TAA3206 manual
Philips TAA3206manual

User manual for the Philips TAA3206 in English. This PDF manual has 14 pages.

PDF 14 1.1mb
Philips TAA3206manual
Previous page

View a manual of the Philips TAA3206 below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.


Question & answers

Have a question about the Philips TAA3206 but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Philips TAA3206. Please make sure that you describe your difficulty with the Philips TAA3206 as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.

Ask a question about the Philips TAA3206

Page: 1
User manual Register your product and get support at www.philips.com/support Headphones 3000 Series TAA3206
Page: 2
1 Important safety instructions 2 Hearing Safety 2 General information 2 2 Your Bluetooth in-ear headphones 3 What's in the box 3 Other devices 3 Overview of your Bluetooth wireless headphone 4 3 Get started 5 Charge the battery 5 Pair the headphones with your mobile phone 5 4 Use your headphones 6 Connect the headphones to a Bluetooth device 6 Manage your calls and music 6 5 Technical data 8 6 Notice 9 Declaration of conformity 9 Disposal of your old product and battery 9 Remove the integrated battery 9 Compliance with EMF 9 Environmental information 10 Notice of compliance 10 7 Trademarks 11 8 Frequently asked questions 12 Contents
Page: 3
1 Important safety instructions Hearing Safety  To avoid hearing damage, limit the time you use headphones at high volume and set the volume to a safe level. The louder the volume, the shorter the safe listening time is. Be sure to observe the following guide- lines when using your earpieces. • Listen at reasonable volumes for reasonable periods of time. • Be careful not to adjust the volume continuously upwards as your hearing adapts. • Do not turn up the volume so high that you can't hear what's around you. • You should use caution or tempo- rarily discontinue use in potentially hazardous situations. • Excessive sound pressure from earphones and headphones can cause hearing loss. • Using headphones with both ears covered while driving is not recom- mended and may be illegal in some areas while driving. • For your safety, avoid distractions from music or phone calls while in traffic or other potentially dangerous environments. General information To avoid damage or malfunction:  Do not expose headphones to excessive heat  Do not drop your headphones.  Headphones shall not be exposed to dripping or splashing.  Do not allow your headphones to be submerged in water.  Do not use any cleaning agents containing alcohol, ammonia, benzene, or abrasives.  If cleaning is required use a soft doth, if necessary dampened with a minimum amount of water or diluted mild soap, to clean the product.  The integrated battery shall not be exposed to excessive heat such as sunshine, fire or the like.  Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. Danger Caution About operating and storage temperatures and humidity • Store in a place where temperature is between -20°C (-4°F) and 50°C (122 °F) (up to 90% relative humidity. • Operate in a place where temperature is between 0°C (32°F) and 45°C (113 °F) (up to 90% relative humidity. • Battery life may be shorter in high or low temperature conditions. • Replacement of a battery with an incorrect type that can defeat a safeguard (for example, in the case of some lithium battery types); • Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, can result in an explosion; • Leaving a battery in an extremely high temperature surrounding environment can result in an explosion or the leakage of flammable liquid or gas; • A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
Page: 4
2 Your Bluetooth in-ear headphones What's in the box Philips Bluetooth in-ear headphones Philips TAA3206 ear caps, ear hooks, ear fins Quick start guide Other devices A mobile phone or device (e.g. note- book, PDA, Bluetooth adapters, MP3 players etc) which supports Bluetooth and is compatible to the headphone (see 'Technical data' on page 8). Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. With this Philips in-ear headphones, you can: • enjoy convenient wireless handsfree calls; • enjoy and control wireless music; • switch between calls and music. Type-C charging cable (for charging only) shirt clip Global Warranty Safety leaflet
Page: 5
Overview of your Bluetooth wireless headphone  Volume +  Power button  Volume -  LED indicator  Microphone  Type C charging slot 1 2 3 4 5 6
Page: 6
3 Get started Charge the battery Note  Before you use your headphone for the first time, place the headphones in the charging case and charge the battery for 2 hours for optimum battery capacity and lifetime.  Use only the original USB charging cable to avoid any damage.  Finish your call before charging the headphone, as connecting the headphone for charging will power the headphone off. Connect the supplied Type C charging cable to: • Type C charging slot on the head- phones and; • The charger/USB port of a computer. Tip  Normally, a full charge takes 2 hours. Pair the headphones with your mobile phone Make sure that the headphones are fully charged and turned off. The headphone remain in pairing mode for 5 minutes. Before you use the headphones with your mobile phone for the first time, pair it with a mobile phone. A successful pairing establishes a unique encrypted link between the headphones and mobile phone. The headphones store the last 8 devices in the memory. If you try to pair more than 8 devices, the earliest paired device is replaced by the new one. LED turns white during charging and turns off when the headphones in fully charged. Press and hold for 5 seconds until the blue and white LED flashes alternately. Philips TAA3206 Make sure that the mobile phone is turned on and its Bluetooth feature is activated. The following example shows you how to pair the headphones with your mobile phone. Pair the headphones with the mobile phone. For detailed infor- mation, refer to the user manual of your mobile phone. Activate the Bluetooth feature of your mobile phone, select Philips TAA3206 Enter the headphone password “0000” (4 zeros) if prompted. For those mobile phones featuring Bluetooth 3.0 or higher, no need to enter a password.
Page: 7
4 Use your headphone Connect the headphone to your Bluetooth device Turn on your mobile phone/ Bluetooth device. Press and hold the on/off button to turn the headphones on. The blue LED is on 1s. The headphones are recon- nected to the last connected mobile phone/ Bluetooth device automatically. If the last one is not available, the headphones will be in pairing mode. Manage your calls and music On/off Task Button Operation Turn the head- phones on. Power button Press and hold for 2 seconds. Turn the head- phones off. Power button Press and hold for 4 seconds. The blue LED is on 1 second. Music control Task Button Operation Power button Play or pause music. Press once. Press once. Long press. Long press. Adjust volume. Next track. Previous track. Call control Task Button Operation Pick up/ hang up a call. Switch caller during a call. Power button Power button Press once. Press twice. Tip  If you turn on the mobile phone/Bluetooth device or activate the Bluetooth feature after turning on the headphones, you have to reconnect the headphones and mobile phone/Bluetooth device manually.  If the headphones fail to connect to any Bluetooth device within range in 5 minutes, it will switch off automatically to save the battery life. Note
Page: 8
Other headphones indicator status Headphones status Indicator The headphones are connected to a Bluetooth device, while the headphones in standby mode or while you are listening to music. The blue LED flashes for every 4 seconds The headphones are ready for pairing. The LED flashes blue and white alternately. The headphones are on but not connected to a Bluetooth device. The white LED flashes for every 3 seconds. If no connection can be made, the headphones will turn itself off within 5 minutes. Low battery level. The white LED flashes once for every 3 seconds until it is out of power. Battery is fully charged. White LED is off.
Page: 9
5 Technical data Note  Specifications are subject to change without notice. Music time: 10 hours Talk time: 10 hours Standby time: 55 hours Charging time: 2 hours Rechargeable lithium polymer battery (85 mAh) Bluetooth version: 5.0 Compatible Bluetooth profiles: • HFP (Hands-Free Profile-HFP) • A2DP (Advanced Audio Distri- bution Profile) • AVRCP (Audio Video Remote Control Profile) Supported audio codec: SBC Frequency range: 2.402-2.480 GHz Transmitter power: < 10 dBm Operating range: Up to 10 meters (33 feet) Digital echo & noise reduction Auto power off USB-C port for charging Supports SBC Low battery warning: available
Page: 10
Remove the integrated battery 6 Notice Hereby, MMD Hong Kong Holding Limited declares that this product is in compli- ance with the essential requirements and other relevant provisions of Directive 2014/53/EU. You can find the Declaration of Conformity on www.p4c.philips.com. Declaration of conformity Disposal of your old product and battery Your product is designed and manufac- tured with high quality materials and components, which can be recycled and reused. This symbol on a product means that the product is covered by European Directive 2012/19/EU. This symbol means that the product contains a built-in rechargeable battery covered by European Directive 2013/56/EU which cannot be disposed of with normal household waste. We strongly advise you to take your product to an official collection point or a Philips service centre to have a professional remove the rechargeable battery. Inform yourself about the local separate collection system for electrical and electronic products and rechargeable batteries. Follow local rules and never dispose of the product and rechargeable batteries with normal household waste. Correct disposal of old products and rechargeable batteries helps prevent negative consequences for the environ- ment and human health. If there is no collection/recycling system for electronic products in your country, you can protect the environment by removing and recycling the battery before disposing the headphones. • Make sure the headphone is disconnected from the charging case before removing the battery. Compliance with EMF This product complies with all applica- ble standards and regulations regarding exposure to electromagnetic fields.
Page: 11
Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.) Your system consists of materials which can be recycled and reused if disassem- bled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment. Notice of compliance The device complies with the FCC rules, Part 15. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. FCC rules This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protec- tion against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Canada: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence- exempt RSS(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) This device must accept any interfer- ence received, including interference that may cause undesired operation of the device. CAN ICES-3(B)/NMB-3(B) IC Radiation Exposure Statement: This equipment complies with Canada radiation exposure limits set forth for uncontrolled environments. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Page: 12
7 Trademarks The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by MMD Hong Kong Holding Limited is under license. Other trade- marks and trade names are those of their respective owners. Bluetooth Siri is a trademark of Apple Inc., regis- tered in the U.S. and other countries. Siri
Page: 13
8 Frequently asked questions My Bluetooth headphone does not turn on. The battery level is low. Charge the headphone. I cannot pair my Bluetooth headphones with my Bluetooth device. The Bluetooth is disabled. Enable the Bluetooth feature on your Bluetooth device and turn on the Bluetooth device before you turn on the headphone. The Bluetooth device cannot find the headphone. • The headphone may be connected to a previously paired device. Turn off the connected device or move it out of range. • Pairing may have been reset or the headphone has been previously paired with another device. Pair the headphone with the Bluetoot device again as described in the user manual. (see ‘Pair the headphone with your Bluetooth device at the fist time’ on page 6). My Bluetooth headphone is connected to a Bluetooth stereo enabled mobile phone, but music only plays on the mobile phone speaker. Refer to the user manual of your mobile phone. Select to listen to music through the headphone. The audio quality is poor and crackling noise can be heard. • The Bluetooth device is out of range. Reduce the distance between your headphone and Bluetooth device, or remove obstacles between them. • Charge your headphone. The audio quality is poor when streaming from the mobile phone is very slow, or audio streaming does not work at all. Make sure your mobile phone not only supports (mono) HFP but alos supports A2DP and is BT4.0x (or higher) compatible (see ‘Technical data’ on page 8). I hear but cannot control music on my Bluetooth device (e.g. play/pause/skip forward/backward). Make sure the Bluetooth audio source supports AVRCP (see ‘Technical data’ on page 8). The volume level of the headphone is toot low. Some Bluetooth devices cannot link the volume level with the headphone through volume sync. In this case, you have to adjust the volume on your Bluetooth device independently to achieve an appropriate volume level. I cannot connect the headphone to another device, what do I do? • make sure the Bluetooth function of the previous paired device is turned off. • Repeat the pairing procedure on your second device (see ‘Pair the headphone with your Bluetooth device at the first time’ on page 6). For further support, visit www.philips.com/support.
Page: 14
Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by and is sold under the responsibility of MMD Hong Kong Holding Limited or one of its affiliates, and MMD Hong Kong Holding Limited is the warrantor in relation to this product. UM_TAA3206_00_EN_V1.0
Not categorized
Available languages: