Sony DPF-D92 manual

View a manual of the Sony DPF-D92 below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Sony
  • Product: Digital Photo Frame
  • Model/name: DPF-D92
  • Filetype: PDF
  • Available languages: Dutch, English, Italian

Table of Contents

Page: 0
4-129-231-13 (1)
P/N7525000004E
Digital Photo
Frame
DPF-D82/D92
© 2009 Sony Corporation
Before operation
Basic operations
Advanced operations
Using an external device
(with Bluetooth)
Using an external device
(with a computer)
Error messages
Troubleshooting
Additional information
Operating Instructions
Before operating this unit, please read this manual thoroughly and
retain it for future reference.
Owner’s Record
The model and serial numbers are located at the rear.
Record the serial number in the space provided below. Refer to
these numbers whenever you call upon your Sony dealer
regarding this product.
Model No. DPF-D82/D92
Serial No. ________________________
Page: 1
2 GB
To reduce fire or shock hazard, do not
expose the unit to rain or moisture.
Do not expose the batteries to
excessive heat such as sunshine, fire
or the like.
CAUTION
Replace the battery with the specified
type only. Otherwise, fire or injury
may result. Dispose of used batteries
according to the instructions.
For the customers in the U.S.A.
CAUTION
You are cautioned that any changes or modifications
not expressly approved in this manual could void
your authority to operate this equipment.
If you have any questions about this product, you may
call:
Sony Customer Information Services Center
1-800-222-SONY (7669)
The number below is for the FCC related matters
only.
Regulatory Information
Note:
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to
radio or television reception, which can be
determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by
one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and
receiver.
– Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
– Consult the dealer or an experienced radio/TV
technician for help.
WARNING
Declaration of Conformity
Trade Name: SONY
Model No.: DPF-D92
Responsible Party: Sony Electronics Inc.
Address: 16530 Via Esprillo, San Diego,
CA 92127 U.S.A.
Telephone No.: 858-942-2230
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
Declaration of Conformity
Trade Name: SONY
Model No.: DPF-D82
Responsible Party: Sony Electronics Inc.
Address: 16530 Via Esprillo, San Diego,
CA 92127 U.S.A.
Telephone No.: 858-942-2230
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
Page: 2
3 GB
For the State of California, USA
only
Perchlorate Material - special handling may apply,
See
www.dtsc.ca.gov/hazardouswaste/perchlorate
Perchlorate Material: Lithium battery contains
perchlorate.
For the Customer in Europe
This product has been tested and found compliant
with the limits set out in the EMC Directive for using
connection cables shorter than 3 meters (9.8 feet).
Attention
The electromagnetic fields at the specific frequencies
may influence the picture of this digital photo frame.
Notice
If static electricity or electromagnetism causes data
transfer to discontinue midway (fail), restart the
application or disconnect and connect the
communication cable (USB, etc) again.
Disposal of Old Electrical &
Electronic Equipment (Applicable in
the European Union and other
European countries with separate
collection systems)
This symbol on the product
or on its packaging indicates
that this product shall not be
treated as household waste.
Instead it shall be handed
over to the applicable
collection point for the
recycling of electrical and
electronic equipment. By
ensuring this product is
disposed of correctly, you
will help prevent potential
negative consequences for
the environment and human health, which could
otherwise be caused by inappropriate waste handling
of this product. The recycling of materials will help to
conserve natural resources. For more detailed
information about recycling of this product, please
contact your local Civic Office, your household waste
disposal service or the shop where you purchased the
product.
Disposal of waste batteries
(applicable in the European Union
and other European countries with
separate collection systems)
This symbol on the battery or on the
packaging indicates that the battery
provided with this product shall not
be treated as household waste. By
ensuring these batteries are disposed
of correctly, you will help prevent
potentially negative consequences for
the environment and human health which could
otherwise be caused by inappropriate waste handling
of the battery. The recycling of the materials will help
to conserve natural resources. In case of products that
for safety, performance or data integrity reasons
require a permanent connection with an incorporated
battery, this battery should be replaced by qualified
service staff only. To ensure that the battery will be
treated properly, hand over the product at end-of-life
to the applicable collection point for the recycling of
electrical and electronic equipment. For all other
batteries, please view the section on how to remove
the battery from the product safely. Hand the battery
over to the applicable collection point for the
recycling of waste batteries.
For more detailed information about recycling of this
product or battery, please contact your local Civic
Office, your household waste disposal service or the
shop where you purchased the product.
Notice for the customers in the
countries applying EU Directives
The manufacturer of this product is Sony
Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-
0075 Japan. The Authorized Representative for EMC
and product safety is Sony Deutschland GmbH,
Hedelfinger Strasse 61, 70327 Stuttgart, Germany.
For any service or guarantee matters please refer to
the addresses given in separate service or guarantee
documents.
Continued
Page: 3
4 GB
Notes on LCD screen
• Do not press against the LCD screen. The screen
may be discolored and that may cause a
malfunction.
• Exposing the LCD screen to direct sunlight for long
periods may cause malfunctions.
• The LCD screen is manufactured using extremely
high-precision technology, so over 99.99% of the
pixels are operational for effective use. However,
there may be some tiny black points and/or bright
points (white, red, blue or green in color) that
constantly appear on the LCD screen. These points
are normal in the manufacturing process and do not
affect the viewing in any way.
• Images may trail across on the LCD screen in a cold
location. This is not a malfunction.
On trademarks and copyrights
• , Cyber-shot, , “Memory
Stick”, , “Memory Stick Duo”,
, “MagicGate Memory
Stick”, “Memory Stick PRO”,
, “Memory Stick PRO Duo”,
, “Memory Stick PRO-HG
Duo”, , “Memory Stick
Micro”, , , “Memory Stick-
ROM”, , “MagicGate”, and
are trademarks or registered
trademarks of Sony Corporation.
• Microsoft, Windows, and Windows Vista are
registered trademarks of Microsoft Corporation in
the United States and/or other countries.
• Macintosh and Mac OS are registered trademarks of
Apple Inc. in the United States and/or other
countries.
• CompactFlash is a trademark of SanDisk
Corporation in the U.S.A.
• or xD-Picture Card™ is a trademark of
FUJIFILM Corporation.
• The Bluetooth word mark and logos are owned by
the Bluetooth SIG, Inc. and any use of such marks
by Sony Corpration is under licence. Other
trademarks and trade names are those of their
resective owners.
• Contains iTypeTM
and fonts from Monotype
Imaging Inc.
iTypeTM
is a trademark of Monotype Imaging Inc.
• All other companies and product names mentioned
herein may be the trademarks or registered
trademarks of their respective companies.
Furthermore, “™” and “®
” are not mentioned in
each case in this manual.
• This unit is equipped with face recognition feature.
Sony Face Recognition technology developed by
Sony is used.
Duplication, edition, or printing of a CD, TV
programs, copyrighted materials such as pictures or
publications, or any other materials except for your
own recording or creation is limited to private or
domestic use only. Unless you hold copyright or
have permission of copyright holders for the
materials to be duplicated, use of those materials
beyond this limit may infringe the provisions of the
copyright law and be subject to the copyright
holders claim for damages.
When using photo images with this digital photo
frame, pay special attention not to infringe the
provisions of the copyright law. Any unauthorized
use or modification of there’s portrait may also
infringe their rights.
For some demonstrations, performances, or
exhibits, photography may be forbidden.
Backup recommendations
To avoid potential risk of data loss caused by
accidental operation or malfunction of the digital
photo frame, we recommend that you save a
backup copy of your data.
Information
IN NO EVENT SHALL SELLER BE LIABLE
FOR ANY DIRECT, INCIDENTAL OR
CONSEQUENTIAL DAMAGES OF ANY
NATURE, OR LOSSES OR EXPENSES
RESULTING FROM ANY DEFECTIVE
PRODUCT OR THE USE OF ANY PRODUCT.
