Venezia

Outdoorchef Venezia manual

Venezia

User manual for the Outdoorchef Venezia in German. This PDF manual has 176 pages.

Table of contents

Page: 1
4 c ( 8 5 ) 7 m 1 . ” with DVB-T and DVD VENEZIA
Page: 2
Deutsch 39 100-240V~ 50/60Hz 170(H)/160(V) 1000:1 18.5 Zoll 0.3(H) x 0.3(V) This appliance complies with European Safety and Electrical directives. It fullfils the following EU regulations: EN55013:2001+A1:2003+A2:2006 EN55020: 2007 EN61000-3-2: 2006 EN61000-3-3:1995+A1:2001+A2:2005 EN55022:2006(CLASS-A) EN55024:1998+A1:2001+A2:2003 Manufacturer: Schmid Electronics GmbH In Dürrfeldslach 3 D-66780 Rehlingen-Siersburg (Deutschland) Fon: +49(0)6835 92350-0 Fax: +49(0)6835 92350-500
Page: 3
Important safety instructions................................................. What's included with your TV................................................ Sockets on the back of your TV............................................. Remote Control Instruction.................................................... Your TV's specification.......................................................... If you're having problems...................................................... Basic menu operation............................................................. Select Input Source................................................................ Setting up and using your TV................................................ Contents Wall mounting operation.......................................................... Quick Installation Guide......................................................... 1 2 5 7 8 9 13 13 37 39 40 ENGLISH DVD operation........................................................................... 31
Page: 4
First Time Installation ENGLISH 1 Country Press ▼/▲ button and then use ◄/► to select the country which you live in. Language Press ▼/▲ button and then use ◄/► to select the OSD language. The language you choose will be used in the following settles. Delete Program Press ▼/▲ button and then use ◄/► to select whether to delete all the programs. Search Program Press ▼/▲ button and then use ◄/► to select whether to start searching programs. The channel search setting can be found in the AUTO TUNING part. Picture Mode Press ▼/▲ button and then use ◄/► to select preferred picture mode. We recommend you to use the presetting. Sound Mode Press ▼/▲ button and then use ◄/► to select preferred sound mode. We recommend you to use the presetting. Press ▼/▲ button and then use ◄/► to select Yes then press OK button to confirm. If you changed the presetting for the sound or picture mode the following menu will appear. Press ▼/▲ button and then use ◄/► to select Yes, if you want to keep the settings for the automatic program search. Then press OK button to confirm starting the automatic program search or select No and press the OK button to get back to previous menu. If you select No in the first menu, this menu will appear. Use ◄/► to select Yes then press OK button to confirm exit. The first time installation then gets deactivated. Note: After this selection the user guidance for the first time installation is not available anymore. Please refer to the description in this instruction book of how to automatically program ATV and DTV. Use ◄/► to select No then press OK button to return to first menu. Use ◄/► to select Do It Next Time the press OK button exit, it will remind you whether to set the first time installation when the TV is powered on next time.
Page: 5
Important safety instructions Warning Do not let your TV become wet(for example, by keeping it in a damp room, leaving it outside or dripping water on it). You must not put objects filled with water on your TV (including vases of water). 2.Keep these instructions in a safe place. 4.Do not put your TV near water. 5.Only clean your TV with a dry cloth. 3.Follow all the instructions. 6.Do not block the ventilation openings. 7.Do not put your TV near any heat source (such as radiators or stoves), or near equipment (including amplifiers) that produce heat. 8.Your TV is either fitted with a polarised plug or grounding-type plug. A polarised plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, ask an electrician to replace your plug socket so that it fits your TV plug. 9.Do not walk on, trap,pinch or damage the power cord. Take care that the cord is not pulled, especially at plug sockets and where it comes out of the TV. 10.Only use attachments and accessories (included with your TV)that we have approved. 1.Read these instructions carefully. ENGLISH 2
Page: 6
