Samsung SRN-1673S manual

View a manual of the Samsung SRN-1673S below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Samsung
  • Product: Digital Video Recorder
  • Model/name: SRN-1673S
  • Filetype: PDF
  • Available languages: English

Table of Contents

Page: 1
Copyright
©2015 Samsung Techwin Co., Ltd. All rights reserved.
Trademark
is the registered logo of Samsung Techwin Co., Ltd.
The name of this product is the registered trademark of Samsung Techwin Co., Ltd.
Other trademarks mentioned in this manual are the registered trademark of their respective company.
Restriction
Samsung Techwin Co., Ltd shall reserve the copyright of this document. Under no circumstances, this document shall be reproduced,
distributed or changed, partially or wholly, without formal authorization of Samsung Techwin.
Disclaimer
Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but no formal guarantee shall be
provided. Use of this document and the subsequent results shall be entirely on the user’s own responsibility. Samsung Techwin reserves the
right to change the contents of this document without prior notice.
™
™Design and specifications are subject to change without prior notice.
™
™The initial administrator ID is “admin” and the password should be set when logging in for the first time.
Set password for your wireless network if you use the product with a wireless router. Being not protected with password or
using the default wireless router password may expose your video data to potential threat.
Please change your password every three months to safely protect personal information and to prevent the damage of the
information theft.
Please, take note that it’s a user’s responsibility for the security and any other problems caused by mismanaging a password.
Network Video Recorder
User Manual
Page: 2
English _3
●
overview
Important Safety Instructions
Read these operating instructions carefully before using the unit.
Follow all the safety instructions listed below.
Keep these operating instructions handy for future reference.
1)	 Read these instructions.
2)	 Keep these instructions.
3)	 Heed all warnings.
4)	 Follow all instructions.
5)	 Do not use this apparatus near water.
6)	 Clean only with dry cloth.
7)	 Do not block any ventilation openings, Install in accordance with the manufacturer's instructions.
8)	 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9)	 Do not defeat the safety purpose of the polarized or grounding- type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has two blades and a third grounding prong. The
wide blade or the third prong are provided for your safety. if the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
10)	 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11)	 Only use attachments/accessories specified by the manufacturer.
12)	 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer,
or sold with the apparatus. When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
13)	 Unplug this apparatus during lightning storms or when unused for long periods of
time.
14)	 Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
Standards Approvals
M
M `
` This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the
FCC Rules.These limits are designed to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area
is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
overview
Page: 3
4_ overview
overview
Before Start
This manual provides operational information necessary for using the product and contains a description about each
component part and its function as well as menu or network settings.
You have to keep in mind the following notices :
•
• SAMSUNG retains the copyright on this manual.
•
• This manual cannot be copied without SAMSUNG's prior written approval.
•
• We are not liable for any or all losses to the product incurred by your use of non-standard product or violation of
instructions mentioned in this manual.
•
• Prior to opening the case, please consult a qualified technician first. Whenever this is needed power must be
removed from the unit.
•
• Before adding a hard disk drive or external storage (USB memory, USB HDD, etc), check if it is compliant with this
product. For the compatibility list, contact the retailer.
Warning
Battery
It is essential that when changing the battery in the unit, the replacement battery must be of the same type
otherwise there may be a possibility of an explosion.
The following are the specifications of the battery you are using now.
•
• Normal voltage : 3V
•
• Normal capacity : 65mAh
•
• Continuous standard load : 0.2mA
•
• Operating temperature : 
-20°C ~ +60°C
(-4°F ~ +140°F)
•
• A secondary battery (Rechargeable)
Caution
•
• Connect the power cord into a grounded outlet.
•
• The Mains plug is used as a disconnect device and shall stay readily operable at any time.
•
• Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
•
• Risk of Explosion if Battery is replaced by an Incorrect Type. Dispose of Used Batteries According to the
Instructions.
System Shutdown
Turning off the power while the product is in operation, or undertaking improper actions may cause damage or
malfunction to the hard drive or the product.
To safely turn off the power, check <OK> in the system termination pop up window and then remove the power
chord.
You may want to install a UPS system for safe operation in order to prevent damage caused by an unexpected
power stoppage. (Any questions concerning UPS, consult your UPS retailer.)
J
J `
` If powered off abnormally, restarting may take more time for restoring data from hard disk drive for proper operation.
CALIFORNIA USA ONLY
This Perchlorate warning applies only to primary CR (Manganese Dioxide)
Lithium coin cells in the product sold or distributed ONLY in California USA.
"Perchlorate Material - special handling may apply,
See www.dtsc.ca.gov/hazardouswaste/perchlorate."
Page: 4
English _5
●
overview
Operating Temperature
The guaranteed operating temperature range of this product is 0°C ~ 40°C (32°F ~ 104°F).
This product may not work properly if you run right after a long period of storage at a temperature below the
guaranteed one.
Prior to using a device that has been stored for a long period in low temperatures, allow the product to stand at
room temperature for a period.
Especially for the built-in HDD in the product, its guaranteed temperature range is 5°C ~ 55°C (41°F ~ 131°F).
Likewise, the hard drive may not work at a temperature below the guaranteed one.
Ethernet Port
This equipment is in door use and all the communication wirings are limited to inside of the building.
Security Precautions
The initial administrator ID is “admin” and the password should be set when logging in for the first time.
Set password for your wireless network if you use the product with a wireless router. Being not protected with
password or using the default wireless router password may expose your video data to potential threat.
Please change your password every three months to safely protect personal information and to prevent the
damage of the information theft.
Please, take note that it’s a user’s responsibility for the security and any other problems caused by
mismanaging a password.
Page: 5
6_ overview
overview
Contents
overview
3
3	 Important Safety Instructions
4	 Before Start
6	Contents
8	Features
12	 Part Names and Functions (Front)
13	 Part Names and Functions (Rear)
15	 Remote Control
installation
17
17	 Checking the Installation Environment
18	 Rack Installation
19	 HDD Addition
connecting with other device
26
26	 Connecting to an External Device
27	 Connecting the USB
28	 Connecting the Alarm Input/Output
31	 Connecting the Network
live
34
34	 Getting Started
38	 Live Screen Configuration
45	 Live Screen Mode
49	Zoom
50	 PoE Status
51	Layout
52	 Audio ON/OFF
52	Freeze
53	 Event Monitoring
54	Maintain the Screen Ratio
55	Display Text
56	 PTZ Control
menu setup
59
59	 System Setup
70	 Setting the Device
89	 Setting the Recording
93	 Setting the Event
97	 Network Configuration
Page: 6
English _7
●
overview
search & play
109
109	Search
113	Playback
starting web viewer
115
115	 What is Web Viewer?
116	 Connecting Web Viewer
live viewer
118
118	 Live Viewer
120	 Live Screen Configuration
126	 Controlling a Connected Network Camera
search viewer
128
128	 Search Viewer
setup viewer
133
133	 Setup Viewer
backup viewer
151
151	 SEC Backup Viewer
appendix
153
153	 Product Specification
159	 Product Overview
162	 Default Setting
166	Troubleshooting
170	 Open Source License Report on the Product
Page: 7
8_ overview
overview
Features
The product records video and audio from network cameras to a hard disk, and enables playback from the hard disk.
It also provides remote monitoring environment for video and audio over the network using a remote computer.
•
• User-friendly UI
•
• VGA, 4CIF, record in a max of 4096x2160 (8M pixel) supported
•
• Record and play video
•
• Record and play audio
•
• Supports ONVIF Profile S standard and RTP / RTSP protocols
•
• Full HD video output via HDMI
•
• Display the HDD operation status by HDD SMART
•
• HDD overwrite enabled
•
• Backup using USB 2.0 protocols and external HDD
•
• Simultaneous playback of 4, 8, or 16 channels
•
• Various Search Modes (Search by Time, Event, Text, Backup)
•
• Various Recording Modes (Normal, Event, Scheduled Recording)
•
• Alarm Input / Output
•
• Remote Monitoring function by Windows Network Viewer
•
• Live monitoring of the network camera
•
• Installation Wizard Function (Quick Setup)
Page: 8
English _9
●
overview
Package Contents
Please unwrap the product, and place the product on a flat place or in the place to be installed.
Please check the following contents are included in addition to the main unit.
SRN-473S
REC
ALARM
POWER
NETWORK VIDEO RECORDER
NVR Mouse
Power Cable Power Adaptor
Remote Control /
Remote Control Battery (AAA)
Network Viewer Software /
User Manual CD
User Manual or Quick Manual Terminal block
M
M `
` Two additional screws are provided to install an HDD for models that come without an HDD installed.
Page: 9
10_ overview
overview
SRN-873S
DV25
SRN-475S
NETWORK VIDEO RECORDER
REC HDD ALARM NETWORK BACKUP POWER
NVR Mouse
Power Cable
Network Viewer Software /
User Manual CD
Remote Control /
Remote Control Battery (AAA)
User Manual or Quick Manual Bracket rack Bracket mounting screws
Terminal block
Page: 10
English _11
●
overview
SRN-1673S
USB
NETWORK VIDEO RECORDER
NVR Mouse
Power Cable
Network Viewer Software /
User Manual CD
Remote Control /
Remote Control Battery (AAA)
User Manual or Quick Manual Bracket rack Bracket mounting screws
Terminal block
Page: 11
12_ overview
overview
Part Names and Functions (Front)
SRN-473S
SRN-873S
SRN-1673S
Part Names Functions
a LED Indicator
REC : Lights on when recording is in progress.
HDD : Displays the normal access to HDD.
LED turns on when accessing the hard disk.
ALARM : Lights on when an event occurs.
NETWORK : Displays both network connection and data transfer status.
BACKUP : Displays when Backup is in progress.
POWER : Shows the power ON/OFF status.
b USB Connects the USB devices.
c
Remote Reception
System
Receive the signal from the remote control.
