Read this manual carefully before use, and retain it for
Wristband Charging Cable
Heart Rate Sensor
Insert one end of the fitness tracker into the slot from
the front of the wristband.
Press down on the other end with your thumb to
push the fitness tracker completely into the slot.
1. Comfortably tighten the band around your wrist,
about 1 finger width away from your wrist bone.
2.To achieve the optimal performance of the heart
rate sensor, make sure its back to contact with your
skin. When wearing your wristband, keep it neither
too tight nor too loose but leaving some space for
the skin to be able to breathe. Tighten the wristband
before you start to exercise and properly loosen it
Too loose Just right
If the band can easily
move up and down the
wrist, or the heart rate
sensor cannot collect the
data, try tightening the
The band can
around the wrist.
1.Scan the QR code to download and install the latest
version of the Mi Fit app, or search for it in Google Play,
App Store, or other third-party app stores.
Mi Fit app QR code
（Android 5.0 & iOS 10.0 or above）
The band did not receive a pairing request
Confirm the pairing on your band
Allow to pair
Allow to pair
2.Log into your Mi account in the Mi Fit app, and follow
the instructions to connect and pair the band with
your phone. Once the band vibrates and a pairing
request is displayed on its screen, tap the touch
button to complete the pairing with your phone.
Note: Make sure the Bluetooth on your phone is
enabled. Hold the phone and the band close to each
other during pairing.
After successfully pairing with your device, the band
will start tracking and analyzing your daily activities
and sleeping habits.
Touch the button to light up the screen. Swipe up or
down to view various functions such as exercise data,
and heart rate measurements. Swipe right to return
to the previous page.
Swipe up/down to
switch between functions
Swipe right to return to
the previous page
Remove the band from your wrist, hold on to each
end and pull on the wristband until you see a small
gap between the fitness tracker and the wristband.
Use your finger to pop the fitness tracker out of its
slot from the front side of the wristband.
Recharge your band immediately when the battery
level is low.
When using the band to measure your heart rate,
please keep your wrist still.
The Mi Smart Band 5 has a water resistance rating of
5 ATM. It can be worn in the shower, swimming pool,
or while swimming near the shore. It cannot be used,
however, in a sauna or while scuba diving.
The function of the touch button and touchscreen are
not accessible during underwater. When your band
comes in contact with water, use a soft cloth to wipe
away excess water from its surface before using it.
During daily use, avoid wearing the band too tightly
and try to keep its contact area dry. Please clean the
wristband regularly with water.
Please stop using the product immediately and seek
medical assistance if the contact area on your skin
shows signs of redness or swelling.
Name: Mi Smart Band 5
Fitness Tracker Net Weight: 11.9 g
Fitness Tracker Dimensions: 47.2 x 18.5 x 12.4 mm
Wristband Material: Thermoplastic elastomer (TPE)
Clasp Material: Aluminum alloy
Adjustable Length: 155–219 mm
Compatible with: Android 5.0 & iOS 10.0 or above
Battery Capacity: 125 mAh
Battery Type: Lithium polymer battery
Input voltage: DC 5.0 V
Input Current: 250 mA Max.
Water Resistance: 5 ATM
Bluetooth Frequency: 2402–2480 MHz
Max. Output: ≤13 dBm
Operating Temperature: 0°C to 45°C
Wireless Connectivity: Bluetooth 5.0 BLE
Disposal and Recycling Information
All products bearing this symbol are waste
electrical and electronic equipment (WEEE
as in directive 2012/19/EU) which should not
be mixed with unsorted household waste.
Instead, you should protect human health
and the environment by handing over your
waste equipment to a designated collection
point for the recycling of waste electrical
and electronic equipment, appointed by the
government or local authorities. Correct
disposal and recycling will help prevent
potential negative consequences to the
environment and human health. Please
contact the installer or local authorities for
more information about the location as well as
terms and conditions of such collection points.
Certifications and Safety Approvals
For regulatory information, product certification, and
compliance logos related to the Mi Smart Band 5,
please go to More > Settings > Regulatory.
Hereby, Anhui Huami Information
Technology Co., Ltd., declares that the radio
equipment type XMSH10HM is in
compliance with Directive 2014/53/EU. The
full text of the EU declaration of conformity
is available at the following internet address:
Manufactured for: Xiaomi Communications Co., Ltd.
Manufactured by: Anhui Huami Information
Technology Co., Ltd. (a Mi Ecosystem company)
Address: Room 1201, Building A4, National Animation
Industry Base, No. 800 Wangjiang West Road, Gaoxin
District, Hefei, Anhui, China
For further information, please go to www.mi.com
As a Xiaomi consumer, youbenefit under certain conditions from
additional warranties. Xiaomi offers specific consumer warranty
benefits which are in addition to, andnot instead of, any legal
warranties providedby your national consumer law. The duration
and conditions related to the legal warranties are providedby
respective locallaws. For more information about the consumer
warranty benefits, please refer to Xiaomi's official website
https://www.mi.com/en/service/warranty/. Except as prohibited
by laws or otherwise promisedby Xiaomi, the after-sales services
shallbe limited to the country or region of the originalpurchase.
Under the consumer warranty, to the fullest extent permittedby
law, Xiaomi will, at its discretion, repair, replace or refund your
product. Normal wear and tear, force majeure, abuse or damage
causedby the user's negligence or fault are not warranted. The
contact person for the after-sale service may be any person in
Xiaomi's authorized service network, Xiaomi's authorized
distributors or the final vendor who sold the products to you. If in
doubt please contact the relevant person as Xiaomi may identify.
The present warranties do not apply inHong Kong and Taiwan.
Products which were not duly imported and/or were not duly
manufacturedby Xiaomi and/or were not duly acquired from
Xiaomi or a Xiaomi’s official seller are not coveredby the present
warranties. As per applicable law youmay benefit from warranties
from the non-officialretailer who sold the product. Therefore,
Xiaomi invites you to contact the retailer from whom you
purchased the product.