Panasonic KX-TG6723 manual

View a manual of the Panasonic KX-TG6723 below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Panasonic
  • Product: Dect / voip phone
  • Model/name: KX-TG6723
  • Filetype: PDF
  • Available languages: Dutch, English, German

Table of Contents

Page: 0
Operating Instructions
Model No. KX-TG6721E
KX-TG6722E
KX-TG6723E
KX-TG6724E
Digital Cordless Answering System
Model No. KX-TG6711E
KX-TG6712E
KX-TG6713E
Digital Cordless Phone
Model shown is KX-TG6711.
Before initial use, see “Getting Started”
on page 11.
Thank you for purchasing a Panasonic product.
Please read these operating instructions before using the unit and save them for
future reference.
Please access our online customer survey:
http://panasonic.net/pcc/tel/q
TG67xxE(en)_1226_ver022.pdf 1 2011/12/26 11:45:55
Page: 1
Introduction
Model composition .......................................3
Accessory information ..................................4
General information ......................................6
Important Information
For your safety .............................................7
Important safety instructions ........................8
For best performance ...................................8
Other information .........................................9
Specifications .............................................10
Getting Started
Setting up ...................................................11
Note when setting up .................................12
Controls ......................................................13
Display .......................................................14
Turning the power on/off ............................16
Initial settings .............................................16
Smart function key (Top Key) .....................16
One touch eco mode ..................................17
Wall mounting ............................................18
Making/Answering Calls
Making calls ...............................................19
Answering calls ..........................................19
Useful features during a call .......................20
Key lock ......................................................21
Phonebook
Handset phonebook ...................................22
Copying phonebook entries .......................23
Programming
Programmable settings ..............................24
Special programming .................................28
Registering a unit .......................................31
Caller ID Service
Using Caller ID service ...............................33
Caller list ....................................................33
Answering System
Answering system ......................................35
Turning the answering system on/
off ...............................................................35
Greeting message ......................................35
Listening to messages using the base
unit .............................................................36
Listening to messages using the
handset ......................................................36
Remote operation .......................................37
Answering system settings .........................38
Voice Mail Service
Voice mail service ......................................40
Intercom/Locator
Intercom .....................................................41
Handset locator ..........................................41
Transferring calls, conference calls ............41
Useful Information
Character entry ..........................................42
Error messages ..........................................44
Troubleshooting .........................................45
Conditions of guarantee .............................49
Index
Index...........................................................50
2
Table of Contents
TG67xxE(en)_1226_ver022.pdf 2 2011/12/26 11:45:55
Page: 2
Model composition
Series Model No.
Base unit Handset
Part No. Part No. Quantity
KX-TG6711
series
KX-TG6711 KX-TG6711 KX-TGA672 1
KX-TG6712 KX-TG6711 KX-TGA672 2
KX-TG6713 KX-TG6711 KX-TGA672 3
KX-TG6721
series
KX-TG6721 KX-TG6721 KX-TGA672 1
KX-TG6722 KX-TG6721 KX-TGA672 2
KX-TG6723 KX-TG6721 KX-TGA672 3
KX-TG6724 KX-TG6721 KX-TGA672 4
R The suffix (E) in the following model numbers will be omitted in these instructions:
KX-TG6711E/KX-TG6712E/KX-TG6713E/KX-TG6721E/KX-TG6722E/KX-TG6723E/
KX-TG6724E
Feature differences
Series Answering system
Intercom
Between handsets
KX-TG6711 series – U*1
KX-TG6721 series U U*1
*1 Single handset models: Intercom calls can be made between handsets by purchasing and
registering one or more optional handsets (page 5).
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333 3
Introduction
TG67xxE(en)_1226_ver022.pdf 3 2011/12/26 11:45:55
Page: 3
Accessory information
Supplied accessories
No.
Accessory item/
Part number
Quantity
KX-TG6711
KX-TG6721
KX-TG6712
KX-TG6722
KX-TG6713
KX-TG6723 KX-TG6724
A AC adaptor/
PNLV226EZ
1 2 3 4
B Telephone line cord/
PNJA1037Z (for U.K.)
1 1 1 1
C Rechargeable
batteries*1
2 4 6 8
D Handset cover*2 1 2 3 4
E Charger*3 – 1 2 3
*1 See page 4 for replacement battery information.
*2 The handset cover comes attached to the handset.
*3 PNLC1030ZB: Black, PNLC1030ZM: Metallic grey, PNLC1030ZS: Pearl silver
A B C D E
Additional/replacement accessories
Please contact your nearest Panasonic dealer for sales information.
Accessory item Model number
Rechargeable
batteries
HHR-4MVE*1
Battery type:
– Nickel metal hydride (Ni-MH)
– 2 x AAA (R03) size for each handset
DECT repeater KX-A405
*1 Replacement batteries may have a different capacity from that of the supplied batteries.
4 Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
Introduction
TG67xxE(en)_1226_ver022.pdf 4 2011/12/26 11:45:55
Page: 4
Expanding your phone system
Handset (optional): KX-TGA671E
You can expand your phone system by
registering optional handsets (6 max.) to a
single base unit.
R Optional handsets may be a different
colour from that of the supplied handsets.
Sales and support information
Customer Communications Centre
R For customers within the U.K.: 0844 844 3899
R For customers within Ireland: 01289 8333
R For further support on your product, please visit our website: www.panasonic.co.uk
Direct Sales at Panasonic U.K.
R Order accessory and consumable items for your product with ease and confidence by phoning
our Customer Communications Centre Monday - Thursday 9:00am - 5:30pm, Friday 9:30am -
5:30pm (Excluding public holidays).
R Or go on line through our Internet Accessory ordering application at www.pas-europe.com
R Most major credit and debit cards accepted.
R All enquiries transactions and distribution facilities are provided directly by Panasonic U.K.
R It couldn’t be simpler!
R Also available through our Internet is direct shopping for a wide range of finished products.
Take a browse on our website for further details.
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333 5
Introduction
TG67xxE(en)_1226_ver022.pdf 5 2011/12/26 11:45:55
Page: 5
General information
R This equipment is designed for use on the U.K. and Ireland analogue telephone network.
R In the event of problems, you should contact your equipment supplier in the first instance.
Declaration of Conformity:
R Panasonic System Networks Co., Ltd. declares that this equipment is in compliance with the
essential requirements and other relevant provisions of Radio & Telecommunications Terminal
Equipment (R&TTE) Directive 1999/5/EC.
Declarations of Conformity for the relevant Panasonic products described in this manual are
available for download by visiting:
http://www.doc.panasonic.de
Contact to Authorised Representative:
Panasonic Testing Centre
Panasonic Marketing Europe GmbH
Winsbergring 15, 22525 Hamburg, Germany
For your future reference
We recommend keeping a record of the following information to assist with any repair under
warranty.
Serial No. Date of purchase
(found on the bottom of the base unit)
Name and address of dealer
Attach your purchase receipt here.
6 Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
Introduction
TG67xxE(en)_1226_ver022.pdf 6 2011/12/26 11:45:55
Page: 6
For your safety
To prevent severe injury and loss of life/
property, read this section carefully before
using the product to ensure proper and safe
operation of your product.
WARNING
Power connection
R Use only the power source marked on the
product.
R Do not overload power outlets and
extension cords. This can result in the risk
of fire or electric shock.
R Completely insert the AC adaptor/power
plug into the power outlet. Failure to do so
may cause electric shock and/or excessive
heat resulting in a fire.
R Regularly remove any dust, etc. from the
AC adaptor/power plug by pulling it from
the power outlet, then wiping with a dry
cloth. Accumulated dust may cause an
insulation defect from moisture, etc.
resulting in a fire.
R Unplug the product from power outlets if it
emits smoke, an abnormal smell, or makes
an unusual noise. These conditions can
cause fire or electric shock. Confirm that
smoke has stopped emitting and contact an
authorised service centre.
R Unplug from power outlets and never touch
the inside of the product if its casing has
been broken open.
R Never touch the plug with wet hands.
Danger of electric shock exists.
Installation
R To prevent the risk of fire or electrical
shock, do not expose the product to rain or
any type of moisture.
R Do not place or use this product near
automatically controlled devices such as
automatic doors and fire alarms. Radio
waves emitted from this product may cause
such devices to malfunction resulting in an
accident.
R Do not allow the AC adaptor or telephone
line cord to be excessively pulled, bent or
placed under heavy objects.
Operating safeguards
R Unplug the product from power outlets
before cleaning. Do not use liquid or
aerosol cleaners.
R Do not disassemble the product.
R Do not spill liquids (detergents, cleansers,
etc.) onto the telephone line cord plug, or
allow it to become wet at all. This may
cause a fire. If the telephone line cord plug
becomes wet, immediately pull it from the
telephone wall jack, and do not use.
Medical
R Consult the manufacturer of any personal
medical devices, such as pacemakers or
hearing aids, to determine if they are
adequately shielded from external RF
(radio frequency) energy. (The product
operates in the frequency range of
1.88 GHz to 1.90 GHz, and the RF
transmission power is 250 mW (max.).)
R Do not use the product in health care
facilities if any regulations posted in the
area instruct you not to do so. Hospitals or
health care facilities may be using
equipment that could be sensitive to
external RF energy.
CAUTION
Installation and location
R Never install telephone wiring during an
electrical storm.
R Never install telephone line jacks in wet
locations unless the jack is specifically
designed for wet locations.
R Never touch uninsulated telephone wires or
terminals unless the telephone line has
been disconnected at the network interface.
R Use caution when installing or modifying
telephone lines.
R The AC adaptor is used as the main
disconnect device. Ensure that the AC
outlet is installed near the product and is
easily accessible.
R This product is unable to make calls when:
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333 7
Important Information
TG67xxE(en)_1226_ver022.pdf 7 2011/12/26 11:45:56
Page: 7
– the handset batteries need recharging or
have failed.
– there is a power failure.
– the key lock feature is turned on.
Battery
R We recommend using the batteries noted
on page 4. USE ONLY rechargeable
Ni-MH batteries AAA (R03) size.
