View a manual of the Philips Fidelio AD7000W below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.
Register your product and get support at www.philips.com/welcome AD7000W/12 EN User manual
3 E n g l i s h EN Contents 1 Important 4 Safety 4 Notice 5 2 Your Entertainment System 7 Introduction 7 What’s in the box 7 What else you need 7 Overview of the main unit 8 Get started to use AirPlay 8 3 Prepare 9 Connect power 9 Turn AD7000W on 9 4 Connect to your home Wi-Fi network for AirPlay 10 Scenario 1: Connect to a WPS router 10 Scenario 2: Connect to a non-WPS router 11 5 Play 17 Stream audio from your iTunes music library to AD7000W 17 Control play 18 Use advanced sound settings 18 Play/charge your iPod/iPhone/iPad through USB socket 19 Play from an external device 19
20 7 Product information 22
22 8 Troubleshooting 23
4 h Do not remove the casing of this product. i Do not expose the product to dripping / splashing water, rain or high humidity. j Keep this product away from direct
k Do not install near any heat sources such as radiators, heat registers, stoves, or other electrical equipment (including
l Do not place any other electrical equipment on the product. m Do not place any sources of danger on the product (e.g. objects containing n This product may include batteries. Please refer to safety and disposal instructions for batteries in this user manual. o Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. Warning Never remove the casing of this apparatus. Never lubricate any part of this apparatus. Never place this apparatus on other electrical equipment. Keep this apparatus away from direct sunlight, naked
Ensure that you always have easy access to the power cord, plug or adaptor to disconnect this apparatus from the power. Risk of overheating! Never install this apparatus
at least four inches around this apparatus for ventilation. Ensure curtains or other objects never cover the ventilation slots on this apparatus. 1 Important Safety Information for Europe: Know these safety symbols The ‘exclamation mark’ calls attention to features for which you should carefully read the supplied literature to prevent operating and maintenance problems. The ‘lightening bolt’ symbol indicates uninsulated components within the product that can cause an electric shock.
"# not expose the product to rain or moisture and
& # as vases, on the product. a Read these instructions. b Keep these instructions. c Heed all warnings. d Follow all instructions. e Do not use this product near water. f Clean only with dry cloth. g Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. EN
manufacturer may void user’s authority to operate this product. Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/ EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health. Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed with normal household waste.Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environmental and human health. Mains fuse This information applies only to products with a UK mains plug.
plug. If you replace the fuse, use one with: the ratings shown on the plug, a BS 1362 approval, and the ASTA approval mark. Contact your dealer if you are not sure about what type of fuse to use. Caution:To conform with the EMC directive (2004/108/EC), do not detach the plug from the power cord. Notice This product complies with the radio interference requirements of the European Community. The device can be operated in the EU without restrictions indoor, but cannot be operated outdoors in France in the whole of the band until further notice. This product complies with the requirement of the 1999/5/EC directive. EN
6 AirPlay, iPod, and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries. iPad is a trademark of Apple Inc. Class II equipment symbol: CLASS II apparatus with double insulation, and no protective earth provided. Note The type plate is located on the bottom of the apparatus. Information about the use of batteries: Caution +"
Do not mix new and used batteries. Do not mix different brands of batteries. Observe correct polarity. Remove batteries from products that are not in use for a longer period of time. Store batteries in a dry place. Risk of injury:Wear gloves when handling leaking batteries. Keep batteries out of reach of children and pets. Risk of explosion: Do not short circuit batteries. Do not expose batteries to excessive heat. Do not throw $
