Sony CDP-CE105 manual

View a manual of the Sony CDP-CE105 below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Sony
  • Product: CD-player
  • Model/name: CDP-CE105
  • Filetype: PDF
  • Available languages: Dutch, German, Italian, Portuguese, English, French, Spanish, Swedish

Table of Contents

Page: 0
3-856-161-21 (1)
 1996 by Sony Corporation
CDP-CE105
Operating Instructions
Mode d’emploi
Manual de instrucciones
Bruksanvisning
########
EN
F
ES
S
C
Page: 1
2EN
WARNING
To prevent fire or shock
hazard, do not expose the unit
to rain or moisture.
To avoid electrical shock, do
not open the cabinet. Refer
servicing to qualified
personnel only.
The laser component in this product
is capable of emitting radiation
exceeding the limit for Class 1.
This appliance is classified as a CLASS 1
LASER product. The CLASS 1 LASER
PRODUCT MARKING is located on the
rear exterior.
The following caution label is located
inside of the unit.
For the customers in Canada
CAUTION
TO PREVENT ELECTRIC SHOCK,
DO NOT USE THIS POLARIZED AC
PLUG WITH AN EXTENSION
CORD, RECEPTACLE OR OTHER
OUTLET UNLESS THE BLADES
CAN BE FULLY INSERTED TO
PREVENT BLADE EXPOSURE.
Precautions
On safety
• Caution — The use of optical
instruments with this product will
increase eye hazard.
• Should any solid object or liquid fall
into the cabinet, unplug the player and
have it checked by qualified personnel
before operating it any further.
On power souces
• Before operating the player, check that
the operating voltage of the player is
identical with your local power
supply. The operating voltage is
indicated on the nameplate at the rear
of the player.
• The player is not disconnected from
the Mains as long as it is connected to
the wall outlet, even if the player itself
has been turned off.
• If you are not going to use the player
for a long time, be sure to disconnect
the player from the wall outlet. To
disconnect the mains lead, grasp the
plug itself; never pull the cord.
• Mains lead must be changed only at a
qualified service shop.
On placement
• Place the player in a location with
adequate ventilation to prevent heat
build-up in the player.
• Do not place the player on a soft
surface such as a rug that might block
the ventilation holes on the bottom.
• Do not place the player in a location
near heat sources, or in a place subject
to direct sunlight, excessive dust or
mechanical shock.
On operation
• If the player is brought directly from a
cold to a warm location, or is placed in
a very damp room, moisture may
condense on the lenses inside the
player. Should this occur, the player
may not operate properly. In this case,
remove the disc and leave the player
turned on for about an hour until the
moisture evaporates.
On cleaning
• Clean the cabinet, panel and controls
with a soft cloth slightly moistened
with a mild detergent solution. Do not
use any type of abrasive pad, scouring
powder or solvent such as alcohol or
benzine.
If you have any questions or
problems concerning your player,
please consult your nearest Sony
dealer.
Page: 2
Getting Started
3EN
Getting Started
Unpacking ........................................................................................................ 4
Hooking Up the System ................................................................................. 4
Playing a CD ........................................................................................................ 6
Playing CDs
Using the Display ........................................................................................... 8
Exchanging a Disc While Playing a Disc ..................................................... 8
Locating a Specific Disc ................................................................................. 8
Locating a Specific Track or a Point in a Track .......................................... 9
Playing Tracks Repeatedly (Repeat play) ................................................... 9
Playing in Random Order (Shuffle Play) .................................................... 9
Creating Your Own Programme (Programme Play) ............................... 10
Additional Information
Notes on CDs................................................................................................. 11
Troubleshooting ............................................................................................ 12
Specifications ................................................................................................. 12
Index
Index ............................................................................................................... 13
TABLE OF CONTENTS
Welcome!
Thank you for purchasing the Sony
Compact Disc Player. Before operating
the unit, please read this manual
thoroughly and retain it for future
reference.
