Samsung BD-J6300 manual

View a manual of the Samsung BD-J6300 below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Samsung
  • Product: Blu-ray player
  • Model/name: BD-J6300
  • Filetype: PDF
  • Available languages: English

Table of Contents

Page: 0
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service,
please register your product at
www.samsung.com/register
Blu-ray™ Disc Player
user manual
BD-J6300
Page: 1
2 English
Safety Information
•	The slots and openings in the cabinet and in
the back or bottom are provided for necessary
ventilation. To ensure reliable operation of this
apparatus, and to protect it from over heating,
these slots and openings must never be
blocked or covered.
-
- Do not place this apparatus in a confined
space, such as a bookcase, or built-in
cabinet, unless proper ventilation is provided.
-
- Do not place this apparatus near or over a
radiator or heat register, or where it is exposed
to direct sunlight.
-
- Do not place vessels (vases etc.) containing
water on this apparatus. A water spill can
cause a fire or electric shock.
•	Do not expose this apparatus to rain or place it
near water (near a bathtub, washbowl, kitchen
sink, or pool, etc.). If this apparatus accidentally
gets wet, unplug it and contact an authorized
dealer immediately.
•	This apparatus uses batteries. In your
community, there might be environmental
regulations that require you to dispose of these
batteries properly. Please contact your local
authorities for disposal or recycling information.
•	Do not overload wall outlets, extension cords or
adaptors beyond their capacity, since this can
result in fire or electric shock.
•	Route power-supply cords so that they are
not likely to be walked on or pinched by items
placed on or against them. Pay particular
attention to cords at the plug end, at wall
outlets, and the point where they exit from the
apparatus.
•	To protect this apparatus from a lightning storm,
or when it is left unattended and unused for
long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable
system. This will prevent damage to the set due
to lightning and power line surges.
•	Before connecting the AC power cord to the
DC adaptor outlet, make sure the voltage
designation of the DC adaptor corresponds to
the local electrical supply.
•	Never insert anything metallic into the open
parts of this apparatus. Doing so may create a
danger of electric shock.
•	To avoid electric shock, never touch the inside
of this apparatus. Only a qualified technician
should open this apparatus.
•	Make sure to plug the power cord in until it is
firmly seated. When unplugging the power cord
from a wall outlet, always pull on the power
cord's plug. Never unplug by pulling on the
power cord. Do not touch the power cord with
wet hands.
•	If this apparatus does not operate normally -
in particular, if there are any unusual sounds or
smells coming from it - unplug it immediately
and contact an authorized dealer or service
center.
•	Maintenance of Cabinet.
-
- Before connecting other components to this
product, be sure to turn them off.
-
- If you move your product suddenly from a
cold place to a warm place, condensation
may occur on the operating parts and lens
and cause abnormal disc playback. If this
occurs, unplug the product, wait for two
hours, and then connect the plug to the
power outlet. Then, insert the disc, and try to
play back again.
Warning
CAUTION
RISK OF ELECTRIC SHOCK. DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE THE COVER (OR BACK). THERE ARE NO USER SERVICEABLE
PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL.
This symbol indicates that high voltage is
present inside. It is dangerous to make any
kind of contact with any internal part of this
product.
This symbol indicates that important
literature concerning operation and
maintenance has been included with this
product.
Page: 2
3 English
01
Safety
Information
•	Be sure to pull the power plug out of the outlet
if the product is to remain unused or if you are
leaving the house for an extended period of time
(especially when children, elderly, or disabled
people will be left alone in the house).
-
- Accumulated dust can cause an electric
shock, an electric leakage, or a fire by causing
the power cord to generate sparks and heat
or the insulation to deteriorate.
•	Contact an authorized service center for
information if you intend to install your
product in a location with heavy dust, high
or low temperatures, high humidity, chemical
substances, or where it will operate 24 hours
a day such as in an airport, a train station, etc.
Failing to do so may lead to serious damage to
your product.
•	Use only a properly grounded plug and wall
outlet.
-
- An improper ground may cause electric shock
or equipment damage. (Class 1 Equipment
only.)
•	To turn this apparatus off completely, you must
disconnect it from the wall outlet. Consequently,
the wall outlet and power plug must be readily
accessible at all times.
•	Do not allow children to hang on the product.
•	Store the accessories (battery, etc.) in a location
safely out of the reach of children.
•	Do not install the product in an unstable location
such as a shaky self, a slanted floor, or a
location exposed to vibration.
•	Do not drop or strike the product. If the product
is damaged, disconnect the power cord and
contact a service center.
•	To clean this apparatus, unplug the power cord
from the wall outlet and wipe the product using
a soft, dry cloth. Do not use any chemicals such
as wax, benzene, alcohol, thinners, insecticide,
air fresheners, lubricants, or detergent. These
chemicals can damage the appearance of the
product or erase the printing on the product.
•	Do not expose this apparatus to dripping or
splashing. Do not put objects filled with liquids,
such as vases on the apparatus.
•	Do not dispose of batteries in a fire.
•	Do not plug multiple electric devices into the
same wall socket. Overloading a socket can
cause it to overheat, resulting in a fire.
•	There is danger of an explosion if you replace
the batteries used in the remote with the wrong
type of battery. Replace only with the same or
equivalent type.
•	WARNING - TO PREVENT THE
SPREAD OF FIRE, KEEP CANDLES
AND OTHER ITEMS WITH OPEN
FLAMES AWAY FROM THIS
PRODUCT AT ALL TIMES.
•	WARNING - This product contains chemicals
known to the State of California to cause cancer
and reproductive toxicity.
This Class B digital apparatus complies
with Canadian ICES-003
This device complies with Industry Canada license
exempt RSS standard(s). Operation is subject to
the following two conditions: (1) this device may
not cause interference, and (2) this device must
accept any interference, including interference that
may cause undesired operation of the device.
FCC NOTE (for U.S.A)
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses
and can radiate radio frequency energy and, if
not installed and used in accordance with the
instructions, may cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and on.
The user is encouraged to try to correct the
interference by one or more of the following
measures.
•	Reorienting or relocating the receiving antenna.
•	Increasing the separation between the
equipment and receiver.
Page: 3
4 English
Safety Information
•	Connecting this equipment to an outlet that is
on a different circuit than the one the receiver is
connected to.
•	Consulting the dealer or an experienced radio/
TV technician for help.
This class B digital product meets all requirements
of the Canadian Interference - Causing Equipment
Regulations.
Note to CATV system installer
This reminder is provided to call CATV system
installer's attention to Article 820-40 of the
National Electrical Code (Section 54 of Canadian
Electrical Code, Part I) that provides guidelines
for proper grounding and, in particular, specifies
that the cable ground shall be connected to the
grounding system of the building as close to the
point of cable entry as practical.
CLASS 1 LASER product
This Compact Disc player is classified as a CLASS
1 LASER product. Use of controls, adjustments
or performance of procedures other than those
specified herein may result in hazardous radiation
exposure.
DANGER :
•	VISIBLE AND INVISIBLE LASER RADIATION
WHEN OPEN. AVOID DIRECT EXPOSURE TO
BEAM. (FDA 21 CFR)
CAUTION :
•	CLASS 3B VISIBLE AND INVISIBLE LASER
RADIATION WHEN OPEN. AVOID EXPOSURE
TO THE BEAM. (IEC 60825-1)
•	THIS product UTILIZES A LASER. USE
OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION
EXPOSURE. DO NOT OPEN THE COVER.
DO NOT REPAIR THE PRODUCT YOURSELF.
REFER SERVICING TO QUALIFIED
PERSONNEL.
CLASS 1	 LASER PRODUCT
KLASSE 1	 LASER PRODUKT
LUOKAN 1	 LASER LAITE
KLASS 1 	 LASER APPARAT
PRODUCTO	 LÁSER CLASE 1
|
| NOTE |
\
\ If the Region number of a Blu-ray Disc/DVDs does not
correspond to the Region number of this product, the
product cannot play the disc.
Precautions
Important Safety Instructions
Read these operating instructions carefully before
using the unit. Follow all the safety instructions
listed below.
Keep these operating instructions handy for future
reference.
1.	 Read these instructions.
2.	 Keep these instructions.
3.	 Heed all warnings.
4.	 Follow all instructions.
5.	 Do not use this apparatus near water.
6.	 Clean only with a dry cloth.
7.	 Do not block any ventilation openings. Install
in accordance with the manufacturer's
instructions.
8.	 Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including AV receivers) that
produce heat.
9.	 Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade
or the third prong are provided for your safety.
If the provided plug does not fit into your
outlet, consult an electrician for replacement
of the obsolete outlet.
Page: 4
5 English
01
Safety
Information
10.	 Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where it exits the
apparatus.
11.	 Only use attachments/accessories specified
by the manufacturer.
12.	 Use only with the cart,
stand, tripod, bracket,
or table specified by the
manufacturer, or sold with
the apparatus. When a cart
is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
13.	 Unplug this apparatus during lightning storms
or when unused for long periods of time.
14.	 Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way,
such as when the power-supply cord or plug
is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does
not operate normally, or has been dropped.
Using the 3D function
IMPORTANT HEALTH AND SAFETY INFORMATION
FOR 3D PICTURES.
Read and understand the following safety
information before using the 3D function.
•	Some viewers may experience discomfort while
viewing 3D TV such as dizziness, nausea, and
headaches.
If you experience any such symptom, stop
viewing 3D TV, remove the 3D Active Glasses,
and rest.
•	Watching 3D images for an extended period of
time may cause eye strain. If you feel eye strain,
stop viewing 3D TV, remove your 3D Active
Glasses, and rest.
•	A responsible adult should frequently check on
children who are using the 3D function.
If there are any reports of tired eyes, headaches,
dizziness, or nausea, have the child stop viewing
3D TV and rest.
•	Do not use the 3D Active Glasses for other
purposes (such as general eyeglasses,
sunglasses, protective goggles, etc.).
•	Do not use the 3D function or 3D Active Glasses
while walking or moving around. Using the 3D
function or 3D Active Glasses while moving
around may cause you to bump into objects,
trip, and/or fall, and cause serious injury.
•	If you want to enjoy 3D content, connect a 3D
device (3D compliant AV receiver or TV) to the
player's HDMI OUT port using a high-speed
HDMI cable. Put on 3D glasses before playing
the 3D content.
•	The player outputs 3D signals only through
HDMI cable connected to the HDMI OUT port.
•	The video resolution in 3D play mode is
determined by the resolution of the original 3D
video. You can not change the resolution.
•	Some functions such as BD Wise, screen size
adjustment, and resolution adjustment may not
operate properly in 3D play mode.
•	You must use a high-speed HDMI cable for
proper output of the 3D signal.
•	Stay at least three times the width of the screen
from the TV when watching 3D images. For
example, if you have a 46-inch screen, stay 138
inches (11.5 feet) from the screen.
•	Place the 3D video screen at eye level for the
best 3D picture.
•	When the player is connected to some 3D
devices, the 3D effect may not function properly.
•	This player does not convert 2D content into
3D.
•	"Blu-ray 3D" and "Blu-ray 3D" logo are
trademarks of the Blu-ray Disc Association.
Page: 5
6 English
Contents
Safety Information
2	 Warning
4	 Precautions
4	 Important Safety Instructions
5	 Using the 3D function
Getting Started
8	 Accessories
9	 Front Panel
9	 Rear Panel
10	 Remote Control
10	 Tour of the Remote Control
Connections
11	 Connecting to a TV
12	 Connecting to an Audio System
12	 Method 1 Connecting to an HDMI
compatible AV receiver
12	 Method 2 Connecting to an AV receiver
with a Digital Optical Cable
13	 Connecting to a Network Router
13	 Wired Network
13	 Wireless Network
Settings
14	 The Initial Settings Procedure
14	 The Home Screen
15	 Accessing the Settings Screen
15	 Buttons on the Remote Control Used for
the Settings Menu
16	 Settings Menu Functions
16	Picture
17	Sound
17	Network
18	 Smart Hub
18	System
20	Support
20	 Networks and the Internet
20	 Configuring Your Network Connection
23	 Wi-Fi Direct
23	 Upgrading Software
24	 Update now
24	 Auto Update
Media Play
26	 Playing Commercial Discs
26	 Disc Storage & Management
26	 Playing Photos, Videos, and Music
