Pioneer PD-30AE manual

View a manual of the Pioneer PD-30AE below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Pioneer
  • Product: CD-player
  • Model/name: PD-30AE
  • Filetype: PDF
  • Available languages: German, Italian, English, French, Spanish

Table of Contents

Page: 0
En
COMPACT DISC PLAYER
PD-30AE
PD-10AE
Instruction Manual
Thank you for purchasing Pioneer product. Please read this
manual carefully before making any connections or using
this product. By following these instructions, you’ll get the
best audio performance and the most listening pleasure
from your Pioneer product. Keep this manual for future
reference.
Getting Started............................En-2
Connections.............................. En-13
Basic Operation....................... En-15
Disc Playback........................... En-16
Various Playback Modes..... En-21
Setting for MP3 ........................ En-24
Troubleshooting...................... En-26
Specifications........................... En-27
SN229402408_PD-30AE_En.book 1 ページ 2016年7月28日 木曜日 午前8時16分
Page: 1
En-2
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instruc-
tions.
8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other appa-
ratus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are pro-
vided for your safety. If the provided plug does not
fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
11. Only use attachments/accessories specified by
the manufacturer.
12. Use only with the cart,
stand, tripod, bracket, or
table specified by the man-
ufacturer, or sold with the
apparatus. When a cart is
used, use caution when
moving the cart/apparatus
combination to avoid injury
from tip-over.
13. Unplug this apparatus during lightning storms
or when unused for long periods of time.
14. Refer all servicing to qualified service person-
nel. Servicing is required when the apparatus
has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or
has been dropped.
15. Damage Requiring Service
Unplug the apparatus from the wall outlet and
refer servicing to qualified service personnel
under the following conditions:
A. When the power-supply cord or plug is damaged,
B. If liquid has been spilled, or objects have
fallen into the apparatus,
C. If the apparatus has been exposed to rain or
water,
D. If the apparatus does not operate normally
by following the operating instructions.
Adjust only those controls that are covered
by the operating instructions as an improper
adjustment of other controls may result in
damage and will often require extensive
work by a qualified technician to restore the
apparatus to its normal operation,
E. If the apparatus has been dropped or dam-
aged in any way, and
F. When the apparatus exhibits a distinct
change in performance this indicates a need
for service.
16. Object and Liquid Entry
Never push objects of any kind into the appara-
tus through openings as they may touch dan-
gerous voltage points or short-out parts that
could result in a fire or electric shock.
The apparatus shall not be exposed to dripping
or splashing and no objects filled with liquids,
such as vases shall be placed on the appara-
tus.
Don’t put candles or other burning objects on
top of this unit.
17. Batteries
Always consider the environmental issues and
follow local regulations when disposing of bat-
teries.
18. If you install the apparatus in a built-in installa-
tion, such as a bookcase or rack, ensure that
there is adequate ventilation.
Leave 20 cm (8") of free space at the top and
sides and 10 cm (4") at the rear. The rear edge
of the shelf or board above the apparatus shall
be set 10 cm (4") away from the rear panel or
wall, creating a flue-like gap for warm air to
escape.
WARNING:
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPARATUS TO RAIN OR MOISTURE.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). NO
USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the
user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may
be of sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
AVIS
PORTABLE CART WARNING
S3125A
SN229402408_PD-30AE_En.book 2 ページ 2016年7月28日 木曜日 午前8時16分
Page: 2
En-3
Precautions
1. Recording Copyright—Unless it’s for personal
use only, recording copyrighted material is illegal
without the permission of the copyright holder.
2. AC Fuse—The AC fuse inside the unit is not user-
serviceable. If you cannot turn on the unit, contact
the dealer from whom you purchased this unit.
3. Care—Occasionally you should dust the unit all over
with a soft cloth. For stubborn stains, use a soft cloth
dampened with a weak solution of mild detergent and
water. Dry the unit immediately afterwards with a
clean cloth. Don’t use abrasive cloths, thinners, alco-
hol, or other chemical solvents, because they may
damage the finish or remove the panel lettering.
4. Power
WARNING
BEFORE PLUGGING IN THE UNIT FOR THE
FIRST TIME, READ THE FOLLOWING SEC-
TION CAREFULLY.
AC outlet voltages vary from country to country.
Make sure that the voltage in your area meets the
voltage requirements printed on the unit’s rear panel
(e.g., AC 220-240 V, 50/60 Hz or AC 120 V, 60 Hz).
The power cord plug is used to disconnect this unit
from the AC power source. Make sure that the plug
is readily operable (easily accessible) at all times.
Pressing the [STANDBY/ON] button to select
Standby mode does not fully disconnect from
the mains. If you do not intend to use the unit
for an extended period, remove the power cord
from the AC outlet.
5. Preventing Hearing Loss
Caution
Excessive sound pressure from earphones and
headphones can cause hearing loss.
6. Batteries and Heat Exposure
Warning
Batteries (battery pack or batteries installed)
shall not be exposed to excessive heat as sun-
shine, fire or the like.
7. Never Touch this Unit with Wet Hands—Never
handle this unit or its power cord while your hands
are wet or damp. If water or any other liquid gets
inside this unit, have it checked by the dealer from
whom you purchased this unit.
8. Handling Notes
• If you need to transport this unit, use the
original packaging to pack it how it was when
you originally bought it.
• Do not leave rubber or plastic items on this
unit for a long time, because they may leave
marks on the case.
• This unit’s top and rear panels may get warm
after prolonged use. This is normal.
• If you do not use this unit for a long time, it
may not work properly the next time you turn
it on, so be sure to use it occasionally.
• When you’ve finished using this unit, remove
all discs and turn off the power.
9. Installing this Unit
• Install this unit in a well-ventilated location.
• Ensure that there’s adequate ventilation all
around this unit, especially if it’s installed in an
audio rack. If the ventilation is inadequate, the
unit may overheat, leading to malfunction.
• Do not expose this unit to direct sunlight or heat
sources, because its internal temperature may
rise, shortening the life of the optical pickup.
• Avoid damp and dusty places, and places subject
to vibrations from loudspeakers. Never put the
unit on top of, or directly above a loudspeaker.
• Install this unit horizontally. Never use it on
its side or on a sloping surface, because it
may cause a malfunction.
• If you install this unit near a TV, radio, or
VCR, the picture and sound quality may be
affected. If this occurs, move this unit away
from the TV, radio, or VCR.
10. Moisture Condensation
Moisture condensation may damage this unit.
Read the following carefully:
Moisture may condense on the lens of the opti-
cal pickup, one of the most important parts
inside this unit.
• Moisture condensation can occur in the fol-
lowing situations:
– The unit is moved from a cold place to a
warm place.
– A heater is turned on, or cold air from an
air conditioner is hitting the unit.
– In the summer, when this unit is moved from an
air conditioned room to a hot and humid place.
– The unit is used in a humid place.
• Do not use this unit when there’s the possibil-
ity of moisture condensation occurring. Doing
so may damage your discs and certain parts
inside this unit.
