Sanitas SFT 75 manual

User manual for the Sanitas SFT 75 in English. This PDF manual has 40 pages.

Page: 1
G? Multi functional thermometer ; W Instructions for use   .................................2 KW Θερμόμετρο πολλαπλών λειτουργιών Οδηγίες χρήσης  ....................................12 I; Termometro multifunzione Istruzioni per l’uso.................................24 Electromagnetic Compatibility Information  .........................................................34 SFT 75 G Tel.: 0800 931 0319 W Tel.: 0800 773 70 ? Tel.: 1800 939 235 K Τηλ.: 211 198 4679 ; Tel.: 800 626 05 I Tel.: 800 141 010 Service-Hotline:
Page: 2
2 Included in delivery Check that the delivery has not been tampered with and make sure that all components are present. Before use, ensure that there is no visible damage to the device or accessories and that all packaging material has been removed. If you have any doubts, do not use the device and contact your retailer or the specified Customer Services address. 1 x multi functional thermometer 2 x 1.5 V AAA batteries, LR03 1 x forehead/cover cap 1 x set of instructions for use 1. Signs and symbols   The following symbols appear in these instructions for use and on the device: WARNING Warning notice indicating a risk of injury or damage to health. IMPORTANT Safety note indicating possible damage to the unit/acces- sory. Note Note on important information. Observe the instructions for use G ? ; W ENGLISH Table of contents 1. Signs and symbols   .........................................................................2 2. Intended use   ...................................................................................3 3. Notes   ...............................................................................................3 4. Unit description .............................................................................4 5. Display description   ........................................................................5 6. Initial use   .........................................................................................5 7. Basic settings   .................................................................................5 8.  What you should know about using this thermometer   ...............6 9. Measuring   .......................................................................................6 9.1 Measuring body temperature on the forehead   ...........................7 9.2 Measuring body temperature in the ear   .....................................7 9.3 Measuring object temperatures   .................................................8 9.4 Displaying stored measurements   ...............................................8 10. Replacing the battery   ....................................................................9 11. Cleaning and storage ....................................................................9 12. Disposal  ..........................................................................................9 13. What if there are error messages?   .............................................10 14. Technical data   ..............................................................................10 15. Warranty/  Service centre..............................................................11 Read these instructions for use carefully and keep them for later use, be sure to make them accessible to other users and observe the information they contain.
Page: 3
3 Application part, type BF Disposal in accordance with the Waste Electrical and Electronic Equipment EC Directive – WEEE The CE labelling certifies that the product complies with the essential requirements of Directive 93/42/EEC on medical products. Manufacturer IP 22 Protected against solid foreign objects 12.5 mm in diameter and larger, and against drops of water when the housing is angled up to 15° Storage Permissible storage temperature and humidity Operating Permissible operating temperature and humidity SN Serial number 2. Intended use   This multi functional thermometer is intended solely for measuring forehead temperature, ear temperature and object temperature. It al- lows you to quickly and easily measure body temperature and object temperature. Values are saved automatically. The multi functional ther- mometer is suitable for domestic use. Use the device for the intended purpose only and in the manner spe- cified in these instructions for use. Any form of improper use can be dangerous. The manufacturer is not liable for damage resulting from improper or careless use. This device complies with EU Directive 93/42/EEC concerning medical devices, the Medizinproduktegesetz (German Medical Devices Act), the ASTM (American Society for Testing and Materials) E 1965 - 98 and the European Standard EN 12470-5: Clinical thermometers – Part 5: Performance for infrared ear thermometers (with maximum device) and the European Standard EN60601-1-2, and is subject to particular precautions with regard to electromagnetic compatibility. Please note that portable and mobile HF communication systems may interfere with this unit. More details can be requested from the stated Customer Services address or found at the end of the