Pioneer SGX-CA900 manual

View a manual of the Pioneer SGX-CA900 below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Pioneer
  • Product: Bicycle Computer
  • Model/name: SGX-CA900
  • Filetype: PDF
  • Available languages: Dutch, English, German, French, Spanish, Italian

Table of Contents

Page: 0
EN
DE
FR
NL
IT
ES
Please read the Important Information for the User
in the product box for product warnings and other
important safety information.
Quick Start Guide
Cyclocomputer
SGX-CA900
Page: 1
2
EN
Introduction
Table of Contents
Introduction
Overview of this Manual......................3
Features...............................................4
Getting Started
Checking Accessories/Part Names
and Functions......................................5
Accessories............................................. 5
Part Names and Functions...................... 5
Charging..............................................7
Charging the Device................................ 7
Checking the Battery Level..................... 9
Installation
Installation on Your Bike....................10
Installing the Device.
.............................. 10
Installing the Sensors............................ 14
Basic Operations
Basic Operation.................................15
How to Operate the Touch Panel.......... 15
Turning the Power On/Off...................... 16
Initial Setup............................................ 16
Pairing the Sensors............................... 17
Workout.
.............................................19
Basic Flow of the Workout..................... 19
Logging Start/Stop.
................................ 19
Saving Log Data.
....................................20
Backing up Log Data to a PC................20
CycloMeter.
........................................21
Viewing the Screen and Operating....... 21
Specifications/Support
Troubleshooting.................................23
About Error Messages........................... 25
Care, Maintenance, and Storage......26
Removing the Battery............................26
Specifications....................................28
Page: 2
3
EN
Introduction
Overview of this Manual
The manuals provided with the Cyclocomputer consist of the Quick Start Guide (this
manual), the User’s Guide, and Important Information for the User.
Quick Start Guide (this manual)
The Quick Start Guide explains the basic operations of the Cyclocomputer.
Installing the device on your bike
●
●
Basic operations
●
●
User's Guide
[For American Users] http://www.pioneerelectronics.com
[For Canadian Users] http://www.pioneerelectronics.ca
[For European Users] http://www.pioneer.eu
The User's Guide explains how to operate the device in detail.
Customizing the CycloMeter (applications) display
●
●
Customizing the device settings
●
●
System settings
●
●
Firmware update etc.
●
●
Important Information for the User
Important Information for the User provides detailed information related to safety.
About the Cyclo-Sphere analyzing service
cyclo-sphere.com
You can analyze trip data in more detail by updating the log data saved in the
device with the Cyclo-Sphere.
<Browser compatibility>
Google Chrome
••
FireFox
••
Safari
••
Internet Explorer 9
••
Opera
••
For details, refer to the User's Guide.
Page: 3
4
EN
Introduction
Features
Trip Data Display (CycloMeter)
CycloMeter displays detailed trip data like speed, power, and cadence with figures
and graphs. By using one of the products in the Pedaling Monitor Sensor SGY-
PM900 series, CycloMeter can display torque efficiency and power vectors by
pedal rotation angles.
You can customize the data units, categories, and layouts that CycloMeter
displays.
Log Function
The device records a log of your ride, things like elapsed time and a wide variety of
other sensor information.
GPS tracking and location information are also logged for detailed analysis of
training sessions.
Auto Pause / Resume can be programmed to automatically sync with bike motion.
Updates
Various applications may be available in the future through firmware update. Refer
to the SGX-CA900 support page about firmware updates and adding applications.
[For American Users] http://www.pioneerelectronics.com
[For Canadian Users (ENGLISH)] http://www.pioneerelectronics.ca/POCEN/Support
[For Canadian Users (FRENCH)] http://www.pioneerelectronics.ca/POCFR/Soutien
[For European Users] http://www.pioneer.eu/eur/support/page.html
This product is designed to be used for recreational cycling and cycle training
applications only and is not designed to withstand racing conditions.
Additionally, this product is designed to be used while cycling on paved roads
only. Any damage or malfunction arising from use in racing or riding on dirt roads,
cobblestone or any other unpaved roads will not be covered by the manufacturer’s
limited warranty.
