Pioneer XW-NAS3 manual

View a manual of the Pioneer XW-NAS3 below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Pioneer
  • Product: Cradle / docking station
  • Model/name: XW-NAS3
  • Filetype: PDF
  • Available languages: English, Spanish, Dutch, German, Italian, Russian, French

Table of Contents

Page: 0
Digital Speaker System for iPod
Sistema digital de parlantes para iPod
ᎍңŪőŰť‫ޠ‬኶՞ඵᖑᏣ‫ق‬ಜ
XW-NAS3
Operating Instructions
Manual de instrucciones
XW-NAS3_LPWXJ.book 1 ページ 2010年1月26日 火曜日 午後4時27分
Page: 1
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.
CAUTION:
TO PREVENT THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
IMPORTANT
D3-4-2-1-1_A1_En
WARNING
This equipment is not waterproof. To prevent a fire or
shock hazard, do not place any container filled with
liquid near this equipment (such as a vase or flower
pot) or expose it to dripping, splashing, rain or
moisture.
D3-4-2-1-3_A1_En
WARNING
Before plugging in for the first time, read the following
section carefully.
The voltage of the available power supply differs
according to country or region. Be sure that the
power supply voltage of the area where this unit
will be used meets the required voltage (e.g., 230 V
or 120 V) written on the bottom panel.
D3-4-2-1-4*_A1_En
WARNING
To prevent a fire hazard, do not place any naked flame
sources (such as a lighted candle) on the equipment.
D3-4-2-1-7a_A1_En
VENTILATION CAUTION
When installing this unit, make sure to leave space
around the unit for ventilation to improve heat radiation
(at least 20 cm at top, 10 cm at rear, and 10 cm at each
side).
WARNING
Slots and openings in the cabinet are provided for
ventilation to ensure reliable operation of the product,
and to protect it from overheating. To prevent fire
hazard, the openings should never be blocked or
covered with items (such as newspapers, table-cloths,
curtains) or by operating the equipment on thick carpet
or a bed.
D3-4-2-1-7b*_A1_En
POWER-CORD CAUTION
Handle the power cord by the plug. Do not pull out the
plug by tugging the cord and never touch the power
cord when your hands are wet as this could cause a
short circuit or electric shock. Do not place the unit, a
piece of furniture, etc., on the power cord, or pinch the
cord. Never make a knot in the cord or tie it with other
cords. The power cords should be routed such that they
are not likely to be stepped on. A damaged power cord
can cause a fire or give you an electrical shock. Check
the power cord once in a while. When you find it
damaged, ask your nearest PIONEER authorized
service center or your dealer for a replacement.
S002*_A1_En
Operating Environment
Operating environment temperature and humidity:
+5 °C to +35 °C (+41 °F to +95 °F); less than 85 %RH
(cooling vents not blocked)
Do not install this unit in a poorly ventilated area, or in
locations exposed to high humidity or direct sunlight (or
strong artificial light)
D3-4-2-1-7c*_A1_En
Note: This indication is printed on the inner of the bottom cover.
XW-NAS3_LPWXJ.book 2 ページ 2010年1月26日 火曜日 午後4時27分
Page: 2
This product is for general household purposes. Any
failure due to use for other than household purposes
(such as long-term use for business purposes in a
restaurant or use in a car or ship) and which requires
repair will be charged for even during the warranty
period.
K041_A1_En
These symbols are only valid
in the European Union.
K058c_A1_En
(Symbol examples for batteries)
Pb
If the AC plug of this unit does not match the AC
outlet you want to use, the plug must be removed
and appropriate one fitted. Replacement and
mounting of an AC plug on the power supply cord of
this unit should be performed only by qualified
service personnel. If connected to an AC outlet, the
cut-off plug can cause severe electrical shock. Make
sure it is properly disposed of after removal.
The equipment should be disconnected by removing
the mains plug from the wall socket when left unused
for a long period of time (for example, when on
vacation).
D3-4-2-2-1a_A1_En
CAUTION
The STANDBY/ON switch on this unit will not
completely shut off all power from the AC outlet.