If condensation does occur, unplug the power
cord and leave the unit for two to three hours in
the room temperature.
This unit contains a semiconductor laser system and
is classified as a “CLASS 1 LASER PRODUCT”. So,
to use this model properly, read this Instruction Man-
ual carefully. In case of any trouble, please contact
the store where you purchased the unit.
To prevent being exposed to the laser beam, do
not try to open the enclosure.
CAUTION:
CLASS 1M VISIBLE AND INVISIBLE LASER
RADIATION WHEN OPEN. DO NOT VIEW
DIRECTLY WITH OPTICAL INSTRUMENTS.
THIS PRODUCT UTILIZES A LASER. USE OF
CONTROLS OR ADJUSTMENTS OR PERFOR-
MANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
SN229402408_PD-30AE_En.book 3 ページ 2016年7月28日 木曜日 午前8時16分
Page: 3
En-4
Precautions-Continued
The label on the right is
applied on the rear panel.
1. This unit is a CLASS 1
LASER PRODUCT and
employs a laser inside the cabinet.
2. To prevent the laser from being exposed, do not remove
the cover. Refer servicing to qualified personnel.
For U.S. models
FCC Information for User
CAUTION:
The user changes or modifications not expressly
approved by the party responsible for compliance
could void the user’s authority to operate the
equipment.
NOTE:
This equipment has been tested and found to com-
ply with the limits for a Class B digital device, pur-
suant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions, may
cause harmful interference to radio communica-
tions. However, there is no guarantee that interfer-
ence will not occur in a particular installation. If this
equipment does cause harmful interference to
radio or television reception, which can be deter-
mined by turning the equipment off and on, the
user is encouraged to try to correct the interfer-
ence by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is con-
nected.
• Consult the dealer or an experienced radio/TV
technician for help.
For Canadian Models
NOTE: CAN ICES-3 B/NMB-3 B
For models having a power cord with a polarized
plug:
CAUTION: TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT.
Modèle pour les Canadien
REMARQUE: CAN ICES-3 B/NMB-3 B
Sur les modèles dont la fiche est polarisée:
ATTENTION: POUR ÉVITER LES CHOCS
ÉLECTRIQUES, INTRODUIRE LA LAME LA
PLUS LARGE DE LA FICHE DANS LA BORNE
CORRESPONDANTE DE LA PRISE ET
POUSSER JUSQU’AU FOND.
For British models
Replacement and mounting of an AC plug on the
power supply cord of this unit should be performed
only by qualified service personnel.
IMPORTANT
The wires in the mains lead are coloured in accor-
dance with the following code:
Blue: Neutral
Brown: Live
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured
markings identifying the terminals in your plug,
proceed as follows:
The wire which is coloured blue must be con-
nected to the terminal which is marked with the let-
ter N or coloured black.
The wire which is coloured brown must be con-
nected to the terminal which is marked with the let-
ter L or coloured red.
IMPORTANT
The plug is fitted with an appropriate fuse. If the
fuse needs to be replaced, the replacement fuse
must approved by ASTA or BSI to BS1362 and
have the same ampere rating as that indicated on
the plug. Check for the ASTA mark or the BSI mark
on the body of the fuse.
If the power cord’s plug is not suitable for your
socket outlets, cut it off and fit a suitable plug. Fit a
suitable fuse in the plug.
For European Models
We declare, under our sole responsibility, that this
product complies with the standards:
– Safety
– Limits and methods of measurement of radio
disturbance characteristics
– Limits for harmonic current emissions
– Limitation of voltage changes, voltage fluctua-
tions and flicker
– RoHS Directive, 2011/65/EU
WEEE
http://www.onkyo.com/manual/weee/weee.pdf
Manufacturer:
Onkyo & Pioneer
Corporation
2-3-12 Yaesu, Chuo-ku,
Tokyo
104-0028 JAPAN
EU Representative’s:
Pioneer Europe NV
Haven 1087,
Keetberglaan 1, 9120
Melsele, Belgium
http://www.pioneer.eu
SN229402408_PD-30AE_En.book 4 ページ 2016年7月28日 木曜日 午前8時16分
Page: 4
En-5
Supplied Accessories
Make sure you have the following accessories
* In catalogs and on packaging, the letter at the end of
the product name indicates the color. Specifications
and operations are the same regardless of color.
Features
• 24bit 192KHz D/A converter
• MP3 playback
• 25-track memory playback
• SR compatible remote control (PD-30AE only)
• Auto standby
• Coaxial and optical digital audio output (PD-
30AE only)
• Random playback
• Random repeat playback
• Headphones output (PD-30AE only)
Remote controller RC-947C and two batteries
(R03/AAA)
Audio cable (80 cm)
Power cord (PD-30AE only)
SN229402408_PD-30AE_En.book 5 ページ 2016年7月28日 木曜日 午前8時16分
Page: 5
En-6
Contents
Precautions......................................................... 3
Supplied Accessories........................................ 5
Features .............................................................. 5
Getting to Know the CD Player......................... 7
Front Panel ....................................................... 7
Display.............................................................. 8
Rear Panel........................................................ 9
Remote Controller........................................... 10
Installing the Batteries .................................... 11
Aiming the Remote Controller......................... 11
Disc Notes......................................................... 12
Connecting the CD Player............................... 13
Audio Connections.......................................... 13
Using centralized control with other Pioneer
components (PD-30AE only)........................ 14
Connecting the Power Cord............................ 14
Basic Operation................................................ 15
Turning On CD Player .................................... 15
Setting Auto Standby (ASb)............................ 15
Changing the Display Brightness.................... 15
Using Headphones ......................................... 15
Disc Playback................................................... 16
Using the Remote Controller .......................... 17
Displaying CD Information .............................. 17
Selecting Files (MP3 CDs).............................. 18
Selecting Files in Navigation Mode................. 18
Selecting Files in All Folder Mode .................. 19
Selecting a Folder during Playback (Search
Mode) ........................................................... 19
Displaying MP3 Information............................ 20
Various Playback Modes................................. 21
Random Playback........................................... 21
Memory Playback (For Audio CDs) ................ 21
Memory Playback (For MP3 CDs).................. 22
Repeat Playback............................................. 23
Setting for MP3................................................. 24
Setting MP3 Preferences................................ 24
Troubleshooting............................................... 26
Specifications................................................... 27
SN229402408_PD-30AE_En.book 6 ページ 2016年7月28日 木曜日 午前8時16分
Page: 6
En-7
Getting to Know the CD Player
1. Í STANDBY/ON button (15)
Press to turn on or standby the PD-30AE.
2. Disc tray (16)
The CD is loaded here.
3. Open/Close [<] button (16)
Press to open and close the disc tray.
4. Play [1] button (16 – 19, 21, 22)
Press to start playback.
5. Pause [;] button (16, 17)
Press to pause playback.
6. Stop [∫] button (16 – 19, 24)
Press to stop playback.
7. Remote control sensor (11)
Receives control signals from the remote
controller.
8. PHONES jack (15)
This is a standard stereo jack for connecting
stereo headphones.
