Polaroid Snap manual

View a manual of the Polaroid Snap below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Polaroid
  • Product: Instant print camera
  • Model/name: Snap
  • Filetype: PDF
  • Available languages: English, German, French, Spanish, Italian, Portuguese

Table of Contents

Page: 0
Instant Print Digital Camera
USER GUIDE
Page: 1
What’s in the Box
Get to Know Your Polaroid Snap™
Turning On
Turning Off
Taking Photos
Printing
Inserting Photo Paper
Refilling Photo Paper
Paper Do’s & Don’ts
Memory
Inserting an SD Card
Removing an SD Card
SD Card Memory
Transferring Files
Via USB Cable
Via SD Card
Battery & Charging
Auto Sleep
Self-Timer
Adding Effects
Photo Frames
Color Tints
Photo Booth
Precautions & Safety Tips
Table of Contents
2
3
6
6
6
6
7
7
7
8
8
8
9
9
9
9
9
10
10
10
10
10
10
11
Hello and welcome to the Polaroid Snap™
.
Page: 2
2 3
1. Flash
2. 
Lens with
Magnetic Cap
3. Print Slot
Get to Know Your Polaroid Snap™
3
2
1
What’s in the Box
Camera Strap
Polaroid Snap™
Instant Print Camera Micro USB Cable
Page: 3
4 5
11.	Polaroid Border
Selector
12.	Color Mode Selector
13.	Pop-Up Viewfinder/
Power Switch
14.	Shutter Button
15.	Self-Timer
Top View
1
1 13
15
12 14
10
	4.	MicroSD Card Slot
	 5.	Wrist Strap Anchor
	6.	
Micro USB Connector
	 7
.	Battery Status LED
	8.	Paper Status LED
	 9.	MicroSD Card
Status LED
	