REC
ALARM
POWER
NETWORK VIDEO RECORDER
b
a
c
DV25
SRN-475S
NETWORK VIDEO RECORDER
REC HDD ALARM NETWORK BACKUP POWER
a
b
c
USB
NETWORK VIDEO RECORDER
b
a
Page: 12
English _13
●
overview
Part Names and Functions (Rear)
SRN-473S
SRN-873S
SRN-1673S
Part Names Functions
a Ground connection
A terminal to connect a separate ground cable.
`
` Make sure to add a ground cable in order to use the equipment safely.
b PoE (CAMERA) Power supply port to connect to a camera.
c Power Terminal to connect power to.
d
VIEWER Port used to send video to the web viewer.
SWITCH
Port connected to a camera, and you can access the camera's web viewer to setup detailed
camera settings.
HDMI
eSATA VGA OUT AUDIO OUT
USB
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
1 2 3 4 5 6 7 8
NO
COM COM COM COM
NC NO NO NO
1 2 3 4
ALARM IN
PoE
ALARM OUT
G
G
ALARM
RESET
CONSOLE
VIEWER
CAMERA
SWITCH
b h
d k jg e f i
c
a
HDMI
AUDIO
OUT
1
2
3
4
PoE
CAMERA
VGA OUT VIEWER DC 54V
a b
c
d
e
f
g
h
G
1 2 3
1 2 3
4 NC
NO NO NO
COM COM COM
ALARM
OUT
ALARM
IN
AC 100
240~IN
VGA OUT
VIEWER
AUDIO
OUT
HDMI
CONSOLE
eSATA
PoE
CAMERA
1
2
3
4
5
6
7
8
d e
j gf
b h ci
a
Page: 13
14_ overview
overview
Part Names Functions
e VGA OUT VGA Video Signal Output Port.
f AUDIO OUT Audio Signal Output Port (RCA jack).
g HDMI HDMI connector port.
h ALARM
-
- ALARM IN : Alarm input ports.
SRN-473S : 1~2 CH
SRN-873S : 1~4 CH
SRN-1673S : 1~8 CH
-
- ALARM OUT : Alarm output ports.
SRN-473S : 1CH
SRN-873S : 1~3 CH
SRN-1673S : 1~4 CH
-
- ALARM RESET : Alarm Reset port.
`
` Applicable only to the SRN-1673S model.
i Power Switch Power on/off switch.
j eSATA Ports used for external storage device connections.
k USB Connects the USB devices.
M
M `
` [CONSOLE] is designed for the service repair purpose only.
Page: 14
English _15
●
overview
Remote Control
POWER
Displays the Exit pop up screen.
REC
Starts or ends the live recording.
ID
Sets the ID of the system.
Select 2 digits from 0 ~ 9 while pressing the ID Key.
VIEW
Runs the View function in the PTZ mode.
BACKUP
Displays the Backup Menu.
RETURN
Returns to the previous screen.
REC LOCK
Selects the recording lock function.
AUDIO
Turns Audio on/off.
Up/Down/Left/Right($%_ +)/ENTER
Moves the cursor up/down/left/right, and runs the
Select Menu.
Move Frame
While paused, moves to the previous/next frame.
SCROLL ,.
Moves the menu scroll.
FR, STOP, PLAY/PAUSE, FF
MODE
Changes the screen mode.
MENU
Display the live screen menu.
ZOOM
Runs the digital zoom (x2) function.
NUMBER [0~+10]
Used as the numeric input keys, or displays a single
channel.
T/W
Zooms in or out.
PTZ
Displays or ends PTZ.
SEARCH
Displays the search menu.
PRESET
Displays the Preset Setup.
FREEZE
Freezes the screen temporarily.
Skip Backward (by unit time),
Slow Rewind, Slow Forward,
Skip Forward (by unit time)
ALARM
Cancels the Alarm.
Page: 15
16_ overview
overview
Using the Numeric buttons
CHANNEL 1–9 Press each button between 1 to 9.
CHANNEL 10 Press the [+10] button first, then press the 0 button again within 3 seconds.
CHANNEL 11–16 Press the [+10] button first, then press any number between 1 to 6 within 3 seconds.
Changing the Remote Control ID
Remote control’s ID and NVR’s ID should be matched for proper operation.
1.	 Press the [ID] button of the remote control and check the ID displayed on the NVR screen.
The factory default ID of the remote control is 00.
2.	 Enter 2 digits of your selection in order, while pressing the [ID] button of the remote control.
3.	 When ID input is done, press the [ID] button of the remote control again to check the setting.
M
M `
` If you want to change the remote control ID to 08: Press 0 and 8 in order while the [ID] button of the remote control is
pressed.
For changing the ID of remote device, refer to “Remote Devices”. (Page 85)
Page: 16
English _17
●
installation
installation
Please take note of the followings before using this product.
•
• Do not use the product outdoor.
•
• Do not spill water or liquid in the connection part of the product.
•
• Do not impose the system to excessive shock or force.
•
• Do not pull out the power plug forcefully.
•
• Do not disassemble the product on your own.
•
• Do not exceed the rated input/output range.
•
• Use a certified power cord only.
•
• For the product with an input ground, use a grounded power plug.
Checking the Installation Environment
This product is a top-notch security device that is equipped
with a high-capacity HDD and other key circuit boards.
Note that an excessive internal temperature of the product may
cause a system failure or a shortened product life (see the right
figure). Keep in mind the following instructions before installing
the product.
When mounting the product on a rack, comply with the following instructions.
1.	 Please ensure that the rack inside is not sealed.
2.	 Please ensure the air is circulated through the inlet/outlet as shown in the picture.
3.	 If you pile up the prudcts or other rack-mount devices as shown in figure 2, secure room for
ventilation or install a vent.
4.	 For natural air convection, place the inlet at the bottom of the rack and the outlet on top.
5.	 It is strongly recommended that a fan motor is installed at the inlet and the outlet for air
circulation. (Please fit a filter at the inlet to screen dust or foreign substances.)
6.	 Please maintain the temperature inside the rack or surrounding areas between 0°C ~ 40°C
(32°F ~ 104°F) as shown in the figure 1.
Rack Mount Instructions - The following or similar rack-mount instructions are included with
the installation instructions :
A)	Elevated Operating Ambient - If installed in a closed or multi-unit rack assembly, the
operating ambient temperature of the rack environment may be greater than room
ambient. Therefore, consideration should be given to installing the equipment in an
environment compatible with the maximum ambient temperature (Tma) specified by the
manufacturer.
B)	Reduced Air Flow - Installation of the equipment in a rack should be such that the amount of air flow required
for safe operation of the equipment is not compromised.
C)	Mechanical Loading - Mounting of the equipment in the rack should be such that a hazardous condition is
not achieved due to uneven mechanical loading.
D)	Circuit Overloading - Consideration should be given to the connection of the equipment to the supply circuit
and the effect that overloading of the circuits might have on overcurrent protection and supply wiring.
Appropriate consideration of equipment nameplate ratings should be used when addressing this concern.
E)	Reliable Earthing - Reliable earthing of rack-mounted equipment should be maintained. Particular attention should
be given to supply connections other than direct connections to the branch circuit (e.g. use of power strips).
One Year: 24HR X 365 DAY =8,760 HR
Temperature
Unit: ºC
Life (Unit: HOURS)
[Figure 1]
[Figure 2]
Page: 17
18_ installation
installation
Rack Installation
Install the Bracket-Rack as shown in the figure, and then fasten the
screws on both sides (2 screws on each side).
`
` Fix the screws not to be loosened by vibrations.
Cautions when Installing in the Rack
To install multiple NVRs in the rack, make sure to separate the FOOT at the bottom of each NVR.
1.	 There are four FOOTs at the bottom of a NVR.
Press the projected parts at both-ends of each “FOOT” and
turn it counterclockwise.
2.	 “FOOT” is separated from the main body when it is turned
to the end of fastening groove.
<Separation> <Installation>
Page: 18
English _19
●
installation
HDD Addition
Make sure to unplug the power cord from the wall outlet to prevent possible electric shock, injury or product damage.
Please consult your provider for further information on HDD installation since improper installation or settings may
damage the product.
`
` Number of HDDs supported : 
SRN-473S : max 1
SRN-873S : max 2
SRN-1673S : max 4 can be added.
`
` Make sure to unplug the power cord from the wall outlet before proceeding with the installation.
J
J `
` Cautions for data loss (HDD care)
Please pay attention so that the data inside the HDD is not damaged.
Before adding a HDD, please check the compatibility with this product.
HDD is vulnerable to malfunction due to its sensitive nature especially against shock when operating.
Please ensure that the HDD is free from such shock.
We are not liable for any damage to the HDD incurred by user's carelessness or miss use.
`
` Cases might cause damage to HDD or recorded data
To minimize the risk of data loss from a damaged HDD, please backup data as often as possible.
If exposed to shock when disassembling or installing, data stored in the hard disk may be damaged.
A sudden power failure or turning off the product while in HDD operation may damage the hard disk drive.
HDD or files stored inside may be damaged if the main body is moved or impacted during the HDD operation.
Cautions when installing a HDD
1.	 Do not apply excessive force to the HDD.
2.	 Pay attention so as not to lose the disassembly screws or accessories.
`
` If the screws or accessories are not put together correctly, the product may breakdown or not operate properly.
3.	 Please check the HDD compatibility before adding a HDD.
`
` Please contact your nearest dealer to obtain the list of compatible devices.
Page: 19
20_ installation
installation
Installing the HDD
J
J `
` If the installed HDD had been used with other devices, it will be automatically formatted.
How to install an HDD in SRN-473S
1.	 After unscrewing, push back and remove the cover.
2.	 Loosen a setscrew of the bracket.
3.	 Push the bracket in the direction of the arrow on the
board and remove it.
