View a manual of the Samsung BD-J5700 below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.
imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register Blu-ray™ Disc Player user manual BD-J5700 ENGLISH
2 Safety Information Warning This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product. This symbol indicates that important literature concerning operation and maintenance has been included with this product. CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL. The slots and openings in the cabinet and ● ● in the back or bottom are provided for necessary ventilation. To ensure reliable operation of this apparatus, and to protect it from overheating, these slots and openings must never be blocked or covered. Do not place this apparatus in a - - confined space, such as a bookcase, or built-in cabinet, unless proper ventilation is provided. Do not place this apparatus near or - - over a radiator or heat register, or where it is exposed to direct sunlight. Do not place vessels (vases etc.) - - containing water on this apparatus. A water spill can cause a fire or electric shock. Do not expose this apparatus to rain ● ● or place it near water (near a bathtub, washbowl, kitchen sink, or pool, etc.). If this apparatus accidentally gets wet, unplug it and contact an authorized dealer immediately. This apparatus uses batteries. In your ● ● community, there might be environmental regulations that require you to dispose of these batteries properly. Please contact your local authorities for disposal or recycling information. Do not overload wall outlets, extension ● ● cords or adaptors beyond their capacity, since this can result in fire or electric shock. Route power-supply cords so that they ● ● are not likely to be walked on or pinched by items placed on or against them. Pay particular attention to cords at the plug end, at wall outlets, and the point where they exit from the apparatus. To protect this apparatus from a lightning ● ● storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the set due to lightning and power line surges. Before connecting the AC power cord ● ● to the DC adaptor outlet, make sure the voltage designation of the DC adaptor corresponds to the local electrical supply. Never insert anything metallic into the ● ● open parts of this apparatus. Doing so may create a danger of electric shock. To avoid electric shock, never touch the ● ● inside of this apparatus. Only a qualified technician should open this apparatus. Make sure to plug the power cord in ● ● until it is firmly seated. When unplugging the power cord from a wall outlet, always pull on the power cord's plug. Never unplug by pulling on the power cord. Do not touch the power cord with wet hands. If this apparatus does not operate ● ● normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and contact an authorized dealer or service center. Maintenance of Cabinet. ● ● Before connecting other components to - - this product, be sure to turn them off. If you move your product suddenly - - from a cold place to a warm place, condensation may occur on the operating parts and lens and cause abnormal disc playback. If this occurs, unplug the product, wait for two hours, and then connect the plug to the power outlet. Then, insert the disc, and try to play back again. Be sure to pull the power plug out of the ● ● outlet if the product is to remain unused or if you are leaving the house for an extended period of time (especially when children, elderly, or disabled people will be left alone in the house). Accumulated dust can cause an - - electric shock, an electric leakage, or a fire by causing the power cord to generate sparks and heat or the insulation to deteriorate. Contact an authorized service center for ● ● information if you intend to install your product in a location with heavy dust, high or low temperatures, high humidity, chemical substances, or where it will operate 24 hours a day such as in an airport, a train station, etc. Failing to do so may lead to serious damage to your product. Use only a properly grounded plug and ● ● wall outlet. An improper ground may cause - - electric shock or equipment damage. (Class l Equipment only.) To turn this apparatus off completely, ● ● you must disconnect it from the wall outlet. Consequently, the wall outlet and power plug must be readily accessible at all times. Do not allow children to hang on the ● ● product. Store the accessories (battery, etc.) in ● ● a location safely out of the reach of children. Do not install the product in an unstable ● ● location such as a shaky self, a slanted floor, or a location exposed to vibration. Do not drop or strike the product. If the ● ● product is damaged, disconnect the power cord and contact a service center. To clean this apparatus, unplug the power ● ● cord from the wall outlet and wipe the product using a soft, dry cloth. Do not use any chemicals such as wax, benzene, alcohol, thinners, insecticide, air fresheners, lubricants, or detergent. These chemicals can damage the appearance of the product or erase the printing on the product.
3 Do not expose this apparatus to dripping ● ● or splashing. Do not put objects filled with liquids, such as vases on the apparatus. Do not dispose of batteries in a fire. ● ● Do not plug multiple electric devices ● ● into the same wall socket. Overloading a socket can cause it to overheat, resulting in a fire. There is danger of an explosion if you ● ● replace the batteries used in the remote with the wrong type of battery. Replace only with the same or equivalent type. WARNING - TO PREVENT ● ● THE SPREAD OF FIRE, KEEP CANDLES AND OTHER ITEMS WITH OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES. WARNING ● ● This product contains chemicals known - - to the State of California to cause cancer and reproductive toxicity. To reduce the risk of fire or electric - - shock, do not expose this appliance to rain or moisture. FCC NOTE (for U.S.A) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. The user is encouraged to try to correct the interference by one or more of the following measures: Reorienting or relocating the receiving ● ● antenna. Increasing the separation between the ● ● equipment and receiver. Connecting this equipment to an outlet ● ● that is on a different circuit than the one the receiver is connected to. Consulting the dealer or an experienced ● ● radio/TV technician for help. This class B digital product meets all requirements of the Canadian Interference - Causing Equipment Regulations Note to CATV system installer This reminder is provided to call the CATV system installer's attention to Article 820- 40 of the National Electrical Code (Section 54 of Canadian Electrical Code, Part I) that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical. CLASS 1 LASER product This Compact Disc player is classified as a CLASS 1 LASER product. Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Complies with 21CFR 1040.10 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007. DANGER : VISIBLE AND INVISIBLE LASER RADIATION ● ● WHEN OPEN. AVOID DIRECT EXPOSURE TO BEAM. (FDA 21 CFR) CAUTION : CLASS 3B VISIBLE AND INVISIBLE LASER ● ● RADIATION WHEN OPEN. AVOID EXPOSURE TO THE BEAM. (IEC 60825-1) THIS PRODUCT UTILIZES A LASER. USE ● ● OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVER AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL. CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT PRODUCTO LÁSER CLASE 1 NOTES ✎ ✎ If the Region number of a Blu-ray ■ ■ Disc/DVDs does not correspond to the Region number of this player, the player cannot play the disc. Precautions Important Safety Instructions Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference. Read these instructions. 111 Keep these instructions. 222 Heed all warnings. 333 Follow all instructions. 444 Do not use this apparatus near water. 555 Clean only with a dry cloth. 666 Do not block any ventilation openings. 777 Install in accordance with the manufacturer's instructions. Do not install near any heat sources such 888 as radiators, heat registers, stoves, or other apparatus (including AV receivers) that produce heat. Do not defeat the safety purpose of 999 the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being 1111 walked on or pinched particularly at plugs, convenience receptacles, and the point where it exits the apparatus. Only use attachments/accessories 1111 specified by the manufacturer. Use only with the 1111 cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Unplug this apparatus during lightning 1111 storms or when unused for long periods of time. Refer all servicing to qualified service 1111 personnel. Servicing is required when the apparatus has been damaged in any way, such as when the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
4 Safety Information Warning. ............................................... 2 Precautions........................................... 3 Getting Started Before using the User Manual............... 4 Logos of Discs the player can play. ......... 5 Accessories........................................... 6 Front Panel........................................... 7 Rear Panel............................................ 7 Remote Control.................................... 7 Connections Connecting to a TV............................... 8 Connecting to an Audio System............ 8 Connecting to a Network Router........... 9 Settings The Setup Procedure........................... 10 Wired Network................................... 10 Wireless Network................................ 10 Menu Navigation................................ 11 Accessing the Settings Menu. .............. 11 Picture Settings................................... 11 Sound Settings. ................................... 12 Network Settings................................ 14 System Settings. .................................. 17 Language Settings.............................. 17 Security Settings................................. 17 General Settings................................. 18 Support Settings................................. 18 Media Play Playing a Commercially Recorded Disc .................................................. 19 Playing Files on a USB Device. .............. 19 Playing a Disc with User Recorded Content.............................................. 20 Using DLNA........................................ 20 Controlling Video Playback.................. 21 Controlling Music Playback. ................. 21 Playing Photo Contents....................... 23 Using Netflix....................................... 23 Using Pandora.................................... 24 Using YouTube.................................... 24 Appendix Troubleshooting. ................................. 26 Specifications. ..................................... 27 Getting Started Before using the User Manual Disc Types and Contents your player can play Media Disc Type Details VIDEO Blu-ray Disc BD-ROM or BD-RE/-R recorded in the BD-RE format. DVD-VIDEO DVD-RW DVD-R DVD+RW DVD+R DVD-VIDEO, recorded DVD+RW/DVD-RW(V)/DVD- R/+R that have been recorded and finalized, or a USB storage media containing MKV or MP4 contents. MUSIC CD-RW/-R, DVD-RW/-R, BD-RE/-R Music recorded on CD-RW/-R, DVD-RW/-R, BD- RE/-R or a USB storage media containing MP3 or WMA contents. PHOTO CD-RW/-R, DVD-RW/-R, BD-RE/-R Photos recorded on CD-RW/-R, DVD-RW/-R, BD- RE/-R or a USB storage media containing JPEG contents. NOTES ✎ ✎ The player may not play certain CD-RW/-R and DVD-R because of the disc type or ■ ■ recording conditions. If a DVD-RW/-R has not been recorded properly in DVD video format, it will not be playable. ■ ■ Your player will not play content that has been recorded on a DVD-R at a bit-rate ■ ■ that exceeds 10 Mbps. Your player will not play content that has been recorded on a BD-R or USB device ■ ■ at a bitrate that exceeds 25 Mbps. Playback may not work for some types of discs, or when you use specific functions, ■ ■ such as angle change and aspect ratio adjustment. Information about the discs is written in detail on the disc box. Please refer to this if necessary. When you play a BD-J title, loading may take longer than a normal title or some ■ ■ functions may perform slowly. Disc types your player cannot play HD DVD ● ● DVD-ROM/PD/ ● ● MV, etc DVD-RAM ● ● Super Audio CD ● ● (except CD layer) DVD-RW (VR mode) ● ● CVD/CD-ROM/CDV/ ● ● CD-G /CD-I/LD (CD-Gsplayaudio only,notgraphics.) 3.9 GB DVD-R ● ● for Authoring. Contents