Since the power cord serves as the main disconnect
device for the unit, you will need to unplug it from the
AC outlet to shut down all power. Therefore, make
sure the unit has been installed so that the power
cord can be easily unplugged from the AC outlet in
case of an accident. To avoid fire hazard, the power
cord should also be unplugged from the AC outlet
when left unused for a long period of time (for
example, when on vacation).
D3-4-2-2-2a*_A1_En
When using this product, confirm the safety
information shown on the bottom of the unit.
D3-4-2-2-4_B1_En
XW-NAS3_LPWXJ.book 3 ページ 2010年1月26日 火曜日 午後4時27分
Page: 3
4
En
Thank you for buying this Pioneer product.
Please read through these operating instructions so that you will know how to operate your model
properly. After you have finished reading the instructions, put them in a safe place for future
reference.
Contents
01 Before you start
What’s in the box . . . . . . . . . . . . . . . . . . . . . . . 5
Before using the remote control . . . . . . . . . . . . 5
Replace the battery . . . . . . . . . . . . . . . . . . . . 5
Using the remote control . . . . . . . . . . . . . . . . 6
Installing the unit . . . . . . . . . . . . . . . . . . . . . . . 6
Plugging in . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
02 Controls and displays
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . 7
Front /top panel . . . . . . . . . . . . . . . . . . . . . . . . 7
03 iPod playback
Confirm what iPod models are supported. . . . . 8
Connecting your iPod . . . . . . . . . . . . . . . . . . . . 8
Connecting your TV . . . . . . . . . . . . . . . . . . . . 9
Playing your iPod . . . . . . . . . . . . . . . . . . . . . . 10
Using the tone controls . . . . . . . . . . . . . . . . 10
04 Bluetooth® ADAPTER for Wireless
Enjoyment of Music
Wireless music play . . . . . . . . . . . . . . . . . . . . 12
Remote control operation. . . . . . . . . . . . . . . 12
Connecting Optional Bluetooth ADAPTER . . . 12
Setting the PIN code. . . . . . . . . . . . . . . . . . . . 13
Pairing Bluetooth ADAPTER and Bluetooth
wireless technology device . . . . . . . . . . . . . . . 13
Listening to Music Contents of Bluetooth
wireless technology device with Your System . . . 14
05 Other connections
Connecting auxiliary components. . . . . . . . . . 15
06 Additional information
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . 16
Resetting the system . . . . . . . . . . . . . . . . . . . 17
About iPod/iPhone . . . . . . . . . . . . . . . . . . . . . 17
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . 17
Cleaning the unit . . . . . . . . . . . . . . . . . . . . . . 18
XW-NAS3_LPWXJ.book 4 ページ 2010年1月26日 火曜日 午後4時27分
Page: 4
Before you start 01
5
En
English
Français
Español
Chapter 1:
Before you start
What’s in the box
Please confirm that the following accessories
are in the box when you open it.
• Remote control
• Remote control holder
• Lithium battery (CR2025)
• Power cords x2
(Some models are not supplied with power
cord.)
• Cleaning cloth
• Operating instructions (This document)
Before using the remote control
The remote control is shipped already set in the
remote control holder.
The battery supplied with this unit is stored in
the battery casing.
• Remove the protective seal from the
battery casing.
When you notice a decrease in the operating
range, replace the battery (see below).
Replace the battery
When replacing the battery, use a
commercially available Lithium CR2025
battery.
1 Push the release tab to the left to open
the battery casing.
2 Pull out the battery casing.
3 Remove the battery from the casing.
4 Place a new battery in the casing.
Make sure the  side of the battery is facing up
when you place it in the space provided.
Caution
When using lithium batteries, please observe
the following:
• There is danger of explosion if the battery is
incorrectly replaced. Make sure to replace
only with the same or equivalent type
recommended by the manufacturer.
• Dispose of used battery cells immediately
after replacement. Keep away from
children.
• If swallowed, please contact a doctor
immediately.
• Lithium batteries may present a fire or
chemical burn hazard if misused. Do not
disassemble, heat above 100 °C, or
incinerate.
1
1
3
2
XW-NAS3_LPWXJ.book 5 ページ 2010年1月26日 火曜日 午後4時27分
Page: 5
Before you start
01
6
En
• Remove the battery if the unit isn’t going to
be used for a month or more.
