Samsung BD-ES6000 manual

View a manual of the Samsung BD-ES6000 below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Samsung
  • Product: Blu-ray player
  • Model/name: BD-ES6000
  • Filetype: PDF
  • Available languages: Dutch, English, German, French, Italian

Table of Contents

Page: 0
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service,
please register your product at
www.samsung.com/register
Blu-ray™ Disc Player
user manual
BD-ES6000
BD-ES6000E
02235G-BD-ES6000,6000E-XN-ENG.indd 1 2012-03-21 오후 2:38:46
Page: 1
Safety Information
Do not install this equipment in a confined space
such as a bookcase or similar unit.
WARNING
To prevent damage which may result in fire
or electric shock hazard, do not expose this
appliance to rain or moisture.
CAUTION
Blu-ray Disc Player USES AN INVISIBLE LASER
BEAM WHICH CAN CAUSE HAZARDOUS
RADIATION EXPOSURE IF DIRECTED. BE SURE
TO OPERATE Blu-ray Disc Player CORRECTLY
AS INSTRUCTED.
CAUTION
THIS PRODUCT UTILIZES A LASER. USE
OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY RESULT
IN HAZARDOUS RADIATION EXPOSURE. DO
NOT OPEN COVERS AND DO NOT REPAIR
YOURSELF. REFER SERVICING TO QUALIFIED
PERSONNEL.
This product satisfies CE regulations when
shielded cables and connectors are used to
connect the unit to other equipment. To prevent
electromagnetic interference with electric
appliances, such as radios and televisions, use
shielded cables and connectors for connections.
IMPORTANT NOTE
The mains lead on this equipment is supplied with
a molded plug incorporating a fuse. The value of
the fuse is indicated on the pin face of the plug.
If it requires replacing, a fuse approved to BS1362
of the same rating must be used.
Never use the plug with the fuse cover omitted
if the cover is detachable. If a replacement fuse
cover is required, it must be of the same colour as
the pin face of the plug. Replacement covers are
available from your dealer.
If the fitted plug is not suitable for the power points
in your house or the cable is not long enough to
reach a power point, you should obtain a suitable
safety approved extension lead or consult your
dealer for assistance.
However, if there is no alternative to cutting off the
plug, remove the fuse and then safely dispose of
the plug. Do not connect the plug to a mains jack,
as there is a risk of shock hazard from the bared
flexible cord.
To disconnect the apparatus from the mains, the
plug must be pulled out from the mains socket,
therefore the mains plug shall be readily operable.
The product unit accompanying this user manual
is licenced under certain intellectual property rights
of certain third parties.
| 2 English
Warning
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates "dangerous voltage"
inside the product that presents a risk of
electric shock or personal injury.
CAUTION:TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK)
NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol indicates important instructions
accompanying the product.
02235G-BD-ES6000,6000E-XN-ENG.indd 2 2012-03-21 오후 2:38:46
Page: 2
01
Safety
Information
CLASS 1 LASER PRODUCT
This Compact Disc player is classified as a CLASS
1 LASER product. Use of controls, adjustments
or performance of procedures other than those
specified herein may result in hazardous radiation
exposure.
CAUTION :
•	CLASS 3B VISIBLE AND INVISIBLE LASER
RADIATION WHEN OPEN. AVOID EXPOSURE
TO THE BEAM (IEC 60825-1)
•	THIS product UTILIZES A LASER. USE
OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION
EXPOSURE. DO NOT OPEN COVER AND DO
NOT REPAIR YOURSELF. REFER SERVICING
TO QUALIFIED PERSONNEL.
CLASS 1	 LASER PRODUCT
KLASSE 1	 LASER PRODUKT
LUOKAN 1	 LASER LAITE
KLASS 1 	 LASER APPARAT
PRODUCTO	 LÁSER CLASE 1
Precautions
Important Safety Instructions
Read these operating instructions carefully before
using the unit. Follow all the safety instructions
listed below.
Keep these operating instructions handy for future
reference.
1.	 Read these instructions.
2.	 Keep these instructions.
3.	 Heed all warnings.
4.	 Follow all instructions.
5.	 Do not use this apparatus near water.
6.	 Clean only with a dry cloth.
7.	 Do not block any ventilation openings. Install
in accordance with the manufacturer's
instructions.
8.	 Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including AV receivers) that
produce heat.
9.	 Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade
or the third prong are provided for your safety.
If the provided plug does not fit into your
outlet, consult an electrician for replacement
of the obsolete outlet.
10.	 Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where it exits the
apparatus.
11.	 Only use attachments/accessories specified
by the manufacturer.
12.	 Use only with the cart,
stand, tripod, bracket,
or table specified by the
manufacturer, or sold with
the apparatus. When a cart
is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
13.	 Unplug this apparatus during lightning storms
or when unused for long periods of time.
14.	 Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way,
such as when the power-supply cord or plug
is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does
not operate normally, or has been dropped.
English 3 |
02235G-BD-ES6000,6000E-XN-ENG.indd 3 2012-03-21 오후 2:38:47
Page: 3
Safety Information
Disc Storage & Management
•	Holding Discs
-
- Fingerprints or scratches on
a disc may reduce sound and
picture quality or cause skipping
-
- Avoid touching the surface of a disc where
data has been recorded.
-
- Hold the disc by the edges so that fingerprints
will not get on the surface.
-
- Do not stick paper or tape on the disc.
•	Cleaning Discs
-
- If you get fingerprints or dirt on a
disc, clean it with a mild detergent
diluted in water and wipe with a
soft cloth.
-
- When cleaning, wipe gently from the inside to
the outside of the disc.
•	Disc Storage
`
` Do not keep in direct sunlight.
`
` Keep in a cool ventilated area.
`
` Keep in a clean protection jacket and store
vertically.
Handling Cautions
•	Do not expose this apparatus to dripping or
splashing. Do not put objects filled with liquids,
such as vases on the apparatus.
•	To turn this apparatus off completely, you must
pull the power plug out of the wall socket.
Consequently, the power plug must be easily
and readily accessible at all times.
•	Do not plug multiple electric devices into the
same wall socket. Overloading a socket can
cause it to overheat, resulting in a fire.
•	Maintenance of Cabinet.
-
- Before connecting other components to this
player, be sure to turn them off.
-
- If you move your player suddenly from a cold
place to a warm place, condensation may
occur on the operating parts and lens and
cause abnormal disc playback. If this occurs,
unplug the player, wait for two hours, and
then connect the plug to the power outlet.
Then, insert the disc, and try to play back
again.
•	If the product makes an abnormal noise or
produces a burning smell or smoke, turn off
the power switch immediately and disconnect
the power plug from the wall outlet. Then,
contact the nearest customer service centre for
technical assistance. Do not use the product.
Using the product as it is may cause a fire or an
electric shock.
Using the 3D function
IMPORTANT HEALTH AND SAFETY
INFORMATION FOR 3D PICTURES.
Read and understand the following safety
information before using the 3D function.
•	Some viewers may experience discomfort while
viewing 3D TV such as dizziness, nausea, and
headaches.
If you experience any such symptom, stop
viewing 3D TV, remove the 3D Active Glasses,
and rest.
•	Watching 3D images for an extended period of
time may cause eye strain. If you feel eye strain,
stop viewing 3D TV, remove your 3D Active
Glasses, and rest.
•	A responsible adult should frequently check on
children who are using the 3D function.
If there are any reports of tired eyes, headaches,
dizziness, or nausea, have the child stop viewing
3D TV and rest.
•	Do not use the 3D Active Glasses for other
purposes (Such as general eyeglasses,
sunglasses, protective goggles, etc.)
| 4 English
02235G-BD-ES6000,6000E-XN-ENG.indd 4 2012-03-21 오후 2:38:49
Page: 4
01
Safety
Information
•	Do not use the 3D function or 3D Active Glasses
while walking or moving around. Using the 3D
function or 3D Active Glasses while moving
around may cause you to bump into objects,
trip, and/or fall, and cause serious injury.
•	If you want to enjoy 3D content, connect a 3D
device (3D compliant AV receiver or TV) to the
player's HDMI OUT port using a high-speed
HDMI cable. Put on 3D glasses before playing
the 3D content.
•	The player outputs 3D signals only through
HDMI cable connected to the HDMI OUT port.
•	As the video resolution in 3D play mode is fixed
according to the resolution of the original 3D
video, you can not change the resolution to your
preference.
•	Some functions such as BD Wise, screen size
adjustment, and resolution adjustment may not
operate properly in 3D play mode.
•	You must use a high-speed HDMI cable for
proper output of the 3D signal.
•	Stay at least three times the width of the screen
from the TV when watching 3D images. For
example, if you have a 46-inch screen, stay 138
inches (11.5 feet) from the screen.
•	Place the 3D video screen at eye level for the
best 3D picture.
•	When the player is connected to some 3D
devices, the 3D effect may not function properly.
•	This player does not convert 2D content into
3D.
•	"Blu-ray 3D" and "Blu-ray 3D" logo are
trademarks of the Blu-ray Disc Association.
Copyright
© 2012 Samsung Electronics Co.,Ltd.
All rights reserved; No part or whole of this user's
manual may be reproduced or copied without the
prior written permission of Samsung Electronics
Co.,Ltd.
English 5 |
02235G-BD-ES6000,6000E-XN-ENG.indd 5 2012-03-21 오후 2:38:49
Page: 5
Contents
| 6 English
Safety Information
2	 Warning
3	 Precautions
3	 Important Safety Instructions
4	 Disc Storage & Management
4	 Handling Cautions
4	 Using the 3D function
5	 Copyright
Getting Started
8	 Disc and Format Compatibility
8	 Disc types and contents your player can
play
8	 Disc types your player cannot play
9	 Region Code
9	 Logos of Discs the player can play
10	 Supported Formats
12	 Accessories
13	 Front Panel
13	 Rear Panel
14	 Remote Control
14	 Tour of the Remote Control
Connections
15	 Connecting to a TV
16	 Connecting to an Audio System
16	 Method 1 Connecting to an HDMI
supported AV receiver
16	 Method 2 Connecting to an AV receiver
with Dolby Digital or DTS decoder
17	 Connecting to a Network Router
17	 Wired Network
17	 Wireless Network
Settings
18	 The Initial Settings Procedure
18	 The Home Screen
19	 Accessing the Settings Screen
19	 Buttons on the Remote Control Used for
the Settings Menu
20	 Settings Menu Functions
25	 Networks and the Internet
25	 Configuring Your Network Connection
27	 Wi-Fi Direct
28	 Soft AP
29	 AllShare Settings
29	 Upgrading Software
29	 By Online
30	 By USB
30	 By Disc
30	 By Downloaded
31	 Standby Mode Upgrade
Media Play
32	 Playing Commercial Video Discs
32	 The AllShare Play Screen
32	 Accessing the AllShare Play Screen
32	 The AllShare Play Screen at a Glance
32	 Playing Files on a USB Device or USB
Compatible Mobile Phone
33	 Playing Commercial Audio Discs
33	 Music Screen Controls
34	 Playing a Disc with User Recorded
Content
34	 Using the AllShare Network Function
34	 To Download the AllShare Software
35	 Playing Content Located on Your PC or
DLNA Device through the Blu-ray Disc
Player
35	 Controlling the Playback of Content
Located on Your PC with Your Smart
Phone
02235G-BD-ES6000,6000E-XN-ENG.indd 6 2012-03-21 오후 2:38:49
Page: 6
Contents
English 7 |
Network Services
43	 Using Smart Hub
43	 Smart Hub at a Glance
44	 Using the Web Browser
45	 BD-LIVE™
Appendix
46	 Compliance and Compatibility Notice
47	 Copy Protection
47	 Network Service Disclaimer
48	 Licence
50	 Additional Information
50	Note
52	 Resolution according to the contents type
53	 Digital Output Selection
54	 Troubleshooting
56	Repairs
57	 Specifications
36	 Controlling Video Playback
36	 Buttons on the Remote Control used for
Video Playback
36	 Using the Tools Menu
38	 Controlling Music Playback
38	 Buttons on the Remote Control used for
Music Playback
38	 Using the Tools Menu
38	 Repeating Tracks on an Audio CD
38	 Shuffling Tracks on an Audio CD
39	 Creating a Playlist from a CD
39	Ripping
40	 Playing Photo Contents
40	 Using the Tools Menu
40	 Using the Tools Menu when a file
is highlighted
02235G-BD-ES6000,6000E-XN-ENG.indd 7 2012-03-21 오후 2:38:50
Page: 7
Getting Started
Disc and Format Compatibility
Disc types and contents your player can play
Media Disc Type Details
VIDEO
Blu-ray Disc
3D Blu-ray Disc
BD-ROM or BD-RE/-R recorded in the BD-RE format.
DVD-VIDEO
DVD-RW
DVD-R
DVD+RW
DVD+R
DVD-VIDEO, recorded DVD+RW/DVD-RW(V)/DVD-R/+R that have been recorded and
finalized, or a USB storage media containing DivX, MKV, MP4 contents.
MUSIC
CD-RW/-R,
DVD-RW/-R,
BD-RE/-R
Music recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R or a USB storage media
containing MP3 or WMA contents.
PHOTO
CD-RW/-R,
DVD-RW/-R,
BD-RE/-R
Photos recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R or a USB storage media
containing JPEG contents.
|
| NOTE |
\
\ The player may not play certain CD-RW/-R and DVD-R because of the disc type or recording conditions.
\
\ If a DVD-RW/-R has not been recorded properly in DVD video format, it will not be playable.
\
\ Your player will not play content that has been recorded on a DVD-R at a bit-rate that exceeds 10 Mbps.
\
\ Your player will not play content that has been recorded on a BD-R or USB device at a bit rate that exceeds 25 Mbps.
\
\ Playback may not work for some types of discs, or when you use specific functions, such as angle change and aspect ratio
adjustment. Information about the discs is written in detail on the disc box. Please refer to this if necessary.
\
\ When you play a BD-J title, loading may take longer than a normal title or some functions may perform slowly.
Disc types your player cannot play
•	HD DVD
•	DVD-ROM/PD/
MV, etc
•	DVD-RAM
•	Super Audio CD
(except CD layer)
•	DVD-RW(VR mode)
•	CVD/CD-ROM/CDV/
CD-G/CD-I/LD
(CD-Gs play audio only,
not graphics.)
•	3.9 GB DVD-R for
Authoring.
| 8 English
02235G-BD-ES6000,6000E-XN-ENG.indd 8 2012-03-21 오후 2:38:50
Page: 8
02
Getting
Started
Region Code
Both players and discs are coded by region.
These regional codes must match for a disc to
play. If the codes do not match, the disc will not
play.
The Region Number for this player is displayed on
the rear panel of the player.
Disc Type
Region
Code
Area
Blu-ray Disc
a
North America, Central America,
South America, Korea, Japan,
Taiwan, Hong Kong and South
East Asia.
b
Europe, Greenland, French
territories, Middle East, Africa,
Australia and New Zealand.
c India, China, Russia, Central and
South Asia.
DVD-VIDEO
1 The U.S., U.S. territories and
Canada
2 Europe, Japan, the Middle East,
Egypt, South Africa, Greenland
3 Taiwan, Korea, the Philippines,
Indonesia, Hong Kong
4
Mexico, South America,
Central America, Australia,
New Zealand, Pacific Islands,
Caribbean
5
Russia, Eastern Europe, India,
most of Africa, North Korea,
Mongolia
6 China
Logos of Discs the player can play
Blu-ray Disc 3D Blu-ray Disc
BD-LIVE DivX
PAL broadcast System in U.K.,
France, Germany, etc.
English 9 |
02235G-BD-ES6000,6000E-XN-ENG.indd 9 2012-03-21 오후 2:38:53
Page: 9
Getting Started
Supported Formats
Video File Support
File Extension Container Video Codec Resolution
Frame rate
(fps)
Bit rate (Mbps) Audio Codec
*.avi
*.mkv
*.asf
*.wmv
*.mp4
*.3gp
*.vro
*.mpg
*.mpeg
*.ts
*.tp
*.trp
AVI
MKV
ASF
MP4
3GP
VRO
VOB
PS
TS
DivX 3.11/4.x/
5.x/6.1
1920x1080
6~30
20
Dolby Digital
LPCM
AAC
HE-AAC
WMA
DD+
MP3
DTS
MPEG4 SP/ASP
H.264 BP/
MP/HP
25
Window Media
Video v9
1920x1080 25
MPEG2 24/25/30
MPEG1 352x288 24/25/3 20
`
` Limitations
-
- Even when a file is encoded by a supported codec listed above, the file might not be played if its
content is defective or corrupted.
-
- Normal playback is not guaranteed if the file's container information is wrong or the file itself is
corrupted.
-
- Files having higher bit or frame rates than standard may stutter when played back.
-
- The seek (skip) function is not available if the file's index table is damaged.
-
- When you playback a file remotely through a network connection, video playback may stutter
depending on the network speed.
-
- Some USB/Digital camera devices may not be compatible with the player.
`
` Video decoder
-
- Supports up to H.264 Level 4.1
-
- Does not support GMC 2 or higher
`
` Audio decoder
-
- Supports WMA 7, 8, 9 and STD
-
- Does not support WMA 9 PRO multi-channel or lossless audio if the number of channels is more than 2.
-
- Does not support WMA sampling rate of 22050Hz mono.
| 10 English
02235G-BD-ES6000,6000E-XN-ENG.indd 10 2012-03-21 오후 2:38:53
Page: 10
02
