Samsung BD-F6500 manual

View a manual of the Samsung BD-F6500 below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Samsung
  • Product: Blu-ray player
  • Model/name: BD-F6500
  • Filetype: PDF
  • Available languages: English, Swedish, Danish, Norwegian, Finnish, German

Table of Contents

Page: 0
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service,
please register your product at
www.samsung.com/register
Blu-ray™ Disc Player
user manual
BD-F6500
Page: 1
Safety Information
| 2 English
Do not install this equipment in a confined space
such as a bookcase or similar unit.
WARNING
To prevent damage which may result in fire
or electric shock hazard, do not expose this
appliance to rain or moisture.
CAUTION
Blu-ray Disc Player USES AN INVISIBLE LASER
BEAM WHICH CAN CAUSE HAZARDOUS
RADIATION EXPOSURE IF DIRECTED. BE SURE
TO OPERATE Blu-ray Disc Player CORRECTLY
AS INSTRUCTED.
CAUTION
THIS PRODUCT UTILIZES A LASER. USE
OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY RESULT
IN HAZARDOUS RADIATION EXPOSURE. DO
NOT OPEN COVERS AND DO NOT REPAIR
YOURSELF. REFER SERVICING TO QUALIFIED
PERSONNEL.
This product satisfies CE regulations when
shielded cables and connectors are used to
connect the unit to other equipment. To prevent
electromagnetic interference with electric
appliances, such as radios and televisions, use
shielded cables and connectors for connections.
Warning
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates "dangerous voltage"
inside the product that presents a risk of
electric shock or personal injury.
CAUTION:TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol indicates important instructions
accompanying the product.
IMPORTANT NOTE
The mains lead on this equipment is supplied with
a molded plug incorporating a fuse. The value of
the fuse is indicated on the pin face of the plug.
If it requires replacing, a fuse approved to BS1362
of the same rating must be used.
Never use the plug with the fuse cover omitted
if the cover is detachable. If a replacement fuse
cover is required, it must be of the same colour as
the pin face of the plug. Replacement covers are
available from your dealer.
If the fitted plug is not suitable for the power points
in your house or the cable is not long enough to
reach a power point, you should obtain a suitable
safety approved extension lead or consult your
dealer for assistance.
However, if there is no alternative to cutting off the
plug, remove the fuse and then safely dispose of
the plug. Do not connect the plug to a mains jack,
as there is a risk of shock hazard from the bared
flexible cord.
To disconnect the apparatus from the mains, the
plug must be pulled out from the mains socket,
therefore the mains plug shall be readily operable.
The product unit accompanying this user manual
is licenced under certain intellectual property rights
of certain third parties.
Page: 2
01
Safety
Information
CLASS 1 LASER PRODUCT
This Compact Disc player is classified as a CLASS
1 LASER product. Use of controls, adjustments
or performance of procedures other than those
specified herein may result in hazardous radiation
exposure.
CAUTION :
•	CLASS 3B VISIBLE AND INVISIBLE LASER
RADIATION WHEN OPEN. AVOID EXPOSURE
TO THE BEAM. (IEC 60825-1)
•	THIS product UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS
OR PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE. DO NOT OPEN COVER AND DO
NOT REPAIR YOURSELF. REFER SERVICING
TO QUALIFIED PERSONNEL.
CLASS 1	 LASER PRODUCT
KLASSE 1	 LASER PRODUKT
LUOKAN 1	 LASER LAITE
KLASS 1 	 LASER APPARAT
PRODUCTO	 LÁSER CLASE 1
Precautions
Important Safety Instructions
Read these operating instructions carefully before
using the unit. Follow all the safety instructions
listed below.
Keep these operating instructions handy for future
reference.
1.	 Read these instructions.
2.	 Keep these instructions.
3.	 Heed all warnings.
4.	 Follow all instructions.
5.	 Do not use this apparatus near water.
6.	 Clean only with a dry cloth.
7.	 Do not block any ventilation openings. Install
in accordance with the manufacturer's
instructions.
8.	 Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including AV receivers) that
produce heat.
9.	 Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade
or the third prong are provided for your safety.
If the provided plug does not fit into your
outlet, consult an electrician for replacement
of the obsolete outlet.
10.	 Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where it exits the
apparatus.
11.	 Only use attachments/accessories specified
by the manufacturer.
12.	 Use only with the cart,
stand, tripod, bracket,
or table specified by the
manufacturer, or sold with
the apparatus. When a cart
is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
13.	 Unplug this apparatus during lightning storms
or when unused for long periods of time.
14.	 Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way,
such as when the power-supply cord or plug
is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does
not operate normally, or has been dropped.
English 3 |
Page: 3
Safety Information
Disc Storage & Management
•	Holding Discs
-
- Fingerprints or scratches on
a disc may reduce sound and
picture quality or cause skipping.
-
- Avoid touching the surface of a disc where
data has been recorded.
-
- Hold the disc by the edges so that fingerprints
will not get on the surface.
-
- Do not stick paper or tape on the disc.
•	Cleaning Discs
-
- If you get fingerprints or dirt on a
disc, clean it with a mild detergent
diluted in water and wipe with a
soft cloth.
-
- When cleaning, wipe gently from the inside to
the outside of the disc.
•	Disc Storage
`
` Do not keep in direct sunlight.
`
` Keep in a cool ventilated area.
`
` Keep in a clean protection jacket and store
vertically.
Handling Cautions
•	Do not expose this apparatus to dripping or
splashing. Do not put objects filled with liquids,
such as vases on the apparatus.
•	To turn this apparatus off completely, you must
pull the power plug out of the wall socket.
Consequently, the power plug must be easily
and readily accessible at all times.
•	Do not plug multiple electric devices into the
same wall socket. Overloading a socket can
cause it to overheat, resulting in a fire.
•	Before connecting other components to this
player, be sure to turn them off.
•	If you move your player suddenly from a cold
place to a warm place, condensation may occur
on the operating parts and lens and cause
abnormal disc playback. If this occurs, unplug
the player, wait for two hours, and then connect
the plug to the power outlet.
Then, insert the disc, and try to play back again.
•	If the product makes an abnormal noise or
produces a burning smell or smoke, turn off
the power switch immediately and disconnect
the power plug from the wall outlet. Then,
contact the nearest customer service centre for
technical assistance. Do not use the product.
Using the product as it is may cause a fire or an
electric shock.
Using the 3D function
IMPORTANT HEALTH AND SAFETY
INFORMATION FOR 3D PICTURES.
Read and understand the following safety
information before using the 3D function.
•	Some viewers may experience discomfort while
viewing 3D TV such as dizziness, nausea, and
headaches.
If you experience any such symptom, stop
viewing 3D TV, remove the 3D Active Glasses,
and rest.
•	Watching 3D images for an extended period of
time may cause eye strain. If you feel eye strain,
stop viewing 3D TV, remove your 3D Active
Glasses, and rest.
•	A responsible adult should frequently check on
children who are using the 3D function.
If there are any reports of tired eyes, headaches,
dizziness, or nausea, have the child stop viewing
3D TV and rest.
•	Do not use the 3D Active Glasses for other
purposes (Such as general eyeglasses,
sunglasses, protective goggles, etc.).
| 4 English
Page: 4
01
Safety
Information
•	Do not use the 3D function or 3D Active Glasses
while walking or moving around. Using the 3D
function or 3D Active Glasses while moving
around may cause you to bump into objects,
trip, and/or fall, and cause serious injury.
•	If you want to enjoy 3D content, connect a 3D
device (3D compliant AV receiver or TV) to the
player's HDMI OUT port using a high-speed
HDMI cable. Put on 3D glasses before playing
the 3D content.
•	The player outputs 3D signals only through
HDMI cable connected to the HDMI OUT port.
•	As the video resolution in 3D play mode is fixed
according to the resolution of the original 3D
video, you can not change the resolution to your
preference.
•	Some functions such as BD Wise, screen size
adjustment, and resolution adjustment may not
operate properly in 3D play mode.
•	You must use a high-speed HDMI cable for
proper output of the 3D signal.
•	Stay at least three times the width of the screen
from the TV when watching 3D images. For
example, if you have a 46-inch screen, stay 138
inches (11.5 feet) from the screen.
•	Place the 3D video screen at eye level for the
best 3D picture.
•	When the player is connected to some 3D
devices, the 3D effect may not function properly.
•	This player does not convert 2D content into
3D.
•	"Blu-ray 3D" and "Blu-ray 3D" logo are
trademarks of the Blu-ray Disc Association.
Copyright
© 2013 Samsung Electronics Co.,Ltd.
All rights reserved; No part or whole of this user's
manual may be reproduced or copied without the
prior written permission of Samsung Electronics
Co.,Ltd.
English 5 |
Page: 5
Contents
| 6 English
Safety Information
2	 Warning
3	 Precautions
3	 Important Safety Instructions
4	 Disc Storage & Management
4	 Handling Cautions
4	 Using the 3D function
5	 Copyright
Getting Started
8	 Disc and Format Compatibility
8	 Disc types and contents your player can
play
8	 Disc types your player cannot play
9	 Region Code
9	 Logos of Discs the player can play
10	 Supported Formats
13	 Accessories
14	 Front Panel
14	 Rear Panel
15	 Remote Control
15	 Tour of the Remote Control
Connections
16	 Connecting to a TV
17	 Connecting to an Audio System
17	 Method 1 Connecting to an HDMI
supported AV receiver
17	 Method 2 Connecting to an AV receiver
with Dolby Digital or DTS decoder
18	 Connecting to a Network Router
18	 Wired Network
18	 Wireless Network
Settings
19	 The Initial Settings Procedure
19	 The Home Screen
20	 Accessing the Settings Screen
20	 Buttons on the Remote Control Used for
the Settings Menu
21	 Settings Menu Functions
27	 Networks and the Internet
27	 Configuring Your Network Connection
30	 Wi-Fi Direct
31	 Upgrading Software
31	 Update Now
32	 Auto Update
Media Play
33	 The AllShare Play Screen
33	 Accessing the AllShare Play Screen
33	 Playing Commercial Discs
33	 Playing Files on a USB Device
34	 Playing a Disc with User Recorded
Content
35	 Using the Allshare Network Function
35	 To Download the Allshare Software
36	 Playing Content Located on Your PC or
Allshare Device through the Blu-ray Disc
Player
36	 Controlling the Playback of Content
Located on Your PC with Your Smart
Phone
37	 Controlling Video Playback
37	 Buttons on the Remote Control used for
Video Playback
37	 Using the Tools Menu
39	 Using the View & Options Menus
Page: 6
Contents
English 7 |
40	 Controlling Music Playback
40	 Buttons on the Remote Control used for
Music Playback
40	 Using the View & Options Menus
