Perfectpro Worktube manual

View a manual of the Perfectpro Worktube below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Perfectpro
  • Product: Radio
  • Model/name: Worktube
  • Filetype: PDF
  • Available languages: Dutch, English, German, French

Table of Contents

Page: 1
CONTENTS
CONTENTS ................................................................................................................................................ 1
IMPORTANT SAFETY INSTRUCTIONS ................................................................................................................................................ 2
CONTROLS ................................................................................................................................................ 3
POWER SUPPLY ................................................................................................................................................ 5
GENERAL FUNCTIONS ................................................................................................................................................ 8
USING THE RADIO FOR THE FIRST TIME ................................................................................................................................. 8
DAB MODE (DAB – DAB+) ................................................................................................................................................ 9
FM MODE ................................................................................................................................................ 12
PRESET STATIONS ................................................................................................................................................ 14
AUX-IN MODE ................................................................................................................................................ 15
MANUALLY SETTING CLOCK ................................................................................................................................................ 15
SETTING THE ALARM ................................................................................................................................................ 16
TONE ................................................................................................................................................ 17
LANGUAGE SETTING ................................................................................................................................................ 18
SOFTWARE VERSION ................................................................................................................................................ 18
SYSTEM RESET ................................................................................................................................................ 19
KEY LOCK ................................................................................................................................................ 20
BACKLIGHT ................................................................................................................................................ 20
WARRANTY ................................................................................................................................................ 21
INFORMATION ................................................................................................................................................ 22
WARNING ! WARRANTY BECOMES VOID ONCE THE DEVICE CABINET HAS BEEN OPENED OR ANY MODIFICATIONS OR
ALTERATIONS TO THE ORIGINAL DEVICE HAVE BEEN MADE
1 2
GB
GB
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Clean only with dry cloth.
6. Do not block any ventilation openings. Install in accordance with the instructions.
7. Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that
produce heat.
8. Only use attachments/accessories specified by the manufacturer.
9. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is
used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
10. Unplug this apparatus during lightning storms or when unused for long periods of time.
11. Refer all servicing to qualified service personnel. Servicing is required if the apparatus has been damaged in any, such as
power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
12. To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
13. Do not remove the cover; there are no user-serviceable parts inside.
14. No naked flame sources shall be placed on the apparatus.
15. For outdoors use, to avoid electric shock, use battery only during a raining day or the weather is wet. To prevent electric shock,
if the radio has been exposed to rain or water, the power supply cord and plug must be completely dried before plugging into the
mains socket outlet.
16. The power plug should be close to the apparatus, and easy to be approached that during emergency, to disconnect the power
from the apparatus, just unplug the power plug from the AC power slot.
17. The marking information is located at the side of the apparatus.
18. This apparatus is provided with protection against splashing water (IP45).
19. In case of malfunction due to electrostatic discharge or fast transient (burst), remove and reconnect the power supply.
20. The apparatus must be used in a moderate climate.
21. Use only the AC/DC adaptor which is provided by the manufacturer:
ATL model : DCL25AF-120200
Input : AC 110-240V 50/60Hz
Output : 12V DC 2A
22. To prevent possible hearing damage, do not listen at high volume levels for long period or put your ears too close to the speaker.
23. Under the environment with Conduct Immunity disturbance / Radiated Immunity, the sample may malfunction. It will
automatically recover to normal when the Conducted Immunity disturbance / Radiated Immunity stopped.
Page: 2
3 4
CONTROLS
Top View
1. Antenna
2. Speaker
Front View
3. LCD Display
4. Volume Down
5. Tuning Down
6. Menu-Preset
7. On/Off
8. Volume Up
9. Tuning Up
10. Tone /Select-Info
11. Lock/Source
Bottom View
12. Rubber Foot
13. Battery Door
14. Battery Charger Switch
Side Views
15. Jack Rubber Cover
16. Aux-in
17. DC Adaptor In
GB
GB
1
2
3
4
6
5
7
8
10
9
11
14
13
12
16
15 17
Page: 3
5 6
GB
GB
POWER SUPPLY
AC operation
1. Before plugging the AC/DC adaptor into the AC socket, make sure the voltage is correct and the Battery charger switch is set
correctly: ALKALINE OFF for when using no batteries or Alkaline batteries / NiHM ON for when using NiMH rechargeable
batteries.
