Stiga Combi 48 SQ H manual

Select a language NL 100%

View a manual of the Stiga Combi 48 SQ H below. All manuals on can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Stiga
  • Product: Lawnmower
  • Model/name: Combi 48 SQ H
  • Filetype: PDF
  • Available languages: , , , , , , , , , , , ,

Table of Contents

Page: 3
kW /min
- s/n
8 1
6 4
Page: 8
Page: 75
EN - 1
Keep safe for future necessity.
1. GENERAL INFORMATION........................................... 1
2. SAFETY REGULATIONS.............................................. 1
3. GETTING TO KNOW THE MACHINE........................... 3
4. ASSEMBLY.................................................................... 4
5. CONTROLS................................................................... 4
6. USING THE MACHINE.................................................. 4
7. MAINTENANCE............................................................ 5
8. STORAGE..................................................................... 6
9. HANDLING AND TRANSPORTATION......................... 6
12. ATTACHMENTS ON REQUEST................................... 7
Some paragraphs in the manual contain important informa-
tion regarding safety and operation and are emphasised in
this manner:
NOTE OR IMPORTANT these give details or further
information on what has already been said, and aim to prevent
damage to the machine.
This symbol highlights danger. Failure to observe the
warning can lead to possible personal and/or third party injury
and/or damage.
The paragraphs highlighted in a square with grey
spots indicate the optional characteristics not on
all models documented in this manual. Check if
the characteristics are available on this model.
Whenever reference is made to a position on the machine
"front", "back", "left" or "right" hand side, this refers to the opera-
tor's driving position.
1.2.1 Figures
The figures in these instructions for use are numbered 1, 2,
3, etc.
The components indicated in the figures are identified with
letters A, B, C, and so on.
Reference to component C in figure 2 is indicated with the
wording: “See fig. 2.C” or simply “(Fig. 2.C)”.
The figures are given as a guide only. The actual pieces can
differ from those illustrated in this document.
1.2.2 Titles
The manual is divided into chapters and paragraphs. The
title of paragraph “2.1 Training” is a sub-title of “2.
Safety regulations”. References to titles or paragraphs are
marked with the abbreviation chap. or par. and the relevant
number. Example: “chap. 2” or “par. 2.1"
Become acquainted with the controls and the proper
use of the machine. Learn how to stop the motor quickly.
Failure to follow the warnings and instructions may re-
sult in fire and/or serious injury.
• Never allow children or persons unfamiliar with these
instructions to use the machine. Local laws may establish
a minimum age for users.
• Never use the machine if the user is tired or unwell, or has
taken medicine, drugs, alcohol or any substances which
may slow their reflexes and compromise his judgement.
• Do not allow children or other passengers to ride on the
• Bear in mind that the operator or user is responsible
for accidents or unexpected events occurring to other
people or their property. It is the user’s responsibility to
assess the potential risk of the area where work is to be
carried out and to take all the necessary precautions to
ensure his own safety and that of others, particularly on
slopes or rough, slippery and unstable ground.
• If the machine is sold or lent to others, make sure that the op-
erator reads the user instructions contained in this manual.
Personal Protective Equipment (PPE)
• Always wear suitable work attire, hard-wearing safety
footwear with non-slip soles and long trousers. Do not
operate the machine barefoot or wearing open sandals.
Wear hearing protection devices.
• Use of hearing protections can reduce the ability to hear
any warnings (shouting or alarms). Be careful of what
occurs around you in the work area.
• Wear protective gloves whenever your hands are at risk.
• Never wear scarves, shirts, necklaces, bracelets, loose
flowing clothing, laces or ties or any hanging or flapping
accessory that could catch in the machine or in any ob-
jects or materials in the work area.
• Tie your hair back if it is long.
Work area/Machine
• Thoroughly inspect the entire work area and remove any-
thing that could be thrown by the machine or damage the
cutting means/rotating units (stones, branches, iron wire,
bones, etc.).
Internal combustion engine: fuel
DANGER! The fuel is highly flammable.