5 Region Code Both players and discs are coded by region. These regional codes must match for a disc to play. If the codes do not match, the disc will not play. The Region Code for this player is displayed on the rear panel of the player. Disc Type Region Code Area Blu-ray Disc a North America, Central America, South America, Korea, Japan, Taiwan, Hong Kong and South East Asia. b Europe, Greenland, French territories, Middle East, Africa, Australia and New Zealand. c India, China, Russia, Central and South Asia. DVD- VIDEO 1 The U.S., U.S. territories and Canada 2 Europe, Japan, the Middle East, Egypt, South Africa, Greenland 3 Taiwan, Korea, the Philippines, Indonesia, Hong Kong 4 Mexico, South America, Central America, Australia, New Zealand, Pacific Islands, Caribbean 5 Russia, Eastern Europe, India, most of Africa, North Korea, Mongolia 6 China Logos of Discs the player can play Blu-ray Disc BD-LIVE NTSC broadcast system in U.S.A, Canada, Korea, Japan Supported File Formats Notes on the USB connection Your player supports USB storage media, ● ● MP3 players, digital cameras, and USB card readers. The player does not support folder or file ● ● names longer than 128 characters. Some USB/External HDD/digital camera ● ● devices may not be compatible with the player. Your player supports the FAT16, FAT32, ● ● and NTFS file systems. Connect USB devices directly to the player’s ● ● USB port. Connecting through a USB cable may cause compatibility problems. Inserting more than one memory device ● ● into a multi-card reader may cause the reader to operate improperly. The player does not support the PTP ● ● protocol. Do not disconnect a USB device while it ● ● is transferring, playing, or recording files. The bigger the image resolution, the ● ● longer the image takes to display. This player cannot play MP3 files with DRM (Digital Rights Management) downloaded ● ● from commercial sites. Your player only supports video with a frame rate under 30fps (frames per second). ● ● Your player only supports USB Mass Storage Class (MSC) devices such as thumb drives ● ● and USB HDD. (HUB is not supported.) Certain USB HDD Devices, multi-card readers and thumb drives may not be compatible ● ● with this player. If some USB devices require excessive power, they may be limited by the circuit safety ● ● device. If playback from a USB HDD is unstable, provide additional power by plugging the HDD ● ● into a wall socket. If the problem continues, contact the USB HDD manufacturer. SAMSUNG is not responsible for any data file damage or data loss. ● ● Your player does not support NTFS compressed files, sparse files, or encrypted files. ● ● You can repair or format a USB device on your Desktop PC. (MS-Windows OS only) ● ● Supported Video File Formats File Extension Container Video Codec Audio Codec Resolution *.avi AVI MP4v3 MP3 Dolby Digital DTS WMA PCM 1920x1080 H.264 BP/MP/HP 1920x1080 *.mkv MKV VC-1 AP MP3 Dolby Digital DTS 1920x1080 H.264 BP/MP/HP 1920x1080 *.wmv WMV (wmv9) VC-1 AP WMA 1920x1080 VC-1 SM 1920x1080 *.mp4 MP4 MP4 (mp4v) AAC 1920x1080 H.264 BP/MP/HP 1920x1080 *.mpg *.mpeg MPEG MPEG1 MP1, 2 Dolby Digital DTS 1920x1080 MPEG2 1920x1080 H.264 BP/MP/HP 1920x1080
6 Limitations • • Even when a file is encoded by a supported codec listed above, the file might not be - - played if its content has a problem. Normal playback is not guaranteed if the file’s container information is wrong or the - - file itself is corrupted. Files having a higher Bit rate/frame rate than standard may stutter during sound/video - - playback. The Seek (skip) function is not available if the file’s index table is damaged. - - Video decoder • • Supports up to H.264 Level 4.1 and AVCHD - - Does not support H.264 FMO/ASO/RS and VC1 SP/MP/AP L4 - - MPEG4 SP, ASP : - - Below 1280 x 720 : 60 frames max Above 1280 x 720 : 30 frames max Does not support GMC 2 or higher - - Audio decoder • • Supports WMA 7, 8, 9 and STD - - Does not support WMA sampling rate of 22050Hz mono. - - AAC: Max sampling rate: 96Khz (8, 11, 12, 16, 22,24, 32,44.1, 48, 64, 88.2, 96) - - Max bitrate: 320kbps Supported Music File Formats File Extension Container Audio Codec Support Range *.mp3 MP3 MP3 - *.wma WMA WMA * Sampling rates (in kHz) - 8, 11, 16, 22, 32, 44.1, 48 * Bit rates - All bit-rates from 5kbps to 355kbps Supported Picture File Formats File Extension Type Resolution *.jpg *.jpeg *.jpe JPEG 15360x8640 *.png PNG 15360x8640 AVCHD (Advanced Video Codec High Definition) This player can play back AVCHD format discs. These discs are normally recorded and ● ● used in camcorders. The AVCHD format is a high definition digital video camera format. ● ● The MPEG-4 AVC/H.264 format compresses images with greater efficiency than the ● ● conventional image compressing format. Some AVCHD discs use the "x.v.Color" format. This player can play back AVCHD discs ● ● that use the "x.v.Color" format. "x.v.Color" is a trademark of Sony Corporation. ● ● "AVCHD" and the AVCHD logo are trademarks of Matsushita Electronic Industrial Co., ● ● Ltd. and Sony Corporation. NOTES ✎ ✎ Some AVCHD format discs may not play, depending on the recording condition. ■ ■ AVCHD format discs need to be finalized. "x.v.Color" offers a wider color range than normal DVD camcorder discs ■ ■ . Accessories The following accessories are included with your Blu-ray player: Batteries for Remote Control (AAA Size) (4301-000115) User Manual (AK68-02527A) Remote Control (AK59-00149A)
7 Front Panel DISC TRAY POWER BUTTON OPEN/CLOSE BUTTON USB HOST REMOTE CONTROL SENSOR NOTES ✎ ✎ You can perform software upgrades using the USB Host jack with a USB flash ■ ■ memory stick only. Please open and pull out the USB cover before inserting USB device. ■ ■ Rear Panel HDMI OUT LAN DIGITAL AUDIO OUT Remote Control Tour of the Remote Control SCREEN VIEW A-B FULL BONUS REPEAT REPEAT Turn the player on and off. Allows you to play selected portions of a disc repeatedly. Press the number buttons to operate options. Press to open and close the disc tray. Use to enter the disc menu. Press to skip backwards or forwards. Press to stop a disc. Press to use the bonusview function. Return to the previous menu. These buttons are used both for menus on the player and also several Blu-ray Disc functions. Use to select menu items and change menu values. Press to use the Tools menu. Use to access various audio functions on a disc (Blu-ray Disc/DVD). Press to play a disc. Press to pause a disc. Turn the TV on and off. (This button is only available for Samsung TVs,) Press to switch the Blu-ray Disc/DVD’s subtitle language. Use to enter the popup menu/title menu. Press to search a disc backwards or forwards. Press to move to the Home menu. Press to see the full screen on a TV. During Blu-ray Disc/DVD playback, the Full Screen button does not operate. Press to exit the menu. Use to display the playback information when playing a Blu-ray Disc/DVDs. Allows you to repeat a title, chapter, track, or disc. TV volume adjustment. (This button is only available for Samsung TVs,) After setup, allows you to set the input source on your TV. (This button is only available for Samsung TVs,) Installing batteries Check if the remote sensor is blocked by ● ● obstacles. Check if there is any fluorescent lighting ● ● nearby. CAUTION ! ! Dispose of batteries according to local ■ ■ environmental regulations. Do not put them in the household trash. Do not dispose of batteries in a fire. ■ ■ Do not short circuit, disassemble or ■ ■ overheat the batteries. Danger of explosion if batteries are ■ ■ incorrectly replaced. Replace only with the same or equivalent type. NOTES ✎ ✎ If the remote does not operate properly: ■ ■ Check the polarity (+/–) of the batteries. ● ● Check if the batteries are drained. ● ●
8 Connections Connecting to a TV Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN jack on your TV. Do not connect the power cord to the wall outlet until you have made all - - the other connections. When you change the connections, turn off all devices before you start. - - Audio Video NOTES ✎ ✎ If you use an HDMI-to-DVI cable to connect to your display device, you must also ■ ■ connect the Digital Audio Out on the player to an audio system to hear audio. AnHDMIcableoutputsdigitalvideoandaudio,soyoudon'tneedtoconnectanaudiocable. ■ ■ Depending on your TV, certain HDMI output resolutions may not work. Please refer ■ ■ to the user manual of your TV. When you connect the player to your TV using an HDMI cable or to a new TV, and ■ ■ then turn it on for the first time, the player automatically sets the HDMI output resolution to the highest supported by the TV. A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Color to ■ ■ Off in the menu. To view video in the HDMI 720p, 1080i, or 1080p output mode, you must use a ■ ■ high speed HDMI cable. HDMI outputs only a pure digital signal to the TV. ■ ■ If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on the screen. Connecting to an Audio System You can connect the Blu-ray player to an audio system using one of the methods illustrated below. Do not connect the power cord to the wall outlet until you have made all - - the other connections. When you change the connections, turn off all devices before you start. - - Method 1 Connecting to an HDMI compatible AV receiver Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back ● ● of the product to the HDMI IN jack on your receiver. Best quality (Recommended) ● ● Method 2 Connecting to an AV receiver with a Digital Coaxial Cable Using a digital Coaxial cable (not supplied), connect the Coaxial Digital ● ● Audio Out jack on the product to the Digital Coaxial In jack of the receiver. Good quality ● ● You will hear sound only through the front two speakers with Digital Output ● ● set to PCM. Audio Audio Method 2 Method 1
9 Connecting to a Network Router You can connect your player to your network router using one of the methods illustrated below. To use DLNA network functionality, you must connect your PC to your network as shown in the illustrations. The connection can be wired or wireless. Wired Network Broadband service Broadband service Broadband modem (with integrated router) Broadband modem Router Or NOTES ✎ ✎ Internet access to Samsung's software update server may not be allowed, ■ ■ depending on the router you use or your ISP's policy. For more information, contact your ISP (Internet Service Provider). DSL users, please use a router to make a network connection. ■ ■ Wireless Network Wireless Router Broadband service NOTES ✎ ✎ If your wireless router supports DHCP, this player can use a DHCP or static IP ■ ■ address to connect to the wireless network. Set your wireless router to Infrastructure mode. Ad-hoc mode is not supported. ■ ■ The player supports only the following wireless security key protocols: ■ ■ - WEP (OPEN/SHARED), WPA-PSK (TKIP/AES), WPA2-PSK (TKIP/AES) Select a channel on the wireless router that is not currently being used. If the ■ ■ channel set for the wireless router is currently being used by another device nearby, it will result in interference and communication failure. In compliance with the newest Wi-Fi certification specifications, Samsung ■ ■ Blu-ray players do not support WEP, TKIP, or TKIP-AES (WPS2 Mixed) security encryption in networks running in the 802.11n mode. Wireless LAN, by its nature, may cause interference, depending on the ■ ■ operating conditions (router performance, distance, obstacles, interference by other radio devices, etc).
