Samsung BD-J5500 manual

View a manual of the Samsung BD-J5500 below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Samsung
  • Product: Blu-ray player
  • Model/name: BD-J5500
  • Filetype: PDF
  • Available languages: English, French, Italian, Danish, Polish

Table of Contents

Page: 0
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service,
please register your product at
www.samsung.com/register
Blu-ray™ Disc Player
user manual
BD-J5500
ENGLISH
Page: 1
Safety Information
Warning
The slots and openings in the cabinet and
••
in the back or bottom are provided for
necessary ventilation. To ensure reliable
operation of this apparatus, and to protect it
from overheating, these slots and openings
must never be blocked or covered.
Do not place this apparatus in a confined
-
-
space, such as a bookcase, or built-
in cabinet, unless proper ventilation is
provided.
Do not place this apparatus near or over
-
-
a radiator or heat register, or where it is
exposed to direct sunlight.
Do not place vessels (vases etc.)
-
-
containing water on this apparatus. A
water spill can cause a fire or electric
shock.
Do not expose this apparatus to rain or place
••
it near water (near a bathtub, washbowl,
kitchen sink, or pool, etc.). If this apparatus
accidentally gets wet, unplug it and contact
an authorized dealer immediately.
This apparatus uses batteries. In your
••
community, there might be environmental
regulations that require you to dispose of
these batteries properly. Please contact
your local authorities for disposal or
recycling information.
Do not overload wall outlets, extension
••
cords or adaptors beyond their capacity,
since this can result in fire or electric shock.
Route power-supply cords so that they
••
are not likely to be walked on or pinched
by items placed on or against them. Pay
particular attention to cords at the plug
end, at wall outlets, and the point where
they exit from the apparatus.
To protect this apparatus from a lightning
••
storm, or when it is left unattended and
unused for long periods of time, unplug
it from the wall outlet and disconnect the
antenna or cable system. This will prevent
damage to the set due to lightning and
power line surges.
Before connecting the AC power cord
••
to the DC adaptor outlet, make sure the
voltage designation of the DC adaptor
corresponds to the local electrical supply.
Never insert anything metallic into the open
••
parts of this apparatus. Doing so may
create a danger of electric shock.
To avoid electric shock, never touch the
••
inside of this apparatus. Only a qualified
technician should open this apparatus.
Make sure to plug the power cord in until
••
it is firmly seated. When unplugging the
power cord from a wall outlet, always pull
on the power cord’s plug. Never unplug by
pulling on the power cord. Do not touch
the power cord with wet hands.
If this apparatus does not operate normally
••
- in particular, if there are any unusual
sounds or smells coming from it - unplug
it immediately and contact an authorized
dealer or service center.
Maintenance of Cabinet.
••
Before connecting other components to
-
-
this product, be sure to turn them off.
If you move your product suddenly
-
-
from a cold place to a warm place,
condensation may occur on the
operating parts and lens and cause
abnormal disc playback. If this occurs,
unplug the product, wait for two hours,
and then connect the plug to the power
outlet. Then, insert the disc, and try to
play back again.
Be sure to pull the power plug out of the
••
outlet if the product is to remain unused or
if you are leaving the house for an extended
period of time (especially when children,
elderly, or disabled people will be left alone
in the house).
Accumulated dust can cause an electric
-
-
shock, an electric leakage, or a fire by
causing the power cord to generate
sparks and heat or the insulation to
deteriorate.
Contact an authorized service center for
••
information if you intend to install your
product in a location with heavy dust, high
or low temperatures, high humidity, chemical
substances, or where it will operate 24 hours
a day such as in an airport, a train station,
etc. Failing to do so may lead to serious
damage of your product.
Use only a properly grounded plug and wall
••
outlet.
An improper ground may cause electric
-
-
shock or equipment damage. (Class l
Equipment only.)
To turn this apparatus off completely, you
••
must disconnect it from the wall outlet.
Consequently, the wall outlet and power plug
must be readily accessible at all times.
Do not allow children to hang on the product.
••
Store the accessories (battery, etc.) in a
••
location safely out of the reach of children.
Do not install the product in an unstable
••
location such as a shaky self, a slanted
floor, or a location exposed to vibration.
Do not drop or strike the product. If the
••
product is damaged, disconnect the power
cord and contact a service center.
To clean this apparatus, unplug the power
••
cord from the wall outlet and wipe the
product using a soft, dry cloth. Do not
use any chemicals such as wax, benzene,
alcohol, thinners, insecticide, air fresheners,
lubricants, or detergent. These chemicals
can damage the appearance of the product
or erase the printing on the product.
Do not expose this apparatus to dripping
••
or splashing. Do not put objects filled with
liquids, such as vases on the apparatus.
Do not dispose of batteries in a fire.
••
Do not plug multiple electric devices into the
••
same wall socket. Overloading a socket can
cause it to overheat, resulting in a fire.
There is danger of an explosion if you
••
replace the batteries used in the remote
with the wrong type of battery. Replace
only with the same or equivalent type.
WARNING - TO PREVENT
••
THE SPREAD OF FIRE, KEEP
CANDLES AND OTHER
ITEMS WITH OPEN FLAMES
AWAY FROM THIS PRODUCT
AT ALL TIMES.
This symbol indicates that high
voltage is present inside. It is
dangerous to make any kind of
contact with any internal part
of this product.
This symbol indicates that
important literature concerning
operation and maintenance has
been included with this product.
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE THE
COVER(OR BACK). THERE ARE NO USER
SERVICEABLE PARTS INSIDE. REFER ALL
SERVICING TO QUALIFIED PERSONNEL.
2
Page: 2
WARNING - This product contains
••
chemicals known to the State of California
to cause cancer and reproductive toxicity.
CLASS 1 LASER product
This Compact Disc player is classified as a
CLASS 1 LASER product. Use of controls,
adjustments or performance of procedures
other than those specified herein may result in
hazardous radiation exposure.
CAUTION :
THIS PRODUCT USES AN INVISIBLE
••
LASER BEAM WHICH CAN CAUSE
HAZARDOUS RADIATION EXPOSURE
IF DIRECTED. BE SURE TO OPERATE
PRODUCT CORRECTLY AS INSTRUCTED.
THIS PRODUCT UTILIZES A LASER.
••
USE OF CONTROLS OR ADJUSTMENTS
OR PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE. DO NOT OPEN COVERS
AND DO NOT REPAIR YOURSELF. REFER
SERVICING TO QUALIFIED PERSONNEL.
	 This product satisfies CE regulations when
shielded cables and connectors are used
to connect the unit to other equipment.
To prevent electromagnetic interference
with electric appliances, such as radios
and televisions, use shielded cables and
connectors for connections.
CLASS 1	 LASER PRODUCT
KLASSE 1	 LASER PRODUKT
LUOKAN 1	 LASER LAITE
KLASS 1 	 LASER APPARAT
PRODUCTO	 LÁSER CLASE 1
NOTES
✎
✎
If the Region number of a Blu-ray Disc/DVDs
`
`
does not correspond to the Region number of
this product, the product cannot play the disc.
IMPORTANT NOTE
The mains lead on this equipment is supplied
with a molded plug incorporating a fuse. The
value of the fuse is indicated on the pin face of
the plug.
If it requires replacing, a fuse approved to
BS1362 of the same rating must be used.
Never use the plug with the fuse cover
omitted if the cover is detachable. If a
replacement fuse cover is required, it must be
of the same colour as the pin face of the plug.
Replacement covers are available from your
dealer.
If the fitted plug is not suitable for the power
points in your house or the cable is not long
enough to reach a power point, you should
obtain a suitable safety approved extension
lead or consult your dealer for assistance.
However, if there is no alternative to cutting
off the plug, remove the fuse and then safely
dispose of the plug. Do not connect the plug
to a mains jack, as there is a risk of shock
hazard from the bared flexible cord.
To disconnect the apparatus from the mains,
the plug must be pulled out from the mains
socket, therefore the mains plug shall be
readily operable.
The product unit accompanying this user
manual is licenced under certain intellectual
property rights of certain third parties.
Precautions
Important Safety Instructions
Read these operating instructions carefully
before using the unit. Follow all the safety
instructions listed below.
Keep these operating instructions handy for
future reference.
1.	 Read these instructions.
2.	 Keep these instructions.
3.	 Heed all warnings.
4.	 Follow all instructions.
5.	 Do not use this apparatus near water.
6.	 Clean only with a dry cloth.
7.	 Do not block any ventilation openings.
Install in accordance with the
manufacturer’s instructions.
8.	 Do not install near any heat sources such
as radiators, heat registers, stoves, or
other apparatus (including AV receivers)
that produce heat.
9.	 Do not defeat the safety purpose of
the polarized or grounding-type plug. A
polarized plug has two blades with one
wider than the other. A grounding type
plug has two blades and a third grounding
prong. The wide blade or the third
prong are provided for your safety. If the
provided plug does not fit into your outlet,
consult an electrician for replacement of
the obsolete outlet.
10.	
Protect the power cord from being walked
on or pinched particularly at plugs,
convenience receptacles, and the point
where it exits the apparatus.
11.	
Only use attachments/accessories
specified by the manufacturer.
12.	
Use only with the cart,
stand, tripod, bracket,
or table specified by
the manufacturer,
or sold with the
apparatus. When
a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13.	
Unplug this apparatus during lightning
storms or when unused for long periods of
time.
14.	
Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way,
such as when the power-supply cord or
plug is damaged, liquid has been spilled
or objects have fallen into the apparatus,
the apparatus has been exposed to rain
or moisture, does not operate normally, or
has been dropped.
3
Page: 3
Safety Information
Warning........................................................2
Precautions..................................................3
Using the 3D function...................................4
Getting Started
Before using the User Manual.......................5
Logos of Discs the player can play...............5
Accessories..................................................7
Front Panel...................................................7
Rear Panel.
...................................................7
Remote Control............................................8
Connections
Connecting to a TV.
......................................8
Connecting to an Audio System...................9
Connecting to a Network Router..................9
Settings
The Setup Procedure.
.................................10
Menu Navigation.
........................................10
Accessing the Settings Menu.....................10
Picture Settings..........................................10
Sound Settings.
