Samsung UE32K4100AW manual

View a manual of the Samsung UE32K4100AW below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Samsung
  • Product: LED TV
  • Model/name: UE32K4100AW
  • Filetype: PDF
  • Available languages: Polish, English, Greek, Hungarian, Slovene, Croatian

Table of Contents

Page: 0
▶
❑
❑ Using the INFO button (Now & Next guide)
The display identifies the current channel and the status of certain audio-video
settings.
The Now & Next guide shows daily TV programme information for each channel
according to the broadcasting time.
N
N When you press the INFO button, a channel information banner will appear
on the top of the screen. And then press the ENTERE button, you can see
the details of the programme.
●
● Scroll ◄, ► to view information for a desired programme while watching
the current channel.
●
● Scroll ▲, ▼ to view information for other channels.
English
Page: 1
◀ ▶
❑
❑ Memorizing channels
■
■ Aerial
(Depending on the country and model)
O
O MENUm → Broadcasting → Aerial → ENTERE
Before your television can begin memorising the available channels, you must
specify the type of signal source that is connected to the TV.
English
Page: 2
◀ ▶
■
■ Auto Tuning
(Depending on the country and model)
O
O MENUm → Broadcasting → Auto Tuning → ENTERE
N
N Automatically allocated programme numbers may not correspond to actual
or desired programme numbers. If a channel is locked, the PIN input window
appears.
●
● Auto Tuning
Aerial (Terrestrial / Cable / Satellite) (Depending on the country and model):
Select the aerial source to memorise.
N
N When selecting Terrestrial, scans for a channel automatically and stores
in the TV.
Channel Type (Digital & Analogue / Digital / Analogue): Select the channel
source to memorise.
Channel Ordering (Depending on the country and model): Select the channel
order type.
English
Page: 3
◀ ▶
When selecting Cable → Digital & Analogue, Digital or Analogue
–
– Operator Selection (Depending on the country and model): Selects a
provider of cable services.
–
– Search Mode: Scans for all channels with active broadcast stations and
stores them in the TV.
N
N If you select Quick, you can set up the Network, Network ID,
Frequency, Modulation and Symbol Rate manually by pressing the
button on the remote control.
–
– Network: Selects the Network ID setting mode among Auto or Manual.
●
● Network ID: When Network is Manual, you can set up Network ID
using the numeric buttons.
English
Page: 4
◀ ▶
●
● Frequency: Displays the frequency for the channel (differs in each
country).
●
● Modulation: Displays available modulation values.
●
● Symbol Rate: Displays available symbol rates.
●
● Cable Search Option
(Depending on the country and model & cable channels only)
Sets additional search options such as the frequency and symbol rate for a
cable network search.
Start Frequency / Stop Frequency: Set the start or stop frequency (differs in
each country).
Symbol Rate: Displays available symbol rates.
Modulation: Displays available modulation values.
English
Page: 5
◀ ▶
●
● Satellite
(Depending on the country and model & satellite only)
When selecting Satellite, scans for a channel automatically and stores in the
TV.
Channel Type (All / TV / Radio): Select the channel type to memorise.
Satellite: Select the satellite to scan.
Scan Mode (All Channels / Free Channels Only): Select a scan mode for
the selected satellite.
Search Mode: Sets Search Mode using ▲/▼ buttons.
●
● Standby Auto Tuning (Depending on the country and model): Auto-tune
channels while your TV is in standby mode.
●
● Wake-up Timer (Depending on the country and model): Schedule timer to
turn the TV on and scan channels automatically.
English
Page: 6
◀ ▶
❑
❑ Using the Channel menu
■
■ Channel List
O
O MENUm → Broadcasting → Channel List → ENTERE
The Channel List contains the channels your TV displays when you press the
channel button. You can view channel information, All, TV, Radio, Data/Other,
Analogue or Favourites 1-5.
Press ► (Mode) button to change the channel mode, or press ◄ (Sorting)
button to change the channel order according to channel number or name on the
list.
N
N When you press the CH LIST button on the remote control, Channel List
screen will be displayed at once.
English
Page: 7
◀ ▶
Channel Sorting
●
● Number / Name: Arranges the channel order according to channel number or
name on the list.
Channel Mode
●
● Aerial: Switches to Terrestrial, Cable or Satellite. (Depending on the country
and model)
●
● Edit Favourites: Set channels you watch frequently as favourites.
N
N For detailed information about using Edit Favourites, refer to “Edit
Favourites”.
