Samsung RCDS70 manual

View a manual of the Samsung RCDS70 below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Samsung
  • Product: CD-player
  • Model/name: RCDS70
  • Filetype: PDF
  • Available languages: English

Table of Contents

Page: 0
1 2
B GB
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
PRODUCTO LASER CLASE 1
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE REAR COVER, NO USER
SERVICEABLE PARTS INSIDE, REFER SERVIC-
ING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC
SHOCK. DO NOT OPEN
CLASS 1 LASER PRODUCT
This Compact Disc player is
classified as a CLASS 1 LASER
product.
Use of controls, adjustments or perfor-
mance of procedures other than those
specified herein may result in haz-
ardous radiation exposure.
CAUTION-INVISIBLE LASER
RADIATION WHEN OPEN AND
INTER LOCKS DEFEATED, AVOID
EXPOSURE TO BEAM.
◆ Safety Warnings....................................................................................................1
■ Front Panel View.....................................................................................................3
■ Remote Control.......................................................................................................4
■ Power Sources........................................................................................................5
■ Setting the Clock.....................................................................................................6
◆ Tuner
■ Listening to the Radio ............................................................................................7
■ Searching For and Storing the Radio Stations ....................................................8
■ Selecting a Stored Station .....................................................................................9
■ Improving Radio Reception....................................................................................9
◆ CD-Player
■ Listening to the Compact Disc............................................................................10
■ Selecting a Track/+10 Function............................................................................11
■
Searching for a Specific Music Passage ..........................................................12
■
Random Playback Function ............................................................................13
■ CD Repeat Function.............................................................................................14
■ Repeat A↔B Function..........................................................................................15
■ Programming the order of Playback....................................................................16
◆ Tape Deck
■ Listening to the Cassette......................................................................................18
■ Various Functions for tape....................................................................................19
■ REV. Mode Function................................................................................................19
■ Selecting the side of a tape ......................................................................................19
■ Tape Speed Function ..............................................................................................19
■
Tape Counter..........................................................................................................19
■ Copying a Cassette (Dubbing).............................................................................20
■ Recording from Radio...........................................................................................21
■ Recording from CD...............................................................................................22
◆ Other Functions
■ CD Synchro Function ...........................................................................................23
■ Timer Function ......................................................................................................24
■ Sleep Timer/Display Color....................................................................................26
■ Equalizer Mode.....................................................................................................27
■ Power Surround/Mute Function...........................................................................28
■ MIC Function(Option) ...........................................................................................29
◆ Recommendations for Use
■ Precautions when using Compact Discs.............................................................30
■ Maintaining the Sound Quality.............................................................................30
■ Before Contacting the After-Sales Service..........................................................31
■ Specifications ........................................................................................................32
Safety Warnings Contents
This symbol indicates that dangerous voltage which can cause electric shock is present inside this unit.
This symbol alerts you to important operating and maintenance instructions accompanying the unit.
WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY
INSERT.
Page: 1
4
GB
Front Panel View
3
Remote Control
1
2
3
4
5
6
7
8
9
14
15
16
17
18
19
20
21
22
23
24
25
26
10
11
12
13
RCD-S70/S70S/S70B
Power
Surround
Sleep
CD SYNC
REC/Pause
Repeat
A B
CD
Repeat
Program/
Set
Mono/ST Band
Random
+10
Deck A/B
Counter
Reset
TAPE
EQ
Mute
VOL.
VOL.
Mode
1
13
14
15
16
17
18
19
20
21
22
23
24
25
2
3
4
5
6
7
8
9
10
11
12
1. Skip or Search
2. Program/Set
3. Beat Cut
4. Function(TUNER/CD/TAPE)
5. MO/ST(Mono/Stereo)
6. Mode
7. Random
8. CD Repeat
9. STOP
10. Clock/Timer
11. Timer On/Off
12. Standby/On
13. Phones
14. Tape Speed
15. Normal/High Dubbing
16. Volume
17. Display Color
18. REV. Mode
19. REC/Pause
20. Deck A/B
21. 3 Mode EQ
22. P. SURR
23. Repeat A↔B
24. Sleep
25. Open/Close
26. Mic
B
1. Standby/On
2. Sleep
3. Tape Rewind
4. Tape Fast-Forward
5. REC/Pause
6. CD Synchro
7. CD Repeat
8. CD Stop
9. Program/Set
10. Skip or Search
11. Mode
12. Mono/Stereo
13. Mute
14. Power Surround
15. EQ
16. Tape Counter Reset
17. Tape Play
18. Tape Stop
19. Deck A/B
20. Repeat A↔B
21. CD+10/Tape Speed
22. CD Play/Pause
23. Random
24. Volume
25. Band
Page: 2
To... Press...
