Panasonic DS-PAN-112-1 manual

View a manual of the Panasonic DS-PAN-112-1 below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Panasonic
  • Product: Computer accessory
  • Model/name: DS-PAN-112-1
  • Filetype: PDF
  • Available languages: English

Table of Contents

Page: 0
DS-DA-409
Screen Stiffener
Secure your laptop screen to prevent excess wear and reduce
vibration while in use.
DS-DA-102
USB Powered Keyboard Light
Soft red LED light illuminates the laptop keyboard for night viewing.
DS-PAN-110 Series
Havis Rugged Mobile Docking Station
For Panasonic CF-30&CF-31Toughbooks
DS-PAN-110-SERIES-OMN_1-12
www.havis.com
1-800-524-9900
Owner’s Manual
DS-PAN-111
DS-PAN-111-1
DS-PAN-111-2
DS-PAN-112
DS-PAN-112-1
DS-PAN-112-2
DS-PAN-113
Interactive Online Catalog
Related Products
This new and exciting interactive catalog is an easy
to use, full color, online version of our printed catalog.
Visit www.haviscatalog.com for direct access
to the Interactive Catalog!
Mounting Solutions Computing Solutions Power Management
Solutions
Transport Solutions Lighting Solutions
Product
Catalog
www.havis.com 1-800-524-9900
Havis offers a wide variety of accessory products for use
with the DS-PAN-110 Series Docking Station.
For more information or to order please visit www.havis.com.
LPS-104
120W Power Supply
External power supply and cable for Panasonic CF-31
Toughbooks with cigarette lighter adaptor.
DS-DA-207
Card Reader Mounting Bracket
Mount an E-Seek Model 250 card reader to the side of the Docking Station.
(Bracket can be customized for other Card Reader Models)
DS-DA-601
Rugged Communications Hub
Rugged USB/Ethernet hub makes adding peripherals to your mobile
workspace easy and safe.
Havis, Inc.
75 Jacksonville Road, PO Box 2099
Warminster, PA 18974
47801 Anchor Court
Plymouth, MI 48170
www.havis.com 1-800-524-9900
Page: 1
www.havis.com • 1-800-524-9900
DS-PAN-111
DS-PAN-111-1
DS-PAN-111-2
DS-PAN-112
DS-PAN-112-1
DS-PAN-112-2
DS-PAN-113
Before Beginning (Original Instructions)
1 10
• NEVER STOW OR MOUNT THE DOCKING STATION DIRECTLY IN A VEHICLE
AIRBAG DEPLOYMENT ZONE.
• DO NOT USE COMPUTERWHILE DRIVING.
• READ ALL INSTRUCTIONSTHOROUGHLY BEFORE BEGINNING INSTALLATION.
• DO NOT MATE COMPUTERTO DOCKING STATION UNLESS COMPUTER’S DOCKING
CONNECTOR ACCESS DOOR IS FULLY OPEN OR DAMAGE MAY RESULT.
Havis is pleased to provide this Owner’s Manual to aid in the proper installation
and use of the DS-PAN-110 Series Docking Station for the Panasonic CF-30
& CF-31 laptop computers.
For questions regarding the set-up of your DS-PAN-110 Series Docking Station,
please contact Havis at 1-800-524-9900 or visit www.havis.com/CF31 for
additional product support and information.
This Owner’s Manual applies to the following Product Numbers:
• FOR PROPER SYSTEM FUNCTION,THIS DOCKING STATION SHOULD BE USED ONLYWITH
PANASONIC CF-30 AND CF-31 MODEL COMPUTERS. PANASONIC CF-29 AND EARLIER
MODELS ARE NOT COMPATIBLE.
• FOR PROPER SYSTEM FUNCTION, PANASONIC RECOMMENDS USING A 120W POWER
SUPPLY (LPS-104 OPTIONAL) WITH A CF-31 HIGH POWER (2.5GHz) COMPUTER.
• FOR CF-31 MEDIUM (2.4GHz) AND LOW (2.2 GHz) POWER COMPUTERS, A 90W POWER
SUPPLY (LPS-101 OPTIONAL) IS ACCEPTABLE, HOWEVER A 120W POWER SUPPLY
(LPS-104 OPTIONAL) MAY ALSO BE USED.
Installation of Power Supply (LPS-101/LPS-104 - Optional)
1). Power off computer and ensure all cables are disconnected from computer.
