Pioneer KEH-P2800R manual

View a manual of the Pioneer KEH-P2800R below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Pioneer
  • Product: CD-player
  • Model/name: KEH-P2800R
  • Filetype: PDF
  • Available languages: English

Table of Contents

Page: 0
Multi-CD control High power cassette player
with RDS tuner
Operation Manual
KEH-P2830R
KEH-P2800R
Page: 1

&RQWHQWV
Installation ............................................ 3
Installation with the rubber bush ........................ 3
Removing the Unit .............................................. 3
Connection Diagram ............................ 4
Connecting the Units ........................... 6
Key Finder ............................................ 7
Before Using This Product .................. 8
About This Product ............................................. 8
About This Manual ............................................. 8
Precaution ........................................................... 8
In Case of Trouble .............................................. 8
Detaching and Replacing the
Front Panel ........................................... 9
Theft Protection .................................................. 9
Initial Setting Menu ............................ 10
Entering the Initial Setting Menu ..................... 10
Changing the FM Tuning Step ......................... 10
Switching the Auto PI Seek .............................. 11
Basic Operation ................................. 12
Switching Power On ......................................... 12
Switching Power Off ........................................ 12
Tuner Operation ................................. 13
Basic Operation of Tuner ................................. 13
AF Function Switching ..................................... 14
Entering the Function Menu ............................. 15
Local Seek Tuning ............................................ 16
Preset Tuning .................................................... 16
BSM (Best Stations Memory) .......................... 17
Preset Memory .................................................. 17
Recalling Preset Stations .................................. 18
Using the Programmable Button ...................... 18
Using RDS Functions ........................ 20
What is RDS? ................................................... 20
Program Service Name Display ....................... 20
AF Function ..................................................... 21
PI Seek Function .............................................. 22
REG Function ................................................... 22
TA Function ..................................................... 23
PTY Function ................................................... 25
Using the Cassette Player ................. 28
Basic Operation of Cassette Player .................. 28
Fast Forward/Rewind ....................................... 29
Entering the Function Menu ............................. 29
Radio Intercept ................................................. 30
Cassette Player and Care .................. 31
Precaution ......................................................... 31
Cleaning the Head ........................................... 31
Audio Adjustment .............................. 32
Selecting the Mode ........................................... 32
Balance Adjustment ......................................... 32
Bass/Treble Adjustment ................................... 33
Loudness Adjustment ....................................... 33
Other Functions ................................. 34
Time Display/Setting ....................................... 34
Specifications .................................... 35
Page: 2

,QVWDOODWLRQ
1RWH
• Before finally installing the unit, connect the wiring temporarily, making sure it is all connected up
properly, and the unit and the system work properly.
• Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts
can cause malfunctions.
• Consult with your nearest dealer if installation requires the drilling of holes or other modifications of
the vehicle.
• Install the unit where it does not get in the driver's way and cannot injure the passenger if there is a
sudden stop, like an emergency stop.
• If installation angle exceeds 30° from horizontal, the unit might not give its optimum performance.
Installation with the rubber bush
Removing the Unit
30˚
182
53
1
2
3
4
1. Dashboard
2. Holder
After inserting the holder into the dashboard,
then select the appropriate tabs according to
the thickness of the dashboard material and
bend them.
(Install as firmly as possible using the top
and the bottom tabs. To secure, bend the tabs
90 degrees.)
3. Rubber bush
4. Screw
5 5. Insert the supplied extraction keys into the
unit, as shown in the figure, until they click
into place. Keeping the keys pressed against
the sides of the unit, pull the unit out.
Page: 3

&RQQHFWLRQ'LDJUDP
This product conforms to new cord colors.
1
3
2
4
5
7
8
9
10
11
7
8
9
10
11
6
13
14
12
15
A
B
1. This unit
2. Rear output
3. Anntenna jack
4. Multi-CD player (sold separately)
5. Connect leads of the same color to each other.
6. 1RWH
• Depending on the kind of vehicle, the function
of 9 and 11 may be different. If this is the case,
be sure to connect 8 to 11 and 9 to 10.
• When the power cord of a component such as
a Multi-CD Player is connected to this unit's
power cord, check that 9 and 11 (Back-up or
Accessory) are operating correctly, and that
connections are correct.
7. Cap
8. Yellow
To terminal always supplied with power
regardless of ignition switch position.
9. Yellow
Back-up (or accessory)
10. Red
To electric terminal controlled by ignition switch
(12 V DC) ON/OFF.
11. Red
Accessory (or Back-up)
12. Black (ground)
To vehicle (metal) body.
13. ISO connector
1RWH
• In some vehicles, the ISO connector may be
divided into two. If this is the case, be sure to
connect to both connectors.
Page: 4