Page: 20
English _21
●
installation
4.	 After inserting the HDD into the bracket, tighten the
left and right screws to fix it.
5.	 Locate the bracket with the HDD installed in a
groove of the case, push it in the arrow direction and
connect a power data port on the board.
6.	 Tighten a setscrew of the bracket.
7.	 Close the cover, and tighten a setscrew in the back.
Page: 21
22_ installation
installation
How to install an HDD in SRN-873S
1.	 First of all, loosen the screws in the left, right, and
back of the case, and remove the cover.
2.	 Loosen a screw from the HDD bracket and remove
the bracket.
`
` While applying pressure to both side end grips of the bracket,
pull them forward to remove the HDD bracket from the main
body.
3.	 After aligning and inserting one side of the HDD to
the bracket, open the other side bracket wide and
insert the HDD between them.
`
` Align a hole in the bracket with a screw hole in the HDD to fix
them.
G
1
2
3
1
2
3
4
NC
NO
NO
NO
COM
COM
COM
ALA
RM
OU
T
ALA
RM
IN
eSA
TA
VIE
WE
R
Po
E
CA
ME
RA
1
2
3
4
5
6
7
8
CON
SOL
E
Page: 22
English _23
●
installation
4.	 Push the bracket with the HDD installed and tighten
the screws to fix it.
5.	 Close the cover and tighten the screws to fix it.
G
1
2
3
1
2
3
4
NC
NO
NO
NO
COM
COM
COM
ALA
RM
OU
T
ALA
RM
IN
eSA
TA
VIE
WE
R
Po
E
CA
ME
RA
1
2
3
4
5
6
7
8
CON
SOL
E
Page: 23
24_ installation
installation
How to install an HDD in SRN-1673S
•
• How to open the front cover and install an HDD
1.	 Pull open the front cover.
2.	 Open the front cover and check the HDD installation
bracket.
J
J `
` Release the USB connection before opening the front
cover to prevent damage to the USB port.
3.	 Push the latch to the right and remove the HDD
bracket.
J
J `
` Take care not to scratch your hands when removing the
HDD bracket.
Page: 24
English _25
●
installation
4.	 Align and insert HDD into the bracket home. After
inserting one side, push and insert the other side
slightly.
5.	 Align the bracket with the HDD installed with the
enclosure latch, and push the bracket in the direction
of the board.
J
J `
` Push it until you hear the latch lock sound. If the HDD is
not completely connected, it may be detected.
6.	 Push the front cover upwards and close it.
•
• How to exchange an installed HDD
1.	 Open a bracket wide in the direction of the arrow and
remove the holder from the HDD.
2.	 Open the other bracket wide and remove it from the
holder.
M
M `
` The procedure after HDD exchange is the same as the
procedure for "Installing the HDD".
Page: 25
26_ connecting with other device
connecting with other device
Connecting to an External Device
M
M `
` The following figures are based on Model SRN-1673S.
J
J `
` Unrated or improper power source may cause damage to the system. Ensure that you use only the rated power source
before pressing the POWER button.
HDMI
eSA
TA
VGA
OUT
AUD
IO OUT
USB
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
1 2 3 4 5 6 7 8
NO
COM
COM
COM
COM
NC NO
NO
NO
1
2
3
4
ALARM IN
PoE
ALARM OU
T
G
G
ALA
RM
RES
ET
CONSO
LE
VIEWER
CAMERA
SWITCH
VIDEO OUT
(VGA)
AUDIO OUT
HDMI OUT
Page: 26
English _27
●
connecting
with
other
device
Connecting the USB
1.	 On the front of the product, there is a USB port.
2.	 USB HDD, memory, or a mouse can be connected to USB ports.
3.	 If a USB HDD is connected to the system, recognition and settings are available in "Setup > Device > Storage
Device". (Page 83)
4.	 The product supports hot plugging function that enables connecting/disconnecting USB devices while in
operating the system.
J
J `
` If you use the USB device for Backup purposes, format it with FAT32 on PC if it is not formatted on the NVR.
`
` Some USB devices may fail to function properly due to compatibility issue, please check the device before using.
`
` Only USB storage devices that comply with the standards (having a metal cover) are guaranteed for data transfer. In case if
the USB device’s electric contacts have been worn out, data transfer between the devices may not properly function.
Page: 27
28_ connecting with other device
connecting with other device
Connecting the Alarm Input/Output
The Alarm In/Out port at the back is composed of the following.
SRN-473S
•
• ALARM IN 1 ~ 2 : Alarm Input Port
•
• ALARM OUT 1 : Alarm Output Port
VIE
WE
R
1
2
3
4
PoE
CAM
ERA
HD
MI
VG
A OU
T
Sensors
Alarm
N.O C N.C
1 2 G
1
ALARM OUT
(30VDC 2A,
125VAC 0.5A MAX)
ALARM IN
(5mA sink)
Page: 28
English _29
●
connecting
with
other
device
SRN-873S
•
• ALARM IN 1 ~ 4 : Alarm Input Port
•
• ALARM OUT 1 ~ 3 : Alarm Output Port
G
1 2 3
1
2
3
4
NC
NO
NO
NO
COM
COM
COM
ALA
RM
OUT
ALA
RM
IN
VG
A OU
T
HD
MI
CO
NSO
LE
VIE
WE
R
eSA
TA
PoE
CAM
ERA
1
2
3
4
5
6
7
8
Sensors
Alarm
N.O C N.C N.O C N.O C G
1 2 3 4 G
1 2 3
ALARM OUT
(30VDC 2A,
125VAC 0.5A MAX)
ALARM IN
(5mA sink)
Page: 29
30_ connecting with other device
connecting with other device
SRN-1673S
•
• ALARM IN 1 ~ 8 : Alarm Input Port
•
• ALARM RESET : On receiving an Alarm Reset signal, the system cancels the current Alarm Input and
resumes sensing.
•
• ALARM OUT 1 ~ 4 : Alarm Output Port
HDMI
eSA
TA
VGA
OUT
AUD
IO OUT
USB
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
1 2 3 4 5 6 7 8
NO
COM
COM
COM
COM
NC NO
NO
NO
1
2
3
4
ALARM IN
PoE
ALARM OU
T
G
G
ALA
RM
RES
ET
CONSO
LE
VIEWER
CAMERA
SWITCH
Sensors
Alarm
ALARM OUT
(30VDC 2A, 125VAC 0.5A MAX)
ALARM IN
(5mA sink)
N.O C N.C N.O C N.O C N.O C G
1 2 3 4 5 6 7 8 A.R G
Page: 30
English _31
●
connecting
with
other
device
Connecting the Network
M
M `
` For more information about network connection, refer to "Network Configuration". (Page 97)
`
` The following figures are based on Model SRN-1673S.
Network connection via Ethernet (10/100/1000BaseT)
Network connection via router
HDM
I
eSA
TA
VGA
OUT
AUD
IO OUT
USB
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
1 2 3 4 5 6 7 8
NO
COM
COM
COM
COM
NC NO
NO
NO
1
2
3
4
ALARM IN
PoE
ALARM OU
T
G
G
ALA
RM
RES
ET
CON
SOL
E
VIEWER
CAMERA
SWITCH
Windows
Network Viewer
Switch
HDM
I
eSA
TA
VGA
OUT
AUD
IO OUT
USB
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
1 2 3 4 5 6 7 8
NO
COM
COM
COM
COM
NC NO
NO
NO
1
2
3
4
ALARM IN
PoE
ALARM OU
T
G
G
ALA
RM
RES
ET
CON
SOL
E
VIEWER
CAMERA
SWITCH
NETWORK
DDNS Server
(Data Center)
Windows
Network Viewer
xDSL or
Cable Modem
xDSL or
Cable Modem
Brodband router
Page: 31
32_ connecting with other device
connecting with other device
Connecting to Internet through PPPoE
Connecting the network camera
PnP mode
HDM
I
eSA
TA
VGA
OUT
AUD
IO OUT
USB
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
1 2 3 4 5 6 7 8
NO
COM
COM
COM
COM
NC NO
NO
NO
1
2
3
4
ALARM IN
PoE
ALARM OU
T
G
G
ALA
RM
RES
ET
CON
SOL
E
VIEWER
CAMERA
SWITCH
Switch
Windows
Network Viewer
NETWORK
PPPoE MODEM
Switch
Phone(PPPoE)
Line
Network Camera
Network Camera
HDM
I
eSA
TA
VGA
OUT
AUD
IO OUT
USB
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
1 2 3 4 5 6 7 8
NO
COM
COM
COM
COM
NC NO
NO
NO
1
2
3
4
ALARM IN
PoE
ALARM OU
T
G
G
ALA
RM
RES
ET
CON
SOL
E
VIEWER
CAMERA
SWITCH
Network Camera
ex) IP : 192.168.231.10
ex) IP : 192.168.231.100
Page: 32
English _33
●
connecting
with
other
device
Manual mode
HDM
I
eSA
TA
VGA
OUT
AUD
IO OUT
USB
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
1 2 3 4 5 6 7 8
NO
COM
COM
COM
COM
NC NO
NO
NO
1
2
3
4
ALARM IN
PoE
ALARM OU
T
G
G
ALA
RM
RES
ET
CON
SOL
E
VIEWER
CAMERA
SWITCH
Switch
Switch
Network Camera
Network Camera
ex) IP : 192.168.1.20
Network Camera
ex) IP : 192.168.1.10
Network Camera
Network Camera
Network Camera
ex) IP : 192.168.1.100
Page: 33
34_ live
Getting Started
Starting the system
1.	 Connect the power cable of the NVR to the wall outlet.
2.	 You will see the initialization screen.
The initialization process will last about 2 minute.
If a new HDD is installed, the initialization process may take
longer.