10 Settings The Setup Procedure The Home screen will not appear if ~ ~ you do not configure the Setup. The OSD (On Screen Display) may ~ ~ change in this player after you upgrade the software version. The access steps may differ ~ ~ depending on the menu you selected. After the Setup process is complete, ~ ~ you can then operate the panel buttons and remote control. After you have connected the player to your TV, turn on the TV and player. When you turn on the player the first time, the player's Setup screen appears on the TV. The Setup procedure lets you set the On Screen Display (OSD) and menu languages, the aspect ratio (screen size), the network type, and connect the player to your network. To run the Setup procedure, follow these steps: Plug in the Blu-ray player, turn on 111 your TV, and then turn on the Blu- ray player by pressing the POWER button on the remote. The Setup Language screen appears. > Move " Select Setup I On-Screen Language Select a language for the on-screen displays. Български Hrvatski Dansk Nederlands English Select the desired language, 222 and then press the v button. The Start screen appears. a Previous " Select Setup TV Aspect and Network will be set. Each setting may be changed later under "Settings" Start Press the 333 v button. The TV Aspect screen appears. On the TV Aspect screen, select 444 the desired TV Aspect Ratio, and then press the v button. The Network screen appears. NOTE ✎ ✎ An explanation of each Aspect Ratio ■ ■ appears on the screen. Highlight each choice to see each explanation. If you have an HDTV, we suggest you choose 16:9 original. If you have connected a LAN 555 cable to the Blu-ray player, Initial Setup defaults to Wired Network. Go to the Wired Network section below. If you have not connected a LAN cable, Initial Setup defaults to Wireless Network. Go to the Wireless Network section in the next column NOTE ✎ ✎ If you have no network, select Skip ■ ■ by pressing the BLUE (D) button, and then go to Step 6. The Setup Complete window 666 appears and remains on the screen for a few moments. Then, the Home screen appears. Wired Network The Blu-ray player automatically 111 verifies your wired network. a Previous d Skip m Move " Select Setup I Network Select your network type. Network type Wired Network cable connected. Connect After the player verifies the 222 network, press the v button. Go to Step 6 of The Setup 333 Procedure above. Wireless Network The Blu-ray player automatically 111 searches for and then lists all wireless networks that are within range. a Previous d Skip m Move " Select Setup I Network Select your network type. Network type Wireless Wireless network Add Network You can connect your Blu-ray player to the internet. Please select which wireless network to use. WPS(PBC) Search Select a network, and then press the 222 v button. The keyboard appears. a Previous d Skip m Move " Select Setup I Network linksys3 solugen_edu#2 iptime23 solugen_edu#1 WPS(PBC) Refresh Enter security key. 0 / 64 Caps 1 2 3 4 5 6 7 8 9 0 Clear q w e r t y u i o p ^ * 123#& a s d f g h j k l ~ @ ! Done z x c v b n m , . ? - ▲ Cancel ENG .com ◀ ▶ ▼ " Select ' Return Security Key If your network has a password, use 333 the keyboard to enter it. Press the number buttons on your remote to enter numbers. Use the keyboard to enter letters. When finished, use the ▲▼◀▶ buttons to select Done, and then press the v button. If you have no password, go to Step 4. After the player verifies the 444 network, press the v button.
11 Go to Step 6 of The Setup 555 Procedure on the previous page. NOTES ✎ ✎ The Home screen will not appear if ■ ■ you do not configure the player's settings during Setup, except as noted below. If you press the ■ ■ BLUE (D) button during network setup, you can access the Home screen even if the network setup is not completed yet. If you do not complete network set ■ ■ up during the Initial Setup, you can do it later. See page 14. When you return to the Home ■ ■ screen, the full screen mode is cancelled automatically. If you want to display the Setup ■ ■ screen again to make changes, press the ^ button on the front panel of the player for more than 5 seconds with no disc inserted. This resets the player to its default settings. After the Setup process is complete, you ■ ■ can operate the HDMI-CEC function. If you want to use an Anynet+ ■ ■ (HDMI-CEC) function to aid in the initial set up process, please follow the instructions below. 1) Connect the player to an Anynet+(HDMI-CEC) compliant Samsung TV using an HDMI Cable. 2) Set the Anynet+(HDMI-CEC) feature to On in both the TV and the player. 3) Set the TV to the Setup Procedure. If you leave the player in the stop ■ ■ mode for more than 5 minutes without using it, a screen saver will appear on your TV. If the player is left in the screen saver mode for more than 25 minutes, the power will automatically turn off. Menu Navigation SCREEN VIEW A-B FULL BONUS REPEAT REPEAT 1 2 4 3 1 HOME Button : Press to move to the Home menu. 2 RETURN Button : Return to the previous menu. 3 v (Enter) / DIRECTION Button : Move the cursor or select an item. Activate the currently selected item. Confirm a setting. 4 EXIT Button : Press to exit the current menu. Home Menu ● ● App 1 App 2 App 3 App 4 App 5 More Change Device Settings Play Disc Photos Videos Music No Disc 2 3 6 5 7 1 4 8 1 Access and play Videos. 2 Access and play Music. 3 Access and change Settings. 4 Change the Source Device. 5 Access and view Photos. 6 Play a DISC. 7 Access and use applications. 8 Access More applications. NOTE ✎ ✎ The Videos, Photos, and Music ■ ■ options require that you have an appropriate disc in the player or a USB flash device attached to the player. Accessing the Settings Menu To access the Settings menu and sub- menus, follow these steps: Press the 111 POWER button. The Home Menu appears. Press the ▲▼◀▶ buttons to 222 select Settings, and then press the v button. Press the ▲▼ buttons to select 333 the desired submenu, and then press the v button. Press the ▲▼ buttons to select 444 the desired item, and then press the v button. Press the 555 EXIT button to exit the menu. NOTES ✎ ✎ The access steps may differ depending ■ ■ on the menu you selected. The OSD (On Screen Display) may change in this player after you upgrade the software version. Picture Settings You can configure various display options such as the TV Aspect Ratio, Resolution, etc. TV Aspect Ratio Depending on the type of television you have, you may want to adjust the screen size setting.
12 NOTES ✎ ✎ Depending on the disc type, some ■ ■ aspect ratios may not be available. If you select an aspect ratio and ■ ■ option which is different than the aspect ratio of your TV screen, the picture might appear to be distorted. BD Wise (Samsung TVs only) BD Wise is Samsung’s latest inter- connectivity feature. When you connect a Samsung player and a Samsung TV with BD Wise to each other via HDMI, and BD Wise is on in both the player and TV, the player outputs video at the video resolution and frame rate of the Blu- ray Disc/DVD. NOTES ✎ ✎ When BD Wise is on, the Resolution ■ ■ setting automatically defaults to BD Wise and BD Wise appears in the Resolution menu. If the player is connected to a device ■ ■ that does not support BD Wise, you cannot use the BD Wise function. For the proper operation of BD ■ ■ Wise, set the BD Wise menu of both the player and the TV to On. Resolution Lets you set the output resolution of the HDMI video signal to Auto, 1080p, 1080i, 720p, or 480p. The number indicates the number of lines of video per frame. The i and p indicate interlaced and progressive scan, respectively. The more lines, the higher the quality. Resolution according to the output mode Blu-ray Disc/E-contents/Digital ● ● Contents playback Output Setup HDMI / connected HDMI Mode Blu-ray Disc E-contents/ Digital contents BD Wise Resolution of Blu-ray Disc 1080p Auto Max. Resolution of TV input Max. Resolution of TV input 1080p@60F (Movie Frame : Off) 1080p@60F 1080p@60F Movie Frame : Auto (24Fs) 1080p@24F 1080p@24F 1080i 1080i 1080i 720p 720p 720p 480p 480p 480p DVD playback ● ● Output Setup HDMI / connected HDMI Mode BD Wise 480i Auto Max. Resolution of TV input 1080p 1080p 1080i 1080i 720p 720p 480p 480p NOTES ✎ ✎ If the TV you connected to the player ■ ■ does not support Movie Frame or the resolution you selected, the message "If no pictures are shown after selecting ‘Yes’, please wait for 15 seconds to return to the previous resolution." appears. If you select Yes, the TV’s screen will go blank for 15 seconds, and then the resolution will revert to the previous resolution automatically. If the screen stays blank after you have ■ ■ changed the resolution, remove all discs, and then press and hold the ^ button on the front of the player for more than 5 seconds. All settings are restored to the factory default. Access the Resolution function and reset the output resolution to a resolution that is compatible with your TV. When the factory default settings ■ ■ are restored, all stored user BD data is deleted. The Blu-ray Disc must have the 24 ■ ■ frame feature for the player to use the Movie Frame (24Fs) mode. Movie Frame (24Fs) Setting the Movie Frame (24Fs) feature to Auto allows you to adjust the player’s HDMI output to 24 frames per second for improved picture quality. You can enjoy the Movie Frame (24Fs) feature only on a TV supporting this frame rate. You can select Movie Frame only when the player is in the HDMI 1080p output resolution mode. HDMI Color Format Lets you set the color space format for HDMI output to match the capabilities of the connected device (TV, monitor, etc). HDMI Deep Color Lets you output video from the HDMI OUT jack with Deep Color. Deep Color provides more accurate color reproduction with greater color depth. Progressive Mode Lets you improve picture quality when viewing DVDs. Sound Settings Digital Output Lets you select the digital audio output format that is suitable for your TV or AV Receiver. For more details, please refer to the Digital Output Selection table on the next page.
