Pioneer SGY-PM900H90 manual

View a manual of the Pioneer SGY-PM900H90 below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Pioneer
  • Product: Bicycle Computer
  • Model/name: SGY-PM900H90
  • Filetype: PDF
  • Available languages: Dutch, English, German, French, Spanish, Italian

Table of Contents

Page: 0
EN
DE
FR
NE
IT
ES
EN
DE
FR
NL
IT
ES
Please read the Important Information for the
User in the product box for product warnings
and other important safety information.
User's Manual
Pedaling Monitor Sensor
SGY-PM900H90
Page: 1
2
EN
Introduction
Table of Contents
Introduction
Features.................................................................................................................... 3
Manuals.
...................................................................................................................................3
Compatibility............................................................................................................. 4
Getting Started
Product Configuration.
.............................................................................................. 5
Accessories.............................................................................................................................5
Installing and Removing the Batteries/Switching Modes.
........................................ 7
Pairing /Calibration
Pairing with the Cyclocomputer.
..............................................................................10
Calibrating the Sensors...........................................................................................12
Getting Ready........................................................................................................................12
Calibrating the Zero Point......................................................................................................12
Checking the Zero Point........................................................................................................13
Specifications and support
Troubleshooting.......................................................................................................14
Care, Maintenance, and Storage............................................................................16
Specifications..........................................................................................................17
This product is ANT+™ certified.
Visit http://www.thisisant.com/directory/ for a list of compatible
products and apps.
Page: 2
3
EN
Introduction
Features
This product is a sensor system that analyzes the pedaling of a bicycle in
real time. It calculates the direction and intensity of the force acting on the
pedals and calculates pedaling efficiency.
Description of components
Strain gauge unit:	
•• Detects the strain on the crank and calculates the direction
and intensity of the force on the crank.
Magnet ring:	
•• Used to detect the angle of rotation.
Transmitters:	
•• Send information from the strain gauge unit and the
magnet ring to the Cyclocomputer.
Switching modes
The switches in the left and right transmitters change the system to the following modes.
Pedaling mode
•• : Used in combination with the Cyclocomputer SGX-CA900.
This mode calculates pedaling efficiency and maximizes the functionality of
the product.
Power meter mode
•• : Used with a Cyclocomputer that supports ANT+™.
Manuals
The product’s manuals consist of this User’s Manual, an Installation Manual, and
Important Information for the User.
User’s Manual:
••
Explains how to pair the product with the Cyclocomputer and calibrate the sensors.
Installation Manual:
••
[For American Users] http://www.pioneerelectronics.com
[For Canadian Users] http://www.pioneerelectronics.ca
[For European Users] http://www.pioneer.eu
Explains details about handling methods. The product installation methods
(for dealers) are also described as references.
Important Information for the User:
••
Important Information for the User provides detailed information related to safety.
Page: 3
4
EN
Introduction
Compatibility
Crank sets
The product is compatible with the following crank sets.
Crank sets Remarks
SHIMANO FC-9000 Crank lengths of 165, 167.5, 170, 172.5, 175 mm, crank set of
••
50-34T, 52-36T, 52-38T, 53-39T are compatible. *
* Descriptions in this manual are for a 170 mm crank set.
Bottom bracket
The following bottom brackets are compatible.
Bottom bracket Names of products Remarks
HOLLOWTECH II,
JIS68
SHIMANO SM-BB7900 and
	 SM-BB6700 *
Uses magnet ring attachment.
* SHIMANO SM-BB9000 is not compatible.
When you use the following bottom brackets, you need the special optional parts
(sold separately).
Bottom bracket Names of products Remarks
BB86 Pioneer SGY-BB86 and SGY-BB86C Attaches directly to magnet ring and
optional parts (sold separately).