Sony shall assume no responsibility for any
accidental or consequential damages or loss of the
recording contents which may be caused by use or
malfunction of the digital photo frame or memory
card.
Page: 4
5 GB
Notice for users
Program © 2009 Sony Corporation
Documentation © 2009 Sony Corporation
All rights reserved. This manual or the software
described herein, in whole or in part, may not be
reproduced, translated or reduced to any machine
readable form without prior written approval from
Sony Corporation.
IN NO EVENT SHALL SONY CORPORATION BE
LIABLE FOR ANY INCIDENTAL,
CONSEQUENTIAL OR SPECIAL DAMAGES,
WHETHER BASED ON TORT, CONTACT, OR
OTHERWISE, ARISING OUT OF OR IN
CONNECTION WITH THIS MANUAL, THE
SOFTWARE OR OTHER INFORMATION
CONTAINED HEREIN OR THE USE THEREOF.
Sony Corporation reserves the right to make any
modification to this manual or the information
contained herein at any time without notice.
The software described herein may also be governed
by the terms of a separate user license agreement.
Any design data such as sample pictures provided in
this software cannot be modified or duplicated except
for the purpose of personal use. Any unauthorized
duplication of this software is prohibited under
copyright law.
Please note that unauthorized duplication or
modification of portraits or copyrighted work could
infringe the rights reserved by rights holders.
On the illustrations and screen
shots used in this manual
The illustrations and screen shots used in this
manual are of the DPF-D92 unless noted
otherwise.
The illustrations and screen shots used in this
manual may not be identical to those actually
used or displayed.
Page: 5
6 GB
Table of Contents
Before operation
Enjoying your photo frame in various
ways ...............................................8
Features ..........................................9
Checking included items ...............11
Identifying the parts .....................11
Basic operations
Preparing the remote control ........15
Setting the stand ..........................16
To display the photo frame on
the wall .........................................17
Connecting to the AC power
source ..........................................18
Turning the photo frame on ..........19
Setting the current time ................20
Inserting a memory card ..............21
Changing the display ....................23
Slideshow display .........................24
Clock and calendar display ...........25
Single view mode .........................26
Index image display ......................27
Advanced operations
Enjoying a slideshow ....................29
Changing the settings of
the slideshow ................................. 29
Refresh mode ...............................32
Adding images to the internal
memory ........................................32
Exporting an image .......................34
Deleting an image .........................36
Registering a mark .......................37
Searching for an image
(Filtering) ......................................39
Specifying the playback device .....40
Adjusting the image size and
position ...................................40
Enlarging/reducing an image ..........40
Rotating an image ...........................41
Changing the settings of the auto
power on/off function ...................42
Using the alarm function ..............43
Setting the alarm ............................43
Setting the time to be alarmed ........44
Changing the settings ...................44
Setting procedure ...........................44
Items to set .....................................46
Displaying images on a USB
memory ........................................48
Using an external device
(with Bluetooth)
Transferring images using
Bluetooth.......................................49
Using an external device
(with a computer)
Connecting to a computer ............51
System requirements ......................51
Page: 6
7 GB
Connecting to a computer to exchange
images ...........................................51
Disconnecting your computer ........52
Error messages
If an error message appears .........53
Troubleshooting
If trouble occurs ...........................55
Additional information
Precautions ..................................60
Safety .............................................60
Installation .....................................60
Cleaning .........................................60
Restrictions on duplication .............61
Disposing of the photo frame ..........61
About memory cards ....................61
“Memory Stick” ..............................61
SD memory card ............................62
xD-Picture Card .............................62
CompactFlash card ........................62
Notes on using a memory card .......63
Specifications ...............................64
Index ............................................66
Page: 7
8 GB
Before operation
Enjoying your photo frame in various ways
The Sony DPF-D82/D92 is a digital photo frame for easily displaying images taken with a digital
camera or other device, without using a computer.
Page: 8
9 GB
Before
operation
Features
xSupport for various memory cards*
Supports various memory cards and other
devices, such as a “Memory Stick”,
CompactFlash card, SD memory card, xD-
Picture Card, and USB memory. Just insert a
memory card removed from a digital camera
or other device, and you will be able to view
the images immediately. (.page 21, 48)
xVarious display functions
You can enjoy various viewing modes, such
as the slideshow display, Clock and calendar
display, Single view mode, and Index image
display. (.page 23)
xVarious modes
The displayed image can be switched
automatically as though you are turning the
pages of an album yourself. You can select
from various modes, including just images, a
clock, or calendar view. You can also change
playback settings such as the playback order.
(.page 29)
xAdding images to internal memory
The images you add to the album are saved
in internal memory. (.page 32)
xExporting images
You can export images in the album to your
memory card. (.page 34)
Continued
Page: 9
10 GB
xSearch function
You can search for images by the date,
folder, image direction, and mark.
(.page 39)
xAlarm function
The photo frame announces the specified
time on the image and using sound.
(.page 43)
xAutomatic rotation of images
The photo frame automatically rotates
images to their proper orientation. Images
are also automatically rotated when the
photo frame is set in either the portrait or
landscape position. (.page 16)
xEasy transfer of images taken with a
Bluetooth compatible mobile phone
or other device*
You can transfer images to the photo frame's
internal memory from a Bluetooth
compatible device via a Bluetooth adaptor
(optional). (.page 49)
xDisplaying images on a wall
You can hang the photo frame on the wall.
(.page 17)
* We do not guarantee proper operations for all types
of devices.
Page: 10
11 GB
Before
operation
Checking included
items
Make sure that the following items are
included.
• Digital photo frame (1)
• Stand (1)
• Remote control (1)
• AC adaptor (1)
• Operating Instructions (this manual) (1)
• Read This First (1)
• Warranty (1)
(In some regions, the warranty is not
supplied.)
Identifying the parts
For details, see the pages indicated in the
parentheses.
The illustrations are of the DPF-D92. The
locations and names of buttons and connectors
of the DPF-D82 are identical to those of the
DPF-D92, although the LCD screen size and
shape is different.
Front
A LCD screen
B Remote sensor
When using the supplied remote control, point
it at this sensor.
Continued
Page: 11
D:\DPF series\V Series\4129231131\4129231131\4129231131DPFD92CED\01GB-DPFD92CED\030C01.fm
Master: Left
DPF-D82/D92 4-129-231-13 (1)
12 GB
Rear
A Connector for USB A/Bluetooth
adaptor (.page 49)
Connect a Bluetooth adaptor (optional:
DPPA-BT1) when you want to transfer
images wirelessly from a BLUETOOTH
compatible mobile phone or digital camera.
You can also connect a USB memory
compatible with USB mass storage.
B USB B connector (.page 51)
Connect a USB cable when you want to use
the photo frame with a computer.
C Stand (.page 16)
D DC IN 12 V jack (.page 18)
Insert the plug of the supplied AC adaptor to
this jack, and connect to the wall outlet.
E Power Switch (.page 19)
F “Memory Stick PRO” (Standard/
Duo) slot (.page 21)
G Access lamp
H Standby indicator
I 1 (on/standby) button
J MENU button
Displays the menu.
From the menu, you can operate the same
functions as those of the buttons on the
remote control, such as [Slideshow Settings],
[Rotate], [Add to album] and [Date/time
settings].
K Direction (B/b/v/V) buttons,
Press B/b/v/V to select the menu items. Then
press to enter the selection.
L BACK button
Returns to the previous screen.
M Reset switch (.page 58)
The date/time setting, alarm settings, and the
auto power on/off settings return to their
factory default setting. Use a long, thin object,
such as a pin, to push the switch.
