energy consumption
(in kWh)
Water consumption
(in litres)
85-95 1,8-2,0 22-25
105-115 1,5-1,7 23-25
30 0,9 9
130-140 1,0-1,2 14-16
12 0,1 5
The pressure and temperature of the water, the var-
iations of power supply and the quantity of dishes
can change these values.
18
Page: 18
Use of the appliance
Refer to the following instructions for each step of pro-
cedure:
1. Make a check if the water softener level is correct for
the water hardness in your area. If necessary set the
water softener.
2. Fill the salt container with dishwasher salt.
3. Fill the rinse aid dispenser with rinse aid.
4. Load cutlery and dishes into the dishwasher.
5. Set the correct washing programme for the type of
load and soil.
6. Fill the detergent dispenser with the correct quantity
of detergent.
7. Start the washing programme.
If you use detergent tablets, refer to the chapter 'Use
of detergent'.
Setting the water softener
The water softener removes minerals and salts from the
water supply. Minerals and salts can have bad effect on
the operation of the appliance.
Water hardness is measured in equivalent scales:
• German degrees (dH°).
• French degrees (°TH).
• mmol/l (millimol per litre - international unit for the
hardness of water).
• Clarke.
Adjust the water softener to the water hardness in your
area. If necessary, contact your local water authority.
Water hardness Water hardness setting
°dH °TH mmol/l Clarke manually electronically
51 - 70 91 - 125 9,1 - 12,5 64 - 88 2 10
43 - 50 76 - 90 7,6 - 9,0 53 - 63 2 9
37 - 42 65 - 75 6,5 - 7,5 46 - 52 2 8
29 - 36 51 - 64 5,1 - 6,4 36 - 45 2 7
23 - 28 40 - 50 4,0 - 5,0 28 - 35 2 6
19 - 22 33 - 39 3,3 - 3,9 23 - 27 2 5
15 - 18 26 - 32 2,6 - 3,2 18 - 22 1 4
11 - 14 19 - 25 1,9 - 2,5 13 - 17 1 3
4 - 10 7 - 18 0,7 - 1,8 5 - 12 1 2
< 4 < 7 < 0,7 < 5 11) 11)
1) No use of salt required.
You must set the water softener manually and elec-
tronically.
Manual adjustment
The appliance is set at the factory at position 2.
19
Page: 19
1 2
Set switch to position 1 or
2.
Electronic adjustment
The water softener is set at the factory at level 5.
1. Press and hold the start/cancel button. Turn the pro-
gramme knob clockwise until the programme marker
agrees with the first washing programme on the con-
trol panel.
2. Release the start/cancel button when the on/off indi-
cator light and the start/cancel indicator light start to
flash.
– At the same time, the end indicator light flashes to
show the level of the water softener.
Example:
5 flashes, pause, 5 flashes, pause, etc... = level 5
3. Press the start/cancel button one time to increase the
water softener level by one step.
The end indicator light shows the new level.
4. Turn the programme knob to the off position to save
the operation.
Use of dishwasher salt
Caution! Only use dishwashers salt. Types of salt
that are not applicable for dishwashers cause
damage to the water softener.
1 2
3
Fill the salt container with
1 litre of water (only the
first operation).
4
5 6
It is normal that water overflows from the salt con-
tainer when you fill it with salt.
Make sure that there is no grain of salt outer of the
salt compartment. Salt which stays on the tank for
a while drills the tank. It is recommended to start a wash-
ing programme immediately after you fill the salt con-
tainer. This prevents of corrosion because of spilled salt.
Important! Fill the salt container from time to time.
20
Page: 20
The salt cap has a refill indicator window in the center. A
green float is easy to see when there is a salt inside the
container.Italmostgoesoutofviewwhen thesaltisgone.
Use of rinse aid
Caution! Only use branded rinse aid for
dishwashers.
Do these steps to fill the rinse aid dispenser:
1 2
M
A X
1
2 3
4
+
3 4
M
A X
1
2 3
4
+
5
Fill when the rinse aid in-
dicator ( B ) becomes
clear.
Caution! Do not fill the rinse aid dispenser with
other products (e.g. dishwasher cleaning agent,
liquid detergent). This can cause damage to the appli-
ance.
Adjusting the dosage of rinse aid
M
A X
1
2 3
4
+
The rinse aid dial is set at
the factory at position 3.
To increase or decrease
the dosage refer to 'What
to do if...'