instructions for use. 3. Notes   Safety notes WARNING • To measure temperature, insert the sensor tip of the thermometer carefully into the ear. • Use of the thermometer on different persons can be inappropriate in the event of certain acute infectious diseases because of the pos- sible spread of germs despite cleaning and disinfection. If you have any doubts, please consult your doctor. • Keep the device away from children. Choking hazard! Children may swallow the packaging material or the forehead/cover cap. • Children must not be allowed to use the device. Medical products are not toys. • Check before each use that the lens is intact. If it is damaged, contact your retailer or the service address. • The device has been designed for practical use, but is not a substitute for a visit to the doctor.
Page: 4
4 Notes on handling batteries • If your skin or eyes come into contact with battery fluid, rinse the af- fected areas with water and seek medical assistance. • Choking hazard! Small children may swallow and choke on bat- teries. Store the batteries out of the reach of small children. • Observe the plus (+) and minus (-) polarity signs. • If a battery has leaked, put on protective gloves and clean the battery compartment with a dry cloth. • Protect batteries from excessive heat. • Risk of explosion! Never throw batteries into a fire. • Do not charge or short-circuit batteries. • If the device is not to be used for a relatively long period, take the batteries out of the battery compartment. • Use identical or equivalent battery types only. • Always replace all batteries at the same time. • Do not use rechargeable batteries. • Do not disassemble, split or crush the batteries. General notes • Repairs must only be carried out by authorised service centres, other- wise the guarantee is invalidated. • This thermometer is a sensitive electronic device. Handle it with care and do not subject it to any mechanical impacts. • Do not expose the device to direct sunlight. • The thermometer is NOT waterproof. For this reason, direct contact with water or other liquids must be avoided. • The SFT 75 multi functional thermometer is only designed for the measuring area stated in the instructions for use. • After each use, clean the measuring tip with a soft cloth moistened with disinfectant. • Before making a claim, please check the batteries first and replace them if necessary. • Repairs must only be carried out by authorised service centres; oth- erwise, the guarantee is invalidated. • If you still have any questions, please contact your retailer. 4. Unit description ON/MEAS button (ear and object measurement) Display Battery compartment lid Forehead/cover cap Measure button (forehead measurement) M button (memory) S button
Page: 5
5 5. Display description   1 Date display 4 5 3 6 7 8 9 10 11 2 1 2 Time display 3 Measurement in progress 4 Measuring unit Celsius/Fahrenheit 5 Object temperature mode 6 Temperature value 7 Button tone symbol 8 Battery level 9 Memory space number display 10 Forehead temperature mode 11 Ear temperature mode 6. Initial use   The batteries are already inserted in new devices. Before first use, re- move the protruding plastic insulating strip from the battery compart- ment. The multi functional thermometer will then switch on automatically. 7. Basic settings   You can adjust the following basic settings on the multi functional ther- mometer: Temperature unit (Celsius/Fahrenheit), date and time. 1. Press the ON/MEAS button to switch on the device. 2. Hold down the S button for five seconds. 3. The current temperature unit setting flashes on the display. Use the S button to select the temperature unit (°C or °F). Use the M button to confirm. 4. The year display flashes on the display. Use the S button to select the current year. Use the M button to confirm. 5. The month display flashes on the display. Use the S button to select the current month. Use the M button to confirm. 6. The day display flashes on the display. Use the S button to select the current day. Use the M button to confirm. 7. The hour display flashes in the display. Use the S button to select the current hour. Use the M button to confirm. 8. The minute display flashes in the display. Use the S button to select the current minute. Use the M button to confirm. 9. The device stores the basic settings and automatically switches off. Activating/deactivating the button tone You can activate/deactivate a button tone on the device. When the button tone is activated, a beep sounds every time a button is pressed and after every measurement. To activate the button tone, ensure that the device is switched on and then briefly press the S button. The loudspeaker symbol appears on the display. To deactivate the button tone again, press the S button once more. The loudspeaker symbol disappears from the display.
Page: 6
