Samsung DV151F manual

View a manual of the Samsung DV151F below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Samsung
  • Product: Digital Camera
  • Model/name: DV151F
  • Filetype: PDF
  • Available languages: English

Table of Contents

Page: 1
1 Enter the Settings menu (Methods vary depending on the Model Dial or Menu Key)
Installing i-Launcher
1. Enter the Settings menu. (Methods vary depending on the Model. Dial or Menu Key)
2. Select Connectivity → i-Launcher(PC Software) → On (default “On”)
3. Turn off the camera.
4 Connect the camera to your computer with the USB cable
4. Connect the camera to your computer with the USB cable.
You must plug the small end of the USB cable into your camera. If the cable is reversed, it may
damage your files The manufacturer is not responsible for any loss of data
damage your files. The manufacturer is not responsible for any loss of data.
5. Turn on the camera.
6. When the pop-up window prompts you to install i-Launcher, select Yes.
• If a pop-up window prompting you to run iLinker.exe appears, run it first.
• When you connect the camera to a computer with i-Launcher installed, the
program will launch automatically.
7. Follow the on-screen instructions to complete the installation.
• An i-Launcher shortcut will appear on the computer.
• Before installing the program ensure that the PC is connected to a network
• Before installing the program, ensure that the PC is connected to a network.
• To install i-Launcher on your Mac OS computer, click Devices → i-Launcher → Mac → iLinker.
Page: 2
Available programs when using i-Launcher
Option Description
p p
Multimedia Viewer You can view files with Multimedia Viewer.
Firmware Upgrade You can update the firmware of your camera.
Map Download
Manager
You can download the Map file of your camera. (GPS model only)
i-Launcher provides a link for downloading the PC Auto Backup
h t th t t Y
PC Auto Backup
program when you connect the camera to a computer. You can
send photos or videos that you captured with the camera to a PC
wirelessly.
If you use a Mac OS computer, only Firmware Upgrade and PC Auto Backup are available.
Page: 3
i L h ll l b k fil i h M l i di Vi d id li k d l d
Using i-Launcher
i-Launcher allows you to play back files with Multimedia Viewer and provides a link to download
the PC Auto Backup program.
• The requirements are recommendation only i-Launcher may not work properly even when the
• The requirements are recommendation only. i Launcher may not work properly even when the
computer meets the requirements, depending on the condition of your computer.
• If your computer does not meet the requirements, videos may not play correctly
Windows OS Requirements MAC OS Requirements
Opening i-Launcher
O l S ll S i h S i h
On your computer, select Start → All Programs → Samsung → i-Launcher → Samsung i-Launcher.
On your Mac, click Applications → Samsung → i-Launcher
Page: 4
Multimedia Viewer allows you to play back files. From the Samsung i-Launcher screen, click
Using Multimedia Viewer
Multimedia Viewer allows you to play back files. From the Samsung i Launcher screen, click
Multimedia Viewer
• Multimedia Viewer supports the following formats: - Videos: MP4 (Video: H.264, Audio: AAC),
WMV (WMV 7/8/9) AVI (MJPEG) Photos: JPG GIF BMP PNG TIFF MPO
WMV (WMV 7/8/9), AVI (MJPEG) - Photos: JPG, GIF, BMP, PNG, TIFF, MPO
• Files that have been recorded with other manufacturers’ devices may not play back smoothly.
Viewing
Viewing
Photos
Viewing
Videos
Videos
Page: 5
Updating the firmware
Before upgrading the firmware
Before upgrading the firmware
Before upgrading the firmware
Before upgrading the firmware
1. Make sure you use fully charged batteries. If fully charged batteries are not used, or the power is cut during a
firmware upgrade, the main board may be seriously damaged, resulting in camera malfunction.
If camera malfunction is caused during a firmware upgrade for the reasons given above the main board may
If camera malfunction is caused during a firmware upgrade for the reasons given above, the main board may
have to be serviced by a Samsung service center, which may result in major repair charges.
2. Before upgrading the firmware, make sure that you format the memory card on your PC or camera and then
download the necessary firmware file.
y
3. To upgrade firmware there should be sufficient free space on the memory card for the size of the firmware file.
If the firmware upgrade is not completed because of insufficient memory space, delete some of the files saved
on the memory to secure more free space and then try again. (over 100MB recommended)
4. Do not operate the camera, remove the batteries, or cut the power while upgrading firmware.
Operate the camera only after the firmware upgrade is complete.
5 O th fi i d d it i t ibl t t th li i f th fi
5. Once the firmware is upgraded, it is not possible to restore the earlier version of the firmware.
When the firmware is upgraded, all the camera settings are set to their default values.
Since all the files stored in the internal memory(not Memory card) will be deleted, ensure that files are copied
to other storage devices before upgrading firmware.
6. Before downloading firmware, make sure you read the Software Use Terms Conditions.
The act of downloading the firmware is taken to mean that you have agreed to the Software Use Terms and
Conditions.
※ Should you need further detailed information, or if you experience difficulty in upgrading firmware, do not
proceed with the process on your own. Visit a Samsung service center near you.
Page: 6
How to Upgrade the Firmware
How to Upgrade the Firmware
Updating the firmware
3. Please read precaution before upgrade firmware.
How to Upgrade the Firmware
How to Upgrade the Firmware
1. Connect with Camera and PC via cable and
PC recognize camera
3. Please read precaution before upgrade firmware.
2. From the Samsung i-Launcher screen, click
Firmware Upgrade.
4. Downloading from Server
Page: 7
5 Finish do nloading and disconnect ith camera
Updating the firmware
9 The firmware version will display on the LCD
5. Finish downloading and disconnect with camera 9. The firmware version will display on the LCD
screen. Press and hold the shutter button to
start the firmware update process.
10. The display will show “Firmware is updating...”
Once the firmware update process is
complete, the camera will automatically power
ff
7. Disconnect the Camera from the PC
8. Power On the Camera
off.

Question & answers

How can i turn the sound off a recorded video on my camera?

Published on 10 months ago by Sue

Ask a question about the Samsung DV151F

Have a question about the Samsung DV151F but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Samsung DV151F. Please make sure that you describe your difficulty with the Samsung DV151F as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.