●
● Favourites 1-5: Shows all favourite channels, arranged in up to five groups.
Each group has a separate screen.
N
N The TV displays Favourites 1-5 only if you have added favourites using
Edit Favourites.
English
Page: 8
◀ ▶
●
● All: Shows all currently available channels.
●
● TV: Shows all currently available TV channels.
●
● Radio: Shows all currently radio channels.
●
● Data/Other: Shows all currently available MHP(Multimedia Home Platform) or
other channels.
●
● Analogue: Shows all currently available analogue channels.
English
Page: 9
◀ ▶
■
■ Guide
O
O MENUm → Broadcasting → Guide → ENTERE
The EPG (Electronic Programme Guide) information is provided by broadcasters.
Using programme schedules provided by broadcasters, you can specify
programmes you want to watch in advance so that the channel automatically
changes to the selected programme channel at the specified time. Programme
entries may appear blank or out of date depending on a channel status.
●
● a Red (Quick Nav): Viewing the TV programmes on the list quickly using
▲/▼/◄/► buttons.
●
● b Green (Channel Category): Select the type of channels you want to
display.
●
● { Yellow (Schedule Manager): Moves to the reserved programmes in
Schedule Manager.
English
Page: 10
◀ ▶
■
■ Schedule Manager
O
O MENUm → Broadcasting → Schedule Manager → ENTERE
You can set a desired channel to be displayed automatically at the intended time.
In addition, you can view, modify or delete a channel you have reserved to watch.
N
N You must set the current time first using the Time → Clock function in the
System menu to use this function.
1. Press the Schedule on the Schedule Manager screen. The Schedule
Viewing menu appears.
2. Press the ▲/▼/◄/► buttons to set each option menu.
●
● Channel: Select the desired channel.
English
Page: 11
◀ ▶
●
● Repeat: Select Once, Manual, Sat~Sun, Mon~Fri or Everyday to set at
your convenience. If you select Manual, you can set the day you want.
N
N The (c) mark indicates the day you’ve selected.
●
● Date: You can set the desired date.
N
N It is available when you select Once in Repeat.
●
● Start Time: You can set the start time you want.
N
N If you want to edit or cancel a reserved schedule, select the reserved
schedule on Schedule Manager. Then press the ENTERE button and
select the Edit or Delete.
English
Page: 12
◀ ▶
■
■ Edit Channel
O
O MENUm → Broadcasting → Edit Channel → ENTERE
You can edit or delete channels.
1. Go to Edit Channel screen.
2. Press the ▲/▼ buttons to select the desired channel, then press the
ENTERE button. The (c) mark indicates the channel you’ve selected.
N
N You can select more than one channel.
N
N Press the ENTERE again to deselect the channel.
English
Page: 13
◀ ▶
N
N Using the coloured and function buttons with the Edit Channel.
●
● a Red (Change Number): Changes channel order on the channel list.
–
– E (Done): Completes changing the channel order.
N
N Digital channel does not support this function when the Edit Channel
Number is set to Disable. (Depending on the country and model)
●
● b Green (Delete): Deletes a channel from the channel list.
●
● { Yellow (Lock / Unlock): Lock a channel so that the channel cannot be
selected and viewed. / Unlock the channel that you locked.
N
N This function is available only when the Channel Lock is set to On.
N
N The PIN input screen appears. Enter your 4-digit PIN. Change the
PIN using the Change PIN option.
English
Page: 14
◀ ▶
●
● } Blue (Select All / Deselect All): Selects or deselects all channels at
once.
●
● Ÿ (Go To): Goes to channel directly by pressing numbers (0~9).
●
● k (Page): Moves to previous or next page.
●
● T (Tools): Displays the option menu. The option menu items that appear
may differ depending on the channel status and type.
–
– Sorting (digital channels only): Changes the list ordered by channel
number or channel name.
–
– Aerial: Selects the desired broadcasting signal. (Depending on the
country and model)
English
Page: 15
◀ ▶
–
– Category: Change the channel mode to All, TV, Radio, Data/Other,
Analogue, Recently Viewed, Most Viewed. The selected channel
mode is displayed.
–
– Edit Favourites: Go to Edit Favourites screen directly.
–
– Rename channel (analogue channels only): Assign a name of up to
five characters to a channel. For example, Food, Golf, etc. This makes
it easier to find and select the channel.
–
– Channel Info: Display details of the selected channel.
–
– Information: Display details of the selected programme.
