Whirlpool AZB 6070 manual

View a manual of the Whirlpool AZB 6070 below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Whirlpool
  • Product: Dryer
  • Model/name: AZB 6070
  • Filetype: PDF
  • Available languages: German, English

Table of Contents

Page: 0
1
Machine operation
Additional information (including troubleshooting and service) can be found in the individual sections of the
Instructions For Use.
Sort laundry by:
Material thickness: whenever the load is greater than the dryer can handle,
separate laundry according to weight (e.g. dry towels and thin underwear separately).
Type of material: cotton (linen); synthetic textiles (easy care).
Dryness level: cupboard dry, iron dry etc.
Do not tumble dry: woollens, silk, nylon stockings, delicate embroidery, fabrics with
metallic decorations, bulky items such as sleeping bags or pillows.
Check that all fastenings are closed and that pockets are empty. Ensure that there are
no cigarette lighters in the wash. Turn laundry inside out.
Place laundry loosely in the drum to achieve even drying throughout. Then close the
door.
Select the required drying programme by turning the programme selector knob (for
information, refer to programme table).
Select the required option by pressing the corresponding button.
The indicator lamp above the relevant button lights up to confirm your selection.
A fast blinking LED indicates that an invalid selection has been made (incompatible
option). Press the button again to cancel the option.
Start the drying programme by pressing the “Start (Pause)” button.
The relevant indicator lamp lights up.
Changing programme selection: if the selected programme is changed during
drying, the dryer stops. The “Start (Pause)” indicator lamp flashes.
To run the new programme, press the “Start (Pause)” button again.
Interrupting programme: to interrupt a drying cycle, press the “Start (Pause)”
button and open the door. Wait at least 5 minutes, to allow the laundry to cool down,
before unloading the dryer. For your safety, the drying cycle stops automatically if you
open the door. To restart the cycle after opening the door, press the “Start (Pause)”
button again.
Warning: never stop a tumble dryer before the end of the drying cycle, unless all
items are quickly removed and spread out so that the heat is dissipated.
The final part of a drying cycle occurs without heat (cool-down cycle) to ensure that
the items reach a lower temperature to avoid wrinkling.
End: take the laundry out of the dryer. The drying process is complete and the anti-
crease phase has been reached (active).
Set the programme selector knob to “Off” (“O”).
Set the programme selector knob to “Off” (“O”).
Cleaning the lint filter: open door, pull lint filter up and out of machine and open it. Brush lint using a soft brush or your
fingertips. Close lint filter and push firmly back into place (more detailed informations are given in the Instructions For Use).
Emptying the water container: pull container out by the handle and empty. Replace the container when empty by pushing it
completely back into place.
Please note: only use additives/plastic items specified as dryer safe and rinse items that have been treated with stain remover
thoroughly in plenty of water before drying. Never dry rubber objects or objects stained with vegetable oils in the dryer.
The Manufacturer is not liable for any damage to laundry resulting from inadequate or incorrect fabric care instructions which
have been provided with the garment or article.
Sort laundry according to
care symbols
Do not tumble dry
Suitable for tumble drying -
Suitable for tumble drying
at low temperatures
Prepare laundry
Load dryer
Select programme
Select options
(if available)
Start dryer
Programme end -
unload dryer
Switch dryer off
Page: 1
*
Weight
of
average
and
maximum
load.
**
Test
programmes
according
to
EN
61121,
tested
with
maximum
rated
load
capacity.
2
Overview
of
programmes
Options
Approximate
drying
times
(in
minutes)