..........................................11
Network Settings........................................13
System Settings.........................................14
Language Settings.
.....................................14
Security Settings........................................14
General Settings.........................................14
Support Settings........................................15
Media Play
Playing a Commercially Recorded Disc.......16
Playing Files on a USB Device....................16
Playing a Disc with User Recorded
Content......................................................16
Using DLNA.
...............................................17
Controlling Video Playback.........................17
Controlling Music Playback.
........................17
Playing Photo Contents..............................19
Appendix
Troubleshooting..........................................19
Specifications.............................................21
Using the 3D function
IMPORTANT HEALTH AND SAFETY
INFORMATION FOR 3D PICTURES.
Read and understand the following safety
information before using the 3D function.
Some viewers may experience discomfort
••
while viewing 3D TV such as dizziness,
nausea, and headaches.
If you experience any such symptom,
stop viewing 3D TV, remove the 3D Active
Glasses, and rest.
Watching 3D images for an extended
••
period of time may cause eye strain. If you
feel eye strain, stop viewing 3D TV, remove
your 3D Active Glasses, and rest.
A responsible adult should frequently check
••
on children who are using the 3D function.
If there are any reports of tired eyes,
headaches, dizziness, or nausea, have the
child stop viewing 3D TV and rest.
Do not use the 3D Active Glasses for other
••
purposes (Such as general eyeglasses,
sunglasses, protective goggles, etc.).
Do not use the 3D function or 3D Active
••
Glasses while walking or moving around.
Using the 3D function or 3D Active Glasses
while moving around may cause you to
bump into objects, trip, and/or fall, and
cause serious injury.
If you want to enjoy 3D content, connect
••
a 3D device (3D compliant AV receiver or
TV) to the player's HDMI OUT port using a
high-speed HDMI cable. Put on 3D glasses
before playing the 3D content.
The player outputs 3D signals only through
••
HDMI cable connected to the HDMI OUT
port.
As the video resolution in 3D play mode
••
is fixed according to the resolution of the
original 3D video, you can not change the
resolution to your preference.
Some functions such as BD Wise, screen
••
size adjustment, and resolution adjustment
may not operate properly in 3D play mode.
You must use a high-speed HDMI cable for
••
proper output of the 3D signal.
Stay at least three times the width of the
••
screen from the TV when watching 3D
images. For example, if you have a 46-inch
screen, stay 138 inches (11.5 feet) from the
screen.
Place the 3D video screen at eye level for
••
the best 3D picture.
When the player is connected to some 3D
••
devices, the 3D effect may not function
properly.
This player does not convert 2D content
••
into 3D.
"Blu-ray 3D" and "Blu-ray 3D" logo are
••
trademarks of the Blu-ray Disc Association.
Contents
4
Page: 4
Getting Started
Before using the User Manual
Disc Types and Contents your player can play
Media Disc Type Details
VIDEO
Blu-ray Disc
3D Blu-ray Disc
BD-ROM or BD-RE/-R recorded in the BD-RE format.
DVD-VIDEO
DVD-RW
DVD-R
DVD+RW
DVD+R
DVD-VIDEO, recorded DVD+RW/DVD-RW(V)/DVD-R/+R that have
been recorded and finalized, or a USB storage media containing DivX,
MKV or MP4 contents.
MUSIC
CD-RW/-R,
DVD-RW/-R,
BD-RE/-R
Music recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R or a USB
storage media containing MP3 or WMA contents.
PHOTO
CD-RW/-R,
DVD-RW/-R,
BD-RE/-R
Photos recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R or a USB
storage media containing JPEG contents.
NOTES
✎
✎
The player may not play certain CD-RW/-R and DVD-R because of the disc type or recording conditions.
`
`
If a DVD-RW/-R has not been recorded properly in DVD video format, it will not be playable.
`
`
Your player will not play content that has been recorded on a DVD-R at a bit-rate that exceeds 10 Mbps.
`
`
Your player will not play content that has been recorded on a BD-R or USB device at a bit rate that exceeds
`
`
25 Mbps.
Playback may not work for some types of discs, or when you use specific functions, such as angle change
`
`
and aspect ratio adjustment. Information about the discs is written in detail on the disc box. Please refer to
this if necessary.
When you play a BD-J title, loading may take longer than a normal title or some functions may perform slowly.
`
`
Disc types your player cannot play
HD DVD
••
DVD-ROM/PD/
••
MV, etc
DVD-RAM
••
Super Audio CD
••
(except CD layer)
DVD-RW (VR mode)
••
CVD/CD-ROM/CDV/
••
CD-G/CD-I/LD
(CD-Gs play audio
only, not graphics.)
3.9 GB DVD-R for
••
Authoring.
Region Code
Both players and discs are coded by region.
These regional codes must match for a disc
to play. If the codes do not match, the disc
will not play.
The Region Number for this player is
displayed on the rear panel of the player.
Disc
Type
Region
Code
Area
Blu-ray
Disc
a
North America, Central
America, South America,
Korea, Japan, Taiwan, Hong
Kong and South East Asia.
b
Europe, Greenland, French
territories, Middle East, Africa,
Australia and New Zealand.
c India, China, Russia, Central
and South Asia.
DVD-
VIDEO
1 The U.S., U.S. territories and
Canada
2 Europe, Japan, the Middle
East, Egypt, Africa, Greenland
3 Taiwan, Korea, the Philippines,
Indonesia, Hong Kong
4
Mexico, South America,
Central America, Australia,
New Zealand, Pacific Islands,
Caribbean
5 Russia, Eastern Europe, India,
North Korea, Mongolia
6 China
Logos of Discs the player can play
Blu-ray Disc BD-LIVE
3D Blu-ray Disc DivX
PAL broadcast System in U.K., France, Germany,
etc.
Supported File Formats
Notes on the USB connection
Your player supports USB storage media,
••
MP3 players, digital cameras, and USB
card readers.
The player does not support folder or file
••
names longer than 128 characters.
Some USB/External HDD/digital camera
••
devices may not be compatible with the
player.
Your player supports the FAT16, FAT32,
••
and NTFS file systems.
Connect USB devices directly to the
••
player’s USB port. Connecting through
a USB cable may cause compatibility
problems.
Inserting more than one memory device
••
into a multi-card reader may cause the
reader to operate improperly.
The player does not support the PTP
••
protocol.
5
Page: 5
Do not disconnect a USB device during a "loading" process.
••
The bigger the image reso
•• lution, the longer the image takes to display.
This player cannot play MP3 files with DRM (Digital Rights Management) downloaded from
••
commercial sites.
Your player only supports video with a frame rate under 30fps (frames per second).
••
Your player only supports USB Mass Storage Class (MSC) devices such as thumb drives
••
and USB HDD. (HUB is not supported.)
Certain USB HDD Devices, multi-card readers and thumb drives may not be compatible with
••
this player.
If some USB devices require excessive power, they may be limited by the circuit safety
••
device.
If playback from a USB HDD is unstable, provide additional power by plugging the HDD into
••
a wall socket.
If the problem continues, contact the USB HDD manufacturer.
SAMSUNG is not responsible for any data file damage or data loss.
••
Your player does not support NTFS compressed files, sparse files, or encrypted files.
••
You can repair or format a USB device on your Desktop PC. (MS-Windows OS only)
••
Video File Support
File Extension Container Video Codec Audio Codec Resolution
*.avi AVI
DivX 3.11/4/5/6 MP3
Dolby Digital
DTS
WMA
PCM
1920x1080
MP4v3
H.264 BP/MP/HP 1920x1080
*.mkv MKV
VC-1 AP MP3
Dolby Digital
DTS
1920x1080
H.264 BP/MP/HP 1920x1080
*.wmv WMV (wmv9)
VC-1 AP
WMA
1920x1080
VC-1 SM 1920x1080
*.mp4 MP4
MP4 (mp4v)
AAC
1920x1080
H.264 BP/MP/HP 1920x1080
*.mpg
*.mpeg
MPEG
MPEG1
MP1, 2
Dolby Digital
DTS
1920x1080
MPEG2 1920x1080
H.264 BP/MP/HP 1920x1080
Limitations
•
•
Even when a file is encoded by a supported codec listed above, the file might not be
-
-
played if its content has a problem.
Normal playback is not guaranteed if the file’s container information is wrong or the file
-
-
itself is corrupted.
Files having a higher Bit rate/frame rate than standard may stutter during sound/video playback.
-
-
The Seek (skip) function is not available if the file’s index table is damaged.
-
-
Video decoder
•
•
Supports up to H.264 Level 4.1 and AVCHD
-
-
Does not support H.264 FMO/ASO/RS and VC1 SP/MP/AP L4
-
-
MPEG4 SP, ASP :
-
-
Below 1280 x 720 : 60 frames max
Above 1280 x 720 : 30 frames max
Does not support GMC 2 or higher
-
-
Audio decoder
•
•
Supports WMA 7, 8, 9 and STD
-
-
Does not support WMA sampling rate of 22050Hz mono.
-
-
AAC: Max sampling rate: 96Khz (8, 11, 12, 16, 22,24, 32,44.1, 48, 64, 88.2, 96)
-
-
Max bit rate: 320kbps
Supported DivX subtitle file formats
„
„
*.ttxt, *.smi, *.srt, *.sub, *.txt
NOTES
✎
✎
Playback of some DivX, MKV or MP4 file may not be supported depending on their video resolution and
`
`
frame rate.
Music File Support
File Extension Container Audio Codec Support Range
*.mp3 MP3 MP3 -
*.wma WMA WMA
* 
Sampling rates (in kHz) - 8, 11, 16, 22, 32, 44.1, 48
* 
Bit rates - All bit-rates from 5kbps to 355kbps
6
Page: 6
Picture File Support
File Extension Type Resolution
*.jpg
*.jpeg
*.jpe
JPEG 15360x8640
*.png PNG 15360x8640
AVCHD (Advanced Video Codec High Definition)
This player can play back AVCHD format discs. These discs are normally recorded and used
••
in camcorders.
The AVCHD format is a high definition digital video camera format.
••
The MPEG-4 AVC/H.264 format compresses images with greater efficiency than the
••
conventional image compressing format.
Some AVCHD discs use the "x.v.Color" format. This player can play back AVCHD discs that
••
use "x.v.Color" format.
"x.v.Color" is a trademark of Sony Corporation.
••
"AVCHD" and the AVCHD logo are trademarks of Matsushita Electronic Industrial Co., Ltd.
••
and Sony Corporation.
NOTES
✎
✎
Some AVCHD format discs may not play, depending on the recording condition.
`
`
AVCHD format discs need to be finalized.
"x.v.Color" offers a wider colour range than normal DVD camcorder discs.
`
`
Accessories
Check for the supplied accessories shown below.
Batteries for Remote Control
(AAA Size)
User Manual Remote Control
Front Panel
DISC TRAY
POWER BUTTON
OPEN/CLOSE BUTTON
USB HOST
REMOTE CONTROL SENSOR
NOTES
✎
✎
You can perform software upgrades using the USB Host jack with a USB flash memory stick only.
`
`
Please open and pull out the USB cover before inserting USB device.
`
`
Rear Panel
HDMI OUT LAN DIGITAL AUDIO OUT
7
Page: 7
Remote Control
Tour of the Remote Control
SCREEN
A-B
VIEW
FULL
BONUS REPEAT REPEAT
AUDIO HOME SUBTITLE
Turn the player on and off.
Allows you to repeat A-B disc.
Press numeric buttons to operate options.
Press to open and close the disc tray.
Use to enter the disc menu.
Press to skip backwards or forwards.
Press to stop a disc.
Press to use Bonusview function.
Return to the previous menu.
These buttons are used both for menus on the
player and also several Blu-ray Disc functions.
Use to select menu items and change menu
values.
Press to use Tools menu.
Use to access various audio functions on a
disc (Blu-ray Disc/DVD).
Press to play a disc.
Press to pause a disc.
Turn the TV on and off.
Press to switch the Blu-ray Disc/DVD's
subtitle language.
Use to enter the popup menu/title menu.
Press to search a disc backwards or
forwards.
Press to move to the home menu.
Press to see the full screen on a TV.
During Blu-ray or DVD disc playback, the
Full screen button does not operate.
Press to exit the menu.
Use to display the playback information.
Allows you to repeat a title, chapter, track or
disc.
TV volume adjustment.
After setup, allows you to set the input
source on your TV.
Installing batteries
NOTES
✎
✎
If the remote does not operate properly:
`
`
Check the polarity (+/–) of the batteries.
••
Check if the batteries are drained.
••
Check if the remote sensor is blocked by obstacles.
••
Check if there is any fluorescent lighting nearby.
••
CAUTION
!
!
Dispose of batteries according to local environmental
`
`
regulations. Do not put them in the household trash
Do not dispose of batteries in a fire.
`
`
Do not short circuit, disassemble or overheat the batteries.
`
`
Danger of explosion if battery is incorrectly replaced.
`
`
Replace only with the same or equivalent type.
Connections
Connecting to a TV
Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to
the HDMI IN jack on your TV.
Do not connect the power cord to the wall outlet until you have made all the other
-
-
connections.
When you change the connections, turn off all devices before you start.
-
-
Audio
Video
NOTES
✎
✎
If you use an HDMI-to-DVI cable to connect to your display device, you must also connect the Digital Audio
`
`
Out on the player to an audio system to hear audio.
An HDMI cable outputs digital video and audio, so you don't need to connect an audio cable.
`
`
Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of
`
`
your TV.
When you connect the player to your TV using the HDMI cable or to a new TV, and then turn it on for the
`
`
first time, the player automatically sets the HDMI output resolution to the highest supported by the TV.
A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Colour to Off in the menu.
`
`
To view video in the HDMI 720p, 1080i, or 1080p output mode, you must use a High speed HDMI cable.
`
`
HDMI outputs only a pure digital signal to the TV.
`
`
If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on
the screen.
8
Page: 8
Connecting to an Audio System
You can connect the Blu-ray player to an audio system using one of the methods illustrated
below.
Do not connect the power cord to the wall outlet until you have made all the other
-
-
connections.
When you change the connections, turn off all devices before you start.
-
-
Method 1 Connecting to an HDMI compatible AV receiver
Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product
••
to the HDMI IN jack on your receiver.
Best quality (Recommended)
••
Method 2 Connecting to an AV receiver with a Digital Coaxial Cable
Using a digital Coaxial cable (not supplied), connect the Coaxial Digital Audio Out jack on the
••
product to the Digital Coaxial In jack of the receiver.
Good quality
••
You will hear sound only through the front two speakers with Digital Output set to PCM.
••
Audio
Audio
Method 2
Method 1
Connecting to a Network Router
You can connect your player to your network router using one of the methods illustrated below.
To use the DLNA network functionality, you must connect your PC to your network as shown
in the illustration.
Wired Network
Broadband
service
Broadband
service
Broadband modem
(with integrated router)
Broadband
modem
Router
Or
NOTES
✎
✎
Internet access to Samsung's software update server may not be allowed, depending on the router you use or your
`
`
ISP's policy. For more information, contact your ISP (Internet Service Provider).
DSL users, please use a router to make a network connection.
`
`
9
Page: 9
Settings
The Setup Procedure
The Home screen will not appear if you do not
••
configure the setup.
The OSD (On Screen Display) may change in this
••
player after you upgrade the software version.
The access steps may differ depending on the
••
menu you selected.
After the setup process is complete, you can
••
then operate the panel buttons and remote
control.
After you have connected the player to your
TV, turn on the TV and player. When you
turn on the player the first time, the player's
Setup screen appears on the TV. The Setup
procedure lets you set the On Screen Display
(OSD) and menu languages, the aspect ratio
(screen size), the network type, and connect
the player to your network.
NOTES
✎
✎
The Home menu will not appear if you do not
`
`
configure the setup except as noted below.
If you press the
`
` BLUE (D) button during
network setup, you can access the Home menu
even if the network setup is not completed yet.
When you return to the Home menu, the full
`
`
screen mode is cancelled automatically.
If you want to display the Initial Setting screen
`
`
again to make changes, press the ^ button on
the front panel of the player for more than 5
seconds with no disc inserted. This resets the
player to its default settings.
After the setup process is complete. you can
`
`
operate the HDMI-CEC function.
If you want to use the Anynet+(HDMI-CEC)
`
`
function to aid in the initial set up process,
please follow the instructions below.
1) Connect the player to an Anynet+(HDMI-
CEC) compliant Samsung TV using HDMI Cable.
2) Set the Anynet+(HDMI-CEC) feature to On in
both the TV and the player.
3) Set the TV to the Setup Procedure.
If you leave the player in the stop mode for
`
`
more than 5 minutes without using it, a screen
saver will appear on your TV. If the player is
left in the screen saver mode for more than 25
minutes, the power will automatically turn off.
Menu Navigation
SCREEN
A-B
VIEW
FULL
BONUS REPEAT REPEAT
AUDIO HOME SUBTITLE
1
2 4
3
1
HOME Button : Press to move to the Home
menu.
2 RETURN Button : Return to the previous menu.
3
v (Enter) / DIRECTION Button :
Move the cursor or select an item.
Activate the currently selected item.
Confirm a setting.
4 EXIT Button : Press to exit the current menu.
Home Menu
••
App 1 App 2 App 3 App 4	 App 5 App 6 Change Device Settings
Play Disc Photos Videos Music
No Disc
2
3
6
5
7
1
4
1 Selects Videos.
2 Selects Music.
3 Selects Settings.
4 Selects Change Device.
5 Selects Photos.
6 Selects Play disc.
7 Selects applications.
NOTES
✎
✎
The Videos, Photos, and Music options require
`
`
that you have an appropriate disc inserted into
the player or a USB flash device attached to
the player.
Accessing the Settings Menu
To access the Settings menu and sub-menus,
follow these steps:
Press the
111 POWER button.
The Home Menu appears.
Press the
222 ▲▼ ◄► buttons to select
Settings, and then press the v button.
Press the ▲▼ buttons to select the
333
desired submenu, and then press the v
button.
Press the ▲▼ buttons to select the desired
444
item, and then press the v button.
Press the
555 EXIT button to exit the menu.
NOTES
✎
✎
The access steps may differ depending on
`
`
the menu you selected. The OSD (On Screen
Display) may change in this player after you
upgrade the software version.
Picture Settings
You can configure various display options
such as the TV Aspect Ratio, Resolution, etc.
3D Settings
Select whether to play a Blu-ray Disc with 3D
contents in 3D Mode.
NOTES
✎
✎
For some 3D discs, to stop a movie during 3D
`
`
playback, press the 5 button once.
The movie stops and the 3D mode option is
de-activated.
To change a 3D option selection when you are
playing a 3D movie, press the 5 button once.
The Blu-ray menu appears. Press the 5
button again, then select 3D Settings in the
Blu-ray menu.
Depending on the content and the position of
`
`
the picture on your TV screen, you may see
vertical black bars on the left side, right side,
or both sides.
10
Page: 10
TV Aspect Ratio
Depending on the type of television you
have, you may want to adjust the screen size
setting.
NOTES
✎
✎
Depending on the disc type, some aspect
`
`
ratios may not be available.
If you select an aspect ratio and option which is
`
`
different than the aspect ratio of your TV screen,
the picture might appear to be distorted.
BD Wise (Samsung TVs only)
BD Wise is Samsung’s latest inter-connectivity
feature.
When you connect a Samsung player and a
Samsung TV with BD Wise to each other via
HDMI, and BD Wise is on in both the player
and TV, the player outputs video at the video
resolution and frame rate of the Blu-ray Disc/
DVDs.
NOTES
✎
✎
When BD Wise is on, the Resolution setting
`
`
automatically defaults to BD Wise and BD Wise
appears in the Resolution menu.
If the player is connected to a device that does not
`
`
support BD Wise, you cannot use the BD Wise function.
For proper operation of BD Wise, set the BD
`
`
Wise menu of both the player and the TV to On.
Resolution
Lets you set the output resolution of the
HDMI video signal to Auto, 1080p, 1080i,
720p or 576p/480p. The number indicates
the number of lines of video per frame. The
i and p indicate interlaced and progressive
scan, respectively. The more lines, the higher
the quality.
Resolution according to the output
mode
Blu-ray Disc/E-contents/Digital Contents
••
playback
Output
Setup
HDMI / connected
HDMI Mode
Blu-ray Disc
E-contents/
Digital
contents
BD Wise
Resolution of
Blu-ray Disc
1080p
Auto
Max. Resolution
of TV input
Max. Resolution
of TV input
1080p@60F
(Movie Frame : Off)
1080p@60F 1080p@60F
Movie Frame :
Auto (24 Fps)
1080p@24F 1080p@24F
1080i 1080i 1080i
720p 720p 720p
576p/480p 576p/480p 576p/480p
DVD playback
••
Output
Setup
HDMI / connected
HDMI Mode
BD Wise 576i/480i
Auto Max. Resolution of TV input
1080p 1080p
1080i 1080i
720p 720p
576p/480p 576p/480p
NOTES
✎
✎
If the TV you connected to the player does not
`
`
support Movie Frame or the resolution you
selected, the message "If no pictures are shown
after selecting ‘Yes’, please wait for 15 seconds
to return to the previous resolution. " appears. If
you select Yes, the TV’s screen will go blank for
15 seconds, and then the resolution will revert
to the previous resolution automatically.
If the screen stays blank after you have
`
`
changed the resolution, remove all discs,
and then press and hold the ^ button on the
front of the player for more than 5 seconds.
All settings are restored to the factory default.
Follow the steps on the previous page to
access each mode and select the Display Setup
that your TV will support.
When the factory default settings are restored,
`
`
all stored user BD data is deleted.
The Blu-ray Disc must have the 24 frame feature
`
`
for the player to use the Movie Frame (24 Fps)
mode.
Movie Frame (24 Fps)
Setting the Movie Frame (24 Fps) feature to
Auto allows you to adjust the player’s HDMI
output to 24 frames per second for improved
picture quality.
You can enjoy the Movie Frame (24 Fps)
feature only on a TV supporting this frame
rate. You can select Movie Frame only when
the player is in the HDMI 1080p output
resolution modes.
HDMI Colour Format
Lets you set the colour space format for
HDMI output to match the capabilities of the
connected device (TV, monitor, etc).
HDMI Deep Colour
Lets you output video from the HDMI OUT
jack with Deep Colour. Deep Colour provides
more accurate colour reproduction with
greater colour depth.
Progressive Mode
Lets you improve picture quality when viewing
DVDs.
Sound Settings
Digital Output
Lets you select the digital audio output format
that is suitable for your TV or AV Receiver. For
more details, please refer to the Digital Output
Selection table.
11
Page: 11
Digital Output Selection
Setup PCM
Bitstream
(Unprocessed)
Bitstream
(Re-encoded
DTS)
Bitstream
(Re-encoded
Dolby D)
Connection
HDMI
Receiver
Coaxial
HDMI
Receiver
Coaxial
HDMI Receiver or
Coaxial
HDMI supported
AV receiver or
Coaxial
Audio Stream
on Blu-ray
Disc
PCM Up to 7.1ch PCM 2ch PCM PCM 2ch Re-encoded DTS
Re-encoded
Dolby Digital *
Dolby Digital PCM 2ch PCM 2ch Dolby Digital Dolby Digital Re-encoded DTS
Re-encoded
Dolby Digital *
Dolby Digital Plus PCM 2ch PCM 2ch
Dolby Digital
Plus
Dolby Digital Re-encoded DTS
Re-encoded
Dolby Digital *
Dolby TrueHD PCM 2ch PCM 2ch Dolby TrueHD Dolby Digital Re-encoded DTS
Re-encoded
Dolby Digital *
DTS PCM 2ch PCM 2ch DTS DTS Re-encoded DTS
Re-encoded
Dolby Digital *
DTS-HD High
Resolution Audio
PCM 2ch PCM 2ch
DTS-HD High
Resolution
Audio
DTS Re-encoded DTS
Re-encoded
Dolby Digital *
DTS-HD Master
Audio
PCM 2ch PCM 2ch
DTS-HD
Master Audio
DTS Re-encoded DTS
Re-encoded
Dolby Digital *
Audio Stream
on DVD
PCM PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch
Dolby Digital PCM 2ch PCM 2ch Dolby Digital Dolby Digital Dolby Digital Dolby Digital
DTS PCM 2ch PCM 2ch DTS DTS DTS DTS
Definition for
Blu-ray Disc
Any
Decodes main feature
audio and BONUSVIEW
audio stream together
into PCM audio and add
Navigation Sound Effects.
Outputs only main feature
audio stream so that your
AV receiver can decode the
audio bitstream.
You will not hear BONUSVIEW
audio and Navigation Sound
Effects.
Decodes main feature
audio and BONUSVIEW
audio stream together
into PCM audio
and add Navigation
Sound Effects, then
re-encodes the
PCM audio into DTS
bitstream
Decodes main
feature audio and
BONUSVIEW audio
stream together into
PCM audio and add
Navigation Sound
Effects, then re-
encodes the PCM
audio into Dolby
Digital bitstream
If Source Stream is 2ch, "Re-encoded Dolby D" Settings are not applied.
*
*
Blu-ray Discs may include three audio streams :
Main Feature Audio : The audio soundtrack of the main feature.
-
-
BONUSVIEW audio : An additional soundtrack such as the director or actor’s commentary.
-
-
Navigation Sound Effects : When you choose a menu navigation selection, a Navigation
-
-
Sound Effect may sound. Navigation Sound Effects are different on each Blu-ray Disc.
NOTES
✎
✎
Be sure to select the correct Digital Output or
`
`
you will hear no sound or just loud noise.
If the HDMI device (AV receiver, TV) is not
`
`
compatible with compressed formats (Dolby
Digital, DTS), the audio signal outputs as PCM.
Regular DVDs do not have BONUSVIEW audio
`
`
and Navigation Sound Effects.
Some Blu-ray Discs do not have BONUSVIEW
`
`
audio and Navigation Sound Effects.
If you play MPEG audio soundtracks, the audio
`
`
signal outputs as PCM regardless of your
Digital Output selections (PCM or Bitstream).
If your TV is not compatible with compressed
`
`
multi-channel formats (Dolby Digital, DTS), the
player may output PCM 2ch downmixed audio
even though you selected Bitstream (either Re-
encoded or Unprocessed) in the setup menu.
If your TV is not compatible with PCM sampling
`
`
rates over 48kHz, the player may output 48kHz
downsampled PCM audio even though you set
PCM Downsampling to Off.
PCM Downsampling
Lets you choose to have 96KHz PCM signals
downsampled to 48KHz before they are
outputted to an amplifier. Choose On if your
amplifier or receiver is not compatible with a
96KHz signal.
Dynamic Range Control
Lets you apply dynamic range control to
Dolby Digital, Dolby Digital Plus, and Dolby
TrueHD audio.
Auto
•• : Automatically controls the dynamic
range of Dolby TrueHD audio, based
on information in the Dolby TrueHD
soundtrack.
Also turns dynamic range control on for
Dolby Digital and Dolby Digital Plus.
Off
•• : Leaves the dynamic range
uncompressed, letting you hear the original
sound.
On
•• : Turns dynamic range control on for
all three Dolby formats. Quieter sounds
are made louder and the volume of loud
sounds is reduced.
Downmixing Mode
Lets you select the multi-channel downmix
method that is compatible with your stereo
system. You can choose to have the player
downmix to normal stereo or to surround
compatible stereo.
12
Page: 12
Network Settings
Please contact your ISP to find out if your IP
address is static or dynamic. If it is dynamic
- and most are - we recommend using the
Auto procedure for network setup. This is
easiest and will work in the majority of cases.
If it is static, you must use the manual set up
procedure.
Network setup directions start below.
NOTES
✎
✎
This unit can only be connected to a Network
`
`
via a wired connection.
Wired Network Settings
In the Home menu, press the ▲▼◄►
111
buttons to select Settings, and then
press the v button.
Press the ▲▼ buttons to select
222 Network,
and then press the v button.
Press the ▲▼ buttons to select
333 Wired
Network Settings, and then press the
v button. The Wired Network Settings
screen appears.
Picture
Sound
Network
System
Language
Security
General
Support
Settings	
Wired Network Settings
Internet Protocol Setup	 :	Auto	 \
IP Address	 :	 0 0 0 0
Subnet Mask	 :	 0 0 0 0
Gateway	 :	 0 0 0 0
DNS	 :	Auto
DNS Server	 :	 0 0 0 0
> Move " Select ' Return
In the Internet Protocol Setup field, select
444
Auto if it is not selected. (Press v to
select Auto, and then press v.)
Press the ▲▼ buttons to select
555 Manual,
and then press the v button.
Press the ▼ button to go to the first entry
666
field (IP Address).
Use the number buttons on your remote
777
to enter numbers.
When done with each field, use the ►
888
button to move to the next field. You can
also use the other arrow buttons to move
up, down, and back.
Enter the
999 IP Address, Subnet Mask, and
Gateway values in the same way.
Press the ▼ button to go to
1111 DNS.
Press the ▼ button to go to the first DNS
1111
entry field.
Enter the numbers as above.
1111
Press the
1111 RETURN button on your
remote control.
Run a Network Test to ensure the player
1111
has connected to your network.
Network Test
Use this menu item to check whether your
network connection is working or not.
Network Status
Use to check whether a connection to a
network and the Internet has been established.
Device Name
Device Name function allows you to change
player's name by selecting from device name
list.
BD-Live Internet Connection
Set to allow or prohibit an Internet connection
when you use the BD-LIVE service.
Allow (All)
•• : The Internet connection is
allowed for all BD-LIVE contents.
Allow (Valid Only)
•• : The Internet
connection is allowed only for BD-LIVE
contents containing a valid certificate.
Prohibit
•• : No Internet connection is allowed
for any BD-LIVE content.
NOTES
✎
✎
What is a valid certificate?
`
`
When the player uses BD-LIVE to send the
disc data and a request to the server to certify
the disc, the server uses the transmitted data
to check if the disc is valid and sends the
certificate back to the player.
The Internet connection may be restricted
`
`
while you are using BD-LIVE contents.