6 8.  What you should know about using this thermometer   There are different thermometers for taking temperature measurements in different parts of the body: • Ear/forehead thermometer (this thermometer, for measuring in the ear or on the forehead area) • Rod thermometer (for rectal [in the back passage], axillary [under the arm] or oral measurement [in the mouth]) Note Taking the temperature gives a measurement that provides information about a person’s current body temperature. If you are uncertain about interpreting the results or if the value is abnormal, please consult your doctor. This also applies in the case of slight temperature changes if there are other symptoms of illness such as agitation, severe sweating, flushed skin, fast pulse rate, tendency to collapse etc. Temperatures measured with different thermometers cannot be com- pared with one another. You should therefore tell your doctor (or bear in mind if you are diag- nosing yourself) what thermometer you used to take your temperature and in what part of the body. The temperature of a healthy person is affected by various factors: the person’s individual metabolism, their age (body temperature is higher in babies and toddlers and decreases with age. Greater temperature fluctuations occur faster and more often in children, e.g. due to growth spurts), their clothing, the ambient temperature, the time of day (body temperature is lower in the morning and increases throughout the day towards evening), the preceding physical and, to a lesser extent, mental activity. The temperature varies depending on the part of the body where the measurement is taken. The difference can be between 0.2°C (0.4°F) and 1°C (1.8°F) for a healthy person. The normal temperature ranges are as follows: • On the forehead: 35.8°C (96.4°F) to 37.6°C (99.7°F), measured with a forehead thermometer • In the ear: 36.0°C (96.8°F) to 37.8°C (100°F), measured with an ear thermometer • In the back passage: 36.3°C (97.3°F) to 37.8°C (100°F), measured with a conventional thermometer • In the mouth: 36.0°C (96.8°F) to 37.4°C (99.3°F), measured with a conventional thermometer In order to track temperature change, always take the measurements in the same part of the body. 9. Measuring   Note Check before each use that the lens is intact. If it is damaged, contact your retailer or the service address. Bear in mind that the multi functional thermometer needs to have been in the room in which the measurement is taken for at least 30 minutes before use. Before each measurement, make sure that the device is in the approp- riate mode for the measurement that you wish to take. Mode Ear Forehead Object ­Button ­tone ­activated Display
Page: 7
7 9.1 Measuring body temperature on the forehead   Note Please note that the forehead/temples must be free from sweat and cosmetics and that taking vasoconstrictive medication and skin irritations can distort the result when measuring temperature on the forehead. 1. Hold down the ON/MEAS button for one second to switch on the multi functional thermometer. 2. Place the measuring head with the forehead/cover cap fitted on the temple. 3.  Keep the side measure button pressed and move the multi functional thermometer smoothly over the forehead to the other temple. 4. Then release the measure button . The measured value appears on the display and the end of the measuring is signalled by a short beep (if button tone is activated). 5. If the measured value is within the normal range (<38°C/100.4°F), the green LED lights up for 3 se- conds. If the measured value is higher (≥ 38°C/100.4°F, high temperature), the red LED is illuminated. 6. The device switches off automatically after 60 se- conds. 7. Clean the device after every use as described in the “Cleaning and storage” chapter. 9.2 Measuring body temperature in the ear   WARNING • Some people produce different readings in their left and right ear. In order to record temperature changes, always measure a person’s temperature in the same ear. • The built-in ear thermometer may be used by children only under adult supervision. Measurement is usually possible over the age of 6 months. In infants under 6 months, the ear canal is still very narrow so the temperature frequently cannot be recorded and the measurements displayed are often too low. • The measurement must not be taken in an ear affected by inflammatory diseases (e.g. discharging pus or secretion), after possible ear injuries (e.g. eardrum damage) or in the healing period after operative proce- dures. In all of these cases, please consult your doctor. • Use of the multi functional thermometer on different persons can be inappropriate in the event of certain acute infectious diseases because of the possible spread of germs despite cleaning and disinfection. If you have any doubts, please consult your doctor. • If you have been lying on one ear for some time, the temperature is slightly raised. Wait a little while or measure in the other ear. • As ear wax can affect the measurement, you should clean the ear before measuring if necessary. 1. Hold down the ON/MEAS button for one second to switch on the multi functional thermometer. 2. Remove the forehead/cover cap by gently turning it to the right (1) and then pulling it off forwards (2).
Page: 8