Increase the hours
Decrease the hours
House Current
Batteries
230V
CLOCK BATTERY
4.5V; AA,Size X 3
For critical recordings or disc playing
Operating the unit using the AC power is recommended.
Note: ■ If the battery power is low, "BATT-LOW" will be displayed during playback and the
playback will stop.
■ The unit will not operate from the internal batteries while the AC power cord is
connected to the unit.
■ Be sure to install batteries (“AA” x 3) to prevent the program preset in the memory
and the active countdown of the Timer from being cleared accidently in case of
power failure of disconnection of the power cord.
12V ; D, R20, size X 8
B GB
6
5
1
2
3
For each step, you have a few seconds to set the required options.
If you exceed this time, you must start again.
Press Clock /Timer twice.
Result: CLOCK is displayed.
Press Program/Set.
Result: The hour flashes.
To... Press...
Increase the minutes
Decrease the minutes
6 When the correct time is displayed, press
Program/Set.
Result: The clock starts and is displayed, even
when the system is in standby mode.
2,4,6 3,5
1
4 When the correct hour is displayed,
press Program/Set.
Result: The minutes flash.
Power Sources Setting the Clock
■ AC power cord (supplied)
5
You can display the time, even when you are using another function, by press-
ing Clock/Timer once.
■ 1 to AC IN
■ 2 to wall outlet
Page: 3
7 8
GB
GB
Power
Surround
Sleep
CD SYNC
REC/Pause
Repeat
A B
CD
Repeat
Program/
Set
Mono/ST Band
Random
+10
Deck A/B
Counter
Reset
TAPE
EQ
Mute
VOL.
VOL.
Mode
1 2 3
1
2
3
1
2
3
Press the TUNING( , ) button.
Select the required frequency band by pressing
TUNER/BAND.
To improve broadcast reception.
Reorient the antenna for FM.
Reorient the player itself for AM(MW) .
For FM
For AM(MW)
Press the Volume button.
Power
Surround
Sleep
CD SYNC
REC/Pause
Repeat
A B
CD
Repeat
Program/
Set
Mono/ST Band
Random
+10
Deck A/B
Counter
Reset
TAPE
EQ
Mute
VOL.
VOL.
Mode
1
4
1 2
4 3
2
1
3
Select the required frequency band by pressing
TUNER/BAND on the front panel or Band on the
remote.
The PROGRAM function can be used to assign a new station to an existing
program number.
4 If you do not want to store the radio station found, revert to Step 3 and search for another station.
Otherwise:
a Press Program/Set.
Result: The MEMORY is displayed for a few seconds.
b Press or to assign a program number between 1 and 15.
c Press Program/Set to store the radio station.
Result: MEMORY is no longer displayed and the station is stored.
2 To search for a station... Press Mode button
Manually One or more times until MANUAL is displayed.
Automatically One or more times until AUTO is displayed.
5 To store any other radio frequencies required, repeat Steps 3 to 4.
◆ 15 AM stations
◆ 15 FM stations
Select the station to be stored by:
Pressing or buttons to increase or decrease the frequency respectively.
To scroll through the frequencies faster when searching manually, hold down the
or buttons.
The automatic search procedure may stop on a frequency that does not correspond to a
radio station. If this happens, use the manual search mode.
B
Searching for and Storing the Radio Stations
Listening to the Radio
PRESET function is explained in detail in the section “Selecting a Stored Station” on.
Page: 4
10
1
2
3
4
Press the Open/Close( ) button.
Result: The CD tray is opened.
1,5,6 7 2,4
Power
Surround
Sleep
CD SYNC
REC/Pause
Repeat
A B
CD
Repeat
Program/
Set
Mono/ST Band
Random
+10
Deck A/B
Counter
Reset
TAPE
EQ
Mute
VOL.
VOL.
