Sony SDM-G96X manual

View a manual of the Sony SDM-G96X below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Sony
  • Product: Monitor
  • Model/name: SDM-G96X
  • Filetype: PDF
  • Available languages: Dutch, English, German, French, Spanish, Italian, Swedish, Portuguese, Polish, Turkish, Hungarian

Table of Contents

Page: 0
2-687-509-03(1)
© 2006 Sony Corporation
SDM-G76X
SDM-G96X
Page: 2
3 (JP)
• Macintosh Apple Computer,
Inc.
• Windows®
Microsoft
Corporation
• VESA DDC™
Video
Electronics Standards
Association
• Adobe Acrobat Adobe
Systems Incorporated
• ENERGY STAR®
•
• ® ™
http://www.sony.co.jp/
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2 . . . . . . . . . . . . . . . . . . . . . . . 8
3 . . . . . . . . . . . . . . . . . . . . . . . . . 9
4 . . . . . . . . . . . . . . . . . . . . . . . . . 9
5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
. . . . . . . . . . . . . . . . . . . . . . . . 10
INPUT . . . . . . . . . . . . . . . . 11
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
. . . . . . . . . . . . . . . . . . . . . 12
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
AUDIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
RGB . . . . . . . . . . . 16
. . . . . . . . . . 18
. . . . . . . . . . 18
LANGUAGE . . . . . . . . . . . . . . 18
0 . . . . . . . . . . . . . . 19
. . . . 19
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
. . . . . . . . . . . . . . . . . . . . . 20
RGB . . . . . . . . . . . . 21
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
. . . . . . . . . . . . . . . . . . . . . . . . . . . 21
. . . . . . . . . . . . . . . . . . . . . . . . . 23
. . . . . . . . . . . . . . . . . . . . . . . . . .25
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
. . . . . . . . . . . . . . . . . . . . . . . . . 25
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Page: 4
5 (JP)
•
•
•
•
http://www.sony.co.jp/pcrecycle/
0570 000-369
PHS 03 3447-9100
10 00 17 00
http://www.sony.co.jp/SonyInfo/
pcrecycle/personal/kateikei.html
http://www.sony.co.jp/
SonyInfo/pcrecycle/business/jigyoukei.html
Page: 5
6 (JP)
1
A 1 9 20
1
/
B MENU 12
8 DDC/CI
C m/M w 12
20
D OK 12
/
E 12
F INPUT 11
G 20
/
Page: 6
7 (JP)
H
I 9
J INPUT1/INPUT2 9
INPUT1 INPUT2
K INPUT1 DVI-D RGB
8
DVI Rev.1.0 RGB
L INPUT2 HD15 RGB
RGB 8
RGB 0.7 Vp-p
M 20
Page: 10
11 (JP)
INPUT
INPUT
5
1 DVI-D INPUT1 DVI-D
RGB
2 HD15 INPUT2 HD15
RGB
Page: 12
13 (JP)
x
19
x
MENU 5
MENU 5
3
DDC/CI Display Data Channel Command Interface
• GAME/
MOVIE/PC/
•
• 6
•
•
•
•
• 0
x
I N P U T
INPUT1/INPUT2
1 MENU
2 m/M OK
3 m/M MOVIE OK
MODE
4 m/M OK
MOVIE
• GAME
• MOVIE
• PC
•
x
1 MENU
2 m/M OK
3 m/M
OK
4 m/M OK
x
sRGB
1 MENU
2 m/M OK
3 m/M 6 OK
4 m/M OK
DDC-CI : ON
DDC-CI : OFF
6
1 2 8 0 1 0 2 4
1 0 0
:
7 0
:
5 0
:
6 0 H z
x /
M O V I E
MODE
GAME
MOVIE
PC
1 2 8 0 1 0 2 4 6 0 H z
x /
Page: 13
14 (JP)
x
sRGB
1 MENU
2 m/M OK
3 m/M OK
4 m/M OK
x
1 MENU
2 m/M OK
3 m/M OK
4 m/M OK
9300K 6500K
sRGB sRGB
sRGB
sRGB
sRGB
• sRGB
sRGB
• sRGB
GAME/MOVIE/PC/
1 m/M OK
2 m/M R Red B Blue
OK m/M
OK
G Green R B
G
3 m/M OK
x
sRGB
1 MENU
2 m/M OK
3 m/M OK
4 m/M OK
1 2 8 0 1 0 2 4 6 0 H z
x /
9 3 0 0 K
6 5 0 0 K
sRGB
M O V I E
R
G
B
1 2 8
1 2 8
1 2 8
1 2 8 0 1 0 2 4 6 0 H z
x /
1 2 8 0 1 0 2 4 6 0 H z
x /
M O V I E
Page: 15
16 (JP)
3 m/M 0 OK
4 m/M OK
• OK AUDIO
• AUDIO
RGB
•
•
•
•
•
x
/
21
1
/ /
/ /
x
1 MENU
2 m/M OK
3 m/M OK
4 m/M OK
•
•
5 m/M OK
x
/ / /
HD15
RGB
1 1,280 1,024
2 CD-ROM
3 CD-ROM
Windows
CD-ROM
UTILITY
4 [Adjust]
[Next]
5 MENU
6 m/M OK
7 m/M OK
INPUT1 DVI-D RGB
1 2 8 0 1 0 2 4 6 0 H z
x /
Page: 16
17 (JP)
8 m/M
9 OK
10 [Next]
11 m/M OK
12 m/M
13 OK
14 [Next]
15 m/M
OK
16 m/M
17 [Next] [End] [ ]
CD-ROM
1 CD-ROM
CD-ROM
2 [Utility] [WINDOWS]
3 [WIN_UTILITY.EXE]
4
Macintosh
1 CD-ROM
2 [Utility] [MAC]
3 [MAC UTILITY] [MAC_CLASSIC_UTILITY]
[MAC_OSX_UTILITY]
4
4 MENU
5 m/M OK
6 m/M OK
7 m/M
8 OK
9 m/M OK
10 m/M
11 OK
12 m/M
OK
13 m/M
14 [END]
Page: 19
20 (JP)
1 m/M
2 m/M
5
•
•
VESA NUTEK ENERGY STAR
DPMS (Display Power Management Standard)
DMPM DVI Digital Monitor Power
Management
SDM-G76X
SDM-G96X
*
No Input Signal
5
** EPA Environmental Protection
Agency
3 0
,
1
50 W
*
**
1.0 W
1 1.0 W
1
53 W
*
**
1.0 W
1 1.0 W
Page: 20
21 (JP)
RGB
/
28 80 kHz
56 75 Hz
16
• 1
•
OUT OF RANGE
xxx.x kHz / xxx Hz
/
RESOLUTION > 1280 1024
1,280 1,024
NO INPUT SIGNAL
GO TO POWER SAVE
5
OUT OF RANGE
I NPUT 1 : DV I –D
x x x . x kHz / x x xHz
I NFORMAT I ON
I NFORMAT I ON
NO I NPUT S I GNAL
GO TO POWER SAVE
I NPUT 1 : DV I –D
Page: 21
22 (JP)
CABLE DISCONNECTED
GO TO POWER SAVE
45
CABLE D I SCONNECTED
I NFORMAT I ON
I NPUT 1 : DV I –D
GO TO POWER SAVE
Page: 22
23 (JP)
1
1
1
•
CABLE
DISCONNECTED
• 8
•
• 11
•
CABLE DISCONNECTED
NO INPUT SIGNAL
1
• 8
•
• 11
x
•
•
• OS
•
•
•
OUT OF RANGE x
•
28 80 kHz RGB 28 64 kHz RGB
56 75 Hz RGB 60 Hz RGB
1280 1024
•
OS
Windows •
Windows SONY
SDM-G76X SDM-G96X
Macintosh • Macintosh Macintosh
• RGB 21
•
x
•
• VESA Macintosh19
•
Page: 24
25 (JP)
•
•
• 3
b
b
b
b
8
SDM-G76X SDM-G96X
This display is designed for use in Japan only and
cannot be used in any other country.
TEL.
TEL.
Page: 26
2-687-509-03(1)
© 2006 Sony Corporation
TFT LCD Color
Computer Display
SDM-G76X
SDM-G96X
Operating Instructions (GB)
Page: 27
2 (GB)
Owner’s Record
The model and serial numbers are located at the rear of the unit.
Record these numbers in the spaces provided below. Refer to them
whenever you call upon your dealer regarding this product.
Model No. Serial No.
To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture.
Dangerously high voltages are present inside the
unit. Do not open the cabinet. Refer servicing to
qualified personnel only.
FCC Notice
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that any changes or modifications not expressly
approved in this manual could void your authority to operate this
equipment.
WARNING
IMPORTANTE
Para prevenir cualquier mal funcionamiento y evitar daños, por
favor, lea detalladamente este manual de instrucciones antes
de conectar y operar este equipo.
If you have any questions about this product, you may call;
Sony Customer Information Services Center
1-800-222-7669 or http://www.sony.com/
Declaration of Conformity
Trade Name: SONY
Model: SDM-G76X
SDM-G96X
Responsible Party: Sony Electronics Inc.