8 3. Make sure that the sensor tip and al- so the ear canal are clean. As the ear canal is slightly curved, you have to pull the ear slightly up and backwards before inserting the sensor tip. This is important so that the sensor tip can be pointed directly at the eardrum. Positioning on small children On infants under 1 year of age: • Lay down the infant such that one ear is pointing upwards. • Pull the ear gently backwards before you carefully insert the sensor tip into the ear. In small children older than 1: • Stand slightly to the side behind the child. • Pull the ear gently up and backwards before you carefully insert the sensor tip into the ear. 4. Insert the sensor tip carefully and hold down the ON/MEAS button for one second. 5. The measured value appears on the display and the end of the measuring is signalled by a short beep (if button tone is activated). 6. If the measured value is within the normal range (<38°C/100.4°F), the green LED lights up. If the mea- sured value is higher (≥ 38°C/100.4°F, high tempera- ture), the red LED is illuminated. 7. The device switches off automatically after 60 seconds. 8. Clean the device after every use as described in the “Cleaning and storage” chapter. 9.3 Measuring object temperatures   1. Hold down the ON/MEAS button for one second to switch on the multi functional thermometer. 2. Then hold down the M button and the S button simultaneously for 3 seconds to switch to object temperature mode. appears on the LCD display. 3. Hold down the ON/MEAS-= button and point the sensor tip towards the object or liquid to be measured (never immerse in liq- uids), maintaining a distance of 3 cm. 4. Release the ON/MEAS button . The measured value appears on the display and the end of the measuring is signalled by a short beep (if button tone is activated). 5. To exit object temperature mode, hold down the M button and the S button simultaneously again for 3 seconds. 6. The device switches off automatically after 60 seconds. 7. Please note that the displayed temperature is the measured and not the adapted surface temperature. It is not the same as the fore- head/ear temperature. 9.4 Displaying stored measurements   The device automatically stores the values from the last 30 measure- ments. When 30 memory spaces are exceeded, the oldest value is deleted. The stored values can be called up as follows: 1. Hold down the ON/MEAS button for one second to switch on the multi functional thermometer. 2. Press the M button. The most recent measurement appears on the display. 3. To switch between the individual stored measurements, press the M button. 4. The device switches off automatically after 60 seconds. 2-3 cm
Page: 9
9 10. Replacing the battery   Before replacing the battery, ensure that the device is switched off. When the batteries get weak, the battery warning symbol appears on the display . It is still possible to measure temperature. However, the batteries must be replaced as soon as possible. If the battery warning symbol and are flashing on the display, the batteries must be replaced immedia- tely. If the batteries are too flat, then the thermometer will switch off automatically. To change the batteries, follow the instructions below: 1. Use a screwdriver to turn the screw on the battery compartment lid. 2. Remove the battery compartment lid. 3. Take the flat batteries out of the battery compartment. 4. Insert the new batteries into the battery compartment until you hear and feel them slot into place. Ensure when inserting the batteries that the correct polarity (+/-) is observed. 5. Place the battery compartment lid back on. 6. Use a screwdriver to re-tighten the screw on the battery com- partment lid. 11. Cleaning and storage • Clean the sensor tip and the fore- head/cover cap after each use. Use a clean cloth or cotton bud that can be moistened with disinfectant, alcohol or warm water. • To clean the entire device, use a soft cloth slightly moistened with a mild soapy solution. • Do not use any harsh cleaning products. • Always store the thermometer with the forehead/cover cap on. • If prolonged storage is intended, you should remove the batteries. • The device must not be stored or used at an excessively high or low temperature or humidity (see technical data), in sunlight, in as- sociation with an electrical current or in dusty locations. Otherwise inaccuracies can occur. 12. Disposal   The empty, completely flat batteries must be disposed of through spe- cially designated collection boxes, recycling points or electronics retai- lers. You are legally required to dispose of the batteries. The codes below are printed on batteries containing harmful substances: Pb = Battery contains lead, Cd = Battery contains cadmium, Hg = Battery contains mercury. For environmental reasons, do not dispose of the device in the household waste at the end of its useful life. Dispose of the unit at a suitable local collection or recycling point. Dispose of the device in accordance with EC Directive – WEEE (Waste Electrical and Electronic Equipment). If you have any questions, please contact the local authorities responsible for waste disposal.
Page: 10