Important safety instructions 11.Only use TV trolleys,stands,tripods or tables that we approve. If you use a trolley/table with your TV, be careful when you move it.So that it doesn't tip over. 12.Unplug your TV both power and antenna during lightning storms or when you won't be using it for a week or more. 13.If your TV needs repairing, use a qualified service technician. If you damage your TV, it will need to be serviced. 14.Be careful when you plug the power cord into a socket. Do not overload wall sockets. They could damage your TV and could give you an electric shock or cause a fire. Check your TV's power cord from time to time, and unplug your TV if the power cord looks worn. Stop using it until you have had the power cord replaced by a qualified technician.Do not twist, kink or pinch the power cord. 15.Disposing of your TV. The fluorescent lamp inside your TV has a small amount of mercury in it. Phone your local council to find out where your nearest recycling centre is located to ensure the TV is scrapped in compliance with UK & EU regulations. Note -If your TV is cold, there may be some small 'flickers' when you turn it on.This is normal and there is nothing wrong with your TV. -Avoid touching the LCD screen with any object or holding your finger against it as this may cause damage. ENGLISH 3
Page: 7
Important safety instructions You will see these stickers on your TV. This symbol means there are wires in your TV which are not insulated. If you touch these wires, you may get an electric shock. This symbol means you should read the servicing guide before you take further action. -You should not service your TV unless you are qualified to do so. If your TV breaks down, contact a qualified TV engineer. -Make sure you plug in your TV securely. -If you use your TV to play video games or connect to your computer to use as a screen, keep brightness and contrast at a low level. Images with a high level of brightness or contrast may burn on to the screen permanently. How to clean your TV 1 Wipe the TV screen with a soft, dry cloth 2 Do not use solvent methyl benzene. Strong chemicals may damage your TV screen. 3 Make sure you switch the TV off before you clean it. ENGLISH 4
Page: 8
Setting up and using your TV 1.Check the voltage shown on the serial number or rating label on your TV, and make sure your TV is compatible with the voltage in your home. If you are not sure about the voltage you have in your home, please contact your distributor or an electrician. 2.Make sure you plug the power cable into the socket securely. If you have problems plugging in your TV, please contact the shop you bought your TV from to replace the power cable. The plug is designed,so that it will only fit one way. If you have problems plugging in the socket properly, please contact the shop you bought your TV from. 1.Do not overload power sockets or extension cords when you are setting up your TV. If you overload the power sockets or extension cords, you could receive an electric shock or cause a fire. 2.Do not place any objects on the power cord when you are setting up your TV. Keep your TV screen away from any sharp objects such as screw drivers or knives so that you don't scratch or damage the TV screen. Only use the correct power cord when you set up your TV. 3.Make sure you turn off your TV when you are not using it. If you won't be using your TV for a week or more, unplug both power and aerial connections. 4.The vents at the back of your TV are to let air cool the inside of your TV,so it doesn't overheat. Please make sure the vents are not blocked. 5.Do not put your TV on a bed, sofa or carpet. This may block the vents. 6.Do not put your TV in an enclosed space, such as on a bookshelf or in a TV cabinet. Doing this may block the vents. 7.Keep your TV away from direct sunlight. 8.Do not place your TV on an unsteady shelf or desk. The TV could fall and injure you. 9.Do not put objects inside the TV (such as children's toys). Doing this could give you an electric shock or damage the parts inside your TV. When you must call a technician If any of the following happens, unplug your TV and contact the shop you bought your TV from or a qualified technician to repair your TV. 1.If the power cord or plug is damaged 2.If liquid gets into the screen 3.If your TV is damp or wet 4.If your TV is damaged 5.If the TV doesn't work properly. The temperatures your TV will work in Your TV will only work when the temperature is in the range of 0℃-40℃. ENGLISH 5
Page: 9
Setting up and using your TV Safety notice Your TV has a CE marking. This means your TV meets both the EMC directive (89/336/EEC), (93/68/EEC) and the Low Voltage Directive (73/23/EEC) that the European Community have issued. When you need to throw your TV away Please contact the shop that sold you your TV when you need to throw it away. 1.Do not throw your old TV away with your household waste. 2.You can also contact your local council to see if they can collect your old TV. If you throw your TV away at a landfill site,dangerous chemicals from your TV can leak into the ground and get into the food chain. 3.When you replace your TV with a new one, the shop who sold you your TV are legally responsible for taking your old TV and throwing it away. Do not try to repair your TV yourself. There is high voltage inside it and you could receive an electric shock. ENGLISH 6
Page: 10
What your TV should look like What is included with your TV How to use your remote control 1.Take the back cover off your TV remote and put two AAA batteries into the remote control. Make sure the + and - symbols on your batteries match the diagram. 2.Replace the batteries. So they are facing the right way.If you won't be using the remote control for a long time,take the batteries out. Use your remote control carefully. Do not drop.Keep the remote control away from water, direct sunlight and hot surfaces. What is included with your TV What is included with your TV User guide Power cord Screw Driver and screws Remote control User Manual ENGLISH 7
Page: 11
Sockets on the back of your TV 1 Remote Sensor Power Indicator 1. AC100-240V~ : Main power input. 2. HDMI: Connect to the HDMI output of your DVD. 3. VGA: Connect a computer to this jack. 4. PC AUDIO: Connect to the audio output jack of PC. 5. VIDEO: Connect to the VIDEO output jack of the DVD. 6. YPbPr: Connect to the YPbPr output jack of the DVD. 7. R/L: Connect to the audio output of your DVD.(VIDEO/YPbPr) 8. USB port 9. SCART: Connect to the SCART jack of DVD. 10. RF: Connect the antenna. 11. Headphone: Earphone output. 12. Coax: Connect to the Coaxial input for your Amplifier. ENGLISH 8
Page: 12
ENGLISH 9 Remote control instruction in TV mode STANDBY Turn the TV ON or OFF. PMODE Press repeatedly to cycle through the available video picture modes. SMODE Press to cycle through the different sound settings. SLEEP Select amount of time. Let your TV turn off automatically. MUTE Press to mute the sound. Press again or press V+ to un-mute the TV. SOURCE Press to cycle through the input source in following: NUMBER BUTTONS Press 0-9 to select a TV channel directly when you are watching TV. The channel change after 2 seconds. Return to the previous channel viewed. MENU Brings up the main TV menu to the screen. EXIT Exit the main TV menu to the screen. DISPLAY Press to display the source and channel's information. THUMBSTICK(▲/ ▼/◄ /►/ OK ENTER ) Allows you to navigate the on-screen menus and adjust the system settings to your preference. VOL+/VOL- Press to increase/decrease the sound level. CH+/CH- Press to scan through channels. I/II Press to search the NICAM modes. ASPECT Press to change the screen scale. 10 10+ MEDIA EPG FAV FAV Press to increase/decrease your favourite program.
Page: 13
ENGLISH 10 Remote control instruction in TELETEXT mode TEXT Press to switch between TV and Teletext mode. COLOUR BUTTONS Select 4 Preferred TELETEXT page. NUMBER BUTTONS Press 0-9 to select a teletext page. HOLD Freeze the current page. REVEAL Reveal or hide the hidden words. SIZE Change the picture size. SUBPAGE TELETEXT Subpage. INDEX Request index page when index link is valid. MIX TV and TXT pictures are mixed together in transparent background. 0 1 0 1 + MEDIA EPG FAV
Page: 14
ENGLISH 11 Remote control instruction in DTV mode MEDIA MEDIA Press to select MEDIA mode. EPG FAV EPG Launches the EPG (Electronic Program Guide) in DTV mode. .
Page: 15
TV INFORMATION Press DISPLAY button. Show topics when you enter TV mode without scan program. You will see the TV information just as the picture in the right which include the CHANNEL COLOR SYSTEM and SOUND SYSTEM you have chosen in the MANUAL TUNING. PICTURE MENU Press MENU button to display the main menu. 1. Press button to select PICTURE in the main menu, press button to enter the submenu. q / p u 2. Press button to select the option that you want to adjust in the PICTURE menu. q / p 3. Press button to adjust。 t / u 4. When you are satisfied with your adjustment, press the MENU button to return to the previous menu 。 Picture Model Select Picture Mode in PICTURE menu. DTV TV DVD AV SCART YPBPR HDMI PC MEDIA SOURCE Press SOURCE button to display the source list. Press q /p button to select the source you want to watch. Press OK/ENTER button to enter the source. SELECT INPUT SOURCE SELECT INPUT SOURCE ENGLISH 13 COLOUR TINT COLOUR TEMPERATURE
Page: 16
Available picture mode: Personal: You can adjust the Brightness ,Contrast, Colour, Sharpness to your own taste. Standard:A normal use mode which usually used in a unchangeable light environment. Movie: This mode is better used in a dark environment. The brightness is higher than other modes. Mild:This mode is better used in a place which is bright ,the brightness,colour and sharpness are lower than those of other modes . Game:Usually used when you play games ,the brightness is just lower than that of MOVIE mode. If you change the value of Brightness, Contrast, Colour, or Sharpness on the picture menu, the picture mode will be changed to "Personal" automatically. EASY WAY:You may select the picture mode directly by pressing PMODE button repeatedly. . Brightness Press button and then use to adjust the brightness of the picture. q / p t / u After adjust the value you want, press MENU button to return to the preview MENU. Contrast Press button and then use to adjust the contrast of the picture . q / p t / u Colour Press button and then use to adjust the colour saturation . q / p t / u NOTE: This option is invalid in PC mode, and it will be shown in gray. Sharpness Press button and then use to adjust the sharpness of your TV. The suitable q / p t / u sharpness can make the picture look more clearer. Tint Press button and then use to adjust the tone of colour when your system is in NTSC. q / p t / u Color temperature Press button and then use to adjust the. optimum colour temperature mode to suit q / p t / u your eyes for viewing .The picture looks more brighter when the COLOUR TEMPERATURE is higher. ENGLISH 14 Contrast 50