Mode
7
1,5,6
Select the CD function by pressing CD( ).
Place the CD on the tray so that the CD label faces upward.
Press the Open/Close( ) button to close the tray.
Result: Number of tracks and the total playback time
are shown on the display.
5
7
Press the CD( ) button for playback.
To stop playback, press the STOP (■) button.
6 If it is desired to stop while the playback is processing, press the CD( )
button.
Press the CD( ) button once again to playback again.
Listening to the Compact Disc
9
1
2
You can listen to a stored radio station as follows:
You can improve the quality of radio reception by:
Rotating the FM or AM(LW, MW) aerial
If reception from a specific FM radio station is poor, press MO/ST on the
front panel or Mono/ST on the remote control to switch from stereo mode to
mono. The quality of the sound will be improved.
Select the required frequency band by pressing
TUNER/BAND on the front panel or Band on the
remote control.
Press Mode until “PRESET” is displayed.
Power
Surround
Sleep
CD SYNC
REC/Pause
Repeat
A B
CD
Repeat
Program/
Set
Mono/ST Band
Random
+10
Deck A/B
Counter
Reset
TAPE
EQ
Mute
VOL.
VOL.
Mode
1 2 3
1
2
3
3 Press , on the front panel or , on the remote control
to select the required program.
B
Selecting a Stored Station
Improving Radio Reception
Mode
GB
GB
Page: 5
You can select the track you wish to listen to, either when the compact disc
player is stopped or when a disc is playing.
To start playback at the beginning of the... Press...
Next track or once
Current track or once
Previous track or twice
Track of your choice , or
, the appropriate number
of times.
Press the +10 button briefly while playing back a CD. The track 10
tracks after the current one will then be played back.
Example: If you want to select track 43 during playback of track 15, press
the +10 button three times, and then press the button three
times.
15 ➝ 20 ➝ 30 ➝ 40 ➝ 41 ➝ 42 ➝ 43
When listening to a compact disc, you can quickly search for a specific music
passage on a track.
To search through the tracks... Press and hold down...
Forwards or for at least one second
Backwards or for at least one second
It is recommended that you turn the volume down before using this function.
B
11
GB
12
Selecting a Track/+10 Function
Power
Surround
Sleep
CD SYNC
REC/Pause
Repeat
A B
CD
Repeat
Program/
Set
Mono/ST Band
Random
+10
Deck A/B
Counter
Reset
TAPE
EQ
Mute
VOL.
VOL.
Mode
+10 +10 +10
● Selecting a Track
● Function to skip though 10 tracks at a time
+10 Button
Skip/Search
Button
Skip/Search Button
Searching for a Specific Music Passage
Power
Surround
Sleep
CD SYNC
REC/Pause
Repeat
A B
CD
Repeat
Program/
Set
Mono/ST Band
Random
+10
Deck A/B
Counter
Reset
TAPE
EQ
Mute
VOL.
VOL.
Mode
Skip/Search
Button
Skip/Search Button
Page: 6
B
13
1 Press the Random button.
Result: All the tracks are played in a random order.
You can listen to the tracks on a compact disc in a different order each time, as the
various tracks will be selected automatically in a random sequence.
CD Repeat button
CD Repeat
button
In the case of an original CD-R(Recordable) recorded in audio CD
format, CD-RW(Rewritable) and editing by the user, playback is
processed on the respective completed status. (The player may not
be played back according to the characteristics of the CD or record-
ed status.)
The CD-RW is comparably less reflexive than CD which causes more
time delay to read.
2 When playing tracks in a random order, you can:
Move on to the next track(selected at random) by pressing
, or , .
1 Press the CD Repeat button on the front Panel.
Result: “RPT 1” is displayed.
2 Press the CD Repeat button once again.
Result: “RPT ALL” is displayed.
3 When you wish to stop the CD Repeat function,
Press STOP ( ■ ) button.
3 When you have finished the random playback,
press STOP ( ■ ) or press the Random button
again.
Repeat and CD Synchro function are not available in random playing mode.
GB
14
CD Repeat Function
Power
Surround
Sleep
CD SYNC
REC/Pause
Repeat
A B
CD
Repeat
Program/
Set
Mono/ST Band
Random
+10
Deck A/B
Counter
Reset
TAPE
EQ
Mute
VOL.
