X-940

Olympus X-940 manual

X-940

User manual for the Olympus X-940 in English. This PDF manual has 61 pages.

Page: 1
DIGITAL CAMERA FE-4040/FE-4020/X-940 ● Thank you for purchasing an Olympus digital camera. Before you start to use your new camera, please read these instructions carefully to enjoy optimum performance and a longer service life. Keep this manual in a safe place for future reference. ● We recommend that you take test shots to get accustomed to your camera before taking important photographs. ● In the interest of continually improving our products, Olympus reserves the right to update or modify information contained in this manual. ● The screen and camera illustrations shown in this manual were produced during the development stages and may differ from the actual product. Unless otherwise specified, the explanation about these illustrations is provided for FE-4040. Instruction Manual
Page: 2
2 EN Contents Contents Step 5 Printing “Direct printing (PictBridge)” (p. 37) “Print Reservations (DPOF)” (p. 40) Step 4 How to Use the Camera “Camera Settings” (p. 3) Step 3 Shooting and Playing Back Images “Shooting, Viewing, and Erasing” (p. 14) Step 2 Preparing the Camera “Preparing the Camera” (p. 10) Names of Parts .............................. 6 Preparing the Camera ................. 10 Shooting, Viewing, and Erasing... 14 Using Shooting Modes................ 20 Using Shooting Functions.......... 23 Menus for Shooting Functions... 27 ¾ ¾ ¾ ¾ ¾ ¾ Menus for Playback, Editing, and Printing Functions....................... 30 Menus for Other Camera Settings ........................................ 32 Printing......................................... 37 Usage Tips ................................... 42 Appendix ...................................... 46 ¾ ¾ ¾ ¾ ¾ Step 1 Checking the contents of the box Other accessories not shown: Instruction Manual (this manual), warranty card. Contents may vary depending on purchase location. Digital camera Strap LI-70B Lithium Ion Battery AV cable USB cable ib CD-ROM F-2AC USB-AC adapter or
Page: 3
3 EN Camera Settings Using the Direct Buttons Using the Direct Buttons Frequently used functions can be accessed using the direct buttons. Shutter button (p. 14) Zoom buttons (p. 16) q button (switch between shooting and playback) (p. 15) m button (p. 4) E button (menu guide) (p. 19) Arrow pad H (left) G (down) / D button (erase) (p. 18) F (up) / INFO button (change information display) (p. 16, 19) I (right) H button (p. 12) The symbols FGHI displayed for image selections and settings indicate that the arrow pad is to be used. NORM OK SINGLE PRINT PRINT 4/30 4/30 MORE ’10/02/26 12:30 ’10/02/26 12:30 NORM 14M FILE 100 0004 100 0004 02 26 12 30 : . . 2010 OK SET X Y M D TIME MENU CANCEL Y/M/D Y/M/D
Page: 4
4 EN Using the Menu Using the Menu Use the menu to change camera settings such as the shooting mode. Press the m button to display the function menu. The function menu can be used to set frequently used shooting and playback functions such as shooting mode. PERFECT FIX EDIT ERASE SETUP SLIDESHOW SLIDESHOW Use FG to select a menu and press the H button. 4 4 P P 0.0 0.0 AUTO WB AUTO WB AUTO ISO AUTO ISO 14M PROGRAM AUTO PROGRAM AUTO Shooting Playback Selected option To select the shooting mode Use HI to select a shooting mode and press the H button. To select the function menu Use FG to select a menu and use HI to select a menu option. Press the H button to set the function menu. o [SETUP] menu Function menu Shooting mode In the [SETUP] menu, various camera functions can be set, including shooting and playback functions not displayed in the function menu, and other settings such as date, time and screen display. 1 Select [SETUP] and then press the H button. The [SETUP] menu is displayed. FINE ZOOM OFF R OFF AF MODE FACE/iESP MENU OK SET EXIT 1 2 3 ICON GUIDE IMAGE STABILIZER ON ON COMPRESSION COMPRESSION NORMAL NORMAL 2 Press H to highlight the page tabs. Use FG to select the desired page tab and press I. 1 2 3 OFF MENU OK SET EXIT POWER SAVE Page tab 1 2 3 MENU OK SET EXIT OFF OFF POWER SAVE POWER SAVE Submenu 1 3 Use FG to select the desired submenu 1 and then press the H button. 1 2 3 MENU OK SET EXIT POWER SAVE POWER SAVE OFF 1 2 3 OK SET MENU BACK OFF OFF POWER SAVE POWER SAVE POWER SAVE ON OFF OFF Submenu 2 ● 4 Use FG to select the desired submenu 2 and then press the H button. Once a setting is selected, the display returns to the previous screen. There may be additional operations. “Menu Settings” (p. 27 to 36) 1 2 3 MENU OK SET EXIT ON POWER SAVE POWER SAVE 5 Press the m button to complete the setting. Some functions cannot be used in some shooting modes. In such cases, the following message is displayed after setting. 1 2 3 FINE ZOOM OFF R OFF MENU OK AF MODE FACE/iESP COMPRESSION COMPRESSION NORMAL NORMAL SET EXIT ICON GUIDE IMAGE STABILIZER ON ON CONFLICTING SETTINGS ●
Page: 5
5 EN Menu Index Menus for Shooting Functions 1 Shooting mode P (PROGRAM AUTO).......p.14 M (iAUTO)....................p.20 N (DIS MODE)*1 .............p.20 s (SCENE MODE) ......p.20 P (MAGIC FILTER).....p.21 ~ (PANORAMA)...............p.22 A (MOVIE).......................p.15 2 Flash..................................p.23 3 Macro ................................p.23 4 Self-timer...........................p.24 5 Exposure compensation....p.24 6 White balance....................p.25 7 ISO ....................................p.25 8 Image size (Still images) ...p.26 9 o (SETUP) X z (Shooting)/A (Movie) IMAGE SIZE (Movies).......p.27 COMPRESSION (Still images) .......................................p.27 1 SLIDESHOW.....................p.30 2 PERFECT FIX ...................p.30 3 EDIT ..................................p.30 4 ERASE ..............................p.30 Menus for Playback, Editing, and Printing Functions 5 o (SETUP) X q (Playback) PRINT