• When disposing of used batteries, please
comply with governmental regulations or
environmental public instruction’s rules
that apply in your country or area.
• WARNING
Do not use or store batteries in direct
sunlight or other excessively hot place,
such as inside a car or near a heater. This
can cause batteries to leak, overheat,
explode or catch fire. It can also reduce the
life or performance of batteries.
Using the remote control
The remote has a range of about 7 m at an
angle of about 30º from the remote sensor.
Keep in mind the following when using the
remote control:
• Make sure that there are no obstacles
between the remote and the remote sensor
on the unit.
• Remote operation may become unreliable
if strong sunlight or fluorescent light is
shining on the unit’s remote sensor.
• Remote controllers for different devices
can interfere with each other. Avoid using
remotes for other equipment located close
to this unit.
• Replace the batteries when you notice a fall
off in the operating range of the remote.
Installing the unit
• When installing this unit, make sure to put
it on a level and stable surface.
Don’t install it on the following places:
– on a color TV (the screen may distort)
– near a cassette deck (or close to a device that
gives off a magnetic field). This may interfere
with the sound.
– in direct sunlight
– in damp or wet areas
– in extremely hot or cold areas
– in places where there is vibration or other
movement
– in places that are very dusty
– in places that have hot fumes or oils (such as
a kitchen)
Plugging in
After you’ve finished making all connections,
plug the unit into an AC outlet. The type of cord
which can be used depends on the power
voltage in each region or country. Please make
sure you use the correct cord due to the
possibility of fire or other hazard if used
incorrectly (see below).
1 Plug the supplied power cord into the AC
IN socket on the back of the unit.
2 Plug the other end into a power outlet.
Important
• Before making or changing any
connections, switch off the power and
disconnect the power cord from the AC
outlet.
AC power cord use
Region Plug type
For Australian and New
Zealand exclusively
AS 3112 flat two-pin plug
For Others
European two-pin plug
XW-NAS3_LPWXJ.book 6 ページ 2010年1月26日 火曜日 午後4時27分
Page: 6
Controls and displays 02
7
En
English
Français
Español
Chapter 2:
Controls and displays
Remote control
1  STANDBY/ON
Switches the unit between standby and on.
2 INPUT
Use to select an input source. Press repeatedly
to switch between iPod, Bluetooth ADAPTER1
and external input.
3 VOLUME +/–
Use to set the listening volume.
4 Playback control buttons
Use when operating an iPod or Bluetooth
wireless technology device with this remote
control (page 10, 14).
Front /top panel
1 Speaker units
2 iPod connector port
3  STANDBY/ON
Switches the unit between standby and on.
4 Power indicator
5 INPUT SELECTOR
Use to select an input source. Press repeatedly
to switch between iPod, Bluetooth ADAPTER1
and external input.
6 VOLUME +/–
Use to set the listening volume.
7 Bluetooth ADAPTER indicator
8 Remote sensor
9 iPod indicator
STANDBY/ON
INPUT
VOLUME
1 3
4
2
Note
1 When the Bluetooth ADAPTER is not plugged in the ADAPTER PORT, Bluetooth ADAPTER input mode cannot be selected even
if INPUT is pressed.
1 2
9
8
7
STANDBY/ON INPUT SELECTOR
VOLUME
3 4 5 6
XW-NAS3_LPWXJ.book 7 ページ 2010年1月26日 火曜日 午後4時27分
Page: 7
iPod playback
03
8
En
Chapter 3:
iPod playback
Merely by connecting your iPod to this speaker
system, you can enjoy high-quality digital
sound direct from your iPod. These speakers
can also be connected to a television set,
letting you view images from your iPod.
Playback and volume level setting for iPod
music and images can be performed from this
unit or the iPod itself.
Confirm what iPod models are
supported
This system is compatible with the audio and
video of the iPod nano third generation and
above, iPod classic, iPod touch and iPhone. It
also supports audio playback on the iPod nano
second generation.1
Always use the most recent version of iPod
software available. Operation compatibility
may vary depending on the version of the
software used. You can confirm your software
version by operating your iPod as follows:
1 Select ‘Settings’ from the top menu.
2 Select ‘About’.
The software version will be displayed.