N CompactFlash card/Microdrive
slot (.page 21)
O SD memory card/MMC/xD-Picture
Card slot (.page 21)
030C01.fm Page 12 Wednesday, April 8, 2009 8:58 AM
Page: 12
13 GB
Before
operation
P Buzzer
Q VIEW MODE button (.page 23)
R Alarm switch (.page 43)
S Holes for hanging unit on the wall
(.page 17)
T Space for storing the stand
Continued
Page: 13
14 GB
Remote control A VIEW MODE button (.page 23)
B SLIDE-SHOW ( ) button
(.page 23)
C INDEX ( ) button (.page 23)
D SINGLE ( ) button
(.page 23)
E MENU button
F BACK button
G 1 (on/standby) button
H CLOCK ( ) button (.page 23)
I Zoom in ( )/Zoom out ( ) buttons
(.page 40)
J ALBUM ( ) button (.page 32)
K Direction (B/b/v/V) buttons
L (enter) button
M ROTATE ( ) button
(.page 40)
Page: 14
15 GB
Basic
operations
Basic operations
Preparing the remote
control
The supplied lithium battery (CR2025) has
already been inserted into the remote control.
Pull out the protective sheet before use as
shown in the figure.
Using the remote control
Point the top end of the remote control towards
the remote sensor on the photo frame.
Note
The photo frame may fall if you use the buttons on the
photo frame when it is hanging on the wall. Operate
the photo frame using the remote control.
Replacing the battery of the
remote control
If the remote control stops working, replace the
battery (CR2025 lithium battery) with a new
one.
1 Pull out the battery holder.
While pressing in the tab of the battery
holder, pull out the battery holder.
2 Remove the old battery from the
battery holder and then insert a new
battery.
Insert the battery so that “+” is facing
upwards.
3 Reinsert the battery holder into the
remote control.
Notes
• When the lithium battery becomes weak, the
operating distance of the Remote control may
shorten, or the Remote control may not function
properly. In this case, replace the battery with a
Sony CR2025 lithium battery. Use of another
battery may present a risk of fire or explosion.
Protective sheet
Remote
sensor
WARNING
Battery may explode if mistreated. Do not
recharge, disassemble or dispose of in fire.
Continued
Page: 15
16 GB
• Using a battery other than the specified one may
result in the battery rupturing.
• Dispose of used batteries as specified by the local
authorities.
• Do not leave the remote control in a very hot and
humid place.
• Take care that no foreign objects get inside the
remote control when you, for example, replace the
battery.
• Incorrect use of the battery may cause leaking and
corrosion.
– Do not recharge the battery.
– When the remote control will not be used for a
long period of time, remove the battery from the
remote control to prevent leaking and corrosion.
– Incorrectly inserting, shorting, dismantling, or
heating the battery, or throwing it into a fire
may cause the battery to rupture or leak.
About descriptions in this
manual
The operations described in this manual are
based on remote control operation. When an
operation is performed differently, for example,
with the remote control and the buttons on the
photo frame, it will be explained in a tip.
Setting the stand
1 Hold the photo frame tightly and
insert the stand straight into the
screw hole on the rear panel.
2 Screw the stand into the screw hole
firmly until the stand stops turning.
Setting to portrait or landscape
orientation
You can set the photo frame to portrait or
landscape orientation by rotating it without
moving the stand.
Page: 16
17 GB
Basic
operations
When the photo frame is placed in the portrait
orientation, the image is also automatically
rotated to its proper orientation.
The directions indicated on the direction button
on the rear panel depend on the orientation of
the photo frame.
Notes
• Check whether the stand is stable. If the stand is not
set properly, the photo frame may fall over.
• When the photo frame is placed in the portrait
orientation, the Sony logo doesn't light up.
• The photo frame does not detect and rotate the
orientation of images when [Auto display
orientation] of [General Settings] on the
(Settings) tab is set to [OFF].
• A magnet is contained in the storage portion of the
stand. Do not keep anything that is easily affected
by magnetism, such as a cash card or credit card,
near the photo frame. If you place the photo frame
near a CRT-based television, the color of the TV’s
display may be changed.
Tip
It is easier to turn the stand if you wind or wrap a
rubber band tightly around the stand when you
remove the stand from the photo frame.
To display the photo
frame on the wall
You can hang the photo frame on the wall
using the following procedure.
1 Prepare screws (not supplied)
suitable for the screw holes on the
rear panel.
2 Screw the screws (not supplied) into
the wall.
Be sure the screws (not supplied) protrude
between 2.5 to 3mm (1
/8 inch) from the
surface of the wall.
3 Hang the photo frame on the wall by
fitting the hole on the rear panel to
the screws on the wall.
Notes
• Use screws suitable for the quality of the material of
the wall. The screws may be damaged, depending
on the type of material used in the wall. Set the
screws in a pillar or stud in the wall.
4mm (3
/16 inch)
More than 25mm (1 inch)
4.2mm
(3
/16 inch)
8.6mm
(11
/32 inch)
Holes for hanging
the unit on the wall
Between
2.5mm to 3mm
(1/8 inch)
Continued
Page: 17
18 GB
• When you want to re-insert the memory card,
remove the photo frame from the wall, then eject
and re-insert the memory card while the photo
frame is placed on a stable surface.
• Store the stand in the place provided when you hang
the photo frame on the wall.
• Connect the plug of the supplied AC adaptor to the
photo frame and set the power switch to ON. And
then connect the AC adaptor to the wall outlet after
hanging the photo frame on the wall.
• We take no responsibility for any accidents or
damage caused by defects of attachment, misuse, or
natural disasters, etc.
Connecting to the AC
power source
1 Insert the plug of the AC adaptor
into the DC IN 12 V jack on the rear
of the photo frame.
2 Connect the AC adaptor to the wall
outlet.
Notes
• The socket outlet should be as close as possible to
the unit, and easily accessible.
• Do not place the photo frame in an unsteady
location such as on an unsteady table or tilted
surface.
• Connect the AC adaptor to an easily accessible wall
outlet close by. If trouble occurs while using the
adaptor, immediately shut off the power by
disconnecting the plug from the wall outlet.
• Do not short the plug of the AC adaptor with a
metal object. Doing so may cause a malfunction.
• Do not use the AC Adaptor placed in a narrow
space, such as between a wall and furniture.
AC adaptor
To wall outlet
To the DC IN 12 V jack
Page: 18
19 GB
Basic
operations
• Insert the plug of the AC adaptor firmly, if the
connection is loose, the photo frame may turn off
when it is moved.
• After use, remove the AC adaptor from the
DC IN 12 V jack of the photo frame, and remove
the AC adaptor from the outlet.
• Even if your photo frame is turned off, AC power
(house current) is still supplied to it while connected
to the wall outlet via the AC adaptor.
• Do not turn the photo frame off or disconnect the
AC adaptor from the photo frame before the
standby indicator turns red. Doing so may damage
the photo frame.
Turning the photo frame
on
When the power switch is set to
off
When the power switch is set to on, the standby
indicator turns green and the Sony logo on the
front panel lights up.
When the power switch is set to
on
Press 1 (on/standby) on the photo frame or
remote control to turn on the power. The
standby indicator turns to green from red. The
Sony logo on the front panel lights up.
Continued
Page: 19
20 GB
Turning off the power
Hold 1 (on/standby) on the photo frame or
remote control until the power turns off. The
standby indicator turns to red from green.
Note
Do not turn the photo frame off or disconnect the AC
adaptor from the photo frame before the standby
indicator turns red. Doing so may damage the photo
frame.
Operations in an initial state
When the photo frame is turned on without a
memory card connected, the initial display
below appears on the screen.
If the photo frame is not operated for 10
seconds, the demo mode is displayed. If any
other button than the power button is pressed,
the screen returns to the initial display.
First, press MENU during the initial display,
and then set the date and time.
Setting the current time
The clock of the photo frame needs to be
adjusted in order to display an accurate time in
the clock and calendar view modes.
1 Press MENU.
The menu screen is displayed.