Page: 17
SOUND MENU Press MENU button to display the main menu. 1. Press button to select SOUND in the main menu, press button to enter the submenu. q / p u 2. Press the button to select the option that you want to adjust in the SOUND menu. q / p 3. Press the button to adjust. t / u 4. When you are satisfied with your adjustment, press the MENU button to return to the previous menu. Sound mode Select Sound Mode in SOUND menu. If you change the value of Bass and Treble on the Sound menu, the sound mode will be changed to "Persona” automatically. EASY WAY: You can press SMODE button repeatedly. on the remote control to select the Sound Mode directly. BASS Press button and then use to increase or decrease q / p t / u the level of the lower-pitched sounds. TREBLE Press button and then use to increase or decrease the level of the higher-pitched q / p t / u sounds. BALANCE Press button and then use to adjust the audio output between left and right speakers. q / p t / u ENGLISH 15
Page: 18
FUNCTION MENU Press MENU button on to display the main menu. 1. Press button to select FUNCTION in the main menu, press button to enter the submenu. q / p u 2. Press the button to select your option what you want to adjust in the FUNCTION menu. q / p 3. Press the button to adjust t / u 4. When you are satisfied with your adjustment, press the MENU button to return to the previous menu or press the EXIT button to exit the main menu. LANGUAGE Use to select the language in the language menu .It also can be selected in the t / u First Time Installation. VIDEO SIZE This option allows you to select the screen display mode which best corresponds to your viewing requirements. Note: The available aspect mode may be different in different input signal. TT LANGUAGE Use to select TT(Teletext) Language. t / u SLEEP TIMER Select the sleep time to put automatically the TV in standby mode,for example, the TV will be in standy mode 30min after you set the SLEEP TIMER 30 min.Timer can be selected as 0min(off) to120min. EASY WAY: You can select the sleep time by pressing SLEEP button repeatedly. OSD TIMER: You can select the time when the OSD display on the screen from 5Sec to 60 sec. BLUE SCREEN: This option allows you to select the blue background on or off. If on, the screen background will turn blue at very weak or no signal condition RESET : Press ENTER or ► button to reset the TV to the factory default. ENGLISH 16 VIDEO SIZE SLEEP TIMER OSD TIMER FULL WESTEURO OFF 60 SECONDS ON
Page: 19
CHILD LOCK: Press ENTER or ► button to set the child lock. You need to enter the PIN code. If the Child lock is set “OFF”, and the default PIN code is empty, you can press ENTER button directly to enter. TIPS: Super user's (administrator's) password is 0000. ENGLISH 17 KEY LOCKED CHILD LOCK CHILD LOCK CHANGE CODE OFF OFF
Page: 20
Child Lock Press ► button to set the child lock. Key Lock Press ► button to set the key lock. Change Code Press ► button to enter Change Code menu. Installation Press ► button to open the first time installation menu, and the operation of this menu is in page 2. Note:If you set the CHILD LOCK “ON”, you can't enter the INSTALLATION(It's in gray). TV MENU Press MENU button to display the main menu. 1. Press button to select TV in the main menu, press ► button to enter the submenu. q / p 2. Press the button to select your option what you want to adjust in the TV menu. q / p 3. Press the button to adjust. t / u 4. When you are satisfied with your adjustment, press the MENU button to return to the previous menu or press the EXIT button to exit the main menu. ENGLISH 18 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ CHANGE CODE ENTER OLD PASSWORD ENTER NEW PASSWORD ENTER PASSWORD AGAIN NUMBER ENTER BACK CHILD LOCK INSTALLATION ENTER 0-9
Page: 21
COUNTRY This option allows you to select the country. AUTO TUNING This option allows you to tune the channels that can be received automatically. Note: Before you perform Auto Tuning, you must choose the country where you are by selecting COUNTRY option Press ENTER key to start. You can see the child lock if you set the child lock “ON” before, press enter password 0000 and choose “Yes”, Press MENU to cancel and NO to back. ENGLISH 19 TV TV AUTO TUNING CHANNEL 0(UHF.545.00MHz) 10% COUNTRY TV UK
