Panasonic ER131H520 manual

View a manual of the Panasonic ER131H520 below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Panasonic
  • Product: Beard Trimmer
  • Model/name: ER131H520
  • Filetype: PDF
  • Available languages: English

Table of Contents

Page: 0
China
Operating Instructions
Model No. ER131
AC/Rechargeable
Hair Clipper
3
m
m
6
9
m
m
1
2
off
Before operating this unit, please read these instructions completely.
Page: 1
0
A C E
B
D
F
G
I
J
H
L
M
N
K
2
Page: 2
3
on
0
0
1 2 3
4 5 6
7 8 9
10 (c)
(a)
(b)
(d)
11
Index
ENGLISH Page 4
00
ëÚ‡Ìˈ‡  9
ëÚÓ¥Ì͇ 16
Page: 3
Thank you for purchasing the
Panasonic Hair Clipper Model
No.ER131.
Important safety
instructions
Basic safety instructions, including
those listed below, must be observed
when using electrical appliances.
<Warning>
Failure to observe the following may
result in death or serious injury.
Warning-Keep the appliance dry.
1) Do not use the clipper with AC
operation in locations subject to
high humidity, such as in bath-
rooms and shower rooms.
• Failure to observe this may
result in electric shocks, fires or
malfunctions.
2) Disconnect the AC adaptor from
the wall socket when cleaning the
clipper.
• Failure to observe this may
result in electric shocks.
3) Do not plug in or disconnect the
AC adaptor with wet hands.
• Failure to observe this may
result in electric shocks.
4) Do not place the clipper or the AC
adaptor in water. Never wash them
in water or allow them to get wet.
Do not wipe it with thinner,
benzine or alcohol.
• Failure to observe this may
result in electric shocks.
5) Do not disassemble the clipper.
Do not modify the clipper.
Do not attempt repairs.
• Failure to observe this may result
in fires, electric shocks or other
injuries. Repairs must always be
requested to your dealer.
6) Do not use the clipper if the
electric cord or the AC adaptor is
worn, or if the AC adaptor does
not fit snugly in the wall socket.
• Failure to observe this may
result in electric shocks, short
circuits or fires.
7) Do not damage, cut, modify, twist,
forcibly bend or pull the electric
cord. Do not place heavy objects
on the electric cord or trap it
between objects.
• Failure to observe this may
result in electric shocks or fires.
8) Only use the clipper with 230V
AC power supplies.
• Failure to observe this may
result in electric shocks or fires.
9) Clean the electric plug regularly
to remove any dust or dirt.
• Dust or dirt adhering to the electric
plug may reduce insulation
capabilities owing to moisture in
the air, resulting in fires.
<Cautions>
Failure to observe the following may
result in injuries or physical damage.
1) Do not use force to press the
blade against the skin, and do not
apply excessive pressure to the
outer blade.
• Failure to observe this may
result in injuries to the skin or
damage to the blades.
4
Page: 4
5
2) Do not use the clipper for any
purpose other than trimming.
Do not use to trim the hair of a pet.
• Failure to observe this may
result in injuries to the skin.
3) Check that the blades are not
damaged or deformed before use.
• Failure to observe this may
result in injuries to the skin.
<Important>
1) When disconnecting the AC
adaptor from the wall socket,
always grip the AC adaptor and
not the electric cord.
• Failure to observe this may result
in electric shocks or short circuits.
2) Do not store or charge the clipper
in a place exposed to direct
sunlight or near a heater or other
source of heat.
• Failure to observe this may
result in malfunctions or
deformations.
3) Lubricate the clipper before use.
• Failure to observe this may
result in the blades becoming
dull or abnormal noises.
• Failure to observe this may
result in the blades becoming
hot and the deterioration of
cutting performance.
4) Never allow charging to continue
for longer than 48 hours.
• Failure to observe this may
result in shorting the life of the
rechargeable battery.
5) The hair clipper may become
warm during operation and/or
charging.
This is normal.
6) Keep out of the reach of children.
7) Do not attempt to charge the
clipper at temperatures below 0°C
or above 40°C. Charging cannot
be done correctly under such
conditions.
This clipper is indoor use only.
8) Do not attempt to use any power
cord or adaptor other than one
specifically designed for this
model. Use only adaptor RE9-07.
Parts identification
ABlade
BAttachment mounting
CSwitch
DBody
EIndicator lamp
F3/6mm comb attachment
G9/12mm comb attachment
HMoving blade
IFixed blade
JLever for cleaning
KAC adaptor
LPower cord
MOil
NCleaning brush
Before use
Before using each time, apply oil at
the places marked with arrows in
Fig.10.
Page: 5
6
How to use
<Charging instructions>
1) Set the switch to “0” , and plug
the cord into the clipper body.
(Fig.1)
2) Plug the AC adaptor into an AC
outlet. The charging indicator
lamp will light up. (Fig.2)
3) When charging is completed
unplug the AC adaptor from an
AC outlet. The charging time is 8
hours; 1 full charge will provide
approximately 30 minutes of
continuous operation.
<AC operation>
1) Connect the AC adaptor to the
body in the same way as for
charging, and set the switch to “1”
to use the clipper.
2) If the AC adaptor is connected
while the switch is in the “1”
position, the clipper may not
operate. If this occurs, set the
switch to the “0” position, wait
about 1 minute and then set it
back to the “1” position.
3) Be sure to set the switch “0” to
when finished using the clipper. If
the switch is left in the “1” position,
the rechargeable battery will
become completely discharged,
shortening the life of the battery.
<3/6mm, 9/12mm comb
attachments>
1) The cutting heights are indicated
on the insides and sides of the
attachments, so be sure to look
for the height indication in order
to mount the attachment correctly
for the desired cutting height.
2) To mount the comb attachment to
the clipper, place one side of the
hooks of the comb attachment into
the attachment mounting B, then
slide the other side to another
mounting B in the direction
indicated with the arrow. (Fig.3)
3) To remove the comb attachment
from the clipper, slide one side of
the attachment off the mounting B
in the direction indicated with the
arrow. (Fig.4)
<Trimming With No
Attachments>
1) Cut hair by placing the clipper head
directly on the scalp. (Fig.5)
Cutting without an attachment will
trim hair length to 1mm or less.
<Mounting and removal of
the blade>
1) Hold the clipper body with the
“Panasonic” mark facing upward
and push the blade with your
thumb in the direction indicated
by the arrow. When doing this,
catch the blade in your other
hand. Be sure the switch is set to
“0” before attempting to remove
the blade. (Fig.6)
2) To remount the blade, fit the
mounting hook into the blade
mounting on the clipper body and
push in until it “clicks”. (Fig.7)
Page: 6
7
Life of the blade and battery
<Blade life>
1) Although the blade life will vary in
accordance with the frequency
and conditions of use, when used
for five haircuts (each lasting 12
minutes) a day, it should normally
be possible to use the blade for
approximately three months.
However, in order to maintain the
cutting performance of the blade,
it is important to apply the oil
before and after each use.
2) If the cutting performance of the
blade deteriorates and cannot be
restored by cleaning or applying
the oil, it indicates that the blade
has exceeded its useful life, and
that it is time to replace it.
<Battery life>
Although the battery life will vary in
accordance with the frequency and
conditions of use, when charged
every day, it should normally be
possible to use the battery for
approximately 1 year. If the
rechargeable battery is not charged
for longer than 6 months, it will self
discharge, resulting in a shortening
of its life. Therefore, even if the
clipper is not being used, be sure to
recharge the battery at least once
every 6 months. If the clipper can be
operated for only about 10 minutes
after it has been correctly recharged
for 8 hours, it indicates that the
battery has exceeded its useful life
and that it is time to replace it.
Blade Maintenance
<Always clean the blade
after each use>
1) Use the cleaning brush to brush
off the cut hairs from the clipper
body and from around the blade.
(Fig.8)
2) Remove the blade and brush off
the cut hairs from the blade edge.
3) Brush the cut hairs out from
between the fixed blade and the
moving blade. Press down on the
lever for cleaning in order to raise
the moving blade, and brush the
cut hairs out from between the
blades. (Fig.9)
4) Apply a few drops of the oil to the
points indicated by the arrows.
(Fig.10)
5) Remount the blade on the clipper
body.
Page: 7
8
Important notice regarding
environmental protection
The built-in rechargeable Nickel-
Cadmium battery contains sub-
stances which may be environmen-
tally harmful. Before discarding your
electric hair clipper please remove
the battery and be sure that it is dis-
posed of in an environmentally
friendly way.
How to remove the built-in
rechargeable battery before dis-
posal of the <clipper> (Fig.11)
Disconnect the clipper from the AC
outlet when removing the battery.
Fully discharge the battery.
1) Remove the blade from the
clipper. Remove the 4 screws (a).
2) Remove the housing (b).
3) Remove the motor and remove
the circult block from the housing
(c).
4) Remove the battery from the
battery block (d).
Specifications
Power source : 230V AC, 50Hz
Motor voltage : 1.2V DC
Charging time: 8hours
Page: 23
No.1 EN, RU, UA ( ) Printed in China
O
Panasonic Electric Works Wanbao (Guangzhou) Co., Ltd.
Wanbao Base Shiguang Road, Panyu District, Guangzhou, Guangdong, P.R. China

Question & answers

There are no questions about the Panasonic ER131H520 yet.

Ask a question about the Panasonic ER131H520

Have a question about the Panasonic ER131H520 but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Panasonic ER131H520. Please make sure that you describe your difficulty with the Panasonic ER131H520 as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.