2. If you use Alkaline batteries in the radio and the Battery charger switch is on ALKALINE OFF, the batteries will be disconnected
automatically when using AC power supply.
3. If you use rechargeable NiMH batteries in the radio and the Battery charger switch is on NiMH ON, the NiMH batteries will be
charged automatically when using AC power supply.
4. Never use the AC/DC adaptor in rainy or moist conditions to prevent short circuit or moist from entering the radio. Under those
conditions only use battery power and keep the rubber cover closed.
Note:
In order to disconnect the unit from the AC mains completely, the AC/DC adaptor should be removed from the mains socket
completely and it shall remain readily operable and should not be obstructed during intended use.
In case of malfunction due to electrostatic discharge or fast transient (burst), remove the AC adaptor from power supply and remove
the batteries then reinstall the batteries and reconnect the power supply.
Battery operation
1. To open the battery compartment, first remove the rubber foot at the bottom of the apparatus by turning it in counter clockwise
direction.
2. Loosen the screw of the door by unscrewing it in anti-clockwise direction.
3. Observe correct polarity as indicated on the unit (+ and -). Insert Alkaline batteries (6 x 1,5V type IEC LR6 / AM3 / Size AA) or
NiMH rechargeable batteries (6 x 1,2V PerfectPro Rechargeable Accu, Size AA / HR6 / 2500mAh) with the correct polarity into
the compartment.
4. Close the battery door and make sure the screw is fastened.
5. Set the Battery charger switch in the battery compartment according to the battery type to be used (ALKALINE OFF or NiMH
ON).
6. When you choose to use NiMH batteries, switch the Battery charger switch to NiMH ON. The radio will charge the batteries
when it is connected to AC power. When the battery is being charged, the battery symbol on the LCD display will animate. The
charging and animation will stop automatically when the batteries are full.
7. When you choose to use Alkaline batteries, switch the Battery charger switch to ALKALINE OFF. Alkaline battery will not be
charged.
8. Close the rubber foot well to prevent moist or dust from entering the compartment by turning it in clockwise direction onto the
unit.
9. If the unit is not to be used for any extended period of time, it is recommended that the batteries are removed from the radio.
The approximate power level of the batteries is displayed on the LCD display of the radio by the battery symbol (4 levels in total).
When the power level is very low the indication “Batt. Low!” appears and the battery symbol flashes on the display. The batteries
should then be recharged or replaced soon to continue normal operation of the radio.
Warning:
Danger of explosion if a battery is incorrectly replaced. Replace only with the same or equivalent type.
Always make sure the Battery charger switch is set to the correct position.
An Alkaline battery is not rechargeable. Never attempt charging Alkaline batteries.
Do not mix up different battery types.
Do not mix up charged and uncharged batteries.
Do not expose the batteries to excessive heat such as sunshine, fire or the like.
Batteries should not be disposed of by incineration and with household waste. Disposable batteries should be taken to a suitable
recycling centre if possible.
Page: 4
7 8
GB
GB
IMPORTANT INFORMATION ON CHARGING AND USING RECHARGEABLE BATTERIES
1. Recharge the batteries in any case at least every 2 months.
2. Make sure the Battery charger switch next to the battery compartment is set to the “CHARGE / NiMH ON” position.
3. Put the batteries in the compartment whilst paying attention to the correct polarity of the batteries (+ and -).
4. First use: Charge new batteries in one continuous, uninterrupted, charge until they are full. This first charge may take longer
than normal. For longer battery life it is advised to always recharge in one continuous, uninterrupted charge until batteries are
full and do not recharge again whilst the batteries are still full.
