Samsung CW-21M063N manual

View a manual of the Samsung CW-21M063N below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Samsung
  • Product: Television
  • Model/name: CW-21M063N
  • Filetype: PDF
  • Available languages: French, German, English, Dutch

Table of Contents

Page: 0
COLOUR
TELEVISION
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
REMOTE CONTROL
ON-SCREEN MENUS
TELETEXT FUNCTION (depending on the model)
ELECT
KS9A(03120A-01)EU_eng 2/19/04 11:31 AM Page 1
Page: 1
2
ENG
Safety Instructions
Caution
CAUTION: TO PREVENT ELECTRICAL SHOCK, DO
NOT REMOVE REAR COVER, NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN !
CAUTION
The lightning flash and arrow head
within the triangle is a warning sign
alerting you of “dangerous voltage”
inside the product.
The exclamation point within the
triangle is a warning sign alerting
you of important instructions
accompanying the product.
☛ The main voltage is indicated on the rear
of the TV set and the frequency is 50 or
60Hz.
!
WARNING: TO PREVENT DAMAGE WHICH MAY
RESULT IN FIRE OR SHOCK HAZARD. DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
◆ Do not expose the television to extreme temperature conditions or to extreme humidity conditions.
◆ Do not expose the television to direct sunlight and other sources of heat.
◆ Do not expose the television to any liquids.
◆ Never put objects of any kind into the television, and do not place a water-containing vessel on the
television.
◆ During a storm conditions (especially when there is lightning) unplug the television from the mains
socket and aerial.
◆ Do not step on or twist the power cord.
◆ Do not overload wall outlets or extension cords as this can result in a risk of fire or electric shock.
◆ Please use a soft and dry cloth (not containing volatile matter) when you clean the TV.
◆ If the television is broken, do not try to repair it yourself. Contact qualified service personnel.
◆ If the remote control is not used for a long period of time, remove the batteries and store it in a
cool, dry place.
◆ Do not drop the remote control.
This device is not for use in industrial environments.
KS9A(03120A-01)EU_eng 12/8/03 4:42 PM Page 2
Page: 2
3
ENG
Contents
◆ PREPARING YOUR TELEVISION
■ Safety Instructions......................................................................................... 2
■ Caution .......................................................................................................... 2
■ Front Panel Controls (depending on the model)............................................ 4
■ Using the Buttons on the Front Panel............................................................ 4
■ Connection Panels ........................................................................................ 5
■ Infrared Remote Control (All Functions Except Teletext) .............................. 6
■ Infrared Remote Control (Teletext Functions) ............................................... 7
■ Inserting the Batteries in the Remote Control................................................ 8
■ Connecting the Aerial or Cable Television Network ...................................... 8
■ Switching Your Television On and Off........................................................... 9
■ Placing Your Television in Standby mode..................................................... 9
■ Plug & Play Feature (depending on the model)............................................. 10
■ Choosing Your Language.............................................................................. 11
◆ SETTING UP THE CHANNELS
■ Storing the Channels Automatically............................................................... 12
■ Selecting a Channel Numbered Ten or Over ................................................ 12
■ Storing the Channels Manually...................................................................... 13
■ Skipping Unwanted Channels ....................................................................... 14
■ Fine tuning Channel Reception ..................................................................... 15
■ Sorting the Stored Channels ......................................................................... 16
◆ USING THE TELEVISION
■ Changing the Picture Standard ..................................................................... 17
■ Selecting the Picture Format (depending on the model) ............................... 17
■ Adjusting the Picture Settings ....................................................................... 18
■ Changing the Sound Standard (depending on the model) ............................ 19
■ Adjusting the Sound Settings (depending on the model) .............................. 20
■ Adjusting the Volume..................................................................................... 20
■ Extra Sound Settings (depending on the model)
(Auto Volume/Melody/Pseudo Stereo/Turbo Sound) .................................... 21
■ Selecting the Sound Mode (depending on the model) .................................. 22
■ Switching the Sound Off Temporarily............................................................ 23
■ Setting the Sleep Timer................................................................................. 24
■ Setting and Displaying the Current Time (depending on the model)............. 25
■ Switching the Television On and Off Automatically (depending on the model)... 26
■ Activating the Child Lock ............................................................................... 27
■ Setting the Blue Screen Mode....................................................................... 28
■ Using the LNA (Low Noise Amplifier) feature (depending on the model)...... 28
◆ USING THE TELETEXT FUNCTION (depending on the model)
■ Teletext Decoder (depending on the model) ................................................. 29
■ Displaying Teletext Information (depending on the model) ........................... 29
■ Selecting a Specific Teletext Page (depending on the model)...................... 30
■ Using FLOF to Select a Teletext Page (depending on the model)................ 31
■ Storing Teletext Pages (depending on the model) ........................................ 32
◆ INFORMATION ON CONNECTIONS AND RECOMMENDATIONS FOR USE
■ Viewing Picture From External Sources........................................................ 32
■ Connecting to the Audio/Video Input/Outputs ............................................... 33
■ Automatic Degaussing to Remove Color Patches......................................... 34
■ Troubleshooting: Before Contacting Service Personnel................................ 34
■ Wiring the Mains Power Supply Plug (UK Only)............................................ 35
☛ ➢
Symbols
Press Important Note
KS9A(03120A-01)EU_eng 12/8/03 4:42 PM Page 3
Page: 3
4
ENG
Front Panel Controls (depending on the model)
➣ Buttons and markings are subject to change.
Using the Buttons on the Front Panel
If your remote control no longer works or you have lost it, you can
use the controls on the front panel of the television to:
◆ Switch on the television when it is in Standby mode and
select channels ( or C/P. )
◆ Access the main menu ( )
◆ Adjust the volume ( )
Buttons on the front panel have the same function as corresponding
buttons on the remote control.
ΠMENU DISPLAY
´ VOLUME ADJUSTMENT
ˇ CHANNEL SELECTION
¨ REMOTE CONTROL SENSOR
ˆ STAND-BY INDICATOR
Ø POWER
KS9A(03120A-01)EU_eng 2/19/04 11:31 AM Page 4
Page: 4
5
ENG
Connection Panels
➢ The actual configuration on your TV may be different, depending on
your model.