• Consult the Apple website regarding the
newest software versions and instructions
on how to update your version.
Tip
• When using an iPod not supported by this
unit, use a commercially available cable to
connect the iPod to the AUDIO IN
connector of this unit.
Connecting your iPod
Caution
• To prevent damage when connecting an
iPod, always use the Dock adaptor
supplied with your iPod, or a commercially
purchased Dock adaptor designed for your
iPod model.
Note
1 • Some functions may be restricted depending on the model or software version.
• iPod is licensed for reproduction of non-copyrighted materials or materials the user is legally permitted to reproduce.
• Features such as the equalizer cannot be controlled using this system, and we recommend switching the equalizer off before
connecting.
• Pioneer cannot under any circumstances accept responsibility for any direct or indirect loss arising from any inconvenience
or loss of recorded material resulting from the iPod failure.
• When connecting an iPod, use the ‘Speaker’ menu’s ‘Backlight’ item to set the iPod’s backlight function. This does not apply
to iPod touch and iPhone.
MENU



iPod
Dock adaptor
XW-NAS3_LPWXJ.book 8 ページ 2010年1月26日 火曜日 午後4時27分
Page: 8
iPod playback 03
9
En
English
Français
Español
1 Attach the Dock adaptor to iPod
connector port on the top panel of this unit.
• An iPod Dock adaptor is not supplied with
this unit.
When attaching the Dock adaptor, be sure to
orient the front-back directions of the Dock
adaptor correctly. To attach, first place the
protruding tabs on the front side of the adaptor
into the depressions on the iPod connector
port and press into position. When attaching
the adaptor, be careful not to strike the
connectors.
2 Connect your iPod.
Connecting your TV
To watch iPod images on a television, perform
connections using either a composite video
cable or component video cable.
• When using a component video cable for
connections, it is necessary to adjust the
unit’s video output. See Setting the video
output below.
• When an iPod is connected to this unit, the
iPod’s TV output setting is automatically
set to ON. While connected, the iPod can
be used to switch the TV output setting.1
Caution
• Before making or changing the
connections, switch off the power and
disconnect the power cord from the power
outlet. Plugging in should be the final step.
Setting the video output
Adjust the video output on this unit in
accordance with the method used to connect
the television.2
• Default setting: Composite
1 Switch the unit into standby.
2 Press and hold INPUT on the remote
control for three seconds.
The iPod indicator will flash two times, and the
video output will switch to Component. When
step 2 is repeated again, the iPod indicator will
flash one time, and the video output will switch
to Composite.
Note
1 • This function is limited to iPod models providing TV output settings.
• When the iPod is disconnected from this unit, the iPod’s TV output setting returns to its original state.
2 • Stop the iPod’s video playback before adjusting the video output setting. The setting mode is disabled during playback and
pause.
• During the video output setting process, if no button operation is performed for 3 minutes, the setting will be canceled and
power will return to the standby mode.
COMPONENTVIDEO
MONITOR OUT VIDEO 1
VIDEO 2
ADAPTER PORT
Y PB PR AUDIO IN
TV
Component
video cable
(commercially
available)
Composite
video cable
(commercially
available)
INPUT
XW-NAS3_LPWXJ.book 9 ページ 2010年1月26日 火曜日 午後4時27分
Page: 9
iPod playback
03
10
En
Playing your iPod
Caution
• When your iPod is connected to this unit
and you wish to operate the iPod by
touching it directly, be sure to hold the iPod
steady with the other hand to prevent
malfunctions due to faulty contacts.
When an iPod is connected to this unit, iPod
indicator will flash while the unit confirms the
iPod connection and retrieves data from the
iPod. When INPUT is pressed to change the
input to iPod, the connection is completed and
iPod indicator will light steadily.1
Playback and volume level setting for iPod
music and images can be performed from this
unit or the iPod itself.
• When using the iPod to adjust sound
volume, the adjustment will be applied only
to the sound produced from this unit’s
speakers.2
If the iPod is disconnected from
this unit, the iPod’s sound volume will
return to its original setting.
The following operations are possible for iPod,
using the remote control.