Getting
Started
`
` Comments
-
- MPEG4 : Supports up to GMC 1-Warping Point.
-
- H.264 : Supports up to BP/MP/HP Level 4.1.
-
- WMV : Supports V9, VC1 SP/MP/AP L3.
-
- MPEG1 : Does not support D-picture.
-
- MPEG2 : Supports up to Hight Profile High
Level.
Ğ
Ğ Supported DivX subtitle file formats
*.ttxt, *.smi, *.srt, *.sub, *.txt
|
| NOTE |
\
\ Some DivX, MKV and MP4 format discs may not play,
depending on their video resolution and frame rate.
Music File Support
File
Extension
Container
Audio
Codec
Support Range
*.mp3 MP3 MP3 -
*.wma WMA WMA
*	Sampling rates (in 	
	 kHz) - 8, 11, 16, 	
	 22, 32, 44.1, 48
*	Bit rates - All bit-	
	 rates in the range 	
	 5kbps to 384kbps
Notes on the USB connection
•	Your player supports USB storage media, MP3
players, digital cameras, and USB card readers.
•	Some USB/digital camera devices may not be
compatible with the player.
•	Your player supports the FAT16, FAT32, and
NTFS files systems.
•	Connect USB devices directly to the player's
USB port. Connecting through a USB cable
may cause compatibility problems.
•	Inserting more than one memory device into
a multi-card reader may cause the reader to
operate improperly.
•	The player does not support the PTP protocol.
•	Do not disconnect a USB device during a
"loading" process.
•	The bigger the image resolution, the longer the
image takes to display.
•	This player cannot play MP3 files with DRM
(Digital Rights Management) downloaded from
commercial sites.
•	Your player only supports video that is under
30fps (frame rate).
•	Your player only supports USB Mass Storage
Class (MSC) devices such as thumb drives and
USB HDD. (HUB is not supported.)
•	Certain USB HDD Devices, multi-card readers
and thumb drives may not be compatible with
this player.
•	If some USB devices require excessive power,
they may be limited by the circuit safety device.
•	If playback from a USB HDD is unstable, provide
additional power by plugging the HDD into a
wall socket.
If the problem continues, contact the USB HDD
manufacturer.
•	You must remove the USB storage device
safely. (by performing the "Safely Remove
USB" function to prevent possible damage to
the USB memory.)
Press the HOME button to move to the home
screen, press the YELLOW (C) button, and
then press the v button.
•	SAMSUNG is not responsible for any data file
damage or data loss.
•	Your player does not support compression file,
sparse file and encryption file of NTFS.
-
- Before disconnecting a USB device, please
use USB Safety Removal.
-
- If you don't use USB Safety Removal, your
data on USB device can be corrupted or lost
-
- You can repair or format a USB device on
your Desktop PC. (MS-Windows OS only)
English 11 |
02235G-BD-ES6000,6000E-XN-ENG.indd 11 2012-03-21 오후 2:38:53
Page: 11
Getting Started
AVCHD (Advanced Video Codec High Definition)
•	This player can play back AVCHD format discs. These discs are normally recorded and used in
camcorders.
•	The AVCHD format is a high definition digital video camera format.
•	The MPEG-4 AVC/H.264 format compresses images with greater efficiency than the conventional
image compressing format.
•	Some AVCHD discs use the "x.v.Color" format. This player can play back AVCHD discs that use
"x.v.Color" format.
•	"x.v.Color" is a trademark of Sony Corporation.
•	"AVCHD" and the AVCHD logo are trademarks of Matsushita Electronic Industrial Co., Ltd. and Sony
Corporation.
|
| NOTE |
\
\ Some AVCHD format discs may not play, depending on the recording conditions.
AVCHD format discs need to be finalized.
\
\ "x.v.Color" offers a wider colour range than normal DVD camcorder discs.
Accessories
Check for the supplied accessories shown below.
Batteries for Remote Control (AAA Size) Adapter
PANDORA DIGITAL SUBTITLE INPUT
HOME
1
4
7
VOL+
2
5
8
0
VOL–
3
6
9
SOURCE
DISC MENU
HOME REPEAT
TITLE MENU
VOL VOL
POPUP
A B C D
BONUS SUBTITLE FULL
SCREEN
SAMSUNG TV
SMART
HUB
– +
INFO
TOOLS
RETURN EXIT
AUDIO
VIEW
User Manual Remote Control
| 12 English
02235G-BD-ES6000,6000E-XN-ENG.indd 12 2012-03-21 오후 2:38:55
Page: 12
02
Getting
Started
Front Panel
|
| NOTE |
\
\ When the player displays the Blu-ray Disc menu, you cannot start the movie by pressing the Play button on the player or the
remote. To play the movie, you must select Play Movie or Start in the disc menu, and then press the v button.
\
\ Lights when this player is in Standby mode, and it flashes while a signal is being received from the remote control sensor.
Rear Panel
|
| NOTE |
\
\ To upgrade the player's software through the USB Host jack, you must use a USB memory stick.
STANDBY INDICATOR
REMOTE CONTROL SENSOR
DISC SLOT
EJECT BUTTON
POWER BUTTON
STOP BUTTON PLAY/PAUSE BUTTON
USB HOST DC 12V 2A
LAN
DIGITAL AUDIO OUT
HDMI OUT
English 13 |
02235G-BD-ES6000,6000E-XN-ENG.indd 13 2012-03-21 오후 2:38:55
Page: 13
Getting Started
Remote Control
Tour of the Remote Control
Installing batteries
|
| NOTE |
\
\ If the remote does not operate properly:
-
- Check the polarity +/– of the batteries.
-
- Check if the batteries are drained.
-
- Check if the remote sensor is blocked by obstacles.
-
- Check if there is any fluorescent lighting nearby.
|
| CAUTION |
\
\ Dispose of batteries according to local environmental
regulations. Do not put them in the household trash.
PANDORA DIGITAL SUBTITLE INPUT
HOME
1
4
7
VOL+
2
5
8
0
VOL–
3
6
9
SOURCE
DISC MENU
HOME REPEAT
TITLE MENU
VOL VOL
POPUP
A B C D
BONUS SUBTITLE FULL
SCREEN
SAMSUNG TV
SMART
HUB
– +
INFO
TOOLS
RETURN EXIT
AUDIO
VIEW
Press to eject a disc.
After setup, allows you to set the input
source on your TV.
(This button is only available in samsung TV.)
Turn the player on and off.
Return to the previous menu.
These buttons are used both for menus
on the player and also several Blu-ray Disc
functions.
Press numeric buttons to operate options.
Use to enter the disc menu.
Press to skip backwards or forwards. Press to search backwards or forwards.
Use to access various audio functions on a
disc.
Press to use Smart Hub.
Press to stop a disc.
Press to move to the home menu.
Turn the TV on and off.
(This button is only available in samsung TV.)
TV volume adjustment.
(This button is only available in samsung TV.)
Press to pause a disc.
Press to play a disc.
Press to switch the Blu-ray Disc/DVD's
subtitle language.
Press to use the Tools menu.
Use to display the playback information.
Use to select menu items and change
menu values.
Press to exit the menu.
Use to enter the Popup menu/Title menu.
Press to use repeat function.
Press to use bonusview function. Press to use full screen function.
| 14 English
02235G-BD-ES6000,6000E-XN-ENG.indd 14 2012-03-21 오후 2:38:56
Page: 14
03
Connections
Connections
Connecting to a TV
Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI
IN jack on your TV.
-
- Do not connect the power cord to the wall outlet until you have made all the other connections.
-
- When you change the connections, turn off all devices before you start.
|
| NOTE |
\
\ If you use an HDMI-to-DVI cable to connect to your display device, you must also connect the Digital Audio Out on the player
to an audio system to hear audio.
\
\ An HDMI cable outputs digital video and audio, so you don't need to connect an audio cable.
\
\ Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of your TV.
\
\ When you connect the player to your TV using the HDMI cable or to a new TV, and then turn it on for the first time, the player
automatically sets the HDMI output resolution to the highest supported by the TV.
\
\ A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Colour to Off in the menu.
\
\ To view video in the HDMI 720p, 1080i, or 1080p output mode, you must use a High speed (category 2) HDMI cable.
\
\ HDMI outputs only a pure digital signal to the TV.
If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on the screen.
Audio
Video
English 15 |
02235G-BD-ES6000,6000E-XN-ENG.indd 15 2012-03-21 오후 2:38:57
Page: 15
Connections
Connecting to an Audio System
You can connect the Blu-ray player to an the audio system using the method illustrated below.
-
- Do not connect the power cord to the wall outlet until you have made all the other connections.
-
- When you change the connections, turn off all devices before you start.
Method 1 Connecting to an HDMI supported AV receiver
•	Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the
HDMI IN jack on your receiver.
•	Best quality (Recommended)
Method 2 Connecting to an AV receiver with Dolby Digital or DTS decoder
•	Using a digital Optical cable (not supplied), connect the Optical Digital Audio Out jack on the product to
the Digital Optical In jack of the receiver.
•	Good quality
•	You will hear sound only through the front two speakers with Digital Output set to PCM.
Audio
Method 2
Audio
Method 1
| 16 English
02235G-BD-ES6000,6000E-XN-ENG.indd 16 2012-03-21 오후 2:38:57
Page: 16
03
Connections
Connecting to a Network Router
You can connect your player to your network
router using one of the methods illustrated below.
To use the AllShare network functionality, you
must connect your PC to your network as shown
in the illustrations.
The connection can be wired or wireless.
Wired Network
|
| NOTE |
\
\ Internet access to Samsung's software update server
may not be allowed, depending on the router you use or
your ISP's policy. For more information, contact your ISP
(Internet Service Provider).
\
\ DSL users, please use a router to make a network
connection.
Wireless Network
|
| NOTE |
\
\ If your wireless router supports DHCP, this player can use
a DHCP or static IP address to connect to the wireless
network.
\
\ Set your wireless router to Infrastructure mode. Ad-hoc
mode is not supported.
\
\ The player supports only the following wireless security
key protocols:
-
- WEP (OPEN/SHARED), WPA-PSK (TKIP/AES),
WPA2-PSK (TKIP/AES)
\
\ Select a channel on the wireless router that is not
currently being used. If the channel set for the wireless
router is currently being used by another device nearby, it
will result in interference and communication failure.
\
\ If you select the Pure High-throughput (Greenfield)
802.11n mode and set the Encryption type on your router
or router to WEP, TKIP or TKIP-AES (WPS2Mixed), the
player will not support a connection in compliance with
new Wi-Fi certification specifications.
\
\ Wireless LAN, by its nature, may cause interference,
depending on the operating conditions (router
performance, distance, obstacles, interference by other
radio devices, etc).
Broadband
service
Broadband
service
Broadband modem
(with integrated router)
Broadband
modem
Router
Or
Broadband
service
Wireless Router
English 17 |
02235G-BD-ES6000,6000E-XN-ENG.indd 17 2012-03-21 오후 2:38:58
Page: 17
Settings
The Initial Settings Procedure
•	The Home screen will not appear if you do not
configure the initial settings.
•	The OSD (On Screen Display) may change in this
player after you upgrade the software version.
•	The access steps may differ depending on the menu
you selected.
The Initial Settings Procedure lets you set the OSD
and menu languages, configure the connection
to your home network, choose the aspect ratio
output (screen size and format) that is correct for
your TV, and apply an upgrade to your player's
software, if one is available.
|
| NOTE |
\
\ If you skip Network Setup during the Initial Settings
procedure, you can configure your network settings later.
See "Configuring Your Network Connection" on pages
25~27 for instructions.
\
\ If you want to display the Initial Settings screen again and
make changes, select Settings > System > Initial Settings
in the Home screen or select the Reset option. (See pages
22 or 24)
\
\ If you want to use an Anynet+(HDMI-CEC) function,
please follow the instructions below.
1)	 Connect the player to an Anynet+(HDMI-CEC)-
compliant Samsung TV using HDMI Cable.
2)	 Set the Anynet+(HDMI-CEC) feature to On in both the
TV and the player.
3)	 Set the TV to the Initial Settings Procedure.
The Home Screen
1
Smart Hub : Starts Smart Hub. From Smart Hub,
you can access YouTube, games, and other apps.
2
AllShare Play : Play videos, photos or music
content from Disc, USB, PC or mobile devices.
3
Settings : Set various functions to suit your
personal preferences.
`
` Selecting an Option on the Home Screen
1.	 To select an option on the Home screen,
move the cursor using the ◄► buttons until
it highlights the option of your choice, and
then press the v button.
|
| NOTE |
\
\ If you leave the player in the stop mode for more than
5 minutes without using it, a screen saver will appear on
your TV. If the player is left in the screen saver mode for
more than 20 minutes, the power will automatically turn
off.
Smart Hub AllShare Play
Set various functions to suit your personal preferences.
1 3
Settings
2
| 18 English
02235G-BD-ES6000,6000E-XN-ENG.indd 18 2012-03-21 오후 2:38:59
Page: 18
04
Settings
Accessing the Settings Screen
1.	 Select Settings on the Home screen, and
then press v button. The Settings screen
appears.
2.	 To access the menus, sub-menus, and
options on the Settings screen, please refer
to the remote control illustration below.
Buttons on the Remote Control Used
for the Settings Menu
1 HOME Button : Press to move to the Home screen.
2 RETURN Button : Return to the previous menu.
3
v (Enter) / DIRECTION Buttons :
•	Press ▲▼◄► to move the cursor or select an
item.
•	Press the v button to activate the currently
selected item or confirm a setting.
4 EXIT Button : Press to exit the current menu.
Detailed Function Information
Each Settings function, menu item, and individual
option is explained in detail on-screen. To view an
explanation, use the ▲▼◄► buttons to select the
function, menu item, or option. The explanation
will usually appear on the right side of the screen.
A short description of each Settings function
starts on the next page. Additional information on
some of the functions is also in the Appendix of
this manual.
Display
3D Settings
TV Aspect Ratio	 16:9 Original
Smart Hub Screen Size	 Size 3
BD Wise	 On
Resolution	Auto
Movie Frame (24Fs)	 Auto
HDMI Colour Format	 Auto
HDMI Deep Colour	 Auto
Progressive Mode	 Auto
Audio
Network
System
Support
PANDORA DIGITAL SUBTITLE INPUT
HOME
1
4
7
VOL+
2
5
8
0
VOL–
3
6
9
SOURCE
DISC MENU
HOME REPEAT
TITLE MENU
VOL VOL
POPUP
A B C D
BONUS SUBTITLE FULL
SCREEN
SAMSUNG TV
SMART
HUB
– +
INFO
TOOLS
RETURN EXIT
AUDIO
VIEW
1
2 4
3
English 19 |
02235G-BD-ES6000,6000E-XN-ENG.indd 19 2012-03-21 오후 2:38:59
Page: 19
Settings
Settings Menu Functions
Display
3D Settings
Select whether to play a Blu-ray Disc with 3D contents
in 3D Mode.
•	If you move to the Home or Smart Hub Home
screen while in 3D mode, the player will switch to 2D
automatically.
TV Aspect Ratio
Lets you adjust the output of the player to the screen
size and screen format of your TV.
Smart Hub Screen Size
Lets you select the optimal size for the Smart Hub
Screen.
BD Wise
BD Wise is Samsung's latest inter-connectivity feature.
When you connect a Samsung player and a Samsung
TV with BD Wise to each other via HDMI, and BD Wise
is on in both the player and TV, the player outputs video
at the video resolution and frame rate of the Blu-ray
Disc/DVD.
Resolution
Set the output resolution of the HDMI video signal to
Auto, 1080p, 1080i, 720p or 576p/480p.
The number indicates the number of lines of video per
frame.
The i and p indicate interlaced and progressive scan,
respectively. Generally, the higher quality.
Movie Frame (24Fs)
If the player is connected to a 24Fs compatible TV,
setting the Movie Frame (24Fs) feature to Auto lets the
player adjust its HDMI output to 24 frames per second
automatically for improved picture quality.
•	You can enjoy the Movie Frame (24Fs) feature only on
a TV supporting this frame rate.
•	Movie Frame is only available when the player is in the
HDMI 1080i or 1080p output resolution modes.
HDMI Colour Format
Lets you set the colour space format for the HDMI
output so that it matches the capabilities of the
connected device (TV, monitor, etc). The screen goes
black momentarily after you have selected a format.
HDMI Deep Colour
Lets you set the product to output HDMI video with
Deep Colour. Deep Colour provides more accurate
colour reproduction with greater colour depth.
Progressive Mode Lets you improve picture quality when viewing DVDs.
| 20 English
02235G-BD-ES6000,6000E-XN-ENG.indd 20 2012-03-21 오후 2:39:00
Page: 20
04
Settings
Audio
Digital Output
Lets you select the digital audio output format that is
suitable for your TV or AV Receiver. For more details,
see the digital output selection table on page 53.
PCM Downsampling
Lets you choose to have 96Khz PCM signals
downsampled to 48Khz before they are outputted to an
amplifier. Choose On if your amplifier or receiver is not
compatible with a 96Khz signal.
Dynamic Range Control
Lets you apply dynamic range control to Dolby Digital,
Dolby Digital Plus, and Dolby True HD audio.