Loading cutlery and dishes
Helpful hints and tips
Caution! Only use the appliance for household
utensils that are applicable for dishwashers.
Do not use the appliance to clean objects that can absorb
water (sponges, household cloths, etc.).
• Before you load cutlery and dishes, do these steps:
– Remove all food remainings and debris.
– Make burnt, remaining food in pans soft.
21
Page: 21
• While you load cutlery and dishes, do these steps:
– Load hollow items (e.g. cups, glasses and pans)
with the opening down.
– Make sure that water does not collect in the con-
tainer or in a deep base.
– Make sure that cutlery and dishes do not lie inside
one another.
– Makesurethatcutleryanddishesdonotcoverother
cutlery and dishes.
– Make sure that glasses do not touch other glasses.
– Put small objects in the cutlery basket.
• Plastic items and pans with non-stick coatings can
keep water droplets. Plastic items do not dry as well
as porcelain and steel items.
• Put light items in the upper basket. Make sure that the
items do not move.
Caution! Make sure that the spray arms can move
freely before you start a washing programme.
Warning! Always close the door after you load or
unload the appliance. An open door can be
dangerous.
1
Arrange service dishes
and large lids around the
edge of the lower basket.
2
1 2
Use the cutlery grid. If the dimensions of the cutlery
prevent use of the cutlery grid, remove it.
1
Arrange the items to let
water touch all surfaces.
2
For longer items fold the
cup racks up.
Prevent to put plates in the first three sectors in the
front part of the basket. Make sure the plates tilt
forward.
Adjustment of the height of the upper basket
If you put large plates in the lower basket, first move the
upper basket to a upper position.
Warning! Adjust the height before you load the
upper basket.
Maximum height of the dishes in :
upper basket lower basket
Upper position 20 cm 31 cm
Lower position 24 cm 27 cm
1 2
Do these steps to move the upper basket to the upper or
lower position:
1. Move the front runner stops (A) out.
2. Pull the basket out.
3. Put the basket in the upper or lower position.
22
Page: 22
4. Replace the front runner stops (A) in their initial po-
sition.
Caution! If the basket is in the upper position, do
not put cups on the cup racks.
Use of detergent
Only use detergents (powder, liquid or tablet) that
are applicable for dishwashers.
Follow the data on the packaging:
• Dosage recommended by the manufacturer.
• Storage recommendations.
Do not use more than the correct quantity of deter-
gent to save an environment.
1 2
3
Fill the detergent dispens-
er (A) with detergent.
4
If you use a washing pro-
gramme with prewash
phase, put more detergent
in the prewash detergent
compartment (B).
5 6
Use of detergent tablets
Put the detergent tablet in the detergent dispenser (A).
Detergent tablets contain:
• detergent
• rinse aid
• other cleaning agents.
Do these steps to use detergent tablets:
1. Make sure thatthe detergenttablets are applicablefor
your water hardness. Refer to the instructions from
the manufacturer.
2. Set the lowest levels of water hardness and rinse aid
dosage.
It is not necessary to fill the salt container and the
rinse aid dispenser.
Do these steps when the drying results are not
satisfactory:
1. Fill the rinse aid dispenser with rinse aid.
2. Set the rinse aid dosage to position 2.
Do these steps to use the detergent powder again:
1. Fill the salt container and the rinse aid dispenser.
2. Set the water softener to the highest level.
3. Do a washing programme without dishes.
4. Adjustthe watersoftener.Refertothechapter'Setting
the water softener'.
5. Adjust the rinse aid dosage.
Different brands of detergent dissolve in different
times. Some detergent tablets do not have the best
cleaning results during short washing programmes. Use
long washing programmes when you use detergent tab-
lets to fully remove the detergent.
23
Page: 23
Setting and starting a washing programme
Do these steps to set and start a washing programme:
1. Close the door.
2. Turn the programme knob to set the washing pro-
gramme.Refertothechapter'Washingprogrammes'.
– The on/off indicator light comes on.
3. Press the start/cancel button.
– The washing programme starts automatically.
– The start/cancel indicator light comes on.
Whenthewashingprogrammeoperates,youcannot
change the programme. Cancel the washing pro-
gramme.
Warning! Only interrupt or cancel a washing
programme if necessary.
Caution! Open the door carefully. Hot steam can
come free.
Cancelling a washing programme
• Press and hold the start/cancel button until the start/
cancel indicator light goes off.
The washing programme is cancelled.