2 Press B/b to select the
(Settings) tab.
The settings screen is displayed.
Tip
You can use the B/b button only when a
memory card is inserted in the photo frame, an
external device is connected, or anything other
than the clock and calender settings item
(page 25) are selected.
3 Press v/V to select [Date/time
settings] and then press .
The Date/time settings screen is displayed.
4 Adjust the date.
1Press v/V to select [Date] and then
press .
2Press B/b to select month, day, and
year, and then press v/V to select a
value, then press .
5 Adjust the time.
1Press v/V to select [Time] and then
press .
2Press B/b to select hour, minute, and
second, and then press v/V to select a
value, then press .
Page: 20
21 GB
Basic
operations
6 Select the format of the date.
1Press v/V to select [Date Display Order]
and then press .
2Press v/V to select a format and then
press .
• Y-M-D
• M-D-Y
• D-M-Y
7 Set the day to start the week for the
calendar.
You can set the day that appears on the
very left when the calendar is displayed.
1Press v/V to select [First Weekday] and
then press .
2Press v/V to select [Sunday] or
[Monday] and then press .
8 Select the time display.
1Press v/V to select [12hr/24hr display]
and then press .
2Press v/V to select [12 hours] or
[24 hours] and then press .
9 Press MENU.
The menu screen is closed.
Inserting a memory card
Insert the memory card firmly into the
corresponding slot with its label side
facing toward you (when you are facing
the back side of the photo frame).
The access lamp flashes when the memory card
is inserted correctly. Reinsert the memory card
after checking the label side of the memory
card if the access lamp does not flash.
For details on the memory cards you can use
with this photo frame, see pages 61 to 63.
Insert the memory card firmly into the
corresponding slot with its label side facing
toward you. The slot order from the top is
“Memory Stick” (“Memory Stick Duo”),
CompactFlash card, SD memory card and xD-
Picture Card.
Access lamp
Continued
Page: 21
22 GB
To remove a memory card
Remove the memory card from its slot in the
opposite direction from which it was inserted.
Notes
• When inserting the memory card, it will only insert
part of the way, so do not try to force it as this could
damage the memory card and/or photo frame.
• This photo frame has a slot that is both a “Memory
Stick” standard and Duo size compatible slot, so
you do not need a “Memory Stick” adaptor.
• The SD memory card/xD-Picture Card dual-
purpose slot automatically detects the card type.
• Before using a memory card, see “About memory
cards” on page 61.
Display priority of images
If a memory card is inserted or an external device is
connected, the images of the inserted memory card or
connected device are displayed automatically.
To manually change the memory card or external
device to be displayed, specify it in (Select
device) menu (page 40).
The photo frame displays the images of the
memory card in the following priorities.
• Memory card / The device connected to the USB
A/Bluetooth connector t internal memory
• If multiple memory cards are inserted when the
photo frame is turned on, the images of the first
memory card you inserted take priority and are
displayed.
• If multiple devices are inserted while the photo
frame is turned off, and then the photo frame is
turned on, the images of the device displayed when
the photo frame is turned off take the first priority
and are displayed. A device connected to the USB
A/Bluetooth connector, however, may not be able to
take priority.
• If a memory card is replaced while the photo
frame is turned off, and then the photo frame is
turned on, the images are displayed in the
following priorities:
“Memory Stick” b CompactFlash card
b SD memory card b xD-Picture Card b the device
connected to the USB A/Bluetooth connector b
internal memory
• If no memory card is inserted and no device is
connected, the images saved in the album in the
internal memory are displayed.
Notes
• Due to one of the characteristics of the internal
memory device, images stored for long time or read
many times may be subject to data error when read
too often.
• For the file formats that the photo frame can
display, see page 64.
Page: 22
23 GB
Basic
operations
Changing the display
1 Press VIEW MODE.
The view mode screen is displayed.
2 Select the group you want.
Tip
Select the group you want using B/b after
moving the cursor to the group area using B/b/
v/V, when you operate the photo frame using
the buttons on the photo frame.
3 Press B/b/v/V or VIEW MODE to
select the style you want and then
press .
Note
If you have not operated the photo frame for an
extended period of time, the style the cursor is on will
be selected automatically.
Group Explanation
Slideshow
Displays a slideshow display
style.
Clock and
calendar
Displays a clock or calendar
style.
Displays a single image
style.
Index
Displays a thumbnail list
style.
Page: 23
24 GB
Slideshow display
Tips
• If the power is on, and no memory card is inserted,
and no device is connected, the images stored in
internal memory are displayed. If no images are
saved in internal memory, demonstration mode
starts automatically. Demonstration mode ends if a
button other than 1 (on/standby) is pressed.
• For details on the playback order in a slideshow
display, see page 46.
• You can set the interval, effect, listing order, or
color effect when you select the slideshow display.
Refer to “Slideshow Settings” (page 31).
• You can select the single view mode when you
press on the photo frame when the image you
want appears in the slideshow display.
• You can use the VIEW MODE button on the photo
frame.
Group Image Style Explanation
Slideshow
A Single view Displays one image after another.
B Multi image view Displays multiple images at the same time.
C Clock view Displays images with the present date and time.
D Calendar view Displays images, one after another, while
showing a calendar. The present date and time
is displayed.
E Time Machine Displays images with the shooting date and
time. The present date and time cannot be
displayed.
F Random view Displays images while randomly switching
between a number of different slideshow styles
and effects.
A B C D
E F
Page: 24
25 GB
Basic
operations
Clock and calendar display
Note
You can select only the (Settings) tab when the
Clock and calendar display is displayed.
Tip
You can use the VIEW MODE button on the photo
frame.
Clock1 Clock2 Clock3 Clock4 Clock5
Clock6 Clock7 Clock8 Clock9 Clock10
Clock11
Calendar1 Calendar2 Calendar3
Lunar Calendar
(when you select
[Simplified
Chinese] in
[Language setting])
Arabic Calendar
(when you select
[Arabic] in
[Language setting])
Farsi Calendar
(when you select
[Persian] in
[Language setting])
Page: 25
26 GB
Single view mode
Tips
• If the power is on, and no memory card is inserted,
and no device is connected, the images stored in
internal memory are displayed. If no images are
saved in internal memory, demonstration mode
starts automatically. Demonstration mode ends if a
button other than 1 (on/standby) is pressed.
• You can set the image display mode by pressing
VIEW MODE and pressing B/b to select either
entire image or fit to screen mode. Not all images
are able to use the fit to screen mode.
• You can use the VIEW MODE button on the photo
frame.
Group Image Style Explanation
A Entire image Displays an entire image in the screen. You can
switch the images to be displayed by pressing
B/b.
B Fit to screen Displays an image over the whole screen. You
can switch the images to be displayed by
pressing B/b.
C Entire image (with
Exif)
Displays image information, such as the image
number, file name, and shooting date while
displaying the entire image. You can switch the
images to be displayed by pressing B/b.
Refer to “About the information display”
(page 28) for details on the image information.
D Fit to screen (with
Exif)
Displays image information, such as the image
number, file name, and shooting date in fit to
screen mode. You can switch the images to be
displayed by pressing B/b.
Refer to “About the information display”
(page 28) for details on the image information.
A B C D
Page: 26
27 GB
Basic
operations
Index image display
Tips
• A thumbnail is a small-sized image for index use
that is recorded in the pictures taken by a digital
camera.
• If the power is on, and no memory card is inserted,
and no device is connected, the images in internal
memory are displayed. If no images are saved in
internal memory, demonstration mode starts
automatically. Demonstration mode ends if a button
other than 1 (on/standby) is pressed.
• You can select the single view mode when you
press on the photo frame when the image you
want appears in the index image display.
• You can use the VIEW MODE button on the photo
frame.
Group Image Style Explanation
Index
A Index 1 Displays a list of large thumbnails. You can
select an image by pressing B/b/v/V.