R Do not mix old and new batteries.
R Do not open or mutilate the batteries.
Released electrolyte from the batteries is
corrosive and may cause burns or injury to
the eyes or skin. The electrolyte is toxic and
may be harmful if swallowed.
R Exercise care when handling the batteries.
Do not allow conductive materials such as
rings, bracelets, or keys to touch the
batteries, otherwise a short circuit may
cause the batteries and/or the conductive
material to overheat and cause burns.
R Charge the batteries provided with or
identified for use with this product only, in
accordance with the instructions and
limitations specified in this manual.
R Only use a compatible base unit (or
charger) to charge the batteries. Do not
tamper with the base unit (or charger).
Failure to follow these instructions may
cause the batteries to swell or explode.
Important safety
instructions
When using your product, basic safety
precautions should always be followed to
reduce the risk of fire, electric shock, and
injury to persons, including the following:
1. Do not use this product near water for
example, near a bathtub, washbowl,
kitchen sink, or laundry tub, in a wet
basement or near a swimming pool.
2. Avoid using a telephone (other than a
cordless type) during an electrical storm.
There may be a remote risk of electric
shock from lightning.
3. Do not use the telephone to report a gas
leak in the vicinity of the leak.
4. Use only the power cord and batteries
indicated in this manual. Do not dispose of
batteries in a fire. They may explode.
Check with local codes for possible special
disposal instructions.
SAVE THESE INSTRUCTIONS
For best performance
Base unit location/avoiding noise
The base unit and other compatible Panasonic
units use radio waves to communicate with
each other.
R For maximum coverage and noise-free
communications, place your base unit:
– at a convenient, high, and central
location with no obstructions between
the handset and base unit in an indoor
environment.
– away from electronic appliances such as
TVs, radios, personal computers,
wireless devices, or other phones.
– facing away from radio frequency
transmitters, such as external antennas
of mobile phone cell stations. (Avoid
putting the base unit on a bay window or
near a window.)
R Coverage and voice quality depends on the
local environmental conditions.
R If the reception for a base unit location is
not satisfactory, move the base unit to
another location for better reception.
Environment
R Keep the product away from electrical noise
generating devices, such as fluorescent
lamps and motors.
R The product should be kept free from
excessive smoke, dust, high temperature,
and vibration.
R The product should not be exposed to
direct sunlight.
R Do not place heavy objects on top of the
product.
R When you leave the product unused for a
long period of time, unplug the product from
the power outlet.
R The product should be kept away from heat
sources such as radiators, cookers, etc. It
8 Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
Important Information
TG67xxE(en)_1226_ver022.pdf 8 2011/12/26 11:45:56
Page: 8
should not be placed in rooms where the
temperature is less than 0 °C or greater
than 40 °C. Damp basements should also
be avoided.
R The maximum calling distance may be
shortened when the product is used in the
following places: Near obstacles such as
hills, tunnels, underground, near metal
objects such as wire fences, etc.
R Operating the product near electrical
appliances may cause interference. Move
away from the electrical appliances.
Routine care
R Wipe the outer surface of the product
with a soft moist cloth.
R Do not use benzine, thinner, or any
abrasive powder.
Other information
CAUTION: Risk of explosion if battery is
replaced by an incorrect type. Dispose of used
batteries according to the instructions.
Notice for product disposal, transfer,
or return
R This product can store your private/
confidential information. To protect your
privacy/confidentiality, we recommend that
you erase information such as phonebook
or caller list entries from the memory before
you dispose of, transfer, or return the
product.
Information for Users on Collection
and Disposal of Old Equipment and
used Batteries
1 2 3
These symbols (A, B, C) on the products,
packaging, and/or accompanying documents
mean that used electrical and electronic
products and batteries should not be mixed
with general household waste.
For proper treatment, recovery and recycling
of old products and used batteries, please
take them to applicable collection points, in
accordance with your national legislation and
the Directives 2002/96/EC and 2006/66/EC.
By disposing of these products and batteries
correctly, you will help to save valuable
resources and prevent any potential negative
effects on human health and the environment
which could otherwise arise from inappropriate
waste handling.
For more information about collection and
recycling of old products and batteries, please
contact your local municipality, your waste
disposal service or the point of sale where you
purchased the items.
Penalties may be applicable for incorrect
disposal of this waste, in accordance with
national legislation.
For business users in the European
Union
If you wish to discard electrical and electronic
equipment, please contact your dealer or
supplier for further information.
Information on Disposal in other
Countries outside the European Union
These symbols (A, B, C) are only valid in
the European Union. If you wish to discard
these items, please contact your local
authorities or dealer and ask for the correct
method of disposal.
Note for the battery symbol
This symbol (B) might be used in
combination with a chemical symbol (C). In
this case it complies with the requirement set
by the Directive for the chemical involved.
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333 9
Important Information
TG67xxE(en)_1226_ver022.pdf 9 2011/12/26 11:45:56
Page: 9
Specifications
R Standard:
DECT (Digital Enhanced Cordless
Telecommunications),
GAP (Generic Access Profile)
R Frequency range:
1.88 GHz to 1.90 GHz
R RF transmission power:
Approx. 10 mW (average power per
channel)
R Power source:
220–240 V AC, 50/60 Hz
R Power consumption:
Base unit*1:
Standby: Approx. 0.38 W
Maximum: Approx. 2.4 W
Base unit*2:
Standby: Approx. 0.48 W
Maximum: Approx. 2.5 W
Charger:
Standby: Approx. 0.1 W
Maximum: Approx. 1.8 W
R Operating conditions:
0 °C–40 °C, 20 %–80 % relative air
humidity (dry)
*1 KX-TG6711 series: page 3
*2 KX-TG6721 series: page 3
Note:
R Design and specifications are subject to
change without notice.
R The illustrations in these instructions may
vary slightly from the actual product.
10 Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
Important Information
TG67xxE(en)_1226_ver022.pdf 10 2011/12/26 11:45:56
Page: 10
Setting up
Connections
R Use only the supplied Panasonic AC
adaptor PNLV226E.
R When mounting the unit on a wall, see
page 18.
n Base unit
*DSL/ADSL filter (not supplied) is required if
you have DSL/ADSL service.
“Click”
To telephone line
(DSL/ADSL filter*)
Press plug firmly.
To power outlet
Incorrect
Correct
Use only the supplied
telephone line cord.
Hook
n Charger
To power outlet
Hooks
Battery installation
R USE ONLY Ni-MH batteries AAA (R03)
size.
R Do NOT use Alkaline/Manganese/Ni-Cd
batteries.
R Confirm correct polarities ( , ).
Rechargeable Ni-MH ONLY
R When the date and time setting is
displayed, see page 16.
Battery charging
Charge for about 7 hours.
R When the batteries are fully charged,
“Fully charged” is displayed.
Confirm “Charging” is displayed.
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333 11
Getting Started
TG67xxE(en)_1226_ver022.pdf 11 2011/12/26 11:45:56
Page: 11
Note when setting up
Note for connections
R The AC adaptor must remain connected at
all times. (It is normal for the adaptor to feel
warm during use.)
R The AC adaptor should be connected to a
vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight of
the adaptor may cause it to become
disconnected.
During a power failure
The unit will not work during a power failure.
We recommend connecting a corded-type
telephone (without AC adaptor) to the same
telephone line or to the same telephone line
jack using a T-adaptor. Your Panasonic sales
shop can offer you more information about
connection possibilities.
Note for battery installation
R Use the supplied rechargeable batteries.
For replacement, we recommend using the
Panasonic rechargeable batteries noted on
page 4, 8.
R Wipe the battery ends ( , ) with a dry
cloth.
R Avoid touching the battery ends
( , ) or the unit contacts.
Note for battery charging
R It is normal for the handset to feel warm
during charging.
R Clean the charge contacts of the handset,
base unit, and charger with a soft and dry
cloth once a month. Before cleaning the
unit, disconnect from power outlets and any
telephone line cords. Clean more often if
the unit is exposed to grease, dust, or high
humidity.
Battery level
Icon Battery level
High
Medium
Low
Needs charging.
Panasonic Ni-MH battery
performance (supplied batteries)
Operation Operating time
In continuous use 15 hours max.
Not in use (standby) 170 hours max.
Note:
R It is normal for batteries not to reach full
capacity at the initial charge. Maximum
battery performance is reached after a few
complete cycles of charge/discharge (use).
R Actual battery performance depends on
usage and ambient environment.
R Even after the batteries are fully charged,
the handset can be left on the base unit or
charger without any ill effect on the
batteries.
R The battery level may not be displayed
correctly after you replace the batteries. In
this case, place the handset on the base
unit or charger and let it charge for at least
7 hours.
12 Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
Getting Started
TG67xxE(en)_1226_ver022.pdf 12 2011/12/26 11:45:56
Page: 12
Controls
Handset
B C
A
H
I
J
L
E
G
K
D
F
MSmart functionN (Top Key)
Smart function indicator
Secure grip
R Secure grip offers support when you
cradle the handset between your
shoulder and ear.
Speaker
M N (Speakerphone)
M N (Talk)
Dial keypad
Receiver
Display
MR/ECON
R: Recall/Flash
ECO: Eco mode shortcut key
M N (Off/Power)
Microphone
Charge contacts
n Control type
Soft keys
The handset features 3 soft keys. By
pressing a soft key, you can select the
feature shown directly above it on the
display.
Navigator key
– MDN, MCN, MFN, or MEN: Scroll through
various lists and items.
– (Volume: MDN or MCN): Adjust the
receiver or speaker volume while
talking.
– MFN ( : Caller list): View the caller list.
– MEN (T: Redial): View the redial list.
Base unit
n KX-TG6711 series: page 3
B
A
Charge contacts
M N (Locator)
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333 13
Getting Started
TG67xxE(en)_1226_ver022.pdf 13 2011/12/26 11:45:56
Page: 13
n KX-TG6721 series: page 3
A B E
C D
G H
F I
Charge contacts
Speaker
MnN (Stop)
M N (Erase)
Message counter
MjN/MkN (Volume up/down)
M N/M N (Repeat/Skip)
M N (Play)
Message indicator
M N (Locator)
M N (Answer on)
Answer on indicator
Display
Handset display items
Item Meaning
Range status: The more bars
visible, the closer the handset
is to the base unit.