Rear of TV
A) SCART AUDIO/VIDEO INPUT/OUTPUT CONNECTOR
B) 75Ω COAXIAL CONNECTOR FOR AERIAL/CABLE NETWORK
C) RCA AUDIO/VIDEO INPUT/OUTPUT CONNECTORS
RCA AUDIO/VIDEO INPUT
CONNECTORS
Front (or Side) of TV
➢ Connecting earphones ( ) /headphones ( )
◆ You can connect a set of earphones/headphones to your television if you wish to watch a
television programme without disturbing the other people in the room.
◆ Prolonged use of earphones/headphones at a high volume may damage your hearing.
OUTPUT
INPUT
VIDEO AUDIO
OUTPUT
INPUT
VIDEO AUDIO
INPUT
MONITOR
-OUT
VIDEO AUDIO
INPUT
MONITOR
-OUT
VIDEO
(MONO)
L-AUDIO-R
B
A
C
C B
C
B
C
B B
KS9A(03120A-01)EU_eng 2/19/04 11:31 AM Page 5
Page: 5
6
ENG
Infrared Remote Control (All Functions Except Teletext)
➣ Operation of remote control may be affected by bright artificial light near to the TV set.
➣ Buttons and markings are subject to change.
POWER
SOUND MENU DISPLAY
(OPTION)
ONE/TWO-DIGIT CHANNEL
SELECTION
TURBO SOUND ON/PLUS/OFF
(OPTION)
TEMPORARY SOUND SWITCH-
OFF
VOLUME DECREASE PREVIOUS CHANNEL
DIRECT CHANNEL SELECTION
TUNER/CABLE NETWORK
SELECTION
EXTERNAL INPUT SELECTION
ON-SCREEN DISPLAY
AUTOMATIC SWITCH-OFF
PICTURE SIZE
NEXT CHANNEL
VOLUME INCREASE
PICTURE STANDARD
SOUND STANDARD (OPTION)
SOUND MODE SELECTION
(OPTION)
MENU DISPLAY/
LNA : Low Noise Amplifier
(depending on the model)
MOVE TO THE REQUIRED MENU
OPTION/
ADJUST AN OPTION VALUE
RESPECTIVELY
SWITCH REPEATEDLY
BETWEEN THE LAST TWO
CHANNELS DISPLAYED
EXIT FROM ANY DISPLAY
CHANGE CONFIRMATION
KS9A(03120A-01)EU_eng 2/19/04 11:31 AM Page 6
Page: 6
7
ENG
Infrared Remote Control (Teletext Functions)
➣ Buttons and markings are subject to change.
TELETEXT HOLD
FASTEXT TOPIC SELECTION
TELETEXT NEXT PAGE
TELETEXT PREVIOUS PAGE
TELETEXT DISPLAY/MIX
LIST/FLOF MODE SELECTION
TELETEXT REVEAL
TELETEXT STORE
TELETEXT SIZE SELECTION
PROGRAMME SELECTION
BY NAME/
LNA : Low Noise Amplifier
(depending on the model)
TELETEXT SUB-PAGE
KS9A(03120A-01)EU_eng 2/19/04 11:31 AM Page 7
Page: 7
8
ENG
You must insert or replace the batteries in the remote control when
you :
◆ Purchase the television.
◆ Find that the remote control is no longer operating
correctly.
1 Remove the cover of the remote control by pressing the symbol
( ) and pulling the cover in the direction of the arrow.
2 Insert batteries, taking care to respect the polarities:
◆ + on the battery with + on the remote control
◆ - on the battery with - on the remote control
3 Replace the cover by pushing it in the direction of the arrow.
To view television channels correctly, a signal must be received by
the set from one of the following sources:
◆ An outdoor aerial
◆ A cable television network
◆ A satellite network
Plug the aerial or cable network input cable to the 75Ω coaxial socket
on the rear of the television.
Inserting the Batteries in the Remote Control
Connecting the Aerial or Cable Television Network
75Ω
Cable
Television
Network
or
Rear of TV
KS9A(03120A-01)EU_eng 2/19/04 11:31 AM Page 8
Page: 8
9
ENG
The mains lead is attached to the rear of the television.
☛ If you have purchased this television in the United
Kingdom, refer to page 35 for further instructions on
plug wiring.
1 Plug the mains lead into an appropriate socket.
➢ The main voltage is indicated on the rear of the TV set and
the frequency is 50 or 60Hz.
2 Press the “ ” (ON/OFF) button on the front of the television.
Result: The Standby indicator lights up on the front panel.
3 Press the POWER ( ) button on the remote control to switch the
television on.
Result: The programme that you were watching last is re-
selected automatically.
4 To switch your television off, press the “ ” (ON/OFF) button again
on the front of the television.
Placing Your Television in Standby mode
Your television can be placed in Standby mode, in order to reduce:
◆ Power consumption
◆ Wear of the cathode ray tube
The Standby mode can be useful when you wish to interrupt
viewing temporarily (during a meal, for example).
The television is placed automatically in Standby mode when you
turn it on.
1 Press the POWER ( ) button on the remote control.
Result: The screen is turned off and the Standby indicator on
the front of the television lights up.
2 To switch the screen back on, simply press the POWER ( ) button
again on the remote control.
➣ You can also switch on by pressing the P or button.
➣ Do not leave your television in standby mode for long
periods of time (when you are away on holiday, for example).
In this case, you should switch it off completely.
Switching Your Television On and Off
KS9A(03120A-01)EU_eng 2/19/04 11:31 AM Page 9
Page: 9
10
ENG
Plug & Play Feature (depending on the model)
When the television is initially powered ON, three basic customer
settings proceed automatically and subsequently: setting the
language, channel and clock.
1 If the television is in Standby mode, press the POWER ( ) button
on the remote control.
Result: The message Plug & Play is displayed. It flickers for a
little while and then the “Language” menu is automatically
displayed.
2 Press the ▲ or ▼ button to select required language. Press the
MENU ( ) button to enter the language, and then the message
Ant. Input : Check is displayed.
➣ If any language is not selected on the Language menu, the
“Language” menu will be displayed about 30 seconds later.