5. New batteries will only reach their full capacity after some time of use (several charge – discharge cycles).
6. Leave the complete group of batteries in place inside the radio and do not use these batteries or a few of them for other
purposes. This will result in a mix of (fully) charged and (partly) empty batteries. This can seriously damage the batteries and
radio when recharged.
7. It is advised to only charge batteries at room temperatures between 5 degrees C – 35 degrees C. In lower or higher 		
temperatures full charge cannot be achieved.
8. Depending on the capacity of the batteries, charging from “empty” to “full” can take several hours.
9. Do not charge batteries when the radio is hot or exposed to heat or heat sources.
10. It is advised to clean the metal contacts of the batteries and of the charger inside the radio e.g. with a contact-spray from time to
time.
11. Do not use a mix of old and new rechargeable batteries.
12. Do not use a mix of rechargeable and non-rechargeable batteries.
13. Do not use a mix of full and empty rechargeable batteries.
14. Do not use batteries that have a different mAh capacity.
15. Do not use damaged, deformed or leaking batteries.
16. Battery level indication is an approximate indication only and can vary with battery type used.
17. Batteries can become hot during charging.
18. In cold conditions the capacity of batteries will be much lower than when used at normal room temperature
19. Batteries (even when supplied with the radio), as being consumables, do not fall under the warranty conditions of the radio.
20. It is advised to use PerfectPro rechargeable batteries as the radio and its charger were developed for use with these batteries.
GENERAL FUNCTIONS
1. Switching on and off
Press the On/Off button to turn the radio on or in standby.
2. Switching among DAB / FM / AUX-IN modes
Press the SOURCE button to switch between modes.
3. Tuning the Radio
Tune the radio using the TUNING ◄◄ and ►► buttons.
4. Adjusting the Volume
Adjust the volume with the VOLUME + and - buttons.
5. Adjusting the Tone
Press the TONE button and adjust the Bass and Treble with the VOLUME + and - buttons.
6. Using the AUX-IN feature
Connect the audio output of an external audio device to the Ø3.5mm AUX-IN socket and play music from the external device.
USING THE RADIO FOR THE FIRST TIME
1. Insert batteries and place the radio on a flat surface.
2. Plug the AC/DC power adaptor into the AC socket if desired.
3. Carefully extend the antenna located at the back of the radio. Adjust the antenna so it is vertically extending above the radio.
4. The radio will start up and the display will show “WELCOME” for a few seconds. Then the radio will automatically perform an
auto scan of the Band III DAB channels and the FM band. The display will show “Scanning” in DAB and “Auto” in FM.
5. When the scan is completed, the 10 strongest FM stations will be stored as presets and the available DAB stations will be in the
list of stations. The radio will switch to standby with the updated clock and date showing on the display.
6. If no signals are found, the clock will not be updated. It may be necessary to relocate the radio to a position with better reception.
Page: 5
9 10
GB
GB
DAB MODE (DAB – DAB+)
Operating the radio – DAB
1. Carefully extend the antenna. Press the On/Off button to switch on the radio.
2. Select the DAB waveband by pressing the SOURCE button.
3. The first station in the list of stations found will be played. The display will show the station name. If the radio has been used
before, the last used station will be selected.
4. If no DAB signals are detected, “No stations” will be displayed. It may be necessary to relocate the radio to a position with better
reception. You should then carry out an auto scan to find stations, please refer to the section “Find new stations - DAB”.
Selecting a station – DAB
1. Press the On/Off button to switch on the radio. The display will show “Connecting” and “Playing” for a few seconds.
2. Select the DAB waveband by pressing the Source button.
3. The display will show “Now tuning” for a few seconds.
4. The display shows the name of the radio station currently selected.
5. Press the TUNING ◄◄ or ►► buttons to scroll through the list of available stations.
6. When the desired station name appears on the display, press the SELECT-INFO button to select the station.
Note: If after selecting a station the display shows “No stations”, it may be necessary to relocate the radio to a position with better
reception.
