Steelseries Arctis 7+ manual

PRODUCT INFORMATION GUIDE ARCTIS 7P+ WIRELESS

2 CONTENTS WELCOME TO ARCTIS Your new headset is the result of our unyielding pursuit of perfection since 2001. We poured our hearts into creating the best possible PlayStation gaming headset by pushing the boundaries of sound quality, mic clarity, comfort and style. Arctis is our glory; now go chase yours. Product overview5–6 Setup7 Charging9 Power On/Off10 Pairing11 Microphone12 Multimedia Control13 Ski Goggle Headband14 Translations Español15 简体中文17 繁體中文19 日本語21 한국어23 Deutsch25 Русский27 Français29 Italiano31 Português33 Polski35 Regulatory39

STEELSERIES GG 3 4 PACKAGE CONTENTS Product Information Guide Artcis 7P+ Wireless Headset USB-C Wireless Dongle USB-C to USB-A Adapter Cable 4-pole 3.5mm Audio Cable USB-C Charging Cable SYSTEM COMPATIBILITY PlayStation 5 PlayStation 4 PC Nintendo Switch Android (with USB-C) Find help at support.steelseries.com Download SteelSeries GG to customize your audio settings and to integrate with Engine Apps like Discord: steelseries.com/gg STEELSERIES GG

1 2 3 4 5 9 6 7 10 8 11 12 13 14 5 6 PRODUCT OVERVIEW *Find accessories at steelseries.com/gaming-accessories 1 Ski Goggle Headband* 2 Airweave Ear Cushions* 3 Retractable Microphone 4 Microphone Mute Button 5 Volume Control 6 Mobile Cable Jack 7 Headphone Share Jack 8 USB-C Charging Jack 9 Sidetone Dial 10 Power Button 11 USB-C Wireless Dongle 12 USB-C to USB-A Adapter Cable 13 USB-C Charging Cable 14 4-pole 3.5mm Audio Cable*

PlayStation 5 PlayStation 4 Windows Switch (TV-Mode) Switch (Handheld-Mode) Android 2.4 GHz 11 2.4 GHz 11 12 Switch (Handheld-Mode) Android 14 7 8 SETUP More detailed product information at steelseries.com/arctis-7p+ PS5 SETTING > SOUND > AUDIO OUTPUT Output to Headphones All Audio PS5 SETTING > SOUND > VOLUME Headphones Set to Max PS4 SETTING > DEVICES > AUDIO DEVICES Output to Headphones All Audio WIRELESS SETUP Connection to USB-A WIRED SETUP Connection to USB-C

13 1s ON OFF 9 10 POWER ON/OFF To power on the headset, press and hold the Power Button 10 for 1 second. You will hear a tone, and the Power Button 10 will illuminate. To power off the headset, press and hold the Power Button 10 for at least 3 seconds. CHARGING To charge the headset, connect the USB-C Charging Cable 13 to the USB-C Charging Jack 8 on the headset, and plug the other end into any USB power source. The color of the Power Button 10 indicates the battery level. Green 100–50% Yellow 49–20% Red 19–10% Red (fast blink) 9–1%

Windows 11 12 13 9 11 12 Position the ClearCast Microphone 3 close to the corner of your mouth with the flat surface facing you. SIDETONE DIAL The Sidetone Dial 9 can be used to adjust mic monitoring levels. Increase the sidetone level by moving the dial upwards, decrease or disable sidetone by moving the dial downwards. top view front view MICROPHONE PAIRING Note: The headset is already paired with the Dongle out of the box. To re-pair the Dongle: 1 Connect the USB-C Wireless Dongle 11 to a Windows PC with SteelSeries GG installed. 2 Use the USB-C Charging Cable 13 to connect the headset to the same PC. RETRACTABLE MICROPHONE POSITIONING 3 Use Engine from SteelSeries GG software to initiate the pairing. 4 Engine will show when pairing is completed.

10 13 14 SKI GOGGLE HEADBAND Install Direction of headband installation. Velcro Tighten or loosen the Velcro straps on the side of the headband to achieve the desired fit. MULTIMEDIA CONTROL Answer/end voice call single · press Power Button 10 Play/pause music single · press Power Button 10 Next track double · · press Power Button 10 Previous track triple · · · press Power Button 10

39 40 REGULATORY Europe – EU Declaration of Conformity Hereby, SteelSeries ApS. declares that the equipment which is compliance with directive RoHS 2.0 (2015/863/EU), R.E.D (2014/53/EU), EMC Directive (2014/30/EU), and LVD (2014/35/EU) which are issued by the Commission of the European Community. The full text of the EU declaration of conformity is available at the following internet address: https://steelseries.com/ Operating Temperature: 0 to + 40 °C SteelSeries ApS. hereby confirms, to date, based on the feedback from our suppliers indicates that our products shipping to the EU territory comply with REACH (Registration, Evaluation, Authorization, and Restriction of Chemicals - (EC) 1907/2006) compliance program. We are fully committed to offering REACH compliance on the products and posting accurate REACH compliance status for the all of products. Frequency bands and Powers (Headset and Transceiver) a. Frequency band(s) in which the radio equipment operates: 2.400 - 2.4835 GHz b. Maximum radio-frequency power transmitted in the frequency band(s) in which the radio equipment operates: •EIRP: л/4-DQPSK: 7.78 dBm (Headset ANT 1) •EIRP: л/4-DQPSK: 9.57 dBm (Headset ANT 2) •EIRP: л/4-DQPSK: 9.32 dBm (Transceiver) c. Firmware Version: T1.00.05 UK Declaration of Conformity Hereby, SteelSeries ApS. declares that the following equipment which is compliance with Electromagnetic Compat- ibility Regulations 2016, Electrical Equipment (Safety) Regulations 2016, Radio Equipment Regulations 2017 and The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 issued by the Department for Business, Energy& Industrial Strategy. The full text of the UK declaration of conformity is available at the following internet address: https://steelseries.com/ WEEE This product must not be disposed of with your other household waste or treat them in compliance with the local regulations or contact your local city office, your household waste disposal service or the shop where you purchased the product. TURKEY ROHS COMPLIANCE Republic of Turkey: In conformity with the EEE Regulation Türkiye Cumhuriyeti: EEE Yönetmeliğine Uygundur Safety Guideline for Lithium Battery This battery must not be disposed of with your other household waste or treat them in compliance with the local regulations or contact your local city office, your household waste disposal service or the shop where you purchased the product. Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement: The device has been evaluated to meet general RF exposure requirement, the device can be used in portable exposure condition without restriction. FCC ID: ZHK-HS33 (Wireless Headset) FCC ID: ZHK-HS33TXQ/ ZHK-HS33TXB(Transceiver) Frequency bands and Powers (Mouse and Transceiver) a. Frequency band(s) in which the radio equipment operates: 2.400 - 2.4835 GHz b. Maximum radio-frequency power transmitted in the frequency band(s) in which the radio equipment operates: • Conducted Peak Power/ л/4-DQPSK: 4.88 dBm (Headset ANT 1) • Conducted Peak Power/ л/4-DQPSK: 4.9 dBm (Headset ANT 2) • Conducted Peak Power/ л/4-DQPSK: 5.45 dBm (Transceiver) c. Firmware Version: T1.00.05 Regions Contact Information USA SteelSeries ApS., 656 W Randolph St., Suite 3E, Chicago, IL 60661, USA +1 312 258 9467 More information and support from https://steelseries.com/

43 44 この機器の使用周波数帯では、 電子レンジ等の産業・科学・医療用機器のほか工場の製造ライン等で使用さ れている移動体識別用の構内無線局 （免許を要する無線局） 及び特定小電力無線局 （免許を要しない無線 局） 並びにアマチュア無線局 （免許を要する無線局） が運用されています。 １ この機器を使用する前に、 近くで移動体識別用の構内無線局及び特定小電力無線局並びにアマチュア無 線局が運用されていないことを確認して下さい。 ２ 万一、 この機器から移動体識別用の構内無線局に対して有害な電波干渉の事例が発生した場合には、 速 やかに使用周波数を変更するか又は電波の発射を停止した上、 下記連絡先にご連絡頂き、 混信回避のため の処置等 （例えば、 パーティションの設置など） についてご相談して下さい。 ３ その他、 この機器から移動体識別用の特定小電力無線局あるいはアマチュア無線局に対して有害な電波 干渉の事例が発生した場合など何かお困りのことが起きたときは、 次の連絡先へお問い合わせ下さい。 低功率電波輻射性電機管理辦法 取得審驗證明之低功率射頻器材 ， 非經核准 ， 公司 、 商號或使用者均不得擅自變更頻率 、 加大功率或變更原設計之特 性及功能 。 低功率射頻器材之使用不得影響飛航安全及干擾合法通信 ； 經發現有干擾現象時 ， 應立即停用 ， 並改善至 無干擾時方得繼續使用 。 前述合法通信 ， 指依電信管理法規定作業之無線電通信 。 低功率射頻器材須忍受合法通信或 工業 、 科學及醫療用電波輻射性電機設備之干擾 。 鋰電池安全使用指南 注意: 電池若未正確更換， 可能會爆炸， 請用原廠建議之同款的電池來更換。 電池不可當作一般的家庭廢棄物棄置， 請依據當地法規使用公共回收系統退回、 回收或處理電池。 電池極性 （+） 和 （ - ） 不得相反連接， 充電電池極性如果電池極性反轉， 則有爆炸危險。 請勿將此電池放在靠近火源或任何高溫的地方， 否則可能會因高熱源而發生爆炸(60℃以上)。 電池組不得受撞擊， 也不能用任何尖銳的物體去穿刺。 該電池組無防水功能， 不得暴露於潮濕場所避免受潮導致兩電池極性短路導致爆炸危險。 電池若是膨脹請勿繼續使用 *報廢電池請按照廢棄物管理辦法回收處理 《废弃电器电子产品回收处理管理条例》 提示性说明 为了更好地关爱及保护地球， 当用户不再需要此产品或产品寿命终止时， 请遵守国家废弃电器电子产品回收处理相 关法律法规， 将其交给当地具有国家认可的回收处理资质的厂商进行回收处理。 SteelSeries Products and Australian Consumer Law Our goods come with guarantees that cannot be excluded under Australian consumer law. You are entitled to a repair, replacement, or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You 廢電池請回收 are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Should your product be defective, you can make a claim under Australian consumer law. SteelSeries will provide its own remedies equivalent to those remedies in the consumer guarantee provisions of the Australian Consumer Law at any time within 24 months of the date of purchase. For the avoidance of doubt, SteelSeries acknowledges that the Australian Consumer Law may provide for remedies beyond 24 months for a number of its products. Summary of Australian statutory consumer guarantees Consumer guarantees in relation to goods The goods will be of acceptable quality, The goods will be fit for a particular purpose, The goods will match their de- scription, The goods will match the sample or demonstration model, You have title to the goods, You have undisturbed possession of the goods, There are no undisclosed securities on the goods. Consumer guarantees in relation to services We will provide the services with due care and skill, The services will be fit for a particular purpose, The services will be provided within a reasonable time. For SteelSeries-branded goods, in addition to the above, we also guarantee that we will provide repairs or spare parts for a reasonable time. Under Australian consumer law, the remedy you are entitled to if a product fails to meet a consumer guarantee will depend on whether the failure to comply with the guarantee is major or minor. Minor failures to comply with a consumer guarantee can normally be fixed or resolved in a reasonable amount of time. In this case, the seller can choose to offer you a refund, replacement, repair or, in the case of services, resupply. If the seller does not fix the problem or takes too long, you may be able to get it fixed by someone else and recover the costs from the seller depending on the circumstances. Remedies for major failure with goods Return the product and ask for a refund, Return the product and ask for an identical replacement, or one of similar value if reasonably available, Keep the product and ask for compensation for the drop in value caused by the problem. Remedies for major failure with services Cancel the contract and pay a reasonable amount for the work done, or seek a refund, For money already paid, keep the contract and negotiate a reduced price for the drop in value of the service — this may mean asking for some of your money back if you have already paid. For goods, there is a major failure to comply with a consumer guarantee when: • You would not have purchased the product if you had known about the problem. • The product is significantly different from the description, sample or demonstration model you were shown. • The product is substantially unfit for its normal purpose and cannot easily be made fit within a reasonable time. • The product is substantially unfit for a purpose that you told the supplier about, and cannot easily be made fit within a reasonable time. • The product is unsafe. For services, there is a major failure to comply with a consumer guarantee when:

45 46 • You would not have engaged the service if you had known the nature and extent of the problem. • The service does not meet the reasonable expectations for that type of service, and the problem cannot be rectified within a reasonable time. • You told the supplier that you wanted the service for a specific purpose, which was not fulfilled, and the problem could not be easily rectified within a reasonable time. • You told the supplier that you wanted a specific result, yet the service and end result failed to meet your specifications and could not be easily rectified within a reasonable time. • The supply of the service has created an unsafe situation. For information on Australian consumer laws, please visit Australian consumer law website at http://www.consumerlaw.gov.au. Importer Name and Address: Ingram Micro Pty LTD / Level1, 61 Dunning Avenue. Rosebery NSW 2018 Telephone technical support: +61-2-9381-6000 This product is compliant with requirements of Circular No. 30/2011/TT-BCT Regulations “STIPULATING TEM- PORARILY THE PERMISSIBLE CONTENT LIMITATION OF SOME TOXIC CHEMICALS IN THE ELECTRONIC, ELECTRICAL PRODUCTS” Restriction on Hazardous Substances statement (India) This product complies with the “India E-waste Rule 2011” and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01 weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule. 微功率设备应当在其产品使用说明： （一） 符合 “微功率短距离无线电发射设备目录和技术要求” 的具体条款和使用场景， 采用的天线类型和性能， 控制、 调整及开关等使用方法； （二） 不得擅自改变使用场景或使用条件、 扩大发射频率范围、 加大发射功率 （包括额外加装射频功率放大器） ， 不得 擅自更改发射天线； （三） 不得对其他合法的无线电台 （站） 产生有害干扰， 也不得提出免受有害干扰保护； （四） 应当承受辐射射频能量的工业、 科学及医疗 （ISM） 应用设备的干扰或其他合法的无线电台 （站） 干扰； （五） 如对其他合法的无线电台 （站） 产生有害干扰时， 应立即停止使用， 并采取措施消除干扰后方可继续使用； （六） 在航空器内和依据法律法规、 国家有关规定、 标准划设的射电天文台、 气象雷达站、 卫星地球站 （含测控、 测距、 接收、 导航站） 等军民用无线电台 （站） 、 机场等的电磁环境保护区域内使用微功率设备， 应当遵守电磁环境保护及相 关行业主管部门的规定； （七） 禁止在以机场跑道中心点为圆心、 半径5000米的区域内使用各类模型遥控器； （八） 微功率设备使用时温度和电压的环境条件。 《废弃电器电子产品回收处理管理条例》 提示性说明 为了更好地关爱及保护地球， 当用户不再需要此产品或产品寿命终止时， 请遵守国家废弃电器电子产品回收处理相 关法律法规， 将其交给当地具有国家认可的回收处理资质的厂商进行回收处理。 锂电池安全使用指南 注意: 电池若未正确更换， 可能会爆炸， 请用原厂建议之同款的电池来更换。 电池不可当作一般的家庭废弃物弃置， 请依据当地法规使用公共回收系统退回、 回收或处理电池。 1.电池极性 （+） 和 （ - ） 不得相反连接， 充电电池极性如果电池极性反转， 则有爆炸危险。 2.请勿将此电池放在靠近火源或任何高温的地方， 否则可能会因高热源而发生爆炸。 3.电池组不得受撞击， 也不能用任何尖锐的物体去穿刺。 4.该电池组无防水功能， 不得暴露于潮湿场所避免受潮导致两电池极性短路导致爆炸危险。 5. 电池若是膨胀请勿继续使用 微功率设备产品使用说明： （一） 符合 “微功率短距离无线电发射设备目录和技术要求” 的具体条款和使用场景， 采用的天线类型和性能， 控 制、 调整及开关等使用方法； （二） 不得擅自改变使用场景或使用条件、 扩大发射频率范围、 加大发射功率 （包括额外加装射频功率放大器） ， 不得擅自更改发射天线； （三） 不得对其他合法的无线电台 （站） 产生有害干扰， 也不得提出免受有害干扰保护； （四） 应当承受辐射射频能量的工业、 科学及医疗 （ISM） 应用设备的干扰或其他合法的无线电台 （站） 干扰； （五） 如对其他合法的无线电台 （站） 产生有害干扰时， 应立即停止使用， 并采取措施消除干扰后方可继续使用； （六） 在航空器内和依据法律法规、 国家有关规定、 标准划设的射电天文台、 气象雷达站、 卫星地球站 （含测控、 测 距、 接收、 导航站） 等军民用无线电台 （站） 、 机场等的电磁环境保护区域内使用微功率设备， 应当遵守电磁 环境保护及相关行业主管部门的规定； （七） 禁止在以机场跑道中心点为圆心、 半径5000米的区域内使用各类模型遥控器； （八） 微功率设备使用时温度和电压的环境条件。 Ukraine RoHS: Обладнання відповідає вимогам Технічного регламенту щодо обмеження використання деяких небезпечних речовин в електричному та електронному обладнанні, затвердженого постановою Кабінету Міністрів України від 3 грудня 2008 № 1057

47 48 根据中国大陆 《电子电气产品有害物质限制使用标识要求》 ， 以下部分列出了产品中可能包含的有害物质的名称和含量: 零部件名称 有害物质 铅 (Pb) 汞 (Hg) 镉 (Cd) 六价铬 (Cr(VI)) 多溴联苯 (PBB) 多溴二苯醚 (PBDE) 电路板组件 其他线材 *： 电路板组件包括印刷电路板及其构成的零部件， 如电阻、 电容、 集成电路、 连接器等。 本表格依据SJ/T 11364的规定编制。 O： 表示该有害物质在该部件所有均质材料中的含量均在 GB/T 26572规定的限量要求以下。 X： 表示该有害物质至少在该部件的某一均质材料中的含量超出GB/T 26572规定的限量要求； 上表中打 “X” 的部件， 应功能需要， 部分有害物质含量超出GB/T 26572规定的限量要求， 但是符合欧盟RoHS法规要 求(属于豁免部分)。 ACMA Compliance (Australia/ New Zealand) Malaysia Approval (SIRIM) Direct Current HIDF16000265 Singapore approval (IMDA) Complies with IMDA Standards DA 106032 Custom Union Compliance. (Russia / Belarus / Kazakhstan / Armenia / Kyrgyzstan) RED (2014/53/EU), EMCD(2014/30/EU) and LVD (2014/35/EU) Compliances (The Commission of the European Community.) SteelSeries ApS Havneholmen 8, 1st Fl. 2450 Copenhagen SV Denmark Product Name (產品名稱/产品名称): Wireless Headset (無線耳機/无缐耳机) Model No. (型號/型号): HS33 Rated (規格/规格): 5V 500mA Accessories information (配件資訊/配件信息) Product Name: (產品名稱/产品名称): Transceiver (收發器/收发器) Model No. (型號/型号): HS33TXQ HS33TXB Rated (規格/规格): 5V 100mA Made in China 中國製造/中国制造 產品使用環境溫度: 0 - 40度 Operating Temperature: 0 to + 40 °C

More information and support from https://steelseries.com/ Regions Contact Information 亞洲 新北市中和區建一路186號4樓及4樓之4 +886 2 8226 3858 Asia 4F.-4, No. 186, Jian 1st Rd., Zhonghe Dist., New Taipei City 235603, Taiwan (R.O.C.) +886 2 8226 3858 USA 656 W Randolph St, Suite 3E, Chicago, IL 60661, USA +1 312 258 9467 Europe Havneholmen 8, 1st Floor, DK-2450 Copenhagen SV, Denmark +45 70 25 00 75

learn more at steelseries.com