2). Plug in both input and output cables (supplied with LPS-101/LPS-104)
into the Power Supply brick.
3). With the Docking Station right side up, drop (4) #6-32 screws (supplied
with LPS-101/LPS-104) through the holes in Docking Station as shown.
4). While supporting the (4) #6-32 screws, flip the Docking Station upside
down and place (1) flat washer over each of the (4) #6-32 screws.
5). Place the Power Supply brick over the (4) #6-32 screws ensuring that the
screws pass through all of the bosses on the Power Supply brick and the
cables are pointing in the direction shown.
6). Place the remaining (4) flat washers over each of the #6-32 screws and
hand start a #6-32 locking nut onto each of the screws.
7). Torque all (4) #6-32 locking nuts to 0.9 Nm (8.0 in-lbs) ±10% ensuring
that the #6-32 screws stayed properly aligned with the bosses of the
Power Supply brick.
8). Route the Power Supply output cable as shown and secure connector
to power input port on Docking Station. Be sure to coil and strain relieve
excess cabling.
9). Return to Installation & Cable Management Step #3 on Page 4.
NOTE: Refer to Page 1 to ensure that you have the appropriate Power Supply for your Specific computer model.
Input Cable
Output Cable
Page: 2
www.havis.com • 1-800-524-9900
Table of Contents
Zip Tie/Push Pin Information
9 2
Specifications
Parts Included
Port Replication Capability
Installation & Cable Management
Operation - Docking
Dock Indicator LED Diagnostics
Operation - Undocking
Zip Tie/Push Pin Information
Installation of Power Supply (LPS-101/LPS-104 - Optional)
2
3
3
4
7
8
8
9
10
Specifications
Power Supply Input 15.6V DC-In
Dimensions* 12.4” ( 31.5 cm) W x 11.9” ( 30.2 cm ) D x 4.0” ( 10.2 cm ) H
Weight* 4.6 lbs ( 2.1 kg )
Operating Environment 5° C to 35° C ( 41° F to 95°F )
Storage Environment -20° C to 60° C ( -4° F to 140° F )
* DS-PAN-111
1). In the event that a strain relieved cable needs to be removed or replaced,
do not attempt to remove entire Zip Tie/Push Pin. Cut Zip Tie as shown,
taking care to not damage the cables.
2). Pull the cut Zip Tie through the Push Pin housing. Trim excess so sharp
edge does not damage reinstalled cables.
Trim excess
3). Insert a new Zip Tie into the Push Pin housing and strain relieve cables.
Operation - Undocking (Continued)
3). Once unlatched grab both sides of computer and carefully lift out of
Docking Station, rear end first.
DECLARATION OF CONFORMITY FOR CE MARKING
Havis, Inc. declares that their DS-PAN-110 SERIES DOCKING STATIONS:
Are classified within the following EU Directives:
EU Electromagnetic Compatibility Directive 2004/108/EC
And further conform with the following EU Harmonized Standards:
EN 55022 (2006) + A1 2007, EN 55024 (1998) + A2: 2003
Dated: August 19, 2010
Position of signatory: Chief Information Officer / Chief Financial Officer
Name of signatory: Steve Ferraro
Signed:
• Do not place containers of liquid or metal objects on top of the Docking Station
• If a malfunction occurs, immediately unplug the Power Supply and remove the laptop
• Use only the specified Power Supply with this Docking Station
	 Recommended: Part # LPS-101 (90W) for CF-30, CF-31 Medium & Low Power Computers
	 Recommended: Part # LPS-104 (120W) for CF-31 High Power Computers
• Do not store the Docking Station where water, moisture, steam, dust, etc. are present
• Do not connect cables into ports other than what they are specified for
• Do not leave the Docking Station in a high temperature environment for a long period of time
(greater than +60°C, 140°F)
Precautions
Page: 3
www.havis.com • 1-800-524-9900
True Ethernet
RJ45
USB 2.0 Ethernet
RJ45
Parts Included
3 8
Docking Station
Forward Exiting Connectivity
Mounting Bracket
Hardware Kit
This Hardware Kit includes:
1. Zip Ties/Push Pins (2)
2. Keys (2)
3. 1/4”-20 Screws (7)
4. Zip Ties (6)
Tools required for installation:
• 5/32” Hex Drive
(For securing 1/4”-20 Screws)
Port Replication Capability
Headphone
Microphone
USB 2.0 (4)
+ Front USB 2.0 (1)
Serial (2)
VGA Wireless On/Off*
Power Input
Rearward Exiting Connectivity (Optional Single or Dual Antenna)
Antenna A Antenna B
5). For theft deterrence, secure computer by locking Docking Station with
supplied key.