English
Page: 16
◀ ▶
■
■ Edit Favourites t
O
O MENUm → Broadcasting → Edit Favourites → ENTERE
You can add, edit or delete favourite channels.
1. Go to Edit Favourites screen.
2. Press the ▲/▼ buttons to select the desired channel, and then press
ENTERE button.
3. Choose a specific favourite list among Favourites 1-5 using b (Change Fav.)
button, and then press the } (Add) button. The selected channel has been
added in Favourites 1-5.
N
N One favourite channel can be added in several of favourites among
Favourites 1-5.
English
Page: 17
◀ ▶
N
N Using the coloured and function buttons with the Edit Favourites.
●
● a Red (Category / Change order)
–
– Category: Changes the channel mode to All, TV, Radio, Analogue,
Data/Other, Recently Viewed, Most Viewed. The selected channel
mode is displayed.
–
– Change order: Changes the favourite channel order.
–
– E (Done): Completes changing the channel order.
English
Page: 18
◀ ▶
●
● b Green (Change Fav.): Changes favourite list among Favourites 1-5.
●
● { Yellow (Select All / Deselect All): Selects or deselects all channels at
once.
●
● } Blue (Add / Delete)
–
– Add: Adds selected channels to Favourites 1-5.
–
– Delete: Deletes the favourite channel from Favourites 1-5.
English
Page: 19
◀ ▶
●
● Ÿ (Go To): Goes to channel directly by pressing numbers (0~9).
●
● k (Page): Moves to previous or next page.
●
● T (Tools): Displays the option menu. The option menu items that appear
may differ depending on the channel status and type.
–
– Copy to Favourites: Edit the selected favourite channel in Favourites
1-5.
–
– Rename Favourites: Assign your own favourite channel name.
–
– Sorting (digital channels only): Changes the list ordered by number or
name.
–
– Aerial: Selects the desired broadcasting signal. (Depending on the
country and model)
–
– Edit Channel: Go to Edit Channel screen directly.
–
– Information: Display details of the selected programme.
English
Page: 20
◀ ▶
❑
❑ Locking Programme
■
■ Programme Rating Lock
(Depending on the country)
O
O MENUm → Broadcasting → Programme Rating Lock → ENTERE
Prevent unauthorised users, such as children, from watching unsuitable
programme with a user-defined 4-digit PIN code. If the selected channel is
locked, the “\” symbol will be displayed.
N
N The items of Programme Rating Lock differs depending on the country and
model.
English
Page: 21
◀ ▶
■
■ Channel Lock
O
O MENUm → Broadcasting → Channel Lock → ENTERE
Lock channels in Channel menu to prevent unauthorised users, such as children,
from watching unsuitable programme.
N
N Available only when the Source is set to TV.
English
Page: 22
◀ ▶
❑
❑ Other Features
■
■ Channel Settings
O
O MENUm → Broadcasting → Channel Settings → ENTERE
●
● Country (Area)
(Depending on the country and model)
Selects your country (or area) so that the TV can correctly auto-tune the
broadcasting channels.
English
Page: 23
◀ ▶
●
● Manual Tuning
Scans for a channel manually and stores in the TV.
N
N If a channel is locked, the PIN input window appears.
N
N According to the channel source, Manual Tuning may be supported.
●
● Digital Channel Tuning: Scans for a digital channel manually and stores
in the TV. Press the New button to search the digital channels. When
scanning has finished, a channel is updated in the channel list.
–
– When selecting Aerial → Terrestrial: Channel, Frequency,
Bandwidth
–
– When selecting Aerial → Cable: Frequency, Modulation, Symbol
Rate
English
Page: 24
◀ ▶
●
● Analogue Channel Tuning: Scans for an analogue channel. Press the
New button to search the channels by adjusting the Programme, Colour
System, Sound System, Channel, Search.
N
N Channel mode
–
– P (programme mode): When tuning is complete, the broadcasting
stations in your area have been assigned to the position numbers
from P0 to P99. You can select a channel by entering the position
number in this mode.
–
– C (aerial channel mode) / S (cable channel mode): These two
modes allow you to select a channel by entering the assigned
number for each aerial broadcasting station or cable channel.
●
● Satellite (Depending on the country and model): Scans for a satellite
channel. Press the Scan button to search the channels by adjusting the
Transponder, Scan Mode, Network Search.
English
Page: 25
◀ ▶
●
● Fine Tune
(Analogue channels only)
If the signal is weak or distorted, fine tune the channel manually.
N
N Fine tuned channels are marked with an asterisk “*”.