Using the tone controls
Adjust the sound tone. Adjustment is
performed from the iPod’s screen.2
The
settings performed here are reflected in the
BASS/TREBLE settings on this unit.
iPod nano or iPod classic:
1 Select ‘Speaker’ from the top menu.
2 Select ‘Tone control’.
3 Select a setting.
iPod touch or iPhone3
:
1 Select ‘Settings’ from the home menu.
2 Select ‘Speaker’.
3 Select ‘Tone control’.
4 Select a setting.
Select one of the following:
• Flat – Revert sound to its natural state.
• Bass ON – Emphasize bass sound.
• Treble ON – Emphasize treble sound.
• Bass/Treble ON – Emphasizes bass and
treble sounds.
Note
1 If an iPod is connected when this unit is in standby mode, the power will turn on and iPod input will be selected automatically.
2 These adjustments are applied to all inputs to the unit.
Button What it does
/ Starts normal playback and pauses/
unpauses playback.
 Press to skip to the start of the current
file, then previous files. Press and hold
to start fast reverse scanning.
 Press to skip to the next file. Press and
hold to start fast forward scanning.
VOLUME
+/–
Use to set the listening volume.
3 This setting may not be supported, depending on the iPod touch or iPhone software version.
XW-NAS3_LPWXJ.book 10 ページ 2010年1月26日 火曜日 午後4時27分
Page: 10
iPod playback 03
11
En
English
Français
Español
Important
If the power indicator and iPod indicator flash
simultaneously, a connection fault is
indicated. Perform the following
troubleshooting checks:
• Check whether the iPod was supported by
this unit.
• Reconnect the iPod to the unit. If this
doesn’t seem to work, try resetting your
iPod.
• Update the iPod software to the latest
version.
If the iPod cannot be operated, check the
following items:
• Is the iPod connected correctly?
Reconnect the iPod to the unit.
• Is the iPod experiencing a hangup? Try
resetting the iPod, and reconnect it to the
unit.
Tip
• iPod recharging occurs whenever an iPod
is connected to this unit. (This function is
supported in standby mode as well.)
• Whenever an iPod is connected to this
unit, turning the unit’s power ON or
switching input to iPod will cause iPod
playback to begin automatically.
• When input is switched from iPod to
another function, the iPod playback stops
automatically.
• If the unit is set to standby when an iPod is
connected, the iPod’s power will be turned
OFF automatically.
XW-NAS3_LPWXJ.book 11 ページ 2010年1月26日 火曜日 午後4時27分
Page: 11
Bluetooth® ADAPTER for Wireless Enjoyment of Music
04
12
En
Chapter 4:
Bluetooth®
ADAPTER for
Wireless Enjoyment of Music
Wireless music play
When the Bluetooth ADAPTER (Pioneer Model
No. AS-BT100) is connected to this unit, a
product equipped with Bluetooth wireless
technology (portable cell phone, digital music
player, etc.) can be used to listen to music
wirelessly.1
Also, by using a commercially
available transmitter supporting Bluetooth
wireless technology, you can listen to music on
a device not equipped with Bluetooth wireless
technology. The AS-BT100 model supports
SCMS-T contents protection, so music can
also be enjoyed on devices equipped with
SCMS-T type Bluetooth wireless technology.
Remote control operation
The remote control supplied with this unit
allows you to play and stop media, and perform
other operations.2
Connecting Optional Bluetooth
ADAPTER
• Before making or changing the
connections, switch off the power and
disconnect the power cord from the AC
outlet.
Remote control operation
This unit
Bluetooth®
ADAPTER
Device not equipped with
Bluetooth wireless technology:
Digital music player
+
Bluetooth audio transmitter (sold
commercially)
Bluetooth wireless technology
enabled device:
Digital music player
Bluetooth wireless
technology enabled device:
Cell phone
Note
1 • It must be necessary that the Bluetooth wireless technology enabled device supports A2DP profiles.
• Pioneer does not guarantee proper connection and operation of this unit with all Bluetooth wireless technology enabled devices.
2 • It must be necessary that the Bluetooth wireless technology enabled device supports AVRCP profiles.
• Remote control operations cannot be guaranteed for all Bluetooth wireless technology enabled devices.