Address: 16530 Via Esprillo,
San Diego, CA 92127 U.S.A.
Telephone Number: 858-942-2230
This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
NOTICE
This notice is applicable for USA/Canada only.
If shipped to USA/Canada, install only a UL LISTED/CSA
LABELLED power supply cord meeting the following
specifications:
SPECIFICATIONS
Plug Type Nema-Plug 5-15p
Cord Type SVT or SJT, minimum 3 × 18 AWG
Length Maximum 15 feet
Rating Minimum 7 A, 125 V
NOTICE
Cette notice s’applique aux Etats-Unis et au Canada
uniquement.
Si cet appareil est exporté aux Etats-Unis ou au Canada, utiliser
le cordon d’alimentation portant la mention UL LISTED/CSA
LABELLED et remplissant les conditions suivantes:
SPECIFICATIONS
Type de fiche Fiche Nema 5-15 broches
Cordon Type SVT ou SJT, minimum 3 × 18 AWG
Longueur Maximum 15 pieds
Tension Minimum 7 A, 125 V
As an ENERGY STAR Partner, Sony
Corporation has determined that this product
meets the ENERGY STAR guidelines for
energy efficiency.
Page: 28
Table of Contents
• Macintosh is a trademark licensed to
Apple Computer, Inc., registered in the
U.S.A. and other countries.
• Windows®
is registered trademarks of
Microsoft Corporation in the United
States and other countries.
• VESA and DDC™
are trademarks of the
Video Electronics Standards
Association.
• ENERGY STAR®
is a U.S. registered
mark.
• Adobe and Acrobat are trademarks of
Adobe Systems Incorporated.
• All other product names mentioned
herein may be the trademarks or
registered trademarks of their respective
companies.
• Furthermore, “™” and “®” are not
mentioned in each case in this manual.
http://www.sony.net/
3 (GB)
Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Identifying parts and controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Step 1: Use the stand. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Step 2: Connect the display to your computer . . . . . . . . . . . . . . . . . 8
Step 3: Connect the power cord. . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Step 4: Secure the cords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Step 5: Turn on the monitor and computer . . . . . . . . . . . . . . . . . . . 9
Adjusting the tilt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Selecting the input signal (INPUT button). . . . . . . . . . . . . . . . . . . . 10
Customizing Your Monitor . . . . . . . . . . . . . . . . . . . . . . .11
Navigating the menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Setting the MODE (PICTURE MODE) . . . . . . . . . . . . . . . . . . . . . . 11
PICTURE menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
AUDIO menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
SCREEN menu (analog RGB signal only) . . . . . . . . . . . . . . . . 14
MENU POSITION menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
INPUT SENSING menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
LANGUAGE menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
0 RESET menu (reset to the default setting) . . . . . . . . . . . . . . . . 17
MENU LOCK menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Technical Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Controlling the volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Power saving function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Automatic picture quality adjustment function
(analog RGB signal only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
On-screen messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Trouble symptoms and remedies . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Page: 29
4 (GB)
Precautions
Warning on power connections
• Use the supplied power cord. If you use a different power cord,
be sure that it is compatible with your local power supply.
For the customers in the U.S.A.
If you do not use the appropriate cord, this monitor will not
conform to mandatory FCC standards.
For the customers in the UK
If you use the monitor in the UK, be sure to use the appropriate
UK power cord.
Installation
Do not install or leave the monitor:
• In places subject to extreme temperatures, for example near a
radiator, heating vent, or in direct sunlight. Subjecting the
monitor to extreme temperatures, such as in an automobile
parked in direct sunlight or near a heating vent, could cause
deformations of the casing or malfunctions.
• In places subject to mechanical vibration or shock.
• Near any equipment that generates a strong magnetic field,
such as a TV or various other household appliances.
• In places subject to inordinate amounts of dust, dirt, or sand, for
example near an open window or an outdoor exit. If setting up
temporarily in an outdoor environment, be sure to take
adequate precautions against airborne dust and dirt. Otherwise
irreparable malfunctions could occur.
Be careful not to touch the air vents on the upper rear of
thedisplay, since they become heated.
Place this unit on a flat surface. Do not place it on an uneven
surface like the edge of a desk. If a part of this unit sticks out from
such surface, it may fall or cause damaged and injury.
Ventilation
The openings of the top and bottom parts are provided for
necessary ventilation. To ensure reliable operation of the set, and
to protect it from overheating, these openings must never be
blocked or covered.
The ventilation should not be impeded by covering the ventilation
openings with items, such as newspapers, tablecloths, curtains,
etc.
Handling the LCD screen
• Do not leave the LCD screen facing the sun as it can damage
the LCD screen. Take care when you place the monitor by a
window.
• Do not push on or scratch the LCD screen. Do not place a heavy
object on the LCD screen. This may cause the screen to lose
uniformity or cause LCD panel malfunctions.
• If the monitor is used in a cold place, a residual image may
appear on the screen. This is not a malfunction. The screen
returns to normal as the temperature rises to a normal operating
level.
• If a still picture is displayed for a long time, a residual image
may appear for a while. The residual image will eventually
disappear.
• The LCD panel becomes warm during operation. This is not a
malfunction.
About the built-in stereo speakers
• Do not remove the screws from the back of the speaker. Doing
so may lead to a malfunction.
• Be sure to keep magnetic recording equipment, tapes, and
floppy discs away from the speaker’s opening as the speakers
generate a magnetic field. This magnetic field may affect data
stored on magnetic tapes and discs.
Note on the LCD (Liquid Crystal Display)
Please note that the LCD screen is made with high-
precision technology. However, black points or bright
points of light (red, blue, or green) may appear
constantly on the LCD screen, and irregular colored
stripes or brightness may appear on the LCD screen.
This is not malfunction.
(Effective dots: more than 99.99%)
Maintenance
• Be sure to unplug the power cord from the power outlet before
cleaning your monitor.
• Clean the LCD screen with a soft cloth. If you use a glass
cleaning liquid, do not use any type of cleaner containing an
anti-static solution or similar additive as this may scratch the
LCD screen’s coating.
• Clean the cabinet, panel, and controls with a soft cloth lightly
moistened with a mild detergent solution. Do not use any type
of abrasive pad, scouring powder, or solvent, such as alcohol or
benzine.
• Do not rub, touch, or tap the surface of the screen with sharp or
abrasive items such as a ballpoint pen or screwdriver. This type
of contact may result in a scratched picture tube.
• Note that material deterioration or LCD screen coating
degradation may occur if the monitor is exposed to volatile
solvents such as insecticide, or if prolonged contact is
maintained with rubber or vinyl materials.
• Note that if service personnel changes some parts during repair,
these parts may be retained.
Transportation
• Disconnect all cables from the monitor and grasp the monitor
firmly with both hands when transporting. If you drop the
monitor, you may be injured or the monitor may be damaged.
• When you transport this monitor for repair or shipment, use the
original carton and packing materials.
Installation on a wall or a mounting arm
If you intend to install the display on a wall or a mounting arm, be
sure to consult qualified personnel.
The equipment should be installed near an easily accessible outlet.
Example of plug types
for 100 to 120 V AC for 200 to 240 V AC for 240 V AC only
Page: 30
5 (GB)
Disposal of the monitor
• Do not dispose of this monitor with general
household waste.
• The fluorescent tube used in this monitor contains
mercury. Disposal of this monitor must be carried out
in accordance to the regulations of your local
sanitation authority.
For customers in the United States
This product contains mercury. Disposal of this product may be
regulated if sold in the United States. For disposal or recycling
information, please contact your local authorities or the
Electronics Industries Alliance (http://www.eiae.org).
Page: 31
6 (GB)
Identifying parts and controls
See the pages in parentheses for further details.
The 1 (power) switch and the control buttons are on the front
right lower side of the monitor.
Front of the display
A 1 (Power) switch and indicator (pages 9, 19)
To turn the display on or off, press the 1 (power) switch
upward.
The power indicator lights up in green when the display is
turned on, and lights up in orange when the monitor is in
power saving mode.
B MENU button (page 11)
This button displays or closes the main menu.
You can also switch on the DDC/CI function by keeping this
button pressed for more than 8 seconds.
C m/M and w (volume control) buttons (page 11, 18)
These buttons are used to select the menu items and make
adjustments, and also display the “Volume” menu to control
the volume.
D OK button (page 11)
This button selects the item or executes the settings in the
menu.
E (PICTURE MODE) button (page 11)
This button is used to adjust the PICTURE MODE.
F INPUT button (page 10)
This button switches the video input signal between INPUT1
and INPUT2 when two computers are connected to the
monitor.
G Stereo speakers (page 18)
These speakers output the audio signals as sound.
Press to turn the display on or off.
Page: 32
7 (GB)
Rear of the display
Side view of the LCD display
H Security Lock Hole
The security lock hole should be applied with the Kensington
Micro Saver Security System.
Micro Saver Security System is a trademark of Kensington.
I AC IN connector (page 9)
Connect the power cord (supplied).
