Philips PerfectDraft HD3620 manual

Select a language NL 100%
manual_loading

View a manual of the Philips PerfectDraft HD3620 below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Philips
  • Product: Beertender
  • Model/name: PerfectDraft HD3620
  • Filetype: PDF
  • Available languages: Dutch, English, German, French, Italian

Table of Contents

Page: 5
6
Introduction
Congratulations on purchasing this new PerfectDraft. From now on you can
enjoy the perfect taste of fresh, cold draft beer at home.The system keeps
your beer fresh and at exactly the right temperature so that you can pour
a cold beer whenever you feel like it. Several beer brands are available for
this system.You can find the beer brands available in your country on the
box of the PerfectDraft system (also see chapter ‘Keg suppliers’ at the end
of user manual).You can visit our website at www.perfectdraft.com for
more information.
The PerfectDraft system is intended for home use only. It is not suitable for
professional use.
This user manual tells you how to use the PerfectDraft.
General description (Fig. 1)
A	 Right door
B	 Release button
C	 Cooling plate
D	 Cord storage facility
E	 LCD display: beer temperature, beer level & freshness indication
F	 Keg sensor
G	 Temperature sensor
H	 Left door
I	 Locking levers
J	 Drip tray cover
K	 Drip tray
L	 Tube connector
M	 Tube
Tap unit
N	 Medallion 
O	 Tap handle
P	 Tap body
Q	 Spout
R	 Release buttons
S	 Tube release button
Keg
T	 Connection top
U	 Protection cap
V	 Chimes
Important
Read this user manual carefully before you use the appliance and save it for
future reference.
English
Page: 6
The appliance
,
, If the mains cord is damaged, you must have it replaced by Philips, a
service centre authorised by Philips or similarly qualified persons in
order to avoid a hazard.
,
, Check if the voltage indicated on the bottom of the appliance
corresponds to the local mains voltage before you connect the
appliance.
,
, Do not use the appliance when the mains cord, the plug or the
appliance itself is damaged.
,
, Keep the appliance out of the reach of children.The handle can be
removed for extra safety.
,
, Put the appliance on a horizontal, even and stable surface. Leave at
least 10cm free space around the appliance for the best performance.
,
, In an environment with an ambient temperature of 23°C, it takes
approximately 12 to 15 hours to chill an uncooled keg to the ideal
drinking temperature of 3°C.At higher ambient temperatures,
chilling the keg takes longer.
,
, When you use the appliance above 32°C, the beer temperature may
rise above 3°C.When the temperature decreases to below 32°C, the
beer temperature drops to 3°C again.
,
, Do not expose the appliance to direct sunlight.
,
, Always clean the appliance before you store it for a longer period.
,
, Do not lift the appliance by the tap handle.
,
, Do not cover the appliance (e.g. with a towel) to prevent it from
overheating.
The keg
,
, Always read and follow the instructions and safety warnings on the
keg before you install it in the appliance.
,
, Do not shake the keg.
,
, Store an open keg at the right temperature by leaving it in the
appliance. Make sure the appliance is switched on. If you switch
off the appliance because you are not going to use it for a longer
period (e.g. a holiday), always remove the open keg from the
appliance and put it in the fridge. Once a keg has been opened, the
beer stays fresh for 30 days.
,
, Never store the keg in the freezer! Freezing may cause serious
damage to the keg.
,
, To avoid the risk of explosion, do not expose the keg to direct
sunlight or temperatures higher than 30°C.
,
, Always check the expiry date on the keg when you buy it and before
you install it.
,
, Do not use the keg if the connection top is damaged. If the
connection top is damaged, the tap unit does not fit onto it.
,
, Unopened kegs keep best when you store them at a stable
temperature.The cooler you store the keg, the better.
English 7
Page: 7
,
, The keg is under pressure. Do not remove the connection top or
pierce the keg with a sharp object.
,
, Maximum working pressure: 1.5 bar.
,
, Use the keg only for the HD3620/HD3600 PerfectDraft. Do not
connect other equipment to the keg.
,
, Do not use kegs from other suppliers than the ones mentioned in
this user manual (see chapter ‘Keg suppliers’).
,
, Do not use damaged kegs in this appliance, as this could harm the
appliance. Return a damaged keg immediately to the shop where you
bought it.
