Pioneer X-SMC5-K manual

View a manual of the Pioneer X-SMC5-K below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Pioneer
  • Product: Cradle / docking station
  • Model/name: X-SMC5-K
  • Filetype: PDF
  • Available languages: English, French, Spanish, Indonesian, Dutch, German, Italian, Russian

Table of Contents

Page: 1
WARNING
Store small parts out of the reach of children and
infants. If accidentally swallowed, contact a doctor
immediately.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.
CAUTION:
TO PREVENT THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
%#76+10
4+5-1('.'%64+%5*1%-
&101612'0
IMPORTANT
D3-4-2-1-1_A1_En
WARNING
This equipment is not waterproof. To prevent a fire or
shock hazard, do not place any container filled with
liquid near this equipment (such as a vase or flower
pot) or expose it to dripping, splashing, rain or
moisture.
D3-4-2-1-3_A1_En
WARNING
Before plugging in for the first time, read the following
section carefully.
The voltage of the available power supply differs
according to country or region. Be sure that the
power supply voltage of the area where this unit
will be used meets the required voltage (e.g., 230 V
or 120 V) written on the AC adapter label.
D3-4-2-1-4*_A1_En
WARNING
To prevent a fire hazard, do not place any naked flame
sources (such as a lighted candle) on the equipment.
D3-4-2-1-7a_A1_En
Operating Environment
Operating environment temperature and humidity:
+5 °C to +35 °C (+41 °F to +95 °F); less than 85 %RH
(cooling vents not blocked)
Do not install this unit in a poorly ventilated area, or in
locations exposed to high humidity or direct sunlight (or
strong artificial light) D3-4-2-1-7c*_A1_En
VENTILATION CAUTION
When installing this unit, make sure to leave space
around the unit for ventilation to improve heat radiation
(at least 10 cm at top, 10 cm at rear, and 10 cm at each
side).
WARNING
Slots and openings in the cabinet are provided for
ventilation to ensure reliable operation of the product,
and to protect it from overheating. To prevent fire
hazard, the openings should never be blocked or
covered with items (such as newspapers, table-cloths,
curtains) or by operating the equipment on thick carpet
or a bed.
D3-4-2-1-7b*_A1_En
Radio wave caution
This unit uses a 2.4 GHz radio wave frequency, which is
a band used by other wireless systems (Microwave
ovens and Cordless phones, etc.). In this event noise
appears in your television image, there is the possibility
this unit (including products supported by this unit) is
causing signal interference with the antenna input
connector of your television, video, satellite tuner, etc.
In this event, increase the distance between the
antenna input connector and this unit (including
products supported by this unit).
• Pioneer is not responsible for any malfunction of the
compatible Pioneer product due to communication
error/malfunctions associated with your network
connection and/or your connected equipment.
Please contact your Internet service provider or
network device manufacturer.
• A separate contract with/payment to an Internet
service provider is required to use the Internet.
This product is for general household purposes. Any
failure due to use for other than household purposes
(such as long-term use for business purposes in a
restaurant or use in a car or ship) and which requires
repair will be charged for even during the warranty
period. K041_A1_En
When using this product, confirm the safety
information shown on the bottom of the unit and the
AC adapter label. D3-4-2-2-4_B1_En
X-SMC5_SYXZT8_En.book 2 ページ 2011年7月28日 木曜日 午後3時27分
Page: 2
CAUTION
The STANDBY/ON switch on this unit will not
completely shut off all power from the AC outlet.
Since the power cord serves as the main disconnect
device for the unit, you will need to unplug it from the
AC outlet to shut down all power. Therefore, make
sure the unit has been installed so that the power
cord can be easily unplugged from the AC outlet in
case of an accident. To avoid fire hazard, the power
cord should also be unplugged from the AC outlet
when left unused for a long period of time (for
example, when on vacation). D3-4-2-2-2a*_A1_En
Information for users on collection and disposal of old equipment and used batteries
These symbols on the products, packaging, and/or accompanying documents mean
that used electrical and electronic products and batteries should not be mixed with
general household waste.
For proper treatment, recovery and recycling of old products and used batteries,
please take them to applicable collection points in accordance with your national
legislation.
By disposing of these products and batteries correctly, you will help to save valuable
resources and prevent any potential negative effects on human health and the
environment which could otherwise arise from inappropriate waste handling.
For more information about collection and recycling of old products and batteries,
please contact your local municipality, your waste disposal service or the point of sale
where you purchased the items.
These symbols are only valid in the European Union.
For countries outside the European Union:
If you wish to discard these items, please contact your local authorities or dealer and
ask for the correct method of disposal.
K058a_A1_En
Symbol examples
for batteries
Symbol for
equipment
Pb
If the AC plug of this unit does not match the AC
outlet you want to use, the plug must be removed
and appropriate one fitted. Replacement and
mounting of an AC plug on the power supply cord of
this unit should be performed only by qualified
service personnel. If connected to an AC outlet, the
cut-off plug can cause severe electrical shock. Make
sure it is properly disposed of after removal.
The equipment should be disconnected by removing
the mains plug from the wall socket when left unused
for a long period of time (for example, when on
vacation). D3-4-2-2-1a_A1_En
POWER-CORD CAUTION
Handle the power cord by the plug. Do not pull out the
plug by tugging the cord and never touch the power
cord when your hands are wet as this could cause a
short circuit or electric shock. Do not place the unit, a
piece of furniture, etc., on the power cord, or pinch the
cord. Never make a knot in the cord or tie it with other
cords. The power cords should be routed such that they
are not likely to be stepped on. A damaged power cord
can cause a fire or give you an electrical shock. Check
the power cord once in a while. When you find it
damaged, ask your nearest PIONEER authorized
service center or your dealer for a replacement.
S002*_A1_En
AC adapter CAUTION
• Make sure to grasp the body of the AC adapter when
removing it from the power outlet. If you pull the
power cord, it may become damaged which could
lead to fire and/or electrocution.
• Do not attempt to plug in or remove the AC adapter
with wet hands. This may result in electrocution.
• Do not insert the power cord of AC adapter into a
power outlet where the connection remains loose
despite inserting the prongs all the way into the
outlet. Heat may be generated which could lead to
fire. Consult with the retailer or an electrician
regarding replacement of the power outlet.
Store the AC adapter out of the reach of
children and infants.
The AC adapter cord may accidentally wind around the
neck and it may cause suffocation.
CAUTION
This product is a class 1 laser product classified
under the Safety of laser products, IEC 60825-1:2007.
CLASS 1 LASER PRODUCT
D58-5-2-2a_A1_En
X-SMC5_SYXZT8_En.book 3 ページ 2011年7月28日 木曜日 午後3時27分
Page: 3
4
En
Thank you for buying this Pioneer product.
Please read through these operating instructions so that you will know how to operate your model properly. After you have
finished reading the instructions, put them in a safe place for future reference.
Contents
01 Before you start
What’s in the box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Loading the batteries in the remote control. . . . . . . . . . 6
Using the remote control . . . . . . . . . . . . . . . . . . . . . . 6
02 Connections
Connecting using a video cable . . . . . . . . . . . . . . . . . . . 7
Connecting using an HDMI cable . . . . . . . . . . . . . . . . . 7
Connecting to a TV . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Connecting to an AV receiver or amplifier . . . . . . . . 8
Audio signals that can be output from this unit’s
HDMI OUT terminal. . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Connecting the FM antenna . . . . . . . . . . . . . . . . . . . . . . 8
Connecting USB storage devices . . . . . . . . . . . . . . . . . . 8
Connecting to the network through the LAN
interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Connecting using LAN cable . . . . . . . . . . . . . . . . . . . 9
Connecting using wireless LAN. . . . . . . . . . . . . . . . . 9
Plugging in . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
03 Part names and functions
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Top panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Main display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
04 Getting started
05 iPod/iPhone playback
Confirming what iPod/iPhone models are
supported . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Connecting your iPod/iPhone . . . . . . . . . . . . . . . . . . . . 16
Connecting your TV . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Playing your iPod/iPhone . . . . . . . . . . . . . . . . . . . . . . . 17
06 Bluetooth® Audio playback
Music playback using Bluetooth wireless
technology. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Remote control operation . . . . . . . . . . . . . . . . . . . . . 19
About Bluetooth® adapter . . . . . . . . . . . . . . . . . . . . . . 19
Setting the PIN code . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Pairing Bluetooth® adapter and Bluetooth wireless
technology device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Listening to music contents of Bluetooth wireless
technology device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
AIR JAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Radio wave caution . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Scope of operation. . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Radio wave reflections . . . . . . . . . . . . . . . . . . . . . . . 22
Precautions regarding connections to products
supported by this unit . . . . . . . . . . . . . . . . . . . . . . . . . . 22
07 Disc playback
Playing discs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Eject a disc from this unit. . . . . . . . . . . . . . . . . . . . . 23
Playing in the desired order (Programmed Play) . . . . 23
08 USB playback
Playing files stored on USB storage devices . . . . . . . . 24
09 Internet radio
Listening to the Internet radio. . . . . . . . . . . . . . . . . . . . 25
Connecting to a LAN network . . . . . . . . . . . . . . . . . 25
Listening to the Internet radio for the first time . . . 25
Tune into a station. . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Adding the stations to the Favorites. . . . . . . . . . . . . . . 26
To delete the stations from the list. . . . . . . . . . . . . . 26
Advanced operations for the Internet radio. . . . . . . . . 26
Registering broadcast stations not on the vTuner list
from the special Pioneer site . . . . . . . . . . . . . . . . . . 26
10 Music server
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
About playable DLNA network devices . . . . . . . . . . 27
Using AirPlay on iPod touch, iPhone, iPad and
iTunes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
About the DHCP server function . . . . . . . . . . . . . . . 27
Authorizing this unit . . . . . . . . . . . . . . . . . . . . . . . . . 28
Playing audio files stored on PCs or other
components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Connecting to the LAN network. . . . . . . . . . . . . . . . 28
Playback with Music Server . . . . . . . . . . . . . . . . . . . 28
11 Using the tuner
Listening to the FM radio broadcasts. . . . . . . . . . . . . . 29
Saving stations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Listening to station presets . . . . . . . . . . . . . . . . . . . . . . 29
12 Other connections
Connecting auxiliary components . . . . . . . . . . . . . . . . 30
Listening to auxiliary components . . . . . . . . . . . . . . . . 30
X-SMC5_SYXZT8_En.book 4 ページ 2011年7月28日 木曜日 午後3時27分
Page: 4
5
En
English
Français
Español
13 Changing the settings
Initial settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Settings for DVD/CD playback . . . . . . . . . . . . . . . . . . . .33
Closing the HOME MENU screen . . . . . . . . . . . . . . .33
Audio Settings parameters . . . . . . . . . . . . . . . . . . . .33
Video Adjust parameters . . . . . . . . . . . . . . . . . . . . . .33
Initial Settings parameters. . . . . . . . . . . . . . . . . . . . .33
Setting the HDMI Resolution settings back to their
defaults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Using the timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Setting the clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Setting the wake-up timer . . . . . . . . . . . . . . . . . . . . .35
Turning on/off the wake-up timer . . . . . . . . . . . . . . .35
Using the wake-up timer . . . . . . . . . . . . . . . . . . . . . .35
Using the sleep timer . . . . . . . . . . . . . . . . . . . . . . . . .35
Network setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Wired Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Wireless Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
WPS connection setting . . . . . . . . . . . . . . . . . . . . . . . . .38
Connecting using PIN Input . . . . . . . . . . . . . . . . . . .38
Friendly Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Parental lock setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Turn on/off the parental lock . . . . . . . . . . . . . . . . . . .39
Changing the password . . . . . . . . . . . . . . . . . . . . . . .39
Software Update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Software Update messages . . . . . . . . . . . . . . . . . . . .39
Sound settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Using the Virtual Surround/Sound Retriever . . . . . .40
Adjusting the bass and treble . . . . . . . . . . . . . . . . . .40
Resetting the system. . . . . . . . . . . . . . . . . . . . . . . . . . . .40
14 Playable discs and files on discs or USB
storage devices
Playable discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Discs that cannot be played . . . . . . . . . . . . . . . . . . .41
About region numbers . . . . . . . . . . . . . . . . . . . . . . . .41
Regarding copy protected CDs . . . . . . . . . . . . . . . . .42
About playing DualDiscs . . . . . . . . . . . . . . . . . . . . . .42
Playing discs created on computers or BD/DVD
recorders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Playable files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Supported video file formats . . . . . . . . . . . . . . . . . . .42
Displaying external subtitle files . . . . . . . . . . . . . . . .42
Supported image file formats . . . . . . . . . . . . . . . . . .42
Supported audio file formats . . . . . . . . . . . . . . . . . . .43
15 Additional information
Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Language Code Table and Country/Area Code
Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Setting the TV system . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Cautions on use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Handling discs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
About network playback . . . . . . . . . . . . . . . . . . . . . . . . . 52
About iPod/iPhone . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
About Wi-Fi® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
• Illustrations featured in the Operating Instructions may
have been modified or simplified for ease of explanation,
and may therefore differ from the actual product
appearance.
X-SMC5_SYXZT8_En.book 5 ページ 2011年7月28日 木曜日 午後3時27分
Page: 5
Before you start
01
6
En
Chapter 1:
Before you start
What’s in the box
Please confirm that the following accessories are in the box
when you open it.
• Remote control
• Power cord
• AC adapter
• Video cable
• FM wire antenna
• AAA batteries (R03) x 2
• Warranty card
• Operating instructions (this document)
Loading the batteries in the remote
control
1 Open the rear lid and load the batteries as
illustrated below.
2 Close the rear lid.
The batteries included with the unit have been provided to
allow you check product operation and may not last long. We
recommend using alkaline batteries that have a longer life.
Caution
• When inserting the batteries, make sure not to damage
the springs on the battery’s  terminals.
• Do not use any batteries other than the ones specified.
Also, do not use a new battery together with an old one.
• When loading the batteries into the remote control, set
them in the proper direction, as indicated by the polarity
marks ( and ).
• Do not heat batteries, disassemble them, or throw them
into flames or water.
• Batteries may have different voltages, even if they are the
same size and shape. Do not use different types of
batteries together.
• To prevent leakage of battery fluid, remove the batteries
if you do not plan to use the remote control for a long
period of time (1 month or more). If the fluid should leak,
wipe it carefully off the inside of the case, then insert new
batteries. If a battery should leak and the fluid should get
on your skin, flush it off with large quantities of water.
• When disposing of used batteries, please comply with
governmental regulations or environmental public
institution’s rules that apply in your country/area.
• WARNING
Do not use or store batteries in direct sunlight or other
excessively hot place, such as inside a car or near a
heater. This can cause batteries to leak, overheat,
explode or catch fire. It can also reduce the life or
performance of batteries.
Using the remote control
The remote has a range of about 7 m at an angle of about 30º
from the remote sensor.
Keep in mind the following when using the remote control:
• Make sure that there are no obstacles between the
remote and the remote sensor on the unit.
• Remote operation may become unreliable if strong
sunlight or fluorescent light is shining on the unit’s
remote sensor.
• Remote controllers for different devices can interfere
with each other. Avoid using remotes for other
equipment located close to this unit.
• Replace the batteries when you notice a fall off in the
operating range of the remote.
30°
7 m
30°
X-SMC5_SYXZT8_En.book 6 ページ 2011年7月28日 木曜日 午後3時27分
Page: 6
Connections 02
7
En
English
Français
Español
Chapter 2:
Connections
• Be sure to turn off the power and unplug the power cord
from the power outlet whenever making or changing
connections.
• Connect the power cord after all the connections
between devices have been completed.
Connecting using a video cable
• When an iPod/iPhone is connected to this unit, the TV
output setting of iPod/iPhone is automatically set to
‘ON’.1
• Do not connect the unit through a VCR. Video signals fed
through VCRs may be affected by copyright protection
systems and the picture will be distorted on the
television.
Connecting using an HDMI cable
By using an HDMI cable, digital signals can be transferred to
an HDMI-compatible TV on a single cable with no loss of
picture or sound quality.2
After connecting, adjust unit
resolution and HDMI color settings according to the HDMI-
compatible TV. Also refer to the operating instructions with
the HDMI-compatible TV.
HDMI, the HDMI Logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of HDMI
Licensing, LLC in the United States and other countries.
Connecting to a TV
• If you connect this unit to your television with the HDMI
cable, sound can not be transferred from your television
to this unit. To listen to sound, connect the front panel
AUX IN mini-plug jack to your television.
Note
1 • Some iPod allow the TV output setting to be changed while connected.
• When the iPod/iPhone is disconnected from this unit, the iPod/iPhone’s TV output setting returns to its original state.
2 • The HDMI OUT terminal does not output any audio signals except DVD/CD sound.
• When playing a disc content, this unit can transfer digital signals by the HDMI OUT terminal. Use the video cable for playing other
content.
• This unit’s interface is designed based on the High-Definition Multimedia Interface specification.
• When an HDMI-compatible device is connected, the resolution is displayed on the front panel display.
• The resolution of video signals output from this unit’s HDMI OUT terminal is changed manually. Change the HDMI Resolution setting
(page 34). Settings for two units can be stored in memory.
• This unit is designed for connection to HDMI-compatible devices. It may not operate properly if connected to DVI devices.
ANTENNA
VIDEO
OUT
DC IN
19 V
FM75 LAN
(10/100)
Yellow
TV
Video cable
(supplied)
To video input
terminals
This unit’s rear panel
ANTENNA
VIDEO
OUT
DC IN
19 V
FM75
HDMI
OUT
LAN
(10/100)
Match the direction of
the plug to the
terminal and insert
straight.
To HDMI input
terminal
HDMI cable
(commercially
available)
TV
This unit’s rear panel
X-SMC5_SYXZT8_En.book 7 ページ 2011年7月28日 木曜日 午後3時27分
Page: 7
Connections
02
8
En
Connecting to an AV receiver or amplifier
Audio signals that can be output from this
unit’s HDMI OUT terminal
• 44.1 kHz to 96 kHz, 16-bit/ 20-bit/ 24-bit 2-channel linear
PCM audio (including 2-channel downmixing)
• Dolby Digital 5.1-channel audio
• DTS 5.1-channel audio
• MPEG audio
• Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of
Dolby Laboratories.
Connecting the FM antenna
Connect the FM antenna plug onto the center pin of the FM
antenna socket.1
Connecting USB storage devices
Connecting to the network through the
LAN interface
By connecting this unit to the network via the LAN interface,
you can play back audio files stored on components on the
network, including your PC, and listen to Internet radio
stations.2
Connect the LAN terminal on this unit to the LAN terminal on
your router (with or without the built-in DHCP server function)
with a straight LAN cable (CAT 5 or higher). Also wireless
connection to the network is possible.
Turn on the DHCP server function of your router. If your router
does not have a built-in DHCP server function, you have to set
up the network manually. For details, see page 36.
ANTENNA
VIDEO
OUT
DC IN
19 V
FM75
HDMI
OUT
LAN
(10/100)
Match the direction of
the plug to the
terminal and insert
straight.
To HDMI input
terminal
HDMI cable
(commercially
available)
TV
This unit’s rear panel
To HDMI input
terminal
From HDMI
output terminal
AV receiver or
amplifier
HDMI cable
(commercially
available)
Note
1 To ensure optimum reception, make sure the FM antenna is fully extended and not coiled or hanging at the rear of the unit.
2 • To use services such as Internet radio or automatic clock sync functions, you must conclude a contract with an Internet service
provider.
• Photo or video files cannot be played back.
• With Windows Media Player 11 or 12, you can even play back copyrighted audio files on this unit.
ANTENNA
LAN
(10/100)
VIDEO
OUT
DC IN
19 V
FM75
FM wire antenna (supplied)
This unit’s rear panel
USB storage device
(commercially available)
This unit’s front panel
X-SMC5_SYXZT8_En.book 8 ページ 2011年7月28日 木曜日 午後3時27分
Page: 8
Connections 02
9
En
English
Français
Español
Connecting using LAN cable
Connecting using wireless LAN
Plugging in
Important
• Before making or changing the connections, switch off
the power and disconnect the power cord from the AC
outlet.
After you’ve finished making all connections, plug the unit
into an AC outlet.
1 Plug the supplied AC adapter into the DC IN
socket on the back of the unit.
2 Plug the supplied power cord into the AC
adapter then plug the other end into an AC
outlet.
ANTENNA
LAN
(10/100)
VIDEO
OUT
DC IN
19 V
FM75
WAN
3 2 1
LAN
Internet
Modem
Router
PC2
PC1
This unit’s rear panel
LAN cable
(commercially
available)
WAN
3 2 1
LAN
Internet
This unit
Router
PC
Modem
ANTENNA
LAN
(10/100)
VIDEO
OUT
DC IN
19 V
FM75
To AC outlet
AC adapter
(supplied)
This unit’s rear panel
Power cord (supplied)
X-SMC5_SYXZT8_En.book 9 ページ 2011年7月28日 木曜日 午後3時27分
Page: 9
Part names and functions
03
10
En
Chapter 3:
Part names and functions
Remote control
1 STANDBY/ON
Press to turn the power on and off.
2 Number buttons (0 to 9)
Use these to specify and play the folder, track or file you
want to view/listen to. Also use them to select the station
preset when using the tuner, etc.
AUDIO*
For discs or files including multiple audio streams/
channels, the audio stream/ channel can be switched
during playback. For files stored in iPod/iPhone, this
button is not available.
SUBTITLE*
On DVD-Video or DivX discs containing subtitles in
multiple languages, the subtitle can be switched during
playback.
ANGLE*
On DVD-Video discs containing multiple angles, the
angle can be switched during playback.
3 SET UP
Use this to change initial settings of the unit. (page 31)
4 MENU
• Press to display the menu screen or Disc Navigator.
• Select and play the title, chapter, track or file from the
Disc Navigator.
Ex.: DVD-Video Disc Navigator
STANDBY/ON
4
5
12
13
1
2
6
15
3
7
8
9
24
25
26
27
28
01
04
02
05
03
06
Disc Navigator:Title
01- 49: ––
X-SMC5_SYXZT8_En.book 10 ページ 2011年7月28日 木曜日 午後3時27分
Page: 10
Part names and functions 03
11
En
English
Français
Español
5 ///
Use these to select items, change settings and move the
cursor.
ENTER
Use this to implement the selected item or enter a
setting that you have changed.
PRESET +/–
Use these to select station presets.
TUNE +/–
Change the frequency one step at a time. To search for
stations automatically, press and hold for about a few
second.
6 SOUND
Turns Virtual Surround and Sound Retriever on and off
(page 40). Also use to adjust the Bass and Treble.
7 FUNCTION /
Use to change the input source. The source changes as
below.
iPod  BT Audio  Air Jam DVD/CD USB  FM
 Internet Radio  Music Server  AUX  Return to
the beginning (Undisplayed)
8  PLAY
Press to start playback.
9 //
• Press during playback to fast-reverse.
• Press in the pause mode to move backward frame-by-
frame. (DVD-Video or DVD VR discs only)
• Press and hold in the pause mode for slow play in the
reverse direction. (DVD-Video or DVD VR discs only)
10  STOP
Press to stop playback.
11  PREV
Press to return to the beginning of the currently playing track
or file. Press twice to move back to the beginning of the
previous track or file.
12 SHIFT
Press to access the ‘boxed’ commands (above the buttons)
on the remote. These buttons are marked with an asterisk (*)
in this section.
13 HOME MENU
When selecting a DVD/CD input, press to display/ hide the
HOME MENU. When selecting another input, this button is
not available.
• Audio Settings (page 33)
• Video Adjust (page 33)
• Play Mode
The Play Mode function may not work for some discs or
files.
A-B Repeat
The specified section within a single title or track is
played repeatedly.
Repeat
Plays titles, chapters, tracks or files repeatedly.
Random
Plays titles, chapters or tracks in random order.
Program (page 23)
Plays titles, chapters, tracks or files in the order in which
you program them.
Search Mode
Plays the specified number or time within the title,
chapter, track or file.
• Disc Navigator (MENU on page 10)
• Initial Settings (page 33)
14 DISP OFF
Press to turn the main display off when you do not need it.
15 SLEEP
Use to put the unit in the sleep mode and select the amount
of time before sleep (page 35).
16
Use to turn on and off the timer.
17 CLEAR
Press to clear the selected item.
Use this for example if you input the wrong number.
Audio Settings
Play Mode Disc Navigator
Initial Settings
Video Adjust
HOME MENU
DVD
A-B Repeat
Repeat
Random
Program
Search Mode
A(Start Point)
B(End Point)
Off
Play Mode
X-SMC5_SYXZT8_En.book 11 ページ 2011年7月28日 木曜日 午後3時27分
Page: 11
Part names and functions
03
12
En
18 RETURN
When currently on the main unit’s setting menu, disc menu,
or Disc Navigator menu, pressing this button returns you to
the preceding menu.
19 MUTE
Press to temporarily silence the sound.
20 SHUFFLE
Perform shuffle play of tracks on the selected iPod/iPhone,
DVD/CD, USB storage device or Music Server.
21 VOLUME +/–
Use to set the listening volume. (Default setting: 10)
22 REPEAT
Perform repeat play of tracks on the selected iPod/iPhone,
DVD/CD, USB storage device or Music Server.
23 / /
• Press during playback to fast-forward.
• Press in the pause mode to move forward frame-by-
frame. (DVD-Video, DVD VR, Video CD or DivX discs only)
• Press and hold in the pause mode for slow play in the
forward direction. (DVD-Video, DVD VR, Video CD or
DivX discs only)
24  PAUSE
Press to stop playback temporarily. Press again to resume.
25 ZOOM
Use to zoom in/out on image during DVD/CD playback. For
images stored in iPod/iPhone, this button is not available.
26  NEXT
Press during playback to skip ahead to the beginning of the
next track or file.
27 DISPLAY
Press during DVD/CD playback to display elapsed time,
remaining time, etc., on television screen. No display appears
when any input other than DVD/CD is selected.
28 TOP MENU
Press to display the top menu of the DVD-Video.
Top panel
1 Disc slot
2  EJECT
Eject the disc. Automatically switches to DVD/CD input.
3  STANDBY/ON
Press to turn the power on and off.
4 FUNCTION
Use to change the input source. The source changes as
below.
iPod  BT Audio  Air Jam  DVD/CD  USB  FM 
Internet Radio  Music Server  AUX  Return to the
beginning (Undisplayed)
5 BT AUDIO
Switches the input source to BT Audio.
6 AIR JAM
Switches the input source to Air Jam.
7 
Press to start playback. During playback, pause/unpause
playback.
8 
Press to stop playback.
9 VOLUME –/+
Use to set the listening volume. (Default setting: 10)
3 6 7 8 9
7
2
1
4 5
X-SMC5_SYXZT8_En.book 12 ページ 2011年7月28日 木曜日 午後3時27分
Page: 12
Part names and functions 03
13
En
English
Français
Español
Front panel
1 POWER ON
When the power is on, this indicator lights.
BT AUDIO
When BT Audio is selected as the input source, this
indicator lights.
AIR JAM
When Air Jam is selected as the input source, this
indicator lights.
TIMER
When the wake-up timer is set to On, this indicator
lights.
TUNE
When the tuner receives FM broadcasts, the TUNE
indicator lights.
HDMI
When this unit is recognized by another HDMI
compatible component, this indicator lights.
2 Main Display
3 Sub Display
4 Speaker units
5 USB port
6 AUX IN
Use to connect auxiliary components.
7 PHONES
Use to connect headphones.
8 iPod/iPhone connector port
4
4
3
5 6 7 7
8
2
1
X-SMC5_SYXZT8_En.book 13 ページ 2011年7月28日 木曜日 午後3時27分
Page: 13
Part names and functions
03
14
En
Main display
1 Input source
2 Sleep timer
When the sleep timer is set, the remaining time until power
off is displayed.
3 AirPlay
This appears in blue during AirPlay operation, and in white
during stop mode.
4 Network connection status
When the unit is connected to the wired network, this
indicator lights.
When the unit is connected to the wireless network, this
indicator lights.1
When the unit is not connected to the network, this
indicator lights.
5 Name of file/track/artist/album/station,
etc.
6 Mute
Displayed during mute operation.
7 Play status
8 Artwork
Displayed when the currently playing file includes an album
jacket image, etc.
9 Repeat and Shuffle
Repeat all files.
Repeat a file.
Shuffle
10 Elapsed playing time
11 Play bar
The bar becomes longer together with the elapsed playback
time.
12 Remaining playing time
Song
Artist
Album
1 4
5 7
8
7
9
6
7
2 3
10 11 12
Note
1 This does not indicate the strength of the received signal; the number of bars does not change.
X-SMC5_SYXZT8_En.book 14 ページ 2011年7月28日 木曜日 午後3時27分
Page: 14
Getting started 04
15
En
English
Français
Español
Chapter 4:
Getting started
When you use the unit for the first time, the following screens
will be displayed.
Set up the following items to customize the unit.
1 Press STANDBY/ON.
About twenty seconds after turning on the power, the
following splash screen appears. About one minute is
required between turning the power on and completion of
startup.
Setting Quick Start Mode to On will allow faster startup
(page 32).