J Audio input jack for INPUT1/2 (page 8)
This jack inputs audio signals when connected to the audio
output jack of a computer or other audio equipments
connected to INPUT1/INPUT2.
K DVI-D input connector (digital RGB) for INPUT1
(page 8)
This connector inputs digital RGB video signals that comply
with DVI Rev.1.0.
L HD15 input connector (analog RGB) for INPUT2
(page 8)
This connector inputs analog RGB video signals (0.7 Vp-p,
positive) and SYNC signals.
M Headphones jack (page 18)
This jack outputs audio signals to the headphones.
Page: 33
8 (GB)
Setup
Before using your monitor, check that the following items are
included in your carton:
• LCD display
• Power cord
• HD15-HD15 video signal cable (analog RGB)
• DVI-D video signal cable (digital RGB)
• Audio cord (stereo miniplug)
• Cord strap
• CD-ROM (utility software for Windows/Macintosh, Operating
Instructions, etc.)
• Warranty card
• Quick Setup Guide
Step 1:Use the stand
x Using the supplied stand
Open the stand.
Note
The stand is folded at the factory. Be sure not to place the display
vertically with the stand as it is. Otherwise, the display may topple over.
x Using the VESA compatible stand
When using a non-supplied VESA compatible mounting arm or
stand, use the VESA compatible screws to attach.
You can use the display with or without the supplied stand.
Step 2:Connect the display to your
computer
Turn off the monitor and computer before connecting.
Notes
• Do not touch the pins of the video signal cable connector as this might
bend the pins.
• Check the alignment of the HD15 connector to prevent bending the pins
of the video signal cable connector.
x Connect a computer equipped with a DVI
output connector (digital RGB)
Using the supplied DVI-D video signal cable (digital RGB),
connect the computer to the monitor’s DVI-D input connector
(digital RGB)
x Connect a computer equipped with an HD15
output connector (analog RGB)
Using the supplied HD15-HD15 video signal cable (analog
RGB), connect the computer to the monitor’s HD15 input
connector (analog RGB).
screw positions of
the supplied stand
Bottom-side view
screw positions of VESA
compatible stand
(75mm)
to the computer’s DVI
output connector
(digital RGB)
to the DVI-D input
connector
(digital RGB)
DVI-D video signal cable
(digital RGB) (supplied)
to the HD15 input
connector
(analog RGB)
to the computer’s HD15
output connector
(analog RGB)
HD15-HD15 video signal
cable (analog RGB)
(supplied)
Page: 34
9 (GB)
x Connect the audio cord
Connect the supplied audio cord to the monitor’s
corresponding audio input jack.
Using the monitor’s speakers or headphones, you can listen to
sound from your computer or other audio equipment connected to
the monitor’s audio input jacks.
For more information, see “Controlling the volume” on page 18.
Step 3:Connect the power cord
With the monitor and computer switched off, first connect the
power cord to the monitor, then connect it to a power outlet.
Step 4:Secure the cords
1 Bundle the cables and cords.
Using the supplied cord strap, bundle the cables and cords.
Step 5:Turn on the monitor and
computer
Press the 1 (power) switch.
The 1 (power) indicator of the monitor lights up in green.
Turn on the computer.
The installation of your monitor is complete. If necessary, use the
monitor’s controls to adjust the picture.
• If no picture appears on your screen
Check that the power cord and the video signal cable are
properly connected.
• If NO INPUT SIGNAL appears on the screen:
The computer is in the power saving mode. Try pressing any
key on the keyboard or moving the mouse.
• If CABLE DISCONNECTED appears on the screen:
Check that the video signal cable is properly connected.
• If OUT OF RANGE appears on the screen:
Reconnect the old monitor. Then adjust the computer’s
graphics board within the following ranges.
to audio output of the
computer or other audio
equipment audio cord (supplied)
to the audio input
to AC IN
to a power outlet
power cord (supplied)
Cord strap (supplied)
The illustration of the back of the monitor shown here
is that of the SDM-G76X.
The same applies for the other models.
Page: 35
10 (GB)
For more information about the on-screen messages, see “Trouble
symptoms and remedies” on page 21.
No need for specific drivers
The monitor complies with the “DDC” Plug & Play standard and
automatically detects all the monitor’s information. No specific driver
needs to be installed to the computer.
The first time you turn on your computer after connecting the monitor, the
setup Wizard may appear on the screen. In this case, follow the on-screen
instructions. The Plug & Play monitor is automatically selected so that
you can use this monitor.
The vertical frequency turns to 60 Hz.
Since flickers are unobtrusive on the monitor, you can use it as it is. You
do not need to set the vertical frequency to any particular high value.
Adjusting the tilt
This display can be adjusted within the angles shown below.
Grasp the lower sides of the LCD panel, then adjust screen tilt.
To use the display comfortably
This display is designed so that you can set it up at a comfortable
viewing angle. Adjust the viewing angle of your display
according to the height of the desk and chair, and so that light is
not reflected from the screen to your eyes.
Note
When adjusting the screen tilt, make sure not to knock or drop the display
off the desk.
Selecting the input signal
(INPUT button)
Press the INPUT button.
The input signal changes each time you press this button.
Analog RGB Digital RGB
Horizontal
frequency
28–80 kHz 28–64 kHz
Vertical
frequency
56–75 Hz 60 Hz
Resolution 1280 × 1024 or
less
1280 × 1024 or less
Approx. 20°
On-screen message
(Appears about 5 seconds on
the upper left corner.)
Input signal configuration
INPUT1 : DVI-D DVI-D input connector
(digital RGB) for INPUT1
INPUT2 : HD15 HD15 input connector
(analog RGB) for INPUT2
Page: 36
11 (GB)
Customizing Your Monitor
You can make numerous adjustments to your monitor using the
on-screen menu.
Navigating the menu
x Using the MENU, m/M, and OK buttons
1 Display the main menu.
Press the MENU button to display the main menu on your
screen.
2 Select the menu you want to adjust.
Press the m/M buttons to display the desired menu. Press the
OK button to select the menu item.
3 Adjust the menu.
Press the m/M buttons to make the adjustment, then press the
OK button.
When you press the OK button, the setting is stored, then the
display returns to the previous menu.
4 Close the menu.
Press the MENU button once to return to normal viewing. If
no buttons are pressed, the menu closes automatically after
about 45 seconds.
Setting the MODE
(PICTURE MODE)
If you press the button on the lower right side of the monitor
repeatedly, you can select MODE from MOVIE t PC t
USER t GAME.
Press the button repeatedly.
The default setting of MODE is set to MOVIE. When you press
the button once, MOVIE (the default setting) is displayed,
and when you press again, PC is displayed.
Each time you press the button, the mode changes as follows.
Each mode appears on the screen and MODE is changed. The
menu automatically disappears after about 5 seconds.
With USER selected, you can adjust the backlight level by
pressing the m/M buttons or by selecting backlight from the
MENU.
Note
You can fine adjust the picture quality for each mode.
x Resetting the adjustments
You can reset the adjustments using the RESET menu. See
page 17 for more information on resetting the adjustments.
Before making adjustments
Connect the monitor and the computer, and turn them on.
Wait for at least 30 minutes before making adjustments for the
best result.
,
,
1 0 0
:
:
:
MOVIE
USER
PC
: GAME
,
Page: 37
12 (GB)
x Controlling the monitor by computer
Press the MENU button down for at least 5 seconds. You will see
an on-screen message indicating the current setting. After 3
seconds the DDC/CI setting is switched on or off, as shown
below.
Note
This function applies only to computers that support the DDC/CI (Display
Data Channel Command Interface) function.
PICTURE menu
You can adjust the following items using PICTURE menu.
• MODE
(GAME/MOVIE/PC/USER)
• BACKLIGHT
• CONTRAST 6
• BRIGHTNESS
• COLOR
• GAMMA
• SHARPNESS
• MODE RESET 0
x MODE menu
You can select the appropriate screen brightness for your purpose.
The PICTURE settings can be set for each mode.
The changed setting is automatically applied for each input
(INPUT1/INPUT2).
1 Press the MENU button.
The main menu appears on the screen.
2 Press the m/M button to select (PICTURE) and
press the OK button.
The PICTURE menu appears on the screen.
3 Press the m/M button to select MOVIE and press the
OK button.
The MODE menu appears on the screen.
4 Press the m/M button to select the desired mode and
press the OK button.
The default setting is MOVIE.
• GAME: Bright picture.
• MOVIE: Clear picture with strong contrast.
• PC: Soft tone picture.
• USER: Picture with low brightness.
Note
You can fine adjust the picture quality for each mode.
x Adjusting the backlight
(BACKLIGHT)
If the screen is too bright, adjust the backlight to make the screen
easier to see.
1 Press the MENU button.
The main menu appears on the screen.
2 Press the m/M buttons to select (PICTURE) and
press the OK button.
The PICTURE menu appears on the screen.
3 Press the m/M buttons to select (BACKLIGHT)
and press the OK button.
The BACKLIGHT menu appears on the screen.
4 Press the m/M buttons to adjust the light level and
press the OK button.
x Adjusting the contrast
(CONTRAST)
Adjust the picture contrast.
