Whirlpool AWM 6121 manual

View a manual of the Whirlpool AWM 6121 below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Whirlpool
  • Product: Washing Machine
  • Model/name: AWM 6121
  • Filetype: PDF
  • Available languages: Dutch, English, German

Table of Contents

Page: 13
5019 301 05126
Whirlpool is a registered trademark of Whirlpool USA.
Programme
Care
Labels
Type of wash / Notes
Max
Load
Detergents and additives Special options Max
Spin Speed
rpm
Programme
Selector
Bleach Softener Main
Wash
Prewash Start
Delay
Rapid Prewash Intensive
Rinse
Rinse
Hold
Spin Speed
Reduction
Kg
Dèpart
retardé
Express
Pre-
lavage
Rinçage
plus
Arrêt
Cuve
Pleine
Essorage
Cotton/
Coloured cotton
Slightly to normally soiled bed linen, table linen and underwear, towels, shirts etc.
made of cotton and linen.
With heavily soiled laundry the additional “Prewash” option can be selected as well.
Normal
5.0
Rapid
3.0
❉ ❉ Yes ❉ ❉ ❉ ❉ ❉ ❉ ❉ 1200
Coton
95°,60°,40°
Cotton
short
Slightly soiled bed linen, table linen and underwear, towels, shirts etc. made of
cotton and linen.
Normal
5.0
Rapid
3.0
❉ ❉ Yes ❉ ❉ ❉ ❉ ❉ ❉ ❉ 1200
Coton
Court 30°
Synthetics
Slightly to normally soiled blouses, shirts, overalls etc. made of polyester (Diolen,
Trevira), polyamide (Perlon, Nylon) or blends with cotton.
Normal
2.5
Rapid
1.5
— ❉ Yes ❉ ❉ ❉ ❉ ❉ ❉ ❉ 1)
800 1) Synthétiques
60°,40°
Synthetics
short
Slightly soiled overalls and sports wear made of cotton, polyester, polyamide and
blends with cotton.
2.5 — ❉ Yes — ❉ — — ❉ ❉ ❉ 1200
Synthétiques
Court 30°
Delicates Curtains and delicate clothing, dresses skirts, shirts and blouses. 1.5 — ❉ Yes ❉ ❉ — ❉ — ❉ ❉ 1)
800 1) Délicat
40°,30°
Wool
Only woollens with a felt-free finish, labelled with the woolmark and identified as
machine washable.
If you select “Rinse Hold” do not leave items to soak for too long.
1.0 — ❉ Yes — ❉ — — — ❉ ❉ 1)
800 1) Laine,
Laine Froid
Silk
Textiles made of linen, silk, wool and viscose marked as “handwashable”.
If you select “Rinse Hold” do not leave items to soak for too long. No spinning.
1.0 — ❉ Yes — ❉ — — — ❉ — 0 2) Soie
Rinse + spin — Same as the last rinse and the final spin in the “Coloured Cotton” programme. 5.0 — ❉ — — ❉ — — ❉ ❉ ❉ 1200
Rinçage +
Essorage
Spin —
In this programme spinning is intensive. Same as the spin cycle in the “Coloured
Cotton” programme.
5.0 — — — — ❉ — — — — ❉ 1200 Essorage
Gentle spin — In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme. 1.5 — — — — ❉ — — — — ❉ 1)
800 1) Essorage
court
Drain — Drain only - no spinning. Alternative method of terminating programme after “Rinse Hold”. — — — — — — — — — — — — Vidange
A. Programme Sequence Indicator
B. “Start/Pause” Button
C. “Door Open” Indication
D. “Start Delay” Button
E. “Spin Speed Reduction” Button
Selecting any option the indication lights up.
When the combination of programme, additional
options and temperature is not possible, the
indication lights switch off automatically.
Unsuitable combinations of options are
deselected automatically.
❉: optional / Yes: dosing required
1 For improved garment care spin speed is restricted to
800 rpm in this programme.
2 For improved garment care spin speed is null in this
programme.
A B
D
C
E
AWM 6121
GB
3gb05126.fm5 Page 1 Friday, December 15, 2000 6:47 PM
Black Process Plate
Page: 14
5019 301 05126
Whirlpool is a registered trademark of Whirlpool USA.
Prewash cycle increases programme duration approximately 15 min. Consumption values were measured in normalized
conditions in compliance with Standard IEC 60 456. Consumption data in the home may vary with respect to the values in
the table in relation to the water supply pressure and temperature, the load and the type of wash.
* The remaining time indicator can similarly deviate from the values in the table, because it takes into account the
household conditions applicable at that time.
**To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains
the water out.
Add the detergent as described in the programme
table or in the chapter “Detergents and Additives”
in the booklet.
1. Turn the programme selector knob to the
desired programme and temperature.
2. The remaining time display shows the duration of
the chosen programme (in hours and minutes)
and after taking some seconds for calculating,
the pilot lamp of the “Start/Pause” button is
flashing.
3. The programme sequence and the predefined
spin speed indication corresponding to the
selected programme lights up.
Selecting any option the indication lights up.
When the combination of programme, additional
options and temperature is not possible, the
indication lights switch off automatically.
Unsuitable combinations of options are
deselected automatically.
“Rapid Wash” button
• For quick, economical washes. Ideal for minimum
loads of lightly-soiled articles.
Note: reduce the detergent quantity.
“Prewash” button
• Only for heavily soiled loads (for example sand,
granular dirt) sensible. The cycle time increases
approximately 15 min.
“Intensive Rinse” button
• More water and a longer time in rinse cycle is added.
• This option is particularly suitable for areas with
very soft water, washing baby linen and helps
people with allergies.
“Rinse Hold” button
• The laundry remains in the last rinse water without
progressing to the final spin cycle to avoid
creasing and prevent colours from changing.
• This option is particularly recommended for the
programme “Synthetics” or “Delicates”.
• This function is particularly useful if you want to
postpone spinning to a later time, or if you want
to drain only.
Note: The programme stops to “Rinse Hold” at the
time the “Rinse Hold” light in the programme flow
indication is on.
CONSUMPTION DATA
Programme
Temperature
Selector
(°C)
Load
(kg)
Water
(l)
Energy
(kWh)
Approx.
Programme
Duration
(hours : minutes)*
Cotton 95 5.0 49** 1.70 1:50
Cotton 60 5.0 44 0.95 2:00
Cotton 40 5.0 44 0.55 1:50
Synthetics 60 2.5 55 0.80 1:25
Synthetics 40 2.5 50 0.60 0:50
Synthetics short 30 3.0 37 0.40 0:30
Delicates 30 1.5 50 0.50 0:45
Wool 30 1.0 55 0.50 0:40
Silk 30 1.0 37 0.40 0:40
ADD DETERGENTS, CLOSE THE DOOR AND SELECT
THE PROGRAMME
SELECT ANY DESIDERED OPTION
Terminate the “Rinse Hold” option:
• Press the “Rinse Hold” button again; the
programme will terminate automatically with the
final spin cycle for the present wash programme.
• If you do not wish to spin the clothes, turn the
programme selector knob to the “Drain”
programme and press the “Start/Pause” button
again when flashing.
“Spin Speed Reduction” button
• Every programme has an automatic predefined
maximum spin speed.
• Press the button to set another spin speed.
• If the spin speed “0” is selected, the final spinning
is cancelled but intermediate spin peaks remain
during rinse. The water is drained out only.
The “Start Delay” allows to run the machine at the
consumer’s convenience, for example at night
when electricity is cheaper.
• Press the “Start Delay” button to select the
delay time by 1 to 23 hours;
• Press the “Start/Pause” button.
• The time delay indication disappears when the
programme starts and it is replaced by the
remaining time.
• The number of hours preselected can later be
reduced pressing again the “Start Delay” button.
To cancel the “Start Delay”.
• Turn the programme selector to the “ ” position.
• Reselect the desired programme and options
and press the “Start/Pause” button.
Open the tap and press the “Start/Pause” button.
The pilot lamp of the “Start/Pause” button lights up.
The indicator lamps show the sequence reached in
the programme. After starting the programme, the
sequence indication runs from left to right through
Wash, Rinse, Spin.
When the sequence of the programme is finished
the corresponding lamp goes out.
The door can be opened when the “Door Open”
indication is on.
• The remaining time is on “0:00” and all the
lights of the programme sequence indication
are off.
1. Turn the programme selector to the “ ”
position.
2. Turn the water supply tap off.
3. Open the door and unload the machine.
4. Close the tap and leave the door ajar to allow
the drum to dry out.
1. Press the “Start/Pause” button to pause the
programme. The light flashes.
2. Select the new programme (with temperature),
any options and another spin speed if you want.
3. Press the “Start/Pause” button again. The
new programme continues at the same position
where the previous programme was
interrupted. Do not add detergent for this
programme.
1. Press the “Start/Pause” button to pause the
programme. The light flashes.
2. Set the programme selector to “Drain”. The
spin indicators show “0” and the remaining
time shows “0:02”.
3. Press the “Start/Pause” button to start the
drain programme.
START DELAY
PROGRAMME START
DOOR LOCK
PROGRAMME END
CHANGE THE PROGRAMME, OPTIONS AFTER
PROGRAMME START
CANCEL A PROGRAMME BEFORE THE END
3gb05126.fm5 Page 2 Friday, December 15, 2000 6:47 PM
Black Process Plate

Question & answers

There are no questions about the Whirlpool AWM 6121 yet.

Ask a question about the Whirlpool AWM 6121

Have a question about the Whirlpool AWM 6121 but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Whirlpool AWM 6121. Please make sure that you describe your difficulty with the Whirlpool AWM 6121 as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.