Pioneer CDJ-800 MK2 manual

View a manual of the Pioneer CDJ-800 MK2 below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Pioneer
  • Product: CD-player
  • Model/name: CDJ-800 MK2
  • Filetype: PDF
  • Available languages: Dutch, English, German, French, Spanish, Italian

Table of Contents

Page: 1
2
En <DRB1400>
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
"dangerous voltage" within the product's
enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.
CAUTION:
TO PREVENT THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
IMPORTANT
D3-4-2-1-1_En-A
Do not connect either wire to the earth terminal of a
three pin plug.
NOTE
After replacing or changing a fuse, the fuse cover in
the plug must be replaced with a fuse cover which
corresponds to the colour of the insert in the base
of the plug or the word that is embossed on the
base of the plug, and the appliance must not be
used without a fuse cover. If lost replacement fuse
covers can be obtained from your dealer.
Only 5 A fuses approved by B.S.I or A.S.T.A to
B.S.1362 should be used.
D3-4-2-1-2-2_En
The wires in this mains lead are coloured in
accordance with the following code:
Blue : Neutral
Brown : Live
If the plug provided is unsuitable for your socket
outlets, the plug must be cut off and a suitable plug
fitted.
IMPORTANT
FOR USE IN THE UNITED
KINGDOM
The cut-off plug should be disposed of and must
not be inserted into any 13 amp socket as this can
result in electric shock. The plug or adaptor or the
distribution panel should be provided with 5 A fuse.
As the colours of the wires in the mains lead of this
appliance may not correspond with coloured
markings identifying the terminals in your plug,
proceed as follows ;
The wire which is coloured blue must be connected
to the terminal which is marked with the letter N or
coloured black.
The wire which is coloured brown must be
connected to the terminal which is marked with the
letter L or coloured red.
Replacement and mounting of an AC plug on the power supply cord of this unit should be performed only by qualified
service personnel.
CAUTION
This product is a class 1 laser product, but this
product contains a laser diode higher than Class 1.
To ensure continued safety, do not remove any covers
or attempt to gain access to the inside of the product.
Refer all servicing to qualified personnel.
The following caution label appears on your unit.
Location: top of the CD drive
CLASS 1
LASER PRODUCT
D3-4-2-1-8_B_En
CAUTION
ATTENTION
CLASS 3B INVISIBLE LASER RADIATION
WHENOPEN, AVOID EXPOSURE TO BEAM.
RADIATIONSLASERINVISIBLESDECLASSE3BQUAND
OUVERT.ÉVITEZTOUTEXPOSITIONAUFAISCEAU.
ADVARSEL KLASSE3BUSYNLIGLASERSTRÅLINGVEDÅBNING.
UNDGÅUDSÆTTELSEFORSTRÅLING.
VARNING KLASS 3B OSYNLIGLASERSTRÅLNINGNÄRDENNADEL
ÄRÖPPNAD. UNDVIK ATT UTSÄTTADIGFÖR STRÅLEN.
VARO! AVATTAESSA OLET ALTTIINA NÄKYMÄTTÖMÄLLE
LUOKAN 3B LASERSÄTEILYLLE. ÄLÄ KATSO SÄTEESEEN.
PRECAUCIAÓN CUANDOSEABREHAYRADIACIÓN LÁSER DE CLASE 3B
INVISIBLE. EVITE LA EXPOSICIÓN A LOS RAYOS LÁSER.
VORSICHT BEIGEÖFFNETERABDECKUNGISTUNSICHTBARELASERSTRAHLUNG
DERKLASSE3B IMGERÄTEINNEREN VORHANDEN.NICHT DEM
LASERSTRAHLAUSSETZEN!
DRW2308-A
WARNING
This equipment is not waterproof. To prevent a fire
or shock hazard, do not place any container filed
with liquid near this equipment (such as a vase or
flower pot) or expose it to dripping, splashing, rain
or moisture. D3-4-2-1-3_A_En
WARNING
The voltage of the available power supply differs
according to country or region. Be sure that the
power supply voltage of the area where this unit
will be used meets the required voltage (e.g., 230V
or 120V) written on the rear panel. D3-4-2-1-4_A_En
Before plugging in for the first time, read the following
section carefully.
WARNING
To prevent a fire hazard, do not place any naked
flame sources (such as a lighted candle) on the
equipment. D3-4-2-1-7a_A_En
VENTILATION CAUTION
When installing this unit, make sure to leave space
around the unit for ventilation to improve heat
radiation (at least 5 cm at rear, and 5 cm at each
side).
