TAT3216 manual
Philips TAT3216manual

User manual for the Philips TAT3216 in English. This PDF manual has 17 pages.

PDF 17 1.1mb
Philips TAT3216manual
Previous page

View a manual of the Philips TAT3216 below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.


Question & answers

Have a question about the Philips TAT3216 but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Philips TAT3216. Please make sure that you describe your difficulty with the Philips TAT3216 as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.

Ask a question about the Philips TAT3216

Page: 1
User manual Register your product and get support at www.philips.com/support 3000 Series Headphones TAT3216
Page: 2
1 Important safety instructions 2 Hearing Safety 2 General information 2 2 Your True wireless earphones 3 What's in the box 3 Other devices 3 Overview of your True wireless earphones 4 3 Get started 5 Charge the battery 5 Pair the headphones with your Bluetooth device for the fist time 6 4 Use your headphones 7 Connect the headphones to your Bluetooth device 7 Control ANC (active noise cancelation) 7 Manage your calls and music 8 LED indicator status 8 Voice Assistant 9 5 Reset the headphones 10 6 Technical data 10 7 Notice 11 Declaration of conformity 11 Disposal of your old product and battery 11 Remove the integrated battery 11 Compliance with EMF 12 Environmental information 12 Notice of compliance 12 8 Trademarks 14 9 Frequently asked questions 15 Contents
Page: 3
1 Important safety instructions Hearing Safety Danger  To avoid hearing damage, limit the time you use headphones at high volume and set the volume to a safe level. The louder the volume, the shorter the safe listening time is. Be sure to observe the following guide- lines when using your headset. • Listen at reasonable volumes for reasonable periods of time. • Be careful not to adjust the volume continuously upwards as your hearing adapts. • Do not turn up the volume so high that you can't hear what's around you. • You should use caution or tempo- rarily discontinue use in potentially hazardous situations. • Excessive sound pressure from earphones and headphones can cause hearing loss. • Using headphones with both ears covered while driving is not recom- mended and may be illegal in some areas while driving. • For your safety, avoid distractions from music or phone calls while in traffic or other potentially dangerous environments. General information To avoid damage or malfunction: Caution  Do not expose headphones to excessive heat  Do not drop your headphones.  Headphones shall not be exposed to dripping , splashing water.  Do not allow your headphones to be submerged in water.  Do not use any cleaning agents containing alcohol, ammonia, benzene, or abrasives.  If cleaning is required use a soft doth, if necessary dampened with a minimum amount of water or diluted mild soap, to clean the product.  The integrated battery shall not be exposed to excessive heat such as sunshine, fire or the like.  Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. • Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, can result in an explosion; • Leaving a battery in an extremely high temperature surrounding environment can result in an explosion or the leakage of flammable liquid or gas; • A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas. About operating and storage temperatures and humidity • Store in a place where temperature is between -20°C (-4°F) and 50°C (122 °F) (up to 90% relative humidity. • Operate in a place where temperature is between 0°C (32°F) and 45°C (113 °F) (up to 90% relative humidity. • Battery life may be shorter in high or low temperature conditions. • Replacement of a battery with an incorrect type that can defeat a safeguard (for example, in the case of some lithium battery types);
Page: 4
2 Your True wireless earphones What's in the box Philips True wireless earphones Philips TAT3216 Replaceable rubber ear caps x 3 pairs Quick start guide Other devices A mobile phone or device (e.g. note- book, PDA, Bluetooth adapters, MP3 players etc) which supports Bluetooth and is compatible to the headset (see 'Technical data' on page 8). Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. With this Philips True wireless earphones, you can: • enjoy convenient wireless handsfree calls; • enjoy and control wireless music; • switch between calls and music. USB-C charging cable (for charging only) Global Warranty Safety leaflet
Page: 5
Overview of your Bluetooth wireless headphones 1. Touch panel 2. LED indicator (headphones) 3. LED indicator (Charging case) 4. Multiple function button 5. LED indicator 6. Type-C charging slot EN 6
Page: 6
3 Get started Charge the battery Charging Note  Before you use your earpieces for the first time, place the earpieces in the charging box and charge the battery for 2 hours for optimum battery capacity and lifetime.  Use only the original USB-C charging cable to avoid any damage.  Finish your call before charging the earpieces, as connecting the earpieces for charging will power the earpieces off. Place the headphones in the charging case and close the charging case cover. Connect one end of the USB cable into the charging box, and another end into the power source. • Charging process is verified by the LED light on the back panel. • When the charging box is fully charged, the light goes off. • When the charging box is 36% - 99% charged, the white color light is on. • When the charging box is 0% - 35% charged, the amber colour light is on. Tip  The charging box serves as a portable backup battery for charging the earpieces. When the charging box is fully charged, it supports 3 times full recharge cycle for the earpieces.  