,
, The kegs are not stackable.
Electromagnetic fields (EMF)
This Philips appliance complies with all standards regarding electromagnetic
fields (EMF). If handled properly and according to the instructions in this
user manual, the appliance is safe to use based on scientific evidence
available today.
Preparing for use
Installing the appliance
	1		Put the appliance on a horizontal, even and stable surface. Leave at
least 10cm free space around the appliance for the best performance.
Note: Do not put the appliance in a place where it is exposed to direct sunlight
or to high temperatures (e.g. close to a cooker or an oven).
	2		To store excess cord, push it into the storage compartment at the
back of the appliance.
	3		Insert the plug into the wall socket.
	4		Install the drip tray.
	5		Attach the tap handle.
English
8
Page: 8
	6		Place the preferred medallion on top of the handle.
Placing the tap unit onto the keg
Always clean the tap unit with hot water and, if necessary, with some
washing-up liquid before you place it on the keg and insert the tube.
	1		Remove the protection cap and the tube from the keg.
	2		Put the tap unit onto the connection top of the keg by pushing it
down firmly (‘click’).
If you snap the tap unit onto the keg correctly, it fits nicely between the
two chimes of the keg.
Tip: If you can move the arm of the connection top freely up and down, the tap
unit is placed properly on the keg.
Placing the tube into the tap unit
	1		Insert the flexible tube into the tap body.
English 9
Page: 9
	2		Slide the projections of the tube connector under the hinge points.
	3		Push the tube connector into the opening in the tap unit (‘click’).
Placing the keg into the appliance
Never place the keg into the appliance if you have not assembled the tap
unit and the tube properly. See sections ‘Placing the tap unit onto the
keg’ and ‘Placing the tube into the tap unit’ in this chapter.
	1		Slide the release button to the right to open the doors.
	2		Lift the two blue locking levers completely.
	3		Tilt the keg with the assembled tap unit slightly forward and put it
into the appliance.
-
- First put the keg on the cooling plate of the appliance.
-
- Then put the keg upright by sliding the tap unit between the blue
locking levers.
English
10
Page: 10
	4		Push down the blue locking levers until they are in horizontal
position.
If you are unable to put the locking levers in horizontal position, you have
not put the keg into the appliance in the right position.Take out the keg
and follow steps 1 to 3 again.
,
, After you have installed the keg (even the first time), the pump runs
for a few seconds.
	5		Close the doors.
Cooling
After you have installed the keg, the appliance automatically starts to cool
the keg. 
Note:At an ambient temperature of 23°C, chilling an uncooled keg takes
12-15 hours.
Tip:If you want to pour beer shortly after placing the keg in the appliance,
prechill the keg in upright position in the fridge for a while before you install it.
For more tips, see chapter ‘Troubleshooting’.
	1		Wait until the beer has reached a drinking temperature of 4°C or
below.
,
, The temperature is shown on the display in green (see section ‘LCD
display’ in this chapter).
LCD display
,
, The display shows the temperature of the beer, the beer level inside
the keg and the freshness of the beer.
Temperature indication
Wait until the temperature of the keg has dropped below 4°C before you
start to pour beer.The ideal drinking temperature is 3°C.
The colour of the temperature displayed tells you if the beer has reached
the right drinking temperature.
-
- Red = the beer temperature is not yet ideal for consumption (above
4°C).The beer head may be too large.
-
- Green = the beer has reached the right temperature (4°C or below)
for consumption.
Level indication
The yellow-orange level indication on the display shows the amount of
beer left in the keg in eight steps.
English 11
Page: 11
Note: If you use 20cl glasses, you can pour approx. 30 glasses of beer from
one keg. If you use 33cl glasses, you can pour approx. 18 glasses.
Freshness indication
The freshness indication tells you how long the beer is still fresh.
-
- When you place a new keg in the appliance, the freshness
indication shows that the beer in the keg stays fresh for 30 days.The
indication counts down from 30 to 0 days.
-
- Once the keg has been opened, the beer stays fresh for 30 days if the
keg is stored in the appliance
Make sure the appliance is switched on all the time.
-
- When 30 days have passed, the display shows that the keg needs to be
replaced.A dash and an exclamation mark appear on the display.