9. PHONES LEVEL knob (15)
Use to control the phones level.
Turn the knob clockwise to increase the
phones level and counterclockwise to decrease
it.
10. Display (8)
See next page.
11. [:22]/[119] buttons (16 – 19, 21)
Press to select the previous or next track.
Hold down the buttons to fast-reverse or fast-
forward during playback.
1. Í STANDBY/ON button (15)
Press to turn on or standby the PD-10AE.
2. Disc tray (16)
The CD is loaded here.
3. Open/Close [<] button (16)
Press to open and close the disc tray.
4. Play [1] button (16 – 19, 21, 22)
Press to start playback.
5. Pause [;] button (16, 17)
Press to pause playback.
6. Stop [∫] button (16 – 19, 24)
Press to stop playback.
7. Remote control sensor (11)
Receives control signals from the remote
controller.
8. Display (8)
See next page.
9. [:22]/[119] buttons (16 – 19, 21)
Press to select the previous or next track.
Hold down the buttons to fast-reverse or fast-
forward during playback.
Front Panel
1 2 3 4 5 6
7 8 9 10 11
PD-30AE
1 2 3 4 5 6
7 8 9
PD-10AE
SN229402408_PD-30AE_En.book 7 ページ 2016年7月28日 木曜日 午前8時16分
Page: 7
En-8
Getting to Know the CD Player-Continued
1. 1; indicators
The 1 indicator lights up for playback.
The ; indicator lights up while playback is
paused.
2. MP3 indicator
Lights up when an MP3 CD is loaded.
3. FOLDER indicator
Lights up when folder playback is selected.
4. FILE indicator
Lights up when an MP3 file number is being
displayed.
5. TRACK indicator
Lights up when a CD track number is being
displayed.
6. Playback mode indicators
MEMORY lights up when memory playback is
selected.
RANDOM lights up when random playback is
selected.
REPEAT lights up when repeat playback is
selected for all tracks.
REPEAT 1 lights up when repeat playback is
selected for one track.
7. Message area
Various information is displayed here.
8. TITLE, ARTIST, and ALBUM indicators
TITLE lights up when the title (ID3 tag) of an
MP3 track is being displayed.
ARTIST lights up when the artist name from an
MP3 track (ID3 tag) is being displayed.
ALBUM lights up when the album name from
an MP3 track (ID3 tag) is being displayed.
9. DISC, TOTAL indicators
These indicators light up when the total disc
time or track time is being displayed.
10. REMAIN indicator
This indicator lights up when the remaining disc
time or track time is being displayed.
Display
1 2 6
3 4 5
9
7 8 10
SN229402408_PD-30AE_En.book 8 ページ 2016年7月28日 木曜日 午前8時16分
Page: 8
En-9
Getting to Know the CD Player-Continued
1. ANALOG OUT jacks (13)
These analog audio outputs can be connected
to an amplifier’s analog inputs by using the
supplied audio cable.
2. CONTROL IN/OUT jacks (14)
By connecting Pioneer brand components with
control jacks, you can centralize control of the
devices using the remote controller of this unit.
3. DIGITAL OUT OPTICAL/ COAXIAL jacks
These two digital audio outputs can be
connected to a digital audio input on an
amplifier or recorder.
4. AC IN (14)
The supplied power cord is connected.
1. ANALOG OUT jacks (13, 14)
These analog audio outputs can be connected
to an amplifier’s analog inputs by using the
supplied audio cable.
2. Power code (14)
Rear Panel
1 2 3 4
PD-30AE
1 2
PD-10AE
SN229402408_PD-30AE_En.book 9 ページ 2016年7月28日 木曜日 午前8時16分
Page: 9
En-10
Getting to Know the CD Player-Continued
The page numbers in parentheses show where you can find the main explanation for each item.
1. Í STANDBY/ON button (15)
Press to turn on or standby the PD-30AE/PD-
10AE.
2. DIMMER button (15)
Press to adjust the display brightness.
3. Pause [;] button (16, 17)
Press to pause playback.
4. RANDOM button (21)
Select the Random playback mode.
5. Play [1] button (16 – 19, 21, 22)
Press to start playback.
6. [:]/[9] buttons (16, 17, 19, 21)
Press to select the previous or next track.
7. Stop [∫] button (16, 18, 19, 24)
Press to stop playback.
8. / // buttons (15, 18, 19, 21, 22, 24)
Press the Arrow buttons to configure various
settings, and then press the ENTER button to
set them.
These buttons can be also used to select a
track.
9. ENTER button (15, 19, 21 – 24)
Press to set a selected preference.
10. SEARCH button (19)
For MP3 CDs, this button is used to search and
select a file number or a folder number.
11. SETUP button (24)
Press to access various settings.
12. Number buttons (17, 19)
Use to enter track numbers.
13. Open/Close [<] button (16)
Press to open and close the disc tray.
14. DISPLAY button (17, 20)
Press to change the displayed information.
15. REPEAT button (23)
Select the repeat playback or 1-repeat
playback mode.
16. [22]/[11] buttons (17, 21)
Hold down to fast-reverse or fast-forward
during playback.
17. MEMORY button (21, 22)
Select the Memory playback mode.
18. CLEAR button (21)
Use to clear any numbers that have been
entered during numeric input. When making a
memory setting, the selected track is erased.
Remote Controller
1 13
15
11
4
2
17
10
7
16
5
9
18
12
8
6
3
14
SN229402408_PD-30AE_En.book 10 ページ 2016年7月28日 木曜日 午前8時16分
Page: 10
En-11
Getting to Know the CD Player-Continued
1 To open the battery compartment, press the
small hollow and slide open the cover.
2 Insert two batteries (R03/AAA) into the
compartment.
Carefully follow the polarity diagram (positive
(+) and negative (–) symbols) inside the
battery compartment.
3 Replace the cover and slide it shut.
Notes:
• If the remote controller doesn’t work reliably, try
replacing the batteries.
• Don’t mix new and old batteries or different types
of batteries.
• If you intend not to use the remote controller for a
long time, remove the batteries to prevent dam-
age from leakage or corrosion.
• Expired batteries should be removed as soon as
possible to prevent damage from leakage or cor-
rosion.
When you operate the remote controller, point it at the
CD Player’s remote control sensor, as shown below.
Notes:
• The remote controller may not work reliably if the
CD Player is subjected to bright light, such as
direct sunlight or inverter-type fluorescent lights.
Keep this in mind when installing.
• If another remote controller of the same type is
used in the same room, or the CD Player is
installed close to equipment that uses infrared
rays, the remote controller may not work reliably.
• Don’t put anything, such as a book, on the remote
controller because the buttons may be pressed
inadvertently, thereby draining the batteries.
• The remote controller may not work reliably if the
CD Player is installed in a rack behind colored
glass doors. Keep this in mind when installing.
• The remote controller will not work if there’s an
obstacle between it and CD Player’s remote con-
trol sensor.
Installing the Batteries Aiming the Remote Controller
Approx. 7 m
(23 ft.)
Remote control sensor
SN229402408_PD-30AE_En.book 11 ページ 2016年7月28日 木曜日 午前8時16分
Page: 11
En-12
Disc Notes
Precautions for Playback
Compact discs (CDs) with the following logo on the
label surface can be used.
Do not use discs designed for purposes other than
audio, such as CD-ROMs for PC use. Abnormal
noise could damage the speakers or amplifier.
* This CD player supports CD-R and CD-RW discs.
Note that some discs may not play back because of the
disc characteristics, scratches, contamination or the
recording state. A disc recorded with an audio CD
recorder will not play back unless it is finalized.
Never use discs which have an unusual shape
(such as hearts or octagons). These types of discs
could jam and damage the CD player.
CD Playback with Copy-control Function
Some audio CDs with copy-control functionality do
not comply with official CD standards. These are
special discs and cannot be played with this CD
player.
Playback of MP3 Discs
MP3 files recorded on a CD-R/CD-RW can be
played with this CD player.
• Use discs which have been recorded following the
ISO9660 Level 2 file system. (The supported
directory depth is eight levels, the same as
ISO9660 Level 1)
• Discs recorded with the hierarchical file system
(HFS) cannot be played.
• Up to 99 folders (including the root folder), and up
to 499 files (including root) and files can be rec-
ognized and played.
Notes:
• A disc recorded with a recorder or personal com-
puter may not play in some cases. (Cause: Disc’s
characteristics, damaged or dirty disc, dirt on
player’s lens, dew condensation, etc.)
• A disc recorded on a personal computer may not
play because of the application settings or envi-
ronment. Record the disc with the proper format.
(Contact the application maker for details.)
• A disc with insufficient storage capacity may not
play back properly.
Playback of MP3 Discs
• Only MP3 files with the extension “.MP3” or “.
mp3” are supported.
• This CD player supports files recorded in MPEG
1 Audio Layer 3 (32-320kbps), with a sampling
frequency of 32/44.1/48 kHz.
• Variable bitrates (VBR) between 32kbps and
320kbps are supported. The time information
during VBR playback may not display correctly.
Handling Discs
Hold discs by the edge, or by the center hole and
edge. Avoid touching the playback surface (surface
with nothing printed on it).
Do not attach paper or stickers, or write on the play-
back or label surface of the disc. Take care not to
scratch or damage the disc.
Precautions for Rental Discs
Do not use discs with residue from cellophane tape,
rental discs with labels which are peeling off, or discs with
decorative labels. This type of disc could get stuck in the
CD player, or could damage the CD player.
Precautions for Inkjet Printable Discs
Do not leave a CD-R/CR-RW having a label printed
with an inkjet printer in the CD player for a long
time. The disc could get stuck in the CD player, or
could damage the CD player.
Remove the disc from the CD player when not being
played, and store it in a case. A freshly printed disc will
stick easily, and should not be played immediately.
Caring for Discs
If the disc is dirty, the PD-30AE/PD-10AE will have
a hard time reading signals, and the audio quality
may drop. If the disc is dirty, gently wipe off finger-
prints and dust with a soft cloth. Lightly wipe from
the center outwards.
To remove stubborn dust or
dirt, wipe the disc with a soft
cloth dampened with water,
and then dry it with a dry
cloth. Do not use cleaning
spray for analog records or
antistatic agents, etc. Never
use volatile chemicals such
as benzine or paint thinner
as they can impregnate the disc surface.
Label surface
(printed surface)
Playback surface
SN229402408_PD-30AE_En.book 12 ページ 2016年7月28日 木曜日 午前8時16分
Page: 12
En-13
Connecting the CD Player
• Before making any connections, read the manu-
als supplied with your other components.
• Don’t connect the power cord until you’ve com-
pleted and double-checked all connections.
• We will not accept responsibility for damage aris-
ing from the connection of equipment manufac-
tured by other companies.
Connection Color Coding
RCA-type audio connections are usually color-
coded: red and white. Use red plugs to connect
right-channel audio inputs and outputs (typically
labeled “R”). Use white plugs to connect left-chan-
nel audio inputs and outputs (typically labeled “L”).
• Push plugs in all the way to
make good connections
(loose connections can
cause noise or malfunc-
tions).
• To prevent interference, keep audio cables away
from power cords and speaker cables.
Optical/Coaxial Digital Jack (PD-30AE
only)
The unit supports 16 bit, 44.1 kHz PCM signal digi-
tal output.
The PD-30AE’s optical digital jack has a shutter-
type cover that opens when an optical plug is
inserted and closes when it’s removed. Push the
plug in all the way.
Caution: To avoid damaging the shutter, hold the
optical plug straight when inserting and removing.
Note:
Do not put anything on top of the PD-30AE/PD-
10AE, as it may interfere with proper ventilation.
Audio Connections
Analog audio
cable
Left (white)
Right (red)
Left (white)
Right (red)
Right!
Wrong!
RCA/phono
audio cable
(supplied)
Opticaldigital
cable (not
supplied)
Hi-fi amp, AV receiver
Connect one or
the other
Coaxial cable
(not supplied)
Connect one or
the other
Coaxial cable
(not supplied)
Optical digital
cable (not sup-
plied)
CD-R, MiniDisc, DAT recorder
Disconnect the power
cord before making
any connections!
CD Optical IN Coaxial IN Optical IN
Coaxial IN
PD-30AE only
SN229402408_PD-30AE_En.book 13 ページ 2016年7月28日 木曜日 午前8時16分
Page: 13
En-14
Connecting the CD Player-Continued
By connecting Pioneer brand components with
control jacks with monaural miniplug cables (with-
out resistors), you can centralize control of the
devices using the remote controller of this unit. This
also allows remote control of components not
equipped with a remote sensor, or installed in
places where the component’s remote sensor can-
not be accessed.
Note:
• When connecting the CONTROL IN/OUT jacks,
supplied analog audio cables must also be used
to make analog connections. Merely connecting
the CONTROL IN/OUT jacks alone will not allow
proper system control.
• When a monaural miniplug cable is connected to
the PD-30AE’s CONTROL IN jack, the unit can-
not be controlled by pointing the remote control at
the PD-30AE (the remote sensor is automatically
disabled).
Connecting the Power Cord
Before connecting the power cord, connect all of the other components.
Using centralized control with other Pioneer components (PD-30AE only)
Monaural miniplug cable
(without resistor)
(not supplied)
Other Pioneer component
equipped with CONTROL IN/OUT
jacks
To other Pioneer component
equipped with CONTROL IN
jack
Aim remote control
at the sensor on the
PD-30AE.
Plug the power cord into a
suitable electrical outlet
SN229402408_PD-30AE_En.book 14 ページ 2016年7月28日 木曜日 午前8時16分
Page: 14
En-15
Basic Operation
To turn on the CD Player, press the
[Í STANDBY/ON] button on the unit or the remote
controller. Press the [Í STANDBY/ON] button
again to set the CD Player to Standby.
You can specify that if the CD Player is left stopped
for 30 minutes, the power will automatically turn off,
placing the unit in Standby mode (Auto Standby
function).