(Multimedia)
26	 Playing Media Content Saved on a USB
Device
27	 Playing Media Content Saved in a
Computer/Mobile Device
27	 Playing a Disc with User Recorded
Content
29	 Controlling Video Playback
29	 Buttons on the Remote Control used for
Video Playback
29	 Using the Settings Menu During Playback
31	 Using the Sort by & Options Menus
Page: 6
7 English
Contents
31	 Controlling Music Playback
31	 Buttons on the Remote Control used for
Music Playback
32	 Using the Options Menu During Playback
32	 Using the Sort by & Options Menus on a
File Screen
33	 Repeating Tracks on an Audio CD
33	 Shuffling Tracks on an Audio CD
33	 Creating a Playlist from an Audio CD
33	Ripping
34	 Playing Photo Contents
34	 Using the Tools Menu During Playback
35	 Using the Sort by & Options Menus
36	 Send files
36	 Copying Videos, Music or Photos
36	 Using the Send Function
Network Services
37	 Creating a Samsung Account
38	 Before Using Samsung Apps
38	 Using Samsung Apps
38	The Samsung Apps Screen at a Glance
39	 Starting an Application
40	 Screen Mirroring
41	 Using the Web Browser
41	 Link Browsing and Pointer Browsing
41	 The Control Panel at a Glance
43	 Using the Setting Menu
44	 Linking Your Internet Service Accounts
to the Product
44	 BD-LIVE™
Appendix
45	 Additional Information
45	Notes
47	 Resolution according to the contents type
48	 Digital Output Selection
49	 Troubleshooting
52	 Disc and Format Compatibility
52	 Disc types and contents your product can
play
52	 Disc types your product cannot play
53	 Region Code
53	 Logos of Discs the product can play
54	 Supported Formats
57	 Compliance and Compatibility Notice
58	 Copy Protection
58	 Network Service Disclaimer
59	 Licenses
60	 Specifications
Page: 7
8 English
Getting Started
Accessories
Check for the supplied accessories shown below.
APPS
PANDORA DIGITAL SUBTITLE INPUT
HOME
1
4
7
VOL+
2
5
8
0
VOL–
3
6
9
SOURCE
DISC MENU
SMART
TITLE MENU
VOL VOL
POPUP
A B C D
SEARCH FULL
SUBTITLE
SCREEN
SAMSUNG TV
– +
INFO
TOOLS
RETURN EXIT
HOME
AUDIO
REPEAT
HUB
Batteries for Remote Control (AAA Size)
User Manual Remote Control
Page: 8
9 English
02
Getting
Started
Front Panel
PLAY/PAUSE BUTTON
USB HOST
REMOTE CONTROL SENSOR
DISC TRAY
DISPLAY
STOP BUTTON
POWER BUTTON
OPEN/CLOSE BUTTON
|
| NOTES |
\
\ To upgrade the product's software through the USB HOST jack, you must use a USB memory stick.
\
\ When the product displays the Blu-ray Disc's menu, you cannot start the movie by pressing the Play button on the product
or the remote control. To play the movie, you must select Play Movie or Start in the disc's menu, and then press the v
button on the remote control.
Rear Panel
HDMI OUT LAN
DIGITAL AUDIO OUT
Page: 9
10 English
Getting Started
Remote Control
Tour of the Remote Control
Installing batteries
|
| NOTE |
\
\ If the remote control does not operate properly:
-
- Check the polarity +/– of the batteries.
-
- Check if the batteries are drained.
-
- Check if the remote sensor is blocked by obstacles.
-
- Check if there is any fluorescent lighting nearby.
|
| CAUTION |
\
\ Dispose of batteries according to local environmental
regulations. Do not put them in the household trash.
APPS
PANDORA DIGITAL SUBTITLE INPUT
HOME
1
4
7
VOL+
2
5
8
0
VOL–
3
6
9
SOURCE
DISC MENU
SMART
TITLE MENU
VOL VOL
POPUP
A B C D
SEARCH FULL
SUBTITLE
SCREEN
SAMSUNG TV
– +
INFO
TOOLS
RETURN EXIT
AUDIO
REPEAT
HUB
HOME
After setup, allows you to set the input
source on your TV.
(This button is only available for Samsung TVs.)
Turn the player on and off.
Press to open and close the disc tray.
Press the number buttons to operate
options.
Use to enter the disc menu.
Press to skip backwards or forwards.
Press to stop a disc.
Press to use Apps.
Press to move to the Home screen.
Press to use the Tools menu.
Return to the previous menu.
Press to search contents.
Use to access various audio functions on a
disc.
These buttons are used both for menus
on the player and also several Blu-ray Disc
functions.
Turn the TV on and off.
(This button is only available for Samsung
TVs.)
TV volume adjustment.
(This button is only available for Samsung
TVs.)
Use to enter the Popup menu/Title menu.
Press to search backwards or forwards.
Press to pause a disc.
Press to play a disc.
Allows you to repeat a title, chapter, track
or disc.
Use to display the playback information.
Use to select menu items and change
menu values.
Press to exit the menu.
Press to switch the Blu-ray Disc/DVD's
subtitle language.
Press to use the full screen function.
During the Blu-ray Disc/DVDs playback, this
button does not operate.
Page: 10
11 English
03
Connections
Connections
Connecting to a TV
Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI
IN jack on your TV.
-
- Do not connect the power cord to the wall outlet until you have made all the other connections.
-
- When you change the connections, turn off all devices before you start.
Audio
Video
|
| NOTES |
\
\ If you use an HDMI-to-DVI cable to connect to your display device, you must also connect the DIGITAL AUDIO OUT on the
product to an audio system to hear audio.
\
\ An HDMI cable outputs digital video and audio, so you don't need to connect an audio cable.
\
\ Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of your TV.
\
\ When you connect the product to your TV using an HDMI cable or to a new TV, and then turn it on for the first time, the
product automatically sets the HDMI output resolution to the highest supported by the TV.
\
\ A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Color to Off in the menu.
\
\ To view video in the HDMI 720p, 1080i, 1080p or 2160p output mode, you must use a high speed (category 2) HDMI cable.
\
\ HDMI outputs only a pure digital signal to the TV.
If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on the screen.
Page: 11
12 English
Connections
Connecting to an Audio System
You can connect this product to an audio system using the methods illustrated below.
-
- Do not connect the power cord to the wall outlet until you have made all the other connections.
-
- When you change the connections, turn off all devices before you start.
Method 1 Connecting to an HDMI compatible AV receiver
•	Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the
HDMI IN jack on your receiver.
•	Best quality (Recommended)
Method 2 Connecting to an AV receiver with a Digital Optical Cable
•	Using a digital Optical cable (not supplied), connect the OPTICAL DIGITAL AUDIO OUT jack on the
product to the DIGITAL OPTICAL IN jack of the receiver.
•	Good quality
•	You will hear sound only through the front two speakers with Digital Output set to PCM.
Audio
Audio
Method 2
Method 1
AV Receiver
|
| NOTE |
\
\ If you connect a receiver to the player's OPTICAL DIGITAL AUDIO OUT port, receiver’s audio reproduction may not synchronize
with that of the TV.
Page: 12
13 English
03
Connections
Connecting to a Network Router
You can connect your product to your network
router using one of the methods illustrated below.
To use the DLNA network functionality, you must
connect your PC to your network as shown in the
illustrations.
The connection can be wired or wireless.
Wired Network
Broadband
service
Broadband
service
Broadband modem
(with integrated router)
Broadband
modem
Router
Or
|
| NOTES |
\
\ Your router or your Internet Service Provider's policies
may prevent the product from accessing Samsung's
software update server. If this occurs, contact your
Internet Service Provider (ISP) for more information.
\
\ DSL users, please use a router to make a network
connection.
Wireless Network
Broadband
service
Wireless Router
|
| NOTES |
\
\ If your wireless router supports DHCP, this product can
use a DHCP or static IP address to connect to the wireless
network.
\
\ Set your wireless router to Infrastructure mode.
Ad-hoc mode is not supported.
\
\ The product supports only the following wireless security
key protocols:
-
- WEP (OPEN/SHARED), WPA-PSK (TKIP/AES),
WPA2-PSK (TKIP/AES)
\
\ Select a channel on the wireless router that is not
currently being used. If the channel set for the wireless
router is currently being used by another device nearby, it
will result in interference and communication failure.
\
\ If you select the Pure High-throughput (Greenfield)
802.11n mode and set the Encryption type on your router
to WEP, TKIP or TKIP-AES (WPS2Mixed), the product will
not support a connection in compliance with new Wi-Fi
certification specifications.
\
\ Wireless LAN, by its nature, may cause interference,
depending on the operating conditions (router
performance, distance, obstacles, interference by other
radio devices, etc).
Page: 13
14 English
Settings
Settings
The Initial Settings Procedure
•	The Home screen will not appear if you do not
configure the initial settings.
•	The OSD (On Screen Display) may change in this
product after you upgrade the software version.
•	The access steps may differ depending on the menu
you selected.
After you have connected the product to your
TV, turn on the TV and product. When you turn
on the product the first time, the product's Initial
Settings screen appears on the TV. The Initial
Settings procedure lets you set the On Screen
Display (OSD) and menu languages, the aspect
ratio (screen size), and network configuration,
and connect the player to the Internet. Follow the
directions on the screen.
When the initial setup is completed, a tutorial
screen explaining how to use the Home menu will
appear. To exit this screen, press the EXIT button
on the remote.
|
| NOTES |
\
\ If you skip Network Setup during the Initial Settings
procedure, you can configure your network settings later.
See "Configuring Your Network Connection" on pages
20~23 for instructions.
\
\ If you want to display the Initial Settings screen again and
make changes, select Settings > System > Setup in
the Home screen or select the Reset option. (See page
20)
\
\ If you want to use the Anynet+(HDMI-CEC) function,
please follow the instructions below.
1)	 Connect the product to an Anynet+(HDMI-CEC)-
compliant Samsung TV using an HDMI Cable.
2)	 Set the Anynet+(HDMI-CEC) feature to On in both the
TV and the product.
3)	 Set the TV to the Initial Settings Procedure.
The Home Screen
WebBrowser 2 3
SAMSUNG APPS
1 2 3
No Disc
1 2 6
5
7 8 9
MULTIMEDIA
PLAY DISC
RECOMMENDED MY APPS
Screen Mirroring Settings
3 4
0
1
PLAY DISC : Lets you play photos, videos, or music
content from a Disc.
2
MULTIMEDIA : Lets you play photos, videos, or
music content from USB or mobile devices or PCs.
3 Sign In : Lets you log into your Samsung account.
4
Search : Lets you search for content in Apps and
YouTube by entering corresponding search words.
5
Help : The tutorial screen explaining how to use the
Home menu will appear.
6
SAMSUNG APPS : Gives you access to various
applications you can download.
7
RECOMMENDED : Gives you direct access to
recommended applications.
8
MY APPS : Apps downloaded from MY APPS are
displayed.
9
Screen Mirroring : Lets you view the screen of
your smart phone or android tablet on a TV you
have connected to this product.
0
Settings : Opens the product's menu. In the menu,
you can set various functions to suit your personal
preferences.
Page: 14
15 English
04
Settings
|
| NOTE |
\
\ If you leave the product in the stop mode for more than
5 minutes without using it, a screen saver will appear on
your TV. If the product is left in the screen saver mode for
more than 20 minutes, the power will automatically turn off.
Accessing the Settings Screen
1.	 Select Settings on the Home screen, and
then press v button. The Settings screen
appears.
Settings
Picture
Sound
Network
Smart Hub
System
Support
Picture
UHD Output Auto
3D Settings
TV Aspect Ratio 16:9 Original
BD Wise Off
Resolution Auto
Movie Frame (24Fs) Auto
DVD 24Fs Conversion Off
2.	 To access the menus, sub-menus, and
options on the Settings screen, please refer
to the remote control illustration in the next
column.
Buttons on the Remote Control Used
for the Settings Menu
APPS
PANDORA DIGITAL SUBTITLE INPUT
HOME
1
4
7
VOL+
2
5
8
0
VOL–
3
6
9
DISC MENU
SMART
TITLE MENU
VOL VOL
POPUP
A B C D
SEARCH FULL
SUBTITLE
SCREEN
SAMSUNG TV
– +
INFO
TOOLS
RETURN EXIT
HOME
AUDIO
REPEAT
HUB
1
2 4
3
1 HOME button : Press to move to the Home screen.
2
RETURN button : Press to return to the previous
menu.
3
v (Enter) / DIRECTION buttons :
•	Press ▲▼◄► to move the cursor or select an
item.
•	Press the v button to activate the currently
selected item or confirm a setting.
4 EXIT button : Press to exit the current menu.
Detailed Function Information
Each Settings function, menu item, and individual
option is explained in detail on-screen. To view an
explanation, use the ▲▼◄► buttons to select the
function, menu item, or option. The explanation
will usually appear on the right side of the screen.
A short description of each Settings function
starts on the next page. Additional information on
some of the functions is also in the Appendix of
this manual.
Page: 15
16 English
Settings
Settings Menu Functions
Picture
UHD Output
This option outputs HDMI video at UHD (Ultra
High Definition) resolution. This is only available
when Movie Frame is set to Auto.
|
| NOTES |
\
\ To use this feature, you must connect the product to
a device that supports UHD resolution and you must
have content that plays at 24Fs (film speed).
\
\ This device cannot play UHD content. However, it can
scale up content resolution lower than Full HD to UHD.
\
\ When you select UHD Output, only 2160 x 3840, 24
frame per second output is available.
3D Settings
Select whether to play a Blu-ray Disc with 3D
content in 3D Mode.