  
Adapting the freshness indication
-
- If you want to switch off the appliance for a longer period (e.g. a
holiday), store the opened keg in the fridge. Disconnect the tap unit,
rinse the top of the keg, rinse the tube and store the tube with the keg
in the fridge.
Always write down the date and the number of days that the beer inside
the keg is still fresh on the keg (see number of days on the display).
-
- When you reinstall the opened keg, you can set the freshness indicator
to the correct number of days with the – and + buttons.
Tip: To calculate the correct number of days: compare the date with the one
you have written on the keg and subtract the number of days the keg lay in
the fridge from the number you wrote on the keg when you stored it.
Other indications
Besides the beer level and temperature, the display gives the following
information:
-
- Green dash with no level indication visible = the tap unit is not present
on the keg.
-
- Red dash with no level indication visible = no keg is installed.
-
- Red or green dash with flashing yellow-orange background light = the
tap unit and/or tube are not properly placed. Remove the keg and
check if the tap unit and the tube are properly placed. See chapter
‘Preparing for use’, sections ‘Placing the tap unit onto the keg’ and
‘Placing the tube into the tap unit’. If this does not help, try another keg
with a new tube.
Other indications
-
- Red indicator light flashes = the tap unit and/or tube are not properly
placed.
How to pour a perfect beer
Follow the instructions below to pour a perfect beer.
Cleaning beer glasses
Always use clean beer glasses when you tap beer.
	1		Clean the glasses carefully in hot water with some washing-up liquid.
	2		Rinse the glasses thoroughly with cold tap water.
English
12
Page: 12
In this way you remove all grease and soap residues, which allows you to
pour a beer with a good head.
	3		Hold the glasses upside down to the light to check if they are free of
grease and soap residues.
The glasses are clean when the water runs down the surface evenly,
without revealing any stains.
Tip: If you clean beer glasses in the dishwasher, do not use a rinse agent. Rinse
agent residues may break down the foam head of the beer.
Pouring beer
	1		You get the best results if you pour the beer in a cool, clean and wet
glass!
Note:A cool glass ensures a more stable beer head. It also keeps freshly
poured beer fresh longer and helps to retain its sparkling quality. 
Note: For the best quality draft beer, always clean and rinse used
glasses before you use them again.This prevents foam residues of previously
poured beer from causing too much foam in freshly poured beer.
Note: When you have not poured beer for more than a week, it is
recommended to let beer flow into the glass for 1 second.Then rinse the glass
with cold water before you fill it with fresh beer.
	2		Hold the glass by the bottom or in the middle to make sure it stays
clean.
	3		Open the tap in one quick, smooth movement.
The beer only flows properly into the glass if the tap is completely open.
If the tap is only half open, the beer is forced through the tap, causing it to
foam more strongly.
Let the beer to flow down the inside of the glass.
	4		To vary the size of the beer head, vary the angle at which you hold
the glass under the spout and vary the distance between the glass
and the spout.
The more upright and the closer to the spout you hold the glass, the more
foam you obtain.
Note: Do not let the end of the spout touch the beer glass, the beer or the
beer head.Any beer residues present on the spout affect the forming of the
beer head.
	5		Slowly move the glass to vertical position while you pour your beer.
	6		Fill the glass until the foam almost flows over the rim of the glass.
	7		Close the tap in one smooth movement.
Note: The pump may go on.
	8		Europe (except Germany and the UK): For the best end result,
remove excess foam from the glass by moving a skimmer over the
rim of the glass at an angle of 45° in one smooth movement.
English 13
Page: 13
Note: Never leave the skimmer lying on the worktop, but put it in a clean glass
with fresh, cold water or rinse it right away. Only pass the skimmer over the
glass once, as further skimming has a negative effect on the quality of the beer
head.
,
, You now have a perfect draft beer.
Serving a freshly poured beer
	1		Dry the bottom of the glass by passing it over a cloth.
	2		Use a clean beer mat for your guest.
	3		Pick up the glass in the middle and serve the beer on the beer mat.
Make sure the beer brand logo (if present on the glass) faces your
guest.
3 different beer pouring traditions
Step European (except Germany
and UK)
German British
1 Rinse a glass and let it drain. Rinse a glass and let it drain. Rinse a glass and let
it drain.
