Sony STR-DN1000 manual

View a manual of the Sony STR-DN1000 below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Sony
  • Product: Receiver
  • Model/name: STR-DN1000
  • Filetype: PDF
  • Available languages: English, Dutch, German, Swedish, Spanish

Table of Contents

Page: 0
©2009 Sony Corporation
4-136-735-41(1)
Multi Channel AV
Receiver
Operating Instructions
STR-DN1000
Page: 1
2GB
To reduce the risk of fire or electric
shock, do not expose this apparatus to
rain or moisture.
To reduce the risk of fire, do not cover the
ventilation opening of the apparatus with
newspapers, tablecloths, curtains, etc.
Do not place the naked flame sources such as lighted
candles on the apparatus.
To reduce the risk of fire or electric shock, do not
expose this apparatus to dripping or splashing, and
do not place objects filled with liquids, such as
vases, on the apparatus.
Do not install the appliance in a confined space, such
as a bookcase or built-in cabinet.
As the main plug is used to disconnect the unit from
the mains, connect the unit to an easily accessible
AC outlet. Should you notice an abnormality in the
unit, disconnect the main plug from the AC outlet
immediately.
Do not expose batteries or apparatus with battery-
installed to excessive heat such as sunshine, fire or
the like.
The unit is not disconnected from the mains as long
as it is connected to the AC outlet, even if the unit
itself has been turned off.
Excessive sound pressure from earphones and
headphones can cause hearing loss.
This symbol is intended to alert
the user to the presence of the Hot
Surface that may be hot if it is
touched during the normal
operation.
For customers in Europe
Disposal of Old Electrical &
Electronic Equipment
(Applicable in the European
Union and other European
countries with separate
collection systems)
This symbol on the product or on its packaging
indicates that this product shall not be treated as
household waste. Instead it shall be handed over to
the applicable collection point for the recycling of
electrical and electronic equipment. By ensuring this
product is disposed of correctly, you will help
prevent potential negative consequences for the
environment and human health, which could
otherwise be caused by inappropriate waste
handling of this product. The recycling of materials
will help to conserve natural resources. For more
detailed information about recycling of this product,
please contact your local Civic Office, your
household waste disposal service or the shop where
you purchased the product.
WARNING
Page: 2
3GB
Disposal of waste batteries
(applicable in the European
Union and other European
countries with separate
collection systems)
This symbol on the battery or on the packaging
indicates that the battery provided with this product
shall not be treated as household waste.
On certain batteries this symbol might be used in
combination with a chemical symbol. The chemical
symbols for mercury (Hg) or lead (Pb) are added if
the battery contains more than 0.0005% mercury or
0.004% lead.
By ensuring these batteries are disposed of correctly,
you will help prevent potentially negative
consequences for the environmentand human health
which could otherwise be caused by inappropriate
waste handling of the battery. The recycling of the
materials will help to conserve natural resources.
In case of products that for safety, performance or
data integrity reasons require a permanent
connection with an incorporated battery, this battery
should be replaced by qualified service staff only.
To ensure that the battery will be treated properly,
hand over the product at end-of-life to the applicable
collection point for the recycling of electrical and
electronic equipment.
For all other batteries, please view the section on
how to remove the battery from the product safely.
Hand the battery over to the applicable collection
point for the recycling of waste batteries.
For more detailed information about recycling of
this product or battery, please contact your local
Civic Office, your household waste disposal service
or the shop where you purchased the product.
Notice for customers: The following
information is only applicable to
equipment sold in countries applying
EU Directives.
The manufacturer of this product is Sony
Corporation, 1-7-1 Konan Minato-ku Tokyo,
108-0075 Japan. The Authorized Representative for
EMC and product safety is Sony Deutschland
GmbH, Hedelfinger Strasse 61, 70327 Stuttgart,
Germany. For any service or guarantee matters
please refer to the addresses given in separate
service or guarantee documents.
For customers in Australia
Disposal of Old Electrical &
Electronic Equipment
(Applicable in the European
Union and other European
countries with separate
collection systems)
About This Manual
• The instructions in this manual are for model
STR-DN1000. Check your model number by
looking at the lower right corner of the front panel.
In this manual, models of area code CEL is used
for illustration purposes unless stated otherwise.
Any difference in operation is clearly indicated in
the text, for example, “Models of area code E51
only”.
• The instructions in this manual describe the
controls on the supplied remote. You can also use
the controls on the receiver if they have the same
or similar names as those on the remote.
• “Neural-THX” and “NEURAL-THX” introduced
in the Operating Instructions and displayed on the
GUI menu screen and on the display mean Neural-
THX Surround.
About area codes
The area code of the receiver you purchased is
shown on the lower right portion of the rear panel
(see the illustration below).
Any differences in operation, according to the area
code, are clearly indicated in the text, for example,
“Models of area code AA only”.
L
R
1 OUT
FRONT A
L
R
SURROUND
Area code
Page: 3
4GB
This receiver incorporates Dolby* Digital and Pro
Logic Surround and the DTS** Digital Surround
System.
* Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
** Manufactured under license under U.S. Patent
#’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762;
6,226,616; 6,487,535; 7,212,872; 7,333,929;
7,392,195; 7,272,567 & other U.S. and
worldwide patents issued & pending. DTS is a
registered trademark and the DTS logos, Symbol,
DTS-HD and DTS-HD Master Audio are
trademarks of DTS, Inc. © 1996-2008 DTS, Inc.
All Rights Reserved.
This receiver incorporates High-Definition
Multimedia Interface (HDMITM) technology.
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC.
The font type (Shin Go R) installed in this receiver
is provided by MORISAWA & COMPANY LTD.
These names are the trademarks of MORISAWA &
COMPANY LTD., and the copyright of the font also
belongs to MORISAWA & COMPANY LTD.
This product using Neural-THX®
Surround is
manufactured under license from Neural Audio
Corporation and THX Ltd. Sony Corporation hereby
grants the user a non-exclusive, non-transferable,
limited right of use to this product under USA and
foreign patent, patent pending and other technology
or trademarks owned by Neural Audio Corporation
and THX Ltd. “Neural Surround”, “Neural Audio”,
“Neural” and “NRL” are trademarks and logos
owned by Neural Audio Corporation, THX is a
trademark of THX Ltd., which may be registered in
some jurisdictions. All rights reserved.
iPod is a trademark of Apple Inc., registered in the
U.S. and other countries.
All other trademarks and registered trademarks are
of their respective holders. In this manual, ™ and ®
marks are not specified.
The Bluetooth word mark and logos are owned by
the Bluetooth SIG, Inc. and any use of such marks
by Sony Corporation is under license.
Other trademarks and trade names are those of their
respective owners.
“M-crew Server” is a trademark of Sony
Corporation.
“x.v.Colour” and “x.v.Colour” logo are trademarks
of Sony Corporation.
“BRAVIA” is a trademark of Sony Corporation.
“S-AIR” and its logo are trademarks of Sony
Corporation.
DLNA and DLNA CERTIFIED are trademarks
and/or service marks of the Digital Living Network
Alliance.
The receiver is compatible with the S-AIR function,
which allows transmission of sound between S-AIR
products wirelessly.
The following S-AIR products can be used with the
receiver:
• Surround amplifier: You can enjoy surround
speaker sound wirelessly.
• S-AIR receiver: You can enjoy receiver sound in
another room.
These S-AIR products can be purchased as an option
(the S-AIR product lineup differs depending on the
area).
Notes or instructions for the surround amplifier or
S-AIR receiver in this operating instructions refer
only to when the surround amplifier or S-AIR
receiver is used.
For details on the S-AIR function, see “S-AIR
Operations” (page 89).
On copyrights
About the S-AIR function
Page: 4
5GB
Table of Contents
Description and location of parts .................. 7
Getting Started
1: Installing speakers................................... 16
2: Connecting speakers ............................... 18
3: Connecting the TV.................................. 20
4a: Connecting the audio components ........ 22
4b: Connecting the video components ........ 24
5: Connecting the antennas (aerials) ........... 34
6: Preparing the receiver and the remote..... 35
7: Displaying the GUI menu on the TV
screen ..................................................... 36
8: Selecting the front speaker system.......... 37
9: Calibrating the appropriate speaker
settings automatically
(Auto Calibration).................................. 39
Guide to on-screen display operation.......... 44
Playback
Enjoying sound/images from the
component connected to the receiver..... 46
Enjoying sound/images from the
components connected to the
DIGITAL MEDIA PORT....................... 48
Tuner Operations
Listening to FM/AM radio.......................... 51
Presetting FM/AM radio stations................ 53
Using the Radio Data System (RDS).......... 54
(Models of area code CEL, CEK only)
Enjoying Surround Sound
Playing back with 2-channel sound ............ 56
Playing back with multi-channel
surround ................................................. 57
Enjoying a surround effect for
music/movie........................................... 60
Resetting sound fields to the initial
settings ................................................... 63
Amplifier Operations
Using the setting menu................................63
Settings for the Auto Calibration
(Auto Calibration menu) ........................65
Setting for the speaker
(Speaker Settings menu).........................66
Settings for the surround sound
(Surround Settings menu).......................70
Settings for the EQ (EQ menu) ...................71
Settings for the audio
(Audio Settings menu) ...........................71
Settings for the video
(Video Settings menu)............................72
Settings for HDMI
(HDMI Settings menu)...........................74
Settings for the S-AIR
(S-AIR Settings menu) ...........................75
Operating without connecting to a TV........75
“BRAVIA” Sync Features
What is “BRAVIA” Sync?...........................85
Preparing for the “BRAVIA” Sync..............86
Playing back components with one-touch
operation (One-Touch Play) ...................87
Enjoying the TV sound from the speakers
connected to the receiver
(System Audio Control) .........................88
Turning off the receiver with the TV
(System Power Off)................................88
S-AIR Operations
About S-AIR products.................................89
Setting up an S-AIR product .......................90
Enjoying the system’s sound in another
room .......................................................95
Changing the channel for better sound
transmission............................................97
Stabilizing S-AIR reception ........................98
Enjoying the S-AIR receiver while the
S-AIR main unit is in standby mode ......99
continued
Page: 5
6GB
Other Operations
Switching between digital and analog
audio (INPUT MODE) .........................100
Enjoying the sound/images from other
inputs ....................................................100
Using the Sleep Timer ...............................103
Changing the brightness of the front
panel display (DIMMER).....................103
Enjoying the surround effect at low
volume levels (NIGHT MODE) ...........104
Recording using the receiver .....................104
Using a bi-amplifier connection ................105
Using the Remote
Operating each component using the
remote...................................................107
Programming the remote ...........................109
Clearing all the contents of the remote’s
memory.................................................113
Additional Information
Glossary.....................................................114
Precautions ................................................117
Troubleshooting.........................................118
Specifications.............................................125
Index..........................................................127
Page: 6
7GB
Description and location of parts
Front panel
MULTI CHANNEL DECODING
?/1
INPUT SELECTOR
MUTING
MASTER VOLUME
SPEAKERS
PHONES 2 CH/
A.DIRECT A.F.D. MOVIE MUSIC INPUT MODE DIMMER DISPLAY
VIDEO 2 IN
VIDEO L AUDIO R
AUTO CAL MIC
6
3 8
4 7
5
9
q;
qa
qs
qd
qf
qg
qh
1 2
Name Function
A ?/1 (on/standby) Press to turn the receiver on
or off (page 35, 36, 53, 63).