Note
While COLOR is set to sRGB, you cannot adjust CONTRAST,
BRIGHTNESS or GAMMA.
1 Press the MENU button.
The main menu appears on the screen.
2 Press the m/M buttons to select (PICTURE) and
press the OK button.
The PICTURE menu appears on the screen.
3 Press the m/M buttons to select 6 (CONTRAST) and
press the OK button.
The CONTRAST menu appears on the screen.
4 Press the m/M buttons to adjust the contrast and
press the OK button.
x Adjusting the black level of an image
(BRIGHTNESS)
Adjust the picture brightness (black level).
Note
While COLOR is set to sRGB, you cannot adjust CONTRAST,
BRIGHTNESS or GAMMA.
1 Press the MENU button.
The main menu appears on the screen.
2 Press the m/M buttons to select (PICTURE) and
press the OK button.
The PICTURE menu appears on the screen.
On-screen messages
(Appear for a while)
DDC-CI : ON
(default setting)
Allows the computer to control
menu settings.
DDC-CI : OFF Does not allow the computer to
control menu settings.
EX I T
6
P C TURE
I
1 2 8 0 1 0 2 4
1 0 0
:
7 0
:
5 0
:
6 0 H z
x /
M O V I E
MODE
GAME
MOVIE
PC
USER
EX I T
1 2 8 0 1 0 2 4 6 0 H z
x /
Page: 38
13 (GB)
3 Press the m/M buttons to select (BRIGHTNESS)
and press the OK button.
The BRIGHTNESS menu appears on the screen.
4 Press the m/M buttons to adjust the brightness and
press the OK button.
x Adjusting the color temperature
(COLOR)
You can select the picture’s color level for the white color field
from the default color temperature settings.
Also, if necessary, you can fine tune the color temperature.
You can set the desired color temperature for each mode of the
brightness of screen.
1 Press the MENU button.
The main menu appears on the screen.
2 Press the m/M buttons to select (PICTURE) and
press the OK button.
The PICTURE menu appears on the screen.
3 Press the m/M buttons to select (COLOR) and
press the OK button.
The COLOR menu appears on the screen.
4 Press the m/M buttons to select the desired color
temperature and press the OK button.
Whites will change from a bluish hue to reddish hue as the
temperature is lowered from 9300K to 6500K (default
setting).
When you select “sRGB,” the colors adjust to the sRGB
profile. (The sRGB color setting is an industry-standard color
space protocol designed for computer products.) If you select
“sRGB,” the color settings of your computer must be set to the
sRGB profile.
Notes
• If a connected computer or other equipment is not sRGB-compliant,
color cannot be adjusted to the sRGB profile.
• While COLOR is set to sRGB, you cannot adjust CONTRAST,
BRIGHTNESS or GAMMA.
Fine tuning the color temperature
(USER ADJUSTMENT)
The color temperature can be set for each mode
(GAME/MOVIE/PC/USER).
1 Press the m/M buttons to select ADJUST and press
the OK button.
The USER ADJUSTMENT menu appears on the screen.
2 Press the m/M buttons to select R (Red) or B (Blue)
and press the OK button. Then press the m/M
buttons to adjust the color temperature and press
the OK button.
Since this adjustment changes the color temperature by
increasing or decreasing the R and B components with respect
to G (green), the G component is fixed.
3 Press the m/M buttons to select , then press the
OK button.
The new color setting is stored in memory and automatically
recalled whenever USER is selected.
The COLOR menu appears on the screen.
x Changing the gamma setting
(GAMMA)
You can associate the picture’s color shade on the screen with the
picture’s original color shade.
Note
While COLOR is set to sRGB, you cannot adjust CONTRAST,
BRIGHTNESS or GAMMA.
1 Press the MENU button.
The main menu appears on the screen.
2 Press the m/M buttons to select (PICTURE) and
press the OK button.
The PICTURE menu appears on the screen.
3 Press the m/M buttons to select (GAMMA) and
press the OK button.
The GAMMA menu appears on the screen.
4 Press the m/M buttons to select the desired mode
and press the OK button.
x Adjusting the sharpness
(SHARPNESS)
Adjust to sharpen the edge of images, etc.
1 Press the MENU button.
The main menu appears on the screen.
2 Press the m/M buttons to select (PICTURE) and
press the OK button.
The PICTURE menu appears on the screen.
3 Press the m/M buttons to select (SHARPNESS)
and press the OK button.
The SHARPNESS menu appears on the screen.
EX I T
1 2 8 0 1 0 2 4 6 0 H z
x /
9 3 0 0 K
6 5 0 0 K
sRGB
USER
AD J U S T
M O V I E
COLOR
R
G
B
USER A D J U S T MENT
EX I T
1 2 8
1 2 8
1 2 8
1 2 8 0 1 0 2 4 6 0 H z
x /
EX I T
1 2 8 0 1 0 2 4 6 0 H z
x /
GAMMA 1
GAMMA 2
GAMMA 3
GAMMA 4
GAMMA
M O V I E
Page: 39
14 (GB)
4 Press the m/M buttons to adjust the sharpness and
press the OK button.
x MODE RESET menu (resetting every
mode to the default) 0
You can reset the adjustments to the default settings.
1 Press the MENU button.
The main menu appears on the screen.
2 Press the m/M button to select (PICTURE) and
press the OK button.
The PICTURE menu appears on the screen.
3 Press the m/M buttons to select 0 (MODE RESET)
and press the OK button.
The MODE RESET menu appears on the screen.
4 Press the m/M buttons to select the desired mode
and press the OK button.
• OK: To reset every mode in the PICTURE menu to
the default settings.
• CANCEL:To cancel resetting and return to the PICTURE
menu.
AUDIO menu
You can adjust the following items using the AUDIO menu.
• TREBLE
• BASS
• BALANCE
• SURROUND
• RESET 0
x Adjusting TREBLE, BASS or BALANCE
1 Press the MENU button.
The main menu appears on the screen.
2 Press the m/M buttons to select 5 (AUDIO) and
press the OK button.
3 Press the m/M buttons to select TREBLE, BASS or
BALANCE, and press the OK button.
4 Press the m/M buttons to to adjust the treble, bass
or balance, and press the OK button.
NOTE
Only when SURROUND is set to off, TREBLE and BASS can be
adjusted.
x Selecting SURROUND
1 Press the MENU button.
The main menu appears on the screen.
2 Press the m/M buttons to select 5 (AUDIO) and
press the OK button.
3 Press the m/M buttons to select SURROUND and
press the OK button.
4 Press the m/M buttons to select the desired mode
and press the OK button.
• ON: Provides powerful sound(surround effect).
• OFF: Turns off the surround effect.
x AUDIO RESET menu (resetting every
mode to the default) 0
You can reset the adjustments to the default settings.
1 Press the MENU button.
The main menu appears on the screen.
2 Press the m/M button to select 5 (AUDIO) and press
the OK button.
The AUDIO menu appears on the screen.
3 Press the m/M buttons to select 0 (RESET) and
press the OK button.
The AUDIO RESET menu appears on the screen.
4 Press the m/M buttons to select the desired mode
and press the OK button.
• OK: To reset every mode in the AUDIO menu to the
default settings.
• CANCEL:To cancel resetting and return to the AUDIO
menu.
SCREEN menu (analog RGB
signal only)
You can adjust the following items using the SCREEN menu.
• AUTO ADJUST
• PHASE
• PITCH
• H CENTER
• V CENTER
EX I T
1 2 8 0 1 0 2 4 6 0 H z
x /
TREBLE
BASS
BALANCE
SURROUND
0
AUD I O
M O V I E
Note
When receiving digital RGB signals from the DVI-D input connector
for INPUT1, adjustment is unnecessary.
EX I T
1 2 8 0 1 0 2 4 6 0 H z
x /
ON
OFF
SURROUND
E X I T
1 2 8 0 1 0 2 4 6 0 H z
x /
AU TO AD J US T
PHAS E
P TCH
H CENTER
V CENTER
SCREEN
I
Page: 40
15 (GB)
x Automatic picture quality adjustment
function
When the monitor receives an input signal, it automatically
adjusts the picture’s position and sharpness (phase/pitch), and
ensures that a clear picture appears on the screen (page 19).
Note
While the automatic picture quality adjustment function is activated, only
the 1 (power) switch will operate.
If the automatic picture quality adjustment function of this
monitor seems to not completely adjust the picture
You can make further automatic adjustment of the picture quality for the
current input signal (See AUTO ADJUST below).
If you still need to make further adjustments to the picture
quality
You can manually adjust the picture’s sharpness (phase/pitch) and
position (horizontal/vertical position).
These adjustments are stored in memory and automatically
recalled when the monitor receives a previously input and
registered input signal.
x Make further automatic adjustments to the
picture quality for the current input signal
(AUTO ADJUST)
1 Press the MENU button.
The main menu appears on the screen.
2 Press the m/M buttons to select (SCREEN) and
press the OK button.
The SCREEN menu appears on the screen.
3 Press the m/M buttons to select AUTO ADJUST and
press the OK button.
The AUTO ADJUST menu appears on the screen.
4 Press the m/M buttons to select ON or OFF and
press the OK button.
• ON: Make the appropriate adjustments of the screen's
phase, pitch and horizontal/vertical position for
the current input signal and store them.
Note
When the monitor is turned on or the input signal is
changed, AUTO ADJUST makes the automatic
adjustments.
• OFF: AUTO ADJUST is not available.
Note
AUTO ADJUST works automatically when the input
signal is changed.
5 Press the m/M buttons to select and press the
OK button.
Return to the menu screen.
x Adjust the picture’s sharpness and position
manually (PITCH/PHASE/H CENTER/
V CENTER)
You can adjust the picture’s sharpness as follows. This
adjustment is effective when the computer is connected to the
monitor’s HD15 input connector (analog RGB).
1 Set the resolution to 1280 × 1024 on the computer.
2 Load the CD-ROM.
3 Start the CD-ROM
For Windows User
When Auto run operates:
Select the area, language and model, and click DISPLAY
ADJUSTMENT TOOL (UTILITY).
4 Click “Adjust” and confirm the current resolution
(top value) and recommended resolution (bottom
value), and then click “Next”.
Test pattern for PITCH appears.
5 Press the MENU button.
The main menu appears on the screen.
6 Press the m/M buttons to select (SCREEN) and
press the OK button.
The SCREEN menu appears on the screen.
7 Press the m/M buttons to select PITCH and press the
OK button.
The PITCH adjustment menu appears on the screen.
8 Press the m/M buttons until the vertical stripes
disappear.
Adjust so that the vertical stripes disappear.
9 Press the OK button.
The main menu appears on the screen.
If horizontal stripes are observed over the entire screen, adjust
the PHASE using the following procedures.
10 Click “Next”.
Test pattern for PHASE appears.
11 Press the m/M buttons to select PHASE and press
the OK button.
The PHASE adjustment menu appears on the screen.
Page: 41
16 (GB)
12 Press the m/M buttons until the horizontal stripes
are at a minimum.
Adjust so that the horizontal stripes are at a minimum.
13 Press the OK button.
The main menu appears on the screen.
14 Click “Next”.
Test pattern for CENTER appears.
15 Press the m/M buttons to select H CENTER or V
CENTER and press the OK button.
The H CENTER adjustment menu or V CENTER adjustment
menu appears on the screen.
16 Press the m/M buttons to center the test pattern on
the screen.
17 Click “Next”.
Click "End" or “EXIT” to turn off the test pattern.
When Auto run fails to operate:
1 Open “My Computer” and right click the CD-ROM
icon.
Go to “Explorer” and open the CD-ROM icon.
2 Open [Utility] and then select [WINDOWS].
3 Start [WIN_UTILITY.EXE].
Test pattern appears. Go to step 4.
For Macintosh User
1 Open the CD-ROM.
2 Open [Utility] and then select [MAC].
3 Open [MAC UTILITY] and then start
[MAC_CLASSIC_UTILITY] or [MAC_OSX_UTILITY].
Test pattern appears. Go to step 4.
4 Press the MENU button.
The main menu appears on the screen.
5 Press the m/M buttons to select (SCREEN) and
press the OK button.
The SCREEN menu appears on the screen.
6 Press the m/M buttons to select PHASE and press
the OK button.
The PHASE adjustment menu appears on the screen.
7 Press the m/M buttons until the horizontal stripes
are at a minimum.
Adjust so that the horizontal stripes are at a minimum.
8 Press the OK button.
The main menu appears on the screen.
If vertical stripes are observed over the entire screen, adjust
the PITCH using the following procedures.
9 Press the m/M buttons to select PITCH and press the
OK button.
The PITCH adjustment menu appears on the screen.
10 Press the m/M buttons until the vertical stripes
disappear.
Adjust so that the vertical stripes disappear.
11 Press the OK button.
The main menu appears on the screen.
12 Press the m/M buttons to select H CENTER or V
CENTER and press the OK button.
The H CENTER adjustment menu or V CENTER adjustment
menu appears on the screen.
13 Press the m/M buttons to center the test pattern on
the screen.
14 Click “END” on the screen to turn off the test
pattern.
MENU POSITION menu
You can change the menu position if it is blocking an image on
the screen.
1 Press the MENU button.
The main menu appears on the screen.
EX I T
1 2 8 0 1 0 2 4 6 0 H z
x /
MENU POS T ON
I I
Page: 42
17 (GB)
2 Press the m/M buttons to select (MENU
POSITION) and press the OK button.
The MENU POSITION menu appears on the screen.
3 Press the m/M buttons to select the desired position
and press the OK button.
There are three positions each for the top, center and bottom
of the screen.
INPUT SENSING menu
When you select AUTO ON in the INPUT SENSING menu, the
monitor automatically detects an input signal to an input terminal,
and changes the input automatically before the monitor goes into
the power saving mode.
1 Press the MENU button.
The main menu appears on the screen.
2 Press the m/M buttons to select (INPUT
SENSING) and press the OK button.
The INPUT SENSING menu appears on the screen.
3 Press the m/M buttons to select the desired mode
and press the OK button.
• AUTO ON: When the selected input terminal has no
input signal, or when you select an input
terminal by the INPUT button on the
monitor and the terminal has no input
signal, the on-screen message appears
(page 20) and the monitor checks the input
signal to another input terminal
automatically to change the input.
When the input is changed, the selected
input terminal is displayed on the left upper
of the screen.
When there is no input signal, the monitor
goes into the power saving mode
automatically.
• AUTO OFF: The input is not changed automatically.
Press the INPUT button to change the
input.
LANGUAGE menu
You can change the languages used on menus or messages
displayed on this monitor.
1 Press the MENU button.
The main menu appears on the screen.
2 Press the m/M buttons to select (LANGUAGE)
and press the OK button.
The LANGUAGE menu appears on the screen.
3 Press the m/M buttons to select a language and
press the OK button.
• ENGLISH
• FRANÇAIS: French
• DEUTSCH: German
• ESPAÑOL: Spanish
• ITALIANO: Italian
• NEDERLANDS: Dutch
• SVENSKA: Swedish
• : Russian
• : Japanese
• : Chinese
0 RESET menu (reset to the
default setting)
You can reset the adjustments to the default settings.
1 Press the MENU button.
The main menu appears on the screen.
2 Press the m/M buttons to select 0 (RESET) and
press the OK button.
The RESET menu appears on the screen.
3 Press the m/M buttons to select the desired mode
and press the OK button.
• OK: To reset all of the adjustment data to the default
settings. Note that the LANGUAGE setting
is not reset by this method.
• CANCEL:To cancel resetting and return to the menu
screen.
EX I T
1 2 8 0 1 0 2 4 6 0 H z
x /
AUTO ON
AUTO OFF
I NPUT SENSING
EX I T
1 2 8 0 1 0 2 4 6 0 H z
x /
LANGUAGE
ENGL I SH
FRANÇA I S
DEUTSCH
ESPA ÑOL
I TA L I ANO
EX I T
1 2 8 0 1 0 2 4 6 0 H z
x /
O K
CANCEL
RESET
Page: 43
18 (GB)
MENU LOCK menu
You can lock the control of buttons to prevent accidental
adjustments or resetting.
1 Press the MENU button.
The main menu appears on the screen.
2 Press the m/M buttons to select (MENU LOCK)
and press the OK button.
The MENU LOCK menu appears on the screen.
3 Press the m/M buttons to select either ON or OFF.
• ON: Only the 1 (power) switch and MENU button
will operate. If you attempt any other operation,
the icon appears on the screen. With
MENU LOCK set to ON, only this menu item can
be selected.
• OFF: MENU LOCK is set to OFF.
Technical Features
Controlling the volume
Using the monitor’s speakers or headphones, you can listen to
sound from your computer or other audio equipment connected to
the monitor’s audio input jacks.
You can control the volume by using a separate “Volume” menu
from the main menu.
1 Press the m/M buttons when no menu appears on
the screen.
2 Press the m/M buttons to control the volume.
The menu automatically disappears after about 5 seconds.
Notes
• You cannot adjust the volume when the main menu is displayed on the
screen.
• When your monitor is in power saving mode, no sound comes from the
speakers or the headphones.
EX I T
1 2 8 0 1 0 2 4 6 0 H z
x /
O N
O F F
MENU LOCK
3 0
VOLUME
,
Page: 44
19 (GB)
Power saving function
This monitor meets the power-saving guidelines set by VESA,
ENERGY STAR, and NUTEK. If the monitor is connected to a
computer or video graphics board that is DPMS (Display Power
Management Standard) for Analog input/DMPM (DVI Digital
Monitor Power Management) for Digital input compliant, the
monitor will automatically reduce power consumption as shown
below.
SDM-G76X
SDM-G96X
* When your computer enters the “active off” mode, the input signal is
cut and NO INPUT SIGNAL appears on the screen. After 5 seconds,
the monitor enters the power saving mode.
** “deep sleep” is the power saving mode defined by the Environmental
Protection Agency.
Automatic picture quality
adjustment function
(analog RGB signal only)
When the monitor receives an input signal, it
automatically adjusts the picture’s position and
sharpness (phase/pitch), and ensures that a clear
picture appears on the screen.