Display modes – DAB
In DAB mode, the radio can display a range of information on the display.
Press the INFO button to cycle through the various modes.
a. Scrolling text Displays scrolling text message e.g. station information, artist/track name, phone-in number, etc.
b. Signal strength Displays the signal strength of radio reception. The clear unfilled rectangle indicates minimum signal
level required for satisfactory reception.
b. Program type Displays the type of station being listened to e.g. Pop, Classic, News, etc.
c. Multiplex name Displays the name of multiplex to which the current station belongs.
d. Channel & frequency Displays the channel number and frequency for the currently tuned DAB station.
e. Bit rate & audio format Displays the digital audio bit rate and audio format.
f. Time & date Displays the current time and date.
Finding new stations – DAB
From time to time, new stations may become available. You may proceed to find new stations as follows:
1. In DAB mode, press the MENU button, “Full Scan” shows on the display.
2. Press the SELECT-INFO button , the radio will perform a scan of the Band III DAB channels. As new stations are found, the
station counter on the right-hand side of the display will increase and new radio stations found will be added to the list stored in
the radio.
Manual Tuning – DAB
Manual tuning is an alternative method of finding new stations. Instead of scanning the entire Band III channels automatically, you
may tune the radio directly to a known DAB channel and store all the multiplex in that channel into the available station list.
1. In DAB mode, press the MENU button and the TUNING ◄◄ or ►► buttons until the LCD display shows “Manual Tune”, then
press the SELECT-INFO button. The display will show DAB channel and Frequency.
2. Press the TUNING ◄◄ or ►► buttons to select the desired Channel or Frequency and then the SELECT-INFO button to tune
to the chosen frequency.
Page: 6
11 12
GB
GB
3. When DAB stations in the tuned channel are found, the display will show the name of the station. Any new radio stations found
will be added to the list stored in the radio.
4. The signal strength display shows the reception of the station. The clear unfilled rectangle indicates minimum signal level
required for satisfactory reception. The signal strength bars will go up or down showing the changing signal strength as you
adjust the antenna or the radio position.
5. Repeat step 1 to 4 for other channels with new stations.
6. Press the MENU button twice to exit manual tuning and return to normal DAB operation.
Dynamic Range Control (DRC) settings – DAB
DRC can make quieter sounds easier to hear when your radio is used in a noisy environment.
1. In DAB mode, press the MENU button and the TUNING ◄◄ or ►► buttons until the display shows “DRC Value”, then press
the SELECT-INFO button .
2. Press the TUNING ◄◄ or ►► buttons to select required DRC setting (default is OFF).
DRC off DRC is switched off, broadcast DRC will be ignored.
DRC high DRC is set as sent by broadcaster.
DRC low DRC level is set to 1/2 that sent by broadcaster.
3. Press the SELECT-INFO the knob to confirm the setting. The display will return to normal radio display.
Note: Not all DAB broadcasts are able to use the DRC function. If the broadcast does not support DRC, then the DRC setting in the
radio will have no effect.
Prune stations – DAB
If you move to a different part of the country, some of the stations that were listed may no longer be available. Also, from time to
time, some DAB services may stop broadcasting, or may change location or frequency. The Prune stations function will delete the
unavailable DAB stations from your station list.
1. In DAB mode, press the MENU button and the TUNING ◄◄ or ►► buttons until the display shows “Prune”, then press the
SELECT-INFO button.
2. Press the TUNING ◄◄ or ►► buttons to select between “Yes” or “No” (default is No). Select “Yes” to enable this function if
required, otherwise, select “No”.
3. Press the SELECT-INFO button to confirm your setting. The display will return to last menu and press MENU to go to the 		
normal radio display.
Note: If you have moved the radio to a different part of the country, you should also carry out a search for new stations (please see
the section “Finding new stations – DAB”).
FM MODE
Operating the radio – FM seek station
1. Press the On/Off button to switch on the radio.
2. Select the FM RADIO waveband by pressing the SOURCE button.
3. If this is the first time to switch to FM mode, the station in preset 1 will be played. If the radio has been used before, the last
listened station will be played.
4. To seek station, press the TUNING ◄◄ or ►► buttons. The scan stops automatically when it finds a station of sufficient
strength.
5. After a few seconds, the display will update and show station name if RDS information is being received.
6. To find other stations, press the TUNING ◄◄ or ►► buttons again.
7. To seek station in an opposite direction, press the TUNING ►►button to scan from low frequency to high frequency or press
the TUNING ◄◄ button to scan from high frequency to low frequency.
8. When the waveband end is reached, the radio will recommence tuning from the opposite waveband end.
Manual tuning – FM
1. Press the On/Off button to switch on the radio.
2. Select the FM band by pressing the SOURCE button.
3. Press the TUNING ◄◄ or ►► buttons to reach the required FM station. The radio will change the frequency in steps of 50
kHz.
4. Adjust the rubber antenna to get the best reception. If the radio is tuned to a station of sufficient signal strength with RDS
information present, the display may change to show the station name.
5. When the waveband end is reached, the radio will recommence tuning from the opposite waveband end.
Page: 7
RDS station service – FM
RDS (Radio Data System) is an information system which inaudible digital information is transmitted in addition to the normal FM
radio program. When the radio is receiving a RDS station and the reception strength is sufficient, the station name will appear in the
display. It may take some time before the RDS information is available.
Calling up RDS information
When you are listening to a FM station with RDS system, repeatedly press the SELECT-INFO button to cycle through the
information. This will only function if the reception level is sufficient and clear.
a. Station name (PS) Displays the name of station being listened to.
b. Radio text (RT) Displays the message about the station being listened to as ticker text.
c. Program type (PTY) Displays the type of station being listened to, e.g. Pop, Classic, News, etc.
d. Frequency Displays the frequency of the station being listened to.
e. Signal level Displays the signal strength.
f. Time & date Displays the current time (24 hour clock) and date.
Scan sensitivity setting – FM
The radio will normally scan all stations from FM broadcasts including the weaker signals. However, you may wish the Auto-scan to
find only those stations with strong enough signals to give good reception.
1. Press the On/Off button to switch on the radio.
2. Select the FM band by pressing the SOURCE button.
3. Press the MENU button, the display shows “Scan”.
4. Press the SELECT-INFO button .
5. Press the TUNING ◄◄ or ►► buttons to select “All” or “Strong” (default is “Strong”). The “Strong” station option will allow the
radio to find strong signals only when scanning.
6. Press the SELECT-INFO button to confirm your setting. The display will return to normal radio display.
PRESET STATIONS
Storing preset stations
There are 20 memory presets in the radio, 10 for DAB and 10 for FM. Presets are remembered by the radio in the event of a power
failure.
1. Press the On/Off button to switch on the radio.
2. Select the desired waveband by pressing the SOURCE button.
3. Tune to the required station.
4. Press (for 1 sec.) the MENU-PRESET button until “Preset” is displayed.
5. Press the TUNING ◄◄ or ►► buttons to select the desired preset number (from P1 to P10).
6. Press (for 1 sec.) the SELECT-INFO button display will show “Saved” to confirm.
7. Repeat steps 3 to 6 for the remaining presets.
8. Stations stored in the preset memories can be over-written by following the above procedure.
Recalling preset stations
1. Press the On/Off button to switch on the radio.
2. Select the desired waveband by pressing the SOURCE button.
3. Press (for 1 sec.) the MENU-PRESET button until “Preset” is displayed. The display will show the station frequency and the
preset number.