6). Power on computer. The Dock Indicator LED will light up green to indicate
proper system function.
Operation - Docking (Continued)
Operation - Undocking
1). If previously locked, unlock Docking Station using supplied key.
2). Rotate Latch Handle clockwise to the “UNDOCK” position.
Latch Handle
Docking Connector
Brass Locator Pin
Front Hook
Brass Locator Tab
Front USB Port
Dock Indicator LED
Lock
Dock Indicator LED
DOCK INDICATOR LED DIAGNOSTICS:
GREEN: Computer docked, all ports ready for use.
ORANGE: USB and LAN ports are not functioning.
RED: Computer is not supported or a connection is not made.
RED (Blinking): Firmware error has occurred.
NOT LIT: Computer is not installed, is turned off, or in standby or sleep mode.
For CF-30 computers, WWAN pass-through can be controlled according to Wireless On/Off switch setting.
For CF-31 computers, WWAN will always function as pass-through regardless of switch setting.
* NOTE
Page: 4
www.havis.com • 1-800-524-9900
1). Ensure Docking Station is unlatched by positioning the Latch Handle
to the “UNDOCK” position.
2). With rear of computer elevated, load front of computer into Docking Station
by aligning Front Hook with the appropriate recess in the computer case.
3). Lower back of computer onto Brass Locator Pins.
4). Apply light downward pressure over rear of computer as indicated by
Arrow A and rotate Latch Handle counter-clockwise to the “DOCK” position.
7 4
Installation & Cable Management
1). Install the Mounting Bracket to the Motion Device using (3) 1/4“-20
screws (Hardware Kit Item 3). Torque screws to 13.4Nm (120 in-lbs) ± 10%.
NOTE: Numerous hole patterns present in Mounting Bracket should accommodate
most competitor’s motion devices.
1/4”-20 Screws
Mounting Bracket
Typical Motion Device Example
(not included)
Operation - Docking
• DO NOT MATE COMPUTERTO DOCKING STATION UNLESS COMPUTER’S DOCKING
CONNECTOR ACCESS DOOR IS FULLY OPEN OR DAMAGE MAY RESULT.
• DO NOT FORCE LAPTOP ONTO DOCKING STATION. IFTHERE IS RESISTANCE,
CHECK ALIGNMENT OF COMPUTER ON DOCKING STATION.
2). Orient the Docking Station in a position that is comfortable to work with.
3). Install all cables that are necessary for computing needs.
NOTE: If mounting Power Supply to Docking Station, go to Page 10 before completing Step 3
4). Use Zip Ties (Hardware Kit Item 4) to strain relieve cables to the Strain Relief
Loops at front of Docking Station.
NOTE:
Holes shown will
accept Zip Tie/Push Pins
(Hardware Kit Item 1)
for strain relieving
Antenna cables.
Page: 5
www.havis.com • 1-800-524-9900
5 6
Installation & Cable Management (Continued) Installation & Cable Management (Continued)
7). Tilt the Motion Device to a position allowing you access to the back side
of docking station and route cables out the side as shown.
8). Route cable bundle and tie off to Mounting Bracket with Zip Tie
(Hardware kit Item 4).
9). Create a service loop with cable bundle to ensure that no tension is on
the connectors and to enable intended range of motion.
10). Tie off cables onto a stationary part of the mounting system.
11). Position Docking Station as desired for use inside mobile workspace.
5). Gather all strain relieved cables into a single bundle and secure with Zip Ties
to facilitate routing in later installation steps.
6). Lower the Docking Station onto the Mounting Bracket as shown, being cautious
not to pinch the cable bundle. Secure with (4) 1/4”-20 screws (supplied).
Torque screws to 13.4 Nm (120 in-lbs) ± 10%.
NOTE: It is recommended to use a drop of medium strength (blue)
thread locking adhesive applied to the threads of all fasteners.
Tie off on stationary part
of the mounting system
(not included)
This loop must be large enough
to allow full range of expected
rotation and extension without
stressing connections.