13 Blu-ray Discs may include three audio streams : Main Feature Audio : The audio - - soundtrack of the main feature. BONUSVIEW audio : An additional - - soundtrack such as the director or actor’s commentary. Navigation Sound Effects : When you - - choose a menu navigation selection, a Navigation Sound Effect may sound. Navigation Sound Effects are different on each Blu-ray Disc. NOTES ✎ ✎ Be sure to select the correct Digital ■ ■ Output or you will hear no sound or just loud noise. If the HDMI device (AV receiver, TV) ■ ■ is not compatible with compressed formats (Dolby Digital, DTS), the audio signal outputs as PCM. Regular DVDs do not have ■ ■ BONUSVIEW audio and Navigation Sound Effects. Some Blu-ray Discs do not have ■ ■ BONUSVIEW audio and Navigation Sound Effects. If you play MPEG audio soundtracks, ■ ■ the audio signal outputs as PCM regardless of your Digital Output selections (PCM or Bitstream). If your TV is not compatible with ■ ■ compressed multi-channel formats (Dolby Digital, DTS), the player may output PCM 2ch downmixed audio even though you selected Bitstream (either Re-encoded or Unprocessed) in the setup menu. If your TV is not compatible with ■ ■ PCM sampling rates over 48kHz, the product will output at 48kHz downsampled PCM audio even though you set PCM Downsampling to Off. Digital Output Selection Setup PCM Bitstream (Unprocessed) Bitstream (Re-encoded DTS) Bitstream (Re-encoded Dolby D) Connection HDMI Receiver Coaxial HDMI Receiver Coaxial HDMI Receiver or Coaxial HDMI supported AV receiver or Coaxial Audio Stream on Blu-ray Disc PCM Up to 7.1ch PCM 2ch PCM PCM 2ch Re-encoded DTS Re-encoded Dolby Digital * Dolby Digital PCM 2ch PCM 2ch Dolby Digital Dolby Digital Re-encoded DTS Re-encoded Dolby Digital * Dolby Digital Plus PCM 2ch PCM 2ch Dolby Digital Plus Dolby Digital Re-encoded DTS Re-encoded Dolby Digital * Dolby TrueHD PCM 2ch PCM 2ch Dolby TrueHD Dolby Digital Re-encoded DTS Re-encoded Dolby Digital * DTS PCM 2ch PCM 2ch DTS DTS Re-encoded DTS Re-encoded Dolby Digital * DTS-HDHigh Resolution Audio PCM 2ch PCM 2ch DTS-HDHigh Resolution Audio DTS Re-encoded DTS Re-encoded Dolby Digital * DTS-HD Master Audio PCM 2ch PCM 2ch DTS-HD Master Audio DTS Re-encoded DTS Re-encoded Dolby Digital * Audio Stream on DVD PCM PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch Dolby Digital PCM 2ch PCM 2ch Dolby Digital Dolby Digital Dolby Digital Dolby Digital DTS PCM 2ch PCM 2ch DTS DTS DTS DTS Definition for Blu-ray Disc Any Decodes main feature audio and BONUSVIEW audio stream together into PCM audio and adds Navigation Sound Effects. Outputs only main feature audio stream so that your AV receiver can decode the audio bitstream. You will not hear BONUSVIEW audio and Navigation Sound Effects. Decodes main feature audio and BONUSVIEW audio stream together into PCM audio and adds Navigation Sound Effects, then re- encodes the PCM audio into DTS bitstream Decodes main feature audio and BONUSVIEW audio stream together into PCM audio and adds Navigation Sound Effects, then re- encodes the PCM audio into Dolby Digital bitstream If Source Stream is 2ch, "Re-encoded Dolby D" Settings are not applied. * * PCM Downsampling Lets you choose to have 96KHz PCM signals downsampled to 48KHz before they are outputted to an amplifier. Choose On if your amplifier or receiver is not compatible with a 96KHz signal. Dynamic Range Control Lets you apply dynamic range control to Dolby Digital, Dolby Digital Plus, and Dolby TrueHD audio. Auto ● ● : Automatically controls the dynamic range of Dolby TrueHD audio, based on information in the Dolby TrueHD soundtrack. Also turns dynamic range control on for Dolby Digital and Dolby Digital Plus. Off ● ● : Leaves the dynamic range uncompressed, letting you hear the original sound. On ● ● : Turns dynamic range control on for all three Dolby formats. Quieter sounds are made louder and the volume of loud sounds is reduced. Downmixing Mode Lets you select the multi-channel downmix method that is compatible with your stereo system. You can choose to have the player downmix to normal stereo or to surround compatible stereo.
14 Network Settings When you connect this player to a network, you can use network based applications and functions such as BD- LIVE (see page 16), Netflix, Pandora, and YouTube (see pages 23~25). You can also use the network connection to upgrade the player's software (see page 18). Instructions for configuring the network connection start below. Configuring Your Network Connection Before you begin, contact your ISP to find out if your IP address is static or dynamic. If it is dynamic, and you have a wired or wireless network, we recommend using the Automatic configuration procedures described below. If you are connecting to a wired network, connect the player to your router using a LAN cable before you start the configuration procedure. If you are connecting to a wireless network, disconnect any wired network connections before you begin. To begin configuring your network connection, follow the steps beginning below. Wired Network Wired - Automatic Ğ Ğ In the Home screen, select 111 Settings, and then press the v button. Use the number keypad on your remote control to enter the numbers for the parameter. Use the ◀▶ buttons on the remote control to move from entry field to entry field within a parameter. When done with one parameter, press the v button. Press the ▲ or ▼ button to move to 666 another parameter, and then enter the numbers for that parameter following the instructions in Step 5. Repeat Steps 5 and 6 until you 777 have filled in all parameters. NOTE ✎ ✎ You can get the Network parameters ■ ■ from your Internet provider. When finished entering all the 888 parameters, press the RETURN or EXIT button. The player verifies the network connection, and then connects to the network. Wireless Network You can setup a wireless network connection in four ways: Wireless Automatic - - Wireless Manual - - WPS(PBC) - - WPS(PIN) - - When you configure the wireless network connection, any wireless network devices currently connected through the player or, if applicable, the player's current wired connection, will be disconnected. Wireless - Automatic Ğ Ğ In the Home screen, select 111 Settings, and then press the v button. Select 222 Network, and then press the v button. Select 333 Network Settings, and then press the v button. Select 444 Wireless in the Network Settings screen, and then press the v button. The player searches for and then displays a list of the available networks. m Move " Select ' Return Network Settings Select your network type. Network type Wireless Wireless network Add Network You can connect your Blu-ray player to the internet. Please select which wireless network to use. WPS(PBC) Search Select the desired network, and 555 then press the v button. On the Security screen, enter your 666 network's Security Code or Pass Phrase. Enter numbers directly using the number buttons on your remote control. Enter letters by selecting a letter with an arrow button, and then pressing v button. When 777 finished, select Done and then press the v button. The player verifies the network connection and then connects to the network. Select 222 Network, and then press the v button. Select 333 Network Settings, and then press the v button. Select 444 Wired in the Network Settings screen, and then press the v button. Select the 555 Connect button, and then press the v button. The product detects the wired connection, verifies the network connection, and then connects to the network. Wired - Manual Ğ Ğ If you have a static IP address or the Automatic procedure does not work, you'll need to set the Network Settings values manually. Follow Steps 1 and 2 in Wired - Automatic, and then follow these steps: Select 111 Network Status. The player searches for a network, and then displays the connection failed message. On the bottom of the screen, 222 select IP Settings, and then press the v button. The IP Settings screen appears. Select the IP Setting field, and 333 then press the v button. Select 444 Enter manually in the IP Setting field, and then press the v button. Select a parameter to enter ( 555 IP Address, for example), and then press the v button.
15 When verification is complete, 888 select OK, and then press the v button. NOTE ✎ ✎ You should be able to find the ■ ■ Security Code or Pass Phrase on one of the set up screens you used to set up your router or modem. Wireless - Manual Ğ Ğ If you have a static IP address or the Automatic procedure does not work, you'll need to set the Network Settings values manually. Follow the directions in Wireless - 111 Automatic through Step 5. The player tries to connect to the 222 network, and then displays the connection failed message. On the bottom of the screen, 333 select IP Settings, and then press the v button. The IP Settings screen appears. Select the IP Setting field, and 444 then press the v button. Select 555 Enter manually in the IP Setting field, and then press the v button. Select a 666 parameter to enter (IP Address, for example), and then press v button. Use the number keypad on your remote control to enter the numbers for the parameter. Use the ◀▶ buttons on the remote control to move from entry field to entry field within a parameter. The player searches for and then displays a list of the available networks. Select the desired network, and 555 then press the ▶ button. Select the 666 WPS(PIN), and then press the v button. The PIN pop-up appears. Enter the PIN into the WPS PIN entry 777 field in the router's Set Up screen and then save the the screen. NOTES ✎ ✎ Contact the manufacturer of the ■ ■ router for instructions explaining how to access the router's Set Up screens or refer to the router's user's manual. For WPS connection, set your ■ ■ wireless router’s security encryption to AES. WPS does not support WEP security encryption. Network Test Use this menu item to check whether your network connection is working or not. Network Status Use to check whether a connection to a network and the Internet has been established. When done with one parameter, press the v button. Press the ▲ or ▼ button to move to 777 another parameter, and then enter the numbers for that parameter following the instructions in Step 6. Repeat Steps 6 and 7 until you 888 have filled in all parameters. NOTE ✎ ✎ You can get the Network parameters ■ ■ from your Internet provider. When finished, press the 999 RETURN or EXIT button. The Security Screen appears. On the Security screen, enter your 1111 network's Security Code or Pass Phrase. Enter numbers directly using the number buttons on your remote control. Enter letters by selecting a letter with the ▲▼◀▶ buttons, and then pressing the v button. When finished, select 1111 Done at the right of the screen, and then press the v button. The player verifies the network connection and then connects to the network. After the player verifies the 1111 network, select OK, and then press the v button. WPS(PBC) Ğ Ğ In the Home screen, select 111 Settings, and then press the v button. Select 222 Network, and then press the v button. Select 333 Network Settings, and then press the v button. Select 444 Wireless in the Network Settings screen, and then press the v button. Press the ▲▼ button on your 555 remote, and then press the ◀▶ button to select the WPS(PBC). Press the 666 v button on your remote. The "Press the PBC button" message appears. Press the WPS(PBC) button on your 777 router within two minutes. Your player automatically acquires all the network settings values it needs and connects to your network. The Network Status screen appears. The player connects to the network after the network connection is verified. WPS(PIN) Ğ Ğ Before you begin, open the router's setup menu on your PC and access the screen with the WPS PIN entry field. In the Home screen, select 111 Settings, and then press the v button. Select 222 Network, and then press the v button. Select 333 Network Settings, and then press the v button. Select 444 Wireless in the Network Settings screen, and then press the v button.