ORDER..................p.31 0 (Protect) .....................p.31 y (Rotate).........................p.31 R (Add sound to still images) .......................................p.31 4 4 P P 0.0 0.0 AUTO WB AUTO WB AUTO ISO AUTO ISO 14M PROGRAM AUTO PROGRAM AUTO PERFECT FIX EDIT ERASE SETUP SLIDESHOW SLIDESHOW 6 7 3 2 1 5 4 1 r (Settings 1) MEMORY FORMAT/ FORMAT............................p.32 BACKUP............................p.32 W (Language).................p.32 RESET...............................p.32 USB CONNECTION..........p.33 q POWER ON ................p.33 SAVE SETTINGS ..............p.33 Menus for Other Camera Settings 2 s (Settings 2) PW ON SETUP .................p.33 SOUND SETTINGS ..........p.34 PIXEL MAPPING...............p.34 s (Monitor) .....................p.34 X (Date/time)..................p.34 WORLD TIME....................p.35 VIDEO OUT.......................p.35 3 t (Settings 3) POWER SAVE...................p.36 FRAME RATE (Movies).....p.27 AF MODE..........................p.28 FINE ZOOM ......................p.28 IMAGE STABILIZER (Still images)*2 /IS MOVIE MODE (Movies).............................p.28 R (Still images)..................p.29 R (Movies).........................p.29 ICON GUIDE.....................p.29 8 9 1 2 3 FINE ZOOM OFF R ICON GUIDE OFF IMAGE STABILIZER ON ON AF MODE FACE/iESP COMPRESSION NORMAL MENU OK SET EXIT 5 1 2 3 IMAGE SIZE VGA IS MOVIE MODE OFF ON FRAME RATE 30fps MENU OK SET EXIT R 1 2 3 SAVE SETTINGS NO MENU OK SET EXIT BACKUP ENGLISH RESET USB CONNECTION W STORAGE q POWER ON NO FORMAT 3 2 1 3 2 1 4 1 2 3 MENU OK SET EXIT PRINT ORDER y 0 R *1 Available in the FE-4020/X-940 only. *2 Available in the FE-4040 only.
Page: 6
6 EN Names of Parts 1 Connector cover.......... p. 11, 12, 35, 37 2 Multi-connector ........... p. 11, 12, 35, 37 3 Strap eyelet.....................................p. 7 4 Battery/card compartment cover...p. 10 5 Self-timer lamp..............................p. 24 Camera unit 2 1 3 2 3 7 8 6 5 10 9 10 9 4 4 8 1 6 Flash .............................................p. 23 7 Lens ........................................p. 46, 59 8 Microphone .............................p. 29, 31 9 Speaker 10 Tripod socket FE-4020/X-940
Page: 7
7 EN 4 2 5 6 7 9 1 3 8 10 1 Shutter button ...............................p. 14 2 n button ........................p. 12, 14 3 q button (switch between shooting and playback)................................p. 15 4 Monitor....................................p. 14, 42 5 m button...................................p. 4 6 Zoom buttons................................p. 16 7 Indicator lamp ......................... p. 11, 12 8 H button (OK)..........................p. 3, 12 9 Arrow pad........................................p. 3 INFO button (change information display).............................p. 16, 19 D button (erase) ....................p. 18 10 E button (menu guide).................p. 19 Attaching the camera strap Pull the strap tight so that it does not come loose.
Page: 8
8 EN Monitor Shooting mode display 1/100 F2.6 F2.6 P P 1/100 4 4 NORM P P 0.0 0.0 AUTO WB AUTO WB AUTO ISO AUTO ISO 14M 0:34 0:34 ON ON 0.0 0.0 AUTO WB AUTO WB VGA ON ON 1 2 1 2 3 4 5 6 7 8 9 10 4 5 6 7 10 13 14 15 12 13 9 15 11 16 16 17 18 19 20 17 12 Still image Movie 1 Battery check ................................ p. 11 2 Shooting mode........................p. 14, 20 3 Flash .............................................p. 23 Flash standby/flash charge...........p. 42 4 Macro............................................p. 23 5 Self-timer.......................................p. 24 6 Exposure compensation ...............p. 24 7 White balance ...............................p. 25 8 ISO................................................p. 25 9 Image size...............................p. 26, 27 10 [SETUP] menu............................p. 4, 5 11 Recording with sound (movies) ....................................................p. 29 *1 Available in the FE-4040 only. 12 World time.....................................p. 35 13 Image stabilization (still images)*1 / Digital image stabilization (movies) ....................................................p. 28 14 Compression (still images)............p. 27 15 Number of storable pictures (still images) .........................................p. 14 Continuous recording length (movies) ....................................................p. 15 16 Current memory............................p. 48 17 AF target mark ..............................p. 14 18 Camera shake warning....................... - 19 Aperture value...............................p. 14 20 Shutter speed................................p. 14
Page: 9
9 EN Playback mode display Normal display 10 10 ’10/02/26 12:30 ’10/02/26 12:30 4/30 4/30 00:12/00:34 00:12/00:34 1 6 5 4 3 2 1 15 6 4 Still image Movie Detailed display 10 10 4/30 4/30 1/1000 F2.6 2.0 AUTO WB AUTO ISO P NORM 14M FILE 100 0004 ’10/02/26 12:30 1/1000 F2.6 2.0 AUTO WB AUTO ISO P NORM 14M FILE 100 0004 ’10/02/26 12:30 1 6 8 7 9 11 10 5 4 3 2 12 13 14 15 16 17 18 ● ● 1 Battery check ................................ p. 11 2 Print reservation/ number of prints...................p. 40/p. 39 3 Protect...........................................p. 31 4 Adding sound..........................p. 29, 31 5 Current memory............................p. 48 6 Frame number/total number of images (still images)..................................p. 16 Elapsed time/total recording time (movies) ........................................p. 17 7 Shooting mode........................p. 14, 20 8 Shutter speed................................p. 14 9 Aperture value...............................p. 14 10 ISO................................................p. 25 11 Exposure compensation ...............p. 24 12 White balance ...............................p. 25 13 Image size...............................p. 26, 27 14 File number......................................... - 15 Date and time................................p. 12 16 Compression (still images)............p. 27 Frame rate (movies)......................p. 27 17 Macro............................................p. 23 18 Flash .............................................p. 23