Page: 4
5
EN
Getting
Started
Checking Accessories/Part Names and Functions
Accessories
This product contains the following
parts.
Main unit
••
Bracket / bolt x 1
••
USB cable
••
Strap
••
Quick Start Guide (this manual)
••
Important Information for the User
••
Warranty Card
••
Part Names and Functions
Front View
	 Display (touch panel)
Touch the screen to select an item or
switch screens.
	 [START/STOP] button
Press the [START/STOP] button to start
or stop logging. Press the [START/STOP]
button for more than two seconds to turn
the power on or off.
	 (BACK) button
Press the (BACK) button to go back
to the previous screen. Press the
(BACK) button on the main screen of the
applications to display the home screen of
the device.
Page: 5
6
EN
Getting
Started
Checking Accessories/Part Names and Functions
	 [LAP] button
Press the [LAP] button during logging to
record a lap.
Press the [LAP] button for more than one
second to reset the timer and record the
log.
For details, refer to page 16.
	 (MENU) button
Press the (MENU) button to display
the menu screen. Press the (MENU)
button for more than one second to lock
or unlock the touch panel.
	 Bracket installation slot
Use the bracket installation slot to attach
the device to the bracket fixed to your
bike.
	 USB connector
Connect the USB cable to charge the
device or transfer data to your PC.
	 USB connector cover
Securely close the USB connector
cover when not charging the battery or
transferring data to your PC.
Back View
	 Speaker
Provides audible alerts and input
confirmation.
	 Air pressure sensor
Do not block the sensor or the device will
not operate properly.
Page: 6
7
EN
Getting
Started
Charging
The device is not charged at the time of purchase. Charge the device with
the provided USB cable before using it.
Charging the Device
1	 Open the USB connector cover.
2	 Connect the provided USB
cable to the USB connector on
the bottom of the device.
3	 Turn your PC on and connect
the USB cable to an open USB
port on your PC.
The device starts charging.
The device turns off
••
To Power Up
••
Press the [START/STOP] button for
more than 2 seconds to turn on the
device for use.
Press the [START/STOP] button for
more than 2 seconds again to turn off
the device. Charging time is shorter if
the device is turned off.
	 Charging icon
: Charging
: Fully charged
Page: 7
8
EN
Getting
Started
Charging
It takes about 4 hours to charge fully
••
(normal charging). The device will
automatically stop charging once the
battery is 100% fully charged.
When the device is turned off, the
••
screen turns dark after 5 seconds.
Touch the touch panel to check the
battery level.
For the sake of safety, the device
••
will not charge when outside
the temperature range of 0°C-
40°C. When the devices internal
temperature is too high, full charge
may not be achieved. In this case,
turn off the device, allow it to cool
down and then recharge it.
Connect the provided USB cable
••
directly to the USB port of your PC.
If the device is connected via a USB
hub, it may not charge to full capacity.
Make sure that the USB output of
your PC accepts 5V/500 mA.
Do not unplug the USB cable, shut
••
down the PC or use sleep mode
while the device is transferring data
as it may corrupt the data in the
device.
4	 Unplug the USB cable from the
USB port.
Once data transfer is complete and the
battery is fully charged, disconnect the
USB cable from the PC first, then from
the device.
5	 Close the USB connector cover.
To ensure water resistant performance,
firmly close the USB cover.
Page: 8
9
EN
Getting
Started
Charging
Checking the Battery Level
You can check the battery level with
the battery icon on the status bar of the
home screen and the menu screen.
	 Battery icon
When the battery is running low on
••
power, a warning screen will appear
"Battery Level Decreasing." If not
recharged, the device will shut down
automatically.
Operating Time Indicator
A fully charged battery can run for
approximately 12 hours (brightness 5).
Operating times may vary depending
••
on the operating conditions.
If the operating time is abnormally
••
short, the battery may need to be
replaced. For details, please visit our
website.
Page: 9
10
EN
Installation
Installation on Your Bike
Mount the Cyclocomputer on your bike.