3 Make sure that the antenna is connected to the TV. And then press
the œ or √ button to store the channels (refer to “Storing the
Channels Automatically” on page 12).
Result: The horizontal bar is displayed, and then channels are
stored in an order which reflects their positions in the
frequency range.
4 When searching and storing is complete, the Time menu is
displayed.
5 Press the œ or √ button to move to the hour or minute. Set the
hour or minute by pressing the ▲ or ▼ button (refer to “Setting and
Displaying the Current Time” on page 25).
6 When you have finished, press the MENU ( ) button.
Result: The message ENJOY YOUR WATCHING is displayed, and
then the channel which has been stored will be
activated.
7 If you want to reset this feature...
1 Press the MENU ( ) button.
2 Press the ▲ or ▼ button to select the Function, and then
press the œ or √ button.
3 Select the Plug & Play by pressing the ▲ or ▼ button, and
then press the œ or √ button.
Result: The message Plug & Play is displayed.
Function
Language : English
Time √
Plug & Play √
Blue Screen : Off
Child Lock √
Plug & Play
ENJOY YOUR WATCHING
Select Enter Exit
P 1
471 MHz 48 %
Ant. Input : Check
Auto Store Exit
Time
Clock 11 : 35
Move Exit
Exit
KS9A(03120A-01)EU_eng 2/19/04 11:31 AM Page 10
Page: 10
11
ENG
Choosing Your Language
When you start using your television for the first time, you must
select the language which will be used for displaying menus and
indications.
1 Press the MENU ( ) button.
2 Press the ▲ or ▼ button to select the Function.
3 Press the œ or √ button to select the Language.
4 Select a particular language by pressing the œ or √ button
repeatedly.
5 When you have finished, press the EXIT ( ) button or press the
MENU ( ) button repeatedly to return to normal viewing.
Picture
Mode œ
œ Custom √
Adjust √
Size : Normal
Select Enter Exit
Function
Language : English
Time √
Plug & Play √
Blue Screen : Off
Child Lock √
Select Adjust Exit
KS9A(03120A-01)EU_eng 2/19/04 11:31 AM Page 11
Page: 11
12
ENG
Storing the Channels Automatically
Selecting a Channel Numbered Ten or Over
When using the numeric buttons to select a channel stored at
programme position ten or higher, follow the instructions below.
1 Press the -/-- button.
Result: The “--” symbol is displayed.
2 Enter the two-digit channel number.
Example: To select channel 42, press 4, followed by 2.
You can scan the frequency ranges available on your television and
in your country and store all the channels found automatically.
The channels are stored in the order in which they appear in the
frequency bands. It is possible that the automatically allocated
numbers may not correspond to those by which you wish to
identify the channels. If this is the case, refer to “Sorting the Stored
Channels” on page 16.
1 Press the MENU ( ) button.
2 Press the ▲ or ▼ button to select the Channel.
3 Press the œ or √ button to select the Auto Store.
4 Press the œ or √ button again.
Result: The horizontal bar is displayed, and then channels are
stored in an order which reflects their positions in the
frequency range. Finally, the search will end automatically.
5 When searching and storing is complete, the Sort menu is
displayed.
To... Then...
Sort the stored channels Go to Step 4 of the “Sorting
into the desired numerical order the Stored Channels”
procedure on page 16.
Exit the channel store function Press the MENU ( )
sorting the channels button without repeatedly
until the menus disappear.
➣ If sound does not work regularly after storing channels, select
the sound system which best corresponds in Manual Store
menu (refer to the opposite page).
Picture
Mode œ
œ Custom √
Adjust √
Size : Normal
Select Enter Exit
Channel
Auto Store √
Manual Store √
Add/Erase √
Fine Tune √
Sort √
Select Enter Exit
Channel
Sort
From : P 1
To : P--
Store : ?
Select Adjust Exit
P 1
471 MHz 48 %
Exit
KS9A(03120A-01)EU_eng 2/19/04 11:31 AM Page 12
Page: 12
13
ENG
When storing channels manually, you can choose:
◆ Whether or not to store each of the channels found.
◆ The number by which you wish to identify each stored
channel.
1 Press the MENU ( ) button.
2 Press the ▲ or ▼ button to select the Channel and press the œ or
√ button.
3 Press the ▲ or ▼ button to select the Manual Store and press the
œ or √ button.
Result: The Manual Store menu is displayed with the Color
System selected.
4 Press the œ or √ button repeatedly until the color is of the best
quality.
Result: The Color System is changed (depending on the
model).
AUTO ➞ PAL ➞ SECAM ➞ NTSC4.43
➣ NTSC4.43 is a “trick” playback mode used by
special VCR’s to play PAL-recorded videos in
NTSC mode.
5 Press the ▲ or ▼ button to select the Sound System and press the
œ or √ button repeatedly until the sound is of the best quality.
Result: The Sound System is changed (depending on the
model).
B/G ➞ D/K ➞ I ➞ L/L’ (option)
➣ If sound does not work regularly after storing
channels, select the sound system which best
corresponds.
6 To start the search, select the Search and then press the œ or √
button.
Result: The tuner scans the frequency range until the first
channel or the channel that you selected is received on
your screen.
7 To assign a programme number to the channel, select the
Prog.No.. Press the œ or √ button until you find the correct
number.
8 To store the channel and associated programme number, select
the Store and press the œ or √ button.
Result: OK is displayed.
9 Repeat Steps 6 to 8 for each channel to be stored.
10 When you have finished manual storage, press the EXIT ( )
button or press the MENU ( ) button repeatedly to return to
normal viewing.
Storing the Channels Manually
➞
➞
Channel
Auto Store √
Manual Store √
Add/Erase √
Fine Tune √
Sort √
Select Enter Exit
Channel
Manual Store
Color System : AUTO
Sound System : B/G
Search : -/+
Prog.No. : 18
Store : ?
Select Adjust Exit
Channel
Manual Store
Color System : AUTO
Sound System : B/G
Search : -/+
Prog.No. : 18
Store : ?
Select Adjust Exit
Channel
Manual Store
Color System : AUTO
Sound System : B/G
Search : -/+
Prog.No. : 18
Store : ?