On the North American model:
The default setting is “Off”.
On the European model:
The default setting is “On”.
Make settings for this function while playback is
stopped.
1 Press the [SETUP] button.
2 Use the [] or [ ] button to display “ASb”;
then press the [ ENTER ] button.
3 Use the [] or [ ] button to switch “Off” or
“On”; then press the [ ENTER ] button.
4 “COMPLETE” appears on the display.
Note:
If playback is paused, the power will remain on
even after 30 minutes have elapsed; the Auto
Standby function will not operate.
Press the remote controller’s [DIMMER]
button repeatedly to select the following
options:
Turn down the volume, then connect your stereo
headphones to the [PHONES] jack.
You can adjust the volume by using the [PHONES
LEVEL] knob.
Turning On CD Player
Setting Auto Standby (ASb)
STANDBY/ON STANDBY/ON
ENTER
SETUP
Changing the Display Brightness
Using Headphones
Normal Dim Dimmer
PHONES
jack
SN229402408_PD-30AE_En.book 15 ページ 2016年7月28日 木曜日 午前8時16分
Page: 15
En-16
Disc Playback
1 Press the Open/Close [<] button to open
the disc tray.
2 Place the CD on the tray with the label-side
facing up.
If you're playing an 8 cm CD, place it in the
center of the tray.
3 To start playback, press the Play [1] button.
The disc tray closes and playback starts.
The contents of the disc are displayed when you use the
Open/Close [<] button to load a disc and when you press
the Stop [∫] button during playback.
Example displays:
Selecting Tracks
To return to the beginning of the track that’s currently play-
ing or paused, press the Previous [:22] button.
(Remote controller: [:])
Press the Previous [:22] button repeatedly to select
earlier tracks. (Remote controller: [:])
Press the Next [119] button repeatedly to select sub-
sequent tracks. (Remote controller: [9])
• To Fast-Forward or Fast-Reverse
During playback or while playback is paused,
hold down the [119] button on the CD Player
to fast-forward or the [:22] button on the CD
Player to fast-reverse.
If you use the remote controller, use the [22]/
[11] buttons.
On MP3 CDs, fast-reverse only works within the
MP3 file that’s currently playing.
• To Pause Playback
Press the Pause [;] button. The Pause [;]
indicator appears.
To resume playback, press the Play [1] or Pause
[;] button again.
• To Stop Playback
Press the Stop [∫] button.
• To Eject the CD
Press the Open/Close [<] button to open the
disc tray.
Notes:
- MP3 CDs -
If you press the [:22] button during playback or while
playback is paused, the beginning of the current file is
selected.
If you select a file while playback is stopped, press the
Play [1] button to start playback.
You can select MP3 files in other folders by using the
[:22]/[119] buttons.
  
 
/
ENTER
Disc tray
“DISC TOTAL” lights up.
• Audio CD
Total number
of folders
Total number
of files
• MP3 Discs
Disc name or Format
Total number
of tracks
Total playing time
SN229402408_PD-30AE_En.book 16 ページ 2016年7月28日 木曜日 午前8時16分
Page: 16
En-17
Disc Playback-Continued
Press the remote controller’s [DISPLAY] button (repeatedly) to show the following CD information.
While Playback is Stopped
During Playback or While Playback is Paused
See page 20 for details on displaying MP3 information.
Using the Remote Controller
[22]/[11]
Press to fast-forward or fast-
reverse
During playback or while playback is
paused, press and hold the Fast For-
ward [11] button to fast-forward, or the
Fast Reverse [22] button to fast-
reverse.
[DISPLAY]
Press repeatedly to display
CD information
See below for details.
Use the number buttons as
shown in the examples below to
select tracks.
To select: Press:
Track #8
Track #10
Track #34
Used to enter numbers over 9.
With MP3 CDs, you can select files in
the current folder using these buttons.
8
>10 0
1
>10 3 4
>10
[;]
Press to pause playback
[:]/[9]
Press to select tracks
• Press the Previous [:] button to
locate the beginning of the currently play-
ing or paused track. Press it repeatedly
to select earlier tracks.
• Press the Next [9] button repeatedly
to select subsequent tracks.
For MP3 files, you can select files in other
folders.
[∫]
Press to stop playback
[1]
Press to start playback
Displaying CD Information
DISPLAY
Total playing time
Total number of tracks
The elapsed time is normally
displayed.
No
indicator.
Lights up while the remaining
track time is being displayed.
“REMAIN”
Lights up while the remaining disc time is
being displayed.
If the total time is more than 99 minutes
and 59 seconds, “– –:– –” is displayed.
“TOTAL
REMAIN”
SN229402408_PD-30AE_En.book 17 ページ 2016年7月28日 木曜日 午前8時16分
Page: 17
En-18
Disc Playback-Continued
For MP3 CDs, files (MP3 files) may be organized in a
hierarchy, with folders containing files and subfolders, as
shown below.
• In this manual, MP3 files are referred to as
files. Likewise, folders (directories) are
referred to as folders.
If you don’t select a specific MP3 file or folder for
playback, all of the MP3 files on the CD will be played in
numerical order starting with file #1.
On this CD Player, there are two modes for selecting files
(MP3 files): Navigation mode and All Folder mode.
In Navigation mode, you can select files (MP3 files) by
navigating through the folder hierarchy, moving in and out
of folders and subfolders.
In All Folder mode, all folders appear at the same level,
making it easy to select folders regardless of the
hierarchy.
While playback is stopped, press the remote
controller’s [∫] or [ ] button to enter Navigation
mode, the [;] or [ ] button to enter All Folder mode.
If you use the CD Player’s button, press the [∫] button
to enter Navigation mode, press and hold the [∫]
button to enter All Folder mode.
You can change the way in which these buttons change
the playback mode. This lets you disable the file selection
methods described in Navigation mode or All Folder
mode. (See “STOP KEY” in “Setting MP3 Preferences” on
page 25.)
In Navigation mode, you can select files by navigating
through the folder hierarchy. This mode can only be used
while playback is stopped.
1 While playback is stopped, press the [ ] or
[∫] button. (front panel: [∫])
The compact disc player enters Navigation
mode and “[ROOT]” appears on the display.
2 Press the [ ] or [ENTER] button (front
panel: [1]).
The first folder name in ROOT appears on the
display.If the disc contains no folders, the first
file name appears.
3 Use the []/[ ] or [:]/[9] buttons to
select other folders and files at the same
level. (front panel: [:22]/[119])
To move up a level, press the [ ] or [;] button
(front panel: [∫]).
Folders that don’t contain files or subfolders
can’t be selected.
4 Press the [ENTER] or [ ] button to move
down a level (front panel: [1]).
5 Use the []/[ ] or [:]/[9] buttons to
select a file in the folder. (front panel:
[:22]/[119])
Selecting Files (MP3 CDs)
File #11
File #1
File #10
Folder #3
File #12
Root Folder #1
Folder #2
File #13
Folder #4
File #14
File #18
Selecting Files in Navigation Mode
ENTER

 
/
SN229402408_PD-30AE_En.book 18 ページ 2016年7月28日 木曜日 午前8時16分
Page: 18
En-19
Disc Playback-Continued
6 Press the [ENTER] or [1] button.
Playback will start with the specified file or
folder and continue until all of the files on the
disc have been played.