2 Hold the glass next to the
opening of the spout.
Hold the glass under the
opening of the spout at an
angle of approx. 45°C.
Hold the glass under
the opening of the
spout at an angle of
approx. 45°C.
3 Open the tap fully in one
smooth movement.
Open the tap fully in one
smooth movement.
Open the tap fully
in one smooth
movement.
4 Move the glass under the
spout at an angle of approx.
45°C and let the beer flow
down the inside of the glass.
Let the beer flow down the
inside of the glass.
Let the beer flow
down the inside of
the glass.
5 Do not let the spout touch
theglass, the beer or the foam.
Do not let the spout touch
the glass, the beer or the
foam.
Do not let the spout
touch the glass, the
beer or the foam.
6 The angle at which you hold
the glass while you pour beer
determines the ultimate size
of the foam head.The more
upright you hold the glass,
the higher the foam head
becomes.
The angle at which you hold
the glass while you pour
beer determines the ultimate
size of the foam head.The
more upright you hold the
glass, the higher the foam
head becomes.
The angle at which
you hold the glass
while you pour beer
determines the
ultimate size of the
foam head.The more
upright you hold the
glass, the higher the
foam head becomes.
7 Fill the glass until the beer
almost flows over the rim of
the glass.
a. Let beer flow into the
glass until it contains two-
thirds beer and one-third
foam.
Fill the glass until the
beer almost flows
over the rim of the
glass.
English
14
Page: 14
Step European (except Germany
and UK)
German British
b. Close the tap and put the
glass down for 1 minute to
allow the foam to settle.
c. Repeat steps 2 to 6 and fill
the glass up to the rim.
8 Close the tap in one
smooth  movement.
Close the tap in one
smooth  movement.
Close the tap in one
smooth  movement.
9 a. Move the glass away from
the spout to prevent drops
of beer from falling onto the
foam head.
Move the glass away from
the spout to prevent drops
of beer from falling onto the
foam head.
Move the glass away
from the spout to
prevent drops of beer
from falling onto the
foam head.
b. Remove the foam that rises
beyond the rim of the glass
by passing a skimmer over the
rim of the glass at an angle
of 45°.
10 Your beer is now ready to be
served.
Your beer is now ready to
be served.
Your beer is now
ready to beserved.
Replacing the keg
The keg is empty when only foam comes out of the spout and no beer.
The display also indicates that the keg is empty.
	1		Press the release button to the right to open the doors.
Make sure you open the doors fully.
	2		Lift the blue locking levers completely.
English 15
Page: 15
	3		Tilt the keg with the assembled tap unit towards you and take it out
of the appliance.
	4		Press on the release buttons on both sides of the tap unit (1).The
tap unit is released from the keg with a click and you can remove it
(2).
You have to remove the tap unit from the keg before you can replace the
tube.
Always replace the tube when you install a new keg. Never use a tube for
more than 30 days.
	5		Hold the tap unit over a sink.
	6		Press the blue tube release button to release the tube.
	7		Pull the tube connector out of the tap unit and remove the flexible
tube out of the tap body.
Always clean the tap unit with hot water and, if necessary, some washing-
up liquid before you insert a new tube.
	8		Assemble the tap unit onto the keg (see chapter ‘Preparing for
use’, section ‘Placing the tap unit onto the keg’).
	9		Insert a new tube into the tap unit (see chapter ‘Preparing for use’,
section ‘Placing the tube into the tap unit’).
	10		Place the new keg into the appliance (see chapter ‘Preparing for use’,
section ‘Placing the keg into the appliance’).
English
16
Page: 16
Cleaning
Clean the appliance when you replace the keg or when you store the
appliance for a longer period.
Never use scouring pads, scouring agents or aggressive liquids such as
petrol or acetone to clean the appliance.
	1		Always unplug the appliance before you clean it.
	2		Clean the outside of the appliance with a damp cloth.
	3		Remove the spout.
	4		Remove and disassemble the drip tray and the drip tray cover.
	5		You can remove the tap handle by pulling it out of the tap body.
	6		Clean the tap unit, the drip tray and the drip tray cover with hot
water and, if necessary, some washing-up liquid.
Hot water may cause burns.Always check if the water is not too hot
before you clean these parts under the tap.
,
, Only the drip tray, the drip tray cover and the spout are dishwasher-
proof.
Environment
,
, Do not throw away the appliance with the normal household waste
at the end of its life, but hand it in at an official collection point for
recycling. By doing this, you help to preserve the environment.
Disposal of the cooling element
,
, The cooling element inside the appliance contains a substance
that may pollute the environment.Therefore you must remove
the cooling element before you discard the appliance.
You can also take or send the appliance to a Philips service centre.The staff
of this centre will remove the cooling element for you and will dispose of it
in an environmentally safe way.
Only remove the cooling element when you discard the appliance!
English 17
Page: 17
Be careful of the paste on the cooling element and adjacent parts. If this
paste ends up on your clothes, it causes a permanent stain.
Remove the cooling element in the following way:
	1		Unplug the appliance.
	2		Slide the release button to the right to open the doors.
,
, There are two holes near the hinges of the doors on either side.
	3		Remove the four screws located in these holes with a screwdriver.
	4		Remove the back cover from the appliance.
	5		Pull the cooling fan out of the appliance.
,
, Now you see an aluminium plate with fins on it and with two screw
holes.
	6		Undo the screws with a screwdriver.
	7		Remove the aluminium plate.
,
, After you have removed the aluminium plate, you see a white plate
of approx. 4 x 4cm.This is the actual cooling element.
	8		Place the flat blade of a screwdriver behind the cooling element.
Twist the screwdriver to pry the cooling element off the back of the
aluminium plate.
	9		Cut the wires attached to the cooling element.
Do not connect the appliance to the mains again after you have removed
the cooling element.
Never reassemble the cooling element once you have removed it.
English
18
Page: 18
	10		Hand in the cooling element at an official collection point for
chemical waste.
Guarantee & service
If you need information or if you have a problem, contact us online at
www.philips.com or call the PerfectDraft call centre.Their phone number
is 078-250159 (Belgium), 01801-324000 (Germany) or 0900-2224222
(Netherlands).
When you take the appliance to your dealer or a Philips service centre for
determination of the cause of the problem, also bring the tube and the keg.
Guarantee restrictions
Your guarantee becomes invalid if:
-
- you do not use the appliance according to the instructions in this user
manual.
-
- you use damaged kegs in this appliance.
-
- you do not install the kegs according to the instructions in this user
manual.
-
- you use kegs from other suppliers than the ones mentioned in this user
manual.
,
, The kegs and tubes are not covered by this guarantee.
Troubleshooting
If you are unable to solve the problem with the information below,
contact us online at www.philips.com or call the PerfectDraft call centre
at 078-250159 (Belgium), 01801-324000 (Germany) or 0900-2224222
(Netherlands).
Problem Solution
Appliance general
It is not possible to close
the doors.
Make sure you push down the blue locking levers until they are in
horizontal position before you close the doors.
Make sure the tube is placed correctly in the tap unit and the tap handle is
in upright position. See chapter ‘Preparing for use’, section ‘Placing the tube
into the tap unit’.
Make sure the tap unit is placed correctly on the keg.
There is frost on the keg or
on the appliance.
Unplug the appliance and let the keg or appliance defrost. Dry
the appliance or keg with a cloth.
Make sure that the doors are properly closed. For instructions on how to
close the doors, see the chapter ‘Preparing for use’, section ‘Placing the keg
into the appliance’. It is normal for some frost to be present on the back
of the keg.
Beer leaks out of the
appliance.
Make sure that the tap unit and the tube are placed correctly (see chapter
‘Preparing for use’, sections ‘Placing the tap unit onto the keg’ and ‘Placing
the tube into the tap unit’).
English 19
Page: 19
Problem Solution
Remove the tap unit and tube and reinstall them. If the problem continues
to occur, contact the PerfectDraft call centre in your country to obtain a
new tube.
The appliance makes a
sound.
Because the appliance chills constantly, the fan works continuously.
The pump may go on while you pour beer to maintain the right pressure.
When you are not pouring beer, the pump also goes on every now and
then to keep the appliance at the right pressure.
The pump goes on
frequently when I am not
pouring beer.
Reinstall the tap unit and tube. If this does not help, try another keg
together with a new tube. If the problem continues to occur, contact the
PerfectDraft call centre in your country.