Select Adjust Exit
Channel
Manual Store
Color System : AUTO
Sound System : B/G
Search : -/+
Prog.No. : 18
Store : ?
Select Adjust Exit
Channel
Manual Store
Color System : AUTO
Sound System : B/G
Search : -/+
Prog.No. : 18
Store : OK
Select Adjust Exit
KS9A(03120A-01)EU_eng 2/19/04 11:31 AM Page 13
Page: 13
You can exclude the channels of your choice from the channel scan
operation. When you scan through the stored channels, those you
have chosen to skip are not displayed.
All channels that you do not specifically choose to skip are
displayed during scanning.
1 Press the MENU ( ) button.
2 Press the ▲ or ▼ button to select the Channel and press the œ or
√ button.
3 Press the ▲ or ▼ button to select the Add/Erase and press the œ
or √ button.
Result: The Add/Erase menu is displayed.
4 Press the ▲ or ▼ button to select the required channel.
5 To add or erase the desired channel by pressing the œ or √ button.
6 When you have finished adding and erasing channels, press the
EXIT ( ) button or press the MENU ( ) button repeatedly to
return to normal viewing
14
ENG
Skipping Unwanted Channels
Channel
Auto Store √
Manual Store √
Add/Erase √
Fine Tune √
Sort √
Select Enter Exit
Channel
Add/Erase
P 1 : Added
P 2 : Added
P 3 : Added
P 4 : Added
Select Adjust Exit
Channel
Add/Erase
P 1 : Erased
P 2 : Added
P 3 : Added
P 4 : Added
Select Adjust Exit
KS9A(03120A-01)EU_eng 2/19/04 11:31 AM Page 14
Page: 14
15
ENG
If the reception is clear, you do not have to fine-tune the channel,
as this is done automatically during the search and store operation.
If however the signal is weak or distorted, you may have to fine-
tune the channel manually.
1 Press the MENU ( ) button.
2 Press the ▲ or ▼ button to select the Channel and press the œ or
√ button.
3 Press the ▲ or ▼ button to select the Fine Tune and press the œ
or √ button.
Result: The Fine Tune menu is displayed with the Tune
selected.
4 To... Press the...
obtain a sharp and ◆ œ or √ button.
clear picture and Result: The horizontal bar’s
good sound quality cursor moves to the left
or right.
memorise adjusted ◆ ▲ or ▼ button to select the Store.
picture or sound ◆ œ or √ button.
Result: OK is displayed.
erase adjusted ◆ ▲ or ▼ button to select the Erase.
picture or sound ◆ œ or √ button.
Result: OK is displayed.
5 When you have finished, press the EXIT ( ) button or press the
MENU ( ) button repeatedly to return to normal viewing.
Fine tuning Channel Reception
Channel
Auto Store √
Manual Store √
Add/Erase √
Fine Tune √
Sort √
Select Enter Exit
Channel
Fine Tune
Tune : -/+
Store : ?
Erase : ?
Select Adjust Exit
Channel
Fine Tune
Tune : -/+
Store : OK
Erase : ?
Select Adjust Exit
Channel
Fine Tune
Tune : -/+
Store : ?
Erase : OK
Select Adjust Exit
Fine Tune
KS9A(03120A-01)EU_eng 2/19/04 11:31 AM Page 15
Page: 15
You can exchange the numbers of two channels, in order to:
◆ Modify the numeric order in which the channels have
been automatically stored.
◆ Give easily remembered numbers to the channels that
you watch most often.
1 Press the MENU ( ) button.
2 Press the ▲ or ▼ button to select the Channel and press the œ or
√ button.
3 Press the ▲ or ▼ button to select the Sort and press the œ or √
button.
Result: The Sort menu is displayed with the From selected.
4 Press the œ or √ button until the channel number that you wish to
change is displayed.
Result: The selected channel’s picture is displayed.
5 Press the ▲ or ▼ button to select the To.
6 Press the œ or √ button until the new number by which you wish to
identify the channel is displayed.
Result: The selected channel is exchanged with the one
previously stored to the chosen number.
Example: If you select P 1 for the From and P 3 for the To:
◆ Channel 1 becomes channel 3.
◆ Channel 3 becomes channel 1.
7 To... Press the...
Confirm the exchange ◆ ▲ or ▼ button to select the Store.
of channel numbers ◆ œ or √ button.
Result: OK is displayed.
➣ You can exchange other
channel numbers by selecting
From and returning to step 4.
8 When you have finished sorting channels, press the EXIT ( )
button or press the MENU ( ) button repeatedly to return to
normal viewing
16
ENG
Sorting the Stored Channels
Channel
Auto Store √
Manual Store √
Add/Erase √
Fine Tune √
Sort √
Select Enter Exit
Channel
Sort
From : P 1
To : P--
Store : ?
Select Adjust Exit
Channel
Sort
From : P 1
To : P 3
Store : ?
Select Adjust Exit
Channel
Sort
From : P 3
To : P 1
Store : OK
Select Adjust Exit
KS9A(03120A-01)EU_eng 2/19/04 11:31 AM Page 16
Page: 16
17
ENG
You can select the type of picture which best corresponds to your
viewing requirements. The following picture effects are available in
the order given:
◆ Custom, Standard, Sports, Natural, Mild.
1 Press the MENU ( ) button.
Result: The Picture menu is displayed.
2 Press the œ or √ button.
Result: The Mode menu is selected.
3 Select to satisfy your preference by pressing the œ or √ button.
4 When you have been finished, press the EXIT ( ) button or press
the MENU ( ) button repeatedly to return to normal viewing.
➣ You can select the required picture effect by simply
pressing the “P.MODE” (Picture Mode) button on the
remote control.
Changing the Picture Standard
Selecting the Picture Format (depending on the model)
You can select the picture format which best corresponds to your
viewing requirements. The following picture formats are available
in the order given:
◆ Normal
◆ Zoom (expansion of a 16:9 picture to full screen format)
◆ 16:9
1 Press the MENU ( ) button.
Result: The Picture menu is displayed.
2 Press the œ or √ button.
3 Press the ▲ or ▼ button to select the Size.
4 Select to satisfy your preference by pressing the œ or √ button.
5 When you have been finished, press the EXIT ( ) button or press
the MENU ( ) button repeatedly to return to normal viewing.