B Index 2 Displays a list of thumbnails. You can select an
image by pressing B/b/v/V.
C Index 3 Displays a list of small thumbnails. You can
select an image by pressing B/b/v/V.
A B C
Continued
Page: 27
28 GB
About the information display
The following information is displayed.
1Display type
– Entire image
– Fit to screen
– Entire image (with Exif)
– Fit to screen (with Exif)
2Ordinal number of the displayed image/Total
number of images
Input media indication for the displayed
image is shown as follows:.
3Image details
– File format (JPEG(4:4:4), JPEG(4:2:2),
JPEG(4:2:0), RAW)
– Number of pixels (width × height)
– Manufacturer name of image input device
– Model name of image input device
– Shutter speed (e.g.: 1/8)
– Aperture value (e.g.: F2.8)
– Exposure value (e.g.: +0.0EV)
– Rotation information
4Setting information
5Image number (folder-file number)
This is displayed if the image is DCF
compliant.
If the image does not comply with DCF, up
to 10 characters of its file name are
displayed.
6Shooting date/time
Icons Meaning
“Memory Stick” input
SD Memory Card input
CompactFlash input
xD-Picture Card input
External Device input
Internal memory input
Icons Meaning
Protect indication
Associated file indication
(Displayed when there is an
associated file such as a motion
file or a miniature e-mail image
file.)
Displays when you have
registered a mark.
Page: 28
29 GB
Advanced
operations
Advanced operations
Enjoying a slideshow
You can display images stored in the internal
memory or on a memory card, one after
another, automatically.
When you turn on the photo frame, the
slideshow plays continuously from the
previous play.
1 Press VIEW MODE.
The view mode screen is displayed.
2 Select (slideshow).
Tip
Select (slideshow) using B/b after moving
the cursor to the group area using B/b/v/V
when you operate the photo frame using the
buttons on the photo frame.
3 Press B/b/v/V to select the style you
want, then press .
Refer to “Slideshow display” (page 24)
for details on the slideshow styles.
1 Press MENU.
The menu is displayed.
2 Press B/b to select the
(Settings) tab.
The settings screen is displayed.
3 Press v/V to select [Slideshow
Settings] and then press .
The slideshow settings screen is
displayed.
4 Press v/V to select the item and
then press .
Refer to the tables on the next page for
details on the setting items.
Notes
• Note the following when you select a slideshow
using the image stored on the memory card.
– Due to one of the characteristics of the memory
card devices, images may be subject to data
error when read too often.
– Do not run a slideshow for a long time with a
small number images. This may cause data
error.
– We recommend you back up images on the
memory card often.
• When the photo frame is, for instance, displaying a
slideshow, changes to the settings of some items are
unavailable. These items are displayed in gray and
cannot be selected.
• The slideshow starts from the first image if you set
the power switch to OFF before entering the
standby mode, if you reset the photo frame.
Changing the settings of the
slideshow
Continued
Page: 29
30 GB
• When the screen is too bright, it may make you feel
nauseous. Be careful that you do not make the
brightness settings too bright when you use the
photo frame.
Tip
You can also use the VIEW MODE button on the
photo frame.
Page: 30
31 GB
Advanced
operations
*: Factory default settings
Item Setting Description
Slideshow
Settings
Interval Set a value from 3 sec., 7 sec.*, 20 sec., 1 min., 5 min., 30 min., 1 hour,
3 hours, 12 hours, 24 hours for the interval between images.
Note
An image may not switch at the intervals you set on the menu, depending
on the style of the slideshow, color effect, or image size.
Effect Center cross Transitions to the next image as though the previous
image is being pushed from the center to the four
corners.
Vert. blinds Transitions to the next image as though blinds are
being lowered vertically.
Horiz. blinds Transitions to the next image as though blinds are
being pulled horizontally.
Fade* Transitions to the next image by fading out the current
image and fading in the next image.
Wipe Transitions to the next image as though the current
image is being wiped off the screen to reveal the next
image.
Random Uses the above five effects randomly.
Shuffle ON Displays images randomly.
OFF* Displays images according to the [Listing Order]
setting of [General Settings].
Color effect Color* Displays an image in color.
Sepia Displays an image in a sepia color.
Monochrome Displays an image in monochrome.
Display Mode Select the desired display size from the following:
Note
The original image data will not change.
Entire image* Displays an entire image enlarged to proper size. (An
image may be displayed with margins on the top,
bottom, left and right.)
Fit to screen Zooms in at the center of the image enough to fill the
whole screen.
Note
An image may not display with the display size you set
on the menu, depending on the style of the slideshow.
Page: 31
32 GB
Refresh mode
Due to one of the characteristics of the device,
images stored for a long time or read many
times may be subject to data error when read
too often.
This photo frame refreshes the internal memory
automatically to prevent these errors,
depending on the status of the internal memory.
The confirmation screen used for refreshing the
internal memory is displayed automatically
when the refresh is needed.
The refresh starts when you select [OK]. The
Refresh also starts automatically when no
operation is attempted for 30 seconds. If you
select [Cancel], the confirmation screen used
for refreshing the internal memory is displayed
the next time.
Do not turn the photo frame to OFF while the
internal memory is being refreshed. It may
cause a malfunction.
It may take approximately 5 minutes to refresh
the internal memory.
Notes
• We recommend that you perform a backup of your
data periodically to avoid losing it.
• Do not run a slideshow with less than 10 images
continuously if you have set the interval time for the
slideshow to 3 seconds. You may not be able to
protect some images in the internal memory.
Adding images to the
internal memory
You can use the photo frame as a digital album,
saving important images in the internal
memory.
Tip
In [Image file size] of the menu, you can preset
whether to optimize the size of images or save images
as is, without compressing them, when you save them
to the internal memory (page 46).
When [Image file size] is set to [Album], up to
approx. 2,000 images can be added to the album.
When set to [Original], the number of images that can
be saved may vary, depending on the original image
file size.
1 Press (Album) when an image
stored on the memory card or the
external device is displayed on the
screen.
Tip
Select [Add to album] using v/V after pressing
the MENU button and then select
(Editing) using B/b.
Single image display
Page: 32
33 GB
Advanced
operations
Slideshow display
Index image display
2 Press v/V to select [Add this image],
[Selected images] or [Add all
images] and then press .
If you select [Add this image], the image
currently displayed is added to the album.
Go to step 4. (This item cannot be selected
on the slideshow display.)
If you select [Selected images], you can
select the image you want to add from the
image list. Go to step 3.
If you select [Add all images], the image
list is displayed. A check mark is attached
to the check box of all the images. Go to
step 4.
3 Specify the image to add from the
image list.
About the image list
During a search: Displays all the images
applicable to the criteria used for the
search.
Other than during a search: Displays all
images in the device displayed on the
screen.
Refer to “Searching for an image
(Filtering)” (page 39).
1Press B/b/v/V to select the image to
add to the album and then press . A
check mark will be attached to the
check box of each selected image.
Repeat this operation to add multiple
images at the same time.
To cancel the selection, select images to
cancel and then press to delete the
check mark in the check box.
2Press MENU.
The confirmation screen used for
selecting a folder is displayed.
4 Press v/V to select the folder you
want and press .
The confirmation screen used to decide
whether to add an image or not to the
internal memory is displayed.
Tip
A new folder is created automatically when you
select [New folder].
5 Press v/V to select [Yes] and then
press .
The image is saved in the specified folder
in internal memory.
Continued
Page: 33
34 GB
6 Press when the confirmation
screen is displayed.
Notes
• Images in the internal memory cannot be added to
the album.
• Do not turn off the power, remove the memory card,
or disconnect the external device while an image is
being added. Doing so may damage the photo frame
or memory card, or damage the data.
Tips
• To perform this operation using the remote control,
press the MENU button on the remote control and
then press v/V to select [Add to album] from
(Editing) and then press .