BB30 Pioneer SGY-BB30 and SGY-BB30C
PF30 Pioneer SGY-BBPF30 and SGY-BBPF30C
This product is designed to be used for recreational cycling and cycle training
applications only and is not designed to withstand racing conditions.
Additionally, this product is designed to be used while cycling on paved roads
only. Any damage or malfunction arising from use in racing or riding on dirt roads,
cobblestone or any other unpaved roads will not be covered by the manufacturer’s
limited warranty.
Installing and calibrating the product requires specialized techniques and tools. Ask
the shop where you bought the product to install and calibrate it.
Page: 4
5
EN
Getting
Started
Product Configuration
Accessories
This product contains the following parts.
Pedaling monitor sensor (right side)
Right transmitter
Junction cable
Strain gauge unit
Junction box
Pedaling monitor sensor part (right side) x 1
for 34T
for 36T
for 38T/39T
Strain gauge unit cover (right side) x 1
Junction cable guide × 3
Page: 5
6
EN
Getting
Started
Product Configuration
Pedaling monitor sensor (left side)
Left transmitter
Strain gauge unit
Pedaling monitor sensor part (left side) x 1 Strain gauge unit cover (left side) x 1
Magnet ring
Magnet ring x 2 Magnet ring attachment for Hollowtech II x 2
Accessories
Phillips-head screws x 10
User's Manual (this document)
Warranty Card
Important Information for the User
Batteries (CR2032) x 2 Cable ties x 20
Page: 6
7
EN
Getting
Started
Installing and Removing the Batteries/
Switching Modes
You must install the batteries before using the product.
You can change the sensor modes after installing the batteries.
The product can be used as the ANT+ Power meter with the cyclocomputers of other
••
companies (power meter mode).
To use the product in power meter mode, insert the battery in the right-side part first,
and then the left-side part.
1.	Loosen the screws on the
transmitter and remove its
cover.
Use a philips screwdriver to loosen the
screw and remove the cover.
Be careful not to lose the removed
••
screw.
Right transmitter (screws: 3 x)
••
Left transmitter (screws: 4 x)
••
2.	Remove the old battery.
Right transmitter
••
Page: 7
8
EN
Getting
Started
Installing and Removing the Batteries/Switching Modes
Left transmitter
••
When putting in new batteries for the
••
first time, look at the switches in the
battery compartment and make sure
the sensor mode is set to the mode
you want to use.
The transmitters’ device numbers
••
are printed on the inside of the
covers. Use the device numbers to
pair the sensors with the Pioneer
Cyclocomputer SGX-CA900. Refer
to the Installation Manual for details.
3.	Switch the sensor mode.
Change the sensor mode by using the
slide switch in the battery compartment
while the batteries are removed.
Right transmitter
••
Left transmitter
••
	 Pedaling: pedaling mode
	 ANT+: power meter mode
Set the left and right sensors to the
••
same mode.
For use with Pioneer’s SGX-CA900,
••
set the sensor mode to “Pedaling”.
For use with other cyclocomputer
brands, set the sensor mode to
“ANT+”.
Page: 8
9
EN
Getting
Started
Installing and Removing the Batteries/Switching Modes
4.	Install the new battery (CR2032).
Right transmitter
••
Left transmitter
••
Do not use batteries other than
••
CR2032.
5.	Check the LED display.
Check the following LEDs to make
sure that they are working properly.
Power meter mode
•• :
When the batteries are installed, the
left and right transmitters start pairing.
When pairing is finished, the LEDs
on the left and right transmitters light
green for 10 seconds.
Pedaling mode
•• :
When the batteries are installed, the
LEDs light green for 10 seconds.
If the LEDs do not light, or only one
••
side lights, install the batteries again.
If the LEDs still do not light, the battery
may be almost empty. Replace the
battery with a new one.
When you use it in power meter mode,
••
insert the right battery and then the
left battery and complete pairing the
left and right sensors within 5 minutes.
6.	Install the cover and tighten
the screws to fix it in place.
Use a tool that can measure the torque
to tighten the screws.
Tightening torque: 18 cN·m
••
Tighten the screws on the left
••
transmitter in a diagonal pattern.
Page: 9
10
EN
Pairing
/
Calibration
Pairing with the Cyclocomputer
This section describes how to pair the installed SGX-PM900 pedaling
monitor sensors on your bicycle to the SGX-CA900 Cyclocomputer.
This pairing procedure may be different if you are using a cyclocomputer other
●
●
than the Pioneer SGX-CA900. Please refer to your cyclocomputer’s owner
manual for sensor pairing.
1.	Check the sensor modes.
Check that the right transmitter and the
left transmitter are in "Pedaling mode."
See page 8 to switch the modes.
••
2.	Tap the [Sensors] icon in the
home screen of the SGX-CA900.
The sensor list screen opens.