Page: 10
10 EN Preparing the Camera Insert the battery by putting in the ▼ marked side first, with the B (FE-4040)/ C (FE-4020/X-940) mark toward the battery lock knob. Damage to the battery exterior (scratches, etc.) may produce heat or an explosion. Insert the battery while sliding the battery lock knob in the direction of the arrow. Slide the battery lock knob in the direction of the arrow to unlock, and then remove the battery. Turn off the camera before opening the battery/card compartment cover. When using the camera, be sure to close the battery/card compartment cover. Insert the card straight until it clicks into place. Do not touch the contact area directly. 3 2 1 1 This camera allows the user to take pictures using the internal memory even when no SD/SDHC memory card (sold separately) is inserted. “Using an SD/SDHC memory card” (p. 47) “Number of storable pictures (still images)/ Continuous recording length (movies) in the internal memory and SD/SDHC memory cards” (p. 49) To remove the SD/SDHC memory card 1 2 Press the card in until it clicks and comes out slightly, then grab the card and pull it out. Inserting the battery and the SD/SDHC memory card (sold separately) Always use SD/SDHC memory cards with this camera. Do not insert any other types of memory card. 1 2 1 1 Battery/card compartment cover 2 Write-protect switch Contact area FE-4040 FE-4020/X-940 Battery lock knob
Page: 11
11 EN The battery is not fully charged at the time of purchase. Before use, be sure to charge the battery until the indicator lamp turns off (up to 3 hours). If the indicator lamp does not light, the camera is not correctly connected or the battery, camera, or AC adapter may be damaged. For details on the battery and the AC adapter, see “Battery and AC adapter (included)” (p. 46). When to charge the batteries Charge the battery when the error message shown below appears. Monitor top left Error message Flashes in red 4 4 BATTERY EMPTY Charging the battery with the supplied USB-AC adapter The included F-2AC USB-AC adapter (with an AC cable or plug-in type; hereafter referred to as AC adapter) differs depending on the region where you purchased the camera. If you received a plug-in type AC adapter, plug it directly into an AC outlet. The included AC adapter has been designed to be used only for charging. Make sure that operations such as shooting, viewing images and so on are not being used while the AC adapter is connected to the camera. Example: AC adapter with an AC cable 1 FE-4040 FE-4020/X-940 1 2 3 Multi-connector AC outlet Connector cover USB cable (supplied) 2 Indicator lamp On: Charging Off: Charged
Page: 12
12 EN Installing the supplied computer software (ib) After checking the system requirements, follow the instructions below to connect the camera to a computer and install the supplied computer software (ib). System requirements Windows XP (Service Pack 2 or later)/ Windows Vista/Windows 7 Connecting the camera FE-4040 FE-4020/X-940 Multi-connector Connector cover USB cable (supplied) Computer (on and running) Indicator lamp For information on using the computer software (ib), see the software’s online help. 1 Insert the supplied CD in a CD-ROM drive. A setup screen will appear on the computer monitor. If the setup window is not displayed, select “My Computer” (Windows XP) or “Computer” (Windows Vista/Windows 7) from the start menu. Double-click the icon for the CD-ROM drive to open the setup CD window and then double-click “CameraInitialSetup.exe”. ● 2 Connect the camera to the computer. 3 Follow the on-screen instructions on your computer. Operation guide Operation guides displayed at the bottom of the screen indicate that the m button, H button, or zoom buttons should be used. MENU OK SEL. IMAGE ERASE/CANCEL Operation guide OK SET 1 2 3 FINE ZOOM OFF R ICON GUIDE OFF IMAGE STABILIZER ON ON AF MODE FACE/iESP COMPRESSION NORMAL MENU OK SET EXIT Setting the date, time and time zone The date and time set here are saved to image file names, date prints, and other data. 1 Press the n button to turn on the camera. The date and time setting screen is displayed when the date and time are not set. X -- -- -- -- : . . Y/M/D MENU Y M D TIME CANCEL ---- ---- Date and time setting screen ●
Page: 13
13 EN 2 Use FG to select the year for [Y]. X : . . Y/M/D MENU Y M D TIME CANCEL 2010 2010 -- -- -- -- 3 Press I to save the setting for [Y]. : . . 2010 X Y/M/D MENU Y M D TIME CANCEL -- -- -- -- -- 4 As in Steps 2 and 3, use FGHI and the H button to set [M] (month), [D] (day), [TIME] (hours and minutes), and [Y/M/D] (date order). For a more accurate setting, press the H button when the time signal hits 00 seconds while setting the minutes. To change the date and time, adjust the setting from the menu. [X] (Date/time) (p. 34) 5 Use HI to select your home time zone and press the H button. Use FG to turn daylight saving time ([SUMMER]) on or off. ’10.02.26.12:30 SUMMER OK SET Seoul Tokyo Seoul Tokyo The menus can be used to change the selected time zone. [WORLD TIME] (p. 35) ● Changing the display language The language for the menu and error messages displayed on the monitor is adjustable. 1 Display the [SETUP] menu. “Using the Menu” (p. 4) 2 Use FG to select the r (Settings 1) tab and then press I. 1 2 3 MENU OK SET EXIT SAVE SETTINGS NO BACKUP ENGLISH RESET USB CONNECTION STORAGE q POWER ON NO W FORMAT FORMAT 3 Use FG to select [W] and press the H button. 4 Use FGHI to select your language and press the H button. 5 Press the m button.