WARNING
Slots and openings in the cabinet are provided for
ventilation to ensure reliable operation of the
product, and to protect it from overheating. To
prevent fire hazard, the openings should never be
blocked or covered with items (such as newspapers,
table-cloths, curtains) or by operating the
equipment on thick carpet or a bed. D3-4-2-1-7b_A_En
Operating Environment
Operating environment temperature and humidity:
+5 ºC – +35 ºC (+41 ºF – +95 ºF); less than 85 %RH
(cooling vents not blocked)
Do not install this unit in a poorly ventilated area, or in
locations exposed to high humidity or direct sunlight (or
strong artificial light) D3-4-2-1-7c_A_En
This product complies with the Low Voltage Directive
(73/23/EEC, amended by 93/68/EEC), EMC Directives
(89/336/EEC, amended by 92/31/EEC and
93/68/EEC). D3-4-2-1-9a_En
If the AC plug of this unit does not match the AC
outlet you want to use, the plug must be removed
and appropriate one fitted. Replacement and
mounting of an AC plug on the power supply cord of
this unit should be performed only by qualified
service personnel. If connected to an AC outlet, the
cut-off plug can cause severe electrical shock. Make
sure it is properly disposed of after removal.
The equipment should be disconnected by removing
the mains plug from the wall socket when left
unused for a long period of time (for example, when
on vacation). D3-4-2-2-1a_A_En
CAUTION
The POWER switch on this unit will not completely
shut off all power from the AC outlet. Since the
power cord serves as the main disconnect device for
the unit, you will need to unplug it from the AC outlet
to shut down all power. Therefore, make sure the
unit has been installed so that the power cord can
be easily unplugged from the AC outlet in case of an
accident. To avoid fire hazard, the power cord should
also be unplugged from the AC outlet when left
unused for a long period of time (for example, when
on vacation). D3-4-2-2-2a_A_En
POWER-CORD CAUTION
Handle the power cord by the plug. Do not pull out the
plug by tugging the cord and never touch the power
cord when your hands are wet as this could cause a
short circuit or electric shock. Do not place the unit, a
piece of furniture, etc., on the power cord, or pinch the
cord. Never make a knot in the cord or tie it with other
cords. The power cords should be routed such that they
are not likely to be stepped on. A damaged power cord
can cause a fire or give you an electrical shock. Check
the power cord once in a while. When you find it
damaged, ask your nearest PIONEER authorized
service center or your dealer for a replacement. S002_En
If you want to dispose this product, do not mix it with general
household waste. There is a separate collection system for used
electronic products in accordance with legislation that requires
proper treatment, recovery and recycling.
Private households in the 25 member states of the EU, in Switzerland and
Norway may return their used electronic products free of charge to desig-
nated collection facilities or to a retailer (if you purchase a similar new one).
For countries not mentioned above, please contact your local authorities for
the correct method of disposal.
By doing so you will ensure that your disposed product undergoes the neces-
sary treatment, recovery and recycling and thus prevent potential negative
effects on the environment and human health.
Thank you for buying this Pioneer product.
Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading
the instructions, put them away in a safe place for future reference.
In some countries or regions, the shape of the power plug and power outlet may sometimes differ from that shown in the explanatory
drawings. However the method of connecting and operating the unit is the same. K015 En
Page: 3
4
En <DRB1400>
Contents/Specifications
Contents
Specifications
1. General
System ................................ Compact disc digital audio system
Power requirements ..................... AC 220 V to 240 V, 50/60 Hz
Power consumption .......................................................... 24 W
Operating temperature..................................... +5 °C to +35 °C
Operating humidity.................................................5 % to 85 %
(There should be no condensation of moisture.)
Weight.............................................................................. 4.0 kg
Dimensions ....................... 305 (W) x 344.1 (D) x 108.5 (H) mm
2. Audio section
Frequency response ...........................................4 Hz to 20 kHz
Signal-to-noise ratio ............................... 115 dB or more (JEITA)
Distortion.......................................................... 0.006 % (JEITA)
3. Accessories
÷ Operating instructions ......................................................... 1
÷ Power cord .......................................................................... 1
÷ Audio cable .......................................................................... 1
÷ Control cord ......................................................................... 1
÷ Forced eject pin
(housed in a groove in the bottom panel) ............................ 1
NOTE:
Specifications and design are subject to possible modification
without notice.
Before Operating
Specifications ........................................................................... 4
Features ................................................................................... 6
Handling Precautions ............................................................... 8
Discs Usable with This Unit ................................................... 10
Connections ........................................................................... 13
Names and Functions of Parts ............................................... 16
Basic Operations
Loading and Removing Discs ................................................. 20
DJ Player Operation ............................................................... 22
Auto cueing ...................................................................... 22
Starting playback .............................................................. 22
To stop playback ............................................................... 23
To pause playback ............................................................ 23
Fast forward / Fast reverse .............................................. 23
Track search...................................................................... 24
Folder search (MP3 only).................................................. 24
Cue point settings ............................................................ 25
To change the playing speed ............................................ 26
Applying master tempo .................................................... 26
Jog dial functions ............................................................. 26
Mixing different tracks ..................................................... 28
About TEXT display .......................................................... 29
Advanced Operations
Advanced Operations ............................................................. 30
Scratch play ...................................................................... 30
Spin play ........................................................................... 30
Braking ............................................................................. 30
Quick return ...................................................................... 31
Loop playback................................................................... 31
Reverse play ..................................................................... 33
About fader start play ....................................................... 33
Relay play using two players ............................................ 34
Cue point / loop point memory ......................................... 34
Copying recorded data to another player ......................... 35
Other
Troubleshooting...................................................................... 36
Page: 5
Features
6
En <DRB1400>
Features
The CDJ-800MK2 compact disc player is designed for use by
DJs providing all the functions and performance required in disco
clubs while offering performance, sound quality and functional-
ity superior to any analog player.
JOG DIAL
The large 206 mm diameter jog dial enables better handling
than an analog turntable.
¶ PITCH BEND
This function changes the music tempo depending on direction
of jog dial rotation and speed of movement.
¶ SCRATCH PLAY
In the VINYL mode when the surface of the jog dial is pressed
playback is discontinued and then continues according to the
direction and speed the dial is rotated. You can also adjust the
startup when the jog dial is touched and released to create new
DJ techniques.
¶ FRAME SEARCH
Moves the disc from pause position in frame increments (1/75
sec) when the jog dial is rotated in pause mode.
¶ SUPER FAST SEARCH
Rotate the jog dial while holding depressed the SEARCH button,
TRACK SEARCH button, or FOLDER SEARCH button. When this
is done, search will be performed faster than the normal search,
track search, or folder search operations.
ON JOG DISPLAY
The center of the jog dial displays information regarding disc sta-
tus, cue point position, sound memory status, jog dial touch-
detection, and VINYL mode.
CUE/LOOP MEMORY
This player is equipped with an internal memory that permits the
recording of one disc cue point or loop point per disc; the re-
corded points can later be recalled as desired.
QUICK RETURN
In the VINYL mode, merely touching the Jog dial’s top surface
will initiate a quick return to the cue point.
REVERSE PLAY
When the reverse button (REV) is pressed so that the button’s
indicator lamp lights, play is performed in the reverse direction.
TEMPO CONTROL
100 mm high-precision slider coupled with a 0.05 % incre-
ment digital display (within a ±10 % range) allows exact control
of speed to make tempo adjustments easy and accurate.
¶ TEMPO CONTROL RANGE
The maximum variable range can be set to two variable ranges:
±10 % and WIDE to facilitate adjustment.
¶ MASTER TEMPO
Changes music tempo without changing pitch.
MP3 DJ PLAY
MP3 files recorded on CD-ROM can be played with DJ func-
tions.
CUE
¶ BACK CUE
After storing the cue point in memory, press the CUE button
while playing the unit to go back to the cue point and start over.
¶ AUTO CUE
Auto cue automatically locates the song’s start point even if it
differs from the track’s frame, allowing the player to start in-
stantly at a press of the PLAY button.
¶ CUE POINT SAMPLER
The sound from the memorized cue point can be reproduced by
one touch, which can be used as the start point check and the
sampler.
REAL TIME SEAMLESS LOOP
This function simplifies setting and releasing loops. This func-
tion lets you set a loop while you are playing a track. A loop can
also be set at the end of the track so that the track does not
stop. In addition, an ADJUST mode has been added to enable
one-touch adjustments to Loop-out points and facilitate loop
operation.
AUTO BEAT LOOP
This function uses the track’s BPM to automatically set a loop
out point and perform loop play.
RELOOP
Allows you to replay a loop any number of times.
Press the RELOOP button after releasing loop play to return to
the loop start point. Clever use of on and off in combination with
the rhythm make it possible to create new sound effects.
PLAYING ADDRESS
This bar graph provides a visual representation of track playback
progress that enables you to see current playback position just
like you can on an analog record by checking needle position.
The length of the bar shows current position and a flashing bar
provides advance notice of track end.
SLOT IN
Discs are loaded directly without opening doors or trays, making
track selection that much faster.
FADER START
When a Pioneer DJ mixer (sold separately) is connected, the
mixer’s fader operation can be used to perform quick start and
back cue.
MULTI READ
Allows playback of CD-R, CD-RW discs (recorded in music CD or
MP3 format). (Note that some discs may not play properly due
to characteristics of the individual disc, recorder, or disc soiling
and scratches.)
Page: 7
Handling Precautions
8
En <DRB1400>
Installation location
¶ Placing and using the player for long periods on heat-generat-
ing sources such as amplifiers or near spotlights, etc. will af-
fect product performance. Avoid placing the player on heat-
generating sources.
¶ Install this player as far as possible away from tuners and TV
sets. The player installed in close proximity to such equip-
ment may cause noise or degradation of the picture.
Noise may be noticeable when an indoor antenna is used. In
such cases, make use of an outdoor antenna or turn off power
to the player.
¶ When the unit is used in a loud-sound environment, e.g., near
a speaker, sound skip may occur. Install the unit away from
the speaker or reduce the listening volume.
¶ Place this unit on a level surface and a stable platform.
Take adequate note of the following precautions when pre-
paring a place for installation:
Be sure the player, including its video, audio and power supply
cords, does not touch vibrating materials. Any vibration other
than that transmitted through the insulators may cause the disc
to skip. Take special care when using the player while it is in-
stalled in a carrying case.
Moving the unit
■ Never move the unit during playback!
During playback, a disc rotates at very high speed; moving the
player during playback may result in scratches or other damage
to the disc.
■ When moving the unit is necessary
Before moving the unit, remove any disc and disconnect the
power. Malfunctions or damage may result if the unit is moved
with a disc loaded.
About the carrying case
The upper surface of the jog dial is equipped with a touch-sensi-
tive switch. When placing the player in its carrying case, avoid
placing any pressure on the jog dial.
Condensation
When this unit is brought into a warm room from previously cold
surroundings or when the room temperature rises sharply, con-
densation may form inside the unit and impair its performance.
In such cases, allow the unit to stand for about an hour or raise
the room temperature gradually.
Cleaning the player
To clean the player wipe with a polishing or a soft, dry cloth. For
stubborn dirt, moisten a soft cloth with a weak solution of neu-
tral detergent (diluted in five to six parts water), wring the cloth
well, and wipe away the dirt. Use a dry cloth to wipe the surface
dry. Do not use volatile liquids such as benzene or thinner which
will damage the unit.
About the lens cleaner
The player’s pickup lens should not become dirty in normal use.
If for some reason, the lens becomes soiled and malfunctions,
contact your nearest PIONEER authorized service center. Lens
cleaners for CD players are commercially available, but special
care should be exercised in their use as some may cause dam-
age to the lens.
Handling Precautions
Do not place on or
against vibrating
materials!
Leave space to
allow for heat
dissipation.
Leave space to
allow for heat
dissipation.
Leave space to allow for heat
dissipation.
Page: 9
Discs Usable with This Unit (Types of discs playable on this unit/Playing MP3 files)
10
En <DRB1400>
Playing MP3 files
MP3 files may be found in two formats: Constant Bit Rate (CBR) and Variable Bit Rate (VBR). This component supports playback
and DJ play with both CBR and VBR type MP3 files, but in comparison with CBR files, files recorded in VBR format will experience
slower search and super-fast search speeds. As a result, when operating speed is most important, the use of the CBR recording
format is recommended for MP3 files.
MP3 files must follow the format requirements listed below.
* CDJ-800MK2 is not equipped with a File Sort function; tracks will be played in the order in which they were recorded.
* Plays MP3 files stored on CD-ROM.
* Startup time increases with the number of folders.
MP3 format
Disc format
MPEG-1
MPEG-2
ID3 tag
File extension
Folder layers
Maximum number of folders
Maximum number of files
Multi-session
CD-R recording method
Supports Audio Layer-3 sampling frequency 32 kHz, 44.1 kHz, 48 kHz,
Bit Rate 32 Kbps to 320 Kbps.
Supports Audio Layer-3 sampling frequency 16 kHz, 22.05 kHz, 24 kHz,
Bit Rate 16 Kbps (stereo) to 160 Kbps.
Supports ID3 Vers. 1.0/1.1/2.2/2.3/2.4. Displays title, album, artist.
Only alpha-numerics and a limited number of symbols can be
displayed.
.mp3, .MP3, .mP3, .Mp3
Maximum 8 layers; files in folders exceeding 8 layers cannot be
played.
99 (99 folders + 1 root)
999 (per folder)
Does not support multi-session.
When the disc used is a multi-session disc, only the first session will
be played.
Record following the ISO9660 CD-ROM file system.
Supports only Disc At Once or Track At Once.
CDJ-800MK2 does not support Packet Write recorded discs.
Discs Usable with This Unit
Types of discs playable on this unit
¶ The following marks and logos are displayed on disc labels,
packaging, or jackets.
Note 1) Regarding TEXT display:
The number of characters that can be displayed is up to 48. When
a display exceeds 8 characters in length, the display will scroll.
Only alpha-numerics and a limited number of symbols can be
displayed (☞ P. 29).
Note 2) CD-R/CD-RW discs:
This player supports playback of CD-R/CD-RW discs recorded in
audio CD format or MP3.
* For details, consult the Operating Instructions for your recorder.
When playing 8 cm CDs, always use an 8 cm CD adapter
(☞ P. 20).
Notes:
¶ Some CD-R/CD-RW discs recorded on standalone recorders
or computer drives may not be playable back on this player,
due to a variety of reasons, including disc characteristics,
scratches, dirt, player lens dirt or condensation, etc.
¶ Some discs recorded on computer drives may not be playable
on this player, depending on the recording application used,
its settings, and operating environment. Be sure to use the
correct formatting for the discs used. For details, consult the
application author.
¶ This unit cannot play partially recorded CD-R or CD-RW discs
that have not been finalized.
¶ For detailed information regarding the handling of CD-R/CD-
RW discs, consult the handling precautions supplied with each
disc.
■ Regarding CD-R/RW discs
Due to the unique construction of CD-R/RW discs, leaving them
for extended periods of time in the pause (or cue standby) mode
at a single point may result in the discs’ becoming difficult to
play at that place. The same symptom may also occur if the loop
function is used to play back a single point on the disc exces-
sively.
As a result, users are advised to construct backup archive discs
when playing discs containing important data.
■ About DualDisc playback
This product is designed to conform to standards for music CDs.
No warranty is made for operation or performance when used
with discs not conforming to such music CD standards.
Types and Logos of playable discs
CD CD-TEXT (Note 1)
CD-R (Note 2)
CD-RW (Note 2)
Page: 26
Before Operating (Names and Functions of Parts)
Before Operating (Names and Functions of Parts)
27
<DRB1400> En/Fr
English
Français
DJ Player Operation/Utilisation du Lecteur DJ
2. Lecture Scratch : Rotation de la bague Jog pendant la
lecture.
Voir sous [Lecture “Scratch”] parmi les “Démarches évoluées”.
3. Recherche de cadre : Rotation de la bague Jog pendant la
pause.
Quand la bague Jog est réglée sur CDJ, le mode Pause audible est
validé et quand elle est réglée sur [VINYL], c’est la Pause inaudible
qui est validée. Le CD audio est lu à une vitesse correspondant à la
vitesse de rotation de la bague Jog.
¶ La position Pause fait changer en unité d’1 cadre.
¶ Une rotation de la bague Jog correspond à 1,8 seconde de lecture
d’un CD (135 cadres).
4. Lecture Spin : Rotation de la bague Jog pendant la lec-
ture ou la pause.
Voir sous [Lecture “Spin”] parmi les “Démarches évoluées”.
5. Recherche super rapide : Rotation de la bague Jog pen-
dant la lecture, avec maintien du bouton SEARCH enfoncé.
Pour effectuer une recherche super rapide, maintenez le bouton
SEARCH (1, ¡) enfoncé pendant la rotation de la bague Jog dans
le sens souhaité pour la recherche. La recherche à vitesse rapide
s’accomplit en proportion du degré de rotation de la bague Jog.
¶ La recherche s’accomplit dans le sens de la rotation de la bague
Jog, quel que soit le bouton SEARCH enfoncé.
¶ Quand la rotation de la bague s’arrête, la lecture repasse à la
normale.
¶ Quand le bouton SEARCH est relâché, ce mode est annulé.
¶ A la lecture MP3, l’avance rapide/recul rapide est possible
seulement à l’intérieur du même dossier.
6. Recherche super rapide de plage : Rotation de la bague
Jog avec maintien du bouton TRACK SEARCH enfoncé.
Pour effectuer une recherche de plage super rapide, maintenez le
bouton TRACK SEARCH (4, ¢) enfoncé pendant la rotation de la
bague Jog dans le sens souhaité pour la recherche. La recherche à
vitesse rapide s’accomplit en proportion du degré de rotation de la
bague Jog.
¶ La recherche s’accomplit dans le sens de la rotation de la bague
Jog, quel que soit le bouton TRACK SEARCH enfoncé.
¶ Quand le bouton TRACK SEARCH est relâché, ce mode est annulé.
¶ A la lecture MP3, la recherche est possible seulement à l’intérieur
du même dossier.
7. Recherche super rapide de dossier : Rotation de la bague
Jog avec maintien du bouton FOLDER SEARCH enfoncé
(à la lecture MP3).
Pour effectuer une recherche de dossier super rapide, maintenez le
bouton FOLDER SEARCH (|, \) enfoncé pendant la rotation de la
bague Jog dans le sens souhaité pour la recherche. La recherche
super rapide de dossier s’accomplit en proportion du degré de rota-
tion de la bague Jog.
¶ La recherche s’accomplit dans le sens de la rotation de la bague
Jog, quel que soit le bouton FOLDER SEARCH enfoncé.
¶ Quand le bouton FOLDER SEARCH est relâché, ce mode est annulé.
Remarque :
La surface de la bague Jog comporte un interrupteur intégré.
Ne posez pas d’objets sur la bague et ne la forcez pas. Ne placez
pas de boissons sur sa surface, car un liquide renversé
s’infiltrerait dans l’appareil et provoquerait des défaillances.
2. Scratch play: Rotate jog dial during playback.
See “Scratch play” in the Advanced Operations.
3. Frame search: Rotate jog dial during pause.
When jog mode is set to CDJ, the audible pause mode is enabled
and when set to [VINYL], inaudible pause is performed; the CD audio
is played at a speed corresponding to the speed of jog dial rotation.
¶ The pause position will change in units of 1 frame.
¶ One rotation of the jog dial corresponds to 1.8 seconds of CD
playback (135 frames).
4. Spin play: Rotate jog dial during playback or pause.
See “Spin play” in the Advanced Operations.
5. Super-fast search: Rotate jog dial during playback, while
holding SEARCH button depressed.
To perform high-speed search, hold the SEARCH button (1, ¡)
depressed while rotating the jog dial in the desired direction of search;
high-speed search will be performed in proportion to the degree of
jog dial rotation.
¶ The search is performed in the direction of jog dial rotation, with-
out regard to which SEARCH button is pressed.
¶ When dial rotation is stopped, playback returns to normal.
¶ When the SEARCH button is released, this mode is canceled.
¶ When playing MP3, fast forward/fast reverse can be performed
only within the same folder.
6. Super-fast track search: Rotate jog dial while holding
TRACK SEARCH button depressed.
To perform high-speed track search, hold the TRACK SEARCH but-
ton (4, ¢) depressed while rotating the jog dial in the desired
direction of search; high-speed track search will be performed in pro-
portion to the amount of jog dial rotation.
¶ The search is performed in the direction of jog dial rotation, with-
out regard to which TRACK SEARCH button is pressed.
¶ When the TRACK SEARCH button is released, this mode is
canceled.
¶ When playing MP3, search is performed only within the same
folder.
7. Super-fast folder search: Rotate jog dial while holding
FOLDER SEARCH button depressed (during MP3 play).
To perform super-fast folder search, hold the FOLDER SEARCH but-
ton (|, \) depressed while rotating the jog dial in the desired direc-
tion of search; super-fast folder search will be performed in propor-
tion to the amount of jog dial rotation.
¶ The search is performed in the direction of jog dial rotation, with-
out regard to which FOLDER SEARCH button is pressed.
¶ When the FOLDER SEARCH button is released, this mode is
canceled.
Note:
The surface of the jog dial is equipped with a built-in switch;
do not rest objects on the dial or subject it to strong forces.
Do not set drinks on the surface, since a spill could enter the
mechanism and cause malfunctions.
Page: 30
Before Operating (Names and Functions of Parts)
Advanced Operations /Démarches évoluées
31
<DRB1400> En/Fr
English
Français
Lecture à boucle
7 Définition d’une boucle
1. Appuyez sur le bouton PLAY/PAUSE (6) pour lancer la
lecture.
2. Pendant la lecture ou la pause, appuyez sur le bouton
LOOP IN/REALTIME CUE.
¶ Cette démarche n’est pas requise si un point de repère
préenregistré a déjà été défini comme point initial de boucle.
3. Quand la lecture arrive au point final de boucle souhaité,
appuyez sur le bouton LOOP OUT.
¶ Le voyant du bouton AUTO BEAT LOOP 8 (1/1) s’allume.
¶ La lecture s’accomplira entre le point initial de boucle et le point
final de boucle.
¶ Pendant la lecture MP3, une boucle peut être définie uniquement
entre deux points posés sur la même plage.
¶ Quand une boucle est définie, le bouton RELOOP/EXIT s’allume.
7 Réduction de la longueur d’une boucle
Quand le mode manuel est utilisé pour créer une boucle pendant la lec-
ture ou une pause, le bouton AUTO BEAT LOOP 8 (1/1) s’allume.
Appuyez sur un des boutons AUTO BEAT LOOP (1, 2, 4 ou 8).
¶ Quand le bouton AUTO BEAT LOOP 1 (1/8) est actionné, le voyant
du bouton s’allume et la lecture de la bouche s’accomplit entre le
point initial de boucle jusqu’à un point à 1/8e de la longueur totale
de la boucle originale.
¶ Quand le bouton AUTO BEAT LOOP 2 (1/4) est actionné, le voyant
du bouton s’allume et la lecture de la bouche s’accomplit entre le
point initial de boucle jusqu’à un point à 1/4 de la longueur totale
de la boucle originale.
¶ Quand le bouton AUTO BEAT LOOP 4 (1/2) est actionné, le voyant
du bouton s’allume et la lecture de la bouche s’accomplit entre le
point initial de boucle jusqu’à un point à 1/2 de la longueur totale
de la boucle originale.
¶ Quand le bouton AUTO BEAT LOOP 8 (1/1) est actionné, le voyant
du bouton s’allume et la lecture de la bouche s’accomplit entre le
point initial de boucle jusqu’à un point à 1/1 (tout) de la longueur
totale de la boucle originale.
Après la définition de la boucle, si vous appuyez sur un des
boutons AUTO BEAT LOOP en maintenant enfoncé le bouton
LOOP IN/REALTIME CUE, les opérations suivantes seront
exécutées :
¶ Si le bouton AUTO BEAT LOOP 1 (1/8) est actionné : 1/8e de
boucle (1/64e de la boucle initialement créée).
¶ Si le bouton AUTO BEAT LOOP 2 (1/4) est actionné : 1/4 de bou-
cle (1/32e de la boucle initialement créée).
¶ Si le bouton AUTO BEAT LOOP 4 (1/2) est actionné : 1/2 de bou-
cle (1/16e de la boucle initialement créée).
¶ Si le bouton AUTO BEAT LOOP 8 (1/1) est actionné : 1/1 de bou-
cle (1/8e de la boucle initialement créée).
¶ Quand le bouton RELOOP/EXIT est actionné, la lecture de boucle
est annulée et le mode de boucle antérieur (auto/manuel) est rétabli.
¶ When the PLAY/PAUSE button (6) is pressed once again to resume
playback, the sound accelerates at the speed set with the VINYL
SPEED ADJUST TOUCH/RELEASE dial.
Quick return
When the jog mode is set to [VINYL], pressing the surface of the jog dial
returns playback instantly to the cue point.
1. Press the JOG MODE VINYL button so that the button
indicator lights.
¶ The jog dial’s [Vinyl] indicator also lights.
2. Press the QUICK RETURN button so that the button indi-
cator lights.
¶ The jog dial display will shown the flashing cue point position indi-
cator.
3. During playback, press the surface of the jog dial.
¶ If a cue point has been stored in memory, the playback will return
instantly to the stored cue point; if no cue point has been stored in
memory, the playback will not change.
¶ Playback will also return to the in-point (cue point) if the Jog dial is
pressed during loop playback.
¶ During MP3 playback, quick return can be performed within the
same folder.
Loop playback
7 Defining a loop
1. Press the PLAY/PAUSE button (6) to begin playback.
2. During playback or pause, press the LOOP IN/REALTIME
CUE button.
¶ This operation is not required if a prerecorded cue point has al-
ready been set as the loop start point.
3. When playback reaches the desired loop-out point, press
the LOOP OUT button.
¶ The AUTO BEAT LOOP 8 (1/1) button indicator lights.
¶ Playback will begin between the loop-in and loop-out points.
¶ During MP3 play, the loop can be set only between points set
within the same track.
¶ When the loop has been set, the RELOOP/EXIT button lights.
7 Shorten the loop length
When manual mode is used to create a loop during playback or pause,
the AUTO BEAT LOOP 8 (1/1) button will light.
Press one of the AUTO BEAT LOOP buttons (1, 2, 4 or 8).
¶ When the AUTO BEAT LOOP 1 (1/8) button is pressed, the but-
ton indicator lights and loop play begins between the loop-in point
to a point 1/8 of the full length of the original loop.
¶ When the AUTO BEAT LOOP 2 (1/4) button is pressed, the but-
ton indicator lights, and loop play begins between the loop-in point
to a point 1/4 of the full length of the original loop.
¶ When the AUTO BEAT LOOP 4 (1/2) button is pressed, the but-
ton indicator lights, and loop play begins between the loop-in point
to a point 1/2 of the full length of the original loop.
¶ When the AUTO BEAT LOOP 8 (1/1) button is pressed, the but-
ton indicator lights, and loop play begins between the loop-in point
to a point 1/1 (all) of the length of the original loop.
After setting the loop, if you press one of the AUTO BEAT
LOOP buttons while holding the LOOP IN/REALTIME CUE
button depressed, the following operations will be performed:
¶ When AUTO BEAT LOOP 1 (1/8) button is pressed: 1/8 loop (1/
64th of the initially created loop)
¶ When AUTO BEAT LOOP 2 (1/4) button is pressed: 1/4 loop (1/
32nd of the initially created loop)
¶ When AUTO BEAT LOOP 4 (1/2) button is pressed: 1/2 loop (1/
16th of the initially created loop).
¶ When AUTO BEAT LOOP 8 (1/1) button is pressed, 1/1 loop (1/
8th of the initially created loop).
¶ When the RELOOP/EXIT button is pressed, loop play is canceled
and the previous loop mode (auto/manual) is restored.
Page: 35
Troubleshooting
36
En <DRB1400>
Troubleshooting
Incorrect operations can be mistaken as malfunctions. If you believe the unit is not operating correctly, consult the chart below. Sometimes incorrect
operation may be due to a malfunction in another component. If the problem is not fixed, check the other components used with the player. If the
problem still persists, contact your nearest Pioneer authorized service center or dealer for service.
Symptom
Disc doesn’t eject even when
EJECT button (0) is pressed.
Play doesn’t commence even when
the disc is inserted.
Playback immediately stops when
started.
MP3 can’t be played.
Can’t search for MP3 tracks.
No sound is audible.
Sound is distorted, noise is output.
With certain discs, loud noise is
produced or play stops.
When the auto cue function is set
ON, track search is not finished.
Back cue function cannot be carried
out even though the CUE button is
pressed in playback mode.
Pressing the LOOP OUT button
does not start loop play.
The jog dial does not operate as
desired.
The picture of the TV screen is
fluctuated or FM broadcast is
interfered with noise.
The disc is not rotating when power
is ON.
Probable Diagnosis
¶ Power plug is disconnected from outlet.
¶ The auto cue function is set to on.
¶ Disc is loaded upside down.
¶ Smudges on the disc, etc.
¶ Format is wrong.
¶ You attempted to search (fast forward/reverse) for
files in a different folder.
¶ Output cables are connected incorrectly or are
loose.
¶ Incorrect operation of audio mixer.
¶ Pin plugs and/or terminals are dirty.
¶ Player is in pause mode.
¶ Output cables are connected incorrectly or are
loose.
¶ Pin plugs and/or terminals are dirty.
¶ Interference is being picked up from a TV set.
¶ Disc has a bad scratch or warp.
¶ Disc is extremely dirty.
¶ If the sound muted portion between selections is
long, searching time will be long.
¶ If the point cannot be found within ten seconds,
the cue point is set at the track’s beginning.
¶ The cue point is not set yet.
¶ In the case of MP3, back cue cannot be per-
formed if no cue point is located within the
currently playing folder.
¶ No cue points (or loop-in points) have been set.
¶ In the case of MP3, loop cannot be performed if
no loop-in point is located within the currently
playing track.
¶ Incorrect JOG MODE (VINYL/CDJ) is set.
¶ Interference is being picked up from the CD
player.
¶ The disc rotation stops automatically if no
operation has been performed for 100 minutes or
more in pause mode.
¶ After the disc’s final track finishes playing, if the
[END] display continues for 100 minutes without
any further operation input, disc rotation will
automatically stop.
Remedy
¶ Connect plug to wall outlet.
¶ Hold down the TIME MODE/AUTO CUE
button for 1 second or longer to turn off the
auto cue function.
¶ Load the disc correctly with the label side up.
¶ Clean the smudges from the disc.
¶ See section “Playing MP3 files” on page 10.
¶ MP3 searches can be performed only within
the same folder.
¶ Recheck connections.
¶ Check the settings of the audio mixer
switches and sound volume controls.
¶ Clean away dirt.
¶ Press the PLAY/PAUSE button (6).
¶ Connect to audio mixer's LINE INPUT
terminals. (Do not connect to MIC terminals.)
¶ Clean away dirt.
¶ Switch OFF TV set, move player away from TV
set.
¶ Replace disc.
¶ Clean disc.
¶ Press TIME MODE/AUTO CUE button for
more than 1 second to set the auto cue
function OFF.
¶ Set the cue point. (See page 25.)
¶ Set a cue point (or a loop-in point).
¶ Press the JOG MODE VINYL button to set
the desired JOG MODE (VINYL or CDJ).
¶ Turn off POWER switch of the player, or move
the player away from the TV or tuner.
¶ Playback can be started by pressing the PLAY/
PAUSE button (6). Press the EJECT button
(0) to eject the disc.
¶ This component may fail to operate properly due to influence of static electricity or other external influences. In this case, try turning
off the POWER switch, and turn on the power again only when the disc has fully stopped rotating.
¶ This unit cannot play partially recorded CD-R or CD-RW discs that have not been finalized.
¶ This unit plays only standard 12 cm discs and 8 cm discs mounted in proper disc adapters; it cannot play irregularly shaped discs
(damage or malfunctions may occur).
¶ BPM values measured with this unit may differ from published values found on CD labels, or those measured on Pioneer DJ mixers.
This is a result of differences in BPM measuring methods, and is not a malfunction.
¶ When playing CD-R/RW discs, some degradation in performance may be experienced depending on the recording quality of the
individual disc.

Question & answers

There are no questions about the Pioneer CDJ-800 MK2 yet.

Ask a question about the Pioneer CDJ-800 MK2

Have a question about the Pioneer CDJ-800 MK2 but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Pioneer CDJ-800 MK2. Please make sure that you describe your difficulty with the Pioneer CDJ-800 MK2 as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.