batteries. Do not recharge non-rechargeable batteries. Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.) Your system consists of materials which can be recycled and reused if disassembled by
local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment. “Made for iPod,”“Made for iPhone,” and “Made for iPad” mean that an electronic accessory $
iPod, iPhone, or iPad, respectively, and has $
Apple performance standards.Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may affect wireless performance. EN
7 E n g l i s h Tip Please visit www.philips.com/welcome for information about more Philips AirPlay-enabled devices. With AD7000W, you can also: charge your iPod/iPhone/iPad through the USB socket with an Apple USB cable (not supplied). play your iTunes music library on your iPod/iPhone/iPad through the USB socket directly while charging. play music from other audio devices through the MP3-LINK socket. What’s in the box Check and identify the contents of your package: Main unit (with a built-in Wi-Fi module) 1 x AC power adapter 1 x MP3 link cable User manual (in CD-ROM) Quick start guide What else you need To stream audio wirelessly by AirPlay, you need: >?@
A host for your iTunes music library, for example, an iPod touch/iPhone/ iPad installed with iOS 4.3 (or later) or a Wi-Fi enabled PC/Mac installed with iTunes 10 (or later) Your AD7000W should be connected to the same local network as your iTunes host device through the Wi-Fi router. 2 Your Entertainment System Congratulations on your purchase, and
support that Philips offers, register your product at www.philips.com/welcome. If you contact Philips, you will be asked for the model and serial number of this apparatus.The model number and serial number are on the bottom of the apparatus.Write the numbers here: Model No. __________________________ Serial No. ___________________________ Introduction Apple AirPlay technology enables you to play your iTunes music library, hosted on a Mac, PC, iPhone, iPod touch, or iPad on any AirPlay- enabled device (for example, your AD7000W) connected to the Wi-Fi network. With an AirPlay-enabled device (for example, your AD7000W), you can: stream audio from your iTunes music library to any room in your house choose which AirPlay-enabled devices you want to play music on (if you have more than one such devices in your house) stream audio to multiple AirPlay- enabled devices at the same time (from the iTunes music library on your PC/Mac only) EN
8 e MP3-LINK Connect an external audio player through the supplied MP3 link cable. f DC IN Connect the power adaptor. g USB Connect an iPod/iPhone/iPad through an Apple USB cable (not supplied). Get started to use AirPlay To get started with AirPlay, you need to: 1 Upgrade your iPod touch/iPhone/iPad to the latest iOS version (iOS 4.3 or later). Or install the latest version of iTunes (iTunes 10 or later) on your PC/Mac. 2 Connect power to AD7000W, then turn it on (see ‘Prepare’ on page 9). 3 Connect AD7000W to your existing home Wi-Fi network (see ‘Connect to your home Wi-Fi network for AirPlay’ on page 10). 4 Make sure that your iPod touch/iPhone/ iPad or PC/Mac are also connected to the same Wi-Fi network. List of compatible iTunes host devices for AirPlay In terms of AirPlay,AD7000W is compatible with: a Wi-Fi enabled PC/Mac installed with iTunes 10 (or later); and the following iPod/iPhone/iPad models installed with iOS 4.3 (or later): iPad 2 iPad iPhone 4 iPhone 3GS iPod touch (2nd, 3rd, and 4th generation) Overview of the main unit a Power indicator b +/- Adjust volume. c Turn the unit on/off. (Press and hold) reset the unit. d WI-FI SETUP button/indicator Connect the unit to a Wi-Fi network. Show the Wi-Fi connection status of the unit. f a g e d b c EN