• You can also use the MENU button on the photo
frame.
• You can change the thumbnail size using [ / ] in
the image list.
• Due to one of the characteristics of the internal
memory device, images stored for long time or read
many times may be subject to data error when read
too often. We recommend that you perform a
backup of your data periodically to avoid losing it.
Exporting an image
You can export the images in the internal
memory to a memory card or external device.
1 Press MENU when an image stored
on the internal device is displayed
on the screen.
The menu is displayed.
2 Press B/b to select the (Editing)
tab.
The screen used for editing is displayed.
3 Press v/V to select [Export] and
then press .
The Export menu is displayed.
Single image display
4 Press v/V to select [Export this
image], [Selected images] or [Export
all images] and then press .
If you select [Export this image], the
image currently displayed is exported to
the device. Go to step 6. (This item cannot
be selected on the slideshow display.)
If you select [Selected images], you can
select the image you want to export from
the image list. Go to step 5.
If you select [Export all images], the
image list is displayed. A check mark is
attached to the check box of all the
images. Go to step 6.
Page: 34
35 GB
Advanced
operations
5 Specify the image to export from the
image list.
About the image list
During a search: Displays all the images
applicable to the criteria used for the
search.
Other than during a search: Displays the
image list of the album on the screen.
Refer to “Searching for an image
(Filtering)” (page 39).
1Press B/b/v/V to select the image you
want to export and then press . A
check mark will be attached to the
check box of each selected image.
Repeat this operation to export multiple
images at the same time.
To cancel the selection, select images to
cancel and then press to delete the
check mark in the check box.
2Press MENU.
The screen used for selecting the device
to which to export is displayed.
6 Press v/V to select the device to
which to export the image and then
press .
7 Press v/V to select the folder you
want to save to and press .
The confirmation screen used to decide
whether to export or not is displayed.
Tip
A new folder is created automatically when you
select [New folder].
8 Press v/V to select [Yes] and then
press .
The exporting is finished.
9 Press when the confirmation
screen is displayed.
The image is copied to the specified
device.
Note
Do not turn off the power, remove the memory card,
or disconnect the external device during exporting.
Doing so may damage the photo frame or memory
card, or damage the data.
Tips
• You can also use the MENU button on the photo
frame.
• You can enlarge or reduce the image to export when
you select the index image display.
• Any device that is not recognized by the photo
frame is displayed in gray and you cannot select it.
Page: 35
36 GB
Deleting an image
1 Press MENU when an image is
displayed on the screen.
The menu is displayed.
2 Press B/b to select the (Editing)
tab.
The screen used for editing is displayed.
3 Press v/V to select [Delete] and
then press .
4 Press v/V to select [Delete this
image], [Selected images] or [Delete
all images] and then press .
If you select [Delete this image], the
image currently displayed is deleted. Go
to step 6. (This item cannot be selected on
the slideshow display.)
If you select [Selected images], you can
select the image you want to delete from
the image list. Go to step 5.
If you select [Delete all images], the
image list is displayed. A check mark is
attached to the check box of all the
images. Go to step 6.
5 Specify the image to delete from the
image list.
About the image list
During a search: Displays all the images
applicable to the criteria used for the
search.
Other than during a search: Displays all
images in the device displayed on the
screen.
Refer to “Searching for an image
(Filtering)” (page 39).
1Press B/b/v/V to select the image to
delete and then press . A check mark
will be attached to the check box of
each selected image.
Repeat this operation to delete multiple
images at the same time.
To cancel the selection, select images to
cancel and then press to delete the
check mark in the check box.
2Press MENU.
The delete confirmation screen is
displayed.
6 Press v/V to select [Yes] and then
press .
The image is deleted.
7 Press when the confirmation
screen is displayed.
To format the internal memory
1 Press MENU.
The menu is displayed.
2 Press B/b to select the (Settings) tab.
The settings screen is displayed.
3 Press v/V to select [Initialize] and then
press .
4 Press v/V to select [Format internal
memory] and then press .
The confirmation screen used for
initializing the internal memory is
displayed.
5 Press v/V to select [Yes], then press .
Notes
• When the message [Cannot delete a protected
image.] appears on the screen, the image file was set
to Read Only on a computer. In this case, connect
the photo frame to a computer, and delete this file
using the computer.
• The total capacity of the internal memory is not
equal to the remaining capacity, even immediately
after initialization.
• If deletion has started, the deleted image cannot be
recovered even if you stop deletion. Delete images
only after confirming you actually want to delete
them.
Page: 36
37 GB
Advanced
operations
Tips
• You can also use the MENU button on the photo
frame.
• You can enlarge or reduce the image when you
select the index image display.
Registering a mark
You can produce a slideshow only with images
which have been selected beforehand and have
been marked. You can easily check for images
with marks using the index image display or
single view mode.
1 Press MENU when an image is
displayed on the screen.
The menu is displayed.
2 Press B/b to select the (Editing)
tab.
The screen used for editing is displayed.
3 Press v/V to select [Marking] and
then press .
4 Press v/V to select the mark you
want and then press .
5 Press v/V to select [Mark this
image], [Selected images] or [Mark
all images] and then press .
If you select [Mark this image], the image
currently displayed will be marked and
showed in the future. Go to step 7. (This
item cannot be selected on the slideshow
display.)
If you select [Selected images], you can
select the image to which you want to
attach a mark from the image list. Go to
step 6.
If you select [Mark all images], the image
list is displayed. A check mark is attached
Continued
Page: 37
38 GB
to the check box of all the images. Go to
step 7.
6 Specify the image to which you want
to attach a mark from the image list.
About the image list
During a search: Displays all the images
applicable to the criteria used for the
search.
Other than during a search: Displays all
images in the device.
Refer to “Searching for an image
(Filtering)” (page 39).
1Press B/b/v/V to select the image to
which to attach and then press . A
check mark will be attached to the
image. Repeat this operation to attach a
mark to multiple images at the same
time.
To cancel the selection, select an
imeges you want to cancel and then
press to remove the check mark
from the check box.
2A mark will be attached to the image
for which a check mark has been placed
in the check box.
If a check mark is removed from the
check box of an image, the mark will be
removed from the image.
7 Press v/V to select [Yes] and then
press .
The mark is attached to the selected
image.
To delete the registration of a
mark
Select [Unmark this image] or [Unmark all
images] and then press in step 5. You can
also cancel the selection when you remove the
check mark from the check box.
[Unmark this image]: Removes a mark from
the image currently displayed. (This item
cannot be selected on the slideshow display.)
[Unmark all images]
During a search: Removes a marks from all the
images applicable to the criteria specified in the
search.
Other than during a search: Removes all marks
from all images stored on the device displayed.
Note
A mark is saved only when it is registered with an
image in the internal memory. A mark registered with
an image on a memory card or an external device is
removed when the power is turned off, or if you
change the device being displayed.
Tips
• You can select a mark from among 3 types.
• You can also use the MENU button on the photo
frame.
• You can enlarge or reduce the image when you
select the index image display.
Page: 38
39 GB
Advanced
operations
Searching for an image
(Filtering)
You can search for an image which is stored in
internal memory or on a memory card. You can
filter an image using various criteria, such as
the date, the folder in which the image is saved,
the orientation of the image or mark, etc.
1 Press MENU when an image is
displayed on the screen.
The menu is displayed.
2 Press B/b to select the (Editing)
tab.
The screen used for editing is displayed.
Note
You cannot select the (Editing) tab when
the clock and calendar are displayed.
3 Press v/V to select [Search] and
then press .
4 Press v/V to select the criteria you
want and then press .
• [Search by date]: Filters by the date.
• [Search by folder]: Filters by the folder.
• [Search by vertical/horizontal]: Filters
by the image orientation.
• [Search by mark]: Filters by the mark.
5 Press v/V to select the item you
want and then press .
To cancel the search for an
image
Press the MENU button when an image is
displayed on the screen and then select [Exit
search (show all photo)].
To change the criteria for a
search
Press the BACK button when an image you
searched for is displayed on the screen.
Notes
• Do not turn off the power, remove the memory card,
or disconnect the external device during a
searching. Doing so may damage the photo frame or
memory card, or damage the data.
• The search is cancelled automatically in the
following cases.
– When you change the playback device
– When you search for an image which is stored
on a memory card or external device and then
remove that memory card or external device
Tip
You can also use the MENU button on the photo
frame.
Page: 39
40 GB
Specifying the playback
device
You can specify the memory card or external
device to be displayed.
1 Press MENU.
The menu is displayed.
2 Press B/b to select the (Select
device) tab.
The screen used for selecting a device is
displayed.
Tip
Insert the device at this point during the
procedure if the device you want to use cannot
be selected.
3 Press v/V to select the device you
want to display and then press .
The images of the selected device are
displayed.
Tips
• You can also use the MENU button on the photo
frame.
• The search is cancelled automatically when you
change the playback device during a search.
Adjusting the image size
and position
You can enlarge or reduce an image in single
view mode.
1 To enlarge an image, press
(zoom in) on the remote control. To
reduce an enlarged image, press
(zoom out).
Each press of the button enlarges the
image further. You can enlarge an image
to a maximum of 5 times the original
scale. You can move an enlarged image
up, down, left, and right.
About crop and save
• The screen currently displayed is saved as it
was trimmed after you press B/b/v/V to
move the enlarged image and then press the
MENU button.
• You can select [Save as new image] or
[Overwrite] by pressing the MENU button
when the image is enlarged or reduced. Press
v/V to select the method used to save the
image.
• If you select [Save as new image], the image
is saved as a new image.
• If you select [Overwrite], the image is
overwritten. A confirmation screen is
displayed when you select [Overwrite]. Press
v/V to select [Yes] and then press to
save the image. Press again when the
confirmation screen is displayed after saving
is finished.
Notes
• Enlarging an image may reduce the quality
depending on the image size.
• It is not possible to enlarge an image using the
buttons on the photo frame.
Enlarging/reducing an image
Page: 40
41 GB
Advanced
operations
Press ROTATE ( ) on the remote
control.
Each press of the button rotates the image 90
degrees counter-clockwise.
Operate from the menu of the
photo frame
1 Press MENU in single display mode.
The menu is displayed.
2 Press B/b to select the (Editing)
tab.
The screen used for editing is displayed.
3 Press v/V to select [Rotate] and
then press .
The Rotate menu is displayed.
4 Press v/V to select the direction to
rotate and then press .
• :
Rotates the image 90 degrees
clockwise.
• :
Rotates the image 90 degrees counter-
clockwise.
5 Press v/V to select [OK] and then
press .
Note
An enlarged image cannot be rotated.
Tips
• For an internal memory image, image rotation data
will be retained even after the power is turned off.
• You can rotate the image of the index image
display.
Rotating an image
Page: 41
42 GB
Changing the settings of
the auto power on/off
function
The timer function to turn the photo frame on/
off automatically can be set. Main power needs
to be switched ON for this function.
1 Press MENU.
The menu is displayed.
2 Press B/b to select the
(Settings) tab.
The settings screen is displayed.
3 Press v/V to select [Auto power ON/
OFF] and press .
The screen used for setting a value for
[Auto power ON/OFF] is displayed.
4 Press v/V to select [Setup method],
and press . Then press v/V to
select [Simple] or [Advanced], and
press .
[Simple]: Sets the auto power ON/OFF
function finely in one minute increments.
[Advanced]: Sets the auto power ON/OFF
function according to a day of the week by
one hour units.
5 Set the time setting.
[Simple]
1Press v/V to select [Auto power ON/
OFF] and then press .
2Press v/V to select [Enable] and then
press .
3Set the auto on/off timer.
Press v/V to set the time you want.
AM or PM is displayed on the right of
the screen when you select [12 hours]
on the time display setting.
4Set the auto ON/OFF day.
Press v/V to select the day you want to
use this function and then press to
check. Press v/V to select [OK] and
then press .
[Advanced]
1Press B/b/v/V to select the time you
want to use the auto power on/off
function.
You can set this function according to a
day of the week by one hour units.
The color of the selected time zone
changes to blue after you press . The
power supply of the photo frame will be
turned on when the blue time zone time
occurs. The color of the selected time
Page: 42
43 GB
Advanced
operations
zone changes to gray, after you select
the blue time zone and then press .
The power supply of the photo frame is
turned off while it is in the gray time
zone.
Tip
The power is turned off automatically at the
time you set for [Auto power OFF] when
you are using the photo frame.
The power is turned on automatically at the
time you set for [Auto power ON] during the
standby mode.
2Press B/b/v/V to select [OK].
Using the alarm function
You can use the photo frame as an alarm clock.
Set to the alarm switch on the rear panel
to ON.
Under condition of main power switch set to
“On”, the alarm sound and alarm mode screen
will appear at the scheduled alarm time.
To turn off the alarm
Set the alarm switch on the rear panel to OFF.
The alarm is stopped although an alarm screen
continues to be displayed.
The normal screen is displayed after you press
any button on the photo frame other than 1
(on/standby).
Setting the alarm
Continued
Page: 43
44 GB
1 Press MENU.
The menu is displayed.
2 Press B/b to select the
(Settings) tab.
The settings screen is displayed.
3 Press v/V to select [Alarm Setting]
and press .
4 Press v/V to set the time you want.
Tips
• To set the clock, refer to “Setting the current time”
(page 20).
• Auto power on/off will not function during alarm is
set off.
• When alarm sets off at scheduled time, power will
also turn on regardless of auto off settings. Main
power needs to be set at ON for alarm to operate.
Changing the settings
You can change the following settings.
• Slideshow Settings
• Alarm Setting
• Auto power ON/OFF
• Date/time settings
• General Settings (Listing Order, Sony logo
ON/OFF etc,.)
• Language setting
• Initialize
1 Press MENU.
The menu is displayed.
2 Press B/b to select the
(Settings) tab.
The settings screen is displayed.
Setting the time to be alarmed
Setting procedure
Page: 44
45 GB
Advanced
operations
3 Press v/V to select the item you
want to change and then press .
The setting screen of the selected item is
displayed.
For example, when [Slideshow Settings]
is selected.
4 Press v/V to select the item you
want to change and then press .
This enables you to set each of the items
(page 46).
Note
When the photo frame is, for instance,
displaying a slideshow, some settings of some
items cannot be changed. They are displayed in
gray and cannot be selected.
5 Press v/V to select a setting value
and then press .
Each time you press v/V (v/V from the
photo frame), the setting value changes. In
the case of a numerical value, press V to
increase the value and press v to decrease
the value.
If you press , the setting is confirmed.
6 Press MENU.
The menu closes.
To reset to factory default
settings
1 Press MENU and then select (Settings) -
[Initialize] by pressing B/b/v/V.
2 Press v/V to select [Reset] and then press
.
All adjusted values, except for the clock
settings, are reset to the default settings.
Tip
You can also use the MENU button on the photo
frame.
Continued
Page: 45
46 GB
Items to set
*: Factory default settings
Item Setting Description
Slideshow
Settings
Refer to “Enjoying a slideshow” (page 29).
Alarm Setting Sets the specific time for an alarm. (.page 43)
Auto power
ON/OFF
Sets the timer function which turns the power supply of the photo frame on or off,
automatically. You can use this function with the following settings. (.page 42)
Simple Power-ON
timer
You can set the timer (time/day) and input time for the
power to turn on automatically, when you set this
function to enable.
Power-OFF
timer
You can set the timer (time/day) and input time for the
power to turn off automatically, when you set this
function to enable.