Page: 14
14 EN Shooting, Viewing, and Erasing 2 Hold the camera and compose the shot. Horizontal grip Vertical grip Monitor When holding the camera, take care not to cover the flash with your fingers, etc. 3 Press the shutter button halfway down to focus on the subject. When the camera focuses on the subject, the exposure is locked (shutter speed and aperture value are displayed), and the AF target mark changes to green. The camera was unable to focus if the AF target mark flashes red. Try focusing again. P P 1/400 F2.6 1/400 F2.6 AF target mark Press halfway Shutter speed Aperture value “Focusing” (p. 44) ● ● Shooting with the optimum aperture value and shutter speed [PROGRAM AUTO] In this mode, automatic shooting settings are activated while also allowing changes to a wide range of other shooting menu functions, such as exposure compensation, white balance, etc. as needed. 1 Press the n button to turn on the camera. [PROGRAM AUTO] indicator 4 4 P P 0.0 0.0 AUTO WB AUTO WB AUTO ISO AUTO ISO 14M Number of storable still pictures (p. 49) Monitor (standby mode screen) If the [PROGRAM AUTO] indicator is not displayed, press the m button to display the function menu and then set the shooting mode to P. “Using the Menu” (p. 4) Current shooting mode display 4 4 P P 0.0 0.0 AUTO WB AUTO WB AUTO ISO AUTO ISO 14M PROGRAM AUTO PROGRAM AUTO Press the n button again to turn off the camera.
Page: 15
15 EN 4 To take the picture, gently press the shutter button all the way down while being careful not to shake the camera. P P 1/400 F2.6 1/400 F2.6 Image review screen Press fully To view images during shooting Pressing the q button enables playback of images. To return to shooting, either press the q button or press the shutter button halfway down. Shooting movies [MOVIE] 1 Press the m button to display the function menu screen. 4 4 0.0 0.0 AUTO WB AUTO WB AUTO ISO AUTO ISO 14M P P PROGRAM AUTO PROGRAM AUTO 2 Use HI to set the shooting mode to A and then press the H button. [MOVIE] indicator 0:34 0:34 0.0 0.0 AUTO WB AUTO WB VGA 3 Press the shutter button halfway down to focus on the subject, and gently press the button all the way down to start recording. 0:00 REC REC 0:34 0:00 0:34 0:00 REC REC 0:34 0:00 0:34 Lights up red when recording Current length Press halfway Press fully Continuous recording length (p. 49) 4 Gently press the shutter button all the way down to stop recording. Sound will also be recorded. During sound recording, only the digital zoom can be used. To record a movie with optical zoom, set [R] (movies) (p. 29) to [OFF].
Page: 16
16 EN Using the zoom Pressing the zoom buttons adjusts the shooting range. Pressing the wide (W) button Pressing the telephoto (T) button 4 4 P P 0.0 0.0 AUTO WB AUTO WB AUTO ISO AUTO ISO 14M 4 4 P P 0.0 0.0 AUTO WB AUTO WB AUTO ISO AUTO ISO 14M Zoom bar Optical zoom: 4x Digital zoom: 4x When shooting with the camera zoomed in, select [ON] for [IMAGE STABILIZER] (p. 28) (FE-4040) or select [DIS MODE] (p. 20) for the shooting mode (FE-4020/X-940). To take larger images without reducing image quality [FINE ZOOM] (p. 28) The zoom bar appearance identifies the status of the fine zoom/digital zoom. Fine zoom range Optical zoom range Digital zoom range When using optical zoom and digital zoom When using fine zoom Changing the shooting information display The display of the screen information can be changed to best match the situation, for example, the need for a clear view of the screen or for making a precise composition by using the grid display. 1 Press F (INFO). The displayed shooting information changes in the order shown below each time the button is pressed. “Shooting mode display” (p. 8) 4 4 P P 0.0 0.0 AUTO WB AUTO WB AUTO ISO AUTO ISO 14M 4 4 NORM P P 0.0 0.0 AUTO WB AUTO WB AUTO ISO AUTO ISO 14M Normal Detailed No information Viewing images 1 Press the q button. Number of frames/ Total number of images ’10/02/26 12:30 ’10/02/26 12:30 4/30 4/30 Playback image ●
Page: 17
17 EN Operations during movie playback 00:12/00:34 00:12/00:34 During playback Elapsed time/ Total recording time Pausing and resuming playback Press the H button to pause playback. To resume playback during pause, fast forward, or rewind, press the H button. Fast forward Press I to fast forward. Press I again to increase the fast forward speed. Rewind Press H to rewind. The rewinding speed increases each time H is pressed. Adjusting the volume Use FG to adjust the volume. Operations during pausing playback During pause 00:14/00:34 00:14/00:34 Cueing Press F to display the first frame and press G to display the last frame. Advancing and rewinding one frame at a time Press I or H to advance or rewind one frame at a time. Hold I or H pressed for continuous advance or rewind. Resuming playback Press the H button to resume playback. To stop movie playback Press the m button. 2 Use HI to select an image. Displays previous image Displays next image Hold I to fast forward and hold H to reverse. The display size of the images can be changed. “Index view and close-up view” (p. 18) To play sound recordings To play sound recorded with an image, select the image and press the H button. A ! icon appears on images with which sound has been recorded. [R] (still images) (p. 29, 31) During audio playback To play back movies Select a movie, and press the H button. ’10/02/26 12:30 ’10/02/26 12:30 4/30 4/30 OK MOVIE PLAY MOVIE PLAY Movie
Page: 18
18 EN Erasing images during playback (Single image erase) 1 Display the image you want to erase and press G (D). OK ERASE SEL. IMAGE ALL ERASE CANCEL CANCEL ERASE SET MENU BACK 2 Press FG to select [ERASE], and press the H button. [ALL ERASE] (p. 30) and [SEL. IMAGE] (p. 30) can be used to erase multiple images at the same time. Index view and close-up view Index view enables quick selection of a desired image. Close-up view (up to 10x magnification) allows checking of image details. 1 Press the zoom buttons. ’10/02/26 12:30 ’10/02/26 12:30 4/30 4/30 ’10/02/26 ’10/02/26 12:30 ’10/02/26 12:30 4/30 4/30 2 4 4 ’10/02/26 4 2 W T W T W T 2 2 4 Index view Single-image view Close-up view To select an image in index view Use FGHI to select an image, and press the H button to display the selected image in single-image view. To scroll an image in close-up view Use FGHI to move the viewing area.