9 E n g l i s h Turn AD7000W on 1 Press on the back to turn the unit on. 2 Wait for successful boot-up of the unit. » The boot-up takes about 35 seconds. » During boot-up, the Wi-Fi SETUP indicator on the back of the unit blinks green quickly. » After boot-up, if no Wi-Fi connection has been set up for AD7000W, the Wi-Fi SETUP indicator starts to blink green slowly. To switch the unit to Eco standby mode, press again. To switch the unit on from Eco standby mode, press again. 3 Prepare Always follow the instructions in this chapter in sequence. Connect power Caution Risk of product damage! Make sure that the power supply voltage matches the voltage printed on the bottom of the unit. Risk of electric shock! When you unplug the AC adaptor, always pull the plug from the socket. Never pull the cord. Before you connect the AC adaptor, make sure that you have completed all the other connections. Connect the AC power cord to the DC IN socket on the back of the unit. the wall power socket. EN
10 Before connection of AD7000W to you home Wi-Fi network, check the points below. 1 Make sure that your Wi-Fi router is powered on and working properly. 2 Make sure that AD7000W has been powered on and booted up successfully (see ‘Turn AD7000W on’ on page 9). 3 Identify the type of your Wi-Fi router (see the user manual of your Wi-Fi router for details). Scenario 1: Connect to a WPS router Note Before you press any button on AD7000W, make sure that AD7000W has been booted up successfully (see ‘Turn AD7000W on’ on page 9). 1 Press the WPS button on your home Wi-Fi router. 2 Shortly after step 1, press Wi-Fi SETUP on the back of AD7000W. » The Wi-Fi SETUP indicator blinks red, yellow and green alternately. » Within 2 minutes, the WI-FI SETUP indicator stops blinking and stays green, and the unit beeps. WPS 4 Connect to your home Wi- Fi network for AirPlay To connect AD7000W to your existing home Wi-Fi network, you need to apply your home Wi-Fi settings to AD7000W. You can do this in two ways (depending on which type of Wi-Fi router you use): Automatically - if your Wi-Fi router is WPS (Wi-Fi Protected Setup)- enabled and supports PBC (Push Button Connection) (see ‘Scenario 1: Connect to a WPS router’ on page 10) Manually - if your Wi-Fi router does not support WPS (see ‘Scenario 2: Connect to a non-WPS router’ on page 11) Once connected successfully,AD7000W will remember your home Wi-Fi settings.Then you can enjoy AirPlay whenever AD7000W is powered on and connected to your home Wi- Fi network automatically. EN
11 E n g l i s h The Wi-Fi enabled device can be an iPod touch/ iPhone/iPad or a Wi-Fi enabled PC/Mac. Follow the sequence below for connection of AD7000W to a non-WPS Wi-Fi router. 1 Collect settings of your home Wi-Fi router and write down on paper for use during AD7000W Wi-Fi setup (see ‘Collect settings of your home Wi-Fi router’ on page 11). 2 Switch AD7000W to Assisted Wi-Fi Setup mode (see ‘Switch AD7000W to Assisted Wi-Fi Setup mode’ on page 12). » A new Wi-Fi network created by AD7000W will appear, with the network name (SSID) of Philips Fidelio AirPlay. 3 Connect your Wi-Fi enabled device to the newly created Wi-Fi network temporarily (see ‘Connect your Wi-Fi enabled device to the newly created Wi-Fi network’ on page 12). 4 Open the built-in web page of AD7000W with the Internet Browser of your Wi-Fi enabled device (see ‘Open the built-in web page of AD7000W’ on page 14). 5 Change the internal Wi-Fi settings of AD7000W based on the settings you wrote on paper at step 1 (see ‘Change the internal Wi-Fi settings of AD7000W’ on page 15). 6 Restore your Wi-Fi enabled device back to your existing home Wi-Fi settings (see ‘Restore your Wi-Fi enabled device back to your existing home Wi-Fi setting’ on page 16). Collect settings of your home Wi-Fi router Note Always consult the user manual of your home Wi-Fi router for detailed instructions. » AD7000W is connected to your home Wi-Fi network successfully. Tip For some Wi-Fi routers, you may need to hold the WPS button for Wi-Fi connection or enable the WPS =VX
If the Wi-Fi SETUP indicator on AD7000W blinks yellow, it means that the Wi-Fi connection has failed. Please wait for 2 minutes and try again. If the problem remains, try to set up the Wi-Fi connection manually (see ‘Scenario 2: Connect to a non-WPS router’ on page 11). If the Wi-Fi connection fails again, press and hold on the back of AD7000W to reset it, and then try again. Scenario 2: Connect to a non-WPS router Note You can also follow the procedures below to connect AD7000W to a WPS router manually. To connect AD7000W to a Wi-Fi router manually, you need access to AD7000W’s $ ?