Advanced OK Returns to the previous screen after confirming the
operation.
Cancel Returns to the previous screen after cancelling the
operation.
Reset all Deletes all the selected times.
Setup method Advanced* Sets the auto power ON/OFF function according to a
day of the week by one hour units.
Simple Sets the auto power ON/OFF function finely in one
minute increments.
Date/time
settings
Sets the date, time, first day of a week, etc. (.page 20)
General
Settings
Listing Order Sets the display order of images. This setting affects the order in
[Slideshow Settings].
Number Order* Displays images in order of file name.
Shoot. Date Displays images in order of shooting date.
Auto display
orientation
ON*/OFF: You can set the photo frame to automatically detect and rotate
the orientation of images.
LCD backlight Allows you to set the brightness of the backlight of the LCD screen to a
level from 1 to 10*.
Beep ON*/OFF: Sets the beep sound on/off.
Image file size Album* Compresses images and saves them in the internal
memory, that you can save more images. Be aware that
deterioration in image quality compared to the original
images is noticeable when the images are displayed on
a large monitor via a computer.
Original Saves images to the internal memory without
compressing them. There is no deterioration, but you
can save fewer images.
Sony logo ON/
OFF
ON*/OFF: You can set whether the photo frame's Sony logo lights or not.
Page: 46
47 GB
Advanced
operations
System
Information
Version Displays the version of the firmware of the photo frame.
Internal
memory
Memory
capacity
Indicates the maximum amount of space available in
internal memory in the initial state.
Remaining
capacity
Indicates the amount of free space currently available
in internal memory.
Bluetooth
Address
Displays when the Bluetooth adapter is connected to the photo frame.
Language
setting
Sets the display language on the LCD screen.
Japanese, English*, French, Spanish, German, Italian, Russian, Korean, Simplified Chinese,
Traditional Chinese, Dutch, Portuguese, Arabic, Persian, Hungarian, Polish, Czech, Thai,
Greek, Turkish, Malay, Swedish, Norwegian, Danish, Finnish
Note
Default language setting may vary in some regions.
Initialize Format internal
memory
You can format the internal memory.
Notes
• All the images added to the internal memory will be deleted.
• Do not format the internal memory by using a connection to a PC or
other external device.
Reset Returns all settings to their factory defaults except for the current date and
time setting of the [Date/time settings].
*: Factory default settings
Item Setting Description
Page: 47
48 GB
Displaying images on a
USB memory
You can connect a mass-storage-complaint
USB memory device to the photo frame and
display an image directly from the USB
memory.
Notes
• We cannot guarantee connection with all types of
mass storage devices.
• The playback device will be switched to the USB
memory if you connect the USB memory to the
USB A/Bluetooth jack during playback the internal
memory.
1 Connect the photo frame to the AC
power source. (.page 18)
2 Turn the photo frame to ON.
(.page 19)
3 Connect the USB memory to the
USB A/Bluetooth connector.
4 Select the playback device.
(.page 40)
An image on the USB memory is
displayed on the screen.
For details on the slideshow, refer to
page 29. For details on adding images to
the internal memory, refer to page 32.
Notes
• When using a commercially available USB cable,
use an A-Type USB cable that is less than 3 meters
long.
• Do not disconnect the USB memory or turn the
photo frame off while the access lamp on the USB
memory is flashing. Doing so may damage the data
stored on the USB memory. Sony assumes no
responsibility for any damage or loss of data.
• A USB hub or USB device with a built-in USB hub
may not work properly.
• The photo frame cannot use data that has been
encrypted or compressed using, for instance,
fingerprint authentication or a password.
USB memory
Page: 48
49 GB
Using
an
external
device
(with
Bluetooth)
Using an external device (with Bluetooth)
Transferring images
using Bluetooth
You can connect a Bluetooth adaptor (optional)
to the USB A/Bluetooth connector of the photo
frame and transfer images from a Bluetooth
compatible mobile phone or other device. The
transferred images are saved in internal
memory.
Note
You cannot send a file to other Bluetooth compatible
devices from the photo frame.
Compatible profiles for Bluetooth
communication
The DPF-D82/D92 supports the following
profiles:
• BIP (Basic Imaging Profile)
Image Push Responder
• OPP (Object Push Profile)
Object Push Server
For the profiles that your Bluetooth device
supports, please refer to its manual.
What is a “Profile”?
A profile consists of the standards that enable
Bluetooth wireless communication. There are
several profiles available, depending on the
purposes and product to be used. To make
Bluetooth communication possible, the devices
used in the communicated should support the
same profile.
Compatible image file formats that can
be displayed
See page 64.
Maximum number of pixels that can be
handled
See page 64.
1 Connect the photo frame to the AC
power source. (.page 18)
2 Turn the photo frame to ON.
(.page 19)
3 Connect the Bluetooth adaptor
(optional) to the USB A/Bluetooth
connector.
is displayed on the upper portion of
the screen when the guide is displayed.
Note
If any device, other than the Bluetooth adaptor,
such as a memory card, camera, PC, or other
USB memory device or a USB cable is
connected to any of the memory card slots, or
the USB A/Bluetooth connector, disconnect it
from the photo frame and then connect the
Bluetooth adaptor.
4 Check the Bluetooth address of the
photo frame.
You can display the address from [System
Information]. (page 46)
Tip
The address is displayed only when the
Bluetooth adaptor is connected.
5 Transfer an image from the
Bluetooth-compliant mobile phone,
or other device to the photo frame.
The image transferred is saved on the
internal memory.
Note
You cannot transfer an image to the memory
card of a digital photo frame.
Continued
Page: 49
50 GB
To select the photo frame from a
Bluetooth-compliant device, select “Sony
DPF-D92 ##,” “Sony DPF-D82 ##.”
(“##” stands for the two figures from the
right of the address displayed in [System
Information].)
When input of Passkey* is required
Input “0000.” You cannot change the
Passkey with the photo frame.
* A Passkey is often referred to as a “pass
code” or “PIN code.”
Notes
• We cannot guarantee that this product works with
all devices enabled with Bluetooth wireless
technology.
• Do not use the DPPA-BT1 outside the area you
purchased it. Depending on the area, the use of this
product may violate the local radio wave
regulations and may be subject to penalty.
• The communication distance of the product may
vary depending on the obstacles between the
product (a human body, metal objects, or a wall)
and the mobile phone or other device.
• The sensitivity of the Bluetooth communication
may be affected under the following conditions:
– When there is an obstacle between the product
and the mobile phone or other product such as a
human body, metal objects, or a wall.
– Where a wireless LAN is established or a
microwave oven is being used near-by, or other
electromagnetic waves are emitted.
• We cannot guarantee that this product works with
all devices enabled with Bluetooth wireless
technology.
• Sony cannot assume any responsibility for any
information leakage that may be caused by the use
of Bluetooth communications.
• Sony cannot accept responsibilities for any failure
to satisfy the protection requirements resulting from
a non-recommended modification or use of the
product.
For customer support information, please refer to
the operating instructions of the photo frame.
P Caution
• Radio waves from a Bluetooth device may
adversely affect the operation of electrical and
medical devices, and could lead to accidents due to
malfunctions. Make sure to turn off the product and
mobile phone and do not use this product in the
following places:
– Inside hospitals, trains, airplanes, gas stations or
other places where flammable gas may be
present.
– near automatic doors or fire alarms or other
automatically controlled devices.
– near medical equipment.
• Keep this product at least 22 cm away from cardiac
pacemakers. Radio waves from this product may
adversely affect the operation of cardiac
pacemakers.
Bluetooth
compatible mobile
phone

Question & answers

There are no questions about the Sony DPF-D92 yet.

Ask a question about the Sony DPF-D92

Have a question about the Sony DPF-D92 but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Sony DPF-D92. Please make sure that you describe your difficulty with the Sony DPF-D92 as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.