About This Manual
The instructions in this manual are for
model CDP-CE105.
Convention
• The following icon is used in this
manual:
Indicates hints and tips for
making the task easier.
EN
Page: 3
Getting Started
4EN
Unpacking
Check that you received the following item:
• Audio cord (1)
Hooking Up the System
Overview
This section describes how to hook up the CD player to
an amplifier. Be sure to turn off the power of each
component before making the connections.
CD player
Line output
(L)
Line output
(R)
Audio input
(L)
Audio input
(R) Amplifier
: Signal flow
What cords will I need?
Audio cord (supplied) (1)
White
(L)
Red
(R)
Red
(R)
White
(L)
To
mains
To mains
Page: 4
Getting Started
Getting Started
5EN
Hookups
When connecting the audio cord, be sure to match the
color-coded cord to the appropriate jacks on the
components: Red (right) to Red and White (left) to
White. Be sure to make connections firmly to avoid
hum and noise.
Amplifier
CD player
INPUT
CD
L
R
LINE OUT
R L
Setting the voltage selector (except for
European, Canadian, and Singaporean
models)
Check that the voltage selector on the rear panel of the
player is set to the local power line voltage. If not, set
the selector to the correct position using a screwdriver
before connecting the mains lead to a wall outlet.
Connecting the mains lead
Connect the mains lead to a wall outlet.
Transporting the player
Before transporting the player, follow the procedure
below to return the internal mechanisms back to their
original position.
1 Remove all the discs from the disc tray.
2 Close the front cover and wait until “no dISC”
appears in the display.
3 Press POWER to turn off the player.
220-240 V
110-120 V
Page: 5
Basic Operations
6EN
1
2
3
• See pages 4 – 5 for the hookup
information.
Playing a CD
DISC 1 DISC 2 DISC 3 DISC 4 DISC 5
CONTNUE SHUFFLE PROGRAM REPEAT DISC SKIP
OPEN
POWER
6
You can select the disc tray
directly
Press one of the DISC 1–5
buttons. The disc tray rotates
and you can place a disc in the
empty disc compartments
(loading position).
4
To place other discs, press DISC SKIP and place the discs in the
order you want to play.
Each time you press the button, the disc tray rotates and you
can place the discs in the empty disc compartments.
The player will play the disc at the loading position.
Turn on the amplifier and select the CD player position so that
you can listen to the sound from this player.
Press POWER to turn on the player.
Press OPEN, and place a disc on the disc tray at the loading
position.
With the label
side up
Disc number
and indicator
Place the disc after the indicator lights up. Loading
position
Disc tray
Playing position
5
3 4
2
Page: 6
Basic
Operations
Basic Operations
7EN
5 Press CONTINUE to select ALL DISCS or 1 DISC Continuous
Play mode.
Each time you press CONTINUE, “ALL DISCS” or “1␣ DISC”
appears in the display.
6 Close the front cover and press ·P to play a disc.
Adjust the volume on the amplifier.
Note
When the front cover is open, if the
play of the current disc ends, the
player stops playing.
If you want to play other discs,
close the front cover and press the
DISC 1-5 button.
You can select the disc you want
to play directly
Press one of the DISC 1–5
buttons with the front cover
closed.
If there is no disc in the disc
number, the disc tray rotates
and plays the next disc.
When you select
ALL DISCS
1␣ DISC
The player plays
All discs in the player consecutively in the order of
disc number
Only one disc at the loading position
To stop playing
Press p.
To
Pause
Resume playing after pause
Go to the next track
Go back to the preceding track
Go to the next disc
Select a disc directly
Remove the CD
OPEN
·P p ≠0/
)±
DISC SKIP
DISC 1 – 5
Press
·P
·P
)±
≠0
DISC SKIP
DISC 1 – 5
OPEN
Page: 7
Playing CDs
8EN
Playing CDs
Exchanging a Disc While
Playing a Disc
You can open the front cover while playing a disc so
that you exchange a disc without interrupting the
playing of the current disc.
Using the Display
You can check information about the disc using the
display.
Checking the total number and playing
time of the tracks
Close the front cover.
The display shows the current disc number, the total
number of tracks and total playing time.
Current disc number Total playing time
Notes on the disc number indications
• The double-circle around a disc number indicates the disc is
ready to be played.
• When a disc compartment is recognized as empty, the disc
number disappears.
Display information while playing a disc
While playing a disc, the display shows the current
disc number, track number, and playing time of the
track.
1 2 3 4 5
1 10 46 28
ALL DISCS
DISC TRACK MIN SEC
Total number of tracks
Current disc number Playing time
Current track number
1 2 3 4 5
1 1 1 56
ALL DISCS
DISC TRACK MIN SEC
The information also appears when you press DISC
SKIP in the stop mode.
DISC SKIP
1 Press OPEN and exchange the disc at the loading
position.
2 Close the front cover.
If you select the Continuous Play and ALL DISCS,
the exchanged disc number starts flashing.
The play of the current disc ends, and the disc
whose disc number is flashing starts playing.
Note
While the disc number is flashing, if you press any buttons,
the flashing stops and the player returns to the mode before
the disc was exchanged.
Locating a Specific Disc
You can locate any disc before or while playing a disc.
DISC 1 – 5
To locate
The next disc
A specific disc directly
Press
DISC SKIP while playing a disc
DISC 1 – 5
DISC SKIP
OPEN
Page: 8
Playing CDs
Playing CDs
9EN
Locating a Specific Track or a
Point in a Track
You can quickly locate any track while playing a disc
using the ≠0/)± (AMS: Automatic Music
Sensor) buttons. You can also locate a specific point in
a track while playing a disc.
To locate
The next or
succeeding tracks
The current or
preceding tracks
A point while
monitoring the sound
A point quickly by
observing the display
during pause
Press
)± repeatedly until you find the
track
≠0 repeatedly until you find the
track
)± (forward) or ≠0
(backward) and hold down until you
find the point
)± (forward) or ≠0
(backward) and hold down until you
find the point. You will not hear the
sound during the operation.
Note
If “ ” appears in the display, the disc has reached the end
while you were pressing and holding )±. Press ≠0
to go back.
Playing Tracks Repeatedly
(Repeat Play)
You can play discs/tracks repeatedly in any play
mode.
When the disc is played in
Continuous Play
(ALL DISCS) (page 7)
Continuous Play
(1␣ DISC) (page 7)
Shuffle Play
(ALL DISCS) (page 9)
Shuffle Play
(1␣ DISC) (page 10)
Programme Play (page 10)
To cancel Repeat Play
Press REPEAT repeatedly until “REPEAT” disappears from
the display.
Repeating the current track
You can repeat the current track.
While the track you want is being played, press
REPEAT repeatedly until “REPEAT 1” appears in the
display.
Playing in Random Order
(Shuffle Play)
You can have the player “shuffle” tracks and play in
random order. The player shuffles all the tracks on all
discs or on the disc you’ve specified.
The player repeats
All the tracks on all discs
All the tracks on the current
disc
All the tracks on all discs in
random order
All the tracks on the current
disc in random order
The same programme
DISC 1 – 5
SHUFFLE
·P
Shuffle Play on all discs
You can play all tracks on all discs in random order.
1 Press SHUFFLE repeatedly until “ALL DISCS”
appears in the display.
2 Press ·P to start ALL DISCS Shuffle Play.
The indication appears while the player is
“shuffling” the tracks.
To cancel Shuffle Play
Press CONTINUE.
Press REPEAT while playing a disc.
“REPEAT” appears in the display. The player repeats
the discs/tracks as follows:
REPEAT
≠0/)±
Page: 9
Playing CDs
10EN
You can start Shuffle Play while playing
Press SHUFFLE, and Shuffle Play starts from the current
track.