B Remote sensor Receives signals from
remote commander.
C White lamp Lights up when the receiver
is on.
Lights off when the
receiver is off or the
“DIMMER” is set to
“70% DOWN”.
D MULTI
CHANNEL
DECODING lamp
Lights up when multi
channel audio signals are
decoded (page 120).
Name Function
E Display The current status of the
selected component or a list
of selectable items appears
here (page 9).
F MUTING Press to turn off the sound
temporarily.
Press MUTING again to
restore the sound (page 47,
118).
G INPUT
SELECTOR +/–
Press repeatedly to select
the input source to
playback (page 47, 100,
104).
H MASTER
VOLUME
Turn to adjust the volume
level of all speakers at the
same time (page 47, 118).
continued
Page: 7
8GB
Name Function
I VIDEO 2 IN
jacks
Connects to a portable
audio/video component
such as a camcorder or
video game (page 31, 47).
J AUTO CAL MIC
jack
Connects to the supplied
optimizer microphone for
the Auto Calibration
function (page 40).
K DISPLAY Press repeatedly to select
information displayed on
the display (page 81, 124).
L DIMMER Press repeatedly to adjust
thebrightness of the display
(page 103).
M INPUT MODE Press to select the input
mode when the same
components are connected
to both digital and analog
jacks (page 100).
N 2CH/A.DIRECT Press to select a sound field
(page 56, 57, 60).
A.F.D.
MOVIE
MUSIC
O SPEAKERS Press to select the front
speaker system (page 37).
P PHONES jack Connects to headphones
(page 119).
Page: 8
9GB
About the indicators on the display
1 2 4 5 6 8
7 9
qh
qk qj q;
3
qa
qg qf qs
qd
Name Function
A SW Lights up when subwoofer is
connected and the audio signal
is output from the
SUBWOOFER jack. While this
indicator lights up, the receiver
creates a subwoofer signal
based on the LFE signal in the
disc being played back or the
low frequency components of
the front channels.
B LFE Lights up when the disc being
played back contains an LFE
(Low Frequency Effect)
channel and the LFE channel
signal is actually being
reproduced.
C Input
indicators
COAX
OPT
HDMI
DMPORT
ANALOG
Light up to indicate the current
input.
Lights up when INPUT MODE
is set to “AUTO” and the source
signal is a digital signal being
input through the COAXIAL
jack (page 100).
Lights up when INPUT MODE
is set to “AUTO” and the source
signal is a digital signal being
input through the OPTICAL
jack (page 100).
The receiver recognizes a
component connected via an
HDMI IN jack.
The DIGITAL MEDIA PORT
adapter is connected and
“DMPORT” is selected.
No digital signal is being input.
When INPUT MODE is set to
“ANALOG” or when the
“Analog Direct” is being
selected, it also lights up.
Name Function
D Dolby
Digital
Surround
indicators
D
D EX
D+
TrueHD
Lights up one of the respective
indicators when the receiver is
decoding the corresponding
Dolby Digital format signals.
Dolby Digital
Dolby Digital Surround EX
Dolby Digital Plus
Dolby TrueHD
Note
When playing a Dolby Digital
format disc, be sure that you
have made digital connections
and that INPUT MODE is set
to “AUTO” (page 100).
E Neural-THX Lights up when the receiver
applies Neural-THX
processing to input signals.
F DTS(-ES)
indicators
DTS
DTS 96/24
NEO:6
DTS-ES
Light up when DTS or DTS-
ES signals are input.
Lights up when the receiver is
decoding DTS signals.
Lights up when the receiver is
decoding DTS 96 kHz/24 bit
signals.
Lights up when DTS Neo:6
Cinema/Music decoder is
activated (page 59).
Lights up when the receiver is
decoding DTS-ES signals.
Note
When playing a DTS format
disc, be sure that you have
made digital connections and
that INPUT MODE is set to
“AUTO” (page 100).
continued
Page: 9
10GB
Name Function
G D.RANGE Lights up when dynamic range
compression is activated.
H SP A/SP B/
SP A+B
Lights up according to the front
speaker system used (page 37).
However, these indicators do not
light up if the speaker output is
turned off or if headphones are
connected.
I SLEEP Lights up when the Sleep Timer is
activated.
J A.DIRECT Lights up when “Analog Direct”
is selected.
K Tuning
indicators
MEM
MONO
RDS
ST
Lights up when the receiver tunes
in radio stations.
Lights up when a memory
function, such as Preset Memory
(page 53), etc., is activated.
Monaural broadcast
RDS information is received.
Note
“RDS” appears for models of area
code CEL, CEK only.
Stereo broadcast
L S-AIR Lights up when the S-AIR
transmitter (not supplied) is
connected.
M Dolby
Pro Logic
indicators
PL
PL II
PL IIx
Lights up one of the respective
indicators when the receiver
applies Dolby Pro Logic
processing to 2 channel signals in
order to output the center and
surround channel signals.
Dolby Pro Logic
Dolby Pro Logic II
Dolby Pro Logic IIx
Note
These indicators do not light up
when either the center speaker and
surround speaker is not connected.
N BI-AMP Lights up when “SB Assign” is set
to “BI-AMP” (page 105).
O EQ Lights up when the equalizer is
activated.
Name Function
P DTS-HD
indicators
DTS-HD
MSTR
DTS-HD HI
RES
Lights up one of the respective
indicators when the receiver is
decoding the corresponding
DTS-HD format signals.
DTS-HD Master Audio
DTS-HD High Resolution
Audio
Q LPCM Lights up when Linear PCM
(Pulse Code Modulation)
signals are input.
R Playback
channel
indicators
L
R
C
SL
SR
S
SBL
SBR
SB
The letters (L, C, R, etc.)
indicate the channels being
played back. The boxes around
the letters vary to show how the
receiver downmixes the source
sound (based on the speaker
settings).
Front Left
Front Right
Center (monaural)
Surround Left
Surround Right
Surround (monaural or the
surround components obtained
by Pro Logic processing)
Surround Back Left
Surround Back Right
Surround Back (the surround
back components obtained by
6.1 channel decoding)
Example:
Recording format (Front/
Surround): 3/2.1
Output channel: When “SP
Pattern” is set to “3/0.1”
(page 66, 78)
Sound Field: “A.F.D. Auto”
Page: 10
11GB
Rear panel
6
8
1 4
3
5
7 6
2
L
R
VIDEO
OUT
MONITOR
L
R
DIGITAL (ASSIGNABLE)
DC5V
0.7A MAX
HDMI
ANTENNA
DMPORT
IN 4
ASSIGNABLE (INPUT ONLY)
IN 3
IN 2
IN 3 IN 1 OUT
AM
Y
PB/
CB
COMPONENT VIDEO
OUT IN
PR/
CR
IN 2 IN 1 MONITOR
OUT
SA-CD/CD/CD-R VIDEO 1
IN
TV
AUDIO
IN
VIDEO
IN
SAT
AUDIO
OUT
AUDIO
OUT
VIDEO
OUT
OPTICAL IN
AUDIO
IN
VIDEO
IN
SUBWOOFER
AUDIO
IN
VIDEO
IN
BD
L
R
L
R
SPEAKERS
SAT IN BD IN DVD IN
OPTICAL
CENTER
FRONT A
COAXIAL
ASSIGNABLE (INPUT ONLY)
SURROUND BACK/
FRONT B/
BI-AMP
TV
EZW-T100
L
R
SURROUND
(for AUDIO)
A S-AIR (EZW-T100)
CAUTION
Please do not remove
the slot cover until
you want to install
the wireless
transmitter.
Connects to a
wireless transmitter
(not supplied) (page
91).
B DMPORT
DMPORT
jack
Connects to a Sony
DIGITAL MEDIA
PORT adapter
(page 22).
C ANTENNA section
FM
ANTENNA
jack
Connects to the FM
wire antenna (aerial)
supplied with this
receiver (page 34).
AM
ANTENNA
terminals
Connects to the AM
loop antenna (aerial)
supplied with this
receiver (page 34).
With slot cover
slot
D DIGITAL INPUT/OUTPUT section
OPTICAL IN
jacks
Connects to a BD
player, etc. (page
20, 25, 28, 29, 30).
COAXIALIN
jack
HDMI IN/
OUT* jacks
Connects to a DVD
player, satellite
tuner, or a Blu-ray
disc player. The
image is output to a
TV or a projector
while the sound can
be output from a TV
or/and speakers
connected to this
receiver (page 20,
25).
E SPEAKERS section
Connects to
speakers (page 18).
continued
Page: 11
12GB
* You can watch the selected input image when you
connect the MONITOR OUT or HDMI OUT jack
to a TV (page 20). You can operate this receiver
using a GUI (Graphical User Interface) if you
connect HDMI OUT jack or COMPONENT
VIDEO MONITOR OUT jacks to a TV (page 36).
You can use the supplied remote to operate the
receiver and to control the Sony audio/video
components that the remote is assigned to
operate.
You can also program the remote to control
non-Sony audio/video components. For
details, see “Programming the remote” (page
109).
RM-AAP042
F AUDIO INPUT/OUTPUT section
AUDIO IN/
OUT jacks
Connects to a Super
Audio CD player,
etc. (page 20, 22,
25).
AUDIO OUT
jack
Connects to
subwoofer (page
18).
G VIDEO/AUDIO INPUT/OUTPUT
section
AUDIO IN/
OUT jacks
Connects to a VCR,
Blu-ray disc player,
etc. (page 29, 30,
31).
VIDEO IN/
OUT* jacks
H COMPONENT VIDEO INPUT/
OUTPUT section
Y, PB/CB,
PR/CR IN/
OUT* jacks
Connects to a BD
player, TV, satellite
tuner, etc. (page 20,
28, 29, 30).
White (L)
Red (R)
Black
White (L)
Red (R)
Yellow
Green
(Y)
Blue
(PB/CB)
Red
(PR/CR)
Remote commander
1 2 3
4 5 6
7 8 9
-/-- 0/10 ENT/MEM
2CH/
A.DIRECT A.F.D. MOVIE MUSIC
THEATRE
SYSTEM STANDBY
RM SET UP
?/1
CLEAR/>10
SHIFT
TUNING – TUNING +
DISC SKIP D.TUNING
RESOLUTION
.
m M
>
X x
MUTING
VIDEO 1 VIDEO 2 BD
SAT TV
HDMI 3
HDMI 2
HDMI 1
HDMI 4
SA-CD/
CD DMPORT
TUNER
TV VOL
MASTER VOL
TV CH
PRESET
< <
MENU
AV ?/1
F1 F2
TV INPUT
TOP MENU MENU
BD/DVD
WIDE
RETURN/
EXIT
TOOLS/
OPTIONS
HOME
DISPLAY GUI MODE
O
DVD
INPUT
MODE SLEEP
NIGHT
MODE
TV AMP
1
2
3
4
5
6
7
8
0
qs
qd
qf
qg
9
qh
qj
qk
ql
w;
wa
wd
wf
wh
ws
qa
wg
Page: 12
13GB
Name Function
A AV ?/1a)
(on/standby)
Press to turn on or off the
audio/video components that
the remote is programmed to
operate.
To turn the TV on or off, press
TV (D) and then press AV
?/1.
If you press ?/1 (B) at the
same time, it will turn off the
receiver and other
components (SYSTEM
STANDBY).