2 Cancel Demo Mode (Set to normal mode).
The screen below will automatically appear after the screen in
step 1. If the  STOP is pressed, the operation will proceed to
step 3.
• Press  PLAY button to start the Demo Mode. When
starting up the next time, it will be necessary to set step
3.
• When Demo Mode is selected, the Quick Start Mode
is simultaneously set to On.
• The Demo Mode and Quick Start Mode settings can
also be changed manually in the Option Settings (see
page 32). When Demo Mode is set in step 2, if the
Option Settings menu is subsequently used to cancel
the Demo Mode, the Quick Start Mode will not be
cancelled simultaneously. The two settings must be
changed independently.
3 Use / to select the menu language of
this unit, then press ENTER.
• This setting has no effect on the home menu, screen
display, or the language selected for DVD audio or
subtitles. To change those items, consult the
instructions on page 34.
The setting is done.
Select "Start" to start
Demo mode; otherwise
"Cancel".
[PLAY] Start
[STOP] Cancel
Language
Français
Deutsch
Nederlands
English
X-SMC5_SYXZT8_En.book 15 ページ 2011年7月28日 木曜日 午後3時27分
Page: 15
iPod/iPhone playback
05
16
En
Chapter 5:
iPod/iPhone playback
Merely by connecting your iPod/iPhone to this unit, you can
enjoy high-quality sound from your iPod/iPhone. This unit can
also be connected to a television set, letting you view images
from your iPod/iPhone.
Playback and volume level setting for iPod/iPhone music and
images can be performed from this unit or the iPod/iPhone
itself.
Confirming what iPod/iPhone models are
supported
The iPod/iPhone playable on this unit are shown below.1
* The iPod nano 6G cannot play back video, but can play slide
shows only.
• This system has been developed and tested for the
software version of iPod/iPhone indicated on the website
of Pioneer (http://pioneer.jp/homeav/support/ios/
eu/).
• Installing software versions other than indicated on the
website of Pioneer to your iPod/iPhone may result in
incompatibility with this system.
1 Select “Settings” from the top menu.
When using iPod touch or iPhone, select “General” after
selecting “Settings”.
2 Select “About”.
The software version will be displayed.
Tip
• When using an iPod/iPhone not supported by this unit,
use a commercially available cable to connect the iPod/
iPhone to the AUX IN connector of this unit.
Connecting your iPod/iPhone
Caution
• When connecting iPod/iPhone units, always use the
dock adapter provided with iPod/iPhone units, or a
commercially available adapter designed to support
iPod/iPhone. The iPod/iPhone cannot be connected
without a dock adapter; attempting to connect an iPod/
iPhone without it will cause damage or malfunction.
• An iPod/iPhone universal dock adapter is not supplied
with this unit.
1 Open the iPod/iPhone connector port.2
2 Attach the dock adapter to iPod/iPhone
connector port.
When attaching the dock adapter, be sure to orient the front-
back directions of the dock adapter correctly. To attach, first
place the protruding tabs on the front side of the adapter into
the depressions on the iPod/iPhone connector port and press
into position. When attaching the adapter, be careful not to
strike the connectors.
iPod/iPhone Audio Control Video
iPod nano 2G   —
iPod nano 3/4/5/6G   *
iPod classic   
iPod touch 1/2/3/4G   
iPhone   
iPhone 3G/3GS   
iPhone 4   
Note
1 • Pioneer does not guarantee that this unit plays iPod/iPhone models other than the ones specified.
• Some functions may be restricted depending on the model or software version.
• iPod/iPhone is licensed for reproduction of non-copyrighted materials or materials the user is legally permitted to reproduce.
• Features such as the equalizer cannot be controlled using this system, and we recommend switching the equalizer off before
connecting.
• Pioneer cannot under any circumstances accept responsibility for any direct or indirect loss arising from any inconvenience or loss of
recorded material resulting from iPod/iPhone failure.
• For detailed instructions on using the iPod/iPhone, please refer to the manual supplied with the iPod/iPhone.
2 When opening or closing the iPod/iPhone connector port, support the top of the unit with your hand to prevent it from moving.
Push
X-SMC5_SYXZT8_En.book 16 ページ 2011年7月28日 木曜日 午後3時27分
Page: 16
iPod/iPhone playback 05
17
En
English
Français
Español
3 Connect your iPod/iPhone.
• When your iPod/iPhone is not connected to the unit,
close the iPod/iPhone connector port firmly.
Connecting your TV
To watch iPod/iPhone images on a television, connect it using
a composite video cable.
• When an iPod/iPhone is connected to this unit, the TV
output setting of the iPod/iPhone is automatically set to
‘ON’.1
Playing your iPod/iPhone
Caution
• When your iPod/iPhone is connected to this unit and
you wish to operate the iPod/iPhone directly, be sure to
hold the iPod/iPhone steady with the other hand to
prevent malfunctions due to faulty contacts.
1 Connect your iPod/iPhone.
• To connect your iPod/iPhone, see Connecting your iPod/
iPhone on page 16.
2 Press FUNCTION / to select iPod as the
input source.
iPod is shown on the main display and starts playback.
The following operations are possible for iPod/iPhone.
* Each time you press REPEAT the repeat modes changes as
below.2
Repeat 1  Repeat all  Normal playback
Repeat 1: Repeats a file currently played back.
Repeat all: Repeats all files.
When no device is connected to the iPod/iPhone connector
port and this unit is not operated for 30 minutes or more,
power will automatically turn off.3
Note
1 • Some iPod allow the TV output setting to be changed while connected.
• When the iPod/iPhone is disconnected from this unit, the iPod/iPhone’s TV output setting returns to its original state.
MENU



3
2
Push
Button What it does
 PLAY Starts normal playback.
 PAUSE Pauses playback.
 STOP Pauses playback.
 PREV Press to skip to the start of the current file, then
previous files.
 NEXT Press to skip to the next file.
 Press and hold to start fast reverse scanning.
 Press and hold to start fast forward scanning.
SHUFFLE The currently selected iPod/iPhone tracks are
played back in random order (shuffle play).
REPEAT The currently selected iPod/iPhone tracks are
played back repeatedly.*
MENU Use to access the iPod/iPhone menu.
//ENTER Use to control the iPod/iPhone menu.
2 No icon will be displayed on the main display when the iPod/iPhone is in the repeat mode or shuffle mode.
3 Only when Power Save mode is selected in Auto mode select (page 32).
X-SMC5_SYXZT8_En.book 17 ページ 2011年7月28日 木曜日 午後3時27分
Page: 17
iPod/iPhone playback
05
18
En
Important
If this unit cannot play your iPod/iPhone, perform the
following troubleshooting checks:
• Check whether the iPod/iPhone is supported by this unit.
• Reconnect the iPod/iPhone to the unit. If this doesn’t
seem to work, try resetting your iPod/iPhone.
• Check the iPod/iPhone software is supported by this
unit.
If the iPod/iPhone cannot be operated, check the following
items:
• Is the iPod/iPhone connected correctly? Reconnect the
iPod/iPhone to the unit.
• Is the iPod/iPhone experiencing a hangup? Try resetting
the iPod/iPhone, and reconnect it to the unit.
Tip
• iPod/iPhone recharging occurs whenever an iPod/
iPhone is connected to this unit. (This function is
supported in standby mode as well.)
• When input is switched from iPod to another function,
iPod/iPhone playback is temporarily stopped.
X-SMC5_SYXZT8_En.book 18 ページ 2011年7月28日 木曜日 午後3時27分
Page: 18
Bluetooth®
Audio playback 06
19
En
English
Français
Español
Chapter 6:
Bluetooth®
Audio playback
Music playback using Bluetooth wireless
technology
This unit is furnished with a Bluetooth®
adapter (Pioneer
Model No.AS-BT200). A product equipped with Bluetooth
wireless technology (portable cell phone, digital music player,
etc.) can be used to listen to music wirelessly.1
Also, by using
a commercially available transmitter supporting Bluetooth
wireless technology, you can listen to music on a device not
equipped with Bluetooth wireless technology. The AS-BT200
model supports SCMS-T contents protection, so music can
also be enjoyed on devices equipped with SCMS-T type
Bluetooth wireless technology.
Remote control operation
The remote control supplied with this unit allows you to play
and stop media, and perform other operations.2
About Bluetooth®
adapter
Located in the position shown in the accompanying
illustration. Do not remove.
Remote control operation
This unit
Device not equipped with Bluetooth
wireless technology:
Digital music player
+
Bluetooth® audio transmitter
(commercially available)
Bluetooth wireless technology
enabled device:
Digital music player
Bluetooth wireless technology
enabled device:
Cell phone
Note
1 • The Bluetooth wireless technology enabled device must support A2DP profiles.
• Pioneer does not guarantee proper connection and operation of this unit with all Bluetooth wireless technology enabled devices.
• The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by PIONEER
CORPORATION is under license. Other trademarks and trade names are those of their respective owners.
2 • The Bluetooth wireless technology enabled device must support AVRCP profiles.
• Remote control operations cannot be guaranteed for all Bluetooth wireless technology enabled devices.
Bluetooth®
adapter
This unit’s
rear panel
Cover
X-SMC5_SYXZT8_En.book 19 ページ 2011年7月28日 木曜日 午後3時27分
Page: 19
Bluetooth® Audio playback
06
20
En
Setting the PIN code
Set this unit’s PIN code to the same setting as that for the
Bluetooth wireless technology device used. Supported PIN
code setting values include 0000, 1234 or 8888.
• Default setting: 0000
1 Press FUNCTION / or BT AUDIO on the
top panel of the unit to select BT Audio as the
input source.
The BT AUDIO indicator lights and BT Audio is shown on the
main display.
2 Press SET UP.
3 Use / to select Option Setting  BT PIN
Select, then press ENTER.
4 Use / to select the PIN code, then press
ENTER.
The PIN code is stored.
Pairing Bluetooth® adapter and
Bluetooth wireless technology device
“Pairing” must be done before you start playback of Bluetooth
wireless technology content using Bluetooth®
adapter. Make
sure to pair devices the first time you operate the system or
any time pairing data is cleared. “Pairing” is the step
necessary to register Bluetooth wireless technology device to
enable Bluetooth communications.1
For more details, see
also the operating instructions of your Bluetooth wireless
technology device.
1 Press FUNCTION / or BT AUDIO on the
top panel of the unit to select BT Audio as the
input source.
The BT AUDIO indicator lights and BT Audio is shown on the
main display.
2 Turn on the Bluetooth wireless technology
device that you want to pair, place it near the
system and set it into pairing mode.
Pairing starts.
3 Check to see that the Bluetooth®
adapter is
detected by the Bluetooth wireless technology
device.
• If the Bluetooth wireless technology device cannot be
connected to the unit, perform the connection operation
from the Bluetooth wireless technology device.
Listening to music contents of Bluetooth
wireless technology device
1 Press FUNCTION / or BT AUDIO on the
top panel of the unit to select BT Audio as the
input source.
The BT AUDIO indicator lights and BT Audio is shown on the
main display.
2 Make connection between the Bluetooth
wireless technology device and the unit.
• See Pairing Bluetooth® adapter and Bluetooth wireless
technology device above.
Option Setting
Volume Limit Setting
Internet Parental Lock
Auto mode select
BT PIN Select
Note
1 • Pairing is required when you first use Bluetooth wireless technology device and Bluetooth®
adapter.
• To enable Bluetooth communication, pairing should be done with both of your system and Bluetooth wireless technology device.
• During pairing, the name of this unit appears as AS-BT200.
X-SMC5_SYXZT8_En.book 20 ページ 2011年7月28日 木曜日 午後3時27分
Page: 20
Bluetooth®
Audio playback 06
21
En
English
Français
Español
3 Press  PLAY to start playback.
The following operations are now possible for Bluetooth
wireless technology devices, using the remote control.1
• When no Bluetooth wireless technology device is
connected and no operation has been done for 30
minutes or more, the power will automatically turn off.2
AIR JAM
Air Jam – a Pioneer-exclusive application and available for
free.
Air Jam lets you connect multi compatible devices to this unit
using Bluetooth wireless technology. With it, you can make a
group playlist directly on a supported device to play in your
home theater through the unit. You and your friends can add
songs from your devices to the playlist. Also Air Jam lets you
delete the song before anyone has to hear it.
1 Press FUNCTION / or AIR JAM on the top
panel of the unit to select Air Jam as the input
source.
The AIR JAM indicator lights and Air Jam is shown on the
main display.
For more details on using Air Jam, access our website.
http://pioneer.jp/product/soft/iapp_airjam/en.html
Radio wave caution
This unit uses a 2.4 GHz radio wave frequency, which is a
band used by other wireless systems (see list below). To
prevent noise or interrupted communication, do not use this
unit nearby such devices, or make sure these devices are
switched off during use.
• Cordless phones
• Cordless facsimiles
• Microwave ovens
• Wireless LAN devices (IEEE802.11b/g)
• Wireless AV equipment
• Wireless controllers for game systems
• Microwave-based health aids
• Some baby monitors
Other, less common, equipment that may operate on the
same frequency:
• Anti-theft systems
• Amateur radio stations (HAM)
• Warehouse logistic management systems
• Discrimination systems for train or emergency vehicles
Note
• In the event noise appears in your television image, there
is the possibility that a Bluetooth wireless technology
enabled device or this unit (including products
supported by this unit) are causing signal interference
with the antenna input connector of your television,
video, satellite tuner, etc. In this event, increase the
distance between the antenna input connector and the
Bluetooth wireless technology enabled device or this
unit (including products supported by this unit).
• If there is something obstructing the path between this
unit (including devices supported by this unit) and the
device equipped with Bluetooth wireless technology
(such as a metal door, concrete wall, or insulation
containing tinfoil), you may need to change the location
of your system to prevent signal noise and interruptions.
Button What it does
 PLAY Starts normal playback.
 PAUSE Pauses playback.
 STOP Stops playback.
 PREV Press to skip to the start of the current file, then
previous files.
 NEXT Press to skip to the next file.
 Press and hold to start fast reverse scanning.*
* This function may work differently depending on the connected
device.
 Press and hold to start fast forward scanning.*
Note
1 • The Bluetooth wireless technology enabled device must support AVRCP profiles.
• The operation of some Bluetooth wireless technology devices may differ from what is shown in the above table.
2 Only when Power Save mode is selected in Auto mode select (page 32).
X-SMC5_SYXZT8_En.book 21 ページ 2011年7月28日 木曜日 午後3時27分
Page: 21
Bluetooth® Audio playback
06
22
En
Scope of operation
Use of this unit is limited to home use. (Transmission
distances may be reduced depending on communication
environment).
