Samsung SRD-470D manual

View a manual of the Samsung SRD-470D below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Samsung
  • Product: Digital Video Recorder
  • Model/name: SRD-470D
  • Filetype: PDF
  • Available languages: English

Table of Contents

Page: 1
Copyright
©2009 Samsung Techwin Co., Ltd. All rights reserved.
Trademark
is the registered logo of Samsung Techwin Co., Ltd.
The name of this product is the registered trademark of Samsung Techwin Co., Ltd.
Other trademarks mentioned in this manual are the registered trademark of their respective company.
Restriction
Samsung Techwin Co., Ltd shall reserve the copyright of this document. Under no circumstances, this
document shall be reproduced, distributed or changed, partially or wholly, without formal authorization of
Samsung Techwin.
Disclaimer
Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but
no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on
the user’s own responsibility. Samsung Techwin reserves the right to change the contents of this document
without prior notice.
Warranty
Samsung Techwin Co., Ltd shall reserve the copyright of this document. Under no circumstances, this
document shall be reproduced, distributed or changed, partially or wholly, without formal authorization of
Samsung Techwin.
4 Channel DVR
User Manual
Z6806127401A_SRD-470, 470D-IB_EN2 2
Z6806127401A_SRD-470, 470D-IB_EN2 2 2010-04-30 오후 6:06:39
2010-04-30 오후 6:06:39
Page: 2
English _3
IMPORTANT SAFETY INSTRUCTIONS
Read these operating instructions carefully before using the unit.
Follow all the safety instructions listed below.
Keep these operating instructions handy for future reference.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings, Install in accordance with the manufacturer’s
instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding- type plug. A polarized plug has
two blades with one wider than the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided for your safety. if the provided
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury from
tip-over.
Unplug this apparatus during lightning storms or when unused for long
periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
13)
14)
Z6806127401A_SRD-470, 470D-IB_EN3 3
Z6806127401A_SRD-470, 470D-IB_EN3 3 2010-04-30 오후 6:06:39
2010-04-30 오후 6:06:39
Page: 3
4_ overview
BEFORE START
This user manual provides Information for using the DVR such as brief introduction, part names, functions, connection
to other equipment, menu setup, etc.
You have to keep in mind the following notices :
SAMSUNG retains the copyright on this manual.
This manual cannot be copied without SAMSUNG’s prior written approval.
We are not liable for any or all losses to the product incurred by your use of non-standard product or violation of
instructions mentioned in this manual.
Prior to opening the case, please consult a qualified technician first. Whenever this is needed power must be
removed from the unit.
Before installing an additional HDD or connecting an external storage device (USB memory or USB HDD) to this
DVR, check the compatibility. Consult your provider for the compatibility list.
Warning
Battery
It is essential that when changing the battery in the unit, the replacement battery must be of the same type
otherwise there may be a possibility of an explosion.
The following are the specifications of the battery you are using now.
Normal voltage : 3V
Normal capacity : 170mAh
Continuous standard load : 0.2mA
Operating temperature : -20°C ~ +85°C
(-4°F ~ +185°F)
Connect the power cord into a grounded outlet.
The Mains plug is used as a disconnect device and shall stay readily operable at any time.
Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
System Shutdown
Turning off the power while the product is in operation, or undertaking improper actions may cause damage
or malfunction to the hard drive or the product.
Please turn off the power using the Power button on the front of your DVR.
After selecting <OK> in the pop-up menu, you can pull off the power cord.
You may want to install a UPS system for safe operation in order to prevent damage caused by an
unexpected power stoppage. (Any questions concerning UPS, consult your UPS retailer.)
Operating Temperature
The guaranteed operating temperature range of this product is 0°C ~ 40°C (32°F ~ 104°F).
This product may not work properly if you run right after a long period of storage at a temperature below the
guaranteed one.
Prior to using a device that has been stored for a long period in low temperatures, allow the product to stand
at room temperature for a period.
Especially for the built-in HDD in the product, its guaranteed temperature range is 5°C ~ 55°C (41°F ~ 131°F).
Likewise, the hard drive may not work at a temperature below the guaranteed one.
Ethernet Port
This equipment is in door use and all the communication wirings are limited to inside of the building.
•
•
•
•
•
❖
•
•
•
•
J 


❖
❖
❖
CALIFORNIA USA ONLY
This Perchlorate warning applies only to primary CR (Manganese Dioxide)
Lithium coin cells in the product sold or distributed ONLY in California USA.
“Perchlorate Material - special handling may apply,
See www.dtsc.ca.gov/hazardouswaste/perchlorate.”
overview
Z6806127401A_SRD-470, 470D-IB_EN4 4
Z6806127401A_SRD-470, 470D-IB_EN4 4 2010-04-30 오후 6:06:40
2010-04-30 오후 6:06:40
Page: 4
English _5

OVERVIEW
CONTENTS
OVERVIEW
4
4 Before Start
7 Features
9 Part Names and Functions (Rear)
10 Part Names and Functions (Front)
12 Remote Control
INSTALLATION
13
13 Checking the installation environment
14 HDD Addition
CONNECTING WITH OTHER DEVICE
17
17 Connecting the Video, Audio, and Monitor
17 Connecting the USB
17 Connecting POS Device
18 Connecting the Alarm Input/Output
18 Connecting the RS485 Device
19 Connecting the Network
LIVE
21
21 Getting Started
23 Live Screen Configuration
27 Live Mode
29 Spot Out
29 Zoom
30 Audio ON/OFF
30 Freeze
30 Event Monitoring
USING THE DVR
32
32 System Setup
42 Setting the Device
50 Setting the Recording
53 Setting the Event
56 Backup
57 Network Configuration
64 Controlling a PTZ device
Z6806127401A_SRD-470, 470D-IB_EN5 5
Z6806127401A_SRD-470, 470D-IB_EN5 5 2010-04-30 오후 6:06:40
2010-04-30 오후 6:06:40
Page: 5
6_ overview
overview
SEARCH & PLAY
66
66 Search
69 Playback
WEB VIEWER
70
70 Introducing Web Viewer
71 Connecting Web Viewer
73 Using Live Viewer
79 Using Search Viewer
83 Viewer Setup
93 About
BACKUP VIEWER
94
94 SEC Backup Viewer
APPENDIX
96
96 Product Specification
99 Product Overview
100 Default Setting
103 Troubleshooting
Z6806127401A_SRD-470, 470D-IB_EN6 6
Z6806127401A_SRD-470, 470D-IB_EN6 6 2010-04-30 오후 6:06:41
2010-04-30 오후 6:06:41
Page: 6
English _7

OVERVIEW
FEATURES
The SRD DVR (Digital Video Recorder) employs H.264 video encoding for 4 channel inputs and G.723 audio
encoding for 4 channels while simultaneously supports hard disc recording and playback.
These DVRs also supports network connectivity, providing remote monitoring from a remote PC transferring video
and audio data.
4 CH Composite Input Connectors
CIF(S)/2CIF(M)/4CIF(L) Recording
Network transfer regardless of the recording conditions using network specific codec
Improved quality using de-interlace chip
HDD information and status with HDD SMART
Record at 4CIF Size (NTSC: 704*480, PAL: 704*576) 120(NTSC)/100(PAL)IPS
4 CH Loop Through video port
HDD Overwrite
Massive HDD backup via USB 2.0
Backup using USB 2.0 memory and/or external CD/DVD writer
(DVD writer not supported in SRD-470)
Record and play 4 CH video data simultaneously
Various search modes (time, event, backup, POS, motion detection)
Lots of storage modes (time lapse, event, timed recording)
HDD extension (USB 2.0)
Alarm connection (input: 4, output:2, reset: 1)
Remote monitoring via Windows Network Viewer
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Z6806127401A_SRD-470, 470D-IB_EN7 7
Z6806127401A_SRD-470, 470D-IB_EN7 7 2010-04-30 오후 6:06:41
2010-04-30 오후 6:06:41
Page: 7
8_ overview
overview
Standards Approvals
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
Package Contents
Please unwrap the product, and place the product on a flat place or in the place to be installed.
Please check the following contents are included in addition to the main unit.
Remote Control Adaptor Power Cable
Network Viewer Software /
User Manual CD
User Manual Remote Control Battery (AAA)
HDD Fixing Screw
(Only applicable for SRD-470 : 4EA)
SATA Cable
(Only applicable for SRD-470 : 1EA)
For models that are not equipped with the HDD, one SATA cable is provided for HDD installation.
M 
M 
Z6806127401A_SRD-470, 470D-IB_EN8 8
Z6806127401A_SRD-470, 470D-IB_EN8 8 2010-04-30 오후 6:06:42
2010-04-30 오후 6:06:42
Page: 8
English _9

OVERVIEW
PART NAMES AND FUNCTIONS (REAR)
Part Names Functions
VGA Output port for VGA video signal.
RS-232C RS-232C communications port.
VIDEO OUT BNC type of output port for the composite video signal.
AUDIO OUT
Output port (RCA jack) for the audio signal.
It is recommended to use an amplifier-integrated speaker for the output of the audio
signal.