1/4”-20 Screws
Page: 6
www.havis.com • 1-800-524-9900
5 6
Installation & Cable Management (Continued) Installation & Cable Management (Continued)
7). Tilt the Motion Device to a position allowing you access to the back side
of docking station and route cables out the side as shown.
8). Route cable bundle and tie off to Mounting Bracket with Zip Tie
(Hardware kit Item 4).
9). Create a service loop with cable bundle to ensure that no tension is on
the connectors and to enable intended range of motion.
10). Tie off cables onto a stationary part of the mounting system.
11). Position Docking Station as desired for use inside mobile workspace.
5). Gather all strain relieved cables into a single bundle and secure with Zip Ties
to facilitate routing in later installation steps.
6). Lower the Docking Station onto the Mounting Bracket as shown, being cautious
not to pinch the cable bundle. Secure with (4) 1/4”-20 screws (supplied).
Torque screws to 13.4 Nm (120 in-lbs) ± 10%.
NOTE: It is recommended to use a drop of medium strength (blue)
thread locking adhesive applied to the threads of all fasteners.
Tie off on stationary part
of the mounting system
(not included)
This loop must be large enough
to allow full range of expected
rotation and extension without
stressing connections.
1/4”-20 Screws
Page: 7
www.havis.com • 1-800-524-9900
1). Ensure Docking Station is unlatched by positioning the Latch Handle
to the “UNDOCK” position.
2). With rear of computer elevated, load front of computer into Docking Station
by aligning Front Hook with the appropriate recess in the computer case.
3). Lower back of computer onto Brass Locator Pins.
4). Apply light downward pressure over rear of computer as indicated by
Arrow A and rotate Latch Handle counter-clockwise to the “DOCK” position.
7 4
Installation & Cable Management
1). Install the Mounting Bracket to the Motion Device using (3) 1/4“-20
screws (Hardware Kit Item 3). Torque screws to 13.4Nm (120 in-lbs) ± 10%.
NOTE: Numerous hole patterns present in Mounting Bracket should accommodate
most competitor’s motion devices.
1/4”-20 Screws
Mounting Bracket
Typical Motion Device Example
(not included)
Operation - Docking
• DO NOT MATE COMPUTERTO DOCKING STATION UNLESS COMPUTER’S DOCKING
CONNECTOR ACCESS DOOR IS FULLY OPEN OR DAMAGE MAY RESULT.
• DO NOT FORCE LAPTOP ONTO DOCKING STATION. IFTHERE IS RESISTANCE,
CHECK ALIGNMENT OF COMPUTER ON DOCKING STATION.
2). Orient the Docking Station in a position that is comfortable to work with.
3). Install all cables that are necessary for computing needs.
NOTE: If mounting Power Supply to Docking Station, go to Page 10 before completing Step 3
4). Use Zip Ties (Hardware Kit Item 4) to strain relieve cables to the Strain Relief
Loops at front of Docking Station.
NOTE:
Holes shown will
accept Zip Tie/Push Pins
(Hardware Kit Item 1)
for strain relieving
Antenna cables.
Page: 8
www.havis.com • 1-800-524-9900
True Ethernet
RJ45
USB 2.0 Ethernet
RJ45
Parts Included
3 8
Docking Station
Forward Exiting Connectivity
Mounting Bracket
Hardware Kit
This Hardware Kit includes:
1. Zip Ties/Push Pins (2)
2. Keys (2)
3. 1/4”-20 Screws (7)
4. Zip Ties (6)
Tools required for installation:
• 5/32” Hex Drive
(For securing 1/4”-20 Screws)
Port Replication Capability
Headphone
Microphone
USB 2.0 (4)
+ Front USB 2.0 (1)
Serial (2)
VGA Wireless On/Off*
Power Input
Rearward Exiting Connectivity (Optional Single or Dual Antenna)
Antenna A Antenna B
5). For theft deterrence, secure computer by locking Docking Station with
supplied key.
6). Power on computer. The Dock Indicator LED will light up green to indicate
proper system function.
Operation - Docking (Continued)
Operation - Undocking
1). If previously locked, unlock Docking Station using supplied key.
2). Rotate Latch Handle clockwise to the “UNDOCK” position.
Latch Handle
Docking Connector
Brass Locator Pin
Front Hook
Brass Locator Tab
Front USB Port
Dock Indicator LED
Lock
Dock Indicator LED
DOCK INDICATOR LED DIAGNOSTICS:
GREEN: Computer docked, all ports ready for use.
ORANGE: USB and LAN ports are not functioning.
RED: Computer is not supported or a connection is not made.
RED (Blinking): Firmware error has occurred.
NOT LIT: Computer is not installed, is turned off, or in standby or sleep mode.
For CF-30 computers, WWAN pass-through can be controlled according to Wireless On/Off switch setting.
For CF-31 computers, WWAN will always function as pass-through regardless of switch setting.
* NOTE
Page: 9
www.havis.com • 1-800-524-9900
Table of Contents
Zip Tie/Push Pin Information
9 2
Specifications
Parts Included
Port Replication Capability
Installation & Cable Management
Operation - Docking
Dock Indicator LED Diagnostics
Operation - Undocking
Zip Tie/Push Pin Information
Installation of Power Supply (LPS-101/LPS-104 - Optional)
2
3
3
4
7
8
8
9
10
Specifications
Power Supply Input 15.6V DC-In
Dimensions* 12.4” ( 31.5 cm) W x 11.9” ( 30.2 cm ) D x 4.0” ( 10.2 cm ) H
Weight* 4.6 lbs ( 2.1 kg )
Operating Environment 5° C to 35° C ( 41° F to 95°F )
Storage Environment -20° C to 60° C ( -4° F to 140° F )
* DS-PAN-111
1). In the event that a strain relieved cable needs to be removed or replaced,
do not attempt to remove entire Zip Tie/Push Pin. Cut Zip Tie as shown,
taking care to not damage the cables.
2). Pull the cut Zip Tie through the Push Pin housing. Trim excess so sharp
edge does not damage reinstalled cables.
Trim excess
3). Insert a new Zip Tie into the Push Pin housing and strain relieve cables.
Operation - Undocking (Continued)
3). Once unlatched grab both sides of computer and carefully lift out of
Docking Station, rear end first.
DECLARATION OF CONFORMITY FOR CE MARKING
Havis, Inc. declares that their DS-PAN-110 SERIES DOCKING STATIONS:
Are classified within the following EU Directives:
EU Electromagnetic Compatibility Directive 2004/108/EC
And further conform with the following EU Harmonized Standards:
EN 55022 (2006) + A1 2007, EN 55024 (1998) + A2: 2003
Dated: August 19, 2010
Position of signatory: Chief Information Officer / Chief Financial Officer
Name of signatory: Steve Ferraro
Signed:
• Do not place containers of liquid or metal objects on top of the Docking Station
• If a malfunction occurs, immediately unplug the Power Supply and remove the laptop
• Use only the specified Power Supply with this Docking Station
	 Recommended: Part # LPS-101 (90W) for CF-30, CF-31 Medium & Low Power Computers
	 Recommended: Part # LPS-104 (120W) for CF-31 High Power Computers
• Do not store the Docking Station where water, moisture, steam, dust, etc. are present
• Do not connect cables into ports other than what they are specified for
• Do not leave the Docking Station in a high temperature environment for a long period of time
(greater than +60°C, 140°F)
Precautions
Page: 10
www.havis.com • 1-800-524-9900
DS-PAN-111
DS-PAN-111-1
DS-PAN-111-2
DS-PAN-112
DS-PAN-112-1
DS-PAN-112-2
DS-PAN-113
Before Beginning (Original Instructions)
1 10
• NEVER STOW OR MOUNT THE DOCKING STATION DIRECTLY IN A VEHICLE
AIRBAG DEPLOYMENT ZONE.
• DO NOT USE COMPUTERWHILE DRIVING.
• READ ALL INSTRUCTIONSTHOROUGHLY BEFORE BEGINNING INSTALLATION.
• DO NOT MATE COMPUTERTO DOCKING STATION UNLESS COMPUTER’S DOCKING
CONNECTOR ACCESS DOOR IS FULLY OPEN OR DAMAGE MAY RESULT.
Havis is pleased to provide this Owner’s Manual to aid in the proper installation
and use of the DS-PAN-110 Series Docking Station for the Panasonic CF-30
& CF-31 laptop computers.
For questions regarding the set-up of your DS-PAN-110 Series Docking Station,
please contact Havis at 1-800-524-9900 or visit www.havis.com/CF31 for
additional product support and information.