16 Wi-Fi Direct The Wi-Fi Direct function allows you to connect Wi-Fi Direct devices to the player and each other using a peer-to- peer network, without a wireless router. NOTES ✎ ✎ Some Wi-Fi Direct devices may ■ ■ not support the DLNA function if connected via Wi-Fi Direct. If this is the case, we recommend that you change the network connection method you used to connect the devices. Bluetooth transmissions can ■ ■ interfere with the Wi-Fi Direct signal. Before you use the Wi- Fi Direct function, we strongly recommend that you turn off the Bluetooth function of any active mobile device. Turn on the Wi-Fi direct device and 111 activate its Wi-Fi Direct function. In the Home screen, select 222 Settings, and then press the v button. Select 333 Network, and then press the v button. Select 444 Wi-Fi Direct, and then press the v button. The Wi-Fi Direct devices that you can connect to the player appear. You have three ways to complete 555 the Wi-Fi connection: Through the Wi-Fi device. ● ● Through the player using PBC. ● ● Through the player using a PIN. ● ● Each is covered below. Through the Wi-Fi Device On the Wi-Fi device, follow the 111 procedure on the device for connecting to another Wi-Fi Direct device. See the device's user manual for instructions. When you have completed the 222 procedure, you should see a pop- up on your TV screen saying that a device that supports Wi-Fi Direct has requested to connect. Select OK, and then press the v button to accept. The Connecting pop-up appears, 333 followed by the Connected pop- up. When it closes, you should see the device listed on the Wi-Fi Direct screen as connected. Through the Player Using PBC Select the Wi-Fi Direct device you 111 want to connect to this player, and then press the v button. The PBC/PIN pop up appears. Select 222 PBC, and then press the v button. The PBC pop-up appears. Press the PBC button on the Wi-Fi 333 Direct device within 2 minutes. The Connecting pop-up appears, 444 followed by the Connected pop- up. When it closes, you should see the device listed on the Wi-Fi Direct screen as connected. Through the Player Using a PIN Select the Wi-Fi Direct device you 111 want to connect to this player, and then press the v button. The PBC/PIN pop up appears. Select 222 PIN, and then press the v button. The PIN pop-up appears. Note the PIN code in the pop- 333 up, and then enter it into the appropriate field in the Wi-Fi Direct device you want to connect. The Connecting pop-up appears, 444 followed by the Connected pop- up. When it closes, you should see the device listed on the Wi-Fi Direct screen as connected. NOTES ✎ ✎ The current wired or wireless ■ ■ network connection will be disconnected when you use the Wi-Fi Direct function. Text files, such as ■ ■ files with a .TXT or .DOC extension, do not display when you are using the Wi-Fi Direct function. Device Name The Device Name function allows you to change the player's name by selecting from a device name list. BD-Live Internet Connection Set to allow or prohibit an Internet connection when you use the BD- LIVE service. Allow (All) ● ● : The Internet connection is allowed for all BD-LIVE contents. Allow (Valid Only) ● ● : The Internet connection is allowed only for BD- LIVE contents containing a valid certificate. Prohibit ● ● : No Internet connection is allowed for any BD-LIVE content. NOTES ✎ ✎ What is a valid certificate? ■ ■ When the player uses BD-LIVE to send the disc data and a request to the server to certify the disc, the server uses the transmitted data to check if the disc is valid and sends the certificate back to the player. The Internet connection may be ■ ■ restricted while you are using BD- LIVE contents. Using BD-LIVE™ Once the player is connected to the network, you can enjoy various movie-related service content using a BD-LIVE compliant disc. Attach a USB memory stick to 111 the USB jack on the front of the player, and then check its remaining memory. The memory device must have at least 1GB of free space to accommodate the BD-LIVE services. Insert a Blu-ray Disc that supports 222 BD-LIVE. Select an item from various BD- 333 LIVE service contents provided by the disc manufacturer. NOTE ✎ ✎ The way you use BD-LIVE and ■ ■ the provided contents may differ, depending on the disc manufacturer.
17 The DLNA Function DLNA lets you play music, video, and photo files stored in your PC through your Blu-ray player. To use DLNA, you must install DLNA software or already have DLNA software installed on your PC and connect the Blu-ray player to your PC via your network (see pages 14~15). NOTE ✎ ✎ PCs running Windows 7 and ■ ■ Windows 8 have DLNA software (Play To) built in. For instructions explaining how to play content located on your PC, see pages 20~23. System Settings Setup By using the Setup function, you can set the language, Network Settings, etc. For more information about the Setup function, refer to the Setup section of this user manual (See page 10). Quick Start When set to On, Quick Start lets the player start up more quickly by decreasing the boot time. NOTE ✎ ✎ If this function is set to ■ ■ On, Standby power consumption will be increased. Anynet+ (HDMI-CEC) Anynet+ is a convenient function that offers linked operations with other Samsung products that have the Anynet+ feature. To operate this function, connect this player to an Anynet+ Samsung TV with an HDMI cable. With Anynet+ on, you can operate this player using a Samsung TV remote control and start disc playback simply by pressing the PLAY ( ) button on the TV’s remote control. For more information, please see the TV user manual. NOTES ✎ ✎ This function is not available if the ■ ■ HDMI cable does not support CEC. If your Samsung TV has an Anynet+ ■ ■ logo, then it supports the Anynet+ function. Depending on your TV, certain HDMI ■ ■ output resolutions may not work. Please refer to the user manual of your TV. If you have Anynet+ turned on, when ■ ■ you turn off the product or disconnect and then reconnect the power cable, the product turns on automatically to re-establish the Anynet+ connection. After about 15 seconds, it turns off again automatically. Some Samsung TVs, when ■ ■ connected to this product using the Anynet+ function will, when you turn them on, display a warning popup message saying no connection has been found. Never-the-less, the Anynet+ connection is properly established and available to use. BD Data Management Enables you to manage the downloaded contents you accessed through a Blu-ray disc that supports the BD-LIVE service and stored on a flash drive. You can check the device’s information including the storage size, delete the BD data, or change the Flash memory device. NOTES ✎ ✎ In the external memory mode, ■ ■ disc playback may be stopped if you disconnect the USB device in the middle of playback. Your player supports the FAT16, ■ ■ FAT32, and NTFS file systems. We recommend you use USB devices that support the USB 2.0 protocol with 4 MB/sec or faster read/write speed. The Resume Play function may not ■ ■ work after you format the storage device. The total memory available to BD ■ ■ Data Management may differ, depending on the conditions. Language Settings You can select the language you prefer for the On-Screen menu, disc menu, audio, and subtitles. NOTE ✎ ✎ The selected language will only ■ ■ appear if it is supported on the disc. Security Settings When you access this function for the first time, the PIN screen appears. Enter the default PIN - 0000 - using the number buttons. To change the PIN, use the Change PIN function. Each time you access the Security Settings hereafter, you must enter that four digit PIN. If you don’t change the PIN, continue using the default PIN. BD Parental Rating Prevents playback of Blu-ray Discs with specific age ratings unless the 4 digit PIN is entered.
18 DVD Parental Rating This function works in conjunction with DVDs that have been assigned an age rating or numeric rating that indicates the maturity level of the content. These numbers help you control the types of DVDs that your family can watch. Select the rating level you want to set. For example, if you select Level 6, discs rated above 6 - Level 7 and 8 - will not play. A larger number indicates more mature content. When the DVD Parental Rating function is on, you must enter the 4 digit PIN to play discs with restricted rating levels. Change PIN Change the 4-digit password used to access security functions. To change the PIN, follow these steps: Select 111 Change PIN, and then press the v button. The Enter old PIN screen appears. Enter the old PIN. If you never 222 changed the PIN, enter the default PIN: 0000. The Enter new PIN screen appears. Enter the new PIN in the Enter 333 new PIN field. Re-enter the new PIN in the 444 Confirm new PIN field. The "PIN is changed successfully." message appears. Press the 555 v button. If you forget your password Remove any discs. 111 Press and hold the 222 ^ button on the front panel for 5 seconds or more. All settings will revert to their factory settings. NOTE ✎ ✎ When the factory default settings ■ ■ are restored, all the user stored BD data is deleted. General Settings Time Zone Lets you specify the time zone that is applicable to your area. Support Settings Software Upgrade The Software Upgrade menu allows you to upgrade the player’s software for performance improvements or additional services. By Online To upgrade By Online, follow these steps: Remove any discs from the 111 player. In the player’s menu, go to 222 Settings > Support > Software Upgrade. Select 333 By Online, and then press the v button. The Connecting to Server message appears. A popup message will appear if 444 an update is available. If a download is available, select 555 Yes. The download and upgrade process starts. (Important: Never turn the player off or on manually during an upgrade.) When the update is complete, the 666 player will restart automatically. NOTES ✎ ✎ The upgrade is complete when the ■ ■ player turns off, and then turns on again by itself. Never turn the player off or back ■ ■ on manually during the update process. Samsung Electronics takes no ■ ■ legal responsibility for any product malfunction caused by an unstable Internet connection or consumer negligence during a software upgrade. No disc should be in the product ■ ■ when you upgrade the software By Online. By USB To upgrade by USB, follow these steps: Visit www.samsung.com. Select 111 Owners & Support > Manual & Downloads. Then, follow the directions on the screen. Download the latest USB software 222 upgrade zip archive to your computer. Unzip the zip archive to your 333 computer. You should have a single RUF file with the same name as the zip file. Copy the RUF file to a USB flash 444 drive. Make sure there is no disc in the 555 player, and then insert the USB flash drive into the USB port of the player. In the player’s menu, go to 666 Settings > Support > Software Upgrade. Select 777 By USB. NOTES ✎ ✎ No disc should be in the product ■ ■ when you upgrade the software using the USB Host jack. When the software upgrade is ■ ■ done, check the software details in the software Upgrade menu. Do not turn off the player during ■ ■ the software upgrade. It may cause the player to malfunction. Software upgrades using the USB ■ ■ Host jack must be performed with a USB flash memory stick only.