4. Press the TUNING ◄◄ or ►► buttons to select the desired preset station, then press SELECT-INFO to confirm.
13 14
GB
GB
Page: 8
7. Press the TUNING ◄◄ or ►► buttons to set the current day.
8. Press the SELECT-INFO button to confirm. The month flashes.
9. Press the TUNING ◄◄ or ►► buttons to set the current month.
10. Press the SELECT-INFO button to confirm. The year flashes.
11. Press the TUNING ◄◄ or ►► buttons to set the current year.
12. Press the SELECT-INFO button to confirm. “Synclock on” flashes.
13. Press the TUNING ◄◄ or ►► buttons to choose either “Synclock on” or “Synclock off”.
14. Press the SELECT-INFO button to confirm. Setting finish.
RDS time synchronisation
“Synclock on” option during the time setting, the time will be automatically updated. Time synchronisation can take several minutes.
The automatic time setting is always activated when the radio is switched from standby to FM broadcasting and receives a RDS
station.
SETTING THE ALARM
The alarm can only be set when the radio is in standby mode. If no buttons are pressed for 5 seconds, the radio will exit the alarm
setup and the setting is cancelled.
1. Press the MENU button for about 3 seconds, and then press the MENU button again until the display shows “ALARM SET”.
2. Press the SELECT-INFO button. The hour digits flash on the display.
3. Press the TUNING ◄◄ or ►► buttons to set the hour
4. Press the SELECT-INFO button to confirm. The minute digits flash.
5. Press the TUNING ◄◄ or ►► buttons to set the minute.
6. Press the SELECT-INFO button to confirm. “ALARM SOURCE” displayed.
7. Press the TUNING ◄◄ or ►► buttons to choose among “FM RADIO”, “BUZZER” and “DAB”.
8. If “FM RADIO” is selected, the last listened station will be played when the alarm rings.
9. “VOL XX” displayed. Press the TUNING ◄◄ or ►► buttons to change the alarm volume.
10. Press the SELECT-INFO button to confirm. Setting finish.
AUX-IN MODE
A 3.5mm stereo Aux-In socket is provided on the side behind the rubber cover, for connecting an external audio device such as MP3
player or CD player (Aux cable not included with this radio).
1. Connect an audio source to the AUX-IN socket.
2. Press the SOURCE button to select AUX input. Display will show “AUX IN”.
3. Play the external player.
4. Adjust the VOLUME of both the radio and the player for comfortable listening.
5. After use, close the rubber cover to prevent moist or dust from entering into the sockets and radio.
Notes: Never use the Aux-In socket in rainy or moist conditions to prevent moist from entering the radio. Keep the rubber cover well
closed under these conditions.
The Auto-Power management function will be activated in AUX mode. If there is no signal* from the Aux-In socket for a period of
over 15 minutes, the WorkTube radio will automatically switch to standby mode. Pressing the On/Off button will wake up the unit.
* Also when the incoming signal from the external device is too low and cannot be detected for a period of over 15 minutes by the
Auto-Power management, the WorkTube radio will switch to standby mode.
To prevent this raise the output level of the external device enough to be detected.
MANUALLY SETTING CLOCK
The clock can only be manually set when the radio is in standby mode. If no buttons are pressed for 5 seconds, the radio will exit the
clock setup and the setting is cancelled.
1. Press the MENU button for about 3 seconds, and the display will show “CLOCK SET”.
2. Press the SELECT-INFO button. The hour digits flash on the display.
3. Press the TUNING ◄◄ or ►► buttons to set the hour
4. Press the SELECT-INFO button to confirm. The minute digits flash.
5. Press the TUNING ◄◄ or ►► buttons to set the minute.
6. Press the SELECT-INFO button to confirm. The day flashes.
15 16
GB
GB
Page: 9
Switching on/ off the alarm
1. To switch the alarm on, press the SELECT-INFO button and hold for 2 seconds. The alarm icon will be shown at the top left
corner.
2. To switch the alarm off, press the SELECT-INFO button again and hold for 2 seconds. The alarm icon will be disappear.
3. To turn off the alarm when it buzzes, simply press the On/Off button.
VOLUME & SOUND
To adjust the volume, simply press the Volume – or + buttons when playing the DAB / FM radio / AUX IN mode.