3.	Rotate the bicycle's crank
set one rotation to start the
transmitter.
Pair with the Cyclocomputer within
••
5 minutes after the transmitters are
activated.
4.	Tap [Connect New] in the
sensor list screen of the
SGX-CA900.
The sensor connection menu opens.
5.	Tap [Device Type] and then
[Pedaling Monitor R].
For the left transmitter, tap [Pedaling
••
Monitor L].
If multiple sensors are activated,
••
bring the main unit closer to the
sensor, or specify the device number
to pair the sensor you want to pair.
Refer to the User's Guide of the
Cyclocomputer SGX-CA900
regarding how to specify a device
number to pair a sensor.
6.	Tap [Search].
The search for the sensor starts.
A [Searching. Please wait.] message
appears.
Page: 10
11
EN
Pairing
/
Calibration
Pairing with the Cyclocomputer
7.	Check the information about
the sensor.
Information about the sensors appears
when the sensors are found.
Check the following items.
[Device Number]
••
Make sure that the device number
is the same as the device number
of the transmitter.
[Error Rate]
••
Make sure that “OK” is displayed.
Refer to the User’s Guide regarding
••
the device numbers of the
transmitters.
If the numbers that are displayed on
••
[Device Number] are different from
the transmitter device numbers,
specify the device numbers to pair
with the sensor.
Refer to the User’s Guide of the
Cyclocomputer SGX-CA900
regarding how to specify a device
number to pair a sensor.
If “NG” is displayed in the [Error
••
Rate] area, the information from the
sensor is not being received correctly
because transmission conditions are
bad. Make sure that the sensor you
are pairing is activated, then bring
the SGX-CA900 closer to the sensor
and perform the pairing operation
again.
You may not pair with the sensor
••
due to the influence of the 2.4 GHz
frequency band. If “NG” is displayed
even if the SGX-CA900 is moved
closer to the sensor and paired with
it, try again someplace where there
is no interference from microwaves,
radio waves, or wireless equipment.
Pairing of the right transmitter is
completed.
Then, pair the left transmitter.
Page: 11
12
EN
Pairing
/
Calibration
Calibrating the Sensors
This section describes how to use the Cyclocomputer SGX-CA900 to calibrate
the zero point of the pedaling monitor sensor that is installed on the bicycle.
The right-side pedaling monitor sensor is used as an example in this description. The
••
procedure to calibrate the left side is the same as for the right side.
Refer to the User’s Manual of the Cyclocomputer you are using for calibrating in the
••
power meter mode.
Getting Ready
1.	Stop the bicycle on a flat safe
place.
2.	Remove the pedal.
Remove the pedal to do the calibration.
Calibrating the Zero Point
1. 	
Position the crank arm so it is
perpendicular to the ground.
2.	Tap the [Sensors] icon in the
home screen of the SGX-
CA900.
The sensor list screen opens.
3. 	
Tap [Pedaling Monitor R] and
then [Calibration (Zero)].
4.	Tap [Start Calibration].
The calibration starts.
If the calibration is successful,
“Success” appears in the [Result] field.
If “Failure” is displayed, the sensor may
be calibrated in an unstable condition
causing the crank to be moving during
the calibration. Calibrate again with the
crank stopped.
This product has a correction
••
function for the zero point fluctuation
caused by varying temperatures. The
accuracy of this function improves
when the sensor is calibrated in
different temperatures.
This function cannot measure
correctly if you calibrate or check the
sensor before it is acclimated to the
outside temperature.
Page: 12
13
EN
Pairing
/
Calibration
Calibrating the Sensors
Checking the Zero Point
1.	Position the crank arm so it is
perpendicular to the ground.
2.	Tap [Pedaling Monitor R] in
the sensor list screen of the
SGX-CA900.
3.	Confirm the value in [Force
Preview].
Make sure that the [Tangential
Direction Force] and [Radial Direction
Force] values are as shown here.
Tangential Direction Force: 0 ± 3 N
••
Radial Direction Force: 0 ± 3 N
••
Calibration of the right side is
finished. Calibrate the left side in the
same way.
Re-attach the pedals to your bicycle
when both the left and right Zero
Point calibrations are completed.
Page: 13
14
EN
Specifications
and
support
Troubleshooting
Refer to the following suggestions if you have any problems installing or
using the product.
Refer to the Installation Manual, for more details.
I cannot pair with the Cyclocomputer in the power meter mode or pedaling mode.
■
■
Cause Solution
The battery is almost empty. If the LEDs do not light when you install the battery, the
battery is almost empty. Replace the battery with a new one.
(+) or (-) side of the battery is
installed in the opposite side.
Install the battery in the proper side (see page 9).
Pedaling monitor sensor mode is
wrong.