Using BD-LIVE™
Once the player is connected to the network,
you can enjoy various movie-related service
contents using a BD-LIVE compliant disc.
Attach a USB memory stick to the USB jack
111
on the front of the player, and then check
its remaining memory. The memory device
must have at least 1GB of free space to
accommodate the BD-LIVE services.
Insert a Blu-ray Disc that supports BD-
222
LIVE.
Select an item from various BD-LIVE
333
service contents provided by the disc
manufacturer.
NOTES
✎
✎
The way you use BD-LIVE and the provided
`
`
contents may differ, depending on the disc
manufacturer.
The Auto Function acquires and fills in the
555
values for IP Address, Subnet Mask,
etc., automatically.
NOTES
✎
✎
This process can take up to five minutes.
`
`
After the Network Function has acquired
666
the network values, press the RETURN
button.
Select
777 Network Test, and then press v
to ensure the player has connected to
your network.
When the Network Test is complete, press
888
the RETURN twice to return to the Main
Menu.
If the Network Function does not acquire
999
the network values, go to the directions
for Manual Setup.
Manual Network Setup
Before you start manual network setup, you
need the network setting values.
To get the network setting values, contact
your ISP (Internet Service Provider) or your
network administrator.
To enter the Network Settings into your
player, follow these steps:
In the Home menu, press the ▲▼◄►
111
buttons to select Settings, and then
press the v button.
Press the ▲▼ buttons to select
222 Network,
and then press the v button.
Press the ▲▼ buttons to select
333 Wired
Network Settings, and then press the
v button. The Wired Network Settings
screen appears.
Select the Internet Protocol Setup field,
444
and then press the v button.
13
Page: 13
The DLNA Function
DLNA lets you play music, video, and photo
files located in your PC on the player.
To use DLNA with your player, you must
connect the player to your network.
(See page 13-14).
To use DLNA with your PC, you must install
DLNA software on your PC.
System Settings
Setup
By using the Setup function, you can set the
language, Network Settings, etc.
For more information about the Setup
function, refer to the Initial Settings section of
this user manual (page 10).
Quick Start
You can turn on the power quickly by
decreasing the boot time.
NOTES
✎
✎
If this function is set to
`
` On, Standby power
consumption will be increased.
Anynet+ (HDMI-CEC)
Anynet+ is a convenient function that offers
linked operations with other Samsung players
that have the Anynet+ feature.
To operate this function, connect this player
to an Anynet+ Samsung TV with an HDMI
cable.
With Anynet+ on, you can operate this player
using a Samsung TV remote control and start
disc playback simply by pressing the PLAY
( ) button on the TV’s remote control.
For more information, please see the TV user
manual.
NOTES
✎
✎
This function is not available if the HDMI cable
`
`
does not support CEC.
If your Samsung TV has an Anynet+ logo, then
`
`
it supports the Anynet+ function.
Depending on your TV, certain HDMI output
`
`
resolutions may not work.
Please refer to the user manual of your TV.
If you have Anynet+ turned on, when you
`
`
turn off the product, disconnect, and then
reconnect the power cable, the product turns
on automatically to re-establish the Anynet+
connection. After about 15 seconds, it turns off
again automatically.
Some Samsung TVs, when connected to this
`
`
product using the Anynet+ function will, when
you turn them on, display a warning popup
message saying no connection has been
found. Never-the-less, the Anynet+ connection
is properly established and available to use.
BD Data Management
Enables you to manage the downloaded
contents you accessed through a Blu-ray disc
that supports the BD-LIVE service and stored
on a flash drive.
You can check the device’s information
including the storage size, delete the BD data,
or change the Flash memory device.
NOTES
✎
✎
In the external memory mode, disc playback
`
`
may be stopped if you disconnect the USB
device in the middle of playback.
Your player supports the FAT16, FAT32, and
`
`
NTFS file systems. We recommend you use
USB devices that support USB 2.0 protocol
with 4 MB/sec or faster read/write speed.
The Resume Play function may not work after
`
`
you format the storage device.
The total memory available to BD Data
`
`
Management may differ, depending on the
conditions.
DivX® Video On Demand
View DivX® VOD Registration Codes to
purchase and play DivX® VOD contents.
Language Settings
You can select the language you prefer for
the On-Screen menu, disc menu, audio, and
subtitles.
NOTES
✎
✎
The selected language will only appear if it is
`
`
supported on the disc.
Security Settings
When you access this function for the first
time, the PIN screen appears. Enter the
default PIN - 0000 - using the number
buttons. To change the PIN, use the Change
PIN function. Each time you access the
Security Settings hereafter, you must enter
that four digit PIN. If you don’t change the
PIN, continue using the default PIN.
BD Parental Rating
Prevents playback of Blu-ray Discs with
specific age ratings unless the 4 digit PIN is
entered.
DVD Parental Rating
This function works in conjunction with DVDs
that have been assigned an age rating or
numeric rating that indicates the maturity level
of the content. These numbers help you control
the types of DVDs that your family can watch.
Select the rating level you want to set. 	
For example, if you select Level 6, discs rated
above 6 - Level 7 and 8 - will not play.
A larger number indicates more mature content.
When the DVD Parental Rating function is on,
you must enter the 4 digit PIN to play discs
with restricted rating levels.
Change PIN
Change the 4-digit password used to access
security functions.
To change the PIN, follow these steps:
Select
111 Change PIN, and then press the
v button. The Enter old PIN screen
appears.
Enter the old PIN. If you never changed
222
the PIN, enter the default PIN: 0000. 	
The Enter new PIN screen appears.
Enter the new PIN in the Enter new PIN
333
fields.
Re-enter the new PIN in the Confirm
444
new PIN fields. The "PIN is changed
successfully." message appears.
Press the
555 v button.
If you forget your password
Remove any discs.
111
Press and hold the
222 ^ button on the front
panel for 5 seconds or more.
All settings will revert to the factory settings.
NOTES
✎
✎
When the factory default settings are restored,
`
`
all the user stored BD data will be deleted.
General Settings
Time Zone
Lets you specify the time zone that is
applicable to your area.
14
Page: 14
Support Settings
Software Upgrade
The Software Upgrade menu allows you to
upgrade the player’s software for performance
improvements or additional services.
By Online
To upgrade By Online, follow these steps:
In the player’s menu, go to
111 Settings >
Support > Software Upgrade.
Select
222 By Online, and then press the
v button. The Connecting to Server
message appears.
A popup message will appear if an update
333
is available.
If you select
444 Yes, download process
started. (Never turn the player on during
an upgrade.)
When the update is completed, the player
555
will restart automatically.
NOTES
✎
✎
The upgrade is complete when the player turns
`
`
off, and then turns on again by itself.
Never turn the player off or back on manually
`
`
during the update process.
Samsung Electronics takes no legal
`
`
responsibility for player malfunction caused by
an unstable Internet connection or consumer
negligence during a software upgrade.
No disc should be in the product when you
`
`
upgrade the software By Online.
By USB
To upgrade by USB, follow these steps:
Visit www.samsung.com/bluraysupport.
111
Download the latest USB software
222
upgrade zip archive to your computer.
Unzip the zip archive to your computer.
333
You should have a single RUF file with the
same name as the zip file.
Copy the RUF file to a USB flash drive.
444
Make sure there is no disc in the player,
555
and then insert the USB flash drive into
the USB port of the player.
In the player’s menu, go to
666 Settings >
Support > Software Upgrade.
Select
777 By USB.
NOTES
✎
✎
No disc should be in the product when you
`
`
upgrade the software using the USB Host jack.
When the software upgrade is done, check the
`
`
software details in the software Upgrade menu.
Do not turn off the player during the software
`
`
upgrade. It may cause the player to malfunction.
Software upgrades using the USB Host jack
`
`
must be performed with a USB flash memory
stick only.
Auto Upgrade Notification
If you have connected the player to your
network, and then set Auto Upgrade
Notification on, the player automatically
notifies you when a new software version is
available for the player.
To set Auto Upgrade Notification on, follow
these steps:
Select
111 Auto Upgrade Notification, and
then press the v button.
Use the ▲▼ buttons to select
222 On, and
then press the v button.
If there is a new software version available,
the player notifies you with a popup message.
To upgrade the firmware, select
111 Yes in the
Pop-up. The player turns off automatically,
then restarts, and begins the download.
(Never turn the player on or off manually
during an upgrade.)
The update progress popup appears.
222
When the update is completed, the player
333
will restart automatically.
NOTES
✎
✎
No disc should be in the product when you
`
`
upgrade the software using the USB Host jack.
Never turn the player off or on manually during
`
`
the update process.
Samsung Electronics takes no legal
`
`
responsibility for player malfunction caused by
an unstable Internet connection or consumer
negligence during software upgrade.
Contact Samsung
Provides contact information for assistance
with your player.
Terms of Service Agreement
Lets you view the general disclaimer regarding
third party contents and services.
Reset
Returns all settings to their factory defaults
except for the network settings.
15
Page: 15
Media Play
Playing a Commercially Recorded
Disc
Press the
111 8 button to open the disc tray.
Place a disc gently into the disc tray with
222
the disc's label facing up.
Press the
333 8 button to close the disc tray.
Playback starts automatically.
Playing Files on a USB Device
There are two methods you can use to play or
view multimedia files located on a USB device
through your player.
Method 1
Turn the player on.
111
Connect the USB device to the USB port
222
on the front panel of the player. The New
Device Connected pop-up appears.
App 1 App 2 App 3 App 4	 App 5 App 6 Change Device Settings
Play Disc Photos Videos Music
No Disc
New device connected.
Photos
Videos
Music
123
> Move " Enter ' Return
NOTES
✎
✎
If the pop-up does not appear, go to Method 2.
`
`
Use the ▲▼ buttons to select
333 Photos,
Videos, or Music, and then press the
v button. The Photos, Videos & Music
screen appears listing the content of the
device. Depending on how the contents
is arranged, you will see either folders,
individual files, or both.
NOTES
✎
✎
Even though the player will display folders for
`
`
all content types, it will only display files of
the Content Type you selected in Step 3. For
example, if you selected music, you will only
be able to see music files. You can change this
selection by returning to the Photos, Videos &
Music screen and going to Step 3 in Method 2
below.
If necessary, use the the ▲▼◄► buttons
444
to select a folder, and then press the v
button.
Select a file to view or play, and then
555
press the v button.
Press the
666 RETURN button to exit a folder
or the EXIT button to return to the Home
screen.
Go to pages 17~19 for instructions that
777
explain how to control playback of videos,
music, and pictures on a USB device.
Method 2
Turn the player on.
111
Connect the USB device to the USB port
222
on the front panel of the player. Select
Change Device and then press ▲▼ to
select USB. Press the v button.
App 1 App 2 App 3 App 4	 App 5 App 6 Change Device Settings
Play Disc Photos Videos Music
No Disc
Change Device
No Disc
123
a
Close
Use the ▲▼ ◄► buttons to select
333
Photos, Videos or Music on the
Home screen, and then press the v
button. The Photos, Videos and Music
screen appears listing the content of the
device.
	 Depending on how the contents is
arranged, you will see either folders,
individual files, or both.
NOTES
✎
✎
Even though the player will display folders for
`
`
all content types, it will only display files of
the Content Type you selected in Step 3. For
example, if you selected music, you will only
be able to see music files. You can change this
selection by returning to the Photos, Videos &
Music screen and repeating Step 3.
If necessary, use the ▲▼◄► buttons to
444
select a folder, and then press the v
button.
Use the ▲▼◄► buttons to select a file
555
to view or play, and then press the v
button.
Press the
666 RETURN button to exit a folder
or the EXIT button to return to Home
screen.
Go to pages 17~19 for instructions that
777
explain how to control playback of videos,
music, and pictures on a USB device.
NOTES
✎
✎
If you insert a disc when playing a USB
`
`
device, the device mode changes to "Disc"
automatically.
Playing a Disc with User Recorded
Content
You can play multimedia files you have
recorded on Blu-ray, DVD, or CD discs.
Place a user recorded disc into the disc
111
tray with the disc’s label facing up, and
then close the tray.
Use the ◄► buttons to select the type
222
of content you want to view or play -
Videos, Photos, or Music - and
then press the v button.
NOTES
✎
✎
Even though the player will display folders for
`
`
all content types, it will only display files of
the Content Type you selected in Step 2. For
example, if you selected music, you will only
be able to see music files. You can change this
selection by returning to the Home screen and
repeating Step 2.
A screen appears listing the contents of
333
the disc. Depending on how the contents
are arranged, you will see either folders,
individual files, or both.
If necessary, use the ▲▼◄►buttons to
444
select a folder, and then press the v
button.
Use the ◄►▲▼ buttons to select a file
555
to view or play, and then press the v
button.
16
Page: 16
Press the
666 RETURN button one or more
times to exit a current screen, exit a folder,
or to return to the Home screen. Press the
EXIT button to return directly to the Home
Screen.
Go to pages 17~19 for instructions that
777
explain how to control playback of videos,
music, and pictures on a disc.
Using DLNA
DLNA Connection
PC
Blu-ray Disc Player
Play back PC's
files
Connect the Blu-ray Disc Player, your PC,
111
and/or your DLNA compatible device to
the same wireless network.
Follow the directions in the
222 DLNA software
Installation/Instruction manual to set up
devices and files for playing or viewing.
Select
333 Change Device on the player's
Home screen, and then press the v
button. In the list of DLNA connected
devices that appears, select your PC or
other DLNA compatible device and then
press the v button.
Use the ◄► buttons to select the type
444
of content you want to view or play -
Videos, Photos, or Music - and then
press the v button.
NOTES
✎
✎
Even though the player will display folders for
`
`
all content types, it will only display files of
the Content Type you selected in Step 4. For
example, if you selected music, you will only
be able to see music files. You can change this
selection by returning to the Home screen and
repeating Step 4.
A screen appears listing the contents of
555
the PC or DLNA device. Depending on
how the contents are arranged, you will
see either folders, individual files, or both.
If necessary, use the ▲▼◄►buttons to
666
select a folder, and then press the v
button.
Use the ◄►▲▼ buttons to select a file
777
to view or play, and then press the v
button.
Press the
888 RETURN button one or more
times to exit a current screen, exit a folder,
or to return to the Home screen. Press the
EXIT button to return directly to the Home
Screen.
Go to pages 17~19 for instructions that
999
explain how to control playback of videos,
music, and pictures on a disc.
Controlling Video Playback
You can control the playback of video content
located on a Blu-ray disc, DVD, CD, USB
device, or your computer. Depending on the
media, some of the functions described in
this manual may not be available.
During Blu-ray or DVD disc playback, the Full
screen button does not operate.
Buttons on the Remote Control
used for Video Playback
SCREEN
A-B
VIEW
FULL
BONUS REPEAT REPEAT
AUDIO HOME SUBTITLE
1
2
	 Playback related buttons
The player does not play sound in Search,
Slow or Step mode.
To return to normal speed playback, press
••
the 6 button.
6 button Starts playback.
5 button Stops playback.
7 button Pauses playback.
Fast Motion
Play
During playback, press the 3 or
4 button.
Each time you press the 3 or
4 button, the playback speed will
change.
Slow Motion
Play
In pause mode,press the 4 button.
Each time you press the 4 button,
the playback speed will change.
Step Motion
Play
In pause mode, press the 7
button.
Each time you press the 7 button,
a new frame appears.
Skip Motion
Play
During playback, press the 1 or
2 button.
Each time you press the 1 or
2 button, the disc moves to the
previous or next chapter or file.
	 Using the disc menu, title menu,
popup menu, and title list
DISC MENU
button
During playback, press this button
to start the disc menu function.
TITLE MENU
button
During playback, press this button
to start the title menu function.
POPUP MENU
button
During playback, press this button
to start the popup menu function.
Controlling Music Playback
You can control the playback of music located
on a Blu-ray disc, DVD, CD, USB device, or
your computer.
Buttons on the Remote Control
used for Music Playback
SCREEN
A-B
VIEW
FULL
BONUS REPEAT REPEAT
AUDIO HOME SUBTITLE
1
4
6
3
2
5
1
NUMBER buttons (Audio CD (CD-DA) only) :
During Playlist playback, press the desired
track number.
The selected track is played.
2
Skip : During playback, press the 1 or 2
button to move to the previous or next file of
the playlist.
3 5 button : Stops a track.
17
Page: 17
4
Fast Play (Audio CD (CD-DA) only)
During playback, press the 3 or 4
button.
Each time you press the 3 or 4 button,
the playback speed will change.
5 Pause : Pauses a track.
6
6 button : Plays the currently selected
track.
Repeat an Audio CD (CD-DA)/
MP3
During Playlist playback, press the
111
TOOLS button.
	 " Pause c Select Tools ' Return
+ 00:08 / 05:57
1/6
TRACK 001
05:57
TRACK 002
04:27
TRACK 003
04:07
TRACK 004
03:41
TRACK 005
03:17
TRACK 006
03:35
Playlist
TRACK 001
CD
Tools
Repeat Mode	 ?	 Off	 \
Rip
> Move < Adjust ' Return
Press the ◄► buttons to select
222 Track,
All, Shuffle, or Off.
Press the
333 v button.
	 Off
Songs are played in the order
in which they were recorded.
( )	 Track The current song is repeated.
( )	 All All songs are repeated.
( )	Shuffle
Shuffle plays songs in random
order.
Playlist
To move to the Music List, press the
111 5
or RETURN button.
The Music List screen appears.
	 c Select Tools () Jump to Page ' Return
1/2 Page
Music TRACK 001
TRACK 001
02:38
TRACK 003
02:38
TRACK 005
02:38
TRACK 007
02:38
TRACK 009
02:38
TRACK 004
02:38
TRACK 002
02:38
TRACK 006
02:38
TRACK 008
02:38
TRACK 010
02:38
CD a Change Device
Press the ▲▼◄► buttons to move to a
222
desired track, and then press the YELLOW
(C) button. A check appears on the track.
Repeat this procedure to select additional
tracks.
To remove a track from the list, move to
333
the track, and then press the YELLOW (C)
button again.
The check on the track is cancelled.
When done, press the
444 v button.
The tracks you selected are displayed on
the right side of the screen. The player
plays the first track.
To change the play list, press the
555  button
or RETURN button to return to the Music
List. Repeat Steps 2, 3, and 4.
To cancel the play list and return to the
666
Home screen, press the RETURN or EXIT
button.
NOTES
✎
✎
You can create a playlist with up to 99 tracks
`
`
on Audio CDs (CD-DA).
If you remove all the tracks from a play list and
`
`
then press the v button, the player lists and
plays all the tracks on the disc.
Ripping
Lets you copy audio files contents from an
Audio CD (CD-DA) to USB/HDD device.
Open the disc tray. Place the audio
111 (CD-
DA) disc on the tray, and close the tray.
Insert a USB device into the USB jack on
the front of the product.
In Stop mode, press the ▲▼◄► buttons
222
to move to a desired track, and then press
the YELLOW (C) button. A check appears
on the track.
Repeat this procedure to select additional
tracks.
To remove a track from the list, move to
333
the track, and then press the YELLOW (C)
button again.
The check on the track is cancelled.
When done, press the
444 TOOLS button,
and then select Rip using the ▲▼
buttons, and then press the v button.
The Rip pop-up appears.
Use the ▲▼ buttons to select the device
555
to store the ripped files, and then press
the v button.
NOTES
✎
✎
Do not disconnect the device while ripping is in
`
`
progress.
If you want to cancel ripping, press the
666
v button and then select Yes. Select
No to continue ripping.
When ripping is complete, the "
777 Ripping
completed." message appears. Press the
v button to go back to the Playback
screen.
NOTES
✎
✎
This function may not be supported by some
`
`
discs.
On the Ripping screen, you can also choose
`
`
Select All and Deselect All.
Use
-
- Select All to select all tracks. This
cancels your individual track selections.
Use
-
- Deselect All to deselect all selected
tracks at once.
Disc Copy to USB
Lets you copy video/photo/music contents
from data Disc to USB/HDD device.
Open the disc tray. Place the disc on
111
the tray, and close the tray. Insert a USB
device into the USB jack on the front
of the product. The new device pop-up
appears.