Note
The function of the AV ?/1
switch changes automatically
each time you press the input
buttons (E).
B ?/1
(on/standby)
Press to turn the receiver on or
set it to the standby mode.
To turn off all components,
press ?/1 and AV ?/1 (A) at
the same time (SYSTEM
STANDBY).
Saving the power in
standby mode.
When “Ctrl for HDMI” is set
to “OFF” (page 86) and
“S-AIR Stby” is set to “OFF”
(page 99).
C AMP Press to enable the receiver
operation (page 75).
D TV Press to light up the button. It
changes the remote key
function to activate the
buttons with yellow printing.
It also activate the DISPLAY
(U), TOOLS/OPTIONS
(K), HOME (L), RETURN/
EXIT O (T), (J), and
V/v/B/b (J) buttons to
perform menu operations for
Sony TVs only.
E Input buttons
(SATb)
)
Press one of the buttons to
select the component you
want to use. When you press
any of the input buttons, the
receiver turns on. The buttons
are factory assigned to control
Sony components (page 47).
You can program the remote
to control non-Sony
components following the
steps in “Programming the
remote” on page 109.
Name Function
Numeric
buttonsa)
(number 5b)
)
Press SHIFT (X), then press
numeric buttons to
– preset/tune to preset stations.
– select track numbers of the
CD player, DVD player, Blu-
ray disc player or MD deck,
etc. Press 0/10 to select track
number 10.
– select channel numbers of
the VCR or satellite tuner,
etc.
Press TV (D) and then press
the numeric buttons to select
the TV channels.
ENT/MEMa)
Press SHIFT (X), then press
ENT/MEM to
– enter the value after selecting
a channel, disc or track using
the numeric buttons.
– store a station during tuner
operation.
To enter the value of Sony TV,
press TV (D) and then press
ENT/MEM.
CLEARa)
Press SHIFT (X), then press
CLEAR to
– clear a mistake when you
press the incorrect numeric
button.
– return to continuous
playback, etc. of the satellite
tuner or DVD player.
-/--a)
Press SHIFT (X), then press
-/-- to select the channel entry
mode, either one or two digit
of the VCR or satellite tuner.
To select the channel entry
mode of the TV, press TV (D)
and then press -/--.
>10a)
Press SHIFT (X), then press
>10 to
– select track numbers over 10
of the CD player, DVD
player,Blu-ray disc player or
MD deck, etc.
– select channel numbers of
the Digital CATV terminal.
F 2CH/
A.DIRECT
Press to select a sound field
(page 56, 57, 60).
A.F.D.
MOVIE
MUSIC
continued
Page: 13
14GB
Name Function
G SLEEP Press to activate the Sleep
Timer function and the
duration which the receiver
turns off automatically
(page 103).
H NIGHT MODE Press to activate the NIGHT
MODE function (page 104).
I GUI MODE Press to display the GUI menu
on the TV screen.
J
V/v/B/ba)
Press V/v/B/b to select the
menu items.
Then press to enter the
selection.
K TOOLS/
OPTIONSa)
Press to display and select
items from the option menus
for receiver, DVD player,
Blu-ray disc player or satellite
tuner.
Press TV (D) and then press
TOOLS/OPTIONS to display
the options of Sony TV.
L HOMEa),
MENUa)
Press to display the menu to
operate the audio/video
components.
To display the menus of Sony
TV, press TV (D) and then
press HOME.
M ./>a)
m/Ma)
Na)b)
Xa)
xa)
Press to operate the DVD
player, Blu-ray disc player,
CD player, MD deck, tape
deck, or component
connected to the DIGITAL
MEDIA PORT adapter, etc.
/ a)
Press to replay the previous
scene or fast forward the
current scene of the DVD
player or Blu-ray disc player,
etc.
TUNING +/–a)
Press to scan a station.
D.TUNINGa)
Press to enter direct tuning
mode (page 52, 84).
N TV CH +b)
/–a)
Press TV (D) and then press
TV CH +/– to select preset
TV channels.
PRESET
+b)
/–a)
Press to
– select preset stations.
– select preset channels of the
VCR, satellite tuner,
Blu-ray disc player, DVD
player, LD player, DVD/
VHS COMBO, or DVD/
HDD COMBO.
,
a)
< <
Name Function
O F1a)
, F2a)
Press BD or DVD (E), then
press F1 or F2 to select a
component.
• DVD/HDD COMBO
F1: HDD
F2: DVD disc, Blu-ray disc
• DVD/VHS COMBO
F1: DVD disc, Blu-ray disc
F2: VHS
P BD/DVD TOP
MENUa)
Press to display the menu or
on-screen guide of the DVD
player, Blu-ray disc player,
PSX or DVD/VHS COMBO
on the TV screen. Then, use
V/v/B/b (J) and (J) to
perform menu operations.
BD/DVD
MENUa)
Press to display the menu of
the DVD player or Blu-ray
disc player on the TV screen.
Then, use V/v/B/b (J) and
(J) to perform menu
operations.
TV INPUTa)
Press TV (D) and then press
TV INPUT to select the input
signal (TV input or video
input).
WIDEa)
Press TV (D) and then press
WIDE to select the wide
picture mode.
Q MUTINGa)
Press to turn off the sound
temporarily. Press the button
again to restore the sound.
To mute the sound of the TV,
press TV (D) and then press
MUTING.
R TV VOL +/–a) Press TV (D) and then press
TV VOL +/– to adjust the TV
volume level.
MASTER
VOL +/–a)
Press to adjust the volume
level of all speakers at the
same time.
S DISC SKIPa)
Press to skip disc when using
a multi-disc changer.
Page: 14
15GB
a)
See the table on page 108 for information on the
buttons that you can use to control each
component.
b)
The number 5/SAT, TV CH +/PRESET + and N
buttons have tactile dots. Use the tactile dots as
references when operating the receiver.
Notes
• Some functions explained in this section may not
work depending on the model.
• The above explanation is intended to serve as an
example only. Therefore, depending on the
component, the above operation may not be
possible or may operate differently than described.
Name Function
T RETURN/
EXIT Oa)
Press to
– return to the previous menu.
– exit the menu while the
menu or on-screen guide of
the VCD player, DVD
player, etc. is displayed on
the TV screen.
To return to the previous
menu of Sony TV, press TV
(D) and then press
RETURN/EXIT O.
U DISPLAYa)
Press to display the current
status of or information on
components connected to the
receiver.
Note
In the GUI MODE, press the
button to display the menu on
the TV screen.
V RESOLUTION Press repeatedly to change the
resolution of signals output
from the HDMI OUT or
COMPONENT VIDEO
MONITOR OUT jack (page
72).
W INPUT MODE Press to select the input mode
when the same components
are connected to both digital
and analog jacks (page 100).
X SHIFT Press to light up the button. It
changes the remote button
function to activate the
buttons with pink printing.
Y THEATRE Press to turn the Theatre mode
on and off when connecting
the receiver to products
featuring “BRAVIA” Sync.
Z RM SET UP Press to set up the remote.
Page: 15
16GB
1: Installing speakers
This receiver allows you to use a 7.1 channel
system (7 speakers and one subwoofer).
To fully enjoy theater-like multi channel
surround sound requires five speakers (two
front speakers, a center speaker, and two
surround speakers) and a subwoofer (5.1
channel).
Example of a 5.1 channel
speaker system configuration
AFront speaker (left)
BFront speaker (right)
CCenter speaker
DSurround speaker (left)
ESurround speaker (right)
HSubwoofer
You can enjoy high fidelity reproduction of
DVD or Blu-ray disc software recorded sound
in the Surround EX format if you connect one
additional surround back speaker (6.1 channel
system) or two surround back speakers (7.1
channel system).
Example of a 7.1 channel
speaker system configuration
AFront speaker (left)
BFront speaker (right)
CCenter speaker
DSurround speaker (left)
ESurround speaker (right)
FSurround back speaker (left)
GSurround back speaker (right)
HSubwoofer
Getting Started
Enjoying a 5.1/7.1 channel
system
Page: 16
17GB
Getting
Started
Tips
• When you connect a 7.1 channel speaker system,
the angle A should be the same.
• When you connect a 6.1 channel speaker system,
place the surround back speaker behind the
listening position.
• Since the subwoofer does not emit highly
directional signals, you can place it wherever you
want.
Page: 17
18GB
2: Connecting speakers
Before connecting cords, be sure to disconnect the AC power cord (mains lead).
AFront speaker A (left)
BFront speaker A (right)
CCenter speaker
DSurround speaker (left)
ESurround speaker (right)
FSurround back speaker (left)a)b)c)
GSurround back speaker (right)a)b)c)
HSubwooferd)
VIDEO
OUT
MONITOR
DIGITAL (ASSIGNABLE)
C5V
7A MAX
HDMI
ANTENNA
MPORT
IN 4 IN 2
IN 3
AM
VIDEO 1
AUDIO
OUT
VIDEO
OUT
OPTICAL IN
AUDIO
IN
VIDEO
IN
AUDIO
IN
VIDEO
IN
BD
L
R
SAT IN BD IN DVD IN
OPTICAL COAXIAL
TV
L
R
L
R
FRONT A
SURROUND BACK/
FRONT B/
BI-AMP
R
AUDIO
OUT
SUBWOOFER
10 mm
SPEAKERS
SURROUND
CENTER
IN 1
(for AUDIO) OUT
ASSIGNABLE (INPUT ONLY)
L
H
A B
B
F
G
AMonaural audio cord (not supplied)
BSpeaker cord (not supplied)
E
B
C D
A
Page: 18
19GB
Getting
Started
a)
If you connect only one surround back speaker,
connect it to the SPEAKERS SURROUND
BACK/FRONT B/BI-AMP L terminals.
b)
If you are not using surround back speaker, and
you have an additional front speaker system,
connect the additional front speaker system to the
SPEAKERS SURROUND BACK/FRONT B/
BI-AMP terminals. Set “SB Assign” to “Speaker
B” in the Speaker Settings menu (page 66).
You can select the front speaker system you want
to use with SPEAKERS on the front panel
(page 37).
c)
If you are not using surround back speakers, you
can connect the front speakers to the SPEAKERS
SURROUND BACK/FRONT B/BI-AMP
terminals using a bi-amplifier connection
(page 105).
Set “SB Assign” to “BI-AMP” in the Speaker
Settings menu (page 66).
d)When you connect a subwoofer with an auto
standby function, turn off the function when
watching movies. If the auto standby function is
set to on, it turns to standby mode automatically
based on the level of the input signal to a
subwoofer, then sound may not be output.
Note
Before connecting the AC power cord (mains lead),
make sure that metallic wires of the speaker cords
are not touching each other between the
SPEAKERS terminals.
Page: 19
20GB
3: Connecting the TV
You can watch the selected input image when
you connect the HDMI OUT or MONITOR
OUT jack to a TV. You can operate this
receiver using a GUI (Graphical User
Interface) if you connect HDMI OUT jack or
COMPONENT VIDEO MONITOR OUT
jacks to a TV.
It is not necessary to connect all the cables.
Connect audio and video cords according to
the jacks of your components.
Before connecting cords, be sure to disconnect
the AC power cord (mains lead).