Page: 19
19 EN Changing the image information display Shooting information settings displayed on the screen can be changed. 1 Press F (INFO). The displayed image information changes in the order shown below each time the button is pressed. 10 10 ’10/02/26 12:30 ’10/02/26 12:30 4/30 4/30 10 10 4/30 4/30 1/1000 F2.6 2.0 AUTO WB AUTO ISO P NORM 14M FILE 100 0004 ’10/02/26 12:30 Normal Detailed No information Using the menu guide If the E button is pressed while settings are being made in the playback function or [SETUP] menu, a description of the selected option is displayed. “Using the Menu” (p. 4) ●
Page: 20
20 EN Using Shooting Modes Reducing blur on shooting [DIS MODE] (FE-4020/X-940) This mode enables the user to reduce blur that is caused by camera shake and subject movement. 1 Set the shooting mode to N. 4 4 0.0 0.0 AUTO WB AUTO WB 14M [DIS MODE] indicator Using the best mode for the shooting scene [SCENE MODE] 1 Set the shooting mode to s. 4 4 SCENE MODE SCENE MODE 0.0 0.0 AUTO WB AUTO WB 14M 2 Press G to go to the submenu. 4 4 PORTRAIT PORTRAIT 0.0 0.0 AUTO WB AUTO WB 14M The shooting mode can be selected from the function menu in the following order: P, M, N (Available in the FE-4020/X-940 only), s, P, ~, and A. “Using the Menu” (p. 4) Shooting with automatic settings [iAUTO] According to the scene, the camera automatically selects the optimal shooting mode from [PORTRAIT]/[LANDSCAPE]/ [NIGHT+PORTRAIT]/[SPORT]/[MACRO]. This is a fully automatic mode that allows the user to take pictures using the best mode for the shooting scene simply by pressing the shutter button. 1 Set the shooting mode to M. 4 4 14M The icon changes depending on the scene that the camera automatically selects. In some cases, the camera may not select the desired shooting mode. When the camera cannot identify which is the optimal mode, [PROGRAM AUTO] will be selected.
Page: 21
21 EN 3 Use HI to select the best shooting mode for the scene, and press the H button. 4 4 0.0 0.0 AUTO WB AUTO WB 14M Icon indicating [SCENE MODE] that is set In [SCENE MODE], the optimum shooting settings are pre-programmed for specific shooting scenes. For this reason, some settings cannot be changed in some modes. Option Application BPORTRAIT/FLANDSCAPE/ GNIGHT SCENE*1 / MNIGHT+PORTRAIT/ CSPORT/NINDOOR/ WCANDLE*1 / RSELF PORTRAIT/ SSUNSET*1 /XFIREWORKS*1 / VCUISINE/dDOCUMENTS/ PET The camera takes a picture using the optimum settings for the scene conditions. *1 When the subject is dark, noise reduction is automatically activated. This approximately doubles the shooting time during which no other pictures can be taken. To take pictures of a moving subject like a pet ([ PET]) 1 Use HI to select [ PET], and press the H button to set. 2 Hold the camera to align the AF target mark on the subject and press the H button. When the camera recognizes the subject, the AF target mark automatically tracks the subject movement to focus on it continuously. “To focus on a moving subject continuously (AF Tracking)” (p. 28). ● Shooting with special effects [MAGIC FILTER] Add an artistic effect to your photo by selecting the desired magic filter. 1 Set the shooting mode to P. 4 4 MAGIC FILTER MAGIC FILTER 0.0 0.0 AUTO WB AUTO WB 14M 2 Press G to go to the submenu. POP ART 0.0 0.0 AUTO WB AUTO WB 14M 3 Use HI to select the desired effect and then press the H button to set. 4 4 0.0 0.0 AUTO WB AUTO WB 14M Icon indicating [MAGIC FILTER] that is set Shooting mode Option MAGIC FILTER [POP ART \PIN HOLE ]FISH EYE @DRAWING In [MAGIC FILTER], the optimum shooting settings are pre-programmed for each scene effect. For this reason, some settings cannot be changed in some modes.
Page: 22
22 EN Creating panoramic images [PANORAMA] Take pictures that can be joined to form a panorama using the ib computer software. The focus, exposure (p. 24), zoom position (p. 16), and white balance (p. 25) are locked at the first frame. The flash (p. 23) is fixed to $ (FLASH OFF) mode. 1 Set the shooting mode to ~. 4 4 0.0 0.0 AUTO WB AUTO WB 14M AUTO ISO AUTO ISO PANORAMA PANORAMA 2 Use FGHI to select the pan direction. 3 Press the shutter button to take the first frame, and then compose the second shot. 1 2 1 2 MENU EXIT 1 2 1 2 MENU BACK Before first shot After first shot After the first shot, the area shown in the white frame reappears on the side of the display opposite the pan direction. Frame subsequent photographs so that they overlap with the image on the monitor. 4 Repeat Step 3 until the number of desired frames is taken, and then press the m button when finished. Panorama shooting is possible for up to 10 frames. For information on making panoramas, refer to the online help for the ib computer software. ●
Page: 23
23 EN Using Shooting Functions Shooting closeups (Macro shooting) This function enables the camera to focus and shoot subjects at close distances. 1 Select the macro option in the shooting function menu. 4 4 P P 0.0 0.0 AUTO WB AUTO WB AUTO ISO AUTO ISO 14M OFF OFF 2 Use HI to select the setting option, and press the H button to set. Option Description OFF Macro mode is deactivated. MACRO This enables shooting as close as 20 cm/7.9 in.*1 (60 cm/23.6 in.*2 ) to the subject. SUPER MACRO*3 This enables shooting as close as 4 cm/1.6 in. to the subject. *1 When the zoom is at the widest (W) position. *2 When the zoom is at the most telephoto (T) position. *3 The zoom is automatically fixed. The flash (p. 23) and zoom (p. 16) cannot be set during super macro shooting. “Using the Menu” (p. 4) Using the flash The flash functions can be selected to best match the shooting conditions. 1 Select the flash option in the shooting function menu. 4 4 P P 0.0 0.0 AUTO WB AUTO WB AUTO ISO AUTO ISO 14M FLASH AUTO FLASH AUTO 2 Use HI to select the setting option, and press the H button to set. Option Description FLASH AUTO The flash fires automatically in low-light or backlight conditions. REDEYE Pre-flashes are emitted to reduce the occurrence of red eye in your photos. FILL IN The flash fires regardless of the available light. FLASH OFF The flash does not fire.