VOL.
Mode
VOL
RPT ALL
● Regarding the playback of CD-R/RW
Random Playback Function
Power
Surround
Sleep
CD SYNC
REC/Pause
Repeat
A B
CD
Repeat
Program/
Set
Mono/ST Band
Random
+10
Deck A/B
Counter
Reset
TAPE
EQ
Mute
VOL.
VOL.
Mode
1
1
2
2
3
Page: 7
B
15
Repeat A ↔ B Function
Repeat A↔B button
Repeat A↔B
button
1 Press CD( ) or TAPE button.
Result: The CD(TAPE) player starts playing.
2 Press Repeat A ↔ B button .
Result: A Time is memorized.
3 Press Repeat A ↔ B button .
Result: B Time is memorized.
Your selected passages are repeated 3 times.
Power
Surround
Sleep
CD SYNC
REC/Pause
Repeat
A B
CD
Repeat
Program/
Set
Mono/ST Band
Random
+10
Deck A/B
Counter
Reset
TAPE
EQ
Mute
VOL.
VOL.
Mode
When you select CD(TAPE) Repeat A ↔ B playback, the music passages to
which you were listening is repeated 3 times.
You can decide:
The order of the track desired to listen
The track not desired to listen
A maximum of up to 24 order of tracks desired to listen may be programmed.
Before selecting the track, the CD player should be stopped.
This function may be used simultaneously with the CD Repeat function.
4 When you have finished the Repeat playback, Press Repeat A ↔ B.
When setting the Repeat A↔B function during tape playback, an end point B
cannot be set within seven seconds after setting the start point A.
1 Press Program/Set.
Result: The following indications are displayed:
2 Select the required track by pressing:
or to move back through the tracks
or to move forward through the tracks
3 Press Program/Set to confirm your selection.
Result: The selection is stored and is displayed.
GB
16
Programming the Order of Playback
Power
Surround
Sleep
CD SYNC
REC/Pause
Repeat
A B
CD
Repeat
Program/
Set
Mono/ST Band
Random
+10
Deck A/B
Counter
Reset
TAPE
EQ
Mute
VOL.
VOL.
Mode
1,3 ,6
2
5
1,3,6 2
5
program no. Track Track no.
4 To select other tracks, repeat Steps 2 to 3.
Page: 8
B
17
GB
18
5
6
7
To check your selection of tracks,
Press Program/Set.
If you have already programmed 24 tracks,
program number is displayed.
To cancel the selection, press STOP ( ■ ) button twice.
Result: PROGRAM is no longer displayed.
Press CD ( ) to listen to the track selection in the order
programmed.
1
2
3
Select the TAPE function
by pressing TAPE.
1,5 2
Power
Surround
Sleep
CD SYNC
REC/Pause
Repeat
A B
CD
Repeat
Program/
Set
Mono/ST Band
Random
+10
Deck A/B
Counter
Reset
TAPE
EQ
Mute
VOL.
VOL.
Mode
5
4
4
To open either Deck A or B, press
the corresponding Push/Eject ( )
button.
Insert a cassette to Deck A or B.
5 Press the TAPE button.
4 Select Deck A or B by pressing Deck A / B button.
6 To stop playing the cassette,
press STOP ( ■ ).
Push Eject
Listening to the Cassette
If you open the compartment, the selection is cancelled.
Page: 9
This function is only available in Deck B.
When the display indicates... The cassette plays back...
One side of the selected
cassette and then stops.
One side of the cassette.
The other side of the
cassette and then stops.
Both sides of the cassette
indefinitely until you press stop.
B
19
Pressing the TAPE button while playing
reverses the side (Front and Back)
This function is available in Deck B only.
During playback, you can select from various playback speeds by using the Tape Speed.
SPEED +10: Playback at the speed 0.10 times faster than the original speed.
OFF: Playback at normal speed.
SPEED -10: Playback at the speed 0.10 times slower than the original speed.
Select the desired speed by using the +10 button on the remote.
Various functions for tape
Power
Surround
Sleep
CD SYNC
REC/Pause
Repeat
A B
CD
Repeat
Program/
Set
Mono/ST Band
Random
+10
Deck A/B
Counter
Reset
TAPE
EQ
Mute
VOL.
VOL.