Tap unit
It is difficult to place the
tap unit onto the keg.
Make sure no old beer is left in the tap unit. Clean the entire tap unit with
hot water and, if necessary, some washing-up liquid.
It is difficult to press the
release buttons to remove
the tap unit.
First remove the keg from of the appliance.Then press the release buttons
to remove the tap unit from the keg.
Beer residues may cause the tap unit to stick to the keg. Clean the tap unit
with hot water and, if necessary, some washing-up liquid to dissolve beer
residues.Then remove the tap unit from the keg.
It is not possible to place
the keg with the assembled
tap unit in the appliance.
Make sure the tap unit is placed correctly on the keg. Push the tap unit
down firmly when you place it onto the keg. See chapter ‘Preparing for
use’, section ‘Placing the tap unit onto the keg’.
Check if you have lifted the blue locking levers properly and push them
down after you have installed the keg.
The tube cannot be
removed from the tap unit.
Remove the tap unit first before you remove the tube. Rinse the tap unit
with hot water. Press the tube release button and pull the tube out of the
spout.
It is difficult to place the
tube into the tap unit.
Make sure the tube is placed correctly (see chapter ‘Preparing for use’,
section ‘Placing the tube into the tap unit’).
Make sure you clean the tap unit with hot water before you insert a new
tube.
The tube may be broken. Contact the PerfectDraft call centre in your
country to obtain a new tube.
LCD display
There is a green dash
on the display and the
appliance does not work.
Make sure that the tap unit is placed correctly (see chapter ‘Preparing for
use’, section ‘Placing the tap unit onto the keg’).
There is a green or red
dash on the display and the
background light flashes.
Remove the tap unit, clean it and reinstall the tap unit. If this does not help
try another keg with a new tube.
English
20
Page: 20
Problem Solution
If the problem continues to occur, please contact the PerfectDraft call
centre in your country.
The display shows the
wrong volume.
For proper functioning of the volume indication, it is crucial that you open
the tap handle completely (see chapter ‘How to pour a perfect beer’).
In case of a power failure or if the appliance has been disconnected from
the mains, the level indication will be accurate again after you have poured
a few glasses of beer.
Pouring beer
No beer comes out when I
pull the tap handle.
Perhaps the keg is empty. Put a new keg into the appliance.
Make sure the tube is fitted correctly in the tap unit (see chapter
‘Preparing for use’, section ‘Placing the tube into the tap unit’).
Make sure that the tap unit is placed correctly on the keg (see chapter
‘Preparing for use’, section ‘Placing the tap unit onto the keg’).
Too much foam comes out
of the appliance.
Make sure you open the tap completely when you pour beer (see chapter
‘How to pour a perfect beer’).
The beer is too warm.Wait until the beer is cold enough to be poured, i.e.
when temperature on the display is green.
The keg has been shaken too much.Wait half an hour for the beer to
settle.
The first glass can contain more foam than usual.Try pouring a second
glass.
The tube may not function properly. Contact the PerfectDraft call centre
in your country to obtain a new tube.
The foam head is too high. See chapter ‘How to pour a perfect beer’.
The beer that comes out
of the appliance is flat.
Check if the keg has been open for over 30 days and check if the expiry
date of the keg has passed.
Perhaps the glasses you used were not clean enough. Rinse the glasses
with water and some washing-up liquid. Rinse them thoroughly with cold
water to remove all grease and soap residues
Pour beer as described on the keg and in this user manual (see chapter
‘How to pour a perfect beer’).
The foam head collapses
very quickly.
Perhaps the glasses you used were not clean enough. Rinse the glasses
with water and some washing-up liquid. Rinse them thoroughly with cold
water to remove all grease and soap residues.
Make sure the beer is cold enough to be poured, i.e. when temperature
on the display is green.
The keg fell, can I still use it? When it is an unopened keg and it does not have any visual damage, you
can try to use it.When the keg is already open, you cannot use the keg
anymore and have to install a new keg.
English 21
Page: 21
Problem Solution
The beer tastes bad. Make sure you keep the appliance plugged in all the time. Once the keg
has been opened and is kept cool, the beer stays fresh for 30 days. Check
the expiry date on the keg before you install a new keg.
Always clean the tap unit and place a new tube into it when you install a
new keg.