At this time you can do these steps:
1. Switch off the appliance.
2. Set a new washing programme.
Fill the detergent dispenser with detergent before you
set a new washing programme.
Interrupting a washing programme
Open the door.
• The programme stops.
Close the door.
• The programme continues from the point of interrup-
tion.
End of the washing programme
Switch off the appliance in these conditions:
• The appliance stops automatically.
• The end indicator light comes on.
For better drying results, keep the door ajar for some mi-
nutes before you remove the dishes.
Let the dishes cool down before you remove them from
the appliance. Hot dishes are easily damaged.
Removing the load
• First remove items from the lower basket, then from
the upper basket.
• There can be water on the sides and door of the appli-
ance. Stainless steel becomes cool more quickly than
the dishes.
Care and cleaning
Warning! Switch the appliance off before you clean
the filters.
Cleaning the filters
Important! Do not use the appliance without the filters.
Make sure that the installation of the filters is correct.
Incorrect installation will cause unsatisfactory washing
results and damage to the appliance.
1 2
Fully clean the filters A, B
and C below running wa-
ter.
24
Page: 24
3
To remove filters B and C,
turn the handle approxi-
mately 1/4 anticlockwise.
4
Remove the flat filter A
from the bottom of the ap-
pliance.
5
Put the flat filter A in the
bottom of the appliance.
Install the flat filter cor-
rectly under the two
guides D.
6
Put the filter system in po-
sition. To lock the filter
system, turn the handle
clockwise until it locks in
position.
Important! Do not remove the spray arms.
If the holes in the spray arms become clogged, remove
remaining parts of soil with a cocktail stick.
External cleaning
Clean the external surfaces of the appliance and control
panel with a damp soft cloth. Only use neutral detergents.
Do not use abrasive products, scouring pads or solvents
(acetone, trichloroethylene etc...).
Frost precautions
Caution! Do not install the appliance where the
temperature is below 0 °C. The manufacturer is not
responsible for damage because of frost.
If not possible, empty the appliance and close the door.
Disconnect the water inlet hose and remove water from
the water inlet hose.
What to do if…
The appliance does not start or stops during operation. If there is a fault, first try to find a solution to the problem
yourself. If you cannot find a solution to the problem
yourself, contact the Service Force Centre.
Fault code and malfunction Possible cause and solution
• continuous flash of the start/cancel in-
dicator light
• 1 flash of the end indicator light
The dishwasher does not fill with water
• The water tap is blocked or furred with limescale.
Clean the water tap.
• The water tap is closed.
Open the water tap.
• The filter in the water inlet hose is blocked.
Clean the filter.
• The connection of the water inlet hose is not correct. The hose can
be kinked or squashed.
Make sure that the connection is correct.
25
Page: 25
Fault code and malfunction Possible cause and solution
• continuous flash of the start/cancel in-
dicator light
• 2 flashes of the end indicator light
The dishwasher will not drain
• There is a blockage in the sink spigot.
Clean the sink spigot.
• The connection of the water drain hose is not correct. The hose can
be kinked or squashed.
Make sure that the connection is correct.
• continuous flash of the start/cancel in-
dicator light
• 3 flashes of the end indicator light
The anti-flood device operates
• Close the water tap and contact your local Service Force Centre.
The programme does not start • The appliance door is not closed.
Close the door.
• Mains plug is not connected in.
Put in the mains.
• The fuse has blown out in the household fuse box.
Replace the fuse.
After the check, switch on the appliance. The programme
continuesfromthepointofinterruption.Ifthemalfunction
shows again, contact your Service Force Centre.
These data are necessary to help you quickly and cor-
rectly:
• Model (Mod.)
• Product number (PNC)
• Serial number (S.N.)
For these data, refer to the rating plate.
Write the necessary data here:
Model description : ..........
Product number : ..........
Serial number : ..........
The cleaning results are not satisfactory
The dishes are not clean • The selected washing programme is not applicable for the type of load and
soil.
• The baskets are loaded incorrectly so that water cannot reach all surfaces.
• Spray arms do not turn freely because of incorrect arrangement of the load.
• The filters are dirty or not correctly installed.
• The quantity of detergent is too little or missing.
Limescalesparticlesonthedishes • The salt container is empty.
• The water softener is adjusted on a wrong level.
• The salt container cap is not closed correctly.
The dishes are wet and dull • No rinse aid has been used.
• The rinse aid dispenser is empty.