19 Auto Upgrade Notification If you have connected the player to your network, and then set Auto Upgrade Notification on, the player automatically notifies you when a new software version is available for the player. To set Auto Upgrade Notification on, follow these steps: Select 111 Auto Upgrade Notification, and then press the v button. Use the ▲▼ buttons to select 222 On, and then press the v button. If there is a new software version available, the player notifies you with a popup message. To upgrade the firmware, remove 111 any discs from the player. Select 222 Yes in the Pop-up. The player turns off automatically, then restarts, and begins the download. (Never turn the player on or off manually during an upgrade.) The update progress popup 333 appears. When the update is complete, the 444 player will restart automatically. NOTES ✎ ✎ The upgrade is complete when the ■ ■ player turns off, and then turns on again by itself. Never turn the player off or on ■ ■ manually during the update process. Samsung Electronics takes no legal ■ ■ responsibility for player malfunction caused by an unstable Internet connection or consumer negligence during software upgrade. Contact Samsung Provides contact information for assistance with your player. Terms of Service Agreement Lets you view the general disclaimer regarding third party contents and services. Reset Returns all settings to their factory defaults except for the network settings. Media Play Playing a Commercially Recorded Disc Press the 111 8 button to open the disc tray. Place a disc gently into the disc 222 tray with the disc's label facing up. Press the 333 8 button to close the disc tray. Playback starts automatically. Playing Files on a USB Device There are two methods you can use to play or view multimedia files located on a USB device. Method 1 Turn the player on. 111 Connect the USB device to the 222 USB port on the front panel of the player. The New Device Connected pop-up appears. App 1 App 2 App 3 App 4 App 5 More Change Device Settings Play Disc Photos Videos Music No Disc New device connected. Photos Videos Music 123 > Move " Enter ' Return NOTE ✎ ✎ If the pop-up does not appear, go ■ ■ to Method 2. Use the ▲▼ buttons to select 333 Photos, Videos, or Music, and then press the v button. The Photos, Videos & Music screen appears listing the content of the device. Depending on how the contents are arranged, you will see either folders, individual files, or both. NOTE ✎ ✎ Even though the player will display ■ ■ folders for all content types, it will only display files of the Content Type you selected in Step 3. For example, if you selected music, you will only be able to see music files. You can change this selection by returning to the Photos, Videos & Music screen and going to Step 3 in Method 2 below. If necessary, use the ▲▼◀▶ 444 buttons to select a folder, and then press the v button. Select a file to view or play, and 555 then press the v button. Press the 666 RETURN button to exit a folder or the EXIT button to return to the Home screen. Go to pages 21~23 for 777 instructions that explain how to control playback of videos, music, and pictures on a USB device.
20 Method 2 Turn the player on. 111 Connect the USB device to the 222 USB port on the front panel of the player. Select Change Device and then press the ▲▼ button to select USB. Press the v button. App 1 App 2 App 3 App 4 App 5 More Change Device Settings Play Disc Photos Videos Music No Disc Change Device No Disc 123 a Close Use the ▲▼◀▶ buttons to select 333 Photos, Videos, or Music on the Home screen, and then press the v button. The Photos, Videos & Music screen appears listing the content of the device. Depending on how the contents are arranged, you will see either folders, individual files, or both. NOTE ✎ ✎ Even though the player will display ■ ■ folders for all content types, it will only display files of the Content Type you selected in Step 3. For example, if you selected music, you will only be able to see music files. You can change this selection by returning to the Photos, Videos & Music screen and repeating Step 3. If necessary, use the ▲▼◀▶ 444 buttons to select a folder, and then press the v button. Use the ▲▼◀▶ buttons to select 555 a file to view or play, and then press the v button. Press the 666 RETURN button to exit a folder or the EXIT button to return to Home screen. Go to pages 21~23 for 777 instructions that explain how to control playback of videos, music, and pictures on a USB device. NOTE ✎ ✎ If you insert a disc when playing ■ ■ a USB device, the device mode changes to "Disc" automatically. Playing a Disc with User Recorded Content You can play multimedia files you have recorded on Blu-ray, DVD, or CD discs. Place a user recorded disc into 111 the disc tray with the disc’s label facing up, and then close the tray. Use the ◀▶ buttons to select the 222 type of content you want to view or play - Videos, Photos, or Music - and then press the v button. NOTE ✎ ✎ Even though the player will display ■ ■ folders for all content types, it will only display files of the Content Type you selected in Step 2. For example, if you selected music, you will only be able to see music files. You can change this selection by returning to the Home screen and repeating Step 2. A screen appears listing the 333 contents of the disc. Depending on how the contents are arranged, you will see either folders, individual files, or both. If necessary, use the ▲▼◀▶ 444 buttons to select a folder, and then press the v button. Use the ▲▼◀▶ buttons to select 555 a file to view or play, and then press the v button. Press the 666 RETURN button one or more times to exit a current screen, exit a folder, or to return to the Home screen. Press the EXIT button to return directly to the Home Screen. Go to pages 21~23 for 777 instructions that explain how to control playback of videos, music, and pictures on a disc. Using DLNA DLNA Connection PC Blu-ray Disc Player Play back PC's files Connect the Blu-ray Disc Player, 111 your PC, and/or your DLNA compatible device to the same wireless network. Follow the directions in the DLNA 222 software Installation/Instruction manual to set up devices and files for playing or viewing. Select 333 Change Device on the player's Home screen, and then press the v button. In the list of DLNA connected devices that appears, select your PC or other DLNA compatible device, and then press the v button. Use the ◀▶ buttons to select the 444 type of content you want to view or play - Videos, Photos, or Music - and then press the v button. NOTE ✎ ✎ Even though the player will display ■ ■ folders for all content types, it will only display files of the Content Type you selected in Step 4. For example, if you selected music, you will only be able to see music files. You can change this selection by returning to the Home screen and repeating Step 4.
21 A screen appears listing the 555 contents of the PC or DLNA device. Depending on how the contents are arranged, you will see either folders, individual files, or both. If necessary, use the ▲▼◀▶ 666 buttons to select a folder, and then press the v button. Use the ▲▼◀▶ buttons to select 777 a file to view or play, and then press the v button. Press the 888 RETURN button one or more times to exit a current screen, exit a folder, or to return to the Home screen. Press the EXIT button to return directly to the Home Screen. Go to pages 21~23 for 999 instructions that explain how to control playback of videos, music, and pictures on a disc. Controlling Video Playback You can control the playback of video content located on a Blu-ray disc, DVD, CD, USB device, or your computer. Depending on the media, some of the functions described in this manual may not be available. During Blu-ray or DVD disc playback, the Full screen button does not operate. Buttons on the Remote Control used for Video Playback SCREEN VIEW A-B FULL BONUS REPEAT REPEAT 1 2 Playback related buttons The player does not play sound in Search, Slow, or Step mode. To return to normal speed playback, ● ● press the 6 button. 6 button Starts playback. 5 button Stops playback. 7 button Pauses playback. Fast Motion Play During playback, press the 3 or 4 button. Each time you press the 3 or 4 button, the playback speed will change. Slow Motion Play In pause mode, press the 4 button. Each time you press the 4 button, the playback speed will change. Step Motion Play In pause mode, press the 7 button. Each time you press the 7 button, a new frame appears. Skip Motion Play During playback, press the 1 or 2 button. Each time you press the 1 or 2 button, the disc moves to the previous or next chapter or file. Using the disc menu, title menu, popup menu, and title list DISC MENU button During playback, press this button to display the Disc menu. TITLE MENU button During playback, press this button to display the Title menu. POPUP MENU button During playback, press this button to display the Pop-up menu. Controlling Music Playback You can control the playback of music located on a Blu-ray disc, DVD, CD, USB device, or your computer. Buttons on the Remote Control used for Music Playback SCREEN VIEW A-B FULL BONUS REPEAT REPEAT 1 4 6 3 2 5 1 NUMBER buttons (Audio CD (CD- DA) only) : During Playlist playback, press the desired track number. The selected track is played. 2 Skip : During playback, press the 1 or 2 button to move to the previous or next file of the playlist. 3 5 button : Stops a track. 4 Fast Play (Audio CD (CD-DA) only) During playback, press the 3 or 4 button. Each time you press the 3 or 4 button, the playback speed will change. 5 Pause : Pauses a track. 6 6 button : Plays the currently selected track.