Page: 24
24 EN Using the self-timer After the shutter button is pressed all the way down, the picture is taken after a short delay. 1 Select the self-timer option in the shooting function menu. 4 4 P P 0.0 0.0 AUTO WB AUTO WB AUTO ISO AUTO ISO 14M 12 12 2 2 Y OFF Y OFF 2 Use HI to select the setting option, and press the H button to set. Option Description Y OFF The self-timer is deactivated. Y 12 SEC The self-timer lamp turns on for approx. 10 seconds, then blinks for approx. 2 seconds, and then the picture is taken. Y 2 SEC The self-timer lamp blinks for approx. 2 seconds, and then the picture is taken. Self-timer shooting is automatically canceled after one shot. To cancel the self-timer after it starts Press the m button. Adjusting the brightness (Exposure compensation) The standard brightness (appropriate exposure) set by the camera based on the shooting mode (except for [iAUTO]) can be adjusted brighter or darker to obtain a desired shot. 1 Select the exposure compensation option in the shooting function menu. 0.0 0.3 0.3 0.0 0.0 0.3 0.3 AUTO WB AUTO WB AUTO ISO AUTO ISO 14M P P 2 Use HI to select the desired brightness, and press the H button.
Page: 25
25 EN Adjusting to a natural color scheme (White balance) For more natural coloring, choose a white balance option suited to the scene. 1 Select the white balance option in the shooting function menu. WB AUTO 0.0 0.0 AUTO WB AUTO WB AUTO ISO AUTO ISO 14M P P 2 Use HI to select the setting option, and press the H button to set. Option Description WB AUTO The camera automatically adjusts the white balance according to the shooting scene. 5 For shooting outdoors under a clear sky 3 For shooting outdoors under a cloudy sky 1 For shooting under tungsten lighting w For shooting under daylight fluorescent lighting (household lighting, etc.) x For shooting under neutral fluorescent lighting (desk lamps, etc.) y For shooting under white fluorescent lighting (offices, etc.) Selecting the ISO sensitivity Abbreviation for the International Organization for Standardization. ISO standards specify the sensitivity for digital cameras and film, thus codes such as “ISO 100” are used to represent sensitivity. In the ISO setting, although smaller values result in less sensitivity, sharp images can be taken under fully lit conditions. Larger values result in higher sensitivity, and images can be taken at fast shutter speeds even under low light conditions. However, high sensitivity introduces noise into the resulting picture, which may give it a grainy appearance. 1 Select the ISO setting option in the shooting function menu. P P 0.0 0.0 AUTO WB AUTO WB 400 ISO ISO 200 ISO ISO 100 ISO ISO 14M ISO 200 1/400 F2.6 1/400 F2.6 400 200 100 ISO 200 2 Use HI to select the setting option, and press the H button to set. Option Description ISO AUTO The camera automatically adjusts the sensitivity according to the shooting scene. HIGH ISO AUTO*1 The camera automatically adjusts to a higher sensitivity than [ISO AUTO] to reduce blurring caused by camera shake and motion of the subject. 100/200/400/ 800/1600 The ISO sensitivity is fixed to the selected value. *1 Available in the FE-4040 only.
Page: 26
26 EN Selecting the size of still images 1 Select the image size option in the shooting function menu. P P 0.0 0.0 AUTO WB AUTO WB AUTO ISO AUTO ISO 8 4 4 M 14M 16:9S 14M 14M 2 Use HI to select the setting option, and press the H button to set. Option Description 14M (4288×3216) Suitable for printing A3 (11×17 in.) pictures. 8M (3264×2448) Suitable for printing pictures up to A3 (11×17 in.). 5M (2560×1920) Suitable for printing A4 (8.5×11 in.) pictures. 3M (2048×1536) Suitable for printing pictures up to A4 (8.5×11 in.). 2M (1600×1200) Suitable for printing A5 (5×7 in.) pictures. 1M (1280×960) Suitable for printing pictures at postcard size. VGA (640×480) Suitable for viewing pictures on a TV or using pictures in emails and on websites. 16:9S (1920×1080) Suitable for playing pictures on a wide screen TV. Image size for movies can be selected from the [SETUP] menu. [IMAGE SIZE/FRAME RATE] (p. 27) “Number of storable pictures (still images)/ Continuous recording length (movies) in the internal memory and SD/SDHC memory cards” (p. 49)
Page: 27
27 EN For information on using the menus, see “Using the Menu” (p. 4). Menus for Shooting Functions The default settings of the function are highlighted in . Selecting a compression mode for still images [COMPRESSION] z (Shooting menu) X COMPRESSION Available shooting modes: P M N*1 s P ~ *1 Available in the FE-4020/X-940 only. Submenu 2 Application FINE Shooting at high quality. NORMAL Shooting at normal quality. “Number of storable pictures (still images)/Continuous recording length (movies) in the internal memory and SD/SDHC memory cards” (p. 49) Selecting the image quality for movies [IMAGE SIZE/FRAME RATE] A (Movie menu) X IMAGE SIZE/FRAME RATE Available shooting modes: A Submenu 1 Submenu 2 Application IMAGE SIZE VGA (640×480)/ QVGA (320×240) Select the image quality based on the image size and frame rate. Higher frame rates provide smoother movie images. FRAME RATE N 30fps*1 / O 15fps*1 *1 frames per second “Number of storable pictures (still images)/Continuous recording length (movies) in the internal memory and SD/SDHC memory cards” (p. 49)
Page: 28
28 EN Selecting the focusing area [AF MODE] z (Shooting menu) X AF MODE Available shooting modes: P M N*1 s P ~ *1 Available in the FE-4020/X-940 only. Submenu 2 Application FACE/iESP The camera focuses automatically. (If a face is detected, it is shown by a white frame*1 ; when the shutter button is pressed halfway and the camera is able to focus, the frame color is changed to green*2 if the camera is able to focus. If no face is detected, the camera chooses a subject in the frame and focuses automatically.) SPOT The camera focuses on the subject located within the AF target mark. AF TRACKING The camera tracks the subject movement automatically to focus on it continuously. *1 For some subjects, the frame may not appear or may take some time to appear. *2 If the frame blinks in red, the camera is unable to focus. Try again to press the shutter button halfway. To focus on a moving subject continuously (AF Tracking) 1 Hold the camera to align the AF target mark on the subject and press the H button. 2 When the camera recognizes the subject, the AF target mark automatically tracks the subject movement to focus on it continuously. 3 To cancel the tracking, press the H button. Depending on the subjects or the shooting conditions, the camera may be unable to lock the focus or fail to track the subject movement. When the camera fails to track the subject movement, the AF target mark changes to red. Shooting at higher magnifications than optical zoom without reducing the image quality [FINE ZOOM] z (Shooting menu) X FINE ZOOM Available shooting modes: P M N*1 s P ~ *1 Available in the FE-4020/X-940 only. Submenu 2 Application OFF Optical zoom and digital zoom are used to zoom in for shooting. ON Optical zoom and image cropping are combined to zoom in for shooting (up to 26.8x). This function will not reduce the image quality since it does not convert the data with fewer pixels into the data with larger pixels. When set to [ON], [IMAGE SIZE] is limited to [4] or lower. When set to [ON], digital zoom is canceled automatically. [FINE ZOOM] is not available when [% SUPER MACRO] (p. 23) is selected. Stabilizing the blurred image caused by the camera shake when shooting [IMAGE STABILIZER] (Still images) (FE-4040)/[IS MOVIE MODE] (Movies) z (Shooting menu) X IMAGE STABILIZER A (Movie menu) X IS MOVIE MODE Available shooting modes: P M s P ~ A Submenu 2 Application OFF Shoots without using the image stabilizing function. ON Shoots using the image stabilizing function. The default settings are [ON] for [IMAGE STABILIZER] (still images) and [OFF] for [IS MOVIE MODE] (movies).
Page: 29
29 EN For information on using the menus, see “Using the Menu” (p. 4). At very slow shutter speeds (for example when using still picture shooting mode or taking night photographs), some images may not acquire the proper stabilization effect. Image stabilization may not prevent motion blur caused by movement of the subject or by extreme movement of the camera. When [IS MOVIE MODE] (movies) is set to [ON] during shooting, the recorded images will be slightly magnified. Recording sound when shooting still images [R] z (Shooting menu) X R Available shooting modes: P M N*1 s *1 Available in the FE-4020/X-940 only. Submenu 2 Application OFF No sound is recorded. ON The camera automatically starts recording sound for approx. 4 seconds after a picture is taken. This is useful for recording notes or comments about the picture. When recording, aim the microphone (p. 6) at the source of the sound you want to record. Recording sound when shooting movies [R] A (Movie menu) X R Available shooting modes: A Submenu 2 Application OFF No sound is recorded. ON Sound is recorded. When set to [ON], only the digital zoom can be used during movie recording. To record the movie with the optical zoom, set [R] (movies) to [OFF]. Displaying icon guides [ICON GUIDE] z (Shooting menu) X ICON GUIDE Available shooting modes: P M N*1 s P ~ A *1 Available in the FE-4020/X-940 only. Submenu 2 Application OFF No icon guide is displayed. ON The explanation of the selected icon will be displayed when a shooting mode or shooting function menu icon is selected (position the cursor on the icon for a while to display the explanation). Icon guide 4 4 P P 0.0 0.0 AUTO WB AUTO WB AUTO ISO AUTO ISO 14M Functions can be changed manually. PROGRAM AUTO PROGRAM AUTO
Page: 30
30 EN Menus for Playback, Editing, and Printing Functions Playing back pictures automatically [SLIDESHOW] SLIDESHOW To start a slideshow After pressing the H button, the slideshow starts. To stop the slideshow, press the H button or the m button. Single-frame advance/rewind: During a slideshow, press I to advance one frame or press H to rewind one frame. Retouching images [PERFECT FIX] PERFECT FIX Depending on the picture, the editing may not be effective. The retouching process may lower the image resolution. Submenu 1 Application ALL [LIGHTING FIX] and [REDEYE FIX] are applied together. LIGHTING FIX Only sections darkened by backlighting and dim lighting are brightened. REDEYE FIX Eyes that are reddened by the flash are corrected. 1 Use FG to select a correction method, and press the H button. 2 Use HI to select an image for retouching, and press the H button. The retouched image is saved as a separate image. ● Changing the image size [Q] EDIT X Q Submenu 2 Application 8 640 × 480 This saves a high-resolution image as a separate image with a smaller size for use in e-mail attachments and other applications. 9 320 × 240 1 Use HI to select an image. 2 Use FG to select the size, and press the H button. Cropping images [P] EDIT X P 1 Use HI to select an image, and press the H button. 2 Use the zoom buttons to select the size of the cropping frame, and use FGHI to move the frame. Cropping frame OK SET 3 Press the H button. The edited image will be saved as a separate image. Erasing images [ERASE] ERASE Submenu 1 Application ALL ERASE All images in the internal memory or card will be erased. SEL. IMAGE Images are individually selected and erased. ERASE Deletes the image displayed. CANCEL Cancels erasing. ●
Page: 31