You can specify discs during Shuffle Play (Select
Shuffle Play)
You can specify discs during ALL DISCS Shuffle Play
mode, and the tracks on the specified discs are played in
random order.
Circles appear only arround the specified disc numbers
in the display. To cancel the selected discs, press
DISC 1 – 5 again. The circles disappear.
To return to ALL DISCS Shuffle Play, press SHUFFLE
twice.
Shuffle Play on one disc
You can play all tracks on a specific disc in random
order.
1 Press SHUFFLE repeatedly until “1␣ DISC” appears
in the display.
2 Press DISC 1 – 5 to start 1␣ DISC Shuffle Play on
the selected disc.
The indication appears while the player is
“shuffling” the tracks.
To cancel Shuffle Play
Press CONTINUE.
You can start Shuffle Play while playing
Press SHUFFLE, and Shuffle Play starts from the current
track.
Creating Your Own Programme
(Programme Play)
You can arrange the order of the tracks on the discs
and create your own programme. The programme can
contain up to 32 steps.
PROGRAM DISC 1 – 5
p
·P
1 Press PROGRAM.
“PROGRAM” appears in the display.
If a programme is already stored, the last step of
the programme appears in the display. When you
want to erase the whole programme, hold down p
until “ALL CLr” appears for about 2 seconds in the
display(see page 11).
2 Press DISC 1 – 5 to select the disc.
“AL” in the display stands for “all” tracks.
When you want to programme the whole disc as
one step, skip Step 3 and 4 and go to Step 5.
3 Press )± or ≠0 to choose a track.
The chosen track number and the total playing
time flashes in the display.
1 2 3 4 5
1 AL 42 11
PROGRAM
DISC TRACK MIN SEC
Total playing time
1 2 3 4 5
1 5 13 18
PROGRAM
DISC TRACK MIN SEC
4 Press PROGRAM.
“PROGRAM”, track number and play order
indications appear for a about 3 seconds in the
display and then goes back to the Step 3 display.
1 2 3 4 5
1 5 3
PROGRAM
DISC TRACK STEP
Last programmed track Playing order
Page: 10
Playing CDs
Playing CDs
11EN
5 To programme other discs or tracks, do the
following:
To programme
Other discs
Other tracks on the same disc
Other tracks on other discs
6 Press ·P to start Programme Play.
To cancel Programme Play
Press CONTINUE.
You can create your programme while checking the
disc labels
When the front cover is open, follow Steps 1 to 6 while
pressing DISC SKIP to check the disc labels.
Note that, if the programmed track number isn’t found
on the disc, that step is automatically erased.
The programme remains even after Programme Play
ends
When you press ·P, you can play the same
programme again.
The programme remains until you erase it or turn off
the player
If you exchange discs, the programmed disc and track
numbers remain. So, the player plays only the existing
disc and track numbers. However, the disc and track
numbers that aren’t found in the player or on the disc are
deleted from the programme, and the rest of the
programme is played in the programmed order.
Note
The total playing time doesn’t appear when:
—You have programmed a track whose number exceeds 20.
—The total playing time of the programme exceeds 200
minutes.
—Front cover is opened.
Changing the track order
You can change your programme before you start
playing.
To
Erase the last step in the
programme
Change the whole
programme completely
Playing CDs
Notes on CDs
On handling CDs
• To keep the disc clean, handle the disc by its edge. Do not
touch the surface.
• Do not stick paper or tape on the disc.
Additional Information
Repeat Step(s)
2
3 and 4
2, 3 and 4
Press
p. Each time you press the
button, the last step will be
cleared.
p until “ALL CLr” appears
in the display. Create a new
programme following the
programming procedure.
• Do not expose the disc to direct sunlight or heat sources
such as hot air ducts, nor leave it in a car parked in direct
sunlight as there can be considerable rise in temperature
inside the car.