COMPONENTVIDEO
MONITOR OUT VIDEO 1
VIDEO 2
ADAPTER PORT
Y PB PR
Bluetooth®
ADAPTER
XW-NAS3_LPWXJ.book 12 ページ 2010年1月26日 火曜日 午後4時27分
Page: 12
Bluetooth® ADAPTER for Wireless Enjoyment of Music 04
13
En
English
Français
Español
1 Switch the unit into standby and connect
Bluetooth ADAPTER to the ADAPTER PORT
located in the rear panel.
2 Press  STANDBY/ON.
3 Press INPUT to switch to Bluetooth
ADAPTER input mode.1
The Bluetooth ADAPTER indicator blinks.
Setting the PIN code
Set this unit’s PIN code to the same setting as
that for the Bluetooth wireless technology
device used. Supported PIN code setting
values include 0000, 1234 or 8888.
• Default setting: 0000
1 Switch the unit into standby.
2 Press and hold  for three seconds.
The Bluetooth ADAPTER indicator will flash,
and the PIN code will be changed. The number
of flashes corresponds to the newly set PIN
code as follows:
• 1 flash: 0000
• 2 flashes: 1234
• 3 flashes: 8888
Repeat step 2 until the PIN code is reset to the
value desired.
Pairing Bluetooth ADAPTER and
Bluetooth wireless technology
device
“Pairing” must be done before you start
playback of Bluetooth wireless technology
content using Bluetooth ADAPTER. Make sure
to perform pairing first time you operate the
system or any time pairing data is cleared.
“Pairing” is the step necessary to register
Bluetooth wireless technology device to enable
Bluetooth communications.2
For more details,
see also the operating instructions of your
Bluetooth wireless technology device.
1 When the Bluetooth ADAPTER indicator
blinks, press .
The Bluetooth ADAPTER indicator will blinks
fast, and the unit will enter the pairing standby
mode.
2 Switch on the Bluetooth wireless
technology device that you want to make
pairing, place it near the system and set it
into the pairing mode.
Pairing begins.
3 Check to see that the Bluetooth ADAPTER
is detected by the Bluetooth wireless
technology device.
The Bluetooth ADAPTER indicator lights when
Bluetooth wireless technology device is
connected.
The Bluetooth ADAPTER indicator blinks slowly
when Bluetooth wireless technology device is
not connected. In this case, perform the
connection operation from the side of the
Bluetooth wireless technology device.
Note
1 When the Bluetooth ADAPTER is not plugged in the ADAPTER PORT, Bluetooth ADAPTER input mode cannot be selected even
if INPUT is pressed.
INPUT
2 • Pairing is required when you first use Bluetooth wireless technology device and Bluetooth ADAPTER.
• To enable Bluetooth communication, pairing should be done with both of your system and Bluetooth wireless technology
device.
INPUT
XW-NAS3_LPWXJ.book 13 ページ 2010年1月26日 火曜日 午後4時27分
Page: 13
Bluetooth® ADAPTER for Wireless Enjoyment of Music
04
14
En
Listening to Music Contents of
Bluetooth wireless technology
device with Your System
1 Press INPUT to switch to Bluetooth
ADAPTER input mode.
The Bluetooth ADAPTER indicator blinks.
2 Connect the Bluetooth wireless
technology device to the Bluetooth
ADAPTER.
3 Start playback of music contents stored in
Bluetooth wireless technology device.
The following operations are now possible for
Bluetooth wireless technology devices, using
the remote control.1
Button What it does
/ Starts normal playback and pauses/
unpauses playback.
 Press to skip to the start of the current
file, then previous files. Press and hold
to start fast reverse scanning.
 Press to skip to the next file. Press and
hold to start fast forward scanning.
VOLUME
+/–
Use to set the listening volume.
Note
1 • Bluetooth wireless technology device should be compatible with AVRCP profile.
• Depending on Bluetooth wireless technology device you use, operation may differ from what is shown in this table.
XW-NAS3_LPWXJ.book 14 ページ 2010年1月26日 火曜日 午後4時27分
Page: 14
Other connections 05
15
En
English
Français
Español
Chapter 5:
Other connections
• Before making or changing the
connections, switch off the power and
disconnect the power cord from the AC
outlet.