Mode
● REV. Mode Function ❇ This function is only available on S75/S75S model.
● Selecting the side of a tape ❇ This function is only available on S75/S75S model.
● Tape Speed Function
● Tape Counter
REV.Mode Button
Tape Speed Button
Repeat A↔ B Button
When playing a cassette, a counter is displayed to enable you to take note of the counter value.
The counter is only displayed when a cassette is being played.
Before starting to record a cassette for which you wish to take note of the counter values at the
beginning of each track, reset the counter by pressing
Counter Reset on the remote control.
2 3
1
Copying a Cassette (Dubbing)
1
2
3 When you have finished recording,
press STOP ( ■ ).
Put the tape you want to copy into Deck A and put an empty tape into
Deck B.
To copy a cassette, press Nor/High Dubbing button.
To copy a cassette at high speed, press
Nor/High Dubbing button for at least two seconds.
<Deck A> <Deck B>
20
You do not need to adjust the volume, as it has no effect on the recording.
GB
Tape Speed Button
Repeat A ↔ B Button
Page: 10
1
2
3
4
Select the required frequency band by pressing
TUNER/BAND.
Insert a cassette to Deck B.
Beat-Cut
When an AM(MW) is being recorded,
the Beat Cut button can be used to reduce noises.
Set the button to the best position in which such noises can
be reduced.
Power
Surround
Sleep
CD SYNC
REC/Pause
Repeat
A B
CD
Repeat
Program/
Set
Mono/ST Band
Random
+10
Deck A/B
Counter
Reset
TAPE
EQ
Mute
VOL.
VOL.
Mode
1
3 4
2
3
4
Press the REC/Pause button.
Select the radio station that you wish to
record by pressing , or , .
22
5 To stop recording, press STOP ( ■ ).
Push Eject
21
B GB
1
2
3
4
Place the CD on the tray.
Insert a cassette to Deck B.
Power
Surround
Sleep
CD SYNC
REC/Pause
Repeat
A B
CD
Repeat
Program/
Set
Mono/ST Band
Random
+10
Deck A/B
Counter
Reset
TAPE
EQ
Mute
VOL.
VOL.
Mode
1
4
3
4
2
3
With the label facing UP.
Press the CD( ) button.
Press the REC/Pause button.
Recording from Radio Recording from CD
Push Eject
5 To stop recording, press STOP ( ■ ).
To prevent accidental erasure
Break off the tab corresponding to the side which has been
recorded on. Recording on that side will be protected.
Recorded side
Tab
To re-use
Page: 11
24
23
B GB
1
2
3
Insert a cassette to Deck B.
Place the CD on the tray.
Press the CD Synchro button on the remote control.
When stopped, press the button to start the recording from the first
piece of music.
Press CD Synchro button on the remote control during the playback of
CD to start the recording from the first part of the music being played.
4 To stop recording, press STOP ( ■ ).
1 Press Clock/Timer until ‘TIMER’ is displayed.
2 Press Program/Set.
Result: ON TIME is displayed for a few seconds, fol-
lowed by any switch-on time already set; you
can set the timer switch-on time.
3 Set the timer switch-on time.
a Set the hour by pressing or button.
b Press Program/Set.
Result: The minutes flash.
c Set the minutes by pressing or button.
d Press Program/Set.
Result: OFF TIME is displayed for a few seconds,
followed by any switch-off time already set;
you can now set the timer switch-off time.
The timer enables you to switch the system on or off at specific times.
Example: You wish to wake up to music every morning.
◆ Before setting the timer, check that the current time is correct.
◆ For each step, you have a few seconds to set the required options.
If you exceed this time, you must start again.
2,3,4,5,7
2,3,4,5,7
3,4,5,6
3,4,5,6
8
1
Power
Surround
Sleep
CD SYNC
REC/Pause
Repeat
A B
CD
Repeat
Program/
Set
Mono/ST Band
Random
+10
Deck A/B
Counter
Reset
TAPE
EQ
Mute
VOL.
VOL.
Mode
8
CD Synchro Function Timer Function
Power
Surround
Sleep
CD SYNC
REC/Pause
Repeat
A B
CD
Repeat
Program/
Set
Mono/ST Band
Random
+10
Deck A/B
Counter
Reset
TAPE
EQ
Mute
VOL.