3.	 The live screen appears with a beep.
live
Page: 34
English _35
●
live
Install Wizard
As shown below, proceed through each step of the <Install Wizard>.
1.	 In the <Language> screen, select the language and press
the <Next> button.
2.	 In the <ID/PW> screen, set the password and press
<Next>.
M
M `
` If you click < >, a basic guide for password setup is
displayed.
3.	 In the <Network> screen, set the network access method
and the access environment. To use a simple intranet, click
<Next>.
•
• Network 1 (Camera) : Connects to the camera and receives the video feed from the camera
•
• Network 2 (Viewer) : This is a port for transmitting an image to the webviewer.
•
• Network 1 / Network 2 Setup
-
- IP Type : Choose the network connection method.
-
- IP Address, Subnet Mask, Gateway, DNS
M
M `
` If the LAN cable is not connected to the port, the setting button will not be activated for use. Check the LAN cable
connection.
`
` The built-in DHCP Server in NVR will turn on automatically at stage 3.At this stage, using the existing DHCP server in the
same network may cause a problem, as two DHCP servers would be simultaneously operating.
`
` For more details on network settings, refer to the user manual.
4.	 After setting the date/time settings in the <Date/Time>
screen, click on the <Finish> button to launch the setting
completion window.
5.	 In the setting completion window, click on the <OK> button
to finish camera setting and launch the camera registration
screen.
Page: 35
36_ live
live
6.	 If there are 16 or less cameras searched, it will be automatically registered and the camera information(fps,
days of recording) will be displayed.
•	If there are 16 or less cameras searched
•	If there are more than 16 cameras searched
Select a camera to register and click the <Register> button. Once camera registration is finished, proceed in
the same steps as after auto registration.
1.	 The searched camera will be automatically
registered and the initial recording value
will be displayed.
2.	 In the camera registration window, click the
<Cancel> button to modify the recording
settings automatically set.
After selecting a camera, press the register button.
Camera Register
Cameras searched Refresh
Status
|
	 Model
|
	 IP
|
	 MAC
|
	 Network
|
	
Connected	 Authentication errors	 Disconnected
Exit
Register
0/16
Page: 36
English _37
●
live
Shutting Down the System
1.	 Press the [POWER] button for your remote controller or
select <Shutdown> in the live screen menu.
2.	 The “Shutdown” confirmation pop-up window will appear.
3.	 Using the directional button on your remote control, select
<OK> and press the [ENTER] button or click on <OK>.
The system will shut down.
M
M `
` Only the user with the "shutdown" permission can shut down
the system.
`
` For the permission management, refer to "User > Setting Permissions". (Page 63)
Login
If you want to use the NVR menu, you need to login as a user with the privileges to access it.
1.	 In the live mode screen, right click the mouse button or
press the [MENU] button on your remote control.
You will see the context menu on the screen as shown.
2.	 Select <Login>.
The login dialog appears.
J
J `
` Even if you press the menu button that requires a login with the
remote control, the login screen will appear.
`
` The first administator ID is "admin" and the password must be set
in the Installation Wizard.
`
` Set password for your wireless network if you use the product with
a wireless router. Being not protected with password or using the
default wireless router password may expose your video data to potential threat.
`
` Please change your password every three months to safely protect personal information and to prevent the damage of the
information theft.
Please, take note that it’s a user’s responsibility for the security and any other problems caused by mismanaging a password.
M
M `
` To change access privileges, refer to "User > Setting Permissions". (Page 63)
Scene Mode	 ►
CH Info
Live Status
Audio Off
Freeze
Stop Alarm
Record
Keep full scr ratio
Play
Search
Backup
Menu
Quick Setup	 ►
Shutdown
Hide Launcher
Login
Page: 37
38_ live
live
Live Screen Configuration
Icons on the Live Screen
You can check the status or operation of the NVR with the icons on the live screen.
Name Description
a Current Date,Time Displays the current time and date.
b Login Information When you are logged in, the "LOG ON" icon will be displayed.
c Screen Mode
FULL NO RAID
RAID SCSI
It is displayed when there is ongoing backup in the live condition.
FULL NO RAID
RAID SCSI
If access to the recording canceling menu is restricted, then it is only displayed when
there is ongoing manual recording.
`
` Only a user with the right to cancel recording can do so.
FULL NO RAID
RAID SCSI
It is displayed when the magnifying function is in operation.
FULL NO RAID
RAID SCSI
This icon is displayed when you press the Freeze button.
FULL NO RAID
RAID SCSI
It is displayed when all the channels are switched at the set time interval.
d System
Operation
FULL NO RAID
RAID SCSI
It is displayed when there is a problem with the fan.
FULL NO RAID
RAID SCSI
It is displayed when the recording data cannot be received properly due to a device
problem.
FULL NO RAID
RAID SCSI
Displayed if the HDD is full and the NVR has an insufficient space to record.
FULL NO RAID
RAID SCSI
Displayed if no HDD is installed or the existing HDD should be replaced.
FULL NO RAID
RAID SCSI
Displayed if the HDD needs a technical examination.
CAM 01
2015-01-01 00:00:01
FULL NO
FULL NO RAID
RAID SCSI
FULL NO RAID
RAID SCSI
FULL NO RAID
RAID SCSI
Page: 38
English _39
●
live
Name Description
d System
Operation
FULL NO RAID
RAID SCSI
It is displayed when the max permitted amount of data for each channel is exceeded.
ULL NO RAID
RAID SCSI
It is displayed when the network is overloaded.
`
` It occurs when the max receiving allowance is exceeded, causing an overload to the
CPU. It will disappear if you modify the camera settings or delete a camera to reduce
the performance burden.
NO RAID
RAID SCSI It is displayed when there is firmware to update the server.
e Video Input
Status
Displayed if no input is entered in the condition that the camera is set to <ON>.
HD
Displayed if no permission to live view is granted.
If a camera is <OFF>, or if no camera is registered, or it is in <Covert2> mode, nothing
will be displayed on the screen.
If the camera is set to <Covert1>, the video will be displayed but the OSD menus will not
be displayed.
f Camera Title / Channel Display the camera title and channel number.
g Camera
Operation
FULL NO RAID
RAID SCSI
This icon is displayed for a channel that a PTZ-featuring camera is connected to.
FULL NO RAID
RAID SCSI
Displays AUDIO ON/MUTE. Not displayed in video mode if deactivated.
FULL NO RAID
RAID SCSI
If the sensor is set to <ON>, the input signal will be displayed on the screen of the
connected channel.
FULL NO RAID
RAID SCSI
This icon is displayed when Motion Detection is set to <ON> and a camera motion or
camera event occurs.
It displays the status of general/event/scheduled recording.
FULL NO RAID
RAID SCSI
It is displayed when it fails to decode all the frames due to limited decoding performance
and in this case only the I-Frame is decoded.
FULL NO RAID
RAID SCSI
This is displayed when a POS (text) event occurs.
Page: 39
40_ live
live
Error Information
•
• If the built-in HDD is not connected, the “NO HDD” icon ( ) will be displayed in the top left corner. In this
case, make sure you contact the service center for assistance as this may cause a failure of recording,
playback or backup.
•
• If the cooling fan does not work properly or has a problem, the <Fan Information> window will appear and
the fan error icon ( ) will be displayed on the top left corner.
In this case, check to see if the internal fan works.
As a fan error can shorten the product life, make sure you contact the service center for assistance.
M
M `
` If you see the fan error icon or NO HDD, HDD FAIL icons on the screen, contact the service center for more details.
Live Screen Menu
Beside the functional buttons for your remote control, in the live screen mode, you can right click with the
mouse button or press the [MENU] button on your remote control to launch the live screen menu from where
you can access each menu from.
The context menu differs depending on the state of Log in/out, split mode, and NVR operation status.
M
M `
` Live view, backup, recording, stopping recording, search, PTZ, remote alarlm output, and termination menus can be
restricted in use depending on user privilege settings.
< Single Mode Menu >
Scene Mode	 ►
CH Info
Live Status
Record Status
PoE Status
Layout 	 ►	
PTZ Control
ZOOM
Audio	►
Freeze
Stop Alarm
Capture
Record
Keep ch. scr ratio
Play
Search
Backup
Menu
Quick Setup	 ►
Shutdown
Hide Launcher
Logout
< Split Mode Menu >
Scene Mode	 ►
CH Info
Live Status
Record Status
PoE Status
Layout	 ►	
Audio Off
Freeze
Stop Alarm
Record
Keep full scr ratio
Play
Search
Backup
Menu
Quick Setup	 ►
Shutdown
Hide Launcher
Logout
Page: 40
English _41
●
live
Single Mode Menu
The single mode menu is available only in Single Mode.
If the menu is displayed as <Screen Mode> in the single screen, it is displayed as a <Full Screen> in the
menu where only one channel is selected in the split screen.
Menu Description
a Full Screen
Select and click a desired channel in Split mode to switch to the full screen of the selected
channel.
b PTZ Control
Accesses the PTZ Control menu.The PTZ menu will be active on the Live screen after you
select a single channel. (Page 56)
c ZOOM You can enlarge the selected screen. (Page 49)
d Capture Captures the screen of the selected channel.
< Single Mode Menu >
Scene Mode	 ►
CH Info
Live Status
Record Status
PoE Status
Layout 	 ►	
PTZ Control
ZOOM
Audio	►
Freeze
Stop Alarm
Capture
Record
Keep ch. scr ratio
Play
Search
Backup
Menu
Quick Setup	 ►
Shutdown
Hide Launcher
Logout
< One channel selection menu in the split screen >
Full Screen
CH Info
Live Status
Record Status
PoE Status
Layout	►	
PTZ Control
ZOOM
Audio	►
Freeze
Stop Alarm
Capture
Record
Keep ch. scr ratio
Play
Search
Backup
Menu
Quick Setup	 ►
Shutdown
Hide Launcher
Logout
a
b
c
d
Page: 41
42_ live
live
Split Mode Menu
In Live split mode, right-click to display this context menu as shown.
The context sensitive menu in split mode differs, depending on the login/logout status.
Menu Description
a Screen Mode
Select a screen mode for the Live screen.
Refer to “Live screen mode”. (Page 45)
b CH Info
It displays the camera connection information for each channel.
Refer to the “Channel Information”. (Page 47)
c Live Status
Shows the live status of connected camera to each channel.
Refer to “Live Status”. (Page 48)
d Record Status
Shows the record status of each channel.
Refer to “Record Status”. (Page 48)
e PoE Status
Set the PoE status in each channel.
Refer to the “PoE Status”. (Page 50)
f Layout
Set the layout of each channel.
Refer to “Layout”. (Page 51)
g Audio On/Off
Turns ON/MUTE the sound of the selected channel.
Refer to “Audio ON/OFF”. (Page 52)
h Freeze Stop playing the video temporarily. Refer to “Freeze”. (Page 52)
i Stop Alarm
Stop the alarm output, deactivate the event icon and release the auto sequencing.
Refer to "Event Monitoring". (Page 53)
Scene Mode	 ►
CH Info
Live Status
Record Status
PoE Status
Layout	 ►	
Audio Off
Freeze
Stop Alarm
Record
Keep full scr ratio
Play
Search
Backup
Menu
Quick Setup	 ►
Shutdown
Hide Launcher
Logout
c
b
a
d
m
s
n
o
l
q
r
k
p
j
i
h
g
f
e
Page: 42
English _43
●
live
Menu Description
j Record/Stop Starts/stops the standard recording.
k Keep full scr ratio/
Keep ch. scr ratio
Channel screen ratio is changed.
Refer to "Maintain the Screen Ratio". (Page 54)
l Play Refer to "Search & Play > Play". (Page 113)
m Search Refer to "Search & Play > Search". (Page 109)
n Backup
Searches for a backup device and runs backup for each channel or schedule backup later at a
more preferable time.
o Menu Enter the main menu. Refer to the menu settings. (Page 59)
p Quick Setup The “Camera Register” & “Recording Setup” screen will immediately appear.
q Shutdown The system shutdown dialog will appear.
r Show/Hide Launcher Shows or hides the launcher. Refer to "View the Launcher Menu". (Page 44)
s Login/Logout You can log in or out.
Page: 43
44_ live
live
View the Launcher Menu
The Launcher menu appears on the bottom of the live screen.
1.	 Select <Show Launcher> in the context menu of the Live
screen.
2.	 Move the cursor to the bottom and click a desired item in
the Launcher menu.
M
M `
` If no input is entered for 10 seconds, the menu will disappear.
`
` The Launcher menu can be accessed only by using the mouse.
`
` SRN-473S only supports full screen, 4-split screen, and automatic
switchover screen.
`
` SRN-873S does not support 13/16-split screen.
Menu Description
a Layout Select the layout to be displayed on the screen.
b Layout Setup You can set, change or delete the new layout of each channel.
c Screen Mode
Displays a list of split modes available in a bar type.
The current screen mode will be displayed grey.
d Menu Expansion
Button
Click to display the hidden menu to the right.
e Backup
Searches for a backup device and runs backup of each channel or schedule it for later at a more
desirable time.
f Zoom Enlarges the selected area.This is available only in Single Live mode.
g PTZ
If the network camera connected to the selected channel supports the PTZ operations, this will run
the PTZ control launcher.This is active only in Live single mode.
h Alarm Stops the alarm if it's activated.
i Freeze Freezes the Live screen temporarily.
j Capture Captures the screen of the selected channel.
k Text Text output is ON or OFF.
l Play Enters Play mode if a file to play exist, and if not, enters Search mode.
m Record Start/End recording the Live screen.
a c d
b ef ghijklm
Page: 44
English _45
●
live
Live Screen Mode
16 live videos are displayed in a single screen, 6 kinds of split screens, and an automatic switchover screen.
Method for displaying screen mode
If you want to change the split mode, select a screen mode suggested in the launcher menu or right click with
the mouse button and select a split mode in the screen mode menu.
Press the [MODE] button on your remote controller to change it in the order suggested in the launcher menu.
M
M `
` SRN-473S only supports full screen, 4-split screen, and automatic switchover screen.
`
` SRN-873S does not support 13/16-split screens.
Auto screen switching
SRN-1673S can display 16 live videos sequentially in full screen, 4-split screen, and 9-split screen.
M
M `
` In a split mode, If you have set <Sequence switching time> in "Device > Monitor",Auto Sequence will be conducted at
the set interval. (Page 85)
`
` When a channel is changed, a video may be displayed delayed due to the network environment.
16-split mode 9-split mode 4-split mode 6-split mode
CH7 CH8
CH4
CH3
CH2
CH5
CH1
CH6 CH1
CH1 CH2
CH3 CH4
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9
CH15
CH11
CH16
CH12
CH7
CH3
CH8
CH4
CH13
CH9
CH14
CH10
CH5
CH1
CH6
CH2
CH12
CH1
CH13
CH19
CH4
CH7
CH5
CH10
CH8
CH11
CH6
CH2 CH3
CH1
CH1 CH3
CH2
CH4 CH5 CH6
8-split mode 13-split mode Auto Sequence Single mode
CH7 CH8
CH4
CH3
CH2
CH5
CH1
CH6 CH1
CH1 CH2
CH3 CH4
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9
CH15
CH11
CH16
CH12
CH7
CH3
CH8
CH4
CH13
CH9
CH14
CH10
CH5
CH1
CH6
CH2
CH12
CH1
CH13
CH19
CH4
CH7
CH5
CH10
CH8
CH11
CH6
CH2 CH3
CH1
CH1 CH3
CH2
CH4 CH5 CH6
16
CH1 CH2
CH3 CH4
CH1
CH12
CH1
CH13
CH19
CH4
CH7
CH5
0 CH11
CH3
CH5
CH2
CH6
CH3
CH8 CH9
CH1 CH2
CH3 CH4
CH9 CH10 CH13 CH14
CH5
CH2
CH6
CH3
CH8 CH9
CH1 CH3
CH2
CH4 CH5 CH6
CH1
CH2
1
Single mode
CH1 CH2
CH3 CH4
CH1
CH12
CH1
CH13
CH19
CH4
CH7
CH5
CH11
CH3
CH5
CH2
CH6
CH3
CH8 CH9
CH1 CH2
CH3 CH4
CH9 CH10 CH13 CH14
CH5
CH2
CH6
CH3
CH8 CH9
CH1 CH3
CH2
CH4 CH5 CH6
CH1
CH2
CH1 CH2
CH3 CH4
CH1
CH12
CH1
CH13
CH19
CH4
CH7
CH5
CH11
CH3
CH5
CH2
CH6
CH3
CH8 CH9
CH1 CH2
CH3 CH4
CH9 CH10 CH13 CH14
CH5
CH2
CH6
CH3
CH8 CH9
CH1 CH3
CH2
CH4 CH5 CH6
CH1
CH2
CH1 CH2
CH3 CH4
CH1
CH12
CH1
CH13
CH19
CH4
CH7
CH5
CH11
CH3
CH5
CH2
CH6
CH3
CH8 CH9
CH1 CH2
CH3 CH4
CH9 CH10 CH13 CH14
CH5
CH2
CH6
CH3
CH8 CH9
CH1 CH3
CH2
CH4 CH5 CH6
CH1
CH2
CH1 CH2
CH3 CH4
CH1
CH12
CH1
CH13
CH19
CH4
CH7
CH5
H11
H3
CH5
CH2
CH6
CH3
CH8 CH9
CH1 CH2
CH3 CH4
CH9 CH10 CH13 CH14
CH5
CH2
CH6
CH3
CH8 CH9
CH1 CH3
CH2
CH4 CH5 CH6
CH1
CH2
CH1 CH2
CH3 CH4
CH1
CH12
CH1
CH13
CH19
CH4
CH7
CH5
1
CH5
CH2
CH6
CH3
CH8 CH9
CH1 CH2
CH3 CH4
CH5
CH2
CH6
CH3
CH8 CH9
CH1 CH3
CH2
CH4 CH5 CH6
CH1
CH2
CH1 CH2
CH3 CH4
CH1
CH12
CH1
CH13
CH19
CH4
CH7
CH5
H5
H2
CH6
CH3
8 CH9
CH1 CH2
CH3 CH4
CH5
CH2
CH6
CH3
CH8 CH9
CH1 CH3
CH2
CH4 CH5 CH6
CH1
CH2
CH1 CH2
CH3 CH4
CH1
CH12
CH1
CH13
CH19
CH4
CH7
CH5
CH6
CH3
CH9
CH1 CH2
CH3 CH4
5
2
CH6
CH3
8 CH9
CH1 CH3
CH2
CH4 CH5 CH6
CH1
CH2
CH1 CH2
CH3 CH4
CH1
CH12
CH1
CH13
CH19
CH4
CH7
CH5
CH6
CH3
CH9
CH1 CH2
CH3 CH4
CH6
CH3
CH9
CH1 CH3
CH2
CH4 CH5 CH6
CH1
CH2
CH1 CH2
CH3 CH4
CH1
H12
H1
CH13
CH19
H4
CH7
CH5
CH6
CH3
CH9
CH1 CH2
CH3 CH4
CH6
CH3
CH9
CH1 CH3
CH2
CH4 CH5 CH6
CH1
CH2
CH1 CH2
CH3 CH4
CH1
2 CH13
CH19
CH7
CH5
CH6
CH3
CH9
CH1 CH2
CH3 CH4
CH6
CH3
CH9
CH1 CH3
CH2
CH4 CH5 CH6
CH1
CH2
CH1 CH2
CH3 CH4
CH1
CH13
CH19
CH7
CH5
CH6
CH3
CH9
CH1 CH2
CH3 CH4
CH6
CH3
CH9
CH1 CH3
CH2
CH4 CH5 CH6
CH1
CH2
CH1 CH2
CH3 CH4
CH1
CH13
CH19
CH7
CH5
CH6
CH3
CH9
CH1 CH2
CH3 CH4
CH6
CH3
CH9
CH1 CH3
CH2
CH4 CH5 CH6
CH1
CH2
CH1 CH2
CH3 CH4
CH1
CH13
CH19
CH7
CH5
6
3
9
CH1 CH2
CH3 CH4
CH6
CH3
CH9
CH1 CH3
CH2
CH4 CH5 CH6
CH1
CH2
CH1 CH2
CH3 CH4
CH1
H13
H19
H7
H5
CH1 CH2
CH3 CH4
H6
H3
H9
CH1 CH3
CH2
CH4 CH5 CH6
CH1
CH2
CH1 CH2
CH3 CH4
CH1
3
9
CH1 CH2
CH3 CH4
CH1 CH3
CH2
CH4 CH5 CH6
CH1
CH2
CH1 CH2
CH3 CH4
CH1
CH1 CH2
CH3 CH4
CH1 CH3
CH2
CH4 CH5 CH6
CH1
CH2
CH1 CH2
CH3 CH4
CH1
CH1
CH7 CH8
CH4
CH3
CH2
CH5
CH1
CH6 CH12
CH1
CH13
CH19
CH4
CH7
CH5
CH10
CH8
CH11
CH6
CH2 CH3
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9
CH1 CH2
CH3 CH4
CH5 CH6
CH7 CH8
CH9 CH10
CH11 CH12
CH13 CH14
CH15 CH16
CH1
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9
CH13 CH14
CH11
CH15
CH10 CH12
CH16
CH1 CH3
CH2
CH4 CH5 CH6
CH1
CH2
CH1 CH2
CH3 CH1
CH15
CH11
CH16
CH12
CH7
CH3
CH8
CH4
CH13
CH9
CH14
CH10
CH5
CH1
CH6
CH2
CH15
CH11
CH16
CH12
CH7
CH3
CH8
CH4
CH13
CH9
CH14
CH10
CH5
CH1
CH6
CH2
13-16
9-12
5-8
1-4
4-split mode
CH1 CH2
CH3 CH4
CH1
CH1
CH7 CH8
CH4
CH3
CH2
CH5
CH1
CH6 CH12
CH1
CH13
CH19
CH4
CH7
CH5
CH10
CH8
CH11
CH6
CH2 CH3
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9
CH1 CH2
CH3 CH4
CH5 CH6
CH7 CH8
CH9 CH10
CH11 CH12
CH13 CH14
CH15 CH16
CH1
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9
CH13 CH14
CH11
CH15
CH10 CH12
CH16
CH1 CH3
CH2
CH4 CH5 CH6
CH1
CH2
CH1 CH2
CH11 CH12
CH7
CH3
CH8
CH4
CH9 CH10
CH5
CH1
CH6
CH2
CH15
CH11
CH16
CH12
CH7
CH3
CH8
CH4
CH13
CH9
CH14
CH10
CH5
CH1
CH6
CH2
CH1 CH2
CH3 CH4
CH1
CH1
CH7 CH8
CH4
CH3
CH2
CH5
CH1
CH6 CH12
CH1
CH13
CH19
CH4
CH7
CH5
CH10
CH8
CH11
CH6
CH2 CH3
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9
CH1 CH2
CH3 CH4
CH5 CH6
CH7 CH8
CH9 CH10
CH11 CH12
CH13 CH14
CH15 CH16
CH1
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9
CH13 CH14
CH11
CH15
CH10 CH12
CH16
CH1 CH3
CH2
CH4 CH5 CH6
CH1
CH2
CH1 CH2
CH7
CH3
CH8
CH4
CH5
CH1
CH6
CH2
CH15
CH11
CH16
CH12
CH7
CH3
CH8
CH4
CH13
CH9
CH14
CH10
CH5
CH1
CH6
CH2
CH1 CH2
CH3 CH4
CH1
CH1
CH7 CH8
CH4
CH3
CH2
CH5
CH1
CH6 CH12
CH1
CH13
CH19
CH4
CH7
CH5
CH10
CH8
CH11
CH6
CH2 CH3
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9
CH1 CH2
CH3 CH4
CH5 CH6
CH7 CH8
CH9 CH10
CH11 CH12
CH13 CH14
CH15 CH16
CH1
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9
CH13 CH14
CH11
CH15
CH10 CH12
CH16
CH1 CH3
CH2
CH4 CH5 CH6
CH1
CH2
CH3 CH4
CH1 CH2
CH15
CH11
CH16
CH12
CH7
CH3
CH8
CH4
CH13
CH9
CH14
CH10
CH5
CH1
CH6
CH2
CH1
CH2
CH2
CH3
H2
H4 CH4 CH5 CH6
CH1
H2
H4
CH13 CH14
CH15 CH16
CH1 CH2
CH1 CH2
CH3 CH4
CH1
CH1
CH7 CH8
CH4
CH3
CH2
CH5
CH1
CH6 CH12
CH1
CH13
CH19
CH4
CH7
CH5
CH10
CH8
CH11
CH6
CH2 CH3
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9
CH1 CH2
CH3 CH4
CH5 CH6
CH7 CH8
CH9 CH10
CH11 CH12
CH13 CH14
CH15 CH16
CH1
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9
CH13 CH14
CH11
CH15
CH10 CH12
CH16
CH1
CH4
CH1
CH2
CH7
CH3
CH8
CH4
CH5
CH1
CH6
CH2
CH15
CH11
CH16
CH12
CH7
CH3
CH8
CH4
CH13
CH9
CH14
CH10
CH5
CH1
CH6
CH2
10-16
1-9
9-split mode
CH1
CH2
CH3
CH4 CH5 CH6
CH1
CH14
CH16
CH1 CH2
CH3 CH4
CH1
CH1
CH7 CH8
CH4
CH3
CH2
CH5
CH1
CH6 CH12
CH1
CH13
CH19
CH4
CH7
CH5
CH10
CH8
CH11
CH6
CH2 CH3
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9
CH1 CH2
CH3 CH4
CH5 CH6
CH7 CH8
CH9 CH10
CH11 CH12
CH13 CH14
CH15 CH16
CH1
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9
CH13 CH14
CH11
CH15
CH10 CH12
CH16
CH1
CH4 CH5
CH1
CH2
CH3 CH4
CH1 CH2
CH15
CH11
CH16
CH12
CH7
CH3
CH8
CH4
CH13
CH9
CH14
CH10
CH5
CH1
CH6
CH2
Page: 45
46_ live
live
Manually change the screen
Press the left/right button on the front panel or the remote control, or click the arrow <_/+> key to move to
the next split mode.