Out of base unit range
Paging, intercom mode
Speakerphone is on.
(page 19)
The line is in use.
R When flashing slowly: The
call is put on hold.
R When flashing rapidly: An
incoming call is now being
received.
Missed call*1 (page 33)
The base unit transmission
power is set to “Low”.
(page 17)
The LCD and key backlight is
off. (page 26)
R When displayed next to the
battery icon: Answering
system is on.*2 (page 35)
R When displayed with a
number:
New messages have been
recorded.*2 (page 36)
“Greeting Only” is
selected as the caller’s
recording time. In this case,
the answering system
answers calls with a greeting
message and caller
messages are not recorded.*2
(page 39)
Battery level
Alarm is on. (page 29)
Equalizer is set. (page 20)
14 Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
Getting Started
TG67xxE(en)_1226_ver022.pdf 14 2011/12/26 11:45:56
Page: 14
Item Meaning
Privacy mode is on.
(page 27)
Ringer volume is off.
(page 26)
Night mode is on. (page 29)
Blocked call*1 (page 30,
33)
New voice mail message
received.*3 (page 40)
Line in
use
Someone is using the line.
IN USE Answering system is being
used by another handset or
the base unit.*2
*1 Caller ID subscribers only
*2 KX-TG6721 series: page 3
*3 Voice mail subscribers only
Base unit display items
n KX-TG6721 series: page 3
Item Meaning
- - “Greeting Only” is
selected as the caller’s
recording time. In this case,
the answering system
answers calls with a greeting
message and caller
messages are not recorded.
(page 39)
Handset soft key icons
Icon Action
Returns to the previous screen or
outside call.
Displays the menu.
Accepts the current selection.
Displays a previously dialled
phone number.
Makes a call. (page 19)
Icon Action
Temporarily turns off the ringer
for incoming calls. (page 20)
Sets 24-hour or 12-hour clock
format. (page 16)
Places a call on hold.
Opens the phonebook.
Allows you to edit phone
numbers. (page 30, 34)
Adds new entry. (page 22, 30)
Displays the character entry
mode for phonebook search.
(page 22)
Turns the key lock feature off.
(page 21)
Stops alarm. (page 29)
Snooze button on the alarm.
(page 29)
Selects a character entry mode.
Selects entries or handsets.
(page 17, 29)
Stops recording or playback.*1
Stores phone numbers.
(page 30, 34)
Inserts a dialling pause.
Erases the selected item or
returns to the outside call.
Allows you to make an intercom
call. (page 41)
Erases a number/character.
Puts the call on mute.
*1 KX-TG6721 series: page 3
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333 15
Getting Started
TG67xxE(en)_1226_ver022.pdf 15 2011/12/26 11:45:56
Page: 15
Handset main menu icons
The following icons are shown when you
press (middle soft key) in standby mode.
Icon Feature
Caller List
Answer System*1
Time Settings
Intercom
Initial Setup
Ringer Setup
Caller Barred*2
*1 KX-TG6721 series: page 3
*2 KX-TG6711 series: page 3
Turning the power on/off
Power on
Press M N for about 1 second.
Power off
Press M N for about 2 seconds.
Initial settings
n Direct command code:
Programmable settings can be accessed by
pressing , # and then the
corresponding code on the dial keypad
(page 24).
Example: Press #101.
n Symbol meaning:
Example: MbN: “Off”
Press MCN or MDN to select the words in
quotations.
Display language
1 #110
2 MbN: Select your desired language. a
3 M N
Date and time
Important:
R When you install the batteries for the first
time, the handset may prompt you to set
date and time. First press , then
proceed to step 2.
1 #101
2 Enter the current date, month, and year.
a
Example: 15 July, 2012
15 07 12
3 Enter the current hour and minute.
Example: 9:30
09 30
R You can select 24-hour or 12-hour
clock format (“AM” or “PM”) by
pressing .
4 a M N
Note:
R The date and time may be incorrect after a
power failure. In this case, set the date and
time again.
Smart function key (Top
Key)
The smart function key (Top Key) is located
on the top of the handset and informs you with
its flashing to allow you to activate the
following features by simply pressing this key.
n When the smart function indicator
flashes rapidly, you can:
– Answer the call (outside call, intercom).
(page 19, 41)
– Stop the alarm sound. (page 29)
– Stop paging. (page 41)
n When the smart function indicator
flashes slowly in standby mode, you can:
– Listen to new messages.*1 (page 37)
16 Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
Getting Started
TG67xxE(en)_1226_ver022.pdf 16 2011/12/26 11:45:56
Page: 16
– View the caller list when there are
missed calls. (page 33)
To activate these features, their Top key
setup must be “On”. (page 17)
*1 KX-TG6721 series: page 3
Using the smart function key
(Top Key)
When the smart function indicator flashes
rapidly/slowly, press MSmart functionN.
R The above features can be activated
depending the situation.
R If you answer a call using the smart
function key, the speakerphone is activated.
R Even if the handset is placed on the base
unit or charger, the feature can be
activated. You can talk or listen to new
messages*1 without lifting up the handset. If
you want to perform further operations, lift
up the handset.
R When the unit has new messages*1 and
missed calls, the unit can be operated to
play the new messages first and then show
the missed calls.
*1 KX-TG6721 series: page 3
Note:
R While key lock is on (page 21), incoming
calls can be answered, but the following
features are disabled even when the smart
function indicator flashes slowly.
– Listen to new messages.*1 (page 37)
– View the caller list when there are
missed calls. (page 33)
*1 KX-TG6721 series: page 3
Setting the smart function key (Top
Key Setup)
The Top key setup for the following features
must be “On”.
– “New Message”*1 (Default: On)
– “Missed Call” (Default: Off)
The settings can be set for each handset.
*1 KX-TG6721 series: page 3
1 #278
2 MbN: Select the desired setting and press
.
R “ ” is displayed next to the selected
features.
R To cancel a selected feature, press
again. “ ” disappears.
3 a M N
Note:
R If the smart function indicator flashes when
the handset is not placed on the base unit
or charger, battery consumption is faster
than usual.
One touch eco mode
The MR/ECON button on the handset enables
you to activate the eco function with one
touch.
By activating eco mode, your unit can reduce
the base unit transmission power by up to
90 % in standby mode.
You can turn on/off one touch eco mode by
just pressing MR/ECON. The default setting is
“Normal”.
– When the one touch eco mode is on: “Low”
is temporarily displayed and is shown
on the handset display instead of .
– When the one touch eco mode is off:
“Normal” is temporarily displayed and
goes off from the handset display.
Note:
R When there is another cordless phone
nearby and it is in use, the base unit
transmission power may not be reduced.
R Activating one touch eco mode reduces the
range of the base unit in standby mode.
R If you set the repeater mode to “On” (page
32):
– One touch eco mode is cancelled.
– “Eco Setup” is not shown in the
display menu (page 26).
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333 17
Getting Started
TG67xxE(en)_1226_ver022.pdf 17 2011/12/26 11:45:56
Page: 17
Wall mounting
Note:
R Make sure that the wall and the fixing
method are strong enough to support the
weight of the unit.
R Drive the screws (not supplied) into the wall.
n Base unit
Hook
Screws
49 mm
n Charger
25 mm
Screws
Hooks
18 Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
Getting Started
TG67xxE(en)_1226_ver022.pdf 18 2011/12/26 11:45:56
Page: 18
Making calls
1 Lift the handset and dial the phone
number.
R To correct a digit, press .
2 Press M N or .
3 When you finish talking, press M N or
place the handset on the base unit or
charger.
Using the speakerphone
1 Dial the phone number and press M N.
R Speak alternately with the other party.
2 When you finish talking, press M N.
Note:
R For best performance, use the
speakerphone in a quiet environment.
R To switch back to the receiver, press M N/
M N.
Adjusting the receiver or speaker
volume
Press MDN or MCN repeatedly while talking.
Making a call using the redial list
The last 10 phone numbers dialled are stored
in the redial list (each 24 digits max.).
1 or MEN (T)
2 MbN: Select the desired phone number.
3 M N
Erasing a number in the redial list
1 or MEN (T)
2 MbN: Select the desired phone number.
a
3 MbN: “Yes” a a M N
Pause (for PBX/long distance service
users)
A pause is sometimes required when making
calls using a PBX or long distance service.
When storing a calling card access number
and/or PIN in the phonebook, a pause is also
needed (page 23).
Example: If you need to dial the line access
number “0” when making outside calls with a
PBX:
1 0 a
2 Dial the phone number. a M N
Note:
R A 3 second pause is inserted each time
is pressed.
Answering calls
When a call is being received, the smart
function indicator flashes rapidly.
1 Lift the handset and press M N or M N
when the unit rings.
R You can also answer the call by
pressing any dial key from 0 to 9,
*, or #. (Any key answer feature)
2 When you finish talking, press M N or
place the handset on the base unit or
charger.
Using the smart function key
When the smart function indicator flashes
rapidly, press MSmart functionN.
R You can answer the call even if the handset
is placed on the base unit or charger
(page 17).
You can finish talking by pressing M N
without lifting up the handset.
Auto talk
You can answer calls simply by lifting the
handset off the base unit or charger. You do
not need to press M N. To turn this feature
on, see page 26.
Adjusting the handset ringer volume
n While the handset is ringing for an
incoming call:
Press MDN or MCN repeatedly to select the
desired volume.
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333 19
Making/Answering Calls
TG67xxE(en)_1226_ver022.pdf 19 2011/12/26 11:45:56
Page: 19
n Programming the volume beforehand:
1 #160
2 MbN: Select the desired volume.
3 a M N
Temporary handset ringer off
While the handset is ringing for a call, you can
turn the ringer off temporarily by pressing
.
Useful features during a
call
Hold
This feature allows you to put an outside call
on hold.