• Keep the fuel in approved containers, in a safe place,
away from any naked lights or heat sources.
• Keep the containers free of residues of grass, leaves or
excessive grease.
• Keep the containers out of the reach of children.
• Do not smoke when filling up with fuel or when handling
the fuel.
• Use a funnel to top up with fuel only in the open air.
• Do not inhale fuel fumes.
• Never remove the tank cap or add fuel while the engine is
running or when the engine is hot.
• Open the fuel tank slowly to allow the pressure inside to
decrease gradually.
• Do not approach the tank opening with a naked flame to
check its contents.
• In case of fuel leakages, do not attempt to start the engine
but move the machine away from the area of spillage and
avoid creating any source of ignition until the fuel has
evaporated and fuel vapours have dissipated.
• Immediately clean up all traces of fuel spilt on the machine
or on the ground.
Page: 76
EN - 2
• Replace caps of all fuel tanks and containers securely.
• Never start the machine in the same place in which you
refilled it with fuel; the engine must be started in an area at
least 3 metres from where you refuelled.
• Avoid getting any fuel or your clothing and, if this should
happen, change your clothes before starting the engine.
Work Area
• Do not operate the engine in confined spaces where danger-
ous carbon monoxide fumes can collect. The start-up op-
erations must be carried out outdoors or in a well-ventilated
area. Always remember that the exhaust gases are toxic.
• When starting up the machine, do not direct the silencer and
therefore the exhaust fumes towards flammable materials.
• Do not use the machine in environments at risk of explosion,
in the presence of flammable liquids, gas or powder. Power
tools create sparks which may ignite the dust or fumes.
• Work only in daylight or with good artificial light in good visi-
bility conditions.
• Keep persons, children and animals away from the working
area. Children must be supervised by another adult.
• Avoid working with wet grass, in the rain and when there is a
risk of a thunderstorm, especially lightening.
• Pay careful attention to uneven ground (hills, dips), slopes,
hidden hazards and obstacles that could limit visibility.
• Be very careful near ravines, ditches or embankments. The
machine could overturn if a wheel slides over the edge or if
the earth gives way.
• Always mow across a slope and never up and down it, being
very careful when changing direction, making sure you have
firm footage and that the wheels do not hit any obstacles
(such as stones, branches, roots, etc.) that may cause the
machine to slide sideways or make you lose control of it.
• Look out for traffic when using the machine near the road.
• To avoid the risk of fire, do not leave the machine with the en-
gine hot on leaves or dry grass or other flammable material.
• Exercise caution when reversing or moving backwards.
Look behind you to make sure there are no obstacles
before and during operations in reverse gear.
• Never run, always walk.
• Do not allow the lawnmower to pull you along.
• Always keep hands and feet away from the cutting means,
when starting and when using the machine.
• Attention: the cutting means will continue to rotate for
a few seconds after disengagement or after you have
switched off the motor.
• Keep away from the discharge opening.
• Do not touch the parts of the engine that heat up during
operation. Risk of burns.
If something breaks or an accident occurs during
mowing, turn off the motor immediately and move the
machine away to prevent further damage; if an accident
occurs with injuries or third parties are injured, carry
out the first aid measures most suitable for the situation
immediately and contact the medical authorities for
any necessary health care. Carefully remove any debris
which could cause damage or injury to persons or ani-
mals if ignored.
Use limitations
• Never operate the machine with guards damaged, missing
or incorrectly assembled (grass catcher, side discharge
guards, rear discharge guards).
• Don’t use the machine if the attachments/tools are not
installed in their seats.
• Never disengage, deactivate, remove or tamper with the
safety systems/micro switches installed.
• Do not change the engine adjustments, or exceed the max-
imum rpm. If the engine is forced to run at an excessive
speed, the risk of personal injury increases.
• Do not strain the machine too much and do not use a small
machine for heavy-duty work; if you use the right machine,
you will reduce the risk of hazards and improve the quality
of your work.
Ensure regular maintenance and correct storage to main-
tain machine safety and high performance levels.
• Never use the machine with worn or damaged parts.
Faulty or worn-out parts must always be replaced and
never repaired.
• To reduce the risk of fire, check for oil and/or fuel leaks on
a regular basis.
• Be careful during adjustment of the machine to prevent
entrapment of the fingers between moving parts of the
cutting means and fixed parts of the machine.
The noise and vibration levels shown in these
instructions are the maximum levels for use of the ma-
chine. The use of an unbalanced cutting element, the
excessive speed of movement, or the absence of main-
tenance have a significant influence on noise emissions
and vibrations. Consequently, it is necessary to take
preventive steps to eliminate possible damage due to
high levels of noise and stress from vibration; Maintain
the machine well, wear ear protection devices, and take
breaks while working.
• Do not store the machine with fuel in the tank in an area
where fuel vapours could reach a naked light, a spark or
a strong heat source.
• To reduce fire risks, do not leave containers with debris
inside a room.
Safeguarding the environment must be a relevant and prior-
ity aspect of machine use, of benefit to the community and
the environment we live in.
• Avoid being a disturbance to the neighbourhood. Use this
machine at reasonable times of the day only (not early
morning or late evening when the noise could cause
• Comply with local regulations for the disposal of pack-
aging, deteriorated parts or any elements with a strong
environmental impact; this waste must not be disposed
of with regular waste, but must be separated and taken to
collection centres, who will recycle the materials.
• Comply with local regulations for the disposal of waste
• When the machine is withdrawn from service, do not
dispose of it in the environment, but take it to a waste
disposal facility in accordance with the local regulations
in force.
This machine is pedestrian-controlled lawnmower.
The machine is essentially composed of a motor which
drives a cutting means enclosed in a casing, equipped with
wheels and a handle.
Page: 77
EN - 3
The operator is able to operate the machine and use the
main controls, always staying behind the handle at a safe
distance from the rotating cutting means.
If the operator leaves the machine, the motor and cutting
means will stop within a few seconds.
Intended use
This machine is designed and built to cut (and collect) grass
in gardens and grassy areas, with a height according to its
cutting capacity, driven by an operator walking behind it.
Generally speaking this machine can:
1. Mow the grass and collect it in the grass catcher bag.
2. Mow the grass and discharge it on the ground through
the rear part (if available).
3. Mow the grass and discharge it on the ground laterally
(if available).
4. Mow the grass, chop it and discharge it on the ground
(mulching effect - if available).
The use of special attachments provided for by the Manu-
facturer as original equipment or which may be purchased
separately, allows this work to be done in various operating
modes, illustrated in this manual or the instructions that
accompany the single attachments.
3.1.1 Improper use
Any other usage, different than the afore-mentioned may be
hazardous and harm persons and/or damage things.
Examples of improper use may include, but are not limited to:
• Allowing children, animals or other passengers on the
machine as they could fall off and injure themselves or
compromise safe driving by the operator;
• Letting oneself be transported by the machine;
• Using the machine to tow or push loads;
• Using the cutting means on surfaces other than grass;
• Using the machine for leaf or debris collection;
• Using the machine to trim hedges, or for cutting vegeta-
tion other than grass;
• using of the machine by more than one person.
IMPORTANT Improper use of the machine will in-
validate the warranty, relieve the Manufacturer from all
liabilities, and the user will consequently be liable for all
and any damage or injury to himself or others.
3.1.2 User types
This machine is intended for use by consumers, i.e.
non-professional operators.
It is intended for "DIY" use only.
IMPORTANT The machine must be used by one
The machine has various symbols on it (Fig.2.0). Their func-
tion is to remind the operator of the correct conduct for use,
with due care and caution. Meanings of the symbols:
Warning. Read the instructions before
operating the machine
Warning!Do not put hands or feet inside
the compartment of the cutting means.
Remove the spark plug cap and read the
instructions before carrying out any main-
tenance or repair work.
Danger! Risk of thrown objects. Keep all
persons away from the work area whilst
Danger! Danger of cutting. Cutting
means in motion. Do not put hands or in-
side the housing of the cutting means.
IMPORTANT Any damaged or illegible decals must
be replaced. Order replacement decals from an Author-
ised Service Centre.
The identification label holds the following data (Fig.1.0).
1. Sound power level.
2. CE conformity marking.
3. Year of manufacture.
4. Type of machine.
5. Serial number.
6. Name and address of Manufacturer.
7. Article code.
8. Nominal power and maximum operating engine speed.
9. Weight in kg.
Write the identification data of the machine in the specific
space on the label on the back of the cover page.
IMPORTANT Quote the information on the product
identification label whenever you contact an Authorised
Service Centre.
IMPORTANT The example of the Declaration of Con-
formity is provided on the last pages of the manual.
A. Chassis.
B. Engine.
C. Cutting means.
D. Rear discharge guard.
E. Side discharge guard (if equipped).
F. Side discharge chute (if equipped).
G. Grass catcher.
H. Handle.
I. Engine brake lever / cutting means.
J. Drive engagement lever.
Strictly observe the indications and the safety regu-
lations described in chap. 2..
Certain components of the machine are not installed in the
factory and have to be assembled after unpacking, follow-
ing the instructions below.
Unpacking and completing the assembly should be
done on a flat and stable surface, with enough space for
moving the machine and its packaging.. Do not use the
machine until all the instructions provided in the “AS-
SEMBLY” section have been carried out.
4.1 UNPACKING (Fig.3.0)
1. Remove all the unassembled parts from the box.
2. Take out the machine and dispose of the box and
packaging in compliance with local regulations.
• Models with push-button electric start:
refer to the owner's manual of the engine.
Page: 78
EN - 4
MAND (Fig.8.B)
5.4 DRIVE ON LEVER (Fig.9.B)
IMPORTANT The engine must be started only with
the drive OFF.
IMPORTANT Avoid moving the machine backwards
when the drive is ON.
Do this when the cutting means is stationary.
• Adjustment (See Fig.10.A)
IMPORTANT For instructions on the engine and the bat-
tery (if equipped), refer to the corresponding manuals.
Place the machine in a stable horizontal position on the
6.1.1 Filling with oil and fuel
IMPORTANT The machine is supplied without engine oil
and without fuel.
Before using the machine for the first time after purchase,
fill with fuel and top up the oil tank following the instructions
and precautions provided in the engine instruction  manual
and in par. 7.2.1/7.2.2.
Before each use
Check the fuel and oil levels following the instructions provi-
ded in the engine manual and par. 7.2.1/7.2.2.
6.1.2 Preparing the machine before starting work
NOTE This machine can be used to mow lawns in vari-
ous ways;
a. Preparation for grass cutting and collection in
the grass catcher:
1. For side discharge models: make sure that the
guard (Fig. 11.A) is lowered and locked by the
safety lever (Fig. 11.B).
2. Insert the grass catcher (Fig.11.C).
b. Preparation for grass cutting and rear grass
discharge on the ground:
1. Lift the rear discharge guard (Fig.12.A) and fit the pin
2. For models with side discharge: make sure that the
guard (Fig. 12.C) is lowered and locked by the safety
lever (Fig. 12.D).
To remove the pin: see Fig.12.A/B.
c. Preparation for grass mowing and chopping
(mulching function):
Lift the rear discharge guard (Fig.13.A) and insert the
chute plug (Fig.13.B) in the discharge opening.For models
with side discharge: make sure that the side discharge
guard (Fig. 13.C/D) is lowered and locked by the safety
lever (Fig. 13.D).
To remove the chute plug: see Fig.13.E.
d. Preparation for grass cutting and side
discharge on the ground:
1. Lift the rear discharge guard (Fig.14.A) and insert the
chute plug (Fig.14.B) in the discharge opening.
2. Slightly push the safety lever (Fig.14.C) and lift the
side discharge guard (Fig.14.D).
3. Insert the side discharge chute (Fig.14.E).
4. Close the side discharge guard (Fig.14.D) so as to
lock the side discharge chute (Fig.14.E).