•	If pressing the right [+] button in 9-split mode :
9-split (CH 1~9) mode  9-split (CH 10~16) mode  Auto Sequence
•	If pressing the right [+] button in 4-split mode :
Channel (CH 1~4)  Channel (CH 5~8)  Channel (CH 9~12)  Channel (CH 13~16)  Auto Sequence
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9
CH1 CH2
CH3 CH4
CH7 CH8 CH9 CH10 CH11 CH12 CH13 CH14 CH15 CH16
CH12 CH13
CH10 CH11
CH1
CH2
CH1
CH1 CH2
CH1
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9
CH13 CH14
CH11
CH15
CH10 CH12
CH16
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9
CH1 CH2
CH3 CH4
CH1 CH2
CH3 CH4
CH5 CH6
CH7 CH8
CH9 CH10
CH11 CH12
CH13 CH14
CH15 CH16
CH15
CH11
CH16
CH12
CH7
CH3
CH8
CH4
CH13
CH9
CH14
CH10
CH5
CH1
CH6
CH2
CH15
CH11
CH16
CH12
CH1
CH3
CH8
CH4
CH13
CH9
CH14
CH10
CH5
CH7
CH6
CH2
CH3
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9
CH1 CH2
CH3 CH4
CH7 CH8 CH9 CH10 CH11 CH12 CH13 CH14 CH15 CH16
CH12 CH13
CH10 CH11
CH1
CH2
CH1
CH1 CH2
CH1
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9
CH13 CH14
CH11
CH15
CH10 CH12
CH16
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9
CH1 CH2
CH3 CH4
CH1 CH2
CH3 CH4
CH5 CH6
CH7 CH8
CH9 CH10
CH11 CH12
CH13 CH14
CH15 CH16
CH15
CH11
CH16
CH12
CH7
CH3
CH8
CH4
CH13
CH9
CH14
CH10
CH5
CH1
CH6
CH2
CH15
CH11
CH16
CH12
CH1
CH3
CH8
CH4
CH13
CH9
CH14
CH10
CH5
CH7
CH6
CH2
CH3
; ;
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9
CH1 CH2
CH3 CH4
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9 CH10 CH11 CH12 CH13 CH14 CH15 CH16
CH12
CH1
CH13
CH9
CH4
CH7
CH5
CH10
CH8
CH11
CH6
CH2 CH3
CH1
CH2
CH1
CH1 CH2
CH1
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9
CH13 CH14
CH11
CH15
CH10 CH12
CH16
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9
CH1 CH2
CH3 CH4
CH1 CH2
CH3 CH4
CH5 CH6
CH7 CH8
CH9 CH10
CH11 CH12
CH13 CH14
CH15 CH16
CH15
CH11
CH16
CH12
CH7
CH3
CH8
CH4
CH13
CH9
CH14
CH10
CH5
CH1
CH6
CH2
CH15
CH11
CH16
CH12
CH1
CH3
CH8
CH4
CH13
CH9
CH14
CH10
CH5
CH7
CH6
CH2
CH3
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9
CH1 CH2
CH3 CH4
CH3 CH4 CH6 CH7
CH4 CH5
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9 CH10 CH11 CH12 CH13 CH14 CH15 CH16
CH12
CH1
CH13
CH9
CH4
CH7
CH5
CH10
CH8
CH11
CH6
CH2 CH3
CH1
CH2
CH1
CH1 CH2
CH1
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9
CH13 CH14
CH11
CH15
CH10 CH12
CH16
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9
CH1 CH2
CH3 CH4
CH1 CH2
CH3 CH4
CH5 CH6
CH7 CH8
CH9 CH10
CH11 CH12
CH13 CH14
CH15 CH16
CH15
CH11
CH16
CH12
CH7
CH3
CH8
CH4
CH13
CH9
CH14
CH10
CH5
CH1
CH6
CH2
CH15
CH11
CH16
CH12
CH1
CH3
CH8
CH4
CH13
CH9
CH14
CH10
CH5
CH7
CH6
CH2
CH3
10-16
1-9
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9
CH1 CH2
CH3 CH4
CH3 CH4 CH6 CH7
CH4 CH5
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9 CH10 CH11 CH12 CH13 CH14 CH15 CH16
CH12
CH1
CH13
CH9
CH4
CH7
CH5
CH10
CH8
CH11
CH6
CH2 CH3
CH1
CH2
CH1
CH1 CH2
CH1
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9
CH13 CH14
CH11
CH15
CH10 CH12
CH16
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9
CH1 CH2
CH3 CH4
CH1 CH2
CH3 CH4
CH5 CH6
CH7 CH8
CH9 CH10
CH11 CH12
CH13 CH14
CH15 CH16
CH15
CH11
CH16
CH12
CH7
CH3
CH8
CH4
CH13
CH9
CH14
CH10
CH5
CH1
CH6
CH2
CH15
CH11
CH16
CH12
CH1
CH3
CH8
CH4
CH13
CH9
CH14
CH10
CH5
CH7
CH6
CH2
CH3
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9
CH1 CH2
CH3 CH4
CH3 CH4 CH6 CH7
CH4 CH5
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9 CH10 CH11 CH12 CH13 CH14 CH15 CH16
CH12
CH1
CH13
CH9
CH4
CH7
CH5
CH10
CH8
CH11
CH6
CH2 CH3
CH1
CH2
CH1
CH1 CH2
CH1
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9
CH13 CH14
CH11
CH15
CH10 CH12
CH16
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9
CH1 CH2
CH3 CH4
CH1 CH2
CH3 CH4
CH5 CH6
CH7 CH8
CH9 CH10
CH11 CH12
CH13 CH14
CH15 CH16
CH15
CH11
CH16
CH12
CH7
CH3
CH8
CH4
CH13
CH9
CH14
CH10
CH5
CH1
CH6
CH2
CH15
CH11
CH16
CH12
CH1
CH3
CH8
CH4
CH13
CH9
CH14
CH10
CH5
CH7
CH6
CH2
CH3
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9
CH1 CH2
CH3 CH4
CH3 CH4 CH6 CH7
CH4 CH5
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9 CH10 CH11 CH12 CH13 CH14 CH15 CH16
CH12
CH1
CH13
CH9
CH4
CH7
CH5
CH10
CH8
CH11
CH6
CH2 CH3
CH1
CH2
CH1
CH1 CH2
CH1
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9
CH13 CH14
CH11
CH15
CH10 CH12
CH16
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9
CH1 CH2
CH3 CH4
CH1 CH2
CH3 CH4
CH5 CH6
CH7 CH8
CH9 CH10
CH11 CH12
CH13 CH14
CH15 CH16
CH15
CH11
CH16
CH12
CH7
CH3
CH8
CH4
CH13
CH9
CH14
CH10
CH5
CH1
CH6
CH2
CH15
CH11
CH16
CH12
CH1
CH3
CH8
CH4
CH13
CH9
CH14
CH10
CH5
CH7
CH6
CH2
CH3
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9
CH1 CH2
CH3 CH4
CH3 CH4 CH6 CH7
CH4 CH5
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9 CH10 CH11 CH12 CH13 CH14 CH15 CH16
CH12
CH1
CH13
CH9
CH4
CH7
CH5
CH10
CH8
CH11
CH6
CH2 CH3
CH1
CH2
CH1
CH1 CH2
CH1
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9
CH13 CH14
CH11
CH15
CH10 CH12
CH16
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9
CH1 CH2
CH3 CH4
CH1 CH2
CH3 CH4
CH5 CH6
CH7 CH8
CH9 CH10
CH11 CH12
CH13 CH14
CH15 CH16
CH15
CH11
CH16
CH12
CH7
CH3
CH8
CH4
CH13
CH9
CH14
CH10
CH5
CH1
CH6
CH2
CH15
CH11
CH16
CH12
CH1
CH3
CH8
CH4
CH13
CH9
CH14
CH10
CH5
CH7
CH6
CH2
CH3
; ; ;
13-16
9-12
5-8
1-4
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9
CH1 CH2
CH3 CH4
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9
CH15
CH11
CH16
CH12
CH7
CH3
CH8
CH4
CH13
CH9
CH14
CH10
CH5
CH1
CH6
CH2
CH1 CH2
CH3 CH4 CH6 CH7
CH3
CH2
CH4
CH1
CH5
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9 CH10 CH11 CH12 CH13 CH14 CH15 CH16
CH12
CH1
CH13
CH9
CH4
CH7
CH5
CH10
CH8
CH11
CH6
CH2 CH3
CH1
CH2
CH1
CH1 CH2
CH1
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9
CH13 CH14
CH11
CH15
CH10 CH12
CH16
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9
CH1 CH2
CH3 CH4
CH1 CH2
CH3 CH4
CH5 CH6
CH7 CH8
CH9 CH10
CH11 CH12
CH13 CH14
CH15 CH16
CH15
CH11
CH16
CH12
CH7
CH3
CH8
CH4
CH13
CH9
CH14
CH10
CH5
CH1
CH6
CH2
CH15
CH11
CH16
CH12
CH1
CH3
CH8
CH4
CH13
CH9
CH14
CH10
CH5
CH7
CH6
CH2
CH3
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9
CH1 CH2
CH3 CH4
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9
CH15
CH11
CH16
CH12
CH7
CH3
CH8
CH4
CH13
CH9
CH14
CH10
CH5
CH1
CH6
CH2
CH1 CH2
CH3 CH4 CH6 CH7
CH3
CH2
CH4
CH1
CH5
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9 CH10 CH11 CH12 CH13 CH14 CH15 CH16
CH12
CH1
CH13
CH9
CH4
CH7
CH5
CH10
CH8
CH11
CH6
CH2 CH3
CH1
CH2
CH1
CH1 CH2
CH1
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9
CH13 CH14
CH11
CH15
CH10 CH12
CH16
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9
CH1 CH2
CH3 CH4
CH1 CH2
CH3 CH4
CH5 CH6
CH7 CH8
CH9 CH10
CH11 CH12
CH13 CH14
CH15 CH16
CH15
CH11
CH16
CH12
CH7
CH3
CH8
CH4
CH13
CH9
CH14
CH10
CH5
CH1
CH6
CH2
CH15
CH11
CH16
CH12
CH1
CH3
CH8
CH4
CH13
CH9
CH14
CH10
CH5
CH7
CH6
CH2
CH3
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9
CH1 CH2
CH3 CH4
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9
CH15
CH11
CH16
CH12
CH7
CH3
CH8
CH4
CH13
CH9
CH14
CH10
CH5
CH1
CH6
CH2
CH1 CH2
CH3 CH4 CH6 CH7
CH3
CH2
CH4
CH1
CH5
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9 CH10 CH11 CH12 CH13 CH14 CH15 CH16
CH12
CH1
CH13
CH9
CH4
CH7
CH5
CH10
CH8
CH11
CH6
CH2 CH3
CH1
CH2
CH1
CH1 CH2
CH1
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9
CH13 CH14
CH11
CH15
CH10 CH12
CH16
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9
CH1 CH2
CH3 CH4
CH1 CH2
CH3 CH4
CH5 CH6
CH7 CH8
CH9 CH10
CH11 CH12
CH13 CH14
CH15 CH16
CH15
CH11
CH16
CH12
CH7
CH3
CH8
CH4
CH13
CH9
CH14
CH10
CH5
CH1
CH6
CH2
CH15
CH11
CH16
CH12
CH1
CH3
CH8
CH4
CH13
CH9
CH14
CH10
CH5
CH7
CH6
CH2
CH3
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9
CH1 CH2
CH3 CH4
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9
CH15
CH11
CH16
CH12
CH7
CH3
CH8
CH4
CH13
CH9
CH14
CH10
CH5
CH1
CH6
CH2
CH1 CH2
CH3 CH4 CH6 CH7
CH3
CH2
CH4
CH1
CH5
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9 CH10 CH11 CH12 CH13 CH14 CH15 CH16
CH12
CH1
CH13
CH9
CH4
CH7
CH5
CH10
CH8
CH11
CH6
CH2 CH3
CH1
CH2
CH1
CH1 CH2
CH1
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9
CH13 CH14
CH11
CH15
CH10 CH12
CH16
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9
CH1 CH2
CH3 CH4
CH1 CH2
CH3 CH4
CH5 CH6
CH7 CH8
CH9 CH10
CH11 CH12
CH13 CH14
CH15 CH16
CH15
CH11
CH16
CH12
CH7
CH3
CH8
CH4
CH13
CH9
CH14
CH10
CH5
CH1
CH6
CH2
CH15
CH11
CH16
CH12
CH1
CH3
CH8
CH4
CH13
CH9
CH14
CH10
CH5
CH7
CH6
CH2
CH3
;
Page: 46
English _47
●
live
Channel Setting
You can display the channel in a desired area of a split screen.