16
17
18
19
20
21 22
23 23
24
A
B
 CAUTION
Cords for this product
and those for other
products may be
different colors even if
they have the same
function. When
connecting this product
to another product, refer
to the supplied
Installation manuals of
both products and
14. Speaker leads
White: Front left 
White/black: Front left 
Gray: Front right 
Gray/black: Front right 
Green: Rear left 
Green/black: Rear left 
Violet: Rear right 
Violet/black: Rear right 
15. Fuse
16. Connecting cords with RCA pin plugs (sold
separately).
17. Blue/white
18. System remote control
19. To system control terminal of the power amp or
Auto-antenna relay control terminal.
(Max. 300 mA 12 V DC.)
20. Power amp (sold separately)
21. Left speaker
22. Right speaker
23. Rear
24. Use this for connections when you have the
separately available amplifier.
Page: 5

&RQQHFWLQJWKH8QLWV
1RWH
• This unit is for vehicles with a 12-volt battery and negative grounding. Before installing it in a
recreational vehicle, truck, or bus, check the battery voltage.
• To avoid shorts in the electrical system, be sure to disconnect the  battery cable before beginning
installation.
• Secure the wiring with cable clamps or adhesive tape. To protect the wiring, wrap adhesive tape
around them where they lie against metal parts.
• Route and secure all wiring so it cannot touch any moving parts, such as the gear shift, handbrake and
seat rails. Do not route wiring in places that get hot, such as near the heater outlet. If the insulation of
the wiring melts or gets torn, there is a danger of the wiring short-circuiting to the vehicle body.
• Don't pass the yellow lead through a hole into the engine compartment to connect to the battery. This
will damage the lead insulation and cause a very dangerous short.
• Do not shorten any leads. If you do, the protection circuit may fail to work when it should.
• Never feed power to other equipment by cutting the insulation of the power supply lead of the unit
and tapping into the lead. The current capacity of the lead will be exceeded, causing overheating.
• When replacing fuse, be sure to use only fuse of the rating prescribed on this unit.
• Since a unique BPTL circuit is employed, never wire so the speaker leads are directly grounded or
the left and right  speaker leads are common.
• The black lead is ground. Please ground this lead separately from the ground of high-current products
such as power amps.
If you ground the products together and the ground becomes detached, there is a risk of damage to the
products or fire.
• Speakers connected to this unit must be high-power types possessing minimum rating of 40 W and
impedance of 4 to 8 ohms. Connecting speakers with output and/or impedance values other than those
noted here can damage the speakers.
• When an external power amp is being used with this system, be sure not to connect the blue/white
lead to the amp's power terminal. Likewise, do not connect the blue/white lead to the power terminal
of the auto-antenna. Such connection could cause excessive current drain and malfunction.
• To prevent incorrect connection, the input side of the IP-BUS connector is blue, and the output side
is black. Connect the connectors of the same colors correctly.
• If this unit is installed in a vehicle that does not have an ACC (accessory) position on the ignition
switch, the red lead of the unit should be connected to a terminal coupled with ignition switch ON/
OFF operations. If this is not done, the vehicle battery may be drained when you are away from the
vehicle for several hours.
ACC position No ACC position
ACC
O
N
S
T
A
R
T
O
F
F O
N
S
T
A
R
T
O
F
F
Page: 6

.H\)LQGHU
SOURCE button Cassette door
Eject
button
$%
buttons
PTY button

buttons
Detach button
AUDIO button
Function button
BAND
button
DISP/Clock
button
+/– button
Programmable button
TA/AF button
Buttons 1 – 6
Page: 7