VOL.
Mode
1
3
2
Push Eject
With the label facing UP.
Page: 12
25
6 Press or button to select the source to be played when the
system switches on.
If you select... You must also...
TAPE (cassette) Insert a cassette tape.
TUNER (radio) a Press Program/Set.
b Select a preset station by pressing
Tuning or .
CD (compact disc) Load a compact disc.
7 Press Program/Set to confirm the timer.
8 Press Standby/On to set the system to standby mode.
5 Press or button to adjust the
volume level and press Program/Set.
4 Set the timer switch-off time.
a Set the hour by pressing or button.
b Press Program/Set.
Result: The minutes flash.
c Set the minutes by pressing or button.
d Press Program/Set.
Result: VOL 13 is displayed, where 13 corresponds to the
volume already set.
After having set the timer, it will start automatically as shown by the
TIMER indication on the display. If you no longer wish to use the timer,
you must cancel it.
To... Press Timer On/Off...
Cancel the timer Once.
Result: is no longer displayed.
Restart the timer Once again.
Result: is displayed again.
You can set the system to switch off automatically.
Example : You wish to go to sleep to music.
The System allows you to choose your favorite color to produce your own
personal atmosphere.
26
GB
Press Sleep one or more times to indicate how long the
system should continue playing before it switches off:
At any time, you can check the remaining time by
pressing Sleep.
To cancel Sleep function, press Sleep one or more
times until OFF is displayed.
Power
Surround
Sleep
CD SYNC
REC/Pause
Repeat
A B
CD
Repeat
Program/
Set
Mono/ST Band
Random
+10
Deck A/B
Counter
Reset
TAPE
EQ
Mute
VOL.
VOL.
Mode
Sleep Timer/Display Color
Sleep Button
Sleep Button
Display Color Button
● Sleep Timer
● Cancelling the Timer
Press the Display Color button and select the color
you want.
Result: Whenever the button is pressed, the color is
repeated in the sequence of CYAN➝GREEN
➝ RED➝BLUE➝VIOLET➝Y.GREEN➝
WHITE➝LED OFF➝AUTO.
If you select Auto mode, 7 colors are displayed for 2
seconds alternatively.
● Display Color ❇ This function is only available on S75 model.
B
Page: 13
28
GB
Your CD player is equipped with a preset equalizer that enables you to
choose the most appropriate balance between treble and bass
frequencies, according to the type of music to which you are listening.
Power
Surround
Sleep
CD SYNC
REC/Pause
Repeat
A B
CD
Repeat
Program/
Set
Mono/ST Band
Random
+10
Deck A/B
Counter
Reset
TAPE
EQ
Mute
VOL.
VOL.
Mode
Equalizer Mode
B
27
3 Mode EQ
EQ
P.SURR Button
Mute Button
Power Surround
Button
Press 3 Mode EQ until the required option is selected.
Press EQ on the remote control.
Press the button repeatedly to select
CLASSIC ➝ROCK➝POP➝PASS.
1 Press P.SURR on the front panel.
Press Power Surround on the remote control.
The Power Surround replaces conventional stereo sound with a wider and
more true-to-life sound. It creates the feeling of being right at the center of
the music and being surrounded by total music sound.
Power
Surround
Sleep
CD SYNC
REC/Pause
Repeat
A B
CD
Repeat
Program/
Set
Mono/ST Band
Random
+10
Deck A/B
Counter
Reset
TAPE
EQ
Mute
VOL.
VOL.
Mode
2 To cancel this function, Press P.SURR or Power Surround again.
Power Surround/Mute Function
● Power Surround Function
1 Press Mute.
You can turn the sound off temporarily on your system.
Example: You wish to answer a telephone call.
Mute
2 To switch the sound back on (at the same volume as before), press
Mute again or the Volume buttons.
● Mute Function
Page: 14
◆ Handle your compact discs with care.
Always hold them by the edges to avoid leaving
fingerprints on the shiny surface.
◆ When you have finished playing a compact disc,
always put it back in its case.
◆ Do not fix paper or adhesive tape to the discs
and do not write on the label.
◆ Clean them with a special-purpose cloth.
◆ Store your compact discs in a clean place,
out of direct sunlight, where they will not be exposed to
high temperatures.
◆ Always use compact discs marked .