AUDIO IN 1~4 Output ports (RCA jacks) for the audio signal.
NETWORK Network connection port.
DC 12V Port to be connected to the 12V power source.
ALARM IN 1~4, G : Alarm input ports.
ALARM OUT 1, 2, COM : Alarm output ports.
RS485 Used to establish RS485 communications. (TX+, TX-)
USB USB connection port.
SPOT BNC type of output port for the Spot signal.
THROUGH Port to transfer the video signal to other video devices.
VIDEO IN
Input port for the composite video signal.
Supports both NTSC and PAL video signal.
1
11
3 4 5
6
7
8
9
10
2
Z6806127401A_SRD-470, 470D-IB_EN9 9
Z6806127401A_SRD-470, 470D-IB_EN9 9 2010-04-30 오후 6:06:44
2010-04-30 오후 6:06:44
Page: 9
10_ overview
overview
PART NAMES AND FUNCTIONS (FRONT)
SRD-470
SRD-470D
SRD-470
1 3 5
8 7 6
9
2
SRD-470D
3 5
8 7 6
4
9
2
1
Z6806127401A_SRD-470, 470D-IB_EN10 10
Z6806127401A_SRD-470, 470D-IB_EN10 10 2010-04-30 오후 6:06:45
2010-04-30 오후 6:06:45
Page: 10
English _11

OVERVIEW
Part Names Functions
Power
Power LED : Displays the power ON/OFF status.
Power Button : Used to turn the DVR ON/OFF.
MODE
In Live mode, pressing it will switch the mode to 4-split, PIP, and Auto Sequence in sequence.
In Search mode, pressing it will switch the mode to 9-split and 4-split in sequence.
For the Play Screen mode, refer to “Play”. (page 69)

AUDIO Sets Audio ON/OFF.
ALARM
Cancels the ALARM LED and the audible alarm when the alarm is going off, and to remove the
icon.
REC Starts or ends the recording.
/
Step Rewind () : Used for backward frame-by-frame search while in PAUSE.
Fast Rewind () : Used for quick backward search while in Play.
(-x2, -x4, -x8, -x16, -x32, -x64)
 Stop : Used to stop the playback.
►/ Play/Pause : Used to pause or resume the screen.
/
Fast Forward () : Used for quick forward playback. (x2, x4, x8, x16, x32, x64)
Step Forward ( ) : Used for forward frame-by-frame search while in PAUSE.
Open/Close Used to open and close the DVR-RW disc tray. (available for SRD-470D only)
LED Indicator
ALARM : Lights on when an event occurs.
HDD : Displays the normal access to HDD.
Upon access to HDD, LED repeats on and off.
NETWORK : Displays both network connection and data transfer status.
BACKUP : Displays when Backup is in progress.
REC : Lights on when recording is in progress.
Direction &
Select Button
Used to change a value or move the cursor up/down/left/right (	
◄ ►).
Selects a menu item or executes the selected menu.
Camera Control
PTZ : Sets PTZ Mode ON/OFF.
ZOOM(TELE) : Sets the screen to the x2 digital zoom.
Runs the TELE function in the PTZ Mode.
FREEZE(WIDE) : Runs the FREEZE function in the Live Mode.
Runs the WIDE function in the PTZ Mode.
SEARCH(VIEW) : This is the function that switches over to the Search mode.
(Perform the VIEW function when selecting the PTZ button.)
MENU : Used to access the Menu screen or move to the previous menu.
Channel
Used to select channel numbers directly in the Live Mode, or numbers in the numeric input
mode.
USB Port Connects the USB devices.
Z6806127401A_SRD-470, 470D-IB_EN11 11
Z6806127401A_SRD-470, 470D-IB_EN11 11 2010-04-30 오후 6:06:46
2010-04-30 오후 6:06:46
Page: 11
12_ overview
overview
REMOTE CONTROL
Using the Numeric buttons
Press any button among 1 to 4.
Move to the selected channel number.
Changing the Remote Control ID
Press the ID button of the remote control and check the ID displayed on the DVR screen.
The factory default ID of the remote control is 00.
Enter 2 digits of your selection in order, while pressing the system [ID] button.
When ID input is done, press the system [ID] button again to check the setting.
If you want to change the remote control ID to 08: Press 0 and 8 in order while the system [ID] button is pressed.
Remote control's ID and DVR’s ID should be matched for proper operation. Refer to “Remote Devices”. (Page 46)
1.
2.
1.
2.
3.
M 
SEARCH
Displays the search menu.
POWER
Displays the Exit pop up screen.
NUMBER [0~+10]
Used as the numeric input keys, or displays a single
channel.
T/W
Zooms in or out.
BACKUP
Displays the Backup Menu.
MODE
Changes the screen mode.
MENU
Goes to the system menu screen.
Up/Down/Left/Right(▲▼◄ ►)/ENTER
Moves the cursor up/down/left/right, and runs the
Select Menu.
FREEZE
Freezes the screen temporarily.
ZOOM
Runs the digital zoom (x2) function.
VIEW
Runs the View function in the PTZ mode.
OPEN/CLOSE
Opens or closes the CD tray.
DVR
Activates the DVR function.
ID
Sets the ID of the system.
Select 2 digits from 0 ~ 9 while pressing the ID Key.
PTZ
Displays or ends PTZ.
SCROLL ,.
Moves the menu scroll.
RETURN
Returns to the previous screen.
AUDIO
Turns Audio on/off.
ALARM
Cancels the Alarm.
REC LOCK
Selects the recording lock function.
PRESET
Displays the Preset Setup.
REC
Starts or ends the live recording.
Skip Backward (by unit time),
Slow Rewind, Slow Forward,
Skip Forward (by unit time) Move Frame
While paused, moves to the previous/next frame.
FR, STOP, PLAY/PAUSE, FF
Z6806127401A_SRD-470, 470D-IB_EN12 12
Z6806127401A_SRD-470, 470D-IB_EN12 12 2010-04-30 오후 6:06:46
2010-04-30 오후 6:06:46
Page: 12
English _13

INSTALLATION
Please take note of the followings before using this product.
Do not use the product outdoor.
Do not spill water or liquid in the connection part of the product.
Do not impose the system to excessive shock or force.
Do not pull out the power plug forcefully.
Do not disassemble the product on your own.
Do not exceed the rated input/output range.
Use a certified power cord only.
For the product with an input ground, use a grounded power plug.
CHECKING THE INSTALLATION ENVIRONMENT
Samsung Digital Video Recorder (“DVR” hereinafter) is a
state-of-art security device, and contains mass storage hard
disk(s) and critical circuits inside.
When the temperature rises inside the product, the product
may breakdown and the product life be shortened. Please
pay attention to the following recommendations before
installation.
The followings are the recommendations when Samsung DVR is installed on a rack.
Please ensure that the rack inside is not sealed.
Please ensure the air is circulated through the inlet/outlet as shown in the picture.
If the DVR or other devices on a rack is to be stacked as in the picture, provide a
suitable space or install a ventilating opening for air circulation.
For natural air convection, place the inlet at the bottom of the rack and the outlet on
top.
It is strongly recommended that a fan motor is installed at the inlet and the outlet for air
circulation. (Please fit a filter at the inlet to screen dust or foreign substances.)
Please maintain the temperature inside the rack or surrounding areas between 0°C ~
40°C (32°F ~ 104°F) as shown in the figure 1.
Rack Mount Instructions - The following or similar rack-mount instructions are
included with the installation instructions :
A) Elevated Operating Ambient - If installed in a closed or multi-unit rack assembly, the
operating ambient temperature of the rack environment may be greater than room
ambient. Therefore, consideration should be given to installing the equipment in an
environment compatible with the maximum ambient temperature (Tma) specified by
the manufacturer.
B) Reduced Air Flow - Installation of the equipment in a rack should be such that the
amount of air flow required for safe operation of the equipment is not compromised.
C) Mechanical Loading - Mounting of the equipment in the rack should be such that a hazardous condition is
not achieved due to uneven mechanical loading.
D) Circuit Overloading - Consideration should be given to the connection of the equipment to the supply circuit
and the effect that overloading of the circuits might have on overcurrent protection and supply wiring.
Appropriate consideration of equipment nameplate ratings should be used when addressing this concern.
E) Reliable Earthing - Reliable earthing of rack-mounted equipment should be maintained. Particular attention should
be given to supply connections other than direct connections to the branch circuit (e.g. use of power strips).
•
•
•
•
•
•
•
•
1.
2.
3.
4.
5.
6.
One Year: 24HR X 365 DAY =8,760 HR
Temperature
Unit: ºC
Life (Unit: HOURS)
[Figure 1]
installation
1
2
3
4
MODE
AUDIO
ALARM
DIGITA
L VIDEO
RECOR
DER
SRD-47
0D
REC
ZOOM
REC
FREEZE
SEARCH
TELE
WIDE
VIEW
MENU
BACKUP
NETWORK
HDD
ALARM
1
2
3
4
MODE
AUDIO
ALARM
DIGITA
L VIDEO
RECOR
DER
SRD-47
0D
REC
ZOOM
REC
FREEZE
SEARCH
TELE
WIDE
VIEW
MENU
BACKUP
NETWORK
HDD
ALARM
1
2
3
4
MODE
AUDIO
ALARM
DIGITA
L VIDEO
RECOR
DER
SRD-47
0D
REC
ZOOM
REC
FREEZE
SEARCH
TELE
WIDE
VIEW
MENU
BACKUP
NETWORK
HDD
ALARM
1
2
3
4
MODE
AUDIO
ALARM
DIGITA
L VIDEO
RECOR
DER
SRD-47
0D
REC
ZOOM
REC
FREEZE
SEARCH
TELE
WIDE
VIEW
MENU
BACKUP
NETWORK
HDD
ALARM
[Figure 2]
2
3
4
MO
DE
AUDIO
ALA
RM
REC
ZOOM
REC
FRE
EZE
SEA
RCH
TEL
E
WID
E
VIE
W
ME
NU
BAC
KUP
NETW
ORK
HDD
ALAR
M
DIG
ITAL VID
EO
RECO
RDER
SRD-4
70D
Z6806127401A_SRD-470, 470D-IB_EN13 13
Z6806127401A_SRD-470, 470D-IB_EN13 13 2010-04-30 오후 6:06:48
2010-04-30 오후 6:06:48
Page: 13
14_ installation
installation
HDD ADDITION
You can install additional HDDs.
Make sure to unplug the power cord from the wall outlet to prevent possible electric shock, injury or product
damage.
Please consult your provider for further information on HDD installation since improper installation or settings may
damage the product.
Number of HDDs supported : SRD-470 : Default 1 HDD + Up to 1 HDD added
SRD-470D : Default 1 HDD
Make sure to unplug the power cord from the wall outlet before proceeding with the installation.
Cautions for data loss (HDD care)
Please pay attention so that the data inside the HDD is not damaged.
Before adding a HDD, please check the compatibility with this DVR product.
HDD is vulnerable to malfunction due to its sensitive nature especially against shock when operating.
Please ensure that the HDD is free from such shock.
We are not liable for any damage to the HDD incurred by user’s carelessness or miss use..
Cases might cause damage to HDD or recorded data
To minimize the risk of data loss from a damaged HDD, please backup data as often as possible.
Data may be lost due to external impacts during disassembly or installation of the DVR.
HDD may be damaged if the DVR is suddenly stopped by a power cut or power off during operation.
HDD or files stored inside may be damaged if the main body is moved or impacted during the HDD operation.
Cautions when adding a HDD
When adding a HDD, ensure that the cable does not get caught or the insulation does not come off.
Pay attention so as not to lose the disassembly screws or accessories.
If the screws or accessories are not put together correctly, the product may breakdown or not operate properly.
Please check the HDD compatibility before adding a HDD.
Please contact your nearest dealer to obtain the list of compatible devices.


J 

1.
2.

3.