1.	 Place the cursor over the camera name of each channel to display the <▼> key to the right on the screen.
2.	 Click a camera name to display a channel list where you can select a different channel.
3.	 Select a desired channel and click it.
The selected channel is displayed in the screen.
If you want to change the channel location, you can place your mouse cursor over the desired location.
`
` Ex : If you want to change channel 1 area to channel 7 area.
Switching to Single Mode
Double click with the mouse button on the desired channel in the split screen to switch the screen to the single
screen.
Press the channel number button on the remote control to switch to single screen.
Refer to "Remote Controller > Using the Number Button". (Page 16)
`
` Ex : With your mouse, double click on channel 3 or press the number 3 on the remote control.
Channel information
Select the <CH Info> in the live screen menu to check the
status of camera connection to each channel.
CH3 CH4
CH5 CH6
CH7 CH8
CH9 CH10
CH11 CH12
CH13 CH14
CH15 CH16
CH1
CH4 CH5 CH6
CH7 CH8 CH9
CH13 CH14
CH11
CH15
CH10 CH12
CH16
CH1 CH2
CH3 CH1
CH15
CH11
CH16
CH12
CH7
CH3
CH8
CH4
CH13
CH9
CH14
CH10
CH5
CH1
CH6
CH2
CH15
CH11
CH16
CH12
CH1
CH3
CH8
CH4
CH13
CH9
CH14
CH10
CH5
CH7
CH6
CH2
CH5 CH6
CH7 CH8
CH9 CH10
CH11 CH12
CH13 CH14
CH15 CH16
CH13 CH14 CH15
CH16
CH3 CH1
CH15
CH11
CH16
CH12
CH7
CH3
CH8
CH4
CH13
CH9
CH14
CH10
CH5
CH1
CH6
CH2
CH15
CH11
CH16
CH12
CH1
CH3
CH8
CH4
CH13
CH9
CH14
CH10
CH5
CH7
CH6
CH2
;
CH1
CH7 CH8
CH4
CH3
CH2
CH5
CH1
CH6 CH12
CH1
CH13
CH19
CH4
CH7
CH5
CH10
CH8
CH11
CH6
CH2 CH3
CH1 CH2
CH3 CH4
CH5 CH6
CH7 CH8
CH9 CH10
CH11 CH12
CH13 CH14
CH15 CH16
CH1
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9
CH13 CH14
CH11
CH15
CH10 CH12
CH16
CH1
CH2
CH1 CH2
CH3 CH1
CH15
CH11
CH16
CH12
CH7
CH3
CH8
CH4
CH13
CH9
CH14
CH10
CH5
CH1
CH6
CH2
CH15
CH11
CH16
CH12
CH1
CH3
CH8
CH4
CH13
CH9
CH14
CH10
CH5
CH7
CH6
CH2
CH1
CH7 CH8
CH4
CH3
CH2
CH5
CH1
CH6 CH12
CH1
CH13
CH19
CH4
CH7
CH5
CH10
CH8
CH11
CH6
CH2 CH3
CH1 CH2
CH3 CH4
CH5 CH6
CH7 CH8
CH9 CH10
CH11 CH12
CH13 CH14
CH15 CH16
CH1
CH4 CH5
CH2
CH6
CH1 CH3
CH7 CH8 CH9
CH13 CH14
CH11
CH15
CH10 CH12
CH16
CH1
CH2
CH1 CH2
CH3 CH1
CH15
CH11
CH16
CH12
CH7
CH3
CH8
CH4
CH13
CH9
CH14
CH10
CH5
CH1
CH6
CH2
CH15
CH11
CH16
CH12
CH1
CH3
CH8
CH4
CH13
CH9
CH14
CH10
CH5
CH7
CH6
CH2
;
Page: 47
48_ live
live
Live Status
Select <Live Status> from the live screen menu to display
status and transfer information of connected camera to each
channel.
•
• Model : Displays the camera model name connected to each
channel.
•
• Status : Displays the status of camera connection set to each
channel.
•
• IP Address : Displays the IP address of a camera set to each
channel.
•
• Codec : Displays the live profile codec information for a
camera set to each channel.
•
• Resolution : Displays the live profile resolution of a camera set to each channel.
•
• Frame Rate : Displays the live profile transmission rate for a camera set to each channel.
•
• Quality : Displays the live profile transmission quality of a camera set to each channel.
Record Status
Select <Record Status> from the live screen menu to display
camera profile, input/recording frame rates, input/limit/recording
bps of each channel.
•
• Total Bitrate (Record/Max) : Record bitrate shows the amount
of actual data recording while Total bitrate shows the
maximum data transfer allowed by the NVR.
•
• Profile : Shows the video profile configured to each channel.
•
• Frame (fps) : Show the input/record frames per second for
each channel.
•
• Bitrate (bps)
-
- Limit / Input / Record : Shows the amount of limit/input/recording data for each channel.
-
- Input / Limit : Shows the data ratio of actual data transferred from the camera and allowed maximum
defined by user.
•
• current : Shows the recording status information of currently transferred data.
•
• MAX : Shows recording information of the most biggest recording data out of configured standard and event
recordings.
•
• : Reloads the recording information.
•
• Record Setup : The menu screen will switch to the record setting screen.
M
M `
` The warning message on the list's bottom means the NVR replaced the selected recording profile with other available profile,
since the selected one does not produce video data which prohibits screen saving. If the screen displays video, it
automatically resets to the selected profile and its name turns to yellow in the list.
`
` If Key Frame recording exceeds the allowed data amount specified by limit bitrate, a popup alert and icon appear on the
screen.
The limited recording alert popup does not repeat after displaying once unless camera or recording settings are changed; it
may appear again if settings were changed to notify such status.
If you want to set the alert popup not to appear, change your setting of <Setup Warnings> not to display a message popup.
For further information on bitrate limit of recording data, refer to “Record Setting”. (Page 90)
Page: 48
English _49
●
live
Zoom
This is activated only in Live Single mode.
After selecting a single screen, if you use the Magnify function, the selected area will be magnified by 2.
1.	 In the live screen menu, select <ZOOM>.
Press the [ZOOM] button on your remote control or click < > on the launcher menu.
The Magnify icon in the middle of the screen will be displayed.
2.	 You can use the remote control's directional key(▲▼◄►) or drag with the mouse to set the area of
magnification.
3.	 Press the [ENTER] button or double click with the mouse to magnify the selected area by two times.
`
` In the magnified screen, you can drag with the mouse or use the remote control's navigational key (▲▼◄►) to move the
magnified area.
4.	 In the live screen menu, select <Zoom Out>.
Press the [ZOOM] button on your remote control or click < > on the launcher menu to cancel the
magnification function.
;
<Normal> <Enlarged twice>
Page: 49
50_ live
live
PoE Status
In the live screen, you can see the PoE status of each port.
1.	 Select the <PoE Status>.
PoE status view window is displayed.
•
• Consumption(W) : Displays the power consumption in PoE.
-
- 0 : No device is connected to the port or a device is using
its own power supply.
-
- – : Trouble in the port (More detailed trouble information can
be displayed in additional information.)
M
M `
` Overall PoE power specifications are as follows: SRN-1673S(16 ports)
is 200W, SRN-873S(8 ports) is 100W, and SRN-473S(4 ports) is 50W.
If a single port exceeds 36W, or the power to all ports exceeds the overall PoE power specifications, the power to ports will be shut
off sequentially.
•
• PoE : Turns on/off the power supply to the camera.
If checked, it means the power supply is On; if not checked, it means it is Off.
•
• Additional information : If there is a problem in the power supply, it is explained here.
Power supply problems include excessive power (class 1 to 4) and voltage errors.
•
• Total PoE power consumption : Display the sum of power consumption for all the ports.
2.	 Press <Return> to move to the previous screen.
Noise level according to PoE power consumption
Model Noise Level [dB] PoE Power
SRN-1673S
50 196W
48 154W
47 138W
Page: 50
English _51
●
live
Layout
In the live screen, you can set the layout for each channel.
Setting Up the Live Layout
This section outlines how to select a series of channels based on their purpose/accessibility and monitor them
in a single layout.
Example) Layout "Lobby" - Lobby camera 1, Lobby camera 2, Front entrance camera 2
Layout "VIP" - Directors' meeting room 1, Directors' meeting room 2, Directors' lounge 1, Corridor camera on
the 7th floor
To create a new layout, follow these steps:
a	 Open the channel layout setup menu.
b	 Click <New>.
c	 Enter a name for the selected channels (e.g., ELEVATOR).
d	 Select the channels that you want to add to the layout (e.g., 2, 7, 10, 15).
e	 Choose a split mode to apply (e.g., 4-way split).
f	 Click <OK>.
g	 Choose a layout to view it on the screen (e.g., change to ELEVATOR).
1.	 Select the < >.
The layout setting screen will appear.
•
• New : You can set the new layout.
•
• Rename : You can make changes to the selected layout.
When the layout is changed, the channel order is initialized.
•
• Delete : You can delete the selected layout.
•
• Ch. Table : You can select channels in the table to be registered in, or removed from the layout.
•
• Channel List : You can select channels in the list to be registered in, or removed from the layout.
2.	 Press the <New> button and enter the name of layout to add.
3.	 In the <Ch. Table> or <Channel List>, click and select the channel to be displayed on the layout screen.
4.	 Click on <OK> to save the selected layout.
M
M `
` The layout for each user is saved separately.
a
g
d
e
f
c
b

Question & answers

There are no questions about the Samsung SRN-1673S yet.

Ask a question about the Samsung SRN-1673S

Have a question about the Samsung SRN-1673S but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Samsung SRN-1673S. Please make sure that you describe your difficulty with the Samsung SRN-1673S as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.