41	 Repeating Tracks on an Audio CD
41	 Shuffling Tracks on an Audio CD
41	 Creating a Playlist from an Audio CD
42	Ripping
42	 Playing Photo Contents
42	 Using the Tools Menu
43	 Using the View & Options Menus
44	 Using the Send Function
Network Services
45	 Logging In to Your Samsung Account
45	 Before Using Movies & TV Shows or Apps
46	 Using Movies & TV Shows
47	 Using Apps
47	 The Apps Screen at a Glance
47	 Downloading Applications
48	 Starting an Application
48	 Using the More Apps Screen
48	 Sorting the Apps
48	 Using the Options Menu Functions
52	 Screen Mirroring
52	 Using the Web Browser
52	 Link Browsing and Pointer Browsing
53	 The Control Panel at a Glance
54	 Using the Setting Menu
55	 Linking Your Internet Service Accounts
to the Player
56	 BD-LIVE™
Appendix
57	 Compliance and Compatibility Notice
58	 Copy Protection
58	 Network Service Disclaimer
59	 Licence
61	 Additional Information
61	Notes
63	 Resolution according to the contents type
64	 Digital Output Selection
65	 Troubleshooting
67	Repairs
68	 Specifications
Page: 7
Getting Started
Disc and Format Compatibility
Disc types and contents your player can play
Media Disc Type Details
VIDEO
Blu-ray Disc
3D Blu-ray Disc
BD-ROM or BD-RE/-R recorded in the BD-RE format.
DVD-VIDEO
DVD-RW
DVD-R
DVD+RW
DVD+R
DVD-VIDEO, recorded DVD+RW/DVD-RW(V)/DVD-R/+R that have been recorded and
finalized, or a USB storage media containing DivX, MKV, MP4 contents.
MUSIC
CD-RW/-R,
DVD-RW/-R,
BD-RE/-R
Music recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R or a USB storage media
containing MP3 or WMA contents.
PHOTO
CD-RW/-R,
DVD-RW/-R,
BD-RE/-R
Photos recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R or a USB storage media
containing JPEG contents.
|
| NOTEs |
\
\ The player may not play certain CD-RW/-R and DVD-R because of the disc type or recording conditions.
\
\ If a DVD-RW/-R has not been recorded properly in DVD video format, it will not be playable.
\
\ Your player will not play content that has been recorded on a DVD-R at a bit-rate that exceeds 10 Mbps.
\
\ Your player will not play content that has been recorded on a BD-R or USB device at a bit rate that exceeds 25 Mbps.
\
\ Playback may not work for some types of discs, or when you use specific functions, such as angle change and aspect ratio
adjustment. Information about the discs is written in detail on the disc box. Please refer to this if necessary.
\
\ When you play a BD-J title, loading may take longer than a normal title or some functions may perform slowly.
Disc types your player cannot play
•	HD DVD
•	DVD-ROM/PD/
MV, etc
•	DVD-RAM
•	Super Audio CD
(except CD layer)
•	DVD-RW (VR mode)
•	CVD/CD-ROM/CDV/
CD-G/CD-I/LD
(CD-Gs play audio only,
not graphics.)
•	3.9 GB DVD-R for
Authoring.
| 8 English
Page: 8
02
Getting
Started
Region Code
Both players and discs are coded by region.
These regional codes must match for a disc to
play. If the codes do not match, the disc will not
play.
The Region Number for this player is displayed on
the rear panel of the player.
Disc Type
Region
Code
Area
Blu-ray Disc
a
North America, Central America,
South America, Korea, Japan,
Taiwan, Hong Kong and South
East Asia.
b
Europe, Greenland, French
territories, Middle East, Africa,
Australia and New Zealand.
c India, China, Russia, Central and
South Asia.
DVD-VIDEO
1 The U.S., U.S. territories and
Canada
2 Europe, Japan, the Middle East,
Egypt, Africa, Greenland
3 Taiwan, Korea, the Philippines,
Indonesia, Hong Kong
4
Mexico, South America,
Central America, Australia,
New Zealand, Pacific Islands,
Caribbean
5 Russia, Eastern Europe, India,
North Korea, Mongolia
6 China
Logos of Discs the player can play
Blu-ray Disc 3D Blu-ray Disc
BD-LIVE DivX
PAL broadcast System in U.K.,
France, Germany, etc.
English 9 |
Page: 9
Getting Started
Supported Formats
Video File Support
File Extension Container Video Codec Resolution
Frame rate
(fps)
Bit rate (Mbps) Audio Codec
*.avi
*.mkv
*.asf
*.wmv
*.mp4
*.3gp
*.vro
*.mpg
*.mpeg
*.ts
*.tp
*.trp
*.mov
*.flv
*.vob
*.svi
*.m2ts
*.mts
*.divx
AVI
MKV
ASF
MP4
3GP
MOV
FLV
VRO
VOB
PS
TS
SVAF
DivX 3.11/4/5/6
1920x1080
(WMV v7,v8,
MSMPEG4 v3 :
1280x720)
6~30 30
Dolby Digital
LPCM
ADPCM(IMA, MS)
AAC
HE-AAC
WMA
Dolby Digital Plus
MPEG(MP3)
DTS (Core)
MPEG4 SP/ASP
H.264 BP/
MP/HP
Motion JPEG
Microsoft
MPEG-4 v3
Window Media
Video v7,v8,v9
MPEG2
MPEG1
VP6 640x480 4
MVC 24/25/30 60
*.webm WebM VP8 1920x1080 6~30 20 Vorbis
`
` Limitations
-
- Even when the file is encoded by a supported codec listed above, a file might not be played if its
content is defective or corrupted.
-
- Normal playback is not guaranteed if the file’s container information is wrong or the file itself is
corrupted.
-
- Files having higher bit or frame rates than indicated in the table above may stutter when played back.
-
- The Seek (Jump) function is not available if the file’s index table is damaged.
-
- When you playback a file remotely through a network connection, video playback may stutter
depending on the network speed.
-
- Some USB/Digital camera devices may not be compatible with the product.
`
` Video decoder
-
- Supports up to H.264 Level 4.1. (Does not support FMO/ASO/RS)
-
- Does not support VC1/AP/L4.
| 10 English
Page: 10
02
Getting
Started
-
- CODECs except for WMVv7, v8, MSMPEG4 v3,
MVC, VP6
1)	 Below 1280 x 720 : 60 frames max.
2)	 Above 1280 x 720 : 30 frames max.
-
- Does not support GMC 2 or higher.
-
- Supports SVAF (Top/Bottom, Side by Side).
-
- Supports BD MVC Spec.
`
` Audio decoder
-
- Supports WMA 10 PRO (Up to 5.1).
-
- Does not support WMA lossless audio.
-
- Supports ADPCM IMA,MS.
-
- Does not support ADPCM(A-Law, μ-Law).
-
- Does not support QCELP/AMR NB/WB.
-
- Supports vorbis (Up to 2ch).
-
- Supports DD+ (Up to 7.1ch).
Ğ
Ğ Supported DivX subtitle file formats
*.ttxt, *.smi, *.srt, *.sub, *.txt
|
| NOTEs |
\
\ Playback of some DivX, MKV or MP4 file may not be
supported depending on their video resolution and frame
rate.
Supported Subtitle File Formats
Name
File
Extension
External
MPEG-4 Timed text .ttxt
SAMI .smi
SubRip .srt
SubViewer .sub
Micro DVD .sub or.txt
SubStation Alpha .ssa
Advanced SubStation
Alpha
.ass
Powerdivx .psb
Internal
Xsub AVI
SubStation Alpha MKV
Advanced SubStation
Alpha
MKV
SubRip MKV
MPEG-4 Timed text MP4
Music File Support
File
Extension
Type Codec Support Range
*.mp3 MPEG
MPEG1
Audio
Layer 3
-
*.m4a
*.mpa
*.aac
MPEG4 AAC -
*.flac FLAC FLAC Supports up to 2ch
*.ogg OGG Vorbis Supports up to 2ch
*.wma WMA WMA
Supports WMA 10
Pro (Up to 5.1).
Does not support
WMA lossless audio.
Supports up to M2
profile.
Does not support
LBR mode.
*.wav wav wav -
*.mid
*.midi
midi midi type 0 and type 1
*.ape ape ape -
English 11 |
Page: 11
Getting Started
Picture File Support
File Extension Type Resolution
*.jpg
*.jpeg
JPEG 15360x8640
*.png PNG 4096x4096
*.bmp BMP 4096x4096
*.mpo MPO 15360x8640
Notes on the USB connection
•	Your player supports USB storage media, MP3
players, digital cameras, and USB card readers.
•	Some USB/digital camera devices may not be
compatible with the player.
•	Your player supports the FAT16, FAT32, and
NTFS files systems.
•	Connect USB devices directly to the player's
USB port. Connecting through a USB cable
may cause compatibility problems.
•	Inserting more than one memory device into
a multi-card reader may cause the reader to
operate improperly.
•	The player does not support the PTP protocol.
•	Do not disconnect a USB device during a
"loading" process.
•	The bigger the image resolution, the longer the
image takes to display.
•	This player cannot play MP3 files with DRM
(Digital Rights Management) downloaded from
commercial sites.
•	Your player only supports video that is under
30fps (frame rate).
•	Your player only supports USB Mass Storage
Class (MSC) devices such as thumb drives and
USB HDD. (HUB is not supported.)
•	Certain USB HDD Devices, multi-card readers
and thumb drives may not be compatible with
this player.
•	If some USB devices require excessive power,
they may be limited by the circuit safety device.
•	If playback from a USB HDD is unstable, provide
additional power by plugging the HDD into a
wall socket.
If the problem continues, contact the USB HDD
manufacturer.
•	SAMSUNG is not responsible for any data file
damage or data loss.
•	Your player does not support NTFS compressed,
sparse, or encrypted files.
-
- You can repair or format a USB device on
your Desktop PC. (MS-Windows OS only)
AVCHD (Advanced Video Codec High
Definition)
•	This player can play back AVCHD format discs.
These discs are normally recorded and used in
camcorders.
•	The AVCHD format is a high definition digital
video camera format.
•	The MPEG-4 AVC/H.264 format compresses
images with greater efficiency than the
conventional image compressing format.
•	Some AVCHD discs use the "x.v.Color" format.
This player can play back AVCHD discs that use
"x.v.Color" format.
•	"x.v.Color" is a trademark of Sony Corporation.
•	"AVCHD" and the AVCHD logo are trademarks
of Matsushita Electronic Industrial Co., Ltd. and
Sony Corporation.
|
| NOTEs |
\
\ Some AVCHD format discs may not play, depending on
the recording conditions.
AVCHD format discs need to be finalized.
\
\ "x.v.Color" offers a wider colour range than normal DVD
camcorder discs.
| 12 English
Page: 12
02
Getting
Started
Accessories
Check for the supplied accessories shown below.
Batteries for Remote Control (AAA Size) User Manual
APPS
PANDORA DIGITAL SUBTITLE INPUT
HOME
1
4
7
VOL+
2
5
8
0
VOL–
3
6
9
SOURCE
DISC MENU
SMART
TITLE MENU
VOL VOL
POPUP
A B C D
SEARCH FULL
SUBTITLE
SCREEN
SAMSUNG TV
– +
INFO
TOOLS
RETURN EXIT
HOME
AUDIO
REPEAT
HUB
Quick Setup Guide Remote Control
English 13 |
Page: 13
Getting Started
Front Panel
|
| NOTEs |
\
\ To upgrade the player's software through the USB Host jack, you must use a USB memory stick.
\
\ When the player displays the Blu-ray Disc menu, you cannot start the movie by pressing the Play button on the player or the
remote control. To play the movie, you must select Play Movie or Start in the disc menu, and then press the v button on
the remote control.
Rear Panel
PLAY/PAUSE BUTTON
USB HOST
REMOTE CONTROL SENSOR
DISC TRAY
STOP BUTTON
POWER BUTTON
OPEN/CLOSE BUTTON
HDMI OUT LAN
DIGITAL AUDIO OUT
| 14 English
Page: 14
02
Getting
Started
Remote Control
Tour of the Remote Control
Installing batteries
|
| NOTEs |
\
\ If the remote control does not operate properly:
-
- Check the polarity +/– of the batteries.
-
- Check if the batteries are drained.
-
- Check if the remote sensor is blocked by obstacles.
-
- Check if there is any fluorescent lighting nearby.
|
| CAUTION |
\
\ Dispose of batteries according to local environmental
regulations. Do not put them in the household trash.
APPS
PANDORA DIGITAL SUBTITLE INPUT
HOME
1
4
7
VOL+
2
5
8
0
VOL–
3
6
9
SOURCE
DISC MENU
SMART
TITLE MENU
VOL VOL
POPUP
A B C D
SEARCH FULL
SUBTITLE
SCREEN
SAMSUNG TV
– +
INFO
TOOLS
RETURN EXIT
AUDIO
REPEAT
HUB
HOME
Press to open and close the disc tray.
After setup, allows you to set the input
source on your TV.
(This button is only available in Samsung TV.)
Turn the player on and off.
Return to the previous menu.
These buttons are used both for menus
on the player and also several Blu-ray Disc
functions.
Press the number buttons to operate
options.
Use to enter the disc menu.
Press to skip backwards or forwards. Press to search backwards or forwards.
Use to access various audio functions on a
disc.
Press to use Apps.
Press to stop a disc.
Press to move to the Home screen.
Turn the TV on and off.
(This button is only available for Samsung TVs.)
TV volume adjustment.
(This button is only available for Samsung TVs.)
Press to pause a disc.
Press to play a disc.
Press to switch the Blu-ray Disc/DVD's
subtitle language.
Press to use the Tools menu.
Use to display the playback information.
Use to select menu items and change
menu values.
Press to exit the menu.
Use to enter the Popup menu/Title menu.
Allows you to repeat a title, chapter, track
or disc.
Press to search contents.
Press to use full screen function.
During the Blu-ray Disc/DVDs playback,
this button does not operate.
English 15 |
Page: 15
Connections
Connecting to a TV
Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI
IN jack on your TV.
-
- Do not connect the power cord to the wall outlet until you have made all the other connections.
-
- When you change the connections, turn off all devices before you start.
|
| NOTEs |
\
\ If you use an HDMI-to-DVI cable to connect to your display device, you must also connect the Digital Audio Out on the player
to an audio system to hear audio.
\
\ An HDMI cable outputs digital video and audio, so you don't need to connect an audio cable.
\
\ Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of your TV.
\
\ When you connect the player to your TV using the HDMI cable or to a new TV, and then turn it on for the first time, the player
automatically sets the HDMI output resolution to the highest supported by the TV.
\
\ A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Colour to Off in the menu.
\
\ To view video in the HDMI 720p, 1080i, or 1080p output mode, you must use a High speed (category 2) HDMI cable.
\
\ HDMI outputs only a pure digital signal to the TV.
If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on the screen.
Audio
Video
| 16 English
Page: 16
03
Connections
Connecting to an Audio System
You can connect the Blu-ray player to the audio system using the methods illustrated below.
-
- Do not connect the power cord to the wall outlet until you have made all the other connections.
-
- When you change the connections, turn off all devices before you start.
Method 1 Connecting to an HDMI supported AV receiver
•	Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the
HDMI IN jack on your receiver.
•	Best quality (Recommended)
Method 2 Connecting to an AV receiver with Dolby Digital or DTS decoder
•	Using a digital Optical cable (not supplied), connect the Optical Digital Audio Out jack on the product to
the Digital Optical In jack of the receiver.
•	Good quality
•	You will hear sound only through the front two speakers with Digital Output set to PCM.
Audio
Audio
Method 2
Method 1
English 17 |
Page: 17
Connections
Connecting to a Network Router
You can connect your player to your network
router using one of the methods illustrated below.
To use the AllShare network functionality, you
must connect your PC to your network as shown
in the illustrations.
The connection can be wired or wireless.
Wired Network
|
| NOTEs |
\
\ Your router or your Internet Service Provider's policies
may prevent the player from accessing Samsung's
software update server. If this occurs, contact your
Internet Service Provider (ISP) for more information.
\
\ DSL users, please use a router to make a network
connection.
Wireless Network
|
| NOTEs |
\
\ If your wireless router supports DHCP, this player can use
a DHCP or static IP address to connect to the wireless
network.
\
\ Set your wireless router to Infrastructure mode. Ad-hoc
mode is not supported.
\
\ The player supports only the following wireless security
key protocols:
-
- WEP (OPEN/SHARED), WPA-PSK (TKIP/AES),
WPA2-PSK (TKIP/AES)
\
\ Select a channel on the wireless router that is not
currently being used. If the channel set for the wireless
router is currently being used by another device nearby, it
will result in interference and communication failure.
\
\ If you select the Pure High-throughput (Greenfield)
802.11n mode and set the Encryption type on your router
to WEP, TKIP or TKIP-AES (WPS2Mixed), the player will
not support a connection in compliance with new Wi-Fi
certification specifications.
\
\ Wireless LAN, by its nature, may cause interference,
depending on the operating conditions (router
performance, distance, obstacles, interference by other
radio devices, etc).
Broadband
service
Broadband
service
Broadband modem
(with integrated router)
Broadband
modem
Router
Or
Broadband
service
Wireless Router
| 18 English
Page: 18
04
Settings
Settings
The Initial Settings Procedure
•	The Home screen will not appear if you do not
configure the initial settings.
•	The OSD (On Screen Display) may change in this
player after you upgrade the software version.
•	The access steps may differ depending on the menu
you selected.
After you have connected the player to your TV,
turn on the TV and player. When you turn on the
player the first time, the player's Initial Settings
screen appears on the TV. The Initial Setting
procedure lets you set the On Screen Display
(OSD) and menu languages, the aspect ratio
(screen size), the network type, and connect
the player to your network. For complete Initial
Settings instructions, see the Quick Setup Guide.
|
| NOTEs |
\
\ If you skip Network Setup during the Initial Settings
procedure, you can configure your network settings later.
See "Configuring Your Network Connection" on pages
27~30 for instructions.
\
\ If you want to display the Initial Settings screen again and
make changes, select Settings > System > Setup in
the Home screen or select the Reset option. (See pages
23 or 26)
\
\ If you want to use an Anynet+(HDMI-CEC) function,
please follow the instructions below.
1)	 Connect the player to an Anynet+(HDMI-CEC)-
compliant Samsung TV using HDMI Cable.
2)	 Set the Anynet+(HDMI-CEC) feature to On in both the
TV and the player.
3)	 Set the TV to the Initial Settings Procedure.
The Home Screen
1
Apps : Gives you access to various for pay or free-
of-charge applications you can download.
2
Photos, Videos & Music : Lets you play photos,
videos or music content from Disc, USB, PC or
mobile devices.
3
Settings : Opens the player's menu where you
can set various functions to suit your personal
preferences.
4 Web Browser : Provides access to the Internet.
5
Recommended Apps : Gives you direct access to
recommended applications.
6
Movies & TV Shows : Lets you download Films and
TV Shows from the Internet.
|
| NOTEs |
\
\ Depending on your country, this menu function
may not be supported.
|
| NOTEs |
\
\ If you leave the player in the stop mode for more than
5 minutes without using it, a screen saver will appear on
your TV. If the player is left in the screen saver mode for
more than 20 minutes, the power will automatically turn off.
Movies & TV
Shows
Apps Photos,
Videos &
Music
Web Browser	 Settings
a Samsung Account d Screen Mirroring
6
1
5
3
2
4
Go to Apps and connect to the network
to get recommended apps.
English 19 |
Page: 19
Settings
Accessing the Settings Screen
1.	 Select Settings on the Home screen, and
then press v button. The Settings screen
appears.
2.	 To access the menus, sub-menus, and
options on the Settings screen, please refer
to the remote control illustration below.
Buttons on the Remote Control Used
for the Settings Menu
1 HOME Button : Press to move to the Home screen.
2 RETURN Button : Return to the previous menu.
3
v (Enter) / DIRECTION buttons :
•	Press ▲▼◄► to move the cursor or select an
item.
•	Press the v button to activate the currently
selected item or confirm a setting.
4 EXIT Button : Press to exit the current menu.
Detailed Function Information
Each Settings function, menu item, and individual
option is explained in detail on-screen. To view an
explanation, use the ▲▼◄► buttons to select the
function, menu item, or option. The explanation
will usually appear on the right side of the screen.
A short description of each Settings function
starts on the next page. Additional information on
some of the functions is also in the Appendix of
this manual.
APPS
PANDORA DIGITAL SUBTITLE INPUT
HOME
1
4
7
VOL+
2
5
8
0
VOL–
3
6
9
SOURCE
DISC MENU
SMART
TITLE MENU
VOL VOL
POPUP
A B C D
SEARCH FULL
SUBTITLE
SCREEN
SAMSUNG TV
– +
INFO
TOOLS
RETURN EXIT
HOME
AUDIO
REPEAT
HUB
1
2 4
3
Display
3D Settings	
TV Aspect Ratio	 16:9 Original
BD Wise	 Off
Resolution	Auto
Movie Frame (24Fs)	 Auto
DVD 24Fs Conversion	 Off
Smart Hub Screen Size	 Size 3
Display
Audio
Network
Smart Features
System
Support
Settings
| 20 English
Page: 20
04
Settings
Settings Menu Functions
Display
3D Settings
Select whether to play a Blu-ray Disc with 3D contents
in 3D Mode.
•	If you move to the Home or Apps screen while in 3D
mode, the player will switch to 2D automatically.
TV Aspect Ratio
Lets you adjust the output of the player to the screen
size and screen format of your TV.
BD Wise
BD Wise is Samsung's latest inter-connectivity feature.
When you connect a Samsung player and a Samsung
TV with BD Wise to each other via HDMI, and BD Wise
is on in both the player and TV, the player outputs video
at the video resolution and frame rate of the Blu-ray
Disc/DVD.
Resolution
Set the output resolution of the HDMI video signal to BD
Wise, Auto, 1080p, 1080i, 720p or 576p/480p.
The number indicates the number of lines of video per
frame.
The i and p indicate interlaced and progressive scan,
respectively. Generally, the more lines, the higher quality.
Movie Frame (24Fs)
If the player is connected to a 24Fs compatible TV,
setting the Movie Frame (24Fs) feature to Auto lets the
player adjust its HDMI output to 24 frames per second
automatically for improved picture quality.
•	You can enjoy the Movie Frame (24Fs) feature only on
a TV supporting this frame rate.
•	Movie Frame is only available when the player is in the
HDMI 1080i or 1080p output resolution modes.
DVD 24Fs Conversion
Converts DVD playback to 24 frames per second and
outputs outputs it via HDMI. This option is only available
when Movie Frame (24Fs) is set to Auto.
Smart Hub Screen Size
Lets you select the optimal size for the Smart Hub
Screen.
HDMI Colour Format
Lets you set the colour space format for the HDMI
output so that it matches the capabilities of the
connected device (TV, monitor, etc). The screen goes
black momentarily after you have selected a format.
HDMI Deep colour
Lets you set the product to output HDMI video with
Deep Colour. Deep Colour provides more accurate
colour reproduction with greater colour depth.
Progressive Mode Lets you improve picture quality when viewing DVDs.
English 21 |
Page: 21
Settings
Audio
Digital Output
Lets you select the digital audio output format that is
suitable for your TV or AV Receiver. For more details,
see the digital output selection table on page 64.
PCM Downsampling
Lets you choose to have 96Khz PCM signals
downsampled to 48Khz before they are outputted to an
amplifier. Choose On if your amplifier or receiver is not
compatible with a 96Khz signal.
Dynamic Range Control
Lets you apply dynamic range control to Dolby Digital,
Dolby Digital Plus, and Dolby TrueHD audio.