The factory preset mode
When the monitor receives an input signal, it automatically
matches the signal to one of the factory preset modes stored in the
monitor’s memory to provide a high quality picture at the center
of the screen. If the input signal matches the factory preset mode,
the picture appears on the screen automatically with the
appropriate default adjustments.
If input signals do not match one of the factory
preset modes
When the monitor receives an input signal that does not match one
of the factory preset modes, the automatic picture quality
adjustment function of this monitor is activated to ensure that a
clear picture always appears on the screen (within the following
monitor frequency ranges):
Horizontal frequency: 28–80 kHz
Vertical frequency: 56–75 Hz
Consequently, the first time the monitor receives input signals
that do not match one of the factory preset modes, the monitor
may take a longer time than normal to display the picture on the
screen. This adjustment data is automatically stored in memory so
that next time, the monitor will function in the same way as when
the monitor receives the signals that match one of the factory
preset modes.
If you adjust the phase, pitch and picture position
manually while OFF of AUTO ADJUST is selected
For some input signals, the automatic picture quality adjustment
function of this monitor may not completely adjust the picture
position, phase, and pitch. In this case, you can set these
adjustments manually (page 15). If you set these adjustments
manually, they are stored in memory as user modes and
automatically recalled whenever the monitor receives the same
input signals.
Notes
• While the automatic picture quality adjustment function is activated,
only the 1 (power) switch will operate.
• The picture may flicker during this time, but this is not a malfunction.
Simply wait a few moments until the adjustment completes.
Power mode Power consumption 1 (power)
indicator
normal
operation
50 W (max.) green
active off*
(deep sleep)**
1.0 W (max.) orange
power off 1.0 W (max.) off
Power mode Power consumption 1 (power)
indicator
normal
operation
53 W (max.) green
active off*
(deep sleep)**
1.0 W (max.) orange
power off 1.0 W (max.) off
Page: 45
20 (GB)
Troubleshooting
Before contacting technical support, refer to this section.
On-screen messages
If there is something wrong with the input signal, one of the
following messages appears on the screen. To solve the problem,
see “Trouble symptoms and remedies” on page 21.
If OUT OF RANGE appears on the screen
This indicates that the input signal is not supported by the
monitor’s specifications. Check the following items.
If “xxx.x kHz/xxx Hz” is displayed
This indicates that either the horizontal or vertical frequency
is not supported by the monitor’s specifications.
The figures indicate the horizontal and vertical frequencies of
the current input signal.
If “RESOLUTION > 1280 × 1024” is displayed
This indicates that the resolution is not supported by the
monitor’s specifications (1280 × 1024 or less).
If NO INPUT SIGNAL appears on the screen
This indicates that no signal is being input.
GO TO POWER SAVE
The monitor will enter the power saving mode after about 5
seconds from the time the message is displayed.
If CABLE DISCONNECTED appears on the screen
This indicates that the video signal cable has been disconnected.
GO TO POWER SAVE
The monitor will enter the power saving mode after about 45
seconds from the time the message is displayed.
OUT OF RANGE
I NPUT 1 : DV I –D
x x x . x kHz / x x xHz
I NFORMAT I ON
Example
I NFORMAT I ON
NO I NPUT S I GNAL
GO TO POWER SAVE
I NPUT 1 : DV I –D
Example
CABLE D I SCONNECTED
I NFORMAT I ON
I NPUT 1 : DV I –D
GO TO POWER SAVE
Example
Page: 46
21 (GB)
Trouble symptoms and remedies
If a problem is caused by the connected computer or other equipment, please refer to the connected equipment’s instruction manual.
Symptom Check these items
No picture
If the 1(power) indicator is not lit
after power cord is connected,
or if the 1(power) indicator is not lit
after the power switch is pressed,
• Check that the power cord is properly connected.
If “CABLE DISCONNECTED”
appears on the screen,
• Check that the video signal cable is properly connected and all plugs are firmly seated in
their sockets (page 8).
• Check that the video input connector’s pins are not bent or pushed in.
• Check that the input select setting is correct (page 10).
• A non-supplied video signal cable is connected. If you connect a non-supplied video
signal cable, “CABLE DISCONNECTED” may appear on the screen before entering the
power saving mode. This is not a malfunction.
If “NO INPUT SIGNAL” appears on
the screen, or the 1 (power)
indicator is orange,
• Check that the video signal cable is properly connected and all plugs are firmly seated in
their sockets (page 8).
• Check that the video input connector’s pins are not bent or pushed in.
• Check that the input select setting is correct (page 10).
x Problems caused by a computer or other equipment connected, and not
caused by the monitor
• The computer is in the power saving mode. Try pressing any key on the keyboard or
moving the mouse.
• Check that your graphics board is installed properly.
• Change your graphic board to the latest driver. Or match the version of your graphic board
to the current OS.
• When using a laptop computer, set the output of your computer to video out (for details on
video out setting, contact your computer manufacturer).
• Check that the computer’s power is on.
• Restart the computer.
If “OUT OF RANGE” appears on
the screen,
x Problems caused by a computer or other equipment connected, and not
caused by the monitor
• Check that the video frequency range is within that specified for the monitor. If you
replaced an old monitor with this monitor, reconnect the old monitor and adjust the
computer’s graphics board within the following ranges:
Horizontal: 28–80 kHz (analog RGB), 28–64 kHz (digital RGB)
Vertical: 56–75 Hz (analog RGB), 60 Hz (digital RGB)
Resolution: 1280 × 1024 or less
• Start your OS in Safe mode and restart the computer after setting the resolution. The
setting of safe mode varies depending on your OS. For more details, contact your
computer manufacturer.
If you are using Windows and
replaced an old monitor with this
monitor,
• If you replaced an old monitor with this monitor, reconnect the old monitor and do the
following. Select “SONY” from the “Manufacturers” list and select “SDM-G76X” or
“SDM-G96X” from the “Models” list in the Windows device selection screen. If the
model name of this monitor does not appear in the “Models” list, try “Plug & Play.”
If using a Macintosh system, • If you use the Macintosh adapter (not supplied), check that the Macintosh adapter and the
video signal cable are properly connected.
Picture flickers, bounces,
oscillates, or is scrambled
• Adjust the pitch and phase (analog RGB signal only) (page 15).
• Try plugging the monitor into a different AC outlet, preferably on a different circuit.
x Problems caused by a computer or other equipment connected, and not
caused by the monitor
• Check your graphics board manual for the proper monitor setting.
• Confirm that the graphics mode (VESA, Macintosh 19" Color, etc.) and the frequency of
the input signal are supported by this monitor. Even if the frequency is within the proper
range, some graphics boards may have a sync pulse that is too narrow for the monitor to
sync correctly.
• Adjust the computer’s refresh rate (vertical frequency) to obtain the best possible picture.
Page: 47
22 (GB)
If any problem persists, call your authorized Sony dealer and give
the following information:
• Model name: SDM-G76X or SDM-G96X
• Serial number
• Detailed description of the problem
• Date of purchase
• Name and specifications of your computer and graphics board
Picture is fuzzy • Adjust the brightness and contrast (page 12).
• Adjust the pitch and phase (analog RGB signal only) (page 15).
x Problems caused by a computer or other equipment connected, and not
caused by the monitor
• Set the resolution to SXGA (1280 × 1024) on your computer.
Picture is ghosting • Eliminate the use of video cable extensions and/or video switch boxes.
• Check that all plugs are firmly seated in their sockets.
Picture is not centered or sized
properly (analog RGB signal only)
• Adjust the pitch and phase (page 15).
• Adjust the picture position (page 15). Note that some video modes do not fill the screen to
the edges.
Picture is too small x Problems caused by a computer or other equipment connected, and not
caused by the monitor
• Set the resolution to SXGA (1280 × 1024) on your computer.
Picture is dark • Adjust the brightness (page 12).
• Adjust the backlight (page 12).
• It takes a few minutes for the display to become bright after turning on the monitor.
Wavy or elliptical pattern (moire)
is visible
• Adjust the pitch and phase (analog RGB signal only) (page 15).
Color is not uniform • Adjust the pitch and phase (analog RGB signal only) (page 15).
White does not look white • Adjust the color temperature (page 13).
Monitor buttons do not operate
( appears on the screen)
• If MENU LOCK is set to ON, set it to OFF (page 18).
The monitor turns off after a while x Problems caused by a computer or other equipment connected, and not
caused by the monitor
• Set the computer’s power saving setting to off.
Resolution displayed on the menu
screen is incorrect
• Depending on the graphics board setting, the resolution displayed on the menu screen
may not coincide with the one set on the computer.