N
N To reset the fine-tuning, select Reset.
●
● Transfer Channel List
(Depending on the country and model)
Imports or exports the channel map. You should connect a USB storage to
use this function.
N
N The PIN number input screen appears. Enter your 4 digit PIN number.
N
N Supported file systems are FAT and exFAT.
●
● Delete CAM Operator Profile: Selects the CAM operator to delete.
(Depending on the country and model)
English
Page: 26
◀ ▶
●
● Satellite System (Depending on the country and model)
Configure settings for your satellite equipment
N
N The PIN number input screen appears. Enter your 4 digit PIN number.
N
N To reset the Satellite System, select Reset all settings.
English
Page: 27
◀ ▶
■
■ Subtitle t
O
O MENUm → Broadcasting → Subtitle → ENTERE
Use this menu to set the Subtitle mode.
●
● Subtitle: Switches subtitles on or off.
●
● Subtitle Mode: Sets the subtitle mode.
N
N If the programme you are watching does not support the Hearing
Impaired function, Normal automatically activates even if the
Hearing Impaired mode is selected.
●
● Subtitle Language: Select the subtitle language.
N
N The available language may differ depending on the broadcast.
N
N English is the default in cases where the selected language is
unavailable in the broadcast.
English
Page: 28
◀ ▶
●
● Primary Subtitle: Sets the primary subtitle.
●
● Secondary Subtitle: Sets the secondary subtitle.
■
■ Edit Channel Number (Depending on the country and model)
O
O MENUm → Broadcasting → Edit Channel Number → ENTERE
Use this change channel number. When channel number is changed, channel
information is not updated automatically.
English
Page: 29
◀ ▶
■
■ Audio Options
(Depending on the country and model)
O
O MENUm → Broadcasting → Audio Options → ENTERE
●
● Audio Language t
Change the default value for audio languages.
Audio Language / Primary Audio / Secondary Audio: You can set the
primary or secondary audio.
N
N The available language may differ depending on the broadcast.
English
Page: 30
◀ ▶
●
● Audio Format
(Depending on the country and model)
When sound is emitted from both the main speaker and the audio receiver,
a sound echo may occur due to the decoding speed difference between
the main speaker and the audio receiver. In this case, use the TV Speaker
function.
N
N Audio Format option may differ depending on the broadcast. 5.1ch
Dolby digital sound is only available when connecting an external speaker
through an optical cable.
●
● Audio Description (Depending on the country and model)
This function handles the Audio Stream for the AD (Audio Description) which
is sent along with the Main audio from the broadcaster.
Audio Description: Turn the audio description function on or off.
Volume: Adjust the audio description volume.
English
Page: 31
◀ ▶
■
■ Teletext Language
(Depending on the country and model)
O
O MENUm → Broadcasting → Teletext Language → ENTERE
●
● Teletext Language
N
N English is the default in cases where the selected language is unavailable
in the broadcast.
●
● Primary teletext / Secondary teletext
N
N Primary teletext and Secondary teletext may not be supported in
some locations.
English
Page: 32
◀ ▶
■
■ Digital Text
(UK only)
O
O MENUm → Broadcasting → Digital Text → ENTERE
N
N If the programme broadcasts with digital text, this feature is enabled.
N
N MHEG (Multimedia and Hypermedia Information Coding Experts Group)
An International standard for data encoding systems used in multimedia and
hypermedia. This is at a higher level than the MPEG system which includes
data-linking hypermedia such as still images, character service, animation,
graphic and video files as well as multimedia data. MHEG is user runtime
interaction technology and is being applied to various fields including VOD
(Video-On-Demand), ITV (Interactive TV), EC (Electronic Commerce), tele
education, teleconferencing, digital libraries and network games.
English
Page: 33
◀ ▶
■
■ Common Interface
O
O MENUm → Broadcasting → Common Interface → ENTERE
(Depending on the country and model)
●
● CI Menu: This enables the user to select from the CAM-provided menu.
Select the CI Menu based on the menu CI CARD.
●
● CAM video transcoding: You can configure the setting to transcode the
video codec from the CAM automatically. Turn it Off if you do not want to use
it.
N
N You must use a CAM that supports transcoding the video codec.
English
Page: 34
◀ ▶
●
● Application Info: View information on the CAM inserted into the CI slot and
on the “CI or CI+ CARD” which is inserted into the CAM. You can install the
CAM anytime whether the TV is on or off.