Press the ▲ button, and then press the
222
◄► to select Blu-ray, DVD or CD.
Use the ▲▼ buttons to select
333 Photos,
Videos, Music, and then press the v
button. The Photos, Videos & Music
screen appears listing the content of the
device. Depending on how the contents
is arranged, you will see either folders,
individual files, or both.
NOTES
✎
✎
Even though the player will display folders for
`
`
all content types, it will only display files of
the Content Type you selected in Step 3. For
example, if you selected music, you will only
be able to see music files. You can change this
selection by returning to the Photos, Videos &
Music screen and repeating Step 3.
In Stop mode, use the ▲▼ ◄► buttons to
444
select the Videos, Photos or Music,
and then press the YELLOW (C) button.
A check appears to the left of the desired
item.
18
Page: 18
Repeat Step 4 to select and check
555
additional desired item.
To remove the desired item from the list,
666
press the YELLOW (C) button again.
The check on the desired item is removed.
When done, press the
777 TOOLS button,
and then select the Copy to USB using
the ▲▼ buttons, and then press the v
button. The Copy to USB pop-up appears.
Use the ▲▼ buttons to select the device
888
to store the copied files to, and then press
the v button.
NOTES
✎
✎
Do not disconnect the device while copying is
`
`
in progress.
If you want to cancel copying, press the
999
v button and then select Yes. Select
No to continue copying.
When ripping is complete, the "
1111 Copying
completed." message appears. Press the
v button to go back to the Playback
screen.
NOTES
✎
✎
This function may not be supported by some
`
`
discs.
On the Copying screen, you can also choose
`
`
Select All and Deselect All.
Use
-
- Select All to select all tracks. This
cancels your individual track selections.
Use
-
- Deselect All to deselect all selected
tracks at once.
Appendix
Troubleshooting
Before requesting service, please try the following solutions.
PROBLEM SOLUTION
No operation can be
performed with the remote
control.
Check the batteries in the remote control. They may need replacing.
••
Operate the remote control at a distance of no more than 6.1m from the
••
player.
Remove batteries and hold down one or more buttons for several minutes
••
to drain the microprocessor inside the remote control to reset it. Reinstall
batteries and try to operate the remote control again.
Disc does not play. Ensure that the disc is installed with the label side facing up.
••
Check the region number of the Blu-ray Disc/DVD.
••
Disc Menu does not appear. Ensure that the disc has disc menus.
••
The prohibition message
appears on the screen.
This message appears when an invalid button is pressed.
••
The Blu-ray Disc/DVD’s software doesn’t support the feature (e.g., angles).
••
You’ve requested a title or chapter number or search time that is out of range.
••
Play mode differs from the
Setup Menu selection.
Some of the functions selected in the Setup Menu may not work properly if
••
the disc is not encoded with the corresponding function.
The screen ratio cannot be
changed.
The Screen Ratio is fixed on your Blu-ray Disc/DVD.
••
This is not a problem with the player.
••
No audio. Make sure you have selected the correct Digital Output in the Audio Options
••
Menu.
The screen is blank. If the HDMI output is set to a resolution your TV cannot support (for example,
••
1080p), you may not see a picture on your TV.
Press the
•• ^ button (on front panel) for more than 5 seconds with no disc
inside. All settings will revert to the factory settings.
When the factory default settings are restored, all stored user BD data is
••
deleted.
Playing Photo Contents
You can control the playback of photo content
located on a Blu-ray disc, DVD, CD, USB
device, or your computer.
Using the Tools Menu
During playback, press the TOOLS button.
Start Slide Show/
Stop Slide Show
Select to start or stop the slide
show.
Slide Show Speed Select to set a slide show's speed.
Background
Music
Select to listen to music while
viewing a slide show.
Zoom
Select to enlarge the current
picture. (Enlarge up to 4 times)
Rotate
Select to rotate the picture. (This
will rotate the picture either
clockwise or counter clockwise.)
Information Shows the picture information.
NOTES
✎
✎
Depending on the disc or storage device, the
`
`
Tools menu may differ.
To enable the background music function, the
`
`
photo file must be in the same storage media
as the music file.
However, the sound quality can be affected
by the bit rate of the MP3 file, the size of the
photo, and the encoding method.
You can't enlarge the subtitle and PG graphic
`
`
in the full screen mode.
19
Page: 19
PROBLEM SOLUTION
Forgot password Press the
•• ^ button (on front panel) for more than 5 seconds with no disc
inside. All settings including the password will revert to the factory settings.
Don’t use this unless absolutely necessary.
When the factory default settings are restored, all stored user BD data is
••
deleted.
The picture is noisy or
distorted
Make sure that the disc is not dirty or scratched.
••
Clean the disc.
••
No HDMI output. Check the connection between the TV and the HDMI jack of the player.
••
Check if your TV supports 576p/480p, 720p, 1080i, or 1080p HDMI input
••
resolutions.
Abnormal HDMI output
screen.
If random noise appears on the screen, it means that TV does not support
••
HDCP (High-bandwidth Digital Content Protection).
If you experience other
problems.
Go to the contents and find the section of the user manual that contains the
••
explanations regarding the current problem, and follow the procedure once
again.
If the problem still cannot be solved, please contact your nearest Samsung
••
authorised service centre.
DLNA function
I can see folders shared
through DLNA, but I cannot
see the files.
DLNA
•• shows only files corresponding to the Image, Music, and Movie
categories. Files that do not correspond to these categories are not
displayed.
Video is played intermittently. Check if the network is stable.
••
Check if the network cable is properly connected and if the network is
••
overloaded.
DLNA connection between
Player and PC is unstable.
The IP address under the same subnetwork should be unique. If they are
••
not, IP interference can cause this phenomenon.
Check if you have a firewall enabled.
••
If so, disable the firewall function.
PROBLEM SOLUTION
BD-LIVE
I cannot connect to the BD-
LIVE server.
Check whether the network connection is working or not by using the
••
Network Status menu.
Check whether the USB memory device is connected to the player.
••
The memory device must have at least 1GB of free space to accommodate
••
the BD-LIVE service.
You can check the available size in BD Data Management.
Check whether the BD-LIVE Internet Connection menu is set to Allow(All).
••
If all above fails, contact the contents provider or update the player to the
••
latest firmware.
When using the BD-LIVE
service, an error occurs.
The memory device must have at least 1GB of free space to accommodate
••
the BD-LIVE service.
You can check the available size in BD Data Management.
NOTES
✎
✎
When the factory default settings are restored, all stored user BD data is deleted.
`
`
Repairs
If you contact us to repair your player, an administration fee may be charged if either:
An engineer is called out to your home at your request and there is no defect in the
111
product.
You bring the unit to a repair centre and there is no defect in the product.
222
We will provide you with the amount of the administration fee before we make a home visit or
begin any work on your player.
We recommend you read this manually thoroughly, search for a solution on line at www.
samsung.com, or contact Samsung Customer Care before seeking to repair your player.
20
Page: 20
Specifications
General
Weight 1.0 Kg
Dimensions 290 (W) X 221 (D) X 39 (H) mm
Operating Temperature Range +5°C to +35°C
Operating Humidity Range 10 % to 75 %
USB
Type A USB 2.0
DC output 5V 0.5A Max.
HDMI
Video
2D : 1080p, 1080i, 720p, 576p/480p
3D : 1080p, 720p
Audio PCM, Bitstream
Audio Output Digital Audio Output Coaxial
Network Ethernet 100BASE - TX Terminal
Network speeds equal to or below 10Mbps are not supported.
-
-
Design and specifications are subject to change without prior notice.
-
-
For the power supply and power consumption, refer to the label attached to the player.
-
-
Weight and dimensions are approximate.
-
-
Compliance and Compatibility Notice
NOT ALL discs are compatible
Subject to the restrictions described below and those noted throughout this Manual,
••
including the Disc Type and Characteristics section of this user manual, disc types that can
be played are: pre-recorded commercial BD-ROM, DVD-VIDEO, and Audio CD (CD-DA)
discs; BD-RE/-R, DVD-RW/-R discs; and CD-RW/-R discs.
Discs other than those listed above cannot be and are not intended to be played by this
••
player. Some of the discs listed above may not play due to one or more reasons provided
below.
Samsung cannot assure that this player will play every disc bearing the BD-ROM, BD-RE/-R,
••
DVD-VIDEO, DVD-RW/-R, DVD+RW/+R and CD-RW/-R logos, and this player may not
respond to all operating commands or operate all features of every disc. These and other
disc compatibility and player operation issues with new and existing format discs are
possible because:
Blu-ray is a new and evolving format and this player may not operate all features of Blu-
-
-
ray Discs because some features may be optional, additional features may have been
added to the Blu-ray Disc format after the production of this player, and certain available
features may be subject to delayed availability;
not all new and existing disc format versions are supported by this player;
-
-
new and existing disc formats may be revised, changed, updated, improved and/or
-
-
supplemented;
some discs are produced in a manner that allows specific or limited operation or restricts
-
-
features during playback;
some discs bearing the BD-ROM, BD-RE/-R, DVD-VIDEO, DVD-RW/-R, DVD+RW/+R
-
-
and CD-RW/-R logos may still be non-standardized discs;
some discs may not be played depending on their physical state or recording conditions;
-
-
problems and errors can occur during the creation of Blu-ray Disc or DVD software and/or
-
-
the manufacture of discs;
this player operates differently than a standard DVD player or other AV equipment; and/or
-
-
for reasons noted throughout this user manual and for other reason(s) discovered and
-
-
posted by SAMSUNG customer care centre.
If you encounter disc compatibility or player operation problems, please contact SAMSUNG
••
customer care centre.
You may also contact SAMSUNG customer care centre for possible updates on this player.
For additional information on playback restrictions and disc compatibility, refer to the
••
Precautions, Before Reading the user manual, Disc Types and Characteristics, and Before
Playing sections of this user manual.
21
Page: 21
For Blu-ray Disc Player progressive scan output
•• : CONSUMERS SHOULD NOTE THAT
NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS
product AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF
PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER
SWITCH THE CONNECTION TO THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE
QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS product, PLEASE
CONTACT OUR CUSTOMER SERVICE CENTER.
Copy Protection
Because AACS (Advanced Access Content System) is approved as the content protection
••
system for the Blu-ray Disc format, similar to use of CSS (Content Scramble System) for the
DVD format, certain restrictions are imposed on playback, analogue signal output, etc., of
AACS protected contents.
The operation of this product and restrictions on this product may vary depending on your
time of purchase as those restrictions may be adopted and/or changed by AACS after the
production of this product. Furthermore, BD-ROM Mark and BD+ are additionally used as
content protection systems for the Blu-ray Disc format, which imposes certain restrictions
including playback restrictions for BD-ROM Mark and/or BD+ protected contents. To obtain
additional information on AACS, BD-ROM Mark, BD+, or this product, please contact
SAMSUNG customer care centre.
Many Blu-ray Disc/DVDs are encoded with copy protection. Because of this, you should
••
only connect your Player directly to your TV, not to a VCR. Connecting to a VCR results in a
distorted picture from copy-protected Blu-ray Disc/DVDs.
Under the U.S. Copyright laws and Copyright laws of other countries, unauthorised
••
recording, use, display, distribution, or revision of television programs, videotapes, Blu-ray
Discs, DVDs, and other materials may subject you to civil and/or criminal liability.
Cinavia Notice
•• : This product uses Cinavia technology to limit the use of unauthorised
copies of some commercially-produced film and videos and their soundtracks. When
a prohibited use of an unauthorised copy is detected, a message will be displayed and
playback or copying will be interrupted. More information about Cinavia technology is
provided at the Cinavia Online Consumer Information Centre at http://www.cinavia.com.
To request additional information about Cinavia by mail, send a postcard with your mailing
address to: Cinavia Consumer Information Centre, P.O. Box 86851, San Diego CA, 92138,
USA.
This product incorporates proprietary technology under licence from Verance Corporation
and is protected by U.S. Patent 7,369,677 and other U.S. and worldwide patents issued
and pending as well as copyright and trade secret protection for certain aspects of such
technology. Cinavia is a trademark of Verance Corporation. Copyright 2004-2013 Verance
Corporation. All rights reserved by Verance. Reverse engineering or disassembly is
prohibited.
Network Service Disclaimer
All content and services accessible through this device belong to third parties and are
protected by copyright, patent, trademark and/or other intellectual property laws. Such
content and services are provided solely for your personal noncommercial use. You may not
use any content or services in a manner that has not been authorised by the content owner or
service provider. Without limiting the foregoing, unless expressly authorised by the applicable
content owner or service provider, you may not modify, copy, republish, upload, post, transmit,
translate, sell, create derivative works, exploit, or distribute in any manner or medium any
content or services displayed through this device.
THIRD PARTY CONTENT AND SERVICES ARE PROVIDED "AS IS." SAMSUNG DOES NOT
WARRANT CONTENT OR SERVICES SO PROVIDED, EITHER EXPRESSLY OR IMPLIEDLY,
FOR ANY PURPOSE. SAMSUNG EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES,
INCLUDING BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE. SAMSUNG DOES NOT GUARANTEE THE ACCURACY, VALIDITY,
TIMELINESS, LEGALITY, OR COMPLETENESS OF ANY CONTENT OR SERVICE MADE
AVAILABLE THROUGH THIS DEVICE AND UNDER NO CIRCUMSTANCES, INCLUDING
NEGLIGENCE, SHALL SAMSUNG BE LIABLE, WHETHER IN CONTRACT OR TORT,
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES,
ATTORNEY FEES, EXPENSES, OR ANY OTHER DAMAGES ARISING OUT OF, OR IN
CONNECTION WITH, ANY INFORMATION CONTAINED IN, OR AS A RESULT OF THE USE
OF ANY CONTENT OR SERVICE BY YOU OR ANY THIRD PARTY, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
Third party services may be terminated or interrupted at any time, and Samsung makes no
representation or warranty that any content or service will remain available for any period
of time. Content and services are transmitted by third parties by means of networks and
transmission facilities over which Samsung has no control. Without limiting the generality of
this disclaimer, Samsung expressly disclaims any responsibility or liability for any interruption or
suspension of any content or service made available through this device.
Samsung is neither responsible nor liable for customer service related to the content and
services. Any question or request for service relating to the content or services should be made
directly to the respective content and service providers.
Page: 22
Licence
Manufactured under licence from Dolby Laboratories. Dolby and the
••
double-D symbol are trademarks of Dolby Laboratories.
For DTS patents, see http://patents.dts.com. Manufactured under licence
••
from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol
together are registered trademarks, and DTS 2.0+Digital Out is a trademark
of DTS, Inc. © DTS, Inc. All Rights Reserved.
DivX
••
ABOUT DIVX VIDEO: DivX
-
- ©
is a digital video format created by DivX,
LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified®
device that has passed rigorous testing to verify that is plays DivX
video. Visit divx.com for more information and software tools to convert your files into DivX
videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified
-
- ®
device must be registered in
order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration
code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for
more information on how to complete your registration.
DivX Certified
-
- ®
to play DivX®
video up to HD 1080p, including premium content.
DivX®
, DivX Certified®
and associated logos are trademarks of Rovi Corporation or its
subsidiaries and are used under licence.
Covered by one or more of the following U.S. patents : 7,295,673; 7,460,668; 7,515,710;
7,519,274.
The terms HDMI and HDMI High-Definition Multimedia Interface, and
••
the HDMI Logo are trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other countries.
Oracle and Java are registered trademarks of Oracle and/or its affiliates.
••
Other names may be trademarks of their respective owners.
Open Source Licence Notice
••
In the case of using open source software, Open Source Licences are available on the
-
-
product menu.
Blu-ray Disc™, Blu-ray™ and the logos are trademarks of the Blu-ray Disc Association.
••
DLNA
•• ®
, the DLNA Logo and DLNA CERTIFIED®
are trademarks, service
marks, or certification marks of the Digital Living Network Alliance.
2.0+Digital Out
Page: 23
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the
SAMSUNG customer care centre.
Correct disposal of batteries in this product
(Applicable in the European Union and other European countries with separate
battery return systems.)
This marking on the battery, manual or packaging indicates that the batteries in this
product should not be disposed of with other household waste at the end of their
working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the
battery contains mercury, cadmium or lead above the reference levels in EC
Directive 2006/66.
If batteries are not properly disposed of, these substances can cause harm to
human health or the environment.
To protect natural resources and to promote material reuse, please separate
batteries from other types of waste and recycle them through your local, free
battery return system.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate
collection systems)
This marking on the product, accessories or literature indicates that the product
and its electronic accessories (e.g. charger, headset, USB cable) should not be
disposed of with other household waste at the end of their working life.
To prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate these items from other types of waste and recycle
them responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this
product, or their local government office, for details of where and how they can
take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of
the purchase contract.
This product and its electronic accessories should not be mixed with other
commercial wastes for disposal.
Area Contact Centre  Web Site
AUSTRIA 0800 - SAMSUNG (0800 - 7267864) www.samsung.com/at/support
BELGIUM 02-201-24-18
www.samsung.com/be/support (Dutch)
www.samsung.com/be_fr/support (French)
BOSNIA 051 331 999 www.samsung.com/support
BULGARIA 07001 33 11 , sharing cost www.samsung.com/bg/support
CROATIA 062 726 786 www.samsung.com/hr/support
CZECH 800 - SAMSUNG (800-726786) www.samsung.com/cz/support
DENMARK 70 70 19 70 www.samsung.com/dk/support
FINLAND 030-6227 515 www.samsung.com/fi/support
FRANCE 01 48 63 00 00 www.samsung.com/fr/support
GERMANY
0180 6 SAMSUNG bzw.
0180 6 7267864*
(*0,20 €/Anruf aus dem dt. Festnetz, aus dem Mobilfunk max. 0,60 €/Anruf)
www.samsung.com/de/support
CYPRUS 8009 4000 only from landline, toll free
www.samsung.com/gr/support
GREECE
80111-SAMSUNG (80111 726 7864) only from land line
(+30) 210 6897691 from mobile and land line
HUNGARY
0680SAMSUNG (0680-726-786)
0680PREMIUM (0680-773-648)
http://www.samsung.com/hu/support
ITALIA 800-SAMSUNG (800.7267864) www.samsung.com/it/support
LUXEMBURG 261 03 710 www.samsung.com/support
MONTENEGRO 020 405 888 www.samsung.com/support
SLOVENIA
080 697 267
090 726 786
www.samsung.com/si/support
NETHERLANDS 0900-SAMSUNG (0900-7267864) (€ 0,10/Min) www.samsung.com/nl/support
NORWAY 815 56480 www.samsung.com/no/support
POLAND
0 801-172-678* lub +48 22 607-93-33 **
*(całkowity koszt połączenia jak za 1 impuls według taryfy operatora)
** (koszt połączenia według taryfy operatora)
www.samsung.com/pl/support
PORTUGAL 808 20 7267 www.samsung.com/pt/support
ROMANIA
08008 SAMSUNG (08008 726 7864)
TOLL FREE No.
www.samsung.com/ro/support
SERBIA 011 321 6899 www.samsung.com/rs/support
SLOVAKIA 0800 - SAMSUNG(0800-726 786) www.samsung.com/sk/support
SPAIN 0034902172678 www.samsung.com/es/support
SWEDEN 0771 726 7864 (SAMSUNG) www.samsung.com/se/support
SWITZERLAND 0848 726 78 64 (0848-SAMSUNG)
www.samsung.com/ch/support (German)
www.samsung.com/ch_fr/support (French)
U.K 0330 SAMSUNG (7267864) www.samsung.com/uk/support
EIRE 0818 717100 www.samsung.com/ie/support
LITHUANIA 8-800-77777 www.samsung.com/lt/support
LATVIA 8000-7267 www.samsung.com/lv/support
ESTONIA 800-7267 www.samsung.com/ee/support

Question & answers

There are no questions about the Samsung BD-J5500 yet.

Ask a question about the Samsung BD-J5500

Have a question about the Samsung BD-J5500 but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Samsung BD-J5500. Please make sure that you describe your difficulty with the Samsung BD-J5500 as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.