Pioneer X-HM11-S manual

View a manual of the Pioneer X-HM11-S below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Pioneer
  • Product: Hi-Fi system
  • Model/name: X-HM11-S
  • Filetype: PDF
  • Available languages: Dutch, English, German, French, Spanish, Italian

Table of Contents

Page: 1
CAUTION
TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
D3-4-2-1-1_B1_En
WARNING
This equipment is not waterproof. To prevent a fire or
shock hazard, do not place any container filled with
liquid near this equipment (such as a vase or flower
pot) or expose it to dripping, splashing, rain or
moisture.
D3-4-2-1-3_A1_En
WARNING
To prevent a fire hazard, do not place any naked flame
sources (such as a lighted candle) on the equipment.
D3-4-2-1-7a_A1_En
VENTILATION CAUTION
When installing this unit, make sure to leave space
around the unit for ventilation to improve heat radiation
(at least 25 cm at top, 10 cm at rear, and 5 cm at each
side).
WARNING
Slots and openings in the cabinet are provided for
ventilation to ensure reliable operation of the product,
and to protect it from overheating. To prevent fire
hazard, the openings should never be blocked or
covered with items (such as newspapers, table-cloths,
curtains) or by operating the equipment on thick carpet
or a bed.
D3-4-2-1-7b*_A1_En
Operating Environment
Operating environment temperature and humidity:
+5 °C to +35 °C (+41 °F to +95 °F); less than 85 %RH
(cooling vents not blocked)
Do not install this unit in a poorly ventilated area, or in
locations exposed to high humidity or direct sunlight
(or strong artificial light)
D3-4-2-1-7c*_A1_En
WARNING
Store small parts out of the reach of children and
infants. If accidentally swallowed, contact a doctor
immediately.
D41-6-4_A1_En
This product is for general household purposes. Any
failure due to use for other than household purposes
(such as long-term use for business purposes in a
restaurant or use in a car or ship) and which requires
repair will be charged for even during the warranty
period.
K041_A1_En
CAUTION
The STANDBY/ON switch on this unit will not
completely shut off all power from the AC outlet.
Since the power cord serves as the main disconnect
device for the unit, you will need to unplug it from the
AC outlet to shut down all power. Therefore, make
sure the unit has been installed so that the power
plug can be easily unplugged from the AC outlet in
case of an accident. To avoid fire hazard, the power
cord should also be unplugged from the AC outlet
when left unused for a long period of time (for
example, when on vacation).
D3-4-2-2-2a*_A1_En
POWER-CORD CAUTION
Handle the power cord by the plug. Do not pull out the
plug by tugging the cord and never touch the power
cord when your hands are wet as this could cause a
short circuit or electric shock. Do not place the unit, a
piece of furniture, etc., on the power cord, or pinch the
cord. Never make a knot in the cord or tie it with other
cords. The power cords should be routed such that they
are not likely to be stepped on. A damaged power cord
can cause a fire or give you an electrical shock. Check
the power cord once in a while. When you find it
damaged, ask your nearest PIONEER authorized service
center or your dealer for a replacement.
S002*_A1_En
Do not install your speakers overhead on the ceiling or
wall. The grill is designed to be detachable, and as such
it may fall and cause damage or personal injury if
installed overhead. SGK004_A1_En
CAUTION
This product is a class 1 laser product classified
under the Safety of laser products, IEC 60825-1:2007.
CLASS 1 LASER PRODUCT
D58-5-2-2a_A1_En
Page: 2
Information for users on collection and disposal of old equipment and used batteries
These symbols on the products, packaging, and/or accompanying documents mean
that used electrical and electronic products and batteries should not be mixed with
general household waste.
For proper treatment, recovery and recycling of old products and used batteries,
please take them to applicable collection points in accordance with your national
legislation.
By disposing of these products and batteries correctly, you will help to save valuable
resources and prevent any potential negative effects on human health and the
environment which could otherwise arise from inappropriate waste handling.
For more information about collection and recycling of old products and batteries,
please contact your local municipality, your waste disposal service or the point of sale
where you purchased the items.
These symbols are only valid in the European Union.
For countries outside the European Union:
If you wish to discard these items, please contact your local authorities or dealer and
ask for the correct method of disposal.
K058a_A1_En
Symbol examples
for batteries
Symbol for
equipment
Pb
Page: 3
4
En
Thank you for buying this Pioneer product.
Please read through these operating instructions so that you will know how to operate your model properly. After you
have finished reading the instructions, put them in a safe place for future reference.
Contents
01 Before you start
What’s in the box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Loading the batteries in the remote control . . . . . . . . . 5
Using the remote control . . . . . . . . . . . . . . . . . . . . . . . . . 5
02 Part names and functions
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Speaker system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
03 Connections
Speaker connection . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Connecting antennas . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Using external antennas . . . . . . . . . . . . . . . . . . . . . . . . . 11
Plugging in . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
04 Getting started
To turn the power on . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Setting the clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
General control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Input function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Display brightness control . . . . . . . . . . . . . . . . . . . . . . . 12
Volume auto setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Volume control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Muting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Sound controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Equalizer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
P.BASS control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Bass/treble control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Setting the wake-up timer . . . . . . . . . . . . . . . . . . . . . . . 13
Calling the wake-up timer . . . . . . . . . . . . . . . . . . . . . . . . 14
Cancelling the wake-up timer. . . . . . . . . . . . . . . . . . . . . 14
Using the wake-up timer. . . . . . . . . . . . . . . . . . . . . . . . . 14
Using the sleep timer . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Using Headphones . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
05 iPod/iPhone/iPad playback
(X-HM21 only)
Confirming what iPod/iPhone/iPad models are
supported . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Connecting your iPod/iPhone/iPad . . . . . . . . . . . . . . . 15
Connecting iPod/iPhone/iPad using supplied
stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Playing iPod/iPhone/iPad . . . . . . . . . . . . . . . . . . . . . . . 16
06 Disc playback
Playing discs or files . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Advanced CD or MP3/WMA disc playback . . . . . . . . . 18
Direct track search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Repeat play. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Random play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Programmed play (CD or MP3/WMA) . . . . . . . . . . . . . . 19
About downloading MP3/WMA . . . . . . . . . . . . . . . . . . . 19
About folder playback order . . . . . . . . . . . . . . . . . . . . . . 19
Specify the folder to play. . . . . . . . . . . . . . . . . . . . . . . . . 20
Switch the display contents . . . . . . . . . . . . . . . . . . . . . . 20
07 USB playback
Playing USB storage devices . . . . . . . . . . . . . . . . . . . . 21
Repeat play. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Random play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Specify the folder to play. . . . . . . . . . . . . . . . . . . . . . . . . 22
Switch the display contents . . . . . . . . . . . . . . . . . . . . . . 22
Playing in the desired order (Programmed Play) . . . . 22
08 Using the tuner
Listening to the radio broadcasts . . . . . . . . . . . . . . . . 23
Tuning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Saving station presets. . . . . . . . . . . . . . . . . . . . . . . . . . . 23
To recall a memorised station . . . . . . . . . . . . . . . . . . . . 24
To scan the preset stations. . . . . . . . . . . . . . . . . . . . . . . 24
To erase entire preset memory. . . . . . . . . . . . . . . . . . . . 24
Using the Radio Data System (RDS) . . . . . . . . . . . . . . 24
An introduction to RDS. . . . . . . . . . . . . . . . . . . . . . . . . . 24
Searching for RDS programs. . . . . . . . . . . . . . . . . . . . . 24
Information provided by RDS . . . . . . . . . . . . . . . . . . . . . 25
Using the Auto Station Program Memory (ASPM). . . . 25
Notes for RDS operation. . . . . . . . . . . . . . . . . . . . . . . . . 25
09 Other connections
Connecting auxiliary components . . . . . . . . . . . . . . . . 26
10 Additional information
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Playable discs and formats . . . . . . . . . . . . . . . . . . . . . 29
Regarding copy protected CDs . . . . . . . . . . . . . . . . . . . 29
Supported audio file formats . . . . . . . . . . . . . . . . . . . . . 29
Cautions on use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
When moving this unit . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Place of installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Do not place objects on this unit . . . . . . . . . . . . . . . . . . 30
About condensation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Cleaning the product. . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Cleaning the lens. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Handling discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Storing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Cleaning discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
About specially shaped discs. . . . . . . . . . . . . . . . . . . . . 30
About iPod/iPhone/iPad . . . . . . . . . . . . . . . . . . . . . . . . 31
Restoring all the settings to the defaults . . . . . . . . . . 31
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Page: 4
Before you start 01
5
En
English
Français
Español
Chapter 1:
Before you start
What’s in the box
Please confirm that the following accessories are in the box
when you open it.
• Remote Control
• Power cord
• AM antenna cable
• FM wire antenna
• AAA batteries (R03) x 2
• iPad stand (X-HM21 only)
• Warranty card
• Operating instructions (this document)
Loading the batteries in the
remote control
1 Open the rear lid and load the batteries as
illustrated below.
2 Close the rear lid.
CAUTION
• When inserting the batteries, make sure not to damage
the springs on the battery’s terminals. This can cause
batteries to leak or over heat.
• Do not use any batteries other than the ones specified.
Also, do not use a new battery together with an old one.
• When loading the batteries into the remote control, set
them in the proper direction, as indicated by the polarity
marks ( and ).
• Do not heat batteries, disassemble them, or throw them
into flames or water.
• Batteries may have different voltages, even if they are the
same size and shape. Do not use different types of
batteries together.
• To prevent leakage of battery fluid, remove the batteries
if you do not plan to use the remote control for a long
period of time (1 month or more). If the fluid should leak,
wipe it carefully off the inside of the case, then insert
new batteries. If a battery should leak and the fluid
should get on your skin, flush it off with large quantities
of water.
• When disposing of used batteries, please comply with
governmental regulations or environmental public
institution’s rules that apply in your country/area.
• WARNING
Do not use or store batteries in direct sunlight or other
excessively hot place, such as inside a car or near a
heater. This can cause batteries to leak, overheat,
explode or catch fire. It can also reduce the life or
performance of batteries.
Using the remote control
The remote has a range of about 7 m at an angle of about 30º
from the remote sensor.
Keep in mind the following when using the remote control:
• Make sure that there are no obstacles between the
remote and the remote sensor on the unit.
• Remote operation may become unreliable if strong
sunlight or fluorescent light is shining on the unit’s
remote sensor.
• Remote controllers for different devices can interfere
with each other. Avoid using remotes for other
equipment located close to this unit.
• Replace the batteries when you notice a fall off in the
operating range of the remote.
INPU
T
30°
7 m
30°
Page: 5
Part names and functions
02
6
En
Chapter 2:
Part names and functions
Remote control
1  STANDBY/ON
Switches the receiver between standby and on (page 12).
2 Input function buttons
Use to select the input source to this receiver (pages 16, 17,
21, 23, 26).
3 CD Receiver control buttons
CLOCK/TIMER
Use for setting the clock, as well as for setting and
checking the timers (page 12).
SLEEP
See Using the sleep timer on page 14.
4 Numeric buttons (0 to 9)
Use to enter the number (page 18).
5 CLEAR
Use to clear the programmed play (page 19).
6 CD Receiver control buttons
DISPLAY
Press to change the display for songs playing back from
CD or USB (page 20).
FOLDER
Use to select the folder of the MP3/WMA disc or USB
mass storage device (page 19).
MENU
Use to access the menu.
MEMORY/PROGRAM
Use to memory or program the MP3/WMA disc
(page 19).
7 F/G/H/I (TUNE +/–), ENTER
Use to select/switch system settings and modes, and to
confirm actions.
Use TUNE +/– can be used to find radio frequencies
(page 23).
8 PRESET +/–
Use to select preset radio stations (page 24).
9 MUTE
Mutes/unmutes the sound (page 12).
10 Playback control buttons
Use to control each function after you have selected it using
the input function buttons (page 17).
4
5
1
3
2
6
7
8
12
17
13
14
9
10
11
16
15
STANDBY/ON
 