The level of volume (from 00 to 40 the loudest) will be shown on the LCD Display.
Note: When playing on batteries; if the energy level of the batteries is too low, sound will distort on higher volume.
360 DEGREES SOUND
The unique Neodymium speaker located on top of the radio provides a 360 degrees sound image.
Suggestion: If preferred, place the radio in a corner or close to a wall for additional sound reflection.
TONE
The TONE function enables the user to adjust the lower and higher sound frequencies.
1. Press the On/Off button to switch on the radio.
2. Press the TONE/SELECT-INFO button for about 3 seconds, the display shows “BASS 0”
3. Press Volume – or + buttons to set the desire Bass level.
4. Press the TONE/SELECT-INFO button to confirm, then “TREBLE 0” displayed.
5. Press Volume – or + buttons to set the desire Treble level.
6. Press the TONE/SELECT-INFO button to confirm, and display returned to normal.
LANGUAGE SETTING
The menu of the radio can be configured to various languages.
1. Press the On/Off button to switch on the radio.
2. Press the MENU button, and then the TUNING ◄◄ or ►► buttons until the display shows “System”.
3. Press the SELECT-INFO button; then the TUNING ◄◄ or ►► buttons until the display shows “Language”.
4. Press the SELECT-INFO button; then the TUNING ◄◄ or ►► button until the desired language appears on the display
(default is English).
5. Press the SELECT-INFO button to confirm your choice.
6. The display menu will then change to the chosen language.
SOFTWARE VERSION
The software display cannot be altered and is just for your reference. You can only view the software version in DAB and FM mode.
1. Press the On/Off button to switch on the radio.
2. Press the SOURCE button to select FM or DAB mode.
3. Press the MENU button, and then TUNING ◄◄ or ►► button until the display shows “System”.
4. Press the SELECT-INFO button; then the TUNING ◄◄ or ►► button until the display shows “SW Version”.
5. Press the SELECT-INFO button to view the software version.
6. Press the MENU button to return to the normal radio display.
Note: USB socket next to the battery compartment is for upgrading the software of the device if needed.
Software upgrade should be done by qualified service personnel.
17 18
GB
GB
Page: 10
KEY LOCK
The radio supports Key Lock function in all the Standby, DAB, FM and Aux-in modes.
1. Pressed and hold SOURCE button for about 3 seconds, the LCD will display “Locked”.
2. When keys are locked, the functions of the radio will be temporary disabled until it has been unlocked. During this moment, the
radio would only brighten the backlight for a few seconds and showing “Locked” in display.
3. Pressed and hold the SOURCE button for 3 seconds again, the radio would display “Unlocked”, and the key lock function will be
disabled.
Noted: When the radio is in standby and powered by batteries, some of the buttons were not be able to brighten the radio’s backlight
in order to save energy.
BACKLIGHT
LCD backlight
The menu of the radio can be configured to LCD backlight.
1. Press the On/Off button to turn on the radio.
2. Press the MENU button, and the TUNING ◄◄ or ►► buttons until the display shows “System”.
3. Press the SELECT-INFO button and the then TUNING ◄◄ or ►► buttons until the display shows “LCD backlight”.
4. Press the SELECT-INFO button to enter the LCD backlight adjustment menu.
5. Press the TUNING ◄◄ or ►► buttons to select “on” in order to keep backlight always lightened when the radio is turned on
with AC power supply;
6. Or Press the TUNING ◄◄ or ►► buttons to select “off” (by default) so that the backlight will be lightened for about 10 seconds
whenever a button was pressed with AC power supply.
7. Press the SELECT-INFO button to confirm your choice. The LCD backlight will change upon the latest selection.
Note: The LCD backlight options “on” would only be functional when the radio was powered by AC power supply. In this case, when
the radio was powered by battery power supply, the LCD backlight would be switched to option “off” – 10 seconds lightened when a
button was pressed. When the radio was connected to mains again with AC power supplied, the last user settings would be applied
again.