 Auto : Automatically controls the dynamic range of
Dolby TrueHD audio, based on information in the
Dolby TrueHD soundtrack. Also turns dynamic range
control on for Dolby Digital and Dolby Digital Plus.

 Off : Leaves the dynamic range uncompressed,
letting you hear the original sound.

 On : Turns dynamic range control on for all three
Dolby formats. Quieter sounds are made louder and
the volume of loud sounds is reduced.
Downmixing Mode
Lets you select the multi-channel downmix method that
is compatible with your stereo system. You can choose
to have the player downmix to normal stereo or to
surround compatible stereo.
DTS Neo:6 Mode
You can enjoy multichannel sound via HDMI output from
a 2 channel audio source.
Network Network Status Lets you check the current network and Internet status.
Network Settings
Configure the network connection so you can enjoy
various features such as Internet services or AllShare
Wi-Fi functionality, and perform Software Updates.
Wi-Fi Direct
Lets you connect a Wi-Fi Direct device to the player
using a peer-to-pear network, without the need for a
wireless router.
Note that if the player is connected to a wireless network,
it may be disconnected when you use Wi-Fi Direct.
|
| NOTEs |
\
\ Text files, such as files with a .TXT or .DOC extension, will not
display when you are using the Wi-Fi Direct function.
| 22 English
Page: 22
04
Settings
Network
AllShare Settings
Lets you control which devices on your network, such
as smart phones and tablets, can share content with
your TV.
Device Name
Lets you input a name for the player that will identify it
on your networks.
BD-Live Settings
Set various BD-Live functions. BD-Live allows you to
access extra features available on some Blu-ray Discs if
you are connected to the Internet.

 BD-Live Internet Connection : Lets you fully allow,
partly allow, or prohibit a BD-Live Internet connection.

 BD Data Management : Manage BD data
downloaded from a BD-Live service or Blu-ray Disc.
Smart Features
Apps Settings
Lets you configure App notification settings and view
basic info about your Apps.

 Push Notification Settings : Receive notifications
from selected services.

 Properties : See basic info about Apps.
VOD Rating Lock
You can lock access to Video on Demand (VOD)
content based on its rating.
|
| NOTEs |
\
\ Depending on your country, this menu function may not be
supported.
Terms & Conditions,
Privacy Policy
You must review and agree to both the Smart Hub
Terms & Conditions and the privacy policy in order to
enjoy Smart Hub services.
Reset Smart Hub
Resets the Smart Hub and Samsung account settings
stored on your device.
System Setup
Lets you re-run the Initial Settings procedure. See the
Quick Setup Guide for details.
Quick Start
Lets you set the player to turn on quickly by decreasing
the boot time.
|
| NOTEs |
\
\ If this function is set to On, Standby power consumption will
be increased.
Language
You can select the language you prefer for the On-
screen menu, disc menu, audio, subtitles, etc.
•	The language you select for the disc menu, disc
audio, or subtitles will only appear if it is supported on
the disc.
English 23 |
Page: 23
Settings
System
Device Manager
You can connect a wireless USB keyboard or mouse to
the USB port on the front of the player.

 Keyboard Settings : Lets you configure a wireless
USB keyboard connected to the player.
|
| NOTEs |
\
\ You can use the keyboard only when a QWERTY keyboard
screen or window appears in the Web Browser.

 Mouse Settings : Lets you configure a wireless USB
mouse connected to the player. You can use the
mouse in the player's menu and the Web Browser in
the same way you use a mouse on your PC.
`
` To use a mouse with the player's menu:
1.	 Connect the USB mouse to the player.
2.	 Click the primary button you selected in Mouse
Settings. The Simple Menu appears.
3.	 Click the menu options you want.
|
| NOTEs |
\
\ Some USB HID keyboards and mice may not be compatible
with your product.
\
\ Some HID keyboard keys may not work.
\
\ Wired USB keyboards are not supported.
\
\ Some applications may not be supported.
\
\ If a wireless HID Keyboard does not operate because of
interference, move the keyboard closer to the player.
| 24 English
Page: 24
04
Settings
System
Security
The default security PIN is 0000. Enter the default PIN to
access the security function if you haven't created your
own PIN. After you have accessed the security function
for the first time, change the PIN using the Change PIN
function.

 BD Parental Rating : Prevents playback of Blu-ray
Discs with a rating equal to or above a specific age
rating you have set unless the PIN is entered.

 DVD Parental Rating : Prevents playback of DVDs
with a rating above a specific numerical rating you
have set unless the PIN is entered.

 Change PIN : Change the 4-digit PIN used to access
security functions.
`
` If you forget your PIN:
1.	 Remove any disc or USB storage device.
2.	 Press and hold the @ button on the top panel for 5
seconds or more.
All settings will revert to the factory default settings.
General
You can change the options listed below to match your
preferences.

 Time Zone : Select the time zone in which you live.

 Menu Transparency : Adjust the transparency of the
menu box.
Anynet+ (HDMI-CEC)
Anynet+ is a convenient function that offers linked
operations with other Samsung players that have the
Anynet+ feature and lets you control those products
with one Samsung TV remote. To operate this function,
you must connect this player to an Anynet+ Samsung
TV using an HDMI cable.
DivX® Video On
Demand
View DivX® VOD Registration Codes to purchase and
play DivX® VOD contents.
English 25 |
Page: 25
Settings
Support
Remote Management
When activated, lets Samsung Call Centre agents
diagnose and fix problems with the product remotely.
Requires an active Internet connection.
|
| NOTEs |
\
\ Remote Management service might not be available in some
countries.
\
\ Contact your nearest service centre for your PIN code and tell
the code to the person in charge. It enables remote diagnosis
of the product and required measures.
Software Update
For more information about the Software Update
function, see "Upgrading Software" on pages 31~32.
Contact Samsung
Provides contact information for assistance with your
player.
Reset
Resets all settings to their default settings except for the
network and Smart Hub settings, and then launches the
Setup function.
The default security PIN is 0000.
| 26 English
Page: 26
04
Settings
Networks and the Internet
When you connect this player to a network,
you can use network based applications and
functions such as Smart Hub and BD-LIVE,
and upgrade the player's software through the
network connection. For more information about
accessing and using Internet services, see the
Network Services chapter of this manual on pages
45~56. Instructions for configuring the network
connection start below.
Configuring Your Network Connection
Before you begin, contact your ISP to find out
if your IP address is static or dynamic. If it is
dynamic, and you have a wired or wireless
network, we recommend using the Automatic
configuration procedures described below.
If you are connecting to a wired network, connect
the player to your router using a LAN cable before
you start the configuration procedure.
If you are connecting to a wireless network,
disconnect any wired network connection before
you begin.
To begin configuring your network connection,
follow these steps:
Wired Network
Ğ
Ğ Wired - Automatic
1.	 In the Home screen, select Settings, and
then press the v button.
2.	 Select Network, and then press the v
button.
3.	 Select Network Settings, and then press the
v button.
4.	 Select Wired in the Network Settings screen,
and then press the v button.
5.	 Select Connect button, and then press the
v button. The product detects the wired
connection, verifies the network connection
and then connects to the network.
Ğ
Ğ Wired - Manual
If you have a static IP address or the Automatic
procedure does not work, you'll need to set the
Network Settings values manually.
Follow Steps 1 and 2 in Wired Network, and then
follow these steps:
1.	 Select Network Status. The player searches
for a network, and then displays the
connection failed message.
2.	 On the bottom of the screen, select IP
Settings, and then press the v button.
The IP Settings screen appears.
3.	 Select the IP Setting field, and then press the
v button.
4.	 Select Enter manually in the IP Setting field,
and then press the v button.
5.	 Select a value to enter (IP Address, for
example), and then press the v button.
Use the number keypad on your remote
control to enter the numbers for the value.
You can also enter numbers using the ▲▼
buttons. Use the ◄► buttons on the remote
control to move from entry field to entry field
within a value. When done with one value,
press the v button.
6.	 Press the ▲ or ▼ button to move to another
value, and then enter the numbers for that
value following the instructions in Step 5.
7.	 Repeat Steps 5 and 6 until you have filled in
all values.
|
| NOTEs |
\
\ You can get the Network values from your Internet
provider.
8.	 When finished entering all the values, select
OK, and then press the v button. The
player verifies the network connection and
then connects to the network.
English 27 |
Page: 27
Settings
Wireless Network
You can setup a wireless network connection in
four ways:
-
- Wireless Automatic
-
- Wireless Manual
-
- WPS(PBC)
-
- WPS(PIN)
When you configure the wireless network
connection, any wireless network devices currently
connected through the player or, if applicable,
the player's current wired connection, will be
disconnected.
Ğ
Ğ Wireless - Automatic
1.	 In the Home screen, select Settings, and
then press the v button.
2.	 Select Network, and then press the v
button.
3.	 Select Network Settings, and then press the
v button.
4.	 Select Wireless in the Network Settings
screen, and then press the v button. The
player searches for and then displays a list of
the available networks.
5.	 Select the desired network, and then press
the v button.
6.	 On the Security screen, enter your network's
Security Code or Pass Phrase.
Enter numbers directly using the number
buttons on your remote control. Enter letters
by selecting a letter with an arrow button, and
then pressing v button.
|
| NOTEs |
\
\ To view the password as you enter it, use the arrow
buttons to select Show Password on the right side, and
then press v button.
7.	 When done, select Done and then press the
v button. The player verifies the network
connection and then connects to the
network.
8.	 When verification is complete, select OK, and
then press the v button.
|
| NOTEs |
\
\ You should be able to find the Security Code or Pass
Phrase on one of the set up screens you used to set up
your router or modem.
Ğ
Ğ Wireless - Manual
If you have a static IP address or the Automatic
procedure does not work, you'll need to set the
Network Settings values manually.
1.	 Follow the directions in Wireless - Automatic
through Step 5.
2.	 The player searches for a network, and then
displays the connection failed message.
3.	 On the bottom of the screen, select IP
Settings, and then press the v button.
The IP Settings screen appears.
4.	 Select the IP Setting field, and then press the
v button.
5.	 Select Enter manually in the IP Setting field,
and then press the v button.
linksys3
solugen_edu#2
iptime23
solugen_edu#1
You can connect your Blu-ray
player to the internet. Please
select which wireless network to
use.
	Refresh	 WPS(PBC)
Network Settings
Select your network type.
Network type	 Wireless
Wireless network
| 28 English
Page: 28
04
Settings
6.	 Select a value to enter (IP Address, for
example), and then press v button. Use
the number keypad on your remote control
to enter the numbers for the value. You can
also enter numbers using the ▲▼ buttons.
Use the ◄► buttons on the remote control
to move from entry field to entry field within a
value. When done with one value, press the
v button.
7.	 Press the ▲ or ▼ button to move to another
value, and then enter the numbers for that
value following the instructions in Step 6.
8.	 Repeat Steps 6 and 7 until you have filled in
all values.
|
| Notes |
\
\ You can get the Network values from your Internet
provider.
9.	 When finished, select OK, and then press the
v button. The Security Screen appears.
10.	 On the Security screen, enter your network's
Security Code or Pass Phrase. Enter
numbers directly using the number buttons
on your remote control. Enter letters by
selecting a letter with the ▲▼◄► buttons,
and then pressing the v button.
11.	 When finished, select Done at the right of the
screen, and then press the v button.
The player verifies the network connection
and then connects to the network.
12.	 After the player verifies the network, select
OK, and then press the v button.
Ğ
Ğ WPS(PBC)
1.	 In the Home screen, select Settings, and
then press the v button.
2.	 Select Network, and then press the v
button.
3.	 Select Network Settings, and then press the
v button.
4.	 Select Wireless in the Network Settings
screen, and then press the v button.
5.	 Press the ▲ button on your remote, and then
press the ► button to select the WPS(PBC).
6.	 Press the v button on your remote. The
"Press the PBC button" message appears.
7.	 Press the WPS(PBC) button on your router
within two minutes. Your player automatically
acquires all the network settings values it
needs and connects to your network.
The Network Status screen appears. The
player connects to the network after the
network connection is verified.
Ğ
Ğ WPS(PIN)
Before you begin, open the router's setup menu
on your PC and access the screen with the WPS
PIN entry field.
1.	 In the Home screen, select Settings, and
then press the v button.
2.	 Select Network, and then press the v
button.
3.	 Select Network Settings, and then press the
v button.
4.	 Select Wireless in the Network Settings
screen, and then press the v button.
The player searches for and then displays a
list of the available networks.
5.	 Select the desired network, and then press
the ► button.
6.	 Select the WPS(PIN), and then press the
v button. The PIN pop-up appears.
7.	 Enter the PIN into the WPS PIN entry field in
the router's Set Up screen and then save the
the screen.
|
| NOTEs |
\
\ Contact the manufacturer of the router for instructions
explaining how to access the route's Set Up screens or
refer to the router's user's manual.
\
\ For WPS connection, set your wireless router’s security
encryption to AES. Setting to WEP security encryption
does not support WPS connection.
English 29 |
Page: 29
Settings
Wi-Fi Direct
The Wi-Fi Direct function allows you to connect
Wi-Fi Direct devices to the player and each other
using a peer-to-peer network, without a wireless
router.
|
| NOTEs |
\
\ Some Wi-Fi Direct devices may not support the AllShare
function if connected via Wi-Fi Direct. If this is the case,
it is advisable to change the network connection method
between devices.
\
\ Bluetooth transmissions can interfere with the Wi-Fi
Direct signal. Before you use the Wi-Fi Direct function,
we strongly recommend that you turn off the Bluetooth
function of any active mobile device.
1.	 Turn on the Wi-Fi direct device and activate
its Wi-Fi Direct function.
2.	 In the Home screen, select Settings, and
then press the v button.
3.	 Select Network, and then press the v
button.
4.	 Select Wi-Fi Direct, and then press the v
button.
The Wi-Fi Direct devices that you can
connect appear.
5.	 You have three ways to complete the Wi-Fi
connection:
•	Through the Wi-Fi device.
•	Through the player using PBC.
•	Through the player using a PIN.
Each is covered below.
Through the Wi-Fi Device
1.	 On the Wi-Fi device, follow the procedure on
the device for connecting to another Wi-Fi
Direct device. See the device's user manual
for instructions.
2.	 When you have completed the procedure,
you should see a pop-up on your TV screen
saying that a device that supports Wi-Fi
Direct has requested to connect. Select OK,
and then press the v button to accept.
3.	 The Connecting pop-up appears, followed
by the Connected pop-up. When it closes,
you should see the device listed on the Wi-Fi
Direct screen as connected.
Through the Player Using PBC
1.	 Select the Wi-Fi Direct device you want to
connect to this player, and then press the v
button. The PBC/PIN pop up appears.
2.	 Select PBC, and then press the v button.
The PBC pop-up appears.
3.	 Press the PBC button on the Wi-Fi Direct
device within 2 minutes.
4.	 The Connecting pop-up appears, followed
by the Connected pop-up. When it closes,
you should see the device listed on the Wi-Fi
Direct screen as connected.
Through the Player Using a PIN
1.	 Select the Wi-Fi Direct device you want to
connect to this player, and then press the v
button. The PBC/PIN pop up appears.
2.	 Select PIN, and then press the v button.
The PIN pop-up appears.
3.	 Note the PIN code in the pop-up, and then
enter it into the appropriate field in the Wi-Fi
Direct device you want to connect.
4.	 The Connecting pop-up appears, followed
by the Connected pop-up. When it closes,
you should see the device listed on the Wi-Fi
Direct screen as connected.
|
| NOTEs |
\
\ The current wired or wireless network connection will be
disconnected when you use the Wi-Fi Direct function.
\
\ Text files, such as files with a .TXT or .DOC extension, will
not display when you are using the Wi-Fi Direct function.
| 30 English
Page: 30
04
Settings
Upgrading Software
The Software Update menu allows you to
upgrade the player's software for performance
improvements or additional services.
•	Never turn the player off or back on manually during
the update process.
1.	 In the Home screen, select the Settings, and
then press the v button.
2.	 Select Support, and then press the v
button.
3.	 Select Software Update, and then press the
v button.
4.	 To download update software and update
now, select Update Now, and then press the
v button. See Update Now on this page for
details.
5.	 To let the product download update software
automatically when available, select Auto
Update, and then press the v button. See
Auto Update on page 32 for details.
|
| NOTEs |
\
\ The upgrade is complete when the player turns off, and
then turns on again by itself.
\
\ Samsung Electronics shall takes no legal responsibility
for player malfunction caused by an unstable Internet
connection or consumer negligence during a software
Update.
\
\ If you want to cancel the upgrade while the upgrade
software is downloading, press the v button.
\
\ When a system upgrade is in progress, "UPDATE" is
displayed on the front panel.
Update Now
You can use Update Now to update the software
through your network connection or by using a
USB flash drive. The network instructions are
below. The USB flash drive instructions are on the
next page.
1.	 Select Update Now, and then press the v
button.
The Update now pop-up appears.
2.	 The product searches on line for the latest
software version.
3.	 If it finds a new version, the Update Request
pop-up appears.
4.	 Select OK. The product upgrades the
software, turns off, and then turns on
automatically.
5.	 If you do not select OK or Cancel in one
minute, the product stores the new upgrade
software. You can upgrade the software later
using Auto Update.
6.	 If you select Cancel, the product cancels the
upgrade.
|
| NOTEs |
\
\ When the system upgrade is done, check the software
details in the Product Information section of the Contact
Samsung screen.
\
\ Do not turn off the player during the Software Update. It
may cause the player to malfunction.
English 31 |
Page: 31
Settings
Auto Update
You can set the Auto Update function so that the
player downloads new upgrade software when it
is in Auto Update mode.
In Auto Update mode, the player is off, but its
Internet connection is active. This allows the player
to download upgrade software automatically,
when you are not using it.
1.	 Press the ▲▼ buttons to select Auto
Update, and then press the v button.
2.	 Select On or Off.
If you select On, the player will automatically
download new upgrade software when it is
in Auto Update mode with the power off. If it
downloads new upgrade software, the player
will ask you if you want to install it when you
turn the player on.
|
| NOTEs |
\
\ To use the Auto Update Mode Upgrade function, your
player must be connected to the Internet.
< By USB >
1.	 Visit www.samsung.com.
2.	 Click SUPPORT on the top right of the page.
3.	 Enter the product's model number into the
search field. As you enter the model number,
a drop down will display products that match
the model number.
4.	 Left click your product's model number in the
drop down list.
5.	 On the page that appears, scroll down to and
then click Firmware Manuals & Downloads.
6.	 Click Firmware in the centre of the page.
7.	 Click the ZIP button in the File column on the
right side of the page.
8.	 Click Send in the first pop-up that appears.
Click OK in the second pop-up to download
and save the firmware file to your PC.
9.	 Unzip the zip archive to your computer. You
should have a single folder with the same
name as the zip file.
10.	 Copy the folder to a USB flash drive.
11.	 Make sure no disc is inserted in the product,
and then insert the USB flash drive into the
USB port of the product.
12.	 In the product’s menu, go to Settings >
Support > Software Update.
13.	 Select Update Now.
14.	 The product searches for the software on the
USB drive. When it finds the software, the
Update Request pop-up appears.
15.	 Select OK. The product upgrades the
software, turns off, and then turns on
automatically.
|
| NOTEs |
\
\ There should be no disc in the player when you upgrade
the software using the USB jack.
\
\ When the system upgrade is done, check the software
details in the Product Information section of the Contact
Samsung screen.
\
\ Do not turn off the player during the Software Update.
It may cause the player to malfunction.
\
\ Software Updates using the USB jack must be performed
with a USB flash memory stick only.
| 32 English
Page: 32
05
Media
Play
Media Play
Your Blu-ray Disc Player can play content located
on Blu-ray/DVD/CD discs, USB devices, PCs,
smart phones, tablets, and on the Web.
To play content located on your PC or on mobile
devices, you must connect them and this product
to your network. To play content on your PC, you
must also install Allshare network software on your
PC.
|
| NOTEs |
\
\ PCs running Windows 7 and Windows 8 have Allshare
software (Play To) built in.
The AllShare Play Screen
For all media, the AllShare Play Main screen or
one of its sub screens is your primary means of
accessing and playing contents saved on a variety
of devices, either connected directly or using your
network.
Accessing the AllShare Play Screen
To access the AllShare Play Main screen, select
Photos, Videos & Music on the Home screen,
and then press the v button.
Playing Commercial Discs
1.	 Press the 8 button to open the disc tray.
2.	 Place a disc gently into the disc tray with the
disc’s label facing up.
3.	 Press the 8 button to close the disc tray.
Playback starts automatically.
4.	 If playback does not start automatically, press
the 6 button on the remote control.
Playing Files on a USB Device
There are two methods you can use to play or
view multimedia files located on a USB device
through your player.
Method 1
1.	 Turn the player on.
2.	 Connect the USB device to the USB port on
the front panel of the player. The New Device
Connected pop-up appears.
|
| NOTEs |
\
\ If the pop-up does not appear, go to Method 2.
3.	 Use the ▲▼ buttons to select Photos,
Videos, Music or All Content, and then
press the v button. The AllShare Play
screen appears listing the content of the
device. Depending on how the contents is
arranged, you will see either folders, individual
files, or both.
Movies & TV
Shows
Apps Photos,
Videos &
Music
	 Web Browser	 Settings
a Samsung Account d Screen Mirroring
Go to Apps and connect to the network
to get recommended apps.
Photos
Videos
Music
All Content
New device connected.
m80
English 33 |
Page: 33
Media Play
|
| NOTEs |
\
\ Even though the player will display folders for all content
types, it will only display files of the Content Type you
selected in Step 2. For example, if you selected music,
you will only be able to see music files. You can change
this selection by returning to the All Share Play screen and
going to Step 4 in Method 2 below.
4.	 If necessary, use the the ▲▼◄► buttons
to select a folder, and then press the v
button.
5.	 Select a file to view or play, and then press
the v button.
6.	 Press the RETURN button to exit a folder
or the EXIT button to return to the Home
screen.
7.	 Go to pages 37~44 for instructions that
explain how to control playback of videos,
music, and pictures on a USB device.
Method 2
1.	 Turn the player on.
2.	 Connect the USB device to the USB port on
the front panel of the player.
3.	 Select Photos, Videos & Music on the
Home screen, and then press the v button.
4.	 Select Photos, Videos, Music or All
Content, and then press the v button.
|
| NOTEs |
\
\ Even though the player will display folders for all content
types, it will only display files of the Content Type you
selected in Step 2. For example, if you selected music,
you will only be able to see music files. You can change
this selection by returning to the AllShare Play screen and
repeating Step 4.
5.	 Use the ◄► buttons to select the desired
device and then press the v button.
Depending on how the contents are
arranged, you will see either folders, individual
files, or both.
6.	 If necessary, use the ▲▼◄► buttons to
select a folder, and then press the v button.
7.	 Use the ▲▼◄► buttons to select a file to
view or play, and then press the v button.
8.	 Press the RETURN button to exit a folder or
the EXIT button to return to Home screen.
9.	 Go to pages 37~44 for instructions that
explain how to control playback of videos,
music, and pictures on a USB device.
|
| NOTEs |
\
\ If you insert a disc when playing a USB device, the device
mode changes to "Disc" automatically.
Playing a Disc with User Recorded
Content
You can play multimedia files you have recorded
on Blu-ray, DVD, or CD discs.
1.	 Place a user recorded disc into the disc
tray with the disc’s label facing up, and then
close the tray. The Device Connected pop-up
appears.
2.	 Use the ▲▼ buttons to select the type of
content you want to view or play - Photos,
Videos, Music, or All Content - and then
press the v button.
|
| NOTEs |
\
\ Even though the player will display folders for all content
types, it will only display files of the Content Type you
selected in Step 2. For example, if you selected music,
you will only be able to see music files. You can change
this selection by returning to the AllShare Play screen and
repeating Step 2.
3.	 A screen appears listing the contents of the
disc. Depending on how the contents are
arranged, you will see either folders, individual
files, or both.
| 34 English
Page: 34
05
Media
Play
4.	 If necessary, use the ▲▼◄► buttons to
select a folder, and then press the v button.
5.	 Use the ▲▼◄► buttons to select a file to
view or play, and then press the v button.
6.	 Press the RETURN button one or more times
to exit a current screen, exit a folder, or to
return to the Home screen.
Press the EXIT button to return directly to the
Home Screen.
7.	 Go to pages 37~44 for instructions that
explain how to control playback of videos,
music, and pictures on a disc.
Using the Allshare Network
Function
Allshare software lets you play Photos, Videos,
or Music located on your PC or your Allshare
compatible device through the player using a
wireless connection.
To Download the Allshare Software
If your PC is not running Windows 7 or 8, you must
install Allshare software on your PC to use the
Allshare function. You can download the Allshare
software and get detailed instructions for using the
Allshare software from the Samsung.com website.
1.	 Go to www.samsung.com.
2.	 Click Support at the top of the page.
3.	 On the Support page, enter the model
number of your player into the Model Number
field, and then press the v button.
4.	 On the page that appears, click See All
Downloads on the left side of the screen
under Downloads. The Download Tab
appears.
5.	 On the Download Tab, click Software.
6.	 In the list of software, click the EXE button on
the right side of the Allshare software line.
7.	 In the pop-up that appears, click the Send
button.
8.	 In the next pop-up, click Save File.
9.	 Find the Allshare install file on your disk, and
then double click the file.
10.	 In the pop-up that appears, click Run, and
then follow the directions that appear on your
screen.
Download the Allshare software Installation/
Instruction manual from the same Software Tab by
clicking the corresponding PDF file symbol in the
File column on the right. The file, in PDF format,
will download and open. You can view and/or
save the file.
English 35 |
Page: 35
Media Play
Playing Content Located on Your PC
or Allshare Device through the Blu-ray
Disc Player
1.	 Connect the Blu-ray Disc Player, your PC,
and/or your Allshare compatible device to the
same wireless network.
2.	 Follow the directions in the Allshare software
Installation/Instruction manual to set up
devices and files for playing or viewing.
3.	 Select Photos, Videos & Music on the
player's Home screen, and then press
the v button. The AllShare Play screen
appears.
4.	 Select the type of content you want to play
- Photos, Videos, Music, or All Content -
and then press the v button.
5.	 On the next screen, select Allshare, and then
press the v button.
6.	 In the list of Allshare connected devices that
appears, select your PC or other Allshare
compatible device, and then press the v
button. A screen listing the available files
appears.
7.	 Select the file you want to play or view, and
then press the v button.
Controlling the Playback of Content
Located on Your PC with Your Smart
Phone
(Only available with Samsung phones supporting
Allshare functionality.)
1.	 Connect the Blu-ray Disc Player, your PC,
and your Allshare compatible cellular phone
to the same wireless network.
2.	 Follow the directions in the Allshare software
Installation/Instruction manual to set up
devices and files for playing or viewing.
3.	 On your computer, using the Allshare
software, confirm your phone is connected.
4.	 On the phone, select the file you want to view
or play, and then select the Blu-ray player as
the playback device.
5.	 On the phone, start playback.
AllShare Connection
PC Blu-ray Disc Player
Play back
PC's files
AllShare
Connection
Control PC's files on the
Blu-ray Disc Player
PC
Allshare Smart Phone
Blu-ray Disc Player
Play back
PC's files
| 36 English
Page: 36
05
Media
Play
Controlling Video Playback
You can control the playback of video content located on a Blu-ray/DVD disc, USB, mobile device or PC.
Depending on the disc or contents, some of the functions described in this manual may not be available.
Buttons on the Remote Control used for Video Playback
„
„ Using the disc menu, title menu, popup
menu, and title list
DISC MENU
button
During playback, press this button to
display the Disc menu.
TITLE MENU
button
During playback, press this button to
display the Title menu.
•	If your disc has a playlist, press the
View to go to the playlist.
POPUP MENU
button
During playback, press this button to
display the Popup menu.
Using the Tools Menu
During playback or in pause mode, press the
TOOLS button.
Play from the
Beginning
Select to return to the beginning of the
movie, and then press the v button.
3D
Use 3D menu to select Side by Side
or Top and Bottom option if the 3D
content currently playing does not
properly appear in 3D mode.
|
| NOTEs |
\
\ Use 3D menu for 3D contents only.
If applied to 2D contents, it may not
be displayed properly.
Movie Note
Movie Note provides information such
as director, cast, synopsis, etc.
|
| NOTEs |
\
\ This function is available if the disc
includes Movie Note information
and the player is connected to a
network.
Search Scene
You can use the Search Scene function
during playback to view or start a
movie from the scene of your choice.
„
„ Playback related buttons
The player does not play sound in Search, Slow or
Step mode.
•	To return to normal speed playback, press the
6 button.
6 button Starts playback.
5 button Stops playback.
7 button Pauses playback.
Fast Motion
Play
During playback, press the 3 or 4
button.
Each time you press the 3 or 4
button, the playback speed will change.
Slow Motion
Play
In pause mode, press the 4 button.
Each time you press the 4 button, the
playback speed will change.
Step Motion
Play
In pause mode, press the 7 button.
Each time you press the 7 button, a
new frame appears.
Skip Motion
Play
During playback, press the 1 or 2
button.
Each time you press 1 or 2 button,
the disc moves to the previous or next
chapter or file.
APPS
PANDORA DIGITAL SUBTITLE INPUT
HOME
1
4
7
VOL+
2
5
8
0
VOL–
3
6
9
SOURCE
DISC MENU
SMART
TITLE MENU
VOL VOL
POPUP
A B C D
SEARCH FULL
SUBTITLE
SCREEN
SAMSUNG TV
– +
INFO
TOOLS
RETURN EXIT
HOME
AUDIO
REPEAT
HUB
English 37 |
Page: 37
Media Play
Search Scene
|
| NOTEs |
\
\ If the index information in the file
is damaged or the file does not
support indexing, you will not be
able to use the Search Scene
function.
\
\ If you are using the Allshare function
after connecting to a computer
through your network, Search
Scene may not be supported.
Search Titles
If there is more than one movie on the
disc or device, select to start a different
title.
1.	 Select Search Titles, and then
press the v button.
2.	 Use the ▲▼ buttons to select
a title, and then press the v
button.
Search
Chapters
Select to play the chapter of your
choice.
1.	 Select Search Chapters, and then
press the v button.
2.	 Use the ▲▼ buttons to select a
chapter, and then press the v
button.
Search Time
Bar
Select to play the movie from a
selected time point.
1.	 Select Search Time Bar, and then
press the v button.
2.	 Using the number buttons, enter
the time point you want to go to,
and then press the v button.
|
| NOTEs |
\
\ You can also use the ◄► buttons
to advance or rewind the movie.
The movie advances or rewinds one
minute each tme you press the ◄
► buttons.
Repeat Mode
Select to repeat a title, chapter, or
specific section.
-
- Off : Select to return to normal
playback.
-
- Title : Choose to repeat a selected
title.
-
- Chapter : Choose to repeat a
specific chapter.
-
- Repeat A-B : Choose to repeat a
specific section.
1.	 Press the ▲▼ buttons to select
repeat A-B, and then press the
v button.
2.	 Press the v button at the point
where you want repeat play to start
(A). Let the movie play.
3.	 Press the v button at the point