22 Repeat an Audio CD (CD-DA)/ MP3 During Playlist playback, press the 111 TOOLS button. " Pause c Select Tools ' Return + 00:08 / 05:57 1/6 TRACK 001 05:57 TRACK 002 04:27 TRACK 003 04:07 TRACK 004 03:41 TRACK 005 03:17 TRACK 006 03:35 Playlist TRACK 001 CD Tools Repeat Mode ? Off \ Rip > Move < Adjust ' Return Press the ◀▶ buttons to select 222 Track, All, Shuffle, or Off. Press the 333 v button. Off Songs are played in the order in which they were recorded. ( ) Track The current song is repeated. ( ) All All songs are repeated. ( ) Shuffle Shuffle plays songs in random order. Playlist To move to the Music List, press 111 the 5 or RETURN button. The Music List screen appears. c Select Tools ( ) Jump Page ' Return 1/2 Page Music TRACK 001 TRACK 001 02:38 TRACK 003 02:38 TRACK 005 02:38 TRACK 007 02:38 TRACK 009 02:38 TRACK 004 02:38 TRACK 002 02:38 TRACK 006 02:38 TRACK 008 02:38 TRACK 010 02:38 CD a Change Device Press the ▲▼◀▶ buttons to 222 move to a desired track, and then press the YELLOW (C) button. A check appears on the track. Repeat this procedure to select additional tracks. To remove a track from the list, 333 move to the track, and then press the YELLOW (C) button again. The check on the track is cancelled. When done, press the 444 v button. The tracks you selected are displayed on the right side of the screen. The player plays the first track. To change the play list, press the 555 5 button or RETURN button to return to the Music List. Repeat Steps 2, 3, and 4. To cancel the play list and return 666 to the Home screen, press the RETURN or EXIT button. NOTES ✎ ✎ You can create a playlist with up to ■ ■ 99 tracks on Audio CDs (CD-DA). If you remove all the tracks from ■ ■ a play list and then press the v button, the player lists and plays all the tracks on the disc. Ripping Lets you copy audio files from an Audio CD (CD-DA) to a USB/HDD device. Open the disc tray. Place the 111 audio (CD-DA) disc on the tray, and close the tray. Insert a USB device into the USB jack on the front of the product. In Stop mode, press the ▲▼◀▶ 222 buttons to move to a desired track, and then press the YELLOW (C) button. A check appears on the track. Repeat this procedure to select additional tracks. To remove a track from the list, 333 move to the track, and then press the YELLOW (C) button again. The check on the track is cancelled. When done, press the 444 TOOLS button, and then select Rip using the ▲▼ buttons, and then press the v button. The Rip pop-up appears. Use the ▲▼ buttons to select the 555 device to store the ripped files to, and then press the v button. NOTE ✎ ✎ Do not disconnect the device while ■ ■ ripping is in progress. If you want to cancel ripping, 666 press the v button, and then select Yes. Select No to continue ripping. When ripping is complete, the 777 "Ripping is completed." message appears. Press the v button to go back to the Playback screen. NOTES ✎ ✎ This function may not be ■ ■ supported by some discs. On the Ripping screen, you can ■ ■ also choose Select All and Deselect All. Use - - Select All to select all tracks. This cancels your individual track selections. Use - - Deselect All to deselect all selected tracks at once.
25 Sign In & Settings lets you access your YouTube account and send videos from your tablet or smart phone to your TV. Playing and Controlling Videos To begin, select either 111 Popular on YouTube, and then press the v button. Use the 222 ◀▶ buttons to select a category you want, and then press the v button. YouTube automatically starts the first video in that category. After the video starts, press the 333 v button. The Control Panel appears. On the Control Panel you can Pause, Rewind, Fast Forward, and perform other operations on the running video by using the ◀▶ buttons on your remote to select the appropriate button on the Control Panel, and then pressing the v button on the remote. Finding and Selecting Other Videos Related Videos With a video running and the 111 Control Panel displayed, press the ▼ button once. The Information screen appears. In the Information screen, press 222 the ▼ button once. The Related Videos category appears displaying individual related videos. Use the ◀▶ buttons to select 333 a video, and then press the v button. The first video stops and the video you selected plays. If you do not find a video you want, 444 press the Return or ▲ button to return to previous screens. Current Play List Videos With a video running and the 111 Control Panel displayed, press the ▼ button once. The Information screen appears. In the Information screen, press 222 the ▼ button once. The Related Videos category appears displaying individual related videos. Press the ▼ button again. 333 The Current Play List appears displaying individual videos in the Current Play List. Use the 444 ◀▶ buttons to select a video, and then press the v button. The first video stops and the video you selected plays. If you do not find a video you 555 want, press the Return or ▲ button to return to previous screens. Using Search On the YouTube Home screen, 111 select Search, and then press the v button. On the Search screen, use the 222 ◀▶ buttons to select a character, and then press the v button. The character you selected appears in the field at the top. Repeat Step 2 to select more 333 letters or numbers. As you add more characters, 444 YouTube will start to display matches in the field on the right. This may take some time. To move to the list of matches, 555 press the ▶ button one or more times. To select a video, use the ▲▼ 666 ◀▶ buttons to highlight it, and then press the v button. YouTube plays the video. NOTES ✎ ✎ Select ■ ■ Clear at the top of the screen to clear all entered characters. Select the Delete button (with an ■ ■ :) at the top of the screen to delete the last character you entered. Sign In & Settings Sign In & Settings lets you access your YouTube account and send videos from your tablet or smart phone to your TV. Using Sign In & Settings To use Sign In & Settings, follow these steps; On the YouTube Home page, 111 select Sign In & Settings, and then press the v button. On the Sign In & Settings page, 222 use the ◀▶buttons to select either Sign In or Pair, and then press the v button. Follow the directions on the 333 screen.
26 PROBLEM SOLUTION If you experience other problems. Go to the table of contents and find the section of the user ~ ~ manual that contains information about the feature you are having the problem with, and then follow the procedure again. If you still cannot resolve the problem, please contact Samsung ~ ~ Customer Support at the phone number listed on the last page of this manual. DLNA function I can see folders shared through DLNA, but I cannot see the files. DLNA only shows Video, Photo, and Music files. Other types of ~ ~ files are not displayed. Video is played intermittently. Check if the network is stable. ~ ~ Checkifthenetworkcableisproperlyconnectedandifthenetworkisoverloaded. ~ ~ The wireless connection between the DLNA compatible device and ~ ~ the player is unstable. Check the connection. The DLNA connection between the Player and PC is unstable. IP addresses within the same subnetwork should be unique. If they ~ ~ are not, IP interference can cause this phenomenon. Check if you have a firewall enabled. If so, disable the firewall function. ~ ~ BD-LIVE I cannot connect to the BD-LIVE server. Check whether the network connection is working or not by ~ ~ accessing Network Status in Network Settings (Settings > Network Settings > Network Status). Check whether the USB memory device is connected to the player. ~ ~ The memory device must have at least 1GB of free space to ~ ~ accommodate the BD-LIVE service. You can check the available size in BD Data Management. Check whether the BD-LIVE Internet Connection menu is set to Allow(All). ~ ~ If all above fails, contact the content provider or update the player ~ ~ to the latest firmware. When using the BD-LIVE service, an error occurs. The memory device must have at least 1GB of free space to ~ ~ accommodate the BD-LIVE service. You can check the available size in BD Data Management. NOTES ✎ ✎ When the factory default settings are restored, all stored user BD data is deleted. ■ ■ Repairs If you contact us to repair your player, an administration fee may be charged if either: An engineer is called out to your home at your request and there is no defect in the product. 111 You bring the unit to a repair center and there is no defect in the product. 222 We will provide you with the amount of the administration fee before we make a home visit or begin any work on your player. We recommend you read this manual thoroughly, search for a solution on line at www.samsung.com, or contact Samsung Customer Care at 1-800-SAMSUNG (726-7864) before seeking to repair your player. Appendix Troubleshooting Before requesting service, please try the following solutions. PROBLEM SOLUTION No operation can be performed with the remote control. Check the batteries in the remote control. They may need replacing. ~ ~ Operatetheremotecontrolatadistanceofnomorethan20feetfromtheplayer. ~ ~ Remove the batteries, and then hold down one or more buttons for ~ ~ several minutes to drain the microprocessor inside the remote control to reset it. Reinstall the batteries and try to operate the remote control again. The disc does not play. Ensure that the disc is installed with the label side facing up. ~ ~ Check the region number of the Blu-ray Disc/DVD. ~ ~ The Disc Menu does not appear. Ensure that the disc has disc menus. ~ ~ The prohibition message appears on the screen. This message appears when an invalid button is pressed. ~ ~ The Blu-ray Disc/DVD’s software doesn’t support the feature (e.g., angles). ~ ~ You’verequestedatitleorchapternumberorsearchtimethatisoutofrange. ~ ~ Play mode differs from the Setup Menu selection. Some of the functions selected in the Setup Menu may not ~ ~ work properly if those functions are not encoded on the disc. You cannot change the screen aspect ratio (screen size). The Screen Ratio on your Blu-ray Disc/DVD Disc is fixed and cannot ~ ~ be changed. This is not a problem with the player. ~ ~ No audio. Make sure you have selected the correct Digital Output in the ~ ~ Audio Options Menu. The screen is blank. If the HDMI output is set to a resolution your TV cannot support (for ~ ~ example, 1080p), you may not see a picture on your TV. Press the ~ ~ ^ button (on the front panel) for more than 5 seconds with no disc inside. All settings will revert to the factory settings. Whenthefactorydefaultsettingsarerestored,allstoreduserBDdatais ~ ~ deleted. Forgot password Press th ~ ~ e ^ button (on the front panel) for more than 5 seconds with no disc inside. All settings including the password will revert to the factory settings. Don’t use this unless absolutely necessary. Whenthefactorydefaultsettingsarerestored,allstoreduserBDdataisdeleted. ~ ~ The picture is noisy or distorted Make sure that the disc is not dirty or scratched. ~ ~ Clean the disc. ~ ~ No HDMI output. Check the connection between the TV and the HDMI jack of the player. ~ ~ CheckifyourTVsupports480p,720p,1080i,or1080pHDMIinputresolutions. ~ ~ Abnormal HDMI output screen. If random noise appears on the screen, it means that TV does not ~ ~ support HDCP (High-bandwidth Digital Content Protection).