Page: 22
You can press MENU button to stop auto tuning and close the OSD menu . MANUAL TUNING : This option allows you to perform Manual Tuning. Press to select the suitable option. t / u This option has two functions: 1. Set the frequency of channel for AFT option. 2. Press ► button to select "ON” and it will start auto tuning from this frequency. Note: Before you perform Manual Tuning, you must choose the country where you are by selecting Country option in the FUNCTION menu. Press to perform your selection, Press the password 0000 to enter the CHANNEL q / p menu. the menu of Manual tuning will display on the screen. Channel Press to select Manual tuning in TV menu. t / u Sound System Press to select a corresponding sound system. t / u Colour System Press to select a corresponding colour system. t / u AFT(auto fine tune) Due to weak signals or a wrong antenna configuration, some of the channels may not be tuned to the best reception condition. AFT function allows you to fine tune channel selected(the frequency of channel is around the value in Manual Search option)。 CHANNEL EDIT : This function allows you to sort the TV programs according to your preferences, as following: ENGLISH 20 MANUAL TUNING AFT TV OFF
Page: 23
This option has four functions: 1、Press Green button to set the current channel to your favorite channel. If the current channel already be one of your favorite channel, press Green button again will set it to a normal channel. 2、Press blue button to set the current channel to lock. If the current channel already lock, press blue button again will unlock. 3、Press yellow button to skip the current channel. 4、Press button to select the channel in the list .Press ENTER button to display as follows: t / u Press button to select the location you would like to place the channel. q / p Input channel name”________”, Press button to select OK save and return back to the t / u previous menu. Press ENTER button to perform your selection. DTV MENU Press MENU button to display the main menu. 1. Press button to select PICTURE in the main menu, press ► button to enter the submenu. q / p 2. Press button to select the option that you want to adjust in the DTV menu. q / p 3. Press button to adjust。 t / u 4. When you are satisfied with your adjustment, press the MENU button to return to the previous menu 。 CH.MANAGE Press to select the CH.MANAGE and press ENTER to enter in. q / p : ENGLISH 21 CH.MANAGE DTV AREA AUTO TUNING MANUAL TUNING ADVANCED SETTING TIME UK
Page: 24
CH.ORGN : Press button to select CH.ORGN and press OK button to come to the q / p Channel Organizer Menu. 1、Press button to select the option that you want to adjust. q / p 2、Press RED button to label it as you favorite channel ; 3、Press GREEN button to delete the chosen channel ; 4、Press YELLOW button to move it to the number you want to sign it and then press q / p button to select other channel, and press OK button to confirm it; 5、Press BLUE button to LOCK the chosen channel (You need to press passward to watch the channel if you lock the channel) 6、Press button to set the channel name. t / u Press RED button to set the input out of number or Capital letters Press GREEN button to set the input out of Lowercase letters or Capital letters Press YELLOW button to the next position for your position. Press BLUE button to delete the input if you want to delete it. 7、Press EXIT or MENU button to out of the current page and back to the upper page. ENGLISH 22 ENTER EXIT Move/ Move OK Confirm
Page: 25
CH.SORT: Press button to select CH.SORT and press OK button to come to the Channel Sorting q / p menu. 1、Press button to select the language of your First Option; t / u 2、Press button to select All/Free or Scramble as your Second Option; q / p 3、Press button to select All/A toZ or Z to A. q / p 4、Press OK button to Confirm it. 5、Press RED button to the above page or GREEN button to the bottom page.The bottom page is the list of the channels you have set on the above page. 6、Press EXIT to come back to the previous menu. CH.GROUP: Press button to select CH.GROUP and press OK button to come to q / p The Channel Grouping Menu. 1. Press to select the channel which you want to edit and then select between 1 and 8 to assign the selected program to a group. You can see the specific group on the right side of the menu. 2. After successfully assigning the channel press ENTER / OK on your remote control to save your changes. 3. Press the MENU button to get back to the previous menu or EXIT to exit the menu. q / p ENGLISH 23
Page: 26
DEL TV CH Press button to select DEL TV CH and press OK button to come to the a Dialog box to q / p decide whether to delete or not. Press “NO” back to the previous page. DEL RADIO CH Press button to select DEL RADIO CH and press OK button to come to a Dialog box q / p to decide whether to delete or not. Press “NO” back to the previous page. AREA: Press button to select the suitable area. t / u AUTO TUNING: Press ENTER , then start channel search. ENGLISH 24 Channel Search S.No TV Channel S.No Radio Channel Channel 28UHF Progress
Page: 27
MANUAL TUNING: Press ENTER to set the Manual Tuning, use button to select the t / u channel to start the manual search. ADVANCED SETTING: Press ENTER or ► button to enter the menu. AUDIO: Press button to select the audio language t / u SUBTITLE: Press button to select the language of the subtitle t / u RATING: Press enter password”0000”, you will see the System setup menu. Press button to select the Parental Rating. q / p TIMER ENGLISH 25 DTV/ADVANCED SETTING AUDIO SUBTITLE RATING LCN GERMAN OFF ON
Page: 28
GMT Offset: Press ► button to come to right page, then press button to select the time q / p that you want to use .and press OK button to confirm it. Summer Time : Press buttonsettle the Summer Time on or off. t / u Press OK button to confirm it. NOTE: You can't select the Summer Time ON or OFF if you choose the GMT Offset “Auto”. PC PC MENU Press MENU button to display the main menu. H Position Press button to select the H Position, you can adjust the horizon position of the picture by q / p Pressing button. t / u V Position Press button to select the V Position, you can adjust the vertical position of the picture by q / p Pressing button. t / u PHASE Press button to select the PHASE, Press button to adjust the picture apply to the q / p t / u LCD(The picture will shake if the PHASE sets unsuitable) CLOCK Press button to select the CLOCK, Press button to adjust the signal's transfer speed q / p t / u to make the picture looks well. AUTO SYNC Press button to select the AUTO SYNC, Press ENTER button to adjust.This option can set q / p the above setting well automaticly. ENGLISH 26 MOVE ADJUST EXIT
Page: 29
HDMI/YPBPR: SETUP menu of HDMI input (for setting the HDMI picture position): PICTURE MENU, SOUND MENU and FUNCTION MENU are the same as those of TV mode. SCART : PICTURE MENU , SOUND MENU and FUNCTION MENU are the same as those of TV mode. ENGLISH 27 MOVE ADJUST EXIT
Page: 30
MEDIA Press SOURCE button and button to select the MEDIA in the Source menu,press enter q / p to enter in. Movie Press button to select Video and press OK button to enter in. Select the option you want t / u to play . Press Exit to back to the previous page. Music Press button to select Music and press OK button to enter in. Select the option you want t / u to play . Press Exit to back to the previous page Photo Press button to select Photo and press OK button to enter in. Select the option you t / u want to play . Press Exit to back to the previous page. ENGLISH 28 Move Confirm
Page: 31
Subtitle Press SUBTITLE button on your remote control to enter the Subtitle Menu. If this channel has no subtitle,you'll see the picture of subtitle. Press button to choose Off, subtitle. t / u Press button to choose type of subtitle. q / p Press OK button to confirm it. EPG Press EPG button on your remote control to enter the Daily Mode. Press Red button to enter the Daily Mode. Press Green button to enter the Weekly Mode. Press the blue button in the channel list to activate a reminder. The TV should not be switched off while a reminder is active and should be in DTV mode(source) until the reminder got activated. Note: A reminder is only available in DTV mode and the TV should be switched on for the reminder to be able to start. Only a previously non-activated reminder can be active. ENGLISH 29
Page: 32
Favourite LIST Press FAV button on your remote control to enter the Favourite List. Press button to choose the channel. q / p Press OK button to play what you choose. Multi audio Press AUDIO button on your remote control to enter the Multi audio. Press button to choose Left,Right,Stereo. t / u Press button to adjust. q / p Press OK button to confirm it. ENGLISH 30 Favourite LIST S.NO Channel Name Bid 1 Five Exit Multiaudio Multiaudio Exit
Page: 33
DVD Function General setup System Setup - Press buttons to move and highlight between different sub-menus. Press ENTER button to enter the highlighted sub-menu. ▲/▼ NTSC This format is used by some other countries, e.g. USA PAL This is the format used in UK for example. AUTO This format can be used if your is capable of both PAL and NTSC formats. DVD - Press button to exit the OSD menu. DVD SETUP - Press ► button to enter the and then press ▲ / ▼ to select one from below: TV SYSTEM TV SYSTEM SYSTEM SETUP ENGLISH 31
Page: 34
OFF: Choose this setting to cancel the screen saver TV TYPE DVD's are produced in a variety of screen aspect ratios. This menu enables you to select one of the three aspect ratios: 4:3 PS (Normal) 4:3 LB (Normal) 16:9 (Wide) - Select the most appropriate aspect ratio for the JPG being viewed. NOTE: - Playback screen size may vary according to the disc contents. - For media with 4:3 contents, using any mode would only display a 4:3 screen - Screen ratio selection should be according to the connected TV / Display aspect ratio. PASSWORD - The default setting is locked. No Rating selection or change password could be done. To edit the Rating setting, please enter default password “0000” using the numeric buttons, then press button to confirm. ENTER - To change password, input any 4 digit number when the lock is unlocked. Once the 4 digit number is entered, that will be your new password. SYSTEM SETUP SYSTEM SETUP SYSTEM SETUP ON: Choose this sertting to screen saver. ENGLISH 32
Page: 35
Rating restriction is divided into eight different category from KID NOTE: Only editable when password is unlocked. DEFAULT SETTING - Press button to restore factory default. ENTER POWER RESUME ON: Choose this setting to activate the power resume. OFF: Choose this setting to cancel the power resume. SYSTEM SETUP Note: The disc must support this function. ENGLISH 33
Page: 36
OSD LANGUAGE Use navigation buttons to select the OSD LANGUAGE setup icon, press ENTER button to confirm. There are Multi languages AUDIO LANGUAGE Use navigation buttons to select the setup icon, press button to confirm. There are for AUDIO LANG ENTER Multi languages your selection. Press ▲ / ▼ buttons to toggle between different languages. Press button to confirm. - ENTER SUBTITLE LANGUAGE Use navigation buttons to select the setup icon, press button to confirm. There are for your selection Press ▲ / ▼ buttons to toggle between different languages. Press button to confirm. SUBTITLE LANG ENTER ENTER Multi languages - . DUTCH DUTCH DUTCH DUTCH DUTCH DUTCH ENGLISH 34 OFF
Page: 37
Audio Setup TONE - Use the Up and Down arrow button to move the scroll and adjust the TONE. AUDIO SETUP AUDIO SETUP AUDIO SETUP TONE TONE TONE DUTCH DUTCH AUDIO SETUP AUDIO SETUP AUDIO SETUP TONE TONE TONE TONE AUDIO OUT AUDIO OUT AUDIO OUT AUDIO OUT SPDIF/OFF SPDIF/RAW SPDIF/PCM ENGLISH 35
Page: 38
- You can select four different audio output, STEREO, MONO L, MONO R, MIX MONO. The audio out description of these Selections is shown in the table below. MODE LEFT SPEAKER RIGHT SPEAKER STEREO STEREO-L STEREO-R L-MONO L-MONO L-MONO R-MONO R-MONO R-MONO MIX-MONO L-MONO+R-MONO L-MONO+R-MONO DUAL MONO - Switch the compress mode to “Audio output” to adjust the compress ratio for different effects. When selected FULL, the peak signal value is smallest. When selected OFF, the peak signal value is largest. ENGLISH 36
Page: 39
If you're having problems If you are having problems with your TV, carry out the following checks first. If you are still having problems, unplug your TV and contact the service centre. There is no sound and no picture coming from my TV. -Check that you have connected the TV power cord properly and switched the wall socket on. -Check that the power switch at the rear of the TV is set to "ON". -Check that you have turned on the POWER button on your TV. -Check the picture contrast and brightness setting. There is a normal picture but no sound coming from my TV. -Check that your TV is not muted or has the volume down. -Switch the channel, the problem may be with the channel you're on, not the TV. -Check that your audio cable input has been plugged in properly. If you are using an external a mplifier. The remote control does not work. -Check to see if there is any object between your TV (such as a piece of furniture) that could block the remote control from connecting with the sensor on your TV. -Have you put the batteries into the remote control the right way? ( So + to + and - to -) -Correct remote operating mode was set (such as TV or VCR). -The TV is not positioned in bright sunlight. -Try fitting new batteries if none of the above work. The TV has turned off suddenly. -Check that you have not set the sleep timer. -Check that you have not set the timer to control the socket which has your TV power cord on. -Check that you have not set auto standby with the broadcast signal source which is connected to your TV. The picture on my TV appears slowly after I have switched it on. This is normal. The image takes a few seconds to appear after you have switched the TV on. Please contact your service centre if picture has not appeared after five minutes. There is no or poor quality colour or a poor picture on my TV. -Change the colour setting on the PICTURE MENU. -Keep a distance between your TV and any VCR you may be using -Try watching another channel. The problem may be with the channel you're watching. -Are the video cables installed properly? -Change the setting of picture brightness on PICTURE MENU. There are horizontal and vertical bars on the screen, the picture is shaking. -Check if any signal interference activities is going on nearby, such as an electrical appliance or power tool is in operation. The reception is poor on some channels. -The TV channel you're watching may be having problems. Change to another channel and see if the same is happening. -TV broadcasting signal is weak or has been interrupted. -Check whether signal sources have any possible interference. There are lines or streaks on the pictures. -Check if there is any damage to the aerial on the roof, try to change the direction of the aerial to receive a better signal. One of the TV's speakers does not work. -Check the sound balance setting on SOUND MENU. Problems and how to fix them ENGLISH 37