In the following locations, poor condition or inability to receive
radio waves may cause the audio to be interrupted or stopped:
• In reinforced concrete buildings or steel framed or iron-
framed buildings.
• Near large metallic furniture.
• In a crowd of people or near a building or obstacle.
• In a location exposed to the magnetic field, static
electricity or radio wave interference from radio
communication equipment using the same frequency
band (2.4 GHz) as this unit, such as a 2.4 GHz wireless
LAN device (IEEE802.11b/g) or microwave oven.
• If you live in a heavily populated residential area
(apartment, townhouse, etc.) and if your neighbor’s
microwave is placed near your system, you may
experience radio wave interference. If this occurs, move
your unit to a different place. When the microwave is not
in use, there will be no radio wave interference.
Radio wave reflections
The radio waves received by this unit include the radio wave
coming directly from the device equipped with Bluetooth
wireless technology (direct wave) and waves coming from
various directions due to reflections by walls, furniture and
building (reflected waves). The reflected waves (due to
obstacles and reflecting objects) further produce a variety of
reflected waves as well as variation in reception condition
depending on locations. If the audio cannot be received
properly due to this phenomenon, try moving the location of
the device equipped with Bluetooth wireless technology a
little. Also note that audio may be interrupted due to the
reflected waves when a person crosses or approaches the
space between this unit and the device equipped with
Bluetooth wireless technology.
Precautions regarding connections to
products supported by this unit
• Complete connections for all devices supported by this
unit, including all audio cords and power cables before
connecting them to this unit.
• After completing connections to this unit, check the
audio and power cables to confirm that they not twisted
together.
• When disconnecting this unit, confirm that you have
sufficient working space in the surrounding area.
• When changing connections of audio or other cables for
products supported by this unit, confirm that you have
sufficient working space in the surrounding area.
X-SMC5_SYXZT8_En.book 22 ページ 2011年7月28日 木曜日 午後3時27分
Page: 22
Disc playback 07
23
En
English
Français
Español
Chapter 7:
Disc playback
Playing discs
1 Press STANDBY/ON to turn the power on.
The selected input is displayed on the front panel display.
• When playing a DVD-Video or DivX discs, turn the TV on
and switch TV input before starting.
• You can change the screen display language of the unit
(OSD Language on page 34).
2 Press FUNCTION / to select DVD/CD as
the input source.
DVD/CD is shown on the main display.
When a disc has been slotted in the disc slot already, press
 EJECT to eject the disc.
3 Slot a disc.
• By using the number buttons (0 to 9), you can specify
and play the title, chapter, track or file you want to view/
listen to.
• Hold the disc as shown in the illustration, insert it in the
center of the disc slot, and press in gently from above.
• The disc will then be automatically drawn into the slot.
• If the disc does not load smoothly, do not attempt to
force it. Remove it from the slot and try inserting it again.
Attempting to force a disc causes damage or
malfunction.
• Do not touch the recording surface of the disc, since the
disc may not play properly if it has fingerprints or other
soiling.
• 8 cm discs cannot be played. Also do not attempt to use
adapters for 8 cm CD to play such discs, since
malfunction may result.
Eject a disc from this unit
• Press  EJECT on the top panel.
Tip
• When no operation has done in DVD/CD mode for more
than 30 minutes, the power will automatically turn off.
Playing in the desired order
(Programmed Play)
1 Press HOME MENU.
The HOME MENU will be displayed on the television screen.
2 Use / to select Play Mode, then press
ENTER.
The Play Mode screen is displayed.
3 Use / to select Program, then press
ENTER or .
4 Use / to select Create/Edit, then press
ENTER.
The Create/Edit screen differs according to the disc or file.
5 Use /// to select the title, chapter,
track or file, then press ENTER.
• To add to a program, first select the place in the program
(the program step), next select the title, chapter or track,
then press ENTER (files are added at the end of
program).
• Press RETURN to return to the previous screen. If you
return to the previous screen when inputting it, the
settings you have programmed are cleared.
• To delete a step, highlight it and press CLEAR.
6 Press PLAY to start playback.
• To play a program that has already been set, select
Playback Start from the program screen, then press
ENTER.
• To resume normal playback, select Playback Stop from
the program screen, then press ENTER. The program
remains in memory.
• To cancel the entire program, select Program Delete
from the program screen, then press ENTER.
• Programs can be played repeatedly. Select Program
Repeat from Repeat on the Play Mode screen during
programmed playback.
• Programs cannot be played in random order (random
play is not possible during programmed play).
Slot a disc with
the label side
facing front.
Program Step
01.
02.
03.
04.
05.
06.
07.
08.
Title 1-01
Title 01
Program
Chapter 1-015
Chapter 001
Chapter 002
Chapter 003
Chapter 004
Chapter 005
Chapter 006
Chapter 007
Chapter 008
X-SMC5_SYXZT8_En.book 23 ページ 2011年7月28日 木曜日 午後3時27分
Page: 23
USB playback
08
24
En
Chapter 8:
USB playback
Playing files stored on USB storage
devices
• This unit may not recognize a USB storage device, play
files or supply power to a USB storage device. For
details, see When a USB storage device is connected on
page 46.
• Pioneer does not guarantee that any file recorded on a
USB storage device will play or that power will be
supplied to a USB storage device. Also note that Pioneer
will accept no responsibility whatsoever for loss of files
on USB storage devices caused by connection to this
unit.
1 Press FUNCTION / to select USB as the
input source.
USB is shown on the main display.
2 Connect the USB storage device.
The folders/files stored on the connected USB storage device
appear on the main display automatically.
3 Use / to select the file, then press
ENTER.
Playback starts.
• To return to the previous screen, press RETURN.
• When changing to a different input source, stop the USB
memory playback first, before changing.
• Turn the power off before removing the USB storage
device.
You can perform the following operations. Note that some
buttons are not available for operation depending on the
category currently being played back.
When a USB storage device is not playing and the unit has
not been operated for 30 minutes or more, the power will
automatically turn off.1
The following screen appears on the main display when you
play back audio files. Note that some file types may not be
displayed.
Button What it does
 PLAY Unpauses playback. When this is pressed from
the file select menu, the screen for the currently
playing file is displayed.
 PAUSE Pauses playback.
 STOP Stops playback.
 PREV Press to skip to the previous files.
 NEXT Press to skip to the next file.
SHUFFLE The currently selected tracks are played back in
random order (shuffle play).
REPEAT The currently selected tracks are played back
repeatedly.*
* Press repeatedly to switch between repeat play options. ‘ ’
plays the currently playing file repeatedly. ‘ ’ plays all the files
repeatedly.
Note
1 Only when Power Save mode is selected in Auto mode select (page 32).
Song
Artist
Album
X-SMC5_SYXZT8_En.book 24 ページ 2011年7月28日 木曜日 午後3時27分
Page: 24
Internet radio 09
25
En
English
Français
Español
Chapter 9:
Internet radio
Listening to the Internet radio
Connecting to a LAN network
Connect to the network using the LAN interface.
For details on the connections, see Connecting to the network
through the LAN interface on page 8.
Listening to the Internet radio for the first
time
When you listen to the Internet radio first time, follow the
instructions below to tune into your desired station.
1 Press FUNCTION / to select Internet
Radio as the input source.
Internet Radio is shown on the main display.
2 Use / to select Find Net Radio, then press
ENTER.
3 Use / to select the station, then press
ENTER.
Tune into a station
1 Press FUNCTION / to select Internet
Radio as the input source.
• The information of the station you last selected is
displayed on the main display.
2 Press MENU to display the internet radio
menu screen.
3 Use / to select Find Net Radio or
Favorites, then press ENTER.
• Select Find Net Radio when you want to tune into a
station which has not been added to Favorites.
• Select Favorites when you want to tune into a station
which has been added to Favorites already.
• To add stations to the Favorites, see Adding the stations
to the Favorites on page 26.
4 Use / to select the station, then press
ENTER.
• When you select Find Net Radio, you can also select the
available stations from the internet radio menu.
Internet Radio
Find Net Radio
Favorites
Genres
Countries
Podcasts By Genre
Podcasts By Location
X-SMC5_SYXZT8_En.book 25 ページ 2011年7月28日 木曜日 午後3時27分
Page: 25
Internet radio
09
26
En
Adding the stations to the Favorites
1 Tune into the station from Find Net Radio.
• Follow the instructions Tune into a station on page 25.
• The information of the station is displayed on the main
display.
2 Press and hold ENTER for a few seconds.
• A maximum of 20 stations can be stored in Favorites.
To delete the stations from the list
1 Press MENU to display the internet radio
menu screen.
2 Use / to select Favorites, then press
ENTER.
3 Use / to select the station you want to
delete, then press ENTER.
4 Use / to select Delete, then press ENTER.
Select OK to confirm.
• To cancel deleting the station, press RETURN.
Advanced operations for the Internet
radio
Registering broadcast stations not on the
vTuner list from the special Pioneer site
With this unit, broadcast stations not included on the list of
stations distributed by vTuner can be registered and played.
Check the access code required for registration on this unit,
use this access code to access the special Pioneer Internet
radio site and register the desired broadcast stations in your
favorites. The address of the special Pioneer Internet radio
site is:
http://www.radio-pioneer.com
1 Display Find Net Radio screen.
To display the Internet radio list screen, perform steps 1 to 3
at Listening to the Internet radio for the first time on page 25.
2 Use / to select Help, then press ENTER.
3 Use / to select Get access code, then
press ENTER.
The access code required for registration on the special
Pioneer Internet radio site is displayed. Make a memo of this
address.
The following can be checked on the Help screen:
• Get access code - The access code required for
registration on the special Pioneer Internet radio site is
displayed.
• Show Your WebID/PW - After registering on the
special Pioneer Internet radio site, the registered ID and
password are displayed.
• Reset Your WebID/PW - Resets all the information
registered on the special Pioneer Internet radio site.
When reset, all the registered broadcast stations are
also cleared. If you want to listen to the same stations, re-
register after resetting.
4 Access the special Pioneer Internet radio site
from your computer and perform the
registration process.
Access the above site and use the access code in step 3 to
perform user registration, following the instructions on the
screen.
5 Register the desired broadcast stations as
your favorites, following the instructions on the
computer’s screen.
Both broadcast stations not on the vTuner list and stations on
the vTuner list can be registered. In this case they are
registered on the unit as favorite broadcast stations and can
be played.
1. FM AAAAA
[ENTER] (Press and hold):
Add to Favorites
X-SMC5_SYXZT8_En.book 26 ページ 2011年7月28日 木曜日 午後3時27分
Page: 26
Music server 10
27
En
English
Français
Español
Chapter 10:
Music server
This unit can play audio files stored on PCs or other
components on a Local Area Network (LAN).
Introduction
This unit allows you to listen to audio files on a computer or
other component connected to the unit via LAN interface.
This chapter describes the setup and playback procedures
required to enjoy these features. It is advisory that you also
refer to the operation manual supplied with your network
component.
• Photo or video files cannot be played back.
• With Windows Media Player 11 or Windows Media
Player 12, you can even play back copyrighted audio files
on this unit.
About playable DLNA network devices
This unit allows you to play music on media servers
connected on an identical Local Area Network (LAN) as the
unit. This unit allows you to play files stored on the following
devices:
• PCs running Microsoft Windows Vista or XP with
Windows Media Player 11 installed
• PCs running Microsoft Windows 7 with Windows Media
Player 12 installed
• DLNA-compatible digital media servers (on PCs or other
components)
Files stored in a PC or DMS (Digital Media Server) as
described above can be played via command from an external
Digital Media Controller (DMC). Devices controlled by this
DMC to play files are called DMRs (Digital Media Renderers).
This unit supports this DMR function.
When this unit is selected as a DMR and DMS playback is
begun, the unit’s input automatically switches to DMR.
During DMR input, the currently playing track name, artist
name, album name, and album art will appear on the unit’s
main display (some information may not be displayed,
depending on the file being played).
When in the DMR mode, such operations as playing and
stopping files can be performed from the external controller.
Volume adjustment and the muting control are also possible.
If the FUNCTION / buttons are pressed during DMR
playback, the DMR playback will stop and the unit will revert
to the input function selected prior to DMR playback.
• Depending on the external controller being used,
playback may be interrupted when the volume is
adjusted from the controller. In this case, adjust the
volume from the unit or remote control.
Using AirPlay on iPod touch, iPhone, iPad and
iTunes
This unit supports AirPlay audio streaming from iPod touch
(2nd, 3rd and 4th generations), iPhone 4, iPhone 3GS, iPad
with iOS 4.2 or later, and iTunes 10.1 (Mac and PC) or later.
To use AirPlay, select your unit on your iPod touch, iPhone,
iPad or in iTunes and start playback.1
Input to the unit will switch automatically when AirPlay is in
use.
The following operations can be performed when in AirPlay
mode:
• Adjustment of the unit’s volume from iPod touch,
iPhone, iPad or iTunes.
• Pause/resume, next/previous track, and shuffle/repeat
from the remote control of the unit.2
• Display of the currently playing track information on the
unit’s main display, including artist, song/album name
and album artwork.3
• If the FUNCTION / buttons are pressed during
AirPlay playback, the AirPlay playback will stop and the
unit will revert to the input function selected prior to
AirPlay.
Tip
• A network environment is required to use AirPlay.
• The unit’s name that shows up in the AirPlay UI on iPod
touch, iPhone, iPad and iTunes can be changed by
Friendly Name from Network Setting.
• AirPlay provided on this unit has been developed and
tested based on the software versions for the iPod touch,
iPhone, iPad and the software versions for iTunes that
are indicated on the Pioneer website. AirPlay may not be
compatible with iPod touch, iPhone, iPad or iTunes
software versions other than those indicated on the
Pioneer website.
About the DHCP server function
To play back audio files stored on components on the
network, you must turn on the DHCP server function of your
router.
In case your router does not have the built-in DHCP server
function, it is necessary to set up the network manually.
Otherwise, you cannot play back audio files stored on
components on the network or listen to Internet radio
stations. See Network setting on page 36 for more on this.
Note
1 For more information, see the Apple website (http://www.apple.com).
2 The main display will not show the Play Status, Repeat, or Shuffle icons.
3 It may not be displayed other than song name.
X-SMC5_SYXZT8_En.book 27 ページ 2011年7月28日 木曜日 午後3時27分
Page: 27
Music server
10
28
En
Authorizing this unit
This unit must be authorized to enable playback. The unit is
automatically authorized when it is connected to a PC over a
network. If not, please authorize this unit manually on the PC.
The authorization (or permission) method for access varies
depending on the type of server currently being connected.
For more information on authorizing this unit, refer to the
instruction manual of your server.
Playing audio files stored on PCs or other
components
Connecting to the LAN network
Be sure to connect PC or other components to the network
using the LAN interface before you use this function.