 If you move to the Home or SAMSUNG APPS
screen while in 3D mode, the product will switch
to 2D mode automatically.
TV Aspect Ratio
Lets you adjust the output of the product to the
screen size and screen format of your TV.
BD Wise
BD Wise is Samsung's latest inter-connectivity
feature.
When you connect a Samsung product and a
Samsung TV with BD Wise to each other via
HDMI, and BD Wise is on in both the product
and TV, the product outputs video at the video
resolution and frame rate of the Blu-ray Disc/DVD.
Resolution
Set the output resolution of the HDMI video signal
to BD Wise, Auto, 1080p, 1080i, 720p or 480p.
The number indicates the number of lines of video
per frame.
The i and p indicate interlaced and progressive
scan, respectively. Generally, the more lines, the
higher quality.
Movie Frame (24Fs)
If the product is connected to a 24Fs compatible
TV, setting the Movie Frame (24Fs) feature to
Auto lets the product adjust its HDMI output to
24 frames per second automatically for improved
picture quality.
•	You can enjoy the Movie Frame (24Fs) feature
only on a TV supporting this frame rate.
•	Movie Frame is only available when the product
is in the HDMI 1080i or 1080p output resolution
modes.
DVD 24Fs Conversion
Converts DVD playback to 24 frames per second
and outputs it via HDMI. This option is only
available when Movie Frame (24Fs) is set to On.
|
| NOTE |
\
\ This feature applies to NTSC discs only.
Fit Screen Size
Set the screen to the optimal size. (Available for
Smart Hub and Screen Mirroring only.)
HDMI Color Format
Lets you set the color space format for the HDMI
output so that it matches the capabilities of the
connected device (TV, monitor, etc). The screen
goes black momentarily after you have selected a
format.
Page: 16
17 English
04
Settings
HDMI Deep Color
Lets you set the product to output HDMI video
with Deep Color. Deep Color provides more
accurate color reproduction with greater color
depth.
Progressive Mode
Lets you improve picture quality when viewing
DVDs.
Sound
Digital Output
Lets you select the digital audio output format that
is suitable for your TV or AV Receiver. For more
details, see the digital output selection table on
page 48.
PCM Downsampling
Lets you choose to have 96kHz PCM signals
downsampled to 48kHz before they are outputted
to an amplifier. Choose On if your amplifier or
receiver is not compatible with a 96kHz signal.
Dynamic Range Control
Lets you apply dynamic range control to Dolby
Digital, Dolby Digital Plus, and Dolby TrueHD
audio.

 Auto : Automatically controls the dynamic range
of Dolby TrueHD audio, based on information
in the Dolby TrueHD soundtrack. Also turns
dynamic range control on for Dolby Digital and
Dolby Digital Plus.

 Off : Leaves the dynamic range uncompressed,
letting you hear the original sound.

 On : Turns dynamic range control on for all three
Dolby formats. Quieter sounds are made louder
and the volume of loud sounds is reduced.
Downmixing Mode
Lets you select the multi-channel downmix method
that is compatible with your stereo system.
You can choose to have the product downmix to
normal stereo or to surround compatible stereo.
DTS Neo:6 Mode
You can enjoy multichannel sound via HDMI
output from a 2 channel audio source.
Audio Sync
In some cases when the product is connected to
a digital TV, the audio signal may not synchronize
with the video signal. If this occurs, adjust the
audio delay time to match the video signal.
•	You can set the audio delay time between 0 ms
and 250 ms. Adjust it to the optimal setting.
|
| NOTE |
\
\ The audio delay time you specify may not be exact
depending on the played content.
Network
Network Status
Lets you check the current network and Internet
status.
Network Settings
Configure the network connection so you can
enjoy various features such as Internet services
or DLNA functionality, and perform Software
Updates.
Page: 17
18 English
Settings
Wi-Fi Direct
Lets you connect a Wi-Fi Direct device to the
product using a peer-to-pear network, without the
need for a wireless router.
Note that if the product is connected to a wireless
network, it may be disconnected when you use
Wi-Fi Direct.
|
| NOTE |
\
\ Text files, such as files with a .TXT or .DOC extension,
will not display when you are using the Wi-Fi Direct
function.
Multimedia Device Settings
Lets you control which devices on your network,
such as smart phones and tablets, can share
content with your product.
Device Name
Lets you input a name for the product that will
identify it on your network.
BD-Live Settings
Set various BD-Live functions. BD-Live allows you
to access extra features available on some Blu-ray
Discs if you are connected to the Internet.

 BD-Live Internet Connection : Lets you fully
allow, partly allow, or prohibit a BD-Live Internet
connection.

 BD Data Management : Manage BD data
downloaded from a BD-Live service or Blu-ray
Disc.
Smart Hub
Terms & Policy
You must review and agree to both the App Terms
& Conditions and the privacy policy to use App
services.
Reset Smart Hub
Resets all Smart Hub settings to their default
settings. To use, you must enter the security PIN.
System
Setup
Lets you re-run the Initial Settings procedure.
Quick Start
Lets you set the product to turn on quickly by
decreasing the boot time.
|
| NOTE |
\
\ If this function is set to On, Standby power
consumption will be increased.
Language
You can select the language you prefer for the On-
screen menu, disc menu, audio, subtitles, etc.
•	The language you select for the disc menu,
disc audio, or subtitles will only appear if it is
supported on the disc.
Page: 18
19 English
04
Settings
Device Manager
You can connect a wireless USB keyboard or
mouse to the USB port on the front of the product.

 Keyboard Settings : Lets you configure a
wireless USB keyboard connected to the
product.
|
| NOTE |
\
\ You can use the keyboard only when a QWERTY
keyboard screen or window appears in the Web
Browser.

 Mouse Settings : Lets you configure a wireless
USB mouse connected to the product. You can
use the mouse in the product's menu and the
Web Browser in the same way you use a mouse
on your PC.
`
` To use a mouse with the product's menu:
1.	 Connect the USB mouse to the product.
2.	 Click the primary button you selected
in Mouse Settings. The Simple Menu
appears.
3.	 Click the menu options you want.
|
| NOTES |
\
\ Some USB HID keyboards and mice may not be
compatible with your product.
\
\ Some HID keyboard keys may not work.
\
\ Wired USB keyboards are not supported.
\
\ Some applications may not be supported.
\
\ If a wireless HID Keyboard does not operate because
of interference, move the keyboard closer to the
product.
Security
The default security PIN is 0000. Enter the default
PIN to access the security function if you haven't
created your own PIN. After you have accessed
the security function for the first time, change the
PIN using the Change PIN function.

 BD Parental Rating : Prevents playback of
Blu-ray Discs with a rating equal to or above
a specific age rating you have set unless you
enter the PIN.

 DVD Parental Rating : Prevents playback of
DVDs with a rating above a specific numerical
rating you have set unless you enter the PIN.

 Change PIN : Change the 4-digit PIN used to
access security functions.
`
` If you forget your PIN:
1.	 Remove any disc or USB storage device.
2.	 Press and hold the @ button on the top
panel for 5 seconds or more.
The initialization message appears on
the screen, and the power will turn off
automatically.
When you turn your product on again, all
the settings will be reset.
General
You can change the options listed below to match
your preferences.

 Front Display : Change the brightness of the
front panel.

 Time Zone : Select the time zone in which you
live.

