View a manual of the Sylvania 6420FD below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.
This TV can receive C1 and C2 Caption and Text. Caption Mode (1)Closed Caption Characters can be displayed on the TV screen only when the received broad- cast signal contains Caption Signals. (2)Paint-on mode: Displays input characters on the screen immediately. Pop-on mode: Once characters are stored in memory, they are displayed all at once. Roll-up mode: Displays the characters continuously by scrolling (max. 4 lines) Note: If CAPTION C1 or C2 is selected but a Closed Caption signal is not included, characters will not be displayed. Text Mode (1)Displays the text on the screen by scrolling (max. 7 lines) (2)If the received broadcast signal does not contain caption or text signals, no change will occur. Notes: (1)When your TV receives a special effects playback signal (i.e., Search, Slow, Still) from a VCR’s video output channel (CH3 or CH4), your TV may not display the correct caption or text. (2)Captions and texts may not match the TV voice exactly. (3)Interference may cause the closed caption system not to function properly. (4)The caption or text characters will not be displayed while the menu display or functions dis- play is shown. (5)If you see this screen: If your TV displays a black box on the screen, this means that your TV is set to TEXT mode. To clear screen, select CAPTION C1, C2 or CAPTION [OFF]. ANTENNA/CABLE CONNECTIONS PRECAUTIONS ● Place your TV in a room with adequate ventilation. ● Keep your TV set away from sources of direct heat, such as heat registers or direct sunlight. ● Do not place your TV on soft surfaces, such as rugs or blankets. ● Leave enough room for air to circulate around the bottom, top and back of the set. FEATURES ● Flat Screen Picture Tube ● MTS/SAP Tuner ● 181 Channel Selection- All VHF/UHF channels plus up to 125 cable channels. ● PLL Frequency Synthesized Tuning- The latest PLL frequency synthesized electronic tun- ing system provides easy channel selection, and lets you tune directly to any channel using the channel number buttons (0~9 and +100-key) on the remote control. ● On-Screen Function Display. ● Full-Function Remote Control ● Sleep Timer ● Closed Caption Decoder- You may view specially labeled (cc) TV programs, movies, news, prerecorded tapes, etc. with either a dialogue caption or text display added to the program. ● Auto Shut Off Function- If there is no air signal input from the antenna terminal and no user operation for 15 minutes, the TV will turn itself off automatically. ● V-CHIP- Enables parents to prevent their children from watching inappropriate material on TV. ● S-VIDEO Input- Allows you to get better picture detail and clarity for the playback of S-VHS VCR tapes or Video Discs. Date of Purchase Dealer Purchase from Dealer Address Dealer Phone No. Model No. Serial No. The serial number of this product may be found on the back of the TV. No others have the same serial number as yours. You should record the number and other vital information here and retain this book as a permanent record of your purchase to aid identification in case of theft. VIDEO 1 INPUT VIDEO L R ANT.IN S-VIDEO CLOSED CAPTION UHF Antenna (Not supplied) VHF Antenna (Not supplied) VHF/UHF Combiner (Not supplied) VHF/UHF Combination Antenna (Not supplied) UHF/VHF Rod Antenna (Not supplied) OR OR ANT. IN OUT IN 75-ohm Coaxial Cable From Cable System From Cable System or Satellite Antenna 75-ohm Coaxial Cable CATV Box * or Satellite Box (Not supplied) *Some cable TV systems use scram- bled signals and require a special con- verter to receive these channels. Consult your local cable company. Note to CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particu- lar, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical. FCC WARNING- This equip- ment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to oper- ate this equipment if an unau- thorized change or modification is made. IF YOU NEED ADDITIONAL ASSISTANCE FOR SET-UP OR OPERATING AFTER READING OWNER’S MANUAL, PLEASE CALL TOLL FREE 1-800-968-3429, OR VISIT OUR WEB SITE AT http://www.funai-corp.com Owner’s Manual Printed in China 0EMN02202 L6500UA * * * * * This Owner’s Manual is made of recycled paper. 