55PUN6754

Philips 55PUN6754 manual

55PUN6754

User manual for the Philips 55PUN6754 in English. This PDF manual has 55 pages.

Table of contents

Page: 1
Register your product and get support at 6754 series www.philips.com/TVsupport User Manual 55PUN6754 65PUN6754
Page: 2
Contents 1 Get Support 3 1.1 Identify and Register Your TV 3 1.2 TV Help and User Manual 3 1.3 On-line Help and User Manual 3 1.4 Consumer Care / Repair 3 2 Software 4 2.1 Update Software 4 2.2 Software Version 4 3 Quick Guide 5 3.1 Remote Control 5 3.2 IR sensor 6 3.3 Joystick - Local Control 6 4 Setting Up 7 4.1 Read Safety 7 4.2 TV Placement 7 4.3 Turn on TV 7 5 Connections 9 5.1 Connectivity guide 9 5.2 Antenna 9 5.3 Video Device 9 5.4 Audio Device 9 5.5 Mobile Device 10 5.6 Other Device 11 6 Switch Source 12 6.1 Source List 12 6.2 Rename Device 12 7 Channels 13 7.1 About Channels and Switch Channels 13 7.2 Install Channel 13 7.3 Channel List 14 7.4 Favorite Channels 15 7.5 Closed Caption and Language 15 8 Recording 16 8.1 What you need 16 8.2 Record a program 16 8.3 Schedule a Recording 16 8.4 List of recordings 16 8.5 Watch a recording 16 9 Videos, Photos and Music 17 9.1 From a USB Connection 17 9.2 Photos 17 9.3 360 Photo 17 9.4 Videos 18 9.5 Music 18 10 Open TV Setting Menus 19 10.1 Home Menu Overview 19 10.2 Frequent settings and All settings 19 10.3 All Settings 19 11 Networks 28 11.1 Home Network 28 11.2 Connect to Network 28 11.3 Wireless and Network Settings 29 12 Smart TV 30 12.1 Setup Smart TV 30 12.2 Smart TV Start Page 30 12.3 App Gallery 30 13 Ambilight 31 13.1 Ambilight Style 31 13.2 Ambilight Brightness, Saturation 31 13.3 Ambilight+hue 31 13.4 Advanced Ambilight Settings 33 13.5 Lounge Light Mode 33 14 Netflix 34 15 Amazon Prime Video 35 16 YouTube 36 17 Environmental 37 17.1 Energy Label 37 17.2 End of Use 37 18 Specifications 38 18.1 Power 38 18.2 Reception 38 18.3 Display Resolution 38 18.4 Supported Input Resolution - Video 38 18.5 Supported Input Resolution - Computer 38 18.6 Sound 38 18.7 Multimedia 38 18.8 Connectivity 39 19 Troubleshooting 40 19.1 Tips 40 19.2 Switch On 40 19.3 Remote Control 40 19.4 Channels 40 19.5 Picture 41 19.6 Sound 41 19.7 HDMI - UHD 42 19.8 USB 42 19.9 Wi-Fi and Internet 42 19.10 Wrong Menu Language 42 20 Safety and Care 44 20.1 Safety 44 20.2 Screen Care 45 21 Terms of Use 46 22 Copyrights 47 22.1 HDMI 47 22.2 Dolby Audio 47 22.3 Dolby Vision and Dolby Atmos 47 22.4 DTS-HD (italics) 47 22.5 Wi-Fi Alliance 47 22.6 Other Trademarks 47 23 Open Source 48 23.1 Open Source Software 48 23.2 Open Source License 48 24 Disclaimer regarding services and/or software offered by third parties 52 Index 53 2
Page: 3
1 Get Support 1.1 Identify and Register Your TV Identify your TV - TV model number and serial number You might be asked to provide the TV product model number and serial number. Find these numbers on the packaging label or on the type label on the back or bottom of the TV. Register your TV Register your TV and enjoy a range of benefits including full support (including downloads), privileged access to information about new products, exclusive offers and discounts, the chance to win prizes and even participate in special surveys about new releases. Go to www.philips.com/TVsupport 1.2 TV Help and User Manual  (Home) > Settings > Help You can use the Help function to diagnose and get more information about your TV. • TV information - View the Model name, Serial number and Software version of your TV. • How to - You can see instructions on how to install channels, sort channels, update TV software, connect external devices and use Smart functions on your TV. • Check the TV - You can check whether the picture, sound and Ambilight* are working well while playing a short video clip. • Check the Network - Check the Network Connection. • Update software - Check available software updates. • User manual - Read the user manual for TV information. • Troubleshooting - Find a solution for frequently asked questions. • Factory settings - Reset all settings to factory settings. • Reinstall TV - Reinstall and redo the complete TV installation. • Contact info - Shows the telephone number or web address for your country or region. 1.3 On-line Help and User Manual To solve any Philips TV related problem, you can consult our online support. You can select your language and enter your product model number. Go to www.philips.com/TVsupport. On the support site you can find your country's telephone number to contact us as well as answers to frequently asked questions (FAQs). In some countries, you can chat with one of our collaborators and ask your question directly or send a question by email. You can download new TV software or the manual to read on your computer. For more TV troubleshooting and frequently asked questions (FAQs)... Go to http://philips-tvconsumercare.kxondemand.com/ portal/en/ModelSelect TV Help on your tablet, smartphone or computer To carry out extended sequences of instructions more easily, you can download the TV Help in PDF format to read on your smartphone, tablet or computer. Alternatively, you can print the relevant Help page from your computer. To download the Help (user manual) go to www.philips.com/TVsupport 1.4 Consumer Care / Repair For support and repair, call the Consumer Care hotline in your country. Our service engineers will take care of a repair, if necessary. Find the telephone number in the printed documentation that came with the TV. Or consult our website www.philips.com/TVsupport and select your country if needed. TV model number and serial number You might be asked to provide the TV product model number and serial number. Find these numbers on the packaging label or on the type label on the back or bottom of the TV.  Warning Do not attempt to repair the TV yourself. This may cause severe injury, irreparable damage to your TV or void your warranty. 3
Page: 4
2 Software 2.1 Update Software Search for Updates Update from Internet  (Home) > Settings > All settings > Update software > Search for updates > Internet (Recommended) Look for a software update yourself. • If the TV is connected to the Internet, you may receive a message to update the TV software. You need a high-speed (broadband) Internet connection. If you receive this message, we recommend you to carry out the update. • During the software update, there is no picture and the TV will switch off and on again. This might happen several times. The update can take a few minutes. • Wait until the TV picture comes back up. Do not press the power switch  on the TV or on the remote control during the software update. Update from USB  (Home) > Settings > All settings > Update software > Search for updates > USB • You need a computer with a high-speed Internet connection and a USB memory device to upload the software on the TV. • Use a USB memory device with 512MB free space. Make sure that write protection is switched off. 1 - Start the update on TV Select Update software > Search for updates > USB, then press OK. 2 - Identify the TV Insert the USB memory into one of the USB connections of the TV. Select Start and press OK. An identification file is written on the USB memory device. 3 - Download the TV software - Insert the USB memory into your computer. - On the USB memory device, locate the file update.html and double click it. - Click on Send ID. - If new software is available, download the .zip file. - After the download, unzip the file and copy the file autorun.upg onto the USB memory device. - Do not place this file in a folder. 4 - Update the TV software Insert the USB memory into the TV again. The update starts automatically. The TV switches itself off for 10 seconds and then back on again. Please wait. Do not . . . • use the remote control • remove the USB memory device from the TV • press  twice • press the power switch on the TV The TV switches itself off (for 10 seconds) and then back on again. Please wait. The TV software has been updated. You can use the TV again. To prevent an accidental update of the TV software, delete the autorun.upg file from the USB memory device. Local Updates  (Home) > Settings > All settings > Update software > Search for updates > USB > Local updates. For dealers and expert users. 2.2 Software Version  (Home) > Settings > All settings > Update software > Current software info To view the current TV software version. 4
Page: 5
3 Quick Guide 3.1 Remote Control Batteries and Cleaning Replace batteries If the TV does not react on a key press on the remote control, the batteries might be empty. To replace the batteries, open the battery compartment on the back of the remote control. 1 - Slide the battery door in the direction shown by the arrow. 2 - Replace the old batteries with 2 type AAA-R03-1.5V batteries. Make sure the + and - ends of the batteries line up correctly. 3 - Reposition the battery door and slide it back until it clicks. • Remove the batteries if you are not using the remote control for a long time. • Safely dispose of your old batteries according to the end of use directions. Cleaning Your remote control is treated with a scratch-resistant coating. To clean the remote control, use a soft damp cloth. Never use substances such as alcohol, chemicals or household cleaners on the remote control. Key Overview Top 1 -  Standby / On To switch the TV on or back to Standby. 2 - Ambilight To select one of the Ambilight styles or switch off Ambilight. 3 -  INFO To open or close program info. 4 -  SOURCES To open the Sources menu. 5 -  Search To open the Smart TV searches page. Middle 1 - OK key To confirm a selection or setting. To open the channel list while watching TV. 2 - Arrow / navigation keys To navigate up, down, left or right. 3 -  BACK To close a menu without changing a setting. 4 - Playback and Record • Play , to playback. • Pause , to pause playback • Stop , to stop playback • Rewind , to rewind • Fast forward , to go fast forward • Record , to start recording 5 -  OPTIONS To open or close the Options Menu. 6 -  Home To open the Home menu. 7 -     Color keys Direct selection of options. Blue key , opens Help. Bottom 5
Page: 6
1 -  To open the Netflix App directly. With the TV switched on or from standby. • If you have a Netflix membership subscription, you can enjoy Netflix on this TV. Your TV must be connected to the Internet. • To open Netflix, press  to open the Netflix App. You can open Netflix immediately from a TV in standby. www.netflix.com 2 -  Mute / Volume Press in middle to mute the sound or to restore it. Press  or  to adjust the volume. 3 - Number keys To select a channel directly. 4 - (Dot) To enter digital sub-channels. 5 -  EXIT /   Channe l Press in the middle to switch back to watching TV or to stop an interactive TV application. Press  or  to switch to the next or previous channel on the channel list. 6 -  SMART TV To open the Smart TV start page. 7 - YouTube To open the YouTube app directly. 8 - LIST/CC (Closed captions) Long press to open the channel list. Short press to switch Closed captions on, off or on during mute. 3.2 IR sensor The TV can receive commands from a remote control that uses infrared (IR) to send commands. If you use this kind of remote control, always point it at the infrared sensor on the front of the TV.  Warning Do not put any objects in front of IR sensor of the TV as it may block the IR signal. 3.3 Joystick - Local Control Keys on TV If you lost the remote control or its batteries are empty, you can still do some basic TV operations. To open the basic menu… 1 - With the TV switched on, press the joystick key at the bottom of the TV to bring up the basic menu. 2 - Press left or right to select  Volume,  Channel, or  Sources. Select  Demo to start a demo movie. 3 - Press up or down to adjust the volume or tune to the next or previous channel. Press up or down to go through the list of sources, including the tuner selection. The menu will disappear automatically. 6
Page: 7
4 Setting Up 4.1 Read Safety Read the safety instructions first before you use the TV. To read the instructions, in Help > User manual, press the color key  Keywords and look up Safety and Care. 4.2 TV Placement Tips on Placement • Position the TV where light does not shine directly on the screen. • Position the TV up to 6 inches away from the wall. • The ideal distance to watch Ultra HD TV is 2 to 5 times of its screen height. When seated, your eyes should be level with the center of the screen. Note: Keep the TV away from dust-producing sources, such as stoves. Remove dust regularly to prevent dust from getting into the TV. TV Stand You can find the instructions for mounting the TV stand in the Quick Start Guide that comes with the TV. You can also download it from www.philips.com/TVsupport. Use the model number of the TV to look for the Quick Start Guide to download. Wall Mounting Your TV is also prepared for a VESA-compliant wall mount bracket (sold separately). Use the following VESA code when purchasing the wall mount . . . • 55PUN67x4 VESA MIS-F 300x200, M6 (Minimum 10 mm, Maximum 16 mm) • 65PUN67x4 VESA MIS-F 400x200, M6 (Minimum 12 mm, Maximum 16 mm) Caution Wall mounting the TV requires special skills and should only be performed by qualified personnel. The TV wall mounting should meet safety standards according to the TVs weight. Also read the safety precautions before positioning the TV. TP Vision Europe B.V. bears no responsibility for improper mounting or any mounting that results in accident or injury. 4.3 Turn on TV Connect Power Cable • Insert the power cable into the POWER connector on the back of the TV. • Make sure the power cable is securely inserted in the connector. • Make sure that the power plug, in the wall socket, is accessible at all times. • When you unplug the power cable, always pull the plug, never pull the cable. Although this TV has a very low standby power consumption, unplug the power cable to save energy 7
Page: 8
if you do not use the TV for a long period of time. On or Standby Before you switch on the TV, make sure you plugged in the mains power in the POWER connector on the back of the TV. Switch On • Press the small joystick key at the bottom of the TV. Switch to standby To switch the TV to standby, press  on the remote control. You can also press the small joystick key at the bottom of the TV. In standby mode, the TV is still connected to the mains power but consumes very little energy. To switch off the TV completely, disconnect the power plug. When disconnecting the power plug, always pull the power plug, never the cord. Ensure that you have full access to the power plug, power cord and outlet socket at all times. 8