Page: 40
If you're having problems Note: This page only refer to Video Graphics adaptor (VGA) problems. -Change the resolution,horizontal or vertical frequency of your source(PC etc.). -Check whether the signal cable is connected from the PC to your TV properly. -Check the signal input source is connected properly. There is a vertical bar or stripe on my TV screen. -Turn on the auto configure or change the horizontal or vertical frequency position. Screen colours aren't appearing as they should be or single colour. -Check if the video signal cable is connected properly. -Reinstall your PC video card if the signal source is from your computer. Maintaining your TV If you clean your TV carefully and regularly, it helps your TV to last longer. Make sure you turn the power off and unplug the power cord on your TV before you begin to clean it. Cleaning the screen 1.Here's a great way to keep the dust off your screen. Wet a soft cloth in a mixture of lukewarm water and a small amount of fabric softener or washing-up liquid. Wring the cloth until it's almost dry and then use it to wipe the screen. 2.Make sure there is no excess water on your TV when you have finished cleaning it. Cleaning the plastic parts of your TV Wipe the plastic parts of your TV with a soft, dry, lint-free cloth. Do not use a wet cloth. If you are going to be away for a while If you are not going to use your TV for a while (such as when you go on holiday), you should unplug the power cord from the socket and disconnect your aerial to protect your TV against possible damage from lightning or power surges. Problems and how to fix them The signal is out of range. ENGLISH 38 Disc playback picture is poor -The disc is dirty, clean the disc. Not playback disc -No disc is inserted, insert a playable disc. -Disc inserted in wrong direction, the label side should be face to you. -An unplayable disc is inserted, insert a playable disc (check the disc type, color system and regional code).
Page: 41
We want to improve our products all the time. We have the right to change the design and the specifications of this TV without telling you.The symbol below on the product or in the instructions means that you should throw your electrical and electronic equipment away separately from your household waste. There are separate collection systems for recycling in the European Union (EU). For more information, please contact your local authority or your retailer where you bought your TV. Your TV's specification Your TV's specification Your TV's specification 0.3(H)x0.3(V) 1366 x 768 16:9 16.7M colours 1000:1 250cd/m² 5 ms 170(H)/160(V) 2x3W 18.5 inch 100-240V~ 50/60Hz Panel This appliance complies with European Safety and Electrical directives. It fullfils the following EU regulations: EN55013:2001+A1:2003+A2:2006 EN55020: 2007 EN61000-3-2: 2006 EN61000-3-3:1995+A1:2001+A2:2005 EN55022:2006(CLASS-A) EN55024:1998+A1:2001+A2:2003 Manufacturer: Schmid Electronics GmbH In Dürrfeldslach 3 D-66780 Rehlingen-Siersburg (Deutschland) Fon: +49(0)6835 92350-0 Fax: +49(0)6835 92350-500 ENGLISH 39
Page: 42
Wall mounting operation Wall mounting operation Wall mounting operation Attach the stand To attach the stand, place the stand on the neck of the TV and push as shown below, then insert and tighten the Remove the Stand To remove the stand remove the screws in the circled area and the neck will come off. Mounting Specification 75mm 75mm Mounting Specification : 75mm x 75mm using screw size M4 (not supplied). Length of screw should not exceed 8mm. Please Note : The 8mm length of screw refers to how deep the screw can go inside the mounting holes. When you're buying screws, you should add the original 8mm to the thickness of your mounting plate in order to get the total screw length. The 2 screws in the package are for securing the TV stand only. If you are mounting the TV please consult a qualified installer for further instructions on bracket support and wall support. screws in the circled area. ENGLISH 40

Question & answers

Have a question about the Outdoorchef Venezia but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Outdoorchef Venezia. Please make sure that you describe your difficulty with the Outdoorchef Venezia as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.

Ask a question about the Outdoorchef Venezia

Name
Email
Reaction

View a manual of the Outdoorchef Venezia below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Outdoorchef
  • Product: Barbecues
  • Model/name: Venezia
  • Filetype: PDF
  • Available languages: Dutch, German, Italian, English, French, Norwegian, Swedish, Danish, Finnish