	Caution
When you mount the Cyclocomputer on your bike, be sure your bike is in a stable
••
position to prevent it from falling.
Installing the Device
1	 Remove the bolt from the bracket.
Remove the bolt from the bracket
using a 3 mm hex wrench.
	 hex wrench
Be careful not to lose the removed bolt.
••
2	 Mount the bracket on the handlebar
of your bike.
Be careful not to pinch your finger
••
when mounting the bracket on the bike.
Page: 10
11
EN
Installation
Installation on Your Bike
3	 Secure the bracket with the bolt.
Apply anti-seize compound like a
grease to the bolt.
Adjust the bracket horizontally from
the stem, insert the bolt into the hole
and tighten lightly.
4	 Check the position of the fixed
lever on the bracket.
Check the red circle on the right side
of the fixed lever. If you do not see it,
the device cannot be attached.
If the red circle is hidden, push the
fixed lever into the right.
When the fixed lever is on this
position, the bracket can be
mounted.
	 Fixed lever
5	 Attach the strap to the device.
Lace the strap through the device
holes for the strap.
Page: 11
12
EN
Installation
Installation on Your Bike
6	 Attach the device to the
bracket.
Fasten the strap to the handlebars. Set
the tip of the bracket in the bracket slot
on the device and push the device until
it clicks.
7	 Push the fixed lever into the
left.
Push the fixed lever until the red circle
on the right side is hidden.
Push the fixed lever to
the direction of the arrow.
Before riding with the device, make
••
sure that the fixed lever red circle is
hidden.
Page: 12
13
EN
Installation
Installation on Your Bike
8	 Adjust the angle of the device,
and then tighten the bracket.
If the device is not aligned to the center
of the handlebars or not horizontal to
the stem, loosen the bolt and realign
the bracket.
After adjusting the angle, clamp the
temporary joint bolt and tighten the
bracket.
Use a tool that can measure the torque
to tighten the bolts.
Tightening torque: 1.2 N·m
••
Front view
••
Side view
••
Page: 13
14
EN
Installation
Installation on Your Bike
To detach the device
To detach the device from the
handlebar mount, press the fixed lever
to the right, a red circle will appear next
to the device when unlocked.
Pull back on the unlock lever on the
bracket and lift the device.
	 Fixed lever
	 Unlock lever
Installing the Sensors
This device is compatible with ANT+™
sensors mounted on your bike.
Refer to the users manual of your ANT+
sensors for installation instructions.
This product is ANT+™ certified.
Visit http://www.thisisant.com/directory/ for
a list of compatible products and apps.
Page: 14
15
EN
Basic
Operations
Basic Operation
How to Operate the Touch Panel
The display of this device is a touch
panel for direct operation.
Tap
Quickly touch an item
on the screen to select
or confirm it.
Swipe
Move your finger in a
vertical or horizontal
direction on the screen.
Do this to switch
screens or scroll.
Long touch
Touch and hold an item
on the screen.
Do this to open the pop-
up menus.
Drag
To move an item on the
screen, simply touch
the item with your finger
and move it to the new
location.
Precautions when using the touch panel
Do not use a hard or sharp object to
••
operate the touch panel, doing so
may damage it.
Do not use commercially available
••
protective sheets or films as they
may interfere with normal operation
and cause the device not to operate
correctly.
You can op
•• erate the touch panel while
wearing gloves. Apply slightly more
pressure than usual.
Page: 15
16
EN
Basic
Operations
Basic Operation
Turning the Power On/Off
Turn the device on
1	 Press the [START/STOP] button
for at least two seconds.
The CycloMeter will start after the
opening message has been displayed.
First time power up will automatically
••
display the setup screen.
Turn the device off
1	 Press the [START/STOP] button
for at least two seconds.
A power down message appears and
the system will power off.
Initial Setup
When you turn the device on for the
first time, the Initial Setup screen is
displayed.
You can change the settings at any
••
time.
1	 Tap [Language] and select a
language.
Drag the screen and tap the language
that you want to display.
The following steps explain the
procedure when you select [English].
Page: 16
17
EN
Basic
Operations
Basic Operation
2	 Tap [Date & Time] and set the
date and the time.
Touch the (BACK) button after
you've completed your settings.
Time Zone Select a time zone.
Date Enter the date.
Time Enter the time.
24-Hour
Format
Check the box to display time
in 24 hour format.
Date
Format
Select the date format.
3	 Tap [Close].
The Initial Setup is finished and
CycloMeter starts.
Pairing the Sensors
Pair the SGY-PM900 Pedaling Monitor
Sensor or other ANT+ sensors to the
device.
	Before pairing the sensors
Make sure that the sensors that you
••
want to pair are activated.
If more than one sensor is activated,
••
bring the device close to the sensor
or specify the device number to pair.
Refer to the User’s Guide about how
to specify the device number.
If you use the speed sensor
••
sold separately and the wheel
circumference is different, set the
wheel circumference. The wheel
circumference is set to 2096 mm by
default. For details, refer to the Users
Guide.
Page: 17
18
EN
Basic
Operations
Basic Operation
1	 Mount the sensors on your bike.
For details about how to mount sensors,
refer to the user's manual of your
sensors.
2	 Press the (MENU) button
on the main screen of the
CycloMeter.
3	 Tap [Sensors] - [Connect New].
4	 Enter your sensors’ information.
Tap [Device Type] to select the type of
sensor(s) you wish to pair.
Types of compatible sensors:
SpeedSensor
••
CadenceSensor
••
Speed & Cadence Sensor
••
Heart Rate Monitor
••
PowerMeter
••
Pedaling Monitor L
••
Pedaling Monitor R
••
5	 Tap [Search].
The message "Searching Please wait."
appears. If the sensors are paired,
the information from the sensors is
displayed.
6	 Confirm the information from
the sensors.
Confirm that “OK” is displayed in the
[Error Rate] area.
If “NG” is displayed in the [Error
••
Rate] area, the sensor information
is not received properly due to a
communication error. Make sure that
the sensor is activated, bring the
device closer to the sensor and try
pairing again.
You may not pair with the sensor
••
due to the influence of the 2.4 GHz
frequency band. If “NG” is displayed
even if the device is moved closer
to the sensor and paired with it, try
again someplace where there is no
interference from microwaves, radio
waves, or wireless equipment.
Page: 18
19
EN
Basic
Operations
Workout
This device is designed to log a variety of sensor data as well as GPS location data
during your workout. In this device, the beginning of the training to the end of
the training is called “ 
workout”.
Basic Flow of the Workout
[Start]
Lap1 Lap2 Lap3 Lap3 Lap4 Lap5
[Lap] [Lap]
[Stop]
[Start]
[Lap] [Lap]
[Stop]
[Lap]
(1 sec.)
Workout
Timer
Resetting
Logging Start/Stop
1	 Press the [START/STOP] button to start logging.
[Timer Started] is displayed.
2	 Press the [START/STOP] button to stop logging.
[Timer Stopped] is displayed.
You can start and stop logging at any time while the device is turned on except while
••
the device is connected to a PC or during setting initialization.
If the [LAP] button is pressed during logging, a lap is recorded.
••
Page: 19
20
EN
Basic
Operations
Workout
Saving Log Data
After your have completed your ride,
reset the timer to save the log data to
the built-in flash memory.
1	 Press the [LAP] button for more
than one second.
The log data is saved, and the timer is
reset.
The log data is saved in the “..\Pioneer\
Log” folder.
Log data is not saved to the built-in
••
flash memory until the timer is reset.
Backing up Log Data to a PC
You can transfer the log data in the built-
in flash memory of the device to your
PC.
Transferred data can be analyzed
using the Pioneer™ Cyclo-Sphere web
service.
1	 Connect the device to your PC
with the provided USB cable.
The PC recognizes the device as a
mass storage device.
Refer to page 7 about connecting the
••
device and your PC.
2	 Select the data you want to
transfer, and then save it
anywhere on the PC.
The log data is saved in the “..\Pioneer\
Log” folder.
Save it anywhere on the PC.