 Menu Transparency : Lets you adjust the
transparency of the menu box.
Anynet+ (HDMI-CEC)
Anynet+ is a convenient function that offers linked
operations with other Samsung product that
have the Anynet+ feature and lets you control
those products with one Samsung TV remote.
To operate this function, you must connect this
product to an Anynet+ Samsung TV using an
HDMI cable.
Page: 19
20 English
Settings
Support
Remote Management
When activated, lets Samsung Call Center agents
diagnose and fix problems with your player
remotely. Requires an active Internet connection.
|
| NOTES |
\
\ Remote Management service might not be available in
some countries.
\
\ To use Remote Management:
1)	 Call the Samsung Contact Center and ask for
remote support.
2)	 Open the player's menu on your TV and go to the
Support section.
3)	 Select Remote Management, and then read and
agree to the service agreements. When the PIN
screen appears, provide the PIN number to the
agent.
4)	 The agent accesses your player.
Software Update
This menu allows you to upgrade the product's
software for performance improvements or
additional services.
Contact Samsung
Provides contact information for assistance with
your product.
Reset
Resets all settings to their default settings except
for the network and Smart Hub settings, and then
starts the Setup function. To use, you must enter
the security PIN. The default security PIN is 0000.
Networks and the Internet
When you connect this product to a network,
you can use network based applications and
functions such as Smart Hub and BD-LIVE, and
upgrade the product's software through the
network connection. For more information about
accessing and using Internet services, see the
Network Services chapter of this manual on pages
37~44. Instructions for configuring the network
connection start below.
Configuring Your Network Connection
Before you begin, contact your ISP to find out
if your IP address is static or dynamic. If it is
dynamic, and you have a wired or wireless
network, we recommend using the Automatic
configuration procedures described below.
If you are connecting to a wired network, connect
the product to your router using a LAN cable
before you start the configuration procedure.
If you are connecting to a wireless network,
disconnect any wired network connections before
you begin.
To begin configuring your network connection,
follow these steps:
Wired Network
Ğ
Ğ Wired - Automatic
1.	 In the Home screen, select Settings, and
then press the v button.
2.	 Select Network, and then press the v
button.
3.	 Select Network Settings, and then press the
v button.
4.	 Select Wired in the Network Settings
screen, and then press the v button.
5.	 Select the Connect button, and then press
the v button. The product detects the wired
connection, verifies the network connection,
and then connects to the network.
Page: 20
21 English
04
Settings
Ğ
Ğ Wired - Manual
If you have a static IP address or the Automatic
procedure does not work, you'll need to set the
Network Settings values manually.
Follow Steps 1 and 2 in Wired - Automatic, and
then follow these steps:
1.	 Select Network Status. The product
searches for a network, and then displays the
connection failed message.
2.	 On the bottom of the screen, select IP
Settings, and then press the v button.
The IP Settings screen appears.
3.	 Select the IP Settings field, and then press
the v button.
4.	 Select Enter manually in the IP Settings
field, and then press the v button.
5.	 Select a parameter to enter (IP Address, for
example), and then press the v button.
Use the number keypad on your remote
control to enter the numbers for the
parameter. You can also enter numbers using
the ▲▼ buttons. Use the ◄► buttons on
the remote control to move from entry field
to entry field within a parameter. When done
with one parameter, press the v button.
6.	 Press the ▲ or ▼ button to move to another
parameter, and then enter the numbers for
that parameter following the instructions in
Step 5.
7.	 Repeat Steps 5 and 6 until you have filled in
all parameters.
|
| NOTE |
\
\ You can get the Network parameters from your Internet
provider.
8.	 When finished entering all the parameters,
select OK, and then press the v button.
The product verifies the network connection,
and then connects to the network.
Wireless Network
You can set up a wireless network connection in
four ways:
-
- Wireless Automatic
-
- Wireless Manual
-
- WPS(PBC)
-
- WPS PIN
When you configure the wireless network
connection, any wireless network devices currently
connected through the product or, if applicable,
the product's current wired connection, will be
disconnected.
Ğ
Ğ Wireless - Automatic
1.	 In the Home screen, select Settings, and
then press the v button.
2.	 Select Network, and then press the v
button.
3.	 Select Network Settings, and then press the
v button.
4.	 Select Wireless in the Network Settings
screen, and then press the v button. The
product searches for and then displays a list
of the available networks.
Network Settings
Select your network type.
Wireless network
iptime23
iptime
solugen_edu#2
Network type Wireless
Refresh WPS(PBC)
You can connect your Blu-
ray player to the internet.
Please select which wireless
network to use.
5.	 Select the desired network, and then press
the v button.
6.	 On the Security screen, enter your network's
Security Code or Pass Phrase.
Enter numbers directly using the number
buttons on your remote control. Enter letters
by selecting a letter with an arrow button, and
then pressing v button.
Page: 21
22 English
Settings
|
| NOTE |
\
\ To view the password as you enter it, use the arrow
buttons to select Show Password on the right side, and
then press v button.
7.	 When finished, select Done and then press
the v button. The product verifies the
network connection and then connects to the
network.
8.	 When verification is complete, select OK, and
then press the v button.
|
| NOTE |
\
\ You should be able to find the Security Code or Pass
Phrase on one of the set up screens you used to set up
your router or modem.
Ğ
Ğ Wireless - Manual
If you have a static IP address or the Automatic
procedure does not work, you'll need to set the
Network Settings values manually.
1.	 Follow the directions in Wireless - Automatic
through Step 5.
2.	 The product searches for a network, and
then displays the connection failed message.
3.	 On the bottom of the screen, select IP
Settings, and then press the v button.
The IP Settings screen appears.
4.	 Select the IP Settings field, and then press
the v button.
5.	 Select Enter manually in the IP Settings
field, and then press the v button.
6.	 Select a parameter to enter (IP Address, for
example), and then press v button. Use
the number keypad on your remote control to
enter the numbers for the parameter. You can
also enter numbers using the ▲▼ buttons.
Use the ◄► buttons on the remote control
to move from entry field to entry field within a
parameter. When done with one parameter,
press the v button.
7.	 Press the ▲ or ▼ button to move to another
parameter, and then enter the numbers for
that parameter following the instructions in
Step 6.
8.	 Repeat Steps 6 and 7 until you have filled in
all parameters.
|
| NOTE |
\
\ You can get the Network parameters from your Internet
provider.
9.	 When finished, select OK, and then press the
v button. The Security Screen appears.
10.	 On the Security screen, enter your network's
Security Code or Pass Phrase. Enter
numbers directly using the number buttons
on your remote control. Enter letters by
selecting a letter with the ▲▼◄► buttons,
and then pressing the v button.
11.	 When finished, select Done at the right of the
screen, and then press the v button.
The product verifies the network connection
and then connects to the network.
12.	 After the product verifies the network, select
OK, and then press the v button.
Ğ
Ğ WPS(PBC)
1.	 In the Home screen, select Settings, and
then press the v button.
2.	 Select Network, and then press the v
button.
3.	 Select Network Settings, and then press the
v button.
4.	 Select Wireless in the Network Settings
screen, and then press the v button.
5.	 Press the ▲ button on your remote, and then
press the ► button to select WPS(PBC).
6.	 Press the v button on your remote. The
"Press the PBC button on your wireless
router within the next two minutes." message
appears.
7.	 Press the WPS(PBC) button on your router
within two minutes. Your product automatically
acquires all the network settings values it
needs and connects to your network.
The Network Status screen appears.
The product connects to the network after
the network connection is verified.
Page: 22
23 English
04
Settings
Ğ
Ğ WPS PIN
Before you begin, open the router's setup menu
on your PC and access the screen with the WPS
PIN entry field.
1.	 In the Home screen, select Settings, and
then press the v button.
2.	 Select Network, and then press the v
button.
3.	 Select Network Settings, and then press the
v button.
4.	 Select Wireless in the Network Settings
screen, and then press the v button.
The product searches for and then displays a
list of the available networks.
5.	 Select the desired network, and then press
the v button.
6.	 Select the WPS PIN, and then press the
v button. The PIN pop-up appears.
7.	 Enter the PIN into the WPS PIN entry field in
the router's set up screen and then save the
the screen.
|
| NOTES |
\
\ Contact the manufacturer of the router for instructions
explaining how to access the route's set up screens or
refer to the router's user's manual.
\
\ For a WPS connection, set your wireless router's security
encryption method to AES. WPS connections do not
support WEP security encryption.
Wi-Fi Direct
This function allows you to connect Wi-Fi Direct
devices to the product and each other using a
peer-to-peer network, without a wireless router.
|
| NOTE |
\
\ Bluetooth transmissions can interfere with the Wi-Fi
Direct signal. Before you use the Wi-Fi Direct function,
we strongly recommend that you turn off the Bluetooth
function of any active mobile device.
1.	 Turn on the Wi-Fi direct device and activate
its Wi-Fi Direct function.
2.	 In the Home screen, select Settings, and
then press the v button.
3.	 Select Network, and then press the v
button.
4.	 Select Wi-Fi Direct, and then press the v
button.
The Wi-Fi Direct devices that you can
connect appear.
|
| NOTES |
\
\ The current wired or wireless network connection will be
disconnected when you use the Wi-Fi Direct function.
\
\ Text files, such as files with a .TXT or .DOC extension, will
not display when you are using the Wi-Fi Direct function.
Upgrading Software
This menu allows you to upgrade the product's
software for performance improvements or
additional services.
•	Never turn the product off or back on manually during
the update process.
1.	 In the Home screen, select Settings, and
then press the v button.
2.	 Select Support, and then press the v
button.
3.	 Select Software Update, and then press the
v button.
4.	 To download update software and update
now, select Update now, and then press the
v button.
5.	 To let the product download update software
automatically when available, select Auto
Update, and then press the v button. See
"Auto Update" on page 24 for details.
Page: 23
24 English
Settings
|
| NOTES |
\
\ The upgrade is complete when the product turns off, and
then turns on again by itself.
\
\ Samsung Electronics takes no legal responsibility for
any product malfunction caused by an unstable Internet
connection or consumer negligence during a software
Update.
\
\ If you want to cancel the upgrade while the upgrade
software is downloading, press the v button.
\
\ When a system upgrade is in progress, "UPDATE" is
displayed on the front panel.
Update now
You can use Update now to update the software
through your network connection or by using a
USB flash drive. The network instructions are
below. The USB flash drive instructions are in the
next column.
1.	 Select Update now, and then press the v
button.
The Update now pop-up appears.
2.	 The product searches on line for the latest
software version.
3.	 If it finds a new version, the Update Request
pop-up appears.
4.	 Select Yes. The product upgrades the
software, turns off, and then turns on
automatically.
5.	 If you do not select Yes or No in one minute,
the product stores the new upgrade software.
You can upgrade the software later using
Auto Update.
6.	 If you select No, the product cancels the
upgrade.
|
| NOTES |
\
\ When the system upgrade is done, check the software
details in the Product Information section of the Contact
Samsung screen.
\
\ Do not turn off the product during the Software Update.
It may cause the product to malfunction.
Auto Update
You can set the Auto Update function so that the
product downloads new upgrade software when it
is in Auto Update mode.
This allows the product to download upgrade
software automatically, when you are not using it.
1.	 Press the ▲▼ buttons to select Auto
Update, and then press the v button.
2.	 Select On / Off.
|
| NOTE |
\