20 INCH COLOR TELEVISION 6420FD AV input (stereo) CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. ATTENTION: POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND. SYLVANIA LIMITED WARRANTY FUNAI CORP. will repair this SYLVANIA product, free of charge in the USA in the event of defect in materials or workman- ship as follows: DURATION: PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase. Two (2) years for Picture Tube. Certain parts are excluded from this warranty. LABOR: FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date of original retail purchase. LIMITS AND EXCLUSIONS: THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE RECEIPT OR OTHER PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH THE PRODUCT TO OBTAIN SERVICE UNDER THIS WARRANTY. This warranty shall not be extended to any other person or transferee. This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing or if service was attempted by an unauthorized service center. This SYLVANIA Limited warranty does not apply to any the product not purchased and used in the United States. This warranty only covers failures due to defects in material or workmanship which occurs during normal use. It does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or product not sup- plied by FUNAI CORP., or damage which results from accident, misuse, abuse, mishandling, misapplication, alter- ation, faulty installation, improper maintenance, commercial use such as hotel, rental or office use of this product or damage which results from fire, flood, lightning or other acts of God. THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS. FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY, AND FIT- NESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS REPRESENTA- TIVES IN THE UNITED STATES. ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY FUNAI AUTHORIZED SER- VICE CENTER. THIS WARRANTY IS VALID WHEN THE UNIT IS CARRIED-IN TO FUNAI AUTHORIZED SERVICE FACILITY. THE PRODUCT MUST BE ACCOMPANIED BY A COPY OF THE ORIGINAL RETAIL PURCHASE RECEIPT. IF NO PROOF OF PURCHASE IS ATTACHED, THE WARRANTY WILL NOT BE HONORED AND REPAIRS COSTS WILL BE CHARGED. IMPORTANT: THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, YOU MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE, IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI CORP. ATTENTION: FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITHOUT PRIOR NOTICE. To locate your nearest SYLVANIA Authorized Service Center or general service procedure, please call 1-800-968-3429 or write to the following: FUNAI CORPORATION Customer Service 100 North Street; Teterboro, NJ 07608 Tel :1-800-968-3429 http://www.funai-corp.com PLEASE DO NOT SHIP YOUR UNIT TO THE TETERBORO ADDRESS. L6500UA.QX33 03.4.2 3:58 PM Page 1
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLI- ANCE TO RAIN OR MOISTURE. IMPORTANT SAFEGUARDS CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SER- VICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN THIS SYMBOL INDICATES THAT DAN- GEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRE- SENT WITHIN THIS UNIT. THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE. The important note is located on the rear of the cabinet. 1. Read instructions-All the safety and operating instruc- tions should be read before the appliance is operated. 2. Retain Instructions-The safety and operating instruc- tions should be retained for future reference. 3. Heed Warnings-All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow Instructions-All operating and use instructions should be followed. 5. Cleaning-Unplug TV from the wall outlet before clean- ing. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. EXCEPTION: A product that is meant for uninterrupt- ed service and, that for some specific reason, such as the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to unplugging the appliance in the cleaning description otherwise required in item 5. 6. Attachments-Do not use attachments not recommended by the TV manufacturer as they may cause hazards. 7. Water and Moisture-Do not use this TV near water, for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like. 8. Accessories-Do not place this TV on an unstable cart, stand, tripod, bracket, or table. The TV may fall, caus- ing serious injury to someone, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the TV. Any mounting of the appliance should follow the man- ufacturer’s instructions and should use a mounting accessory recom- mended by the manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn. AMEUBLES- Cet appareil ne doit être placé que sur un meuble (avec ou sans roulettes) recommandé par le fabricant. Si vous l’installez sur un meuble à roulettes, déplacez les deux ensembles avec précau- tion. Un arrêt brusque, l’utilisation d’une force excessive et des sur- faces irrégulières risquent de déstabiliser l’ensemble et de le renverser. 9. Ventilation-Slots and openings in the cabinet and the back or bottom are provided for ventilation and to ensure reliable operation of the TV and to protect it from overheating, these openings must not be blocked or covered. The openings should never be blocked by placing the TV on a bed, sofa, rug, or other similar sur- face. This TV should never be placed near or over a radiator or heat register. This TV should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufac- turer’s instructions have been adhered to . 10. Power Sources-This TV should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For TVs intended to operate from bat- tery power, or other sources, refer to the operating instructions. 11. Grounding or Polarization-This TV is equipped with a polarized alternating-current line plug(a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. PORTABLE CART WARNING S3126A 12. Power-Cord Protection-Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance. 13. Outdoor Antenna grounding-If an outside antenna or cable system is connected to the TV, be sure the anten- na or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA No. 70, provides information with respect to proper grounding of the mast and supporting struc- ture, grounding of the lead-in wire to an antenna dis- charge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding elec- trodes, and requirements for the grounding electrode. (Fig. A) 14. Lightning-For added protection for this TV receiver during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the TV due to lightning and power-line surges. 15. Power Lines-An outside antenna system should not be located in the vicinity of overhead power lines or other electric light of power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 16. Overloading-Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. 17. Object and Liquid Entry-Never push objects of any kind into this TV through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the TV. 18. Servicing-Do not attempt to service this TV yourself as opening or removing covers may expose you to dan- gerous voltage or other hazards. Refer all servicing to qualified service personnel. 19. Damage Requiring Service-Unplug this TV from the wall outlet and refer servicing to qualified service per- sonnel under the following conditions: a. When the power supply cord or plug is damaged or frayed. b. If liquid has been spilled, or objects have fallen into the TV. c. If the TV has been exposed to rain or water. d. If the TV does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as improper adjustment of other controls may result in damage and will often require extensive work by a qualified techni- cian to restore the TV to its normal operation. e. If the TV has been dropped or damaged in any way. f. When the TV exhibits a distinct change in perfor- mance-this indicates a need for service. 20. Replacement Parts-When replacement parts are required, be sure the service technician uses replace- ment parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, injury to persons or other hazards. 21. Safety Check-Upon completion of any service or repairs to this TV, ask the service technician to perform routine safety checks to determine that the TV is in proper operating condition. 22. Heat-This TV product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. FIGURE A EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE ELECTRIC SERVICE EQUIPMENT GROUND CLAMP NEC - NATIONAL ELECTRICAL CODE POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H) S2898A GROUND CLAMPS GROUNDING CONDUCTORS (NEC SECTION 810-21) ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) ANTENNA LEAD IN WIRE OPERATING CONTROLS AND FUNCTIONS 1. VIDEO (in) jack- Connect to the video output jack of a video camera/game, satel- lite, DVD or VCR. 2. AUDIO L/R IN jacks- Connect to the left/right channel audio output jacks of a video camera/game, satellite, DVD or VCR. NOTE: The AUDIO L (IN) jack is for mono input. The sound is heard from both speakers. Use this jack for monaural audio equipment to be hooked up. 3. MENU button- Press to display the menu on the TV screen. 