• Do not use any commercially available stabilizer. If you do,
the disc and the player may be damaged.
• After playing, store the disc in its case.
On cleaning
• Before playing, clean the disc with a cleaning cloth. Wipe
the disc from the centre out.
Not this way
• Do not use solvents such as benzine, thinner, commercially
available cleaners or anti-static spray intended for vinyl
LPs.
Page: 11
Playing CDs
12EN
Where purchased␣
Europe and Singapore
Canada
Other countries
Additional Information
Specifications
Compact disc player
Laser Semiconductor laser (λ = 780 nm)
Emission duration: continuous
Laser output Max 44.6 µW*
* This output is the value measured at
a distance of 200 mm from the
objective lens surface on the Optical
Pick-up block with 7 mm aperture.
Frequency response 2 Hz to 20 kHz ± 1.0 dB
Signal-to-noise ratio More than 100dB
Dynamic range More than 96dB
Harmonic distortion Less than 0.01%
Channel separation More than 86dB
LINE OUT
Jack
type
Phono
jacks
Load
impedance
Over 10 kilohms
Power requirements
220 V – 230 V AC, 50/60 Hz
120 V AC, 60 Hz
110 V – 120 V or 220 V – 240 V AC,
adjustable, 50/60 Hz
Output
Maximum
output
level
2 V
(at 50 kilohms)
General
Power requirements
Troubleshooting
If you experience any of the following difficulties while
using the player, use this troubleshooting guide to help
you remedy the problem. Should any problem persist,
consult your nearest Sony dealer.
There’s no sound.
/Check that the player is connected securely.
/Make sure you operate the amplifier correctly.
The CD does not play.
/There’s no CD inside the player (“no dISC”
appears). Insert a CD.
/Place the CD with the label side up on the disc
tray correctly.
/Clean the CD (page 11).
/Moisture has condensed inside the player.
Remove the disc and leave the player turned on
for about an hour (page 2).
The player functions incorrectly.
/The microcomputer chips may be operating
incorrectly. Turn the power off, then turn it
back on to reset the player.
Power consumption 10 W
Dimensions (approx.) 430 × 135 × 400 mm
(w/h/d) (17 × 5 3/8 × 15 3/4 in.) incl. projecting
parts
Mass (approx.) 4.5 kg (9 lbs 15 oz)
Supplied accessories
Audio cord (2 phono plugs – 2 phono plugs) (1)
Design and specifications are subject to change without notice.
Page: 12
13EN
Index
A, B
AMS 9
Automatic Music Sensor. See
AMS
C, D, E, F, G
Connecting 4
Continuous Play 7
Exchanging a disc while
playing a disc 8
H, I, J, K
Handling CDs 11
Hookups 4
overview 4
L, M, N, O
Locating
by monitoring 9
by observing the display 9
using AMS 9
P, Q
Playing
Continuous Play 7
Programme Play 10
Repeat Play 9
Shuffle Play 9
Programme 10
changing 11
R
Repeating 9
S
Searching. See Locating
Select Shuffle Play 10
Shuffle Play 9
T
Total playing time 8
Troubleshooting 12
U, V, W, X, Y, Z
Unpacking 4
Voltage selector 5
Index
Names of controls
Buttons
CONTINUE 7
DISC 1 – 5 6
DISC SKIP 6
OPEN 6
PROGRAM 10
REPEAT 9
SHUFFLE 9
·P 7
p 7
≠0/)± 7, 9
Switch
POWER 6
Others
Disc compartment 6
Disc tray 6
Display 8
Loading position 6
Playing position 6
Page: 49
Sony Corporation Printed in Indonesia

Question & answers

There are no questions about the Sony CDP-CE105 yet.

Ask a question about the Sony CDP-CE105

Have a question about the Sony CDP-CE105 but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Sony CDP-CE105. Please make sure that you describe your difficulty with the Sony CDP-CE105 as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.