\ To use the Auto Update function, your product must be
connected to the Internet.
Update by USB
To upgrade by USB, follow these steps:
1.	 Visit www.samsung.com.
2.	 Click OWNERS & SUPPORT > MANUALS &
DOWNLOADS on the top right of the page.
3.	 Enter the product's model number into the
search field. As you enter the model number,
a drop down will display products that match
the model number.
4.	 Left click your product's model number in the
drop down list.
5.	 On the page that appears, click Downloads.
6.	 Find Upgrade File (USB type) under
Description.
7.	 Click the ZIP button in the File column on the
right side of the page.
8.	 Click Send in the pop-up that appears to
download and save the firmware file to your
PC.
Page: 24
25 English
04
Settings
9.	 Unzip the zip archive to your computer. You
should have a single folder with the same
name as the zip file.
10.	 Copy the folder to a USB flash drive.
11.	 Make sure no disc is inserted in the product,
and then insert the USB flash drive into the
USB port of the product.
12.	 In the product’s menu, go to Settings >
Support > Software Update.
13.	 Select Update now.
14.	 The product searches for the software on the
USB drive. When it finds the software, the
Update Request pop-up appears.
15.	 Select Yes. The product upgrades the
software, turns off, and then turns on
automatically.
|
| NOTES |
\
\ There should be no disc in the product when you upgrade
the software using the USB jack.
\
\ When the system upgrade is done, check the software
details in the Product Information section of the Contact
Samsung screen.
\
\ Do not turn off the product during the Software Update.
It may cause the product to malfunction.
\
\ Software Updates using the USB jack must be performed
with a USB flash memory stick only.
Page: 25
26 English
Media Play
Your Blu-ray product can play content located on
Blu-ray/DVD/CD discs, USB devices, PCs, smart
phones, tablets, and on the Web.
To play content located on your PC or a mobile
device, you must connect the PC or mobile device
and the product to your network. To play content
on your PC, you must install DLNA software or
already have DLNA software installed on your PC
and connect the BD Player to your PC via your
network.
|
| NOTE |
\
\ PCs running Windows 7 and Windows 8 have DLNA
software (Play To) built in.
Playing Commercial Discs
1.	 Press the 8 button to open the disc tray.
2.	 Place a disc gently into the disc tray with the
disc’s label facing up.
3.	 Press the 8 button to close the disc tray.
Playback starts automatically.
4.	 If playback does not start automatically, press
the 6 button on the remote control.
Disc Storage & Management
•	Holding Discs
-
- Fingerprints or scratches on
a disc may reduce sound and
picture quality or cause skipping.
-
- Avoid touching the surface of a disc where
data has been recorded.
-
- Hold the disc by the edges so that fingerprints
will not get on the surface.
-
- Do not stick paper or tape on the disc.
•	Cleaning Discs
-
- If you get fingerprints or dirt on a
disc, clean it with a mild detergent
diluted in water and wipe with a
soft cloth.
-
- When cleaning, wipe gently from the inside to
the outside of the disc.
•	Disc Storage
`
` Do not keep in direct sunlight.
`
` Keep in a cool ventilated area.
`
` Keep in a clean protective jacket and store
vertically.
Playing Photos, Videos, and Music
(Multimedia)
You can play media content saved on a USB
device, smartphone, camera, or computer on the
product.
|
| NOTES |
\
\ You cannot play media content if the content or the
storage device is not supported by the product.
\
\ Backup important files before connecting a USB device.
Samsung is not responsible for damaged or lost files.
Playing Media Content Saved on a USB
Device
1.	 Connect your USB device to the product.
2.	 Press the HOME button and select Storage
in the MULTIMEDIA panel. The USB devices
connected to the product are listed.
3.	 Select the device you want to connect to.
The folders and files in the selected USB are
listed.
4.	 Select the media content you want to play
from the list. The media content plays.
|
| NOTE |
\
\ Alternatively, select the Media Type you want to play
(Videos, for example), then select the file you want to play,
and then press the 6 button to play the content.
Page: 26
27 English
05
Media
Play
5.	 To exit, press the 5 button or RETURN
button.
|
| NOTE |
\
\ If you connect a USB device to the product, a popup
window appears on the screen so that you can easily
navigate the folders and files of the USB device.
Playing Media Content Saved in a
Computer/Mobile Device
You can play media content stored in a computer
or mobile device connected to the same network
as the product on the product.
|
| NOTES |
\
\ Only available with Samsung phones supporting DLNA
functionality.
\
\ You may experience compatibility issues when attempting
to play media files via a third-party DLNA server.
\
\ The content shared by a computer or a mobile device
may not play depending on the encoding type and file
format of the content. In addition, some functions may not
be available.
\
\ The media content may not play smoothly depending on
the network status. If the content does not play smoothly,
use a USB storage device.
1.	 Connect the smart device and product.
2.	 Press the HOME button and select Network
Device in the MULTIMEDIA panel. Storage
devices connected to the same network as
the product are listed.
3.	 Select a desired storage device. The folders
and files shared by the selected storage
device are listed.
4.	 Select the media content you want to play
from the list. The media content plays.
|
| NOTE |
\
\ Alternatively, select the Media Type you want to play
(Videos, for example), select the file you want to play, and
then press the 6 button to play the content.
5.	 To exit, press the 5 button or RETURN
button.
Allowing a Connection with a Mobile Device
(HOME → Settings → Network → Multimedia
Device Settings)
To play the media content stored on a mobile
device, you must allow the connection between
the mobile device and the product.
|
| NOTE |
\
\ You can connect to a mobile device on any DLNA DMC
device. DLNA DMC function enables users to connect a
mobile device to the product, search for media content,
and control play operations on the product.
1.	 Navigate to Settings > Network and select
Multimedia Device Settings. The mobile
devices connected to the same network as
the product are listed.
2.	 Allow connection with the device you wish
to connect to the product. You can only
play media files from devices that have been
allowed to connect to the product.
|
| NOTE |
\
\ If a mobile device requests to play media content, the
connection confirmation window appears on the TV
connected to the product so that you can easily connect
the mobile device.
Playing a Disc with User Recorded
Content
You can play multimedia files you have recorded
on Blu-ray, DVD, or CD discs.
1.	 Place a user recorded disc into the disc
tray with the disc’s label facing up, and then
close the tray. The Device Connected pop-up
appears.
2.	 Use the ▲▼ buttons to select the type of
content you want to view or play -
All, Photos, Videos or Music - and then
press the v button.
Page: 27
28 English
Media Play
|
| NOTE |
\
\ Even though the product will display folders for all content
types, it will only display files of the Content Type you
selected in Step 2. For example, if you selected music,
you will only be able to see music files. You can change
this selection by returning to the MULTIMEDIA screen
and repeating Step 2.
3.	 A screen appears listing the contents of the
disc. Depending on how the contents are
arranged, you will see either folders, individual
files, or both.
4.	 If necessary, use the ▲▼◄► buttons to
select a folder, and then press the v button.
5.	 Use the ▲▼◄► buttons to select a file to
view or play, and then press the v button.
6.	 Press the RETURN button one or more times
to exit a current screen, exit a folder, or to
return to the Home screen.
Press the EXIT button to return directly to the
Home Screen.
7.	 Go to pages 29~36 for instructions that
explain how to control playback of videos,
music, and pictures on a disc.
Page: 28
29 English
05
Media
Play
Controlling Video Playback
You can control the playback of video content located on a Disc, USB, mobile device or PC. Depending
on the disc or contents, some of the functions described in this manual may not be available.
Buttons on the Remote Control used for Video Playback
„
„ Using the disc menu, title menu, popup
menu, and title list
DISC MENU
button
During playback, press this button to
display the Disc menu.
TITLE MENU
button
During playback, press this button to
display the Title menu.
•	If your disc has a playlist, press View
to go to the playlist.
POPUP MENU
button
During playback, press this button to
display the Popup menu.
Using the Settings Menu During
Playback
During playback or in pause mode, press the
TOOLS button.
Use the ▲▼◄► buttons to select the and
then press the E button.
Play from the
Beginning
Select to return to the beginning of the
movie, and then press the v button.
Select Scene
-
- Search Titles : If there is more than
one movie on the disc or device,
select to start a different title.
1.	 Select Search Titles, and then
press the v button.
2.	 Use the ▲▼ buttons to select
a title, and then press the v
button.
|
| NOTE |
\
\ When searching DVD title, in stop
mode, enter the INFO button and
title number (01,02,...) you want.
„
„ Playback related buttons
The product does not play sound in Search, Slow
or Step mode.
•	To return to normal speed playback, press the
6 button.
6 button Starts playback.
5 button Stops playback.
7 button Pauses playback.
Fast Motion
Play
During playback, press the 3 or 4
button.
Each time you press the 3 or 4
button, the playback speed will change.
Slow Motion
Play
In pause mode, press the 4 button.
Each time you press the 4 button, the
playback speed will change.
Step Motion
Play
In pause mode, press the 7 button.
Each time you press the 7 button, a
new frame appears.
Skip Motion
Play
During playback, press the 1 or 2
button.
Each time you press 1 or 2 button,
the disc moves to the previous or next
chapter or file.
APPS
PANDORA DIGITAL SUBTITLE INPUT
HOME
1
4
7
VOL+
2
5
8
0
VOL–
3
6
9
SOURCE
DISC MENU
SMART
TITLE MENU
VOL VOL
POPUP
A B C D
SEARCH FULL
SUBTITLE
SCREEN
SAMSUNG TV
– +
INFO
TOOLS
RETURN EXIT
HOME
AUDIO
REPEAT
HUB
Page: 29
30 English
Media Play
Select Scene
-
- Search Chapters : Select to play
the chapter of your choice.
1.	 Select Search Chapters, and then
press the v button.
2.	 Use the ▲▼ buttons to select a
chapter, and then press the v
button.
-
- Search Time Bar : Select to play
the movie from a selected time
point.
1.	 Select Search Time Bar, and then
press the v button.
2.	 Using the number buttons, enter
the time point you want to go to,
and then press the v button.
|
| NOTE |
\
\ You can also use the ◄► buttons
to advance or rewind the movie.
The movie advances or rewinds
one minute each time you press the
◄► buttons.
\
\ If the index information in the file
is damaged or the file does not
support indexing, you will not be
able to use the Select Scene
function.
\
\ If you run files on a network device
after you have connected the player
to a computer on your network,
Select Scene may not work.
3D
Use the 3D menu when playing a 3D
file.
|
| NOTE |
\
\ The 3D menu becomes available
only when you are playing a 3D
video file.
\
\ When playing a 3D video, set the
player to Side by Side or Top and
Bottom in 3D Settings so that the
player's settings match the 3D
content format.
\
\ If you move to the Home or Smart
Hub Home screen while in 3D
mode, the product will switch to 2D
automatically.
Search
-
- Search Scene : You can use the
Search Scene function during
playback to view or start a movie
from the scene of your choice.
-
- Search Titles : If there is more than
one movie on the disc or device,
select to start a different title.
-
- Search Time Bar : Select to play
the movie from a selected time point.
Subtitle
Settings
Lets you set the desired subtitle
options.
Repeat mode
Lets you repeat a title, chapter, or
specific section.
Full Screen Lets you set the size of the video image.
Picture Mode
Lets you set the picture mode.
-
- Dynamic : Increases sharpness and
brightness.
-
- Standard : Choose this setting for
most viewing applications.
-
- Movie : The best setting for
watching movies.
-
- User : Lets you adjust the sharpness
and noise reduction function
respectively.
|
| NOTE |
\
\ When you use the BD wise function,
this menu will not appear.
Audio Use to set the desired audio language.
Audio Sync Select to adjust the audio sync.
Subtitle
Use to set the desired subtitle
language.
Angle
Lets you view a scene from another
angle. The Angle option displays the
number of angles available to view.
When a Blu-ray Disc/DVD contains
multiple angles of a particular scene,
you can change to another angle.
Information Lets you view video file information.
Page: 30
31 English
05
Media
Play
BONUSVIEW
Video Use to set the desired bonusview
option.
BONUSVIEW
Audio
|
| NOTE |
\
\ Depending on the disc or storage device, the menu may
differ.
\
\ Video files with high bitrates of 20Mbps or more strain
the product's capabilities and may stop playing during
playback.
Using the Sort by & Options Menus
Using the Sort by Menu
On a file screen containing video files, select
and then press the v button.
Date
Groups all the the video files on the
media or storage device by date. Click
a group to see the videos in that group.
Title
Displays all the video files on the media
or storage device by title.
Folder
Displays all the folders on the media or
storage device in alphabetical order.
|
| NOTE |
\
\ Depending on the disc or storage device, the menu may
differ.
Using the Options Menu
On a file screen containing video files, select
and then press the v button.
Play Selected
Lets you select specific files to play.
It works essentially the same for all
media.
Send
Select this menu to upload selected
files to a web site (Picasa, Facebook
etc) or device. To use this menu, you
need to establish an account with the
on-line site, and then log in using the
Log In function. See "Using the Send
Function" on page 36.
Controlling Music Playback
You can control the playback of music content
located on a Disc, USB, mobile device or PC.
Depending on the disc or contents, some of the
functions described in this manual may not be
available.
Buttons on the Remote Control used
for Music Playback
APPS
PANDORA DIGITAL SUBTITLE INPUT
HOME
1
4
7
VOL+
2
5
8
0
VOL–
3
6
9
SOURCE
DISC MENU
SMART
TITLE MENU
VOL VOL
POPUP
A B C D
SEARCH FULL
SUBTITLE
SCREEN
SAMSUNG TV
– +
INFO
TOOLS
RETURN EXIT
HOME
AUDIO
REPEAT
HUB
1
4
2
5
6
3
1
NUMBER buttons : Press the number of a track. The
selected track is played.
2 12 buttons : Move to the previous/next track.
3 5 button : Stops a track.
4
Fast Play (Audio CD (CD-DA) only)
During playback, press the 3 or 4 button.
Each time you press the 3 or 4 button, the
playback speed will change.
5 7 button : Pauses a track.
6 6 button : Plays the currently selected track.
|
| NOTE |
\
\ If you don't press a button within five seconds of inserting
an Audio CD, the screen is displayed in Full Screen mode.
To go back to the Play List screen, press the RETURN
button on the remote control.
Page: 31
32 English
Media Play
Using the Options Menu During
Playback
On the music file playback screen, use the ▲▼◄►
buttons to select the and then press the v
button.
Play Selected
Lets you create a playlist by selecting
specific tracks to play. It works
essentially the same way for all media.
See "Creating a Playlist from an Audio
CD" on page 33.
Ripping
This function converts CD audio to the
mp3 format and saves the converted
files on a USB device or a mobile
device connected to the product. See
"Ripping" on pages 33~34.
Information Select to see the (Contents) information.
|
| NOTE |
\
\ Depending on the disc or storage device, the menu may
differ.
Using the Sort by & Options Menus on
a File Screen
Using the Sort by Menu
On a file screen containing music files, select the
and then press the v button.
Track
Displays all the music tracks on the
media or storage device in alphabetical
order.
Album
Displays all music on the media or
storage device by album.
Artist
Displays all the the music files on the
media or storage device by artis.
Genre
Displays all the music on the media or
storage device by genre.
Folder
Displays all the folders on the media or
storage device.
|
| NOTE |
\
\ Depending on the disc or storage device, the menu may
differ.
Using the Options Menu
On a file screen containing music files, select the
and then press the v button.
Play Selected
Lets you select specific tracks to play.
It works essentially the same for all
media.
See the "Repeating Tracks on an Audio
CD" on page 33.
Send
Select to send selected files to other
devices. See "Using the Send Function"
on page 36.
Encoding
Select to manage the text encoding
options.
Add to Playlist Select to create a playlist.
|
| NOTE |
\
\ Depending on the disc or storage device, the menu may
differ.
Page: 32
33 English
05
Media
Play
Repeating Tracks on an Audio CD
You can set the product to repeat tracks on an
audio CD (CD-DA/MP3).
1.	 On the Playback screen, use the ▲▼◄►
buttons to select in the lower left corner
of the screen, and then press the v button.
2.	 Use the ▲▼ to select the repeat mode you
want - Off, One Song, or All - and then
press the v button.
00:00:39 00:02:38
TRACK 001
TRACK 001	 00:43
TRACK 002	 03:56
TRACK 003	 04:41
TRACK 004	 04:02
TRACK 005	 03:43
TRACK 006	 03:40
TRACK 007	 04:06
TRACK 008	 03:52
TRACK 009	 03:04
TRACK 010	 04:02
Shuffling Tracks on an Audio CD
You can set the product to play tracks on an audio
CD (CD-DA/MP3) at random.
1.	 On the Playback screen, use the ▲▼◄►
buttons to select in the lower left corner
of the screen, and then press the v button.
2.	 Use the ▲▼ to set the Shuffle mode On or
Off, and then press the v button.
Creating a Playlist from an Audio CD
1.	 With the Playback screen displayed, select
the and then press the v button. The
Settings menu appears.
2.	 Use the ▲▼ buttons to select Play Selected,
and then press the v button.
3.	 Use the ▲▼ buttons to select a track, and
then press the v button. A check appears
to the left of the track.
4.	 Repeat Step 3 to select and check additional
tracks.
5.	 To remove a track from the list, move to the
track, and then press the v button again.
The check on the track is removed.
6.	 When done, press the ▲▼ button to select
Play, and then press the v button. The
Music Playback screen reappears listing only
the tracks you checked. The selected tracks
play automatically.
|
| NOTES |
\
\ You can create a playlist with up to 99 tracks on Audio
CDs (CD-DA).
\
\ On the Selection Play screen, you can also choose Select
All, Clear All, and Cancel.
-
- Use Select All to select all tracks. This cancels
your individual track selections. When you press the
RETURN button on your remote control or select the
Play button, and then press the v button, all tracks
will appear on the Music Playback screen, and the
product will begin to play all tracks from Track 001.
-
- Use Clear All to deselect all selected tracks at once.
Then, select individual tracks or use Select All to
select all the tracks, and then press the RETURN
button on your remote control. If you do not use Select
All or select individual tracks, the Playlist will not
change.
-
- Cancel cancels any changes you made on the Play
Select screen. When you return to the Playback screen,
the Playlist will be unchanged.
Ripping
1.	 Insert a USB device into the USB jack on the
front of the product.
2.	 With the Playback screen displayed, select
the and then press the v button. The
Settings menu appears.
3.	 Use the ▲▼ buttons to select Ripping, and
then press the v button.
Page: 33
34 English
Media Play
4.	 Use the ▲▼ buttons to select a track, and
then press the v button. A check appears
to the left of the track.
5.	 Repeat Step 4 to select and check additional
tracks.
6.	 To remove a track from the list, move to the
track, and then press the v button again.
The check on the track is removed.
7.	 When done, select the Rip using the ▲▼
buttons, and then press the v button. The
Rip pop-up appears.
8.	 Use the ▲▼ buttons to select the device to
store the ripped files to, and then press the
v button.
|
| NOTE |
\
\ Do not disconnect the device while ripping is in progress.
9.	 If you want to cancel ripping, press the v
button and then select Yes. Select No to
continue ripping.
10.	 When ripping is complete, the "Successfully
Ripped." message appears. Press the v
button.
11.	 Press the RETURN button or select Cancel,
and then press the v button to go back to
the Playback screen.
|
| NOTES |
\
\ This function does not work with DTS Audio CDs.
\
\ This function may not be supported by some discs.
\
\ Ripping encodes music into the .mp3 format at 192kbps.
\
\ On the Ripping screen, you can also choose Select All
and Clear All.
\
\ Use Select All to select all tracks and press the v
button. This cancels your individual track selections.
\
\ Use Clear All to deselect all selected tracks at once.
Playing Photo Contents
You can play photo contents located on a DVD,
USB, mobile device or PC.
Using the Tools Menu During Playback
During playback or in pause mode, press the
TOOLS button.
Use the ▲▼◄► buttons to select the and
then press the v button.
Slideshow
Settings
Select to change the Slide Show
settings.
-
- Speed : Select to set the slide show
speed.
-
- Effects : Select to set the slide show
effect.
Rotate
Select to rotate the picture. (This can
rotate the picture either clockwise or
counter clockwise.)
Zoom
Select to enlarge the current picture.
(Enlarge up to 4 times)
Picture Mode
Select to set the picture mode.
-
- Dynamic : Choose this setting to
increase Sharpness.
-
- Standard : Choose this setting for
most viewing applications.
-
- Movie : This is the best setting for
watching movies.
-
- User : Lets you adjust the sharpness
and noise reduction function
respectively.
|
| NOTE |
\
\ This menu cannot be displayed
when you use the BD Wise function.
Background
Music
Select to listen to music while viewing
a slide show.
|
| NOTE |
\
\ The number of music files available
from external devices will differ
depending on the device.
Send
Select to send the selected file to other
devices.
Information Select to see the (Contents) information.
Page: 34
35 English
05
Media
Play
|
| NOTES |
\
\ Depending on the disc or storage device, the menu may
differ.
\
\ To enable the Background Music function, the photo file
must be in the same storage media as the music file.
Note that the sound quality can be affected by the bitrate of
the MP3 file, the size of the photo, and the encoding method.
\
\ You can't enlarge the subtitle and PG graphic in the full
screen mode.
Using the Sort by & Options Menus
Using the Sort by Menu
On a file screen containing photo files, select the
and then press the v button.
Date
Groups all the the photo files on the
media or storage device by date.
Click a group to see the photos in that
group.
Title
Displays all the photo files on the
media or storage device by title.
Folder
Displays all the folders on the media or
storage device.
|
| NOTE |
\
\ Depending on the disc or storage device, the menu may
differ.
Using the Options Menu
On a file screen containing photo files, select the
and then press the v button.
Slide Show
Starts the slide show. Shows all the
files in the current folder, one after
another. If you want to create a slide
show with a selected group of photos,
see Play Selected below.
Play Selected
Lets you select specific photos to see.
It works essentially the same for all
media.
See "Creating a Playlist from an Audio
CD" on page 33 for instructions.
Send
Select this menu to upload selected
files to a web site (Picasa, Facebook
etc) or device. To use this menu, you
need to establish an account with the
on-line site, and then log in using the
Log In function.
See "Using the Send Function" on page
36.
|
| NOTE |
\
\ Depending on the disc or storage device, the menu may
differ.
Page: 35
36 English
Media Play
Send files
Copying Videos, Music or Photos
Contents
DISC/Network
Device  USB
DISC/USB 
Network Device
Music Supported Supported
Photos Supported Supported
Videos Supported Supported
•	Disc (CD-DA/CD-R/CD-RW, DVD±R (Finalized)/
DVD+RW/DVD-RW (Finalized))  USB
•	PTP USB is not available when you copy to
USB.
Using the Send Function
You can upload files to a Network Device, or a
device.
1.	 With the Videos, Music or Photos file screen
displayed, and then press the . The
Options menu appears.
2.	 Use the ▲▼ buttons to select Send, and
then press the v button.
3.	 Use the ▲▼◄► buttons to select a file, and
then press the v button. A check appears
to the left of the file.
4.	 Repeat Step 3 to select and check additional
files.
5.	 To remove a file from the list, move to the file,
and then press the v button again.
The check on the file is removed.
6.	 When done, press the ▲▼◄► button to
select Send, and then press the v button.
The Send pop-up appears listing the on-line
sites (Picasa, Facebook, etc.) or devices that
you can send the files to.
7.	 Select a destination, and then press the v
button.
8.	 If you are sending the files to an on-line site,
the site starts. Log in and follow the directions
on the screen.
|
| NOTE |
\
\ To send files to an on-line site you must have an account
with that site.
Page: 36
37 English
06
Network
Services
Network Services
You can enjoy various network services such as
streaming video or on-line apps by connecting the
product to your network.
To use network services, you must first:
1.	 Connect the product to a network.
(See page 13)
2.	 Configure the network settings.
(See pages 20~23)
Creating a Samsung Account
Create a Samsung account so you can take
advantage of all Samsung has to offer on line.
Set up accounts for each household member so
each member can access their own accounts on
Facebook, Twitter, etc. You also need a Samsung