Page: 9
5 Connections 5.1 Connectivity guide Always connect a device to the TV with the highest quality connection available. Also, use good quality cables to ensure a good transfer of picture and sound. When you connect a device, the TV recognizes its type and gives each device a correct type name. You can change the type name if you wish. If a correct type name for a device is set, the TV automatically switches to the ideal TV settings when you switch to this device in the Sources menu. 5.2 Antenna Insert the antenna plug firmly into the Antenna socket at the back of the TV. You can connect your own antenna or connect to an antenna signal from an antenna distribution system. Use an F-type 75-ohm RF antenna connector. 5.3 Video Device HDMI An HDMI connection has the best picture and sound quality. For best signal quality transfer, use a high-speed HDMI cable. Do not use an HDMI cable longer than 16 feet (5 meters). You can connect devices supporting HDR to any of the HDMI connectors. Copy protection HDMI ports support HDCP (High-bandwidth Digital Content Protection). HDCP is a copy protection signal that prevents copying content from a DVD disc or Blu- ray Disc. Also referred to as DRM (Digital Rights Management). Composite AV IN - Composite Video is a standard quality connection. The Audio Left and Right signals for sound are next to the CVBS. 5.4 Audio Device HDMI ARC Only HDMI 1 on the TV has HDMI ARC (Audio Return Channel). If the device, typically a Home Theater System (HTS), also has the HDMI ARC connection, connect it to HDMI 1 connection on this TV. With the HDMI ARC connection, you do not need to connect the extra audio cable that sends the sound of the TV picture to the HTS. The HDMI ARC connection combines both signals. 9
Page: 10
Digital Audio Out - Optical Audio Out - Optical is a high quality sound connection. This optical connection can carry 5.1 audio channels. If your device, typically a Home Theater System (HTS), has no HDMI ARC connection, you can use this connection with the Audio In - Optical connection on the HTS. The Audio Out - Optical connection sends the sound from the TV to the HTS. Headphones You can connect a set of headphones to the  connection on the side of the TV. The connection is a mini-jack 3.5mm. You can adjust the volume of the headphones separately. 5.5 Mobile Device Wi-Fi Direct / Miracast About Wi-Fi Miracast You can view your photos or play your music and videos from a mobile device on your TV with Wi-Fi Miracast™. The mobile device and the TV should be within range, which usually means being in the same room. Check if your mobile device is ready for Miracast. Your TV is a Wi-Fi CERTIFIED Miracast™ device. With Miracast™, you can watch and share the screen of your smartphone, tablet or computer on your TV screen wirelessly. You can stream videos (audio and video), and share photos or anything else that's on the device screen. No need to connect the device to your home network. Both the TV and the device must be Wi-Fi CERTIFIED Miracast™ devices and have Miracast switched on. Miracast on this TV is subject to the HDCP protocol and cannot display copy-protected premium content sent by a device. The maximum video resolution supported is 720p for 2.4GHz Wi-Fi. For more information on Wi-Fi CERTIFIED Miracast™ go to www.wi-fi.org Wi-Fi®, the Wi-Fi CERTIFIED logo, the Wi-Fi logo are registered trademarks of the Wi-Fi Alliance. Wi-Fi CERTIFIED Miracast™, Miracast™ are trademarks of the Wi-Fi Alliance. Using Miracast Switch on Miracast Press  SOURCES > Miracast Share a Screen on TV 1 - Activate Miracast (Screen mirroring) on your mobile device. 2 - On your mobile device, select the TV. (This TV will be displayed as TV model name) 3 - Select the TV name on your mobile device, after connection, you can enjoy using Miracast. Stop Sharing You can stop sharing a screen from the TV or the mobile device. From the device With the application you use to start Miracast, you 10
Page: 11
can disconnect and stop watching the screen of the device on TV. The TV will switch back to the last selected program. From the TV To stop watching the screen of the device on TV, you can . . . • press  EXIT to watch a TV broadcast • press  (Home) to start another activity on TV • press  SOURCES to open the Sources menu and select a connected device. Reset Wi-Fi Miracast connections All previously connected devices are stored in the Wi- Fi Miracast list of connections. To clear all connected Miracast devices…  (Home) > Settings > All settings > Network > Reset Wi-Fi Miracast connection. Screen Delay The normal delay when sharing a screen with Miracast is about 1 second. The delay might be longer if you are using older devices with less processing power. Apps - Philips TV Remote App With the TV Remote App, you master your media around you. Send photos, music or videos to your big TV screen or watch any of your TV channels live on your tablet or phone. With the TV Remote App you can use your phone as a remote control*. Download the Philips TV Remote App from your favorite app store today. The Philips TV Remote App is available for iOS and Android and is free of charge. * When use your phone as a remote control, TV cannot be switched on or off via your phone. 5.6 Other Device USB Flash Drive You can view photos or play your music and videos from a connected USB flash drive. Insert a USB flash drive in one of the USB connections on the TV while the TV is switched on. The TV detects the flash drive and opens a list showing its content. If the contents list does not appear automatically, press  SOURCES and select USB. For more information on watching or playing content from a USB flash drive, in Help, press the color key  Keywords and look up Photos, Videos and Music. 11
Page: 12
6 Switch Source 6.1 Source List • To open the sources menu, press  SOURCES . • To switch to a connected device, select the device with the arrows  (Right) or  (Left) and press OK. • To view the technical information of the connected device you are watching, press  OPTIONS and select Device info. • To close the source menu without switching to a device, press  SOURCES again. 6.2 Rename Device • Only CVBS, HDMI sources can be renamed or replace device icon.  (Home) > Settings > All settings > General settings > Input sources > Source > Edit 1 - Select one of the device icons and press OK. The preset name then appears in the text field. 2 - Press  (up) to move to the text field, press OK, then enter a new name using the on-screen keyboard. - Press the  (red) key to use lowercase - Press the  (green) key to use uppercase - Press the  (yellow) key to enter numbers and symbols - Press the  (blue) key to delete a character 3 - Select Enter when you are done. 12
Page: 13
7 Channels 7.1 About Channels and Switch Channels To watch TV channels • Press . The TV tunes to the TV channel you last watched. • Press  (Home) > TV > Channels then press OK. • Press + or  - to switch channels. • If you know the channel number, type in the number with the number keys. Press OK after you entered the number to switch channels. • To switch back to the previously tuned channel, press  BACK . To switch to a channel from a channel list • While watching a TV channel, press OK to open the channel lists. • The channel list can have several pages with channels. To view the next or previous page, press + or  -. • To close the channel lists without switching channels, press  BACK or  EXIT . Channel icons After an Automatic channel update of the channel list, newly found channels are marked with a  (star). If you lock a channel, it will be marked with a  (lock). Radio channels If digital broadcasting is available, digital radio stations are installed during installation. Switch to a radio channel just like you switch to a TV channel. This TV can receive digital television standard time DVB. TV may not work properly with some operators of digital television , non-compliance with requirements of the standard in full. 7.2 Install Channel Antenna/Cable Installation Auto Program  (Home) > Settings > Install Channels > Antenna/Cable Installation > Auto program 1 - Select Start now and press OK. 2 - Select Start and press OK to update channels. This can take a few minutes. Weak Channel Installation  (Home) > Settings > Install Channels > Antenna/Cable Installation > Weak channel installation The digital frequency is shown for this channel. If the reception is poor, you can reposition your antenna. To check the signal quality of this frequency again, select Search and press OK. To enter a specific digital frequency yourself, use the remote control digit keys. Alternatively, select the frequency, position the arrows on a number with  and  and change the number with  and . To check the frequency, select Search and press OK. Antenna Connection  (Home) > Settings > Install Channels > Antenna/Cable Installation > Antenna Connection 1 - Select Antenna or Cable, and press OK. 2 - Select Start and press OK. This can take a few minutes. Channel Options Open Options While watching a channel, you can set some options. Depending on the type of channel you are watching or depending on the TV settings you made, some options are available. To open the options menu… 1 - While watching a channel, press  OPTIONS. 2 - Press  OPTIONS again to close. Program info Select Program info to view information about the program you are watching. Audio Language If none of the preferred audio languages are available, you can select another audio language if available. If no audio languages are available, you cannot select this option. To read more information, in Help, press the color key  Keywords and look up Audio Language. 13
Page: 14
Closed Caption To switch on Closed Caption, press  OPTIONS, then select Closed Caption. Switch Closed Caption On or Off with this option. Select On During Mute to show closed captions only when the sound is muted with . Caption Service Select the correct type of closed caption services. For more information, in Help, press  Keywords and look up Closed Caption. Channel info Select Channel info to view technical information about the channel. 7.3 Channel List Open Channel List To open the current channel list… 1 - Press , to switch to TV. 2 - Press OK to open the current channel list. 3 - Press  OPTIONS > Select channel list. 4 - Select one channel list you want to watch. 5 - Press  BACK to close the channel list. Channel List Options Open Option Menu To open the channel list option menu... • Press , to switch to TV. • Press OK to open the current channel list. • Press  OPTIONS , and select one of options. • Press  BACK to close the channel list. Select Channel Filter 1 - Press , to switch to TV. 2 - Press OK to open the current channel list. 3 - Press  OPTIONS > Digital 4 - Select one of channel combinations showing in the channel list. Create or Edit Favorites Channel List  > OK >  OPTIONS > Create favorites list Select a channel then press OK to add in a favorites channel list, once completed, press  Done.  > OK >  OPTIONS > Edit favorites Select a channel, then press OK to add to or remove from a channel favorites list. When you are done, press  Done. Select Channel Range  > OK >  OPTIONS > Select channel range Select a range of channels in a favorites channel list, once completed, press OK. Select Channel List  > OK >  OPTIONS > Select channel list Select a range of channels in a favorites channel list, once completed, press OK. Search Channels  > OK >  OPTIONS > Search channel You can search for a channel to find it in a long list of channels. 1 - Press , to switch to TV. 2 - Press OK to open the current channel list. 3 - Press  OPTIONS > Search channel, and press OK. 4 - In the typing field, press OK to open on-screen keyboard, or press  BACK to hide the on-screen keyboard. 5 - Use the navigation keys to select a character, then press OK. - Press the  (red) key to use lowercase - Press  (green) key to use uppercase - Press the  (yellow) key to enter numbers and symbols - Press the  (blue) key to delete a character - Select Enter to start searching 6 - Select  Done when the search is done. 7 - Press  BACK to close the channel list. Lock or Unlock Channel  > OK >  OPTIONS > Lock channel, Unlock channel To prevent children from watching a channel, you can lock a channel. To watch a locked channel, you must enter the 4-digit Child Lock PIN code first. You 14
Page: 15
cannot lock programs from connected devices. The locked channel will have  next to the channel logo. Remove Favorite List  > OK >  OPTIONS > Remove favorite list To remove existing favorite list, select Yes. 7.4 Favorite Channels About favorite Channels You can create a favorite channel list that only holds the channels you want to watch. With the Favorite channel list selected, you will only see your favorite channels when you switch through channels. Create a favorites List 1 - While watching a TV channel, press OK to open the channel list. 2 - Select the channel, and press  Mark as favorites to mark as favorite. 3 - The selected channel is marked with a . 4 - To finish, press  BACK . The channels are added to the Favorites list. Remove Channel from the Favorites List To remove a channel from the favorites list, select the channel with , then press  Unmark as favorites again to unmark as favorites. 7.5 Closed Caption and Language Closed Caption You can display closed captions at all times or only when the TV is muted. To open Closed Caption, press CC. Note: • Not all TV programs, commercials, and features include closed captioning information. See your local TV program listings for channels with closed captions. The captioned programs are typically listed with service marks, such as "CC," in the TV listings. Switch on closed caption 1 - While you watch TV, press  OPTIONS. 2 - Select Closed Caption > On and press OK. Select type of closed caption 1 - While you watch TV, press  OPTIONS. 2 - Select Caption Service. 3 - Select the correct type of closed captions and press OK. Audio Language If the TV channel broadcasts multiple or dual audio languages, you can select your preferred audio language. 1 - While you watch TV, press  OPTIONS. 2 - For digital channels, select Audio Language. For analog channels, select Alternate Audio. Press OK to confirm your selection. 3 - Select from the available languages, then press OK. Note: If you have selected Alternate Audio for analog channels, select between: • Main: Primary audio language or • SAP: Secondary audio language Menu Language To change the language of the TV menus and messages… 1 - Press  (Home), select Settings > All settings > General settings > Language > Menu language, then press OK. 2 - Select the language you want and press OK. 3 - Press  (left) repeatedly if necessary, to close the menu. 15