where you want repeat play to stop
(B).
|
| NOTEs |
\
\ You must set point (B) at least 5
seconds of playing time after point
(A).
Picture Mode
Select to set the picture mode.
-
- Dynamic : Increases sharpness and
brightness.
-
- Standard : Choose this setting for
most viewing applications.
-
- Movie : The best setting for
watching movies.
-
- User : Lets you adjust the sharpness
and noise reduction function
respectively.
|
| NOTEs |
\
\ When you use the BD wise function,
this menu will not appear.
Audio
Select to set the desired audio
language.
| 38 English
Page: 38
05
Media
Play
Subtitle
Select to set the desired subtitle
language.
-
- You can also operate this function
by pressing the SUBTITLE button on
the remote control.
Subtitle
Settings
Select to set the desired subtitle
options.
Angle
Select to view a scene from another
angle. The Angle option displays the
number of angles available to view.
When a Blu-ray Disc/DVD contains
multiple angles of a particular scene,
you can change angle.
BONUSVIEW
Video Select to set the desired bonusview
option.
BONUSVIEW
Audio
Full screen
Select to set the size of the video
image. Choose Original, Mode 1
(larger), or Mode 2 (largest).
Information Select to view video file information.
|
| NOTEs |
\
\ Depending on the disc or storage device, the Tools menu
may differ or not be shown.
\
\ Video files with high bit rates of 20Mbps or more strain
the player's capabilities and may stop playing during
playback.
Using the View & Options Menus
Using the View Menu
On the video file playback screen, use the ▲▼◄►
buttons to select View and then press the v
button.
Title
Displays all the video files on the media
or storage device by title.
Date
Displays all the folders with videos by
date. If you select a folder, and then
press the v button, displays all the
videos in the folder by date.
Folder
Displays all the folders on the media or
storage device.
Playlist Displays available play lists.
Title List
Displays all the video files on the media
or storage device by title. Alternate to
Title.
|
| NOTEs |
\
\ Depending on the disc or storage device, the View menu
may differ or not be shown.
Using the Options Menu
On the video file playback screen, use the ▲▼◄►
buttons to select Options and then press the v
button.
Play Selected
Lets you create a playlist by selecting
specific files to play. It works essentially
the same way for all media. See
Creating a Playlist on an Audio CD on
pages 41~42.
Send
Select to upload selected files to on-
line sites (Picasa, Facebook etc) or a
device. To use this function, you need
to establish an account with the on-line
site, and then log in using the Log In
function.
Delete Select to delete a file from a device.
|
| NOTEs |
\
\ Depending on the disc or storage device, the Options
menu may differ or not be shown.
English 39 |
Page: 39
Media Play
Controlling Music Playback
You can control the playback of music content
located on a DVD, CD, USB, mobile device or PC.
Depending on the disc or contents, some of the
functions described in this manual may not be
available.
Buttons on the Remote Control used
for Music Playback
1
NUMBER buttons : If numbered tracks are displayed,
press the number of a track.The selected track is
played.
2 12 button : Moves to the previous/next track.
3 5 button : Stops a track.
4
Fast Play (Audio CD (CD-DA) only)
During playback, press the 3 or 4 button.
Each time you press the 3 or 4 button, the
playback speed will change.
5 7 button : Pauses a track.
6 6 button : Plays the currently selected track.
Using the View & Options Menus
Using the View Menu
On the music file playback screen, use the ▲▼◄►
buttons to select View, and then press the v
button.
Track
Displays all the music tracks on the
media or storage device.
Album
Displays all music on the media or
storage device by album.
Artist
Displays all the the music files on the
media or storage device by artist.
Genre
Displays all the music on the media or
storage device by genre.
Folder
Displays all the folders on the media or
storage device.
|
| NOTEs |
\
\ Depending on the disc or storage device, the View menu
may differ or not be shown.
Using the Options Menu
On the music file playback screen, use the ▲▼◄►
buttons to select Options and press the v button.
Play Selected
Lets you create a playlist by selecting
specific files to play. It works essentially
the same way for all media. See
Creating a Playlist on an Audio CD on
pages 41~42.
Send
Select to send selected files to other
devices.
APPS
PANDORA DIGITAL SUBTITLE INPUT
HOME
1
4
7
VOL+
2
5
8
0
VOL–
3
6
9
SOURCE
DISC MENU
SMART
TITLE MENU
VOL VOL
POPUP
A B C D
SEARCH FULL
SUBTITLE
SCREEN
SAMSUNG TV
– +
INFO
TOOLS
RETURN EXIT
HOME
AUDIO
REPEAT
HUB
1
4
2
5
6
3
| 40 English
Page: 40
05
Media
Play
Ripping
The Ripping function converts CD
audio to the mp3 format and saves the
converted files on a USB device or the
mobile device connected to the player.
See Ripping on page 42.
Information Select to see the (Contents) information.
Encoding
Select to manage the text encoding
options.
Delete Select to delete a file from the device.
|
| NOTEs |
\
\ Depending on the disc or storage device, the Options
menu may differ or not be shown.
Repeating Tracks on an Audio CD
You can set the product to repeat tracks on an
audio CD (CD-DA/MP3).
1.	 On the Playback screen, use the ▲▼◄►
buttons to select in the lower left corner
of the screen, and then press the v button.
2.	 Use the ▲▼ to select the repeat mode you
want - Off, One Song, or All - and then
press the v button.
Shuffling Tracks on an Audio CD
You can set the product to play tracks on an audio
CD (CD-DA/MP3) at random.
1.	 On the Playback screen, use the ▲▼◄►
buttons to select in the lower left corner
of the screen, and then press the v button.
2.	 Use the ▲▼ to set the Shuffle mode On or
Off, and then press the v button.
Creating a Playlist from an Audio CD
1.	 With the Playback screen displayed, select
the Options button, and then press the v
button. The Options menu appears.
2.	 Use the ▲▼ buttons to select Play Selected,
and then press the v button. The Selection
Play screen appears.
3.	 Use the ▲▼ buttons to select a track, and
then press the v button. A check appears
to the left of the track.
4.	 Repeat Step 3 to select and check additional
tracks.
5.	 To remove a track from the list, move to the
track, and then press the v button again.
The check on the track is removed.
6.	 When done, press the ▲▼ button to select
Play, and then press the v button. The
Music Playback screen reappears listing only
the tracks you checked. The selected tracks
play automatically.
|
| NOTEs |
\
\ You can create a playlist with up to 99 tracks on Audio
CDs (CD-DA).
\
\ If you have created a playlist, Play Selected is replaced
by Edit Playlist on the Options menu.
\
\ On the Selection Play screen, you can also choose Select
All, Clear All, and Cancel.
00:09	00:43
TRACK 001
TRACK 001	 00:43
TRACK 002	 03:56
TRACK 003	 04:41
TRACK 004	 04:02
TRACK 005	 03:43
TRACK 006	 03:40
TRACK 007	 04:06
TRACK 008	 03:52
TRACK 009	 03:04
TRACK 010	 04:02
Options
off off
English 41 |
Page: 41
Media Play
-
- Use Select All to select all tracks. This cancels
your individual track selections. When you press the
RETURN button on your remote control or select the
Play button, and then press the v button, all tracks
will appear on the Music Playback screen, and the
product will begin to play all tracks from Track 001.
-
- Use Clear All to deselect all selected tracks at once.
Then, select individual tracks or use Select All to
select all the tracks, and then press the RETURN
button on your remote control. If you do not use Select
All or select individual tracks, the Playlist will not
change.
-
- Cancel cancels any changes you made on the Play
Select screen. When you return to the Playback screen,
the Playlist will be unchanged.
Ripping
1.	 Insert a USB device into the USB jack on the
front of the product.
2.	 With the Playback screen displayed, select
the Options and then press the v button.
The Options menu appears.
3.	 Use the ▲▼ buttons to select Ripping,
and then press the v button. The Ripping
screen appears.
4.	 Use the ▲▼ buttons to select a track, and
then press the v button. A check appears
to the left of the track.
5.	 Repeat Step 4 to select and check additional
tracks.
6.	 To remove a track from the list, move to the
track, and then press the v button again.
The check on the track is removed.
7.	 When done, select the Rip button using the
▲▼ buttons, and then press the v button.
The Rip pop-up appears.
8.	 Use the ▲▼ buttons to select the device to
store the ripped files to, and then press the
v button.
|
| NOTEs |
\
\ Do not disconnect the device while ripping is in progress.
9.	 If you want to cancel ripping, press the v
button and then select Yes. Select No to
continue ripping.
10.	 When ripping is complete, the "Successfully
Ripped." message appears. Press the v
button.
11.	 Press the RETURN button or select Cancel,
and then press the v button to go back to
the Playback screen.
|
| NOTEs |
\
\ This function is not available with DTS Audio CD.
\
\ This function may not be supported by some discs.
\
\ Ripping encodes music to the .mp3 format at 192kbps.
\
\ On the Ripping screen, you can also choose Select All
and Clear All.
-
- Use Select All to select all tracks and press the v
button. This cancels your individual track selections.
-
- Use Clear All to deselect all selected tracks at once.
Playing Photo Contents
You can play photo contents located on a DVD,
USB, mobile device or PC.
Using the Tools Menu
During playback, press the TOOLS button. A
series of icons appears at the bottom of the
screen. The icons, which are shown from left to
right on the screen, are shown in the same order,
from top to bottom, in the table below.
Previous Select to move to the previous picture.
Next Select to move to the next picture.
Start / Stop
Slide Show
Select to play/pause the slide show.
| 42 English
Page: 42
05
Media
Play
Slide Show
Settings
Select the Slide Show settings.
Zoom
Select to enlarge the current picture.
(Enlarge up to 4 times)
Rotate
Select to rotate the picture. (This will
rotate the picture either clockwise or
counter clockwise.)
Background
Music
Select to listen to music while viewing
a slide show.
Settings
Select the picture mode - Dynamic,
Standard, Movie, or User - or display
information about the current picture.
|
| NOTEs |
\
\ Depending on the disc or storage device, the Tools menu
may differ or not be shown.
\
\ To enable the background music function, the photo file must
be in the same storage media as the music file.
However, the sound quality can be affected by the bit rate of
the MP3 file, the size of the photo, and the encoding method.
\
\ You can't enlarge the subtitle and PG graphic in the full
screen mode.
Using the View & Options Menus
Using the View Menu
On a file screen containing photo files, select the
View and press the v button.
Title
Displays all the photo files on the media
or storage device by title.
Date
Groups all the the photo files on the
media or storage device by date. Click a
group to see the photos in that group.
Folder
Displays all the folders on the media or
storage device.
|
| NOTEs |
\
\ Depending on the disc or storage device, the View menu
may differ or not be shown.
Using the Options Menu
On a file screen containing photo files, select the
Options and press the v button.
Slide show
Starts the slide show. Shows all the
files in the current folder, one after
another. If you want to create a slide
show with a selected group of photos,
see Play Selected below.
Play Selected
Lets you create a playlist by selecting
specific photos to see. It works
essentially the same for all media.
See Creating a Playlist from an Audio
CD on pages 41~42 for instructions.
Send
Select to upload selected files to an
on-line site (Picasa, Facebook etc) or a
device. To use this function, you need
to establish an account with the on-line
site, and then log in using the Log In
function. See Using the Send Function
on page 44.
Delete
Select to delete the a file from the
device.
|
| NOTEs |
\
\ Depending on the disc or storage device, the Options
menu may differ or not be shown.
English 43 |
Page: 43
Media Play
Using the Send Function
You can upload files to an on-line site (Picasa,
Facebook etc) or a device.
1.	 With the Photo Playback screen displayed,
select the Options button, and then press
the v button. The Options menu appears.
2.	 Use the ▲▼ buttons to select Send, and
then press the v button. The Selection
screen appears.
3.	 Use the ▲▼ buttons to select a picture, and
then press the v button. A check appears
to the left of the picture.
4.	 Repeat Step 3 to select and check additional
pictures.
5.	 To remove a picture from the list, move to the
picture, and then press the v button again.
The check on the picture is removed.
6.	 When done, press the ▲▼ button to select
Send, and then press the v button.
The Send pop-up appears listing the on-line
sites (Picassa, Facebook, etc.) or devices
that you can send the photos to.
7.	 Select a destination, and then press the v
button.
8.	 If you are sending the photos to an on-line
site, the site starts. Log in and follow the
directions on the screen.
|
| NOTEs |
\
\ To send photos to an on-line site you must have an
account with that site.
| 44 English
Page: 44
06
Network
Services
Network Services
You can enjoy various network services such as
streaming video or on-line apps by connecting the
player to your network.
To use network services, you must first:
1.	 Connect the player to the network.
(See page 18)
2.	 Configure the network settings.
(See pages 27~30)
Logging In to Your Samsung
Account
Before you access Movies & TV Shows or Apps,
we suggest you log in to your Samsung account.
|
| NOTEs |
\
\ If you do not have a Samsung account, follow the
directions in the Quick Startup Guide to create one.
To log in to your Samsung account, follow these
steps:
1.	 With the Home screen displayed, press the
RED (A) button. The Log In screen appears.
2.	 Select the Email field, and then press the v
button. The keyboard pop-up appears.
3.	 Using the keyboard, enter your e-mail
address. When finished, select the Done
button, and then press the v button. The
Log In screen re-appears.
4.	 Select the Password field, and then press the
v button. The keyboard pop-up appears.
5.	 Using the keyboard, enter your password.
When finished, select the Done button, and
then press the v button. The Log In screen
re-appears.
6.	 To make the log in process easier next time,
select Sign me in automatically, and then
press the v button.
7.	 Select Log In, and then press the v button.
The player logs you in to your account. Your
account e-mail is displayed on the bottom left
of the screen.
|
| NOTEs |
\
\ If you selected Sign me in automatically, the next time
you log in, the player will automatically enter your e-mail
and password. All you need to do is select Log In.
\
\ If your e-mail address and password are not displayed
when the Log In screen appears, select the button with
the down pointing arrow head next to the Email field, and
then press the v button. A drop down list of all your
registered accounts will appear. Select your account,
and then press the v button. The player will fill in the
e-mail and password fields.
\
\ If you press the RED (A) button after you have logged
in, the My Account pop-up appears. On the pop-up, you
can select Logout, Change account information, Link
Service Accounts, Remove Accounts from the Device,
and Deactivate Account.
\
\ To rent Films and purchase for-pay apps, you must have
a credit card registered in your account. If you haven’t
registered a card, select Change account information.
On the Change Account information page, select
Register Card, press the v button, and then follow the
directions on the screen.
Before Using Movies & TV Shows
or Apps
If you haven’t set up Smart Hub, when you use
Movies & TV Shows or Apps for the first time, the
player will ask you to perform the Smart Hub set
up procedure.
English 45 |
Page: 45
Network Services
1.	 On the Home screen, select either Movies &
TV Shows or Apps, and then press the v
button. If you have selected Apps, go to Step 4.
2.	 If you selected Movies & TV Shows, the
Smart Hub pop-up appears asking if you
want to set up Smart Hub. Select Yes, and
then press the v button. The Welcome
screen appears.
3.	 Select Start, and then press the v button.
The Smart Hub Terms & Conditions, Privacy
Policy screen appears.
4.	 On the Smart Hub Terms & Conditions,
Privacy Policy screen, you must review and
agree to both the Smart Hub Terms and
Conditions and the Privacy Policy to use
Smart Hub.
5.	 Scroll down, and then click the View details
buttons to review the full documents.
6.	 When done reading, scroll up to the first entry
field, and press the v button to agree to
the Terms and Conditions and consent to the
Privacy Policy.
7.	 Press the ► button twice to go to the
Supplemental Privacy Notices screen.
8.	 Click the View details button to view the
entire notice.
9.	 When done reading, scroll up to the top entry
field, and then press the v button.
|
| NOTEs |
\
\ You do not need to consent to the Supplemental
Privacy Notice, but one or more Smart TV features or
functionalities may not be available if you do not.
10.	 Press the ► button twice. The Setup
Complete screen appears. Press the v
button.
Using Movies & TV Shows
You can download or stream for pay and free-of-
charge films and TV shows and view them on your
TV.
1.	 On the Home screen, select Movies & TV
Shows, and then press the v button.
2.	 Select one of the Featured or Recommended
films, and then press the v button. The
page for that movie appears.
OR
Use the ▼ button to go to the bottom of
the screen. Select Favourites, Featured,
Movies, TV Shows, or Purchased, and then
press the v button.
On the page that appears, use the ▲▼◄►
buttons to select a show or movie, and then
press the v button.
On the Movies and TV Show screen, you
can also select What’s New, Most Popular,
or Genres to see more available shows or
films. On the Genre screen, use the ▲▼◄►
buttons to select a Genre, and then press the
v button.
To make a selection on a page displaying
Movies and TV Show, use the ▲▼◄►
buttons to make a selection, and then press
the v button.
Movies & TV Shows
	 Favourites	 Featured	 Movies	 TV Shows	 Purchased
Featured Recommended
| 46 English
Page: 46
06
Network
Services
3.	 To watch a selection, select Watch now, and
then press the v button. A selection screen
appears listing various locations from which
you can rent the film along with prices.
4.	 Select a location, and then press the v
button. Follow the directions on the screen to
start the movie.
|
| NOTEs |
\
\ If you haven't logged into your Samsung account, the Log
In screen will appear after Step 3 and you will need to log
in.
\
\ If you don't have a credit card associated with your
Samsung account, after you log in, the Register Card
screen will appear. Follow the directions on the screen.
You must have a credit card registered to your account to
rent Films and to purchase for-pay apps.
Using Apps
You can download applications from the Internet,
and access various for pay or free-of-charge
application and view them on your TV. To access
some applications, you need to have a Samsung
account.
The Apps Screen at a Glance
1
Recommended : Displays recommended contents
managed by Samsung.
2
My Apps : Displays your personal gallery of
applications modifiable on the More Apps screen.
3
More Apps : Select to access the More Apps
screen where you can add to, modify, and delete
applications and see all downloaded applications.
4
Featured Applications : Use the ▲▼◄► buttons
to highlight the displayed Feature Application, and
then press the v button. Information about the
featured application appears.
Downloading Applications
You can download for pay or free-of-charge
applications through Samsung Apps.
1.	 On the Apps screen, select Samsung Apps,
and then press the v button. The Samsung
Apps screen appears.
2.	 Across the top of the screen, under What’s
New, you'll see a series of new apps. Use
the ◄► buttons to scroll the list right or left,
and then select an app. Press the v button
to see more information about the app. If the
app is free, select Download, and then press
the v button to download the app.
If it is a for pay app, select Buy, press the
v button, and then follow the instructions
on the screen.
|
| NOTEs |
\
\ To buy an app, you must be logged into your Samsung
account and have a credit card registered to the account.
Press the RED (A) button on your remote to log in.
\
\ If you haven’t registered a card, after you log in, press the
RED (A) button again, and then select Change Account
Information in the pop-up that appears. On the Change
Account information page, select Register Card, press
the v button, and then follow the directions on the
screen.
\
\ You can also access and download apps from the
categories listed on the left of the screen. For instructions,
see Step 4.
TV
Samsung
	2	 3	 4	 5
	WebBrowser
More Apps
2
3
1
1
Recommended
My Apps
Apps
4
English 47 |
Page: 47
Network Services
3.	 After the app has downloaded, select Run,
and then press the v button to run the app
now. To run the app later, press the RETURN
button. In either case, the icon for the app will
appear on the Apps screen.
4.	 To see additional apps, use the ▲▼◄►
buttons to move to the category list on the
left side of the screen.
5.	 Use the ▲▼ buttons to select a category.
Each time you move the highlight to another
category, a different set of applications
appears on the right.
6.	 Use the ► button to move to the applications
and the ▲▼◄► buttons to move from app
to app.
7.	 To see more information about an app, select
it, and then press the v button.
8.	 To download the app, follow the directions in
Steps 2 and 3.
Starting an Application
1.	 Select Apps on the Home screen, and then
press the v button.
2.	 On the Apps screen, use the ▲▼◄► buttons
to select an app, and then press the v
button. The app starts.
Using the More Apps Screen
The More Apps Screen lists all the apps you have
downloaded and lets you:
•	Sort the apps on the More Apps screen by Date
downloaded, Recently opened, and Title.
•	Apply a number of Options Menu functions to
the apps listed in the My Apps section of the
Apps screen including updating apps, moving
apps into a folder, deleting the apps from My
Apps, and locking the apps.
•	Start apps.
Sorting the Apps
To sort the apps on the More Apps screen, follow
these steps:
1.	 On the Home screen, select Apps, and then
press the v button.
2.	 On the Apps screen, use the ▼ button
to move to the More Apps hotspot at the
bottom of the page, and then press the v
button.
3.	 On the More Apps screen, use the ▲►
buttons to move to View at the top of the
screen, and then press the v button.
4.	 In the drop down that appears, select Date
Downloaded, Recently Opened, or Title,
and then press the v button. The apps
on the More Apps screen are sorted by the
criteria you have chosen.
Using the Options Menu Functions
Lock/Unlock
Using the Lock/Unlock function and the Security
PIN, you can lock applications so they cannot
be started on either the Apps screen or the More
Apps screen. The default PIN is 0000.
1.	 On the More Apps screen, use the ▲►
buttons to go to Options at the top of the
screen, and then press the v button.
More Apps
	 WebBrowser	App2	 App3
	 App4	App5	App6
	 App7	App8	App9
WebBrowser
Category : Basic | Version : X.XXX | Size : XX.XKB
Contact Info : admin@samsung.com (If you need to contact us, please use this address.)
View : Date Downloaded Options
1 / 9
Storage	
XX MB / XXX MB
| 48 English
Page: 48
06
Network
Services
2.	 Select Lock/Unlock, and then press the v
button.
3.	 When the Lock service appears, enter the
PIN using the number buttons on your remote
control.
4.	 To lock an application, select the application,
and then press the v button. A lock
appears on the app. Repeat to lock other,
individual apps.
5.	 To unlock a locked app, select the
application, and then press the v button.
6.	 To lock all the apps at once, use the ▲►
buttons to select the Lock All button, and
then press the v button.
7.	 To unlock all the locked apps at once, use the
▲► buttons to select the Unlock All button
and then press the v button.
8.	 Press the RETURN button twice to return to
the Apps screen. Locked apps will display a
lock on the upper right side.
Edit My Apps
Edit My Apps lets you add apps to and delete
apps from My Apps. It also lets you change the
position of an app in My Apps.
Add an App to My Apps
1.	 On the More Apps screen, use the ▲►
buttons to go to Options at the top of the
screen, and then press the v button.
2.	 Select Edit My Apps, and then press the v
button. The Edit My Apps screen appears.
3.	 Select a full colour app from the top row of
apps, and then press the v button. The
full colour app icon appears in the My Apps
area below and the app icon in the top row is
grayed out.
|
| NOTEs |
\
\ Grayed out apps are already in My Apps.
4.	 When you return to the Apps screen, the app
will appear in the My Apps area.
Delete an App from My Apps
1.	 On the More Apps screen, use the ▲►
buttons to go to Options at the top of the
screen, and then press the v button.
2.	 Select Edit My Apps, and then press the v
button. The Edit My Apps screen appears.
3.	 Select the app you want to delete from My
Apps, press the v button, and then press
the ▲▼◄► button in the direction of the X.
The Remove from My Apps pop-up appears.
4.	 Select Yes, and then press the v button.
5.	 When you return to the Apps screen, the app
will have been removed from the My Apps
area.
Move an App in My Apps
1.	 On the More Apps screen, use the ▲►
buttons to go to Options at the top of the
screen, and then press the v button.
2.	 Select Edit My Apps, and then press the v
button. The Edit My Apps screen appears.
3.	 Select the app you want to move in My Apps,
press the v button, and then press the
▲▼◄► button to move the app icon in the
direction of one of the arrows (<, >, ^, etc.)
that appears around the app icon. The app
icon moves in the direction you have chosen.
4.	 After you have placed the app icon where
you want, press the v button.
5.	 When you return to the Apps screen, the
app will be positioned in the location you had
selected.
English 49 |
Page: 49
Network Services
Create Folder
Create Folder lets you create a folder on the More
Apps screen into which you can put apps.
1.	 On the More Apps screen, use the ▲►
buttons to go to Options at the top of the
screen, and then press the v button.
2.	 Select Create Folder, and then press the
v button. The Set Folder Name pop-up
appears.
3.	 Press the v button. The keyboard appears.
4.	 Select the Clear button on the right side,
and then press the v button to remove
Folder 1 from the entry field. Then, using the
keyboard, enter the name you want to apply
to the folder.
5.	 When finished, select the Done button on the
right side, and then press the v button.
The pop-up reappears.
6.	 Select OK, and then press the v button.
The new folder appears in the list of apps on
the left side of the screen.
Move to Folder
Move to Folder lets you move apps to the folder of
your choice.
1.	 On the More Apps screen, use the ▲►
buttons to go to Options at the top of the
screen, and then press the v button.
2.	 Select Move to Folder, and then press
the v button. The Move to Folder screen
appears.
3.	 Use the ▲▼◄► buttons to move to an app,
and then press the v button to select the
app. A check appears in the upper left corner
of the app.
4.	 To deselect an app, press the v button.
The check disappears.
5.	 Repeat Step 3 to select additional apps.
|
| NOTEs |
\
\ To select all the downloaded apps, select Select All at the
top right of the screen, and then press the v button. To
deselect all the apps, select Deselect All at the top right
of the screen, and then press the v button.
6.	 When done, select Select folder at the top
of the screen, and then press the v button.
The Select folder pop-up appears.
7.	 In the Select folder pop-up, use the ▲▼
buttons to select the folder you want to move
the apps you selected to and then press the
v button.
8.	 The Apps Moved pop up appears. Press the
v button.
9.	 To open a folder, use the ▲▼◄► buttons to
highlight the folder, and then press the v
button.
Rename Folder
Rename Folder lets you rename an existing folder.
1.	 On the More Apps screen, use the ▲►
buttons to go to Options at the top of the
screen, and then press the v button.
2.	 Select Rename Folder, and then press
the v button. The Rename Folder screen
appears, and a folder is highlighted.
3.	 User the ▲▼◄► buttons to highlight a
folder of your choice, and then press the v
button. The Rename pop-up appears.
4.	 Press the v button. The keyboard appears.
5.	 Enter the new name for the folder. When
finished, select Done on the right side, and
then press the v button. The Rename pop-
up reappears displaying the new name.
6.	 Select OK, and then press the v button.
The folder is renamed.
7.	 Select Close on the right side of the screen,
and then press the v button.
| 50 English

Question & answers

There are no questions about the Samsung BD-F6500 yet.

Ask a question about the Samsung BD-F6500

Have a question about the Samsung BD-F6500 but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Samsung BD-F6500. Please make sure that you describe your difficulty with the Samsung BD-F6500 as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.