To remove the side discharge chute:
5. Slightly push the safety lever (Fig.14.C) and lift the
side discharge guard (Fig.14.D).
6. Release the side discharge chute (Fig.14.E).
6.1.3 Handle inclination adjustment (Fig.15/16)
Do this when the cutting means is stationary.
Always carry out the safety checks before use.
6.2.1 Safety check before every use
• Check the integrity and the correct mounting
of all components of the machine;
• make sure that all fastening devices are correctly tightened;
• keep all surfaces of the machine clean and dry.
6.2.2 Machine operating test
Action Result
1. Start the machine
(par. 6.3).
2. Release the engine
brake lever / cutting
1. The cutting means
should move.
2. The levers should
return automatically
and rapidly to the
neutral position, the
motor must switch off
and the cutting means
must stop within a few
Page: 79
EN - 5
1. Start the machine
(par. 6.3).
2. Operate the drive
3. Disengage the drive
2. The wheels should
move the machine
3. The wheels should
stop and the machine
stops moving forward.
Test driving No abnormal vibrations.
No abnormal sound.
If any of the results fail to match the indications
provided in the tables, do not use the machine! Contact
an Authorised Service Centre to have it checked and
repaired if necessary.
NOTE Start up the machine on a flat surface without ob-
stacles or high grass.
6.3.1 Models with manual start handgrip
NOTE The engine brake lever / cutting means must be
kept pulled to prevent the engine stop.
6.3.2 Models with push-button electric start
command (Fig.18.A/B/C/D)
NOTE The engine brake / cutting means lever must be
kept pulled to prevent the engine stop.
IMPORTANT When working, always keep a safe dis-
tance from the cutting means, given by the length of the
6.4.1 Grass cutting
1. Start moving forward and mowing the grass area.
2. Adjust the speed and cutting height (par. 5.5) in relation
to lawn conditions (grass height, density and humidity)
and the amount of grass to be cut.
3. It is recommended to always cut at the same height
and in the two directions (Fig.20).
For mulching or rear grass discharge:
• Never cut more than one third of the total grass height
per single pass (Fig.19).
• Keep the chassis clean (par. 7.4.2).
For side discharge: avoid discharging the cut grass
from the side of the lawn yet to be mown.
6.4.2 Grass catcher emptying
For grass catcher with contents indicator device:
Lifted = empty. Lowered = full*.
that the grass catcher is full and must be emptied.
To remove and empty the grass catcher:
1. Wait until the cutting means stops (Fig.21.A);
2. remove the grass catcher (Fig.21.B/C/D).
6.5 STOP (Fig.22.A)
After having stopped the machine, it will take a few
seconds for the cutting means to stop.
Do not touch the engine after stopping it. Risk of
IMPORTANT Always stop the machine.
• When moving between work areas.
• When driving on grass free surfaces.
• Close to an obstacle.
• Before adjusting the cutting height.
• Any time the grass catcher is removed or refitted.
• Any time the side discharge chute (if available) is re-
moved or refitted.
6.6 AFTER USE (Fig.23.A/B/C/D)
1. Clean (par. 7.4).
2. If necessary, replace damaged components and tight-
en any slack screws and bolts.
IMPORTANT Any time the machine is inactive or unat-
• Remove the spark plug cap (for models with manual start
• Press the tab and remove the permission key (for models
with push-button electric start) (Fig.23.D).
The safety regulations to follow are described in
chap. 2. Strictly comply with these instructions to avoid
serious risks or hazards:
Before commencing any inspections, cleaning or
maintenance/adjustments on the machine:
• Stop the machine.
• Make sure that any moving component has stopped.
• Wait until the engine cools down.
• Remove the spark plug cap (Fig. 23.B).
• Remove the key (Fig.23.D) (for models with
push-button electric start).
• Read the relevant instructions.
• Use suitable clothing, protective gloves and gog-
• The frequency and types of maintenance are summarised
in the "Maintenance Table" (chapter 10).
IMPORTANT Any maintenance and adjustment opera-
tions not described in this manual must be carried out by
your Authorised Service Centre.
7.2.1 Refuelling
Place the machine in a stable horizontal position on the
Refuelling must be performed with the machine
stopped and with the spark plug cap removed.
Refuel according to the methods and cautionary measures
indicated in the owner's manual of the engine.
Page: 80
EN - 6
Machines with vertical storage possibility (chap.
8.1) have a tank that contains a fuel level indicator. Do
not fill the tank above this level indicator (Fig.24.A).
IMPORTANT Clean any trace of leaked fuel. The warran-
ty does not cover damages caused by the fuel to the plastic
NOTE Fuel is perishable and should not remain in the
tank for more than 30 days.
7.2.2 Check/top-up engine oil
Check/top-up the engine oil according to the methods and
cautionary measures indicated in the owner's manual of
the engine.
For a correct operation of the machine, regularly replace
the engine oil, according to the indications in the owner's
manual of the engine.
Make sure to have restored the oil level before using the
machine again.
7.3.1 Cutting means
All operations concerning cutting means (disas-
sembly, sharpening, balancing, repair, reassembly and
/ or replacement) must be performed at an Authorised
Service Centre.
Make sure damaged, misshapen or worn cutting
means are replaced, together with the securing screws
to preserve balance.
IMPORTANT Always use original cutting means bearing the
code indicated in the “Technical Data” table.
Clean thoroughly following the instructions below every
time it is used.
7.4.1 Cleaning the machine
• Always make sure the air intakes are free of debris.
• Do not use aggressive liquids to clean the chassis.
• To reduce the risk of fire, keep the engine free of grass,
leaves residues or excessive grease.
• Wash the machine with water after each cutting work.
7.4.2 Cleaning the cutting means assembly
• Remove grass debris and mud accumulated inside the
Models without washing connection
• To access the lower part, tilt the machine from the side
indicated in the engine's manual, following the relative in-
structions, making sure that the machine is stable before
carrying out any intervention.
For side discharge: remove the discharge chute (if
mounted - par. 6.1.2d.).
To wash the internal part of the cutting means assembly,
proceed as follows (Fig.25.A/B/C):
1. always stay behind the handle of the lawn mower;
2. start the engine.
If the painting of the internal side of the chassis comes
off, take immediate action, by retouching the painting with
anti-rust paint.
7.4.3 Cleaning the grass catcher (Fig.26.A/B)
Clean the grass catcher and leave it to dry.
The battery is supplied for the models with push-button
electric start. For instructions regarding the battery
life, recharging, storage and maintenance, follow the
instructions in the instructions manual of the engine.
When the machine is to be stored away:
1. Start the engine outdoors and leave it running at idle
until it stops in order to consume all the fuel left in the
2. clean the machine thoroughly (par. 7.4);
3. check the integrity of the machine;
4. store the machine:
• in a dry place;
• protected from inclement weather;
• in a place out of children's reach;
• making sure that keys or tools used for maintenance
are removed.
If necessary, some models (see the Technical Data Ta-
ble) can be stored vertically (Fig.27).
Do not store the machine upright with the tank filled
above the lowest mark of the fuel level indicator (Fig.24.A).
Proceed as follows:
1. Remove the spark plug cap (Fig.23.B) or remove the key
(Fig.23.D) or the battery (for models with push-button elec-
tric start command).
2. Move the cutting height to the second lower position
(see chapter 5.5);
3. Carefully fold the handle in closed position and tighten
the levers (Fig.27);
4. Put the machine in vertical position and carefully fold
the handle in closed position and tighten the levers
Store the machine so as to avoid risk in the event of
accidental contact with people, children or animals.
Do not attempt to store in vertical position machines
that have not been designed for this purpose.
Page: 81
EN - 7
Whenever the machine is to be handled, raised, transported
or tilted you must:
• Stop the machine (par.6.5) until the moving parts come to a
complete halt.
• Remove the spark plug cap (Fig.23.B) or remove the key
(Fig.23.D) or the battery (for models with push-button elec-
tric start command).
• Wear heavy work gloves.
• Hold the machine in the points offering a safe grip, taking
into account the weight and its division.
• Use an appropriate number of people for the weight of the
machine and the characteristics of the vehicle or the place
where it must be placed or collected.
• Make sure that machine movements do not cause damage
or injuries.
When transporting the machine on a vehicle or trailer, always:
• Use an access ramp of suitable strength, width and length.
• Load the machine with the motor switched off and pushed by
an adequate number of people.
• Lower the cutting means assembly (par 5.5).
• Position it so that it cannot cause a hazard for anybody.
• Fasten firmly to the device of transport using ropes or chains
to prevent it from tipping over causing damage and fuel
Do not transport machines that can be stored in
vertically in such an upright position.
Intervention Frequency Notes
Check all fasteners ; Safety checks/check controls; Check the rear/lateral discharge
guards; Check the grass catcher bag and lateral discharge chute; Check the cutting
Before use par. 6.2.2
General cleaning and inspection; Checking for any damage to the machine.
If necessary, contact the authorised service centre.
After each use par. 7.4
Replacing the cutting means - par. 7.3.1 ***
Checking/topping up fuel level; Check/top-up engine oil Before use par. 6.1.1 / 7.2.1 * / 7.2.2 *
Air filter check and cleaning; Spark plug contacts check and cleaning;
Spark plug replacement; Charging the battery
* * / par. 7.5 *
* Refer to the engine manual.    *** Operation to be performed at the first signs of any malfunction
*** The operation must be carried out by your Dealer or a Authorised Service Centre
Page: 82
EN - 8
If problems persist after having performed the above operations, contact your dealer.
1. The engine
does not start,
does not
keep running,
irregularly or
stops during
Incorrect starting procedure Follow the instructions (see chap. 6.3).
No oil or fuel in the engine. Check the oil and fuel levels (see chap. 7.2.1 / 7.2.2).
Dirty spark plug or incorrect electrode
Check the spark plug (refer to the engine manual).
Clogged air filter. Clean and / or replace the filter (Refer to the engine manual).
Carburation fault. Contact your Authorised Service Centre
The floating device may be blocked. Refer to the engine manual and contact an Authorised Service
2. Engine flood-
The manual start handgrip has been
operated repeatedly with the starter
Refer to the engine manual.
The manual start handgrip has been
operated repeatedly with the spark plug
cap removed.
Insert the spark plug cap and try to start the engine.
(Refer to the engine manual).
3. The cut grass
is no longer
collected in
the grass
The cutting means hit a foreign object. Stop the engine and remove the spark plug cap. Check for any
damage and contact an authorised service centre (section 7.3.1).
The inner part of the chassis is soiled. Clean the internal part of the chassis (par. 7.4.2).
4. Mowing is
The cutting means is not in good con-
Contact the Authorised Service Centre for the sharpening or re-
placement of the cutting means.
5. Excessive
noise and/
or vibration is
whilst work-
Damaged or loose parts
The pin on the cutting means is out of
its seat.
Stop the machine and disconnect the spark plug cable (Fig. 23.B).
Check for any damage or loose parts.
All checks, replacements or repairs should be carried out by your
authorised service centre.
Cutting means fittings are loose or the
cutting means is damaged.
Stop the engine and remove the spark plug cap (Fig.23.B).
Contact an authorised service centre (section 7.3.1).
12.1 MULCHING KIT (Fig.28)
Finely chops the cut grass and leaves it on the lawn.

Question & answers

There are no questions about the Stiga Combi 48 SQ H yet.

Ask a question about the Stiga Combi 48 SQ H

Have a question about the Stiga Combi 48 SQ H but cannot find the answer in the user manual? Perhaps the users of can help you answer your question. By filling in the form below, your question will appear below the manual of the Stiga Combi 48 SQ H. Please make sure that you describe your difficulty with the Stiga Combi 48 SQ H as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.