To cancel the procedure at any point, press the [∫].
Note:
• The behavior of the [∫] on the CD Player can be
set from “STOP KEY” preference (page 25).
In All Folder mode, you don’t have to navigate the folder
hierarchy because all folders that contain files appear at
the same level. This mode can only be used while
playback is stopped.
1 While playback is stopped, press the [ ] or
[;] button (front panel: press and hold the
[∫]).
The CD Player enters All Folder mode, and “1-
” appears on the display.
2 Use the []/[ ] or [:]/[9] buttons to
select the other folders. (front panel:
[:22]/[119])
You can select any folder that contains files.
3 Press the [ ] button (front panel: [1]).
The first file name inside the folder appears.
Use the []/[ ] or [:]/[9] buttons to
select the files within the folder.
To select another folder, press the [;] button again
(front panel: [∫]), and then use the [:]/[9]
buttons to select it (front panel: [:22]/
[119]).
4 Press the [ENTER] or [1] button to start
playback.
Playback will start with the specified file or
folder and continue until all of the file on the
disc have been played.
To cancel the procedure at any point, press the [∫].
∫ To Select Folders and Files by Number
1. Use the number buttons as shown in the
examples below to enter folder/file numbers.
To select: Press:
Folder/File #8
Folder/File #10
Folder/File #34
Used to enter numbers over 9.
2. Playback starts. When you enter folder number,
playback will start from the first file in the selected
folder. If a folder contains more than 99 files, single
and double-digit file numbers must be preceded by
zeros. For example, to specify file #8, press >10, 0, 0,
and 8. To specify file #34, press >10, 0, 3, and 4. To
specify file #134, press >10, 1, 3, and 4.
Note:
• The behavior of [∫] on the CD Player can be set
from “STOP KEY” preference (page 25).
1 Press the [SEARCH] button.
The display blinks.
Selecting Files in All Folder Mode
ENTER

 
/
Selecting a Folder during Playback
(Search Mode)
8
>10 0
1
>10 3 4
>10
ENTER
SEARCH
SN229402408_PD-30AE_En.book 19 ページ 2016年7月28日 木曜日 午前8時16分
Page: 19
En-20
Disc Playback-Continued
2 To select the previous folder, press the
Previous [] button.
To select the next folder, press the Next [ ]
button.
3 Press the [ENTER] button to display the file
name, and start playback the selected file.
4 Use the Previous [:] and Next [9]
buttons to select the previous or next file,
and start playback.
Note:
The [SEARCH] button cannot be used during “Random
Playback” or “Memory Playback”.
You can display various information about the MP3 file
currently playing, including ID3 tags such as title name,
artist name, and album name.
During playback, press the [DISPLAY] button
repeatedly to display the following MP3
information.
Elapsed file time: The length of time that the current file
has been playing (default display). If the elapsed time is
more than 99 minutes and 59 seconds, “– –:– –” is dis-
played.
File name: Name of the current file.
Folder name: Name of the current folder.
Title: Title of the current file (if ID3 tag is present). When
there is no ID3 tag, “TITLE-NO DATA” appears.
Artist name: Name of the artist (if ID3 tag is present).
When there is no ID3 tag, “ARTIST-NO DATA” appears.
Album name: Name of the album (if ID3 tag is present).
When there is no ID3 tag, “ALBUM-NO DATA” appears.
Sampling rate and bit rate: Sampling rate and bit rate of
the current file.
Notes:
• To display the disc name, press the [DISPLAY]
button while playback is stopped.
• If a file or folder name contains any characters
that cannot be displayed, an underscore will
appear in place of those characters. Alternatively,
you can set the CD Player so that names
containing such characters are displayed as
“FILE n” or “FOLDER n,” “n” being the file or
folder number (see “BAD NAME” on page 24).
Displaying MP3 Information
DISPLAY
SN229402408_PD-30AE_En.book 20 ページ 2016年7月28日 木曜日 午前8時16分
Page: 20
En-21
Various Playback Modes
You can select the following playback modes:
• Random playback
• Memory playback
• Repeat playback
With random playback, all of the files on the disc
are played in random order.
1 While playback is stopped, press the [RAN-
DOM] button; the RANDOM indicator
appears.
2 To start random playback, press the Play
[1] button.
∫To Cancel Random Playback
• Stop playback, then press the [RANDOM] button
to change the playback mode. The RANDOM
indicator disappears, and random playback is
cancelled.
• Random playback is cancelled when the disc is
ejected.
In memory playback, you can create a playlist of up
to 25 files.
Memory playback can be set only when playback is
stopped.
1 Press the [MEMORY] button; the MEMORY
indicator appears.
Random Playback
RANDOM
RANDOM indicator
Track currently playing
Memory Playback (For Audio CDs)
DISPLAY
CLEAR
MEMORY
ENTER
MEMORY indicator
Playlist number
SN229402408_PD-30AE_En.book 21 ページ 2016年7月28日 木曜日 午前8時16分
Page: 21
En-22
Various Playback Modes-Continued
2 Use the Previous and Next []/[ ] buttons
to select the first file you want to add to the
playlist, and then press [ENTER] button.
Repeat this step to add additional files to the playlist.
Alternatively, you can use the number buttons on the
remote controller to select files instead of the Previ-
ous and Next []/[ ] and the [ENTER] buttons.
Notes:
• If the total playing time is more than 99 min-
utes and 59 seconds, “– –:– –” appears.
• You can add up to 25 files to the playlist. If you try
to add more, the message “MEM FULL” appears.
3 To start memory playback, press the
[ENTER] button. Memory playback starts.
Alternatively, you can start playback with the
Play [1] button.
∫To Change the Display
While creating a playlist for memory playback, you
can press the [DISPLAY] button to change the dis-
play information as follows:
∫To Select Other Files During Memory
Playback
Use the Previous and Next [:]/[9] buttons.
∫To Check What’s on the Playlist
While playback is stopped, use the Fast Reverse
and Fast Forward [22]/[11] buttons to scroll
through the playlist.
∫To Remove Files from the Playlist
• While memory playback is stopped, press the
[CLEAR] button. Each press removes the last file
from the playlist.
• The playlist is deleted when you change the play-
back mode (i.e., when you press the [MEMORY]
button after stopping playback).
∫To Cancel Memory Playback
• Stop playback, then press the [MEMORY] button to
change the playback mode. The MEMORY indica-
tor disappears, and memory playback is cancelled.
• Memory playback is cancelled when the disc is
ejected.
Memory Playback in Navigation Mode
Memory playback can be set only when playback is
stopped.
1 Press the [MEMORY] button; the MEMORY
indicator appears.
2 Press the [∫] or [ ] button.
The CD Player enters Navigation mode and
“ROOT” appears on the display.
3 Press the [ENTER] button.
The first folder name in ROOT appears on the
display.
4 Use the []/[ ] buttons to select other fold-
ers and files at the same level.
Folders that don’t contain files or subfolders
can’t be selected. Repeat steps 3 and 4 to
select the files and subfolders in that folder.
5 Press the [ENTER] button.
The first item is memorized in the playlist.
Track to be added
to the playlist
Total time of
playlist
Track currently playing
Total playback
time of the
memorized files
Memory
number
Current play-
back time of the
selected file
Memory Playback (For MP3 CDs)
ENTER
MEMORY
MEMORY indicator
SN229402408_PD-30AE_En.book 22 ページ 2016年7月28日 木曜日 午前8時16分
Page: 22
En-23
Various Playback Modes-Continued
6 Use the [ ]/[]/[ ] buttons to continue
selecting other items for memory playback.
To move up a level, press the [ ] button.
To continue selecting items for memory play-
back, repeat steps 4 and 5.
To memorize other items of the same folder in
the playlist, use the []/[ ] buttons to select
items, then press the [ENTER] button.
7 Press the Play [1] button.
Memory playback starts.
Memory Playback in All Folder Mode
Memory playback can be set only when playback is
stopped.
1 Press the [MEMORY] button; the MEMORY
indicator appears.
2 Press the [;] or [ ] button.
The CD Player enters All Folder mode and “1-”
appears on the display.
3 Use the []/[ ] buttons to select the folder.
4 Press the [ENTER] button.
5 Use the []/[ ] buttons to select the file.
6 Press the [ENTER] button.
The first file is memorized in the playlist.
7 Press the [ ] button, then repeat steps 3 to
6.
To memorize other files of the same folder in the
playlist, repeat steps 5 to 6.
8 Press the Play [1] button.
Memory playback starts.
∫To Change the Display
While creating a playlist for memory playback, you
can press the [DISPLAY] button to change the dis-
play information as follows:
In repeat playback, you can play an entire CD
repeatedly, play one track repeatedly, or combine it
with memory playback to play the playlist repeat-
edly, or random playback to play all of the tracks on
the disc in random order repeatedly.
Press the [REPEAT] button; the “REPEAT ALL”
or “REPEAT1” indicator appears.
Repeat-1 playback can’t be combined with memory
playback or random playback.
∫To Cancel Repeat Playback
• Press the [REPEAT] button repeatedly until
“REPEAT OFF” appears. (The REPEAT indicator
disappears.)
• Repeat playback is cancelled when the disc is
ejected.
File name Folder name Memory
number
Repeat Playback
REPEAT
SN229402408_PD-30AE_En.book 23 ページ 2016年7月28日 木曜日 午前8時16分
Page: 23
En-24
Setting for MP3
The MP3 preferences let you change the way MP3
file information is displayed and the way MP3 CDs
are played.
The MP3 preferences can be set only when
playback is stopped.
1 Press the [SETUP] button.
2 Use the []/[ ] buttons to select the
preference you want to change.
The preferences are explained in the next column.
3 Press the [ENTER] button.
4 Use the []/[ ] buttons to select the
preference’s options.
To cancel the procedure at any point, press
the [∫] button.
5 Press the [ENTER] button.
When the preference has been set, “COM-
PLETE” appears on the display.
Preferences
Below, the name of each preference is followed by
its options in parentheses, with the default option in
bold.
∫ DISC NAME (Display/Not)
This preference determines whether the disc name
is displayed when an MP3 disc is loaded.
∫ FILE NAME (Scroll/Not)
This preference determines whether the file name
scrolls across the display when an MP3 file is
selected.
∫ FOLDER NAME (Scroll/Not)
This preference determines whether the folder
name scrolls across the display when an MP3
folder is selected.
In Navigation mode (see page 18), the folder name
scrolls across the display regardless of this setting.
∫ BAD NAME (Replace/Not)
This preference determines whether file and folder
names that contain undisplayable characters are
replaced with “File n” or “Folder n,” “n” being the file or
folder number. When set to Not Replace, displayable
characters are displayed and underscore characters
are used in place of any undisplayable characters.
For ID3 tags, underscore characters are used in place of
undisplayable characters regardless of this preference.
Note:
File and folder names are scrolled in Navigation
mode (page 18) regardless of the FILE NAME and
FOLDER NAME preferences.
∫ ID3 VER. 1 (Read/Not Read)
This preference determines whether version 1.0/
1.1 tags are read and displayed. When set to Not
Read, version 1.0/1.1 tags are not displayed.
∫ ID3 VER. 2 (Read/Not Read)
This preference determines whether version 2.2/
2.3/2.4 tags are read and displayed. When set to
Not Read, version 2.2/2.3/2.4 ID3 tags are not
displayed.
∫ CD EXTRA (Audio/MP3)
This preference applies to CD Extra discs and
determines whether music in the audio session or
MP3 files in the data session are played.
∫ JOLIET (Use SVD/ISO9660)
This preference applies to MP3 discs in Joliet format
and determines whether the CD-Player reads the SVD
data or treats the disc as an ISO 9660 disc. Normally,
this preference doesn’t need to be changed.
SVD (Supplementary Volume Descriptor) supports
long file and folder names and characters other than
letters and numbers. Some CD burning software
refers to the Joliet format as “Windows format.”
∫ HIDE NUMBER (Disable/Enable)
This preference determines whether the numbers at
the beginning of file and folder names are hidden.
When you create an MP3 CD on a personal com-
puter, you cannot normally determine the playback
order of the files. However, if you number the MP3
files in order, starting with 01, 02, 03, and so on,
they will play in that order. If you don’t want these
numbers to appear on the display, choose Enable.
The following table shows a few examples of
numbered file and folder names and how they will
appear with the Disable and Enable options.
Setting MP3 Preferences
ENTER
SETUP
SN229402408_PD-30AE_En.book 24 ページ 2016年7月28日 木曜日 午前8時16分
Page: 24
En-25
Setting for MP3-Continued
∫ STOP KEY (All Folder/Navigation/Disable)
This preference determines how the Stop [∫] button
on the CD Player works.
When the ALL Folder option is selected, pressing
the Stop [∫] button once selects All Folder mode.
When the Navigation option is selected, pressing
the Stop [∫] button once selects Navigation mode.
When the Disable option is selected, the CD Player
does not enter Navigation or All Folder mode when
you press the Stop [∫] button.
∫ ASb (On/Off)
Please refer to “Setting Auto Standby (ASb)”
(page 15) for details of the procedure.
On the North American model:
The default setting is “Off”.
On the European model:
The default setting is “On”.
File/folder name Disable Enable
01 Pops 01 Pops Pops
10-Rock 10-Rock Rock
16_Jazz 16_Jazz Jazz
21st Century 21st Century 21st Century
05-07-20 Album 05-07-20 Album Album
SN229402408_PD-30AE_En.book 25 ページ 2016年7月28日 木曜日 午前8時16分
Page: 25
En-26
Troubleshooting
If you have any trouble using the CD Player, look for a solution in this section.
Can’t turn on the PD-30AE/PD-10AE.
• Make sure that the power cord is properly plugged into the wall outlet (page 14).
• Unplug the power cord from the wall outlet, wait five seconds or more, then plug it in again.
There’s no sound.
• The PD-30AE/PD-10AE is not connected properly. Check all connections and correct as necessary.
• The wrong input source is selected on your amplifier. Check your amplifier’s input source setting. Refer to
your amplifier’s manual.
Can’t play a CD.
• The disc is upside down. Load the disc with the label-side facing up (page 16).
• The disc is dirty. Remove the disc and clean it (page 12).
• Condensation has formed inside the PD-30AE/PD-10AE. Unplug the power cord and leave the unit for two
to three hours in the room temperature unitl the condensation has evaporated.
• The disc is nonstandard. See “Disc Notes” on page 12.
CD playback skips.
• Install the PD-30AE/PD-10AE in a location that is free of vibration.
• The disc is dirty. Remove the disc and clean it (page 12).
• The disc is very scratched. Replace the disc.
Can’t enter track numbers for memory playback.
• No such track on the CD. Enter another number (page 22).
It takes a long time to locate certain tracks.
• The disc is dirty. Remove the disc and clean it (page 12).
• The disc is very scratched. Replace the disc.
Can’t access the SETUP menu.
• If any track has been selected even when the PD-30AE/PD-10AE is stopped, you must place it into the full
stop state by pressing the [∫] button before you can view all the SETUP menus.
The remote controller does not work.
• There are no batteries in the remote controller. Install new batteries (page 11).
• The batteries are expired. Replace with new batteries (page 11).
• The batteries are installed incorrectly. Check the batteries and correct as necessary (page 11).
Power
Audio
CD
SETUP
If you can’t resolve the issue yourself, try resetting the CD Player before contacting the dealer from whom
you purchased this unit.
To reset the CD Player to its factory defaults, turn it on and, while holding down the [119]
button, press the [;] button. “Clear” will appear on the display.
Note that resetting the CD Player will delete your custom settings.
Remote Controller
SN229402408_PD-30AE_En.book 26 ページ 2016年7月28日 木曜日 午前8時16分
Page: 26
En-27
Troubleshooting-Continued
• You’re not pointing the remote controller at the PD-30AE/PD-10AE’s remote sensor. Point the remote
controller at the PD-30AE/PD-10AE’s remote sensor (page 11).
• You’re too far away from the PD-30AE/PD-10AE. Move the remote controller closer to the PD-30AE/PD-
10AE (page 11). The remote controller has a range of approximately 5 meters (16 ft.).
• A strong light source is interfering with the PD-30AE/PD-10AE’s remote sensor. Make sure that the PD-
30AE/PD-10AE is not subjected to direct sunshine or inverter-type fluorescent lights. Relocate if neces-
sary.
• If the PD-30AE/PD-10AE is installed in a cabinet with colored glass doors, the remote controller may not
work reliably when the doors are closed. Open the doors, or use a cabinet without colored glass.
Specifications
Specifications and features are subject to change
without notice.
Company is not responsible for damages (such as CD rental fees) due to unsuccessful recordings caused
by malfunctions of the unit. Before you record important data, make sure that the material will be recorded
correctly.
The PD-30AE/PD-10AE contains a microcomputer for signal processing and control functions. In very rare
situations, severe interference, noise from an external source, or static electricity may cause it to lockup.
In the unlikely event that this should happen, unplug the power cord, wait at least 10 seconds, and then
plug it again.
Frequency Response: 4 Hz – 20 kHz
Audio Dynamic Range: 100 dB
THD (Total Harmonic
Distortion): 0.0029 %
Signal to Noise Ratio: 107 dB
Rated RCA Output Level and
Impedance:
(PD-30AE only) 2.0 V (rms) / 540 Ω
Audio Output (Digital/Optical): –22.5 dBm
Audio Output/Impedance
(Digital/Coaxial): 0.5 V p-p / 75 Ω
Operation Condition
Temperature/Humidity: 5 °C–35 °C/ 5 %–85 %
Power Supply
North American: AC 120 V, 60 Hz
Other: AC 220–240 V, 50/60 Hz
Power Consumption: 12 W
Stand-by Power Consumption
0.2 W
Dimensions:
(W × H × D)
435 × 103 × 298 mm
(17 1/8 × 4 1/16 ×
11 3/4 inches) (PD-30AE)
435 × 103 × 290 mm
(17 1/8 × 4 1/16 ×
11 7/16 inches) (PD-
10AE)
Weight: 5.3 kg (11.7 lbs) (PD-
30AE)
5.1 kg (11.2 lbs) (PD-
10AE)
Disc Compatibility:* Audio CD, CD-R,
CD-RW, MP3 (CD-R,
CD-RW)
* Discs that have not been properly finalized may only be
partially playable or not playable at all
∫Audio Outputs
Digital Outputs:
(PD-30AE only) 1 (OPTICAL), 1 (COAXIAL)
Analog Outputs: 1
∫Others
Control Input/Output:
(PD-30AE only) 2
SN229402408_PD-30AE_En.book 27 ページ 2016年7月28日 木曜日 午前8時16分
Page: 27
SN 29402408
© 2016 Onkyo & Pioneer Corporation. All rights reserved.
© 2016 Onkyo & Pioneer Corporation. Tous droits de reproduction et de traduction réservés.
* 2 9 4 0 2 4 0 8 *
F1607-0
“Pioneer” is a trademark of Pioneer Corporation, and is used under license.
Printed in Malaysia / Imprimé en Malaisie / Напечатано в Малайзии
Корпорация О энд Пи
2-3-12, Яэсу, Чуо-ку, г. Токио, 104-0028, ЯПОНИЯ
<Germany>
Hanns-Martin-Schleyer-Straße 35, 47877 Willich, Germany
Tel: +49(0)2154 913222
<UK>
Anteros Building, Odyssey Business Park, West End Road, South Ruislip,
Middlesex, HA4 6QQ United Kingdom
Tel: +44(0)208 836 3612
<France>
6, Avenue de Marais F - 95816 Argenteuil Cedex FRANCE
Tel: +33(0)969 368 050
2-3-12 Yaesu, Chuo-ku, Tokyo 104-0028 JAPAN
<U.S.A.>
18 PARK WAY, UPPER SADDLE RIVER, NEW JERSEY 07458, U.S.A.
Tel: 1-201-785-2600 Tel: 1-844-679-5350
Register your product on
http://www.pioneerelectronics.com (US)
http://www.pioneerelectronics.ca (Canada)
http://www.pioneer.eu (Europe)
SN229402408_PD-30AE_En.book 28 ページ 2016年7月28日 木曜日 午前8時16分

Question & answers

There are no questions about the Pioneer PD-30AE yet.

Ask a question about the Pioneer PD-30AE

Have a question about the Pioneer PD-30AE but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Pioneer PD-30AE. Please make sure that you describe your difficulty with the Pioneer PD-30AE as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.