For details on the connections, see page 8.
Playback with Music Server
Important
• You cannot access a PC on a network while you are
logged onto a domain that is configured in a Windows
network environment. Instead of logging onto the
domain, log onto the local machine.
• There are cases where the time elapsed may not be
correctly displayed.
1 Press FUNCTION / to select Music Server.
All available servers are shown on the main display.
• When no sever is available to play, “Empty” will be
displayed.
2 Use / to select the server that the file
you want to play is stored on, then press ENTER.
The folders/files stored on the server are shown on the main
display.
3 Use / to select the file you want to play,
then press ENTER.
Playback starts.
• When the file you want to play is in the folder, select the
folder first.
• If you press RETURN during playback, the previous
(folders/files) screen will be displayed.
You can perform the following operations. Note that some
buttons are not available for operation depending on the
category currently being played back.
Song
Artist
Album
Button What it does
 PLAY Unpauses playback. When this is pressed from
the file select menu, the screen for the currently
playing file is displayed.
 PAUSE Pauses playback.
 STOP Stops playback.
 PREV Press to skip to the previous file.
 NEXT Press to skip to the next file.
SHUFFLE The currently selected tracks are played back in
random order (shuffle play).
REPEAT The currently selected tracks are played back
repeatedly.*
* Press repeatedly to switch between repeat play options. ‘ ’
plays the currently playing file repeatedly. ‘ ’ plays all the files
repeatedly.
X-SMC5_SYXZT8_En.book 28 ページ 2011年7月28日 木曜日 午後3時27分
Page: 28
Using the tuner 11
29
En
English
Français
Español
Chapter 11:
Using the tuner
Listening to the FM radio broadcasts
The tuner can receive FM broadcasts, and can save your
favorite stations.
1 Press FUNCTION / to select FM.
The tuned frequency will be displayed on the main display.
2 Tune into a station.
When the tuner receives FM broadcasts, the TUNE indicator
lights.
There are two ways to do this:
Automatic tuning - To search for stations, press and
hold TUNE +/– for about a few seconds. This unit will
start searching for the next station, stopping when it has
found one. Repeat to search for other stations.
Manual tuning - To change the frequency one step at
a time, press TUNE +/–.
Saving stations
You can save up to 9 station presets so that you always have
easy access to your favorite stations without having to tune in
manually each time.1
• Manually saving station presets
1 Press FUNCTION / to select FM.
The tuned frequency will be shown on the main display.
2 Tune into a station.
3 Press and hold a number button (1 to 9) for
a few seconds.
The tuned frequency is preset to the selected number button.
The previous station preset is overwritten.
• Automatically saving station presets
1 Press and hold PRESET + for a few seconds.
Auto tuning starts.
• The tuned frequencies will be preset to the buttons in
numerical order.
• Auto tuning stops after the FM band has finished, or the
limit of 9 presets has been reached.
Listening to station presets
1 Press FUNCTION / to select FM.
The tuned frequency will be shown on the main display.
2 Press the number button (1 to 9) that stores
the FM radio station.
Tip
• Press PRESET +/– repeatedly to selected the station
preset in numerical order.
Note
1 When a new broadcast frequency is stored in a station containing a previously stored frequency, the previous frequency will be overwrit-
ten with the new one.
X-SMC5_SYXZT8_En.book 29 ページ 2011年7月28日 木曜日 午後3時27分
Page: 29
Other connections
12
30
En
Chapter 12:
Other connections
• Before making or changing the connections, switch off
the power and disconnect the power cord from the
power outlet.
• If the AUX IN mini-plug jack is connected to auxiliary
phones jack, the volume of the unit will be adjusted by
the volume on the playback component. If the sound is
distorted after you lower the volume of the unit, try
lowering the volume on the auxiliary playback
component.
Connecting auxiliary components
Connect the front panel AUX IN mini-plug jack to your
auxiliary playback component.
• This method can be used to play music on this unit from
iPods/iPhones that do not support use of an iPod Dock.
Listening to auxiliary components
1 Press FUNCTION / to select AUX.
• AUX is shown on the main display.
2 Start playback of the auxiliary component.
• When Auto mode select is set to Power Save mode, if
the function is set to AUX but no input is connected to
the AUX IN connector and no other control operation is
performed for 30 minutes, the unit will automatically
turn off.
Digital audio
player, etc.
Stereo mini-plug cable
(commercially available)
This unit’s front panel
X-SMC5_SYXZT8_En.book 30 ページ 2011年7月28日 木曜日 午後3時27分
Page: 30
Changing the settings 13
31
En
English
Français
Español
Chapter 13:
Changing the settings
Initial settings
The factory default settings are indicated in italic.
1 Press SET UP to show the Initial Setup screen.
2 Use / to select the item, then press ENTER.
3 Follow the descriptions on the main display to change the setting.
Settings What it does
Timer Setting Setting the wake-up timer and the time the unit will be turned on.
Clock
Setting
Clock Display
(On/On (Standby)/Off)
• Select On to show clock on the sub display.
• When On (Standby) is selected, the clock will appear in the sub-display even when the power is
set to Off.
Time Format
(12H/24H)
Select the 12-hour (12H) clock or 24-hour (24H) clock.
Clock Adjustment
(Auto/Manual)
• Select Auto to adjust the clock automatically.
• Select Manual to adjust the clock manually. How to adjust the clock, see page 35.
Time Zone
Default setting is GMT ±0.
Select the time zone of your area. Time Zone can be adjusted only when Clock Adjustment is set to
Auto.
e.g. If you are in Hawaii (GMT -10:00), use / to select Hawaii and press ENTER.
Daylight Saving Time
(On/Off)
Select On when daylight saving time is in effect. The time advances 1 hour.
Display Setting
(Level3/Level2/Level1)
Dims or brightens the display.
Network
Setting
Network Type
(Wired/Wireless/Auto)
Select the network connection type.
When Auto is selected, the network type is automatically switched between Wired and Wireless. It
is depending on the occasion when the unit is powered on.
Network Configuration
(Wired Setting/Wireless
Setting)
For details on settings, see page 36.
WPS
(PBC/PIN Input)
WPS connection settings, see page 38.
Friendly Name The name of this system displayed on a computer or other device connected to the network can be
changed. The factory default name is X-SMC5.
X-SMC5_SYXZT8_En.book 31 ページ 2011年7月28日 木曜日 午後3時27分
Page: 31
Changing the settings
13
32
En
Option
Setting
BT PIN Select
(0000/1234/8888)
Use this to set the Bluetooth PIN code. (page 20)
Volume Limit Setting
(On/Off)
When On is selected, the volume can be set between 0 to 30.
Each time this setting has been changed, the volume becomes to 0.
Internet Parental Lock
(Change Password/Internet
Parental Lock)
Restricts usage of internet radio using password. Select Internet Parental Lock to On/Off.
You can set up the password from Change Password. (page 39)
Auto mode select
(Power Save mode/Demo
Mode/Off)
When Power Save mode is selected, the unit will be automatically in the standby mode if no
operation has done for more than 30 minutes.
When Demo Mode is selected, the demonstration screen will start if no operation has done for more
than 5 minutes.
Language
(English/Other languages)
Change the language of the operation messages displayed on the main display.
Other languages: French, German, Netherlands, Italian, Spanish, Russian, Japanese
Quick Start Mode
(On/Off)
When this is set to On, the time required for bootup will be shortened. In addition, power-on will
occur simultaneously when AirPlay is performed. Note, however, that when Quick Start Mode is set
to On, the electrical current consumed in the power-off (standby) mode will be about the same as
that required when the power is turned on. Also, if the power cord is disconnected while Quick Start
Mode is set to On, the next time the plug is reconnected, about one minute warm-up will be required
before the unit responds. Wait for one minute after reconnecting the cord before pressing
STANDBY/ON.
Software Update Use this to update unit software.
System Info Use this to check unit information details.
Settings What it does
X-SMC5_SYXZT8_En.book 32 ページ 2011年7月28日 木曜日 午後3時27分
Page: 32
Changing the settings 13
33
En
English
Français
Español
Settings for DVD/CD playback
1 Press FUNCTION / to select DVD/CD as the input source.
DVD/CD is shown on the main display.
2 Press HOME MENU.
The HOME MENU will be displayed on the television screen.
3 Use ///to select the item, then press ENTER.
4 Use ///to change the setting, then press ENTER.
Closing the HOME MENU screen
• Press HOME MENU.
The factory default settings are indicated in italic.
Important
• The following settings are applicable to DVD/CD input; they are disabled when other inputs are selected.
Audio Settings parameters
Video Adjust parameters
Brightness, Contrast, Gamma, Hue and Chroma Level are set to 0 upon purchase.
Initial Settings parameters
• Use these settings to make detailed unit settings.
• Initial Settings cannot be selected during playback. Stop the disc first.
Settings What it does
Equalizer
(Off/Rock/Pop/Live/Dance/
Techno/Classic/Soft)
Select according to the genre of music to be listened to.
Audio DRC
(High/Medium/Low/Off)
• This makes loud sounds weaker and weak sounds louder. Change the setting for example when
watching movies late at night.
• This setting only affects Dolby Digital sound.
• The effect depends on the volume of the connected TV, AV receiver or amplifier, speakers, etc. Try
different settings, and choose the one providing the strongest effect.
Dialog
(High/Medium/Low/Off)
Change this setting if the dialog sound is too low and hard to hear. This setting only affects multichannel
sound.
Settings What it does
Sharpness
(Fine/Standard/Soft)
Adjusts the picture’s sharpness.
Brightness
(-20 to +20)
Adjusts the picture’s brightness.
Contrast
(-16 to +16)
Adjusts the ratio of the brightness of the brightest and darkest portions of the picture.
Gamma
(-3 to +3)
Adjusts the look of the dark portions of the picture.
Hue
(green 9 to red 9)
Adjusts the balance between green and red.
Chroma Level
(-9 to +9)
Adjusts the density of the colors. This setting is effective for sources with many colors, such as cartoons.
X-SMC5_SYXZT8_En.book 33 ページ 2011年7月28日 木曜日 午後3時27分
Page: 33
Changing the settings
13
34
En
Digital Audio Out settings
Video Output settings
Language settings
• If the above setting is used to select “Other Language”, perform operations while referring to Language Code Table on
page 50.
Display settings
Options settings
Setting the HDMI Resolution settings back to their defaults
1 Press  STANDBY/ON to turn the power off.
2 Press  STANDBY/ON while pressing VOLUME –.
Use the buttons on this unit’s top panel. The power turns on.
Settings What it does
HDMI Out Select the audio signals to be output from the HDMI OUT terminal (LPCM (2CH)/Auto/Off) according
to the connected HDMI-compatible device.
Settings What it does
TV Screen • Change the picture display format (4:3 (Letter Box)/4:3 (Pan & Scan)/16:9 (Wide)/16:9
(Compressed)), according to the connected TV.
• The 16:9 (Compressed) setting can be used only when this unit is connected to the television via
HDMI cable, and HDMI Resolution (see below) is set to either “1280x720p”, “1920x1080i”, or
“1920x1080p”.
HDMI Resolution Change the resolution of the video signals output from the HDMI OUT terminals (720x480i/720x576i/
720x480p/720x576p/1280x720p/1920x1080i/1920x1080p). If the image does not appear correctly
after changing the setting, return the setting to “720x480p/720x576p”. Refer to Setting the HDMI
Resolution settings back to their defaults on page 34.
HDMI Color Change the video signals output from the HDMI OUT terminal (Full range RGB/RGB/Component).
Settings What it does
Audio Language Change the language when listening to the sound of DVD-Video discs (English/available languages/
Other Language).
Subtitle Language Change the language of the subtitles displayed for DVD-Video discs (English/available languages/Other
Language).
DVD Menu Lang. Change the language used for the menu displays of DVD-Video discs (w/ Subtitle Lang./available
languages/Other Language).
Subtitle Display Select whether to display subtitles (On) or not (Off).
Settings What it does
OSD Language Change the language of the operation messages (Play, Stop, etc.) displayed on the TV screen (English/
available languages).
Angle Indicator Select whether to display the angle mark on the TV screen (On) or not (Off).
On Screen Display Select whether to display operation messages (Play, Stop, etc.) on the TV screen (On) or not (Off).
Settings What it does
Parental Lock Restrict DVD-Video viewing (Password/Level Change/Country Code). See Language Code Table and
Country/Area Code Table on page 50 in order to set the “Country Code.”
DivX VOD Display the registration code required for playing DivX VOD files (Activate/Deactivate).
X-SMC5_SYXZT8_En.book 34 ページ 2011年7月28日 木曜日 午後3時27分
Page: 34
Changing the settings 13
35
En
English
Français
Español
Using the timer
Setting the clock
Setting the clock before using the timer.1
1 Press SET UP.
The Initial Setup screen is displayed on the main display.
2 Select Clock Setting  Clock Adjustment.
3 Select Auto or Manual.
If you select Manual, go to step 4.
• Auto works only when this unit is connected to the
network. Connect to the network if you want to use
automatic time adjustment.
• Auto can be selected even when not connected to the
Internet, but the clock time will not be automatically
updated.
• In order to use the automatic clock adjustment function,
you must conclude a contract with an Internet service
provider.
4 Use /// or number buttons to adjust
the clock, then press ENTER.
• Using / moves the adjusting digit (hour/minute/
second/AM, PM2
).
• Using / increases or decreases values.
• If you press RETURN, the previous screen will be
displayed.
Setting the wake-up timer3
1 Press SET UP.
The Initial Setup screen is displayed on the main display.
2 Select Timer Setting.
The Timer Setting screen is displayed.
3 Use /// or number buttons to adjust
the clock, then press ENTER.
The TIMER indicator lights and the wake-up timer has been
set.
• Using / moves the adjusting digit (hour/minute/
AM, PM2).
• Using / increases or decreases values.
• If you press RETURN, the previous screen will be
displayed.
• The wake-up timer will turn on an input source at the
volume level you selected when you set the timer.
Turning on/off the wake-up timer4
1 Press to turn on the timer.
The TIMER indicator lights.
• To turn off the timer, press during the timer is on.
Using the wake-up timer
1 Set the wake-up timer to on.
2 Press STANDBY/ON to turn the power off.
3 At the wake-up time, this unit will turn on
automatically and play the selected input
function.
If this unit is not operated for 60 minutes or more after
playback is started by the wake-up timer, power will
automatically turn off (standby mode).
Using the sleep timer
The sleep timer switches off the unit after a specified time so
you can fall asleep without worrying about it.
• Press SLEEP repeatedly to select a switch off
time.