➣ You can select the required picture format by simply
pressing the “P.SIZE( )” (Picture Size) button on the
remote control.
Picture
Mode œ
œ Custom √
Adjust √
Size : Normal
Select Adjust Exit
Picture
Mode œ
œ Custom √
Adjust √
Size : Normal
Select Adjust Exit
KS9A(03120A-01)EU_eng 2/19/04 11:31 AM Page 17
Page: 17
18
ENG
Adjusting the Picture Settings
Your television has several settings which allow you to control picture
quality:
◆ Color Tone, Contrast, Brightness, Sharpness, Color, Tint
(NTSC only)
1 Press the MENU ( ) button.
Result: The Picture menu is displayed.
2 Press the œ or √ button.
3 Press the ▲ or ▼ button to select the Adjust, and then press the œ
or √ button.
Result: When select the Mode to Custom, the Adjust menu is
displayed.
4 To adjust the... Press the...
◆ Color Tone ◆ œ or √ button.
Result: You select the required option
(Normal, Warm1/2, Cool1/2).
◆ Contrast ◆ œ or √ button.
◆ Brightness Result: The horizontal bar is displayed.
◆ Sharpness
◆ Color
◆ Tint (NTSC only)
5 When you are satisfied with the settings, press the EXIT ( ) button
or press the MENU ( ) button repeatedly to return to normal
viewing.
➣ The television has an “automatic degaussing” system that is
activated if magnetic interference is present. To degauss the
television screen, switch power off by pressing the “ ”
(ON/OFF) button on the front panel (refer to “Automatic
Degaussing to Remove Color Patches” on page 34).
➣ If you make any changes to the Adjust settings, the picture
standard is automatically switched to Custom.
Picture
Mode œ
œ Custom √
Adjust √
Size : Normal
Select Enter Exit
Picture
Adjust
Color Tone : Normal
Contrast 90
Brightness 50
Sharpness 50
Color 50
Select Adjust Exit
Picture
Adjust
Color Tone : Normal
Contrast 90
Brightness 50
Sharpness 50
Color 50
Select Adjust Exit
Contrast 91
KS9A(03120A-01)EU_eng 2/19/04 11:31 AM Page 18
Page: 18
You can select the type of special sound effect to be used when
watching a given broadcast. The following sound effects are
available in the order given:
◆ Custom, Standard, Music, Movie, Speech.
1 Press the MENU ( ) button.
2 Press the ▲ or ▼ button to select the Sound and press the œ or √
button.
Result: The Mode menu is selected.
3 Select to satisfy your preference by pressing the œ or √ button.
4 When you have been finished, press the EXIT ( ) button or press
the MENU ( ) button repeatedly to return to normal viewing.
➣ You can select the required sound effect by simply pressing
the “S.MODE” (Sound Mode) button on the remote
control.
19
ENG
Changing the Sound Standard (depending on the model)
Sound
Mode œ
œ Custom √
Adjust √
Auto Volume : Off
Melody : On
Pseudo Stereo : Off
Turbo Sound : Off
Select Adjust Exit
KS9A(03120A-01)EU_eng 2/19/04 11:31 AM Page 19
Page: 19
20
ENG
Adjusting the Sound Settings (depending on the model)
The sound settings can be adjusted to suit your personal preferences.
1 Press the MENU ( ) button.
2 Press the ▲ or ▼ button to select the Sound and press the œ or √
button.
3 Press the ▲ or ▼ button to select the Adjust and press the œ or √
button.
Result: When select the Mode to Custom, the Adjust menu is
displayed.
4 Select the required option by pressing the ▲ or ▼ button and
adjust to satisfy your preference by pressing the œ or √ button.
5 Press the œ or √ button.
Result: The horizontal bar is displayed.
6 When you are satisfied with the settings, press the EXIT ( ) button
or press the MENU ( ) button repeatedly to return to normal
viewing.
➢ You can display the sound adjust menu directly by pressing
the “S.MENU” (Sound menu) button on the remote control.
Adjusting the Volume
You can adjust the volume by pressing the or button on the
remote control.
◆ Press the button to increase the volume.
(cursor moves to the right)
◆ Press the button to decrease the volume.
(cursor moves to the left)
➣ The volume setting is retained:
◆ When you switch the television to standby mode
◆ When you switch the television off using the “ ”
(ON/OFF) button on the front panel
◆ If there is a power failure.
Sound
Mode œ
œ Custom √
Adjust √
Auto Volume : Off
Melody : On
Pseudo Stereo : Off
Turbo Sound : Off
Select Enter Exit
Sound
Adjust
Bass 50
Treble 50
Balance L 50 R 50
Select Adjust Exit
Balance L 49 R 51
KS9A(03120A-01)EU_eng 2/19/04 11:31 AM Page 20
Page: 20
21
ENG
Extra Sound Settings (depending on the model)
The following sound settings can be adjusted to suit your personal
preferences.
◆ Auto Volume
Each broadcasting station has its own signal conditions,
and so it is not easy for you to adjust the volume every
time the channel is changed. Auto Volume lets you
automatically adjust the volume of the desired channel by
lowering the sound output when the modulation signal is
high or by raising the sound output when the modulation
signal is low.
◆ Melody
You can hear clear melody sound when the TV is
powered ON or OFF.
◆ Pseudo Stereo
Pseudo Stereo converts a monaural sound signal into
two identical left and right channels.
Once the Pseudo Stereo is set to On or Off, the setting
applies to the sound effects such as Standard, Music,
Movie and Speech.
◆ Turbo Sound
You can enjoy more magnificent and dynamic sound
when watching music, movie or other channel. Turbo
Sound suitably emphasizes both higher and lower bands
of sound (and includes other effects).
1 Press the MENU ( ) button.
2 Press the ▲ or ▼ button to select the Sound and press the œ or √
button.
3 To... Press the...
Change an option ▲ or ▼ button.
Select the required option (On/Off) œ or √ button.
4 When you are satisfied with the settings, press the EXIT ( )
button or press the MENU ( ) button repeatedly to return to
normal viewing.
➢ You can select the turbo sound by simply pressing the
“TURBO” button on the remote control.