L
R
L
R
DIGITAL (ASSIGNABLE)
DC5V
0.7A MAX
ANTENNA
DMPORT
AM
OUT IN
SA-CD/CD/CD-R VIDEO 1
AUDIO
IN
VIDEO
IN
SAT
AUDIO
OUT
AUDIO
OUT
VIDEO
OUT
OPTICAL IN
AUDIO
IN
VIDEO
IN
SUBWOOFER
AUDIO
IN
VIDEO
IN
BD
L
R
L
R
SPEAKERS
SAT IN BD IN DVD IN
OPTICAL
CENTER
FRONT A
COAXIAL
SURROUND BACK/
FRONT B/
BI-AMP
TV
EZW-T100
L
R
SURROUND
Y
PB/
CB
PR/
CR
IN 2 IN 1 MONITOR
OUT
ASSIGNABLE (INPUT ONLY)
IN
TV
VIDEO
OUT
MONITOR
HDMI
IN 4
ASSIGNABLE (INPUT ONLY)
IN 2
IN 3 IN 1 OUT
(for AUDIO)
IN 3
COMPONENT VIDEO
TV
A B
AComponent video cord (not supplied)
BVideo cord (not supplied)
COptical digital cord (not supplied)
DAudio cord (not supplied)
EHDMI cable (not supplied)
Sony recommends that you use an HDMI-authorized cable or Sony HDMI cable.
Video signals
C D E
Audio signals Audio/video signals
Page: 20
21GB
Getting
Started
Notes
• Be sure to turn on the receiver when the video and
audio of a playback component are being output to
a TV via the receiver. If the power supply of the
receiver is not turned on, neither video nor audio is
transmitted.
• Connect image display components such as a TV
monitor or a projector to the HDMI OUT or
MONITOR OUT jack on the receiver. You may
not be able to record, even if you connect recording
components.
• Depending on the status of the connection between
the TV and the antenna (aerial), the image on the
TV screen may be distorted. In this case, place the
antenna (aerial) farther away from the receiver.
• When connecting optical digital cords, insert the
plugs straight in until they click into place.
• Do not bend or tie optical digital cords.
Tips
• The receiver has a video conversion function. For
details, see “Function for conversion of video
signals” (page 32).
• The sound of the TV is output from the speakers
connected to the receiver if you connect the audio
output jack of the TV to the TV IN jacks of the
receiver. In this configuration, set the sound output
jack of the TV to “Fixed” if it can be switched
between either “Fixed” or “Variable”.
Page: 21
22GB
4a: Connecting the audio components
The following illustration shows how to
connect a Super Audio CD player, CD player,
CD recorder and DIGITAL MEDIA PORT
adapter. Before connecting cords, be sure to
disconnect the AC power cord (mains lead).
After connecting your audio component,
proceed to “4b: Connecting the video
components” (page 24) or “5: Connecting the
antennas (aerials)” (page 34).
Connecting audio components
L
R
VIDEO
OUT
MONITOR
DIGITAL (ASSIGNABLE)
HDMI
ANTENNA
IN 4
ASSIGNABLE (INPUT ONLY)
IN 3
IN 2
IN 3 IN 1 OUT
AM
Y
PB/
CB
COMPONENT VIDEO
PR/
CR
IN 2 IN 1 MONITOR
OUT
VIDEO 1
IN
TV
AUDIO
IN
VIDEO
IN
SAT
AUDIO
OUT
AUDIO
OUT
VIDEO
OUT
OPTICAL IN
AUDIO
IN
VIDEO
IN
SUBWOOFER
AUDIO
IN
VIDEO
IN
BD
L
R
L
R
SPEAKERS
SAT IN BD IN DVD IN
OPTICAL
CENTER
FRONT A
COAXIAL
ASSIGNABLE (INPUT ONLY)
SURROUND BACK/
FRONT B/
BI-AMP
TV
EZW-T100
L
R
SURROUND
(for AUDIO)
R
SA-CD/CD/CD-R
DC5V
0.7A MAX
DMPORT
L
OUT IN
Super Audio CD player,
CD player, CD recorder
DIGITAL MEDIA
PORT adapter
AAudio cord (not supplied)
A
Page: 22
23GB
Getting
Started
Notes on connecting DIGITAL
MEDIA PORT adapter
• Do not connect or disconnect the DIGITAL
MEDIA PORT adapter while the receiver is
turned on.
• Be sure to make DMPORT connections
firmly, insert the connector straight in.
• As the connector of the DIGITAL MEDIA
PORT adapter is fragile, be sure to handle
with care when placing or moving the
receiver.
• When connecting the DIGITAL MEDIA
PORT adapter, be sure the connector is
inserted with the arrow mark facing towards
the arrow mark on the DMPORT jack. To
detach the DIGITAL MEDIA PORT
adapter, press and hold A and then pull out
the connector.
A
Page: 23
24GB
4b: Connecting the video components
This section describes how to connect your
video components to this receiver. Before you
begin, see “Component to be connected”
below for the pages which describe how to
connect each component. Before connecting
cords, be sure to disconnect the AC power
cord (mains lead).
After connecting all your components,
proceed to “5: Connecting the antennas
(aerials)” (page 34).
Component to be connected
If you want to connect several
digital components, but cannot
find an unused input
See “Enjoying the sound/images from other
inputs” (page 100).
The image quality depends on the connecting
jack. See the illustration that follows.
Select the connection according to the jacks on
your components.
Note
Be sure to turn on the receiver when the video and
audio of a playback component are being output to a
TV via the receiver. If the power supply of the
receiver is not turned on, neither video nor audio is
transmitted.
Converting video signals
This receiver is equipped with a function for
up-converting video signals. For details, see
“Function for conversion of video signals”
(page 32).
How to connect your
components
Component Page
TV 20
With HDMI jack 25
DVD player 28
Blu-ray disc player 29
Satellite tuner, Set-top box 30
DVD recorder, VCR 31
Camcorder, video game, etc. 31
Video input/output jacks to be
connected
HDMI
VIDEO
COMPONENT VIDEO
Y
PB/CB
PR/CR
Digital Analog
High quality image
Page: 24
25GB
Getting
Started
HDMI is the abbreviated name for High-
Definition Multimedia Interface. It is an
interface which transmits video and audio
signals in digital format.
Sony recommends that you connect
components to the receiver using an HDMI
cable.
With HDMI, you can easily enjoy both high
quality sound and high quality images.
However, it is necessary to connect
the audio output of the TV to the
audio input of the receiver using an
optical digital cord to listen to the
TV multi channel surround sound
broadcasting from the receiver.
By connecting Sony “BRAVIA” Sync
compatible components using HDMI cables,
““BRAVIA” Sync Features” makes
operations simpler (page 85).
Notes
• Be sure to change the factory setting of the HDMI
1–4 input button on the remote so that you can use
the button to control your components. For details,
see “Programming the remote” (page 109).
• You can also rename the HDMI input so that it can
be displayed on the receiver’s display. For details,
see “Naming the input (Name Input)” (page 48).
HDMI features
• A digital audio signals transmitted by HDMI
can be output from the speakers connected to
the receiver. This signal supports Dolby
Digital, DTS, and Linear PCM.
• The receiver can receive Multi Linear PCM
(up to 8 channels) with a sampling frequency
of 192 kHz or less with an HDMI
connection.
• Analog video signals input to the VIDEO
jack or COMPONENT VIDEO jacks can be
up-converted as HDMI signals. Audio
signals are not output from an HDMI OUT
jack when the image is converted.
• This receiver supports High Bitrate Audio
(DTS-HD Master Audio, Dolby TrueHD),
Deep Colour and x.v.Colour transmission,
extended by HDMI version 1.3.
• This receiver supports the Control for HDMI
function. For details, see ““BRAVIA” Sync
Features” (page 85).
• HDMI 3 input has a better sound quality.
When you need a higher sound quality,
connect your component to the HDMI IN 3
(for AUDIO) jack and select HDMI 3 as
input.
Connecting components with
HDMI jacks
continued
Page: 25
26GB
a)
Connect at least one of the audio cords (B or C).
L
R
VIDEO
OUT
MONITOR
L
R
DIGITAL (ASSIGNABLE)
DC5V
0.7A MAX
ANTENNA
DMPORT
IN 3
AM
Y
PB/
CB
COMPONENT VIDEO
OUT IN
PR/
CR
IN 2 IN 1 MONITOR
OUT
VIDEO 1
AUDIO
IN
VIDEO
IN
SAT
AUDIO
OUT
AUDIO
OUT
VIDEO
OUT
AUDIO
IN
VIDEO
IN
SUBWOOFER
AUDIO
IN
VIDEO
IN
BD
L
R
L
R
SPEAKERS
SAT IN BD IN DVD IN
OPTICAL
CENTER
FRONT A
COAXIAL
ASSIGNABLE (INPUT ONLY)
SURROUND BACK/
FRONT B/
BI-AMP
TV
EZW-T100
L
R
SURROUND
HDMI
IN 4
ASSIGNABLE (INPUT ONLY)
IN 2
IN 3 IN 1 OUT
IN
(for AUDIO)
OPTICAL IN
SA-CD/CD/CD-R TV
A
AHDMI cable (not supplied)
Sony recommends that you use an HDMI-authorized cable or Sony HDMI cable.
BAudio cord (not supplied)a)
COptical digital cord (not supplied)a)
DVD player
Audio/video
signals
Blu-ray disc player
Audio/video
signals
A
A
TV, projector, etc.
Audio/video
signals
Audio/video
signals
Satellite tuner, Set-top box
A
C
Audio signals
B
Page: 26
27GB
Getting
Started
Notes on connecting cables
• We recommend that you use an HDMI cable
with the HDMI logo (made by Sony) for the
HDMI jack corresponding to high speed (an
HDMI version 1.3a, category 2 cable) when
you view images or listen to sound during a
Deep Colour transmission or when you
watch a video image of 1080p or higher.
• We do not recommend using an HDMI-DVI
conversion cable. When you connect an
HDMI-DVI conversion cable to a DVI-D
component, the sound and/or the image may
not be output. Connect other audio cords or
digital connecting cords, then set “Input
Assign” in the Input Option menu when the
sound is not output correctly.
Notes on HDMI connections
• An audio signal input to the HDMI IN jack
is output from the SPEAKERS jacks and
HDMI OUT jack. It is not output from any
other audio jacks.
• A video signal input to the HDMI IN jack
can only be output from the HDMI OUT
jack. The video input signals cannot be
output from the VIDEO OUT jacks or
MONITOR OUT jacks.
• The audio and video signals of HDMI input
are not output from the HDMI OUT jack
while the receiver menu is displayed.
• When you want to listen to the sound from
the TV speaker, set “Audio Out” to
“TV+AMP” in the HDMI Settings menu
(page 74). If you cannot play back multi
channel audio source, set to “AMP”.
However, the sound will not output from the
TV speaker.
• DSD signals of Super Audio CD are not
input and output.
• Be sure to turn on the receiver when the
video and audio of a playback component
are being output to a TV via the receiver. If
the power supply of the receiver is not
turned on, neither video nor audio is
transmitted.
• Audio signals (sampling frequency, bit
length, etc.) transmitted from an HDMI jack
may be suppressed by the connected
component. Check the setup of the
connected component if the image is poor or
the sound does not come out of a component
connected via the HDMI cable.
• Sound may be interrupted when the
sampling frequency, the number of channels
or audio format of audio output signals from
the playback component is switched.
• When the connected component is not
compatible with copyright protection
technology (HDCP), the image and/or the
sound from the HDMI OUT jack may be
distorted or may not be output.
In this case, check the specification of the
connected component.
• You can enjoy High Bitrate Audio (DTS-HD
Master Audio, Dolby TrueHD), multi
channel Linear PCM only with an HDMI
connection.
• Set the image resolution of the playback
component to more than 720p to enjoy High
Bitrate Audio (DTS-HD Master Audio,
Dolby TrueHD).
• The image resolution of playback
component may need certain settings be
made before you can enjoy multi channel
Linear PCM. Refer to the operating
instructions of the playback component.
• Not every HDMI component supports all
functions that are defined by the specified
HDMI version. For example, components
that support HDMI, version 1.3a, may not
support Deep Colour.
• Refer to the operating instructions of each
connected component for details.
Page: 27
28GB
The following illustration shows how to
connect a DVD player.
It is not necessary to connect all the cords.
Connect audio and video cords according to
the jacks of your components.
Notes
• The COMPONENT VIDEO IN 2 jacks have been
assigned to the DVD player. If you connect your
DVD player to the COMPONENT VIDEO IN 1 or
IN 3 jacks, set “Input Assign” in the Input Option
menu (page 100).
• To input multi channel digital audio from the DVD
player, set the digital audio output setting on the
DVD player. Refer to the operating instructions
supplied with the DVD player.
• When connecting optical digital cords, insert the
plugs straight in until they click into place.
• Do not bend or tie optical digital cords.
Tip
All the digital audio jacks are compatible with
32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling
frequencies.
* When you connect a component equipped with an
OPTICAL jack, set “Input Assign” in the Input
Option menu.
Connecting a DVD player
L
R
VIDEO
OUT
MONITOR
L
R
DC5V
0.7A MAX
HDMI
ANTENNA
DMPORT
IN 4
ASSIGNABLE (INPUT ONLY)
IN 2
IN 3 IN 1 OUT
AM
OUT IN
SA-CD/CD/CD-R VIDEO 1
IN
TV
AUDIO
IN
VIDEO
IN
SAT
AUDIO
OUT
AUDIO
OUT
VIDEO
OUT
OPTICAL IN
AUDIO
IN
VIDEO
IN
SUBWOOFER
AUDIO
IN
VIDEO
IN
BD
L
R
L
R
SPEAKERS
CENTER
FRONT A
SURROUND BACK/
FRONT B/
BI-AMP
TV
EZW-T100
L
R
SURROUND
(for AUDIO)
DIGITAL
SAT IN BD IN DVD IN
OPTICAL COAXIAL
IN 3
Y
PB/
CB
PR/
CR
OUT
ASSIGNABLE (INPUT ONLY)
COMPONENT VIDEO
IN 1 MONITOR
(ASSIGNABLE)
IN 2
DVD player
A B
A Component video cord (not supplied)
B Optical digital cord (not supplied)
C Coaxial digital cord (not supplied)
C
Video signals Audio signals
Page: 28
29GB
Getting
Started
The following illustration shows how to
connect a Blu-ray disc player.
It is not necessary to connect all the cords.
Connect audio and video cords according to
the jacks of your components.
Notes
• The COMPONENT VIDEO IN 1 jacks have been
assigned to the Blu-ray disc player. If you connect
your Blu-ray disc player to the COMPONENT
VIDEO IN 2 or IN 3 jacks, set “Input Assign” in
the Input Option menu (page 100).
• To input multi channel digital audio from the Blu-
ray disc player, set the digital audio output setting
on the Blu-ray disc player. Refer to the operating
instructions supplied with the Blu-ray disc player.
• When connecting optical digital cords, insert the
plugs straight in until they click into place.
• Do not bend or tie optical digital cords.
Tip
All the digital audio jacks are compatible with
32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling
frequencies.
* When you connect a component equipped with an
COAXIAL jack, set “Input Assign” in the Input
Option menu.
Connecting a Blu-ray disc player
L
R
VIDEO
OUT
MONITOR
L
R
DC5V
0.7A MAX
ANTENNA
DMPORT
IN 4 IN 2
IN 3 IN 1 OUT
AM
OUT IN
SA-CD/CD/CD-R VIDEO 1
IN
TV
AUDIO
IN
VIDEO
IN
SAT
AUDIO
OUT
AUDIO
OUT
VIDEO
OUT
AUDIO
IN
VIDEO
IN
SUBWOOFER
L
R
L
R
SPEAKERS
CENTER
FRONT A
SURROUND BACK/
FRONT B/
BI-AMP
EZW-T100
L
R
SURROUND
(for AUDIO)
AUDIO
IN
BD
OPTICAL IN
TV
Y
PB/
CB
PR/
CR
MONITOR
OUT
ASSIGNABLE (INPUT ONLY)
IN 3
COMPONENT VIDEO
IN 2 IN 1
VIDEO
IN
SAT IN BD IN
OPTICAL
DVD IN
COAXIAL
DIGITAL (ASSIGNABLE)
ASSIGNABLE (INPUT ONLY)
HDMI
Blu-ray disc player
A
AComponent video cord (not supplied)
BVideo cord (not supplied)
CAudio cord (not supplied)
DOptical digital cord (not supplied)
ECoaxial digital cord (not supplied)
C
B
Video signals Audio signals
D E
Page: 29
30GB
The following illustration shows how to
connect a satellite tuner or set-top box.
It is not necessary to connect all the cords.
Connect audio and video cords according to
the jacks of your components.
Notes
• The COMPONENT VIDEO IN 3 jacks have been
assigned to the satellite tuner. If you connect your
satellite tuner to the COMPONENT VIDEO IN 1
or IN 2 jacks, set “Input Assign” in the Input
Option menu (page 100).
• When connecting optical digital cords, insert the
plugs straight in until they click into place.
• Do not bend or tie optical digital cords.
Tip
All the digital audio jacks are compatible with
32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling
frequencies.
Connecting a satellite tuner,
set-top box
L
R
VIDEO
OUT
MONITOR
L
R
DC5V
0.7A MAX
HDMI
ANTENNA
DMPORT
IN 4
ASSIGNABLE (INPUT ONLY)
IN 2
IN 3 IN 1 OUT
AM
OUT IN
SA-CD/CD/CD-R VIDEO 1
IN
TV
AUDIO
OUT
AUDIO
OUT
VIDEO
OUT
OPTICAL IN
AUDIO
IN
VIDEO
IN
SUBWOOFER
AUDIO
IN
VIDEO
IN
BD
L
R
L
R
SPEAKERS
CENTER
FRONT A
SURROUND BACK/
FRONT B/
BI-AMP
TV
EZW-T100
L
R
SURROUND
(for AUDIO)
AUDIO
IN
DIGITAL (ASSIGNABLE)
SAT IN BD IN DVD IN
OPTICAL COAXIAL
Y
PB/
CB
PR/
CR
MONITOR
OUT
ASSIGNABLE (INPUT ONLY)
IN 3
COMPONENT VIDEO
IN 2 IN 1
VIDEO
IN
SAT
B
A
Video signals Audio signals
C
Satellite tuner, Set-top box
D
AComponent video cord (not supplied)
BVideo cord (not supplied)
COptical digital cord (not supplied)
DAudio cord (not supplied)
Page: 30
31GB
Getting
Started
The following illustration shows how to
connect a component which has analog jacks
such as a DVD recorder, VCR, etc.
It is not necessary to connect all the cords.
Connect audio and video cords according to
the jacks of your components.
Notes
• Be sure to change the factory setting of the VIDEO
1 input button on the remote so that you can use the
button to control your DVD recorder. For details,
see “Programming the remote” (page 109).
• You can also rename the VIDEO 1 input so that it
can be displayed on the TV screen and display. For
details, see “Naming the input (Name Input)”
(page 48).
Connecting components with
analog video and audio jack
L
R
VIDEO
OUT
MONITOR
L
R
DIGITAL (ASSIGNABLE)
DC5V
0.7A MAX
HDMI
ANTENNA
DMPORT
IN 4
ASSIGNABLE (INPUT ONLY)
IN 3
IN 2
IN 3 IN 1 OUT
AM
Y
PB/
CB
COMPONENT VIDEO
OUT IN
PR/
CR
IN 2 IN 1 MONITOR
OUT
SA-CD/CD/CD-R
IN
TV
AUDIO
IN
VIDEO
IN
SAT
AUDIO
OUT
OPTICAL IN
AUDIO
IN
VIDEO
IN
BD
L
R
SPEAKERS
SAT IN BD IN DVD IN
OPTICAL
CENTER
FRONT A
COAXIAL
ASSIGNABLE (INPUT ONLY)
SURROUND BACK/
FRONT B/
BI-AMP
TV
EZW-T100
L
R
SURROUND
(for AUDIO)
AUDIO
OUT
AUDIO
IN
L
R
VIDEO 2 IN
VIDEO L AUDIO R
AUTO CAL MIC
SUBWOOFER
VIDEO 1
VIDEO
OUT
VIDEO
IN
DVD recorder, VCR
A
To the VIDEO 2 IN jacks (Front panel)
Camcorder,
video game
C
Audio signals Video signals
B
AAudio cord (not supplied)
BVideo cord (not supplied)
CAudio/video cord (not supplied)
continued
Page: 31
32GB
Function for conversion of video signals
This receiver is equipped with a function for converting video signals.
You can output the video signal after connecting this receiver via MONITOR OUT or HDMI OUT
jack as shown in the illustration below.
• Video signals can be output as HDMI video and component video signals.
• Component video signals can be output as HDMI video signals.
As the initial setting, video signals input from the connected component are output to the HDMI
OUT or MONITOR OUT jacks as shown in the table below.
We recommend you set the video conversion function to match the resolution of the monitor you
are using.
For details on the video converting function, see “Settings for the video (Video Settings menu)”
(page 72).
a : Video signals are up-converted and output through the video converter.
f : The same type of signal as that of the input signal is output. Video signals are not converted.
X : Video signals are not output.
L
R
L
R
DIGITAL (ASSIGNABLE)
DC5V
0.7A MAX
ANTENNA
DMPORT
AM
OUT IN
SA-CD/CD/CD-R
IN
TV
AUDIO
OUT
OPTICAL IN
SUBWOOFER
L
R
SPEAKERS
SAT IN BD IN DVD IN
OPTICAL
CENTER
FRONT A
COAXIAL
SURROUND BACK/
FRONT B/
BI-AMP
TV
EZW-T100
L
R
SURROUND
VIDEO 1
HDMI
IN 4
ASSIGNABLE (INPUT ONLY)
IN 2
IN 3 IN 1 OUT
(for AUDIO)
IN 3
Y
PB/
CB
COMPONENT VIDEO
PR/
CR
IN 2 IN 1 MONITOR
VIDEO 1
AUDIO
IN
VIDEO
IN
SAT
AUDIO
OUT
VIDEO
OUT
AUDIO
IN
VIDEO
IN
AUDIO
IN
VIDEO
IN
BD
L
R
ASSIGNABLE (INPUT ONLY)
OUT
VIDEO
OUT
MONITOR
Input Signals
Output Signals
B
A B
A B C
HDMI OUT COMPONENT
VIDEO
MONITOR OUT
MONITOR
VIDEO OUT
COMPONENT
VIDEO IN A
a f/a X
VIDEO IN B a a f
HDMI IN C f X X
INPUT jack
OUTPUT jack
Page: 32
33GB
Getting
Started
Notes on converting video
signals
• When video signals from a VCR, etc., are
converted on this receiver and then output to
your TV, depending on the status of the
video signal output, the image on the TV
screen may appear distorted horizontally or
no image may be output.
• HDMI video signals cannot be converted to
component video signals and video signals.
• When you play back a VCR with an image
improvement circuit, such as TBC, the
images may be distorted or may not be
output. In this case, set the image
improvement circuit function to off.
• The resolution of the signals output to the
COMPONENT VIDEO MONITOR OUT
jacks and HDMI OUT jack are converted up
to 1080i.
• COMPONENT VIDEO MONITOR OUT
jacks have restrictions on resolution when
the resolution of video signals protected by
copyright technology is converted.
Resolution of up to 480p can be output to the
COMPONENT VIDEO MONITOR OUT
jacks. The HDMI OUT jack has no
restriction on resolution.
• Video signals for which the resolution has
been converted cannot be output from either
the COMPONENT VIDEO MONITOR
OUT jacks or the HDMI OUT jack. The
video signals are output from the HDMI
OUT jack when both are connected.
To display Closed Caption
Set “Resolution” to “DIRECT” in the Video
Settings menu when receiving a signal that
supports Closed Captions.
Use the same type of cords for the input/output
signals.
To connect a recording
component
When recording, connect the recording
component to the VIDEO OUT jacks of the
receiver. Connect cords for input and output
signals to the same type of jack, as VIDEO
OUT jacks do not have an up-conversion
function.
Note
Signals output from the HDMI OUT or MONITOR
OUT jacks may not be recorded properly.
Page: 33
34GB
5: Connecting the antennas (aerials)
Connect the supplied AM loop antenna (aerial) and FM wire antenna (aerial).
Before connecting the antennas (aerials), be sure to disconnect the AC power cord (mains lead).
* The shape of the connector varies depending on the area code of this receiver.
Notes
• To prevent noise pickup, keep the AM loop antenna (aerial) away from the receiver and other components.
• Be sure to fully extend the FM wire antenna (aerial).
• After connecting the FM wire antenna (aerial), keep it as horizontal as possible.
L
R
VIDEO
OUT
MONITOR
L
R
DIGITAL (ASSIGNABLE)
DC5V
0.7A MAX
HDMI
ANTENNA
DMPORT
IN 4
ASSIGNABLE (INPUT ONLY)
IN 3
IN 2
IN 3 IN 1 OUT
AM
Y
PB/
CB
COMPONENT VIDEO
OUT IN
PR/
CR
IN 2 IN 1 MONITOR
OUT
SA-CD/CD/CD-R VIDEO 1
IN
TV
AUDIO
IN
VIDEO
IN
SAT
AUDIO
OUT
AUDIO
OUT
VIDEO
OUT
OPTICAL IN
AUDIO
IN
VIDEO
IN
SUBWOOFER
AUDIO
IN
VIDEO
IN
BD
L
R
L
R
SPEAKERS
SAT IN BD IN DVD IN
OPTICAL
CENTER
FRONT A
COAXIAL
ASSIGNABLE (INPUT ONLY)
SURROUND BACK/
FRONT B/
BI-AMP
TV
EZW-T100
L
R
SURROUND
L
R
VIDEO
OUT
MONITOR
L
R
DIGITAL (ASSIGNABLE)
DC5V
0.7A MAX
HDMI
ANTENNA
DMPORT
IN 4
ASSIGNABLE (INPUT ONLY)
IN 3
IN 2
IN 3 IN 1 OUT
AM
Y
PB/
CB
COMPONENT VIDEO
OUT IN
PR/
CR
IN 2 IN 1 MONITOR
OUT
SA-CD/CD/CD-R VIDEO 1
IN
TV
AUDIO
IN
VIDEO
IN
SAT
AUDIO
OUT
AUDIO
OUT
VIDEO
OUT
OPTICAL IN
AUDIO
IN
VIDEO
IN
SUBWOOFER
AUDIO
IN
VIDEO
IN
BD
L
R
L
R
SPEAKERS
SAT IN BD IN DVD IN
OPTICAL
CENTER
FRONT A
COAXIAL
ASSIGNABLE (INPUT ONLY)
SURROUND BACK/
FRONT B/
BI-AMP
TV
EZW-T100
L
R
SURROUND
(for AUDIO)
FM wire antenna (aerial) (supplied)
AM loop antenna (aerial) (supplied)
Page: 34
35GB
Getting
Started
6: Preparing the receiver
and the remote
(Models of area code E51 only)
If your receiver has a voltage selector on the
rear panel, check that the voltage selector is set
to the local power supply voltage. If not, use a
screwdriver to set the selector to the correct
position before connecting the AC power cord
(mains lead) to a wall outlet.
Depending on the models of area code, the
VOLTAGE SELECTOR may differ.
Connect the AC power cord (mains lead) to a
wall outlet.
Notes
• Before connecting the AC power cord (mains
lead), make sure that metallic wires of the speaker
cords are not touching each other between the
SPEAKERS terminals.
• Connect the AC power cord (mains lead) firmly.
Before using the receiver for the first time,
initialize the receiver by performing the
following procedure. This procedure can also
be used to return settings you have made to
their factory defaults.
Be sure to use the buttons on the receiver for
this operation.
1 Press ?/1 to turn off the
receiver.
2 Hold down ?/1 for 5 seconds.
After “CLEARING” appears on the
display for a while, “CLEARED!”
appears.
All the settings you have changed or
adjusted are reset to the initial settings.
Setting the voltage selector
Connecting the AC power cord
(mains lead)
120V
220V
240V
VOLTAGE SELECTOR
L
OUT
L
AC power cord (mains lead)
To the wall outlet
Performing initial setup
operations
MULTI CHANNEL DECODING
?/1
INPUT SELECTOR
MUTING
MASTER VOLUME
?/1
Page: 35
36GB
Insert two R6 (size-AA) batteries in the
RM-AAP042 remote commander.
Observe the correct polarity when installing
batteries.
Notes
• Do not leave the remote in an extremely hot or
humid place.
• Do not use a new battery with old ones.
• Do not mix manganese batteries and other kinds of
batteries.
• Do not expose the remote sensor to direct sunlight
or lighting apparatuses. Doing so may cause a
malfunction.
• If you do not intend to use the remote for an
extended period of time, remove the batteries to
avoid possible damage from battery leakage and
corrosion.
• When you replace the batteries, the programmed
remote codes may be cleared. If this happens,
program the remote codes again (page 109).
• When the remote no longer operates the receiver,
replace all the batteries with new ones.
7: Displaying the GUI
menu on the TV screen
You can select the functions or change the
settings of the receiver by using the GUI menu
on the TV screen. Follow the procedure below
to make the settings so that the GUI menu
appears on the TV screen.
Note
GUI menu does not appear on the TV screen when
you have connected your TV to the MONITOR
VIDEO OUT jack.
Tip
See “Operating without connecting to a TV” (page
75) if you want to operate the receiver without
connecting to a TV.
1 Connect a TV to this receiver.
See “3: Connecting the TV” (page 20).
2 Turn on the TV.
3 Press ?/1 to turn on the
receiver.
Inserting batteries into the
remote
1 2 3
4 5 6
7 8 9
-/-- 0/10 ENT/MEM
2CH/
A.DIRECT A.F.D. MOVIE MUSIC
THEATRE
SYSTEM STANDBY
RM SET UP
?/1
CLEAR/>10
SHIFT
RESOLUTION
VIDEO 1 VIDEO 2 BD
SAT TV
HDMI 3
HDMI 2
HDMI 1
HDMI 4
SA-CD/
CD DMPORT
TUNER
MENU
AV ?/1
RETURN/
EXIT
TOOLS/
OPTIONS
HOME
DISPLAY GUI MODE
O
DVD
INPUT
MODE SLEEP
NIGHT
MODE
TV AMP
?/1
GUI MODE
MENU
Page: 36
37GB
Getting
Started
4 Press GUI MODE.
After “MENU ON” appears on the
display for a while, “GUI” appears and
the GUI menu appears on the TV screen.
Press MENU if the GUI menu does not
appear on the TV screen.
To exit the menu
Press MENU.
8: Selecting the front
speaker system
You can select the front speakers you want to
drive.
Be sure to use the buttons on the receiver for
this operation.
Press SPEAKERS repeatedly to
select the front speaker system
you want to drive.
* To select “SP B” or “SP A + B”, set “SB Assign”
to “Speaker B” in the Speaker Settings menu (page
66).
To turn off the speaker output
Press SPEAKERS repeatedly until the “SP A”,
“SP B” or “SP A + B” indicators on the display
does not light up. “ALL OFF” appears on the
display for a while.
Note
You cannot switch the front speaker system by
pressing SPEAKERS when the headphones are
connected.
Input
Music
Video
VIDEO 1
VIDEO 2
BD
DVD
SAT
To select Light up
The front speakers connected to the
SPEAKERS FRONT A terminals
SP A
The front speakers connected to the
SPEAKERS SURROUND BACK/
FRONT B/BI-AMP terminals
SP B*
The front speakers connected to both
the SPEAKERS FRONT A and
SURROUND BACK/FRONT B/
BI-AMP terminals (parallel
connection)
SP A + B*
?/1
MASTER VOLUME
SPEAKERS
PHONES 2 CH/
A.DIRECT A.F.D. MOVIE MUSIC INPUT MODE DIMMER DISPLAY
VIDEO 2 IN
VIDEO L AUDIO R
AUTO CAL MIC
MULTI CHANNEL DECODING
INPUT SELECTOR
MUTING
SPEAKERS
continued
Page: 37
38GB
To set up front speakers B
1 Press GUI MODE.
After “MENU ON” appears on the
display for a while, “GUI” appears and
the GUI menu appears on the TV screen.
Press MENU if the GUI menu does not
appear on the TV screen.
2 Press V/v repeatedly to select
“Settings” then press or b.
The Settings menu list appears on the TV
screen.
3 Press V/v repeatedly to select
“Speaker”, then press or b.
4 Press V/v repeatedly to select
“SP Pattern”, then press or
b.
5 Press V/v repeatedly to select
the appropriate speaker pattern
so that there are no surround
back speakers, then press .
6 Press V/v repeatedly to select
“SB Assign”, then press or
b.
7 Press V/v repeatedly to select
“Speaker B”, then press .
The same signals output from the
SPEAKERS FRONT A terminals can be
output from the SPEAKERS
SURROUND BACK/FRONT B/
BI-AMP terminals.
To exit the menu
Press MENU.
Notes
• Set “SB Assign” to “Speaker B” before you
perform Auto Calibration.
• If you set “SB Assign” to “Speaker B”, the speaker
level and distance settings of the surround back
speakers become invalid, and those of the front
speakers are used.
• If you set “SP Pattern” to a setting with surround
back speakers, you cannot set “SB Assign” to
“Speaker B”.
2CH/
A.DIRECT A.F.D. MOVIE MUSIC
RESOLUTION
. >
< <
MENU
RETURN/
EXIT
TOOLS/
OPTIONS
HOME
DISPLAY GUI MODE
O
INPUT
MODE SLEEP
NIGHT
MODE
V/v/B/b,
GUI MODE
MENU
Page: 38
39GB
Getting
Started
9: Calibrating the
appropriate speaker
settings automatically
(Auto Calibration)
This receiver is equipped with DCAC (Digital
Cinema Auto Calibration) function which
allows you to perform automatic calibration to
measure the following:
• Speaker connectionsa)
• Polarity of speakers
• Speaker distancea)
• Speaker sizea)
• Speaker level
• Frequency characteristicsa)b)
a)
The measurement result is not utilized when the
“Analog Direct” is selected.
b)
• Signals with a sampling frequency of higher than
96 kHz are always played back at either 44.1 kHz
or 48 kHz.
• The measurement result is not utilized when
Dolby TrueHD signals with a sampling
frequency of higher than 96 kHz are being
received.
The DCAC is designed to obtain proper sound
balance in your room. However, you can
adjust the speaker levels and balance manually
according to your preference. For details, see
“Test Tone (Test tone)” (page 68).
Before you perform the Auto Calibration, set
up and connect the speakers (page 16–18).
• The AUTO CAL MIC jack is used for the
supplied optimizer microphone only. Do not
connect other microphones to this jack.
Doing so may damage the receiver and the
microphone.
• During the measurement, the sound that
comes out of the speakers is very loud. The
volume of the sound cannot be adjusted. Pay
attention to the presence of children or to the
effect on your neighborhood.
• Perform the measurement in a quiet
environment to avoid the effect of noise and
get a more accurate measurement.
• If there are any obstacles in the path between
the optimizer microphone and the speakers,
the calibration cannot be performed
correctly. Remove any obstacles from the
measurement area to avoid measurement
error.
• When you use a bi-amplifier connection, set
“SB Assign” to “BI-AMP” in the Speaker
Settings menu (page 66) before you perform
Auto Calibration.
• When you use front speakers B connection,
set “SB Assign” to “Speaker B” in the
Speaker Settings menu (page 66) before you
perform Auto Calibration.
• If you want to use surround amplifier, be
sure to pair the surround amplifier to S-AIR
main unit before you perform Auto
Calibration (page 93).
• Select the seating position as position 1, 2 or
3 to save the Auto Calibration result (page
65).
Notes
• The Auto Calibration function does not work in the
following cases.
– Headphones are connected
– SPEAKERS is set to off.
• If you activate the muting function during Auto
Calibration, the muting function will automatically
be set to off.
Before you perform Auto
Calibration
continued
Page: 39
40GB
1 Connect the supplied optimizer
microphone to the AUTO CAL
MIC jack.
2 Set up the optimizer
microphone.
Place the optimizer microphone at your
listening position. Use a stool or tripod so
that the optimizer microphone remains at
the same height as your ears.
On setting up the active
subwoofer
• When a subwoofer is connected, turn on the
subwoofer and turn up the volume
beforehand. Turn the MASTER VOLUME
to just before the mid-point.
• If you connect a subwoofer with a crossover
frequency function, set the value to
maximum.
• If you connect a subwoofer with an auto
standby function, set it to off (deactivated).
Note
Depending on the characteristics of the subwoofer
you are using, the setup distance value may be
further away from the actual position.
1 Press GUI MODE.
After “MENU ON” appears on the
display for a while, “GUI” appears and
the GUI menu appears on the TV screen.
Press MENU if the GUI menu does not
appear on the TV screen.
2 Press V/v repeatedly to select
“Settings”, then press or b.
The Settings menu list appears on the TV
screen.
?/1
MASTER VOLUME
SPEAKERS
PHONES 2 CH/
A.DIRECT A.F.D. MOVIE MUSIC INPUT MODE DIMMER DISPLAY
VIDEO 2 IN
VIDEO L AUDIO R
AUTO CAL MIC
MULTI CHANNEL DECODING
INPUT SELECTOR
MUTING
AUTO CAL MIC
Optimizer microphone
Performing Auto Calibration
1 2 3
4 5 6
7 8 9
-/-- 0/10 ENT/MEM
2CH/
A.DIRECT A.F.D. MOVIE MUSIC
THEATRE
SYSTEM STANDBY
RM SET UP
?/1
CLEAR/>10
SHIFT
TUNING – TUNING +
DISC SKIP D.TUNING
RESOLUTION
.
m M
>
X x
MUTING
VIDEO 1 VIDEO 2 BD
SAT TV
HDMI 3
HDMI 2
HDMI 1
HDMI 4
SA-CD/
CD DMPORT
TUNER
TV VOL
MASTER VOL
TV CH
PRESET
< <
MENU
AV ?/1
RETURN/
EXIT
TOOLS/
OPTIONS
HOME
DISPLAY GUI MODE
O
DVD
INPUT
MODE SLEEP
NIGHT
MODE
TV AMP
V/v/b,
GUI
MODE
MENU
MASTER
VOL +/–
Input
buttons
?/1 switch
MUTING
Page: 40
41GB
Getting
Started
3 Press V/v repeatedly to select
“Auto Cal.”, then press or b.
4 Press V/v repeatedly to select
“Auto Cal. Start”, then press
or b.
5 Press to select “START”.
6 The measurement starts in five
seconds.
7 Measurement starts.
The measurement process will take
approximately 30 seconds with a test
tone. Wait until the measurement process
completes.
Tip
The measurements may not be performed correctly
or Auto Calibration cannot be performed when
special speakers, such as dipole speakers are used.
To cancel the measurement
The measurement will be canceled when you
do the following:
– Press ?/1.
– Press the input buttons on the remote or
press the INPUT SELECTOR +/–
repeatedly on the receiver.
– Press MUTING.
– Press SPEAKERS on the receiver.
– Change the volume level.
– Connect the headphones.
1 Confirm the measurement
result.
When the measurement ends, a beep
sounds.
2 Press V/v repeatedly to select
the item you want, then press
.
Count Down
Please press enter key
to stop.
5
Auto Calibration
RETURN
CANCEL
Auto Calibration
TONE T.S.P. WOOFER
Confirming/saving the
measurement results
Item Explanation
Retry Performs the AutoCalibration
again.
Save Saves the measurement
results and exits the setting
process.
Warning Displays warning concerning
the measurement results. See
“Message list after Auto
Calibration measurement”
(page 43).
Phase* Displays the phase of each
speaker (in phase/out of
phase).
Auto Calibration
Save
continued
Page: 41
42GB
* When the speaker(s) is (are) out of the phase,
“OUT” is displayed on the TV screen. The
“+” and “–” terminals of the speaker may be
connected the other way around.
However, depending on the speakers, “OUT”
appears on the TV screen even though the
speakers are connected properly. This is
because of the speakers’ specifications. In
this case, you can continue to use the
receiver.
3 Select “Save” in step 2 to save
the measurement result.
4 Press V/v repeatedly to select
the Auto Calibration Type, then
press .
Tip
The size of a speaker (“Large”/“Small”) is
determined by the low frequency characteristics.
The measurement results may vary, depending on
the position of the optimizer microphone and
speakers, and the shape of the room. It is
recommended that you follow the measurement
results. However, you can change those settings in
the Speaker Settings menu. Save the measurement
results first, then try to change the settings if you
want.
Distance Displays the measurement
result for speaker distance.
Level Displays the measurement
result for speaker level.
Exit Exits the setting process
without saving the
measurement results.
Parameter Explanation
Full Flat Makes the measurement of
frequency from each speaker
flat.
Engineer Sets the frequency to one that
matches that of the Sony
listening room standard.
Front
Reference
Adjusts the characteristics of
all the speakers to match the
characteristics of the front
speaker.
Off Sets the Auto Calibration to
off.
Item Explanation
Auto Cal. Type
Engineer
Front Reference
Off
Auto Calibration
RETURN
Full Flat
Page: 42
43GB
Getting
Started
Error Code 31, 32, 33
1 When you press , “RETRY?” appears.
2 Press B/b to select “YES”.
3 Press .
The measurement starts in five seconds.
When “Warning” appears
If a warning on the measurement result is
present, detailed information is displayed.
Press to return to step 1 of “Confirming/
saving the measurement results” (page 41).
Tip
Depending on the position of the subwoofer, the
measurement results for polarity may vary.
However, there will be no problems even if you
continue to use the receiver with that value.
Message list after Auto Calibration measurement
Error and
warning code
Explanation
Error Code 31 The SPEAKERS is set to off. Set it to others and perform the Auto Calibration again.
Error Code 32 None of the speakers were detected. Make sure that the optimizer microphone is connected
properly and perform the measurement again.
If the optimizer microphone is connected properly but the error code appears, the optimizer
microphone cable may be damaged or improperly connected.
Error Code 33 • None of the front speakers are connected or only one front speaker is connected.
• The optimizer microphone is not connected.
• Either the left or right surround speakers is not connected.
• Surround back speakers are connected even though surround speakers are not connected.
Connect the surround speaker(s) to the SPEAKERS SURROUND terminals.
• The surround back speaker is connected only to the SPEAKERS SURROUND BACK/
FRONT B/BI-AMP R terminals. When you connect only one surround back speaker,
connect it to the SPEAKERS SURROUND BACK/FRONT B/BI-AMP L terminals.
Warning 40 The measurement has completed. However, the noise level is high. You may be able to
perform the measurement properly if you try it again, even though the measurement cannot
be performed in all environments. Try to perform the measurement in a quiet environment.
Warning 41
Warning 42
The input from the microphone is too big.
• It may be the distance between the speaker and the microphone are too close.
Retry the measurement after setting apart from each other.
Warning 43 The distance and position of a subwoofer cannot be detected. This may be caused by noise.
Try to perform the measurement in a quiet environment.
NO WARNING There is no warning information.
Page: 43
44GB
Guide to on-screen
display operation
You can display the menu of the receiver on
the TV screen and select the function you want
to use on the TV screen by pressing V/v/B/b
and on the remote.
To display the menu of the receiver on the TV
screen, make sure that the receiver is in “GUI
MODE” following the steps in “7: Displaying
the GUI menu on the TV screen” (page 36).
1 Press GUI MODE.
After “MENU ON” appears on the
display for a while, “GUI” appears and
the GUI menu appears on the TV screen.
Press MENU if the GUI menu does not
appear on the TV screen.
2 Press V/v repeatedly to select a
menu you want.
3 Press or b to enter the
menu.
The menu item list appears on the TV
screen.
4 Press V/v repeatedly to select
the menu item you want to
adjust.
5 Press or b to enter the
menu item.
6 Press V/v repeatedly to select
the parameter you want to
adjust.
7 Press or b to enter the
parameter.
Using the menu
2CH/
A.DIRECT A.F.D. MOVIE MUSIC
RESOLUTION
. >
< <
MENU
RETURN/
EXIT
TOOLS/
OPTIONS
HOME
DISPLAY GUI MODE
O
INPUT
MODE SLEEP
NIGHT
MODE
V/v/b,
GUI MODE
MENU
TOOLS/
OPTIONS
RETURN/
EXIT O
FM
FM
AM
AM
Setting
Auto Cal.
Speaker
Surround
EQ
Audio
Setting
Auto Cal.
Speaker
Surround
EQ
Audio
Main/Sub
Dec. Priority:
Dual Mono:
Audio Settings
RETURN
0 ms
A/V Sync:
30 ms
A/V Sync:
20 ms
10 ms
Dec. Priority:
Dual Mono:
Audio Settings
RETURN
0 ms
Page: 44
45GB
Getting
Started
8 Press V/v repeatedly to select
the setting you want.