Normally, a full charge takes 2 hours (for the earpieces or charging box) by USB cable.  When the batter level of headset is too low, light of headset will blink amber light Start charging. Pair the headphones with your Bluetooth device for the fist time Open the top cover from charging box. The headset will power on automatically, entering pairing model and Right & Left headset connected. Light on both headsets is blinking (white and blue) The headset is now in pairing mode and is ready to pair with a Bluetooth device (e.g. a mobile phone). Make sure that the headset is fully charged and powered off. Turn on the Bluetooth function of your Bluetooth device. Pair the headphones with your Bluetooth device. Refer to the user manual of your Bluetooth device. Note  After powering on, if the earpieces cannot find any previously connected Bluetooth device, it will automatically switch to pairing mode.
Page: 7
Turn on the Bluetooth function of your Bluetooth device, select Philips TAT3216. The following example shows you how to pair the earpieces with your Bluetooth device. Enter the earpieces password “0000” (4 zeros) if prompted. For those Bluetooth devices featuring Bluetooth 3.0 or higher, no need to enter a password. Philips TAT3216 Note Using as a Single earpiece (Mono mode) Take either right or Left earpiece out from charging box for Mono use. The earpiece will power on automatically. There will be a voice “Power on” from earpiece. Note  Take the second Earpiece from the charging box and they will pair each other automatically.  The earpieces stores 4 device in the memory. If you try to pair more than 4 devices, the earliest paired device is replaced by the new one. Pair the earpieces with another Bluetooth device If you have another Bluetooth device that you want to pair with the earpieces, make sure the Bluetooth function in any other previously paired or connected devices are turned off. Press and hold multiple function button for 3 second to enter Bluetooth pairing mode.
Page: 8
Switch caller during a call Right/Left earpiece Tap and hold for 2 seconds Tip Note  The earpieces cannot connect to more than 1 device at the same time. If you have two paired Bluetooth devices, only turn on the Bluetooth function of the device that you want to connect.  If you turn on the Bluetooth function of your Bluetooth device after turning on the earpieces, you have to go to the Bluetooth menu of the device and connect the earpieces to the device manully.  If the earpieces fails to connect to any Bluetooth device within 5 minutes, it will turn off automatically to save the battery life.  In some Bluetooth devices, connection may not be automatic. In this case, you have to go to the Bluetooth menu of your device and connect the earpieces to the Bluetooth device manually. The blue LED flashes. The earpieces will search the last connected Bluetooth device and reconnect to it automatical- ly. If the last connected device is not available, the earpieces will enter pairing mode. 4 Use your earpieces Turn on the Bluetooth function of your Bluetooth device. Task Turn the earpieces on Open charging case's cover close the charging case's cover Turn the earpieces off Open the top cover from charging box. Connect the headphones to your Bluetooth device Power on/off Touch / Button Operation Music control Play or pause music Skip forward Right/Left earpiece Right/Left earpiece Tap 2 times Skip backward Tap 3 times Adjust volume +/- Call control Pick up/hang up a call Reject an incoming call Right/Left earpiece Tap and hold for 2 seconds Right/Left earpiece Single tap Task Touch control Operation Via mobile phone control Right/Left earpiece Single tap Manage your calls and music Task Touch control Operation
Page: 9
EN How to wear LED indicator status The earpieces are connected to a Bluetooth device. The earpieces are ready for pairing The earpieces are on but not connected to a Bluetooth device Low battery level (earpieces) You will hear 'battery low' on the headset. The blue & white LED flash alternately If no connection can be made after 1 minute, the headset will enter pairing mode for 2 minuets. The blue and white LED will flash. Blue LED flashes for 1 second Headphones status Indicator Battery is fully charged (charging box). 100%: Light goes off 36% - 99% : White colour 0% - 35% : Amber colour
Page: 10
5 Factory reset the headphones If you encounter any pairing or connection issue, you can follow the following procedure to factory reset your headphones. On your Bluetooth device, go to the Bluetooth menu and remove Philips TAT3216 from the device list. Put both headphones back to charging case and open charging case cover. Press multiple function button on charging case for 3 times. Follow section of "Pair the headset with your Bluetooth device at the first time" to pair your Bluetooth device. Bluetooth device. EN
Page: 11