1. Purchase a CI CAM module at your nearest dealer or by phone.
2. Firmly insert the “CI or CI+ CARD” into the CAM in the direction of the
arrow.
3. Insert the CAM with the “CI or CI+ CARD” into the common interface slot,
in the direction of the arrow so that it aligns parallel with the slot.
4. Check if you can see a picture on a scrambled signal channel.
English
Page: 35
◀ ▶
❑
❑ Changing the Preset Picture Mode
■
■ Picture Mode t
O
O MENUm → Picture → Picture Mode → ENTERE
Select your preferred picture type.
N
N When connecting a PC, you can only make changes to the Entertain and
Standard.
●
● Dynamic: Suitable for a bright room.
●
● Standard: Suitable for a normal environment.
●
● Natural (depending on the model): Suitable for reducing eye strain.
●
● Movie: Suitable for watching movies in a dark room.
●
● Entertain: Suitable for watching movies and games.
N
N It is only available when connecting a PC.
English
Page: 36
◀ ▶
❑
❑ Adjusting Picture Settings
■
■ Backlight / Contrast / Brightness / Sharpness / Colour / Tint (G/
R)
Your television has several setting options for picture quality control.
N
N NOTE
●
● In analogue TV, Ext., AV modes of the PAL system, the Tint (G/R)
function is not available. (Depending on the country and model)
●
● When connecting a PC, you can only make changes to Backlight,
Contrast, Brightness and Sharpness.
●
● Settings can be adjusted and stored for each external device connected
to the TV.
●
● Lowering picture brightness reduces power consumption.
English
Page: 37
◀ ▶
■
■ Picture Size
O
O MENUm → Picture → Picture Size → ENTERE
Set the various picture options such as picture size and aspect ratio.
N
N The available items may differ depending on the selected mode.
N
N Depending on the input source, the picture size options may vary.
●
● Picture Size t: Your cable box/satellite receiver may have its own set
of screen sizes as well. However, we highly recommend you use 16:9 mode
most of the time.
Auto Wide: Automatically adjusts the picture size to the 16:9 aspect ratio.
16:9: Sets the picture to 16:9 wide mode.
English
Page: 38
◀ ▶
Wide Zoom: Magnifies the picture size more than 4:3.
N
N Adjusts the Position by using ▲, ▼ buttons.
Zoom: Magnifies the 16:9 wide pictures vertically to fit the screen size.
N
N Adjusts the Zoom or Position by using ▲, ▼ button.
4:3: Sets the picture to basic (4:3) mode.
N
N Do not watch in 4:3 format for a long time. Traces of borders displayed
on the left, right and centre of the screen may cause image retention
(screen burn) which are not covered by the warranty.
Screen Fit: Displays the full image without any cut-off when HDMI (720p /
1080i / 1080p) or Component (1080i / 1080p) signals are inputted (Depending
on the country and model).
Custom: Magnifies or shrinks 16:9 pictures vertically and/or horizontally. A
magnified or shrunk picture can be moved left, right, up, and down.
English
Page: 39
◀ ▶
●
● Zoom/Position: Adjust the picture size and position. It is only available in
Zoom and Custom.
●
● Position: Adjust the picture position. It is only available in Screen Fit or Wide
Zoom.
English
Page: 40
◀ ▶
N
N NOTE
●
● After selecting Screen Fit in HDMI (1080i / 1080p) or Component (1080i
/ 1080p) mode, you may need to centre the picture (Depending on the
country and model):
1. Select the Position. Press the ENTERE button.
2. Press the ▲, ▼, ◄ or ► button to move the picture.
●
● If you want to reset the position you adjusted, select Reset in the
Position screen. The picture will be set to its default position.
●
● If you use the Screen Fit function with HDMI 720p input, 1 line will be cut
at the top, bottom, left and right as in the overscan function.
●
● 4:3 Screen Size: Available only when picture size is set to Auto Wide. You
can determine the desired picture size at the 4:3 WSS (Wide Screen Service)
size or the original size. Each European country requires different picture size.
English
Page: 41
◀ ▶
■
■ PIP t
O
O MENUm → Picture → PIP → ENTERE
You can watch the TV tuner and one external video source simultaneously. For
example, if you have a cable box connected to the Cable In jack, you can use
PIP to watch programmes from the cable box and watch a movie from a Blu-ray
player attached to the HDMI In jack. PIP does not function in the same mode.
N
N NOTE
●
● If you turn the TV off while watching in PIP mode, the PIP window will
disappear.
●
● You may notice that the picture in the PIP window becomes slightly
unnatural when you use the main screen to view a game or karaoke.