Choose between 5 min, 15 min, 30 min, 60 min, 90 min or Off.5
Note
1 You’ll need to set the clock again if you unplug the unit (or in case of a power failure).
2 The “AM” and “PM” indicators appear only when the Time Format is set to the 12H mode.
3 When the unit is in iPod, FM, Internet Radio, or AUX modes, you can set the timer.
Clock Adjustment
2 21 0 AM
H:M:S AM/PM
4 Timer Setting need to be done before you turn on the timer.
5 The sleep timer can be set by pressing SLEEP while the remaining time is displayed.
Timer Setting
7 0 AM
H:M AM/PM
X-SMC5_SYXZT8_En.book 35 ページ 2011年7月28日 木曜日 午後3時27分
Page: 35
Changing the settings
13
36
En
Network setting
If a broadband router (with built-in DHCP server function) is
connected to this unit, you can simply turn on the DHCP
server function without having to set up the network
manually. A broadband router without a DHCP server
function connected to this unit must be set up as described
below. Before you set up the network, consult with your ISP or
the network manager for the required settings.
It is advised that you also refer to the operation manual
supplied with your network component.
• Any changes made to a router without the DHCP server
function must be reflected to unit network settings.
1 Press SET UP.
The Initial Setup screen is shown on the main display.
2 Select Network Setting  Network
Configuration.
3 Use / to select Wired Setting or Wireless
Setting, then press ENTER.
Next steps are described separately between Wired Setting
and Wireless Setting. Follow the instructions of the
appropriate network type.
Wired Setting
1 Use / to select DHCP Off, then press
ENTER.
The IP address setting screen is displayed.
2 Use /// or number buttons to adjust
the numbers, then press ENTER.
• /: Moves the adjusting digit.
• /: Increases or decreases values.
Static IP Address
The IP address to be entered must be defined within the
following ranges. If the IP address defined is beyond the
following ranges, you cannot play back audio files stored
on components on the network or listen to Internet radio
stations.
Class A: 10.0.0.1 to 10.255.255.254 / Class B: 172.16.0.1
to 172.31.255.254 / Class C: 192.168.0.1 to
192.168.255.254
Subnet Mask
If an xDSL modem or a terminal adapter is directly
connected to this unit, enter the subnet mask listed in
your ISP documentation. In most of the cases, enter
255.255.255.0.
Gateway Address
If a gateway (router) is connected to this unit, enter the
corresponding IP address.
Preferred DNS/Alternate DNS
If there is only one DNS server address listed in your ISP
documentation, enter Preferred DNS. In case there are
more than two DNS server addresses, enter Alternate
DNS in the other DNS server address field.
Proxy Setup
Select Use Proxy Server when you connect this unit to
the Internet via a proxy server. Enter the IP address of
your proxy server in the Proxy Server Address field.
Also, enter the port number of your proxy server in the
‘Proxy Port’ field.
Wired Setting
Wireless Setting
Network Configuration
Static IP Address
192 . 168 . 2 . 4
X-SMC5_SYXZT8_En.book 36 ページ 2011年7月28日 木曜日 午後3時27分
Page: 36
Changing the settings 13
37
En
English
Français
Español
Wireless Setting
1 Use / to select Manual, then press
ENTER.
Tip
• To select Auto, select the network name which you want
to connect to and follow the instruction from the step 4.
2 Use /// to enter the SSID, then press
ENTER.
• /: Moves the adjusting digit.
• /: Changes displayed character.
• SOUND: Switches character types.
• CLEAR: Deletes one character at a time.
3 Use / to select security type, then press
ENTER.
• If you select None.  Step 5
4 Use /// to enter the Pass Phrase or
WEP Key.
• /: Moves the adjusting digit.
• /: Changes displayed character.
• SOUND: Switches character types.
• CLEAR: Deletes one character at a time.
5 Use / to select DHCP Off, then press
ENTER.
The IP address setting screen is displayed.
6 Use /// or number buttons to adjust
the numbers, then press ENTER.
• /: Moves the adjusting digit.
• /: Increases or decreases values.
• The items shown below are adjustable. For details on
adjustable items, see step 2 in Wired Setting on page 36.
Static IP Address
Subnet Mask
Gateway Address
Preferred DNS/Alternate DNS
Proxy Setup
Available Wireless Networks
AAAAA
BBBBB
CCCCC
DDDDD
SSID
[SOUND] Change Text
Delete One Character
[CLEAR]
Security Select
None
WEP
WPAPSK TKIP
WPAPSK AES
Enter Password
[SOUND] Change Text
Delete One Character
[CLEAR]
X-SMC5_SYXZT8_En.book 37 ページ 2011年8月19日 金曜日 午前11時20分
Page: 37
Changing the settings
13
38
En
WPS connection setting
WPS is abbreviation of Wi-Fi Protected Setup. A standard
established by the Wi-Fi Alliance industry group for a function
allowing settings related to interconnection of WPS
compatible wireless LAN devices and encryption to be made
with simple operations.
This unit supports push-button configuration and PIN code
configuration.
Important
• Network Type must be set to Wireless or Auto to use
WPS connection. See page 31 to change the network
type.
1 Press SET UP.
The Initial Setup screen is shown on the main display.
2 Select Network Setting  WPS.
3 Use / to select PBC (Push Button
Configuration) or PIN Input, then press ENTER.
• PBC (Push Button Configuration)
Connection settings are made automatically simply by
pressing the WPS buttons on the WPS compatible
wireless LAN device. Follow the instructions on the main
display. This is the simplest way of making the settings,
and is possible when the WPS compatible wireless LAN
device is equipped with WPS button.
• PIN Input
Connection settings are made by inputting the 8-digit
PIN code shown on the main display to the access point
to which you selected. Follow the instructions shown in
Connecting using PIN code configuration on the right.
Connecting using PIN Input
1 Press SET UP and select Network Setting 
WPS  PIN Input, then press ENTER.
2 Use / to select the access point which
you want to connect, then press ENTER.
3 Confirm the PIN code of this unit, then press
ENTER.
The PIN code of this unit is shown on the main display.
You must check this PIN code to connect to the network.
4 Within 2 minutes after closing the PIN Code
message, input the PIN Code to the access point
selected in step 2.
• The PIN Code input method differs depending on the
LAN device used. For details, consult the operating
instructions accompanying your LAN device.
PBC (Push Button Configuration)
PIN Input
Select WPS Method
Available Wireless Networks
AAAAA
BBBBB
CCCCC
DDDDD
87654321
[ENTER] OK
X-SMC5_SYXZT8_En.book 38 ページ 2011年7月28日 木曜日 午後3時27分
Page: 38
Changing the settings 13
39
En
English
Français
Español
Friendly Name
1 Press SET UP.
2 Select Network Setting  Friendly Name.
3 Use /// to enter Friendly Name,
then press ENTER.
• /: Moves the adjusting digit.
• /: Changes displayed character.
• SOUND: Switches character types.
• CLEAR: Deletes one characters at a time.
Parental lock setup
Restrict internet radio access for children. When Internet
Parental Lock is set to On, you cannot listen to internet radio
without entering a password.1
Turn on/off the parental lock
1 Press SET UP.
The Initial Setup screen is displayed on the main display.
2 Select Option Setting  Internet Parental
Lock  Internet Parental Lock.
3 Use /// or number buttons to enter
the password, then press ENTER.
• /: Moves the adjusting digit.
• /: Increases or decreases numbers.
• CLEAR: Deletes one characters at a time
• The factory default setting is “0000”.
4 Use / to select On or Off, then press
ENTER.
Changing the password
1 Press SET UP.
The Initial Setup screen is displayed on the main display.
2 Select Option Setting  Internet Parental
Lock  Change Password.
3 Use /// or number buttons to enter
the current password, then press ENTER.
4 Use /// or number buttons to enter
the new password, then press ENTER.
• If you press RETURN, the previous screen will be
displayed.
Software Update
Use this procedure to update the unit’s software. You can
update the software via a USB storage device.
Updating via a USB storage device is performed by
downloading the update file from a computer, reading this file
onto a USB storage device then inserting the USB storage
device into the USB port on the unit’s front panel.
• If an update file is provided on the Pioneer website,
download it onto your computer. When downloading an
update file from the Pioneer website onto your
computer, the file will be in ZIP format. Unzip the ZIP file
before saving it on the USB storage device. If there are
any old downloaded files or downloaded files for other
models on the USB storage device, delete them.
Important
• DO NOT unplug the power cord during updating.
• When updating via a USB storage device, do not
disconnect the USB storage device.
1 Press FUNCTION / to select USB as the
input source.
USB is shown on the main display.
2 Press SET UP.
The Initial Setup screen is displayed on the main display.
3 Select Option Setting  Software Update 
Start, then press ENTER.
4 To update, select OK.
The updating screen appears and updating starts.
• The power turns off automatically once updating is
completed.
Software Update messages
Note
1 Even if Internet Parental Lock is set to On, automatic clock adjustments using network will work.
Status
messages
Description
File Not Found. No update file was found on the USB storage
device. Store the file in the USB storage
device’s root directory.
Start
Cancel
Software Update
X-SMC5_SYXZT8_En.book 39 ページ 2011年7月28日 木曜日 午後3時27分
Page: 39
Changing the settings
13
40
En
Sound settings
Using the Virtual Surround/Sound Retriever
You can add exciting effects to audio sources.
1 Press SOUND to select Virtual Surround or
Sound Retriever.
2 Use / to select On or Off, then press
ENTER.
About Sound Retriever
This function enhances sound data lost during compression
of MP3 and other file types, allowing the user to enjoy sound
quality closer to that of the original signal data.
Adjusting the bass and treble
Use the bass and treble controls to adjust the overall tone.
1 Press SOUND to select Bass or Treble.
2 Use / to adjust the bass or treble, then
press ENTER.
You can adjust low and high sounds on a scale of –5 to +5
(eleven steps).
Resetting the system
Use this procedure to reset all system settings to the factory
default.
Important
• Disconnect all components connected to this unit
before the operation.
1 Press STANDBY/ON.
The unit turns on.
2 Press and hold  and STANDBY/ON on
the top panel for three seconds.
The unit turns off (standby mode).
All the settings will be reset to the factory default next time the
unit is turned on.
X-SMC5_SYXZT8_En.book 40 ページ 2011年7月28日 木曜日 午後3時27分
Page: 40
Playable discs and files on discs or USB storage devices 14
41
En
English
Français
Español
Chapter 14:
Playable discs and files on discs or USB
storage devices
Playable discs
• Disc media (DVD-R/-RW/+R/+RW and CD-R/-RW)
must be finalized in order to play on this unit.
Consult the operating instructions for your disc recorder
for details regarding how to perform finalization (this
unit cannot be used to finalize disc media).
• 8 cm discs cannot be played. Also do not attempt to use
adapters for 8 cm CD to play such discs, since
malfunction may result.
• Discs recorded in packet write mode (UDF format) are
not compatible with this unit.
• is a trademark of DVD Format/ Logo Licensing
Corporation.
• is a trademark of FUJIFILM Corporation.
Note
• For detailed instructions on files that iPod/iPhone can
play, refer to the manual supplied with the iPod/iPhone.
• This unit does not support multisession discs or
multiborder recording.
• Multisession/multiborder recording is a method in
which data is recorded on a single disc in two or more
sessions/borders. A “session” or “border” is one
recording unit, consisting of a complete set of data from
lead-in to lead-out.
Discs that cannot be played
• Blu-ray discs
• HD DVDs
• AVCHD
• AVCREC
• DVD-Audio discs
• DVD-RAM discs
• SACDs
• CD-G
About region numbers
DVD player and DVD-Video discs are assigned region
numbers according to the region in which they are sold. This
player’s region number(s) is (are) as shown below.
• DVD-Video: 2
(For Russian model: 5)
Discs not including these numbers cannot be played. Discs
playable on this player are as shown below.
• DVDs: 2 (including 2) and ALL
(For Russian model: 5 (including 5) and ALL)
• Commercially available DVD-Video discs
• DVD-R/-RW/-R DL and DVD+R/+RW/+R DL discs recorded in the Video mode
DVD-R/-RW/-R DL discs recorded in the VR mode
Video CDs
• Commercially available audio CDs
• CD-R/-RW/-ROM discs containing music recorded in the CD-DA format
JPEG files recorded on DVD-R/-RW/-R DL discs or CD-R/-RW/-ROM discs
DivX video files recorded on DVD-R/-RW/-R DL discs or CD-R/-RW/-ROM discs
WMA files recorded on DVD-R/-RW/-R DL discs or CD-R/-RW/-ROM discs
MP3 files recorded on DVD-R/-RW/-R DL discs or CD-R/-RW/-ROM discs
FUJICOLOR-CD
X-SMC5_SYXZT8_En.book 41 ページ 2011年7月28日 木曜日 午後3時27分
Page: 41
Playable discs and files on discs or USB storage devices
14
42
En
Regarding copy protected CDs
This unit is designed to conform to the specifications of the
audio CD format. This unit does not support the playback or
function of discs that do not conform to these specifications.
About playing DualDiscs
A DualDisc is a new two-sided disc, one side of which
contains DVD content - video, audio, etc. - while the other side
contains non-DVD content such as digital audio material.
• The DVD side of a DualDisc can be played on this unit
(excluding any DVD-Audio content).
• The non-DVD, audio side of the disc is not compatible
with this unit.
• It is possible that when loading or ejecting a DualDisc,
the opposite side to that being played will be scratched.
Scratched discs may not be playable.
• For more detailed information on DualDisc
specifications, please refer to the disc manufacturer or
disc retailer.
Playing discs created on computers or BD/DVD
recorders
• It may not be possible to play discs recorded using a
computer due to the application settings or computer’s
environment settings. Record discs in a format playable
on this unit. For details, contact the dealer.
• It may not be possible to play discs recorded using a
computer or a BD/DVD recorder, if burn quality is not
good due to characteristics of the disc, scratches, dirt on
the disc, dirt on the recorder’s lens, etc.
Playable files
• Only discs recorded in ISO9660 Level 1, Level 2 and Joliet
can be played.
• Files protected by DRM (Digital Rights Management)
cannot be played.
• No warranty is provided regarding the ability to play
WMV and MPEG-4 AAC files recorded on disc media
(DVD-R/-RW/-R DL and CD-R/-RW/-ROM).
Supported video file formats
DivX
• DivX is a media technology created by DivX, Inc. DivX
media files contain image data.
• DivX files may also include such advanced playback
functions as menu screens and selection of multiple
subtitle languages/ audio tracks.
• DivX Certified® to play DivX® video, including premium
content.
• DivX®, DivX Certified® and associated logos are
trademarks of DivX, Inc. and are used under license.
File extensions: .avi and .divx (these must be used for this
unit to recognize DivX video files). Note that all files with the
.avi extension are recognized as MPEG4, but not all of these
are necessarily DivX video files and therefore may not be
playable on this unit.
• Files not containing DivX video signals cannot be
played, even if they have the extension “.avi”.
Supported file resolutions include the following:
• NTSC: up to 720 x 480
• PAL: up to 720 x 576
Displaying external subtitle files
• The font sets listed below are available for external
subtitle files. You can see the proper font set on-screen
by setting the Subtitle Language on page 34 to match
the subtitle file.
• This unit supports the following language groups:
• Some external subtitle files may be displayed incorrectly
or not at all.
• For external subtitle files the following subtitle format
filename extensions are supported (please note that
these files are not shown within the disc navigation
menu): .srt, .sub, .ssa, .smi
• The filename of the movie file has to be repeated at the
beginning of the filename for the external subtitle file.
• The number of external subtitle files which can be
switched for the same movie file is limited to a maximum
of 10.
Supported image file formats
JPEG
Resolution: Up to 3072 x 2048 pixels
File extensions: .jpg and .JPG (must be used for this unit to
recognize JPEG files - do not use for other file types)
• This unit supports baseline JPEG.
• This unit supports Exif Ver.2.2.
• This unit does not support progressive JPEG.
Group 1 Afrikaans (af), Basque (eu), Catalan (ca), Danish
(da), Dutch (nl), English (en), Faroese (fo), Finnish
(fi), French (fr), German (de), Icelandic (is), Irish
(ga), Italian (it), Norwegian (no), Portuguese (pt),
Rhaeto-Romanic (rm), Scottish (gd), Spanish (es),
Swedish (sv)
Group 2 Albanian (sq), Croatian (hr), Czech (cs), Hungarian
(hu), Polish (pl), Romanian (ro), Slovak (sk),
Slovenian (sl)
Group 3 Bulgarian (bg), Byelorussian (be), Macedonian
(mk), Russian (ru), Serbian (sr), Ukrainian (uk)
Group 4 Hebrew (iw), Yiddish (ji)
Group 5 Turkish (tr)
X-SMC5_SYXZT8_En.book 42 ページ 2011年7月28日 木曜日 午後3時27分
Page: 42
Playable discs and files on discs or USB storage devices 14
43
En
English
Français
Español
Supported audio file formats
This unit supports the following file formats. Note that some
file formats are not available for playback although they are
listed as playable file formats. Also, the compatibility of file
formats varies depending on the type of server. Check with
your server to ensure the compatibility of file formats
supported by your server.
• If an attempt is made to play files with unsupported
formats, the sound may be intermittent or be
accompanied by noise. In such cases, confirm that the
file format is compatible with this unit.
• Internet radio playback may be affected by the Internet
communications environment, and in this case playback
may not be possible even with the file formats listed
here.
Category Extension Stream
MP3
<*1>
.mp3
MPEG-1/
2 Audio
Layer-3
Sampling
frequency
8 kHz to 48 kHz
Quantization
bitrate
16 bit
Channel 2 ch
Bitrate 8 kbps to
320 kbps
VBR/CBR Supported/
Supported
LPCM
—
<*2>
LPCM
Sampling
frequency
8 kHz to 48 kHz
Quantization
bitrate
16 bit
Channel 2 ch
WAV .wav LPCM
Sampling
frequency
8 kHz to 192 kHz
(Music Server
(Wired))
8 kHz to 48 kHz
(Music Server
(Wireless))
8 kHz to 96 kHz
(USB)
Quantization
bitrate
16 bit, 20 bit,
24 bit
Channel 2 ch
WMA .wma
WMA2/7/
8/9
Sampling
frequency
8 kHz to 48 kHz
Quantization
bitrate
16 bit
Channel 2 ch
Bitrate 5 kbps to
320 kbps
VBR/CBR Supported/
Supported
AAC
.m4a
.aac
.3gp
.3g2
MPEG-4
AAC
MPEG-4
HE AAC
(AAC
Plus v1/
2)
Sampling
frequency
32 kHz to 48 kHz
Quantization
bitrate
16 bit
Channel 2 ch
Bitrate 16 kbps to
320 kbps
VBR/CBR Supported/
Supported
FLAC .flac FLAC
Sampling
frequency
32 kHz to 192 kHz
(Music Server
(Wired))
32 kHz to 48 kHz
(Music Server
(Wireless))
32 kHz to 96 kHz
(USB)
Quantization
bitrate
16 bit, 24 bit
Channel 2 ch
Bitrate —
VBR/CBR —
*1 ”MPEG Layer-3 audio decoding technology licensed from
Fraunhofer IIS and Thomson multimedia.”
*2 Only streaming data from servers is concerned, so there is no
extension.
Category Extension Stream
X-SMC5_SYXZT8_En.book 43 ページ 2011年7月28日 木曜日 午後3時27分
Page: 43
Additional information
15
44
En
Chapter 15:
Additional information
Troubleshooting
Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this
component, check the points below. Sometimes the trouble may lie in another component. Investigate the other components
and electrical appliances being used. If the trouble cannot be rectified even after exercising the checks listed below, ask your
nearest Pioneer authorized service center or your dealer to carry out repair work.
• If the unit does not operate normally due to external effects such as static electricity disconnect the power plug from the
outlet and insert again to return to normal operating conditions.
General problem
Problem Check Remedy
Settings you have made have
been cleared.
Was the power cord unplugged
forcibly while this unit’s power was
on?
Be sure to press STANDBY/ON on this unit’s top panel or press
STANDBY/ON on the remote control and wait for the POWER ON
indicator on the front panel display to turn off before unplugging
the power cord.
Power can’t be turned ON. Is the Quick Start Mode set to On? If the power cord is disconnected while Quick Start Mode is set to
On, the next time the plug is reconnected, about one minute warm-
up will be required before the unit responds. Wait for one minute
after reconnecting the cord before pressing STANDBY/ON.
Difference in volume
between DVDs, CDs, MP3,
WMA, iPod/iPhone and
Tuner.
This is not a problem with this unit. The volume may sound differently depending on the input source
and recording format.
This unit cannot be operated
with the remote control.
Are you operating from far away? Operate from within a distance of Operate within 7 m, 30° of the
remote sensor on the front panel (page 6).
Is the remote control sensor exposed
to direct sunlight or strong artificial
light from a fluorescent bulb, etc.?
The remote control signals may not be received properly if the
remote control sensor is exposed to direct sunlight or strong
artificial light from a fluorescent bulb, etc.
Are the batteries dead? Replace the batteries (page 6).
The unit automatically turns
off or the demonstration
screen automatically starts.
Is Auto mode select set to Power
Save mode or Demo Mode?
Change the setting of Auto mode select to Off (page 32).
X-SMC5_SYXZT8_En.book 44 ページ 2011年7月28日 木曜日 午後3時27分
Page: 44
Additional information 15
45
En
English
Français
Español
Disc playback
The Bluetooth wireless
technology device cannot be
connected or operated.
Sound from the Bluetooth
wireless technology device is
not emitted or the sound is
interrupted.
• Check that no object that emits electromagnetic waves in the 2.4
GHz band (microwave oven, wireless LAN device or Bluetooth
wireless technology apparatus) is near the unit. If such an object
is near the unit, set the unit far from it. Or, stop using the object
emitting the electromagnetic waves.
• Check that the Bluetooth wireless technology device is not too far
from the unit and that obstructions are not set between the
Bluetooth wireless technology device and the unit. Set the
Bluetooth wireless technology device and the unit so that the
distance between them is less than about 10 m* and no
obstructions exist between them.
*The line-of-sight transmission distance is an estimate. Actual
transmission distances supported may differ depending on
surrounding conditions.
• The Bluetooth wireless technology device may not be set to the
communication mode supporting the Bluetooth wireless
technology. Check the setting of the Bluetooth wireless
technology device.
• Check that pairing is correct. The pairing setting was deleted from
this unit or the Bluetooth wireless technology device. Reset the
pairing.
• Check that the profile is correct. Use a Bluetooth wireless technology
device that supports A2DP profile and AVRCP profile.
Problem Check Remedy
Problem Check Remedy
Disc cannot be played or disc
is ejected automatically.
Is the disc scratched? Scratched discs may not play.
Is the disc dirty? Wipe the dirt off the disc (page 52).
Is the disc properly slotted? Slot a disc with the label side facing front.
Does the disc have the right region
number?
Discs with the region number “2 (including 2)” and “ALL” can be
played on this unit.
Is this unit placed in a humid
location?
There could be condensation inside. Wait a while for the
condensation to evaporate. Do not place this unit near an air-
conditioner, etc. (page 51).
Picture is stretched, or
aspect ratio cannot be
switched on TV.
Is the aspect ratio properly set on the
connected TV?
Refer to the TV’s operating instructions and set the TV’s aspect ratio
properly.
Is TV Screen properly set? Set TV Screen properly (page 34). This setting is available for a disc
content. For movies and images stored in iPod/iPhone, operate your
iPod/iPhone.
During DVD playback,
picture is disturbed or dark.
This is not a problem with this unit. This unit supports Rovi copy protection. With some TVs, the picture
may not display properly when playing discs including copy
prevention signals. This is not a malfunction.
Are this unit and TV connected via a
video deck?
When this unit and TV are connected via a video deck, this unit’s
analog copy protect function may cause the picture being played
on the video deck not to display properly. Connect this unit and TV
directly.
Is the TV system properly set? The factory default setting is AUTO. If the picture is distorted,
switch the TV system to the one used in your country or region
(NTSC or PAL) (page 51).
Sound and image are
intermittent during disc
playback.
Sound volume may be too high. Sound and image may be unsteady if sound volume is set too high;
in this case, lower the sound volume.
Folder or file names are not
displayed or are not properly
displayed.
Do the folder of file names contain
more than 14 characters?
The maximum number of characters displayable for the folder and
file names on the Disc Navigator is 14.
X-SMC5_SYXZT8_En.book 45 ページ 2011年7月28日 木曜日 午後3時27分
Page: 45
Additional information
15
46
En
When a USB storage device is connected
Common to both Disc and USB playback
When an iPod/iPhone is connected
Problem Check Remedy
USB storage device is not
recognized.
Is the USB storage device properly
connected?
Connect the device securely (all the way in).
Is the USB storage device connected
via a USB hub?
This unit does not support USB hubs. Connect the USB storage
device directly.
This is not a problem with this unit. Turn the power off then back on.
Some USB storage devices may not be recognized properly.
This unit only supports USB mass storage class devices.
Only the FAT16 and FAT32 file systems are supported. Other file
systems (ex. FAT, NTFS, etc.) are not supported.
This device does not support the use of external hard disc drives.
Much time is required to
recognize the USB storage
device.
What is the USB storage devices
capacity?
Some time may be required to load the data when large capacity
USB storage devices are connected (this could take several
minutes).
File cannot be played. Is the file copyright-protected (by
DRM)?
Copyright-protected files cannot be played.
This is not a problem with this unit. Files stored on a computer cannot be played.
It may not be possible to play some files.
Power is not supplied to the
USB storage device.
Does an error message appear in the
front panel display?
No power is supplied if the power
consumption is too high.
Turn the power off then back on.
Turn the power off, then disconnect and reconnect the USB storage
device.
Press FUNCTION / to switch to the other mode, then switch
again to the USB mode. (When the input is switched back to USB.)
Problem Check Remedy
Folder or file names are not
recognized.
Have you exceeded the maximum
number of folder or file names this
unit can recognize?
Up to 299 folders can be recognized on one disc. Up to 648 files can
be recognized within one folder. Depending on the folder structure,
however, this unit may not be able to recognize certain folders or
files.
Folder or file names are not
displayed in alphabetical
order.
This is not a problem with this unit. The order in which folder and file names are displayed on the main
display is in accordance with the order in which the folder or file
contents were recorded.
Time is required to play JPEG
files.
Are you playing large files? Some time may be required to display large files.
Black bars are displayed
when playing JPEG files.
Are you playing files with different
aspect ratios?
Black bars may be displayed along the top and bottom or sides
when JPEG files with different aspect ratios are played.
Problem Check Remedy
Can’t operate the iPod/
iPhone.
Make sure the iPod/iPhone is connected correctly (refer to
Connecting your iPod/iPhone on page 16). Also, try disconnecting
the iPod/iPhone then reconnecting it.
Confirm that the connected iPod/iPhone is supported by this unit.
If the iPod/iPhone is experiencing a hangup, try resetting the iPod/
iPhone, and reconnect it to the unit.
15_additional_info.fm 46 ページ 2011年8月3日 水曜日 午後4時49分
Page: 46
Additional information 15
47
En
English
Français
Español
When connected to an HDMI-compatible device
Network
Problem Check Remedy
Picture is not displayed. Is the resolution properly set? Set HDMI Resolution properly for the connected device (page 34).
Restore HDMI Resolution to the default setting (720x480p/
720x576p) (page 34).
Is the HDMI cable properly
connected?
Try disconnecting the HDMI cable, then securely reconnecting it.
With some cables, 1080p video signals will not be output.
Sound is not produced or is
distorted.
Is HDMI Out properly set? Set HDMI Out to LPCM (2CH) or Auto (page 34).
The HDMI Out terminal does not output any audio signals except
DVD/CD sound.
Multichannel audio signals
are not output.
Is HDMI Out properly set? Set HDMI Out to Auto (page 34).
The HDMI Out terminal does not output any audio signals except
DVD/CD sound.
Colors are not properly
displayed on TV screen.
Is HDMI Color properly set? Change the HDMI Color setting (page 34).
Problem Check Remedy
Cannot access to the
network.
The LAN cable is not firmly
connected.
Firmly connect the LAN cable (page 9).
The router is not switched on. Switch on the router.
Cannot access to the network
using WPS.
Network Type is set to Wired. Network Type must be set to Wireless or Auto to use WPS
connection. See page 31 to change the network type.
Cannot access to the
component or PC connected
via network.
Internet security software is currently
installed in the connected
component.
There are cases where a component with Internet security software
installed cannot be accessed.
The audio component on the network
which has been switched off is
switched on.
Switch on the audio component on the network before switching on
this unit.
The component connected to the
network is not properly set.
If the client is automatically authorized, you need to enter the
corresponding information again. Check whether the connection
status is set to “Do not authorize”.
There are no playable audio files on
the component connected to the
network.
Check the audio files stored on the component connected to the
network.
Playback does not start. The component is currently
disconnected from this unit or the
power supply.
Check whether the component is properly connected to this unit or
the power supply.
The PC or Internet radio is
not properly operated.
The corresponding IP address is not
properly set.
Switch on the built-in DHCP server function of your router, or set up
the network manually according to your network environment
(page 36).
The IP address is being automatically
configured.
The automatic configuration process takes time. Please wait.
X-SMC5_SYXZT8_En.book 47 ページ 2011年7月28日 木曜日 午後3時27分
Page: 47
Additional information
15
48
En
The audio files stored on
components on the network,
such as a PC, cannot be
played back.
Windows Media Player 11 or
Windows Media Player 12 is not
currently installed on your PC.
Install Windows Media Player 11 or Windows Media Player 12 on
your PC (page 27).
Audio files were recorded in formats
other than MP3, WAV (LPCM only),
MPEG-4 AAC, FLAC, and WMA.
Play back audio files recorded in MP3, WAV (LPCM only), MPEG-4
AAC, FLAC, or WMA. Note that some audio files recorded in these
formats may not be played back on this unit.
Audio files recorded in MPEG-4 AAC
or FLAC are being played back on
Windows Media Player 11 or
Windows Media Player 12.
Audio files recorded in MPEG-4 AAC or FLAC cannot be played
back on Windows Media Player 11 or Windows Media Player 12. Try
using another server. Refer to the operation manual supplied with
your server.
The component connected to the
network is not properly operated.
Check whether the component is affected by special
circumstances or is in the sleep mode. Try rebooting the
component if necessary.
The component connected to the
network does not permit file sharing.
Try changing the settings for the component connected to the
network.
The folder stored on the component
connected to the network has been
deleted or damaged.
Check the folder stored on the component connected to the
network.
Network connections could be
restricted due to the computer’s
network settings, security settings,
etc.
Check the computer’s network settings, security settings, etc.
Cannot access Windows
Media Player 11 or Windows
Media Player 12.
In case of Windows Media Player 11:
You are currently logged onto the
domain through your PC with
Windows XP or Windows Vista
installed.
In case of Windows Media Player 12:
You are currently logged onto the
domain through your PC with
Windows 7 installed.
Instead of logging onto the domain, log onto the local machine.
Audio playback is
undesirably stopped or
disturbed.
The audio file currently being played
back was not recorded in a format
playable on this unit.
Check whether the audio file was recorded in a format supported by
this unit.
Check whether the folder has been damaged or corrupted.
Even audio files listed as playable on this unit may sometimes not
be played back or displayed (page 43).
The LAN cable is currently
disconnected.
Connect the LAN cable properly (page 9).
There is heavy traffic on the network
with the Internet being accessed on
the same network.
Use 100BASE-TX to access the components on the network.
When in the DMR mode, depending
on the external controller being used,
playback may be interrupted when a
volume operation is performed from
the controller.
In this case, adjust the volume from the unit or remote control.
There is a connection routed through
a wireless LAN on the same network.
There may be a shortage of bandwidth on the 2.4 GHz band used by
the wireless LAN. Make wired LAN connections not routed through
a wireless LAN.
Install away from any devices emitting electromagnetic waves on
the 2.4 GHz band (microwave ovens, game consoles, etc.). If this
does not solve the problem, stop using other devices that emit
electromagnetic waves.
Problem Check Remedy
X-SMC5_SYXZT8_En.book 48 ページ 2011年7月28日 木曜日 午後3時27分
Page: 48
Additional information 15
49
En
English
Français
Español
Wireless LAN
Cannot listen to Internet
radio stations.
The firewall settings for components
on the network are currently in
operation.
Check the firewall settings for components on the network.
You are currently disconnected from
the Internet.
Check the connection settings for components on the network, and
consult with your network service provider if necessary (page 8).
The broadcasts from an Internet
radio station are stopped or
interrupted.
Some Internet radio stations on the list of Internet radio stations for
this unit (page 53) may occasionally not be available for listening.
Problem Check Remedy
Problem Check Remedy
Network cannot be accessed
via wireless LAN.
Is Network Type set to Auto and
the LAN cable connected to the unit?
Switch Network Type to Wireless or disconnect the LAN cable
from the unit, then restart the unit.
If Network Type is set to Auto and the LAN cable is connected to
the unit, the unit recognizes the Network Type as Wired.
This unit and base unit (wireless LAN
router, etc.) are too far apart or there
is an obstacle between them.
Improve the wireless LAN environment by moving the unit and base
unit closer together, etc.
There is a microwave oven or other
device generating electromagnetic
waves near the wireless LAN
environment.
Use the system in a place away from microwave ovens or others
device generating electromagnetic waves.
Avoid using devices generating electromagnetic waves as much as
possible when using the system with the wireless LAN.
Multiple wireless devices are
connected to the wireless LAN
router.
When connecting multiple wireless devices, their IP addresses
must be changed.
Wireless LAN connections cannot be
established between the unit and
base unit (wireless LAN router, etc.).
The unit must be set in order to establish wireless LAN
connections. See Connecting using wireless LAN on page 9.
The IP address settings of the unit
does not match the settings of the
wireless LAN router, etc.
Check the IP address settings of the unit (including the DHCP
setting).
If the unit’s DHCP setting is on, turn the unit’s power off, then turn
the power back on.
Check that the IP address of the unit matches the settings of the
wireless LAN router, etc.
If the unit’s DHCP setting is off, set an IP address matching the
network of the base unit (wireless LAN router, etc.).
For example, if the wireless LAN router’s IP address is
“192.168.1.1”, set the unit’s IP address to “192.168.1.XXX” (*1), the
subnet mask to “255.255.255.0”, the gateway and DNS to
“192.168.1.1”.
(*1) Set the “XXX” in “192.168.1.XXX” to a number between 2 and
248 that is not assigned to other devices.
The access point is set to conceal the
SSID.
In this case, the SSID may not be displayed on the access point list
screen. If not, set the SSID, etc., by making the wireless LAN
settings on the unit manually.
The access point’s security settings
use WEP 152-bit length code key or
shared key authentication.
The unit does not support WEP 152-bit length code key or shared
key authentication.
X-SMC5_SYXZT8_En.book 49 ページ 2011年7月28日 木曜日 午後3時27分
Page: 49
Additional information
15
50
En
Language Code Table and Country/Area
Code Table
Language Code Table
Language names (codes) and input codes:
Country/Area Code Table
Country/Area name, Input codes and Country/
Area code
Japanese (ja), 1001 Frisian (fy), 0625
English (en), 0514 Irish (ga), 0701
French (fr), 0618 Scots-Gaelic (gd), 0704
German (de), 0405 Galician (gl), 0712
Italian (it), 0920 Guarani (gn), 0714
Spanish (es), 0519 Gujarati (gu), 0721
Chinese (zh), 2608 Hausa (ha), 0801
Dutch (nl), 1412 Hindi (hi), 0809
Portuguese (pt), 1620 Croatian (hr), 0818
Swedish (sv), 1922 Hungarian (hu), 0821
Russian (ru), 1821 Armenian (hy), 0825
Korean (ko), 1115 Interlingua (ia), 0901
Greek (el), 0512 Interlingue (ie), 0905
Afar (aa), 0101 Inupiak (ik), 0911
Abkhazian (ab), 0102 Indonesian (in), 0914
Afrikaans (af), 0106 Icelandic (is), 0919
Amharic (am), 0113 Hebrew (iw), 0923
Arabic (ar), 0118 Yiddish (ji), 1009
Assamese (as), 0119 Javanese (jw), 1023
Aymara (ay), 0125 Georgian (ka), 1101
Azerbaijani (az), 0126 Kazakh (kk), 1111
Bashkir (ba), 0201 Greenlandic (kl), 1112
Byelorussian (be), 0205 Cambodian (km), 1113
Bulgarian (bg), 0207 Kannada (kn), 1114
Bihari (bh), 0208 Kashmiri (ks), 1119
Bislama (bi), 0209 Kurdish (ku), 1121
Bengali (bn), 0214 Kirghiz (ky), 1125
Tibetan (bo), 0215 Latin (la), 1201
Breton (br), 0218 Lingala (ln), 1214
Catalan (ca), 0301 Laothian (lo), 1215
Corsican (co), 0315 Lithuanian (lt), 1220
Czech (cs), 0319 Latvian (lv), 1222
Welsh (cy), 0325 Malagasy (mg), 1307
Danish (da), 0401 Maori (mi), 1309
Bhutani (dz), 0426 Macedonian (mk), 1311
Esperanto (eo), 0515 Malayalam (ml), 1312
Estonian (et), 0520 Mongolian (mn), 1314
Basque (eu), 0521 Moldavian (mo), 1315
Persian (fa), 0601 Marathi (mr), 1318
Finnish (fi), 0609 Malay (ms), 1319
Fiji (fj), 0610 Maltese (mt), 1320
Faroese (fo), 0615 Burmese (my), 1325
Nauru (na), 1401 Siswati (ss), 1919
Nepali (ne), 1405 Sesotho (st), 1920
Norwegian (no), 1415 Sundanese (su), 1921
Occitan (oc), 1503 Swahili (sw), 1923
Oromo (om), 1513 Tamil (ta), 2001
Oriya (or), 1518 Telugu (te), 2005
Panjabi (pa), 1601 Tajik (tg), 2007
Polish (pl), 1612 Thai (th), 2008
Pashto, Pushto (ps), 1619 Tigrinya (ti), 2009
Quechua (qu), 1721 Turkmen (tk), 2011
Rhaeto-Romance (rm), 1813 Tagalog (tl), 2012
Kirundi (rn), 1814 Setswana (tn), 2014
Romanian (ro), 1815 Tonga (to), 2015
Kinyarwanda (rw), 1823 Turkish (tr), 2018
Sanskrit (sa), 1901 Tsonga (ts), 2019
Sindhi (sd), 1904 Tatar (tt), 2020
Sangho (sg), 1907 Twi (tw), 2023
Serbo-Croatian (sh), 1908 Ukrainian (uk), 2111
Sinhalese (si), 1909 Urdu (ur), 2118
Slovak (sk), 1911 Uzbek (uz), 2126
Slovenian (sl), 1912 Vietnamese (vi), 2209
Samoan (sm), 1913 Volapük (vo), 2215
Shona (sn), 1914 Wolof (wo), 2315
Somali (so), 1915 Xhosa (xh), 2408
Albanian (sq), 1917 Yoruba (yo), 2515
Serbian (sr), 1918 Zulu (zu), 2621
United States, 2119, us Chile, 0312, cl
Argentina, 0118, ar Denmark, 0411, dk
United Kingdom, 0702, gb Germany, 0405, de
Italy, 0920, it Japan, 1016, jp
India, 0914, in New Zealand, 1426, nz
Indonesia, 0904, id Norway, 1415, no
Australia, 0121, au Pakistan, 1611, pk
Austria, 0120, at Philippines, 1608, ph
Netherlands, 1412, nl Finland, 0609, fi
Canada, 0301, ca Mexico, 1324, mx
Korea, Republic of, 1118, kr Russian Federation, 1821, ru
Singapore, 1907, sg Brazil, 0218, br
Switzerland, 0308, ch France, 0618, fr
Sweden, 1905, se Belgium, 0205, be
Spain, 0519, es Portugal, 1620, pt
Thailand, 2008, th Hong Kong, 0811, hk
Taiwan, 2023, tw Malaysia, 1325, my
China, 0314, cn
X-SMC5_SYXZT8_En.book 50 ページ 2011年7月28日 木曜日 午後3時27分
Page: 50
Additional information 15
51
En
English
Français
Español
Setting the TV system
• This setting is available for a disc content. For iPod/
iPhone's TV out setting, operate your iPod/iPhone.
• If the picture of the disc being played is distorted, switch
the TV system to the one used in your country or region.
• When the TV system is switched, the types of discs that
can be played are limited.
• The factory default setting is AUTO.
1 Press  STANDBY/ON to turn the unit's
power off.
2 Press  STANDBY/ON while pressing
VOLUME +.
Use the buttons on the unit's top panel.
The power turns on and the TV system switches as shown
below.
• AUTO  NTSC
• NTSC  PAL
• PAL  AUTO
Cautions on use
When moving this unit
When moving this unit, be sure to first that there is no disc
loaded and disconnect the iPod/iPhone, USB storage device,
LAN cable or any other equipment connected to the unit.
Then press STANDBY/ON on this unit (or STANDBY/ON on
the remote control), wait for the POWER ON indicator on the
front panel display to turn off, then unplug the power cord.
Damage may occur if the unit is transported or moved with a
disc inserted, or when another device is connected to the
iPod/iPhone connector port, USB, LAN (10/100) terminals, or
AUX IN, PHONES mini-plug jacks.
Place of installation
• Choose a stable place near the TV or stereo system being
used with this unit.
• Do not place this unit on top of a TV or color monitor.
Also install it away from cassette decks and other
devices easily affected by magnetic forces.
Avoid the following locations:
• Places exposed to direct sunlight
• Humid or poorly ventilated places
• Extremely hot places
• Places exposed to vibrations
• Places in which there is much dust or cigarette smoke
• Places exposed to soot, steam or heat (kitchens, etc.)
Do not place objects on this unit.
Do not place any objects on top of this unit.
Do not obstruct the ventilation holes.
Do not use this unit on shaggy rugs, beds, sofas, etc., or
wrapped in cloth, etc. Doing so will prevent the heat from
dispersing, leading to damage.
Do not expose to heat.
Do not place this unit on top of an amplifier or other
component that generates heat. When rack mounting it, to
avoid the heat given off by the amplifier or other audio
component, place it on a shelf below the amplifier.
• When not using the unit, set Quick Start Mode to Off,
then turn off the unit’s main power.
• Depending on signal conditions, striped patterns may
appear on a TV screen and noise may enter the sound of
radio broadcasts when the unit’s power is on. In this
event, set Quick Start Mode to Off, then turn off the
unit’s main power.
About condensation
If this unit is moved suddenly from a cold place into a warm room
(in winter, for example) or if the temperature in the room in which
this unit is installed rises suddenly due to heater operation, etc.,
water droplets (condensation) may form inside (on operating
parts and the lens). When condensation is present, this unit will
not operate properly and playback is not possible. Let this unit
stand at room temperature for 1 or 2 hours with the power turned
on (the time depends on the extent of condensation). The water
droplets will dissipate and playback will become possible.
Condensation can also occur in the summer if this unit is directly
exposed to the air flow from an air-conditioner. If this happens,
move this unit to a different place.
Types of
discs/files
Format Playing setting
NTSC PAL AUTO
NTSC NTSC PAL NTSC
PAL NTSC PAL PAL
no disc
- NTSC PAL NTSC
or PAL
X-SMC5_SYXZT8_En.book 51 ページ 2011年7月28日 木曜日 午後3時27分

Question & answers

There are no questions about the Pioneer X-SMC5-K yet.

Ask a question about the Pioneer X-SMC5-K

Have a question about the Pioneer X-SMC5-K but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Pioneer X-SMC5-K. Please make sure that you describe your difficulty with the Pioneer X-SMC5-K as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.