10 13. What if there are error messages?   Error message Cause Solution The recorded tempe- rature is higher than 1)  Ear/forehead ther- mometer mode: 43°C (109.4°F) 2)  Object tempera- ture mode: 100°C (212°F) Operate the thermometer only between the speci- fied temperature ranges. If necessary, clean the sensor tip. In the event of a repeated error mes- sage, contact your retai- ler or Customer Services. The recorded tempe- rature is lower than 1)  Ear/forehead ther- mometer mode: 34°C (93.2°F) 2)  Object temperature mode: 0°C (32°F). The operating tem- perature is not in the range from 15°C to 35°C (59°F to 95°F). Operate the multi func- tional thermometer only between the specified temperature ranges. If you cannot find a solution to your problem here, contact our Custo- mer Services. 14. Technical data   Name and model SFT 75 Measurement range Ear/forehead thermometer mode: 34°C – 43°C (93.2°F – 109.4°F) Object temperature mode: 0°C – 100°C (32°F – 212°F) Laboratory measu- rement accuracy Ear thermometer mode: ±0.2°C (±0.4°F) from 35°C to 42°C (95°F to 107.6°F), outside of this measurement range ±0.3°C (±0.5°F) Forehead thermometer mode: ±0.2°C (±0.4°F) from 35°C to 42°C (95°F to 107.6°F), outside of this measurement range ±0.3°C (±0.5°F) Object temperature mode: ±1.5°C (±2.7°F) at <30°C (86°F); ±5% (in 3 cm) at ≥30°C (86°F) Interval between 2 measurements At least 5 seconds Clinical repeat pre- cision Ear:  Children, 1 – 5 years: ±0.08°C (±0.14°F) Adults: ±0.07°C (±0.13°F) Forehead:  Children, 1 – 5 years: ±0.07°C (±0.13°F) Adults: ±0.08°C (±0.14°F) Measurement units °Celsius (°C) or °Fahrenheit (°F) Operating con- ditions 15°C to 35°C (59°F to 95°F) with a relative hu- midity of up to 85% (non-condensing) Storage conditions -25°C to 55°C (-13°F to 131°F) with a relative humidity of up to 85% (non-condensing) Dimensions 132 x 37 x 40 mm
Page: 11
11 Weight 61 g (without batteries) Battery 2 x 1.5V AAA (LR03) Memory For 30 measurements The serial number is located on the device or in the battery compartment. 15. Warranty/  Service centre We offer a 3-year product warranty from the date of purchase against material and production faults. The warranty does not cover: • Damage due to improper operation • Wearing parts • Cases of personal negligence on the part of the customer • The event that the device has been opened by an unauthorised work- shop. The warranty does not affect the customer’s statutory rights. To assert a warranty claim within the warranty period, the customer must pro- vide proof of purchase. The warranty claim must be submitted within a period of 3 years from the date of purchase to Hans Dinslage GmbH, Uttenweiler, Germany. In case of complaints, please contact our service department using the following contact details: Service hotline (free): E-mail: G Tel.: 0800 931 0319 service-uk@sanitas-online.de ? Tel.: 1800 939 235 service-ie@sanitas-online.de W Tel.: 0800 773 70 service-cy@sanitas-online.de ; Tel.: 800 626 05 service-mt@sanitas-online.de If requested, please send the faulty product to the following address: NU Service GmbH Lessingstraße 10 b 89231 Neu-Ulm Germany Subject to errors and changes
Page: 12
34 ELECTROMAGNETIC COMPATIBILITY INFORMATION Table 1 Guidance and manufacturer’s declaration-electromagnetic emissions The SFT75 Multi-function Thermometer is intended for use in the electromagnetic environment specified below. The customer or the user of the SFT75 Multi-function Thermometer should assure that it is used in such an environment. Emissions test Compliance Electromagnetic environment – guidance RF emissions CISPR 11 Group 1 The SFT75 Multi-function Thermometer uses RF energy only for its internal func- tion. Therefore, its RF emissions are very low and are not likely to cause any interference in nearby electronic equipment. RF emissions CISPR 11 Class B The SFT75 Multi-function Thermometer is suitable for use in all establishments other that domestic and those directly connected to the public low-voltage power supply network that supplies buildings used for domestic purposes. Harmonic emissions IEC 61000-3-2 Not ­applicable Voltage fluctuations/flicker emissions IEC 61000-3-3 Not ­applicable
Page: 13
35 Guidance and manufacturer’s declaration – electromagnetic immunity The SFT75 Multi-function Thermometer is intended for use in the electromagnetic environment specified below. The customer or the user of the SFT75 Multi-function Thermometer should assure that it is used in such an environment. IMMUNITY test IEC 60601 test level Compliance level Electromagnetic environment – guidance Electrostatic discharge (ESD) IEC 61000-4-2 ±6 kV contact ±8 kV air ±6 kV contact ±8 kV air Floor should be wood, concrete or ceramic tile. If floors are covered with shythetic material, the relative humidity should be at least 30%. Electrical fast transient/burst IEC 61000-4-4 ±2 kV for power supply lines ±1 kV air for input/out- put lines Not applicable Mains power quality should be that of a typical commercial or hospital environment. Surge IEC 61000-4-5 ±1kV differential mode ±2kV common mode Not applicable Mains power quality should be that of a typical commercial or hospital environment. Voltage dips, short interrup- tions and voltage variations on power supply input lines IEC 61000-4-11 <5% UT (>95% dip in UT for 0.5 cycle 40% UT (60% dip in UT for 5 cycles 70% UT (30% dip in UT for 25 cycles 5% UT (>95% dip in UT for 5 sec Not applicable Mains power quality should be that of a typical commercial or hospital environment. If the use of the SFT75 Multi-func- tion Thermometer requires continued operation during power mains interruptions, it is recommended that the SFT75 Multi- function Thermometer be powered from an uninterruptible power supply or a battery. Power frequency (50/60 Hz) magnetic field IEC 61000-4-8 3 A/m 3 A/m Power frequency magnetic fields should be at levels characte- ristic of a typical location in a typical commercial or hospital environment. NOTE: UT is the a.c. mains voltage prior to application of the test level. Table 2