1 Press during an outside call.
2 MbN: “Hold” a
3 To release hold, press M N.
R Another handset user can take the call
by pressing M N.
Note:
R If a call is kept on hold for more than 9
minutes, an alarm tone starts to sound and
the smart function indicator flashes rapidly.
After 1 additional minute on hold, the call is
disconnected.
R If another phone is connected to the same
line, you can also take the call by lifting its
handset.
Mute
While mute is turned on, you can hear the
other party, but the other party cannot hear
you.
1 Press during conversation.
R flashes.
2 To return to the conversation, press
again.
Recall/flash
MR/ECON allows you to use the special
features of your host PBX such as transferring
an extension call, or accessing optional
telephone services.
Note:
R To change the recall/flash time, see
page 27.
For call waiting or Call Waiting
Caller ID service users
To use call waiting or Call Waiting Caller ID,
you must first subscribe with your service
provider/telephone company.
This feature allows you to receive calls while
you are already talking on the phone. If you
receive a call while on the phone, you will hear
a call waiting tone.
If you subscribe to both Caller ID and Call
Waiting with Caller ID services, the 2nd
caller’s information is displayed after you hear
the call waiting tone on the handset.
1 Press MR/ECON to answer the 2nd call.
2 To switch between calls, press MR/ECON.
Note:
R Please contact your service provider/
telephone company for details and
availability of this service in your area.
Handset equalizer
This feature clarifies the voice of the person
you are talking to, producing a more
natural-sounding voice that is easier to hear
and understand.
1 Press while talking.
2 MbN: “Equalizer” a
3 MbN: Select the desired setting.
4 Press to exit.
Note:
R When this feature is turned on, is
displayed while talking.
R Depending on the condition and quality of
your telephone line, this feature may
20 Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
Making/Answering Calls
TG67xxE(en)_1226_ver022.pdf 20 2011/12/26 11:45:56
Page: 20
emphasise existing line noise. If it becomes
difficult to hear, turn this feature off.
R This feature is not available while using the
speakerphone.
Call share
You can join an existing outside call.
To join the conversation, press M N when
the other handset is on an outside call.
Note:
R To prevent other users from joining your
conversations with outside callers, turn the
privacy mode on (page 27).
Key lock
The handset can be locked so that no calls or
settings can be made. Incoming calls can be
answered, but all other functions are disabled
while key lock is on.
To turn key lock on, press for about 3
seconds.
R is displayed.
R To turn key lock off, press for about 3
seconds.
Note:
R Calls to emergency numbers cannot be
made until key lock is turned off.
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333 21
Making/Answering Calls
TG67xxE(en)_1226_ver022.pdf 21 2011/12/26 11:45:56
Page: 21
Handset phonebook
The phonebook allows you to make calls
without having to dial manually. You can add
100 names and phone numbers.
Adding entries
1 a
2 Enter the party’s name (16 characters
max.). a
R You can change the character entry
mode by pressing (page 42).
3 Enter the party’s phone number (24 digits
max.). a 2 times
R To add other entries, repeat from step
2.
4 M N
Finding and calling from a
phonebook entry
Scrolling through all entries
1
2 MbN: Select the desired entry.
R You can scroll through the phonebook
entry by pressing and holding MCN or
MDN.
3 M N
Searching by first character
1
R Change the character entry mode if
necessary:
a MbN: Select the character
entry mode. a
2 Press the dial key (0 to 9, or #) which
contains the character you are searching
for (page 42).
R Press the same dial key repeatedly to
display the first entry corresponding to
each character located on that dial key.
R If there is no entry corresponding to
the character you selected, the next
entry is displayed.
3 MbN: Scroll through the phonebook if
necessary.
4 M N
Editing entries
1 Find the desired entry (page 22). a
2 MbN: “Edit” a
3 Edit the name if necessary (16 characters
max.; page 42). a
4 Edit the phone number if necessary (24
digits max.). a 2 times a M N
Erasing entries
Erasing an entry
1 Find the desired entry (page 22).
2 a MbN: “Yes” a a M N
Erasing all entries
1 a
2 MbN: “Erase All” a
3 MbN: “Yes” a
4 MbN: “Yes” a a M N
Chain dial
This feature allows you to dial phone numbers
in the phonebook while you are on a call. This
feature can be used, for example, to dial a
calling card access number or bank account
PIN that you have stored in the phonebook,
without having to dial manually.
1 During an outside call, press .
2 MbN: “Phonebook” a
3 MbN: Select the desired entry.
4 Press to dial the number.
22 Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
Phonebook
TG67xxE(en)_1226_ver022.pdf 22 2011/12/26 11:45:56
Page: 22
Note:
R When storing a calling card access number
and your PIN in the phonebook as one
phonebook entry, press to add
pauses after the number and PIN as
necessary (page 19).
Copying phonebook
entries
You can copy phonebook entries between 2
handsets.
Copying an entry
1 Find the desired entry (page 22). a
2 MbN: “Copy” a
3 MbN: Select the handset you want to send
the phonebook entry to. a
R When an entry has been copied,
“Completed” is displayed.
R To continue copying another entry:
MbN: “Yes” a a MbN: Select
the desired entry. a
4 M N
Copying all entries
1 a
2 MbN: “Copy All” a
3 MbN: Select the handset you want to send
the phonebook entry to. a
R When all entries have been copied,
“Completed” is displayed.
4 M N
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333 23
Phonebook
TG67xxE(en)_1226_ver022.pdf 23 2011/12/26 11:45:56
Page: 23
Programmable settings
You can customise the unit by programming the following features using the handset.
To access the features, there are 2 methods.
n Scrolling through the display menus
1
2 Press MCN, MDN, MEN, or MFN to select the desired main menu. a
3 Press MCN or MDN to select the desired item from the next sub-menus. a
4 Press MCN or MDN to select the desired setting. a
R This step may vary depending on the feature being programmed.
R To exit the operation, press M N.
n Using the direct command code
1 a Enter the desired code.
Example: Press #101.
2 Select the desired setting. a
R This step may vary depending on the feature being programmed.
R To exit the operation, press M N.
Note:
R In the following table, < > indicates the default settings.
R In the following table, indicates the reference page number.
R Display menu order and sub-menu may vary depending on your model.
Display the menu tree and direct command code table
Main menu: “Caller List”
Operation Code
Viewing the caller list. #213 33
Main menu: “Answer System”*1
Sub-menu 1 Sub-menu 2 Settings Code
Play New Msg.
(Msg.: message)
– – #323 36
Play All Msg. – – #324 36
Erase All Msg.*2 – – #325 37
Greeting Start REC*2
(Record greeting)
– #302 36
Play Greeting – #303 36
Default*2
(Reset to pre-recorded
greeting)
– #304 36
24 Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
Programming
TG67xxE(en)_1226_ver022.pdf 24 2011/12/26 11:45:56
Page: 24
Sub-menu 1 Sub-menu 2 Settings Code
Settings Number of Rings*2 2–9: 2-9 Rings
5: <5 Rings>
0: Auto
#211 38
Recording Time*2 1: 1 Minute
3: <3 Minutes>
0: Greeting Only*3
#305 39
Remote Code*2 – #306 37
Call Screening 1: <On> 0: Off #310 35
Answer On*2 – – #327 35
Answer Off*2 – – #328 35
Main menu: “Time Settings”
Sub-menu 1 Sub-menu 2 Settings Code
Set Date/Time*2 – – #101 16
Memo Alarm 1–3: Alarm1-3 1: Once
2: Daily
3: Weekly
0: <Off>
#720 28
Time Adjustment*2, *4 – 1: <Caller ID>
0: Manual
#226 –
Main menu: “Intercom”
Operation Code
Paging the desired unit. #274 41
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333 25
Programming
TG67xxE(en)_1226_ver022.pdf 25 2011/12/26 11:45:56
Page: 25
Main menu: “Initial Setup”
Sub-menu 1 Sub-menu 2 Settings Code
Ringer Setup Ringer Volume
– Handset
0–6: Off–6 <6> #160 20
Ringer Volume
– Base Unit*1, *2
0–6: Off–6 <3> #G160 –
Ringtone*5, *6 (Handset) <Ringtone 1> #161 –
Night Mode
– On/Off
1: On 0: <Off> #238 29
Night Mode
– Start/End
<23:00/06:00> #237 29
Night Mode
– Ring Delay
1: 30 sec.
2: <60 sec.>
3: 90 sec.
4: 120 sec.
0: No Ringing
#239 29
First Ring*2, *7 1: <On> 0: Off #173 –
Time Settings Set Date/Time*2 – #101 16
Memo Alarm
– 1–3: Alarm1-3
1: Once
2: Daily
3: Weekly
0: <Off>
#720 28
Time Adjustment*2, *4 1: <Caller ID>
0: Manual
#226 –
Handset Name – – #104 29
Caller Barred*2 – – #217 30
Eco Setup Transmission Power*2 1: <Normal> 2: Low #725 17
Display Setup LCD & Key Backlight 1: <On> 0: Off #276 –
Contrast
(Display contrast)
1–6: Level 1-6
<3>
#145 –
Top Key Setup – – #278 17
Keytones*8 – 1: <On> 0: Off #165 –
Call Restrict*2 – – #256 30
Auto Talk*9 – 1: On 0: <Off> #200 19
26 Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
Programming
TG67xxE(en)_1226_ver022.pdf 26 2011/12/26 11:45:57
Page: 26
Sub-menu 1 Sub-menu 2 Settings Code
Line Setup Recall/Flash*2, *10 0: 900 msec.
1: 700 msec.
2: 600 msec.
3: 400 msec.
4: 300 msec.
5: 250 msec.
G: 200 msec.
#: 160 msec.
6: 110 msec.
7: <100 msec.>
8: 90 msec.
9: 80 msec.