6 Technical data Note • notice Earpieces Music time: 6 hours (additional 18 Note If safety relevant, the following information should be included as far as applicable: • minimum distances around the apparatus for sufficient ventilation; • the ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc. ; • no naked flame sources, such as lighted candles, should be placed on the apparatus; • Observe and follow local regulations regarding battery disposal. • the use of apparatus in tropical and/or moderate climates. hrs wiht charging case) Talk time: 5 hours (additional 15 hrs with charging case) Standby time: 80 hours Charging time: 2 hours Rechargeable lithiumion battery: 55 mAH on each earpiece Bluetooth version: 5.0 Compatible Bluetooth pro les: • A2DP (Advanced Audio Distribution Pro le) • AVRCP (Audio Video Remote Control Pro le) Supported audio codec: SBC Frequency range: 2.402-2.480 GHz Transmitter power: < 10 dBm Operating range: Up to 10 meters (33 feet) Charging case Charging time: 2 hrs Rechargeable Li-ion battery: 550mAh EN
Page: 12
7 Notice Hereby, MMD Hong Kong Holding Limited declares that this product is in compli- ance with the essential requirements and other relevant provisions of Directive 2014/53/EU. You can find the Declaration of Conformity on www.p4c.philips.com. Declaration of conformity Disposal of your old product and battery Your product is designed and manufac- tured with high quality materials and components, which can be recycled and reused. This symbol on a product means that the product is covered by European Directive 2012/19/EU. This symbol means that the product contains a built-in rechargeable battery covered by European Directive 2013/56/EU which cannot be disposed of with normal household waste. We strongly advise you to take your product to an official collection point or a Philips service centre to have a professional remove the rechargeable battery. Inform yourself about the local separate collection system for electrical and electronic products and rechargeable batteries. Follow local rules and never dispose of the product and rechargeable batteries with normal household waste. Correct disposal of old products and rechargeable batteries helps prevent negative consequences for the environ- ment and human health. Remove the integrated battery If there is no collection/recycling system for electronic products in your country, you can protect the environment by removing and recycling the battery before disposing the headphones. • Make sure the earpieces is discon- nected from the charging box before removing the battery. • Make sure the charging box is disconnected from the USB charging cable before removing the battery.
Page: 13
Compliance with EMF This product complies with all applica- ble standards and regulations regarding exposure to electromagnetic fields. Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.) Your system consists of materials which can be recycled and reused if disassem- bled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment. Notice of compliance The device complies with the FCC rules, Part 15. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. FCC rules This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protec- tion against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Canada: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Develop- ment Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1)This device may not cause interference. (2)This device must accept any interference, including interference that may cause undesired operation of the device. Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Page: 14
8 Trademarks The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by MMD Hong Kong Holding Limited is under license. Other trade- marks and trade names are those of their respective owners. Bluetooth Siri is a trademark of Apple Inc., regis- tered in the U.S. and other countries. Siri Google and Google Play are trademarks of Google LLC. Google
Page: 15
9 Frequently asked questions My Bluetooth headphones does not turn on. The battery level is low. Charge the headset. I cannot pair my Bluetooth headphones with my Bluetooth device. The Bluetooth is disabled. Enable the Bluetooth feature on your Bluetooth device and turn on the Bluetooth device before you turn on the headset. Pairing does not work. • Put both earpieces into charging box. • Make sure you have disabled the Bluetooth function of any previously connected Bluetooth devices. • On your Bluetooth device, delete “Philips TAT3216” from the Bluetooth list. • See "Factory reset the headset" The Bluetooth device cannot find the headphones. • The headset may be connected to a previously paired device. Turn off the connected device or move it out of range. • Pairing may have been reset or the headset has been previously paired with another device. Pair the headset with the Bluetoot device again as described in the user manual. (see ‘Pair the headset with your Bluetooth device at the fist time’ on page 6). My Bluetooth headphones is connected to a Bluetooth stereo enabled mobile phone, but music only plays on the mobile phone speaker. Refer to the user manual of your mobile phone. Select to listen to music through the headphones. The audio quality is poor and crackling noise can be heard. • The Bluetooth device is out of range. Reduce the distance between your headset and Bluetooth device, or remove obstacles between them. • Charge your headset. The audio quality is poor when streaming from the mobile phone is very slow, or audio streaming does not work at all. Make sure your mobile phone not only supports (mono) HSP/HFP but alos supports A2DP and is BT4.0x (or higher) compatible (see ‘Technical data’ on page 10).
Page: 16
Philips and Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by and is sold under the responsibility of MMD Hong Kong Limited is the warrantor in relation to this product. UM_TAT3216_00_EN_V0.1
Not categorized
Available languages: