Philips RWSS9512 manual

Page: 0

Register your product and get support at
www.philips.com/welcome
Always there to help you
Gebruiksaanwijzing
Manual do utilizador
Руководство пользователя
用户手册
使用手冊
User manual
Benutzerhandbuch
Manual del usuario
Mode d’emploi
Manuale utente
RWSS9512
Question?
Contact
Philips

Page: 1

3
E
n
g
l
i
s
h
EN
Contents
1	 Notice   4
Compliance   4
Important   4
2	 Connect   5
Place the wireless receiver   5
Connect the wireless transmitter   5
Connect rear speakers to wireless
receiver   6
Connect power cord   6
3	 Troubleshooting   6
4	 Product specifications   7

Page: 2

4 EN
1	Notice
Compliance
This product complies with the radio
interference requirements of the European
Community.
* Wireless and Ethernet LAN functions are
authorized for indoor use only.
Hereby, Philips Consumer Lifestyle, declares that
this product is in compliance with the essential
requirements and other relevant provisions of
Directive 1999/5/EC.
A copy of the EC declaration of Conformity
is available in the Portable Document Format
(PDF) version of the user manual at www.
philips.com/support.
Important
Read and understand all instructions before you
use your product. If damage is caused by failure
to follow instructions, the warranty does not
apply.
Safety
Risk of electric shock or fire!
•	 Never expose the product and accessories
to rain or water. Never place liquid
containers, such as vases, near the product.
If liquids are spilt on or into the product,
disconnect it from the power outlet
immediately. Contact Philips Consumer
Care to have the product checked before
use.
•	 Never place the product and accessories
near naked flames or other heat sources,
including direct sunlight.
•
• Never insert objects into the ventilation
slots or other openings on the product.
•
• Where the mains plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
•
• Disconnect the product from the power
outlet before lightning storms.
•
• When you disconnect the power cord,
always pull the plug, never the cable.
Risk of short circuit or fire!
•
• Before you connect the product to the
power outlet, ensure that the power
voltage matches the value printed on the
back or bottom of the product. Never
connect the product to the power outlet if
the voltage is different.
Risk of injury or damage to the product!
•
• Never place the product or any objects
on power cords or on other electrical
equipment.
•
• If the product is transported in
temperatures below 5°C, unpack the
product and wait until its temperature
matches room temperature before
connecting it to the power outlet.
Risk of overheating!
•
• Never install this product in a confined
space.Always leave a space of at least four
inches around the product for ventilation.
Ensure curtains or other objects never
cover the ventilation slots on the product.
This is CLASS II apparatus with double
insulation, and no protective earth provided.

Page: 3

5
E
n
g
l
i
s
h
EN
Care of the environment
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When this crossed-out wheeled bin symbol is
attached to a product it means that the product
is covered by the European Directive 2002/96/
EC. Please inform yourself about the local
separate collection system for electrical and
electronic products.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste.
Correct disposal of your old product helps to
prevent potential negative consequences for the
environment and human health.
Your product contains batteries covered by the
European Directive 2006/66/EC, which cannot
be disposed with normal household waste.
Please inform yourself about the local rules
on separate collection of batteries because
correct disposal helps to prevent negative
consequences for the environmental and
human health.
2	Connect
Place the wireless receiver
Place the wireless receiver near the AC outlet
and in between the rear speakers.Align the
wireless receiver with the home theater, with
Philips logo facing the home theater.
Note
•
• For best reception, make sure that the line-of-site
between the wireless receiver and the home theater is
not blocked by furniture, walls and other objects.
Connect the wireless
transmitter
Connect the wireless transmitter to the
Wireless Rear Audio connector on the back of
the home theater.
WIRELESS
RECEIVER

Page: 4

6 EN
Connect rear speakers to
wireless receiver
Note
•
• The rear speakers in the picture showed may vary.
Connect the rear left and rear right speakers
to the matching connectors at the back of the
wireless receiver.
Connect power cord
Warning
•
• Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the back
or the underside of the product.
Connect the power cords for home theater,
wireless receiver and other devices after you
have made all of the other connections.
»
» The wireless indicator lights and the
wireless receiver is ready to use.
REAR
LEFT
REAR LEFT
REAR RIGHT
~AC MAINS
REAR
RIGHT
3	Troubleshooting
Follow these steps if:
•	 there is no sound from the rear speakers,
and
•	 the indicator on the wireless receiver blinks
continuously for more than one minute.
1	 Connect the home theater, wireless
transmitter, and wireless receiver correctly
(see 'Connect' on page 5).
2	 Insert a pin into the pairing pinhole at the
back of the wireless receiver.
»
» The indicator on the wireless receiver
blinks for thirty seconds. Complete the
remaining steps within thirty seconds.
3	 Switch the home theater to either AUX
source or MUSIC iLINK source.
4	 Press and hold the Navigation button
(right) until PAIRING (PAIRING) blinks on
the home theater display panel.
»
» 'PAIRED (PAIRED) is displayed.
•	 If FAILED (FAILED) is displayed, repeat
steps 1 to 4.

Page: 5

7
E
n
g
l
i
s
h
EN
4	Product
specifications
Note
•
• Specification and design are subject to change without
notice.
Wireless receiver
•
• Power supply rating: 110-240V; ~50-60 Hz
•
• Total output power: 375W RMS (+/- 0.5
dB, 30%THD) / 300W RMS (+/- 0.5 dB,
10%THD)
•
• Power consumption: 40 W
•
• Standby power consumption: ≤ 0.5 W
•
• Frequency response: 150 Hz ~ 20 kHz
•
• S/N Ratio: 65 dB (A-Weighted)
•
• Distortion: 1%
•
• Dimensions (WxHxD):
265 x 116 x 106 (mm)
•
• Weight: 1.3 kg
Wireless transmitter
•
• RF frequency: 5.8 GHz
•
• Dimensions (WxHxD): 30 x 8 x 53 (mm)
•
• Weight: 0.009 kg

Page: 6

Specifications are subject to change without notice
© 2012 Koninklijke Philips Electronics N.V.
All rights reserved.
RWSS9512_00_UM_V1.0