CD USB TUNER AUDIO IN
DISPLAY FOLDER
MENU
PRESET VOLUME
ST/MONO ASPM PTY DISPLAY
+
MUTE
TUNE–
TUNE+
DIMMER
   
 
–
+
–
MEMORY
/PROGRAM
1 2 3
4 5 6
7 8 9
0
BT AUDIO CLOCK/TIMER SLEEP
EQUALIZER
P.BASS
BASS/TREBLE
RANDOM
CLEAR REPEAT
OPEN/CLOSE
RDS
ENTER
OPTION
Page: 6
Part names and functions 02
7
En
English
Français
Español
11 Tuner control buttons
ST/MONO
Use to switch the sound mode between stereo and
monaural. (page 23)
RDS ASPM
Use to search for RDS Auto station program memory
(page 24).
RDS PTY
Use to search for RDS program types (page 24).
RDS DISPLAY
Press to change the RDS display for information mode
(page 24).
12 OPEN/CLOSE
Use to open or close the disc tray (page 17).
13 Sound control buttons
Adjust the sound quality (page 13).
14 RANDOM
Randomize order of track playback from a CD, iPod or USB
(page 18).
15 REPEAT
Press to change the repeat play setting from a CD, iPod or
USB (page 18).
16 Volume control buttons
Use to set the listening volume (page 12).
17 DIMMER
Dims or brightens the display. The brightness can be
controlled in four steps (page 12).
Note
• The BT AUDIO button is not available for this unit.
Speaker system
1 Tweeter
2 Woofer
3 Bass Reflex Duct
Important
• Speaker grille cannot be removed. (X-HM11)
• Make sure nothing comes into contact with the speaker
diaphragms when you remove the speaker grilles. (X-
HM21)
1
2
3
Page: 7
Part names and functions
02
8
En
Front panel
1  STANDBY/ON button
Switches the receiver between standby and on (page 12).
2 Remote sensor
Receives the signals from the remote control.
3 TIMER indicator
Lights when the unit power is off but when the timer setting is
activated.
4 Character display
See Display on page 9.
5 Volume control
Use to set the listening volume (page 12).
6 INPUT button
Selects the input source.
7 Headphone socket
Use to connect headphones. When the headphones are
connected, there is no sound output from the speakers
(page 14).
8 AUDIO IN socket
Use to connect an auxiliary component using a stereo
minijack cable (page 26).
9 USB terminal (X-HM21)
Use to connect your USB mass storage device or Apple iPod/
iPhone/iPad as an audio source (page 21).
USB terminal (X-HM11)
Use to connect your USB mass storage device as an audio
source (page 21).
10 Disc tray
Place the disc, label side up (page 17).
11 Playback control buttons
Select the desired track or file to be played back. Stop current
playback. Stop playback or resume playback from the point
where it was paused.
12 Disc tray open/close button
Use to open or close the disc tray (page 17).
 STANDBY/ON
INPUT
VOLUME
PHONES AUDIO IN 

  
TIMER
X-HM21
X-HM21
7 8
6 9 11 12
10
2 5
1 3 4
Page: 8
Part names and functions 02
9
En
English
Français
Español
Display
1
Lights when the sound is muted.
Note
• The mute icon will be displayed in red.
2 
Start playback.
3 
Pause playback.
4
Timer function is set.
5 Character display
Displays various system information.
 
1 3
2 4
5
Page: 9
Connections
03
10
En
Chapter 3:
Connections
CAUTION
• Be sure to turn off the power and unplug the power cord
from the power outlet whenever making or changing
connections.
• Connect the power cord after all the connections
between devices have been completed.
Speaker connection
• Push open the tabs and insert exposed wire.
• Connect the black wire to (–) terminal, and the red wire
to the (+) terminal.
CAUTION
• These speaker terminals carry HAZARDOUS LIVE
voltage. To prevent the risk of electric shock when
connecting or disconnecting the speaker cables,
disconnect the power cord before touching any
uninsulated parts.
• Do not connect any speakers other than those supplied
to this system.
• Do not connect the supplied speakers to any amplifier
other than the one supplied with this system.
Connection to any other amplifier may result in
malfunction or fire.
• Do not attach these speakers to the wall or ceiling. They
may fall off and cause injury.
• These speakers are magnetically shielded. However,
depending on the installation location, color distortion
may occur if the speaker system is installed extremely
close to the screen of a television set. If this happens,
turn off the television set, and then turn it on after 15 to
30 minutes. If the problem persists, move the speaker
system away from the television set.
• Make sure that the speaker cable cores do not become
exposed and make contact with other cable cores. This
may cause malfunction of the product.
• Do not allow the speaker cable core to come into contact
with the receiver body.
- If the speaker cable core comes into contact with any
metal portion of the receiver’s body, it may damage the
speakers and cause smoke and fire.
Insert speaker cables securely into the terminals and
check that the cable does not come out of easily.
Note
• There is no difference between L and R speakers.
SPEAKERS
LINE
IN
L
R
R L
Left
speaker
Right
speaker
This unit’s rear panel
Page: 10
Connections 03
11
En
English
Français
Español
Connecting antennas
Connect the AM loop antenna and the FM wire antenna as
shown below. To improve reception and sound quality,
connect external antennas (see Using external antennas
below).
1 Connect the AM antenna wires.
Hold the terminal part of the wire when connecting.
2 Fix the AM loop antenna to the attached
stand.
To fix the stand to the antenna, bend in the direction indicated
by the arrow (fig. a) then clip the loop onto the stand (fig. b).
3 Place the AM antenna on a flat surface and
in a direction giving the best reception.
4 Connect the FM wire antenna into the FM
antenna socket.
For best results, extend the FM antenna fully and fix to a wall
or door frame. Don’t drape loosely or leave coiled up.
Using external antennas
To improve FM reception
Use a PAL connector (not supplied) to connect an external
FM antenna.
Plugging in
CAUTION
• Do not use any power cord other than the one supplied
with this unit.
• Do not use the supplied power cord for any purpose
other than that described below.
Before making or changing the connections, switch off the
power and disconnect the power cord from the AC outlet.
After you’ve finished making all connections, plug the unit
into an AC outlet.
AM
LOOP
ANTENNA
FM
UNBAL
75 Ω
2
1
3
4
fig. a fig. b
ANTENNA
FM
UNBAL
75 Ω
One-touch PAL
connector
75 coaxial
cable
AC IN
To AC outlet
This unit’s rear panel
Power cord
Page: 11
Getting started
04
12
En
Chapter 4:
Getting started
To turn the power on
Press the  STANDBY/ON to turn the power on.
After use:
Press the  STANDBY/ON to enter the power stand-by mode.
Note
• In standby mode, if iPod/iPhone/iPad is connected, the
unit turns charge mode.
Setting the clock
1 Press  STANDBY/ON to turn the power on.
2 Press CLOCK/TIMER on the remote control.
“CLOCK” is shown on the main display.
3 Press ENTER.
4 Press HI to set the day, then press ENTER.
5 Press HI to set the hour, then press
ENTER.
6 Press HI to set the minute, then press
ENTER to confirm.
7 Press ENTER.
To confirm the time display:
Press the CLOCK/TIMER. The time display will appear for
about 10 seconds.
To readjust the clock:
Perform “Setting the clock” from step 1.
Note
• When power supply is restored after unit is plugged in
again or after a power failure, reset the clock.
General control
Input function
When the INPUT on main unit is pressed, the current function
will change to different mode. Press the INPUT repeatedly to
select desired function.
X-HM21
X-HM11
Display brightness control
Press DIMMER to dims the display brightness. The
brightness can be controlled in four steps.
Volume auto setting
If you turn off and on the main unit with the volume set to 31
or higher, the volume starts at 30 and sets in to the last set
level.
Volume control
Turn the VOLUME on the unit or press VOLUME +/– on the
remote control to increase or decrease the volume.
CAUTION
• The sound level at a given volume setting depends on
speaker efficiency, location, and various other factors. It
is advisable to avoid exposure to high volume levels. Do
not turn the volume on to full at switch on. Listen to
music at moderate levels. Excessive sound pressure
from earphones and headphones can cause hearing
loss.
Muting
The volume is muted temporarily when pressing the MUTE on
the remote control. Press again to restore the volume.
STANDBY/ON
 
CD USB TUNER AUDIO IN
1 2 3
BT AUDIO CLOCK/TIMER SLEEP
EQUALIZER
OPEN/CLOSE
DISPLAY FOLDER
MENU
PRESET VOLUME
TUNE–
TUNE+
MEMORY
/PROGRAM
ENTER
CD AM
USB/iPod
FM
AUDIO IN
LINE
CD AM
USB
FM
AUDIO IN
LINE
Page: 12
Getting started 04
13
En
English
Français
Español
Sound controls
Equalizer
When the EQUALIZER is pressed, the current mode setting
will be displayed. To change to a different mode, press the
EQUALIZER repeatedly until the desired sound mode
appears.
P.BASS control
When the power is first turned on, the unit will enter the
P.BASS mode which emphasises the bass frequencies. To
cancel the P.BASS mode, press the P.BASS on the remote
control.
Bass/treble control
Press the BASS/TREBLE, then press FG/HI to adjust the
bass or treble.
Note
Simultaneous operation of EQUALIZER, P.BASS and BASS/
TREBLE is not possible. Only the functions that you have
selected will be active.
If you select one of three functions, features
that are not selected will be set as follows.
1 If you change the settings of P.BASS (ON/
OFF).
• EQUALIZER : FLAT
• BASS/TREBLE : BASS=0, TREBLE=0
2 If you change the settings of EQUALIZER.
• P.BASS : OFF
• BASS/TREBLE : BASS=0, TREBLE=0
3 If you change the settings of BASS/TREBLE.
• P.BASS : OFF
• EQUALIZER : FLAT
Setting the wake-up timer
Used to change the existing timer setting, or to set a new
timer.
1 Press  STANDBY/ON to turn the power on.
2 Press and hold CLOCK/TIMER.
3 Press HI to select “ONCE” or “DAILY”,
then press ENTER.
ONCE – Works once only at a preset time.
DAILY – Works at the preset time on a preset day.
4 Press HI to select “TIMER SET”, then
press ENTER.
5 Press HI to select the timer playback
source, then press ENTER.
• CD, FM, AM, USB/iPod, USB, AUDIO IN and LINE can
be selected as the playback source.
6 Press HI to select the timer day, then
press ENTER.
7 Press HI to set the hour, then press
ENTER.
8 Press HI to set the minute, then press
ENTER.
• Set the time to finish as in steps 7 and 8 above.
9 Adjust the volume press VOLUME +/– , then
press ENTER.
10 Press  STANDBY/ON to enter the power
standby mode.
• The TIMER indicator lights up.
NIGHT
FLAT A flat and basic sound.
ACTIVE
DIALOGUE
A sound that can be enjoyed
at night even with lower volume.
A powerful sound that
emphasizes low and high tones.
A sound that allows the radio or
vocals to be heard more easily.
Page: 13
Getting started
04
14
En
Calling the wake-up timer
An existing timer setting can be reused.
1 Follow steps 1 to 3 in “Setting the wake-up
timer”.
2 Press HI to select “TIMER ON”, then press
ENTER.
Cancelling the wake-up timer
Turn off the timer setting.
1 Follow steps 1 to 3 in “Setting the wake-up
timer”.
2 Press HI to select “TIMER OFF”, then
press ENTER.
Using the wake-up timer
1 Press  STANDBY/ON to turn the power
off.
2 At the wake-up time, this unit will turn on
automatically and play the selected input
function.
Note
• If at the wake-up time an iPod/iPhone/iPad is not
connected to the unit or a disc is not inserted, the unit
will be turned on but will not play back the track.
• Some discs may not be played automatically at the wake-
up time.
• When setting the timer set at least one minute between
the start and end time.
Using the sleep timer
The sleep timer switches off the unit after a specified time so
you can fall asleep without worrying about it.
1 Press SLEEP repeatedly to select a switch off
time.
Choose between 10 min, 20 min, 30 min, 60 min, 90 min, 120
min, 150 min, 180 min or OFF. The newly set value displays for
3 seconds, and then the setting is completed.
Note
• The sleep timer can be set by pressing SLEEP while the
remaining time is displayed.
Using Headphones
Insert the headphone’s jack plug into the connector.
When the headphones are connected, there is no sound
output from the speakers.
• Do not turn the volume on to full at switch on and listen
to music at moderate levels. Excessive sound pressure
from earphones and headphones can cause hearing
loss.
• Before plugging in or unplugging the headphone,
reduce the volume.
• Be sure your headphone has a 3.5 mm diameter plug
and impedance between 16  and 50 . The
recommended impedance is 32 .
• Audio from the iPod/iPhone/iPad cannot be heard via
the headphones connected to the unit. “HP MUTE” will
be displayed if you connect the headphones when the
iPod/iPhone/iPad function is selected.
 STANDBY/ON
INPUT
VOLUME
PHONES AUDIO IN 

  
TIMER
X-HM21
Page: 14
iPod/iPhone/iPad playback (X-HM21 only) 05
15
En
English
Français
Español
Chapter 5:
iPod/iPhone/iPad playback (X-HM21
only)
Merely by connecting your iPod/iPhone/iPad to this unit, you
can enjoy high-quality sound from your iPod/iPhone/iPad.
Playback setting for iPod/iPhone/iPad music can be
performed from this unit or the iPod/iPhone/iPad itself.
Confirming what iPod/iPhone/iPad
models are supported
The iPod/iPhone/iPad playable on this unit are shown below.
Note
• Pioneer does not guarantee that this unit plays iPod/
iPhone/iPad models other than the ones specified.
• Some functions may be restricted depending on the
model or software version.
• iPod/iPhone/iPad is licensed for reproduction of non-
copyrighted materials or materials the user is legally
permitted to reproduce.
• Features such as the equalizer cannot be controlled
using this system, and we recommend switching the
equalizer off before connecting.
• Pioneer cannot under any circumstances accept
responsibility for any direct or indirect loss arising from
any inconvenience or loss of recorded material resulting
from iPod/iPhone/iPad failure.
• For detailed instructions on using the iPod/iPhone/iPad,
please refer to the manual supplied with the iPod/
iPhone/iPad.
• This system has been developed and tested for the
software version of iPod/iPhone/iPad indicated on the
website of Pioneer (http://pioneer.jp/homeav/support/
ios/eu/).
• Installing software versions other than indicated on the
website of Pioneer to your iPod/iPhone/iPad may result
in incompatibility with this system.
• This unit cannot be used to record CD, tuner or other
content on an iPod/iPhone/iPad.
Connecting your iPod/iPhone/iPad
Connecting iPod/iPhone/iPad using
supplied stand
1 Connect the iPod/iPhone/iPad cable to the
unit.
2 Pass the iPod/iPhone/iPad cable through the
bottom of the stand and connect it to the iPod/
iPhone/iPad.
3 Set the iPod/iPhone/iPad on the stand.
iPod/iPhone/iPad USB Terminal (Audio only)
iPod nano 3G/4G/5G/6G/7G 
iPod touch 1G/2G/3G/4G/5G 
iPhone 5 
iPhone 4S 
iPhone 4 
iPhone 3GS 
iPhone 3G 
iPhone 
iPad mini 
iPad (4th generation) 
iPad (3rd generation) 
iPad 2 
iPad 
Page: 15
iPod/iPhone/iPad playback (X-HM21 only)
05
16
En
Playing iPod/iPhone/iPad
1 Connect your iPod/iPhone/iPad.
• If an iPod/iPhone/iPad is connected while the unit is
turned on, playback of the iPod/iPhone/iPad will not
begin.
2 Press USB as the input source.
“USB/iPod” is shown on the main display.
3 When the recognition is completed, will
begin playing automatically.
• The available iPod/iPhone/iPad playback controls from
the unit are ,  , .
• In the following case, operate your iPod/iPhone/iPad
directly:
- Searching a file by artist name or genre.
- Playing in the repeat or random mode.
CAUTION
• When your iPod/iPhone/iPad is connected to this unit
and you wish to operate the iPod/iPhone/iPad directly,
be sure to steady the iPod/iPhone/iPad with the other
hand to prevent malfunctions due to faulty contacts.
Note
• For detailed instructions on using the iPod/iPhone/iPad,
please refer to the manual supplied with the iPod/
iPhone/iPad.
• iPod/iPhone/iPad recharging occurs whenever an iPod/
iPhone/iPad is connected to this unit. (This function is
supported in standby mode as well.)
• When input is switched from USB/iPod to another
function, iPod/iPhone/iPad playback is temporarily
stopped.
Important
If this unit cannot play your iPod/iPhone/iPad, perform the
following troubleshooting checks:
• Check whether the iPod/iPhone/iPad is supported by
this unit.
• Reconnect the iPod/iPhone/iPad to the unit. If this
doesn’t seem to work, try resetting your iPod/iPhone/
iPad.
• Check that iPod/iPhone/iPad software is supported by
the unit.
If the iPod/iPhone/iPad cannot be operated, check the
following items:
• Is the iPod/iPhone/iPad connected correctly? Reconnect
the iPod/iPhone/iPad to the unit.
• Is the iPod/iPhone/iPad experiencing a hangup? Try
resetting the iPod/iPhone/iPad, and reconnect it to the
unit.
Page: 16
Disc playback 06
17
En
English
Français
Español
Chapter 6:
Disc playback
This system can play back a standard CD, CD-R/RW in the CD
format and CD-R/RW with MP3 or WMA files, but cannot
record on them. Some audio CD-R and CD-RW discs may not
be playable due to the state of the disc or the device that was
used for recording.
MP3:
MP3 is a form of compression. It is an acronym which stands
for MPEG Audio Layer 3. MP3 is a type of audio code which is
processed by significant compression from the original audio
source with very little loss in sound quality.
• This system supports MPEG-1/2 Audio Layer 3 (Sampling
rates: 8 kHz to 48 kHz; Bit rates: 64 kbps to 384 kbps).
• During VBR file playback, time counter in the display
may differ from its actual playback time.
WMA:
WMA (Windows Media Audio) files are Advanced System
Format files that include audio files which are compressed
with Windows Media Audio codec. WMA is developed by
Microsoft as an audio format file for Windows Media Player.
• This system supports WMA (Sampling rates: 32 kHz/44.1
kHz/48 kHz; Bit rates: 64 kbps to 320 kbps).
• During VBR file playback, time counter in the display
may differ from its actual playback time.
Playing discs or files
1 Press  STANDBY/ON to turn the power on.
2 Press CD on the remote control or INPUT
repeatedly on the main unit to select CD input.
3 Press  OPEN/CLOSE to open the disc tray.
4 Place the disc on the disc tray, label side up.
5 Press  OPEN/CLOSE to close the disc tray.
6 Press  to start playback.
After the last track is played, the unit will stop automatically.
CAUTION
• Do not place two discs in one disc tray.
• Do not play discs of special shapes (heart, octagon, etc).
It may cause malfunctions.
• Do not push the disc tray whilst it is moving.
• If the power fails whilst the tray is open, wait until the
power is restored.
• Be sure to place 8 cm disc in the middle of the disc tray.
Note
• Due to the structure of the disc information, it takes longer
to read an MP3/WMA disc than a normal CD
(approximately 20 to 90 seconds).
• When the beginning of the first track is reached during fast
reverse, the unit will enter the playback mode (only for CD).
• Rewritable multi-session discs with unfinished writing, can
still be played.
• If TV or radio interference occurs during CD operation,
move the unit away from the TV or radio.
Tip
• When no operation has done in CD mode and the audio
file is not played for more than 30 minutes, the power will
automatically turn off.
Various disc functions
Function Main
unit
Remote
control
Operation
Play Press in the stop mode.
Stop Press in the playback mode.
Pause Press in the playback mode.
Press  to resume
playback from the paused
point.
Track up/
down
Press in the playback or stop
mode.
If you press the button in the
stop mode, press  to start
the desired track.
Fast
forward/
reverse
Press and hold down in the
playback mode.
Release the button to resume
playback.








 
 


 
 
Page: 17
Disc playback
06
18
En
Advanced CD or MP3/WMA disc
playback
Direct track search
By using the numeric buttons, the desired tracks on the
current disc can be played.
Use the numeric buttons on the remote control to
select the desired track whilst playing the selected
disc.
Note
• A track number higher than the number of tracks on the
disc cannot be selected.
To stop playback:
Press .
Repeat play
Repeat play can play one track, all tracks or a programmed
sequence continuously.
To repeat one track:
Press REPEAT repeatedly until “REPEAT ONE” appears. Press
ENTER.
To repeat all tracks:
Press REPEAT repeatedly until “REPEAT ALL” appears. Press
ENTER.
To repeat desired tracks:
Perform steps 1 to 5 in “Programmed play (CD or MP3/WMA)”
section on next page and then press REPEAT repeatedly until
“REPEAT ALL” appears. Press ENTER.
To cancel repeat play:
Press REPEAT repeatedly until “REPEAT OFF” appears. Press
ENTER.
Note
• After performing repeat play, be sure to press .
Otherwise, the disc will play continuously.
• During repeat play, random play is not possible.
Random play
The tracks on the disc can be played in random order
automatically.
To random play all tracks:
Press RANDOM repeatedly until “RANDOM ON” appears.
Press ENTER.
To cancel random play:
Press RANDOM repeatedly until “RANDOM OFF” appears.
Press ENTER.
Note
• If you press the  during random play, you can move
to the track selected next by the random operation. On
the other hand, the  does not allow you to move to
the previous track. The beginning of the track being
played will be located.
• In random play, the unit will select and play tracks
automatically. (You cannot select the order of the
tracks.)
• During random play, repeat play is not possible.
DISPLAY FOLDER
MENU
PRESET VOLUME
ST/MONO ASPM PTY DISPLAY
+
MUTE
TUNE–
TUNE+
DIMMER
   
 
–
+
–
MEMORY
/PROGRAM
0
RDS
ENTER
STANDBY/ON
 
CD USB TUNER AUDIO IN
DISPLAY FOLDER
TUNE+
1 2 3
4 5 6
7 8 9
0
BT AUDIO CLOCK/TIMER SLEEP
EQUALIZER
P.BASS
BASS/TREBLE
RANDOM
CLEAR REPEAT
OPEN/CLOSE
Page: 18
Disc playback 06
19
En
English
Français
Español
Programmed play (CD or MP3/WMA)
You can choose up to 32 selections for playback in the order
you like.
1 Whilst in the stop mode, press MEMORY/
PROGRAM on the remote control to enter the
programming save mode.
2 Press  or the numeric buttons on the
remote control to select the desired tracks.
3 Press ENTER to save folder and track
number.
4 Repeat steps 2 to 3 for other folder/tracks.
Up to 32 tracks can be programmed.
• If you want to check the programmed tracks, press
MEMORY/PROGRAM.
• If you make a mistake, the last programmed tracks will
be canceled by pressing CLEAR.
5 Press  to start playback.
To cancel the programmed play mode:
To cancel the programmed play, press  twice on the remote
control. The display will show “PRG CLEAR” and all the
programmed content will be cleared.
Adding tracks to the program:
Press the MEMORY/PROGRAM. Then follow steps 2 to 3 to
add tracks.
Note
• When a disc is ejected anything programmed is cleared.
• If you press the  STANDBY/ON to enter the standby
mode or change the function from CD to another, the
programmed selections will be cleared.
• During the program operation, random play is not
possible.
About downloading MP3/WMA
There are many music sites on the internet that you can
download MP3/WMA music files. Follow the instructions
from the website on how to download the music files. You can
then play back these downloaded music files by burning them
to a CD-R/RW disc.
• Your downloaded song/files are for personal use only.
Any other usage of the song without owner’s
permission, is against the law.
About folder playback order
If MP3/WMA files are recorded in several folders, a folder
number will be set to each folder automatically.
These folders can be selected by the FOLDER on the remote
control. If there is no supported file formats inside the
selected folder, the folder is skipped and the next folder will
be selected.
Example: How the folder numbers are assigned if MP3/WMA
format files are recorded are as shown below.
1 ROOT folder is set as FOLDER 1.
2 As for folders inside ROOT folder (FOLDER A
and FOLDER B), the folder which is recorded
earlier on the disc will be set as FOLDER 2 and
FOLDER 3.
3 As for folder inside FOLDER A (FOLDER C and
FOLDER D), the folder which is recorded earlier
on the disc will be set as FOLDER 4 and FOLDER
5.
4 FOLDER E that is inside FOLDER D will be set
as FOLDER 6.
• The folder and file order information which is recorded
on the disc depends on the writing software. There
maybe possibilities that this unit will playback the files
not according to our expected playback order.
• From a disc with MP3/WMA files up to 255 folders and
999 files (including non playable files) can be read.
ROOT
(FOLDER 1)
FOLDER A
(FOLDER 2)
FOLDER B
(FOLDER 3)
FILE 9
FILE 10
FILE 3
FILE 4
FILE 5
FILE 6
FILE 7
FILE 8
FOLDER E
(FOLDER 6)
FOLDER C
(FOLDER 4)
FOLDER D
(FOLDER 5)
FILE 1
FILE 2
Page: 19
Disc playback
06
20
En
Specify the folder to play
To specify the folder to play, perform the following steps.
1 Press CD, and load an MP3/WMA disc.
2 Press FOLDER, and press FG to select
desired playback folder.
3 Press ENTER.
Playback will start from the first song of the selected folder.
• Even if it is stopped, it is possible to press FG, to select
a folder.
Switch the display contents
1 Press DISPLAY.
If the title, artist and album name has been written to the file,
that information will be displayed. (The unit can only display
alphanumeric characters. Non-alphanumeric character are
displayed as ”*”.)
Note
• “Copyright protected WMA files” or “Unsupported files”
cannot be played back. In these case the files will be
skipped automatically.
• There may be cases where no information can be
displayed.
• Displaying title, artist and album name is only supported
for MP3 files.
STANDBY/ON
 
CD USB TUNER AUDIO IN
DISPLAY FOLDER
TUNE+
1 2 3
4 5 6
7 8 9
0
BT AUDIO CLOCK/TIMER SLEEP
EQUALIZER
P.BASS
BASS/TREBLE
RANDOM
CLEAR REPEAT
OPEN/CLOSE
DISPLAY FOLDER
MENU
PRESET VOLUME
ST/MONO ASPM PTY DISPLAY
+
MUTE
TUNE–
TUNE+
DIMMER
   
 
–
+
–
MEMORY
/PROGRAM
0
RDS
ENTER
Title/Artist/Album display
Number of track, playback
time display
File type display
Number of folder/track
display
Page: 20
USB playback 07
21
En
English
Français
Español
Chapter 7:
USB playback
Playing USB storage devices
It is possible to listen to two-channel audio using the USB
interface on the front of this receiver.
• Pioneer does not guarantee that any file recorded on a
USB storage device will play or that power will be
supplied to a USB storage device. Also note that Pioneer
will accept no responsibility whatsoever for loss of files
on USB storage devices caused by connection to this
unit.
1 Press USB as the input source.
“USB/iPod” is shown on the main display.
2 Connect the USB storage device.
The number of folders or files stored on the connected USB
storage device appear on the main display automatically.
• This receiver does not support a USB hub.
• If an iPod/iPhone/iPad is connected to the unit, the unit
will automatically begin charging it.
3 When the recognition is completed, press
 to start playback.
• When changing to a different input source, stop the USB
memory playback first before changing.
4 Disconnect USB storage device from the USB
terminal.
Turn the power off before removing the USB storage device.
Note
• USB flash drive that supports USB 2.0 can be used.
• This unit may not recognize a USB storage device, play
files or supply power to a USB storage device. For
details, see When a USB storage device is connected on
page 28.
• When a USB storage device is not playing and no
operations have been performed for more than 30
minutes, the unit will automatically power off.
Repeat play
Repeat play can play one track, all tracks or a programmed
sequence continuously.
To repeat one track:
Press REPEAT repeatedly until “REPEAT ONE” appears. Press
ENTER.
To repeat all tracks:
Press REPEAT repeatedly until “REPEAT ALL” appears. Press
ENTER.
To repeat desired tracks:
Perform steps 1 to 5 in “Programmed play (CD or MP3/WMA)”
section on next page and then press REPEAT repeatedly until
“REPEAT ALL” appears. Press ENTER.
To cancel repeat play:
Press REPEAT repeatedly until “REPEAT OFF” appears. Press
ENTER.
Note
• After performing repeat play, be sure to press .
Otherwise, the file of USB storage device will play
continuously.
• During repeat play, random play is not possible.
Random play
The file of USB storage device can be played in random order
automatically.
To random play all tracks:
Press RANDOM repeatedly until “RANDOM ON” appears.
Press ENTER.
To cancel random play:
Press RANDOM repeatedly until “RANDOM OFF” appears.
Press ENTER.
Note
• If you press the  during random play, you can move
to the track selected next by the random operation. On
the other hand, the  does not allow you to move to
the previous track. The beginning of the track being
played will be located.
• In random play, the unit will select and play tracks
automatically. (You cannot select the order of the
tracks.)
• During random play, repeat play is not possible.
PHONES AUDIO IN 
USB storage device
(commercially available)
Page: 21
USB playback
07
22
En
Specify the folder to play
To specify the folder to play, perform the following steps.
1 Press USB, and connect the USB storage
device.
2 Press FOLDER, and press FG to select
desired playback folder.
3 Press ENTER.
Playback will start from the first song of the selected folder.
• Even if it is stopped, it is possible to press FG, to select
a folder.
Switch the display contents
The unit can display the information recorded in the USB
storage device. For details, see Switch the display contents on
page 20.
Playing in the desired order
(Programmed Play)
The unit can play folders stored on a USB storage device in
the desired order. For details, see Programmed play (CD or
MP3/WMA) on page 19.
Page: 22
Using the tuner 08
23
En
English
Français
Español
Chapter 8:
Using the tuner
Listening to the radio broadcasts
The following steps show you how to tune in to FM and AM
radio broadcasts using the automatic (search) and manual
(step) tuning functions. Once you are tuned to a station you
can memorize the frequency for recall later. See Saving
station presets below for more on how to do this.
Tuning
1 Press the  STANDBY/ON to turn the power
on.
2 Press TUNER repeatedly to select desired
frequency band (FM or AM).
3 Press TUNE +/– on the remote control to
tune in to the desired station.
Automatic tuning:
Press and hold TUNE +/–, scanning will start automatically
and the tuner will stop at the first receivable broadcast
station.
Manual tuning:
Press the TUNE +/– repeatedly to tune in to the desired
station.
Note
• When radio interference occurs, automatic tuning may
stop automatically at that point.
• Automatic tuning will skip weak signal stations.
• To stop the automatic tuning, press .
• When an RDS (Radio Data System) station is tuned in,
the frequency will be displayed first. Finally, the station
name will appear.
• Full auto tuning can be achieved for RDS stations using
Auto Station Program Memory (ASPM) mode, see
page 25.
To receive an FM stereo transmission:
• Press ST/MONO to select stereo mode and “AUTO” will
be displayed.
Improving poor FM reception:
1 Press ST/MONO repeatedly to select MONO.
This will change the tuner from stereo to mono and usually
improve the reception.
Saving station presets
If you often listen to a particular radio station, it’s convenient
to have the receiver store the frequency for easy recall
whenever you want to listen to that station (Preset tuning).
This saves the effort of manually tuning in each time. This unit
can memorize up to 45 stations.
(FM 30 stations/AM 15 stations)
1 Tune to a station you want to memorize.
See Tuning above for more on this.
2 Press MEMORY/PROGRAM.
The preset number will flash.
3 Press PRESET +/– to select the preset
channel number.
4 Press MEMORY/PROGRAM to store that
station in memory.
If the preset number has changed from flashing to lighting,
before the station is memorised, repeat the operation from
step 2.
• Repeat steps 1 to 4 to set other stations, or to change a
preset station. When a new station is stored in the
memory, the station previously memorised for that
preset channel number will be erased.
Note
• The backup function protects the memorised stations for
a few hours should there be a power failure or the AC
power cord become disconnected.
DISPLAY FOLDER
MENU
PRESET VOLUME
ST/MONO ASPM PTY DISPLAY
+
MUTE
TUNE–
TUNE+
DIMMER
   
 
–
+
–
MEMORY
/PROGRAM
0
RDS
ENTER
STANDBY/ON
 
CD USB TUNER AUDIO IN
DISPLAY FOLDER
TUNE+
1 2 3
4 5 6
7 8 9
0
BT AUDIO CLOCK/TIMER SLEEP
EQUALIZER
P.BASS
BASS/TREBLE
RANDOM
CLEAR REPEAT
OPEN/CLOSE
DISPLAY FOLDER
MENU
PRESET VOLUME
+
MUTE
TUNE–
TUNE+
DIMMER
 