Make sure you use clean glasses.
Cooling
The temperature on the
display goes up.
Make sure that the doors are properly closed (see chapter ‘Preparing for
use’, section ‘Placing the keg into the appliance’).
During hot days, put the appliance in a cooler place.
Place the appliance in an environment with an ambient temperature
between 3°C and 32°C. Leave at least 10cm free space around the
appliance. Do not expose the appliance to direct sunlight.
Check if the fan outlet at the back of the appliance is free from dust
and/or other particles.
The appliance does not
chill the beer sufficiently
At an ambient temperature of 23°C, chilling the keg takes approximately
12-15 hours.
At higher ambient temperatures, chilling the keg takes longer.When
you use the appliance above 32°C, the beer temperature may rise
above 3°C.When the temperature decreases to below 32°C, the beer
temperature drops to 3°C again.
You can prechill the keg in upright position in the fridge for a while before
you install the keg.
Keg suppliers
If you need information about the keg or if you have a problem with your
keg, you can contact the supplier of the keg in your country.You will find
the phone numbers in the table below.
Country Brand Phone number Web address
The Netherlands Dommelsch 0800-0230367 www.dommelsch.nl
Hertog Jan 0800-0230375 www.hertogjan.nl
Jupiler 0800-0230945 www.jupiler.nl
Grolsch 0800-1591 www.grolsch.nl
Bavaria 0900-2282742 (Eur 0,10 p/m) www.bavaria.nl
Belgium Stella Artois 070-222918 www.stella-artois.be
Jupiler 070-222912 www.jupiler.be
Leffe 078 250 159 www.perfectdraft.
com
English
22
Page: 22
Country Brand Phone number Web address
Luxembourgh Diekirch 0035-2802131999 -
Jupiler 0032 70-222912 www.jupiler.be
Leffe 0032 78 250 159 www.perfectdraft.
com
Germany Beck’s Pils 0180/1324000 (Eur 0,12 p/m) www.perfectdraft.
com
Beck’s Gold 0180/1324000 (Eur 0,12 p/m) www.perfectdraft.
com
Diebels Alt 0180/1324000 (Eur 0,12 p/m) www.perfectdraft.
com
Diebels Pils 0180/1324000 (Eur 0,12 p/m) www.perfectdraft.
com
Hasseröder 0180/1324000 (Eur 0,12 p/m) www.perfectdraft.
com
Dinkelacker 0180/1324000 (Eur 0,12 p/m) www.perfectdraft.
com
English 23
Page: 61
Pays Marque Téléphone Site Internet
Diebels Alt 0180/1324000 (0,12 €/m) www.perfectdraft.
com
Diebels Pils 0180/1324000 (0,12 €/m) www.perfectdraft.
com
Hasseröder 0180/1324000 (0,12 €/m) www.perfectdraft.
com
Dinkelacker 0180/1324000 (0,12 €/m) www.perfectdraft.
com
Français
62
Page: 100
Paese Marca Numero di telefono Indirizzo Web
Bavaria 0900-2282742 (€ 0,10/min) www.bavaria.nl
Belgio Stella Artois 070-222918 www.stella-artois.be
Jupiler 070-222912 www.jupiler.be
Leffe 078 250 159 www.perfectdraft.com
Lussemburgo Diekirch 0035-2802131999 -
Jupiler 0032 70-222912 www.jupiler.be
Leffe 0032 78 250 159 www.perfectdraft.com
Germania Beck’s Pils 0180/1324000 (€ 0,12/min) www.perfectdraft.com
Beck’s Gold 0180/1324000 (€ 0,12/min) www.perfectdraft.com
Diebels Alt 0180/1324000 (€ 0,12/min) www.perfectdraft.com
Diebels Pils 0180/1324000 (€ 0,12/min) www.perfectdraft.com
Hasseröder 0180/1324000 (€ 0,12/min) www.perfectdraft.com
Italiano 101

Question & answers

There are no questions about the Philips PerfectDraft HD3620 yet.

Ask a question about the Philips PerfectDraft HD3620

Have a question about the Philips PerfectDraft HD3620 but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Philips PerfectDraft HD3620. Please make sure that you describe your difficulty with the Philips PerfectDraft HD3620 as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.