9 Press to enter the setting.
10Repeat steps 2 to 9 to make
other settings.
To return to the previous screen
Press RETURN/EXIT O.
To exit the menu
Press MENU.
To exit “GUI MODE”
Press GUI MODE. “MENU OFF” appears and
you can operate the receiver using the menu in
the display of the receiver.
Overview of the main menus
When you press TOOLS/OPTIONS, the
option menu for the selected main menu are
displayed. You can select a related function
without reselecting the menu.
1 Press GUI MODE.
After “MENU ON” appears on the
display for a while, “GUI” appears and
the GUI menu appears on the TV screen.
Press MENU if the GUI menu does not
appear on the TV screen.
2 Press V/v repeatedly to select a
menu you want.
3 Press or b to enter the
menu.
The menu item list appears on the TV
screen.
Example: when you select “Input”.
Menu icon Description
Input Selects the input source
component connected to the
receiver (page 46).
Music Selects the music from the
audio component connected
to the DIGITAL MEDIA
PORT adapter (page 48).
Video Selects the images from the
video components connected
to the DIGITAL MEDIA
PORT adapter (page 48).
FM/AM Selects the built-in FM/AM
radio (page 51).
Settings You can adjust the settings of
the speakers, the surround
effect,equalizer,audio, video
and other inputs connected to
the HDMI jacks (page 63).
Using the option menu
Input
Music
Video
VIDEO 1
VIDEO 2
BD
DVD
SAT
Input
VIDEO 1
VIDEO 2
DVD
SAT
BD
continued
Page: 45
46GB
4 Press TOOLS/OPTIONS while
the menu item list is displayed.
The option menu appears.
5 Press V/v repeatedly to select
the option menu item you want,
then press or b.
6 Press V/v repeatedly to select
the parameter you want, then
press .
To exit the menu
Press MENU.
Enjoying sound/images
from the component
connected to the receiver
1 Press GUI MODE.
After “MENU ON” appears on the
display for a while, “GUI” appears and
the GUI menu appears on the TV screen.
Press MENU if the GUI menu does not
appear on the TV screen.
Input
VIDEO 1
VIDEO 2
DVD
SAT
BD Name lnput
Input Assign
Playback
1 2 3
4 5 6
7 8 9
-/-- 0/10 ENT/MEM
2CH/
A.DIRECT A.F.D. MOVIE MUSIC
THEATRE
SYSTEM STANDBY
RM SET UP
?/1
CLEAR/>10
SHIFT
TUNING – TUNING +
DISC SKIP D.TUNING
RESOLUTION
.
m M
>
X x
MUTING
VIDEO 1 VIDEO 2 BD
SAT TV
HDMI 3
HDMI 2
HDMI 1
HDMI 4
SA-CD/
CD DMPORT
TUNER
TV VOL
MASTER VOL
TV CH
PRESET
< <
MENU
AV ?/1
F1 F2
TV INPUT
TOP MENU MENU
BD/DVD
WIDE
RETURN/
EXIT
TOOLS/
OPTIONS
HOME
DISPLAY GUI MODE
O
DVD
INPUT
MODE SLEEP
NIGHT
MODE
TV AMP
V/v/B/b,
GUI MODE
MENU
TOOLS/
OPTIONS
MUTING MASTER
VOL +/–
Input
buttons
?/1 switch
RETURN/
EXIT O
Page: 46
47GB
Playback
2 Press V/v repeatedly to select
“Input”, then press or b.
The menu item list appears on the TV
screen.
3 Press V/v repeatedly to select
the component you want, then
press .
4 Turn on the component and
start playback.
5 Press MASTER VOL +/– to
adjust the volume.
You can also use MASTER VOLUME on
the receiver.
Tips
• You can press INPUT SELECTOR +/– on the
receiver repeatedly or press input buttons on the
remote to select the component you want.
• You can adjust the volume differently depending
on the speed with which you turn the MASTER
VOLUME on the receiver.
To turn the volume up or down quickly: turn the
knob quickly.
To make fine adjustment: turn the knob slowly.
• You can adjust the volume differently depending
on the length of time you press and hold the
MASTER VOL +/– button on the remote.
To turn the volume up or down quickly: press and
hold the button.
To make a fine adjustment: press the button and
release it immediately.
To activate the muting function
Press MUTING.
The muting function will be canceled when
you do the following.
• Press MUTING again.
• Increase the volume.
• Turn off the receiver.
To avoid damaging your
speakers
Before you turn off the receiver, be sure to turn
down the volume level.
Selected input Components that can
be played back
VIDEO 1 VCR, etc., connected to the
VIDEO 1 jack
VIDEO 2 Camcorder, video game,
etc., connected to the
VIDEO 2 IN jack
BD Blu-ray disc player, etc.,
connected to the BD jack
DVD DVD player, etc.,
connected to DVD jack
SAT Satellite tuner, set-top box,
etc., connected to SAT jack
TV TV, etc., connected to TV
jack
SA-CD/CD/
CD-R
Super Audio CD player,
CD player, etc., connected
to the SA-CD/CD/CD-R
jack
HDMI 1, 2, 3, 4 HDMI components
connected to the HDMI IN
1, HDMI IN 2, HDMI IN 3
(for AUDIO) or HDMI IN
4 jack
Page: 47
48GB
You can enter a name of up to 8 characters for
inputs and display it.
This is convenient for labeling the jacks with
the names of the connected components.
1 Press V/v repeatedly on the
“Input” screen to select the
input you want.
2 Press TOOLS/OPTIONS.
3 Press V/v repeatedly to select
“Name Input”, then press .
4 Press V/v/B/b to select a
character, then press .
The name you entered is registered.
To cancel naming input
Press RETURN/EXIT O.
Enjoying sound/images
from the components
connected to the DIGITAL
MEDIA PORT
The DIGITAL MEDIA PORT (DMPORT)
allows you to enjoy picture and sound from a
network system such as a portable audio/video
source or computer.
For details on connecting the DIGITAL
MEDIA PORT adapter, see “Connecting
audio components” (page 22).
Sony offers the following DIGITAL MEDIA
PORT adapters as of May 2009:
• TDM-BT1/BT10 Bluetooth™ Wireless
Audio Adapter
• TDM-NW10 DIGITAL MEDIA PORT
Adapter
• TDM-NC1 Wireless Network Audio Client
• TDM-iP10/iP50 DIGITAL MEDIA PORT
Adapter
• TDM-MP10 DIGITAL MEDIA PORT
Adapter
The DIGITAL MEDIA PORT adapter is an
optional product.
Notes
• Do not connect an adapter other than the DIGITAL
MEDIA PORT adapter to the DMPORT jack.
• Before disconnecting the DIGITAL MEDIA
PORT adapter, be sure to turn off the receiver.
• Do not connect or disconnect the DIGITAL
MEDIA PORT adapter while the receiver is turned
on.
• Depending on the type of DIGITAL MEDIA
PORT adapter, video output may not be possible.
• The DIGITAL MEDIA PORT adapters are
available for purchase depending on the area.
Naming the input (Name Input)
Input
VIDEO 1
VIDEO 2
DVD
SAT
BD
Input Assign
Name lnput
Page: 48
49GB
Playback
You can select an operation screen using the
GUI menu, depending on the DIGITAL
MEDIA PORT adapter you want to use. For
some adapter, such as TDM-BT1, the
operation screen is fixed and you cannot
change it on the GUI screen.
1 Press GUI MODE.
After “MENU ON” appears on the
display for a while, “GUI” appears and
the GUI menu appears on the TV screen.
Press MENU if the GUI menu does not
appear on the TV screen.
2 Press V/v repeatedly to select
“Music” or “Video”, then press
or b.
3 Press TOOLS/OPTIONS.
4 Press V/v repeatedly to select
the mode you want, then press
.
The details of each mode are as follows:
• System GUI
This mode is for the TDM-iP50 and
TDM-NC1. The list of tracks will be
displayed on the GUI screen of the
receiver. You can select a track you
want and play it back on each GUI
screen.
• iPod
This mode is for the TDM-iP50.
If the option menu does not appear on the
screen, refer to the operating instructions
of the connected component.
When an adapter other than iPod is
connected, a hierarchical menu does not
appear.
To operate the TDM-iP50 or
TDM-NC1 using the GUI menu of
the receiver
1 Make sure that “System GUI” is
selected in step 4 in “Selecting
the operation screen” (page
49).
2 Press V/v/B/b repeatedly to
select the content you want
from the contents list displayed
on the GUI screen, press to
play it back.
Selecting the operation screen
2CH/
A.DIRECT A.F.D. MOVIE MUSIC
RESOLUTION
. >
< <
MENU
RETURN/
EXIT
TOOLS/
OPTIONS
HOME
DISPLAY GUI MODE
O
INPUT
MODE SLEEP
NIGHT
MODE
V/v/b,
GUI MODE
MENU
TOOLS/
OPTIONS
Operating the component
connected to the DIGITAL MEDIA
PORT adapter
MENU
RETURN/
EXIT
TOOLS/
OPTIONS
HOME
DISPLAY GUI MODE
O
V/v/B/b,
continued
Page: 49
50GB
Contents list for audio
a)
Displayed only when M-crew Server is connected.
b)
Displayed only when a DLNA server other than
M-crew Server is connected.
c)
Displayed as “Genre”, “Artist” or “Album”,
depending on setting of “List Mode”.
Contents list for video
To operate the TDM-iP50 using
the iPod menu
Make sure that “iPod” is selected in step 4 in
“Selecting the operation screen” (page 49).
For details on operating the iPod, refer to the
operating instructions supplied with the iPod.
During playback of the selected track, the
displayed screen changes depending on the
DIGITAL MEDIA PORT adapter connected.
You can operate the components connected to
the DIGITAL MEDIA PORT adapter using the
following buttons on the remote of the
receiver.
* Fast-backward/forward while pressing and
holding the m/M button.
iPod Playlists > Playlist > Track
Artists > Artist > Album > Track
Albums > Album > Track
Songs > Track
Genres > Genre > Artist > Album > Track
Composers > Composer > Track
Audiobooks > Audiobook
Network Client Music Surfina) > Albumc) > Track
Playlista)
> Playlist > Track
Web Radioa)
> Station > Program
Music Libraryb)
> Album > Track
iPod Movies > Content
TV Shows > Episode > Content
Music Videos > Artist > Content
Video Playlists > Video Playlist > Content
Video Podcasts > Episode > Content
Playing the selected track
To Do the following
Play Press N.
Pause Press X. To resume play,
press the button again.
Stop Press x.
Find the beginning of a
track during playback, or
find the beginning of the
previous track
Press ..
Find the beginning of the
next track
Press >.
Skip to the previous
album
Press B•.
Skip to the next album Press •b.
Go backward/forward Press m/M.*
Music Player
RETURN OPTIONS
Title Sample
0:17
1/1
Artist Sample
Album Sample
Example of a “System GUI” screen
TUNING – TUNING +
DISC SKIP D.TUNING
.
m M
>
X x
TV VOL
MASTER VOL
TV CH
PRESET
< < ./>
m/M
x
X
B•/•b
N

Question & answers

needed power button crkt board.

Published on 2 years ago by Mike

Ask a question about the Sony STR-DN1000

Have a question about the Sony STR-DN1000 but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Sony STR-DN1000. Please make sure that you describe your difficulty with the Sony STR-DN1000 as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.