Page: 14
36 Table 3 Guidance and manufacturer’s declaration – electromagnetic immunity The SFT75 Multi-function Thermometer is intended for use in the electromagnetic environment specified below. The customer or the user of the SFT75 Multi-function Thermometer should assure that it is used in such an environment. IMMUNITY test IEC 60601 test level ­Compliance level Electromagnetic environment – guidance Conducted RF IEC 61000-4-6 Radiated RF IEC 61000-4-3 3Vrms 150 kHz to 80 MHz 3  V/m 80 MHz to 2.5 GHz 3Vrms 3  V/m Portable and mobile RF communications equipment should be used no closer to any part of the SFT75 Multi-function Thermometer, including cables, than the recommended separation distance calculated from the equation applicable to the frequency of the transmitter. Recommended separation distance: d = 1.2 d = 1.2 80 MHz to 800 MHz d = 2.3 800 MHz to 2.5 GHz Where P is the maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer and d is the recommended separation distance in meters (m). Field strengths from fixed RF transmitters, as determined by an electromagnetic site survey,a should be less than the compliance level in each frequency range.b Interference may occur in the vicinity of equipment marked with the following symbol: NOTE 1 At 80 MHz and 800 MHz, the higher frequency range applies. NOTE 2  These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from struc- tures, objects and people. Field strengths from fixed transmitters, such as base stations from radio (cellular/cordless) telephones and land mobile radios, amateur radio, AM and FM radio broadcast and TV broadcast can not be predicted theoretic call with accuracy. To assess the electromagnetic envi- ronment due to fixed RF transmitters, an electromagnetic site survey should be considered. If the measured field strength in the location in which the SFT75 Multi-function Thermometer is used exceeds the applicable RF compliance level above, the SFT75 Multi-function Thermo- meter should be observed to verify normal operation. If abnormal performance is observed, additional measures may be necessary, such as reorienting or relocating the SFT75 Multi-function Thermometer. Over the frequency range 150kHz to 80MHz, field strengths should be less than [V1] V/m.
Page: 15
37 Table 4 Recommended separation distances between portable and mobile RF communications equipment and the EQUIPMENT or ­ SYSTEM-for EQUIPMENT and SYSTEMS that are not LIFE-SUPPORTING Recommended separation distances between portable and mobile RF communications equipment and the SFT75 Multi-function Thermometer The SFT75 Multi-function Thermometer is intended for use in an electromagnetic environment in which radiated RF distances are controlled. The customer or the user of the SFT75 Multi-function Thermometer can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile RF communications equipment (transmitters) and the SFT75 Multi-function Thermometer as recom- mended below according to the maximum output power of the communications equipment. Rated maximum output power of transmitter (W) Separation distance according to frequency of transmitter (m) 150 kHz to 80 MHz d = 1.2 80 MHz to 800 MHz d = 1.2 800 MHz to 2.5 GHz d = 2.3 0.01 0.12 0.12 0.23 0.1 0.38 0.38 0.73 1 1.2 1.2 2.3 10 3.8 3.8 7.3 100 12 12 23 For transmitters rated at a maximum output power not listed above, the recommended separation distanced in meters (m) can be estimated using the equation applicable to the frequency of the transmitter, where P is the maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer. NOTE 1  At 8- MHz and 800 MHz, the separation distance for the higher frequency range applies. NOTE 2  These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from struc- tures, objects and people.

Question & answers

Hi, Where can l find and download the instructions for multifunction thermometer SFT 75 in english? Thank you Judy

J. Kern, 2020-05-02 11:35:38

Can i reset it? Shows the same temperature for everyone

Marios, 2020-03-21 16:42:43

Have a question about the Sanitas SFT 75 but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Sanitas SFT 75. Please make sure that you describe your difficulty with the Sanitas SFT 75 as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.

Ask a question about the Sanitas SFT 75

Name
Email
Reaction

View a manual of the Sanitas SFT 75 below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Sanitas
  • Product: Thermometers
  • Model/name: SFT 75
  • Filetype: PDF
  • Available languages: English, Italian, Greek, Dutch, German, French