10.	Paper Door Latch
4
5
6 10
7
8
9
Back View
Page: 4
6 7
Turning On
Your On/Off switch is your viewfinder. To
turn on your Snap, gently press the power
icon on the viewfinder. Your viewfinder will
pop up and your camera will turn on.
Turning Off
Use slight pressure to push the viewfinder
back to a closed position. Your camera is
now off.
Taking Photos
Is the lens cap off? Good! Press and release
the shutter button and voila! You’ve taken
a photo.
Your camera will automatically flash and auto
focus for every photo. A lens cap has been
included to keep your lens clean and scratch-
free. Don’t forget to use it!
Printing
The Snap camera instantly prints every photo
for you when ZINK Paper™
is loaded.
Using Your Snap Inserting Photo Paper
1. 
Slide the latch on the paper tray and open
the door.
2. 
Slide the entire pack of ZINK Paper™
into the paper tray.
– 
Make sure the ZINK Smart Sheet™
is placed and loaded with the bar code
face down.
– Shiny side of paper faces up.
3. Close the paper tray door.
The ZINK Smart Sheet™
will eject when you
take a picture, then your photo will print.
For bright, sharp instant photos that come
out dry to the touch and ready to peel and
stick, we recommend Polaroid Premium
ZINK Paper™
.
Refilling Photo Paper
When the last Zink Paper™
is used, the LED
next to the paper icon on the back of your
Snap will glow red. You can now safely reload
printing paper into your camera.
Paper Do’s & Don’ts
– 
Do not add more paper if the paper
compartment is not completely empty.
– 
Do not fill the paper compartment with
Page: 5
8 9
more than one 10-pack of Premium
ZINK Paper™
. Filling over 10 sheets can
damage the printer.
– 
Do avoid bending the ZINK Paper™
.
– 
Do hold the paper by its edges. Avoid
touching the surface with your fingers.
If there is a paper jam, if you insert the
wrong type of paper, or there is some other
printing/paper related error, all indicators
will blink red. Open your camera and correct
the error (clear jam, replace paper, etc.) then
restart your camera.
Memory
Your Snap is built with enough memory to
capture and print one 5MP image at a time.
Inserting an SD Card
Your Snap comes with an SD Card slot for
images that you’d like to save, as well as
print. To insert a memory card, gently guide
the SD card into the slot on the side of
your camera. You’ll feel a slight click when
the card is fully inserted and the SD LED
will glow white. Use cards with up to 32GB
max capacity.
Removing an SD Card
Give a light tap to the top of the card
and the SD card will pop out. Pull to fully
remove from your Snap.
SD Card Memory Indicator
When the memory on your SD card dips
below 1GB the LED on the back of your
Snap will glow red. When the memory
reaches zero, or if there is an error reading
the SD card, the LED will blink red.
Transferring Files
Via USB Cable
– 
Using the included micro USB cable,
connect your Snap to a computer. Double-
click the SD card when it appears on your
computer desktop to view and save your
images to a photo roll or other location.
Via SD Card
– 
Remove the SD card per the directions
above then insert the card into your
card reader.
Battery & Charging
When the battery power dips below 10%
the battery LED will glow red. At 2% power,
your camera will automatically shut down.
To charge your Snap, plug it into either a
wall outlet or computer, using the included
micro USB cable. The battery LED will blink
red until the battery is fully charged.
Page: 6
10 11
Auto Sleep
To help save battery power, your Snap
will automatically go into sleep mode
after several minutes of no use. To turn
your camera back on, close and re-open
the viewfinder.
Self-Timer
Your Snap comes with a ten-second
self-timer. To set it, press the timer button
(located on the top of the camera), then
press the shutter button. The timer button
will blink white while the timer counts
down and in ten seconds, your photo will
be captured.
Adding Effects
Photo Frames
– 
To add a Polaroid border to your print,
press the frame button located on top of
your camera.
Color Tints
– 
To give your print a sepia or black and white
treatment, press the color button (located
on the top of your camera) to select the
color tint for your next print.
Photo Booth
– 
To take photos with a photo booth effect,
press and hold the shutter button for three
seconds. The timer button will blink and
the camera will take four photos in a row,
capturing a photo every four seconds. The
photos will print on one sheet with these
four consecutive images.
Precautions & Safety Tips
Turn the power off if:
– 
Foreign objects or water enter the camera
– 
The camera has been dropped or its case
has been damaged
Continued use after these issues may cause
personal injury.
Service should only be performed by a
qualified technician.
This camera isn’t waterproof. It’s not water-
resistant, either, so use caution when using
near water.
Do not place the camera on unstable surfaces.
Adult supervision is recommended when the
product is being operated by young children.
Do not use the camera while you are
walking, driving or riding a motorcycle.
This may result in you having an accident.
For optimal performance, use your Snap
in temperatures between 60°F and 90°F
(15.6°C and 32.2°C) and between 20% to
Page: 7
12 13
80% relative humidity.
Do not use the camera near sand as this
may damage the camera.
Do not fire the flash close to anyone’s eyes.
This may cause damage to the person’s
eyesight.
This camera is a precision instrument. Do
not drop, strike or use excessive force when
handling the camera.
Do not use the camera in humid, steamy,
smoky or dusty places. This may cause fire
or electric shock.
Use the camera in a well-ventilated area. Do
not wrap the camera or place it in cloth or