Sound
Mode œ
œ Custom √
Adjust √
Auto Volume : On
Melody : On
Pseudo Stereo : Off
Turbo Sound : Off
Select Adjust Exit
Sound
Mode œ
œ Custom √
Adjust √
Auto Volume : Off
Melody : On
Pseudo Stereo : Off
Turbo Sound : Off
Select Adjust Exit
Sound
Mode œ
œ Custom √
Adjust √
Auto Volume : Off
Melody : On
Pseudo Stereo : On
Turbo Sound : Off
Select Adjust Exit
Sound
Mode œ
œ Custom √
Adjust √
Auto Volume : Off
Melody : On
Pseudo Stereo : Off
Turbo Sound : On
Select Adjust Exit
KS9A(03120A-01)EU_eng 2/19/04 11:31 AM Page 21
Page: 21
22
ENG
The “DUAL I-II” button displays/controls the processing and
output of the audio signal. When power is switched ON, the mode
is automatically preset to either “Dual-I” or “STEREO”, depending
on the current transmission.
Selecting the Sound Mode (depending on the model)
➣ ◆ If the receiving conditions deteriorate, listening will be
easier if the mode is set to the MONO position using the
DUAL I-II button.
◆ If the stereo signal is weak (or if intermittent Stereo-Mono)
and automatic switching occurs, then switch to the MONO
mode.
◆ When receiving mono sound in the AV mode, connect to
the “L” input jack on the panels. If the mono sound
comes out only from the left speaker, then press the
DUAL I-II button.
Type of broadcast
Regular broadcast
(Standard audio)
Regular +
NICAM Mono
NICAM Stereo
NICAM Dual-I/II
Regular broadcast
(Standard audio)
Bilingual or Dual-I/II
Stereo
On-screen indication
MONO (Normal use)
MONO ↔ MONO
NICAM (Normal)
STEREO ↔ MONO
NICAM (Normal)
MONO (Normal use)
Dual-I ↔ Dual-II
STEREO ↔ MONO
(Forced Mono)
Dual-I → Dual-II → MONO
NICAM NICAM (Normal)
NICAM
Stereo
A2
Stereo
→
→
KS9A(03120A-01)EU_eng 2/19/04 11:31 AM Page 22
Page: 22
23
ENG
You can switch the sound off temporarily, for example you may
wish to answer the telephone.
1 Press the MUTE ( ) button.
Result: The sound is switched off and “ ” is displayed.
2 When you wish to turn the sound back on at the same volume as
before, press the MUTE ( ) button again (or either of the volume
buttons).
Switching the Sound Off Temporarily
KS9A(03120A-01)EU_eng 2/19/04 11:31 AM Page 23
Page: 23
24
ENG
Setting the Sleep Timer
You can select a time period of between 30 and 180 minutes after
which the television automatically switches to Standby mode by
pressing the “SLEEP ( )” button.
1 Press the SLEEP ( ) button on the remote control.
Result:
If the sleep timer is... The screen displays...
Already set Time remaining before the television
will be placed in standby mode.
Not yet set Word Off.
2 Press the SLEEP ( ) button repeatedly and cycle through the
preset time intervals (30, 60, 90, 120, 150, 180).
Result: The television automatically switches to standby mode
when the timer reaches 0.
3 To cancel the sleep timer function, press the SLEEP ( ) button
repeatedly and select Off.
KS9A(03120A-01)EU_eng 2/19/04 11:31 AM Page 24
Page: 24
You can set the television’s clock so that the current time is displayed
when you press the “INFO ( )” button. You must also set the time
if you wish to use the automatic On/Off timers.
➣ The clock setting will be re-activated when pressing the
“ ” (ON/OFF) button on the front panel.
1 Press the MENU ( ) button.
2 Press the ▲ or ▼ button to select the Function and press the œ or
√ button.
3 Press the ▲ or ▼ button to select the Time, and press the œ or √
button.
Result: The Time menu is displayed with the Clock selected.
4 To... Press the...
Move to the hour or minute œ or √ button.
Set the hour or minute ▲ or ▼ button.
5 When you have finished, press the EXIT ( ) button or press the
MENU ( ) button repeatedly to return to normal viewing.
6 To display the... Press the “INFO ( )” button...
Channel information Once.
Current time Twice.
7 To remove the display, press the INFO ( ) button again.
25
ENG
Setting and Displaying the Current Time(depending on the model)
Function
Language : English
Time √
Plug & Play √
Blue Screen : Off
Child Lock √
Select Enter Exit
Function
Time
Clock 12 : 00
Timer Off
Adjust Move Exit
KS9A(03120A-01)EU_eng 2/19/04 11:31 AM Page 25
Page: 25
26
ENG
SwitchingtheTelevisionOnandOffAutomatically(dependingonthemodel)
You can set the On/Off timers so that the television will:
◆ Switch on automatically and tune to the channel of your
choice at the time you select
◆ Switch off automatically at the time you select
➣ The first step is to set the television’s clock (refer to
“Setting and Displaying the Current Time” on the
previous page). If you have not yet set the clock, the
message “Set the clock first” is displayed.
1 Press the MENU ( ) button.
2 Press the ▲ or ▼ button to select the Function and press the œ or
√ button.
3 Press the ▲ or ▼ button to select the Time, and press the œ or √
button.
Result: The Time menu is displayed.
4 Press the ▲ or ▼ button to select the Timer.
5 Press the œ or √ button to set the mode to On.
Result: The On time and Off time options are displayed.
6 Press the ▲ or ▼ button to select the On time.
7 Set the time at which you wish the television to be switched On.
To... Press the...
Move to the hour or minute œ or √ button.
Adjust the hour or minute ▲ or ▼ button.
8 In the same way, set the time at which you wish the television to be
switched Off.
9 When you have finished setting the On/Off time, press the EXIT
( ) button or press the MENU ( ) button repeatedly to return to
normal viewing.
➣ Absent Power Off
When you set the timer “On”, your television will
eventually be turned off, if you do not operate any controls
during the 3 hours after the TV is turned on by timer.
This function is available in only the timer “On” mode and
will prevent a leakage accident or overheating, caused by
your TV left on for a long time due to the timer “On”
(when you are away on holiday, for example).