27 Specifications General Power Requirements AC110-120V 50/60Hz Power Consumption 10.8W Weight 2.2 Ibs Dimensions 11.4 (W) X 8.7 (D) X 1.5 (H) inches Operating Temperature Range +41°F to +95°F Operating Humidity Range 10 % to 75 % USB Type A USB 2.0 DC output 5V 0.5A Max. HDMI Video 1080p, 1080i, 720p, 480p Audio PCM, Bitstream Audio Output Digital Audio Output Coaxial Network Ethernet 100BASE - TX Terminal Wireless LAN Built-In Security WEP (OPEN/SHARED) WPA-PSK (TKIP/AES) WPA2-PSK (TKIP/AES) WPS(PBC) Supported Network speeds equal to or below 10Mbps are not supported. - - Design and specifications are subject to change without prior notice. - - Weight and dimensions are approximate. - - Dispose unwanted electronics through an approved recycler. - - To find the nearest recycling location, go to our website: www.samsung.com/ recyclingdirect or call, (877) 278 - 0799 Compliance and Compatibility Notice NOT ALL discs are compatible Subject to the restrictions described below and those noted throughout this Manual, ● ● including the Disc Type and Characteristics section of this user manual, disc types that can be played are: pre-recorded commercial BD-ROM, DVD-VIDEO, and Audio CD (CD-DA) discs; BD-RE/-R, DVD-RW/-R discs; and CD-RW/-R discs. Discs other than those listed above cannot be and are not intended to be played by this player. ● ● Some of the discs listed above may not play due to one or more reasons provided below. Samsung cannot guarantee that this player will play every disc bearing the BD-ROM, BD- ● ● RE/-R, DVD-VIDEO, DVD-RW/-R, DVD+RW/+R and CD-RW/-R logos, and this player may not respond to all operating commands or operate all features of every disc. These and other disc compatibility and player operation issues with new and existing format discs are possible because: Blu-ray is a new and evolving format. This player may not operate all Blu-ray features - - because 1.) some features may be optional, 2.) additional features may have been added to the Blu-ray Disc format after the production of this player, and 3.) certain features may be subject to delayed availability; not all new and existing disc format versions are supported by this player; - - new and existing disc formats may be revised, changed, updated, improved and/or - - supplemented; some discs are produced in a manner that allows specific or limited operation or restricts - - features during playback; some discs bearing the BD-ROM, BD-RE/-R, DVD-VIDEO, DVD-RW/-R, DVD+RW/+R and - - CD-RW/-R logos may still be non-standardized discs; some discs may not be played depending on their physical state or recording conditions; - - problems and errors can occur during the creation of Blu-ray Disc or DVD software - - and/or the manufacture of discs; this player operates differently than a standard DVD player or other AV equipment; - - and/or for reasons noted throughout this user manual and for other reason(s) discovered and - - posted by SAMSUNG customer care center. If you encounter disc compatibility or player operation problems, please contact the ● ● SAMSUNG customer care center. You may also contact the SAMSUNG customer care center for possible updates to this player. For additional information on playback restrictions and disc compatibility, refer to the ● ● following sections of this users' manual : Precautions, Before reading the user manual, Disc Types and Characteristics, and Before Playing. For Blu-ray Disc Player progressive scan output ● ● : CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS PRODUCT, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.
Copy Protection Because AACS (Advanced Access Content System) is approved as the content protection ● ● system for the Blu-ray Disc format, similar to use of CSS (Content Scramble System) for the DVD format, certain restrictions are imposed on playback, analog signal output, etc., of AACS protected contents. The operation of this product and restrictions on this product may vary depending on your time of purchase as those restrictions may be adopted and/or changed by AACS after the production of this product. Furthermore, BD-ROM Mark and BD+ are additionally used as content protection systems for the Blu-ray Disc format, which imposes certain restrictions including playback restrictions for BD-ROM Mark and/or BD+ protected contents. To obtain additional information on AACS, BD-ROM Mark, BD+, or this product, please contact SAMSUNG customer care center. Many Blu-ray Disc/DVDs are encoded with copy protection. Because of this, you should ● ● only connect your Player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copy-protected Blu-ray Disc/DVDs. Under the U.S. Copyright laws and Copyright laws of other countries, unauthorized ● ● recording, use, display, distribution, or revision of television programs, videotapes, Blu-ray Discs, DVDs, and other materials may subject you to civil and/or criminal liability. Cinavia Notice ● ● : This product uses Cinavia technology to limit the use of unauthorized copies of some commercially-produced film and videos and their soundtracks. When a prohibited use of an unauthorized copy is detected, a message will be displayed and playback or copying will be interrupted. More information about Cinavia technology is provided at the Cinavia Online Consumer Information Center at http://www.cinavia.com. To request additional information about Cinavia by mail, send a postcard with your mailing address to: Cinavia Consumer Information Center, P.O. Box 86851, San Diego CA, 92138, USA. This product incorporates proprietary technology under licence from Verance Corporation and is protected by U.S. Patent 7,369,677 and other U.S. and worldwide patents issued and pending as well as copyright and trade secret protection for certain aspects of such technology. Cinavia is a trademark of Verance Corporation. Copyright 2004-2013 Verance Corporation. All rights reserved by Verance. Reverse engineering or disassembly is prohibited. Network Service Disclaimer All content and services accessible through this device belong to third parties and are protected by copyright, patent, trademark and/or other intellectual property laws. Such content and services are provided solely for your personal noncommercial use. You may not use any content or services in a manner that has not been authorized by the content owner or service provider. Without limiting the foregoing, unless expressly authorized by the applicable content owner or service provider, you may not modify, copy, republish, upload, post, transmit, translate, sell, create derivative works, exploit, or distribute in any manner or medium any content or services displayed through this device. THIRD PARTY CONTENT AND SERVICES ARE PROVIDED "AS IS." SAMSUNG DOES NOT WARRANT CONTENT OR SERVICES SO PROVIDED, EITHER EXPRESSLY OR IMPLIEDLY, FOR ANY PURPOSE. SAMSUNG EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. SAMSUNG DOES NOT GUARANTEE THE ACCURACY, VALIDITY, TIMELINESS, LEGALITY, OR COMPLETENESS OF ANY CONTENT OR SERVICE MADE AVAILABLE THROUGH THIS DEVICE AND UNDER NO CIRCUMSTANCES, INCLUDING NEGLIGENCE, SHALL SAMSUNG BE LIABLE, WHETHER IN CONTRACT OR TORT, FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, ATTORNEY FEES, EXPENSES, OR ANY OTHER DAMAGES ARISING OUT OF, OR IN CONNECTION WITH, ANY INFORMATION CONTAINED IN, OR AS A RESULT OF THE USE OF ANY CONTENT OR SERVICE BY YOU OR ANY THIRD PARTY, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Third party services may be terminated or interrupted at any time, and Samsung makes no representation or warranty that any content or service will remain available for any period of time. Content and services are transmitted by third parties by means of networks and transmission facilities over which Samsung has no control. Without limiting the generality of this disclaimer, Samsung expressly disclaims any responsibility or liability for any interruption or suspension of any content or service made available through this device. Samsung is neither responsible nor liable for customer service related to the content and services. Any question or request for service relating to the content or services should be made directly to the respective content and service providers. License Manufactured under license from Dolby Laboratories. Dolby and the ● ● double-D symbol are trademarks of Dolby Laboratories. For DTS patents, see http://patents.dts.com. Manufactured under license ● ● from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS 2.0+Digital Out is a trademark of DTS, Inc. © DTS, Inc. All Rights Reserved. The terms HDMI and HDMI High-Definition Multimedia Interface, ● ● and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. Oracle and Java are registered trademarks of Oracle and/or its affiliates. ● ● Other names may be trademarks of their respective owners Open Source License Notice ● ● In the case of using open source software, Open Source Licenses are available on the - - product menu. Blu-ray Disc™, Blu-ray™ and the logos are trademarks of the Blu-ray Disc Association. ● ● DLNA ● ● ® , the DLNA Logo and DLNA CERTIFIED® are trademarks, service marks, or certification marks of the Digital Living Network Alliance. 2.0+Digital Out
LIMITED WARRANTY TO ORIGINAL PURCHASER This SAMSUNG brand product, as supplied and distributed by SAMSUNG and delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited warranty period of: One (1) Year Parts and Labor* (*90 Days Parts and Labor for Commercial Use) This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United States. To receive warranty service, the purchaser must contact SAMSUNG for problem determination and service procedures. Warranty service can only be performed by a SAMSUNG authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNG's authorized service center. Transportation of the product to and from the service center is the responsibility of the purchaser. SAMSUNG will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above. All replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG. Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is longer. SAMSUNG’s obligations with respect to software products distributed by SAMSUNG under the SAMSUNG brand name are set forth in the applicable end user license agreement. Non-SAMSUNG hardware and software products, if provided, are on an "AS IS" basis. Non-SAMSUNG manufacturers, suppliers, publishers, and service providers may provide their own warranties. This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, and except to the extent otherwise expressly provided for in this statement, noncommercial use of this product, and shall not apply to the following, including, but not limited to: damage which occurs in shipment; delivery and installation; applications and uses for which this product was not intended; altered product or serial numbers; cosmetic damage or exterior finish; accidents, abuse, neglect, fire, water, lightning or other acts of nature; use of products, equipment, systems, utilities, services, parts, supplies, accessories, applications, installations, repairs, external wiring or connectors not supplied and authorized by SAMSUNG, or which damage this product or result in service problems; incorrect electrical line voltage, fluctuations and surges; customer adjustments and failure to follow operating instructions, cleaning, maintenance and environmental instructions that are covered and prescribed in the instruction book; product removal or reinstallation; reception problems and distortion related to noise, echo, interference or other signal transmission and delivery problems. SAMSUNG does not warrant uninterrupted or error-free operation of the product. THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY PERIODS STATED ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO PURCHASER AND PURCHASER’S PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT SOLD BY SAMSUNG NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF SAMSUNG. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY. Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. To obtain warranty service, please contact the SAMSUNG customer care center. The benefits of this Limited Warranty extend only to the original purchaser of Samsung products from an authorized Samsung reseller. THIS LIMITED WARRANTY SHALL NOT APPLY TO ANY SAMSUNG PRODUCTS PURCHASED FROM UNAUTHORIZED RESELLERS OR RETAILERS, EXCEPT IN STATES WHERE SUCH RESTRICTION MAY BE PROHIBITED. For a list of Samsung authorized retailers, please go to: http://www.samsung.com/us/peaceofmind/authorized_resellers.html.
© 2014 Samsung Electronics Co.,Ltd. All rights reserved QUESTIONS OR COMMENTS? COUNTRY CALL OR VISIT US ONLINE AT WRITE IN THE US 1-800-SAMSUNG (726-7864) www.samsung.com/us/support Samsung Electronics America, Inc. 85 Challenger Road Ridgefield Park, NJ 07660
Have a question about the Samsung BD-J5700 but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Samsung BD-J5700. Please make sure that you describe your difficulty with the Samsung BD-J5700 as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.