Programmes
/
Drying
levels
Type
of
textile
Fabrics
Volume
of
load
kg
*
Gentle
Schonen
Buzzer
Summer
Start
delay
Start-
vorwahl
Very
wet
load
Wet
load
Extra
dry
Multi-layered,
thick
laundry
such
as:
terry
towels,
terry
towelling
bath
robes.
Cotton
or
linen
hot
wash/
coloured
laundry
Max.
6
kg
3.0
6.0
X
X
X
75’
140’
65’
120’
Cupboard
dry
+
Terry
towels,
dry
towels,
bed
linen,
underwear.
3.0
6.0
X
X
X
70’
115’
60’
100’
Cupboard
dry
**
Similar
types
of
laundry
which
do
not
require
ironing
such
as:
dry
towels,
bed
linen,
underwear,
baby
clothes,
T-shirts,
cotton
socks.
3.0
6.0
X
X
X
65’
105’
55’
90’
Iron
dry
**
Laundry
which
requires
ironing
such
as:
bed
and
table
linen,
dry
towels,
T-shirts,
polo
shirts,
work
clothes.
3.0
6.0
X
X
X
50’
90’
40’
75’
Extra
dry
Laundry
with
thick,
multi-layered
areas
such
as:
bed
and
table
linen,
track
suits,
anoraks,
blankets.
Synthetic,
mixed
fibre
or
cotton
easy
care
(ironing
not
required)
laundry
Max.
3
kg
1.0
3.0
X
X
X
35’
70’
25’
55’
Cupboard
dry
**
Laundry
which
does
not
require
ironing
such
as:
shirts,
blouses,
T-shirts,
sportswear.
1.0
3.0
X
X
X
25’
45’
20’
35’
Iron
dry
Laundry
which
requires
ironing
such
as:
trousers,
dresses,
skirts,
shirts,
blouses.
1.0
3.0
X
X
X
20’
40’
15’
30’
Delicate
plus
Low
drying
intensity
for
delicates
and
items
such
as:
trousers,
dresses,
shirts,
blouses.
Laundry
made
from
synthetic
fibres
Max.
2.5
kg
2.5
X
X
X
85’
70’
Mixed
load
T-shirts,
blouses,
towels,
underwear,
sportswear.
Cotton
-
Synthetic
blend
Max.
3
kg
3.0
X
X
X
80’
60’
Laundry
is
aired,
refreshed
and
loosen
up
for
30
minutes
without
heating.
All
textiles.
—
—
X
—
—
—
10’
20’
30’
40’
60’
Additional
drying
time
for
textiles
that
are
not
suitable
for
other
programmes,
or
for
finalisation
of
the
drying
process.
All
fabrics
—
X
X
—
10’
20’
30’
40’
60’
Cotton Easy
care Special
programmes Airing Drying
times
Page: 2
3
How to proceed if...
...you want to check the dryer yourself first: (If your machine is not functioning correctly, please
check the following points before calling the Customer Service department - also refer to relevant
section in the Instructions For Use).
Drying takes too long/
Laundry is not dry enough
• Was the inserted laundry too wet (washing machine spin speed less than 1000 rpm)?
• Is the lint filter dirty? (filter indicator light on)
• Is the heat exchanger dirty? (for more information, refer to the Instructions For Use)
• Is the room temperature too high?
• Are the “End” and “Anti-crease” indicator lamps lighting up? The drying cycle is
complete and the laundry can be taken out.
• If the drying result does not meet your expectation, select a drier programme or use
the dryness adjustment option (if available).
• Are thin and thick laundry mixed? Are different types of materials mixed? Sort the
laundry by thickness and material, then dry it again.
The dryer does not
operate (after a power
failure, always press the
“Start (Pause)” button)
• Is the plug properly inserted into the mains electricity socket?
• Is there a power failure?
• Has the fuse blown?
• Is the door properly closed?
• Has a drying programme been selected?
• Has the “Start (Pause)” button been pressed?
• Has the start delay option been selected?
• Is the dryer overloaded? Please remove some of the load.
Lint filter, water container
or heat exchanger
indicator lamp on
• Is the lint filter clean?
• Is the water container empty?
• Has the water container been inserted correctly?
• Is the heat exchanger clean and inserted correctly?
Water droplets
underneath the dryer
• Has the heat exchanger been inserted correctly?
• Has all lint on the heat exchanger seal and the door seal been wiped away?
• Has the water container been inserted correctly?
• If the direct drain connection is used, is it tight?
• Is the dryer levelled?
...you want to care for and clean your dryer:
Clean the filter at the end
of every cycle
• Brush lint using a soft brush or your fingertips.
• Close the filter.
• Push the filter back into place.