–
+
–
MEMORY
/PROGRAM
0
ENTER
DISPLAY FOLDER
MENU
PRESET VOLUME
+
MUTE
TUNE–
TUNE+
–
+
–
MEMORY
/PROGRAM
0
RANDOM
CLEAR REPEAT
ENTER
Page: 23
Using the tuner
08
24
En
To recall a memorised station
1 Press PRESET +/– to select the desired
station.
To scan the preset stations
The stations saved in the memory can be scanned
automatically. (Preset memory scan)
1 Press and hold PRESET +/–.
The preset number will appear and the programmed stations
will be tuned in sequentially, for 5 seconds each.
2 Press PRESET +/– again when the desired
station is located.
To erase entire preset memory
1 Press TUNER on the remote control.
2 Press CLEAR until “MEMORY CLEAR”
appears.
Note
• All stations will be erased.
Using the Radio Data System (RDS)
An introduction to RDS
Radio Data System (RDS) is a system used by most FM radio
stations to provide listeners with various kinds of
information—the name of the station and the kind of show
they’re broadcasting, for example.
One feature of RDS is that you can search by type of program.
For example, you can search for a station that’s broadcasting
a show with the program type, JAZZ.
You can search the following program types:
Searching for RDS programs
You can search a program type listed above.
1 Press TUNER on the remote control.
• RDS is only possible in the FM.
2 Press RDS PTY on the remote control.
“SELECT” will appear for about 6 seconds.
3 Press HI to select the program type you
want to hear.
Each time the button is pressed, the program type will appear.
If the button is held down, the program type will appear
continuously.
4 Whilst the selected program type is
displayed (within 6 seconds), Press RDS PTY
again.
After the selected program type has been lit for 2 seconds,
“SEARCH” will appear, and the search operation will start.
Note
• If the display has stopped flashing, start again from step
2. If the unit finds a desired program type, the
corresponding channel number will be lit for about 8
seconds, and then the station name will be displayed.
News – News
Current Affairs – Current
Affairs
Information – General
Information
Sport – Sport
Education – Educational
Drama – Radio plays, etc.
Cultures – National or regional
culture, theater, etc.
Science – Science and
technology
Varied Speech – Usually talk-
based material, such as quiz
shows or interviews.
Pop Music – Pop music
Rock Music – Rock music
Easy Listening – Easy
listening
Light Classics M – ‘Light’
classical music
Serious Classics – ‘Serious’
classical music
Other Music – Music not
fitting above categories
Weather & Metr – Weather
reports
Finance – Stock market
reports, commerce, trading,
etc.
Children’s Progs – Programs
for children
Social Affairs – Social affairs
Religion – Programs
concerning religion
Phone In – Public expressing
their views by Phone
Travel & Touring – Holiday-
type travel rather than traffic
announcements
Leisure & Hobby – Leisure
interests and hobbies
Jazz Music – Jazz
Country Music – Country
music
National Music – Popular
music in a language other than
English
Oldies Music – Popular music
from the ‘50s and’ 60s
Folk Music – Folk music
Documentary – Documentary
Alarm Test – Broadcasting
when testing emergency
broadcast equipment or
receivers.
Alarm – Alarm!
Page: 24
Using the tuner 08
25
En
English
Français
Español
• If you want to listen to the same program type of another
station, press the RDS PTY whilst the channel number or
station name is flashing. The unit will look for the next
station.
• If no station can be found, “NOT FOUND” will appear for
4 seconds.
Information provided by RDS
Each time the RDS DISPLAY is pressed, the display will switch
as follows:
When tuning in to a station other than an RDS station or to an
RDS station which sends weak signal, the display will change
in the following order:
Using the Auto Station Program
Memory (ASPM)
Whilst in the ASPM operation mode, the tuner will
automatically search for new RDS stations. Up to 30 stations
can be stored.
If you have already stored some stations in memory, the
number of new stations you can store will be less.
1 Press TUNER on the remote control.
2 Press and hold down RDS ASPM on the
remote control.
After “ASPM” has flashed for about 4 seconds, scanning will
start (87.5 MHz to 108 MHz).
After scanning, the number of stations stored in memory will
be displayed for 4 seconds, and then “END” will appear for 4
seconds.
To stop the ASPM operation before it is
complete:
Press  whilst it is scanning for stations. The stations which
are already stored in memory will be kept there.
Note
• If the same station is broadcasting on different
frequencies, the strongest frequency will be stored in
memory.
• Any station which has the same frequency as the one
stored in memory will not be stored.
• If 30 stations have already been stored in memory, the
scan will be aborted. If you want to redo the ASPM
operation, erase the preset memory.
• If no station have been stored in memory, “END” will
appear for about 4 seconds.
• If the RDS signals are very weak, station names may not
be stored in memory.
• The same station name can be stored in different
channels.
• In a certain area or during certain time periods, the
station names may temporarily be different.
Notes for RDS operation
If any of the following events occur, it does
not mean that the unit is faulty:
• “PS”, “NO PS” and a station name appear alternately,
and properly.
• If a particular station is not broadcasting properly or a
station is conducting tests, the RDS reception function
may not work properly.
• When you receive an RDS station whose signal is too
weak, information like the station name may not be
displayed.
• “NO PS”, “NO PTY” or “NO RT” will flash for about 5
seconds, and then the frequency will be displayed.
Notes for radio text:
• The first 16 characters of the radio text will appear and
then they will scroll across the display.
• If you tune in to an RDS station which is not
broadcasting any radio text, “NO RT” will be displayed
when you switch to the radio text position.
• Whilst radio text data is received or when the text
contents change, “RT” will be displayed.
STANDBY/ON
 
CD USB TUNER AUDIO IN
DISPLAY FOLDER
TUNE+
1 2 3
4 5 6
7 8 9
0
BT AUDIO CLOCK/TIMER SLEEP
EQUALIZER
P.BASS
BASS/TREBLE
RANDOM
CLEAR REPEAT
OPEN/CLOSE
DISPLAY FOLDER
MENU
PRESET VOLUME
ST/MONO ASPM PTY DISPLAY
+
MUTE
TUNE–
TUNE+
DIMMER
   
 
–
+
–
MEMORY
/PROGRAM
RDS
ENTER
OPTION
Station name (PS) Programme type (PTY)
Frequency Radio text (RT)
No RDS
FM 98.80 MHz
Page: 25
Other connections
09
26
En
Chapter 9:
Other connections
CAUTION
• Before making or changing the connections, switch off
the power and disconnect the power cord from the AC
outlet.
Connecting auxiliary components
Connect the front panel AUDIO IN mini-plug jack to your
auxiliary playback component.
• This method can be used to play music on this unit from
iPods/iPhones/iPads that do not support use of an iPod
Dock and USB terminal.
1 Press AUDIO IN as the input source.
When AUDIO IN is selected “AUDIO IN” will be displayed on
the main display.
Note
• If the AUDIO IN mini-plug jack is connected to auxiliary
phones jack, the volume of the unit will be adjusted by
the volume on the playback component. If the sound is
distorted after you lower the volume of the unit, try
lowering the volume on the auxiliary playback
component.
Connect the rear panel LINE IN audio jacks to your auxiliary
playback component.
1 Press AUDIO IN twice as the input source.
When LINE is selected “LINE” will be displayed on the main
display.
 STANDBY/ON
INPUT
VOLUME
PHONES AUDIO IN 

  
TIMER
X-HM21
PHONES AUDIO IN
Portable audio player, etc.
Stereo mini-plug
cable (commercially
available)
RS
LINE
IN
L
R
L
TV
This unit’s rear panel
Audio cable
(commercially available)
Page: 26
Additional information 10
27
En
English
Français
Español
Chapter 10:
Additional information
Troubleshooting
Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this
component, check the points below. Sometimes the trouble may lie in another component. Investigate the other components
and electrical appliances being used. If the trouble cannot be rectified even after exercising the checks listed below, ask your
nearest Pioneer authorized service center or your dealer to carry out repair work.
• If the unit does not operate normally due to external effects such as static electricity disconnect the power plug from the
outlet and insert again to return to normal operating conditions.
General problem
Problem Check Remedy
Settings you have made have
been cleared.
Was the power cord unplugged? When power cord is unplugged, the settings you have made is
cleared. Please set the clock again. If you do not want to clear the
settings, do not unplug the power cord.
Difference in volume
between CDs, MP3, WMA,
iPod/iPhone/iPad, Tuner,
AUDIO IN and LINE.
This is not a problem with this unit. The volume may sound differently depending on the input source
and recording format.
This unit cannot be operated
with the remote control.
Are you operating from far away? Operate within 7 m, 30º of the remote sensor on the front panel
(page 5).
Is the remote control sensor exposed
to direct sunlight or strong artificial
light from a fluorescent bulb, etc.?
The remote control signals may not be received properly if the
remote control sensor is exposed to direct sunlight or strong
artificial light from a fluorescent bulb, etc.
Are the batteries dead? Replace the batteries (page 5).
Disc cannot be played or disc
is ejected automatically.
Is the disc scratched? Scratched discs may not play.
Is the disc dirty? Wipe the dirt off the disc (page 30).
Is this unit placed in a humid
location?
There could be condensation inside. Wait a while for the
condensation to evaporate. Do not place this unit near an air-
conditioner, etc. (page 30).
Folder or file names are not
recognized. (WMA, MP3).
Have you exceeded the maximum
number of folder or file names this
unit can recognize?
Up to 255 folders can be recognized on one disc. Up to 999 files can
be recognized within one folder. Depending on the folder structure,
however, this unit may not be able to recognize certain folders or
files.
The unit turns off
automatically.
If no play back and no operation has done for 30 minutes or more,
the unit turns off automatically.
Page: 27
Additional information
10
28
En
When a USB storage device is connected
When an iPod/iPhone/iPad is connected
Problem Check Remedy
USB storage device is not
recognized.
Is the USB storage device properly
connected?
Connect the device securely (all the way in).
Is the USB storage device connected
via a USB hub?
This unit does not support USB hubs. Connect the USB storage
device directly.
Is the USB storage device supported
by this unit?
This unit only supports USB mass storage class devices.
This unit supports portable flash memory and digital audio
playback devices.
Only the FAT16 and FAT32 file systems are supported. Other file
systems (exFAT, NTFS, HFS etc.) are not supported.
USB flash drive that supports USB 2.0 can be used.
This device does not support the use of external hard disc drives.
This is not a problem with this unit. Turn the power off then back on.
Some USB storage devices may not be recognized properly.
File cannot be played. Is the file copyright-protected (by
DRM)?
Copyright-protected files cannot be played.
This is not a problem with this unit. Files stored on a computer cannot be played.
It may not be possible to play some files.
Folder or file names are not
displayed or are not properly
displayed.
Do the folder or file names contain
more than 30 characters?
The maximum number of characters displayable for the folder and
file names is 30.
Folder or file names are not
displayed in alphabetical
order.
This is not a problem with this unit. The order in which the folder and file names are displayed depends
on the order in which the folders or files were recorded on the USB
storage device.
Much time is required to
recognize the USB storage
device.
What is the USB storage devices
capacity?
Some time may be required to load the data when large capacity
USB storage devices are connected (this could take several
minutes).
Power is not supplied to the
USB storage device.
Is AUTH ERROR displayed on the
front panel display? No power is
supplied if the power consumption is
too high.
Turn the power off then back on.
Turn the power off, then disconnect and reconnect the USB storage
device.
Press INPUT to switch to the other input, then switch again to the
USB/iPod input.
Problem Remedy
Can’t operate the iPod/iPhone/iPad by the remote control. Make sure the iPod/iPhone/iPad is connected correctly (refer to
Connecting your iPod/iPhone/iPad on page 15).
Can’t operate the iPod/iPhone/iPad. Make sure the iPod/iPhone/iPad is connected correctly (refer to
Connecting your iPod/iPhone/iPad on page 15).
If the iPod/iPhone/iPad is experiencing a hangup, try resetting the
iPod/iPhone/iPad, and reconnect it to the unit.
Page: 28
Additional information 10
29
En
English
Français
Español
Playable discs and formats
• Only the discs that have been finalized can be
played.
• Discs recorded in packet write mode (UDF format) are
not compatible with this unit.
• Only discs recorded in ISO9660 Level 1, Level 2 and Joliet
can be played.
• Files protected by DRM (Digital Rights Management)
cannot be played.
• Corporation and product names mentioned herein are
trademarks or registered trademarks of the respective
corporations.
Note
• This unit does not support multisession discs or
multiborder recording.
• Multisession/multiborder recording is a method in
which data is recorded on a single disc in two or more
sessions/borders. A “session” or “border” is one
recording unit, consisting of a complete set of data from
lead-in to lead-out.
Regarding copy protected CDs
This unit is designed to conform to the specifications of the
audio CD format. This unit does not support the playback or
function of discs that do not conform to these specifications.
Supported audio file formats
• This unit does not support lossless encoding.
Cautions on use
When moving this unit
When moving this unit, be sure to first check that there is no
disc loaded and disconnect the iPod/iPhone/iPad. Then press
STANDBY/ON, wait for “STAND BY” disappears on main
display to turn off, then unplug the power cord. Damage may
occur if the unit is transported or moved with a disc inserted,
or when another device is connected to the USB terminal or
AUDIO IN mini-plug jack.
Place of installation
• Choose a stable place near the TV or stereo system being
used with this unit.
• Do not place this unit on top of a TV or color monitor. Also
install it away from cassette decks and other devices
easily affected by magnetic forces.
Avoid the following locations:
• Places exposed to direct sunlight
• Humid or poorly ventilated places
• Extremely hot places
• Places exposed to vibrations
• Places in which there is much dust or cigarette smoke
• Places exposed to soot, steam or heat (kitchens, etc.)
Audio CD
• Commercially available audio CDs
• CD-R/ -RW/ -ROM discs containing music recorded in the CD-DA format
WMA WMA files recorded on CD-R/ -RW/ -ROM discs or USB storage devices
MP3 MP3 files recorded on CD-R/ -RW/ -ROM discs or USB storage devices
Page: 29
Additional information
10
30
En
Do not place objects on this unit
Do not place any objects on top of this unit.
Do not obstruct the ventilation holes.
Do not use this unit on shaggy rugs, beds, sofas, etc., or
wrapped in cloth, etc. Doing so will prevent the heat from
dispersing, leading to damage.
Do not expose to heat.
Do not place this unit on top of an amplifier or other
component that generates heat. When rack mounting it, to
avoid the heat given off by the amplifier or other audio
component, place it on a shelf below the amplifier.
• Turn off the unit’s power when not using it.
• Depending on signal conditions, striped patterns may
appear on a TV screen and noise may enter the sound of
radio broadcasts when the unit’s power is on. If this
happens, turn the unit’s power off.
About condensation
If this unit is moved suddenly from a cold place into a warm
room (in winter, for example) or if the temperature in the room
in which this unit is installed rises suddenly due to heater
operation, etc., water droplets (condensation) may form
inside (on operating parts and the lens). When condensation
is present, this unit will not operate properly and playback is
not possible. Let this unit stand at room temperature for 1 or
2 hours with the power turned on (the time depends on the
extent of condensation). The water droplets will dissipate and
playback will become possible. Condensation can also occur
in the summer if this unit is directly exposed to the air flow
from an air-conditioner. If this happens, move this unit to a
different place.
Cleaning the product
• Unplug the power cord from the power outlet when
cleaning this unit.
• Clean this unit using a soft cloth. For tough dirt, apply
some neutral detergent diluted in 5 to 6 parts water to a
soft cloth, wring out thoroughly, wipe off the dirt, then
wipe again with a soft, dry cloth.
• Alcohol, thinner, benzene, insecticides, etc., could cause
the print or paint to peel off. Also, leaving rubber or vinyl
products in contact with this unit for long periods of time
could mar the cabinet.
• When using chemical-impregnated wipes, etc., read the
cautions included with the wipes carefully.
Cleaning the lens
• This unit’s lens should not become dirty in normal use,
but if for some reason it should malfunction due to dust
or dirt, consult your nearest Pioneer authorized service
center. Although lens cleaners for players are
commercially available, we advise against using them
since some may damage the lens.
Handling discs
Storing
• Always place discs in their cases and store them
vertically, avoiding hot, humid places, places exposed to
direct sunlight and extremely cold places.
• Be sure to read the cautions included with the disc.
Cleaning discs
• Discs may not play if there are fingerprints or dust on
them. In this case, use a cleaning cloth, etc., to gently
wipe the disc from the inside towards the outside. Do not
use dirty cleaning cloths.
• Do not use benzene, thinner or other volatile chemicals.
Also do not use record spray or antistatic agents.
• For tough dirt, apply some water to a soft cloth, wring out
thoroughly, wipe off the dirt, then wipe off the moisture
with a dry cloth.
• Do not use damaged (cracked or warped) discs.
• Do not let the signal surface of discs get scratched or
dirty.
• Do not attach pieces of paper or stickers to discs. Doing
so could warp discs, making it impossible to play them.
Also note that rental discs often have labels attached to
them, and the label’s glue may have oozed out. Check
that there is no glue around the edges of such labels
before using rented discs.
About specially shaped discs
Specially shaped discs (heart-shaped, hexagonal, etc.)
cannot be played on this unit. Do not attempt to play such
discs, as they could damage this unit.
Page: 30
Additional information 10
31
En
English
Français
Español
About iPod/iPhone/iPad
“Made for iPod,” “Made for iPhone,” and “Made for iPad”
mean that an electronic accessory has been designed to
connect specifically to iPod, iPhone, or iPad, respectively, and
has been certified by the developer to meet Apple
performance standards. Apple is not responsible for the
operation of this device or its compliance with safety and
regulatory standards. Please note that the use of this
accessory with iPod, iPhone, or iPad may affect wireless
performance.
iPad, iPhone, iPod, iPod nano and iPod touch are trademarks of
Apple Inc., registered in the U.S. and other countries.
Restoring all the settings to the
defaults
Use the steps below to restore the all settings to their defaults.
1 Press STANDBY/ON to turn the power on.
2 Press CD on the remote control or INPUT on
the main unit repeatedly to select CD input.
3 Press  OPEN/CLOSE to open the disc tray.
4 Press  STANDBY/ON while pressing .
Use the buttons on this unit’s top panel. “DEFAULT” is
displayed while the settings are being restored. Power is
turned off.
Page: 31
Additional information
10
32
En
Specifications
• Amplifier section
RMS Power Output: . . . . . . . . . . . . . . . . . . . . . . . 15 W + 15 W
(1 kHz, 10 %, T.H.D., 8 )
• Tuner section
Frequency Range (FM) . . . . . . . . . . . . . . 87.5 MHz to 108 MHz
Antenna Input (FM). . . . . . . . . . . . . . . . . . . . .75  unbalanced
Frequency Range (AM). . . . . . . . . . . . . . . 522 kHz to 1620 kHz
Antenna (AM) . . . . . . . . . . . . . . . . . . . . . . . . . . . Loop antenna
• Miscellaneous
USB terminal (X-HM21) . . . . . . . . . . . . . . . . . . . . . . . 5 V, 2.1 A
USB terminal (X-HM11) . . . . . . . . . . . . . . . . . . . . . 5 V, 500 mA
Power source. . . . . . . . . . . . . . AC 220 V to 240 V, 50 Hz/60 Hz
Power consumption
Power on (X-HM21). . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 W
Power on (X-HM11). . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 W
Power stand-by . . . . . . . . . . . . . . . . . . . . . . . . . 0.5 W or less
Dimensions . . . . . . . . 215 mm (W) x 95 mm (H) x 315 mm (D)
Weight (without package) . . . . . . . . . . . . . . . . . . . . . . . . 2.0 kg
• Speaker (S-HM21)
Magnetically shieled speaker system
Type
2-way type speaker system
5 cm Tweeter
10 cm Woofer
Maximum input power . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 W
Impedance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 
Dimensions . . . . . 130 mm (W) x 211.5 mm (H) x 240 mm (D)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.0 kg/each
• Speaker (S-HM11)
Magnetically shieled speaker system
Type
2-way type speaker system
Piezoelectric Tweeter
10 cm Woofer
Maximum input power . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 W
Impedance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 
Dimensions . . . . . 130 mm (W) x 212 mm (H) x 228.5 mm (D)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.0 kg/each
• Accessories
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
AAA batteries (R03) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
AM antenna cable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
FM wire antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Power cord
iPad Stand (X-HM21 only)
Warranty card
Operating instructions (This document)
Note
• The specifications are applicable when the power supply
is 230 V.
• Specifications and the design are subject to possible
modifications without notice, due to improvements.
© 2012 PIONEER CORPORATION.
All rights reserved.
Page: 32
Additional information 10
33
En
English
Français
Español
Page: 64
Informations supplémentaires 10
33
Fr
English
Français
Deutsch
Nederlands
Italiano
Español
Pyccкий
Page: 128
Informazioni aggiuntive 10
33
It
English
Français
Deutsch
Nederlands
Italiano
Español
Pyccкий
Page: 160
Aanvullende informatie 10
33
Nl
English
Français
Deutsch
Nederlands
Italiano
Español
Pyccкий
Page: 196
YJMJH WVZV[@\ MV]@^` 01
5
Ru
English
Français
Deutsch
Nederlands
Italiano
Español
Pyccкий
™V|HJ[ 1:
YJMJH WVZV[@\ MV]@^`
š@\‰[Jƒ^ ‰@^V}ƒX
H01 @B50>811 5+0+=51 6=9-189B?, F8+ @ ;9C 401B68B8@6D8
B(9-6DA19 401;)-(9E;+B81.
• H6(?8 -1B8);G1+;;+*+ 640)@(9;1:
• J)=9(? 418);1:
• J)=9(? );89;;> AM
• H0+@+(+F;): );89;;) FM
• ')8)09C51 AAA (R03) x 2
• H+-B8)@5) -(: iPad (8+(?5+ X-HM21)
• \)0);81C;>C B9081V15)8
• L;B8065G11 4+ 75B4(6)8)G11 (-);;>C -+5629;8)
›^VW@}ƒV ]V^VMJJƒ } ‰‚[Œ^
HX^VW„X@WW@˜@ ‚‰MV}[JWX~
1 œ^ƒM@€^J |VHW†† ƒM`ƒ‚ X ‚^VW@}X^J
]V^VMJ€ƒX, ƒVƒ ‰@ƒV|VW@ WXOJ.
2 žVƒM@€^J |VHW†† ƒM`ƒ‚.
Y™Ÿ—›Y™Ÿ —Ÿ{•Ÿ
• UB8)@(:: =)8)09C51, =6-?89 @;12)89(?;>, F8+=> ;9
4+@09-18? 406E1;> ;)  5+;8)58)I -(: =)8)0995. T8+
2+E98 @>3@)8? 89F? =)8)0995 1(1 4909*09@.
• P9 1B4+(?36C89 (D=>9 -06*19 814> =)8)0995, 50+29
65)3);;>I =)8)0995. [)5E9 ;9 1B4+(?36C89 ;+@6D
=)8)09C56 @29B89 B+ B8)0+C.
• H01 6B8);+@59 =)8)0995 @ 46(?8 -1B8);G1+;;+*+
640)@(9;1: @B8)@(:C89 1I @ 40)@1(?;+C +019;8)G11 @
B++8@98B8@11 B +=+3;)F9;1:21 4+(:0;+B81 ( 1 ).
• P9 ;)*09@)C89 =)8)09C51, ;9 0)3=10)C89 1 ;9 51-)C89 1I
@ +*+;? 1(1 @ @+-6.
• ')8)09C51 2+*68 1298? 0)3(1F;+9 ;)40:E9;19, -)E9
9B(1 +;1 +-1;)5+@> 4+ 0)32906 1 V+029. P9 1B4+(?36C89
+-;+@0929;;+ =)8)09C51 0)3(1F;>I 814+@.
• U+ 13=9E);19 40+895);1: 7(9580+(18) =)8)0995
13@(95189 =)8)09C51, 9B(1 ;9 B+=10)989B? 1B4+(?3+@)8?
46(?8 -1B8);G1+;;+*+ 640)@(9;1: @ 89F9;19
40+-+(E189(?;+*+ 4901+-) @0929;1 (1 29B:G 1(1 =+(99).
U B(6F)9 40+895);1: 7(9580+(18) 8A)89(?;+ 40+80189 B
@;6809;;9C B8+0+;> +8-9(9;19 -(: =)8)0995, 3)892
6B8);+@189 ;+@>9 =)8)09C51. U B(6F)9 40+895);1:
=)8)09C51 1 4+4)-);1: 7(9580+(18) ;) 5+E6, B2+C89 9*+
=+(?O12 5+(1F9B8@+2 @+->.
• H0+13@+-189 681(13)G1D 1B4+(?3+@);;>I =)8)0995 @
B++8@98B8@11 B -9CB8@6DA121 @ @)O9C B80);9/09*1+;9
*+B6-)0B8@9;;>21 4+B8);+@(9;1:21 1(1 40)@1()21 4+
+I0);9 +506E)DA9C B09->.
• ˆ{•¢£{•Ÿ
P9 1B4+(?36C89 1 ;9 I0);189 =)8)09C51 4+-
@+3-9CB8@192 40:2>I B+(;9F;>I (6F9C 1(1 @
4+29A9;11 B @>B+5+C 892490)860+C, ;)401290, @
)@8+2+=1(9 1(1 0:-+2 B +=+*09@)89(92. T8+ 2+E98
@>3@)8? 40+895);19, 4909*09@, 2150+@30>@ 1(1
@+3*+0);19 =)8)0995. J0+29 8+*+, 78+ 2+E98 401@9B81 5
B+50)A9;1D B0+5) B(6E=> 1(1 40+13@+-189(?;+B81
=)8)0995.
•‰@[Œ|@}VWXJ ‰‚[Œ^V HX^VW„X@WW@˜@
‚‰MV}[JWX~
H6(?8 -1B8);G1+;;+*+ 640)@(9;1: 12998 -)(?;+B8? -9CB8@1:
+5+(+ 7 2 401 6*(9 +85(+;9;1: +8 -)8F15) -1B8);G1+;;+*+
640)@(9;1: 30°.
P9 3)=>@)C89 + B(9-6DA1I 2+29;8)I 401 1B4+(?3+@);11
46(?8) MK:
• X(9-189 3) 892, F8+=> 29E-6 46(?8+2 -1B8);G1+;;+*+
640)@(9;1: 1 ;)I+-:A12B: ;) +B;+@;+2 6B80+CB8@9
40192;>2 -)8F15+2 ;9 =>(+ ;15)51I 4094:8B8@1C.
• M1B8);G1+;;+9 640)@(9;19 2+E98 0)=+8)8?
;96B8+CF1@+, 9B(1 ;) -)8F15 -1B8);G1+;;+*+
640)@(9;1: ;) 6B80+CB8@9 4)-)98 B1(?;>C B+(;9F;>C
B@98 1(1 B@98 +8 (D21;9BG9;8;+*+ +B@9A9;1:.
• H6(?8> MK -(: 0)3(1F;>I 6B80+CB8@ 2+*68 B+3-)@)8?
4+29I1 -06* -(: -06*). P9 1B4+(?36C89 46(?8>
-1B8);G1+;;+*+ 640)@(9;1: -(: -06*+*+ +=+06-+@);1:,
0)B4+(+E9;;+*+ 0:-+2 B 7812 6B80+CB8@+2.
• W)29;189 =)8)09C51, 9B(1 @> 3)298189 629;?O9;19
-)(?;+B81 -9CB8@1: 46(?8) MK.
INPU
T
30°
7 2
30°
Page: 211
ˆ@‰M@X|}JHJWXJ iPod/iPhone/iPad (^@[Œƒ@ X-HM21) 05
15
Ru
English
Français
Deutsch
Nederlands
Italiano
Español
Pyccкий
¤[V}V 5:
ˆ@‰M@X|}JHJWXJ iPod/iPhone/iPad
(^@[Œƒ@ X-HM21)
H0+B8+9 4+-B+9-1;9;19 iPod/iPhone/iPad 5 -);;+26
6B80+CB8@6 4+3@+(:98 40+B(6O1@)8? @>B+5+5)F9B8@9;;>C
3@65 B iPod/iPhone/iPad. P)B80+C5) @+B40+13@9-9;1: 263>51
-(: iPod/iPhone/iPad 2+E98 @>4+(;:8?B: B -);;+*+ )44)0)8)
1(1 B)2+*+ 6B80+CB8@) iPod/iPhone/iPad.
Y@H^}JMOHJWXJ ‰@HHJMOƒX
\@HJ[J€ iPod/iPhone/iPad
P1E9 401@9-9;> 2+-9(1 iPod/iPhone/iPad, 5+8+0>9 2+*68
@+B40+13@+-18?B: ;) -);;+2 6B80+CB8@9.
YMX\JZVWXJ
• J+24);1: Pioneer ;9 *)0);810698 @+B40+13@9-9;19
-);;+C B1B892+C -06*1I 2+-9(9C iPod/iPhone/iPad, 50+29
65)3);;>I.
• P95+8+0>9 V6;5G11 2+*68 =>8? +*0);1F9;> @
3)@1B12+B81 +8 1B4+(?3692+C 2+-9(1 1(1 @90B11
40+*0)22;+*+ +=9B49F9;1:.
• KB80+CB8@) iPod/iPhone/iPad (1G9;3106D8B: -(:
5+410+@);1: 2)8901)(+@, ;9 3)A1A9;;>I )@8+0B512
40)@+2, 1 2)8901)(+@, 5+410+@);19 5+8+0>I
4+(?3+@)89(D D01-1F9B51 0)309O9;+.
• [)519 V6;5G11, 5)5 75@)()C390, ;9 2+*68
5+;80+(10+@)8?B: B 4+2+A?D -);;+C B1B892>, 4+78+26
4909- @>4+(;9;192 4+-5(DF9;1: 095+29;-698B:
+85(DF)8? 75@)()C390.
• J+24);1: Pioneer ;9 2+E98 ;1 401 5)51I
+=B8+:89(?B8@)I ;9B81 +8@98B8@9;;+B8? 3) 5)5+C-(1=+
40:2+C 1(1 5+B@9;;>C 6A90=, 401F1;9;;>C
;9-+B8)85)21 1(1 4+8909C 3)41B);;>I 2)8901)(+@ @
0936(?8)89 B=+: @ 0)=+89 iPod/iPhone/iPad.
• M(: 4+(6F9;1: 4+-0+=;>I 1;B8065G1C +8;+B189(?;+
1B4+(?3+@);1: iPod/iPhone/iPad +=0)A)C89B? 5
065+@+-B8@6, 401()*)92+26 5 iPod/iPhone/iPad.
• T8) B1B892) =>() 0)30)=+8);) 1 40+89B810+@);) -(:
@90B11 40+*0)22;+*+ +=9B49F9;1: iPod/iPhone/iPad,
65)3);;+C ;) @9=-B)C89 Pioneer
(http://pioneer.jp/homeav/support/ios/eu/).
• KB8);+@5) ;) @)O iPod/iPhone/iPad @90B1C 40+*0)22;+*+
+=9B49F9;1:, +8(1F;>I +8 65)3);;>I ;) @9=-B)C89
Pioneer, 2+E98 =>8? ;96-)F;+C 13-3) ;9B+@29B812+B81 B
-);;+C B1B892+C.
• M);;+9 6B80+CB8@+ ;9 2+E98 1B4+(?3+@)8?B: -(: 3)41B1
-);;>I B CD, 8D;90) 1(1 -06*+*+ 5+;89;8) ;) iPod/
iPhone/iPad.
Y@Hƒ[†ZJWXJ iPod/iPhone/iPad
Y@Hƒ[†ZJWXJ iPod/iPhone/iPad 
X‰@[Œ|@}VWXJ\ ‰MX[V˜VJ\@€
‰@H^V}ƒX
1 Y@H@JHXWX^J ƒV]J[Œ iPod/iPhone/iPad ƒ
‚^M@€^}‚.
2 YM@‰‚^X^J ƒV]J[Œ iPod/iPhone/iPad
ZJMJ| WXOW†† ZV^Œ ^@€ƒX X ‰@H@JHXWX^J
J˜@ ƒ iPod/iPhone/iPad.
iPod/iPhone/iPad ™V|©J\ USB (^@[Œƒ@ V‚HX@)
iPod nano 3G/4G/5G/6G/7G 
iPod touch 1G/2G/3G/4G/5G 
iPhone 5 
iPhone 4S 
iPhone 4 
iPhone 3GS 
iPhone 3G 
iPhone 
iPad mini 
iPad (4-J ‰@ƒ@[JWXJ) 
iPad (3-J ‰@ƒ@[JWXJ) 
iPad 2 
iPad 
Page: 212
ˆ@‰M@X|}JHJWXJ iPod/iPhone/iPad (^@[Œƒ@ X-HM21)
05
16
Ru
3 ›^VW@}X^J iPod/iPhone/iPad WV
‰@H^V}ƒJ.
ˆ@‰M@X|}JHJWXJ iPod/iPhone/iPad
1 Y@Hƒ[†ZJWXJ iPod/iPhone/iPad.
• ^B(1 iPod/iPhone/iPad 4+-5(DF)98B:, 5+*-) -);;>C
)44)0)8 @5(DF9;, @+B40+13@9-9;19 iPod/iPhone/iPad ;9
;)F;98B:.
2 {VO\X^J USB H[~ }`]@MV } ƒVZJ^}J
}¥@HW@˜@ X^@ZWXƒV.
P) +B;+@;+2 -1B4(99 4+5)3>@)98B: 1;-15)G1: «USB/iPod».
3 Y@[J |V}JMJWX~ MV‰@|WV}VWX~
V}^@\V^XZJƒX WVZWJ^~ }@‰M@X|}JHJWXJ.
• L29DA19B: ;) -);;+2 )44)0)89 +0*);> 640)@(9;1:
@+B40+13@9-9;192 iPod/iPhone/iPad - 78+ /,  ,
 .
• U B(9-6DA92 B(6F)9 640)@(:C89 iPod/iPhone/iPad
;94+B09-B8@9;;+:
- H+1B5 V)C() 4+ 129;1 1B4+(;189(: 1(1 E);06.
- U+B40+13@9-9;19 @ 09E129 4+@8+0) 1(1 B(6F)C;+C
4+B(9-+@)89(?;+B81.
Y™Ÿ—›Y™Ÿ —Ÿ{•Ÿ
• J+*-) iPod/iPhone/iPad 4+-B+9-1;9; 5 -);;+26
6B80+CB8@6, 9B(1 @> E9()989 640)@(:8? ;94+B09-B8@9;;+
iPod/iPhone/iPad, ;)-9E;+ 6-90E1@)C89 iPod/iPhone/iPad
-06*+C 065+C, F8+=> 409-+8@0)818? B=+1 @ 0)=+89,
5+8+0>9 2+*68 @+3;15;68? 13-3) 4(+I+*+ 5+;8)58).
YMX\JZVWXJ
• M(: 4+(6F9;1: 4+-0+=;>I 1;B8065G1C +8;+B189(?;+
1B4+(?3+@);1: iPod/iPhone/iPad +=0)A)C89B? 5
065+@+-B8@6, 401()*)92+26 5 iPod/iPhone/iPad.
• H+-3)0:-5) iPod/iPhone/iPad @>4+(;:98B: @B9*-), 5+*-)
iPod/iPhone/iPad 4+-B+9-1;9; 5 -);;+26 6B80+CB8@6.
(M);;): V6;5G1: 4+--90E1@)98B: 8)5E9 @ 09E129
+E1-);1:.)
• ^B(1 @I+- 49095(DF)98B: B USB/iPod ;) -06*6D
V6;5G1D, @+B40+13@9-9;19 iPod/iPhone/iPad @0929;;+
+B8);)@(1@)98B:.
ˆ£ {œ
^B(1 -);;+9 6B80+CB8@+ ;9 2+E98 @+B40+13@9B81 iPod/iPhone/
iPad, @>4+(;189 B(9-6DA19 40+@9051 -(: 4+1B5) 1
6B80);9;1: ;94+()-+5:
• H0+@90?89, 4+--90E1@)98B: (1 4+-B+9-1;9;;>C iPod/
iPhone/iPad -);;>2 6B80+CB8@+2.
• H9094+-B+9-1;189 iPod/iPhone/iPad 5 6B80+CB8@6.
H9093)46B8189 iPod/iPhone/iPad, 9B(1 78+ ;9 B0)=)8>@)98.
• H0+@90?89, 4+--90E1@)98B: (1 40+*0)22;+9
+=9B49F9;19 iPod/iPhone/iPad -);;>2 )44)0)8+2.
^B(1 ;98 @+32+E;+B81 640)@(:8? iPod/iPhone/iPad, 40+@90?89
B(9-6DA19 4)0)2980>:
• H0)@1(?;+ (1 4+-5(DF9; iPod/iPhone/iPad?
H9094+-B+9-1;189 iPod/iPhone/iPad 5 6B80+CB8@6.
• P9 3)@1B (1 iPod/iPhone/iPad? H+40+=6C89 @>4+(;18?
B=0+B ;)B80+95 iPod/iPhone/iPad 1 49094+-B+9-1;189
iPod/iPhone/iPad 5 6B80+CB8@6.
Page: 225
 (CD 
Page: 233
•‰@[Œ|@}VWXJ ^†WJMV
08
24
Ru
• H+@8+0189 O)*1 1 -+ 4, F8+=> ;)B80+18? -06*19 B8);G11
1(1 B29;18? 409-6B8);+@(9;;6D B8);G1D. H01
B+I0);9;11 ;+@+C B8);G11 @ 4)2:81 =6-98 B810)8?B:
B8);G1:, 409-@)0189(?;+ 3);9B9;;): @ 4)2:8? -(: 78+*+
;+290) 3)40+*0)2210+@);;+*+ 5);)().
YMX\JZVWXJ
• H01 )@)01C;+2 +85(DF9;11 418);1: 1(1 +8B+9-1;9;11
5)=9(: 418);1: 490929;;+*+ 8+5) V6;5G1:
09390@10+@);1: 3)A1818 3);9B9;;>9 @ 4)2:8? B8);G11 ;)
;9B5+(?5+ F)B+@.
—[~ }`|@}V |VWJJWW@€ } ‰V\~^Œ
^VW„XX
1 {VO\X^J ƒW@‰ƒ‚ PRESET +/–, Z^@]`
}`]MV^Œ OJ[VJ\‚† ^VW„X†.
—[~ ƒVWXM@}VWX~ ‰MJH‚^VW@}[JWW`¥
^VW„X€
X8);G11, B+I0);9;;>9 @ 4)2:81, 2+*68 B5);10+@)8?B:
)@8+2)81F9B51. (X5);10+@);19 409-6B8);+@(9;;+C 4)2:81)
1 {VO\X^J X ‚HJMOX}V€^J ƒW@‰ƒ‚ PRESET +/–.
Q8+=0)318B: 3)40+*0)2210+@);;>C ;+290, 1
3)40+*0)2210+@);;>9 B8);G11 =6-68 ;)B80)1@)8?B:
4+B(9-+@)89(?;+, ;) 5 B956;- 5)E-):.
2 Y@}^@MW@ WVO\X^J ƒW@‰ƒ‚ PRESET +/– ‰MX
@]WVM‚OJWXX OJ[VJ\@€ ^VW„XX.
—[~ ‰@[W@˜@ ^XMVWX~
‰MJH‚^VW@}[JWW@€ ‰V\~^X
1 {VO\X^J TUNER WV ‰‚[Œ^J
HX^VW„X@WW@˜@ ‚‰MV}[JWX~.
2 {VO\X^J ƒW@‰ƒ‚ CLEAR, ‰@ƒV WJ ‰@~}X^~
XWHXƒV„X~ «MEMORY CLEAR».
YMX\JZVWXJ
• UB9 B8);G11 =6-68 B8908>.
•‰@[Œ|@}VWXJ X^J\`
MVHX@HVWW`¥ (RDS)
žWVƒ@\^}@  X^J\@€ RDS
X1B892) 0)-1+-);;>I (RDS) – 78+ B1B892), 5+8+0):
1B4+(?3698B: =+(?O1;B8@+2 0)-1+B8);G1C @ -1)4)3+;9 FM
-(: 409-+B8)@(9;1: B(6O)89(:2 0)3(1F;+C 1;V+02)G11 –
;)401290, ;)3@);1: 0)-1+B8);G11 1(1 80);B(10692+C
40+*0)22>.
Q-;+C 13 V6;5G1C B1B892> RDS :@(:98B: @+32+E;+B8?
4+1B5) B8);G11, 80);B(106DA9C 809=692>C 814 40+*0)22>.
P)401290, 2+E;+ +B6A9B8@(:8? 4+1B5 B8);G11, 5+8+0):
80);B(10698 40+*0)22> @ E);09 JAZZ (-E)3).
Y+E;+ @9B81 4+1B5 40+*0)22 B(9-6DA1I 814+@:
Y@Xƒ ‰M@˜MV\\ X^J\` MVHX@HVWW`¥
RDS
Y+E;+ +B6A9B8@18? 4+1B5 814+@ 40+*0)22, 4909F1B(9;;>I
@>O9.
1 {VO\X^J TUNER WV ‰‚[Œ^J
HX^VW„X@WW@˜@ ‚‰MV}[JWX~.
• X1B892) RDS -+B864;) 8+(?5+ @ -1)4)3+;9 FM.
2 {VO\X^J RDS PTY WV ‰‚[Œ^J
HX^VW„X@WW@˜@ ‚‰MV}[JWX~.
L;-15)G1: «SELECT» 4+:@18B: 401290;+ ;) 6 B956;-.
3 {VO\X^J HI H[~ }`]@MV ^X‰V
‰M@˜MV\\`, ƒ@^@M‚† ¥@^X^J ‰M@[‚V^Œ.
H01 5)E-+2 ;)E)811 5;+451 =6-98 4+5)3>@)8?B: 814
40+*0)22>. ^B(1 5;+45) 6-90E1@)98B:, 814 40+*0)22> =6-98
4+5)3>@)8?B: ;94090>@;+.
4 ˆ@ }MJ\~ @^@]MVOJWX~ }`]MVWW@˜@ ^X‰V
‰M@˜MV\\` (} ^JZJWXJ 6 Jƒ‚WH), ‰@}^@MW@
WVO\X^J ƒW@‰ƒ‚ RDS PTY.
H+B(9 3)*+0);1: @ 89F9;19 2 B956;- @>=0);;+*+ 814)
40+*0)22>, 4+:@18B: 1;-15)G1: «SEARCH», 1 ;)F;98B:
+490)G1: 4+1B5).
News – ;+@+B81
Current Affairs – 8956A19
B+=>81:
Information – 1;V+02)G1:
Sport – B4+08
Education – o=0)3+@)89(?;):
1;V+02)G1
Drama – p)-1+B4958)5(1 1 8.-.
Cultures – ;)G1+;)(?;): 1
29B8;): 56(?860;): E13;?,
89)80 1 8.-.
Science – ;)65) 1 89I;15)
Varied Speech – 40+*0)22>,
4+B80+9;;>9 ;) =9B9-9 1(1
+=A9;11, ;)401290 @158+01;>
1(1 1;890@?D.
Pop Music – 4+4-263>5)
Rock Music – 0+5-263>5)
Easy Listening – (9*5):
263>5)
Light Classics M – (9*5):
5()BB1F9B5): 263>5)
Serious Classics – c90?93;):
5()BB1F9B5): 263>5)
Other Music – 263>5), ;9
B++8@98B8@6DA):
4909F1B(9;;>2 5)89*+01:2
Weather & Metr – B@+-51 1
40+*;+3> 4+*+->
Finance – =10E9@>9 B@+-51,
5+2290F9B5):, 8+0*+@):
1;V+02)G1: 1 8.-.
Children’s Progs – H0+*0)22>
-(: -989C
Social Affairs – +=A9B8@9;;):
E13;?
Religion – 40+*0)22> +
09(1*11
Phone In – 40+*0)22>,
409-6B2)801@)DA19
+=B6E-9;19 5)5+C-(1=+ 892> 1
+=A9;19 B+ B(6O)89(:21 4+
89(9V+;6
Travel & Touring –
4689O9B8@1: 1 +8->I
Leisure & Hobby – B@+=+-;+9
@092:, 1;8909B> 1 I+==1
Jazz Music – -E)3+@): 263>5)
Country Music – 263>5)
«5);801»
National Music – 4+46(:0;):
263>5) ;9 ;) );*(1CB5+2 :3>59
Oldies Music – 4+46(:0;):
263>5) 1950-I 1 1960-I *+-+@
Folk Music – ;)0+-;): 263>5)
Documentary –
46=(1G1B81F9B519 40+*0)22>
Alarm Test – 80);B(:G1: 401
89B810+@);11 )@)01C;+*+
@9A)89(?;+*+ +=+06-+@);1:
1(1 40192;>I 6B80+CB8@.
Alarm – 809@+*)!
Page: 238
 iPod/iPhone/iPad ;) B80. 15).
P9 0)=+8)98 iPod/iPhone/iPad. K=9-189B?, F8+ iPod/iPhone/iPad 4+-5(DF9; 40)@1(?;+ (B2.