Z6806127401A_SRD-470, 470D-IB_EN14 14
Z6806127401A_SRD-470, 470D-IB_EN14 14 2010-04-30 오후 6:06:51
2010-04-30 오후 6:06:51
Page: 14
English _15

INSTALLATION
First, loosen the screws on both sides and remove
the cover.
Loosen the left and right screws on the lower hard
disk bracket to remove it.
Insert the additional hard disk into the bracket and
fix it using the provided screws.
1.
2.
3.
Hard disk bracket
Master hard disk
Z6806127401A_SRD-470, 470D-IB_EN15 15
Z6806127401A_SRD-470, 470D-IB_EN15 15 2010-04-30 오후 6:06:51
2010-04-30 오후 6:06:51
Page: 15
16_ installation
installation
Insert the bracket where the additional hard disk is
inserted into the lower bracket and fix it using the
provided screws.
When done, connect the power cable and connect
the signal cable (SATA cable) to the connector for
the main board.
Check if the connectors are properly connected
and there is no problem with wiring, and close the
cover and fix it with screws.
4.
5.
6.
SATA2
SATA1
Z6806127401A_SRD-470, 470D-IB_EN16 16
Z6806127401A_SRD-470, 470D-IB_EN16 16 2010-04-30 오후 6:06:57
2010-04-30 오후 6:06:57
Page: 16
English _17

CONNECTING
WITH
OTHER
DEVICE
CONNECTING THE VIDEO, AUDIO, AND MONITOR
CONNECTING THE USB
There is one USB port at the front and one at the back of the product.
You can connect a USB HDD, USB CD/DVD player, USB memory or mouse to the USB port.
If a USB HDD is connected to the system, recognition and settings are available in “Menu > Setting the Device >
Storage Device”. (Page 44)
This product supports hot-plugging, which connects/removes the USB device during the system operation.
If you use the USB device for Backup purposes, format it with FAT32 on PC if it is not formatted on the DVR.
CONNECTING POS DEVICE
You can connect a POS device to the RS-232C port on the product’s rear side when you connect it directly with
a RS-232C cable.
Connection setup for the RS-232C port is available in “Menu > Device > POS Devices”, press the
<POS Device Setup> button and set <Baudrate, Parity, Data, Stop bit and Transfer Type>. (Page 47)
1.
2.
3.
4.
J 
1.
2.
connecting with other device
VIDEO IN
VIDEO OUT
AUDIO OUT
SPOT OUT
VIDEO OUT(VGA)
AUDIO IN
MONITOR
Z6806127401A_SRD-470, 470D-IB_EN17 17
Z6806127401A_SRD-470, 470D-IB_EN17 17 2010-04-30 오후 6:07:03
2010-04-30 오후 6:07:03
Page: 17
18_ connecting with other device
connecting with other device
CONNECTING THE ALARM INPUT/OUTPUT
Connecting the alarm input signal
Connection port for the alarm input signal.
Connect one strand of the sensor signal line (two
strands) to the alarm input port and connect the other
to the [G] port.
Connecting the alarm output signal
Connection port for the alarm output signal.
Connect one strand of the sensor signal line
(two strands) to the alarm output port and connect
the other to the [COM] port.
CONNECTING THE RS485 DEVICE
Connect the rear [RS485 +, –] ports to the external device.
ex) you can connect and control the PTZ camera
which supports the RS485 communication.
Check if the RS485 device is compatible with the
product first.
Pay attention not to change the polarity (+/-) of the
RS485 device when connecting it.
Depending on camera’s type, connection polarity can
be different.
For further information, refer to the respective PTZ
Camera’s documentation.
M 



ALARM IN ALARM OUT
Z6806127401A_SRD-470, 470D-IB_EN18 18
Z6806127401A_SRD-470, 470D-IB_EN18 18 2010-04-30 오후 6:07:05
2010-04-30 오후 6:07:05
Page: 18
English _19

CONNECTING
WITH
OTHER
DEVICE
CONNECTING THE NETWORK
Connecting to Internet through Ethernet (10/100/1000BaseT)
Connecting to the Internet using the router
Windows
Network Viewer
Back Bone
Hub/Switcher
Hub/Switcher
RJ-45 Ethernet Cable
(Direct Cable)
INTERNET
DDNS Server
(Data Center)
Router
xDSL or Cable
Modem
xDSL or Cable
Modem
External Remote
PC
INTERNET
Z6806127401A_SRD-470, 470D-IB_EN19 19
Z6806127401A_SRD-470, 470D-IB_EN19 19 2010-04-30 오후 6:07:06
2010-04-30 오후 6:07:06
Page: 19
20_ connecting with other device
connecting with other device
Connecting to Internet through ADSL
Hub/Switcher
Phone(ADSL) Line
ADSL MODEM
RJ-45 Ethernet Cable
(Direct Cable)
Windows
Network Viewer
INTERNET
Z6806127401A_SRD-470, 470D-IB_EN20 20
Z6806127401A_SRD-470, 470D-IB_EN20 20 2010-04-30 오후 6:07:08
2010-04-30 오후 6:07:08
Page: 20
English _21

LIVE
GETTING STARTED
Starting the system
Connect the power cable of the DVR to the wall outlet.
Press the Power button on the front panel.
You will see the initialization screen.
The initialization process will last about 1 minute.
If a new HDD is installed, the initialization process may
take longer.
The live screen appears with a beep.
Shutting Down the System
You can shut down the system only if you have logged in to the DVR.
You require permission to shut down the system if you are not logged in as admin.
Press the [POWER] button on the remote control or the
front panel, or right-click to display the context sensitive
menu and select <Shutdown>.
The “Shutdown” confirmation window appears.
Use the arrow keys on the remote control or the front panel
to move to <OK> and press the [ENTER] button or click
<OK>.
The system will shut down.
For the permission management, refer to “Permission
Management > Setting Permissions”. (Page 37)
1.
2.
3.
4.
1.
2.
3.
M 
live
REC
REC
Shutdown
Are you sure to shutdown?
OK Cancel
Z6806127401A_SRD-470, 470D-IB_EN21 21
Z6806127401A_SRD-470, 470D-IB_EN21 21 2010-04-30 오후 6:07:09
2010-04-30 오후 6:07:09
Page: 21
22_ live
live
Login
To access a DVR or restricted menu, you should have logged in to the DVR.
In live mode, right-click any area of the screen.
You will see the context sensitive menu as in the right
figure.
Click <Login>.
The login dialog appears.
You can also see the login dialog to access a desired menu
by pressing the [MENU] button on the remote control or
the front panel.
The login dialog will also appear if you press a menu button on
the remote control or the front panel of the DVR when the
corresponding menu requires logging in.
After logged in, press [RETURN] on the remote control to display
the logout dialog.
By default, initial ID and password are set to “admin”, and “4321”.
For the restricted permission, refer to “Permission Management > Setting Permissions”. (Page 37)
Locking All Buttons
This will restrict access to all buttons available in the DVR.
In Live mode, press buttons in the order of [STOP]
[FREEZE] [STOP] [FREEZE] [MENU].
All buttons will be locked.
In the lock condition, press any button to display a dialog
where you are prompted to enter the password for
unlocking the buttons.
The button lock will be released if you enter the admin
password.
1.
2.



M 
1.
2.
Login
x ID admin
x Password
OK Cancel
Scene Mode
Audio Off
Freeze
Stop Alarm
Record
Play
Search
Backup
Main Menu
Shutdown
Hide Launcher
Login
Key Lock Password
x ID admin
x Password
OK Cancel
Z6806127401A_SRD-470, 470D-IB_EN22 22
Z6806127401A_SRD-470, 470D-IB_EN22 22 2010-04-30 오후 6:07:14
2010-04-30 오후 6:07:14
Page: 22
English _23

LIVE
LIVE SCREEN CONFIGURATION
Icons on the Live Screen
You can check the status or operation of the DVR with the icons on the live screen.
Name Description
Current Date, Time Displays the current time and date.
Login Information When you are logged in, the “LOG ON” icon will be displayed.
Screen Mode
Displayed if the zoom function is activated.
Displayed if you press the Pause button.
Displayed in Auto Sequence mode where all channels are switched at the
specific time interval.
Displayed if the recording is in process.
M To cancel the recording, enter the password.
System Operation
Displayed if there is a problem with the cooling fan.
Displayed if the HDD is full and the DVR has an insufficient space to record.
Displayed if no HDD is installed or the existing HDD should be replaced.
Displayed if the HDD needs a technical examination.
Displayed if a new firmware is found from the network.
Video Input Status
Displayed if no input is entered in the condition that the camera is set to <ON>.
Nothing will be displayed on the screen if the camera is set to <OFF>.
Camera Name/ Channel Displays the camera name and the changed channel, if any.
Camera Operation
Displays the resolution of the recording screen. (Page 52)
Displayed in PTZ setting, and highlighted yellow if PTZ is in operation.
Displays AUDIO ON/MUTE.
Not displayed in video mode if deactivated.
If the sensor is set to <ON>, the input signal will be displayed on the screen of
the connected channel.
Displayed if a motion detected in the condition that the motion detection is set to
<ON>.
Displays the current record mode from Record/Event/Schedule.
2010-01-01 00:00:01
CAM 01
CAM 01
Z6806127401A_SRD-470, 470D-IB_EN23 23
Z6806127401A_SRD-470, 470D-IB_EN23 23 2010-04-30 오후 6:07:20
2010-04-30 오후 6:07:20
Page: 23
24_ live
live
Error Information
If you turn on the system when the internal HDD is not connected or an error occurs, the “HDD FAIL” icon
( ) will be displayed on the top left corner. In this case, make sure you contact the service center for
assistance as this may cause a failure of recording, playback or backup.
If the cooling fan does not work properly or has a problem, the <Fan Information> window will appear and
the fan error icon ( ) will be displayed on the top left corner. In this case, check to see if the internal fan
works.
As a fan error can shorten the product life, make sure you contact the service center for assistance.
If you see the fan error icon or No HDD, HDD FAIL icons on the screen, contact the service center for more details.
Live Screen Menu
In addition to the buttons on the front panel or the remote control, you can access a desired menu by right-
clicking the mouse any area in live mode.
The context sensitive menu that appears by right-clicking the screen may differ, depending on the login/
logout, screen split mode and DVD operation mode.
Menu items of Search, Record, Backup, Shutdown and PTZ can be deactivated, depending on the user permission.
Split Mode Menu
The context sensitive menu in split mode differs, depending on the login/logout status.
•
•
M 
M 
Scene Mode
Audio Off
Freeze
Stop Alarm
Record
Play
Search
Backup
Main Menu
Shutdown
Hide Launcher
Login
< Split Mode Menu > < Single Mode Menu >
PTZ Alarm Freeze
Scene Mode
PTZ Control
ZOOM
Audio
Freeze
Stop Alarm
Record
Play
Search
Backup
Main Menu
Shutdown
Hide Launcher
Login
Scene Mode
Spot Out
Audio Off
Freeze
Stop Alarm
Record
Play
Search
Backup
Main Menu
Shutdown
Hide Launcher
Logout
2
13
12
11
10
9
8
7
6
5
4
3
1
Z6806127401A_SRD-470, 470D-IB_EN24 24
Z6806127401A_SRD-470, 470D-IB_EN24 24 2010-04-30 오후 6:07:22
2010-04-30 오후 6:07:22
Page: 24
English _25