Page: 16
8 Recording 8.1 What you need To record a TV program, you need… • a connected USB Hard Drive formatted on this TV • digital TV channels installed on this TV 8.2 Record a program • To record the program you are watching right now, press  (Record) on the remote control. The recording will start immediately. • To stop recording, press  (Stop). 8.3 Schedule a Recording  (Home) > Watch TV > Recordings • You can schedule a recording of an upcoming program. • Press  Schedule. 1 - Press the color key  Schedule. 2 - Select the channel to record from and press OK. 3 - Select the day of the recording and press OK. 4 - Set the start and end time of the recording. Select a button and use the  (up) or  (down) keys to set the hours and minutes. 5 - Select Confirm and press OK to schedule the manual recording. The recording will appear in the list of scheduled recordings and reminders. 8.4 List of recordings  (Home) > Watch TV > Recordings You can view and manage your recordings in the list of recordings. 8.5 Watch a recording  (Home) > Watch TV > Recordings • In the list of recordings, select the recording you want and press OK to start watching. • You can use the keys  (pause),  (play),  (rewind),  (fast forward) or  (stop). • To switch back to watch TV, press  EXIT. 16
Page: 17
9 Videos, Photos and Music 9.1 From a USB Connection You can view your photos or play your music and videos from a connected USB flash drive or USB Hard Drive. With the TV switched on, plug in a USB flash drive or a USB Hard Drive to one of the USB connections. Press  SOURCES, then select  USB, you can browse your files in folder structure you have organized on the USB Hard Drive. Warning If you try to pause or record a program with a USB Hard Drive connected, the TV will ask you to format the USB Hard Drive. This formatting will delete all current files on the USB Hard Drive. 9.2 Photos View Photos 1 - Press  SOURCES, select  USB and press OK. 2 - Select  USB Flash Drive and press  (right) to select the USB device you need. 3 - Select Photo, you can press  Sort to browse your photos by date, month, year or alphabetically by name. 4 - Select one of photos, and press OK to view the selected photo. • To view photos, select Photos in the menu bar, select a photo thumbnail and press OK. • If there are several photos in the same folder, select a photo and press  Slide show to start a slide show of all photos in this folder. • Watch a photo and press  INFO to show below: Progress bar, Playback control bar,  (Jump to the previous photo in a folder),  (Jump to the next photo in a folder),  (Start slideshow playback),  (Pause the playback),  (Start slideshow),  (Rotate photo) Photo Options With a photo on screen, press  OPTIONS to… List/Thumbnails View photos with list view or thumbnails view. Shuffle off, Shuffle on View the pictures in sequential order, or at random. Repeat, Play once View the pictures repeatedly or once only. Stop music Stop music playback. Slideshow speed Set the speed of the slideshow. Slideshow transitions Set the transition from one picture to the next. 9.3 360 Photo View 360 Photos 1 - Press  SOURCES, select  USB and press OK. 2 - Select  USB Flash Drive and press  (right) to select the USB device you need. 3 - Select 360 Photos, and you can press  Sort to browse your 360 photos by date, month, year or alphabetically by name. 4 - Select one of 360 photos, and press OK to view it. • To view photos, select 360 Photos in the menu bar, select a photo thumbnail and press OK. • If there are several 360 photos in the same folder, select a 360 photo and press  Slide show to start a slide show of all 360 photos in the folder. • Watch a photo and press  INFO to show below: Progress bar, Playback control bar,  (Jump to the previous photo in a folder),  (Jump to the next photo in a folder),  (Start slideshow playback),  (Pause the playback),  (Play all/Play one),  (Little Planet),  (Auto Mode/Manual mode). - Little Planet: An alternate and fun view of 360 photos. When Little Planet view is started, the 360 photo is rendered in a wrapped around view, like a planet. - Auto Mode/Manual mode: when the 360 player is started, it auto pans the selected 360 photo from left to right (0 to 360 degrees) in 360 view. When manual mode is entered, the 360 player stops auto panning/rotating to allow manually panning/rotating with the remote control keys. 17
Page: 18
360 Photo Options With a 360 photo on-screen, press  OPTIONS to… List/Thumbnails View 360 photos with list view or thumbnail view. Shuffle off, Shuffle on View the pictures in sequential order, or at random. Repeat, Play once View the pictures repeatedly or once only. Stop music Stop music playback. 9.4 Videos Play Videos To play a video on the TV… Select  Videos , select the file name and press OK. • To pause the video, press OK. Press OK again to continue. • To rewind or fast forward, press  or . Press the keys several times to speed up to 2x, 4x, 8x, 16x, 32x. • To jump to the next video in a folder, press OK to pause, then select  on screen and press OK. • To stop the video playback, press  (Stop). • To go back to the folder, press . Open video folder 1 - Press  SOURCES, select  USB and press OK. 2 - Select  USB Flash Drive and press  (right) to select the USB device you need. 3 - Select Videos and select one of video, you can press OK to play the selected video. • Select a video and press  INFO to show file information. • Playback a video and press  INFO to show below: Progress bar, Playback control bar,  (Jump to the previous video in a folder),  (Jump to the next video in a folder),  (Playback),  (Rewind),  (Fast forward),  (Pause the playback),  (Play all/Play one),  (Shuffle on/Shuffle off) Video Options During the video playback, press  OPTIONS to… List/Thumbnails View video files with list view or thumbnail view. Subtitles Display the subtitles if available, select On, Off, or On during mute. Shuffle off, Shuffle on Play videos in sequential order or at random. Repeat, Play once Play videos repeatedly or once. 9.5 Music Play Music Open music folder 1 - Press  SOURCES, select  USB and press OK. 2 - Select  USB Flash Drive and press  (right) to select the USB device you need. 3 - Select Music and select one of music, you can press OK to play the selected music. • Select a music and press  INFO to show file information. • Playback a music and press  INFO to show below: Progress bar, Playback control bar,  (Jump to the previous music in a folder),  (Jump to the next music in a folder),  (Playback),  (Rewind),  (Fast Forward),  (Pause the playback),  (Play all/Play one) Music Options During music playback, press  OPTIONS to… Shuffle off, Shuffle on Play songs in sequential order or at random. Repeat, Play once Play songs on a loop or just once. 18
Page: 19
10 Open TV Setting Menus 10.1 Home Menu Overview Press  (Home) to select one of below menus, then press OK. Sources This row contains available sources on this TV. Watch TV This row contains TV functions available to the user. Apps This row contains number of apps pre-installed. Search This row contains an interface to perform the search within this TV. Settings This row contains settings available to the user. You can reorder the icons on Home menus. To reposition icons, press OK. Alternatively, you can select the icon you want to reorder, and hold the OK key for 3 seconds until the arrows appear around the icon. Use navigation keys to move the highlighted icon to another location, then press OK. Press the BACK key to exit. 10.2 Frequent settings and All settings Settings menu: Press  (Home) > Settings key on the remote control to find frequent settings. • How to - Instructions on how to install channels, sort channels, update TV software, connect external devices and use the Smart functions on your TV. • Install Channels - Update channels or start a complete new channel installation. • Picture style - Select one of preset picture styles for ideal picture viewing. • Picture format - Select one of preset picture format which fits the screen. • Sound style - Select one of preset sound styles for ideal sound settings. • Audio out - Set the TV to play the sound on TV or on the connected audio system. • Ambilight style* - Select a preset Ambilight style. • Ambilight+hue* - Switch Ambilight+hue on or off. • Sleep timer - Set the TV to switch to standby automatically after a preset time. • Screen off - If you only listen to music on TV, you can switch off the TV screen. • Wireless and networks - Connect to your home network or adjust the network settings. • Picture settings - Adjust all picture settings. • All settings - View all settings menu. • Help - Diagnose and get more information about your TV. For more information, in Help, press the color key  Keywords and look up Help Menu for more information. All settings menu: Press  (home) key on the remote control, select Settings > All settings, and press OK. *Ambilight setting is only for models which support the Ambilight function. 10.3 All Settings Picture Settings Picture Style Select a style For easy picture adjustment, you can select a preset picture style.  (Home) > Settings > Picture style, press OK to change to next available option. The available Picture styles are... • Personal - The picture preferences you set during the first start up • Vivid - Ideal for daylight viewing • Natural - Natural picture settings • Standard - Most energy conscious setting • Movie - Ideal for watching movies • Game - Ideal for gaming* • Monitor - Ideal for computer monitor** * Picture style - Game is not available for some video sources. ** Picture style - Monitor is only available when HDMI source video is compatible with the PC application. Custom a style You can adjust and store picture settings in the 19
Page: 20
currently selected picture style, like Color, Contrast or Sharpness. Restore a style To restore the style to its original setting, go to  (Home) > Settings > All settings > Picture > Picture style, then press  Restore style. For HDR content The styles for HDR content are... • HDR Personal • HDR Vivid • HDR Natural • HDR Movie • HDR Game For Dolby Vision content The styles for Dolby Vision content are... • HDR Personal • HDR Vivid • Dolby Vision Bright • Dolby Vision Dark • HDR Game Color, Contrast, Sharpness, Brightness Adjust the picture color  (Home) > Settings > All settings > Picture > Color Press the arrows  (up) or  (down) to adjust the color saturation value of the picture. Adjust the picture contrast  (Home) > Settings > All settings > Picture > Contrast Press the arrows  (up) or  (down) to adjust the contrast value of the picture. You can decrease contrast value to reduce power consumption. Adjust the picture sharpness  (Home) > Settings > All settings > Picture > Sharpness Press the arrows  (up) or  (down) to adjust the sharpness value of the picture. Adjust the picture brightness  (Home) > Settings > All settings > Picture > Brightness Press the arrows  (up) or  (down) to set the level of brightness of the picture signal. Note: Setting of brightness much away from reference value (50) may result lower contrast. Expert mode picture settings Color Settings  (Home) > Settings > All settings > Picture > Expert mode settings Adjust the color enhancement  (Home) > Settings > All settings > Picture > Expert mode settings > Color enhancement Select Maximum, Medium, or Minimum to set the level of the color intensity and the details in bright colors. Select the preset color temperature  (Home) > Settings > All settings > Picture > Expert mode settings > Color temperature Select Normal, Warm, or Cool to set the color temperature for your preference. Customize color temperature  (Home) > Settings > All settings > Picture > Expert mode settings > Custom color temperature Select Custom in Color temperature menu to customize a color temperature yourself. Press the arrows  (up) or  (down) to adjust the value. Whitepoint alignment  (Home) > Settings > All settings > Picture > Expert mode settings > Whitepoint alignment Customize the whitepoint alignment based on the selected color temperature of the picture. Press the arrows  (up) or  (down) to adjust the value, and press  Reset to reset the value. 20
Page: 21
Contrast Settings Contrast Modes  (Home) > Settings > All settings > Picture > Expert mode settings > Contrast mode Select Normal, Optimized for picture, Optimized for energy saving to set the TV automatically reduces the contrast, for best power consumption or for best picture experience, or select Off to switch off the adjustment. HDR Plus  (Home) > Settings > All settings > Picture > Expert mode settings > HDR Plus Set HDR Plus to Off, Minimum, Medium, Maximum or Automatic to set the level at which the TV automatically shows superior contrast and brightness effect for HDR content. Note: Available when HDR (High-Dynamic Range) signal is detected. • The TV can play HDR programs from any HDMI connection, broadcast, Internet source (e.g. Netflix) or connected USB memory device. Dynamic Contrast  (Home) > Settings > All settings > Picture > Expert mode settings > Dynamic contrast Select Maximum, Medium, or Minimum to set the level at which the TV automatically enhances the details in the dark, middle and light areas of the picture. Video Contrast, Gamma Video contrast  (Home) > Settings > All settings > Picture > Expert mode settings > Video contrast Press the arrows  (up) or  (down) to adjust the video contrast level. Gamma  (Home) > Settings > All settings > Picture > Expert mode settings > Gamma Press the arrows  (up) or  (down) to set a non- linear setting for picture luminance and contrast. Ultra Resolution  (Home) > Settings > All settings > Picture > Expert mode settings > Ultra resolution Select On to have a superior sharpness in line edges and details. Picture Clean Noise reduction  (Home) > Settings > All settings > Picture > Expert mode settings > Noise reduction Select Maximum, Medium, Minimum to set the level for removing the noise in video content. Noise is mostly visible as small moving dots in on- screen picture. MPEG Artifact Reduction  (Home) > Settings > All settings > Picture > Expert mode settings > MPEG Artifact Reduction Select Maximum, Medium, Minimum to have different degrees of smoothing the artifacts in digital video content. MPEG artifacts are mostly visible as small blocks or jagged edges in on-screen images. Motion Settings Motion Styles Motion Styles  (Home) > Settings > All settings > Picture > Expert mode settings > Motion Styles Motion styles provides optimized motion setting modes for different video content. Select Off to switch off or select one of the motion styles to have a better viewing experience. (Movie, Sports, Standard, Smooth or Personal) Not available for below cases: •  (Home) > Settings > All settings > Picture style > Game. • Network/Internet streaming Ultra HD 50Hz/60Hz videos. 21
Page: 22
Natural Motion Natural Motion  (Home) > Settings > All settings > Picture > Expert mode settings > Natural Motion Natural Motion makes any movement smooth and fluent. • Select Maximum, Medium, Minimum to have different degrees for reducing the motion judder, visible in movies on TV. • Select Minimum or Off when noise appears in playing moving picture on-screen. Note: Only available when Motion styles set to Personal. Picture Format  (Home) > Settings > All settings > Picture > Picture format If the picture is not filling the whole screen, if black bars are showing on the top or bottom or at both sides, you can adjust the picture to fill the screen completely. To select one of the basic settings to fill the screen… • Wide screen – automatically zooms in the picture to wide screen. • Fill screen – automatically enlarges the picture to fill the screen. Picture distortion is minimal, subtitles remain visible. Not suitable for PC input. Some extreme picture formats may still show black bars. • Fit to screen – automatically zooms in the picture to fill the screen without distortion. Black bars may be visible. Not supported for PC input. • Original – shows the original format of the incoming picture.  (Home) > Settings > All settings > Picture > Picture format > Advanced To format the picture manually… • Shift – select on the arrows to shift the picture. You can only shift the picture when it is zoomed in. • Zoom – select on the arrows to zoom in. • Stretch – select on the arrows to stretch the picture vertically or horizontally. • Undo – select to return to the picture format you started with. Dolby Vision Notification  (Home) > Settings > All settings > Picture > Dolby Vision Notification Switch On or Off Dolby Vision notification when Dolby Vision content begins to play on your TV. Quick Picture Settings  (Home) > Settings > All settings > Picture > Quick picture settings • During the first installation, you did some picture settings in a few easy steps. You can redo these steps with Quick picture settings menu. • Select the picture setting you prefer and go to the next setting. • To do these steps, make sure the TV can tune to a TV channel or can show a program from a connected device. Sound Settings Sound Style Select a style For easy sound adjustment, you can select a preset sound style.  (Home) > Settings > All settings > Sound > Sound style The available sound styles are... • AI mode - Select AI mode for intelligent switching of sound style based on audio content. • Original - Most neutral sound setting • Movie - Ideal for watching movies • Music - Ideal for listening to music • Game - Ideal for gaming • News - Ideal for speech • Personal mode - Select to check more advanced sound settings Custom a style You can adjust and stored sound settings in the currently selected sound style. Personal Mode Sound Settings Speaker virtualizer  (Home) > Settings > All settings > Sound > Personal mode settings > Speaker virtualizer Select On or Auto (Dolby Atmos) to enable Dolby Atmos, which can add height dimension to sound. With height dimension, sound can be precisely placed and moved in three-dimensional space. 22
Page: 23
Clear dialog  (Home) > Settings > All settings > Sound > Personal mode settings > Clear dialog Select On to improve the sound for speech. Ideal for news programs. Equalizer  (Home) > Settings > All settings > Sound > Personal mode settings > Equalizer Press the arrows  (up) or  (down) to adjust the equalizer settings. * Note: To restore the Personal mode to its original setting, select Back to Sound style, then press  Restore style. TV Placement  (Home) > Settings > All settings > Sound > TV placement Select On a TV stand or On the wall to have best sound reproduction according to the setting. Advanced sound settings Volume Control Auto volume  (Home) > Settings > All settings > Sound > Advanced > Auto volume Select On to automatically level out sudden volume differences. Typically when you are switching channels. Select Night mode for a more comfortable, quiet listening experience. Delta volume  (Home) > Settings > All settings > Sound > Advanced > Delta volume Press the arrows  (up) or  (down) to adjust the delta value for TV speaker volume. * Note: Delta volume is available when the input source is set to HDMI or Analog sources and the Audio out is set to TV speakers or HDMI sound system. Audio Out Settings  (Home) > Settings > All settings > Sound > Advanced > Audio out Set the TV to play the sound on TV or on the connected audio system. You can select where you want to hear the TV sound and how you want to control it. • If you select TV Speakers off, you permanently switch off the TV speakers. • If you select TV Speakers, the TV speakers are always on. All the sound-related settings are applicable to this mode. • If you select Headphones, the sound will be played through headphones. • If you select TV Speakers + Headphones, the sound will be played through TV speakers and headphones. To adjust the volume of TV speakers or headphones, press Volume and press the arrows  (right) or  (left) to select the output source you want to adjust. Press the arrows  (up) or  (down) to adjust the volume. • With an audio device connected with Bluetooth, select one of your connected Bluetooth audio devices. The TV will switch off the TV speakers when the device is playing the sound. • With an audio device connected with HDMI CEC, select HDMI sound system. The TV will switch off the TV speakers when the device is playing the sound. Digital Output Settings Digital output settings are available for SPDIF output (optical) and HDMI ARC sound signals. Digital out format  (Home) > Settings > All settings > Sound > Advanced > Digital out format Set the audio out signal of the TV to fit the sound capabilities of the connected Home Theatre System. • Stereo (uncompressed): If your audio playback devices have no multichannel sound processing, select to only output stereo content to your audio playback devices. • Multichannel: Select to output multichannel audio content (compressed multichannel sound signal) or stereo audio content to your audio playback devices. • Multichannel (bypass): Select to send original bitstream from HDMI ARC to the connected HDMI sound system. - Make sure your audio playback devices support Dolby Atmos feature. 23
Page: 24
- SPDIF output (DIGITAL AUDIO OUT) will be disabled when streaming Dolby Digital Plus content. Digital out leveling  (Home) > Settings > All settings > Sound > Advanced > Digital out leveling Adjust the loudness level from device which is connected to digital audio output (SPDIF) or HDMI. • Select More to have louder volume. • Select Less to have softer volume. Digital out delay  (Home) > Settings > All settings > Sound > Advanced > Digital out delay For some Home Theater Systems you might need to adjust the audio sync delay to synchronize the audio to the video. Select Off if a sound delay is set on your Home Theater System. Digital out offset (Only available when Digital out delay set to On)  (Home) > Settings > All settings > Sound > Advanced > Digital out offset • If you cannot set a delay on the Home Theater System, you can set the TV to sync the sound. • You can set an offset that compensates for the time necessary for the Home Theater System to process the sound of the TV picture. • You can set the value in steps of 5ms. Maximum setting is 60ms. General Settings Connection Related Settings Format USB Hard Drive  (Home) > Settings > All settings > General settings > Format USB Hard Drive You need to set up and format a USB Hard Drive before you record a channel. USB Keyboard Settings  (Home) > Settings > All settings > General settings > USB keyboard settings To install the USB keyboard, switch on the TV and connect the USB keyboard to one of the USB connections on the TV. When the TV detects the keyboard for the first time, you can select your keyboard lay-out and test your selection. Mouse Settings  (Home) > Settings > All settings > General settings > Mouse settings Adjust the motion speed of the USB mouse. HDMI-CEC Connection - EasyLink Connect HDMI CEC-compatible devices to your TV, you can operate them with the TV remote control. EasyLink HDMI CEC must be switched on on the TV and the connected device. Switch on EasyLink  (Home) > Settings > All settings > General settings > EasyLink > EasyLink > On Operate HDMI CEC-compatible devices with TV remote control  (Home) > Settings > All settings > General settings > EasyLink > EasyLink remote control > On Note: - EasyLink might not work with devices from other brands. - The HDMI CEC functionality has different names on different brands. Some examples are: Anynet, Aquos Link, Bravia Theater Sync, Kuro Link, Simplink and Viera Link. Not all brands are fully compatible with EasyLink. Example HDMI CEC branding names are property of their respective owners. HDMI Ultra HD  (Home) > Settings > All settings > General settings > Input sources > HDMI (port) > HDMI Ultra HD This TV can display Ultra HD signals. Some devices - connected with HDMI - do not recognize a TV with 24
Page: 25
Ultra HD and might not work correctly or show distorted picture or sound. To avoid the malfunctioning of such a device, you can set the signal quality to a level the device can handle. If the device is not using Ultra HD signals, you can switch off Ultra HD for this HDMI connection. • The setting Optimal allows maximum up to Ultra HD (50Hz or 60Hz) RGB 4:4:4 or YCbCr 4:4:4/4:2:2/4:2:0 signals. • The setting Standard allows maximum up to Ultra HD (50Hz or 60Hz) YCbCr 4:2:0 signals. Supported format for HDMI Ultra HD options: • Resolution: 3840 x 2160 • Frame rate (Hz): 50Hz, 59.94Hz, 60Hz • Video data sub-sampling (bit-depth) - 8 bit: YCbCr 4:2:0, YCbCr 4:2:2*, YCbCr 4:4:4*, RGB 4:4:4* - 10 bit: YCbCr 4:2:0*, YCbCr 4:2:2* - 12 bit: YCbCr 4:2:0*, YCbCr 4:2:2* * Supported only when HDMI Ultra HD is set to Optimal. Digital Caption Options This allows you to modify how digital captions are displayed.  (Home) > Settings > All settings > General settings > Digital caption options • Custom settings: Select Automatic or Manual. If Manual mode is selected, you can select from the following options to change the visual characteristics of the TV's digital captioning. • Size: Select to choose a caption display size according to your own preference. • Text Color: Select a caption display text color. • Text opacity: Select the text opacity. • Background Color: Select a caption display character background color. • Background opacity: Select the background opacity options. • Edge type: Select the edge type. • Edge color: Select the caption display edge color. Eco Settings Set energy saving level  (Home) > Settings > All settings > General settings > Eco settings > Energy saving Select Minimum, Medium, or Maximum to have different degrees for energy saving, or select Off to switch off energy saving mode. Set screen off to save energy consumption  (Home) > Settings > All settings > General settings > Eco settings > Screen off Select Screen off, the TV screen is switched off, to switch the TV screen back on, press any key on the remote control. Set TV switch off timer  (Home) > Settings > All settings > General settings > Eco settings > Switch off timer Press the arrows  (up) or  (down) to adjust the value. The value 0 (Off) deactivates the automatic switch off. Select Switch off timer, the TV switches off automatically to save energy. • TV switches off if receiving a TV signal but you don't press a key on the remote control during a 4 hour period. • TV switches off if not receiving a TV signal nor a remote control command for 10 minutes. • If you use the TV as a monitor or use a digital receiver to watch TV (a Set-Top Box - STB) and you do not use the remote control of the TV, you should deactivate this automatic switch off, to set the value to 0. Location - Home or Shop  (Home) > Settings > All settings > General settings > Location • Select the location of your TV • Select Shop, the picture style is switched back to Vivid, and can adjust shop settings. • Shop mode is for in-store promotion. Shop Setup  (Home) > Settings > All settings > General settings > Shop setup If the TV is set to Shop, you can view feature logos or set the availability of a specific demo for in store use. Adjust picture and audio  (Home) > Settings > All settings > General settings > Shop setup > Picture and audio Select Optimized to shop or Custom settings for picture and audio settings. 25
Page: 26
Logos and banner  (Home) > Settings > All settings > General settings > Shop setup > Logos and banner Set to display Feature logos and Promotional banner. Demo Me autostart  (Home) > Settings > All settings > General settings > Shop setup > Demo Me autostart Turn On/Off the Demo Me autostart. Manage demos  (Home) > Apps > Demo me > Manage demos If the TV is set to Shop, you can manage the demo videos in the Demo me app. Play demo video  (Home) > Apps > Demo me > Manage demos > Play Select a demo video file and play. Copy demo file  (Home) > Apps > Demo me > Manage demos > Copy to USB Copy demo file to USB drive. Delete demo file  (Home) > Apps > Demo me > Manage demos > Delete Delete demo file from your TV. Configuration of demo  (Home) > Apps > Demo me > Manage demos > Configuration Set the TV to Main TV or Sub TV. Download new demo file  (Home) > Apps > Demo me > Manage demos > Download new If the Configuration is set to Man TV, you can download a new demo file. Auto delay setting  (Home) > Apps > Demo me > Manage demos > Auto delay setting Set the Auto delay time from 15 seconds to 5 minutes . Auto loop selection  (Home) > Apps > Demo me > Manage demos > Auto loop selection Select a demo file for auto loop play. Reset TV Settings and Reinstall TV Reset all settings value to original TV settings  (Home) > Settings > All settings > General settings > Factory settings Redo full TV installation , and set TV status back to the first time you switch on  (Home) > Settings > All settings > General settings > Reinstall TV Enter PIN code and select Yes, the TV will reinstall completely. All settings will be reset, and installed channels will be replaced. The installation can take a few minute Region and Language Settings Language  (Home) > Settings > All settings > Region and language > Language Change the language of the TV menu and messages  (Home) > Settings > All settings > Region and language > Language > Menu language Clock  (Home) > Settings > All settings > Region and language > Clock Correct clock automatically  (Home) > Settings > All settings > Region and language > Clock > Auto clock mode • The standard time setting for the TV clock is Automatic. The time information comes from the broadcasted UTC - Coordinated Universal Time information. • If the clock is not correct, you can set the TV clock to Country dependent. • When select Country dependent, you can set the time for Automatic, Standard time, or Daylight saving time. Correct clock manually  (Home) > Settings > All settings > Region and 26
Page: 27
language > Clock > Auto clock mode > Manual  (Home) > Settings > All settings > Region and language > Clock > Date, Time Go to previous menu, and select Date and Time to adjust the value. Note: • If none of the automatic settings display the time correctly, you can set the time manually. • If you schedule recordings from the TV Guide, we recommend not to change the time and date manually. Set the TV to switch to Standby automatically after a preset time  (Home) > Settings > All settings > Region and language > Clock > Sleep timer. Set the TV to switch to Standby automatically after a preset time. With the slider bar you can set the time to up to 180 minutes in increments of 5 minutes. If set to 0 minutes, the sleep timer is switched off. You can always switch off your TV earlier or reset the time during the countdown Lock Settings Set Code and Change Code  (Home) > Settings > All settings > Child lock > Set code, Change code Set new code or reset change code. The child lock code is used to lock or unlock channels or programs. Note: If you forgot your PIN code, you can override the current code use 8888 and enter a new code. App lock  (Home) > Settings > All settings > Child lock > App lock You can lock apps unsuited for children. The App lock asks for a PIN code when you try to start an 18+ rated app. This lock is only valid for 18+ rated apps from the Philips apps. Channel Lock  (Home) > Settings > All settings > Child lock > Channel lock To prevent children from watching a channel, you can set a lock to block the channels. In a channel list, a locked channel is marked with a lock . 27
Page: 28
11 Networks 11.1 Home Network To enjoy the full capabilities of your Philips Smart TV, your TV must be connected to the Internet. Connect the TV to a home network with a high-speed Internet connection. You can connect your TV wirelessly or wired to your network router. 11.2 Connect to Network Wireless Connection What You Need To connect the TV to the Internet wirelessly, you need a Wi-Fi router with a connection to the Internet. Use a high-speed (broadband) connection to the Internet. Turn Wi-Fi On or Off  (Home) > Settings > All settings > Wireless and networks > Wi-Fi On/Off Make the Connection Make the Connection - Wireless  (Home) > Settings > All settings > Wireless and networks > Connect to network > Wireless 1 - In the list of found networks, select on your wireless network. If your network is not in the list because the network name is hidden (you switched off the SSID broadcast of the router), select Add New Network to enter the network name yourself. 2 - Depending on the type of router, enter your encryption key - WEP, WPA or WPA2. If you entered the encryption key for this network before, you can select OK to connect immediately. 3 - A message will be shown when the connection is successful. Make the Connection - WPS  (Home) > Settings > All settings > Wireless and networks > Connect to network > WPS If your router has WPS, you can directly connect to the router without scanning for networks. If you have devices in your wireless network that use the WEP security encryption system, you cannot use WPS. 1 - Go to the router, press the WPS button and return to the TV within 2 minutes. 2 - Select Connect to make the connection. 3 - A message will be shown when the connection is successful. Make the Connection - WPS with PIN Code  (Home) > Settings > All settings > Wireless and networks > Connect to network > WPS with PIN Code If your router has WPS with a PIN code, you can directly connect to the router without scanning for networks. If you have devices in your wireless network that use the WEP security encryption system, you cannot use WPS. 1 - Write down the 8-digit PIN code shown on screen and enter it in the router software on your PC. Consult the router manual on where to enter the PIN code in the router software. 2 - Select Connect to make the connection. 3 - A message will be shown when the connection is successful. Wired Connection What You Need To connect the TV to the Internet, you need a network router with a connection to the Internet. Use a high-speed (broadband) connection to the Internet. 28
Page: 29
Make the Connection  (Home) > Settings > All settings > Wireless and networks > Connect to network > Wired 1 - Connect the router to the TV with a network cable (Ethernet cable**). 2 - Make sure that the router is turned on. 3 - The TV constantly searches for the network connection. 4 - A message will be shown when the connection is successful. If the connection fails, you can check the DHCP setting of the router. DHCP should be switched on. **To fulfill EMC regulations, use a shielded FTP Cat. 5E Ethernet cable. 11.3 Wireless and Network Settings View Network Settings  (Home) > Settings > All settings > Wireless and networks > View network settings You can view all current network settings here. The IP and MAC address, signal strength, speed, encryption method, etc. Network Configuration - Static IP  (Home) > Settings > All settings > Wireless and networks > Network configuration > Static IP If you are an advanced user and want to install your network with Static IP addressing, set the TV to Static IP. Network Configuration - Static IP Configuration  (Home) > Settings > All settings > Wireless and networks > Static IP configuration 1 - Select Static IP configuration and configure the connection. 2 - You can set the number for the IP Address, Netmask, Gateway, DNS 1, or DNS 2. Switch On with Wi-Fi (WoWLAN)  (Home) > Settings > All settings > Wireless and networks > Switch On with Wi-Fi (WoWLAN) You can switch this TV on from your smartphone or tablet if the TV is in Standby. The setting Switch On with Wi-Fi (WoWLAN) must be switched on. Digital Media Renderer - DMR  (Home) > Settings > All settings > Wireless and networks > Digital Media Renderer - DMR If your media files do not play on your TV, make sure that the Digital Media Renderer is turned on. As a factory setting, DMR is turned on. Switch on Wi-Fi connection  (Home) > Settings > All settings > Wireless and networks > Wi-Fi On/Off You can switch on or off Wi-Fi connection on your TV. Reset Wi-Fi Miracast connection  (Home) > Settings > All settings > Wireless and networks > Reset Wi-Fi Miracast connection Clear the list of connected and blocked devices that are used with Miracast. TV network name  (Home) > Settings > All settings > Wireless and networks > TV network name If you have more than one TV in your home network, you can give the TV a unique name. Netflix settings  (Home) > Settings > All settings > Wireless and networks > Netflix settings With Netflix settings, you can view the ESN number or deactivate a Netflix device. Clear Internet Memory  (Home) > Settings > All settings > Wireless and networks > Clear Internet Memory With Clear Internet Memory you clear your Philips server registration and parental rating settings, your video store app logins, all Philips App Gallery favorites, Internet bookmarks and history. Interactive MHEG applications can also save so-called 'cookies', on your TV. These files will also be cleared. 29
Page: 30
12 Smart TV 12.1 Setup Smart TV The first time you open Smart TV, you need to configure your connection. Read and agree to the terms and conditions to continue. The Smart TV start page is one of your links to the Internet. Open Smart TV To open the Smart TV start page, press  Smart TV . Alternatively, you can press  (Home) > Apps, select  Smart TV and press OK. The TV connects to the Internet and opens the Smart TV start page. This may take a few seconds. Close Smart TV To close the Smart TV start page, press EXIT. TP Vision Europe B.V. bears no responsibility regarding the content and the quality of the content provided by the content service providers. 12.2 Smart TV Start Page Your Apps Start apps from the Smart TV start page. Internet The Internet App opens the World Wide Web on your TV. On your TV, you can view any Internet website but most of them are not tailored for a TV screen. - Some plug-ins (e.g. to view pages or videos) are not available on your TV. - Internet pages are shown one page at a time and full screen. Recommended Apps In this window, Philips presents a range of recommended Apps for your country, Apps for Online TV or a selection of rental movies from Video stores. You can select and open them from the Recommended Apps window. 12.3 App Gallery Open the App Gallery on home screen to browse the Apps, the collection of tailored websites for TV. Find the App for YouTube videos, a national newspaper, an online photo album, etc. There are Apps to rent a video from an online video store and Apps for watching programs you missed. If the App gallery does not have what you are looking for, try the World Wide Web and surf the Internet on your TV. Search With Search, you can search the App Gallery for apps. Enter a keyword in the text field, select  and press OK to start searching. You can enter names, titles, genres and description keywords to search. Alternatively, you can leave the text field empty and search for the most popular searches/keywords for a range of categories. Select a keyword from list of keywords found and press OK to search for items with that keyword. 30
Page: 31
13 Ambilight 13.1 Ambilight Style  (Home) > Settings > All settings > Ambilight > Ambilight style You can select the way Ambilight follows. Follow Video  (Home) > Settings > Ambilight > Ambilight style > Follow video Select one of the styles that follow the dynamics of the picture on your TV screen. • Standard time - Ideal for day-to-day TV watching • Natural - Follows the picture or sound as truthfully as possible • Football - Ideal for football games • Vivid - Ideal for daylight viewing • Game - Ideal for gaming • Comfort - Ideal for a quiet evening • Relax - Ideal for a lounge feeling Follow Audio  (Home) > Settings > All settings > Ambilight > Ambilight style > Follow audio Select one of the styles that follow the dynamics of the sound. • Lumina - Mixes audio dynamics with video colors • Colora - Based on audio dynamics • Retro - Based on audio dynamics • Spectrum - Based on audio dynamics • Scanner - Based on audio dynamics • Rhythm - Based on audio dynamics • Party - A mix of all Follow audio styles, one after the other Follow Color  (Home) > Settings > All settings > Ambilight > Ambilight style > Follow Color Select one of the preset color styles. • Hot lava - Red color variations • Deep water - Blue color variations • Fresh nature - Green color variations • Warm white - Warm white color variations • Cool white - Cool white color variations Follow Flag  (Home) > Settings > All settings > Ambilight > Ambilight style > Follow flag Select one of the preset flag styles. Follow App  (Home) > Settings > Ambilight > Ambilight style > Follow app This function is available when you control Ambilight with an app. 13.2 Ambilight Brightness, Saturation Brightness  (Home) > Settings > All settings > Ambilight > Brightness Press the arrows  (up) or  (down) to set the level of Ambilight brightness. Saturation  (Home) > Settings > All settings > Ambilight > Saturation Press the arrows  (up) or  (down) to set the level of Ambilight saturation. 13.3 Ambilight+hue Configure the Hue Bulbs Step 1 - Network  (Home) > Settings > All settings > Ambilight > Ambilight + hue > Configure the hue bulbs In this first step, you will prepare the TV to find the Philips Hue Bridge. The TV and the Philips Hue Bridge must use the same network. Setting up… 1 - Connect the Philips Hue Bridge to the power outlet. 2 - Connect the Philips Hue Bridge to the same router you are using for the TV — use an Ethernet cable to connect. 31
Page: 32
3 - Switch on the Hue bulbs. To start the configuration… 1 - Press  (Home) > Settings > All settings > Ambilight > Ambilight + hue > Configure the hue bulbs. 2 - Select Start now and press OK. The TV will search for the Philips Hue Bridge. If the TV is not yet connected to your network, the TV will start the network setup first. If the Philips Hue Bridge appears in the list, select the Hue Bridge you want to use. For more info on connecting the TV to your home network, in Help, press the color key  Keywords and look up Network Settings. Step 2 - Hue Bridge In the next step, you will link up the TV with the Philips Hue Bridge. The TV can only be linked up to one Hue Bridge. To link the Hue Bridge… 1 - With the TV connected to your home network, it will show the available Hue Bridges. If the TV did not find your Hue Bridge yet, you can select Scan again and press OK. If the TV found the only Hue Bridge you have, select the Hue Bridge name and press OK. If you have more than one Hue Bridge available, select the Hue Bridge you want to use and press OK. 2 - Select Start and press OK. 3 - Now go to the Philips Hue Bridge and press the link button in the middle of the device. This will link the Hue Bridge with the TV. Do this within 30 seconds. The TV will confirm if a Hue Bridge is now linked to the TV. 4 - Select OK and press OK. With the Philips Hue bridge linked to the TV, go to page Hue bulbs. Step 3 - Hue Bulbs In the next step, you will select the Philips Hue bulbs that have to follow the Ambilight. You can select a maximum of 9 Philips Hue bulbs for Ambilight+hue. To select the bulbs for Ambilight+hue… 1 - In the list, mark the bulbs that have to follow the Ambilight. To mark a bulb, select the bulb name and press OK. When you mark a bulb, the bulb will blink once. 2 - When you’re done, select OK and press OK. Step 4 - Configure Bulb In the following step, you will configure each Philips Hue bulb. To configure each Hue bulb… 1 - Select a bulb to configure and press OK. The bulb you selected is flashing. 2 - Select Start and press OK. 3 - First indicate where you placed the bulb relative to the TV. A correct setting of the Angle will send the correct Ambilight color to the bulb. Select the slider bar to adjust the position. 4 - Secondly, indicate the Distance between the bulb and the TV. The further away from the TV, the weaker the Ambilight color. Select the slider bar to adjust the distance. 5 - Finally, set the Brightness of the bulb. Select the slider bar to adjust the brightness. 6 - To stop configuring this bulb, select OK and press OK. 7 - In the Configure Ambilight+hue menu, you can do the same for each bulb. 8 - When all Ambilight+hue bulbs are configured, select Finish and press OK. Ambilight+hue is ready for use. Ambilight+hue Settings  (Home) > Settings > All settings > Ambilight > Ambilight + hue > Switch off Switch off Ambilight+hue  (Home) > Settings > All settings > Ambilight > Ambilight + hue > Immersion Press the arrows  (up) or  (down) to adjust how accurate the Hue bulbs follow the Ambilight.  (Home) > Settings > All settings > Ambilight > Ambilight + hue > Lounge light+hue If you installed Ambilight+hue, you can let the hue bulbs follow Lounge light from Ambilight. The Philips hue lamps will expand the Lounge light effect across the room.  (Home) > Settings > All settings > Ambilight > Ambilight + hue > View configuration View current setup of the Ambilight+hue, network, 32
Page: 33
Bridge and bulbs.  (Home) > Settings > All settings > Ambilight > Ambilight + hue > Reset configuration Reset current setup of the Ambilight+hue. 13.4 Advanced Ambilight Settings Wall color  (Home) > Settings > All settings > Ambilight > Advanced > Wall color • Neutralize the influence of a colored wall on the Ambilight colors • Select the color of the wall behind the TV and the TV will modify the Ambilight colors to appear as they are intended. TV switch off  (Home) > Settings > All settings > Ambilight > Advanced > TV switch off Set Ambilight to switch off immediately or slowly fade out when you switch off the TV. The slow fade out gives you some time to switch on the lights in your living room. 13.5 Lounge Light Mode The lounge light mode of your TV allows you to switch on Ambilight when the TV is in standby. Now you can light up your room with Ambilight. After putting your TV on standby, if you want to switch on the Ambilight lounge light, follow these steps: 1 - Press the Ambilight button. 2 - After pressing the Ambilight button, the Ambilight lounge light is switched on. 3 - Press the Ambilight button again if you want to change to a different lighting effect. 4 - To switch off the Ambilight lounge light, press the Ambilight button until you see the light turn off. You may need to press the Ambilight button a few times. 33
Page: 34
14 Netflix If you have a Netflix membership subscription, you can enjoy Netflix on this TV. Your TV must be connected to the Internet. To open Netflix, press  to open the Netflix App. You can open Netflix immediately from a TV in standby. www.netflix.com 34
Page: 35
15 Amazon Prime Video With Amazon Prime membership, you gain access to thousands of popular movies and TV show, including exclusive Prime Originals. Press the app icon to open the Amazon Prime Video app. Your TV must be connected to the Internet to use the app. For more information about Amazon Prime Video, visit www.primevideo.com. 35
Page: 36
16 YouTube YouTube provides a platform to connect to the world. Watch and discover popular videos uploaded by YouTube users around the world. Use the YouTube app to explore the latest topics on music, news, and more. Press the app icon to open the YouTube app. Your TV must be connected to the Internet to use the app. For more information about YouTube, visit www.youtube.com. 36
Page: 37
17 Environmental 17.1 Energy Label The Energy Label informs you of the energy efficiency class of this product. The greener the energy efficiency class is, the less energy it consumes. The label shows the energy efficiency class, the average power consumption of this product in use and the average energy consumption for 1 year. You can also find the power consumption values for this product on the Philips website for your country at www.philips.com/TVsupport. 17.2 End of Use Disposal of your old product and batteries Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product, it means that the product is covered by European Directive 2012/19/EU. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health. Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed with normal household waste. Please find out for yourself about the local rules on separate collection of batteries because correct disposal will help to prevent negative consequences for the environment and human health. 37
Page: 38
18 Specifications 18.1 Power Product specifications are subject to change without notice. For more specification details of this product, see www.philips.com/TVsupport Power • Voltage: AC 220V • Ambient temperature: 5°C to 35°C 18.2 Reception • Antenna input: 75 ohm coaxial (F-type) • Tuner bands: UHF, VHF • ATSC • Analogue video playback: SECAM, PAL • Digital video playback: MPEG2 SD/HD (ISO/IEC 13818-2), MPEG4 SD/HD (ISO/IEC 14496-10), HEVC* • Digital audio playback (ISO/IEC 13818-3) 18.3 Display Resolution Diagonal screen size • 55PUN67x4: 139 cm / 55 inch • 65PUN67x4: 164 cm / 65 inch Display resolution • 3840 x 2160 18.4 Supported Input Resolution - Video Support Timing Video support timing also includes field/frame rate 23.976Hz, 29.97Hz and 59.94Hz. HDMI • 480i • 480p • 720p • 1080i • 1080p • 3840 x 2160p - 24Hz, 25Hz, 30Hz, 50Hz, 60Hz HDMI - UHD  (Home) > Settings > General settings > Input sources > HDMI (port) > HDMI Ultra HD This TV can display Ultra HD signals. Some devices - connected with HDMI - do not recognize a TV with Ultra HD and might not work correctly or show distorted picture or sound. To avoid the malfunctioning of such a device, you can set the signal quality to a level the device can handle. If the device is not using Ultra HD signals, you can switch off Ultra HD for this HDMI connection. • The setting Optimal allows maximum up to Ultra HD (50Hz or 60Hz) RGB 4:4:4 or YCbCr 4:4:4/4:2:2/4:2:0 signals. • The setting Standard allows maximum up to Ultra HD (50Hz or 60Hz) YCbCr 4:2:0 signals. Composite • PAL, NTSC, SECAM 18.5 Supported Input Resolution - Computer • 640 x 480 - 60Hz • 800 x 600 - 60Hz • 1024 x 768 - 60Hz • 1280 x 800 - 60Hz • 1280 x 960 - 60Hz • 1280 x 1024 - 60Hz • 1366 x 768 - 60Hz • 1440 x 900 - 60Hz • 1920 x 1080 - 60Hz • 3840 x 2160 - 60Hz Note: For HDMI input only. 18.6 Sound • Dolby® Atmos Virtualizer • Clear Dialog • A.I. Sound • 5 Band Equalizer • Output power (RMS): 20W • Dolby® Audio • DTS® 38
Page: 39
18.7 Multimedia Connections • USB 2.0/USB 3.0 • Ethernet LAN RJ-45 • Wi-Fi 802.11n (built-in) Supported USB file systems • FAT, NTFS Playback formats • Video Codec: AVI, MKV, HEVC, H.264/MPEG-4 AVC, MPEG1, MPEG2, MPEG4, WMV9/VC1, VP9 • Audio Codec: MP3, WAV, AAC, WMA (v2 up to v9.2), WMA-PRO (v9 and v10) • Subtitles: - Format: SRT, SMI, SSA, SUB, ASS, TXT - Character encodings: UTF-8, Central Europe and Eastern Europe (Windows-1250), Cyrillic (Windows-1251), Greek (Windows-1253), Turkish (Windows-1254), Western Europe (Windows-1252) • Image Codec: JPEG, GIF, PNG, BMP, HEIF, 360 photo Wi-Fi Certified This TV supports Miracast certified devices. Performance may vary, depending on the capabilities of the mobile device and the software used. 18.8 Connectivity TV Side • AV IN: CVBS, Audio L/R • USB 2: USB 3.0 • HDMI 3 in: UHD - HDR • Headphones: Stereo mini-jack 3.5mm TV Bottom • Digital Audio out: Optical • USB 1: USB 2.0 • Network LAN: RJ45 • SERV.U - "SERV.U" is used by customer service to troubleshoot any faults. • Antenna (75 ohm) • HDMI 1 in: ARC - UHD - HDR • HDMI 2 in: UHD - HDR 39
Page: 40
19 Troubleshooting 19.1 Tips If you can't find a solution for your TV problem in Troubleshooting, you can use  Keywords in Help > User manual to find the information you are looking for. Select a keyword to go the most relevant page in the User manual. If the User manual doesn't answer your question, you can go to the support website of Philips. To solve any Philips TV related problem, you can consult our online support. You can select your language and enter your product model number. Go to www.philips.com/TVsupport. On the support site you can find your country's telephone number to contact us as well as answers to frequently asked questions (FAQs). In some countries, you can chat with one of our collaborators and ask your question directly or send a question by email. You can download new TV software or the manual to read on your computer. For more TV troubleshooting and frequently asked questions (FAQs)... Go to http://philips-tvconsumercare.kxondemand.com/ portal/en/ModelSelect TV Help on your tablet, smartphone or computer To carry out extended sequences of instructions more easily, you can download the TV Help in PDF format to read on your smartphone, tablet or computer. Alternatively, you can print the relevant Help page from your computer. To download the Help (user manual) go to www.philips.com/TVsupport 19.2 Switch On The TV does not switch on • Disconnect the power cable from the power outlet. Wait for one minute then reconnect it. Make sure that the power cable is securely connected. Try switching on again. • Connect the TV to another wall mains socket and try switching on. • Disconnect all connected devices from the TV and try switching on. • If the standby light on TV is on, the TV might not respond to the remote control. Creaking sound at startup or switch off When you are turning the TV on or standby, you hear a creaking sound from the TV chassis. The creaking sound is due to the normal expansion and contraction of the TV as it cools and warms up. This does not affect performance. The TV goes back to standby after showing the Philips startup screen When the TV is in standby, a Philips startup screen is displayed, then the TV returns to standby mode. This is normal behavior. When the TV is disconnected and reconnected to the power supply, the startup screen is displayed at the next startup. To switch on the TV from standby, press  (Standby / On) the remote control or the TV. The standby light keeps on blinking Disconnect the power cable from the power outlet. Wait 5 minutes before you reconnect the power cable. If the blinking reoccurs, contact Philips TV Consumer Care. In Help > User manual, press the color key  Keywords and look up Contact Info. TV switches off by itself If the TV switches off suddenly, the setting switch off timer might be switched on. With switch off timer the TV switches off after 4 hours if no remote control signals were received. To avoid this automatic switch off, you can deactivate this switch off. In Help > User manual, press the color key  Keywords and look up switch Off Timer. Also, if the TV does not receive a TV signal nor a remote control command for 10 minutes, the TV switches off automatically. 19.3 Remote Control TV does not respond to the remote control • The TV requires some time to start up. During this time, the TV does not respond to the remote control or TV controls. This is normal behavior. • The batteries of the remote control might be empty. Replace the batteries with new ones. 19.4 Channels No digital channels found during the installation • Check if the TV was connected with an antenna or is using a provider signal. Check the cable connections. • Check if the country where you install the TV, has 40
Page: 41
digital channels available. • Check if you selected the correct system. Select Antenna when you use an antenna or common antenna. Select Cable if you use a TV cable service. • Redo the installation and check if you select the correct system. No analog channels found during the installation • Check if the TV was connected with an antenna. Check the cable connections. • Check if you selected the correct system. Select Antenna when you use an antenna or common antenna. Some channels disappeared, cannot find all or some previously installed channels • Check if you selected the correct Channel list or Favorites list you normally use. • Some channels might be moved or even deleted by the broadcaster. In the normal channels list, try to search for the channel you're missing. If the channel is still available, you can put it back in the favorites list. 19.5 Picture No picture / distorted picture • Check if the TV is connected with an antenna or is using a provider signal. Check the cable connections. • Check if the correct source/input is selected in the sources menu. Press  Sources and select the source/input you need. • Check if the external device or source is properly connected. • Check if the reception is poor. • Check if the picture is set to a minimal value. Select Picture style and select a style and press OK.  (Home) > Settings > All settings > Picture > Picture style • To check if the TV is broken, try to play a video clip. Press  (Home) > Settings > Help > Check the TV. If the video clip stays black, call Philips. Wait until the clip ends and select Contact info in the Help menu. Call the telephone number for your country. Sound but no picture • Change to other video sources and then change back to current source. • Select Picture style and select a style and press OK.  (Home) > Settings > All settings > Picture > Picture style • Restore picture style, select back to Picture style, then press  Restore style. • Reset all TV settings, go to  (Home) > Settings > All settings > General settings > Reinstall TV. • Check the connections of the source/input devices. Poor reception If the TV picture is distorted or variable in quality, the input signal might be poor. A weak digital signal is seen as a picture that is breaking up in square blocks and freezes occasionally. Much sooner than a bad analog signal, a bad digital signal will fall away. • Check if the antenna cable is properly connected. • Large loudspeakers, unearthed audio devices, neon lights, high buildings and other large objects can influence reception quality when you are using an antenna. Try to improve the reception by changing the antenna direction or moving devices away from the TV. Bad weather might deteriorate the reception. • Check if all connections, to and from your devices, are properly connected. Poor picture from a device • Make sure that the device is connected properly. Make sure that the device's output video setting is the highest possible resolution if applicable. • Restore picture style or change to another picture style. Picture settings change after a while Make sure that Location is set to Home . You can change and save settings in this mode.  (Home) > Settings > All settings > General settings > Location A banner appears If an on screen promotion banner appears occasionally or the Picture style automatically switches back to Vivid at startup, the TV is in Shop location. Set the TV to Home location for use at home.  (Home) > Settings > All settings > General settings > Location Picture does not fit the screen / Wrong or unstable picture size / Picture position is incorrect • If the picture size—its aspect ratio—does not fit the screen, with black bars on the top and bottom or left and right side of the screen, press  (Home) > Settings > All settings > Picture > Picture Format > Fill screen. • If the picture size changes constantly, press  (Home) > Settings > All settings > Picture > Picture Format > Fit to screen. • If the position of the picture is incorrect, try to check the signal resolution and output type of the connected device, and press  (Home) > Settings > All settings > Picture > Picture Format > Original. Computer picture is not stable Make sure that your PC uses the supported resolution and refresh rate.  (Home) > Settings > All settings > Picture > 41
Page: 42
19.6 Sound No sound or poor sound quality • Check if the sound settings of the TV are OK, press the  volume or  mute key. • If you use a digital receiver (set-top box), check if the volume on this receiver is not set to zero or mute. • Check if the TV - the audio signal - is properly connected with the Home Theater System, if you use such a system for the TV sound. Check if you connected the HDMI cable to an HDMI1 ARC connection on the Home Theater System. • Make sure that the TV audio output is connected to the audio input on the Home Theater System. Sound should be heard from the HTS (Home Theater System) speakers. Sound with loud noise If you watch a video from a plugged in USB flash drive or connected computer, the sound from your Home Theater System might be distorted. This noise is heard when the audio or video file has DTS sound but the Home Theater System has no DTS sound processing. You can fix this by setting the Digital out format of the TV to Stereo. Press  (Home) > Settings > All settings > Sound > Advanced > Digital out format 19.7 HDMI - UHD HDMI • Note that HDCP (High-bandwidth Digital Content Protection) support can delay the time taken for a TV to display content from an HDMI device. • If the TV does not recognize the HDMI device and no picture is displayed, switch the source from one device to another and back again. • This is an Ultra HD TV. Some older devices - connected with HDMI - do not recognize an Ultra HD TV electronically and might not work correctly or show distorted picture or sound. To avoid the malfunctioning of such a device, you can set the signal quality to a level the device can handle. If the device is not using Ultra HD signals, you can switch off Ultra HD for this HDMI connection. If the picture and sound of a device connected with HDMI is distorted, check if a different HDMI Ultra HD setting can solve this problem. In Help > User manual, press the color key  Keywords and look up HDMI Ultra HD. • If there are intermittent sound disruptions, make sure that output settings from the HDMI device are correct. HDMI EasyLink does not work • Check if your HDMI devices are HDMI-CEC compatible. EasyLink features only work with devices that are HDMI-CEC compatible. No volume icon shown • When an HDMI-CEC audio device is connected and you use the TV Remote Control to adjust the volume level from the device, this behavior is normal. 19.8 USB Photos, videos and music from a USB device do not show • Check if the USB storage device is set to Mass Storage Class compliant, as described in the storage device's documentation. • Check if the USB storage device is compatible with the TV. • Check if the audio and picture file formats are supported by the TV. For more information, in Help, press the color key  Keywords and look up Multimedia. Choppy playback of USB files • The transfer performance of the USB storage device may limit the data transfer rate to the TV which causes poor playback. 19.9 Wi-Fi and Internet Wi-Fi network not found or distorted • Check if the firewalls in your network allow access to the TV's wireless connection. • If the wireless network does not work properly in your home, try the wired network installation. Internet does not work • If the connection to the router is OK, check the router connection to the Internet. The PC and Internet connection are slow • Look in your wireless router's user manual for information on indoor range, transfer rate and other factors of signal quality. • Use a high-speed (broadband) Internet connection for your router. DHCP • If the connection fails, you can check the DHCP (Dynamic Host Configuration Protocol) setting of the router. DHCP should be switched on. 42
Page: 43
19.10 Wrong Menu Language Change the language back to your language. 1 - Press  (Home), select Settings > Region and language > Languages > Menu language and press OK. 2 - Select the language you want and press OK. 3 - Press  BACK to close the menu. 43
Page: 44
20 Safety and Care 20.1 Safety Important Read and understand all safety instructions before you use the TV. If damage is caused by failure to follow instructions, the warranty does not apply. Risk of Electric Shock or Fire • Never expose the TV to rain or water. Never place liquid containers, such as vases, near the TV. If liquids are split on or into the TV, disconnect the TV from the power outlet immediately. Contact Philips TV Consumer Care to have the TV checked before use. • Never expose the TV, remote control or batteries to excessive heat. Never place them near burning candles, naked flames or other heat sources, including direct sunlight. • Never insert objects into the ventilation slots or other openings on the TV. • Never place heavy objects on the power cord. • Avoid force coming onto power plugs. Loose power plugs can cause arcing or fire. Ensure that no strain is exerted on the power cord when you swivel the TV screen. • To disconnect the TV from the main power, the power plug of the TV must be disconnected. When disconnecting the power, always pull the power plug, never the cord. Ensure that you have full access to the power plug, power cord and outlet socket at all times. Risk of Damage to the TV • Two people are required to lift and carry a TV that weighs more than 25 kg or 55 lbs. • If you mount the TV on a stand, only use the supplied stand. Secure the stand to the TV tightly. Place the TV on a flat, level surface that can support the weight of the TV and the stand. • When wall mounted, ensure that the wall mount can safely bear the weight of the TV set. TP Vision bears no responsibility for improper wall mounting that results in accident, injury or damage. • Parts of this product are made of glass. Handle with care to avoid injury or damage. • Before you connect the TV to the power outlet, ensure that the power voltage matches the value printed on the back of the TV. Never connect the TV to the power outlet if the voltage is different. Risk of Injury to Children Follow these precautions to prevent the TV from toppling over and causing injury to children: • Never place the TV on a surface covered by a cloth or other material that can be pulled away. • Ensure that no part of the TV hangs over the edge of the mounting surface. • Never place the TV on tall furniture, such as a bookcase, without anchoring both the furniture and TV to the wall or a suitable support. • Teach children about the dangers of climbing on furniture to reach the TV. Risk of swallowing batteries! The remote control may contain coin-type batteries which can easily be swallowed by small children. Keep these batteries out of reach of children at all times. Stability Hazards A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions, such as: • ALWAYS use cabinets or stands or mounting methods recommended by the manufacturer of the television. • ALWAYS use furniture that can safely support the television. • ALWAYS educate children about the dangers of climbing on furniture to reach the television or its controls. • ALWAYS route cords and cables connected to the television so that they cannot be tripped over, pulled or grabbed. • NEVER place a television in an unstable location. • NEVER place the television on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and television to a suitable support. • NEVER place the television on cloth or other materials that may be located between the television and supporting furniture. • NEVER place items that might tempt children to climb, such as toys and remote controls, on the top of the television or furniture on which the television is placed. If the existing television is going to be retained and relocated, the same considerations as above should be applied. 44
Page: 45
Risk of Swallowing Batteries The remote control may contain coin-type batteries which can easily be swallowed by small children. Keep these batteries out of reach of children at all times. Risk of Overheating Never install the TV in a confined space. Always leave a space of at least 10 cm or 4 inches around the TV for ventilation. Ensure curtains or other objects never cover the ventilation slots on the TV. Lightning Storms Disconnect the TV from the power outlet and antenna before lightning storms. During lightning storms, never touch any part of the TV, power cord or antenna cable. Risk of Hearing Damage Avoid using earphones or headphones at high volumes or for prolonged periods of time. Low Temperatures If the TV is transported in temperatures below 5°C or 41°F, unpack the TV and wait until the TV temperature reaches room temperature before connecting the TV to the power outlet. Humidity In rare occasions, depending on temperature and humidity, minor condensation can occur on the inside of the TV glass front (on some models). To prevent this, do not expose the TV to direct sunlight, heat or extreme humidity. If condensation occurs, it will disappear spontaneously while the TV is playing for a few hours. The condensation moisture will not harm the TV or cause malfunction. 20.2 Screen Care Clean • Never touch, push, rub or strike the screen with any object. • Unplug the TV before cleaning. • Clean the TV and frame with a soft damp cloth and wipe gently. Never use substances such as alcohol, chemicals, or household cleaners on the TV. • To avoid deformations and color fading, wipe off water drops as quickly as possible. • Avoid stationary images as much as possible. Stationary images are images that remain on screen for extended periods of time. Stationary images include on screen menus, black bars, time displays, etc. If you must use stationary images, reduce screen contrast and brightness to avoid screen damage. 45
Page: 46
21 Terms of Use 2019 © TP Vision Europe B.V. All rights reserved. This product was brought to the market by TP Vision Europe B.V. or one of its affiliates, hereinafter referred to as TP Vision, which is the manufacturer of the product. TP Vision is the warranter in relation to the TV with which this booklet was packaged. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips N.V or their respective owners. TP Vision reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. The written material packaged with the TV and the manual stored in the memory of the TV or downloaded from the Philips website www.philips.com/TVsupport are believed to be adequate for the intended use of the system. The material in this manual is believed adequate for the intended use of the system. If the product, or its individual modules or procedures, are used for purposes other than those specified herein, confirmation of their validity and suitability must be obtained. TP Vision warrants that the material itself does not infringe any United States patents. No further warranty is expressed or implied. TP Vision cannot be held responsible neither for any errors in the content of this document nor for any problems as a result of the content in this document. Errors reported to Philips will be adapted and published on the Philips support website as soon as possible. Terms of warranty - Risk of injury, damage to TV or void of warranty! Never attempt to repair the TV yourself. Use the TV and accessories only as intended by the manufacturer. The caution sign printed on the back of the TV indicates risk of electric shock. Never remove the TV cover. Always contact Philips TV Customer Care for service or repairs. Find the telephone number in the printed documentation that came with the TV. Or consult our website www.philips.com/TVsupport and select your country if needed. Any operation expressly prohibited in this manual, or any adjustments and assembly procedures not recommended or authorized in this manual, shall void the warranty. Pixel characteristics This TV product has a high number of color pixels. Although it has effective pixels of 99.999% or more, black dots or bright points of light (red, green or blue) may appear constantly on the screen. This is a structural property of the display (within common industry standards) and is not a malfunction. TP Vision is committed to developing, producing and marketing products that cause no adverse health effects. TP Vision confirms that, as long as its products are handled properly for their intended use, they are safe to use according to scientific evidence available today. TP Vision plays an active role in the development of safety standards, enabling TP Vision to anticipate further developments in standardization for early integration in its products. 46
Page: 47
22 Copyrights 22.1 HDMI The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries. 22.2 Dolby Audio Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license from Dolby Laboratories. Confidential unpublished works. Copyright © 1992–2015 Dolby Laboratories. All rights reserved. 22.3 Dolby Vision and Dolby Atmos Dolby, Dolby Vision, Dolby Atmos, and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license from Dolby Laboratories. Confidential unpublished works. Copyright © 2012–2018 Dolby Laboratories. All rights reserved. 22.4 DTS-HD (italics) For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, DTS and the Symbol together, DTS-HD, and the DTS-HD logo are registered trademarks and/or trademarks of DTS, Inc. in the United States and/or other countries. © DTS, Inc. All Rights Reserved. 22.5 Wi-Fi Alliance Wi-Fi®, the Wi-Fi CERTIFIED logo, the Wi-Fi logo are registered trademarks of the Wi-Fi Alliance. 22.6 Other Trademarks All other registered and unregistered trademarks are the property of their respective owners. 47
Page: 48
23 Open Source 23.1 Open Source Software This television contains open source software. TP Vision Europe B.V. hereby offers to deliver, upon request, a copy of the complete corresponding source code for the copyrighted open source software packages used in this product for which such offer is requested by the respective licenses. This offer is valid up to three years after product purchase to anyone in receipt of this information. To obtain the source code, write in English to . . . open.source@tpv-tech.com 23.2 Open Source License About Open Source License README for the source code of the parts of TP Vision Netherlands B.V. TV software that fall under open source licenses. This is a document describing the distribution of the source code used on the TP Vision Netherlands B.V. TV, which fall either under the GNU General Public License (the GPL), or the GNU Lesser General Public License (the LGPL), or any other open source license. Instructions to obtain copies of this software can be found in the Directions for Use. TP Vision Netherlands B.V. MAKES NO WARRANTIES WHATSOEVER, EITHER EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, REGARDING THIS SOFTWARE. TP Vision Netherlands B.V. offers no support for this software. The preceding does not affect your warranties and statutory rights regarding any TP Vision Netherlands B.V. product(s) you purchased. It only applies to this source code made available to you. Open Source bash (3.2.48) Bash is the shell, or command language interpreter, that will appear in the GNU operating system. Bash is an sh-compatible shell that incorporates useful features from the Korn shell (ksh) and C shell (csh). It is intended to conform to the IEEE POSIX P1003.2/ISO 9945.2 Shell and Tools standard. It offers functional improvements over sh for both programming and interactive use. In addition, most sh scripts can be run by Bash without modification. Source: http://www.gnu.org/software/bash/ c-ares (1.10.0) c-ares is a C library that performs DNS requests and name resolves asynchronously. Source: http://c-ares.haxx.se/ coreutils (6.9) The GNU Core Utilities are the basic file, shell and text manipulation utilities of the GNU operating system. These are the core utilities which are expected to exist on every operating system. Source: http://www.gnu.org/software/coreutils/ e2fsprogs (2.12.2) e2fsprogs provides the filesystem utilities for use with the ext2 filesystem, it also supports the ext3 and ext4 filesystems. This piece of software is made available under the terms and conditions of the e2fsprogs license, which can be found below. Source: http://e2fsprogs.sourceforge.net/ Expat (2.01) xml paser; Expat is an XML parser library written in C. It is a stream-oriented parser in which an application registers handlers for things the parser might find in the XML document (like start tags). An introductory article on using. This piece of software is made available under the terms and conditions of the Expat license, which can be found below. Source: http://expat.sourceforge.net/ DFB (4.2.31) It is a software library for GNU/Linux/UNIX based operating system with a small memory footprint that provides graphics acceleration, input device handling and abstraction layer, and integrated windowing system with support for translucent windows and multiple display layers on top of the Linux framebuffer without requiring any kernel modifications Source: http://sourceforge.net/projects/jointspace/fil es/remote_applications_SDK/remote_spplications_S DK_v1.3.1/DirectFB141_source_1.3.1.7z/download SAWMAN SaWMan, the Shared application and Window Manager, is a new window manager module for use with DirectFB. Source: http://www.directfb.org/index.php?path=Mai n%2FDownloads&page=1 findutils (4.2.31) The GNU Find Utilities are the basic directory 48
Page: 49
searching utilities of the GNU operating system. These programs are typically used in conjunction with other programs to provide modular and powerful directory search and file locating capabilities to other commands. Source: http://www.gnu.org/software/findutils/ Freetype (2.4.3) FreeType is a software font engine that is designed to be small, efficient, highly customizable, and portable while capable of producing high-quality output (glyph images). Source: http://freetype.sourceforge.net fuse (2.8.4) Fuse is a simple interface for userspace programs to export a virtual filesystem to the linux kernel. This piece of software is made available under the terms and conditions of the fuse license, which can be found below. Source: http://fuse.sourceforge.net/ gawk (3.1.5) If you are like many computer users, you would frequently like to make changes in various text files wherever certain patterns appear, or extract data from parts of certain lines while discarding the rest. To write a program to do this in a language such as C or Pascal is a time-consuming inconvenience that may take many lines of code. The job is easy with awk, especially the GNU implementation: gawk. Source: http://www.gnu.org/software/gawk/ glibc (2.12.2) Any Unix-like operating system needs a C library: the library which defines the “system calls” and other basic facilities such as open, malloc, printf, exit...The GNU C library is used as the C library in the GNU system and most systems with the Linux kernel This piece of software is made available under the terms and conditions of the glibc license, which can be found below. Source: http://www.gnu.org/software/libc/ grep (2.5.1a) The grep command searches one or more input files for lines containing a match to a specified pattern. By default, grep prints the matching lines. Source: http://www.gnu.org/software/grep/ gzip (1.3.12) GNU Gzip is a popular data compression program originally written by Jean-loup Gailly for the GNU project. Mark Adler wrote the decompression part. Source: http://www.gnu.org/software/gzip/ inetutils (1.4.2) Inetutils is a collection of common network programs. Source: http://www.gnu.org/software/inetutils/ iptables (1.4.15) For Cross connection. Source: http://www.netfilter.org/projects/iptables/ iputils (s20101006) The iputils package is set of small useful utilities for Linux networking. It was originally maintained by Alexey Kuznetsov. Source: http://www.skbuff.net/iputils/ Libcurl (7.30.0) HTTP client;libcurl is a free and easy-to-use client- side URL transfer library, supporting FTP, FTPS, HTTP, HTTPS, SCP, SFTP, TFTP, TELNET, DICT, LDAP, LDAPS, FILE, IMAP, SMTP, POP3 and RTSP. libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP form based upload, proxies, cookies, user+password authentication (Basic, Digest, NTLM, Negotiate, Kerberos4), file transfer resume, http proxy tunneling and more! This piece of software is made available under the terms and conditions of the Libcurl license, which can be found below. Source: http://curl.haxx.se/ libiconv (1.11.1) This library provides an iconv() implementation, for use on systems which don't have one, or whose implementation cannot convert from/to Unicode. . This piece of software is made available under the terms and conditions of the libiconv license, which can be found below. Source: http://ftp.gnu.org/pub/gnu/libiconv libmtp (0.3.6) libmtp is an Initiator implementation of the Media Transfer Protocol (MTP) in the form of a library suitable primarily for POSIX compliant operating systems. We implement MTP Basic, the stuff proposed for standardization. Source: http://libmtp.sourceforge.net/ libjpg (6b) This library is used to perform JPEG decoding tasks. This piece of software is made available under the terms and conditions of the libjpg license, which can be found below. Source: http://www.ijg.org/ libusb This is the home of libusb, a library that gives user level applications uniform access to USB devices across many different operating systems. libusb is an open source project licensed under the GNU Lesser General Public License version 2.1. Many participants in the libusb community have helped and continue to help with ideas, implementation, support and improvements for libusb. This piece of software is made available under the 49
Page: 50
terms and conditions of the libusb license, which can be found below. Source: http://libusb.wiki.sourceforge.net http://www.libusb.org/ libusb-compat Library to enable user space application programs to communicate with USB devices. This piece of software is made available under the terms and conditions of the libusb-compat license, which can be found below. Source: http://libusb.wiki.sourceforge.net/LibusbCompat0.1 libpng (1.2.43) libpng -THE reference library for reading, displaying, writing and examining png Image Network Graphics. This piece of software is made available under the terms and conditions of the libpng license, which can be found below. Source: http://sourceforge.net/projects/libpng/files/ Libxml2 (2.7.8) The "libxml2" library is used in AstroTV as a support for the execution of NCL application. This library was developed for the GNOME software suite and is available under a "MIT" license. Source: http://www.xmlsoft.org Linux Kernel (3.1) The Linux kernel is an operating system kernel used by the Linux family of Unix-like operating systems. This piece of software is made available under the terms and conditions of the Linux Kernel license, which can be found below. Source: http://www.kernel.org Linux Fusion (8.7.0) Source: GNU liveMedia (2011.06.12) c++ runtime library for RTSP requirement Source: www.live555.com lvm2 (2.02.89) Userspace toolset that provide logical volume management facilities on linux. This piece of software is made available under the terms and conditions of the lvm2 license, which can be found below. Source: ftp://sources.redhat.com/pub/lvm2/releases/ module-init-tools (3.12) Provides developer documentation for the utilities used by Linux systems to load and manage kernel modules (commonly referred to as "drivers"). Source: https://modules.wiki.kernel.org/index.php/M ain_Page mtd-utils The aim of the system is to make it simple to provide a driver for new hardware, by providing a generic interface between the hardware drivers and the upper layers of the system. Hardware drivers need to know nothing about the storage formats used, such as FTL, FFS2, etc., but will only need to provide simple routines for read, write and erase. Presentation of the device's contents to the user in an appropriate form will be handled by the upper layers of the system. This piece of software is made available under the terms and conditions of the mtd-utils license, which can be found below. Source: http://www.linux- mtd.infradead.org/index.html ncurses (5.7) The ncurses (new curses) library is a free software emulation of curses in System V Release 4.0 (SVr4), and more. It uses terminfo format, supports pads and color and multiple highlights and forms characters and function-key mapping, and has all the other SVr4-curses enhancements over BSD curses. SVr4 curses is better known today as X/Open Curses. Source: http://www.gnu.org/software/ncurses/ net-tools (1.6) The Net-tools?package is a collection of programs for controlling the network subsystem of the Linux kernel. Source: http://www.linuxfromscratch.org/blfs/view/6. 3/basicnet/net-tools.html NTFS-3G Read/Write Driver (2010.5.22) NTFS-3G is an open source cross-platform implementation of the Microsoft Windows NTFS file system with read-write support. NTFS-3G often uses the FUSE file system interface, so it can run unmodified on many different operating systems. It is runnable on Linux, FreeBSD, NetBSD, OpenSolaris, BeOS, QNX, WinCE, Nucleus, VxWorks, Haiku,MorphOS, and Mac OS X It is licensed under either the GNU General Public License or a proprietary license. It is a partial fork of ntfsprogs and is under active maintenance and development. This piece of software is made available under the terms and conditions of the NTFS-3G Read/Write Driver license, which can be found below. Source: http://www.tuxera.com openssl (1.0.1j) OpenSSL is an open source implementation of the SSL and TLS protocols. The core library (written in the C programming language) implements the basic cryptographic functions and provides various utility functions. Wrappers allowing the use of the OpenSSL library in a variety of computer languages are available. Source: http://www.openssl.org/ procps (ps, top) (3.2.8) 50

Question & answers

Have a question about the Philips 55PUN6754 but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Philips 55PUN6754. Please make sure that you describe your difficulty with the Philips 55PUN6754 as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.

Ask a question about the Philips 55PUN6754

Name
Email
Reaction

View a manual of the Philips 55PUN6754 below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Philips
  • Product: Televisions
  • Model/name: 55PUN6754
  • Filetype: PDF
  • Available languages: English, Croatian