Change the mode and pair with the Cyclocomputer (see
page 8).
There are other wireless equipment
or microwave ovens near by.
Separate other wireless equipment or microwave ovens.
Move the sensor closer to the Cyclocomputer and pair them.
Another sensor is paired with the
Cyclocomputer.
Separate other sensors more than 10m or specify the device
number to pair the Cyclocomputer. Refer to the Installation
Manual.
I cannot pair with the Cyclocomputer in the power meter mode.
■
■
Cause Solution
Pairing between right and left
sensors fails.
Make sure that the sensor mode is in the power meter
mode. First insert the right battery and then the left battery
within 5 minutes. Make sure that left and right sensor
LEDs light green. Connect with the Cyclocomputer within 5
minutes after the LEDs illuminate.
The device number of the right
transmitter is specified.
If you are specifying the device number and searching for
the sensor in the power meter mode, specify the device
number of the left transmitter.
Page: 14
15
EN
Specifications
and
support
Troubleshooting
Zero point calibration fails.
■
■
Cause Solution
The crank is subjected to external
force or moving.
Remove the pedal from the crank and calibrate the sensor
in still condition (see page 12).
The Cyclocomputer display is not displaying normally while I am riding.
■
■
Cause Solution
Zero point calibration fails. Calibrate the zero point (see page 12).
There is a rattling noise when I am riding.
■
■
Cause Solution
Cable ties that install the sensor or
screws are loose.
Retighten the cable ties and screws.
The magnet ring is rubbing while I am riding.
■
■
Cause Solution
Foreign objects are attached to the
magnet ring and rub the transmitter
or the junction box.
Clean the transmitter, junction box, and magnet ring.
Page: 15
16
EN
Specifications
and
support
Care, Maintenance, and Storage
Use a soft dry cloth or a cloth that has been dampened and wrung out to wipe
••
dirt from the left and right transmitters, the strain gauge unit covers, the magnet
ring, and other accessories.
Do not use benzene, paint thinner, or other volatile chemicals, cleansers, or
••
chemically treated cloths. Doing so could damage the product or cause the
paint to peel off.
If you are not going to use the product for a long period of time, remove the
••
batteries.
Page: 16
17
EN
Specifications
and
support
Specifications
Weight:	 73 g
Dimensions:	 Pedaling monitor sensor (right side):
Right transmitter:
••
60.7 mm(W) × 46.9 mm(H) × 21.6 mm(D)
Junction box, Strain gauge unit cover:
••
63.3 mm(W) × 47.2 mm(H) × 9.9mm(D)
	 Pedaling monitor sensor (left side):
99.4 mm(W) × 48.2 mm(H) × 14.6 mm(D)
	 Magnet ring:
φ57.0 mm × 3.5 mm
Water resistant:	 This device has a water resistance rating of IPX-6.
Communications method (sensors):	 ANT+ wireless
Battery:	 CR2032
Battery operating time:	 Approximately 200 hours (at moderate temperature)
Operation temperature:	 -10 to 50°C
Accessories:	
Magnet ring, Magnet ring attachment for Hollowtech II,
Batteries (CR2032), Cable ties, Phillips-head screws,
User’s Manual, Important Information for the User,
Warranty Card
The battery operating time may decrease depending on the usage condition.
••
ANT+ is a Wireless Personal Network protocol with very low power
••
requirements using 2.4GHz frequency band.
For more information, visit http://www.thisisant.com/
Specifications and design are subject to change without notice.
••
Illustrations used in this manual may be different from actual appearance.
••
Page: 99
©2012 PIONEER CORPORATION.
All rights reserved.
<Z-912-021-11> EU
http://www.pioneerelectronics.com
http://www.pioneerelectronics.ca
http://www.pioneer.eu
Visit www.pioneer.eu to register your product.
Visitez www.pioneer.eu pour enregistrer votre appareil.
Si prega di visitare il sito www.pioneer.eu per registrate il prodotto.
Visite www.pioneer.eu para registrar su producto.
Zum Registrieren Ihres Produktes besuchen Sie bitte www.pioneer.eu.
Bezoek www.pioneer.eu om uw product te registreren.
PIONEER CORPORATION
1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, JAPAN
PIONEER ELECTRONICS (USA) INC.
P.O. Box 1540, Long Beach, California, 90801-1540, U.S.A.
TEL: (800) 421-1404
PIONEER ELECTRONICS OF CANADA INC.
340 Ferrier Street, Unit 2, Markham, Ontario, L3R 2Z5, Canada
TEL: 1-877-283-5901
TEL: 905-479-4411
PIONEER EUROPE NV
Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium/Belgique
TEL: +32 (0)3 570 05 11

Question & answers

There are no questions about the Pioneer SGY-PM900H90 yet.

Ask a question about the Pioneer SGY-PM900H90

Have a question about the Pioneer SGY-PM900H90 but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Pioneer SGY-PM900H90. Please make sure that you describe your difficulty with the Pioneer SGY-PM900H90 as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.