SYSTEM RESET
If the radio fails to operate correctly, or some digits on the display are missing or incomplete, carry out the following procedure.
1. Press the On/Off button to switch on the radio.
2. Press the MENU button, and then TUNING ◄◄ or ►► button until the display shows “System”.
3. Press the SELECT-INFO button; then the TUNING ◄◄ or ►► button until the display shows “Reset”.
4. Press the SELECT-INFO button; “Reset? <No> Yes” displayed.
5. Press the TUNING ◄◄ or ►► button to select “Yes” if you wish to reset the radio, otherwise, select “No” .
6. Press the SELECT-INFO button to confirm your choice.
7. A full reset will be performed. All presets and the station list will be erased. All settings will be set to the default values. The radio
will start up and the display will show “WELCOME” for a few seconds. Then the radio will automatically perform an auto scan of
the Band III DAB channels and the FM band. The display will show “Scanning” in DAB and “Auto” in FM.
8. When the scan is completed, the 10 strongest FM stations will be stored as presets. The radio will switch to standby with the
updated clock and date showing on the display.
In case of malfunction due to electrostatic discharge; reset the product as above to resume normal operation. If you are not able to
perform the reset operation as above, remove and reconnect all batteries and the power supply.
Under the environment with Conducted Immunity disturbance / Radiated Immunity, the sample may malfunction. It will automatically
recover to normal when the Conducted Immunity disturbance / Radiated Immunity stopped.
19 20
GB
GB
Page: 11
WARRANTY
This radio has a 2 year limited warranty.
WARNING ! Warranty becomes void once the radio cabinet has been opened or any modifications or alterartions to the
radio have been made !
The terms of the warranty of this radio do not cover the following:
- Damage caused by misuse, abuse, neglect, alterations, accidents or unauthorised repair.
- Normal wear and tear.
- Breaking or bending of the antenna.
- Batteries, being consumables, do not fall under the warranty conditions of the radio.
SPECIFICATIONS
Power requirements
Mains AC/DC adaptor Input: 110-240V 50/60Hz AC~, Output: 12V DC 2A
Batteries 6 x 1,5V (Type IEC LR6 / AM3 / size AA)
Rechargeable batteries 6 x 1,2V (Type HR06 / size AA / 2500mAh NiMH rechargeable battery)
Batteries of PerfectPro brand are highly recommended
Frequency coverage FM 87.5 – 108 MHz
DAB 174,928 – 239,200 MHz
Circuit features
Loudspeaker 1 x Ø2 1/4 inch
Output power 1 x 5W
Aux In socket Ø3.5 mm
INFORMATION
Technical data
This device is noise-suppressed according to the applicable EU directives.
This product fulfills the European directives 2006/95/EC, 2005/32/EC and 2004/108/EC.
This device conforms to the safety regulation DIN EN 60065 (VDE 0860) and therefore the international safety
regulation IEC 60065.
Never open the device casing. The manufacturer will not accept any liability for damage resulting from improper
handling.
The type plate is located on the side of the device.
Environmental note
This product has been made from high-quality parts and materials, which can be reused and recycled.
Therefore, do not throw the product away with normal household waste at the end of its life. Take it to a
collection point for recycling electrical and electronic device. This is indicated by this symbol on the product, in
the operating manual and on the packaging.
Please find out about collection points operated by your local authority. Help protect the environmental by
recycling used products.
21 22
GB
GB
Page: 48
Perfectpro B.V.
Everdenberg 9A
4902TT Oosterhout
The Netherlands
www.perfectpro.eu
02/18

Question & answers

There are no questions about the Perfectpro Worktube yet.

Ask a question about the Perfectpro Worktube

Have a question about the Perfectpro Worktube but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Perfectpro Worktube. Please make sure that you describe your difficulty with the Perfectpro Worktube as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.