#121 20
Privacy Mode*2, *11 – 1: On 0: <Off> #194 –
Base Unit PIN*2 – <0000> #132 31
Repeater Mode*2 – 1: On 0: <Off> #138 32
Register Register H.set
(H.set: handset)
– #130 31
Cancel Register*3 – #131 31
Language Display <English> #110 16
Main menu: “Ringer Setup”
Sub-menu 1 Sub-menu 2 Settings Code
Ringer Volume Handset 0–6: Off–6 <6> #160 20
Base Unit*1, *2 0–6: Off–6 <3> #G160 –
Ringtone*5, *6
(Handset)
– <Ringtone 1> #161 –
Night Mode On/Off 1: On 0: <Off> #238 29
Start/End <23:00/06:00> #237 29
Ring Delay 1: 30 sec.
2: <60 sec.>
3: 90 sec.
4: 120 sec.
0: No Ringing
#239 29
First Ring*2, *7 – 1: <On> 0: Off #173 –
Main menu: “Caller Barred”*2, *12
Operation Code
Storing/Viewing bar call numbers. #217 30
*1 KX-TG6721 series: page 3
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333 27
Programming
TG67xxE(en)_1226_ver022.pdf 27 2011/12/26 11:45:57
Page: 27
*2 If you program these settings using one of the handsets, you do not need to program the
same item using another handset.
*3 This menu is not displayed when scrolling through the display menus. It is only available in
direct command code.
*4 This feature allows the unit to automatically adjust the date and time each time caller
information including date and time is received.
To turn this feature on, select “Caller ID”. To turn this feature off, select “Manual”.
(Caller ID subscribers only)
To use this feature, set the date and time first (page 16).
*5 The ringer tone may continue to play for several seconds even if the caller has already hung
up. You may either hear a dial tone or no one on the line when you answer the call.
*6 The preset melodies in this product are used with permission of © 2010 Copyrights Vision
Inc.
*7 If you do not want the unit to ring before the caller information is received, set to “Off”.
(Caller ID subscribers only)
You can only remove the first ring if the unit rings two times or more by default, which
depends on your service provider/telephone company.
*8 Turn this feature off if you prefer not to hear key tones while you are dialling or pressing any
keys, including confirmation tones and error tones.
*9 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up
the handset to answer a call, turn off this feature.
*10 The recall/flash time depends on your telephone exchange or host PBX. Contact your PBX
supplier if necessary.
*11 To prevent other users from joining your conversations with outside callers, turn this feature
on.
*12 KX-TG6711 series: page 3
Special programming
Alarm
An alarm sounds at the set time for 1 minute
and is repeated 5 times at 5 minute intervals
(snooze function). A text memo can also be
displayed for the alarm. A total of 3 separate
alarm times can be programmed for each
handset. You can set one of 3 different alarm
options (once, daily, or weekly) for each alarm
time.
Important:
R Set the date and time beforehand
(page 16).
1 #720
2 Select an alarm by pressing 1 to 3. a
3 MbN: Select the desired alarm option. a
“Off”
Turns alarm off. Go to step 9.
“Once”
An alarm sounds once at the set time.
“Daily”
An alarm sounds daily at the set time.
Go to step 5.
“Weekly”
Alarm sounds weekly at the set time(s).
4 Proceed with the operation according to
your selection in step 3.
n Once:
Enter the desired date and month. a
28 Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
Programming
TG67xxE(en)_1226_ver022.pdf 28 2011/12/26 11:45:57
Page: 28
n Weekly:
MbN: Select the desired day of the
week and press . a
5 Set the desired time. a
6 Enter a text memo (10 characters max.;
page 42). a
7 MbN: Select the desired alarm tone. a
R We recommend selecting a different
ringer tone from the one used for
outside calls.
8 MbN: Select the desired snooze setting.
a
9 a M N
R When the alarm is set, is displayed.
Note:
R Press to stop the alarm completely.
R When the handset is in use, the alarm will
not sound until the handset is in standby
mode.
R Press any dial key, MSmart functionN, or
to stop the sound but keep the
snooze function activated.
R If you want to make an outside call when
the snooze function is activated, please
stop the snooze function before making the
call.
Night mode
Night mode allows you to select a period of
time during which the handset will not ring for
outside calls. This feature is useful for time
periods when you do not want to be disturbed,
for example, while sleeping. Night mode can
be set for each handset.
Important:
R Set the date and time beforehand
(page 16).
R We recommend turning the base unit ringer
off (page 26) in addition to turning the night
mode on. (KX-TG6721 series: page 3)
R If you have set the alarm, the alarm sounds
even if the night mode is turned on.
Turning night mode on/off
1 #238
2 MbN: Select the desired setting. a
R If you select “Off”, press M N to
exit.
3 Enter the desired hour and minute you
wish to start this feature. a
R You can select 24-hour or 12-hour
clock format (“AM” or “PM”) by
pressing .
4 Enter the desired hour and minute you
wish to end this feature. a
5 M N
R When the night mode is set, is
displayed.
Changing the start and end time
1 #237
2 Continue from step 3, “Turning night
mode on/off”, page 29.
Setting the ring delay
This setting allows the handset to ring during
night mode if the caller waits long enough.
After the selected amount of time passes, the
handset rings. If you select “No Ringing”,
the handset never rings during night mode.
1 #239
2 MbN: Select the desired setting. a
a M N
Note:
R When the answering system answers the
call, this feature does not work.
(KX-TG6721 series: page 3)
Changing the handset name
Each handset can be given a customised
name (“Bob”, “Kitchen”, etc.). This is useful
when you make intercom calls between
handsets. You can also select whether or not
the handset name is displayed in standby
mode. The default setting is “No”. If you select
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333 29
Programming
TG67xxE(en)_1226_ver022.pdf 29 2011/12/26 11:45:57
Page: 29
“Yes” without entering any handset name,
“Handset 1” to “Handset 6” is displayed.
1 #104
2 Enter the desired name (max. 10
characters; page 42).
R If not required, go to step 3.
3
4 MbN: Select the desired setting. a 2
times
5 M N
Incoming call barring (Caller ID
subscribers only)
This feature allows the unit to reject calls from
specified phone numbers that you do not want
to answer such as junk calls.
When a call is received, the unit does not ring
while the caller is being identified. If the phone
number matches an entry in the call barred
list, the unit sends out a busy tone to the
caller, and then disconnects the call.
Important:
R When the unit receives a call from a
number that is stored in the call barred list,
the call is logged in the caller list
(page 33) with after the call is
disconnected.
Storing unwanted callers
You can store up to 30 phone numbers in the
call barred list.
Important:
R You must store the phone number with an
area code in the call barred list.
n From the caller list:
1 MFN ( )
2 MbN: Select the entry to be barred. a
3 MbN: “Caller Barred” a
4 MbN: “Yes” a a M N
n By entering phone numbers:
1 #217 a
2 Enter the phone number (24 digits
max.). a
R To erase a digit, press .
3 M N
Viewing/editing/erasing bar call
numbers
1 #217
2 MbN: Select the desired entry.
R To exit, press M N.
3 To edit a number:
a Edit the phone number. a
a M N
To erase a number:
a MbN: “Yes” a a M N
Note:
R When editing, press the desired dial key to
add, to erase.
Setting call restriction
You can restrict selected handsets from
dialling certain numbers. You can assign up to
6 phone numbers to be restricted, and select
which handsets are to be restricted. Storing
area codes here prevents the restricted
handsets from dialling any phone number in
that area code.
1 #256
2 Enter the base unit PIN (default: “0000”).
R If you forget your PIN, see page 46.
3 Select the handsets to be restricted by
pressing 1 to 6.
R All handsets registered to the base unit
are displayed.
R “ ” is displayed next to the selected
handset numbers.
R To cancel a selected handset, press
the same dial key again. “ ”
disappears.
4
5 Select a memory location by pressing 1
to 6. a
30 Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
Programming
TG67xxE(en)_1226_ver022.pdf 30 2011/12/26 11:45:57
Page: 30
6 Enter the phone number or area code to
be restricted (8 digits max.). a a
M N
R To erase a restricted number, press
.
Changing the base unit PIN
(Personal Identification Number)
Important:
R If you change the PIN, please make note of
your new PIN. The unit will not reveal the
PIN to you. If you forget your PIN, see
page 46.
1 #132
2 Enter the current 4-digit base unit PIN
(default: “0000”).
3 Enter the new 4-digit base unit PIN. a
a M N
Registering a unit
Operating additional units
Additional handsets
Up to 6 handsets can be registered to the
base unit.
Important:
R The additional handset model
recommended for use with this unit is noted
on page 5. If another handset model is
used, certain operations (handset settings,
base unit settings, etc.) may not be
available.
Registering a handset to the
base unit
The supplied handset and base unit are
pre-registered. If for some reason the handset
is not registered to the base unit (for example,
is displayed even when the handset is
near the base unit), re-register the handset.
1 Handset:
#130
2 Base unit:
Proceed with the operation for your
model.
n KX-TG6711 series: page 3
Press and hold M N for about 5
seconds. (No registration tone)
n KX-TG6721 series: page 3
Press and hold M N for about 5
seconds, until the registration tone
sounds.
R If all registered handsets start ringing,
press M N again to stop, then repeat
this step.
R The next step must be completed
within 90 seconds.
3 Handset:
a Wait until “Base PIN” is
displayed. a Enter the base unit PIN
(default: “0000”). a
R If you forget your PIN, see page 46.
R When the handset has been registered
successfully, is displayed.
Note:
R While registering, “Base in
registering” is displayed on all
registered handsets.
R When you purchase an additional handset,
refer to the additional handset’s installation
manual for registration.
Deregistering a handset
A handset can cancel its own registration to
the base unit, or other handsets registered to
the same base unit. This allows the handset to
end its wireless connection with the system.
1 #131
R All handsets registered to the base unit
are displayed.
2 MbN: Select the handset you want to
cancel. a
3 MbN: “Yes” a
R A confirmation tone sounds.
R The handset does not beep when
cancelling its own registration.
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333 31
Programming
TG67xxE(en)_1226_ver022.pdf 31 2011/12/26 11:45:57
Page: 31
4 M N
Increasing the range of the base
unit
You can increase the signal range of the base
unit by using a DECT repeater. Please use
only the Panasonic DECT repeater noted on
page 4. Contact your Panasonic dealer for
details.