Page: 239
 iPod/iPhone/iPad ;) B80. 15).
^B(1 iPod/iPhone/iPad «3)@1B», 4+40+=6C89 @>4+(;18? B=0+B
;)B80+95 iPod/iPhone/iPad 1 49094+-B+9-1;189 9*+ 5 6B80+CB8@6.
Page: 242
—@‰@[WX^J[ŒWV~ XW@M\V„X~ 10
31
Ru
English
Français
Deutsch
Nederlands
Italiano
Español
Pyccкий
œ HXƒV¥ ‰J„XV[ŒW@€ @M\`
M1B51 +B+=+C V+02> (@ @1-9 B90-G), O9B816*+(?;15) 1 8. 4.)
;9 2+*68 @+B40+13@+-18?B: ;) -);;+2 6B80+CB8@9. P9
4>8)C89B? @+B40+13@9B81 8)519 -1B51, 8)5 5)5 +;1 2+*68
4+@09-18? -);;+9 6B80+CB8@+.
iPod/iPhone/iPad
“Made for iPod,” “Made for iPhone” 1 “Made for iPad” +3;)F)98,
F8+ 7(9580+;;>C 401=+0 =>0 0)30)=+8); B G9(?D
4+-5(DF9;1: +409-9(9;;+ 5 iPod, iPhone 1(1 iPad
B++8@98B8@9;;+, 1 12998B: B9081V1G15)G1: 0)30)=+8F15) +
B++8@98B8@11 B 89I;1F9B5121 I)0)58901B815)21 Apple. Apple
;9 ;9B98 +8@98B8@9;;+B81 3) +=9B49F9;19 0)=+86 -);;+*+
6B80+CB8@) 1(1 9*+ B++8@98B8@1: B+ B8);-)08)21 4+ 89I;159
=93+4)B;+B81 1(1 09*6(:81@;>21 ;+02)21. H+E)(6CB8),
+=0)8189 @;12);19, F8+ 1B4+(?3+@);19 -);;+*+ 401=+0) B
iPod, iPhone 1(1 iPad 2+E98 +801G)89(?;+ B5)3>@)8?B: ;)
5)F9B8@9 =9B40+@+-;+C B@:31.
iPad, iPhone, iPod, iPod nano 
Page: 243
 iPod touch 	
	#
Page: 247
 Apple Inc.,




Question & answers

There are no questions about the Pioneer X-HM11-S yet.

Ask a question about the Pioneer X-HM11-S

Have a question about the Pioneer X-HM11-S but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Pioneer X-HM11-S. Please make sure that you describe your difficulty with the Pioneer X-HM11-S as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.