account if you want to download for-pay apps and
rent movies.
1.	 On the Home screen, press the . The Sign
In screen appears.
2.	 Select Create Account, and then press the
v button.
The Samsung account Terms & Conditions,
Privacy Policy screen appears.
3.	 Press the v button to agree, press the ►
button, and then press the v button.
The Create Account screen appears.
4.	 Select the ID field, and then press the v
button. The keyboard pop-up appears.
5.	 Enter your e-mail address using the
keyboard. Use the arrow buttons to move
from character to character.
Press v to select a character. Select the
Caps on the left to enter capitals. Select the
123#& to select additional symbols.
6.	 When finished, select the Done on the
keyboard, and then press the v button.
The Create Account screen reappears.
7.	 Enter a password, your first name, and last
name in the same fashion.
8.	 Select the Date of Birth field, and then select
numbers using the up and down arrow
buttons or by pressing numbers on your
remote. Press the v button when done.
9.	 After you have finished with all the fields,
press the ► button, and then press the v
button. Connecting appears, and then the
account confirmation message.
10.	 Press the v button. The Set Profile Picture
screen appears.
|
| NOTE |
\
\ Samsung sends a confirming e-mail to the address
you entered. You must open the e-mail and respond as
requested to finalize your account.
11.	 Select a picture to identify your account, and
then press the v button. The Account
Created screen appears.
12.	 Press the v button. The Home screen
appears.
Page: 37
38 English
Network Services
Before Using Samsung Apps
If you haven’t set up Smart Hub, when you use
Apps for the first time, the product will ask you to
perform the Smart Hub set up procedure.
1.	 On the Home screen, select SAMSUNG
APPS, and then press the v button.
2.	 If you haven't set up Smart Hub, the Smart
Hub pop-up appears asking if you want to
set up Smart Hub. Select Yes, and then
press the v button.
3.	 Select Start, and then press the v button.
The Terms and Policy screen appears.
4.	 On the Additional Services, Terms and
Conditions and Choices screen, you must
review and agree to both the Smart Hub
Terms and Conditions and the Privacy Policy
to use Smart Hub.
5.	 Scroll down, and then click the View details
to review the full documents.
|
| NOTE |
\
\ You do not need to consent to the Supplemental
Privacy Notice, but one or more Smart TV features or
functionalities may not be available if you do not.
6.	 Select I agree to all, and then press the v
button. The Setup Complete screen appears.
Press the v button.
Using Samsung Apps
You can download applications from the Internet,
and access various application and view them on
your TV. To access some applications, you need
to have a Samsung account.
The Samsung Apps Screen at a Glance
Most Popular What's New Categories
SAMSUNG APPS
2
2
3
3
4
4
5
5 6 7 9
8 10
1
WebBrowser
MY APPS
RECOMMENDED
1 2
3
1
RECOMMENDED : Displays recommended
contents managed by Samsung. You cannot delete
Recommended Apps.
2
MY APPS : Displays your personal gallery of
applications modifiable on the MY APPS screen.
3
Most Popular, What’s New and Categories :
Select to view and download additional apps.
The first time you open the SAMSUNG APPS
screen, the Blu-ray player automatically downloads
a group of free apps. Once these apps have been
downloaded, they appear on the SAMSUNG
APPS screen.
To see additional apps, select Most Popular,
What's New, or Categories on the bottom of the
screen, and then press the v button.
Most Popular displays the most popular apps,
What's New the newest. Categories displays a
series of icons representing categories such as
Videos, Games, and Sports. Select a category
icon, and then press the v button. The Blu-ray
player displays the apps in that category.
Page: 38
39 English
06
Network
Services
Downloading an App
1.	 Select Most Popular, What's New, or
Categories, and then press the v button.
2.	 If you selected Categories, select a category
icon, and then press the v button.
Otherwise, go to Step 3.
|
| NOTE |
\
\ On the Most Popular, What's New, and Categories
screens, a green arrow is displayed on apps you have
already downloaded.
3.	 Select an app you want to download,
and then press the v button. The Detail
Information screen for the app appears.
4.	 Select the Download on the screen, and then
press the v button. Download changes to
Cancel and the app begins to download.
5.	 If you want to cancel the download, select
Cancel, and then press the v button.
6.	 When the download is complete, Cancel
changes to Open. Select Open, and then
press the v button to start the application.
Alternately, press the RETURN button until
the SAMSUNG APPS screen reappears.
The app you downloaded will be displayed
on the SAMSUNG APPS screen under MY
APPS.
|
| NOTE |
\
\ If the App cannot be downloaded due to insufficient
remaining internal memory, connect a USB storage device
and try again.
Starting an Application
1.	 Select SAMSUNG APPS on the Home
screen, and then press the v button.
2.	 On the SAMSUNG APPS screen, use the
▲▼◄► buttons to select an app, and then
press the v button. The app starts.
The Options Menu
Move
1.	 On the MY APPS screen, select the app you
want to move, and then press the v button
for 3 seconds.
2.	 Select Move, and then press the v button.
3.	 Use the ▲▼◄► buttons to move the app.
4.	 When the app is where you want it, press the
v or EXIT button.
Delete
1.	 On the MY APPS screen, select the app you
want to delete, and then press the v button
for 3 seconds.
2.	 Select Delete, and then press the v button.
3.	 Use the ◄► buttons to select Yes, and then
press the v button.
Multi Delete
1.	 On the MY APPS screen, select an app you
want to delete, and then press the v button
for 3 seconds.
2.	 Select Multi Delete, and then press the v
button.
3.	 Use the ▲▼◄► buttons to select apps
you want to delete, and then press the v
button. A check appears next to each app
you select.
|
| NOTE |
\
\ You can deselect an app by highlighting it again, and then
pressing the v button.
4.	 Use the ▼ button to select Delete at the
bottom of the screen, and then press the v
button.
|
| NOTE |
\
\ You can also select Cancel, Select All, or Deselect All at
the bottom of the screen.
Page: 39
40 English
Network Services
View Details
1.	 On the MY APPS screen, select the app
you want to see detailed information for, and
then press the v button for 3 seconds. The
Options menu appears.
2.	 Select View Details, and then press the v
button.
Change View
This function toggles the Apps screen between
the Most Played view and the Custom View, which
lets you arrange the apps to your liking.
1.	 On the MY APPS screen, select an app, and
then press the v button for 3 seconds.
2.	 Select Change View, and then press the v
button.
3.	 Select Yes if you want to change the view.
Select No if you want to keep the current
view.
4.	 Press v button.
Lock/Unlock
This function blocks access to an app unless you
enter your PIN. Unlock removes the lock.
1.	 On the MY APPS screen, select an app you
want to lock, and then press the v button
for 3 seconds.
2.	 Select Lock/Unlock, and then press the v
button. Enter your PIN.
3.	 Use the ▲▼◄► buttons to select an app
you want to lock.
4.	 Press the v button. A check appears next
to the app.
5.	 To de-select an app, highlight the app, and
then press the v button.
6.	 After you have selected all the apps you want
to lock, select Save at the bottom of the
screen, and then press v button. Locks
appear next to all the apps you selected.
|
| NOTE |
\
\ You can also select Cancel, Select All, or Deselect All at
the bottom of the screen.
To unlock apps, follow essentially the same
directions, but select apps that have locks. When
you select Save and then press the v button,
the locks are removed.
Update Apps
1.	 On the MY APPS screen, select any app,
and then press the v button for 3 seconds.
2.	 Select Update Apps, and then press the v
button.
3.	 The Update Samsung Apps screens lists all
the apps that have updates available. Select
each app you want to update, and then press
the v button. You can also choose Select
All to update all the apps listed.
4.	 Select Update, and then press the v button.
Screen Mirroring
The Screen Mirroring function lets you view the
screen of your smart phone or android tablet on
the TV that you have connected to the product.
1.	 In the Home screen, select Screen Mirroring,
and then press the v button.
2.	 Launch AllShare Cast or Screen Mirroring
on your device.
3.	 On your device, find the name of the player in
the list of available devices and then select it.
4.	 The TV displays a connecting message (for
example, Connecting to Android_92gb...) and
then displays the connected message.
5.	 In a few moments, the screen of your device
appears on the TV screen.
6.	 To stop Screen Mirroring, press the EXIT
or RETURN button on the remote control, or
exit the Screen Mirroring function on your
smart phone.
Page: 40
41 English
06
Network
Services
|
| NOTES |
\
\ You can connect your Player to a device that supports
AllShare Cast. Note that all devices that have AllShare
Cast may not be fully supported, depending on the
manufacturer. For further information on mobile
connection support, refer to the manufacturer’s web site.
\
\ When you are using the Screen Mirroring function, video
stuttering or audio dropouts may occur, depending on
your environment.
\
\ Bluetooth transmissions can interfere with the Screen
Mirroring signal. Before using the Screen Mirroring
function, we strongly recommend that you turn off the
Bluetooth function on your smart phone or smart device
(tablet, etc.).
Using the Web Browser
You can access the Internet using the Web
Browser application.
Select WebBrowser on the Home screen, and
then press the v button.
|
| NOTES |
\
\ When you run the Web Browser with the product
connected by HDMI to a BD Wise compatible TV - and BD
Wise is on - the browser is maximized to fill the screen
and the TV's resolution is set to the optimal resolution
automatically.
\
\ The Web Browser is not compatible with Java
applications.
\
\ If you attempt to download a file, and the file cannot be
saved, an error message will appear.
\
\ E-commerce (purchasing products online) is not
supported.
\
\ ActiveX is not supported.
\
\ Access may be blocked to some websites or to web
browsers operated by certain businesses.
\
\ Playing Flash videos is not supported.
Link Browsing and Pointer Browsing
The Web Browser provides two types of browsing,
Pointer Browsing and Link Browsing. When you
launch the browser for the first time, Pointer
Browsing is active. If you are using a mouse to
navigate in the Web Browser, we recommend
leaving Pointer Browsing active. If you are using
your remote to navigate in the Web Browser, we
recommend that you replace Pointer Browsing
with Link Browsing. Link Browsing moves a
highlight from one link to the next in the Web
Browser and is much faster than Pointer Browsing
if you are using your remote.
To activate Link Browsing, follow these steps:
1.	 Use the ▲▼◄► buttons on your remote to
move the pointer to the Link Browser icon on
the top right of the screen. The Link Browser
icon is the third icon from the right.
The pointer will be in the correct position
if the icon turns blue and the words “Link
Browsing” appear on the screen.
2.	 Press the v button. Link Browsing is
activated and will remain active whenever you
bring up the Web Browser.
The Control Panel at a Glance
The Control Panel, which runs across the top
of the screen, has a series of icons which start
a number of useful functions. The icons are
described below, starting with the icon on the far
left of the screen.
New Tab
http://www.samsung.com
http://www.samsung.com 100%
Page: 41
42 English
Network Services
1
•	 : Moves to the previous page.
•	 : Moves to the next web page.
•	 : Displays the Bookmarks and History
screen. You can bookmark the current page,
select an existing bookmark, and edit and delete
bookmarks. You can also view your browsing
history and select a page to revisit.
•	 : Moves to the Home screen of the Web
Browser.
•	 : Lets you enter a page
address manually using the keyboard pop-up.
•	 : Reloads the current page so that it is
refreshed on the screen.
•	 : Adds the current page to your bookmarks.
•	 : Lets you search for information
by entering words or characters using the
keyboard pop-up. See "Using the Keyboard Pop-
up" below.
•	 : Lets you enlarge or shrink the screen
by various percentages.
•	 / : Lets you switch between Pointer
Browsing and Link Browsing.
•	 : Lets you configure the Browser’s settings.
See "Using the Setting Menu" on pages 43~44.
•	 : Closes the Web Browser.
•	 http://www.samsung.com : Opens a new web
browser tab.
Using the Keyboard Pop-up
When you click the , the
or access a data or text entry field,
and then press the v button, the keyboard pop-
up appears.
To use the keyboard pop-up with your remote,
follow these steps:
100%
As you enter characters, recommended text will be shown.
	