Function
Language : English
Time √
Plug & Play √
Blue Screen : Off
Child Lock √
Select Enter Exit
Function
Time
Clock 11 : 35
Timer Off
Select Adjust Exit
Function
Time
Clock 11 : 35
Timer On
On time - - : - -
Off time - - : - -
Select Adjust Exit
Function
Time
Clock 11 : 35
Timer On
On time 07 : 00
Off time - - : - -
Select Adjust Exit
Function
Time
Clock 11 : 35
Timer On
On time 07 : 00
Off time 23 : 00
Select Adjust Exit
KS9A(03120A-01)EU_eng 2/19/04 11:31 AM Page 26
Page: 26
27
ENG
You can restrict viewing by locking the channels of your choice.
Example: You can prevent your children from watching
unsuitable programmes.
1 Press the MENU ( ) button.
2 Press the ▲ or ▼ button to select the Function and press the œ or
√ button.
3 Press the ▲ or ▼ button to select the Child Lock and press the œ
or √ button.
Result: The Child Lock menu is displayed.
4 Set to On by pressing the œ or √ button.
➣ If you want to unlock a channel, set to Off.
5 Press the ▲ or ▼ button to select the Prog.No.. Select the number
of the channel to be locked by pressing the œ or √ button.
6 Press the ▲ or ▼ button to select the Lock and press the œ or √
button.
Result: Locked is displayed.
7 When you have finished, press the EXIT ( ) button or press the
MENU ( ) button repeatedly to return to normal viewing.
➣ If any channel is locked, you can not enter the Channel
menu by using the control buttons on the television, and
the message “Not available” is displayed. You can access
by using the remote control only.
Activating the Child Lock
Child Lock : Locked
P 1
Function
Language : English
Time √
Plug & Play √
Blue Screen : Off
Child Lock √
Select Enter Exit
Function
Child Lock
Child Lock : Off
Select Adjust Exit
Function
Child Lock
Child Lock : On
Prog.No. : 1
Lock : ?
Select Adjust Exit
Function
Child Lock
Child Lock : On
Prog.No. : 1
Lock : Locked
Select Adjust Exit
KS9A(03120A-01)EU_eng 2/19/04 11:31 AM Page 27
Page: 27
28
ENG
Setting the Blue Screen Mode
If no signal is being received or the signal is very weak, a blue
screen automatically replaces the noisy picture background.
If you wish to continue viewing the poor picture, you must set the
Blue Screen mode to Off.
1 Press the MENU ( ) button.
2 Press the ▲ or ▼ button to select the Function and press the œ or
√ button.
3 Press the ▲ or ▼ button to select the Blue Screen.
4 Press the œ or √ button to select the required option (On/Off).
5 When you are satisfied with the settings, press the EXIT ( )
button or press the MENU ( ) button repeatedly to return to
normal viewing.
Function
Language : English
Time √
Plug & Play √
Blue Screen : On
Child Lock √
Select Adjust Exit
Using the LNA (Low Noise Amplifier) feature (depending on the model)
This function is very useful in the situation that the TV is used in
weak signal. LNA amplifies the TV signal in the weak signal area,
but not noise.
1 Press the MENU ( ) button.
2 Press the ▲ or ▼ button to select the Function and press the œ or
√ button.
3 Press the ▲ or ▼ button to select the Low Noise Amplifier.
4 Press the œ or √ button to select the required option (On/Off).
5 When you are satisfied with the settings, press the EXIT ( )
button or press the MENU ( ) button repeatedly to return to
normal viewing.
Function
Language : English
Time √
Plug & Play √
Blue Screen : Off
Child Lock √
Low Noise Amplifier : On
Select Adjust Exit
KS9A(03120A-01)EU_eng 2/19/04 11:31 AM Page 28
Page: 28
29
ENG
Most television channels carry “teletext,” pages of written
information that provide information such as:
◆ Television programme times
◆ News bulletins
◆ Weather forecasts
◆ Sports results
◆ Subtitles for the hard of hearing
The teletext pages are organized according to six categories:
Part Contents
A Selected page number.
B Broadcasting station identity.
C Current page number or search status
D Date and time.
E Text.
F Status information.
You can display teletext information at any time, but signal
reception must be good. Otherwise:
◆ Information may be missing
◆ Some pages may not be displayed
To activate the teletext mode and display the contents page:
1 Using the ( ) or ( ) button, select the channel
providing the teletext service.
2 Press the TTX/MIX ( ) button to activate the teletext mode.
Result: The contents page (page 100) is displayed. It can be
redisplayed at any time by pressing the (index)
button.
3 To display the actual broadcast simultaneously with the teletext
page, press the TTX/MIX ( ) button.
4 To return to normal viewing press the TV( ) button.
1
1
Teletext Decoder (depending on the model)
Displaying Teletext Information (depending on the model)
KS9A(03120A-01)EU_eng 2/19/04 11:31 AM Page 29
Page: 29
30
ENG
Selecting a Specific Teletext Page (depending on the model)
Press the number buttons on the remote control to enter the page
number directly:
1 Enter the three-digit page number listed in the contents by pressing
the corresponding numeric buttons.
Result: The current page counter is incremented and the page is
then displayed.
2 If the selected page is linked with several secondary pages, the
secondary pages are displayed in sequence. To freeze the display
on a given page, press the (hold). Press the (hold) again to
resume.
3 Using the various display options:
To display... Press the...
◆ Both teletext information and TTX/MIX ( )
the normal broadcast
◆ Hidden text (reveal)
(answers to quiz games, for example)
◆ The normal screen (reveal) again
◆ A secondary page, (sub-page)
by entering its 4-digit number
◆ The next page (page up)
◆ The previous page (page down)
◆ Double-size letters in the: (size)
• Upper half of the screen ◆ Once
• Lower half of the screen ◆ Twice
◆ Normal screen ◆ Three times
KS9A(03120A-01)EU_eng 2/19/04 11:31 AM Page 30
Page: 30
31
ENG
Using FLOF to Select a Teletext Page (depending on the model)
The various topics included in the teletext pages are color-coded,
and can be selected by pressing the colored buttons on the remote
control.
1 Display the teletext contents page by pressing the TTX/MIX
( ) button.
2 Press the colored button corresponding to the topic that you wish to
select (The available topics are listed on the status information
line).
Result: The page is displayed with additional color-coded
information that can be selected in the same way.
3 To display the: Press the:
Previous page Red button.
Next page Green button.
4 When you have finished, press the TV ( ) button to return to the
normal broadcast.
KS9A(03120A-01)EU_eng 2/19/04 11:31 AM Page 31
Page: 31
32
ENG
Storing Teletext Pages (depending on the model)
Up to four teletext pages can be stored.
1 Select the LIST mode.
Result: Four 3-digit numbers are displayed in different colors at
the bottom of the screen.
2 Press the colored button corresponding to the page that will be
replaced.
3 Enter the new page number using the numeric buttons.
4 Repeat steps 2 and 3 for each page to be stored, using a different
colored button each time.
5 Press the (store) button until the corresponding blocks are
displayed in white.
➣ The button is used to switch between:
◆ LIST mode
◆ FLOF mode
Viewing Pictures From External Sources
Once you have connected up your various audio and video systems,
you can view the different sources by selecting the appropriate input.
1 Check that all the necessary connections have been made.
2 Switch the television on and if necessary, press the VIDEO ( )
button one or more times until the required input is displayed.
➢ Depending on the source selected, the pictures may appear
automatically.
➢ To watch television programmes again, press the TV ( )
button and select the number of the channel required.
KS9A(03120A-01)EU_eng 2/19/04 11:31 AM Page 32
Page: 32
33
ENG
Connecting to the Audio/Video Input/Outputs
➢ The actual configuration on your TV may be different, depending on
your model.
➢ The Audio/Video connector on the rear of the television is
used for equipment with an RGB output.
Rear of TV
(depending on the model)
Video disc player
Decoder/
Video game device
VCR
Camcorder
Satellite receiver
AV cable
(depending on the model)
Front (or Side) of TV
(depending on the model)
AV cable
(depending on the model)
Video disc player
Decoder/
Video game device
Camcorder
➢ ◆ The Audio/Video connector on the front (or side) of the television is
used for equipment, such as camcorders, video disc players and
certain video games.
◆ When both the front (or side) and rear connectors are connected to external equipment,
the front (or side) AV has the priority.
INPUT
MONITOR
-OUT
VIDEO AUDIO
OUTPUT
INPUT
VIDEO AUDIO
INPUT
MONITOR
-OUT
VIDEO
(MONO)
L-AUDIO-R
KS9A(03120A-01)EU_eng 2/19/04 11:31 AM Page 33
Page: 33
34
ENG
Automatic Degaussing to Remove Color Patches
Before contacting Samsung after-sales service, perform the following simple checks.
If you cannot solve the problem using the instructions below, note the model and serial number of the
television and contact your local dealer.
◆ Check that the mains lead has been connected to a wall socket.
◆ Check that you have pressed the “ ” (ON/OFF) button.
◆ Check the picture contrast and brightness settings.
◆ Check the volume.
◆ Check the volume.
◆ Check whether the MUTE button has been pressed on the
remote control.
◆ Adjust the colour settings.
◆ Check that the broadcast system selected is correct.
◆ Try to identify the electrical appliance that is affecting the television
and move it further away.
◆ Plug your television into a different mains socket.
◆ Check the direction, location and connections of your aerial.
This interference is often due to the use of an indoor aerial.
◆ Replace the remote control batteries.
◆ Clean the upper edge of the remote control (transmission window).
◆ Check the battery terminals.
No sound or picture
Normal picture but no sound
No picture or black and white picture
Sound and picture interference
Blurred or snowy picture,
distorted sound
Remote control malfunctions
A degaussing coil is mounted around the picture tube, so you do not normally need to degauss the
television manually.
If you move the television to a different position and color patches appear on the screen, you must:
◆ Switch the television off by pressing the “ ” (ON/OFF) button on the front panel
◆ Unplug the television from the wall socket
◆ Leave the television power-off (stand-by) for about 30 minutes so that the automatic degauss
function can be activated, and then press the POWER ( ) button on the remote control.
☛ If your television will be left unattended, press the “ ” (ON/OFF) button to turn your
television off.
Troubleshooting: Before Contacting Service Personnel
KS9A(03120A-01)EU_eng 2/19/04 11:31 AM Page 34
Page: 34
35
ENG
Wiring the Mains Power Supply Plug (UK Only)
IMPORTANT NOTICE
The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is
indicated on the pin face of the plug and, if it requires replacing, a fuse approved to BSI1362 of the same rating
must be used.
Never use the plug with the fuse cover omitted if the cover is detachable. If a replacement fuse cover is required,
it must be of the same colour as the pin face of the plug. Replacement covers are available from your dealer.
If the fitted plug is not suitable for the power points in your house or the cable is not long enough to reach a power
point, you should obtain a suitable safety approved extension lead or consult your dealer for assistance.
However, if there is no alternative to cut off the plug, remove the fuse and then safely dispose of the plug.
Do NOT connect the plug to a mains socket as there is a risk of shock hazard from the bared flexible cord.
IMPORTANT
The wires in the mains lead are coloured in accordance with the following code:
BLUE - NEUTRAL BROWN - LIVE
As these colours may not correspond to the coloured markings identifying the terminals in your plug, proceed as
follows:
The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE or BLACK.
The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured BROWN or RED.
WARNING: DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL, WHICH IS MARKED WITH THE
LETTER E OR BY THE EARTH SYMBOL , OR COLOURED GREEN OR GREEN AND YELLOW.
KS9A(03120A-01)EU_eng 2/19/04 11:31 AM Page 35
Page: 35
- AFTER SALES SERVICE
- Do not hesitate to contact your retailer or service agent if
a change in the performance of your product indicates
that a faulty condition may be present.
AA68-03120A-01
ELECTRONICS
KS9A(03120A-01)EU_eng 2/19/04 11:31 AM Page 36

Question & answers

There are no questions about the Samsung CW-21M063N yet.

Ask a question about the Samsung CW-21M063N

Have a question about the Samsung CW-21M063N but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Samsung CW-21M063N. Please make sure that you describe your difficulty with the Samsung CW-21M063N as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.