 Auto : Automatically controls the dynamic range of
Dolby TrueHD audio, based on information in the
Dolby TrueHD soundtrack. Also turns dynamic range
control on for Dolby Digital and Dolby Digital Plus.

 Off : Leaves the dynamic range uncompressed,
letting you hear the original sound.

 On : Turns dynamic range control on for all three
Dolby formats. Quieter sounds are made louder and
the volume of loud sounds is reduced.
Downmixing Mode
Lets you select the multi-channel downmix method that
is compatible with your stereo system. You can choose
to have the player downmix to normal stereo or to
surround compatible stereo.
Network
Network Settings
Configure the network connection so you can enjoy
various features such as Internet services or AllShare
Wi-Fi functionality, and perform software upgrades.
Network Status Lets you check the current network and Internet status.
Wi-Fi Direct
Lets you connect a Wi-Fi Direct device to the player
using a peer-to-pear network, without the need for a
wireless router. Note that if you set wireless network, it
may be disconnected while you're using Wi-Fi Direct.
English 21 |
02235G-BD-ES6000,6000E-XN-ENG.indd 21 2012-03-21 오후 2:39:00
Page: 21
Settings
Network
Soft AP
Lets you connect other types of Wi-Fi devices to the
player wirelessly. Requires that you create a security key
which you must enter into the other Wi-Fi devices when
you are connecting them to the network.
AllShare Settings
Lists network connected AllShare devices and lets you
control whether each device (a smartphone, a tablet,
etc.) can share content with or control the player.
Device Name
Lets you input a name for the player that will identify it
on your networks.
BD-Live Settings
Set various BD-Live function. BD-Live allows you to
access extra features available on some Blu-ray Discs if
you are connected to the Internet.

 BD-Live Internet Connection : Lets you fully allow,
partly allow, or prohibit a BD-Live Internet connection.

 BD Data Management : Manage BD data
downloaded from a BD-Live service or Blu-ray Disc.
System Initial Settings Lets you re-run the Initial Settings procedure.
Quick Start
Lets you set the player to turn on quickly by decreasing
the boot time.
|
| NOTE |
\
\ If this function set to On, Standby power consumption will be
increased.
Anynet+(HDMI-CEC)
Anynet+ is a convenient function that offers linked
operations with other Samsung players that have the
Anynet+ feature and lets you control those products
with one Samsung TV remote. To operate this function,
you must connect this player to an Anynet+ Samsung
TV using an HDMI cable.
| 22 English
02235G-BD-ES6000,6000E-XN-ENG.indd 22 2012-03-21 오후 2:39:00
Page: 22
04
Settings
System
Device Manager
You can connect a wireless USB keyboard or mouse to
the USB port on the rear of the player.

 Keyboard Settings : Lets you configure a wireless
USB keyboard connected to the player.
|
| NOTE |
\
\ You can use the keyboard only when a QWERTY keyboard
screen or window appears in the Web Browser.

 Mouse Settings : Lets you configure a wireless USB
mouse connected to the player. You can use the
mouse in the player's menu in the same way you use
a mouse on your PC.
`
` To use a mouse with the player's menu:
1.	 Connect the USB mouse to the player.
2.	 Click the primary button you selected in Mouse
Settings. The Simple Menu appears.
3.	 Click the menu options you want.
|
| NOTE |
\
\ Depending on the model of the USB HID keyboard and mouse
may not be compatible with your product.
\
\ Some HID keyboard keys may not work.
\
\ Wired USB keyboards are not supported.
\
\ Some applications may not be supported.
\
\ If a wireless HID Keyboard does not operate because of
interference, move the keyboard closer to the player.
Language
You can select the language you prefer for the On-
screen menu, disc menu, subtitles, etc.
•	The language you select for the disc menu, disc
audio, or subtitles will only appear if it is supported on
the disc.
English 23 |
02235G-BD-ES6000,6000E-XN-ENG.indd 23 2012-03-21 오후 2:39:00
Page: 23
Settings
System
Security
The default PIN is 0000. Enter the default PIN to access
the security function if you haven't created your own
PIN. After you have accessed the security function for
the first time, change the PIN using the Change PIN
function.

 BD Parental Rating : Prevents playback of Blu-ray
Discs with a rating equal to or above a specific age
rating you enter unless the PIN is entered.

 DVD Parental Rating : Prevents playback of DVDs
with a rating above a specific numerical rating you
select unless the PIN is entered.

 Change PIN : Change the 4-digit PIN used to access
security functions.
`
` If you forget your PIN:
1.	 Remove any disc or USB storage device.
2.	 Press and hold the @ button on the front panel for
5 seconds or more.
All settings will revert to the factory settings.
General
You can change the options listed below to match your
preferences.

 Time Zone : Select the time zone in which you live.

 Menu Transparency : Adjust the transparency of the
menu box.
DivX® Video On
Demand
View DivX® VOD Registration Codes to purchase and
play DivX® VOD contents.
Support Software Upgrade
For more information about the Software Upgrade
function, see "Upgrading Software" on pages 29~31.
Contact Samsung
Provides contact information for assistance with your
player.
Remote Management
When activated, lets Samsung Call Centre agents
diagnose and fix problems with the product remotely.
Requires an active Internet connection.
|
| NOTE |
\
\ Remote Management service might not be available in some
countries.
\
\ Contact your nearest service centre for your PIN code and tell
the code to the person in charge. It enables remote diagnosis
of the product and required measures.
Reset
Resets all settings to their default settings except for the
network and Smart Hub settings.
The default security PIN is 0000.
| 24 English
02235G-BD-ES6000,6000E-XN-ENG.indd 24 2012-03-21 오후 2:39:00
Page: 24
04
Settings
Networks and the Internet
When you connect this player to a network,
you can use network based applications and
functions such as Smart Hub and BD-LIVE,
and upgrade the player's software through the
network connection. For more information about
accessing and using Internet services, see the
Network Services chapter of this manual on pages
43~45. Instructions for configuring the network
connection start below.
Configuring Your Network Connection
Before you begin, contact your ISP to find out
if your IP address is static or dynamic. If it is
dynamic, and you have a wired or wireless
network, we recommend using the Automatic
configuration procedures described below.
If you are connecting to a wired network, connect
the player to your router using a LAN cable before
you start the configuration procedure.
If you are connecting to a wireless network,
disconnect any wired network connection before
you begin.
To begin configuring your network connection,
follow these steps:
1.	 In the Home screen, select Settings, and
then press the v button.
2.	 Select Network, and then press the v
button.
3.	 Select Network Settings, and then press the
v button.
4.	 Go to the instructions for Wired networks
starting below or the instructions for Wireless
networks starting on page 26.
Wired Network
Ğ
Ğ Wired - Automatic
After following Steps 1 to 3 above:
1.	 Select Start in the Network Settings screen,
and then press the v button. The player
detects the wired connection, verifies the
network connection and then connects to the
network.
Ğ
Ğ Wired - Manual
If you have a static IP address or the Automatic
procedure does not work, you'll need to set the
Network Settings values manually.
After following Steps 1 to 3 above:
1.	 Select Start in the Network Settings screen,
and then press the v button.
The Network Status screen appears.
The player attempts to verify the network
connection and fails.
2.	 Select IP Settings on the right of the screen,
and press the v button.
The IP Settings screen appears.
3.	 Select the IP Mode field, and then set it to
Manual.
4.	 Use the number keypad on your remote to
enter the Network values. Use the ▲▼◄►
buttons on the remote to move from entry
field to entry field.
|
| NOTE |
\
\ You can get these values from your Internet provider. You
can also view these values on most Windows computers.
For instructions, see "Getting the Network Settings
Values." on page 26.
5.	 When done, highlight OK, and then press
v button. The player verifies the network
connection and then connects to the
network.
IP Settings
OK
Retry
Previous
Network Settings
Wired network connection failed.
Unable to connect to the network. Try the following: check if
your IP address is set correctly in IP Settings. Contact your
Internet service provider for more information.
MAC Address	 XX:XX:XX:XX:XX:XX
IP Address	 0.0.0.0
Subnet Mask	 0.0.0.0
Gateway	0.0.0.0
DNS Server	 0.0.0.0
English 25 |
02235G-BD-ES6000,6000E-XN-ENG.indd 25 2012-03-21 오후 2:39:00
Page: 25
Settings
< Getting the Network Settings Values >
You can view your Network Settings values on
most Windows computers. To view the Network
Settings values, follow these steps:
•	Windows XP
1.	 Right click the Network icon on the bottom
right of the Windows desktop.
2.	 In the pop-up menu, click Status.
3.	 On the dialog that appears, click the Support
tab.
4.	 On the Support tab, click the Details button.
The Network settings are displayed.
•	Windows 7
1.	 Click the Network icon on the bottom right of
the Windows desktop.
2.	 In the pop-up menu, click Network and
Sharing Centre.
3.	 On the dialog that appears, click the Local
Area Connection or Wireless Network
Connection depending on your network
connection.
4.	 On the Support tab, click the Details button.
The Network settings are displayed.
|
| NOTE |
\
\ Depending on your Windows version, the information may
differ.
Wireless Network
You can setup a wireless network connection in
three ways:
-
- Wireless Automatic
-
- Wireless Manual
-
- WPS(PBC)
When you configure the wireless network
connection, any wireless network devices currently
connected through the player or, if applicable,
the player's current wired connection, will be
disconnected.
Ğ
Ğ Wireless (General) - Automatic
After followng Steps 1 to 3 in "Configuring Your
Network Connection" on page 25.
1.	 Select Start in the Network Settings screen,
and then press the v button.
The player searches for and then displays a
list of the available networks.
2.	 Select the desired network, and then press
the v button.
3.	 Select Next, and then press the v button
again.
4.	 On the Security screen, enter your network's
Security Code or Pass Phrase.
Enter numbers directly using the number
buttons on your remote control. Enter letters
by selecting a letter with an arrow button, and
then pressing v button.
5.	 When done, select Next at the right of the
screen. The player verifies the network
connection and then connects to the
network.
|
| NOTE |
\
\ You should be able to find the Security Code or Pass
Phrase on one of the set up screens you used to set up
your router or modem.
Ğ
Ğ Wireless (General) - Manual
If you have a static IP address or the Automatic
procedure does not work, you'll need to set the
Network Settings values manually.
After folloiwng Steps 1 to 3 in "Configuring Your
Network Connection" on page 25.
WPS(PBC)
Next
Cancel
Previous
Refresh
Network Settings
Select your wireless router from the list.
iptime23
ELT
JSY
KT_WLAN_C361
Mirhenge_edu
SO070VOIP
| 26 English
02235G-BD-ES6000,6000E-XN-ENG.indd 26 2012-03-21 오후 2:39:00
Page: 26
04
Settings
1.	 Select Start in the Network Settings screen,
and then press the v button. The player
searches for and then displays a list of the
available networks.
2.	 Select the desired network, and then press
the v button.
3.	 Select Next, and then press the v button
again.
4.	 On the Security screen, enter your network's
Security Code or Pass Phrase. Enter
numbers directly using the number buttons
on your remote control. Enter letters by
selecting a letter with the ▲▼◄► buttons,
and then pressing the v button.
5.	 When done, select Next at the right of the
screen, and then press the v button.
6.	 The Network Status screen appears.
The player attempts to verify the network
connection and fails.
7.	 Select IP Settings on the right of the screen,
and press the v button. The IP Settings
screen appears.
8.	 Select the IP Mode field, and then set it to
Manual.
9.	 Use the number keypad on your remote to
enter the Network values. Use the ▲▼◄►
buttons on the remote to move from entry
field to entry field.
|
| NOTE |
\
\ You can get these values from your Internet provider. You
can also view these values on most Windows computers.
For instructions, see "Getting the Network Settings
Values." on page 26.
10.	 When done, highlight OK, and then press v
button. The Network Status screen appears.
The product verifies the network connection
and then connects to the network. When it
is done, highlight OK, and then press v
button.
Ğ
Ğ WPS(PBC)
After followng Steps 1 to 3 in "Configuring Your
Network Connection" on page 25.
1.	 Select Start in the Network Settings screen,
and then press the v button.
The player searches for and then displays a
list of the available networks.
2.	 Press the WPS(PBC) button on your router
within two minutes. Your player automatically
acquires all the network settings values it
needs and connects to your network.
The Network Status screen appears. The
player connects to the network after the
network connection is verified.
Wi-Fi Direct
The Wi-Fi Direct function allows you to connect
Wi-Fi Direct devices to the player and each other
using a peer-to-peer network, without a wireless
router.
|
| NOTE |
\
\ Some Wi-Fi Direct devices may not support the AllShare
function if connected via Wi-Fi Direct. If this is the case,
it is advisable to change the network connection method
between devices.
1.	 Turn on the Wi-Fi direct device and activate
its Wi-Fi Direct function.
2.	 In the Home screen, select Settings, and
then press the v button.
3.	 Select Network, and then press the v
button.
4.	 Select Wi-Fi Direct, and then press the v
button.
The Wi-Fi Direct devices that you can
connect appear.
Display
Audio
Network
System
Support
Refresh
Close
Wi-Fi Direct
Device Name : [BD]ES6000
Select your Wi-Fi Direct device to connect to.
AndroidXXXXXXX	Disconnected
' Return
English 27 |
02235G-BD-ES6000,6000E-XN-ENG.indd 27 2012-03-21 오후 2:39:01
Page: 27
Settings
5.	 You have three ways to complete the Wi-Fi
connection:
•	Through the Wi-Fi device.
•	Through the player using PBC.
•	Through the player using a PIN.
Each is covered below.
Through the Wi-Fi Device
1.	 On the Wi-Fi device, follow the procedure on
the device for connecting to another Wi-Fi
Direct device. See the device's user manual
for instructions.
2.	 When you have completed the procedure,
you should see a pop-up on your TV screen
saying that a device that supports Wi-Fi
Direct has requested to connect. Select OK,
and then press the v button to accept.
3.	 The Connecting pop-up appears, followed
by the Connected pop-up. When it closes,
you should see the device listed on the Wi-Fi
Direct screen as connected.
Through the Player Using PBC
1.	 Select the Wi-Fi Direct device you want to
connect to this player, and then press the v
button. The PBC/PIN pop up appears.
2.	 Select PBC, and then press the v button.
The PBC pop-up appears.
3.	 Press the PBC button on the Wi-Fi Direct
device within 2 minutes.
4.	 The Connecting pop-up appears, followed
by the Connected pop-up. When it closes,
you should see the device listed on the Wi-Fi
Direct screen as connected.
Through the Player Using a PIN
1.	 Select the Wi-Fi Direct device you want to
connect to this player, and then press the v
button. The PBC/PIN pop up appears.
2.	 Select PIN, and then press the v button.
The PIN pop-up appears.
3.	 Note the PIN code in the pop-up, and then
enter it into the appropriate field in the Wi-Fi
Direct device you want to connect.
4.	 The Connecting pop-up appears, followed
by the Connected pop-up. When it closes,
you should see the device listed on the Wi-Fi
Direct screen as connected.
|
| NOTE |
\
\ The wired or wireless network connection will be
disconnected when you use the Wi-Fi Direct function.
Soft AP
Soft AP is short for Software enabled Access
Point.
Soft AP lets you connect other Wi-Fi devices to
your network through the player and lets you can
enjoy various features such as AllShare network
functionality or network remote control.
It requires that you create a security key which you
must enter into the other Wi-Fi devices when you
are connecting them to the network.
1.	 In the Home screen, select Settings, and
then press the v button.
2.	 Select Network, and then press the v
button.
3.	 Select Soft AP, and then press the v
button.
4.	 Select On or Off, and then press the v
button.
< To Set the Soft AP Security Key >
1.	 On the Soft AP screen, select Security Key,
and then press the v button. The Security
Key screen appears.
2.	 On the Security key screen, enter a security
key. Enter numbers directly using the number
buttons on your remote control. Enter
letters by selecting a letter with the ▲▼◄►
buttons, and then pressing the v button.
3.	 When done, use the the ▲▼◄► buttons to
move to DONE at the bottom of the screen,
and then press the v button.
When you connect a Wi-Fi device through the
connection procedure on the device, you must
enter the security key you created here into the
appropriate field.
| 28 English
02235G-BD-ES6000,6000E-XN-ENG.indd 28 2012-03-21 오후 2:39:01
Page: 28
04
Settings
AllShare Settings
The AllShare Settings screen lists your network
connected AllShare devices and their IP
addresses. Through this screen, you can allow
a device to access the player, deny access, or
delete the device from the AllShare list.
1.	 In the Home screen, select Settings, and
then press the v button.
2.	 Select Network, and then press the v
button.
3.	 Select AllShare Settngs, and then press the
v button.
4.	 Select a device, and then press the v
button. The AllShare Settings pop-up
appears.
5.	 Select Allow, Deny, or Delete from List, and
then press the v button.
The AllShare Settings screen only displays devices
if you have established networked connections
to AllShare devices. For more information about
AllShare networked devices, see page 32.
Upgrading Software
The Software Upgrade menu allows you to
upgrade the player's software for performance
improvements or additional services.
•	Never turn the player off or back on manually during
the update process.
1.	 In the Home screen, select the Settings, and
then press the v button.
2.	 Select Support, and then press the v
button.
3.	 Select Software Upgrade, and then press
the v button.
4.	 Select one of the following methods:
•	By Online
•	By USB
•	By Disc
•	By Downloaded
•	Standby Mode Upgrade
5.	 Press the v button.
|
| NOTE |
\
\ The upgrade is complete when the player turns off, and
then turns on again by itself.
\
\ Samsung Electronics shall takes no legal responsibility
for player malfunction caused by an unstable Internet
connection or consumer negligence during a software
upgrade.
\
\ If you want to cancel the upgrade while the upgrade
software is downloading, press the v button.
By Online
Your player must be connected to the Internet to
use the By Online function.
1.	 Select By Online, and then press the v
button. The Connecting to Server message
appears.
2.	 If there is a download available, the Download
pop-up appears with a progress bar and the
download starts.
3.	 When the download is complete, the
Upgrade Query window appears with three
choices: Upgrade Now, Upgrade Later, or
Don't Upgrade.
4.	 If you select Upgrade Now, the player
upgrades the software, turns off, and then
turns on automatically.
5.	 If you do not make a selection in one minute
or select Upgrade Later, the player stores
the new upgrade software. You can upgrade
the software later using the By Downloaded
function.
6.	 If you select Don't Upgrade, the player
cancels the upgrade.
English 29 |
02235G-BD-ES6000,6000E-XN-ENG.indd 29 2012-03-21 오후 2:39:01
Page: 29
Settings
By USB
1.	 Visit www.samsung.com.
2.	 Click SUPPORT on the top right of the page.
3.	 Enter the product's model number into the
search field, and then click Find Product.
4.	 Click Get downloads in the centre of the
page below the Downloads header.
5.	 Click Firmware in the centre of the page.
6.	 Click the ZIP icon in the File column on the
right side of the page.
7.	 Click OK in the pop-up that appears to
download and save the firmware file to your
PC.
8.	 Unzip the zip archive to your computer. You
should have a single folder with the same
name as the zip file.
9.	 Copy the folder to a USB flash drive.
10.	 Make sure no disc is inserted in the player,
and then insert the USB flash drive into the
USB port of the player.
11.	 In the player's menu, go to Settings >
Support > Software Upgrade.
12.	 Select By USB.
|
| NOTE |
\
\ There should be no disc in the player when you upgrade
the software using the USB Host jack.
\
\ When the software upgrade is done, check the software
details in the software Upgrade menu.
\
\ Do not turn off the player during the software upgrade.
It may cause the player to malfunction.
\
\ Software upgrades using the USB Host jack must be
performed with a USB flash memory stick only.
By Disc
1.	 Follow Steps 1 through 7 in By USB.
2.	 Unzip the zip archive to your computer. You
should have a single folder with the same
name as the zip file.
3.	 Write the folder onto a disc. We recommend
a CD-R or DVD-R.
4.	 Finalize the disc before you remove it from
your computer.
5.	 Insert the disc into the player.
6.	 In the player's menu, go to Settings >
Support > Software upgrade.
7.	 Select By Disc.
|
| NOTE |
\
\ When the system upgrade is done, check the software
details in the software Upgrade menu.
\
\ Do not turn off the player during the Software Upgrade.
It may cause the player malfunction.
By Downloaded
The By Downloaded option lets you upgrade
using a file the player downloaded earlier but
you decided not to install immediately or a file
downloaded by the player in Standby Mode.
1.	 If upgrade software has been downloaded,
you will see the software version number to
the right of By Downloaded.
2.	 Select By Downloaded, and then press the
v button.
3.	 The player displays a message asking if you
want to upgrade. Select Yes. The player
begins the upgrade.
4.	 When the update is complete, the player
turns off automatically, and then turns on.
|
| NOTE |
\
\ When the system upgrade is done, check the software
details in the software Upgrade menu.
\
\ Do not turn off the player during the software Upgrade.
It may cause the player to malfunction.
| 30 English
02235G-BD-ES6000,6000E-XN-ENG.indd 30 2012-03-21 오후 2:39:01
Page: 30
04
Settings
Standby Mode Upgrade
You can set the Standby Mode Upgrade function
so that the player downloads new upgrade
software when it is in Standby mode.
In Standby mode, the player is off, but its Internet
connection is active. This allows the player to
download upgrade software automatically, when
you are not using it.
1.	 Press the ▲▼ buttons to select Standby
Mode Upgrade, and then press the v
button.
2.	 Select On or Off.
If you select On, the player will automatically
download new upgrade software when it
is in Standby mode with the power off. If it
downloads new upgrade software, the player
will ask you if you want to install it when you
turn the player on.
|
| NOTE |
\
\ To use Standby Mode Upgrade function, your player must
be connected to the Internet.
English 31 |
02235G-BD-ES6000,6000E-XN-ENG.indd 31 2012-03-21 오후 2:39:01
Page: 31
Media Play
Your Blu-ray Disc Player can play content located
on Blu-ray/DVD/CD discs, USB devices, PCs, and
DLNA compatible cell phones. To play content
located on your PC or on a DLNA compatible cell
phone, you must connect your PC and the player
to your network and download and install the
AllShare network software on your PC.
Playing Commercial Video Discs
1.	 Push a disc gently into the slot with the disc's
label facing up. Playback starts automatically.
2.	 If playback does not start automatically, press
the 6 button on the remote or see "The
AllShare Play Screen" below.
The AllShare Play Screen
For all media, except for commercail video discs,
the AllShare Play Main Screen or one of its
subscreens is your primary means of accessing
and selecting content to view or play. For example,
if you connect a USB device to the player, the
player will display the content located on the USB
device on the AllShare Play USB screen.
|
| NOTE |
\
\ You can use the AllShare Play Screen to access a
commercial video disc. For example, when you stop a
movie, but leave the disc in the player, you can start it
again using the AllShare Play Screen. However, unlike
other media, when you insert a commercial video disc,
it bypasses the AllShare Play Screen and starts playing
automatically.
Accessing the AllShare Play Screen
To access the AllShare Play Main screen, select
AllShare Play on the Home screen, and then press
the v button.
The AllShare Play Screen at a Glance
1
My list : Lists recently played or viewed files. If the
device or media containing files listed in My List is
inserted into or connected to the player, you can
use My List to play or view those files.
2
Contents Type : Lets you select the type of content
to view or play: Videos, Photos, or Music.
3
Device Type : Lets you select the device or media
where the content is located.
4
Displays the coloured buttons on your remote that
you can press to access or perform functions.
|
| NOTE |
\
\ The video files played via DLNA will be listed in My List
only when the network connection has been established.
\
\ Blu-ray/DVD/CD disk contents will not be listed in My List.
\
\ The AllShare Play screen will only display files of the
Content Type you selected. For example, if you select
Music, you will only be able to see music files. If you open
folders labelled Photos or Videos, no files will be displayed.
To view other types of files, select a different Content Type.
Playing Files on a USB Device or
USB Compatible Mobile Phone
There are two methods you can use to play or
view multimedia files located on a USB device
or USB compatible mobile phone through your
player.
AllShare Play / Videos /
3
4
1
2
Disc
USB
DLNA
a Login ' Return
My list
Videos
Photos
Music
No Disc inserted.
There is no device connected.
There is no device connected.
| 32 English
02235G-BD-ES6000,6000E-XN-ENG.indd 32 2012-03-21 오후 2:39:02
Page: 32
05
Media
Play
Method 1
1.	 Turn the player on.
2.	 Connect the USB device or mobile phone to
the USB port on the rear panel of the player.
The New Device Connected pop-up appears.
|
| NOTE |
\
\ If the pop-up does not appear, go to Method 2.
3.	 Use the ▲▼ buttons to select Videos,
Photos, or Music, and then press the v
button. The AllShare Play screen appears
listing the content of the device or phone.
Depending on how the contents is arranged,
you will see either folders, individual files, or
both.
4.	 Select a file to view or play, and then press
the v button.
5.	 Press the RETURN button to exit a folder or
to return to the Home screen.
Method 2
1.	 Turn the player on.
2.	 Connect the USB device or mobile phone to
the USB port on the rear panel of the player.
3.	 Select AllShare Play on the Home screen,
and then press the v button.
4.	 On the left side, select Videos, Photos, or
Music, and then press the v button.
5.	 On the right side, select USB Flash Memory,
and then press the v button. The AllShare
Play screen appears listing the contents of
the device or phone. Depending on how the
contents are arranged, you will see either
folders, individual files, or both.
6.	 If necessary, use the the ▲▼◄► buttons
to select a folder, and then press the v
button.
7.	 Use the ▲▼◄► buttons to select a file to
view or play, and then press the v button.
8.	 Press the RETURN button to exit a folder or
to return to Home screen.
|
| NOTE |
\
\ To remove the USB storage device, you must use the
"Safely Remove USB" function to prevent possible
damage to the USB memory. Press the HOME button to
move to the Home screen, press the YELLOW (C) button,
and then press the v button.
\
\ If you insert a disc when playing a USB device or phone,
the device mode changes to "Disc" automatically.
\
\ If your mobile phone is DLNA compatible, you can play
contents without connecting a USB cable. See "Using the
AllShare Network Function" on pages 34~35.
Playing Commercial Audio Discs
1.	 Place a pre-recorded, commercial audio disc
into the disc tray with the disc's label facing
up, and then close the tray. The AllShare
Music screen appears listing the tracks.
Playback of the first track starts automatically.
2.	 To play a particular track, use the ▲▼ buttons
on the remote to select the track, and then
press the v button.
Music Screen Controls
bc Page Move / Tools ' Return
AllShare Play / Music / Audio CD
TRACK 001	 02:38
TRACK 002	 03:17
TRACK 003	 05:21
TRACK 004	 05:34
TRACK 005	 02:54
TRACK 006	 03:44
TRACK 007	 04:07
TRACK 008	 03:42
TRACK 009	 03:15
TRACK 010	 03:16
1/14
00:03 / 02:38
 TRACK 001
Smart Hub
Play videos, photos, or music content from Disc, USB, PC or mobile
devices.
c Safely Remove USB
Settings
AllShare Play
" Enter ' Return
New device connected.
m80
Videos
Photos
Music
English 33 |
02235G-BD-ES6000,6000E-XN-ENG.indd 33 2012-03-21 오후 2:39:03
Page: 33
Media Play
Pause a track.
Play a track.
Repeat one track or all tracks.
Play tracks in random order.
To access the controls, play a track, and then use
the ◄► buttons to move to the control of your
choice.
|
| NOTE |
\
\ The Music Screen controls are only accessible when a
track is playing.
\
\ All controls do not appear at the same time.
\
\ For more information about playing music, go to
Controlling Music Playback on pages 38~39.
Playing a Disc with User Recorded
Content
You can play mulitmedia files you have recorded
on DVD or CD discs.
1.	 Place a user recorded disc into the disc tray
with the disc's label facing up, and then
close the tray. The Device Connected pop-up
appears.
2.	 Use the ▲▼ buttons to select the type of
content you want to view or play - Videos,
Photos, or Music - and then press the v
button.
|
| NOTE |
\
\ Even though the player will display folders for all content
types, it will only display files of the Content Type you
selected in Step 2. For example, if you selected music,
you will only be able to see music files. You can change
this selection on the AllShare Play main screen.
3.	 Use the ◄► buttons to select the folder
containing the content type you chose in
Step 2, and then press the v button.
4.	 If you selected Music, the Allshare Music
screen appears listing the music files on the
disc. Use the ▲▼ buttons to select the file
you want to play, and then press the v
button.
5.	 If you selected Photos, the AllShare Photos
screen appears listing the photos on the disc.
Use the ▲▼◄► buttons to select the photo
you want to view, and and then press the v
button.
6.	 If you selected Videos, the AllShare Videos
screen appears listing the video files on the
disc. Use the ▲▼◄► buttons to select the
video you want to watch, and and then press
the v button.
|
| NOTE |
\
\ For all folders, - Music, Photo, and Video - you can
also push the TOOLS button on your remote, and then
select Play Folder to play or view all the files in the folder
automatically. Select the folder first before pushing the
TOOLS button.
Using the AllShare Network
Function
AllShare lets you play Videos, Photos, or Music
located on your PC or your DLNA compatible
device through the player using a wireless network
connection.
To Download the AllShare Software
To use AllShare with your PC or DLNA device, you
must install AllShare software on your PC.
You can download the PC software and get
detailed instructions for using AllShare from the
Samsung.com website.
1.	 Go to www.samsung.com.
2.	 Click Support at the top of the page.
3.	 On the Support page, enter the model
number of your player into the Model Number
field, and then press the v button.
4.	 On the page that appears, click Get
downloads on the left side under Downloads.
The Download Centre appears.
5.	 On the Download Centre page, click the
Software tab.
6.	 On the software tab, click the File icon on the
right side of the AllShare line.
| 34 English
02235G-BD-ES6000,6000E-XN-ENG.indd 34 2012-03-21 오후 2:39:04
Page: 34
05
Media
Play
7.	 In the pop-up that appears, click Save File.
8.	 Find the AllShare install file on your disk, and
then double click the file.
9.	 In the pop-up that appears, click Run, and
then follow the directions that appear on your
screen.
Download the AllShare Installation/Instruction
manual from the same Software Tab by clicking
the corresponding PDF file symbol in the File
column on the right. The file, in PDF format, will
download and open. You can view and/or save
the file.
Playing Content Located on Your PC or
DLNA Device through the Blu-ray Disc
Player
1.	 Connect the Blu-ray Disc Player, your PC,
and/or your DLNA compatible cell phone to
the same wireless network.
2.	 Follow the directions in the AllShare software
Installation/Instruction manual to set up
devices and files for playing or viewing.
3.	 Select AllShare Play in the player's Home
screen, and then press the v button. The
AllShare Play screen appears.
4.	 Select the connected DLNA compatible
device or your PC, and then press the v
button. A screen listing the available files
appears.
5.	 Select the file you want to play or view, and
then press the v button.
Controlling the Playback of Content
Located on Your PC with Your Smart
Phone
(Only available with Samsung phones supporting
AllShare functionality.)
1.	 Connect the Blu-ray Disc Player, your PC,
and your DLNA compatible cell phone to the
same wireless network.
2.	 Follow the directions in the AllShare software
Installation/Instruction manual to set up
devices and files for playing or viewing.
3.	 On your computer, using the AllShare
software, confirm your phone is connected.
4.	 On the phone, select the file you want to view
or play, and then select the Blu-ray player as
the playback device.
5.	 On the phone, start playback.
AllShare Connection
PC Blu-ray Disc Player
Play back
PC's files
AllShare
Connection
Control PC's files to
Blu-ray Disc Player
PC
Smart Phone
Blu-ray Disc Player
Play back
PC's files
English 35 |
02235G-BD-ES6000,6000E-XN-ENG.indd 35 2012-03-21 오후 2:39:05
Page: 35
Media Play
Controlling Video Playback
You can control the playback of video content located on a DVD, USB, mobile device or PC. Depending
on the disc or contents, some of the functions described in this manual may not be available.
Buttons on the Remote Control used for Video Playback
„
„ Using the disc menu, title menu, popup
menu, and title list
DISC MENU
button
During playback, press this button to
display the Disc menu.
TITLE MENU
button
During playback, press this button to
display the Title menu.
•	If your disc has a playlist, press the
GREEN (B) button to go to the playlist.
POPUP MENU
button
During playback, press this button to
display the Popup menu.
Using the Tools Menu
During playback, press the TOOLS button.
Play from the
Beginning
Select to return to the beginning of the
movie, and then press the v button.
Title Search
If there is more than one movie on the
disc or device, select to start a different
title.
1.	 Select Title Search, and then press
the v button.
2.	 Use the ▲▼ buttons to select
a title, and then press the v
button.
Chapter Search
Select to play the chapter of your
choice.
1.	 Select Chapter Search, and then
press the v button.
2.	 Use the ▲▼ buttons to select a
chapter, and then press the v
button.
„
„ Playback related buttons
The player does not play sound in Search, Slow or
Step mode.
•	To return to normal speed playback, press the
6 button.
6 button Starts playback.
5 button Stops playback.
7 button Pauses playback.
Fast Motion
Play
During playback, press the 3 or 4
button.
Each time you press the 3 or 4
button, the playback speed will change.
Slow Motion
Play
In pause mode, press the 4 button.
Each time you press the 4 button, the
playback speed will change.
Step Motion
Play
In pause mode, press the 7 button.
Each time you press the 7 button, a
new frame appears.
Skip Motion
Play
During playback, press the 1 or 2
button.
Each time you press 1 or 2 button,
the disc moves to the previous or next
chapter or file.
PANDORA DIGITAL SUBTITLE INPUT
HOME
1
4
7
VOL+
2
5
8
0
VOL–
3
6
9
SOURCE
DISC MENU
HOME REPEAT
TITLE MENU
VOL VOL
POPUP
A B C D
BONUS SUBTITLE FULL
SCREEN
SAMSUNG TV
SMART
HUB
– +
INFO
TOOLS
RETURN EXIT
AUDIO
VIEW
| 36 English
02235G-BD-ES6000,6000E-XN-ENG.indd 36 2012-03-21 오후 2:39:05
Page: 36
05
Media
Play
Time Search
Select to play the movie from a
selected time point.
1.	 Select Time Search, and then
press the v button.
2.	 Using the number buttons, enter
the time point you want to go to,
and then press the v button.
|
| NOTE |
\
\ You can also use the ◄► buttons
to advance or rewind the movie.
The movie advances or rewinds one
minute each tme you press the ◄
► buttons.
Repeat Mode
Select to repeat a title, chapter, or
specific section.
-
- Off : Select to return to normal
playback.
-
- Title : Choose to repeat a selected
title.
-
- Chapter : Choose to repeat a
specific chapter.
-
- Repeat A-B : Choose to repeat a
specific section.
1.	 Press the ▲▼ buttons to select
repeat A-B, and then press the
v button.
2.	 Press the v button at the point
where you want repeat play to start
(A). Let the movie play.
3.	 Press the v button at the point
where you want repeat play to stop
(B).
|
| NOTE |
\
\ You must set point (B) at least 5
seconds of playing time after point
(A).
Full Screen Select to change the full screen size.
Picture Mode
Select to set the picture mode.
-
- Dynamic : Increases sharpness and
brightness.
-
- Standard : Choose this setting for
most viewing applications.
-
- Movie : The best setting for
watching movies.
-
- User : Lets you adjust the sharpness
and noise reduction function
respectively.
|
| NOTE |
\
\ When you use the BD wise function,
this menu will not appear.
Audio
Select to set the desired audio
language.
Subtitle
Select to set the desired subtitle
language.
-
- You can also operate this function
by pressing the SUBTITLE button on
the remote control.
Angle
Select to view a scene from another
angle. The Angle option displays the
number of angles available to view.
When a Blu-ray Disc/DVD contains
multiple angles of a particular scene,
you can change angle.
BONUSVIEW
Video Select to set the desired bonusview
option.
BONUSVIEW
Audio
Go to Videos
List
Select to go to the list of videos on the
current media.
Information Select to view video file information.
|
| NOTE |
\
\ Depending on the disc or storage device, the Tools menu
may differ. See pages 40~42 for addtional options.
\
\ Video files with high bit rates of 20Mbps or more strain
the player's capabilities and may stop playing during
playback.
English 37 |
02235G-BD-ES6000,6000E-XN-ENG.indd 37 2012-03-21 오후 2:39:05
Page: 37
Media Play
Controlling Music Playback
You can control the playback of music content
located on a DVD, USB, mobile device or PC.
Buttons on the Remote Control used
for Music Playback
1
NUMBER buttons : Press the number of a track.
The selected track is played.
2 5 button : Stops a track.
3
Skip : During playback, press the GREEN (B) or
YELLOW (C) button to move to the previous or next
page of the playlist.
4
Fast Play (Audio CD (CD-DA) only)
During playback, press the 3 or 4 button.
Each time you press the 3 or 4 button, the
playback speed will change.
5 7 button : Pauses a track.
6 6 button : Plays the currently selected track.
Using the Tools Menu
During playback, press the TOOLS button.
View See pages 40~42.
Folder view See pages 40~42.
Title See pages 40~42.
Artist See pages 40~42.
Album See pages 40~42.
Genre See pages 40~42.
Selection Play See pages 40~42.
Go to Playlist See pages 40~42.
Rip
The Ripping function converts CD
audio to the mp3 format and saves
the converted files on a USB device
connected to the player. See Ripping
on page 39.
Information
Select to see the (Contents)
information: File size, date created, etc.
|
| NOTE |
\
\ Depending on the disc or storage device, the Tools menu
may differ. See pages 40~42 for addtional options.
Repeating Tracks on an Audio CD
You can set the product to repeat tracks on an
audio CD (CD-DA/MP3).
1.	 During playback, use the ► button to select
in the lower right corner of the screen,
and then press the v button.
2.	 Use the ▲▼ to select the repeat mode you
want - Off, One Song, or All - and then press
the v button.
Shuffling Tracks on an Audio CD
You can set the product to play tracks on an audio
CD (CD-DA/MP3) at random.
1.	 During playback, use the ► button to select
in the lower right corner of the screen,
and then press the v button.
2.	 Use the ▲▼ to set the Shuffle mode On or
Off, and then press the v button.
bc Page Move / Tools ' Return
AllShare Play / Music / Audio CD
TRACK 001	 02:38
TRACK 002	 03:17
TRACK 003	 05:21
TRACK 004	 05:34
TRACK 005	 02:54
TRACK 006	 03:44
TRACK 007	 04:07
TRACK 008	 03:42
TRACK 009	 03:15
TRACK 010	 03:16
1/14
00:03 / 02:38
 TRACK 001
PANDORA DIGITAL SUBTITLE INPUT
HOME
1
4
7
VOL+
2
5
8
0
VOL–
3
6
9
SOURCE
DISC MENU
HOME REPEAT
TITLE MENU
VOL VOL
POPUP
A B C D
BONUS SUBTITLE FULL
SCREEN
SAMSUNG TV
SMART
HUB
– +
INFO
TOOLS
RETURN EXIT
AUDIO
VIEW
PANDORA DIGITAL SUBTITLE INPUT
HOME
1
4
7
VOL+
2
5
8
0
VOL–
3
6
9
SOURCE
DISC MENU
HOME REPEAT
TITLE MENU
VOL VOL
POPUP
A B C D
BONUS SUBTITLE FULL
SCREEN
SAMSUNG TV
SMART
HUB
– +
INFO
TOOLS
RETURN EXIT
AUDIO
VIEW
1
4
5
6
2
3
| 38 English
02235G-BD-ES6000,6000E-XN-ENG.indd 38 2012-03-21 오후 2:39:05
Page: 38
05
Media
Play
Creating a Playlist from a CD
1.	 With the Playback screen displayed, press
the TOOLS button. The Tools menu appears.
2.	 Use the ▲▼ buttons to select Selection
Play, and then press the v button. The
Selection Play screen appears.
3.	 Use the ▲▼ buttons to select a track, and
then press the v button. A check appears
to the left of the track.
4.	 Repeat Step 3 to select and check additional
tracks.
5.	 To remove a track from the list, move to the
track, and then press the v button again.
The check on the track is removed.
6.	 When done, press the ► button to select
Play, and then press the v button. The
Music Playback screen reappears listing only
the tracks you checked. The selected tracks
play automatically.
|
| NOTE |
\
\ You can create a playlist with up to 99 tracks on Audio
CDs (CD-DA).
\
\ If you have created a playlist, Selection Play is replaced
by Edit Playlist on the Tools menu.
\
\ On the Selection Play screen, you can also choose Select
All, Deselect All, and Cancel.
-
- Use Select All to select all tracks. This cancels your
individual track selections. When you press the
RETURN button on your remote or select 6 button,
and then press the v button, all tracks will appear
on the Music Playback screen, and the product will
begin to play all tracks from Track 001.
-
- Use Deselect All to deselect all selected tracks at once.
Then, select individual tracks or use Select All to select
all the tracks, and then press the RETURN button
on your remote or select 6 button, and then press
the v button. If you do not use Select All or select
individual tracks, the Playlist will not change.
-
- Cancel cancels any changes you made on the Play
Select screen. When you return to the Playback screen,
the Playlist will be unchanged.
Ripping
1.	 Insert a USB device into the USB jack on the
rear of the product.
2.	 With the Playback screen displayed, press
the TOOLS button. The Tools menu appears.
3.	 Use the ▲▼ buttons to select Rip, and
then press the v button. The Rip screen
appears.
4.	 Use the ▲▼ buttons to select a track, and
then press the v button. A check appears
to the left of the track.
5.	 Repeat Step 3 to select and check additional
tracks.
6.	 To remove a track from the list, move to the
track, and then press the v button again.
The check on the track is removed.
7.	 When done, press the ► button to select
Rip, and then press the v button. The Rip
pop-up appears.
8.	 Press the v button to begin the ripping
process. The Ripping Completion Bar popup
appears.
9.	 When ripping is complete, the "Ripping is
completed" message appears. Press the v
button.
10.	 Press the RETURN button to go back to the
Playback screen.
|
| NOTE |
\
\ This function is not available with DTS Audio CD.
\
\ This function may not be supported by some discs.
\
\ This function will be encoded to the .mp3 format at
192kbps.
English 39 |
02235G-BD-ES6000,6000E-XN-ENG.indd 39 2012-03-21 오후 2:39:05
Page: 39
Media Play
Playing Photo Contents
You can play photo contents located on a DVD,
USB, mobile device or PC.
Using the Tools Menu
During playback, press the TOOLS button.
Go to Photos
List
Select to go to the list of photos on the
current media.
Start Slide
Show
Select to start the slide show.
Slide Show
Speed
Select to set a slide show's speed.
Slide Show
Effect
Select to set a slide show's special
effects.
Background
Music On
Select to listen to music while viewing
a slide show.
Background
Music Setting
Select to set the background music
setting.
Picture Mode
Select to set the picture settings.
-
- Dynamic : Choose to increase
Sharpness.
-
- Standard : Choose for most viewing
applications.
-
- Movie : This is the best setting for
watching movies.
-
- User : Lets you adjust the sharpness
and noise reduction function
respectively.
|
| NOTE |
\
\ When you use the BD wise function,
this menu will not appear.
Zoom
Select to enlarge the current picture.
(Enlarge up to 4 times)
Rotate
Select to rotate the picture. (This will
rotate the picture either clockwise or
counter clockwise.)
Selection Play See pages 40~42.
Login/Out See pages 40~42.
Information Shows the picture information.
|
| NOTE |
\
\ Depending on the disc or storage device, the Tools menu
may differ. All options may not be displayed.
\
\ To enable the background music function, the photo file
must be in the same storage media as the music file.
However, the sound quality can be affected by the bit rate
of the MP3 file, the size of the photo, and the encoding
method.
\
\ You can't enlarge the subtitle and PG graphic in the full
screen mode.
Using the Tools Menu when a file
is highlighted
When a file is highlighted, press the TOOLS
button.
View
Select to access the sort options: Artist,
Genre, Monthly, Latest Date, etc. The
sort options that appear depend on the
storage and media type.
Folder view
Appears in the View function screen.
Select to display the folders on the
storage device.
Title
Appears on the View function screen.
Select to sort all photo or video files on
a storage device by title.
Artist
Appears on the View function screen.
Select Artist to sort and then display
all music tracks on a storage device by
artist.
Album
Appears on the View function screen.
Select Album to sort and then display
all music tracks on a storage device by
album.
Genre
Appears on the View function screen.
Select Genre to sort and then display
all music tracks on a storage device by
genre.
Latest Date
Appears on the View function screen.
Select to sort and then display all photo
or video files on a storage device from
the latest to earliest date.
| 40 English
02235G-BD-ES6000,6000E-XN-ENG.indd 40 2012-03-21 오후 2:39:06
Page: 40
05
Media
Play
Earliest Date
Appears on the View function screen.
Select to sort and then display all photo
or video files on a storage device from
the earliest to latest date.
Monthly
Appears on the View function screen.
Select to sort all photo or video files on
a storage device by the month created.
Selection play
Selection Play lets you select specific
music, video, and photo files to play.
It works essentially the same for all
media. The example below is for
photos.
1.	 On the selection screen, use the
▲▼◄► buttons to select a
photo you want to view, and and
then press the v button.
A check mark appears to the left
of the picture.
2.	 Repeat Step 1 for each photo you
want to view.
3.	 To de-select a photo, highlight it,
and then press the v button.
4.	 When done, use the ◄► buttons
to select Play, and then press
the v button. A slide show
containing the photos you selected
begins.
5.	 To pause the slide show, press the
v button once. To restart the
slide show, press the v button
again.
6.	 To stop the slide show, press the
RETURN button.
|
| NOTE |
\
\ After the slide show begins, you can
control the slide show by pressing
the TOOLS button and displaying
the Slide Show menu. See "Using
the Tools Menu" page 40.
Send
Select Send to upload selected files
to Picasa, Facebook, Cloud Storage, N
Drive, or Family Story.
To use Send, you need to establish an
account with the on-line site, and then
log in using the Log In function.
1.	 Use the ▲▼◄► buttons to
select a file, and then press the
v button.
2.	 Repeat for each track or file you
want to upload.
|
| NOTE |
\
\ You can also move to Select All on
the right, and then press the v
button to select all tracks or files.
3.	 Select Send on the right side, and
then press the v button.
4.	 Use the ▲▼ buttons to select the
on line site you want to upload the
files or tracks to, and then press
the v button.
Login / Out
The Log In/Out function lets you log in
to your online Samsung account.
Add to Playlist
Select to create a playlist or add files
or tracks to a playlist.
1.	 Use the ▲▼◄► buttons to
highlight a track or file, and then
press the v button.
2.	 Repeat for each track or file you
want to add.
3.	 Select Add to Playlist on the right,
and then press the v button.
4.	 On the screen that appears,
perform one of the following
actions:
English 41 |
02235G-BD-ES6000,6000E-XN-ENG.indd 41 2012-03-21 오후 2:39:06
Page: 41
Media Play
Add to Playlist
(continued)
•	Select the Playlist to which you want
to add the tracks or files and then
press v button.
•	Select Create New, and then press
the v button. On the keyboard
pop-up that appears, create a name
for the new playlist. Enter numbers
using the numbers on the remote.
Enter letters by using the ▲▼◄►
buttons to move the cursor, and
then pressing the v button.
When finished, move to DONE at
the bottom of the screen, and then
press the v button.
Delete (Playlist)
Depending on the screen you are
viewing, select Delete to erase a file
from erasable media (such as a USB
device) or to delete a playlist.
Edit Playlist
Select Edit Playlist to remove files or
tracks from an existing playlist. The
storage device containing the playlist
must be inserted into or attached to
the player.
1.	 Use the ▲▼◄► buttons to
select a file, and then press the
v button.
2.	 Repeat for each track or file you
want to remove.
|
| NOTE |
\
\ You can also move to Select All on
the right, and then press the v
button to select all tracks or files.
3.	 Select Remove on the right side,
and then press the v button.
Play Current
Group
After you have sorted by Artist, Genre,
Album,Title, Latest Date, Earliest Date,
or Monthly, select a group that is the
result of the sort (for example, all
pictures taken in August), and then
select Play Current Group to play or
view the files in that group only.
Go to Playlist
Select to go to the Playlist section of
the Main AllShare screen.
Encoding
Encoding - which changes by language
or by geographical area - modifies
how the player sorts, arranges, and
presents files or tracks, displays dates,
etc. Select Encoding to change the
encoding to match your language or
geographical area.
Information
Displays media file and content
information.
|
| NOTE |
\
\ Depending on the disc or storage device, the Tools menu
may differ. All options may not be displayed.
| 42 English
02235G-BD-ES6000,6000E-XN-ENG.indd 42 2012-03-21 오후 2:39:06
Page: 42
06
Network
Services
Network Services
You can enjoy various network services such as
Smart Hub or BD-LIVE by connecting the player
to your network.
To use network services, you must first:
1.	 Connect the player to the network.
(See page 17)
2.	 Configure the network settings.
(See pages 25~27)
Using Smart Hub
Using Smart Hub, you can download movies,
videos, and music from the Internet, and access
various for pay or free-of-charge applications
and view them on your TV. Application content
includes news, sports, weather forecasts, stock
market quotes, maps, photos, and games.
For instructions that explain how to use Smart
Hub, follow these steps:
1.	 Go to www.samsung.com.
2.	 Click Support at the top of the page.
3.	 On the Support page, enter the model
number of your player into the Model Number
field, and then press the Enter button.
4.	 On the page that appears, click Get
downloads on the left side under Downloads.
The Download Centre appears.
5.	 On the Download Centre page, click the
Manuals tab.
6.	 On the Manuals tab, click the file icon to the
right of Smart Hub Users Manual. The manual
downloads.
|
| NOTE |
\
\ The web location of the Smart Hub manual is subject to
change without notice.
\
\ If the home page is updated or revised, the content
mentioned in the user manual may differ from the actual
menus.
Smart Hub at a Glance
1
Your Video : Provides recommendations for videos
based on your tastes.
2
Search : Provides an integrated search of your
video providers and connected AllShare devices.
3
Recommended : Displays recommended contents
managed by Samsung.
4
Commercial : Displays the Smart Hub Guide, an
introduction to the player, and new application
introductions.
5
Family Story : Effortless way to access family
content.
•	Provides access to family photos, messages, and
events, anytime and anywhere.
6
Fitness : Gateway to the Unified Self-Care Service.
•	Presents fitness videos from various content
partners with feedback on calories burned after
every workout.
7
Kids : Kids service gives kids an easy and safe way
to enjoy their favourite content.
•	Provides a wide variety of fun and safe content
for children.
8
Navigation Help : Displays the remote control
buttons you can use to navigate in Smart Hub.
•	RED (A) : To log in to Smart Hub.
•	GREEN (B) : To display the background screen.
•	Tools : To display the settings window.
•	Return : To return to the previous menu.
xxxxxxxx
Contents 1
xxxxxxxx
Contents 4
xxxxxxxx
Contents 3
xxxxxxxx
Contents 2
Samsung Apps Your Video Family Story Fitness Kids
a Login b Wallpaper / Tools ' Return
Search
5 6 7
0
9
1 2 4
8
3
English 43 |
02235G-BD-ES6000,6000E-XN-ENG.indd 43 2012-03-21 오후 2:39:07
Page: 43
Network Services
9
My Applications : Displays your personal gallery
of applications which you can add to, modify, and
delete.
0
Samsung Apps : Open Samsung Apps to download