its internal Wi-Fi settings.To do so, you need a Wi-Fi enabled device with an Internet browser for temporary Wi-Fi connection to AD7000W. EN
12 Press and hold Wi-Fi SETUP on the back of AD7000W for more than 5 seconds. » The Wi-Fi SETUP indicator blinks green and yellow alternately. » A new Wi-Fi network created by AD7000W will appear, with the network name (SSID) of Philips Fidelio AirPlay. » It may take up to 45 seconds for successful creation of this new Wi-Fi network. Note
Z[[[># the new Wi-Fi network created by AD7000W will disappear. If you fail to enter Assisted Wi-Fi Setup mode, power off AD7000W and power on it, then try again after successful boot-up. Make sure that there are no other Philips AirPlay- enabled devices in Assisted Wi-Fi Setup mode at the same time. Multiple Wi-Fi networks created this way may interfere with each other. Connect your Wi-Fi enabled device to the newly created Wi-Fi network The new Wi-Fi network created by AD7000W only allows access of one Wi-Fi enabled device. To avoid interference from any other Wi-Fi devices, you are recommended to temporarily disable the Wi-Fi function on your other Wi-Fi devices. Option 1: Use your iPod touch/iPhone/iPad 1 Select Settings -> Wi-Fi on your iPod touch/iPhone/iPad. 1 Connect your Wi-Fi enabled device to your existing home Wi-Fi network. 2 Launch the Internet browser (for example, Apple Safari or Microsoft Internet Explorer) on your Wi-Fi enabled device. 3 <
home Wi-Fi router. 4 Find the Wi-Fi settings tab and write down the following information on paper: A Network name (SSID) B Wi-Fi security mode (usually WEP, WPA or WPA2 if enabled) C Wi-Fi password (if Wi-Fi security is enabled) D DHCP mode (enabled or disabled) E Static IP address settings (if DHCP mode is disabled) Switch AD7000W to Assisted Wi-Fi Setup mode Note Before you press any button on AD7000W, make sure that AD7000W has been booted up successfully (see ‘Turn AD7000W on’ on page 9). EN
13 E n g l i s h 3 Wait until successful Wi-Fi connection on your iPod touch/iPhone/iPad. » is displayed at the upper left corner of your iPod touch/iPhone/iPad. Tip If Philips Fidelio AirPlay is not in the list, try to scan the available Wi-Fi networks again. Use your Wi-Fi enabled PC/Mac Note See the user manual of your PC/Mac for how to connect your PC/Mac to a Wi-Fi network. During Wi-Fi network connection, do not connect any network cable to your PC/Mac. 1 Open the Wi-Fi setup tool or control panel on your PC/Mac. 2 Scan the available Wi-Fi networks. 3 Select Philips Fidelio AirPlay from the list of available networks. 2 Select Philips Fidelio AirPlay from the list of available networks. Philips Fidelio AirPlay EN
14 If you use Safari on your Wi-Fi enabled PC/ Mac, you can also select ‘Philips_Fidelio XXX’ from the Bonjour pull-down list to enter the !"###$ % 1 Click -> Preferences. » The Bookmarks menu is displayed. 192.168.1.1 4 Wait until successful Wi-Fi connection on your PC/Mac. Tip If Philips Fidelio AirPlay is not in the list, try to scan the available Wi-Fi networks again. Open the built-in web page of AD7000W 1 Launch Apple Safari browser or any other Internet browser on your Wi-Fi enabled device. 2 Type in 192.168.1.1 at the browser
Z[[[> web page is displayed. EN
15 E n g l i s h Follow the on-screen instructions to
>?@ settings of AD7000W. » After a while, the indicator on the back of AD7000W stops blinking and stays green, and the unit beeps. » AD7000W is connected to your existing home Wi-Fi network successfully. Note If the WI-FI SETUP indicator on AD7000W does not stay green steadily, it means that the Wi-Fi connection has failed. Please power off both your Wi-Fi router and AD7000W and then power on them again to see whether AD7000W can be connected to your home Wi-Fi network. If the problem remains, try the above procedures again.
? power-on of AD7000W, the new Wi-Fi network created by AD7000W will disappear. Tip If you like, you can change the name of your AD7000W in Advanced settings -> AirPlay Device Name on the Z[[[>
you have multiple Philips AirPlay-enabled devices in your house and you need to distinguish between them. If you want to enter the network name (SSID) manually (for example, if you want to hide your SSID), go to Advanced settings -> CONFIGURE MANUALLY on
2 Tick Include Bonjour for Bookmarks bar. 3 Select ‘Philips_Fidelio XXX’ from the Bonjour pull-down list shown at the bookmarks bar. »
$ page is displayed. Change the internal Wi-Fi settings of AD7000W <
# you can change the internal Wi-Fi settings of AD7000W for connection of AD7000W to your existing home Wi-Fi network. Note '"
$ page match your home Wi-Fi network settings that you wrote on paper. EN
16 2 Select your network name (SSID) from the list of available wireless networks. 3 Enter the network key if required. 4 Wait until successful Wi-Fi connection to your home Wi-Fi network. Restore your Wi-Fi enabled device back to your existing home Wi-Fi setting Note Make sure that the settings at steps 2 to 3 below match your home Wi-Fi network settings you wrote on paper. 1 Select Settings -> Wi-Fi on your iPod touch/iPhone/iPad. Or open the list of available Wi-Fi networks on your PC/Mac. EN
17 E n g l i s h 3 Select Philips_Fidelio XXXX (or user (
» After a while, you will hear music from AD7000W. Note If you fail to hear music after successful setup, do one of the following on your iPod touch/iPhone/iPad: (1) Disconnect and then re-connect to the same Wi-Fi router again; (2) Close all applications running at the background; (3) Power off and then power on your iPod touch/ iPhone/iPad again. 5 Play Stream audio from your iTunes music library to AD7000W Note Make sure that your iTunes host device is connected to the same Wi-Fi network as AD7000W.Your iTunes device can be an iPod touch/iPhone/iPad installed with iOS 4.3 (or later) or a Wi-Fi enabled PC/Mac installed with iTunes 10 (or later). Stream from your iPod touch/iPhone/ iPad 1 Launch the iPod application on your iPod touch/iPhone/iPad. 2 Tap on the AirPlay icon. EN
18 Tip When you stream audio from your iTunes music library on a PC/Mac, you can select more than one AirPlay- enabled devices (if available) at step 3 to stream music to all of them at the same time. If you are using an earlier version of iTunes, the AirPlay icon may be instead of . Control play You can select different play options from either your iTunes host device or AD7000W. Note Make sure that you have successfully streamed audio from your iTunes music library to AD7000W. To pause or resume play, press . To adjust volume, press +/- repeatedly. Tip If you are streaming music from a PC/Mac, to control music play from AD7000W, remember to tick Allow iTunes audio control from remote speakers in Edit -> Preferences -> Devices on iTunes. Use advanced sound settings If your iTunes host device is an iPod touch/ iPhone/iPad: For advanced sound settings and additional features, you can use your iPod touch/iPhone/ iPad to download the Philips Fidelio application from Apple App Store. It is a free application from Philips. If your iTunes host device is a Wi-Fi enabled PC/Mac: For advanced sound settings, you can use the
zView -> Show Equalizer). Tip See the iTunes help documentation for more details. Stream from your PC/Mac 1 Launch iTunes 10 (or a later version) on your PC/Mac. 2 Click the AirPlay icon on the window. 3 Select Philips_Fidelio_AirPlay XXXX (or
» After a while, you will hear music from AD7000W. EN
19 E n g l i s h iPhone 3GS iPhone 3G iPhone iPod classic iPod 5G iPod 4G iPod nano (2nd, 3rd, 4th, 5th, and 6th generation) iPod touch (1st, 2nd, 3rd, and 4th generation) Play from an external device You can also listen to an external audio player through the unit. If you have stopped both audio streaming by AirPlay and play through the USB socket, the unit switches to the MP3 link source automatically. Connect the supplied MP3 link cable to: the MP3-LINK socket on the back of the unit. the headphone jack on an external audio player. Play/charge your iPod/iPhone/ iPad through USB socket Note The USB socket is only compatible with iPod/iPhone/ iPad. You can play or charge your iPod/iPhone/iPad through the USB socket with an Apple USB cable (not supplied). If you have stopped audio streaming by AirPlay, after successful USB connection, the unit switches to the USB source automatically. Connect an Apple USB cable (not supplied) to: the USB socket on the back of AD7000W. the dock connector on your iPod/ iPhone/iPad. Compatible iPod/iPhone/iPad The USB socket supports play and charge of the following iPod, iPhone, and iPad models. iPad 2 iPad iPhone 4 EN
20 Update from the Warning Always connect your AD7000W to AC power for
Have a question about the Philips Fidelio AD7000W but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Philips Fidelio AD7000W. Please make sure that you describe your difficulty with the Philips Fidelio AD7000W as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.