%HIRUH8VLQJ7KLV3URGXFW
About This Product
• This product complies with the EMC Directives (89/336/EEC, 92/31/EEC) and CE Marking
Directive (93/68/EEC).
The tuner frequencies on this product are allocated for use in Western Europe, Asia, the Middle
East, Africa and Oceania. Use in other areas may result in improper reception. The RDS
function operates only in areas with FM stations broadcasting RDS signals.
About This Manual
This product features a number of sophisticated functions ensuring superior reception and
operation. All are designed for the easiest possible use, but many are not self-explanatory. This
operation manual is intended to help you benefit fully from their potential and to maximize
your listening enjoyment.
We recommend that you familiarize yourself with the functions and their operation by reading
through the manual before you begin using this product. It is especially important that you read
and observe the "Precaution" on this page and in other sections.
In this Operation Manual, the Basic Operation for each sound source is outlined at the
beginning of its explanation, covering simple operation for that source, such as merely playing
music.
Precaution
Page: 8
 The Pioneer CarStereo-Pass is for use only in Germany.
Page: 9
 Keep this manual handy as a reference for operating procedures and precautions.
Page: 10
 Always keep the volume low enough for outside sounds to be audible.
Page: 11
 Protect the product from moisture.
Page: 12
 If the battery is disconnected, the preset memory will be erased and must be reprogrammed.
In Case of Trouble
Should this product fail to operate properly, contact your dealer or nearest authorized Pioneer
Service Station.
Page: 13

'HWDFKLQJDQG5HSODFLQJWKH)URQW3DQHO
Theft Protection
The front panel of the main body is detachable to discourage theft.

 Detaching the front panel
(MHFWWKHIURQWSDQHO
7RUHPRYHWKHIURQWSDQHOSXOOLWVULJKWKDQGVLGHWRZDUG\RX
Take care not to grip it tightly or drop it.
8VHWKHSURWHFWLYHFDVHSURYLGHGWRVWRUHFDUU\WKHGHWDFKHGIURQWSDQHO

 Replacing the Front Panel
Page: 14
 5HSODFHWKHIURQWSDQHOE\FOLSSLQJLWLQWRSODFH
Precaution:
• Never use force or grip the display tightly when removing or replacing the front panel.
• Avoid subjecting the front panel to excessive shocks.
• Keep the front panel out of direct sunlight and high temperatures.
Page: 15

,QLWLDO6HWWLQJ0HQX
With this menu, you can perform initial settings for the unit. Setting options cover everything
from tuning steps for the tuner to auto PI seek ON/OFF switching.
Entering the Initial Setting Menu
(QWHUWKH,QLWLDO6HWWLQJ0HQXZLWKWKHVRXUFHVRII
To cancel the Initial Setting Menu, press the BAND button.
1RWH
• Holding down the Function button for 2 seconds also cancels the Initial Setting Menu.
6HOHFWWKHGHVLUHGPRGH
Each press of the Function button selects the mode in the following order:
FM STEP = A-PI
Changing the FM Tuning Step
Normally set at 50 kHz during Seek tuning in the FM mode, the tuning step changes to 100 kHz
when the AF or TA mode is activated.
It may be preferable to set tuning step to 50 kHz in the AF mode.
Page: 16
 6HOHFWWKHGHVLUHGWXQLQJVWHS
1RWH
• The tuning step remains set at 50 kHz during Manual tuning.
• The tuning step returns to 100 kHz if the battery is temporarily disconnected.
Hold for 2 seconds
Each press changes the Mode ...
Page: 17

,QLWLDO6HWWLQJ0HQX
Switching the Auto PI Seek
During Preset Station PI Seek operation, you can switch the Auto PI Seek function ON/OFF.
(Refer to “PI Seek Function” on page 22.)
Page: 18
 6ZLWFKWKH$XWR3,6HHN21RU2))
Switching the AUX mode
It is possible to use auxiliary (AUX) equipment with this product.
Activate the AUX mode when using external equipment with this product.
Page: 20

%DVLF2SHUDWLRQ
Switching Power On
Page: 22

Each press of the SOURCE button selects the desired source in the following order:
Tuner + Tape + Multi-CD player + AUX
1RWH
• In the following cases, the sound source will not change:
*No Multi-CD player is connected to this unit.
*No cassette tape is set in this unit.
*No magazine is set in the Multi-CD player.
*AUX (external input) is set to OFF. (See page 11.)
Switching Power Off
Switch the sources OFF.
Hold for 1 second
Page: 23

7XQHU2SHUDWLRQ
Basic Operation of Tuner
6HOHFW7XQHU6HHSDJH
Page: 24
The program service name or frequency appears on the display.
("" indicator lights when a stereo station is selected.)
6HOHFWWKHGHVLUHGEDQG
7XQHWKHUHFHLYHUWRDKLJKHURUORZHUIUHTXHQF\
This product’s tuner lets you select the tuning by changing the length of the time you press the
button.
1RWH
• To select a weak broadcasting station that cannot be tuned in with the Seek Tuning function, tune in
with Manual Tuning.
Manual Tuning (step by step) 0.3 seconds or less
Seek Tuning 0.3 - 2 seconds
Manual Tuning (continuously) 2 seconds or more
Each press changes the Source ...
FI + FII + FIII + MW/LW
Page: 26
AF Function Switching
This product’s AF function can be switched ON and OFF. AF should be switched OFF for
normal tuning operations.
Page: 27
 6ZLWFK$)2))
To switch AF ON, repeat the preceding operation.
1RWH
• You can also switch the AF Function ON/OFF in the Function Menu.
Hold for 1 second
Hold for 2 seconds “AF” disappears
Page: 28

Entering the Function Menu
In this menu you can select tuner functions.
1RWH
• REG, TA, PTY and AF are RDS functions. Refer to "Using RDS Function" for details and
instructions on how to use these functions.
Page: 29
 6HOHFWWKHGHVLUHGPRGHLQ)XQFWLRQ0HQX
Each press of the Function button selects the mode in the following order:
BSM + REG + LOCAL + TA + PTY SELECT + AF
1RWH
• You can cancel the Function Menu by pressing the BAND button.
• After selecting the Function Menu, if you do not perform an operation within about 30 seconds, the
Function Menu is automatically canceled.
Each press changes the Mode ...
Page: 30

7XQHU2SHUDWLRQ
Local Seek Tuning
This mode selects only stations with especially strong signals. The sensitivity can be adjusted
in 4 steps for FM and 2 steps for MW/LW.
6HOHFWWKH/RFDOPRGHLQWKH)XQFWLRQ0HQX
6ZLWFKWKH/RFDOPRGH21RU2))
6HOHFWWKHGHVLUHG/RFDO6HHN6HQVLWLYLW\LQWKHIROORZLQJRUGHU
FM: LOCAL 1 , LOCAL 2 , LOCAL 3 , LOCAL 4
MW/LW: LOCAL 1 , LOCAL 2
1RWH
• Pressing the BAND button cancels the Function Menu.
• The LOCAL 4 setting allows reception of only the strongest stations, while lower settings let you
receive progressively weaker stations.
Preset Tuning
Up to 18 FM stations (6 in FI (FM1), FII (FM2) and FIII (FM3)) and 6 MW/LW stations can
be stored in memory.
Store the stations in memory under buttons 1-6 beforehand with the BSM (Best Stations
Memory) or Preset Memory function.
Page: 31

BSM (Best Stations Memory)
The BSM function stores stations in memory automatically.
6HOHFWWKH%60PRGHLQWKH)XQFWLRQ0HQX
6ZLWFKWKH%60PRGH21
The stations with the strongest signals will be stored under buttons 1-6 and in order of their
signal strength.
1RWH
• Pressing the BAND button cancels the Function Menu.
Page: 32
 7RFDQFHOWKHSURFHVVSUHVVWKHEXWWRQLQWKH)XQFWLRQ0HQXEHIRUH
PHPRUL]DWLRQLVFRPSOHWH
Preset Memory
The Preset Memory function stores stations in memory manually.
6HOHFWWKHVWDWLRQZKRVHIUHTXHQF\\RXZDQWWRVWRUHLQPHPRU\
3UHVVRQHRIEXWWRQVIRUVHFRQGVRUORQJHUWRVWRUHWKHGHVLUHGVWDWLRQV
The station is stored in memory under the selected button.
Hold for 2 seconds
Page: 33

7XQHU2SHUDWLRQ
Recalling Preset Stations
There are two ways to recall preset stations.

 Direct Recall
Page: 35
 5HFDOODVWDWLRQSUHVHWXQGHUEXWWRQ
Using the Programmable Button
You can memorize Function Menu BSM, REG and LOCAL functions in the Programmable
button.
Initially, the BSM function is memorized in the Programmable button.

 Setting the Programmable Button
6HOHFWWKH3URJUDPPDEOHEXWWRQVHWWLQJPRGH
Hold for 2 seconds
Page: 36

6HOHFWWKHIXQFWLRQ\RXZDQWWRPHPRUL]HLQWKH3URJUDPPDEOHEXWWRQ
0HPRUL]HWKHIXQFWLRQLQWKH3URJUDPPDEOHEXWWRQ
1RWH
• Pressing the BAND button cancels the Programmable button setting mode.

 Using the Programmable Button
The Programmable button operates in a different way depending on the function programmed
(memorized).
Page: 37
 8VHWKHSURJUDPPDEOHEXWWRQ
Function Press Hold for 2 seconds
BSM ——— ON/OFF
REG ON/OFF ———
LOC ON/OFF Entering the Local Seek Sensitivity mode
Page: 38

8VLQJ5'6)XQFWLRQV
What is RDS?
RDS (Radio Data System) is a system for transmitting data along with FM programs. This data,
which is inaudible, provides a variety of features such as: program service name, program type
display, traffic announcement standby, automatic tuning and program type tuning, intended to
aid radio listeners in tuning to a desired station.
1RWH
• RDS service may not be provided by all stations.
• RDS functions, like AF (Alternative frequencies search) and TA (Traffic Announcement standby),
are only active when your radio is tuned to RDS stations.
Program Service Name Display
With this function, the names of networks/stations providing RDS services replace the
frequency on the display a few seconds after they are tuned in.
Page: 39
 &KDQJHWKHGLVSOD\
Each press of the DISP/Clock button selects the mode in the following order:
Program Service Name + PTY Information + Frequency
1RWH
• After switching displays, if you do not perform an operation within 8 seconds, the Program Service
Name is automatically displayed.

 Displaying PTY Information
PTY (Program Type ID code) information for the currently tuned station appears on the display
for 8 seconds. The information is correlated with the list in the section “PTY Function” on page
25.

 Displaying the Frequency
The frequency of the current station appears on the display.
Each press changes the Mode ...
Page: 40

AF Function
The AF (Alternative Frequencies search) function is used to search for other frequencies in the
same network as the currently tuned station. It automatically retunes the receiver to another
frequency in the network which is broadcasting a stronger signal when there are problems with
reception of the currently tuned station or better reception is possible on a different frequency.
1RWH
• AF tunes the receiver only to RDS stations when you use Seek tuning or BSM Auto Memory with the
"AF" indicator ON.
• When you recall a preset station, the tuner may update the preset station with a new frequency from
the station's AF list. (This is only available when using presets on the FM1 and FM2 bands.) No preset
number appears on the display if the RDS data for the station received differs from that for the
originally stored station.
• Sound may be temporarily interrupted by another program during an AF frequency search.
• When the tuner is tuned to a non-RDS station, the "AF" indicator flashes.
• AF can be switched ON or OFF independently for each FM band.

 Activating/deactivating the AF Function
AF is set to ON by default.
Page: 41
 7XUQ$)WR2))
To turn AF back ON, repeat the preceding operation.
1RWH
• You can also switch the AF Function ON/OFF in the Function Menu.
Hold for 2 seconds "AF" disappears
Page: 42

8VLQJ5'6)XQFWLRQV
PI Seek Function
The tuner searches for another frequency broadcasting the same programming.
"PI SEEK" appears on the display and the radio volume is muted during a PI Seek. The muting
is discontinued after completion of the PI Seek, whether or not the PI seek has succeeded.
If the PI Seek is unsuccessful, the tuner returns to the previous frequency.

 Auto PI Seek
If the tuner fails to locate a suitable alternative frequency or if the broadcasting signal is too
weak for proper reception, the PI Seek will automatically start.

 Preset Station PI Seek
When preset stations cannot be recalled, as when traveling long distances, the unit can be set
to perform PI Seek also during preset recall.
The default setting for PI Seek is OFF.
1RWH
• Refer to "Initial Setting Menu" for details on how to switch this unit ON/OFF.
REG Function
When AF is used to retune the tuner automatically, REG (regional) limits the selection to
stations broadcasting regional programs.
1RWH
• Regional programming and regional networks are organized differently depending on the country
(i.e., they may change according to the hour, state or broadcast area).
• The preset number may disappear on the display if the tuner tunes in a regional station which differs
from the originally set station.

 Activating REG
The REG function can be turned ON independently for each FM band.
6HOHFWWKH5(*PRGHLQWKH)XQFWLRQ0HQX
$FWLYDWHRUGHDFWLYDWH5(*ZKLOHLQDQ)0EDQG
1RWH
• Pressing the BAND button cancels the Function Menu.
"REG"
Page: 43

TA Function
The TA (Traffic Announcement standby) function lets you receive traffic announcements
automatically, no matter what source (tuner, cassette player or multi-CD player) you are
listening to. The TA function can be activated for either a TP station (a station that broadcasts
traffic information) or an EON TP station (a station carrying information which cross-
references TP stations).

 Activating/Deactivating the TA Function
7XQHLQD73RU(2173VWDWLRQ
The "TP" indicator lights when the tuner is tuned to a TP station, and both the "EON" and "TP"
indicators light when it is tuned to an EON TP station.
$FWLYDWHWKH7$IXQFWLRQ
The "TA" indicator lights, indicating that the tuner is waiting for traffic announcements.
Repeat the preceding operation when no traffic announcement is being received to deactivate
the TA function.
1RWH
• You can also switch the TA Function ON/OFF in the Function Menu.
• Only the (+), (–), TA/AF, AUDIO, DISP/Clock and SOURCE buttons can be used during traffic
announcement reception.
• The system switches back to the original source following traffic announcement reception.
• The TA function can be activated from the cassette player or multi-CD player mode if the tuner was
last set to the FM band but not if it was last set to the MW/LW band.
• If the tuner was last set to FM, turning on the TA function lets you operate other tuning functions
while listening to a cassette or CD.
• Only TP or EON-TP stations are tuned in during the Seek Tuning mode when the "TA" indicator is
ON.
• Only TP or EON-TP stations are stored by BSM when the "TA" indicator is ON.
"TA"
Page: 44

8VLQJ5'6)XQFWLRQV

 Canceling Traffic Announcements
Page: 45
 3UHVVWKH7$$)EXWWRQZKLOHDWUDIILFDQQRXQFHPHQWLVEHLQJUHFHLYHGWRFDQFHO
WKHDQQRXQFHPHQWDQGUHWXUQWRWKHRULJLQDOVRXUFH
The announcement is canceled but the tuner remains in the TA mode until the TA/AF button
is pressed again.

 Adjusting the TA Volume
When a traffic announcement begins, the volume adjusts automatically to a preset level to
enable you to hear the announcement clearly.
Page: 46
 6HWWKHYROXPHE\DGMXVWLQJLWGXULQJUHFHSWLRQRIDWUDIILFDQQRXQFHPHQW
The newly set volume is stored in memory and recalled for subsequent traffic announcements.

 TP Alarm function
About 30 seconds after the "TP" or "EON" indicator is extinguished due to a weak signal, a 5
second beep sounds to remind you to select another TP or EON-TP station.
Page: 47
 ,I\RXDUHOLVWHQLQJWRWKHWXQHUWXQHLQDQRWKHU73VWDWLRQRU(2173VWDWLRQ
In the cassette player mode, the tuner automatically seeks out the TP station with the strongest
signal in the current area 10 (or 30)* seconds after "TP" disappears from the display.

7LPHWDNHQEHIRUH6HHNEHJLQV
TA function ON 10 seconds
TA, AF functions ON 30 seconds
Page: 48

PTY Function
The PTY function enables you to select stations by the type of programming they broadcast
(PTY Search). It also provides automatic tuning to emergency broadcasts (PTY Alarm).
1RWH
• PTY code program types are as follows:
1. NEWS: News.
2. AFFAIRS: Current affairs.
3. INFO: General information and advice.
4. SPORT: Sports programs.
5. EDUCATE: Educational programs.
6. DRAMA: All radio plays and serials.
7. CULTURE: Programs concerned with any aspect of national or regional culture.
8. SCIENCE: Programs about nature, science and technology.
9. VARIED: Light entertainment programs.
10. POP MUS: Popular music.
11. ROCK MUS: Contemporary modern music.
12. EASY MUS: Easy listening music.
13. L. CLASS: Light classical music.
14. CLASSICS: Serious classical music.
15. OTH MUS: Other types of music, which can't be categorized.
16. WEATHER: Weather reports/Meteorological information.
17. FINANCE: Stock market reports, commerce, trading etc.
18. CHILDREN: Children's programs.
19. SOCIAL: Social affairs programs.
20. RELIGION: Religion affairs programs or services.
21. PHONE IN: Phone in based programs.
22. TOURING: Travel programs, not for announcements about traffic problem.
23. LEISURE: Programs about hobbies and recreational activities.
24. JAZZ: Jazz music based programs.
25. COUNTRY: Country music based programs.
26. NAT MUS: National music based programs.
27. OLDIES: Oldies music, 'Golden age' based programs.
28. FOLK MUS: Folk music based programs.
29. DOCUMENT: Documentary programs.
• If a PTY code of zero is received from a station, "NONE" will be displayed. This indicates that the
station has not defined its programme contents.
• If the signal is too weak for this product to pick up the PTY code, "NO PTY" will be displayed.
Page: 49

8VLQJ5'6)XQFWLRQV

 PTY Search Setting Function
(QWHUWKH37<6HDUFKVHWWLQJPRGH
The "PTY" indicator lights and the name of a program type appears on the display for 5
seconds.
1RWH
• CURRENT sets desired PTY to the program type of the current station (only for RDS stations
broadcasting PTY information).
6HOHFWRQHRIWKH37<V
:KHQWKHGHVLUHGSURJUDPPLQJW\SHDSSHDUVRQWKHGLVSOD\UHWXUQWRWKH
QRUPDOGLVSOD\
1RWH
• You can also select the PTY Search Setting PTY Code in the Function Menu, and switch the PTY
Search Function ON/OFF.
Hold for 2 seconds “PTY”
Page: 50


 PTY Search Function
Page: 51
 ,QLWLDWHD37<VHDUFK
The tuner searches for a station broadcasting the desired PTY.
1RWH
• The program of some stations may differ from that indicated by the transmitted PTY.
• If no station broadcasting the selected programming type is found, "NOT FOUND" is displayed for
about 2 seconds, and the tuner returns to the original station.

 PTY Alarm
PTY Alarm is a special PTY code for announcements regarding emergencies such as natural
disasters. When the tuner receives the radio alarm code, "ALARM" appears on the display and
the volume adjusts to the TA volume. When the station stops broadcasting the emergency
announcement, the system returns to the previous source.
1RWH
• Only the (+), (–), TA/AF, AUDIO, DISP/Clock and SOURCE buttons can be used during emergency
announcement reception.
• The system switches back to the original source following emergency announcement reception.

 Canceling Emergency Announcements
Page: 53

8VLQJWKH&DVVHWWH3OD\HU
Basic Operation of Cassette Player
,QVHUWWKHFDVVHWWHWDSH
6ZLWFKWDSHSOD\EDFNIURPVLGH$WRVLGH%RUYLFHYHUVD
5DLVHRUORZHUWKHYROXPH
5HPRYHWKHFDVVHWWHWDSH
1RWH
• The Tape function can be turned ON/OFF with the cassette tape remaining in this product.
(See page 12.)
Same Time
Page: 54

Fast Forward/Rewind

 Fast Forward
While "<-->" is displayed, the system fast-forwards the cassette tape to the end of the current
side.

Question & answers

There are no questions about the Pioneer KEH-P2800R yet.

Ask a question about the Pioneer KEH-P2800R

Have a question about the Pioneer KEH-P2800R but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Pioneer KEH-P2800R. Please make sure that you describe your difficulty with the Pioneer KEH-P2800R as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.