30
To obtain the best possible results from your cassette player, you must
clean it regularly (heads, roller and drive capstan).
Open the deck by pressing deck cover.
Use a cotton bud and a special cassette cleaning agent to clean the:
◆ Heads (①)
◆ Roller (②)
◆ Drive capstan (③)
To guarantee hours of enjoyable listening with your cassettes:
◆ Check that the tape in the cassette is always sufficiently taut.
◆ Store your cassettes in a clean place, out of direct sunlight, where they will not
be exposed to high temperatures.
◆ Avoid using 120-minute cassettes as they are extremely fragile.
COMPACT
DIGITAL AUDIO
Precautions when using Compact Discs
Maintaining the Sound Quality
The microphone enables the user to mix in his or her vocal to sing-along
with the music.
Preparation
Plug the microphone with a 3.5mm MIC jack into microphone terminal.
❇ The microphone does not work during high-speed dubbing.
29
B
MIC Function (Option)
If "acoustic feedback" occurs (a howling or squealing noise from the
speakers) due to close proximity to the speaker, use the microphone in
the direction away from the speaker.
Microphone recording is possible only in normal-speed dubbing. The content
of the recording will be output to the speaker and the recording will begin.
To record your own voice against a backdrop of music from a radio, CD, cas-
sette, insert a blank cassette tape into Deck B and then press REC/Pause.
Note: When using headphones ( Phone)
■ You can listen to music through headphones connected
to a terminal on the top of the product.
■ Headphones are an extra, so if you want to buy one,
please inquire at a Samsung agency.
GB
Page: 15
RADIO
AM(MW)
Frequency range ...........................................................................522 KHz ~ 1611 KHz
Frequency range (option)..............................................................520 KHz ~ 1720 KHz
FM
Frequency range...........................................................................87.5 MHz ~ 108 MHz
COMPACT DISC PLAYER
Frequency response..............................................................................20 Hz ~ 20 KHz
TAPE DECK
Frequency response...........................................................................125 Hz ~ 6.3 KHz
GENERAL
Output power.........................................................................................5 + 5 Watts(4Ω)
Dimensions.....................................................................495(W) x 286(D) x 177(H) mm
32
B
Specifications
31
Problem
The system does not work
There is no sound
The Timer does not work
Incase it is not worked, even
the action is taken as above.
The compact disc player does not
start playing
The tape does not start playing
The volume falls off
The cassette is not erased correctly
There is excessive wow and flutter
Reception is poor or no radio stations
are received at all
G
E
N
E
R
A
L
C
D
R
A
D
I
O
C
A
S
S
E
T
T
E
S
Checks/Explanation
• The mains lead is not correctly plugged into a wall socket
or the wall socket is not switched on.
• The Standby/On button has not been pressed.
• The volume has been completely turned down.
• The correct function (TUNER, CD, TAPE) has not been
selected.
• The loudspeaker wires have been disconnected.
• The timer has been stopped by pressing TIMER .
Press P.SURR button for 5 seconds in power
‘OFF’(standby), then it is returned the original position
(RESET)
• The CD function has not been selected.
• The disc has been inserted face down or is either dirty or
scratched.
• The laser sensor is dirty or dusty.
• The system has not been installed on a flat, horizontal
surface.
• The TAPE function has not been selected.
• The cassette has not been inserted correctly.
• The cassette player has not been closed.
• The tape is either slack or broken.
• The audio heads are dirty.
• The rollers or drive capstans are dirty.
• The tape is worn.
• The TUNER function has not been selected.
• The radio frequency has not been correctly selected.
• The aerial has been disconnected or is not facing the right
way. Turn it until you find the best orientation.
• You are in a building that blocks radio waves; you must
use an outside aerial.
..........
Before Contacting the After-Sales Service
GB
Page: 16
CD CASSETTE
CD-R/RW PLAYBACK
RCD-S70/S70B/S70S
RCD-S75/S75S
Before operating the unit,
please read this manual throughly and
retain it for future reference.
Instruction Manual

Question & answers

There are no questions about the Samsung RCDS70 yet.

Ask a question about the Samsung RCDS70

Have a question about the Samsung RCDS70 but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Samsung RCDS70. Please make sure that you describe your difficulty with the Samsung RCDS70 as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.