Connecting auxiliary
components
Connect the rear panel AUDIO IN mini-plug
jack to your auxiliary playback component.
• This method can be used to play music on
this unit from iPods that do not support use
of an iPod Dock.
• Press INPUT to switch to external input
mode.
Both the iPod indicator and the Bluetooth
ADAPTER indicator will go out.
COMPONENTVIDEO
MONITOR OUT VIDEO 1
VIDEO 2
Y PB PR AUDIO IN
AC IN
Digital audio
player, etc.
XW-NAS3_LPWXJ.book 15 ページ 2010年1月26日 火曜日 午後4時27分
Page: 15
Additional information
06
16
En
Chapter 6:
Additional information
Troubleshooting
Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is
something wrong with this component, check the points below. Sometimes the trouble may lie in
another component. Investigate the other components and electrical appliances being used. If the
trouble cannot be rectified even after exercising the checks listed below, ask your nearest Pioneer
authorized service center or your dealer to carry out repair work.
• If the unit does not operate normally due to external effects such as static electricity disconnect
the power plug from the outlet and insert again to return to normal operating conditions.
Problem Remedy
The power does not turn on. • Disconnect the power plug from the outlet, and insert again.
• If the power shuts off automatically, take the unit to your nearest
Pioneer authorized service center or your dealer for servicing.
Power automatically switches to
standby without user action.
• When input is set to iPod, if no iPod is connected for one hour or more,
the unit’s power automatically turns OFF.
No sound is output when a
function is selected.
• Make sure the component is connected correctly (refer to Connecting
auxiliary components on page 15).
Can’t operate the remote
control.
• Replace the battery (refer to page 5).
• Operate within 7 m, 30° of the remote sensor on the front panel (refer to
page 6).
• Remove the obstacle or operate from another position.
• Avoid exposing the remote sensor on the front panel to direct light.
The Bluetooth wireless
technology device cannot be
connected or operated. Sound
from the Bluetooth wireless
technology device is not emitted
or the sound is interrupted.
• Check that no object that emits electromagnetic waves in the 2.4 GHz
band (microwave oven, wireless LAN device or Bluetooth wireless
technology apparatus) is near the unit. If such an object is near the unit,
set the unit far from it. Or, stop using the object emitting the
electromagnetic waves.
• Check that the Bluetooth wireless technology device is not too far from
the unit and that obstructions are not set between the Bluetooth wireless
technology device and the unit. Set the Bluetooth wireless technology
device and the unit so that the distance between them is less than about
10 m and no obstructions exist between them.
• Check that the Bluetooth ADAPTER and the ADAPTER PORT of the unit
are correctly connected.
• The Bluetooth wireless technology device may not be set to the
communication mode supporting the Bluetooth wireless technology.
Check the setting of the Bluetooth wireless technology device.
• Check that pairing is correct. The pairing setting was deleted from this
unit or the Bluetooth wireless technology device. Reset the pairing.
• Check that the profile is correct. Use a Bluetooth wireless technology
device that supports A2DP profile and AVRCP profile.
XW-NAS3_LPWXJ.book 16 ページ 2010年1月26日 火曜日 午後4時27分
Page: 16
Additional information 06
17
En
English
Français
Español
Resetting the system
Use this procedure to reset all system settings
to the factory default.
• When performing reset, first disconnect all
components connected to this unit.
1 Switch the unit on.
2 Press and hold VOLUME – on the top
panel, and then press and hold  STANDBY/
ON for three seconds.
Power is set to standby mode.
The next time you switch on, all the system
settings should be reset.
About iPod/iPhone
“Made for iPod” means that an electronic
accessory has been designed to connect
specifically to iPod and has been certified by the
developer to meet Apple performance standards.
“Works with iPhone” means that an electronic
accessory has been designed to connect
specifically to iPhone and has been certified by
the developer to meet Apple performance
standards.
Apple is not responsible for the operation of
this device or its compliance with safety and
regulatory standards.
iPod is a trademark of Apple Inc., registered in
the U.S. and other countries. iPhone is a
trademark of Apple Inc.