blankets. This may cause heat to build up and
deform the case, resulting in personal injury.
Do not leave the camera in places where the
temperature may rise significantly, such as
the inside of a car. This may adversely affect
the performance of the product.
Before moving the camera, disconnect
all cords and cables. Failure to do this may
damage cords and cables, resulting in
personal injury or damage to the product.
Notes on Battery Usage
Carefully read and strictly observe the safety
instructions and the notes described below:
– 
Use only the included, non-removable
battery (7
.4V).
– 
Avoid extremely cold environments as low
temperatures can shorten the battery life
and reduce camera performance.
– 
When you are using a Polaroid Snap
that has not been used for an extended
period of time, it may affect the battery
life and the number of images that can
be captured. To maximize its battery
performance and lifetime, we recommend
that you fully charge the battery and
discharge it for at least one complete cycle
before use.
– 
Properly dispose of the battery when
disposing of the camera.
– 
Do not disassemble the Snap camera or
remove the battery at any time. The battery
is not designed to be removed from the
camera, nor charged outside the camera.
Page: 8
15
14
Disclaimer
During extended use, your Polaroid Snap
camera may feel warm to the touch. This
is a normal operating occurrence and does
not indicate any product defect or reason
to slow down the fun.
That’s it!
Have questions? Need technical support?
Want to know more? Get in touch at:
cspolaroid@camarketing.com
www.polaroidsnapcamera.com
WARNING STATEMENTS
Federal Communication Commission
Interference Statement
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the
following measures:
– 
Reorient or relocate the receiving antenna.
– 
Increase the separation between the equipment
and receiver.
– 
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
– 
Consult the dealer or an experienced radio/TV technician
for help.
FCC Caution: Any changes or modifications not expressly
approved by the party responsible for compliance could
void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
Page: 9
16 17
This device and its antenna(s) must not be co-located
or operating in conjunction with any other antenna or
transmitter.
For product available in the USA/Canada market, only
channel 1~11 can be operated. Selection of other
channels is not possible.
IMPORTANT NOTE:
Federal Communication Commission (FCC)
Radiation Exposure Statement
This EUT is compliance with SAR for general population/
uncontrolled exposure limits in ANSI/IEEE C95.1-1999 and
had been tested in accordance with the measurement
methods and procedures specified in OET Bulletin 65
Supplement C. This equipment should be installed and
operated contact with the radiator & your body.
This device complies with Industry Canada’s licence-
exempt RSSs. Operation is subject to the following two
conditions:
(1) 
This device may not cause interference; and
(2) 
This device must accept any interference, including
interference that may cause undesired operation of
the device.
IMPORTANT NOTE:
IC Radiation Exposure Statement
This EUT is compliance with SAR for general population/
uncontrolled exposure limits in IC RSS-102 and had been
tested in accordance with the measurement methods
and procedures specified in IEEE 1528. This equipment
should be installed and operated with minimum distance
0cm between the radiator & your body.
CAN ICES-3 (B)/NMB-3(B)
ELECTRONIC WASTE
PLR IP Holdings, LLC, its licensees and affiliates, fully
supports all electronic waste initiatives. As responsible
stewards of the environment, and to avoid violating
established laws, you should properly dispose of this
product in compliance with all applicable regulations,
directives or other governances in the area where
you reside. Please check with local authorities or the
retailer where you purchased this product to determine
a location where you can appropriately dispose of the
product.You may also go to www.polaroid.com and
reference Social Responsibility www.polaroid.com/social-
responsibility to learn more about the specific laws in your
area and to locate a collection facility near your home.
If your electronic device has internal memory on which
personal or other confidential data may be stored, you
may want to perform a data sanitization process before
you dispose of your device to assure another party
cannot access your personal data. Data sanitization varies
by the type of product and its software, and you may
want to research the best sanitization process for your
device before disposal. You may also check with your
local recycling facility to determine their data sanitization
procedures during the recycling process.
Polaroid, Polaroid & Pixel, Polaroid Classic Border
Logo, Polaroid Color Spectrum, and Polaroid Snap are
trademarks of PLR IP Holdings, LLC, used under license.
All other trademarks are the property of the respective
owner, who has not sponsored, endorsed or approved
this product. PLR IP Holdings, LLC does not manufacture
this product or provide any Manufacturer’s Warranty
or support.
Page: 10
18
Distributed by C&A Licensing, LLC.,
2 Bergen Turnpike, Ridgefield Park, NJ 07660, USA
www.polaroid.com
© 2015 All Rights Reserved
Patent Pending
For Warranty information, go to
www.polaroidsnapcamera.com/support

Question & answers

There are no questions about the Polaroid Snap yet.

Ask a question about the Polaroid Snap

Have a question about the Polaroid Snap but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Polaroid Snap. Please make sure that you describe your difficulty with the Polaroid Snap as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.