English
Page: 42
◀ ▶
●
● PIP settings
Main picture Sub picture
Component, HDMI1, HDMI2/DVI TV
●
● PIP: Activate or deactivate the PIP function.
●
● Aerial (Depending on the country and model): Select aerial for the sub-
screen.
●
● Channel: Select the channel for the sub-screen.
●
● Size (õ / ã): Select a size for the sub-picture.
●
● Position (ã / – / — / œ): Select a position for the sub-picture.
●
● Sound Select: You can choose the desired sound in PIP mode.
English
Page: 43
◀ ▶
❑
❑ Changing the Picture Options
■
■ Advanced Settings
O
O MENUm → Picture → Advanced Settings → ENTERE
(Available in Standard / Movie mode)
You can adjust the detailed setting for the screen including colour and contrast.
N
N When connecting a PC, you can only make changes to the White Balance
and Gamma.
●
● Dynamic Contrast: Adjust the screen contrast.
●
● Black Tone: Select the black level to adjust the screen depth.
●
● Flesh Tone: Adjust the flesh tone colour.
English
Page: 44
◀ ▶
●
● RGB Only Mode: Displays the Red, Green and Blue colour for making fine
adjustments to the hue and saturation.
●
● Colour Space: Adjust the range of colours available to create the image.
●
● White Balance: You can adjust the colour temperature of the picture to make
white objects look white, and the overall picture appear natural.
R-Offset / G-Offset / B-Offset: Adjusts each colour’s (red, green, blue)
darkness.
R-Gain / G-Gain / B-Gain: Adjusts each colour’s (red, green, blue)
brightness.
Reset: Resets the White Balance to its default settings.
English
Page: 45
◀ ▶
●
● Gamma: Adjust the primary colour intensity.
●
● Motion Lighting: Reduce power consumption by brightness control adapted
motion.
N
N Only available in Standard mode.
N
N When changing a setting value of Backlight, Brightness or Contrast,
Motion Lighting will be set to Off.
English
Page: 46
◀ ▶
■
■ Picture Options
O
O MENUm → Picture → Picture Options → ENTERE
N
N When connecting a PC, you can only make changes to the Colour Tone.
●
● Colour Tone
N
N Warm1 or Warm2 will be deactivated when the picture mode is
Dynamic.
N
N Settings can be adjusted and stored for each external device connected
to an input on the TV.
●
● Digital Clean View: If the broadcast signal received by your TV is weak, you
can activate the Digital Clean View feature to reduce any static and ghosting
that may appear on the screen.
N
N When the signal is weak, try other options until the best picture is
displayed.
English
Page: 47
◀ ▶
Auto Visualisation: When changing analogue channels, displays signal
strength.
N
N Only available for analogue channels.
N
N When the INFO button is pressed, the signal strength bar is displayed.
N
N When bar is green, you are receiving the best possible signal.
●
● MPEG Noise Filter: Reduces MPEG noise to provide improved picture
quality.
●
● HDMI Black Level: Selects the black level on the screen to adjust the screen
depth.
N
N Available only in HDMI mode (RGB signals).
English
Page: 48
◀ ▶
●
● Film Mode: Sets the TV to automatically sense and process film signals from
all sources and adjust the picture for optimum quality.
N
N Available in TV mode and external input mode which supports SD (480i /
576i) and HD (1080i) except in PC mode.
N
N If the screen does not seem natural, change its option to Off / Auto1 /
Auto2 in Film Mode.
English
Page: 49
◀ ▶
●
● Motion Plus (Depending on the country and model): Removes blurring and
judder from scenes with rapid movement. If you select Custom, you can
configure Blur Reduction and Judder Reduction manually and set LED
Clear Motion to On for a sharper LED image. To return to the default settings,
select Reset.
N
N This function is not available on certain models in specific geographical
areas.
N
N When LED Clear Motion is set to On, the screen appears darker than
when it is Off.
N
N If LED Clear Motion is On at 60Hz video signal, the screen may flicker.
●
● Analogue Clean View: Reduces noise in the form of a diagonal line that
occurs due to interferences between signals.
N
N This function is only supported for analogue broadcasts.
English

Question & answers

There are no questions about the Samsung UE32K4100AW yet.

Ask a question about the Samsung UE32K4100AW

Have a question about the Samsung UE32K4100AW but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Samsung UE32K4100AW. Please make sure that you describe your difficulty with the Samsung UE32K4100AW as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.