There are streaks, milky spots or
a bluish coating on glasses and
dishes
• Decrease the rinse aid dosage.
Dry water drop signs on glasses
and dishes
• Increase rinse aid dosage.
• The detergent can be the cause.
26
Page: 26
Technical data
Dimensions Width cm 60
Height cm 85
Depth cm 61
Electrical connection - Voltage -
Overall power - Fuse
Information on the electrical connection is given on the rating plate on the
inner edge of the dishwasher door.
Water supply pressure Minimum 0,5 bar (0,05 MPa)
Maximum 8 bar (0,8 MPa)
Capacity Place settings 12
Environment concerns
The symbol on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it should be taken to the
appropriate collection point for the recycling of electrical
and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential
negative consequences for the environment and human
health, which could otherwise be caused by inappropriate
waste handling of this product. For more detailed
information about recycling of this product, please
contactyourlocalcouncil,yourhouseholdwastedisposal
service or the shop where you purchased the product.
The packaging materials are environmentally friendly and
can be recycled. The plastic components are identified by
markings, e.g. >PE<, >PS<, etc. Discard the packaging
materials in the applicable container at the community
waste disposal facilities.
Warning! To discard the appliance, follow the
procedure:
• Pull the mains plug out of the socket.
• Cut off the mains cable and mains plug and discard
them.
• Discard the door catch. This prevents the children to
close themselves inside the appliance and endanger
their lives.
Installation
Warning! Make sure that mains plug is
disconnected from the mains socket during
installation.
Fitting under a counter
Puttheapplianceadjacenttoawatertapandawaterdrain.
Remove the appliance worktop to install it under a sink
unit or a kitchen worktop. Make sure that the dimensions
of the recess agree with the given dimensions.
1 2
27
Page: 27
3 4
Install the appliance worktop to the appliance if you want
to use the dishwasher as a freestanding appliance.
The plinth on freestanding appliance is not adjustable.
Adjusting the level of the appliance
Make sure that the appliance is level to close and seal the
door correctly. If the level of the appliance is correct, the
door does not catch on the sides of the cabinet. If the door
does not close correctly, loosen or tighten the adjustable
feet until the appliance is level.
Water connection
Water inlet hose
Connected the appliance to a hot (max. 60°) or cold water
supply.
If the hot water comes from alternative sources of energy
that are more environmentally friendly (e.g. solar or pho-
tovoltaic panels and aeolian), use a hot water supply to
decrease energy consumption.
Connect the inlet hose to a water tap with an external
thread of 3/4”.
Caution! Do not use connection hoses from an old
appliance.
The water pressure must be in the limits (refer to the
chapter 'Technical data'). Make sure that the local water
authority gives you the average mains pressure in your
area.
Make sure that there are no kinks in the water inlet hose
andthatthewater inlet hoseis notsquashed orentangled.
Turn the inlet hose to the left or the right to suit the in-
stallation. Fit the locknut correctly to prevent water leaks.
Caution! Do not connectthe appliance to new pipes
or pipes that are not used for a long time. Let the
water run for some minutes, then connect the inlet hose.
Drain hose
1
Connect the water drain
hose to the sink spigot.
3 4
The internal diameter must not be smaller than the diam-
eter of the hose.
If you connect the water drain hose to a trap spigot under
the sink, remove the plastic membrane (A). If you do not
removethemembrane,remainingfoodcancauseablock-
age in the drain hose spigot.
Caution! Make sure that the water couplings are
tight to prevent water leakage.
28
max 85 cm
min 40 cm
max
400
cm
2
Page: 28
Electrical connection
Warning! The manufacturer is not responsible if
you do not follow these safety precautions.
Ground the appliance according to safety precautions.
Make sure that the rated voltage and type of power on the
rating plate agree with the voltage and the power of the
local power supply.
Always use a correctly installed shockproof socket.
Do not use multi-way plugs, connectors and extension
cables. There is a risk of fire.
Do not replace the mains cable yourself. Contact the
Service Force Centre.
Make sure that the mains plug is accessible after
installation.
Do not pull the mains cable to disconnect the appliance.
Always pull the mains plug.
29

Question & answers

There are no questions about the Zanussi ZDF1000 yet.

Ask a question about the Zanussi ZDF1000

Have a question about the Zanussi ZDF1000 but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Zanussi ZDF1000. Please make sure that you describe your difficulty with the Zanussi ZDF1000 as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.