Caps	 1	2	3	4	5	6	7	8	9	0	 :	Clear
		 q	w	 e	 r	 t	 y	 u	 i	 o	 p	^	 *	 
	123#&	 a	 s	 d	 f	 g	 h	 j	 k	 l	 ~	 @	 !	 Done
		 z	x	c	v	b	n	m	,	 .	?	-	$	Cancel
	ENG							 www.	.com	 /	 +	_	%
New Tab
http://www.samsung.com
http://www.samsung.com 100%
New Tab
http://www.samsung.com
1.	 Use the ▲▼◄► buttons on your remote to
move the highlight to a letter or number of
your choice.
2.	 Press the v button to enter the letter or
number into the entry field.
3.	 To access capital letters, move the highlight
to the Caps key on the top left, and then
press the v button. Press the v button
again with the Caps key highlighted to
access small letters again.
4.	 To access symbols and additional punctuation
marks, highlight the 123#& on the left, and
then press the v button.
5.	 To delete a character you entered, move the
highlight to the :, and then press the v
button.
6.	 To delete all the characters you entered,
move the highlight to the Clear and then
press the v button.
7.	 When finished entering, move the highlight to
the Done and then press the v button.
|
| NOTE |
\
\ If you have a wireless keyboard connected to your
product, you can use the wireless keyboard to enter
letters, numbers, symbols, and punctuation. Note that
the wireless keyboard will work only when the keyboard
popup appears and can only be used to enter letters,
numbers, symbols, and punctuation.
Options on the Keyboard Pop-Up
To access the keyboard pop-up options, highlight
the on the bottom left of the keyboard, and
then press the v button.
Language
Select the language for the keyboard.
You can select English, French,
Russian, etc.
Recommended
text
The keyboard suggests recommended
words as you enter text. You can turn
this function On or Off.
Page: 42
43 English
06
Network
Services
Reset
recommended
text data
Reset erases the Samsung Keyboard's
memory. Select Reset to erase
everything that the Samsung Keyboard
has learned about your writing style,
including any new words you have
used.
Predict Next
Letter
The keyboard predicts the next letter
as you enter letters. The predictions
appear in a ring around the letter you
have just entered. You can select a
predicted letter or move to another
letter. You can turn this function On or
Off.
Accented
character
preview
Select this if you want to type letters
with accent marks.
Using the Setting Menu
The Setting menu contains functions that control
how the Browser operates and Browser security
functions. To open the Setting menu, highlight
the icon in the Control Panel, and then press
the v button. To select an option in the Setting
menu, highlight the option, and then press the v
button.
New Tab
http://www.samsung.com
100%
http://www.samsung.com
Enable Grabbing
Approved Sites
Private Browsing On
Set Search Engine
Web Browser Setting
Help
Close
Enable
Grabbing /
Disable
Grabbing
Turns the Grabber function on and off.
When the Grabber function is on, you
can move a web page up and down
without dragging the scroll bar.
The Grabber function is only available
in Pointer Browsing.
Approved Sites
Lets you restrict your children’s access
to inappropriate web pages by allowing
access only to the web sites you have
registered.
Every time you access this function, the
PIN screen appears. The first time you
access this function, enter the default
PIN, 0000 using the number buttons
on your remote.
You can change the PIN using the
Reset password for the Approved
Sites function. See below.
Approved Sites feature : Turns the
Approved Sites function on or off.
Reset password for Approved Sites :
Change the Approved Sites password.
Add current site : Lets you add the
currently displayed web site to the
Approved Sites list.
Manage Approved Sites : Lets you
key in URLs to add to the Approved
Sites List and delete sites from the
Approved Sites list.
If you turn this function on and have
not added any sites to the Approved
Sites list, you will not be able to access
any Internet sites.
Private
Browsing Off/
Private
Browsing On
Enable or disable the Privacy mode.
When the Privacy mode is enabled,
the browser does not retain the URLs
of sites you visit. If you want to enable
Privacy mode, select Yes.
If the Privacy mode is running, the
“Stop” icon appears in front of the URL
at the top of the screen. To disable
Privacy mode, select it again when
Privacy mode is enabled.
Set Search
Engine
You can set the desired Search Engine.
Page: 43
44 English
Network Services
Web Browser
Setting
Set as homepage : You can set the
Browser's home page.
Pop-up Block : Turns the Popup Block
on and off.
Page Block : You can determine whether
to block advertisements and select the
URLs for which advertisements are
blocked.
General : You can delete personal
information such as website history
and browsing data (cookies, etc.), and
reset all web browser settings to their
factory defaults. You can also set the
Security Mode.
|
| NOTE |
\
\ Set the Security Mode to On to
avoid accessing malicious/phishing
sites and prevent malicious code
from running.
Encoding : You can set the Encoding
setting for web pages to Automatic or
select the encoding format manually
from a list.
Pointer : You can set the speed of the
cursor when the cursor is set to Pointer
and turn Smart Cursor On and Off.
Browser Information : Displays
the version number and copyright
information for the Web Browser.
Help
Provides basic information about the
operation of the Web Browser.
|
| NOTE |
\
\ Depending on the web site, some of the Web Browser
Setting functions may not be activated. Functions that
are not activated are greyed out and cannot be used.
Linking Your Internet Service
Accounts to the Product
The Link Service Accounts function lets you
link your product to your accounts with Internet
services such as Pandora so that the product can
log you in to the service automatically when you
start the app for that service.
Register your account by going to HOME  Sign
In  Create with Facebook.
BD-LIVE™
Once the product is connected to your network,
you can enjoy various movie-related service
content available on BD-LIVE compliant discs.
1.	 Attach a USB flash memory drive to the USB
jack on the front of the product, and then
check its remaining memory. The memory
device must have at least 1GB of free space
to accommodate the BD-LIVE services.
2.	 Select Settings on the Home screen, and
then press the v button.
3.	 Select Network, and then press the v
button.
4.	 Select BD-Live Settings, and then press the
v button.
5.	 Select BD Data Management, and then
press the v button.
6.	 Select Select Device, and then press the
v button.
7.	 Select USB device, and then press the v
button.
8.	 Insert a Blu-ray Disc that supports BD-LIVE.
9.	 Select an item from the list of BD-LIVE service
contents provided by the disc manufacturer.
|
| NOTE |
\
\ The way you use BD-LIVE and the provided contents may
differ, depending on the disc manufacturer.
Page: 44
45 English
07
Appendix
Appendix
Additional Information
Notes
Settings
3D Settings
•	For some 3D discs, to stop a movie during 3D playback, press the 5 (STOP) button once.
The movie stops and the 3D mode option is de-activated.
To change a 3D option selection when you are playing a 3D movie, press the 5 (STOP) button
once. The Home Screen menu appears. Press the 5 (STOP) button again, then select 3D
Settings in the Blu-ray menu.
•	Depending on the content and the position of the picture on your TV screen, you may see vertical
black bars on the left side, right side, or both sides.
TV Aspect Ratio
•	Depending on the disc type, some aspect ratios may not be available.
•	If you select an aspect ratio and option that is different than the aspect ratio of your TV screen,
the picture might appear to be distorted.
•	If you select the 16:9 Original, your TV may display 4:3 Pillarbox (black bars on the sides of the
picture).
BD Wise (Samsung Products only)
•	When BD Wise is On, the Resolution setting automatically defaults to BD Wise and BD Wise
appears in the Resolution menu.
•	If the product is connected to a device that does not support BD Wise, you cannot use the BD
Wise function.
•	For the proper operation of BD Wise, set the BD Wise option of both the product and the TV to On.
Digital Output
•	Be sure to select the correct Digital Output or you will hear no sound or just loud noise.
•	If the HDMI device (AV receiver, TV) is not compatible with compressed formats (Dolby Digital,
DTS), the audio signal outputs as PCM.
•	Regular DVDs do not have BONUSVIEW audio and Navigation Sound Effects.
•	Some Blu-ray Discs do not have BONUSVIEW audio and Navigation Sound Effects.
•	The Digital Output setup does not affect the HDMI audio output to your TV.
It affects the optical and HDMI audio output when your product is connected to an AV receiver.
•	If you play MPEG audio soundtracks, the audio signal outputs as PCM regardless of your Digital
Output selections (PCM or Bitstream).
PCM Downsampling
•	Even when PCM Downsampling is set to Off, some discs will only output downsampled audio
through the optical digital output.
•	HDMI
-
- If your TV is not compatible with compressed multi-channel formats (Dolby Digital, DTS), the
product may output PCM 2ch downmixed audio even though you selected Bitstream (either
Reencoded or Unprocessed) in the setup menu.
-
- If your TV is not compatible with PCM sampling rates over 48kHz, the product will output at
48kHz.
Page: 45
46 English
Appendix
Settings
BD-LIVE Internet Connection
•	What is a valid certificate?
When the product uses BD-LIVE to send the disc data and a request to the server to certify the
disc, the server uses the transmitted data to check if the disc is valid and sends the certificate
back to the product.
•	The Internet connection may be restricted while you are using BD-LIVE contents.
BD Data Management
•	In the external memory mode, disc playback may be stopped if you disconnect the USB device in
the middle of playback.
•	Only those USB devices formatted in the FAT file system (DOS 8.3 volume label) are supported.
We recommend you use USB devices that support the USB 2.0 protocol with 4 MB/sec or faster
read/write speed.
•	The Resume Play function may not work after you format the storage device.
•	The total memory available to BD Data Management may differ, depending on conditions.
Anynet+ (HDMI-CEC)
•	Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user
manual of your TV.
•	This function is not available if the HDMI cable does not support CEC.
•	If your Samsung TV has an Anynet+ logo, then it supports the Anynet+ function.
Media Play
Selecting the Audio Language
•	The ◄► indicator will not appear on the screen if the BONUSVIEW section does not contain any
BONUSVIEW audio settings.
•	The languages available through the Audio Language function depend on the languages that are
encoded on the disc. This function or certain languages may not be available.
•	Some Blu-ray Discs may allow you to select either the PCM or Dolby Digital audio soundtrack in
English.
Selecting the Subtitle Language
•	Depending on the Blu-ray Disc / DVD, you may be able to change the subtitle language in the
Disc Menu. Press the DISC MENU button.
•	This function depends on the selection of subtitles that are encoded on the disc and may not be
available on all Blu-ray Discs/DVDs.
•	Information about the main feature BONUSVIEW mode will also appear if the Blu-ray Disc has a
BONUSVIEW section.
•	This function changes both the primary and secondary subtitles at the same time.
•	The total number of primary and secondary subtitles, respectively, is displayed.
•	If you press the SUBTITLE button on the remote control, the subtitle bar appears.
Press the RETURN button to remove the subtitle bar.
Page: 46
47 English
07
Appendix
Resolution according to the contents type
Contents Type
Setup
Blu-ray Disc
E-contents/
Digital contents
BD Wise Resolution of Blu-ray Disc 1080p@60F
Auto
Movie Frame : Auto
UHD Output : Auto 2160p@24F 2160p@24F
UHD Output : Off 1080p@24F 1080p@24F
Movie Frame : Off Max. Resolution of TV input Max. Resolution of TV input
Movie Frame : Auto (24Fs)
※ 1080p & 1080i only
1080p@24F 1080p@24F
1080p 1080p@60F 1080p@60F
1080i 1080i 1080i
720p 720p 720p
480p 480p 480p
Contents Type
Setup
DVD
BD Wise 480i
Auto
Movie Frame : Auto
DVD 24Fs Conversion : Auto
UHD Output : Auto 2160p@24F
UHD Output : Off 1080p@24F
DVD 24Fs Conversion : Off Max. Resolution of TV input
Movie Frame : Off Max. Resolution of TV input
Movie Frame : Auto (DVD 24Fs Conversion : Auto)
※ 1080p & 1080i only
1080p@24F
1080p 1080p@60F
1080i 1080i
720p 720p
480p 480p
|
| NOTES |
\
\ If the TV you connected to the product does not support Movie Frame or the resolution you selected, the message "If no
pictures are shown after selecting 'Yes', please wait for 15 seconds to return to the previous resolution. Do you want to
change the resolution?" appears. If you select Yes, the TV's screen will go blank for 15 seconds, and then the resolution will
revert to the previous resolution automatically.
\
\ If the screen stays blank after you have changed the resolution, remove all discs, and then press and hold the @ button
on the top of the product for more than 5 seconds. The initialization message appears on the screen, the player turns off
automatically. When you turn your product on again, all the settings will be reset. Run the Initial Settings procedure again.
Then, go to Settings > Picture > Resolution in the Menu, and select the correct resolution for your TV.
\
\ When you run the Initial Settings procedure, re-select the language and aspect ratio (screen size and format) only. Resetting
does not affect your network settings, so you should be able to skip Network Setup and Software Update.
\
\ When the factory default settings are restored, all stored user BD data is deleted.
\
\ A Blu-ray Disc must have the 24 frame feature for the product to use the Movie Frame (24Fs) mode.
Page: 47
48 English
Appendix
Digital Output Selection
Setup PCM
Bitstream
(Unprocessed)
Bitstream
(Re-encoded
DTS)
Bitstream
(Re-encoded
Dolby D)
Connection
HDMI
supported
AV receiver
Optical
HDMI
supported
AV receiver
Optical
HDMI
supported AV
receiver or
Optical
HDMI supported
AV receiver or
Optical
Audio Stream
on Blu-ray
Disc
PCM
Up to PCM
7.1ch
PCM 2ch PCM PCM 2ch DTS re-encoded
Re-encoded
Dolby Digital *
Dolby Digital
Up to PCM
7.1ch
PCM 2ch Dolby Digital Dolby Digital DTS re-encoded
Re-encoded
Dolby Digital *
Dolby Digital
Plus
Up to PCM
7.1ch
PCM 2ch
Dolby Digital
Plus
Dolby Digital DTS re-encoded
Re-encoded
Dolby Digital *
Dolby TrueHD
Up to PCM
7.1ch
PCM 2ch Dolby TrueHD Dolby Digital DTS re-encoded
Re-encoded
Dolby Digital *
DTS
Up to PCM
6.1ch
PCM 2ch DTS DTS DTS re-encoded
Re-encoded
Dolby Digital *
DTS-HD High
Resolution
Audio
Up to PCM
7.1ch
PCM 2ch
DTS-HD High
Resolution
Audio
DTS DTS re-encoded
Re-encoded
Dolby Digital *
DTS-HD
Master Audio
Up to PCM
7.1ch
PCM 2ch
DTS-HD
Master Audio
DTS DTS re-encoded
Re-encoded
Dolby Digital *
Audio Stream
on DVD
PCM PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch
Dolby Digital
Up to PCM
5.1ch
PCM 2ch Dolby Digital Dolby Digital Dolby Digital Dolby Digital
DTS
Up to PCM
6.1ch
PCM 2ch DTS DTS DTS DTS
Definition for
Blu-ray Disc
Any
Decodes the main feature
audio and BONUSVIEW
audio stream together
into PCM audio and adds
Navigation Sound Effects.
Outputs only the main
feature audio stream so that
your AV receiver can decode
the audio bitstream.
You will not hear
BONUSVIEW audio or
Navigation Sound Effects.
Decodes the main
feature audio
and BONUSVIEW
audio stream
together into PCM
audio and adds
Navigation Sound
Effects, then re-
encodes the PCM
audio into DTS
bitstream.
Decodes the main
feature audio and
BONUSVIEW audio
stream together
into PCM audio and
adds Navigation
Sound Effects,
then re-encodes
the PCM audio
into Dolby Digital
bitstream or PCM.
*	If the Source Stream is 2ch or mono, "Re-encoded Dolby D" Settings are not applied. Output will be
PCM 2ch.
Blu-ray Discs may include three audio streams :
-
- Main Feature Audio : The audio soundtrack of the main feature.
-
- BONUSVIEW audio : An additional soundtrack such as the director or actor's commentary.
-
- Navigation Sound Effects : When you choose some menu navigation, Navigation Sound Effects may
sound. Navigation Sound Effects are different on each Blu-ray Disc.
Page: 48
49 English
07
Appendix
Troubleshooting
Before requesting service, please try the following solutions.
PROBLEM SOLUTION
No operation can be performed with the
remote control.
•	Check the batteries in the remote control. They may need replacing.
•	Operate the remote control at a distance of no more than 20 feet from the
product.
•	Remove the batteries and hold down one or more buttons for several
minutes to drain the microprocessor inside the remote control to reset it.
Reinstall the batteries and try to operate the remote control again.
The disc does not play. •	Ensure that the disc is installed with the label side facing up.
•	Check the region number of the Blu-ray Disc/DVD.
The disc Menu does not appear. •	Ensure that the disc has disc menus.
The prohibition message appears on the
screen.
•	This message appears when an invalid button is pressed.
•	The Blu-ray Disc/DVD's software doesn't support the feature (e.g., angles).
•	You've requested a title or chapter number or search time that is out of
range.
Play mode differs from the Setup Menu
selection.
•	Some of the functions selected in the Setup Menu may not work properly if
the disc is not encoded with the corresponding function.
The screen ratio cannot be changed. •	The Screen Ratio on your Blu-ray Disc/DVD Disc is fixed and cannot be
changed.
•	This is not a problem with the product.
No audio. •	Make sure you have selected the correct Digital Output in the Audio Options
Menu.
The screen is blank. •	If the HDMI output is set to a resolution your TV cannot support (for
example, 1080p), you may not see a picture on your TV.
•	Press the @ button (on top panel) for more than 5 seconds with no disc
inside. The initialization message appears on the screen, and the player
turns off automatically. When you turn your product on again, all the
settings will be reset.
•	When the factory default settings are restored, all stored user BD data will
be deleted.
Page: 49
50 English
Appendix
PROBLEM SOLUTION
Forgot password. •	Press the @ button (on the top panel) for more than 5 seconds with no
disc inside. The initialization message appears on the screen, and the
player turns off automatically. When you turn your product on again, all the
settings will be reset.
Don't use this unless absolutely necessary.
•	When the factory default settings are restored, all stored user BD data will
be deleted.
The picture is noisy or distorted. •	Make sure that the disc is not dirty or scratched.
•	Clean the disc.
No HDMI output. •	Check the connection between the TV and the HDMI jack of the product.
•	Check if your TV supports the 480p, 720p, 1080i or 1080p HDMI input
resolution.
Abnormal HDMI output appears on the
screen.
•	If random noise appears on the screen, it means that TV does not support
HDCP (High-bandwidth Digital Content Protection).
If you experience other problems. •	Go to the table of contents and find the section of the user manual that
contains information about the feature you are having the problem with,
and then follow the procedure again.
•	If you still cannot resolve the problem, please contact your nearest
Samsung authorized service center.
Play Multimedia on network devices
You can see folders shared on network
devices, but cannot see the files.
•	Multimedia list only shows Video, Photo, and Music files. Other types of files
are not displayed.
Video plays intermittently. •	Check if the network is stable.
•	Check if the network cable is properly connected and if the network is not
overloaded.
•	The wireless connection between the DLNA compatible device and the
product is unstable.
Check the connection.
The Network connection between the product
and the PC is unstable.
•	IP addresses within the same subnetwork should be unique.
If they are not, IP interference can cause this phenomenon.
•	Check if you have a firewall enabled.
If so, disable the firewall function.

Question & answers

There are no questions about the Samsung BD-J6300 yet.

Ask a question about the Samsung BD-J6300

Have a question about the Samsung BD-J6300 but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Samsung BD-J6300. Please make sure that you describe your difficulty with the Samsung BD-J6300 as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.