This Owner’s Manual applies to the following Product Numbers:
• FOR PROPER SYSTEM FUNCTION,THIS DOCKING STATION SHOULD BE USED ONLYWITH
PANASONIC CF-30 AND CF-31 MODEL COMPUTERS. PANASONIC CF-29 AND EARLIER
MODELS ARE NOT COMPATIBLE.
• FOR PROPER SYSTEM FUNCTION, PANASONIC RECOMMENDS USING A 120W POWER
SUPPLY (LPS-104 OPTIONAL) WITH A CF-31 HIGH POWER (2.5GHz) COMPUTER.
• FOR CF-31 MEDIUM (2.4GHz) AND LOW (2.2 GHz) POWER COMPUTERS, A 90W POWER
SUPPLY (LPS-101 OPTIONAL) IS ACCEPTABLE, HOWEVER A 120W POWER SUPPLY
(LPS-104 OPTIONAL) MAY ALSO BE USED.
Installation of Power Supply (LPS-101/LPS-104 - Optional)
1). Power off computer and ensure all cables are disconnected from computer.
2). Plug in both input and output cables (supplied with LPS-101/LPS-104)
into the Power Supply brick.
3). With the Docking Station right side up, drop (4) #6-32 screws (supplied
with LPS-101/LPS-104) through the holes in Docking Station as shown.
4). While supporting the (4) #6-32 screws, flip the Docking Station upside
down and place (1) flat washer over each of the (4) #6-32 screws.
5). Place the Power Supply brick over the (4) #6-32 screws ensuring that the
screws pass through all of the bosses on the Power Supply brick and the
cables are pointing in the direction shown.
6). Place the remaining (4) flat washers over each of the #6-32 screws and
hand start a #6-32 locking nut onto each of the screws.
7). Torque all (4) #6-32 locking nuts to 0.9 Nm (8.0 in-lbs) ±10% ensuring
that the #6-32 screws stayed properly aligned with the bosses of the
Power Supply brick.
8). Route the Power Supply output cable as shown and secure connector
to power input port on Docking Station. Be sure to coil and strain relieve
excess cabling.
9). Return to Installation & Cable Management Step #3 on Page 4.
NOTE: Refer to Page 1 to ensure that you have the appropriate Power Supply for your Specific computer model.
Input Cable
Output Cable
Page: 11
DS-DA-409
Screen Stiffener
Secure your laptop screen to prevent excess wear and reduce
vibration while in use.
DS-DA-102
USB Powered Keyboard Light
Soft red LED light illuminates the laptop keyboard for night viewing.
DS-PAN-110 Series
Havis Rugged Mobile Docking Station
For Panasonic CF-30&CF-31Toughbooks
DS-PAN-110-SERIES-OMN_1-12
www.havis.com
1-800-524-9900
Owner’s Manual
DS-PAN-111
DS-PAN-111-1
DS-PAN-111-2
DS-PAN-112
DS-PAN-112-1
DS-PAN-112-2
DS-PAN-113
Interactive Online Catalog
Related Products
This new and exciting interactive catalog is an easy
to use, full color, online version of our printed catalog.
Visit www.haviscatalog.com for direct access
to the Interactive Catalog!
Mounting Solutions Computing Solutions Power Management
Solutions
Transport Solutions Lighting Solutions
Product
Catalog
www.havis.com 1-800-524-9900
Havis offers a wide variety of accessory products for use
with the DS-PAN-110 Series Docking Station.
For more information or to order please visit www.havis.com.
LPS-104
120W Power Supply
External power supply and cable for Panasonic CF-31
Toughbooks with cigarette lighter adaptor.
DS-DA-207
Card Reader Mounting Bracket
Mount an E-Seek Model 250 card reader to the side of the Docking Station.
(Bracket can be customized for other Card Reader Models)
DS-DA-601
Rugged Communications Hub
Rugged USB/Ethernet hub makes adding peripherals to your mobile
workspace easy and safe.
Havis, Inc.
75 Jacksonville Road, PO Box 2099
Warminster, PA 18974
47801 Anchor Court
Plymouth, MI 48170
www.havis.com 1-800-524-9900

Question & answers

There are no questions about the Panasonic DS-PAN-112-1 yet.

Ask a question about the Panasonic DS-PAN-112-1

Have a question about the Panasonic DS-PAN-112-1 but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Panasonic DS-PAN-112-1. Please make sure that you describe your difficulty with the Panasonic DS-PAN-112-1 as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.