Symptom Check these items
Page: 48
23 (GB)
Specifications
SDM-G76X
LCD panel Panel type: a-Si TFT Active Matrix
Picture size: 17.0 inch
Input signal format RGB operating frequency*
Horizontal: 28–80 kHz (analog RGB)
28–64 kHz (digital RGB)
Vertical: 56–75 Hz (analog RGB)
60 Hz (digital RGB)
Resolution Horizontal: Max.1280 dots
Vertical: Max.1024 lines
Input signal levels Analog RGB video signal
0.7 Vp-p, 75 Ω, positive
SYNC signal
TTL level, 2.2 kΩ,
positive or negative
(Separate horizontal and vertical)
Digital RGB (DVI) signal:
TMDS (Single link)
Audio input Stereo minijack, 0.5 Vrms
Speaker output 2 W × 2
Headphones jack Stereo minijack
Power requirements 100–240 V, 50–60 Hz,
Max. 1.0 A
Operating temperature 5–35°C
Dimensions (width/height/depth)
Display (upright):
Approx. 383.5 × 404.5 × 163 mm
(15 1/8 × 16 × 61/2 inches)
Mass Approx. 5.5 kg (12 lb 2 oz)
Plug & Play DDC2B
Accessories See page 8.
SDM-G96X
LCD panel Panel type: a-Si TFT Active Matrix
Picture size: 19.0 inch
Input signal format RGB operating frequency*
Horizontal: 28–80 kHz (analog RGB)
28–64 kHz (digital RGB)
Vertical: 56–75 Hz (analog RGB)
60 Hz (digital RGB)
Resolution Horizontal: Max.1280 dots
Vertical: Max.1024 lines
Input signal levels Analog RGB video signal
0.7 Vp-p, 75 Ω, positive
SYNC signal
TTL level, 2.2 kΩ,
positive or negative
(Separate horizontal and vertical)
Digital RGB (DVI) signal:
TMDS (Single link)
Audio input Stereo minijack, 0.5 Vrms
Speaker output 2 W × 2
Headphones jack Stereo minijack
Power requirements 100–240 V, 50–60 Hz,
Max. 1.0 A
Operating temperature 5–35°C
Dimensions (width/height/depth)
Display (upright):
Approx. 422.5 × 435.5 × 163 mm
(16 3
/4 × 17 1
/4 × 6 1
/2 inches)
Mass Approx. 6 kg (13 lb 3 5/8 oz)
Plug & Play DDC2B
Accessories See page 8.
* Recommended horizontal and vertical timing condition
• Horizontal sync width duty should be more than 4.8% of total
horizontal time or 0.8 µs, whichever is larger.
• Horizontal blanking width should be more than 2.5 µsec.
• Vertical blanking width should be more than 450 µsec.
Design and specifications are subject to change without notice.
Page: 49
2-687-509-03(1)
© 2006 Sony Corporation
TFT LCD Color
Computer Display
SDM-G76X
SDM-G96X
Mode d’emploi (FR)
Page: 50
2 (FR)
Owner’s Record
The model and serial numbers are located at the rear of the unit.
Record these numbers in the spaces provided below. Refer to them
whenever you call upon your dealer regarding this product.
Model No. Serial No.
To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture.
Dangerously high voltages are present inside the
unit. Do not open the cabinet. Refer servicing to
qualified personnel only.
FCC Notice
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that any changes or modifications not expressly
approved in this manual could void your authority to operate this
equipment.
WARNING
IMPORTANTE
Para prevenir cualquier mal funcionamiento y evitar daños, por
favor, lea detalladamente este manual de instrucciones antes
de conectar y operar este equipo.
If you have any questions about this product, you may call;
Sony Customer Information Services Center
1-800-222-7669 or http://www.sony.com/
Declaration of Conformity
Trade Name: SONY
Model: SDM-G76X
SDM-G96X
Responsible Party: Sony Electronics Inc.
Address: 16530 Via Esprillo,
San Diego, CA 92127 U.S.A.
Telephone Number: 858-942-2230
This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
NOTICE
This notice is applicable for USA/Canada only.
If shipped to USA/Canada, install only a UL LISTED/CSA
LABELLED power supply cord meeting the following
specifications:
SPECIFICATIONS
Plug Type Nema-Plug 5-15p
Cord Type SVT or SJT, minimum 3 × 18 AWG
Length Maximum 15 feet
Rating Minimum 7 A, 125 V
NOTICE
Cette notice s’applique aux Etats-Unis et au Canada
uniquement.
Si cet appareil est exporté aux Etats-Unis ou au Canada, utiliser
le cordon d’alimentation portant la mention UL LISTED/CSA
LABELLED et remplissant les conditions suivantes:
SPECIFICATIONS
Type de fiche Fiche Nema 5-15 broches
Cordon Type SVT ou SJT, minimum 3 × 18 AWG
Longueur Maximum 15 pieds
Tension Minimum 7 A, 125 V
As an ENERGY STAR Partner, Sony
Corporation has determined that this product
meets the ENERGY STAR guidelines for
energy efficiency.
Page: 73
2-687-509-03(1)
© 2006 Sony Corporation
TFT LCD Color
Computer Display
SDM-G76X
SDM-G96X
Bedienungsanleitung (DE)
Page: 74
2 (DE)
Owner’s Record
The model and serial numbers are located at the rear of the unit.
Record these numbers in the spaces provided below. Refer to them
whenever you call upon your dealer regarding this product.
Model No. Serial No.
To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture.
Dangerously high voltages are present inside the
unit. Do not open the cabinet. Refer servicing to
qualified personnel only.
FCC Notice
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that any changes or modifications not expressly
approved in this manual could void your authority to operate this
equipment.
WARNING
IMPORTANTE
Para prevenir cualquier mal funcionamiento y evitar daños, por
favor, lea detalladamente este manual de instrucciones antes
de conectar y operar este equipo.
If you have any questions about this product, you may call;
Sony Customer Information Services Center
1-800-222-7669 or http://www.sony.com/
Declaration of Conformity
Trade Name: SONY
Model: SDM-G76X
SDM-G96X
Responsible Party: Sony Electronics Inc.
Address: 16530 Via Esprillo,
San Diego, CA 92127 U.S.A.
Telephone Number: 858-942-2230
This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
NOTICE
This notice is applicable for USA/Canada only.
If shipped to USA/Canada, install only a UL LISTED/CSA
LABELLED power supply cord meeting the following
specifications:
SPECIFICATIONS
Plug Type Nema-Plug 5-15p
Cord Type SVT or SJT, minimum 3 × 18 AWG
Length Maximum 15 feet
Rating Minimum 7 A, 125 V
NOTICE
Cette notice s’applique aux Etats-Unis et au Canada
uniquement.
Si cet appareil est exporté aux Etats-Unis ou au Canada, utiliser
le cordon d’alimentation portant la mention UL LISTED/CSA
LABELLED et remplissant les conditions suivantes:
SPECIFICATIONS
Type de fiche Fiche Nema 5-15 broches
Cordon Type SVT ou SJT, minimum 3 × 18 AWG
Longueur Maximum 15 pieds
Tension Minimum 7 A, 125 V
As an ENERGY STAR Partner, Sony
Corporation has determined that this product
meets the ENERGY STAR guidelines for
energy efficiency.
Page: 98
2 (ES)
Owner’s Record
The model and serial numbers are located at the rear of the unit.
Record these numbers in the spaces provided below. Refer to them
whenever you call upon your dealer regarding this product.
Model No. Serial No.
To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture.
Dangerously high voltages are present inside the
unit. Do not open the cabinet. Refer servicing to
qualified personnel only.
FCC Notice
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that any changes or modifications not expressly
approved in this manual could void your authority to operate this
equipment.
WARNING
IMPORTANTE
Para prevenir cualquier mal funcionamiento y evitar daños, por
favor, lea detalladamente este manual de instrucciones antes
de conectar y operar este equipo.
If you have any questions about this product, you may call;
Sony Customer Information Services Center
1-800-222-7669 or http://www.sony.com/
Declaration of Conformity
Trade Name: SONY
Model: SDM-G76X
SDM-G96X
Responsible Party: Sony Electronics Inc.
Address: 16530 Via Esprillo,
San Diego, CA 92127 U.S.A.
Telephone Number: 858-942-2230
This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
NOTICE
This notice is applicable for USA/Canada only.
If shipped to USA/Canada, install only a UL LISTED/CSA
LABELLED power supply cord meeting the following
specifications:
SPECIFICATIONS
Plug Type Nema-Plug 5-15p
Cord Type SVT or SJT, minimum 3 × 18 AWG
Length Maximum 15 feet
Rating Minimum 7 A, 125 V
NOTICE
Cette notice s’applique aux Etats-Unis et au Canada
uniquement.
Si cet appareil est exporté aux Etats-Unis ou au Canada, utiliser
le cordon d’alimentation portant la mention UL LISTED/CSA
LABELLED et remplissant les conditions suivantes:
SPECIFICATIONS
Type de fiche Fiche Nema 5-15 broches
Cordon Type SVT ou SJT, minimum 3 × 18 AWG
Longueur Maximum 15 pieds
Tension Minimum 7 A, 125 V
As an ENERGY STAR Partner, Sony
Corporation has determined that this product
meets the ENERGY STAR guidelines for
energy efficiency.
Page: 121
2-687-509-03(1)
© 2006 Sony Corporation
TFT LCD Color
Computer Display
SDM-G76X
SDM-G96X
Istruzioni per l’uso (IT)
Page: 122
2 (IT)
Owner’s Record
The model and serial numbers are located at the rear of the unit.