Specifications
• Amplifier section
RMS Power Output:
Front Left/Right. . . . . . . . . . . . . . . 15 W + 15 W
(1 kHz, 10 %, T.H.D., 8 Ω)
Subwoofer. . . . . . . . . . . . . . . . . . . . . . . . . . 30 W
(100 Hz, 10 %, T.H.D., 4 Ω)
• Speaker section
Enclosure . . Bass-reflex (magnetically shielded)
System. . . . . . . . . . . . . . . . . . . . . . . . 2-way system
Speakers:
Subwoofer. . . . . . . . . . . . . . . . . . . . 10 cm cone
Fullrange . . . . . . . . . . . . . . . . . . . . . 5.2 cm cone
Frequency range. . . . . . . . . . . . . . 50 Hz to 20 kHz
• Miscellaneous
Power requirements
. . . . . . . . . . . . . . . AC 110 V to 240 V, 50 Hz/60 Hz
Power consumption . . . . . . . . . . . . . . . . . . . . 30 W
In standby . . . . . . . . . . . . . . . . . . . . . . . . . 0.5 W
Dimensions
. . . . . . . 420 mm (W) x 148 mm (H) x 210 mm (D)
Weight (without package) . . . . . . . . . . . . . . 4.9 kg
• Accessories
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Remote control holder . . . . . . . . . . . . . . . . . . . . . 1
Lithium battery (CR2025) . . . . . . . . . . . . . . . . . . . 1
Power cord* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Cleaning cloth. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Operating instructions (This document)
*Some models are not supplied with power
cord.
Note
• Specifications and the design are subject
to possible modifications without notice,
due to improvements.
XW-NAS3_LPWXJ.book 17 ページ 2010年1月26日 火曜日 午後4時27分
Page: 17
Additional information
06
18
En
Cleaning the unit
• Use a polishing cloth or dry cloth to wipe
off dust and dirt.
• When the surface is dirty, wipe with a soft
cloth dipped in some neutral cleanser
diluted five or six times with water, and
wrung out well, and then wipe again with a
dry cloth. Do not use furniture wax or
cleansers.
• Never use thinners, benzine, insecticide
sprays or other chemicals on or near this
unit, since these will corrode the surface.
Published by Pioneer Corporation.
Copyright © 2010 Pioneer Corporation.
All rights reserved.
XW-NAS3_LPWXJ.book 18 ページ 2010年1月26日 火曜日 午後4時27分
Page: 18
Additional information 06
19
En
English
Français
Español
XW-NAS3_LPWXJ.book 19 ページ 2010年1月26日 火曜日 午後4時27分
Page: 54
其他資訊 06
19
Zhtw
English
English
XW-NAS3_LPWXJ_Zhtw.book 19 ページ 2010年1月26日 火曜日 午後4時32分
Page: 55
<ARE7656-A>
Published by Pioneer Corporation.
Copyright © 2010 Pioneer Corporation.
All rights reserved.
Printed in
PIONEER CORPORATION
1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, Japan
PIONEER ELECTRONICS (USA) INC.
P.O. BOX 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404
PIONEER ELECTRONICS OF CANADA, INC.
300 Allstate Parkway, Markham, Ontario L3R 0P2, Canada TEL: 1-877-283-5901, 905-479-4411
PIONEER EUROPE NV
Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: 03/570.05.11
PIONEER ELECTRONICS ASIACENTRE PTE. LTD.
253 Alexandra Road, #04-01, Singapore 159936 TEL: 65-6472-7555
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
178-184 Boundary Road, Braeside, Victoria 3195, Australia, TEL: (03) 9586-6300
PIONEER ELECTRONICS DE MEXICO S.A. DE C.V.
Blvd.Manuel Avila Camacho 138 10 piso Col.Lomas de Chapultepec, Mexico, D.F. 11000 TEL: 55-9178-4270
K002_B1_En
XW-NAS3_LPWXJ.book 18 ページ 2010年1月26日 火曜日 午後4時27分

Question & answers

There are no questions about the Pioneer XW-NAS3 yet.

Ask a question about the Pioneer XW-NAS3

Have a question about the Pioneer XW-NAS3 but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Pioneer XW-NAS3. Please make sure that you describe your difficulty with the Pioneer XW-NAS3 as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.