Important:
R Before registering the repeater to this base
unit, you must turn the repeater mode on.
R Do not use more than one repeater at a
time.
Setting the repeater mode
1 #138
2 MbN: Select the desired setting. a
a M N
Note:
R After turning the repeater mode on or off,
is displayed on the handset
momentarily. This is normal and the
handset can be used once is displayed.
Registering the DECT repeater
(KX-A405) to the base unit
Note:
R Please use a repeater that has not yet been
registered to another unit. If the repeater is
registered to another unit, deregister it first,
referring to the Installation Guide for the
DECT repeater.
1 Base unit:
Proceed with the operation for your
model.
n KX-TG6711 series: page 3
Press and hold M N for about 5
seconds. (No registration tone)
n KX-TG6721 series: page 3
Press and hold M N for about 5
seconds, until the registration tone
sounds.
R The next step must be completed
within 90 seconds.
2 DECT repeater:
Connect the AC adaptor, then wait until
the indicator and indicator light
green.
3 Base unit:
To exit the registration mode, press M N.
R The registration tone stops.
(KX-TG6721 series: page 3)
32 Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
Programming
TG67xxE(en)_1226_ver022.pdf 32 2011/12/26 11:45:57
Page: 32
Using Caller ID service
Important:
R This unit is Caller ID compatible. To use
Caller ID features, you must subscribe to a
Caller ID service. Contact your service
provider/telephone company for details.
Caller ID features
When an outside call is being received, the
caller’s phone number is displayed.
Caller information for the last 50 callers is
logged in the caller list from the most recent
call to the oldest.
R If the unit cannot receive caller information,
the following is displayed:
– “Out of Area”: The caller dials from
an area which does not provide a Caller
ID service.
– “Private Caller”: The caller
requests not to send caller information.
R If the unit is connected to a PBX system,
caller information may not be properly
received. Contact your PBX supplier.
Missed calls
If a call is not answered, the unit treats it as a
missed call and is displayed. This lets you
know if you should view the caller list to see
who called while you were away.
Even if only one missed call in the caller list is
viewed (page 33), disappears from the
display. When you receive another new call,
is displayed again.
Note:
R Even when there are unviewed missed
calls, disappears from the standby
display if the following operation is
performed by one of the registered
handsets:
– Being replaced on the base unit or
charger.
– Pressing M N.
Phonebook name display
When caller information is received and it
matches a phone number stored in the
phonebook, the stored name in the
phonebook is displayed and logged in the
caller list.
Caller list
Important:
R Only 1 person can access the caller list at a
time.
R Make sure the unit’s date and time setting
is correct (page 16).
Viewing the caller list and calling
back
1 MFN ( )
2 Press MCN to search from the most recent
call, or press MDN to search from the
oldest call.
R If is displayed, not all of the
information is shown. To see the
remaining information, press MEN. To
return to the previous screen, press
MFN.
3 To call back, press M N.
To exit, press M N.
Note:
R If the entry has already been viewed or
answered, “ ” is displayed, even if it was
viewed or answered using another handset.
R If the call matches an entry in the call
barred list, the number is logged with
(page 30).
Using the smart function key
When is displayed and the smart function
indicator flashes slowly, there are missed calls.
Press MSmart functionN in step 1 on “Viewing
the caller list and calling back”, page 33.
R “Missed Call” must be set to “On” in
Top key setup (page 17).
R If the handset is placed on the base unit or
charger, you need to lift up the handset to
view the caller list after pressing MSmart
functionN.
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333 33
Caller ID Service
TG67xxE(en)_1226_ver022.pdf 33 2011/12/26 11:45:57
Page: 33
R When the unit has new messages*1 and
missed calls, the unit can be operated to
play the new messages first and then show
the missed calls.
*1 KX-TG6721 series: page 3
Editing a caller’s phone number
before calling back
1 MFN ( )
2 MbN: Select the desired entry.
3 a Edit the number.
R Press dial key (0 to 9) to add,
to delete.
4 M N
Erasing selected caller
information
1 MFN ( )
2 MbN: Select the desired entry.
3 a MbN: “Yes” a a M N
Erasing all caller information
1 MFN ( )
2 a MbN: “Yes” a a M N
Storing caller information to the
phonebook
1 MFN ( )
2 MbN: Select the desired entry. a
3 MbN: “Phonebook” a
4 To store the name, continue from step 2,
“Adding entries”, page 22.
34 Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
Caller ID Service
TG67xxE(en)_1226_ver022.pdf 34 2011/12/26 11:45:57
Page: 34
Answering system
Available for:
KX-TG6721 series (page 3)
The answering system can answer and record
calls for you when you are unavailable to
answer the phone.
You can also set the unit to play a greeting
message but not to record caller messages by
selecting “Greeting Only” as the recording
time setting (page 39).
Important:
R Only 1 person can access the answering
system (listen to messages, record a
greeting message, etc.) at a time.
R When callers leave messages, the unit
records the day and time of each message.
Make sure the date and time have been set
correctly (page 16).
Memory capacity (including your
greeting message)
The total recording capacity is about 30
minutes. A maximum of 64 messages can be
recorded.
Note:
R When message memory becomes full:
– “Messages Full” is shown on the
handset display.
– The answer on indicator on the base unit
flashes rapidly if the answering system is
turned on.
– The message counter on the base unit
flashes if the answering system is turned
on.
– and the total number of new
messages are not displayed on the
handset even if the answering system is
turned on.
– If you use the pre-recorded greeting
message, the unit automatically switches
to another pre-recorded greeting
message asking callers to call again
later.
– If you recorded your own greeting
message, the same message is still
announced to callers even though their
messages are not recorded.
Turning the answering
system on/off
The answering system is preset to on.
Base unit
Press M N to turn on/off the answering
system.
R When the answering system is turned on:
– The answer on indicator lights up.
– The message counter displays the total
number of messages (old and new).
Handset
1 To turn on:
#327
To turn off:
#328
2 M N
Note:
R When the answering system is turned on,
is displayed next to the battery icon.
Call screening
While a caller is leaving a message, you can
listen to the call through the handset’s
speaker. To adjust the speaker volume, press
MDN or MCN repeatedly. You can answer the call
by pressing M N on the handset. Call
screening can be set for each handset. The
default setting is “On”.
1 #310
2 MbN: Select the desired setting. a
a M N
Greeting message
When the unit answers a call, a greeting
message is played to callers.
You can use either:
– your own greeting message
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333 35
Answering System
TG67xxE(en)_1226_ver022.pdf 35 2011/12/26 11:45:57
Page: 35
– a pre-recorded greeting message
Recording your greeting message
1 #302
2 MbN: “Yes” a
3 After a beep sounds, hold the handset
about 20 cm away and speak clearly into
the microphone (2 minutes and 30
seconds max.).
4 Press to stop recording.
5 M N
Using a pre-recorded greeting
message
The unit provides 2 pre-recorded greeting
messages:
– If you erase or do not record your own
greeting message, the unit plays a
pre-recorded greeting asking callers to
leave a message.
– If the message recording time (page 39)
is set to “Greeting Only”, callers’
messages are not recorded and the unit
plays a different pre-recorded greeting
message asking callers to call again.
Resetting to a pre-recorded greeting
message
If you want to use a pre-recorded greeting
message once you record your own greeting
message, you need to erase your own
greeting message.
1 #304
2 a M N
Playing back the greeting
message
1 #303
2 M N
Listening to messages
using the base unit
When new messages have been recorded,
M N on the base unit flashes.
Press M N.
R If new messages have been recorded, the
base unit plays back new messages.
R If there are no new messages, the base
unit plays back all messages.
Operating the answering system
during playback
Key Operation
MjN or MkN Adjust the speaker volume
M N Repeat message*1
M N Skip message
MnN Stop playback
M N Erase currently playing
message
*1 If pressed within the first 5 seconds of a
message, the previous message is
played.
Erasing all messages
Press M N 2 times while the unit is not in use.
Listening to messages
using the handset
When new messages have been recorded,
is displayed on the handset with the total
number of new messages.
1 To listen to new messages:
#323
To listen to all messages:
#324
2 When finished, press M N.
Note:
R To switch to the receiver, press M N.
36 Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
Answering System
TG67xxE(en)_1226_ver022.pdf 36 2011/12/26 11:45:57
Page: 36
Using the smart function key
When is displayed and the smart function
indicator flashes slowly, there are new
messages.
Press MSmart functionN in step 1 on
“Listening to messages using the handset”,
page 36.
R “New Message” must be set to “On” in
Top key setup (page 17).
Operating the answering system
a a
Key Operation
MDN or MCN Adjust the receiver or speaker
volume (during playback)
1 or MFN Repeat message
(during playback)*1
2 or MEN Skip message
(during playback)
3 Enter the “Settings” menu
4 Play new messages
5 Play all messages
6 Play greeting message
76 Record greeting message
8 Turn answering system on
Pause message*2
9 or Stop recording
Stop playback
0 Turn answering system off
*4*3 Erase currently playing
message
*5 Erase all messages
*6 Reset to a pre-recorded
greeting message
*1 If pressed within the first 5 seconds of a
message, the previous message is
played.
*2 To resume playback:
MbN: “Play” a
*3 You can also erase as follows:
a MbN: “Yes” a
Calling back (Caller ID
subscribers only)
If caller information is received for the call, you
can call the caller back while listening to a
message.
1 Press during playback.
2 MbN: “Call Back” a
Editing the number before calling back
1 Press during playback.
2 MbN: “Edit & Call” a
3 Edit the number. a M N
Erasing all messages
1 #325
2 MbN: “Yes” a a M N
Remote operation
Using a touch-tone phone, you can call your
phone number from outside and access the
unit to listen to messages or change
answering system settings. The unit’s voice
guidance prompts you to press certain dial
keys to perform different operations.
Remote access code
A 3-digit remote access code must be entered
when operating the answering system
remotely. This code prevents unauthorised
parties from listening to your messages
remotely.
Important:
R In order to operate the answering system
remotely, you must first set a remote
access code.
1 #306
2 To turn on remote operation, enter the
desired 3-digit remote access code.
3 a M N
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333 37
Answering System
TG67xxE(en)_1226_ver022.pdf 37 2011/12/26 11:45:57
Page: 37
Deactivating remote operation
Press * in step 2 on “Remote access code”,
page 37.
R The entered remote access code is deleted.
Using the answering system
remotely
1 Dial your phone number from a
touch-tone phone.
2 After the greeting message starts, enter
your remote access code.
3 Follow the voice guidance prompts as
necessary or control the unit using
remote commands (page 38).
4 When finished, hang up.
Voice guidance
During remote operation, the unit’s voice
guidance starts and prompts you to press 1
to perform a specific operation, or press 2 to
listen to more available operations.
Note:
R If you do not press any dial keys within 10
seconds after a voice guidance prompt, the
unit disconnects your call.
Remote commands
You can press dial keys to access certain
answering system functions without waiting for
the voice guidance to prompt you.
Key Operation
1 Repeat message
(during playback)*1
2 Skip message
(during playback)
4 Play new messages
5 Play all messages
6 Play greeting message
7 Record greeting message
9 Stop recording
Stop playback
Key Operation
0 Turn answering system off
*4 Erase currently playing message
*5 Erase all messages
*6 Reset to a pre-recorded greeting
message (during greeting message
playback)
*# End remote operation
(or hang up)
*1 If pressed within the first 5 seconds of a
message, the previous message is
played.
Turning on the answering system
remotely
If the answering system is off, you can turn it
on remotely.
1 Dial your phone number from a
touch-tone phone.
2 Let the phone ring 20 times.
R A long beep is heard.
3 Enter your remote access code within 10
seconds after the long beep.
R The greeting message is played back.
R You can either hang up, or enter your
remote access code again and begin
remote operation (page 37).
Answering system settings
Number of rings before the unit
answers a call
You can change the number of times the
phone rings “Number of Rings” before the
unit answers a call. You can select 2 to 9
rings, or “Auto”. The default setting is “5
Rings”.
“Auto”: The unit’s answering system answers
at the end of the 2nd ring when new
messages have been recorded, or at the end
of the 5th ring when there are no new
messages. If you call your phone from outside
38 Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
Answering System
TG67xxE(en)_1226_ver022.pdf 38 2011/12/26 11:45:58
Page: 38
to listen to new messages (page 38), you
know that there are no new messages when
the phone rings for the 3rd time. You can then
hang up without being charged for the call.
1 #211
2 MbN: Select the desired setting. a
a M N
For voice mail service subscribers
To receive voice mail and use answering
system properly, please note the following:
R To use the voice mail service (page 40)
provided by your service provider/telephone
company rather than the unit’s answering
system, turn off the answering system
(page 35).
R To use this unit’s answering system rather
than the voice mail service provided by
your service provider/telephone company,
please contact your service provider/
telephone company to deactivate your
voice mail service.
If your service provider/telephone company
cannot do this:
– Set this unit’s “Number of Rings”
setting so that this unit’s answering
system answers calls before the voice
mail service of your service provider/
telephone company does. It is necessary
to check the number of rings required to
activate the voice mail service provided
by your service provider/telephone
company before changing this setting.
– Change the number of rings of the voice
mail service so that the answering
system can answer the call first. To do
so, contact your service provider/
telephone company.
Caller’s recording time
You can change the maximum message
recording time allowed for each caller. The
default setting is “3 Minutes”.
1 #305
2 MbN: Select the desired setting. a
a M N
Selecting “Greeting Only”
You can select “Greeting Only” which sets
the unit to announce a greeting message to
callers but not record messages.
Select “Greeting Only” in step 2 on
“Caller’s recording time”, page 39.
Note:
R When you select “Greeting Only”:
– If you do not record your own message,
the unit will play the pre-recorded
greeting-only message asking callers to
call again later.
– If you use your own message, record the
greeting-only message asking callers to
call again later (page 36).
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333 39
Answering System
TG67xxE(en)_1226_ver022.pdf 39 2011/12/26 11:45:58
Page: 39
Voice mail service
Voice mail is an automatic answering service
offered by your service provider/telephone
company. After you subscribe to this service,
your service provider/telephone company’s
voice mail system answers calls for you when
you are unavailable to answer the phone or
when your line is busy. Messages are
recorded by your service provider/telephone
company, not your telephone. When you have
new messages, is displayed on the
handset if message indication service is
available. Please contact your service provider/
telephone company for details of this service.
Important:
R If still remains on the display even after
you have listened to new messages, turn it
off by pressing and holding # for 2
seconds.
R To use the voice mail service provided by
your service provider/telephone company
rather than the unit’s answering system,
turn off the answering system (page 35).
For details, see page 39.
(KX-TG6721 series: page 3)
40 Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
Voice Mail Service
TG67xxE(en)_1226_ver022.pdf 40 2011/12/26 11:45:58
Page: 40
Intercom
Intercom calls can be made between
handsets.
Note:
R When paging the handset, the paged
handset beeps for 1 minute.
R If you receive an outside call while talking
on the intercom, you hear 2 tones. To
answer the call, press M N, then press
M N.
Making an intercom call
1 a
2 MbN: Select the desired unit. a
R To stop paging, press M N.
3 When you finish talking, press M N.
Answering an intercom call
1 Press M N to answer the page.
2 When you finish talking, press M N.
Using the smart function key
Press MSmart functionN to answer the page.
Handset locator
You can locate a misplaced handset by
paging it.
1 Base unit: Press M N.
R All registered handsets beep for 1
minute.
2 To stop paging:
Base unit: Press M N.
Handset: Press M N.
Using the smart function key
You can also stop paging by pressing MSmart
functionN.
Transferring calls,
conference calls
Outside calls can be transferred or a
conference call with an outside party can be
made between 2 handsets.
1 During an outside call, press to put
the call on hold.
2 MbN: Select the desired unit. a
3 Wait for the paged party to answer.
R If the paged party does not answer,
press to return to the outside call.
4 To complete the transfer:
Press M N.
R The outside call is being routed to the
destination unit.
To establish a conference call:
a MbN: “Conference” a
R To leave the conference, press
M N. The other 2 parties can
continue the conversation.
R To put the outside call on hold:
a MbN: “Hold” a
To resume the conference: a
MbN: “Conference” a
Note:
R If you want to return to the outside call after
the paged party answers, press .
Answering a transferred call
Press M N to answer the page.
Using the smart function key
Press MSmart functionN to answer the page.
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333 41
Intercom/Locator
TG67xxE(en)_1226_ver022.pdf 41 2011/12/26 11:45:58
Page: 41
Character entry
The dial keys are used to enter characters and numbers. Each dial key has multiple characters
assigned to it. The characters that can be entered depend on the character entry mode
(page 42).
– Press MFN or MEN to move the cursor left or right.
– Press dial keys to enter characters and numbers.
– Press to erase the character or number highlighted by the cursor. Press and hold to
erase all characters or numbers.
– Press * (Aaa) to switch between uppercase and lowercase.
– To enter another character located on the same dial key, press MEN to move the cursor to the
next space, then press the appropriate dial key.
– If you do not press any dial key within 5 seconds after entering a character, the character is
fixed and the cursor moves to the next space.
Character entry modes
The available character entry modes are Alphabet (ABC), Numeric (0-9), Greek ( ),
Extended 1 ( ), Extended 2 ( ), and Cyrillic ( ). When in these entry modes except
Numeric, you can select which character is entered by pressing a dial key repeatedly.
When the unit displays the character entry screen:
a MbN: Select a character entry mode. a
Note:
R in the following tables represents a single space.
Alphabet character table (ABC)
z y
1 2 3 4 5 6 7 8 9
Numeric entry table (0-9)
z y
1 2 3 4 5 6 7 8 9
Greek character table ( )
z y
1 2 3 4 5 6 7 8 9
42 Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
Useful Information
TG67xxE(en)_1226_ver022.pdf 42 2011/12/26 11:45:58
Page: 42
Extended 1 character table ( )
z y
1 2 3 4 5 6 7 8 9
R The following are used for both uppercase and lowercase:
Extended 2 character table ( )
z y
1 2 3 4 5 6 7 8 9
R The following are used for both uppercase and lowercase:
Cyrillic character table ( )
z y
1 2 3 4 5 6 7 8 9
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333 43
Useful Information
TG67xxE(en)_1226_ver022.pdf 43 2011/12/26 11:45:58
Page: 43
Error messages
Display message Cause/solution
Base no power
or
No link. Reconnect
AC adaptor.
R The handset has lost communication with the base unit. Move
closer to the base unit and try again.
R Unplug the base unit’s AC adaptor to reset the unit.
Reconnect the adaptor and try again.
R The handset’s registration may have been cancelled.
Re-register the handset (page 31).
Check Phone Line R The supplied telephone line cord has not been connected yet
or not connected properly. Check the connections (page 11).
Error R Recording was too short. Try again.
Failed R Phonebook copy failed (page 23). Confirm the other handset
(the receiver) is in standby mode and try again.
Incomplete R The receiver’s phonebook memory is full. Erase the unwanted
phonebook entries from the other handset (the receiver) and
try again.
Memory Full R The phonebook memory is full. Erase unwanted entries
(page 22).
R Message memory is full. Erase unwanted messages
(page 36, 37).
R The call barred list memory is full. Erase unwanted entries
(page 30).
Use rechargeable
battery.
R A wrong type of battery such as Alkaline or Manganese was
inserted. Use only the rechargeable Ni-MH batteries noted on
page 4, 8.
You must first
subscribe to Caller
ID.
R You must subscribe to a Caller ID service. Once you receive
caller information after subscribing to a Caller ID service, this
message will not be displayed.
44 Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
Useful Information
TG67xxE(en)_1226_ver022.pdf 44 2011/12/26 11:45:58
Page: 44
Troubleshooting
If you still have difficulties after following the instructions in this section, disconnect the base unit’s
AC adaptor and turn off the handset, then reconnect the base unit’s AC adaptor and turn on the
handset.
General use
Problem Cause/solution
The handset does not turn
on even after installing
charged batteries.