4. VOLUME ▲/▼ buttons- Press to control the volume level. Press to determine the setting mode from the menu on the TV screen. (only the VOL ▲ button) Press to select or adjust from a particular menu. (for example: Language Selection, Channel Presetting, Closed Caption Selection, Picture Adjustment, V-CHIP Set Up) 5. CHANNEL ▲/▼ buttons- Press to select memorized channel. NOTE:You MUST PRESET channels BEFORE using CHANNEL ▲/▼ button. (See CHANNEL PRESETTING.) Press to select the setting mode from the menu on the TV screen. Press to select item you want to adjust in the picture control mode. 6. POWER button- Press to turn the TV ON and OFF. 7. Infrared Sensor Window- Receives the infrared control signals from the remote control unit. 8. CHANNEL NUMBER button- Press two digits to directly access the desired channel. Remember to press a "0" before a single digit channel. +100 button- Press to select cable channels higher than 99. 9. MUTE button- Press the MUTE button to turn off the sound portion of the TV pro- gram. (Volume level display turns LIGHT RED from LIGHT BLUE.) Press the MUTE button again or press the VOL(ume) ▲ or ▼ button to restore sound. 10.INPUT SELECT button- Press to select TV or the external input (VIDEO1 or VIDEO2) mode. (See USING AUDIO/VIDEO INPUT JACKS.) 11.CHANNEL RETURN button- Press this button to go back to the previously viewed channel. For example, pressing the CHAN- NEL RETURN button once will change channel display from CH 3 (present chan- nel) to CH 10 (previously viewed channel), and pressing it a second time will return from CH 10 to CH 3. 12.DISPLAY button- Press to display the channel number on the screen. If you press it again, the channel number will disappear. 13.SLEEP button- Press the SLEEP button to display the sleep timer and start the func- tion. The shut off time can be determined by the number of times you press the but- ton. (0, 10, 20, 30,..90, 0 minutes) 14.GAME button- Press to set the Game mode and external input mode at the same time. To exit, press the INPUT SELECT button. (See USING AUDIO/VIDEO INPUT JACKS and PICTURE ADJUSTMENT.) 15.S-VIDEO input jack- Connect to the S- VIDEO output jack of a video camera or VCR using the S-VIDEO cable (not supplied). NOTE: The S-VIDEO jack on the rear panel is given priority over the VIDEO jack. 16.ANT(enna). IN jack- Connect to an anten- na, cable system, or satellite system. 17.AC cord- Connect to a standard AC outlet (120V/60Hz). NOTE: Unwrap the AC cord completely from the backcover before plugging the cord into an AC outlet. - REMOTE CONTROL - VIDEO VIDEO 2 L - AUDIO - R VOLUNE MENU CHANNEL POWER 1 2 3 4 5 6 7 VIDEO 1 INPUT VIDEO L R ANT.IN S-VIDEO 17 2 1 15 16 POWER 1 2 3 4 5 6 7 8 9 0 +100 DISPLAY VOL CH CH VOL SLEEP CHANNEL RETURN INPUT SELECT MUTE GAME MENU 6 8 4 3 9 12 11 10 13 5 14 INSTALLING THE BATTERIES 1) Slide the battery compartment cover back on the remote unit. 2) Insert 2 "AA" penlight batteries into battery compartment in the direction as indicated by the polarity (+ / -) markings. Batteries installed with incorrect polarity may dam- age the remote unit. 3) Replace the cover. USING AUDIO/VIDEO INPUT JACKS When you use the AUDIO/VIDEO input jacks, select “VIDEO1” or “VIDEO2” mode by pressing the INPUT SELECT button on the remote control. • To use the jacks on the back of the TV, select “VIDEO1”. • To use the jacks on the front of the TV, select “VIDEO2”. NOTES: • You may also select Game mode and Video2 at the same time by pressing the GAME but- ton on the remote control. "GAME" appears on the TV screen. The TV will switch to Video2 input on the front of the TV. (See PICTURE ADJUSTMENT.) • When you use the S-VIDEO connection, S-VIDEO jack on the rear panel is given pri- ority over the VIDEO jack. SYMBOLE D'AVERTISSEMENT POUR LES COMPOSANTES APPAREIL ET MEUBLE A ROULETTES S3126A - FRONT PANEL - - REAR PANEL - L6500UA.QX33 03.4.2 3:58 PM Page 2
