Samsung BD-D8500 manual

View a manual of the Samsung BD-D8500 below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Samsung
  • Product: Blu-ray player
  • Model/name: BD-D8500
  • Filetype: PDF
  • Available languages: Dutch, English, German, French

Table of Contents

Page: 0
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive a more complete service,
please register your product at
www.samsung.com/register
BD-HDD Combo
user manual
BD-D8200
BD-D8500
02063N-BD-D8200,D8500-XN-ENG-.in1 1 2011-03-04 오후 5:29:02
Page: 1
 English
Blu-ray™ Disc Features
Blu-ray Discs support the highest quality HD video
available in the industry - Large capacity means
no compromise on video quality.
The following Blu-ray Disc features are disc
dependant and will vary.
Appearance and navigation of features will also
vary from disc to disc.
Not all discs will have the features described
below.
For High-Definition Playback
To view high-definition contents on a Blu-ray Disc,
you need an HDTV (High Definition Television).
Some Blu-ray Discs may require you to use the
product’s HDMI OUT to view high-definition
content.
The ability to view high-definition content on
Blu-ray Discs may be limited depending on the
resolution of your TV.
BD-LIVE
You can use a Blu-ray Disc that supports
BD-LIVE to download content provided by the
disc manufacturer through a network connection.
BD-HDD Combo Features
3D
This product can play 3D contents through an
HDMI cable.
To implement the 3D effect, connect a 3D device
(3D-compliant AV receiver, 3D-compliant TV) to
the product using an HDMI cable, and play the 3D
content while wearing 3D vision glasses.
3D Conversion
When you play 2D contents, you can convert 2D
into 3D contents by pressing the 2D3D button
on the remote control.
Smart Hub
You can download various for pay or free-
of-charge applications through a network
connection. These applications provide a range
of Internet services and content including news,
weather forecasts, stock market quotes, games,
movies, and music.
AllShare
You can play videos, music, and photos saved on
your devices (such as your PC, mobile phones, or
NAS) through a network connection.
Playing multimedia files
You can use the USB connection to play various
kinds of multimedia files (MP3, JPEG, DivX, etc.)
located from a USB storage device.
Digital TV
This product have dual DTV Tuner. So user
can change DTV Programme during recording
a programme. As the benefit of dual tuner
eliminates the unconvinience of retaining
channel when you want to record it.
Functionalities related to Digital TV (DVB) are
only available in countries/areas where DVB-T
(MPEG2 and MPEG4 AVC) digital terrestrial
signals are broadcasted or where you are able
to access to a compatible DVB-C (MPEG2 and
MPEG4 AAC) cable-TV service. Please check
with your local dealer the possibility to receive
DVB-T or DVB-C signal.
DVB-T is the DVB European consortium
standard for the broadcast transmission of
digital terrestrial television and DVB-C is that for
the broadcast transmission of digital TV over
cable. However, some differentiated features like
EPG (Electric Programme Guide), VOD (Video
On Demand) and so on, are not included in this
specification. So, they cannot be workable at
this moment.
Some Digital TV functions might be unavailable
in some countries or regions and DVB-C might
not work correctly with some cable service
providers.
This product can record TV channel in HDD or
external devices.
•
•
•
•
•
Key features
02063N-BD-D8200,D8500-XN-ENG-.in2 2 2011-03-04 오후 5:29:02
Page: 2
English 
02
Safety
Information
Do not install this equipment in a confined space
such as a bookcase or similar unit.
WARNING
To prevent damage which may result in fire
or electric shock hazard, do not expose this
appliance to rain or moisture.
CAUTION
BD-HDD Combo USES AN INVISIBLE LASER
BEAM WHICH CAN CAUSE HAZARDOUS
RADIATION EXPOSURE IF DIRECTED. BE SURE
TO OPERATE BD-HDD Combo CORRECTLY AS
INSTRUCTED.
CAUTION
THIS PRODUCT UTILIZES A LASER. USE
OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY RESULT
IN HAZARDOUS RADIATION EXPOSURE. DO
NOT OPEN COVERS AND DO NOT REPAIR
YOURSELF. REFER SERVICING TO QUALIFIED
PERSONNEL.
This product satisfies CE regulations when
shielded cables and connectors are used to
connect the unit to other equipment. To prevent
electromagnetic interference with electric
appliances, such as radios and televisions, use
shielded cables and connectors for connections.
IMPORTANT NOTE
The mains lead on this equipment is supplied with
a molded plug incorporating a fuse. The value of
the fuse is indicated on the pin face of the plug.
If it requires replacing, a fuse approved to BS1362
of the same rating must be used.
Warning
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates “dangerous voltage”
inside the product that presents a risk of
electric shock or personal injury.
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK)
NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol indicates important instructions
accompanying the product.
Never use the plug with the fuse cover omitted
if the cover is detachable. If a replacement fuse
cover is required, it must be of the same colour as
the pin face of the plug. Replacement covers are
available from your dealer.
If the fitted plug is not suitable for the power points
in your house or the cable is not long enough to
reach a power point, you should obtain a suitable
safety approved extension lead or consult your
dealer for assistance.
However, if there is no alternative to cutting off the
plug, remove the fuse and then safely dispose of
the plug. Do not connect the plug to a mains jack,
as there is a risk of shock hazard from the bared
flexible cord.
To disconnect the apparatus from the mains, the
plug must be pulled out from the mains socket,
therefore the mains plug shall be readily operable.
The product unit accompanying this user manual
is licenced under certain intellectual property
rights of certain third parties. This licence is limited
to private non-commercial use by end-user
consumers for licenced contents.
No rights are granted for commercial use.
The licence does not cover any product unit other
than this product unit and the licence does not
extend to any unlicenced product unit or process
conforming to ISO/IEC 11172-3 or ISO/IEC
13818-3 used or sold in combination with this
product unit. The licence only covers the use
of this product unit to encode and/or decode
audio files conforming to the ISO/IEC 11172-3 or
ISO/IEC 13818-3. No rights are granted under this
licence for product features or functions that do
not conform to the ISO/IEC 11172-3 or ISO/IEC
13818-3.
Safety Information
02063N-BD-D8200,D8500-XN-ENG-.in3 3 2011-03-04 오후 5:29:02
Page: 3
 English
Safety Information
Precautions
Important Safety Instructions
Read these operating instructions carefully before
using the unit. Follow all the safety instructions
listed below.
Keep these operating instructions handy for future
reference.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any ventilation openings. Install
in accordance with the manufacturer’s
instructions.
Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including AV Receivers) that
produce heat.
Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade
or the third prong are provided for your safety.
If the provided plug does not fit into your
outlet, consult an electrician for replacement
of the obsolete outlet.
Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit
from the apparatus.
Only use attachments/accessories specified
by the manufacturer.
Use only with the cart,
stand, tripod, bracket,
or table specified by the
manufacturer, or sold with
the apparatus. When a cart
is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
Unplug this apparatus during lightning storms
or when unused for long periods of time.
Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way,
such as power-supply cord or plug is
damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does
not operate normally, or has been dropped.
Viewing using 3D function
IMPORTANT HEALTH AND SAFETY
INFORMATION FOR 3D PICTURES.
Read and understand the following safety
information before using the 3D function.
Some viewers may experience discomfort while
viewing 3D TV such as dizziness, nausea, and
headaches.
If you experience any such symptom, stop
viewing 3D TV, remove the 3D Active Glasses,
and rest.
Watching 3D images for an extended period of
time may cause eye strain. If you feel eye strain,
stop viewing 3D TV, remove your 3D Active
Glasses, and rest.
A responsible adult should frequently check on
children who are using the 3D function.
If there are any reports of tired eyes, headaches,
dizziness, or nausea, have the child stop viewing
3D TV and rest.
Do not use the 3D Active Glasses for other
purposes (such as general eyeglasses,
sunglasses, protective goggles, etc.)
Do not use the 3D function or 3D Active Glasses
while walking or moving around. Using the 3D
function or 3D Active Glasses while moving
around may cause you to bump into objects,
trip, and/or fall, and cause serious injury.
13.
14.
•
•
•
•
•
02063N-BD-D8200,D8500-XN-ENG-.in4 4 2011-03-04 오후 5:29:02
Page: 4
English 
02
Safety
Information
When displaying 3D programme with this
model, the actual screen may appear as shown
below:
Screen Display Description
Side by Side
Same screen duplicates
horizontally.
Top & Bottom
Same screen duplicates
vertically.
3D programme reception, recording and
playback of this model may not fully support
3D, due to the 3D broadcast format is not yet
standardized worldwide. It is not the product’s
malfunction or disorder.
Disc Storage & Management
Disc Handling
Disc Shape
Use discs with regular
shapes. If you use an irregular
disc (a disc with a special
shape), you can damage the product.
Holding discs
Avoid touching the surface of
a disc where data has been
recorded.
Blu-ray Discs
Do not leave a Blu-ray Disc in the product for
long periods of time. Remove the Blu-ray Disc
from the product and store it in its case.
Be careful not to scratch or leave fingerprints on
the surface of the Blu-ray Disc.
DVD-VIDEO, Audio CD (CD-DA)
Wipe off dirt or contamination on the disc with a
soft cloth.
•
•
•
•
•
•
•
Disc Storage
Be careful not to damage the disc because the
data on these discs is highly vulnerable to the
environment.
Do not keep under direct sunlight.
Keep in a cool ventilated area.
Store vertically.
Keep in a clean protection jacket.
If you move your product suddenly from a cold
place to a warm place, condensation may occur
on the operating parts and lens and cause
abnormal disc playback. If this occurs, unplug
the product, wait for two hours, and then
connect the plug to the power outlet. Then,
insert the disc, and try to play back again.
HDD (Hard Disk Drive)
The hard disk has a high storage density, which
enables long recording durations and quick
access to written data. However, it can easily be
damaged by shock, vibration or dust and should
be kept away from magnets.
To avoid losing important data, observe the
following precautions.
Do not use the BD-HDD Combo in a place
subject to extreme changes in temperature.
Do not apply a strong shock to the BD-HDD
Combo.
Do not place the BD-HDD Combo in a location
subject to mechanical vibrations or in an
unstable location.
Do not place the BD-HDD Combo on top of a
heat source.
Do not disconnect the AC power cord while the
power is on.
Do not attempt to change the hard disk. This
may result in a malfunction.
Should the hard disk be damaged, you cannot
recover lost data. The hard disk is only a
temporary storage space.
•
•
•
•
•
•
•
•
•
•
•
02063N-BD-D8200,D8500-XN-ENG-.in5 5 2011-03-04 오후 5:29:02
Page: 5
 English
Safety Information
Handling Cautions
Do not write on the printed side with a ball-point
pen or pencil.
Do not use record cleaning sprays or antistatic
sprays to clean discs. Also, do not use volatile
chemicals, such as benzene or thinner.
Do not apply labels or stickers to discs. (Do not
use discs fixed with exposed tape adhesive or
leftover peeled-off stickers.)
Do not use scratch-proof protectors or covers.
Do not use discs printed with label printers
available on the market.
Do not load warped or cracked discs.
Before connecting other components to this
product, be sure to turn them off.
Do not move the product while it is playing a
disc. The disc can be scratched or damaged
and the product’s internal parts can be
damaged.
Do not put a flower vase filled with water or any
small metal objects on the product.
Be careful not to put your hand into the disc
slot.
Do not place anything other than the disc in the
disc slot.
Interference from exterior sources such as
lightening and static electricity can affect
the normal operation of this product. If this
occurs, turn the product off and on again with
the POWER button, or disconnect and then
reconnect the AC power cord to the AC power
outlet. The product will operate normally.
Be sure to remove the disc and turn off the
product after use.
Disconnect the AC power cord from the AC
outlet when you don’t intend to use the product
for long periods of time.
To clean a disc, wipe it in a straight
line from the inside to the outside of
the disc.
Do not expose the product to any
liquid.
When the AC plug is connected to a wall outlet,
the product will still draw power (standby mode)
when it is turned off.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Apparatus shall not be exposed to dripping or
splashing and no objects filled with liquids, such
as vases, shall be placed on the apparatus.
The main plug is used as a disconnect device
and shall stay readily operable at any time.
Do not touch the power plug with a wet hand.
Otherwise, it can cause an electric shock.
Do not share one power socket with multiple
electric devices. Otherwise, it may cause an
overheat, resulting in a fire.
If you encounter an abnormal noise, burning
smell or smoke, turn off the power switch
immediately and disconnect the power plug
from the wall outlet. Then, contact the nearest
customer centre for technical assistance. If you
still use the product as it is, this may cause an
electric shock or fire.
Maintenance of Cabinet
Before you clean the Blu-ray Disc’s cabinet, be
sure to disconnect the AC power cord from the
AC outlet.
Do not use benzene, thinner, or other solvents
for cleaning.
Wipe the cabinet with a soft cloth.
Restrictions on Playback
This product may not respond to all operating
commands because some Blu-ray Disc, DVD,
and CD discs allow specific or limited operation
and provide only certain features during
playback.
Please note that this is not a defect in the
product.
Samsung cannot guarantee that this product
will play every disc bearing the Blu-ray Disc,
DVD or CD logo because disc formats evolve,
and problems and errors may occur during the
creation of Blu-ray Disc, DVD, and CD software
and/or the manufacture of discs.
Please contact the SAMSUNG customer care
centre if you have questions or encounter
difficulty in playing Blu-ray Disc, DVD, or CD
discs in this product. Also, refer to rest of
this user manual for additional information on
playback restrictions.
•
•
•
•
•
•
•
•
•
02063N-BD-D8200,D8500-XN-ENG-.in6 6 2011-03-04 오후 5:29:02
Page: 6
English 
ENGLISH
Contents
Key features 2	 Blu-ray™ Disc Features
2	 BD-HDD Combo Features
Safety Information 3	 Warning
4	 Precautions
4	 Important Safety Instructions
4	 Viewing using 3D function
5	 Disc Storage & Management
5	 Disc Handling
Getting Started 11	 Before using the User Manual
11	 Disc Types and Contents your product can play
11	 Disc types your product cannot play
12	 HDD Recording
12	 Disc Types
13	 Region Code
14	 Supported File Formats
17	 Connect a USB device before using the Time shift
and Recorded TV functions
17	 Blu-ray Disc Compatibility
17	 Copyright
18	 Logos of Discs the Product Can Play
18	 Accessories
19	 Front Panel
20	 Rear Panel
21	 Remote Control
21	 Tour of the Remote Control
22	 Setting the Remote Control to Operate Your TV
23	 TV Control Codes
Connections 24	 Connecting to a TV with an Audio/Video cables
and RF cable
25	 Connecting to a TV
25	 Case 1 : Connecting to a TV with an HDMI Cable
- Best Quality (Recommended)
26	 Case 2 : Connecting to a TV with a Component
Cable - Better Quality
27	 Case 3 : Connecting to a TV with an Audio/Video
cable - Good Quality
02063N-BD-D8200,D8500-XN-ENG-.in7 7 2011-03-04 오후 5:29:02
Page: 7
 English
Contents
Connections 28	 Connecting to an Audio System
28	 Case 1 : Connecting to an Audio System
(HDMI supported AV receiver) - Best Quality
(Recommended)
29	 Case 2 : Connecting to an Audio System
(Stereo Amplifier) - Good Quality
29	 Case 3 : Connecting to an Audio System
(AV receiver with Dolby Digital or DTS decoder)
- Better Quality
30	 Connecting to the Network
30	 Cable Network
31	 Wireless Network
Setup 32	 Before Starting (Plug & Play)
32	 Accessing the Settings Menu
33	 Watch TV
33	 Channel List
34	 Channel Manager
35	 Settings
35	 Display
39	 Audio
42	 Channel
44	 Network
48	 System
50	 Language
50	 Security
51	 General
51	 Support
53	 Contact Samsung
Basic Functions 53	 Playing a Video
53	 Playback
53	 3D Converter
54	 Disc Structure
55	 Using the Disc Menu/Title Menu/Popup Menu
55	 Using the Disc Menu
55	 Using the Title Menu
55	 Playing the Title List
55	 Using the Popup Menu
02063N-BD-D8200,D8500-XN-ENG-.in8 8 2011-03-04 오후 5:29:02
Page: 8
English 
ENGLISH
Basic Functions 55	 Using the Search and Skip Functions
55	 Searching for a Desired Scene
56	 Skipping Chapters
56	 Slow Motion Play/Step Motion Play
56	 Slow Motion Play
56	 Step Motion Play
56	 Using the TOOLS button
56	 Moving to a Desired Scene Directly
57	 Repeating the Title or Chapter
57	 Repeating the Title or Chapter
57	 Repeating a Section
57	 Selecting the Picture Settings
58	 Selecting the Audio Language
58	 Selecting the Subtitle Language
59	 Changing the Camera Angle
59	 Selecting the Information
59	 Setting BONUSVIEW
59	 Listening to Music
59	 Playing an Audio CD (CD-DA)/MP3
60	 AMG function
60	 Repeat an Audio CD (CD-DA)/MP3
60	 Playlist
61	 Playing back a Pictures
61	 Playing JPEG files
61	 Using the TOOLS button
62	 Media Play
DTV Functions 63	 Display Screen
63	 Using the TOOLS button
63	 Picture Settings
63	 Selecting the Audio Language
64	 Selecting the Dual I II
64	 Lock current channel
64	 Switch to Cable
64	 Add to Favourites
64	 Signal Information
02063N-BD-D8200,D8500-XN-ENG-.in9 9 2011-03-04 오후 5:29:03
Page: 9
10 English
Contents
DTV Functions 64	 Setting Audio Description & Subtitle Language
64	 Setting the Audio Description
64	 Setting the Subtitle Language
65	 Viewing the Guide Screen
65	 Schedule Manager
66	 To Cancel or Edit Schedule
66	 Viewing DTV with the 3D effect
67	 Using the Teletext Service
Advanced Functions 68	 Recording
68	 Recording the current TV channel you are
watching
69	 Watching other channels during Recording a TV
channel
69	 Playing a Disc while Recording a TV channel
69	 Time Shift function
70	 Playing the Recorded Title
71	 Edit the Recorded Title
71	 Renaming a Recorded Title
71	 Splitting a Section of a Title (Divide into two)
71	 Splitting a Section of a Title (Partial Delete)
72	 Copy
72	 Copying Videos, Music or Photos
72	 Ripping from a Audio CD (CD-DA)
Network Services 73	 Using Smart Hub
73	 Starting Smart Hub for the First Time
76	 The Settings Menu - BLUE (D)
78	 The Edit Mode Menu - YELLOW (C)
80	 The Sort Menu - GREEN (B)
80	 Samsung Apps
80	 For Pay Apps
82	 BD-LIVE™
82	 Using the AllShare Function
Appendix 83	 Troubleshooting
85	 Repairs
86	 Specifications
02063N-BD-D8200,D8500-XN-ENG-.in10 10 2011-03-04 오후 5:29:03
Page: 10
English 11
03
Getting
Started
Before using the User Manual
Disc Types and Contents your product can play
Term Logo Icon Definition
VIDEO
h
z
Indicates a function available on a BD-ROM or BD-RE/-R disc recorded in the BD-RE
format.
Z
�
Indicates a function available on a DVD-VIDEO or recorded DVD+RW/
DVD-RW(V)/DVD-R/+R discs that have been recorded and finalized.
- � Indicates a function available in a CD-RW/-R, DVD-RW/-R, BD-RE/-R disc or a USB
storage media containing DivX, MKV, MP4 contents.
MUSIC
o Indicates a function available on an audio CD-RW/-R (CD-DA format).
- � Indicates a function available in a CD-RW/-R, DVD-RW/-R, BD-RE/-R disc or a USB
storage media containing MP3 or WMA contents.
PHOTO - G Indicates a function available in a CD-RW/-R, DVD-RW/-R, BD-RE/-R disc or a USB
storage media containing JPEG contents.
VIDEO
MUSIC
PHOTO
- T Indicates a function available on the HDD.
NOTE
The product may not play certain CD-RW/-R and DVD-R because of the disc type or recording conditions.
If a DVD-RW/-R disc has not been recorded properly in DVD video format, it will not be playable.
Your product will not play content that has been recorded on a DVD-R at a bit-rate that exceeds 10 Mbps.
Your product will not play content that has been recorded on a BD-R or USB device at a bit rate that exceeds 30 Mbps.
Disc types your product cannot play
HD DVD
DVD-ROM/PD/
MV-Disc, etc
•
•
DVD-RAM
Super Audio CD
(except CD layer)
•
•
DVD-RW(VR mode)
CVD/CD-ROM/CDV/
CD-G/CD-I/LD
(CD-Gs play audio only,
not graphics.)
•
•
3.9 GB DVD-R Disc for
Authoring.
•
✎
▪
▪
▪
▪
Getting Started
02063N-BD-D8200,D8500-XN-ENG-.in11 11 2011-03-04 오후 5:29:04
Page: 11
12 English
Getting Started
NOTE
Some commercial discs and DVDs purchased
outside your region may not play on this product.
Playback may not work for some types of discs, or
when you use specific operations, such as angle
change and aspect ratio adjustment. Information
about the discs is written in detail on the disc box.
Please refer to this if necessary.
Do not allow the disc to become dirty or scratched.
Fingerprints, dirt, dust, scratches or deposits of
cigarette smoke on the recording surface may make
it impossible to use the disc for playback.
When you play a BD-J title, loading may take longer
than a normal title or some functions may perform
slowly.
This product may not respond to all operating
commands because some Blu-ray Disc, DVD, and
CD discs allow specific or limited operation and
provide only certain features during playback.
Please note that this is not a defect in the product.
Samsung cannot guarantee that this product will
play every disc bearing the Blu-ray Disc, DVD or CD
logo because disc formats evolve, and problems and
errors may occur during the creation of Blu-ray Disc,
DVD, and CD software and/or the manufacture of
discs.
Please contact the SAMSUNG customer care centre
if you have questions or encounter difficulty when
playing Blu-ray Disc, DVD, or CD discs in this
product. Also, refer to rest of this user manual for
additional information on playback restrictions.
HDD Recording
You can record digital broadcast on the internal
HDD as below.
Broadcast
Type
BD-D8200 (250GB) BD-D8500 (500GB)
Recording
Time
Estimated
Bitrate
Recording
Time
Estimated
Bitrate
HD 64 Hrs 8 Mbps 130 Hrs 8 Mbps
SD 102 Hrs 5 Mbps 208 Hrs 5 Mbps
Depending on the bitrate of broadcast
programme, available recording time may be
decreased or increased.
✎
▪
▪
▪
▪
▪
▪
Disc Types
BD-ROM
Blu-ray ROM discs can only be played back.
This product can play back pre-recorded
commercial BD-ROM discs.
BD-RE/-R
Blu-ray RE/-R discs can be recorded on and
played back.
This product can play back a BD-RE/-R disc
recorded by other compatible Blu-ray Disc
recorders.
DVD-VIDEO
This product can play back pre-recorded
commercial DVDs (DVD-VIDEO discs) with
movies.
When switching from the first layer to the
second layer of a dual-layered DVD-VIDEO disc,
there may be momentary distortion in the image
and sound. This is not a malfunction of the
product.
DVD-RW/-R/+R
This product can play back a DVD-RW/-R/+R disc
recorded and finalized with a DVD video recorder.
The ability to play back may depend on recording
conditions.
DVD+RW
This product can play back a DVD+RW disc
recorded with a DVD Video recorder. The
ability to play back may depend on recording
conditions.
Audio CD (CD-DA)
This product can play back CD-DA format audio
CD-RW/-R discs.
The product may not be able to play some
CD-RW/-R discs due to the condition of the
recording.
•
•
•
•
•
02063N-BD-D8200,D8500-XN-ENG-.in12 12 2011-03-04 오후 5:29:04
Page: 12
English 13
03
Getting
Started
CD-RW/-R
Use a 700MB (80 minute) CD-RW/-R disc.
If possible, do not use an 800MB (90 minute) or
larger disc, as the disc may not play back.
If the CD-RW/-R disc was not recorded as a
closed session, you may experience delays
when playing back the beginning of the disc or
all recorded files may not play.
Some CD-RW/-R discs may not play on this
product, depending on the device which was
used to burn them. For contents recorded on
CD-RW/-R media from CDs for your personal
use, playability may vary depending on the
contents and discs.
AVCHD (Advanced Video Codec High
Definition)
This product can play back AVCHD format
discs. These discs are normally recorded and
used in camcorders.
The AVCHD format is a high definition digital
video camera format.
The MPEG-4 AVC/H.264 format compresses
images with greater efficiency than the
conventional image compressing format.
Some AVCHD discs use the “x.v.Colour” format.
This product can play back AVCHD discs that
use “x.v.Colour” format.
“x.v.Colour” is a trademark of Sony Corporation.
“AVCHD” and the AVCHD logo are trademarks
of Matsushita Electronic Industrial Co., Ltd. and
Sony Corporation.
NOTE
Some AVCHD format discs may not play, depending
on the recording condition.
AVCHD format discs need to be finalized.
“x.v.Colour” offers a wider colour range than normal
DVD camcorder discs.
Some DivX, MKV and MP4 format discs may not
play, depending on the video resolution and frame
rate condition.
•
•
•
•
•
•
•
•
•
✎
▪
▪
▪
Region Code
Both products and discs are coded by region.
These regional codes must match for a disc to
play. If the codes do not match, the disc will not
play.
The Region Number for this product is displayed
on the rear panel of the product.
Disc Type
Region
Code
Area
Blu-ray Disc
a
North America, Central America,
South America, Korea, Japan,
Taiwan, Hong Kong and South
East Asia.
b
Europe, Greenland, French
territories, Middle East, Africa,
Australia and New Zealand.
c India, China, Russia, Central
and South Asia.
DVD-VIDEO
1 The U.S., U.S. territories and
Canada
2 Europe, Japan, the Middle East,
Egypt, South Africa, Greenland
3 Taiwan, Korea, the Philippines,
Indonesia, Hong Kong
4
Mexico, South America,
Central America, Australia,
New Zealand, Pacific Islands,
Caribbean
5
Russia, Eastern Europe, India,
most of Africa, North Korea,
Mongolia
6 China
02063N-BD-D8200,D8500-XN-ENG-.in13 13 2011-03-04 오후 5:29:04
Page: 13
14 English
Getting Started
Supported File Formats
Notes on the USB connection
Supported devices: USB storage media, MP3
product, digital camera, USB card reader
Does not support if a folder or file name is
longer than 128 characters.
A certain USB/digital camera device may not be
compatible with the product.
FAT16, FAT32 and NTFS file systems are
supported.
Connect directly to the product's USB port.
Connecting through another cable may raise
problems with USB compatibility.
Inserting more than one memory device to a
multi-card reader may not operate properly.
Supports the PTP protocol.
Do not disconnect USB device during a
"loading" process.
Bigger the image resolution, the longer the delay
to displaying.
DRM applied MP3 files downloaded from a
commercial site are not played back.
If the problem of the unrecognized USB device
persists or the internal file list is corrupt or a
certain file could not be played, connect the
USB device to the PC and format it in a proper
file system, then check it again.
If the file deleted from your PC still appears in
Media Play, use “Empty Recycle Bin” on your
desktop to delete it completely.
Some USB devices supporting the power saving
mode may switch the saving mode of the BD
product to Off automatically when connected
with each other.
Need-to-Know List before using Media Play
Media Play only supports USB Mass Storage
Class (MSC) devices. MSC is a Mass Storage
Class Bulk-Only Transport device. Examples
of MSC are Thumb drives, Flash Card Readers
and USB HDD. (HUB is not supported.)
MSC supports Music, Photo and Video files,
while a PTP device supports Photo files only.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
-
-
MTP (Media Transfer Protocol) is not
supported.
The file system supports FAT16, FAT32 and
NTFS (read only).
Before connecting your device to the product,
please back up your files to prevent them
from damage or loss of data. SAMSUNG is
not responsible for any data file damage or
data loss.
Do not disconnect the USB device while it is
loading.
If some devices require excessive power, USB
device may be limited by the circuit safety
device.
You must remove the USB storage device
safely (by performing the “Safely Remove USB”
function) in order to prevent a possible damage
to the USB memory. Press the MENU button
to move to the home menu, and select the
YELLOW (C) button and press the ENTER
button.
If you insert the disc when playing USB storage
device, the device mode is changed to “DVD or
CD” automatically.
When the Audio CD (CD-DA), MP3 and JPEG
files are in stop mode, you can’t see full screen
by pressing the FULL SCREEN button on the
remote control.
A Certain USB HDD Device may not be
compatible with this product.
-
-
-
-
-
•
•
•
•
02063N-BD-D8200,D8500-XN-ENG-.in14 14 2011-03-04 오후 5:29:04
Page: 14
English 15
03
Getting
Started
Video File Support
File
Extention
Container Video Codec Resolution
Frame rate
(fps)
Bit rate
(Mbsp)
Audio Codec
*.avi AVI
DivX 3.11/4.x/5.1/6.0 1920x1080 6 ~ 30 8 MP3
AC3
LPCM
ADPCM
DTS Core
XviD 1920x1080 6 ~ 30 8
H.264 BP/MP/HP 1920x1080 6 ~ 30 25
MPEG4 SP/ASP 1920x1080 6 ~ 30 8
Motion JPEG 1920x1080 6 ~ 30 8
*.mkv MKV
DivX 3.11/4.x/5.1/6.0 1920x1080 6 ~ 30 8 MP3
AC3
LPCM
ADPCM
DTS Core
XviD 1920x1080 6 ~ 30 8
H.264 BP/MP/HP 1920x1080 6 ~ 30 25
MPEG4 SP/ASP 1920x1080 6 ~ 30 8
Motion JPEG 1920x1080 6 ~ 30 8
*.asf ASF
DivX 3.11/4.x/5.1/6.0 1920x1080 6 ~ 30 8 MP3
AC3
LPCM
ADPCM
WMA
XviD 1920x1080 6 ~ 30 8
H.264 BP/MP/HP 1920x1080 6 ~ 30 25
MPEG4 SP/ASP 1920x1080 6 ~ 30 8
Motion JPEG 1920x1080 6 ~ 30 8
*.wmv ASF Window Media Video v9 1920x1080 6 ~ 30 25 WMA
*.mp4 MP4
H.264 BP/MP/HP 1920x1080 6 ~ 30 25 MP3
ADPCM
AAC
MPEG4 SP/ASP 1920x1080 6 ~ 30 8
XVID 1920x1080 6 ~ 30 8
*.3gp 3GPP
H.264 BP/MP/HP 1920x1080 6 ~ 30 25 ADPCM
AAC
HE-AAC
MPEG4 SP/ASP 1920x1080 6 ~ 30 8
*.vro
VRO
VOB
MPEG2 1920x1080 24/25/30 30 AC3
MPEG
LPCM
MPEG1 352x288 24/25/30 30
*.mpg
*.mpeg
PS
MPEG1 352x288 24/25/30 30 AC3
MPEG
LPCM
AAC
MPEG2 1920x1080 24/25/30 30
H.264 1920x1080 6 ~ 30 25
*.ts
*.tp
*.trp
TS
MPEG2 1920x1080 24/25/30 30 AC3
AAC
MP3
DD+
HE-AAC
H.264 1920x1080 6 ~ 30 25
VC1 1920x1080 6 ~ 30 25
02063N-BD-D8200,D8500-XN-ENG-.in15 15 2011-03-04 오후 5:29:04
Page: 15
16 English
Getting Started
Limitations
Even when the file is encoded by a supported
codec mentioned above, a file might not be
played if its content has a problem.
Normal playback is not guaranteed if the file's
container information is wrong or the file itself is
corrupted.
Files having higher Bit rate/frame rate than
standard may stutter with sound/video
playback.
Seek (skip) function is not available if the file's
index table is damaged.
When you playback a file remotely through
network connection, video playback may stutter
depending on established network speed.
Video decoder
Supports up to H.264 Level 4.1
Does not support H.264 FMO/ASO/RS, VC1
SP/MP/AP L4 and AVCHD
XVid, MPEG4 SP, ASP:
Below 1280x720: 60 frames max
Above 1280x720: 30 frames max
Does not support GMC 2 or higher
Music File Support
File
Extension
Container
Audio
Codec
Support Range
*.mp3 MP3 MP3 -
*.wma WMA WMA
Compliant with
WMA version 10
* 
Sampling rates (in
kHz) - 8, 11, 16,
22, 32, 44.1, 48
* 
Bit rates - All bit-
rates in the range
5kbps to 384kbps

-
-
-
-
-

-
-
-
-
Audio decoder
Supports WMA 7, 8, 9 and STD
Does not support WMA 9 PRO multi-channel
lossless audio decoding if number of channels
is more than 2
Does not support WMA sampling rate of
220/50Hz mono
Supports DTS Core (5.1 ch, 16 bit, 48kHz) only
Does not support APDCM MULAW, ALAW
Optical Media
CD Media
Bit Rate : Max 9.6Mbps
DVD Media
Bit Rate : Max 22.16Mbps

-
-
-
-
-

-
-
02063N-BD-D8200,D8500-XN-ENG-.in16 16 2011-03-04 오후 5:29:04
Page: 16
English 17
03
Getting
Started
Connect a USB device before
using the Time shift and Recorded
TV functions
Do not use a USB memory stick. We do not
support a USB memory stick.
We recommend using a USB HDD with at
least 5400 rpm, but a USB HDD of RAID type
is not supported.
•
•
To use the Time shift mode or the Recorded
TV function, a connected USB device must be
execute the Device Format function to proper
form for recording.
During the device formatting, do not
disconnect the device while formatting is in
progress. If you format the device, all files will
be deleted.
Before formatting your device to this product,
please back up your files to prevent them
from damage or loss of data. SAMSUNG is
not responsible for any data file damage or
data loss.
Recorded videos are DRM (digital rights
managements) protected and cannot be played
on a PC or other product. Note that files saved
on the TV cannot be used after the main board
is changed.
If available storage is left less than 10MB
during the recording, recording is finished
automatically.
If the USB device has failed the Device
Performance Test, the USB device must
go through the Device Format and Device
Performance Test again before you record with
the Guide or Channel Manager.
For more information, see your user’s manual.
•
-
-
•
•
•
•
Blu-ray Disc Compatibility
Blu-ray Disc is a new and evolving format.
Accordingly, disc compatibility issues are possible.
Not all discs are compatible and not every disc will
play back. For additional information, refer to the
Compliance and Compatibility Notice section of
this user manual.
Copyright
© 2011 Samsung Electronics Co.,Ltd.
All rights reserved; No part or whole of this user’s
manual may be reproduced or copied without the
prior written permission of Samsung Electronics
Co.,Ltd.
02063N-BD-D8200,D8500-XN-ENG-.in17 17 2011-03-04 오후 5:29:04
Page: 17
18 English
Getting Started
Logos of Discs the Product Can Play
Blu-ray Disc 3D Blu-ray Disc DTS-HD Master Audio DivX
BD-LIVE Dolby TrueHD
PAL broadcast System in U.K.,
France, Germany, etc.
Java
Accessories
Check for the supplied accessories below.
BD-HDD/TV
2D�3D
0000-000000
POWER
1 2 3
4 5 6
7 8 9
DISC MENU TITLE MENU
0
TTX/MIX
BD TV
TIME SHIFT
TV VOL PROG
TV SOURCE
1
1
CH LIST
SMART
GUIDE
i
MENU
2D�3D
FULL
SCREEN
A B C D
INFO
TOOLS
EXIT
RETURN
...
?
×
HUB
SEARCH
AD/
SUBTITLE REC PAUSE
REC
AUDIO
TV MUTE
TV
POWER
Audio/Video cable RF cable for TV
Batteries for Remote Control (AAA Size) User Manual Remote Control
02063N-BD-D8200,D8500-XN-ENG-.in18 18 2011-03-04 오후 5:29:06
Page: 18
English 19
03
Getting
Started
Front Panel
1 REMOTE CONTROL SENSOR Detects signals from the remote control.
2 POWER BUTTON Turns the product on and off.
3 DISC SLOT Inserts a disc.
4 DISPLAY Displays the playing status, time, etc.
5 STOP BUTTON Stops disc playback.
6 PLAY/PAUSE BUTTON Plays a disc or pauses playback.
7 ENTER BUTTON Selects menu items or starts a disc.
8 EJECT BUTTON Ejects a disc.
9 common Interface Slot To watch paid channels, insert the CI CAM with CI or CI+ CARD.
10 USB HOST It can be used for software upgrades and MP3/JPEG/DivX/MKV/MP4 playback.
NOTE
When the product displays the Blu-ray Disc menu, you may not start the movie by pressing the Play button on the
product or the remote. To play the movie, you must select Play Movie or Start in the disc menu, and then press the
ENTER button.
You must obtain a “CI CAM with CI or CI+ CARD” from a local cable service provider.
✎
▪
▪
a bc d efgh
j i
02063N-BD-D8200,D8500-XN-ENG-.in19 19 2011-03-04 오후 5:29:06
Page: 19
20 English
Getting Started
When removing the “CI CAM with CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI CAM
with CI or CI+ CARD” may cause damage to it.
Insert the “CI CAM with CI or CI+ CARD” in the direction marked on the card.
The location of the CI card slot may be different depending on the model.
“CI CAM with CI or CI+ CARD” is not supported in some countries and regions; check with your authorized dealer.
If you have any problems, please contact a service provider.
Rear Panel
1 ANT OUT (TO TV) Connects RF cable to TV antenna input.
2 ANT IN Connects RF cable from antenna.
3 LAN
Use for network based services (See pages 73~82), BD-LIVE, and software
upgrades using a network connection.
4 COMPONENT OUT Connects to external devices that have Component video input.
5
DIGITAL AUDIO OUT
(OPTICAL)
Connects to an AV receiver.
6 VIDEO OUT Connects to the video input of external devices using a video cable.
7 AUDIO OUT Connects to the audio input of external devices using audio cables.
8 HDMI OUT
Using an HDMI cable, connect this HDMI output terminal to the HDMI input terminal
on your TV for the best quality picture or to your AV receiver for the best quality
sound.
▪
▪
▪
▪
e
g f
h
a b c d
02063N-BD-D8200,D8500-XN-ENG-.in20 20 2011-03-04 오후 5:29:06
Page: 20
English 21
03
Getting
Started
Remote Control
Tour of the Remote Control
Press this to operate a TV.
Turn the product on and off.
Press to use Tools menu.
Return to the previous menu.
Press numeric buttons to operate options or
to access channels directly.
Use to enter the disc menu.
Press this to operate BD-HDD Combo.
Press to use Smart Hub.
Press to move to the home menu.
Use to select menu items and change
menu value.
Turn the TV on and off.
(To operate your TV, please refer to pages
22~23)
Press to exit the menu.
Alternately selects Teletext, Double or Mix.
Use to enter the popup menu/title menu.
Press this when you want to use 3D function.
After setup, allows you to set the input
source on your TV.
Press this to display the playback information
during playing a Blu-ray Disc/DVDs or
display the information of TV channel.
These buttons are used both for menus on
the product and also several Blu-ray Disc
functions.
Press to search backwards or forwards.
Press to skip backwards or forwards.
Stops playback or recording.
TV volume adjustment.
Mutes the speakers of your TV.
Displays channel lists on the screen.
Press this to pause a playback or pause the
Time Shift function.
Press this to play or start the Time Shift
function.
Press this to select a TV channel.
Displays the EPG (Electronic Programme
Guide.)
Press this to set audio description and
subtitle.
Press this to pause during recording.
BD-HDD/TV
2D3D
0000-000000
POWER
1 2 3
4 5 6
7 8 9
DISC MENU TITLE MENU
0
TTX/MIX
BD TV
TIME SHIFT
TV VOL PROG
TV SOURCE
1
1
CH LIST
SMART
GUIDE
i
MENU
2D3D
FULL
SCREEN
A B C D
INFO
TOOLS
EXIT
RETURN
...
?
×
HUB
SEARCH
AD/
SUBTITLE REC PAUSE
REC
AUDIO
TV MUTE
TV
POWER
Press to eject a disc.
Press this to make a recording.
Press to search contents.
Press this to see the full screen on a TV.
Press this to set audio.
02063N-BD-D8200,D8500-XN-ENG-.in21 21 2011-03-04 오후 5:29:07
Page: 21
22 English
Getting Started
Setting the Remote Control to
Operate Your TV
To determine whether your television is
compatible, follow the instructions below.
Turn your television on.
Point the remote control towards the
television.
Press the TV button to set the TV mode.
Press and hold the TV POWER button, and
then enter the two-figure code in the table
to the right that corresponds to the brand of
your television by pressing the appropriate
number buttons.
If your television is compatible with the remote
control, it will Turn off.
The remote is now programmed to operate
the TV.
NOTE
If several codes are listed for your television brand,
try each one in turn until you find one that works.
If you replace the remote control’s batteries, you
must set the brand code again.
You can control certain functions of your TV with
this remote control.
Button Function
TV POWER Used to Turn the television on and off.
Number Used to input number directly.
TV VOL +/–
Used to adjust the volume of the
television.
TV MUTE Used to toggle the sound on and off.
PROG (,/.) Used to select the desired channel.
TV SOURCE
Used to select an external source
connected to the TV.
1.
2.
3.
4.
✎
▪
▪
In case of Samsung TV, below buttons are also
compatible with this remote control.
Button Function
MENU Used to move to the TV menu.
TOOLS Used to display Tools menu.
▲▼◄►
Used to move the cursor or select an
item.
ENTER Used to select menu items.
INFO Used to display INFO menu.
RETURN Return to the previous menu.
EXIT Used to exit the menu.
COLOUR (A,B,C,D)
These buttons are used for several
functions.
NOTE
The functions listed above will not necessarily work
on all televisions. If you encounter problems, use the
TV remote control.
Installing batteries
NOTE
If the remote does not operate properly:
Check the polarity +/– of the batteries.
Check if the batteries are drained.
Check if the remote sensor is blocked by
obstacles.
Check if there is any fluorescent lighting nearby.
CAUTION
Dispose of batteries according to local environmental
regulations. Do not put them in the household trash.
✎
▪
✎
▪
•
•
•
•
!
▪
02063N-BD-D8200,D8500-XN-ENG-.in22 22 2011-03-04 오후 5:29:07
Page: 22
English 23
03
Getting
Started
TV Control Codes
Brand Code
SAMSUNG
TV POWER+01, +02, +03, +04, +05,
+06, +07, +08, +09
AIWA TV POWER+82
ANAM
TV POWER+10, +11, +12, +13, +14,
+15, +16, +17, +18
BANG &
OLUFSEN
TV POWER+57
BLAUPUNKT TV POWER+71
BRANDT TV POWER+73
BRIONVEGA TV POWER+57
CGE TV POWER+52
CONTINENTAL
EDISON
TV POWER+75
DAEWOO
TV POWER+19, +20, +23, +24, +25, +26,
+27, +28, +29, +30, +31, +32, +33, +34
EMERSON TV POWER+64
FERGUSON TV POWER+73
FINLUX TV POWER+06, +49, +57
FORMENTI TV POWER+57
FUJITSU TV POWER+84
GRADIENTE TV POWER+70
GRUNDIG TV POWER+49, +52, +71
HITACHI TV POWER+60, +72, +73, +75
IMPERIAL TV POWER+52
JVC TV POWER+61, +79
LG TV POWER+06, +19, +20, +21, +22, +78
LOEWE TV POWER+06, +69
LOEWE OPTA TV POWER+06, +57
MAGNAVOX TV POWER+40
METZ TV POWER+57
MITSUBISHI TV POWER+06, +48, +62, +65
MIVAR TV POWER+52, +77
NEC TV POWER+83
Brand Code
NEWSAN TV POWER+68
NOBLEX TV POWER+66
NOKIA TV POWER+74
NORDMENDE TV POWER+72, +73, +75
PANASONIC TV POWER+53, +54, +74, +75
PHILIPS TV POWER+06, +55, +56, +57
PHONOLA TV POWER+06, +56, +57
PIONEER TV POWER+58, +59, +73, +74
RADIOLA TV POWER+06, +56
RADIOMARELLI TV POWER+57
RCA TV POWER+45, +46
REX TV POWER+74
SABA TV POWER+57, +72, +73, +74, +75
SALORA TV POWER+74
SANYO TV POWER+41, +42, +43, +44, +48
SCHNEIDER TV POWER+06
SELECO TV POWER+74
SHARP TV POWER+36, +37, +38, +39, +48
SIEMENS TV POWER+71
SINGER TV POWER+57
SINUDYNE TV POWER+57
SONY TV POWER+35, +48
TELEAVA TV POWER+73
TELEFUNKEN TV POWER+67, +73, +75, +76
THOMSON TV POWER+72, +73, +75
THOMSON
ASIA
TV POWER+80, +81
TOSHIBA
TV POWER+47, +48, +49, +50, +51,
+52
WEGA TV POWER+57
YOKO TV POWER+06
ZENITH TV POWER+63
02063N-BD-D8200,D8500-XN-ENG-.in23 23 2011-03-04 오후 5:29:07
Page: 23
24 English
Connecting to a TV with an Audio/Video cables and RF cable
Connect the RF cable as shown.
Using video/audio cables, connect the VIDEO OUT (yellow) / AUDIO OUT (white and red)
terminals on the rear of the product to the VIDEO IN (yellow) / AUDIO IN (white and red) terminals
of your TV.
Plug in the product and TV.
Turn on the product and TV.
NOTE
The RF cable connection of this product sends only signals of TV. You must connect the Audio/Video cables to watch
output from your product.
Noise may be generated if the audio cable is placed too close to the power cable.
If you want to connect to an AV receiver, please refer to the AV receiver connection pages. (See pages 28~29)
The number and position of terminals may vary depending on your TV set. Please refer to the user manual of your TV.
If there is only one audio input terminal on the TV, connect it to the AUDIO OUT (right/white) terminal of the product.
1.
2.
3.
4.
✎
▪
▪
▪
▪
▪
Connections
To ANT IN
To TV
RF cable
To ANT INPUT
Audio/Video cable
White
Red Yellow
02063N-BD-D8200,D8500-XN-ENG-.in24 24 2011-03-04 오후 5:29:08
Page: 24
English 25
04
Connections
Connecting to a TV
Case 1 : Connecting to a TV with an HDMI Cable - Best Quality
(Recommended)
Using an HDMI cable, connect the HDMI OUT terminal on the rear of the product to the HDMI IN
terminal of your TV.
Turn on the product and TV.
Press the input selector on your TV remote control until the HDMI signal from the product appears
on your TV screen.
If you have set the remote control to operate your TV (See pages 22~23), press the TV SOURCE
button on the remote control and select HDMI as the external source of the TV.
NOTE
An HDMI cable outputs digital video/audio, so you don't need to connect an audio cable.
If the product is connected to your TV in the HDMI 720p, 1080i, or 1080p output mode, you must use a High speed
(category 2) HDMI cable.
HDMI outputs only a pure digital signal to the TV.
If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on the screen.
Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of your TV.
When you connect the product to the TV using the HDMI cable for the first time or to a new TV, the HDMI output
resolution will be automatically set to the highest supported by the TV.
You must have an HDMI connection to enjoy videos with 3D technology.
A long HDMI cable may cause a screen noise. If this occurs, set Deep Colour to Off in the menu.
If you use HDMI-to-DVI cable to connect to your display device, you must also connect the AV OUT or Digital Audio OUT
to your display device or an audio system to hear audio.
1.
2.
3.
•
✎
▪
▪
▪
▪
▪
▪
▪
▪
HDMI cable
(not included)
02063N-BD-D8200,D8500-XN-ENG-.in25 25 2011-03-04 오후 5:29:08
Page: 25
26 English
Connections
Case 2 : Connecting to a TV with a Component Cable - Better Quality
You can connect the product to your TV using Component video cables.
You will enjoy high quality images with accurate colour reproduction. Component video separates
the picture element into black and white (Y), blue (PB) and red (PR) signals to present clear and clean
images. (Audio signals are delivered through the audio output.)
Using a Component video cable, connect the COMPONENT OUT terminals on the rear of the
product to the COMPONENT IN terminals of your TV.
Using audio cables, connect the AUDIO OUT (white and red) terminals on the rear of the product
to the AUDIO IN (white and red) terminals of your TV.
Turn on the product and TV.
Press the input selector on your TV remote control until the “COMPONENT” signal from the product
appears on the TV screen.
If you have set the remote control to operate your TV (See pages 22~23), press the TV SOURCE
button on the remote control and select COMPONENT as the external source of the TV.
NOTE
Depending on the manufacturer, the component terminals on your TV may be marked “R-Y, B-Y, Y ” or “Cr, Cb, Y”
instead of “PB, PR, Y”. The number and position of terminals may vary depending on the TV set.
Please refer to the user manual of your TV.
You can select from a variety of resolution settings as 1080i, 720p, 576p/480p or 576i/480i, depending on the
contents type. (See pages 36~38)
The actual resolution may differ from the setting in the setup menu if you have connected both Component and HDMI
cables. The resolution may also be different depending on the contents type. (See pages 36~38)
-
-
1.
2.
3.
4.
•
✎
▪
▪
▪
White Red Blue Green
Red
Audio cable
Component cable
(not included)
02063N-BD-D8200,D8500-XN-ENG-.in26 26 2011-03-04 오후 5:29:09
Page: 26
English 27
04
Connections
Case 3 : Connecting to a TV with an Audio/Video cable - Good Quality
Using an Audio/Video cable, connect the VIDEO OUT (yellow) / AUDIO OUT (white and red)
terminals on the rear of the product to the VIDEO IN (yellow) / AUDIO IN (white and red) terminals
of your TV.
Turn on the product and TV.
Press the input selector on your TV remote control until the “VIDEO” signal from the product appears
on the TV screen.
If you have set the product's remote control to operate your TV (See pages 22~23), press the TV
SOURCE button on the remote control and select VIDEO as the external source of the TV.
NOTE
Noise may be generated if the audio cable is placed too close to the power cable.
If you want to connect to an AV receiver, please refer to the AV receiver connection pages. (See pages 28~29)
The number and position of input terminals may vary depending on your TV set. Please refer to the user manual of your
TV.
CAUTION
Do not connect the product to your TV through a VCR. Video signals fed through VCRs may be affected by copyright
protection systems and the picture will be distorted on the television.
1.
2.
3.
•
✎
▪
▪
▪
!
▪
White
Red Yellow
Audio/Video cable
02063N-BD-D8200,D8500-XN-ENG-.in27 27 2011-03-04 오후 5:29:09
Page: 27
28 English
Connections
Connecting to an Audio System
Please turn the volume down when you turn on the AV receiver. A sudden loud sound may cause
damage to the speakers and your ears.
Set the audio output format according to the capabilities of your AV receiver. (See pages 39~42)
The position of HDMI input terminals may vary depending on your AV receiver. Please refer to the
user manual of your AV receiver.
•
•
•
Case 1 : Connecting to an Audio System (HDMI supported AV receiver)
- Best Quality (Recommended)
Using an HDMI cable, connect the HDMI OUT terminal on the rear of the product to the HDMI IN
terminal of your AV receiver.
Using an HDMI cable, connect the HDMI OUT terminal of the AV receiver to the HDMI IN terminal of
your TV.
Turn on the product, TV, and AV receiver.
Press the input select button of the AV receiver and TV to select the external input to hear sound
from the player. Refer to your AV receiver’s user manual to set the AV receiver’s audio input.
1.
2.
3.
4.
HDMI cable
(not included)
HDMI cable
(not included)
02063N-BD-D8200,D8500-XN-ENG-.in28 28 2011-03-04 오후 5:29:10
Page: 28
English 29
04
Connections
Case 2 : Connecting to an Audio
System (Stereo Amplifier)
- Good Quality
Using the audio cables, connect the AUDIO
OUT (white and red) terminals on the rear of
the product to the AUDIO IN (white and red)
terminals of your Stereo Amplifier.
Using the video signal cable(s), connect
the HDMI, COMPONENT, or VIDEO OUT
terminals on the rear of the product to the
HDMI, COMPONENT, or VIDEO IN terminal
of your TV. (See pages 25~27)
Turn on the product, TV, and Stereo Amplifier.
Press the input select button of the Stereo
Amplifier to select the external input and hear
sound from the product. Refer to your
Stereo Amplifier's user manual to set the
Stereo Amplifier's audio input.
Press the input selector on your TV remote
control to select the video source (HDMI,
Component, or Video.)
1.
2.
3.
4.
5.
Case 3 : Connecting to an Audio
System (AV receiver with Dolby
Digital or DTS decoder) - Better
Quality
Using an optical cable, connect the DIGITAL
AUDIO OUT (OPTICAL) terminal on the rear
of the product to the DIGITAL AUDIO IN
(OPTICAL) terminal of your AV receiver.
Using the video signal cable(s), connect
the HDMI, COMPONENT, or VIDEO OUT
terminals on the rear of the product to the
HDMI, COMPONENT, or VIDEO IN terminal
of your TV. (See pages 25~27)
Turn on the product, TV, and AV receiver.
Press the input select button of the AV receiver
to select the external input in order to hear sound
from the product. Refer to your AV receiver’s
user manual to set the AV receiver’s audio input.
Press the input selector on your TV remote
control to select the video source (HDMI,
Component, or Video.)
1.
2.
3.
4.
5.
NOTE
If you use the Digital Audio connection described in Case 3, you will hear only front two speakers with Digital Output
setting as PCM.
✎
▪
White
Red
Case 2 : Audio cable Case 3 : Optical cable
(not included)
02063N-BD-D8200,D8500-XN-ENG-.in29 29 2011-03-04 오후 5:29:11
Page: 29
30 English
Connections
Connecting to the Network
This product lets you use network based services (See pages 73~82) such as Smart Hub and BD-LIVE,
and software upgrades when it is connected to a network. We recommend using an AP (Access Point)
or IP router for the connection. For more information on router connections, refer to the user manual of
the router or contact the router manufacturer for technical assistance.
Cable Network
Using the Direct LAN Cable (UTP cable), connect the LAN terminal of the product to the LAN
terminal of your modem or router.
To set the network options, see pages 44~48.
NOTE
Internet access to Samsung’s software update server may not be allowed, depending on the router you use or your
ISP’s policy. For more information, contact your ISP (Internet Service Provider).
For DSL users, please use a router to make a network connection.
To use the AllShare function, you must connect your PC to your network as shown in the figure.
The connection can be wired or wireless.
1.
2.
✎
▪
▪
▪
Broadband
service
Broadband modem
(with integrated router)
Router
Broadband modem
Broadband
service
Or
Networking with PC for
AllShare function
02063N-BD-D8200,D8500-XN-ENG-.in30 30 2011-03-04 오후 5:29:11
Page: 30
English 31
04
Connections
Wireless Network
Your product has built in Wi-Fi capability. You can connect to a network through a Wireless IP sharer
(a router or modem).
To set the network options, see pages 44~48.
NOTE
To use a wireless network, your product must be connected to a wireless IP sharer (router). If the wireless IP sharer
supports DHCP, your product can use a DHCP or static IP address to connect to the wireless network.
Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharer
is currently being used by another device nearby, this will result in interference and communication failure.
If Pure High-throughput (Greenfield) 802.11n mode is selected and the Encryption type is set to WEP, TKIP or TKIP-
AES (WPS2Mixed) for your AP, this product will not support a connection in compliance with new Wi-Fi certification
specifications.
If your AP supports WPS (Wi-Fi Protected Setup), you can connect to the network via PBC (Push Button Configuration)
or PIN (Personal Identification Number). WPS will automatically configure the SSID and WPA key in either mode.
You can setup a wireless network three ways:
Wireless (general)
Using WPS(PBC)
One Foot Connection
Wireless (general) includes both Automatic and Manual setup procedures.
Wireless LAN, by its nature, may cause interference, depending on the operating conditions (AP performance, distance,
obstacles, interference by other radio devices, etc).
Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not supported.
The product supports only the following wireless security key protocols :
WEP (OPEN/SHARED), WPA-PSK (TKIP/AES), WPA2-PSK (TKIP/AES).
To use the AllShare function, you must connect your PC to your network as shown in the figure.
The connection can be wired or wireless.
✎
▪
▪
▪
▪
▪
-
-
-
▪
▪
▪
-
▪
Wireless IP sharer
Broadband
service
Networking with PC for
AllShare function
02063N-BD-D8200,D8500-XN-ENG-.in31 31 2011-03-04 오후 5:29:12
Page: 31
32 English
Setup
Before Starting (Plug & Play)
Turn on your TV after connecting the product.
When you connect the product to a TV for the
first time, product turns on automatically and
the Plug & Play screen appears.
Press the ►▲▼ buttons to select the desired
language, and then press the ENTER button.
Press the ►▲▼ buttons to select the desired
country, and then press the ENTER button.
Enter the desired 4-digit password using the
number buttons. (France only)
Press the ►▲▼ buttons to select the desired
Clock Mode.
If you select Auto : Press the ENTER
button.
If you select Manual : Press the ▲▼◄►
button to set the clock, then press the
ENTER button.
Press the ▲▼ buttons to select the desired
Antenna Source, then press the ENTER
button.
1.
2.
3.
4.
5.
•
•
6.
If you select Air : Press the ▼ button to
select the Search, then press the ENTER
button.
If you select Cable : Press the ▼ button
to select the Next, then press the ENTER
button. Set the Search Mode option, then
press the ▼ button to select the Search
button.
Press the ►▲▼ buttons to select the desired
Channel Ordering, and then press the ENTER
button. (Italy only)
Press the ◄► buttons to the select the
Network Settings or Watch TV, then press
the ENTER button.
(For more information about Network settings,
please refer to pages 44~48)
NOTE
When the product is connected to the TV for the
first time, the product turns on automatically. This is
normal operation.
Password
France only : Enter the desired 4-digit password
using the number buttons.
* 
You can not set the password to “0000”.
Please choose other numbers.
Other : Enter the desired 4-digit password using
the number buttons.
* Default password is set to 0000.
Channel Ordering menu can be displayed when the
country set to Italy.
Accessing the Settings Menu
Press the MENU button.
The home menu will be displayed.
Press the ◄► buttons to select the desired
home menu, and then press the ENTER button.
Press the ▲▼ buttons to select the desired
submenu, and then press the ENTER button.
Press the ▲▼ buttons to select the desired
item, and then press the ENTER button.
Press the EXIT button to exit the menu.
•
•
7.
8.
✎
▪
▪
-
-
▪
1.
2.
3.
4.
5.
Plug & Play
" Enter
Menu Language	 : English
Select the OSD Language.
►
Plug & Play
a Previous d Skip > Move " Enter
Air
Cable
Search
Set Auto Tuning search options.
02063N-BD-D8200,D8500-XN-ENG-.in32 32 2011-03-04 오후 5:29:13
Page: 32
English 33
05
Setup
Home Menu
1 Selects My Devices.
2 Selects My Contents.
3 Selects Watch TV.
4 Selects Internet.
5 Selects Settings.
6 Displays the buttons available.
NOTE
When the product is connected to a network, select
Smart Hub from the Home menu.
Download the desired content from Samsung Apps.
(See pages 80~81)
The access steps may differ depending on the menu
you selected.
The OSD (On Screen Display) may change in this
product after you upgrade the software version.
If the product is left in the home menu more than 3
minutes without being used, DTV screen will appear.
If the product is left in the other menu including
settings more than 5 minutes without being used, a
screen saver will appear on your TV.
Watch TV
Press the MENU button.
The home menu will be displayed.
Press the ◄► buttons to select the Watch
TV.
Press the ▲▼ buttons to select the desired
submenu, then press the ENTER button.
•
✎
▪
▪
▪
▪
▪
1.
2.
3.
Press the ▲▼ buttons to select the desired
item, then press the ENTER button.
Press the EXIT button to exit the menu.
Channel List
You can see all channels searched.
Press the CH LIST button on the remote
control.
The Channel List will be displayed.
Channel List Screen
1 Shows the stored channels.
2
Navigation Help : Displays remote control buttons
available.
RED (A) : Selects Air or Cable.
YELLOW (C) : Displays the Programme
information.
Ch. Mode : Shows the channel mode according
to channel type. (All, TV, Radio, Data/Other)
Watch : Displays the selected channel.
Page : Moves to next or previous page.
•
•
•
•
•
Press the ▲▼ buttons to select desired
channel, press the ENTER button.
The selected channel will be displayed.
NOTE
By pressing the INFO button, you can watch or
record the selected channel.
4.
5.
1.
2.
✎
▪
d WPS(PBC)
My Devices Internet Settings
Guide
Schedule Manager
Channel List
Channel Manager
My Contents
Watch TV
5
6
1
4
3
2
808
809
810
811
812
813
814
BBC World
bid-up.tv
Boomerang
Cartoon Nwk
Class News
Coming Soon
Discovery
No Information
All
Channel List
a Antenna c Programme View < Ch. Mode " Watch ƒ Page
Air 2
1
02063N-BD-D8200,D8500-XN-ENG-.in33 33 2011-03-04 오후 5:29:14
Page: 33
34 English
Setup
Channel Manager
You can manage the stored channels.
Channel Manager Screen
1
Edited Channels : Press the ◄▲▼ buttons to
check edited channels.
Channels ( ) : Shows the channel list
according to channel type. (All, TV, Radio,
Data/Other)
Favourites ( ) : Shows all favourite channel.
(Favourites 1, Favourites 2, Favourites 3......)
•
•
2 Shows the stored channels.
3
Navigation Help : Displays remote control buttons
available.
RED (A) : Selects Air or Cable.
BLUE (D) : Sorts the list ordered by channel
number or channel name.
Page : Moves to next or previous page.
Select : Selects desired Channel.
Tools : Displays the Channel Manager option.
Return : Returns to previous menu.
•
•
•
•
•
•
Channel Status Display Icons
Icons Operations
c A channel selected.
A channel set as Favourites.
\ A locked channel.
Using the TOOLS button
Press the ▲▼ buttons to select the desired
channel, then press the TOOLS button.
Watch
Select this to watch the channel.
Add to Favourites / Edit Favourites
Select this to add the desired favourite channel.
Lock / Unlock
Select this to lock the channel.
Edit Channel Number
Select this to edit the channel number.
If the Edit Channel Number option is not displayed
in the Channel Manager, set it to Enable in the
channels menu. (See page 43).
This menu will be displayed only when you set the
antenna source type and country as below.
Antenna source Country
Air Netherlands, Italy
Delete
Select this to delete the Channel.
Deselect All
Select this to deselect all channel.
Select All
Select this to select all channel.
NOTE
For satellite broadcasting, editing the channel
numbers may be possible depending on the
specification.
✎
▪
801
803
805
807
809
811
813
815
xxxxxxxx
xxxxxxxx
xxxxxxxx
xxxxxxxx
xxxxxxxx
xxxxxxxx
xxxxxxxx
xxxxxxxx
1/2 Pages
Channel Manager | All
a Antenna d Sorting ƒ Page " Select / Tools ' Return
Selected item: 1 Channel number
Air
801 xxxxxxxx
803 xxxxxxxx
805 xxxxxxxx
807 xxxxxxxx
809 xxxxxxxx
811 xxxxxxxx
813 xxxxxxxx
815 xxxxxxxx
801 xxxxxxxx
803 xxxxxxxx
805 xxxxxxxx
807 xxxxxxxx
809 xxxxxxxx
811 xxxxxxxx
813 xxxxxxxx
814 xxxxxxxx
Tools
" Enter ' Return
Watch
Add to Favourites
Lock
Edit Channel Number
Delete
Deselect All
Select All

1/2 Pages
Channel Manager | All
a Antenna d Sorting ƒ Page " Select / Tools ' Return
Channel number
Air 3
1 2
801 xxxxxxxx
803 xxxxxxxx
805 xxxxxxxx
807 xxxxxxxx
809 xxxxxxxx
811 xxxxxxxx
813 xxxxxxxx
815 xxxxxxxx
800 xxxxxxxx
802 xxxxxxxx
804 xxxxxxxx
806 xxxxxxxx
808 xxxxxxxx
810 xxxxxxxx
812 xxxxxxxx
814 xxxxxxxx
02063N-BD-D8200,D8500-XN-ENG-.in34 34 2011-03-04 오후 5:29:15
Page: 34
English 35
05
Setup
Settings
Press the MENU button.
The home menu will be displayed.
Press the ◄► buttons to select the Settings,
then press the ENTER button.
Press the ▲▼ buttons to select the desired
submenu, then press the ENTER button.
Press the ▲▼ buttons to select the desired
item, then press the ENTER button.
Press the EXIT button to exit the menu.
Display
You can configure various display options such as
the TV Aspect Ratio, Resolution, etc.
3D Settings
Select whether to play a Blu-ray Disc with 3D
contents in 3D Mode.
3D Blu-ray Playback Mode
3D Blu-ray Discs are available in two formats :
Blu-ray 3D and 3D only. You can choose to watch
a Blu-ray 3D disc in 3D or 2D mode before playing
the disc.
Auto : Automatically detect if a connected TV
has 3D capability and play a Blu-ray 3D disc in
3D or 2D accordingly or a 3D only disc in 3D if
the TV supports 3D.
3D only discs will not be played if your TV does
not support 3D.
3D  3D : Play 3D only and Blu-ray 3D discs in
3D mode at all times.
3D  2D : Play Blu-ray 3D discs in 2D mode at
all times. 3D only discs will not be played.
1.
2.
3.
4.
5.
•
•
•
NOTE
Depending on the content and the position of the
picture on your TV screen, you may see vertical
black bars on the left side, right side, or both sides.
Screen Size
Lets you enter the actual screen size of your TV so
that the product can adjust the image according
to the screen size and display an optimal 3D
image.
(For 3D displays bigger than 116 inches, simply
setting it as 116 is a safe choice.)
CAUTION
If you want to enjoy 3D content, connect a 3D device
(3D compliant AV receiver or TV) to the product’s
HDMI OUT port using a high-speed HDMI cable. Put
on 3D glasses before playing the 3D content.
The product outputs 3D signals only through HDMI
cable connected to the HDMI OUT port.
As the video resolution in 3D play mode is fixed
according to the resolution of the original 3D
video, you can not change the resolution to your
preference.
Some functions such as BD Wise, screen size
adjustment, and resolution adjustment may not
operate properly in 3D play mode.
You must use a high-speed HDMI cable for proper
output of the 3D signal.
Stay at least three times the width of the screen from
the TV when watching 3D images. For example, if
you have a 46 inch screen, stay 138 inches (11.5
feet) from the screen.
Place the 3D video screen at eye level for the
best 3D picture.
When the product is connected to some 3D devices,
the 3D effect may not function properly.
“Blu-ray 3D” and “Blu-ray 3D” logo are trademarks
of the Blu-ray Disc Association.
✎
▪
!
▪
▪
▪
▪
▪
▪
-
▪
▪
Settings
Display
Audio
Channel
Network
System
Language
Security
General
Support
3D Settings
HDMI Deep Color	 : Auto
3D Settings
> Move " Enter ' Return
3D Blu-ray Playback Mode	 : Auto
Screen Size	 : 55 inch
02063N-BD-D8200,D8500-XN-ENG-.in35 35 2011-03-04 오후 5:29:16
Page: 35
36 English
Setup
TV Aspect
Depending on the type of television you have, you
may want to adjust the screen size setting.
16:9 Original : Select when you connect the
product to a 16:9 TV screen. The product will
display all content in its original aspect ratio.
Content formatted in 4:3 will be displayed with
black bars on the left and right.
16:9 Full : Select when you connect the
product to a 16:9 TV screen. All content will fill
the full screen. Content formatted in 4:3 will be
stretched.
4:3 Letter Box : Select when you connect the
product to a 4:3 TV screen. The product will
display all content in its original aspect ratio.
Content formatted in 16:9 will be displayed with
black bars on the top and bottom.
4:3 Pan-Scan : Select when you connect the
product to a 4:3 TV screen. 16:9 content will
have the extreme left and right portions cut off.
NOTE
Depending on the disc type, some aspect ratios may
not be available.
If you select an aspect ratio and option which is
different than the aspect ratio of your TV screen,
then the picture might appear to be distorted.
If you select the 16:9 Original, your TV may display
4:3 Pillarbox (black bars on sides of picture).
Smart Hub Screen Size
Set the Smart Hub Screen to the optimal size.
Size 1 : Smart Hub screen size will be smaller
than default. You may see some black on sides
of screen.
Size 2 : This is the default setting for Smart
Hub. The product displays the normal Smart
Hub screen size.
Size 3 : This will display a larger Smart Hub
screen size. The image may be too large for
your TV screen.
BD Wise (Samsung Products only)
BD Wise is Samsung’s latest inter-connectivity
feature.
•
•
•
•
✎
▪
▪
▪
•
•
•
When you connect a Samsung product and a
Samsung TV with BD Wise to each other via HDMI,
and BD Wise is on in both the product and TV, the
product outputs video at the video resolution and
frame rate of the Blu-ray Disc/DVDs.
Off : The output resolution stays fixed at the
resolution you set previously in the Resolution
menu, regardless of the resolution of the disc.
See Resolution below.
On : The product outputs video at the original
resolution and frame rate of the Blu-ray Disc/
DVDs.
NOTE
When BD Wise is on, the Resolution setting
automatically defaults to BD Wise and BD Wise
appears in the Resolution menu.
If the product is connected to a device that does
not support BD Wise, you can not use the BD Wise
function.
For proper operation of BD Wise, set the BD Wise
menu of both the product and the TV to On.
Resolution
Lets you set the output resolution of the
Component and HDMI video signal to Auto,
1080p, 1080i, 720p, 576p/480p, or 576i/480i.
The number indicates the number of lines of video
per frame. The i and p indicate interlaced and
progressive scan, respectively. The more lines, the
higher the quality.
Auto : Automatically sets the output resolution
to the connected TV’s maximum resolution.
BD Wise : Automatically sets the resolution to
the resolution of the Blu-ray Disc/DVDs if you
have connected the product via HDMI to a TV
with the BD Wise feature. (The BD Wise menu
item appears only if BD Wise is set to On. See
BD Wise above.)
1080p : Outputs 1080 lines of progressive
video.
1080i : Outputs 1080 lines of interlaced video.
720p : Outputs 720 lines of progressive video.
576p/480p : Outputs 576/480 lines of
progressive video.
576i/480i : Outputs 576/480 lines of interlaced
video.
•
•
✎
▪
▪
▪
•
•
•
•
•
•
•
02063N-BD-D8200,D8500-XN-ENG-.in36 36 2011-03-04 오후 5:29:16
Page: 37
38 English
Setup
DTV View
Output
Resolution
HDMI connected HDMI not connected
HDMI Mode
Component/
VIDEO MODE
Component Mode VIDEO Mode
BD Wise 1080p 576i/480i - -
Auto
DTV Smart Resolution
“Auto”
Resolution of
Broadcast stream
576i/480i - -
DTV Smart Resolution
“Off”
Max Resolution of
TV input
1080p 1080p 576i/480i - -
1080i 1080i 576i/480i 576p/480p 576i/480i
720p 720p 576i/480i 576p/480p 576i/480i
576p/480p 576p/480p 576i/480i 576p/480p 576i/480i
576i/480i - - 576i/480i 576i/480i

NOTE
DTV smart resolution is activated only when
resolution option is set to Auto.
If the TV you connected to the product does not
support Movie Frame or the resolution you selected,
the message “If no pictures are shown after
selecting ‘Yes’, please wait for 15 seconds to return
to the previous resolution. Do you want to change
the resolution?” appears.
If you select Yes, the TV’s screen will go blank for
15 seconds, and then the resolution will revert to the
previous resolution automatically.
If the screen stays blank after you have changed the
resolution, remove all discs, and then press and hold
the STOP ( ) button on the front of the product for
more than 5 seconds. All settings are restored to the
factory default. Follow the steps on the previous page
to access each mode and select the Display Setup
that your TV will support.
When the factory default settings are restored, all
stored user BD data is deleted.
The Blu-ray Disc must have the 24 frame feature for
the product to use the Movie Frame (24Fs) mode.
If both HDMI and Component jacks are connected
and you are currently viewing Component output,
the resolution is fixed to 576i/480i.
✎
▪
▪
▪
▪
▪
▪
For Copy protected DivX content, the ouput resolution
of component Video is forced to 576i/480i.
DTV Smart Resolution
Use this function to automatically optimised
screen resolution for digital broadcasts.
Auto : Screen resolution is automatically
optimised for digital broadcast.
Off : Turn off DTV Smart Resolution.
NOTE
When you change your TV channel with this function
set to Auto, according your TV, the display time of
next channels may take longer than the function set
to Off.
HDMI Colour Format
Lets you set the colour space format for HDMI
output to match the capabilities of the connected
device (TV, monitor, etc).
Auto : Automatically sets the product to the
optimum format supported by your device.
YCbCr (4:4:4) : If your TV supports the YCbCr
colour space via HDMI, select this to output the
normal YCbCr colour gamut.
RGB (Standard) : Select this to output the
normal RGB colour gamut.
▪
•
•
✎
▪
•
•
•
02063N-BD-D8200,D8500-XN-ENG-.in38 38 2011-03-04 오후 5:29:16
Page: 38
English 39
05
Setup
RGB (Enhanced) : If you have connected
the product to a DVI display device such as
a monitor, select this to output the enhanced
RGB colour gamut.
Movie Frame (24Fs)
Setting the Movie Frame (24Fs) feature to Auto
allows you to adjust the product’s HDMI output to
24 frames per second for improved picture quality.
You can enjoy the Movie Frame (24Fs) feature only
on a TV supporting this frame rate. You can select
Movie Frame only when the product is in the
HDMI 1080i or 1080p output resolution modes.
Auto : Movie Frame (24Fs) functions work.
Off : Movie Frame (24Fs) functions are off.
HDMI Deep Color
Lets you output video from the HDMI OUT jack
with Deep Colour. Deep Colour provides more
accurate colour reproduction with greater colour
depth.
Auto : The product outputs video with Deep
Colour to a connected TV which supports HDMI
Deep Colour.
Off : The picture is output without Deep Colour.
Still Mode
Lets you set the type of picture the product
displays when you pause DVD playback.
Auto : Automatically shows the best still picture
depending on the content.
Frame : Select when pausing a scene with a
little action.
Field : Select when pausing a scene with a lot
of action.
Progressive Mode
Lets you improve picture quality when viewing
DVDs.
Auto : Select to have the product automatically
select the best picture quality for the DVD you’re
watching.
Video : Select for the best picture quality from
concert or TV show DVDs.
•
•
•
•
•
•
•
•
•
•
Audio
Digital Output
You set the Digital Output to match the
capabilities of the AV receiver you’ve connected to
the product :
PCM : Choose if you have connected an HDMI
supported AV receiver.
Bitstream (Unprocessed) : Select if you have
connected an HDMI supported AV receiver
with Dolby TrueHD and DTS-HD Master Audio
decoding capabilities.
Bitstream (Re-encoded DTS) : Choose if you
have connected an AV receiver using a Digital
Optical input that can decode DTS.
Bitstream (Re-encoded Dolby D) : Select if
you don’t have an HDMI supported AV receiver,
but have an AV receiver with Dolby Digital
decoding capabilities.
Blu-ray Discs may include three audio streams :
Main Feature Audio : The audio soundtrack of
the main feature.
BONUSVIEW audio : An additional soundtrack
such as the director or actor’s commentary.
Navigation Sound Effects : When you choose
some menu navigation, Navigation Sound
Effects may sound. Navigation Sound Effects
are different on each Blu-ray Disc.
NOTE
Be sure to select the correct Digital Output or you
will hear no sound or a loud noise.
If the HDMI device (AV receiver, TV) is not compatible
with compressed formats (Dolby digital, DTS), the
audio signal outputs as PCM.
Regular DVDs do not have BONUSVIEW audio and
Navigation Sound Effects.
Some Blu-ray Discs do not have BONUSVIEW audio
and Navigation Sound Effects.
This Digital Output setup does not effect the analogue
(L/R) audio or HDMI audio output to your TV.
It effects the optical and HDMI audio output when
connected to an AV receiver.
•
•
•
•
-
-
-
✎
▪
▪
▪
▪
▪
02063N-BD-D8200,D8500-XN-ENG-.in39 39 2011-03-04 오후 5:29:16
Page: 39
40 English
Setup
Digital Output Selection
Setup PCM
Bitstream
(Unprocessed)
Bitstream
(Re-encoded
DTS)
Bitstream
(Re-encoded
Dolby D)
Connection
HDMI
supported
AV receiver
Optical
HDMI
supported
AV receiver
Optical
HDMI supported
AV receiver or
Optical
HDMI supported
AV receiver or
Optical
Audio Stream
on Blu-ray
Disc
PCM Up to 7.1ch PCM 2ch PCM PCM 2ch Re-encoded DTS
Re-encoded
Dolby Digital *
Dolby Digital Up to 7.1ch PCM 2ch Dolby Digital Dolby Digital Re-encoded DTS
Re-encoded
Dolby Digital *
Dolby Digital
Plus
Up to 7.1ch PCM 2ch
Dolby Digital
Plus
Dolby Digital Re-encoded DTS
Re-encoded
Dolby Digital *
Dolby TrueHD Up to 7.1ch PCM 2ch Dolby TrueHD Dolby Digital Re-encoded DTS
Re-encoded
Dolby Digital *
DTS Up to 6.1ch PCM 2ch DTS DTS Re-encoded DTS
Re-encoded
Dolby Digital *
DTS-HD High
Resolution
Audio
Up to 7.1ch PCM 2ch
DTS-HD High
Resolution
Audio
DTS Re-encoded DTS
Re-encoded
Dolby Digital *
DTS-HD
Master Audio
Up to 7.1ch PCM 2ch
DTS-HD
Master Audio
DTS Re-encoded DTS
Re-encoded
Dolby Digital *
Audio Stream
on DVD
PCM PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch
Dolby Digital Up to 5.1ch PCM 2ch Dolby Digital Dolby Digital Dolby Digital Dolby Digital
DTS Up to 6.1ch PCM 2ch DTS DTS DTS DTS
Audio Stream
of Broadcast
Dolby Digital Up to 5.1ch PCM 2ch Dolby Digital Dolby Digital Re-encoded DTS
Re-encoded
Dolby Digital *
Dolby Digital
Plus
Up to 5.1ch PCM 2ch
Dolby Digital
Plus***
Dolby Digital Re-encoded DTS
Re-encoded
Dolby Digital *
MPEG1 Up to 5.1ch PCM 2ch
PCM
(up to 5.1ch)
PCM 2ch Re-encoded DTS
Re-encoded
Dolby Digital *
HE-AAC Up to 5.1ch PCM 2ch
Re-encoded
Dolby Digital**
(for Multichannel
Programme)
Re-encoded
Dolby Digital**
(for Multichannel
Programme)
Re-encoded DTS
Re-encoded
Dolby Digital *
02063N-BD-D8200,D8500-XN-ENG-.in40 40 2011-03-04 오후 5:29:16
Page: 40
English 41
05
Setup
PCM Downsampling
Lets you set 48kHz and 96kHz PCM down-
sampling on or off.
Off : Select when the AV receiver connected to
the product is 96kHz compatible.
On : Select when the AV receiver connected
to the product is not 96kHz compatible. 96kHz
signals will be down converted to 48kHz.
NOTE
Even when PCM Downsampling is set to Off, some
discs will only output downsampled audio through
the optical digital outputs.
HDMI
If your TV is not compatible with compressed
multi-channel formats (Dolby Digital, DTS), the
product may output PCM 2ch downmixed
audio even though you set the digital output as
Bitstream (unprocessed/Re-encoded DTS/Re-
encoded Dolby D) on your setup menu.
If your TV is not compatible with PCM sampling
rates over 48kHz, the product may output
48kHz downsampled PCM audio even though
you set PCM Downsampling to Off.
•
•
✎
▪
•
•
Dynamic Range Control
You can listen at low volumes, but still hear dialog
clearly.
This is only active if your product detects a Dolby
Digital, Dolby Digital Plus or Dolby TrueHD signal.
Auto : The Dynamic Range Control will be set
automatically based on the information provided
by the Dolby TrueHD Soundtrack.
Off : You can enjoy the movie with the standard
Dynamic Range.
On : When Movie soundtracks are played at low
volume or through smaller speakers, the system
can apply appropriate compression to make
low-level content more intelligible and prevent
dramatic passages from getting too loud.
Downmixing Mode
Lets you select how the product will downmix
multi-channel audio into fewer channels.
Normal Stereo : Downmixes the multi-channel
audio into two channel stereo. Choose when
connected to equipment that does not support
virtual surround functions such as Dolby Pro
Logic.
Surround Compatible : Downmixes multi-
channel audio into surround compatible stereo.
Choose when connected to equipment that
supports virtual surround functions such as
Dolby Pro Logic.
•
•
•
•
•
Definition for
Blu-ray Disc
Any
Decodes the main feature
audio and BONUSVIEW
audio stream together
into PCM audio and adds
Navigation Sound Effects.
Outputs only the main
feature audio stream so that
your AV receiver can decode
the audio bitstream.
You will not hear
BONUSVIEW audio or
Navigation Sound Effects.
Decodes the main
feature audio and
BONUSVIEW audio
stream together
into PCM audio and
adds Navigation
Sound Effects, then
re-encodes the
PCM audio into DTS
bitstream.
Decodes the main
feature audio and
BONUSVIEW audio
stream together
into PCM audio and
adds Navigation
Sound Effects,
then re-encodes
the PCM audio
into Dolby digital
bitstream.
* If the Source Stream is 2ch, “Re-encoded Dolby D” Setting are not applied. Output will be PCM 2ch.
** 
If HE-AAC Source Stream is 2ch or 1ch, Output shall be 2ch PCM.
For Dolby Digital Plus stream on Internet Content, PCM Output via HDMI supported up to 5.1ch.
*** 
If the Audio Description is set to On and the Number of Audio Channel is more than 2, audio output
will be changed Dolby Digital even if the original broadcast stream is Dolby Digital Plus.
But, if the Number of Audio Channel is 2 (stereo) or 1 and Audio Description is set to On, Output
format will be PCM.
02063N-BD-D8200,D8500-XN-ENG-.in41 41 2011-03-04 오후 5:29:16
Page: 41
42 English
Setup
DTS Neo:6 Mode
You can enjoy multi-channel sound from an Audio
CD (CD-DA).
Off : Outputs a 2-channel audio signal through
the front speakers only.
Cinema : Select to play 2-channel movie sound
over multi-channels.
Music : Select to play 2-channel music over
multi-channels.
NOTE
If you are using an HDMI supported AV receiver, this
option is available when you set Digital Output setup
as PCM.
Audio Sync
In some cases when the product is connected to
a digital TV, the audio signal may not synchronize
with the video signal. If this occurs, adjust the
audio delay time to match the video signal.
You can set the audio delay time between 0
msec and 200 msec.
Adjust it to the optimal setting.
NOTE
The audio delay time you specify may not be exact
depending on the played content.
Channel
You can configure your TV channels with features
such as country and auto tune.
Antenna
Selects an appropriate type of antenna for digital
broadcasts.
Before your product can begin memorizing the
available channels, you must specify the type
of signal source that is connected to the this
product.
Air : Select Air for receiving digital broadcasts.
Cable : Select Cable for receiving digital
broadcasts.
•
•
•
✎
▪
•
✎
▪
•
•
Country
Select this to change the country.
Enter the desired 4-digit password using the
number buttons.
Press the ►▲▼ buttons to select the desired
country, then press the ENTER button.
Press the RETURN button.
NOTE
Password
France only : Enter the desired 4-digit password
using the number buttons.
Other : Enter the desired 4-digit password using
the number buttons.
* Default password is set to 0000.
Auto Tuning
Scans for all channels with active broadcast
stations and stores them.
Scans for a channel automatically and stores in
the product.
Automatically allocated programme numbers may
not correspond to actual or desired programme
numbers.
If a channel is locked using the Child Lock
function, the PIN input window appears.
Air : Press the ▼ button to select the Search,
then press the ENTER button.
Cable : Press the ▼ button to select the Next,
then press the ENTER button.
Set the Search Mode option, then press the ▼
button to select the Search button.
Search Mode (Full / Network / Quick) : Scans
for all channels with active broadcast stations
and stores them in the product.
1.
2.
✎
▪
-
-
•
•
-
02063N-BD-D8200,D8500-XN-ENG-.in42 42 2011-03-04 오후 5:29:16
Page: 42
English 43
05
Setup
NOTE
If you select Quick, you can set up the Network,
Network ID, Frequency, Modulation and Symbol
Rate manually by pressing the button on the remote
control.
Network (Auto / Manual) : Selects the Network ID
setting mode either Auto or Manual.
Network ID : When Network is Manual, you can
set up Network ID using the numeric buttons.
Frequency : Displays the frequency for the
channel. (differs in each country)
Modulation : Displays available modulation
values.
Symbol Rate : Displays available symbol rates.
Manual Tuning
Scans for a channel manually and stores in the
product.
When scanning has finished, channels are
updated in the channel list.
NOTE
When selecting Antenna  Air : Channel,
Frequency, Bandwidth.
When selecting Antenna  Cable : Frequency,
Modulation, Symbol Rate
Cable Search Option
Sets additional search options such as the
frequency and symbol rate for a cable network
search.
Start Frequency/Stop Frequency : Set the start
or stop frequency (differs in each country).
Symbol Rate : Displays available symbol rates.
Modulation : Displays available modulation
values.
Standby Auto Store
You can turn standby auto store function on or off.
Off : Turns standby auto store function off.
On : Turns standby auto store function on.
NOTE
This menu can be displayed when the country set to
Italy.
✎
▪
-
-
-
-
-
-
✎
▪
-
-
-
•
•
✎
▪
Transfer Channel List
This function can import or export the channel
map. You should connect a USB storage to use
this function. Enter your 4 digit PIN number when
the PIN input screen appears.
Import from USB : Import channel list from USB.
Export to USB : Export channel list to USB.
This function is available when USB is
connected.
Edit Channel Number
Select this to edit the channel number in the
channel manager. (See page 34)
Disable : Select disable if you do not want to
edit channel number.
Enable : Select enable if you want to edit
channel number.
This menu will be displayed only when you set the
antenna source type and country as below.
Antenna source Country
Air Netherlands, Italy
Common Interface
Show the CI Menu Information screen.
CI Menu : This enables the user to select from
the CAM provided menu. Select the CI Menu
based on the menu PC Card.
Application Info. : View information on the
CAM(Conditional Access Module) inserted into
the CI slot and on the “CI CAM with CI or CI+
CARD” which is inserted into the CAM. You can
install the CAM anytime whether the product is
on or off.
Purchase a CI CAM at your nearest dealer or
by phone.
Firmly insert the “CI CAM with CI or CI+ CARD”
into the CAM in the direction of the arrow.
•
•
•
•
•
•
1.
2.
02063N-BD-D8200,D8500-XN-ENG-.in43 43 2011-03-04 오후 5:29:16
Page: 43
44 English
Setup
Wired Network
Setting Up a Wired Connection - Auto
Press the ▲▼ buttons to select Wired.
Press the ENTER button.
The Network Status screen appears. The
product connects to the network after the
network connection is verified.
Setting Up a Wired Connection - Manual
If you have a static IP address or the Auto Setting
does not work, you’ll need to set the Network
Settings values manually.
To view your Network Settings values on most
Windows computers, follow these steps:
Windows XP
Right click the Network icon on the bottom
right of the Windows desktop.
In the pop-up menu, click Status.
On the dialog that appears, click the Support
tab.
On the Support tab, click the Details button.
The Network settings are displayed.
Windows 7
Click the Network icon on the bottom right of
the Windows desktop.
In the pop-up menu, click Network and
Sharing Centre.
On the dialog that appears, click the Local
Area Connection or Wireless Network
Connection depending on your network
connection.
On the Support tab, click the Details button.
The Network settings are displayed.

1.
2.

1.
2.
3.
4.
1.
2.
3.
4.
Insert the CAM with the “CI CAM with CI or
CI+ CARD” into the common interface slot,
in the direction of the arrow so that it aligns
parallel with the slot.
Check if you can see a picture on a scrambled
signal channel.
NOTE
This Device is work with CI and CI+ CAM.
But in case of some local DVB-T association, this
device doesn't have perfect compatibility with all
kinds of CAM.
If there is a problem, pull the CAM CARD out of the
Set and insert it into the slot again.
Network
Before you begin, contact your ISP to find out
if your IP address is static or dynamic. If it is
dynamic, and you are using a wired or wireless
connection, we recommend using the Auto
procedures. If you are using a wireless connection
and your router has the capability, you can use
WPS(PBC) or One Foot Connection.
If your IP address is static, you must use the
manual set up procedure for both wired and
wireless connections.
Network Settings
To begin setting up the network connection for
your product, follow these steps:
In the Home menu, press the ◄► buttons to
select Settings, and then press the ENTER
button.
Press the ▲▼ buttons to select Network, and
then press the ENTER button.
Press the ▲▼ buttons to select Network
Settings, and then press the ENTER button.
Press the ▲▼ buttons to select Wired,
Wireless (general), WPS(PBC) or One Foot
Connection, and then press the ENTER
button.
If you have a wired network, go to Wired
Network below. If you have a wireless
network, go to Wireless Network on pages
45~48.
3.
4.
✎
▪
1.
2.
3.
4.
5.
Settings
Display
Audio
Channel
Network
System
Language
Security
General
Support
Network Settings
> Move " Enter ' Return
Select a network connection type.
Wired
Wireless
(general)
WPS(PBC)
One Foot
Connection
Connect to the network using a LAN cable. Please make
sure that the LAN cable is connected.
02063N-BD-D8200,D8500-XN-ENG-.in44 44 2011-03-04 오후 5:29:17
Page: 44
English 45
05
Setup
NOTE
Depending on your Windows version, the information
may differ.
To enter the Network settings into your product,
follow these steps:
Press the ▲▼ buttons to select Wired, and
then press the ENTER button.
Press the ◄► buttons to select IP Settings,
and then press the ENTER button.
On the Network Status screen, select Cancel,
and then press Enter.
Press the ENTER button to select IP Mode.
Press the ▲▼ buttons to select Manual, and
then press the ENTER button.
Press the ▼ button to go to the first entry field
(IP Address).
Use the number buttons on your remote to
enter numbers.
When done with each field, press the ►
button to move successively to the next field.
You can also use the other arrow buttons to
move up, down, and back.
Enter the IP Address, Subnet Mask, and
Gateway values.
Press the ▼ button to go to DNS Mode.
Press the ▼ button to go to the first DNS
entry field. Enter the numbers as above.
Press the ENTER button to select OK.
The Network Status screen appears. The
product connects to the network after the
network connection is verified.
✎
▪
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
Wireless Network
You can setup a wireless network three ways:
Wireless (general)
Using WPS(PBC)
One Foot Connection
Wireless (general) includes both Automatic and
Manual setup procedures.
Setting Up the Wireless Network Connection
- Auto
Most wireless networks have an optional security
system that requires devices that access the
network to transmit an encrypted security code
called an Access or Security Key. The Security
Key is based on a Pass Phrase, typically a word
or a series of letters and numbers of a specified
length you were asked to enter when you set up
security for your wireless network. If you use this
method of setting up the network connection, and
have a Security Key for your wireless network, you
will have to enter the Pass Phrase during the Auto
setup process.
Press the ▲▼ buttons to select Wireless
(general).
Press the ENTER button.
When done, it displays a list of the available
networks.
Press the ▲▼ buttons to select the desired
network, and then press the ENTER button.
The Security screen appears.
•
•
•

1.
2.
3.
Settings
Display
Audio
Channel
Network
System
Language
Security
General
Support
IP Settings
> Move " Enter ' Return
IP Mode	 Manual
IP Address	 0 . 0 . 0 . 0
Subnet Mask	 0 . 0 . 0 . 0
Gateway	 0 . 0 . 0 . 0
DNS Mode	 Manual
DNS Server	 0 . 0 . 0 . 0
OK
Settings
Display
Audio
Channel
Network
System
Language
Security
General
Support
Network Settings
> Move " Enter ' Return
Wireless
(general)
One Foot
Connection
WPS(PBC)
Wired
Select a network connection type.
Set up a wireless network by selecting your wireless
router. You may need to enter a security key
depending on the settings of the wireless router.
02063N-BD-D8200,D8500-XN-ENG-.in45 45 2011-03-04 오후 5:29:17
Page: 45
46 English
Setup
On the Security screen, enter your network’s
Pass Phrase. Enter numbers directly using your
remote control.
To select a letter, press the ▲▼◄► buttons to
move the cursor, then press the ENTER button.
NOTE
You should be able to find the Pass Phrase on one of
the set up screens you used to set up your router or
modem.
When done, press the GREEN (B) button on
your remote, or press the ▲▼◄► buttons to
move the cursor to Done, and then press the
ENTER button.
The Network Status screen appears. The
product connects to the network after the
network connection is verified.
Setting Up the Wireless Network Connection
- Manual
If the Auto Setting does not work, you need to
enter the Network setting values manually.
To view your Network Settings values on most
Windows computers, follow these steps:
Windows XP
Right click the Network icon on the bottom
right of the Windows desktop.
In the pop-up menu, click Status.
On the dialog that appears, click the Support
tab.
On the Support tab, click the Details button.
The Network settings are displayed.
4.
✎
▪
5.

1.
2.
3.
4.
Windows 7
Click the Network icon on the bottom right of
the Windows desktop.
In the pop-up menu, click Network and
Sharing Centre.
On the dialog that appears, click the Local
Area Connection or Wireless Network
Connection depending on your network
connection.
On the Support tab, click the Details button.
The Network settings are displayed.
NOTE
Depending on your Windows version, the information
may differ.
To enter the Network settings into your product,
follow these steps:
Follow Steps 1 through 4 in the ‘Setting Up
the Wireless Network Connection - Auto’
procedure.
When done, press the GREEN (B) button on
your remote, or press the ▲▼◄► buttons to
move the cursor to Done, and then press the
ENTER button. The Network Status screen
appears.
On the Network Status screen, select Cancel,
and then press Enter.
Press the ◄► buttons to select IP Settings,
and then press the ENTER button.
Press the ENTER button to select IP Mode.
Press the ▲▼ buttons to select Manual, and
then press the ENTER button.
Press the ▼ button to go to the first entry field
(IP Address).
Use the number buttons to enter numbers.
1.
2.
3.
4.
✎
▪
1.
2.
3.
4.
5.
6.
7.
8.
Settings
Display
Audio
Channel
Network
System
Language
Security
General
Support
Network Settings
a Previous m Move " Enter ' Return
Enter security key. 0 entered
a b c d e f 1 2 3
g h i j k l 4 5 6
m n o p q r 7 8 9
s t u v w x y z 0
a/A * Delete Space Done
Settings
Display
Audio
Channel
Network
System
Language
Security
General
Support
IP Settings
> Move " Enter ' Return
IP Mode	 Manual
IP Address	 0 . 0 . 0 . 0
Subnet Mask	 0 . 0 . 0 . 0
Gateway	 0 . 0 . 0 . 0
DNS Mode	 Manual
DNS Server	 0 . 0 . 0 . 0
OK
02063N-BD-D8200,D8500-XN-ENG-.in46 46 2011-03-04 오후 5:29:18
Page: 46
English 47
05
Setup
When done with each field, press the ►
button to move successively to the next field.
You can also use the other arrow buttons to
move up, down, and back.
Enter the IP Address, Subnet Mask, and
Gateway values.
Press the ▼ to go to DNS Mode.
Press the ▼ button to go to the first DNS
entry field. Enter the numbers as above.
Press the OK button.
The Network Status screen appears. The
product connects to the network after the
network connection is verified.
WPS(PBC)
The easiest way to set up the wireless network
connection is using the WPS(PBC) function or the
One Foot Connection function.
If your wireless router has a WPS(PBC) button,
follow these steps:
Press the ▲▼ buttons to select WPS(PBC).
Press the ENTER button.
Press the WPS(PBC) button on your
router within two minutes. Your product
automatically acquires all the network settings
values it needs and connects to your network.
The Network Status screen appears. The
player connects to the network after the
network connection is verified.
One Foot Connection
You can set up the wireless connection
automatically if you have a Samsung Wireless
Router which supports One Foot Connection. To
connect using the One Foot Connection function,
follow these steps:
9.
10.
11.
12.
13.
14.
1.
2.
3.
4.
Press the ▲▼ buttons to select One Foot
Connection.
Press the ENTER button.
Place the Samsung Wireless Router within 25
cm (10 inches) of your product to connect.
Wait until the connection is automatically
established.
Network Status
Check whether a connection to the network and
the Internet have been established.
SWL(Samsung Wireless Link)
Mobile devices with Samsung Wireless Link
capability can be connected to your network via
this product.
Off : Set Samsung Wireless Link off.
On : Set Samsung Wireless Link On.
If you select On, press the ▲▼ buttons to
select the Connect SWL, then press the
ENTER button. Please follow the instruction
on TV Screen.
NOTE
If this product turned off, the network connection
using SWL will be disconnected.
1.
2.
3.
4.
•
•
1.
✎
▪
Settings
Display
Audio
Channel
Network
System
Language
Security
General
Support
Network Settings
> Move " Enter ' Return
One Foot
Connection
Wireless
(general)
Wired
Select a network connection type.
Connect to the wireless router easily by pressing the
WPS(PBC) button. Choose this if your wireless router
supports push button configuration(PBC).
WPS(PBC)
Settings
Display
Audio
Channel
Network
System
Language
Security
General
Support
Network Settings
> Move " Enter ' Return
Wireless
(general)
Wired
Select a network connection type.
Connect to the wireless network automatically if your
wireless router supports One Foot Connection. Select
this connection type after placing the wireless router
within 10 inches (25 cm) of product.
One Foot
Connection
WPS(PBC)
Settings
Display
Audio
Channel
Network
System
Language
Security
General
Support
Network Status
< Move " Enter ' Return
MAC Address	 XX:XX:XX:XX:XX:XX
IP Address	 0.0.0.0
Subnet Mask	 0.0.0.0
Gateway	 0.0.0.0
DNS Server	 0.0.0.0
Internet is connected successfully.
If you have a problem using any Internet services, contact your Internet service
provider.
IP Settings Retry OK
Network Settings
iptime
02063N-BD-D8200,D8500-XN-ENG-.in47 47 2011-03-04 오후 5:29:18
Page: 47
48 English
Setup
AllShare Server Management
Manage content sharing function. You can share
media contents (videos, music, photos) via the
AllShare function.
AllShare Server : Set the server function.
Change Server Name : Set the server name.
Enables you to identify the server on a network.
Device Access Control : Configures access
authorization for individual device.
BD-Live Internet Connection
Set to allow or prohibit an Internet connection
when you use the BD-LIVE service.
Allow (All) : The Internet connection is allowed
for all BD-LIVE contents.
Allow (Valid Only) : The Internet connection is
allowed only for BD-LIVE contents containing a
valid certificate.
Prohibit : No Internet connection is allowed for
any BD-LIVE content.
NOTE
What is a valid certificate?
When the product uses BD-LIVE to send the disc data
and a request to the server to certify the disc, the
server uses the transmitted data to check if the disc is
valid and sends the certificate back to the product.
The Internet connection may be restricted while you
are using BD-LIVE contents.
System
Plug & Play
By using Plug & Play, you can set country, clock
mode and Network Settings, etc.
For more information about the Plug & Play
function, refer to the Plug & Play section of this
user manual. (See pages 32~53)
NOTE
If you want to change plug & play options, you
should enter the password.
•
•
•
•
•
•
✎
▪
▪
✎
▪
Clock
Set time-related functions.
Clock Mode : You can set it to Auto or Manual.
Clock Set : If Clock Mode set to Manual, the
this menu will be activated.
Time Zone : You can specify the time zone that
is applicable to your area. (If you set the country
to Spain or others, and Clock Mode set to Auto,
this menu will appear.)
NOTE
If Timer Viewing and Timer Recording is set using
GUIDE, Channel List, or Info menu, It will work based
on the time information of the TV programme.
If you set the Clock Mode to Manual and change
time manually, Timer Viewing and Timer Recording
function can be limited or work abnormally.
Anynet+(HDMI-CEC)
Anynet+ is a convenient function that offers linked
operations with other Samsung products that
have the Anynet+ feature.
To operate this function, connect this product to a
Samsung TV with an HDMI cable.
With Anynet+ on, you can operate this product
using a Samsung TV remote control and start
disc playback simply by pressing the PLAY ( )
button on the TV’s remote control.
For more information, please see the TV user
manual.
Off : Anynet+ functions will not work.
On : Anynet+ functions will work.
NOTE
This function is not available if the HDMI cable does
not support CEC.
If your Samsung TV has an Anynet+ logo, then it
supports the Anynet+ function.
Depending on your TV, certain HDMI output
resolutions may not work.
Please refer to the user manual of your TV.
If you press the Play button of TV when product is in
DTV mode, Time Shift function will start.
•
•
•
✎
▪
•
•
✎
▪
▪
▪
▪
02063N-BD-D8200,D8500-XN-ENG-.in48 48 2011-03-04 오후 5:29:19
Page: 48
English 49
05
Setup
Device Management
Manage internal HDD and external devices.
You can manage options such as device format
and default recording device.
Device Format : Format the device.
Checking Device : Checks for errors on the
device.
Device Performance Test : Test the recording
performance of the device.
Default Recording Device : Select default
recording device.
By HDD
Select the Default Recording Device, and
then press the ENTER button.
Select recording device to HDD. (You can
also check available storage in this menu.)
•
•
•
•
1.
2.
By External Device
In Stop mode, connect the external storage
device to the USB port on the front panel of
the product.
Select the Device Format, and then press
the ENTER button. Device format will be
started.
Select the Default Recording Device, and
then press the ENTER button.
Select recording device to connected external
device. (You can also check available storage
in this menu.)
NOTE
It may take several times to detect a connected
external device.
The total size of device must have at least 375MB of
free space to use the time shift function.
In case of USD HDD is used for recording, Don't
plug-out USB HDD Device during format.
Recording Function is supported only for DTV.
Recording Function is not supported for data
channel.
Maximum length of Recording or Time shift is
affected by available size of storage device and the
Video resolution of TV Programme.
BD Data Management
Enables you to manage the downloaded contents
from a Blu-ray Disc that supports the BD-LIVE
service.
You can check the device information including
the storage size, delete the BD data.
1.
2.
3.
4.
✎
▪
▪
▪
▪
▪
▪
Settings
Display
Audio
Channel
Network
System
Language
Security
General
Support
Plug & Play
HDMI Deep Color	 : Auto
Device Management
Device Format
Checking Device
Device Performance Test
Default Recording Device	 : HDD
> Move " Enter ' Return
Settings
Display
Audio
Channel
Network
System
Language
Security
General
Support
Plug & Play
HDMI Deep Color	 : Auto
Default Recording Device
> Move " Enter ' Return
Select default device for recording.
HDD	 XXX.XX GB/XXX.XX GB
	 	 HDD	 Internal storage
	 	 abc	 Recordable
Settings
Display
Audio
Channel
Network
System
Language
Security
General
Support
Plug & Play
HDMI Deep Color	 : Auto
Default Recording Device
> Move " Enter ' Return
Select default device for recording.
HDD	 XXX.XX GB/XXX.XX GB
	 	 HDD	 Internal storage
	 	 abc	 Recordable
02063N-BD-D8200,D8500-XN-ENG-.in49 49 2011-03-04 오후 5:29:19
Page: 49
50 English
Setup
Current Device : Displays the current device.
Total Size : Displays the total size of the device.
(Storage)
Available Size : Displays the available size of
the device. (Storage)
Delete BD Data : Press this to delete the BD
data.
NOTE
The total size of BD Data Management may differ,
depending on the conditions.
DivX® Video On Demand
View DivX® VOD Registration Codes to purchase
and play DivX® VOD contents.
Reset
All settings will revert to the default except for the
network and Smart Hub settings.
Language
You can select the language you prefer for the
Home menu, disc menu, etc.
On-Screen Menu : Select the language for the
on-screen displays.
BD/DVD Disc Menu : Select the language for
the disc menu displays.
BD/DVD Audio : Select the language for disc
audio language.
BD/DVD Subtitle : Select the language for disc
subtitle language.
DTV Primary Audio : Select the language for
DTV primary audio language.
DTV Secondary Audio : Select the language
for DTV secondary audio language.
DTV Primary Subtitle : Select the language for
DTV primary subtitle language.
DTV Secondary Subtitle : Select the language
for DTV secondary subtitle language.
DTV Primary Teletext : Select the language for
DTV primary teletext language.
DTV Secondary Teletext : Select the language
for DTV secondary teletext language.
NOTE
The selected language will only appear if it is
supported on the disc or broadcast channel.
•
•
•
•
✎
▪
•
•
•
•
•
•
•
•
•
•
✎
▪
Security
This function works in conjunction with Blu-ray
Disc/DVDs that have been assigned an age rating
or numeric rating that indicates the maturity level
of the content. These numbers help you control
the types of Blu-ray Disc/DVDs that your family
can watch.
When you access this function, the security screen
appears. Enter the your Security password. (The
default password is 0000.)
NOTE
Password
France only : Enter the desired 4-digit password
using the number buttons.
* You can not set the password to“0000”.
Please choose other numbers.
Other : Enter the desired 4-digit password using
the number buttons.
* Default password is set to 0000.
DTV Channel Lock
You can lock some channels using the Channel
Lock function so that children cannot watch them.
Off : DTV Channel Lock will not work.
On : DTV Channel Lock will work.
DTV Program Rating Lock
This function works in conjunction with DTV that
have been assigned a rating, which helps you
control the types of DTV that your family watches.
Select the rating level you want to set.
BD Parental Rating
Prevent playback of Blu-ray Discs with specific
age ratings unless a password is entered.
DVD Parental Rating
Prevent playback of DVDs with specific numerical
ratings unless a password is entered.
A larger number indicates that the programme is
intended for adult use only. For example, if you
select up to Level 6, discs that contain Level 7, 8
will not play.
✎
▪
-
▪
-
•
•
02063N-BD-D8200,D8500-XN-ENG-.in50 50 2011-03-04 오후 5:29:19
Page: 50
English 51
05
Setup
Change PIN
Change the 4-digit password used to access
security functions.
If you forgot your password
Press the MENU button to display home
menu with no disc inserted.
Press the STOP ( ) button on the front
panel of the product for more than 5 seconds.
All settings will revert to the factory settings.
NOTE
When the factory default settings are restored, all
the user stored BD data will be deleted.
General
Energy Saving
You can reduce power consumption by setting
the front panel to turn off automatically when the
product is in standby mode.
Off : Set not to use the energy saving function.
On : Turn off the front panel automatically when
the product is in standby mode.
Light Effect
You can adjust the light effect on the product.
Always On : Activate Light Effect at all times.
It is recommended for continuous display for
commercial or demonstration use.
Auto : Activate Light Effect when you turn the
product on or off and when you insert or eject a
disc. This is recommended for home use.
Off : Turn Light off.
Advanced Music Copy
When you copy music files, information can be
updated automatically. The copying time may be
increased.
Off : Turn Advanced Music Copy Off.
On : Turn Advanced Music Copy On.
NOTE
This feature is available only when the product is
connected to the network.
1.
2.
✎
▪
•
•
•
•
•
•
•
✎
▪
This can be used if you copy from an external device
such as USB/ODD/AllShare to the HDD.
This will not work if you copy from the HDD to an
external device.
Network Remote Control
The Network Remote Control function lets you
control your product from a remote device such
as a smart phone through a wireless connection
to your local area network.
To use the Network Remote Control function,
follow these steps:
Select On in the Network Remote Control
menu.
Install the Samsung network remote control
application to control your product on your
compatible portable device.
Make sure your portable device and your
product are connected to the same wireless
router.
Start the application on your portable device.
The application should find your product and
display it on a list.
Select the product.
If this is the first time you are using the
function, it will ask you to allow or deny
remote control of the product. Select Allow.
Follow the instructions that came with the
application to control the product.
Support
Software Upgrade
The Software Upgrade menu allows you to
upgrade the product’s software for performance
improvements or additional services.
By Internet
To upgrade by Internet, follow these steps:
Select By Internet, and then press the
ENTER button. The Connecting to Server
message appears.
If there is a download available, the Download
pop-up appears with a progress bar and the
download starts.
▪
▪
1.
2.
3.
4.
5.
6.
7.
1.
2.
02063N-BD-D8200,D8500-XN-ENG-.in51 51 2011-03-04 오후 5:29:19

Question & answers

There are no questions about the Samsung BD-D8500 yet.

Ask a question about the Samsung BD-D8500

Have a question about the Samsung BD-D8500 but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Samsung BD-D8500. Please make sure that you describe your difficulty with the Samsung BD-D8500 as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.