R Place the handset on the base unit or charger to turn on the
handset.
The unit does not work. R Make sure the batteries are installed correctly (page 11).
R Fully charge the batteries (page 11).
R Check the connections (page 11).
R Unplug the base unit’s AC adaptor to reset the unit and turn off
the handset. Reconnect the adaptor, turn on the handset and
try again.
R The handset has not been registered to the base unit. Register
the handset (page 31).
The handset display is
blank.
R The handset is not turned on. Turn the power on (page 16).
I cannot hear a dial tone. R Make sure that you are using the supplied telephone line cord.
Your old telephone line cord may have a different wiring
configuration.
R The base unit’s AC adaptor or telephone line cord is not
connected. Check the connections.
R Disconnect the base unit from the telephone line and connect
the line to a known working telephone. If the working
telephone operates properly, contact our service personnel to
have the unit repaired. If the working telephone does not
operate properly, contact your service provider/telephone
company.
I cannot use the smart
function key even if the
smart function indicator is
flashing slowly.
R Another unit is in use. Wait and try again later.
R The key lock feature is turned on. Turn it off (page 21).
Programmable settings
Problem Cause/solution
The display is in a
language I cannot read.
R Change the display language (page 16).
I cannot activate the eco
mode.
R You cannot set eco mode when you set the repeater mode
“On”. If required, set the repeater mode to “Off” (page 32).
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333 45
Useful Information
TG67xxE(en)_1226_ver022.pdf 45 2011/12/26 11:45:58
Page: 45
Problem Cause/solution
I cannot register a handset
to a base unit.
R The maximum number of handsets (6) is already registered to
the base unit. Cancel unused handset registrations from the
base unit (page 31).
R You entered the wrong PIN. If you forget your PIN, see “I
cannot remember the PIN.” (page 46).
I cannot remember the
PIN.
R Change the PIN using the following method.
1 #132
2 *7000
3 Enter the new 4-digit base unit PIN. a a M N
Battery recharge
Problem Cause/solution
The handset beeps and/or
flashes.
R Battery charge is low. Fully charge the batteries (page 11).
I fully charged the
batteries, but
– still flashes or
– the operating time
seems to be shorter.
R Clean the battery ends ( , ) and the charge contacts with
a dry cloth and charge again.
R It is time to replace the batteries (page 11).
Making/answering calls, intercom
Problem Cause/solution
is displayed. R The handset is too far from the base unit. Move closer.
R The base unit’s AC adaptor is not properly connected.
Reconnect AC adaptor to the base unit.
R The handset is not registered to the base unit. Register it
(page 31).
R Activating one touch eco mode reduces the range of the base
unit in standby mode. If required, turn eco mode off (page 17).
Noise is heard, sound cuts
in and out.
R You are using the handset or base unit in an area with high
electrical interference. Re-position the base unit and use the
handset away from sources of interference.
R Move closer to the base unit.
R If you use a DSL/ADSL service, we recommend connecting a
DSL/ADSL filter between the base unit and the telephone line
jack. Contact your DSL/ADSL provider for details.
Sound quality seems to be
getting worse.
R You have registered a handset that is not recommended
(page 5). The clearest sound quality is only possible by
registering the recommended handset.
The handset does not ring. R The ringer volume is turned off. Adjust ringer volume (page 19).
R Night mode is turned on. Turn it off (page 29).
46 Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
Useful Information
TG67xxE(en)_1226_ver022.pdf 46 2011/12/26 11:45:58
Page: 46
Problem Cause/solution
The base unit does not
ring.
R The ringer volume is turned off. Adjust ringer volume (page 26).
I cannot make a call. R You dialled a call restricted number (page 30).
R The key lock feature is turned on. Turn it off (page 21).
Caller ID
Problem Cause/solution
Caller information is not
displayed.
R You must subscribe to a Caller ID service. Contact your
service provider/telephone company for details.
R If your unit is connected to any additional telephone
equipment, remove and plug the unit directly into the wall jack.
R If you use a DSL/ADSL service, we recommend connecting a
DSL/ADSL filter between the base unit and the telephone line
jack. Contact your DSL/ADSL provider for details.
R Other telephone equipment may be interfering with this unit.
Disconnect the other equipment and try again.
Caller information is slow
to display.
R Depending on your service provider/telephone company, the
unit may display the caller’s information at the 2nd ring or later.
Set the first ring to “Off” (page 26).
R Move closer to the base unit.
Time on the unit has
shifted.
R Incorrect time information from incoming Caller ID changes the
time. Set the time adjustment to “Manual” (off) (page 25).
The name stored in the
phonebook is not fully
displayed while an outside
call is being received.
R Edit the phonebook entry name to fit in 1 line of text (page 22).
Answering system
Problem Cause/solution
The unit does not record
new messages.
R The answering system is turned off. Turn it on (page 35).
R The message memory is full. Erase unwanted messages
(page 36).
R The recording time is set to “Greeting Only”. Change the
setting (page 39).
R If you subscribe to a voice mail service, messages are
recorded by your service provider/telephone company, not
your telephone. Change the unit’s number of rings setting or
contact your service provider/telephone company (page 38).
I cannot operate the
answering system
remotely.
R The remote access code is not set. Set the remote access
code (page 37).
R You are entering the wrong remote access code. If you have
forgotten your remote access code, enter the remote access
code setting to check your current code (page 37).
R The answering system is turned off. Turn it on (page 38).
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333 47
Useful Information
TG67xxE(en)_1226_ver022.pdf 47 2011/12/26 11:45:58
Page: 47
Liquid damage
Problem Cause/solution
Liquid or other form of
moisture has entered the
handset/base unit.
R Disconnect the AC adaptor and telephone line cord from the
base unit. Remove the batteries from the handset and leave to
dry for at least 3 days. After the handset/base unit are
completely dry, reconnect the AC adaptor and telephone line
cord. Insert the batteries and charge fully before use. If the unit
does not work properly, contact an authorised service centre.
Caution:
R To avoid permanent damage, do not use a microwave oven to speed up the drying process.
48 Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
Useful Information
TG67xxE(en)_1226_ver022.pdf 48 2011/12/26 11:45:58
Page: 48
Conditions of guarantee
Receipt No. Date of purchase
Model No. Serial No.
This guarantee is in addition to and does not in any way affect any statutory or other rights of
consumer purchasers. If within the applicable guarantee period, the product proves to be
defective by reason of faulty design, workmanship or materials, we undertake subject to the
following conditions to have the defective product (or any part or parts there of) repaired or
replaced free of charge.
1. The product shall have been purchased and used solely within either the U.K. or Ireland
and in accordance with standard operating instructions and the technical and/or Safety
Standards required in the U.K.
2. On being found defective, please consult with the retailer from where it was purchased for
assistance.
3. This guarantee shall not apply to damage caused through fire, accident, lightning, misuse,
wear and tear, neglect, incorrect adjustment or repair, to damage caused through
installation, adaption, modification or use in an improper manner or inconsistent with the
technical and/or safety standards required in the country where this product is used, or to
damage occurred during transit to or from the purchaser.
4. If at any time during the guarantee period any part or parts of the product are replaced
with a part or parts not supplied or approved by us or of an objective quality safe and
suitable for the product, or the product has been dismantled or repaired by any person not
authorised by us, we shall have the right to terminate this guarantee in whole or in part
immediately without further notice.
5. The purchaser’s sole and exclusive remedy under this guarantee against us is for the
repair or replacement of the product or any defective part or parts and no other remedy,
including, but not limited to, incidental or consequential damage or loss of whatsoever
nature shall be available to the purchaser.
6. This guarantee shall not apply to batteries and any other items of limited natural life.
7. Our decision on all matters relating to complaints shall be final. Any product or defective
part which has been replaced shall become our property.
8. The guarantee period applicable to this product shall be 12 months.
Please keep these operating instructions with your receipt.
Panasonic U.K. a branch of Panasonic Marketing Europe GmbH
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333 49
Useful Information
TG67xxE(en)_1226_ver022.pdf 49 2011/12/26 11:45:58
Page: 49
Index
A Additional handsets: 31
Alarm: 28
Answering calls: 19
Answering system: 35
Call screening: 35
Erasing messages: 36, 37, 38
Greeting message: 35
Greeting only: 39
Listening to messages: 36, 38
Number of rings: 38
Recording time: 39
Remote access code: 37
Remote operation: 37
Turning on/off: 35, 37, 38
Auto talk: 19, 26
B Battery: 11, 12
C Call restriction: 30
Call share: 21
Call waiting: 20
Call Waiting Caller ID: 20
Caller ID service: 33
Caller list: 33
Caller list edit: 34
Chain dial: 22
Character entry: 42
Conference calls: 41
Control type: 13
D Date and time: 16
Direct command code: 24
Display
Contrast: 26
Language: 16
E Eco mode: 17
Equalizer: 20
Error messages: 44
F First ring: 26
H Handset
Deregistration: 31
Locator: 41
Name: 29
Registration: 31
Hold: 20
I Incoming call barring: 30
Intercom: 41
K Key lock: 21
Keytones: 26
M Making calls: 19
Missed calls: 33
Mute: 20
N Night mode: 29
P Pause: 19
Phonebook: 22
PIN: 31
Power failure: 12
Power on/off: 16
Privacy mode: 27
R Recall/flash: 20
Redialling: 19
Repeater: 32
Ringer tone: 26
S Smart function key (Top key): 16
Speakerphone: 19
T Time adjustment: 25
Transferring calls: 41
Troubleshooting: 45
V Voice mail: 40
Volume
Receiver: 19
Ringer (Base unit): 26
Ringer (Handset): 19, 26
Speaker: 19
W Wall mounting: 18
50
Index
TG67xxE(en)_1226_ver022.pdf 50 2011/12/26 11:45:58

Question & answers

There are no questions about the Panasonic KX-TG6723 yet.

Ask a question about the Panasonic KX-TG6723

Have a question about the Panasonic KX-TG6723 but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Panasonic KX-TG6723. Please make sure that you describe your difficulty with the Panasonic KX-TG6723 as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.