various for pay or free-of-charge application
services.
Using the Web Browser
You can access the internet using the Web
Browser application which is installed in the Smart
Hub screen by default.
1.	 Select Smart Hub on the Home screen, and
then press the v button.
2.	 Select the Web Browser application in Smart
Hub, and then press the v button.
|
| NOTE |
\
\ When you run the Web Browser with the player connected
by HDMI to a BD Wise compatible TV - and BD Wise is on
- the browser is maximized to fill the screen and the TV's
resolution is set to the optimal resolution automatically.
\
\ The Web Browser is not compatible with Java
applications.
\
\ If you attempt to download a file, and the file can not be
saved, an error message will appear.
\
\ E-commerce, for purchasing proudcts online, is not
supported.
\
\ ActiveX is not supported.
\
\ Access may be blocked to some websites or to web
browsers operated by certain businesses.
Web Browser at a Glance
1
Control Panel : Displays the various Web Browser
functions.
•	 : Moves to the previous page.
•	 : Moves to the last page before going back.
•	 : Reloads the current page so that it is
refreshed on the screen.
•	 : Moves to the Home screen of the Web
Browser.
•	 : Allows you to zoom in or out of the screen at
various percentages.
•	 : Allows you to bookmark specific pages so
that you can move to them easily.
•	 : Allows you to view the history of your visited
pages by date, name, or frequency.
•	 http://www.google.com/ : Allows you to enter a
page address manually or select a page from the
visited page list to move to that page.
•	 : Allows you to switch easily between
multiple, currently open Web Browser windows.
•	 : Allows you to search for information by
entering words.
•	 : Lets you share the current site with your
family group by sending a message.
•	 : Allows you to configure all settings for using
the Web Browser.
Google Search I’m Feeling Lucky
b Control Panel c Switch to pointer Scroll Up/Scroll Down / Tools ' Return
http://www.google.com/
1
2
| 44 English
02235G-BD-ES6000,6000E-XN-ENG.indd 44 2012-03-21 오후 2:39:07
Page: 44
06
Network
Services
2
Navigation Help : Displays the remote control
buttons you can use to navigate in Web Browser.
•	GREEN (B) : To display the Control Panel.
•	YELLOW (C) : To switch the pointer.
•	( ) : Scroll Up/Scroll Down the page.
•	Tools : To display Tools window.
•	Return : To return to the previous menu.
BD-LIVE™
Once the player is connected to your network, you
can enjoy various movie-related service contents
available on BD-LIVE compliant discs.
1.	 Attach a USB memory stick to the USB jack
on the rear of the player, and then check
its remaining memory. The memory device
must have at least 1GB of free space to
accommodate the BD-LIVE services.
2.	 Select Settings on the Home screen, and
then press the v button.
3.	 Select Network, and then press the v
button.
4.	 Select BD Live Settings, and then press the
v button.
5.	 Select BD Data management, and then
press the v button.
6.	 Select Select Device, and then press the
v button.
7.	 Select USB, and then press the v button.
8.	 Insert a Blu-ray Disc that supports BD-LIVE.
9.	 Select an item from the list of BD-LIVE service
contents provided by the disc manufacturer.
|
| NOTE |
\
\ The way you use BD-LIVE and the provided contents may
differ, depending on the disc manufacturer.
English 45 |
02235G-BD-ES6000,6000E-XN-ENG.indd 45 2012-03-21 오후 2:39:07
Page: 45
Appendix
Compliance and Compatibility Notice
NOT ALL discs are compatible
•	Subject to the restrictions described below and those noted throughout this Manual, including the Disc
Type and Characteristics section of this user manual, disc types that can be played are: pre-recorded
commercial BD-ROM, DVD-VIDEO, and Audio CD (CD-DA); BD-RE/-R, DVD-RW/-R; and CD-RW/-R.
•	Discs other than the above cannot and/or is not intended to be played by this player. And some of the
above discs may not play due to one or more reasons provided below.
•	Samsung cannot assure that this player will play every disc bearing the BD-ROM, BD-RE/-R,
DVD-VIDEO, DVD-RW/-R, DVD+RW/+R and CD-RW/-R logos, and this player may not respond to
all operating commands or operate all features of every disc. These and other disc compatibility and
player operation issues with new and existing format discs are possible because:
-
- Blu-ray is a new and evolving format and this player may not operate all features of Blu-ray Discs
because some features may be optional, additional features may have been added to the Blu-
ray Disc format after the production of this player, and certain available features may be subject to
delayed availability;
-
- not all new and existing disc format versions are supported by this player;
-
- new and existing disc formats may be revised, changed, updated, improved and/or supplemented;
-
- some discs are produced in a manner that allows specific or limited operation and feature during
playback;
-
- some features may be optional, additional features may have been added after the production of this
player or certain available features may be subject to delayed availability;
-
- some discs bearing the BD-ROM, BD-RE/-R, DVD-VIDEO, DVD-RW/-R, DVD+RW/+R and
CD-RW/-R logos may still be non-standardized discs;
-
- some discs may not be played depending on their physical state or recording conditions;
-
- problems and errors can occur during the creation of Blu-ray Disc, DVD software and/or the
manufacture of discs;
-
- this player operates differently than a standard DVD player or other AV equipment; and/or
-
- for reasons noted throughout this user manual and for other reason(s) discovered and posted by
SAMSUNG customer care centre.
•	If you encounter disc compatibility or player operation problems, please contact SAMSUNG customer
care centre.
You may also contact SAMSUNG customer care centre for possible updates on this player.
•	For additional information on playback restrictions and disc compatibility, refer to the Precautions,
Before Reading the user manual, Disc Types and Characteristics, and Before Playing sections of this
user manual.
•	For Blu-ray Disc Player progressive scan output : CONSUMERS SHOULD NOTE THAT NOT
ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND
MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF PROGRESSIVE SCAN
PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO
THE 'STANDARD DEFINITION' OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET
COMPATIBILITY WITH THIS PRODUCT, PLEASE CONTACT OUR CUSTOMER SERVICE CENTRE.
| 46 English
02235G-BD-ES6000,6000E-XN-ENG.indd 46 2012-03-21 오후 2:39:08
Page: 46
07
Appendix
Copy Protection
•	Because AACS (Advanced Access Content System) is approved as content protection system for
Blu-ray Disc format, similar to use of CSS (Content Scramble System) for DVD format, certain
restrictions are imposed on playback, analogue signal output, etc., of AACS protected contents.
The operation of this product and restrictions on this product may vary depending on your time of
purchase as those restrictions may be adopted and/or changed by AACS after the production of this
product. Furthermore, BD-ROM Mark and BD+ are additionally used as content protection system for
Blu-ray Disc format, which imposes certain restrictions including playback restrictions for BD-ROM
Mark and/or BD+ protected contents. To obtain additional information on AACS, BD-ROM Mark, BD+,
or this product, please contact SAMSUNG customer care centre.
•	Many Blu-ray Disc/DVDs are encoded with copy protection. Because of this, you should only connect
your Player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from
copy-protected Blu-ray Disc/DVDs.
•	Under the U.S. Copyright laws and Copyright laws of other countries, unauthorized recording, use,
display, distribution, or revision of television programs, videotapes, Blu-ray Discs, DVDs, and other
materials may subject you to civil and/or criminal liability.
•	Cinavia Notice : This product uses Cinavia technology to limit the use of unauthorized copies of
some commercially-produced film and videos and their soundtracks. When a prohibited use of
an unauthorized copy is detected, a message will be displayed and playback or copying will be
interrupted.
More information about Cinavia technology is provided at the Cinavia Online Consumer Information
Centre at http://www.cinavia.com. To request additional information about Cinavia by mail, send a
postcard with your mailing address to: Cinavia Consumer Information Centre, P.O. Box 86851, San
Diego, CA, 92138, USA.
This product incorporates proprietary technology under licence from Verance Corporation and is
protected by U.S. Patent 7,369,677 and other U.S. and worldwide patents issued and pending as well
as copyright and trade secret protection for certain aspects of such technology. Cinavia is a trademark
of Verance Corporation. Copyright 2004-2010 Verance Corporation. All rights reserved by Verance.
Reverse engineering or disassembly is prohibited.
Network Service Disclaimer
All content and services accessible through this device belong to third parties and are protected by
copyright, patent, trademark and/or other intellectual property laws. Such content and services are
provided solely for your personal noncommercial use. You may not use any content or services in a
manner that has not been authorized by the content owner or service provider. Without limiting the
foregoing, unless expressly authorized by the applicable content owner or service provider, you may
not modify, copy, republish, upload, post, transmit, translate, sell, create derivative works, exploit, or
distribute in any manner or medium any content or services displayed through this device.
English 47 |
02235G-BD-ES6000,6000E-XN-ENG.indd 47 2012-03-21 오후 2:39:08
Page: 47
Appendix
THIRD PARTY CONTENT AND SERVICES ARE PROVIDED "AS IS." SAMSUNG DOES NOT WARRANT
CONTENT OR SERVICES SO PROVIDED, EITHER EXPRESSLY OR IMPLIEDLY, FOR ANY PURPOSE.
SAMSUNG EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED
TO, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. SAMSUNG
DOES NOT GUARANTEE THE ACCURACY, VALIDITY, TIMELINESS, LEGALITY, OR COMPLETENESS
OF ANY CONTENT OR SERVICE MADE AVAILABLE THROUGH THIS DEVICE AND UNDER NO
CIRCUMSTANCES, INCLUDING NEGLIGENCE, SHALL SAMSUNG BE LIABLE, WHETHER IN
CONTRACT OR TORT, FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, ATTORNEY FEES, EXPENSES, OR ANY OTHER DAMAGES ARISING OUT OF, OR IN
CONNECTION WITH, ANY INFORMATION CONTAINED IN, OR AS A RESULT OF THE USE OF ANY
CONTENT OR SERVICE BY YOU OR ANY THIRD PARTY, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.
Third party services may be terminated or interrupted at any time, and Samsung makes no representation
or warranty that any content or service will remain available for any period of time. Content and services
are transmitted by third parties by means of networks and transmission facilities over which Samsung
has no control. Without limiting the generality of this disclaimer, Samsung expressly disclaims any
responsibility or liability for any interruption or suspension of any content or service made available
through this device.
Samsung is neither responsible nor liable for customer service related to the content and services.
Any question or request for service relating to the content or services should be made directly to the
respective content and service providers.
Licence
•	Dolby and the double-D symbol are registered trademarks of Dolby Laboratories.
•	Manufactured under licence under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535
& other U.S. and worldwide patents issued & pending. DTS, the Symbol, & DTS and the
Symbol together are registered trademarks & DTS 2.0+Digital Out is a trademark of DTS,
Inc. Product includes software. © DTS, Inc. All Rights Reserved.
•	DivX
-
- ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a
subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit
divx.com for more information and software tools to convert your files into DivX videos.
-
- ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to
play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the
DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to
complete your registration.
-
- DivX Certified® to play DivX® video up to HD 1080p, including premium content.
DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries
and are used under license.
Covered by one or more of the following U.S. patents : 7,295,673; 7,460,668; 7,515,710; 7,519,274.
2.0+Digital Out
| 48 English
02235G-BD-ES6000,6000E-XN-ENG.indd 48 2012-03-21 오후 2:39:09
Page: 48
07
Appendix
•	The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI
Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United
States and other countries.
•	Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names
may be trademarks of their respective owners.
•	Open Source Licence Notice
-
- In the case of using open source software, Open Source Licences are available on the product
menu.
•	Blu-ray Disc™, Blu-ray™ and the logos are trademarks of the Blu-ray Disc Association.
•	This item incorporates copy protection technology that is protected by U.S. patents and other
intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited.
Recommendation - EU Only
•	Hereby, Samsung Electronics, declares that this BD Player is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC.
The official Declaration of Conformity may be found at http://www.samsung.com,
go to Support > Search Product Support and enter the model name.
This equipment may be operated in all EU countries.
In France, this equipment may only be used indoors.
English 49 |
02235G-BD-ES6000,6000E-XN-ENG.indd 49 2012-03-21 오후 2:39:10
Page: 49
Appendix
Additional Information
Note
Settings
3D Settings
•	For some 3D discs, to stop a movie during 3D playback, press the 5 button once. The movie
stops and the 3D mode option is de-activated.
To change a 3D option selection when you are playing a 3D movie, press the 5 button once.
The Blu-ray menu appears. Press the 5 button again, then select 3D Settings in the Blu-ray
menu.
•	Depending on the content and the position of the picture on your TV screen, you may see vertical
black bars on the left side, right side, or both sides.
TV Aspect Ratio
•	Depending on the disc type, some aspect ratios may not be available.
•	If you select an aspect ratio and option that is different than the aspect ratio of your TV screen,
the picture might appear to be distorted.
•	If you select the 16:9 Original, your TV may display 4:3 Pillarbox (black bars on sides of picture).
BD Wise (Samsung Players only)
•	When BD Wise is on, the Resolution setting automatically defaults to BD Wise and BD Wise
appears in the Resolution menu.
•	If the player is connected to a device that does not support BD Wise, you can not use the BD
Wise function.
•	For proper operation of BD Wise, set the BD Wise option of both the player and the TV to On.
Digital Output
•	Be sure to select the correct Digital Output or you will hear no sound or just loud noise.
•	If the HDMI device (AV receiver, TV) is not compatible with compressed formats (Dolby Digital,
DTS), the audio signal outputs as PCM.
•	Regular DVDs do not have BONUSVIEW audio and Navigation Sound Effects.
•	Some Blu-ray Discs do not have BONUSVIEW audio and Navigation Sound Effects.
•	This Digital Output setup does not affect the HDMI audio output to your TV.
It affects the optical and HDMI audio output when your player is connected to an AV receiver.
•	If you play MPEG audio soundtracks, the audio signal outputs as PCM regardless of your Digital
Output selections (PCM or Bitstream).
PCM Downsampling
•	Even when PCM Downsampling is set to Off, some discs will only output downsampled audio
through the optical digital outputs.
•	HDMI
-
- If your TV is not compatible with compressed multi-channel formats (Dolby Digital, DTS), the
player may output PCM 2ch downmixed audio even though you selected Bitstream (either
Reencoded or Unprocessed) in the setup menu.
-
- If your TV is not compatible with PCM sampling rates over 48kHz, the player may output
48kHz.
| 50 English
02235G-BD-ES6000,6000E-XN-ENG.indd 50 2012-03-21 오후 2:39:10

Question & answers

There are no questions about the Samsung BD-ES6000 yet.

Ask a question about the Samsung BD-ES6000

Have a question about the Samsung BD-ES6000 but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Samsung BD-ES6000. Please make sure that you describe your difficulty with the Samsung BD-ES6000 as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.