PREPARATION FOR USE OPERATIONS WATCHING A TV PROGRAM 1) Press the POWER button to turn on the TV. 2) Select the desired channel with the CH(annel) ▲ or ▼ button. 3) Adjust the volume to the desired listening level using the VOL(ume) ▲ or ▼ button. 4) Adjust picture controls for a natural looking image. (See "PICTURE ADJUSTMENT".) SETTING THE SLEEP TIMER The sleep timer function allows you to have the power automatically turn off after a set time period. 1) Press the POWER button to turn on the TV and press the SLEEP button on the remote control . 2) You may change the sleep time by pressing the SLEEP button on the remote control repeatedly. The timer can be set up to 90 minutes, 10 minutes each time the SLEEP button is pushed. (The timer display counts up and sleep timer will be displayed on the screen when you press the SLEEP button on remote control.) Note: When you disconnect the unit from the AC outlet, or if you have a power failure, the sleep time will be lost. CLOSED CAPTION SELECTION SLEEP 10 To cancel the sleep timer: Press the SLEEP button repeated- ly until "SLEEP 0" is displayed. You may view specially labeled (cc) TV pro- grams, movies, news, prerecorded tapes, etc. with either a dialogue caption or text display added to the program. 1) Press the MENU button so that the menu display appears on the TV screen. 2) Press the CH(annel) ▲ or ▼ button to point to "CAPTION". 3) Press the VOL(ume) ▲ or ▼ button to select the mode you wish. 4) When done, press the MENU button to exit the menu. PICTURE CHANNEL SET [ENGLISH]ESPAÑOL V-CHIP SET UP CAPTION [OFF] TV SOUND [MAIN] PICTURE CHANNEL SET [ENGLISH]ESPAÑOL V-CHIP SET UP CAPTION [ C1] TV SOUND [MAIN] PICTURE CHANNEL SET [ENGLISH]ESPAÑOL V-CHIP SET UP CAPTION [ C2] TV SOUND [MAIN] PICTURE CHANNEL SET [ENGLISH]ESPAÑOL V-CHIP SET UP CAPTION [ T1] TV SOUND [MAIN] PICTURE CHANNEL SET [ENGLISH]ESPAÑOL V-CHIP SET UP CAPTION [ T2] TV SOUND [MAIN] : Press the VOL(ume) ▲ or ▼ button. GAME MODE Set to the most suitable position for TV GAME. [+] : ON [-] : OFF BRIGHT Adjust until the darkest parts of the picture are as bright as you prefer. [+] : increase brightness [-] : decrease brightness CONTRAST Adjust to increase or decrease contrast. [+] : increase contrast [-] : decrease contrast COLOR Adjust to be brilliant or pale color. [+] : be brilliant color [-] : be pale color TINT Adjust to obtain natural skin tones. [+] : greenish tone [-] : reddish tone SHARPNESS Adjust to detail in the picture. [+] : increase sharpness [-] : decrease sharpness Notes: ● “+” is achieved by pressing the VOL(ume) ▲ button and “-” by pressing the VOL(ume) ▼ button. ● In the above steps, the picture adjustment display will disappear from the TV screen automatically after about 10 seconds if you do not press any buttons. Press the MENU and VOL(ume) ▲ button so that "PIC- TURE" is selected. Then, press the CH(annel) ▲ or ▼ button repeatedly until the display returns to the screen. ● If you adjust any Picture control after you set the Game mode to [ON], the Game mode is set to [OFF] automatically. [USING THE GAME BUTTON] You may also set the Game mode and external input mode at the same time by pressing the GAME button on the remote control. "GAME" appears on the TV screen. In this case, connect the external source to the AUDIO/VIDEO jacks on the front panel. ● To exit the Game mode and external input mode, press the INPUT SELECT button on the remote control. ● To cancel the Game mode only, adjust the pic- ture control. In this case, "VIDEO2" instead of "GAME" appears on the TV screen. ● If you press the GAME button when the TV is off, the TV turns on and will be in the Game mode and external input mode auto- matically. PICTURE ADJUSTMENT 1) Press the MENU button so that the menu display appears on the TV screen. 2) Press the VOL(ume) ▲ button so that "PICTURE" is selected. 3) Select the feature you wish to adjust with the CH(annel) ▲ or ▼ button and adjust it with the VOL(ume) ▲ or ▼ button. [-] GAME MODE [+] OFF ON [-] BRIGHT [+] [-] CONTRAST [+] [-] COLOR [+] [-] TINT [+] [-] SHARPNESS [+] : Press the CH(annel) ▲ or ▼ button. LANGUAGE SELECTION If you want to change the language of the on-screen menu, follow the proce- dure below. 1) Connect the power cord to a standard AC outlet. Note: If some digits appear in the corner of the screen, press the POWER button without unplugging the power cord. 2) Press the POWER button to turn on the TV. 3) Press the MENU button so that the menu display appears on the TV screen. 4) Press the CH(annel) ▲ or ▼ button to point to "[ENGLISH]". 5) Select "ENGLISH" or "ESPAÑOL" = Spanish by using the VOL(ume) ▲ or ▼ button. 6) Press the MENU button to exit the menu. CHANNEL PRESETTING NOTE:You MUST PRESET channels BEFORE using CHANNEL ▲ or ▼ button. To preset a channel or to change a preset channel, follow the procedure below. 1) Press the POWER button to turn on the TV. 2) Press the MENU button so that the menu display appears on the TV screen. 3) Press the CH(annel) ▲ or ▼ button to point to "CHANNEL SET". Then, press the VOL(ume) ▲ button. 4) Press the CH(annel) ▲ or ▼ button to point to "AUTO MEMO". Then, press the VOL(ume) ▲ button. The tuner scans and memorizes all active channels in your area. ● The TV distinguishes between standard TV channels and cable (CATV) channels. ● When AUTO MEMO action is completed, the lowest memorized channel reappears on the screen. ● When you press the CH(annel) ▲ or ▼ button after selecting AUTO MEMO, the tuner will stop at the memorized channels only. ● The TV may memorize TV channels as CATV channels if the reception conditions are poor. If this happens, try the AUTO MEMO action again when reception conditions are better. [ADD/DELETE FUNCTION] 1) Press the MENU button so that the menu display appears on the TV screen. 2) Press the CH(annel) ▲ or ▼ button to point to "CHANNEL SET". Then, press the VOL(ume) ▲ button. 3) Press the VOL(ume) ▲ button so that "ADD/DELETE" is selected. 4) Use the CH(annel) ▲ or ▼ button to select the channel you wish to put into memory or to erase from memory. Note: The display will return to the normal screen automatically in about 10 seconds. Perform "ADD/DELETE" function while this display appears on the screen. ● Press the VOL(ume) ▲ or ▼ button to light up the channel number in LIGHT BLUE if you wish to add the channel into memory. ● Press the VOL(ume) ▲ or ▼ button to light up the channel number in LIGHT RED if you wish to erase the channel from memory. 5) Press the MENU button to exit the menu. MTS (Multi-Channel Television Sound) System You can listen to a program in MTS stereo by following the steps below.. RESUME FUNCTION If the power fails or is disconnected while the TV is powered on, the TV will turn on automatical- ly when the power resumes. PICTURE CHANNEL SET [ENGLISH]ESPAÑOL V-CHIP SET UP CAPTION [OFF] TV SOUND [MAIN] ADD/DELETE AUTO MEMO ADD/DELETE AUTO MEMO PICTURE CHANNEL SET [ENGLISH]ESPAÑOL V-CHIP SET UP CAPTION [OFF] TV SOUND [MAIN] PICTURE CHANNEL SET [ENGLISH]ESPAÑOL V-CHIP SET UP CAPTION [OFF] TV SOUND [MAIN] PICTURE CHANNEL SET [ENGLISH]ESPAÑOL V-CHIP SET UP CAPTION [OFF] TV SOUND [MAIN] To show the status, press the DISPLAY button on the remote control. SAP: Second Audio Program, which means your program, can also be received in a second lan- guage or sometimes a radio station. Type of broadcast Regular -None- Stereo broadcast STEREO SAP Menu Selection MAIN MONO SAP -None- -None- MONO STEREO SAP MAIN MAIN [To Select STEREO, MONO or SAP in Stereo broadcast] 1) Press the MENU button so that the menu display appears on the TV screen. 2) Press the CH(annel) ▲ or ▼ button to point to "TV SOUND". 3) Press the VOL(ume) ▲ or ▼ button to select your desired stereo mode. ([MAIN], [MONO] or [SAP]) : Press the VOL(ume) ▲ or ▼ button. Type of broadcast Regular -None- Stereo broadcast STEREO SAP Menu Selection MAIN MONO SAP -None- -None- MONO STEREO SAP MAIN MAIN PICTURE CHANNEL SET [ENGLISH]ESPAÑOL V-CHIP SET UP CAPTION [OFF] TV SOUND [MAIN] PICTURE CHANNEL SET [ENGLISH]ESPAÑOL V-CHIP SET UP CAPTION [OFF] TV SOUND [MONO] PICTURE CHANNEL SET [ENGLISH]ESPAÑOL V-CHIP SET UP CAPTION [OFF] TV SOUND [SAP] L6500UA.QX33 03.4.2 3:58 PM Page 3
GENERAL SPECIFICATIONS Television system: NTSC-M TV Standard Closed Caption System: §15.119/FCC Channel coverage VHF: 2 ~ 13 UHF: 14 ~ 69 CATV: 2 ~ 13, A ~ W, W+1 ~ W+84, A-5 ~ A-1, 5A Tuning System 181 channel frequency synthesized tuning system Channel access: Direct access keyboard, programmable scan and up/down Terminals Antenna input: VHF/UHF/CATV 75 ohm unbalanced (F-type) S-Video input: Mini DIN 4-pin jack Video input: RCA connector x 2 Audio input: RCA connector x 4 Stereo Sound System 2 speakers ELECTRICAL SPECIFICATIONS Sound output: 1W, 8 ohm x2 OTHER SPECIFICATIONS Remote control: Digital encoded infrared light system Operating temperature: 5°C to 40°C (41°F~104°F) Power requirements: AC120V, 60Hz Power consumption (Maximum): 75W Picture tube: 20" Dimensions: H : 18-3/16" (462mm) W: 19-15/16" (506mm) D : 19-27/32" (504mm) Weight: 52.9 lbs. (24kg) •Designs and specifications are subject to change without notice. •If there is a discrepancy between languages, the default language will be English. Remote control unit (NE122UD) Batteries ("AA" x 2) SPECIFICATIONS MAINTENANCE SUPPLIED ACCESSORIES TROUBLESHOOTING GUIDE Sometimes a performance problem can be easily solved by checking seemingly apparent but often over- looked possibilities. Before arranging for service, check these items. It could save you time and money. QUICK SERVICE CHECK LIST PROBLEM POSSIBLE REMEDY Try a new channel, if OK, then possible station trouble. Is TV plugged in? Power at outlet? Is TV’s POWER button on? Is antenna connected to terminal on the back of the set? If outside antenna is being used, check for broken wire. Check for local interference. Turn off with POWER button and then turn it on after about a minute. Adjust COLOR control. Adjust CONTRAST & BRIGHT control. Check batteries in Remote Control. Move the TV away from the nearby appliances or unshielded speakers which have Magnetism. Turn off using the POWER button, then turn it on again 30 minutes or so later. Remote Control Doesn’t Work Bars On Screen Picture Distorted Picture Rolls Vertically No Color Poor Reception on Some Channels Weak Picture Lines or Streaks in Picture Ghosts in picture Picture Blurred Sound OK, Picture Poor Picture OK, Sound Poor No Picture or Sound Different color marks on screen Closed Caption Problem Possible Remedy My TV is showing captions that are misspelled. My TV will not show the text in its entirety or there is a delay of what is being said. My captions are scrambled with white boxes on the TV screen. My program guide listed a TV show as being closed captioned but none of the captions were displayed. My prerecorded videotape does not show any captions. The tape box mentions it being closed captioned. My TV screen shows a black box on certain channels. You are watching a live broadcast and spelling errors made by the closed captioning production company may pass through uncorrect- ed. A prerecorded program will not show any misspelled words because of the normal time available for editing the captions. Captions that are delayed a few seconds behind the actual dialogue are common for live broadcasts. Most captioning production compa- nies can display a dialogue to a maximum of 220 words per minute. If a dialogue exceeds that rate, selective editing is used to insure that the captions remain up-to-date with the current TV screen dialogue. Interference caused by building, power lines, thunderstorms, etc. may cause scrambled or incomplete captions to appear. Broadcasters may at times use a time compression process to the actual program so that additional advertising time can be given. Since the decoder cannot read the compressed information, captions will be lost. The videotape was either an illegal copying or the tape duplicating company accidentally left out the captioning signals during the copying process. You are in the TEXT mode. Select CAPTION mode or CAPTION [OFF]. As an ENERGY STAR Partner, our company has determined that this product meets the ENERGY STAR guidelines for energy efficiency. ENERGY STAR is a U.S. registered mark. ® ® ® Owner’s Manual (0EMN02202) CABINET CLEANING ● Wipe the front panel and other exterior sur- faces of the TV with a soft cloth immersed in lukewarm water and wrung dry. ● Never use a solvent or alcohol. Do not spray liquid near the TV. Such chemicals may cause damage and discoloration to the exposed surfaces. PICTURE TUBE CLEANING Wipe the picture tube of the TV with a soft cloth. Before cleaning the picture tube, discon- nect the power cord. Owner’s Manual V-CHIP SET UP V-CHIP enables parents to prevent their children from watching inappropriate material on TV. V-CHIP reads the ratings for programming (except for news and sports programs, unedited movies on premium cable channels, and Emergency Broadcast System signals), then denies access to programming if the program's rating meets or exceeds the limitations you select. In this case, "PROTECTED PROGRAM by ..." message appears on the TV screen. To block certain ratings, follow the steps below. ● Programming may be rated by the Motion Picture Association of America (MPAA) or accord- ing to the Television Parental Guidelines. In order to block any inappropriate programming, set your limits in both places (MPAA RATING and TV RATING). ● You cannot access the menu when the "PROTECTED PROGRAM by ..." message appears. In this case, change to an unblocked channel, then press the MENU button. [MPAA RATING SET UP] 1) Press the MENU button so that the menu display appears on the TV screen. 2) Press the CH(annel) ▲ or ▼ button to point to "V-CHIP SET UP". Then, press the VOL(ume) ▲ button. 3) Press the CH(annel) ▲ or ▼ button to point to "MPAA RATING". Then, press the VOL(ume) ▲ button. 4) Press the CH(annel) ▲ or ▼ button to point to your desired item. Then, press the VOL(ume) ▲ button to select [BLOCK] or [VIEW]. ● When you select the rating category and turn it to [BLOCK], the higher rating will turn [BLOCK] automatically. Also, the lower rating will turn [VIEW] automatically. ● When you turn "G" to [BLOCK] or [VIEW], the all ratings will turn to [BLOCK] or [VIEW] automatically. ● When you turn "X" to [VIEW], then all ratings will turn to [VIEW] automatically. 5) Press the MENU button to exit the menu. PICTURE CHANNEL SET [ENGLISH] ESPAÑOL B V-CHIP SET UP CAPTION [OFF] TV SOUND [MAIN] TV RATING B MPAA RATING B G [VIEW] PG [VIEW] PG-13 [VIEW] R [VIEW] NC-17 [VIEW] X [VIEW] <Selection> <Rating Category Explanations> • G: General Audience • PG: Parental Guidance suggested. • PG-13: Unsuitable for children under 13 • R: Restricted; under 17 requires accompanying parent or adult guardian • NC-17: No one under 17 admitted • X: Mature audience only [TV RATING SET UP] 1) Press the MENU button so that the menu display appears on the TV screen. 2) Press the CH(annel) ▲ or ▼ button to point to "V-CHIP SET UP". Then, press the VOL(ume) ▲ button. 3) Press the CH(annel) ▲ or ▼ button to point to "TV RATING". Then, press the VOL(ume) ▲ button. 4) Press the CH(annel) ▲ or ▼ button to point to your desired item. Then, press the VOL(ume) ▲ button to select [BLOCK] or [VIEW]. ● When you select the rating category and turn it to [BLOCK], the higher rating will turn [BLOCK] automatically. Also, the lower rating will turn [VIEW] automatically. ● When you turn "TV-Y" to [BLOCK] or [VIEW], then all ratings will turn to [BLOCK] or [VIEW] automatically. ● When you turn "TV-MA" to [VIEW], then all ratings will turn to [VIEW] automatically. When you select TV-Y7, TV-PG, TV-14, or TV-MA and you press the VOL(ume) ▲ button, the sub-ratings will appear on the TV screen. If you select the rating category (example: TV-PG) and turn it to [BLOCK] or [VIEW], the sub- ratings (example: V for Violence) will turn [BLOCK] or [VIEW] automatically. You can set the sub-ratings to [BLOCK] or [VIEW] individually when the rating category is set to [BLOCK]. To set the sub-ratings individually, follow the steps below. ● When you select [TV-Y7]: Press the CH(annel) ▲ or ▼ button to select "FV" (Fantasy Violence). Then, press the VOL(ume) ▲ button to select [BLOCK] or [VIEW]. ● When you select [TV-PG], [TV-14] or [TV-MA]: Press the CH(annel) ▲ or ▼ button to select "D" (Suggestive Dialog), "L"(Coarse Language), "S"(Sexual Situation), or "V" (Violence). Then, press the VOL(ume) ▲ button to select [BLOCK] or [VIEW]. Notes: ● When you select [TV-MA], "D" does not appear on the TV screen. ● The sub-ratings which set to [BLOCK] appear next to the rating category in the TV RATING menu. 5) Press the MENU button to exit the menu. B TV RATING MPAA RATING B TV-Y [VIEW] TV-Y7( ) [VIEW] TV-G [VIEW] TV-PG( ) [VIEW] TV-14( ) [VIEW] TV-MA( ) [VIEW] <Selection> <Rating Category Explanations> • TV-Y: Appropriate for all children • TV-Y7: Appropriate for children seven and older • TV-G: General Audience • TV-PG: Parental Guidance suggested. • TV-14: Unsuitable for children under 14 • TV-MA: Mature audience only TV-Y7 [BLOCK] B FV [BLOCK] B TV-Y [VIEW] TV-Y7( ) [VIEW] TV-G [BLOCK] TV-PG(DLSV) [BLOCK] TV-14 (DLSV) [BLOCK] TV-MA( LSV) [BLOCK] TV-PG [BLOCK] B D [BLOCK] L [BLOCK] S [BLOCK] V [BLOCK] PICTURE CHANNEL SET [ENGLISH] ESPAÑOL B V-CHIP SET UP CAPTION [OFF] TV SOUND [MAIN] L6500UA.QX33 03.4.2 3:58 PM Page 4
Have a question about the Sylvania 6420FD but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Sylvania 6420FD. Please make sure that you describe your difficulty with the Sylvania 6420FD as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.