The file name is the date and hour that
the training log started.
(e.g., LOG_2013_04_01_08_20.db)
Page: 20
21
EN
Basic
Operations
CycloMeter
CycloMeter is the main application on this device. It provides the trip data of
your bike ride. When the device is turned on, CycloMeter is activated first.
For details about CycloMeter, refer to the User’s Guide.
Viewing the Screen and
Operating
The CycloMeter screen consists of
pages and data fields.
A variety of information is displayed as
a data field on the page.
	 Data Fields
Display the information name, type, unit etc.
You can customize the type of data
••
fields and their layout on the pages.
For further details, refer to the
User's Guide.
Changing Pages
Swipe the screen right or left to change
the pages.There are 6 pages by default.
Changing Brightness
Swipe the screen up or down to adjust
the brightness. 10 levels are provided.
Page: 21
22
EN
Basic
Operations
CycloMeter
Zooming Data Fields
Tap data field to zoom in. Tap it again or
press the (BACK) button to return to
the page display.
When the [
•• ] mark is displayed
on the right, left, top or bottom of
the screen, swipe the screen in the
direction of the mark to change the
units and kinds of data fields.
Page: 22
23
EN
Specifications/
Support
Troubleshooting
If you have problems with your device, check the following items. If you
cannot find the problem, refer to the User’s Guide.
If a solution to your problem cannot be found here, contact your dealer.
Will not power up
■
■
Cause Solution
The battery is not charged. Charge the battery.
The temperature of the device may
be too high or low.
Wait until the device is within standard operating
temperature ranges.
The operation button or the touch panel is not responding.
■
■
Cause Solution
There are numerous possibilities for
non-operation.
Push the [START/STOP] button and [LAP] button at the
same time for more than 10 seconds to try the forced reset.
After the forced reset, set the [Date & Time]. (page 17)
The log data and setting data will not be deleted by a forced
reset.
Do not do a forced reset if the device has no malfunction.
The touch panel is not responding.
■
■
Cause Solution
The touch panel cannot sense your
input.
The device has a resistive touch panel.
Resistive touch panels require a slightly stronger touch than
capacitive touch panels.
The touch panel is locked. Push and hold the (MENU) button to unlock. When
unlock is displayed, it is unlocked.
Page: 23
24
EN
Specifications/
Support
Troubleshooting
You do not know how to initialize.
■
■
Cause Solution
- Tap [System]-[Setting Manager]-[Initialize] from the home
screen to initialize. Refer to the User’s Guide for details. If
you initialize, the ride log data will be deleted. Save the data
to a PC before initialization.
Sensor information is not displayed.
■
■
Cause Solution
The sensor is not paired. Check that the sensor is paired to the device properly. If you
use the pedaling monitor sensor SGY-PM900, refer to the
User’s Manual of the SGY-PM900 and Installation Manual.
The sensor battery is almost empty. Replace the battery with a new one. Refer to the user’s
manual of the sensor about how to replace the battery.
The latitude and longitude are not displayed.
■
■
Cause Solution
Reception is poor when inside a
room or in areas surrounded by
mountains.
It may take a few minutes to display
the latitude and longitude when you
use the device the first time.
Use the device outside in an open area.
When you use the device for the first time, you may need to
allow extra time.
Page: 24
25
EN
Specifications/
Support
Troubleshooting
About Error Messages
Message Cause Solution
Outside Charging
Temperature Range
You tried to charge the battery
outside the charging temperature
range of 0°C to 40°C.
You cannot charge the battery
outside the charging temperature
range of 0°C to 40°C for safety
reasons. The device may not have
charged even though the outside
temperature is below 40°C. This
happens because the device heats
up when the battery is charging.
Charge the battery in the charging
temperature range of 0°C to 40°C.
If you turn off the device when the
battery is charging, the temperature
does not rise. (page 7)
Storage space is
getting low.
Please remove
unnecessary data.
There is not enough free memory in
the device system area.
Transfer the ride log data to a PC.
Delete the data in the built-in flash
memory from the PC. (page 20)
Battery level is low.
Please connect power
supply.
Updating will start
after fully charged.
The device can be updated only
when it is fully charged to prevent
update failures.
Charge the battery of the device.
When it is finished, the device starts
updating automatically.
Page: 25
26
EN
Specifications/
Support
Make sure that the power of the device is turned off before cleaning.
Use a commercial cleaning cloth to clean the display.
••
Use a soft dry cloth or a cloth that has been dampened and wrung out to wipe
••
the device or the bracket.
Do not use benzene, paint thinner, or other volatile chemicals, cleansers, or
••
chemically treated cloths. Doing so could damage the product or cause the
paint to peel.
Discharge the battery and store the device in a cool and dark place if being
••
stored for a long period of time.
Removing the Battery
Remove the lithium-ion battery by the
following procedures to dispose of the
device.
Please use caution when removing
••
the battery. Please never attempt to
disassemble the device except when
you dispose of the battery.
1.	Remove the screw of the device.
Use a Phillips-head screwdriver and
remove the screws (6) from the back of
the device.
Care, Maintenance, and Storage
2.	Remove the back cover of the
device and the lithium-ion
battery cable from the substrate.
3.	Remove the lithium-ion battery
from the back cover.
Remove the tape that holds the lithium-
ion battery to remove the battery.
Be careful not to damage the lithium-
ion battery.
Page: 27
28
EN
Specifications/
Support
Specifications
Weight:	 126 g
Dimensions:	 70 mm (W) x 85 mm (H) x 21.5 mm (D)
Connector:	 miniUSB
Water resistant:	 This device has a water resistance rating of IPX-6.
Communications method (sensors):	 ANT+ wireless
Positioning system (latitude, longitude):	 GPS
Positioning system (altitude):	 Air pressure sensor
Display:	 QVGA 320x240 pixel, horizontal 2.2 inch outdoor type
	 Touch panel (resistive touch display)
Built-in flash memory:	 8 GB (user available capacity 6 GB)
Operation temperature:	 -10 to 50°C
Power requirement:	 DC 5V
Battery type:	 Lithium-ion battery
Battery operating time:	 Approximately 12 hours (brightness 5)
Charging time:	 Approximately 4 hours (normal charge)
Accessories:	
Bracket, Bolt, USB cable, Strap, Quick Start Guide,
Warranty card, Important Information for the User
The battery operating time may decrease depending on the operating conditions.
••
ANT+ is a wireless personal network protocol with very low power requirements
••
using the 2.4 GHz frequency band.
For more information, visit http://www.thisisant.com/
Specifications and design are subject to change without notice.
••
Illustrations used in this manual may be different from the actual device.
••
Page: 159
©2012 PIONEER CORPORATION.
All rights reserved.
<Z-912-015-11> EU
http://www.pioneerelectronics.com
http://www.pioneerelectronics.ca
http://www.pioneer.eu
Visit www.pioneer.eu to register your product.
Visitez www.pioneer.eu pour enregistrer votre appareil.
Si prega di visitare il sito www.pioneer.eu per registrate il prodotto.
Visite www.pioneer.eu para registrar su producto.
Zum Registrieren Ihres Produktes besuchen Sie bitte www.pioneer.eu.
Bezoek www.pioneer.eu om uw product te registreren.
PIONEER CORPORATION
1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, JAPAN
PIONEER ELECTRONICS (USA) INC.
P.O. Box 1540, Long Beach, California, 90801-1540, U.S.A.
TEL: (800) 421-1404
PIONEER ELECTRONICS OF CANADA INC.
340 Ferrier Street, Unit 2, Markham, Ontario, L3R 2Z5, Canada
TEL: 1-877-283-5901
TEL: 905-479-4411
PIONEER EUROPE NV
Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium/Belgique
TEL: +32 (0)3 570 05 11

Question & answers

There are no questions about the Pioneer SGX-CA900 yet.

Ask a question about the Pioneer SGX-CA900

Have a question about the Pioneer SGX-CA900 but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Pioneer SGX-CA900. Please make sure that you describe your difficulty with the Pioneer SGX-CA900 as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.