LIVE
Menu Description
Scene Mode Refer to “Live Mode”. (Page 27)
Spot Out Refer to “Spot Out”. (Page 29)
Audio On/Off Refer to “Audio ON/OFF”. (Page 30)
Freeze Refer to “Freeze”. (Page 30)
Stop Alarm Stops the alarm output and the event monitoring. Refer to “Event Monitoring”. (Page 30)
Record/Stop Starts/stops the standard recording.
Play Plays the search result (data). Refer to “Search & Play > Play”. (Page 69)
Search Refer to “Search & Play > Search”. (Page 66)
Backup Refer to “Using the DVR > Setting the Backup”. (Page 56)
Main Menu Accesses the main menu. Refer to the Using the DVR section. (Page 32)
Shutdown Turns down the DVR.
Show/Hide Launcher Shows or hides the launcher. Refer to “View the Launcher Menu”. (Page 26)
Login/Logout You can log in or out.
Single Mode Menu
The single mode menu is available only in Single Mode.
The context sensitive menu for the One Channel mode, in Split mode is different from that of the Single mode.
Menu Description
Full Screen
Select and click a desired channel in Split mode to switch to the full screen of the selected
channel.
PTZ Control
Accesses the PTZ Control menu. The PTZ menu is activated only in One-Channel Live mode.
(Page 64)
ZOOM Enlarges the selected image. (Page 29)
PTZ Alarm Freeze
Full Screen
Spot Out
PTZ Control
ZOOM
Audio
Freeze
Stop Alarm
Record
Play
Shutdown
Hide Launcher
Logout
2
3
1
Z6806127401A_SRD-470, 470D-IB_EN25 25
Z6806127401A_SRD-470, 470D-IB_EN25 25 2010-04-30 오후 6:07:30
2010-04-30 오후 6:07:30
Page: 25
26_ live
live
View the Launcher Menu
The Launcher menu appears on the bottom of the live screen.
In Live mode, right-click to display the context menu and
select <Show Launcher>.
Move the cursor to the bottom and click a desired item in
the Launcher menu.
If no input is entered for 10 seconds, the menu will disappear.
The Launcher menu can be accessed only by using the mouse.
Menu Description
Date/Time
Displays the current time and date.
The indication of AM/PM is displayed if you set 12 hours for the time format in
“System > Date/Time/Language > Time”. (Page 32)
Screen Mode Displays in the sequence of 4-split, PIP and Auto Sequence.
Menu Expansion Button Click to display the hidden menu to the right.
Audio Turns ON/OFF the sound of the selected channel.
Zoom Enlarges the selected area. This is available only in Single Live mode.
PTZ Runs the PTZ Control launcher.
Alarm Stops the alarm if it's activated.
Freeze Freezes the Live screen temporarily.
Play Enters Play mode if a file to play exist, and if not, enters Search mode.
Record Start/End recording the Live screen.
1.
2.
M 

PTZ Alarm Freeze
Z6806127401A_SRD-470, 470D-IB_EN26 26
Z6806127401A_SRD-470, 470D-IB_EN26 26 2010-04-30 오후 6:07:33
2010-04-30 오후 6:07:33
Page: 26
English _27

LIVE
LIVE MODE
Displays 4 live video images in 3 different modes.
Switching the screen mode
To switch the split mode, select a screen mode in the launcher menu, or right-click to select a screen mode in
the context menu.
Press the [MODE] button on the front panel or the remote control to switch the mode in the sequence of the
launcher menu items.
Switching the screen automatically
With SRD-470/470D, you can display 4 live single screens in sequence.
In Single mode, If you have set <SEQ-Dwell Time> in “Setting the Device > Camera”, Auto Sequence will be
conducted at the set interval. (Page 42)
M 
CH1
CH1
CH1
CH1
4
1
Single mode
4-split mode PIP Auto Sequence

CH1 CH2
CH3 CH4 CH1
CH2
CH1

Z6806127401A_SRD-470, 470D-IB_EN27 27
Z6806127401A_SRD-470, 470D-IB_EN27 27 2010-04-30 오후 6:07:35
2010-04-30 오후 6:07:35
Page: 27
28_ live
live
Channel Setting
You can display the channel in a desired area of a split screen.
Place the cursor over the camera name of each channel to display the <▼> key to the right on the screen.
Click a camera name to display a channel list where you can select a different channel.
Select a desired channel and click it.
The current channel will be switched to the selected one.
Use the cursor to select a channel to move, and drag and drop it to a desired channel; this can also
change the channel position.
Ex : if switching CH 1 to CH 4
Switching to Single Mode
When in split mode, select and double-click a desired channel to switch to its Single mode.
Press the number corresponding to a desired channel on the front panel or the remote control to switch to its
Single mode.
Refer to “Remote Control > Using the numeric buttons”. (Page 12)
Ex : If double-clicking CH 3 or pressing the number “3” on the remote control or the front panel.
1.
2.
3.


CH1 CH2
CH3 CH4
CH4 CH2
CH3 CH1

CH1 CH2
CH3 CH4 CH3

Z6806127401A_SRD-470, 470D-IB_EN28 28
Z6806127401A_SRD-470, 470D-IB_EN28 28 2010-04-30 오후 6:07:36
2010-04-30 오후 6:07:36
Page: 28
English _29

LIVE
SPOT OUT
The Spot Out monitoring is independent of the Live mode, which monitors a specific channel through the Spot Out
port.
Selecting a Spot Out mode
If an event occurs such as sensor, motion or alarm from the Spot Out port in connection with a monitor, you
can select a output screen mode.
In Live mode, right-click any area on the screen.
The Live menu appears.
Click Spot Out.
Supports the Spot output in Single screen with Auto
Sequence mode.
The Spot output is supported only for a designated channel.
For the Spot Out port of a model, refer to “Part Names and
Functions (Rear)”. (Page 9)
ZOOM
This is available only in Single Live mode. In Single mode, select a desired area and use the Zoom function to
enlarge it twice.
Select <ZOOM> in the right-click menu.
Press the [ZOOM] button on the front panel or the remote control, or simply click < > in the launcher
menu. The zoom box appears.
Use the direction keys, or drag and drop to specify an area to enlarge.
Press the [ENTER] button, or double-click the selected area to enlarge it twice.
In the enlarged image, use the direction buttons (	
◄ ►) on the remote control or the front panel to move the
enlarged area.
Press the [ZOOM] button on the front panel or the remote control, or simply click < > in the launcher
menu to release the zoom.
1.
2.

1.
2.
3.

4.
Spot Out 1
Scene Mode
Spot Out
Audio Off
Freeze
Stop Alarm
Record
Play
Search
Backup
Main Menu
Shutdown
Hide Launcher
Logout
Auto Sequence
Single CH1
CH2
CH3
CH4
< Multichannel Live Menu >

Z6806127401A_SRD-470, 470D-IB_EN29 29
Z6806127401A_SRD-470, 470D-IB_EN29 29 2010-04-30 오후 6:07:37
2010-04-30 오후 6:07:37
Page: 29
30_ live
live
AUDIO ON/OFF
You can turn the sound on/off corresponding to the channel in Live mode.
AUDIO ON/OFF in Single mode
Click the audio icon ( ) on the screen, or press the [AUDIO] button on the front panel or the remote control
to turn it on/off.
Only the channel where <AUDIO> is set to <ON> in “Device > Camera” displays the audio icon ( ) in Live
mode that you can use to turn the sound on/off.
FREEZE
This is available only in Live mode, this pauses playing the Live image temporarily.
Press the [FREEZE] button on the front panel or the remote control, or click < Freeze > in the launcher
menu.
The playback of the image is stopped temporarily.
Press the [FREEZE] button again, or click < Freeze >.
This will release the freeze.
EVENT MONITORING
This will display the channel in sync with a specific event (Sensor/Motion/Video Loss) if it occurs.
In “Monitor > Event Display”, set the event monitoring to ON/OFF and specify the event display time. (Page 48)
If multiple events occur simultaneously, the screen will switch to a split mode.
- 2~4 events : 4-split mode
If the second event occurs within the set time of <Event Display>, the first event will last until the second
one is terminated. (Page 48)
Ex : If you set <Event Display> to 5 seconds, and only one event occurs in CH 1.
M 
1.
2.
•
•

Event occurrence 5 seconds
Stop alarm
CH1
Z6806127401A_SRD-470, 470D-IB_EN30 30
Z6806127401A_SRD-470, 470D-IB_EN30 30 2010-04-30 오후 6:07:46
2010-04-30 오후 6:07:46
Page: 30
English _31

LIVE
Ex : If you set <Event Display> to 5 seconds, and the second event occurs in CH 2 within the set time after the first
event occurred in CH 1.
Press the [ALARM] button to reset the alarm settings and to release the event mode.
If an alarm activates in the condition you have set the event record, and pre/post alarm times, the event record will
be performed.

M 

Event occurrence 4 seconds 9 seconds
Stop alarm
CH1
CH1 CH2
Z6806127401A_SRD-470, 470D-IB_EN31 31
Z6806127401A_SRD-470, 470D-IB_EN31 31 2010-04-30 오후 6:07:47
2010-04-30 오후 6:07:47
Page: 31
32_ using the DVR
You can setup the system properties, devices, and options for recording, event,
backup and network.
SYSTEM SETUP
You can setup Date/Time/Language, Permission, System Properties and Log.
Date/Time/Language
You can check and setup the current Date/Time and time related properties, as well as the language used for
the interface on the screen.
Setting the Date/Time/Language
Set the Date/Time/Language
Using the mouse may help make setup easier.
Press the [MENU] button on the remote control or on the
front panel.
If not logged in, it prompts with login window.
Refer to “Login”. (Page 22)
Use the left/right buttons (◄ ►) to select the <System>.
System property setup menu is selected.
Use the up/down buttons (	
) to select <Date/Time/
Language> and press the [ENTER] button.
Select <Date/Time/Language>.
A dialog to setup Date, Time and Language.
Use direction buttons (	
◄ ►) to select an item to set
and make your changes.
Date : Sets the date that will appear on the screen.
You can select the date format.
Time : Sets the time and its format that will appear on the
screen.
Select either one from <24 Hours, 12 Hours (AM/PM)>.
Time Zone : Sets the time zone of your area based on the
Greenwich Mean Time (GMT).
GMT (Greenwich Mean Time) is standard World Time and the basis
of world time zone.
Time Sync. : You can set the DVR’s current time
synchronized to a selected <Time Server> regularly if you select to use <Time Server>.
In this case, <Date/Time/Language> setup does not allow time adjustment.
1.

2.
3.
4.
5.
•
•
•

•
using the DVR
System
Logout Exit
Date/Time/Language
Permission Management
System Management
Log Information
Date/Time/Language
Date/Time/Language Holiday
x Date 2010-01-01 YYYY-MM-DD
x Time 08:14:24 24 Hours
x Time Zone GMT+09:00
x Time Sync. Setup
x DST Dec First (Sun) 0 Dec First (Sun) 0
x Language English
OK Cancel
Z6806127401A_SRD-470, 470D-IB_EN32 32
Z6806127401A_SRD-470, 470D-IB_EN32 32 2010-04-30 오후 6:07:47
2010-04-30 오후 6:07:47
Page: 32
English _33

USING
THE
DVR
- Time Server : Enter an IP or URL address of the time
server.
- Last Sync Time : Displays the most recent
synchronization time from the selected time server.
- Activate as Server : Set to <Use> to allow the DVR to act
as a Time Server for other DVRs.
DST : Set up Daylight Saving Time with its period to make
the time earlier than the GMT of its time zone by 1 hour
during the set period.
Language : Select your language. Sets the language for the
interface.
English, French, German, Spanish, Italian, Chinese, Russian, Korean, Polish, Japanese, Dutch, Portuguese,
Turkish, Czech, Danish, and Swedish are available.
When the Date/Time/Language setup is done, press <OK>.
You can also use numeric buttons on the remote control or front panel to enter values for Date,Time and other
numeric fields.
Setting Holiday
You can set specific dates to Holidays according to your preferences.
Holidays are applied to <Recording Schedule> and <Alarm Schedule> too.
Using the mouse may help make setup easier.
Use the up/down buttons (	
) in <Date/Time/Language> window to select <Date/Time/Language>, and
press the [ENTER] button.
Select <Holiday>.
A calendar for Holiday setup appears.
Use the left/right < > buttons to select year or month,
and press the [ENTER] button.
Use direction buttons (	
◄ ►) to select a desired date,
and press the [ENTER] button.
You will see the “Setting Holiday” screen.
Ex : Select January 11th and check on <1/11> only to make
every January 11th a holiday. Check both on <1/11> and <Jan
2nd Mon> to make every January 11th and 2nd Monday of
January holidays.
When the Holiday setup is done, press <OK>.
Using the Calendar
Using the mouse may help make setup easier.
{ Select year and month.
Select the left/right < > key on the left/right side of year/month and press [ENTER] button to
adjust by 1 year/month.
| Use direction buttons to select a date and press [ENTER] button.
A date with recorded data to be searched will appear in yellow in the System Log, Event Log,Time Search and Event
Search.

•
•
6.
M 
3.
4.
5.
6.

7.
Date/Time/Language
Date/Time/Language Holiday
x Date 2010 -01-01 YYYY-MM-DD
x Time 08:14:24 24 Hours
x Time Zone GMT+08:00
x Time Sync. Setup Not Used
x DST Dec First (Sun) 0H Dec First (Sun) 0H
x Language English
OK Cancel
Time Synchronization Setup
OK Cancel
x Synchronization Use
x Time Server 203.248.240.103
x Last Sync Time Fail
x Activate as Server Use
OK Cancel
Date/Time/Language
Date/Time/Language Holiday
2010 Jan
Sun Mon Tue Wed Thu Fri Sat
1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
31
OK Cancel
Date/Time/Language
Date/Time/Language Holiday
2010 Jan
Sun Mon Tue Wed Thu Fri Sat
1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
31
Setting Holiday
OK Cancel
1 / 11
Jan 2nd Mon
Z6806127401A_SRD-470, 470D-IB_EN33 33
Z6806127401A_SRD-470, 470D-IB_EN33 33 2010-04-30 오후 6:07:51
2010-04-30 오후 6:07:51
Page: 33
34_ using the DVR
using the DVR
Permission Management
You can set permissions of each user over the DVR's specific function and settings.
Setting the Administrator
You can set and change Administrator’s ID and password.
The administrator can use and set all menu items and functions.
Using the mouse may help make setup easier.
Use the up/down buttons (	
) in <System> window to
move to <Permission Management>, and press
[ENTER] button.
Select <Admin>.
A dialog for Admin ID and Password input appears.
Use direction buttons (	
◄ ►) to move to a desired
item, and set the ID and password.
By default, initial ID and password are set to “admin”, and
“4321”.
When the administrator setup is done, press <OK>.
Using Virtual Keyboard
{ For alphanumeric inputs, the virtual keyboard window
appears.
| Use direction buttons (	
◄ ►) to move to a desired
character, and press the [ENTER] button.
} In the upper text input box of the virtual keyboard, there
displays a list of candidate words containing the selected
character.
~ Select a word from the list, or use the keyboard to enter the
whole word.
OK Cancel
` 1 2 3 4 5 6 7 8 9 0 - =
q w e r t y u i o p [ ] \ Del
a s d f g h j k l ; ‘ Caps Lock
z x c v b n m , . / Shift
Space Ctrl
If there are many of candidate words, use < , > buttons to move between them forward and backward.
You can use mouse wheel and jog shuttle button too.
 Select <OK>.
Entered word is applied.
For upper case letters, use <Caps Lock> button.
For special characters, use <Shift> button.
Using the virtual keyboard is the same to a normal keyboard use in your region.
You can enter only lower-case alphabets and numeric values for the user ID.
For the password, use alphabets and special characters excluding < \ > and <“>.
You can use number buttons on the remote control or front panel.








3.
4.
5.
M 
6.
x ID admin
x Password ********
x Confirm P/W ********
Permission Management
Admin Group
OK Cancel
User Setup
Z6806127401A_SRD-470, 470D-IB_EN34 34
Z6806127401A_SRD-470, 470D-IB_EN34 34 2010-04-30 오후 6:07:54
2010-04-30 오후 6:07:54
Page: 34
English _35

USING
THE
DVR
Setting the Group
You can create user groups and setup permissions for those user groups.
You can register a user for each group in <User>.
Using the mouse may help make setup easier.
Use the up/down buttons (	
) in <System> window to
move to <Permission Management>, and press
[ENTER] button.
Select <Group>.
A window for <Add>, <Delete>, <Rename>, and
<Group Authority> setup appears.
Use direction buttons (	
◄ ►) to move to a desired
item, and set the value.
Add, Delete, Rename : You can add, delete, rename a
group or modify the permissions given to the group.
The virtual keyboard appears when <Add> or <Rename> was selected.
You can add up to 10 groups.
- Add : When you first run the DVR with the admin account, only the admin account exists. Add has already
been deactivated. Select to display the virtual keyboard. Enter a group name. You can add up to 10
groups.
- Delete : Deletes a user group that is already registered. Selecting Delete will delete all user accounts
belonging to that group.
- Rename : Renames a group that is already registered. Select <Rename> to display the virtual keyboard.
For entering a group name, refer to “Using Virtual Keyboard”. (Page 34)
Group Authority : Sets permissions to access menu items of each group.
Users of a group can access checked functions.
When the group setup is done, press <OK>.
To set the group authority
You can set the permissions of the group users to access the menu according to the channel.
Select a menu to which the group permission is assigned.
The menu where the group permission is assigned will be
displayed in the Live menu when a group user logs in.
Live View : You can set the permission to access the Live
screen according to the channel.
Search : You can set the permission to access the Search
menu according to the channel.
Backup : You can set the permission to access the Backup
menu according to the channel.
Menu : You can set menus accessible with a specific
permission.
Group users can access the permitted menus only.
Select a menu to display the Menu Permission screen.
Record Lock, PTZ, Remote Alarm Out, Shutdown : Select
an item so that the item will be added to the permissions.
Select <OK>.
Select and assign a group user so that the user can
access the specified menu.
3.
4.
5.
•

•
6.
1.
•
•
•
•
•
2.
Permission Management
Group
Admin
OK Cancel
User
Add Delete Rename
x Group
Group Authority
Live View
Search
Backup
Menu
Record Lock PTZ Remote Alarm Out Shutdown
Setup
Setup
Setup
Setup
Setup
Permission Management
Group
Admin
OK Cancel
User
Add Delete Rename
x Group ABC
Group Authority
Live View
Search
Backup
Menu
Record Lock PTZ Remote Alarm Out Shutdown
Setup
Setup
Setup
Setup
Setup
Channel Setup
OK Cancel
1 2 3 4
All
Permission Management
Group
Admin
OK Cancel
User
Add Delete Rename
x Group ABC
Group Authority
Live View
Search
Backup
Menu
Record Lock PTZ Remote Alarm Out Shutdown
Setup
Setup
Setup
Setup
Setup
Menu Permission
OK Cancel
Date/Time/Language
Date/Time/Language Holiday
System Management
System Information Settings
Log Information
System Log Event Log Backup Log
All
System Device Record Event Backup Network
Z6806127401A_SRD-470, 470D-IB_EN35 35
Z6806127401A_SRD-470, 470D-IB_EN35 35 2010-04-30 오후 6:07:56
2010-04-30 오후 6:07:56
Page: 35
36_ using the DVR
using the DVR
To restrict the user permissions
If the admin restricts all permissions of an added group, the users belonging to that group can access only
the default minimum menus and can change the user’s own password only.
Start the DVR.
If all permissions are restricted, only the Login dialog
should appear.
Log in with a registered user ID.
Right-click any area on the screen.
If all permissions are restricted, only the accessible context
menus should appear.
To change the user password
If you log in with a user account that is restricted to access the menu, you can change your own password
only.
Log in with your account.
Select <User Menu>.
The Permission Management setup screen appears.
Select <Permission Management>.
The Password setup dialog appears.
Enter a new password.
Select <OK>.
You change to the password will be applied.
1.
2.
3.
1.
2.
3.
4.
5.
x ID abc
x Password ********
x Confirm P/W ********
Permission Management
User
OK Cancel
Scene Mode
Audio Off
Freeze
Stop Alarm
User Menu
Hide Launcher
Logout
Login
x ID abc
x Password
OK Cancel
Z6806127401A_SRD-470, 470D-IB_EN36 36
Z6806127401A_SRD-470, 470D-IB_EN36 36 2010-04-30 오후 6:07:59
2010-04-30 오후 6:07:59
Page: 36
English _37

USING
THE
DVR
Setting the User
Users can be added only if a group was created in <Group> menu.
Using the mouse may help make setup easier.
Use the up/down buttons (	
) in <System> window to
move to <Permission Management>, and press
[ENTER] button.
Select <User>.
A window for Add User appears.
Use direction buttons (	
◄ ►) to select <Add> from the
window.
A window for “Add User” appears.
You can configure the Network Viewer settings including
name, ID, viewer, Select Group and password.
Result of the user setup appears in the <User> window.
To change the user property, use “Edit User”.
The “Edit User” window appears when you select a
desired item to be changed in the <User> window.
Viewer : If you select <Use>, you will be given access to the
Web Viewer and Network Viewer.
Refer to “Connecting Web Viewer”. (Page 71)
For more information about use of Network Viewer, refer to the
Network Viewer's user guide. (Page 8)
When the user setup is done, press <OK>.
Setting Permissions
You can set restricted access for all general users.
Items with restrictions will require logging in for use.
Using the mouse may help make setup easier.
Use the up/down buttons (	
) in <System> window to
move to <Permission Management>, and press
[ENTER] button.
Select <Setup>.
The Restricted Access, Restriction on Network Access,
Auto Log out, Manual Input of ID setup screen appear.
Use direction buttons (	
◄ ►) to move to a desired
item, and set the value.
Restricted Access : All menu items allowed for a user can
be set with restricted access.
- Checked ( ) : Restricted
- Not checked ( ) : Accessible
If it is not checked ( ) in <Restricted Access>, any user can access the item no matter what the <Group Authority>
setting.
If it is checked ( ) in <Restricted Access>, a user can access the item only if the user has permission in <Group
Authority> setting.
Restriction on Network Access : Restricts remote access from a <Restricted Access> network.
- All Network : Restricts all access instances via Network Viewer and Web Viewer.
- Web Viewer : Restricts access via the Web Viewer.
Auto Log out : A user will be automatically logged out if there is no operation on DVR for over set period of
time.
3.
4.
5.
•


6.
3.
4.
5.
•


•
•
Group Name ID Viewer Delete
Permission Management
User
Admin
OK Cancel
Setup
Add
Group
x Group All Group
Previous/Next Page
Group Name ID Viewer Delete
Permission Management
User
Admin
OK Cancel
Setup
Add
Group
x Group All Group
Previous/Next Page
Add User
OK Cancel
x Name Kim
x ID ksh
x Viewer Not Used
x Select Group ABC
x Password ********
x Confirm ********
Permission Management
Setup
Admin
OK Cancel
Group
Restricted Access
Live View Backup Record Lock Search
PTZ Remote Alarm Out Shutdown All
x Auto Log out 3 min
x Manual Input of ID ON
User
Restriction on Network Access
All Network Web Viewer
Z6806127401A_SRD-470, 470D-IB_EN37 37
Z6806127401A_SRD-470, 470D-IB_EN37 37 2010-04-30 오후 6:08:02
2010-04-30 오후 6:08:02
Page: 37
38_ using the DVR
using the DVR
Manual Input of ID : Prompts you to enter the user ID
manually for the login process.
- Checked ( ) : Encloses the registered user IDs with the
[½] symbols.
Use the virtual keyboard to enter the user ID.
When the permission setup is done, press <OK>.
System Management
You can check the system version, update to a newer version, as well as data backup and initialization.
Checking the System Information
You can check the current system version, broadcasting system, MAC address. You can update the system.
Using the mouse may help make setup easier.
Use the up/down buttons (	
) in <System> window to
move to <System Management>, and press [ENTER]
button.
Check the Version, Broadcast Format, and MAC Address.
System Information : Shows the current system’s
information.
The values can not be changed by a user.
S/W Upgrade : Updates the DVR’s software up to date.
Ex : If you connect to a storage device that has upgradable software
installed, and return to the <System Management> menu, the
current software version will be displayed.
•
6.
3.
4.
•
•

x Software Version V1.00h_100315180929
x Broadcast Format NTSC
x MAC Address 00:00:F0:54:FF:FF
System Management
System Information Settings
Previous
System Information
Upgrade
x Device Network
x Version No S/W Data
S/W Upgrade
Login
x ID *****
x Password
OK Cancel
x Software Version V1.00h_100315180929
x Broadcast Format NTSC
x MAC Address 00:00:F0:54:FF:FF
System Management
System Information Settings
Previous
System Information
Upgrade
x Device v3.1.0.4
x Version V1.00h_100320180929
S/W Upgrade
Z6806127401A_SRD-470, 470D-IB_EN38 38
Z6806127401A_SRD-470, 470D-IB_EN38 38 2010-04-30 오후 6:08:05
2010-04-30 오후 6:08:05
Page: 38
English _39

USING
THE
DVR
Updating the Software
Connect a device storing the software to be updated.
(It may take about 10 seconds to recognize the device.)
Upgradeable devices include USB memory, CD/DVD and
network device.
To update the network, the current DVR should have been
connected to the network.
Upgrade via the proxy server may not be enabled due to the
restricted access.
Select <System Management> from <System> window.
Select <System Information>.
When the recognized device appears, select <Upgrade>.
The <Upgrade> button will be activated only if the current <Software Version> of the <System Information> is
same to or older than that of <S/W Upgrade>.
Press <OK> in the “System Upgrade” window.
While updating, it shows the progress.
Updating progresses with 3 steps as shown in the figure.
When the updating is done, it automatically restarts.
Do not turn the power off until it finishes restarting.
If “Upgrade Failed” appears, retry from the step 4.
When you experience continued failure, consult the service
center for assistance.
•
1.


2.
3.
4.

5.

•
6.
M 
x Software Version V1.00h_100315180929
x Broadcast Format NTSC
x MAC Address 00:00:F0:54:FF:FF
System Management
System Information Settings
Previous
System Information
Upgrade
x Device USB2FlashStorage
x Version V1.08_090731170402
S/W Upgrade
System Upgrade
OK Cancel
Current Version V1.00h_100315180929
New Version V1.00h_100320180929
Do you want to upgrade?
x Software Version V1.00h_100315180929
x Broadcast Format NTSC
x MAC Address 00:00:F0:54:FF:FF
System Management
System Information Settings
Previous
System Information
Upgrade
x Device USB2FlashStorage
x Version V1.08_090731170402
S/W Upgrade
S/W Upgrade
Software upgrading...
x Software Version V1.00h_100315180929
x Broadcast Format NTSC
x MAC Address 00:00:F0:54:FF:FF
System Management
System Information Settings
Previous
System Information
Upgrade
x Device USB2FlashStorage
x Version V1.08_090731170402
S/W Upgrade
S/W Upgrade
Software upgrading...
S/W Upgrade
Software upgrading...
Do not turn off during the upgrade.
Z6806127401A_SRD-470, 470D-IB_EN39 39
Z6806127401A_SRD-470, 470D-IB_EN39 39 2010-04-30 오후 6:08:08
2010-04-30 오후 6:08:08
Page: 39
40_ using the DVR
using the DVR
Settings
You can copy and import the DVR settings by using a storage media.
Using the mouse may help make setup easier.
Use the up/down buttons (	
) in <System> window to
move to <System Management>, and press [ENTER]
button.
Select <Settings>.
A window of storage device and load factory default
appears.
Use direction buttons (	
◄ ►) to move to a desired
item, and export or import settings data to a storage
device.
Storage Device : Shows the connected storage device.
Export : Exports DVR settings to the connected storage device.
Import : Imports DVR settings from the storage device and applies to the DVR.
If <Include Network Settings> is checked, the network settings will be imported too.
Load Factory Default : If <Default> is selected, a
confirmation dialog for “Load Factory Default” prompts.
Press <OK> to initialize the system to the factory default.
To move to the previous menu, press <Previous>.
Log Information
You can browse logs on the system and events.
System Log
System Log shows log and timestamp on every system start up, system shutdown, and changes on system
settings.
Using the mouse may help make setup easier.
Use the up/down buttons (	
) in <System> window to
move to <Log Information>, and press [ENTER] button.
Select <System Log>.
Refer to “Using the Calendar”. (Page 33)
Click on the calendar < > to display the calendar window.
Type : When there are too many logs, you can display logs of
the desired format by selecting the type.
Use direction buttons (	
◄ ►) to move to a desired item,
and press <Search>.
3.
4.
5.
•
•
•

•
6.
3.
4.

•
5.
x Storage Device 1932 MB (Remained Capacity)
x DVR USB 38010100
x USB DVR
Include Network Settings
Settings
System Information
Previous
x Load Factory Default Default
Export
Import
System Management
Load Factory Default
OK Cancel
Sure to Default Setting?
x Storage Device 1932 MB (Remained Capacity)
x DVR USB 10041400
x USB DVR
Include Network Settings
Settings
System Information
Previous
x Load Factory Default Default
Export
Import
System Management
No. Log List Date/Time
Log Information
System Log Event Log
First Page
Search Day 2010-01-01
Previous
Previous/Next Page
Type View all
Search
Last Page
Backup Log
Z6806127401A_SRD-470, 470D-IB_EN40 40
Z6806127401A_SRD-470, 470D-IB_EN40 40 2010-04-30 오후 6:08:12
2010-04-30 오후 6:08:12
Page: 40
English _41

USING
THE
DVR
Event Log
Event log shows recorded events on alarms, motion detections and video loss.
It also shows the log and its timestamp.
Using the mouse may help make setup easier.
Use the up/down buttons (	
) in <System> window to
move to <Log Information>, and press [ENTER] button.
Select <Event Log>.
Use direction buttons (	
◄ ►) to move to the desired
item.
Set Search Day, Channel and Type and the press
<Search>.
Refer to “Using the Calendar”. (Page 33)
Click on the calendar < > to display the calendar window.
Backup Log
You can find out who backed up and the details (backup time, channel, device to use, file format, etc.).
Using the mouse may help make setup easier.
In the <System> window, press the up/down (	
) button
to move to <Log Information> and press the [ENTER]
button.
Select <Backup Log>.
Use the four direction buttons (	
◄ ►) to move to a
desired item.
Specify a search term and select <Search> in the right
corner.
Backup details for the search term will be listed.
3.
4.
5.
6.

3.
4.
5.
6.
No. Log List Date/Time
7 Motion Detection [CH 1] 2010-01-01 00:02:14
6 Motion Detection [CH 2] 2010-01-01 00:02:14
5 Motion Detection [CH 3] 2010-01-01 00:02:14
4 Motion Detection [CH 4] 2010-01-01 00:02:18
3 Motion Detection [CH 3] 2010-01-01 00:02:18
2 Motion Detection [CH 2] 2010-01-01 00:02:18
1 Motion Detection [CH 1] 2010-01-01 00:02:18
Log Information
Event Log
System Log
First Page
Search Day 2010-01-01
Previous
Previous/Next Page
CH All CHs Type View all
Search
Last Page
Backup Log
No. User Date/Time
Log Information
Backup Log
System Log
First Page
Search Day 2010-01-01 ~ 2010-01-02
Previous
Previous/Next Page
Search
Last Page
Event Log
Z6806127401A_SRD-470, 470D-IB_EN41 41
Z6806127401A_SRD-470, 470D-IB_EN41 41 2010-04-30 오후 6:08:15
2010-04-30 오후 6:08:15
Page: 41
42_ using the DVR
using the DVR
SETTING THE DEVICE
You can setup Camera, Storage Device, Remote Device, POS Device and Monitor.
Camera
Setting the Camera
You can set Video, Audio, Channel Name and Dwell Time of a Camera.
Using the mouse may help make setup easier.
Press the [MENU] button on the remote control or front
panel.
Use the left/right button (◄ ►) to select <Device>.
Device setting menu is selected.
Use the up/down buttons (	
) to move to <Camera>,
and press [ENTER] button.
Select <Camera>.
You will see a window where you can configure the
camera settings including Video, Audio, Channel Name,
Dwell Time and Progressive.
Use direction buttons (	
◄ ►) to move to a desired
item, and set the value.
Video
- <ON/OFF> : You can turn ON/OFF the selected
channel’s camera.
- <Covert1> : Shows information other than the video of the selected channel.
For privacy protection, it does not display the video while the recording continues.
- <Covert2> : Shows nothing but an empty screen while the recording continues.
Audio
- If set to <ON>, you can turn the audio of the channel ON/OFF on the Live screen.
- If set to <OFF>, the channel’s audio is off on the Live screen and not recorded.
Audio output is available for only 1 channel.
CH Name : Up to 15 characters including blanks are allowed.
Refer to “Using Virtual Keyboard”. (Page 34)
SEQ-Dwell Time : You can set the dwell time between channels for the Live screen and Spot Out.
If set to <OFF>, the channel is not listed in the Auto Sequence mode.
1.
2.
3.
4.
5.
•

•

•

•

Device
Logout Exit
Camera
Storage Device
Remote Device
POS Device
Monitor
CH Video Audio CH Name SEQ-Dwell Time Progressive
1 ON OFF CAM 01 5 sec OFF
2 ON OFF CAM 02 5 sec OFF
3 ON OFF CAM 03 5 sec OFF
4 ON OFF CAM 04 5 sec OFF
Camera
Camera PTZ
Screen Setup
OK Cancel
Z6806127401A_SRD-470, 470D-IB_EN42 42
Z6806127401A_SRD-470, 470D-IB_EN42 42 2010-04-30 오후 6:08:17
2010-04-30 오후 6:08:17
Page: 42
English _43

USING
THE
DVR
Progressive : You can set the progressive camera to ON/OFF.
If you set it to <ON> for the progressive camera, screen flickering will be reduced.
Screen Setup : The video appeared on the screen may vary
depending on the channel’s camera, configure the DVR
display to your preferences.
Select a channel and adjust the < (Brightness)>,
< (Contrast)>, and < (Color)> of the selected channel.
Press the <Init> to initialize settings back to the default 50.
When the camera setup is done, press <OK>.
Setting the PTZ
To use Camera’s PTZ functions, ID and protocols of each camera and DVR should be matched.
For other settings, refer to the “Remote Devices” settings. (Page 46)
Using the mouse may help make setup easier.
Use the up/down buttons (	
) in <Device> window to
move to <Camera>, and press [ENTER] button.
Select <PTZ>.
A window of PTZ settings appears.
Use direction buttons (	
◄ ►) to move to a desired
item, and select it.
ID : Set the ID of the connected camera of each channel.
You can easily setup by using the numeric buttons on the
remote control or front panel.
Protocol : Set the protocol of the connected camera of each
channel.
You can check the camera’s ID and protocol if you turn the camera off and on after connecting it to the DVR.
(Page 65)
When the PTZ setup is done, press <OK>.
•
J 
•
•
6.
3.
4.
5.
•
•
M 
6.
CH ID Protocol
1 0 > None
2 1 > None
3 2 > None
4 3 > None
Camera
PTZ
Camera
OK Cancel
Screen Setup
Init Apply to All CH
CH1 50 50 50
OK Cancel
Z6806127401A_SRD-470, 470D-IB_EN43 43
Z6806127401A_SRD-470, 470D-IB_EN43 43 2010-04-30 오후 6:08:19
2010-04-30 오후 6:08:19
Page: 43
44_ using the DVR
using the DVR
Storage Device
You can check information on storage devices.
Confirming Devices
You can check storage devices and their free space, usage as well as status.
Devices available are HDD, and USB devices (Memory, HDD, CD/DVD).
Refer to “Product Specifications > Backup”. (Page 96)
Using the mouse may help make setup easier.
Use the up/down buttons (	
) in <Device> window to
move to <Storage Device>, and press [ENTER] button.
Select <Device>.
No. : Shows the assigned number of the internal HDD.
To see the detailed positioning of the HDD according to the
number, refer to <HDD Map>.
Used/Total : Shows the used/total capacity of the storage
device.
Usage : Sets the storage device’s usage.
- USB memory and storage media such as CD/DVD are used for backup purpose only.
Status/Management : Shows the current status of the HDD, as in Normal/Check/Replace.
- Normal : Available to use
- Check : Available to use but recommended to replace
- Replace : Requires immediate replacement.
HDD Map : Shows the internal HDD’s locations according
to assigned numbers.
Refer to this for servicing or additional HDD installation.
To move to the previous menu, press <OK>.
3.
4.
•

•
•
•
•

5.
Storage Device
Device Format
OK Cancel
HDD Alarm
HDD Map
Device No. Used/Total Usage Status/Management
HDD 1 12.28G/499.37G Internal Normal
HDD Map
OK
<SRD-470D>
<SRD-470>
HDD Map
OK
Z6806127401A_SRD-470, 470D-IB_EN44 44
Z6806127401A_SRD-470, 470D-IB_EN44 44 2010-04-30 오후 6:08:25
2010-04-30 오후 6:08:25
Page: 44
English _45

USING
THE
DVR
Formatting
You can format a storage device.
Using the mouse may help make setup easier.
Use the up/down buttons (	
) in <Device> window to
move to <Storage Device>, and press [ENTER] button.
Select <Format>.
A window for selection of device for formatting appears.
Use direction buttons (	
◄ ►) to select a device to be
formatted.
Select <Format> on the bottom of the screen.
Press <OK> on the “Manage” confirmation window will
start formatting the selected device.
When the formatting is done, press <OK>.
HDD Alarm
You can set alarm settings for HDD defects such as Check Alarm Output Port, Replace Alarm Output Port,
and its duration.
Using the mouse may help make setup easier.
Use the up/down buttons (	
) in <Device> window to
move to <Storage Device>, and press [ENTER] button.
Select <HDD Alarm>.
A window for setting HDD check and replace output ports
and their durations appears.
Use direction buttons (	
◄ ►) to move to the desired
item.
Alarm
- Alarm signal will output through the alarm out port on the
rear side when selected <1>, <2>.
- If <BEEP> was selected, a beep will sound.
- If <All> was selected, both beep sound and alarm signal through rear side ports will output.
Check Alarm Output Port : If HDD generates check alarm, the alarm signal will output to the specified alarm
output port.
Replace Alarm Output Port : If HDD generates replace alarm, the alarm signal will output to the specified
alarm output port.
3.
4.
5.
6.
7.
3.
4.
5.
•
•
•
Storage Device
Device
OK Cancel
HDD Alarm
Format
Device Select Used/Total Usage
HDD 1 12.28G/499.37G Internal
Format
Storage Device
Format
OK Cancel
Device HDD Alarm
x Check Alarm Output Port
x Duration OFF
1 2 BEEP
All
x Replace Alarm Output Port
x Duration OFF
1 2 BEEP
All
Storage Device
Device
OK Cancel
HDD Alarm
Format
Device Select Used/Total Usage
HDD 1 12.28G/499.37G Internal
Format
Manage
Formatting deletes all recordings.
Proceed formatting?
OK Cancel
Z6806127401A_SRD-470, 470D-IB_EN45 45
Z6806127401A_SRD-470, 470D-IB_EN45 45 2010-04-30 오후 6:08:33
2010-04-30 오후 6:08:33
Page: 45
46_ using the DVR
using the DVR
Duration : Sets the alarm duration for the alarm signal and beep sound.
- If <BEEP> was selected, a beep will sound.
- If <All> was selected, both beep sound and alarm signal through rear side ports will output.
<Check> status means that the HDD is operating but it has problems that require technical examination.
( ) appears on the Live screen.
<Replace> status means that the HDD has defect and requires immediate replacement.
( ) appears on the Live screen.
When the HDD Alarm setup is done, press <OK>.
Remote Devices
You can set the RS-485 communication for use of PTZ Camera and system keyboard with the DVR.
Using the mouse may help make setup easier.
Use the up/down buttons (	
) in <Device> window to
move to <Remote Device>, and press [ENTER] button.
Use direction buttons (	
◄ ►) to move to the desired
item, and press [ENTER] button.
Set the values of each communication setup of the remote
device.
Baudrate : Baud rate settings of the DVR, PTZ camera and
system keyboard should be matched for proper operations.
Make sure to match IDs of the DVR, System Keyboard
and Remote Control, and press <OK>.
For changing the remote control’s ID, refer to “Changing the Remote Control ID”. (Page 12)
POS Devices
You can set properties of POS devices connected to the DVR.
A POS device connection requires channel, preset, and Port/Ethernet settings.
Using the mouse may help make setup easier.
Use the up/down buttons (	
) in <Device> window to
move to <POS Device>, and press [ENTER] button.
Use direction buttons (	
◄ ►) to move to a desired
item, and set the value.
POS USE : When selected <POS USE>, DVR and POS will
be connected.
If you change settings for the device and press <OK> while
the <POS USE> is not checked, the changes for POS device
will not be saved.
•
M 

6.
3.
4.
5.
•
6.
M 
3.
4.
•
J 
System Keyboard OFF ID 00
Remote Control ON ID 00
Baudrate Parity Data Stop Bit Transfer type
9600 None 8 1 Half Duplex
Remote Device
OK Cancel
POS USE
POS CH Preset Port/Ethernet
1 None No preset None
2 None No preset None
3 None No preset None
4 None No preset None
POS Device
OK Cancel
POS Device Setup
Z6806127401A_SRD-470, 470D-IB_EN46 46
Z6806127401A_SRD-470, 470D-IB_EN46 46 2010-04-30 오후 6:08:36
2010-04-30 오후 6:08:36
Page: 46
English _47

USING
THE
DVR
POS Device Setup : Sets the communication setups for the
POS device and DVR.
It is independent to the Remote Device setup.
CH : Select the camera to be synchronized to the POS
device.
If selected a channel input field,“Sync Channel Setup” window
appears.
One POS device can be synchronized to up to 4 cameras
(channels), however one channel cannot be synchronized to
multiple POS devices.
Channels to be synchronized to a POS device should be set to
“Event” in “Main Menu > Record > Recording Schedule”.
(Page 50)
Preset : Sets the name, start and end strings of the receipt
for the preset.
Preset name should be unique.
Use <Add> button to display “Add Preset” window, and set its
name, start string, and end string.
Port/Ethernet : Sets the port number for the DVR and POS
device connection.
COM1 : For RS-232C connections
7001~7016 : For Ethernet connections
When the POS Device setup is done, press <OK>.
•

•



•


•


5.
POS USE
POS CH Preset Port/Ethernet
1 None No preset None
2 None No preset None
3 None No preset None
4 None No preset None
POS Device
OK Cancel
POS Device Setup
POS Device Setup
OK Cancel
Baudrate Parity Data Stop bit Transfer type
9600 None 8 1 Half Duplex
POS USE
POS CH Preset Port/Ethernet
1 None No preset None
2 None No preset None
3 None No preset None
4 None No preset None
POS Device
OK Cancel
POS Device Setup
POS USE
POS CH Preset Port/Ethernet
1 None No preset None
2 None No preset None
3 None No preset None
4 None No preset None
5 None No preset None
6 None No preset None
7 None No preset None
8 None No preset None
POS Device
OK Cancel
Previous/Next Page
POS Device Setup
Preset Setup
OK Cancel
Add
No. Name Start End Input char. Set Del
Add Preset
OK Cancel
x Name
x Start Keyword
x End Keyword
Sync Channel Setup
OK Cancel
1 2 3 4
CH
Z6806127401A_SRD-470, 470D-IB_EN47 47
Z6806127401A_SRD-470, 470D-IB_EN47 47 2010-04-30 오후 6:08:38
2010-04-30 오후 6:08:38
Page: 47
48_ using the DVR
using the DVR
Monitor
You can configure information to be displayed and its format for Spot Out monitor.
Setting the Monitor
Using the mouse may help make setup easier.
Use the up/down buttons (	
) in <Device> window to
move to <Monitor>, and press [ENTER] button.
Select <Monitor>.
Use direction buttons (	
◄ ►) to move to a desired
item, and set the value.
Event Display : Sets the dwell time of the event channel
display on the monitor when an event occurs.
If selected <Continuous>, it displays the channel until you
press [ALARM] button to release it.
Display : Displays only checked items on the monitor
screen.
VGA : The current monitor may not display the video if the <VGA> settings do not match with this player
Sharpness : You can adjust the sharpness of the video output signal.
When the monitor setup is done, press <OK>.
Setting Display position
Some monitors many not display information (camera name, icon, time information, etc.) about the DVR,
depending on the condition. Then, you can change the display position of the data.
In the <Device> window, press the up/down (	
) button
to move to <Monitor> and press the [ENTER] button.
Select the <Monitor> item.
Select <Display Position Setup> in the bottom.
You will move to the <Display Position Setup> window.
Use the four direction buttons or the number buttons on
the front panel or the remote control to adjust the data
position.
3.
4.
5.
•
•
•
•
6.
3.
4.
5.
6.
Display Position Setup
OK Cancel
30 30
30
30
Monitor
Monitor Spot Out
x Event Display OFF
x Display Date Time CH Name Icon
x VGA 800x600
x Sharpness Level1 (Low)
Mode
OK Cancel
Display Position Setup
Z6806127401A_SRD-470, 470D-IB_EN48 48
Z6806127401A_SRD-470, 470D-IB_EN48 48 2010-04-30 오후 6:08:41
2010-04-30 오후 6:08:41
Page: 48
English _49

USING
THE
DVR
Setting the Spot Out
You can set the DVR to output information / video apart from the monitor out.
Using the mouse may help make setup easier.
Use the up/down buttons (	
) in <Device> window to
move to <Monitor>, and press [ENTER] button.
Select <Spot Out>.
The number of Spot Out terminals differs according to the
model.
Use direction buttons (	
◄ ►) to move to a desired
item, and set the value.
Spot Out 1 : You can select between Auto Sequence, and
Single.
Set Mode : A window for “Set Spot Out” appears and you
can set the channel for it.
You can set the dwell time between the screen switching in
“Setting the Device > Camera > SEQ-Dwell Time”.
(Page 42)
You can setup using the mouse right button in Live screen.
Refer to “Spot Out”. (Page 29)
When the Spot Out is done, press <OK>.
Setting the Screen Mode
You can configure the Live screen and Split Screens.
Using the mouse may help make setup easier.
Use the up/down buttons (	
) in <Device> window to
move to <Monitor>, and press [ENTER] button.
Select <Mode>.
Use direction buttons (	
◄ ►) to move to a desired
item, and set the value.
Live Screen : Select split modes for the Live screen.
4-split screens are included by default.
Play Screen : Select split modes for the playback screen.
Single screen and 4-split screen are provided by default.
When the screen mode setup is done, press <OK>.
3.
4.

5.
•
•
M 
6.
3.
4.
5.
•
•
6.
Monitor
Spot Out
Monitor
x Spot Out 1 SEQ
Mode
OK Cancel
Set Mode All
Monitor
Mode
Monitor Spot Out
OK Cancel
Live Play
Live Screen
Play Screen
Monitor
Spot Out
Monitor
x Spot Out 1 4-split
Mode
OK Cancel
Set Mode
Set Spot Out
OK
1 2 3 4
Z6806127401A_SRD-470, 470D-IB_EN49 49
Z6806127401A_SRD-470, 470D-IB_EN49 49 2010-04-30 오후 6:08:44
2010-04-30 오후 6:08:44
Page: 49
50_ using the DVR
using the DVR
SETTING THE RECORDING
You can setup scheduled recording, event recording and other recording related settings.
Recording Schedule
Make your reservation on a date and time to schedule the recording on specified time.
Using the mouse may help make setup easier.
Press the [MENU] button on the remote control or front
panel.
Use the left/right button (◄ ►) to select <Record>.
Record menu is selected.
Use the up/down buttons (	
) to move to <Recording
Schedule>, and press [ENTER] button.
Select <Recording Schedule>.
A window of scheduled recording setup appears.
Use direction buttons (	
◄ ►) to move to a desired
item, and set the value.
Apply to All CH : If selected <Apply to All CH>, “Apply to
All CH” window appears.
Press <OK> to apply the setup to all channels.
When the recording schedule setup is done, press <OK>.
1.
2.
3.
4.
5.
•
6.
Record
Logout Exit
Recording Schedule
Event Record Duration
REC Quality & Resolution
Record Option
All 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
Sun
Mon
Tue
Wed
Thu
Fri
Sat
Hol
No Recording Continuous Event Both(Cont&Evnt) Apply to All CH
OK Cancel
Recording Schedule
CH1
All 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
Sun
Mon
Tue
Wed
Thu
Fri
Sat
Hol
No Recording Continuous Event Both(Cont&Evnt) Apply to All CH
OK Cancel
Recording Schedule
CH1
Apply to All CH
OK Cancel
Apply recording schedule to all channels?
Z6806127401A_SRD-470, 470D-IB_EN50 50
Z6806127401A_SRD-470, 470D-IB_EN50 50 2010-04-30 오후 6:08:47
2010-04-30 오후 6:08:47
Page: 50
English _51

USING
THE
DVR
Recording Color Tags
Color Function Description
White No Recording No schedule / event recording
Orange Continuous Scheduled recording only
Blue Event Event recording only
Green Both(Cont&Evnt) Both scheduled / event recordings
Each press of a selected cell will cycle through <No Recording>-<Continuous>-<Event>-
<Both(Cont&Evnt)>.
Event Record Duration
You can set the beginning and ending point of a recording on an event.
Using the mouse may help make setup easier.
Use the up/down buttons (	
) in <Record> window to
move to <Event Record Duration>, and press [ENTER]
button.
Use direction buttons (	
◄ ►) to move to a desired
item, and set the value.
Pre Event : The recording of an event will start at a
pre-determined time prior to the actual occurrence of the event.
If it is set to 5 seconds, the recording begins from 5
seconds before the event.
POST Event : The recording will continue for a
pre-determined time after the actual end of an event.
If it is set to 5 seconds, the recording ends in 5 seconds after an event.
When the event recording duration setup is done, press <OK>.
REC Quality / Resolution
You can set resolution, IPS, and quality of recordings by channel, and by recording type of standard / event.
Setting Standard Recording Properties
You can set each channel’s resolution, quality and IPS for normal recordings.
Using the mouse may help make setup easier.
Use the up/down buttons (	
) in <Record> window to
move to <REC Quality & Resolution>, and press
[ENTER] button.
Select <Standard>.
When the recording setup is done, press <OK>.
3.
4.
•
•
5.
3.
4.
5.
Event Record Duration
OK Cancel
CH Pre Event POST Event
1 OFF 1 min
2 OFF 1 min
3 OFF 1 min
4 OFF 1 min
CH Resolution Record Rate Record Quality
1 4CIF(L) 30ips Level8(High)
2 4CIF(L) 30ips Level8(High)
3 4CIF(L) 30ips Level8(High)
4 4CIF(L) 30ips Level8(High)
REC Quality & Resolution
Standard Event
OK Cancel
Z6806127401A_SRD-470, 470D-IB_EN51 51
Z6806127401A_SRD-470, 470D-IB_EN51 51 2010-04-30 오후 6:08:50
2010-04-30 오후 6:08:50

Question & answers

There are no questions about the Samsung SRD-470D yet.

Ask a question about the Samsung SRD-470D

Have a question about the Samsung SRD-470D but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Samsung SRD-470D. Please make sure that you describe your difficulty with the Samsung SRD-470D as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.