Record these numbers in the spaces provided below. Refer to them
whenever you call upon your dealer regarding this product.
Model No. Serial No.
To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture.
Dangerously high voltages are present inside the
unit. Do not open the cabinet. Refer servicing to
qualified personnel only.
FCC Notice
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that any changes or modifications not expressly
approved in this manual could void your authority to operate this
equipment.
WARNING
IMPORTANTE
Para prevenir cualquier mal funcionamiento y evitar daños, por
favor, lea detalladamente este manual de instrucciones antes
de conectar y operar este equipo.
If you have any questions about this product, you may call;
Sony Customer Information Services Center
1-800-222-7669 or http://www.sony.com/
Declaration of Conformity
Trade Name: SONY
Model: SDM-G76X
SDM-G96X
Responsible Party: Sony Electronics Inc.
Address: 16530 Via Esprillo,
San Diego, CA 92127 U.S.A.
Telephone Number: 858-942-2230
This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
NOTICE
This notice is applicable for USA/Canada only.
If shipped to USA/Canada, install only a UL LISTED/CSA
LABELLED power supply cord meeting the following
specifications:
SPECIFICATIONS
Plug Type Nema-Plug 5-15p
Cord Type SVT or SJT, minimum 3 × 18 AWG
Length Maximum 15 feet
Rating Minimum 7 A, 125 V
NOTICE
Cette notice s’applique aux Etats-Unis et au Canada
uniquement.
Si cet appareil est exporté aux Etats-Unis ou au Canada, utiliser
le cordon d’alimentation portant la mention UL LISTED/CSA
LABELLED et remplissant les conditions suivantes:
SPECIFICATIONS
Type de fiche Fiche Nema 5-15 broches
Cordon Type SVT ou SJT, minimum 3 × 18 AWG
Longueur Maximum 15 pieds
Tension Minimum 7 A, 125 V
As an ENERGY STAR Partner, Sony
Corporation has determined that this product
meets the ENERGY STAR guidelines for
energy efficiency.
Page: 145
2 (PT)
Owner’s Record
The model and serial numbers are located at the rear of the unit.
Record these numbers in the spaces provided below. Refer to them
whenever you call upon your dealer regarding this product.
Model No. Serial No.
To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture.
Dangerously high voltages are present inside the
unit. Do not open the cabinet. Refer servicing to
qualified personnel only.
FCC Notice
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that any changes or modifications not expressly
approved in this manual could void your authority to operate this
equipment.
WARNING
IMPORTANTE
Para prevenir cualquier mal funcionamiento y evitar daños, por
favor, lea detalladamente este manual de instrucciones antes
de conectar y operar este equipo.
If you have any questions about this product, you may call;
Sony Customer Information Services Center
1-800-222-7669 or http://www.sony.com/
Declaration of Conformity
Trade Name: SONY
Model: SDM-G76X
SDM-G96X
Responsible Party: Sony Electronics Inc.
Address: 16530 Via Esprillo,
San Diego, CA 92127 U.S.A.
Telephone Number: 858-942-2230
This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
NOTICE
This notice is applicable for USA/Canada only.
If shipped to USA/Canada, install only a UL LISTED/CSA
LABELLED power supply cord meeting the following
specifications:
SPECIFICATIONS
Plug Type Nema-Plug 5-15p
Cord Type SVT or SJT, minimum 3 × 18 AWG
Length Maximum 15 feet
Rating Minimum 7 A, 125 V
NOTICE
Cette notice s’applique aux Etats-Unis et au Canada
uniquement.
Si cet appareil est exporté aux Etats-Unis ou au Canada, utiliser
le cordon d’alimentation portant la mention UL LISTED/CSA
LABELLED et remplissant les conditions suivantes:
SPECIFICATIONS
Type de fiche Fiche Nema 5-15 broches
Cordon Type SVT ou SJT, minimum 3 × 18 AWG
Longueur Maximum 15 pieds
Tension Minimum 7 A, 125 V
As an ENERGY STAR Partner, Sony
Corporation has determined that this product
meets the ENERGY STAR guidelines for
energy efficiency.
Page: 167
2-687-509-03(1)
© 2006 Sony Corporation
TFT LCD Color
Computer Display
SDM-G76X
SDM-G96X
Инструкция по эксплуатации (RU)
Page: 168
2 (RU)
Owner’s Record
The model and serial numbers are located at the rear of the unit.
Record these numbers in the spaces provided below. Refer to them
whenever you call upon your dealer regarding this product.
Model No. Serial No.
To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture.
Dangerously high voltages are present inside the
unit. Do not open the cabinet. Refer servicing to
qualified personnel only.
FCC Notice
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that any changes or modifications not expressly
approved in this manual could void your authority to operate this
equipment.
Изготовитель: Сони Корпорейшн
Адрес: 6-7-35 Киташинагава,
Шинагава-ку, Токио 141-0001, Япония
Страна-производитель: Китай
WARNING
IMPORTANTE
Para prevenir cualquier mal funcionamiento y evitar daños, por
favor, lea detalladamente este manual de instrucciones antes
de conectar y operar este equipo.
If you have any questions about this product, you may call;
Sony Customer Information Services Center
1-800-222-7669 or http://www.sony.com/
Declaration of Conformity
Trade Name: SONY
Model: SDM-G76X
SDM-G96X
Responsible Party: Sony Electronics Inc.
Address: 16530 Via Esprillo,
San Diego, CA 92127 U.S.A.
Telephone Number: 858-942-2230
This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
NOTICE
This notice is applicable for USA/Canada only.
If shipped to USA/Canada, install only a UL LISTED/CSA
LABELLED power supply cord meeting the following
specifications:
SPECIFICATIONS
Plug Type Nema-Plug 5-15p
Cord Type SVT or SJT, minimum 3 × 18 AWG
Length Maximum 15 feet
Rating Minimum 7 A, 125 V
NOTICE
Cette notice s’applique aux Etats-Unis et au Canada
uniquement.
Si cet appareil est exporté aux Etats-Unis ou au Canada, utiliser
le cordon d’alimentation portant la mention UL LISTED/CSA
LABELLED et remplissant les conditions suivantes:
SPECIFICATIONS
Type de fiche Fiche Nema 5-15 broches
Cordon Type SVT ou SJT, minimum 3 × 18 AWG
Longueur Maximum 15 pieds
Tension Minimum 7 A, 125 V
As an ENERGY STAR Partner, Sony
Corporation has determined that this product
meets the ENERGY STAR guidelines for
energy efficiency.
BZ03
Page: 192
2-687-509-03(1)
© 2006 Sony Corporation
TFT LCD Color
Computer Display
SDM-G76X
SDM-G96X
Bruksanvisning (SE)
Page: 193
2 (SE)
Owner’s Record
The model and serial numbers are located at the rear of the unit.
Record these numbers in the spaces provided below. Refer to them
whenever you call upon your dealer regarding this product.
Model No. Serial No.
To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture.
Dangerously high voltages are present inside the
unit. Do not open the cabinet. Refer servicing to
qualified personnel only.
FCC Notice
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that any changes or modifications not expressly
approved in this manual could void your authority to operate this
equipment.
WARNING
IMPORTANTE
Para prevenir cualquier mal funcionamiento y evitar daños, por
favor, lea detalladamente este manual de instrucciones antes
de conectar y operar este equipo.
If you have any questions about this product, you may call;
Sony Customer Information Services Center
1-800-222-7669 or http://www.sony.com/
Declaration of Conformity
Trade Name: SONY
Model: SDM-G76X
SDM-G96X
Responsible Party: Sony Electronics Inc.
Address: 16530 Via Esprillo,
San Diego, CA 92127 U.S.A.
Telephone Number: 858-942-2230
This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
NOTICE
This notice is applicable for USA/Canada only.
If shipped to USA/Canada, install only a UL LISTED/CSA
LABELLED power supply cord meeting the following
specifications:
SPECIFICATIONS
Plug Type Nema-Plug 5-15p
Cord Type SVT or SJT, minimum 3 × 18 AWG
Length Maximum 15 feet
Rating Minimum 7 A, 125 V
NOTICE
Cette notice s’applique aux Etats-Unis et au Canada
uniquement.
Si cet appareil est exporté aux Etats-Unis ou au Canada, utiliser
le cordon d’alimentation portant la mention UL LISTED/CSA
LABELLED et remplissant les conditions suivantes:
SPECIFICATIONS
Type de fiche Fiche Nema 5-15 broches
Cordon Type SVT ou SJT, minimum 3 × 18 AWG
Longueur Maximum 15 pieds
Tension Minimum 7 A, 125 V
As an ENERGY STAR Partner, Sony
Corporation has determined that this product
meets the ENERGY STAR guidelines for
energy efficiency.

Question & answers

There are no questions about the Sony SDM-G96X yet.

Ask a question about the Sony SDM-G96X

Have a question about the Sony SDM-G96X but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Sony SDM-G96X. Please make sure that you describe your difficulty with the Sony SDM-G96X as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.