Empty the water container
at the end of every drying
cycle
• Pull the handle to remove the water container.
• Empty the water container.
• Replace the empty water container by pushing it fully back into place.
Clean the heat exchanger
at least once a month
• Clean the heat exchanger under running water.
• Remove all lint from the seals.
• Clean the heat exchanger housing (for further information see section “Cleaning the
heat exchanger” in the Instructions for Use).
Page: 3
4
Failure codes
In the event that the dryer malfunctions, one of the following failure codes may be displayed.
Depending on the model of your dryer, the failure may be displayed in letters or by different
blinking LEDs.
Failure code LED failure code Check to be carried out by customer before service call
F01 Please call the After-Sales Service.
F02 Please call the After-Sales Service.
F03 Please call the After-Sales Service.
F04 Please call the After-Sales Service.
F05
Turn the dryer OFF and unplug it. Make sure that the ambient temperature is
between 5°C and 35°C. Wait for 1 hour. Plug the dryer back in and restart it. If the
failure reoccurs, please call the After-Sales Service.
F06
Turn the dryer OFF and unplug it. Make sure that the ambient temperature is
between 5°C and 35°C. Wait for 1 hour. Plug the dryer back in and restart it. If the
failure reoccurs, please call the After-Sales Service.
F07 Please call the After-Sales Service.
Start LED blinks
2 times per
second when
pressed
Make sure that the door is correctly closed and the heat exchanger correctly positioned.
If the failure reoccurs, please call the After-Sales Service.
LED not blinking LED blinking
Page: 4
GB Quick Reference Guide
Before using the machine, please also read the Instructions For Use carefully!
5
AZB 6070
5019 307 01352
(Subject to technical modifications)
Indicator lamps
Programme selector knob
The drying programme is selected by
turning this knob. The “Start (Pause)”
indicator lamp flashes.
“Start (Pause)” button
The drying programme is started by
pressing this button. The indicator lamp
lights up.
Filter
The indicator lamp lights up when the
filter and/or the heat exchanger and its
housing need to be cleaned.
Clean the filter at the end of every
drying cycle.
Water container
The indicator lamp lights up when the
water container needs to be emptied.
The drying cycle is automatically
interrupted. Empty the container and
restart the drying programme.
Empty the water container after
every drying cycle.
End
The drying programme is finished. Please
unload the dryer.
Overdry protection / 6th
Sense
The indicator lights up when a humidity
controlled programme is selected, to
indicate the activated protection function.
Gentle
Selecting this option will reduce the
drying temperature. This option cannot
be selected when the “Rapid” option is
selected (if available).
Buzzer
When this option is pressed, a buzzer will
indicate the end of the drying cycle. This
option deactivates the “Anti-crease”
function, if it is activated.
Start delay
Delays the start of the drying cycle by 3, 6
or 9 hours. Each time the button is
pressed the delay is increased by 3 hours.
Press the “Start (Pause)” button to
confirm the final selection and to start the
dryer. The LEDs above the programme
selector knob flash to indicate the
selected time. During the countdown, the
drum will turn from time to time to
redistribute the laundry and the pump will
start to pump water in the water
container. To cancel or change the
previously set time delay, set the index of
the programme selector knob to the
“Off” position, or open the door.

Question & answers

There are no questions about the Whirlpool AZB 6070 yet.

Ask a question about the Whirlpool AZB 6070

Have a question about the Whirlpool AZB 6070 but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Whirlpool AZB 6070. Please make sure that you describe your difficulty with the Whirlpool AZB 6070 as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.