31 EN For information on using the menus, see “Using the Menu” (p. 4). When erasing pictures in a internal memory, do not insert the card into the camera. When erasing pictures from the card, insert a card into the camera in advance. To erase all images [ALL ERASE] 1 Use FG to select [ALL ERASE], and press the H button. 2 Use FG to select [YES], and press the H button. To individually select and erase images [SEL. IMAGE] 1 Use FG to select [SEL. IMAGE], and press the H button. 2 Use HI to select the image to be erased, and press the H button to add a R mark to the image. Press the W zoom button to display an index view. Images can be quickly selected using FGHI. Press the T button to return to the single frame display. MENU OK SEL. IMAGE ERASE/CANCEL R mark 3 Repeat Step 2 to select the images to be erased, and then press the m button to erase the selected images. 4 Use FG to select [YES], and press the H button. The images with a R mark are erased. Saving print settings to the image data [PRINT ORDER] q (Playback menu) X PRINT ORDER “Print Reservations (DPOF)” (p. 40) Print reservation can be set only for still images that are recorded to the card. ● ● Protecting images [0] q (Playback menu) X 0 Protected images cannot be erased by [ERASE] (p. 18, 30), [SEL. IMAGE], or [ALL ERASE] (p. 30), but all images are erased by [MEMORY FORMAT]/[FORMAT] (p. 32). 1 Use HI to select an image. 2 Press the H button. Press the H button again to cancel the settings. 3 If necessary, repeat Steps 1 and 2 to protect other images, and press the m button. Rotating images [y] q (Playback menu) X y 1 Use HI to select an image. 2 Press the H button to rotate the image. 3 If necessary, repeat Steps 1 and 2 to make settings for other images, and press the m button. The new picture orientations will be saved even after the power is turned off. Adding sound to still images [R] q (Playback menu) X R 1 Use HI to select an image. 2 Aim the microphone toward the sound source. Microphone FE-4040 FE-4020/X-940 3 Press the H button. Recording starts. ● ●
Page: 32
32 EN Erasing data completely [MEMORY FORMAT]/[FORMAT] r (Settings 1) X MEMORY FORMAT/ FORMAT Before formatting, check that no important data is left in the internal memory or card. Cards must be formatted with this camera before first use or after being used with other cameras or computers. Submenu 2 Application YES Completely erases the image data in the internal memory*1 or card (including protected images). NO Cancels formatting. *1 Be sure to remove the card before formatting the internal memory. Copying images in the internal memory to the card [BACKUP] r (Settings 1) X BACKUP Submenu 2 Application YES Backs up image data in the internal memory to the card. NO Cancels the backup. It takes some time to back up data. Check that the battery has sufficient power before starting the backup. Changing the display language [W] r (Settings 1) X W Submenu 2 Application Languages The language for the menus and error messages displayed on the monitor is selected. “Changing the display language” (p. 13) Restoring the shooting functions to the default settings [RESET] r (Settings 1) X RESET Submenu 2 Application YES Restores the following menu functions to the default settings. Flash (p. 23) Macro (p. 23) Self-timer (p. 24) Exposure compensation (p. 24) White balance (p. 25) ISO (p. 25) Image size (p. 26) Menu functions in z (Shooting menu)/A (Movie menu) (p. 27 to 29) • • • • • • • • NO The current settings will not be changed. Menus for Other Camera Settings
Page: 33
33 EN For information on using the menus, see “Using the Menu” (p. 4). Selecting a method for connecting the camera to other devices [USB CONNECTION] r (Settings 1) X USB CONNECTION Submenu 2 Application AUTO When the camera is connected to another device, the settings selection screen is displayed. STORAGE Select when transferring images to a computer or when using ib computer software with the camera connected to a computer. MTP Select when transferring images to a computer running Windows Vista or Windows 7 without using ib computer software. PRINT Select when connecting to a PictBridge-compatible printer. Copying pictures to a computer without using ib computer software This camera is compatible with the USB Mass Storage Class. You can transfer and save the image data on your computer while the camera and the computer are connected. System requirements Windows 2000 Professional/ Windows XP/Windows Vista/Windows 7/ Mac OS X v10.3 or later Even if a computer has USB ports, proper operation is not guaranteed in the following cases. computers with USB ports installed using an expansion card, etc. computers without a factory-installed OS and home-built computers ● ● Turning on the camera with the q button [q POWER ON] r (Settings 1) X q POWER ON Submenu 2 Application NO The camera is not turned on. To turn on the camera, press the n button. YES Pressing the q button turns on and starts the camera in the playback mode. Saving the mode when the camera is turned off [SAVE SETTINGS] r (Settings 1) X SAVE SETTINGS Submenu 2 Application YES The shooting mode is saved when the camera is turned off and is reactivated the next time the camera is turned on. NO The shooting mode is set to P mode when the camera is turned on. Choosing the opening screen display [PW ON SETUP] s (Settings 2) X PW ON SETUP Submenu 2 Application OFF No opening screen is displayed. ON The opening screen is displayed when the camera is turned on.
Page: 34
34 EN Selecting the camera sound and its volume [SOUND SETTINGS] s (Settings 2) X SOUND SETTINGS Submenu 2 Submenu 3 Submenu 4 Application SILENT MODE*1, 2 OFF/ON — Select [ON] to disable camera sounds (operating sound, shutter sound, and warning sound) and mute sound during playback. BEEP SOUND TYPE 1/2/3 Selects the operating sound and volume of the camera buttons (except the shutter button). VOLUME OFF (No Sound) or 2 levels of volume SHUTTER SOUND SOUND TYPE 1/2/3 Selects the type and volume of the shutter sound. VOLUME OFF (No Sound) or 2 levels of volume 8 OFF (No Sound) or 2 levels of volume — Adjusts the warning sound volume. q VOLUME OFF (No Sound) or 5 levels of volume — Adjusts the image playback volume. *1 Even when [SILENT MODE] is [ON], FG can be used to adjust volume during playback. *2 Even when [SILENT MODE] is [ON], sound is played when images are displayed on a television. Adjusting the CCD and the image processing function [PIXEL MAPPING] s (Settings 2) X PIXEL MAPPING This function has already been adjusted at factory shipping, and no adjustment is needed right after purchase. Approximately once a year is recommended. For best results, wait at least one minute after taking or viewing pictures before performing pixel mapping. If the camera is turned off during pixel mapping, be sure to perform it again. To adjust the CCD and the image processing function Press the H button when [START] (Submenu 2) is displayed. The camera checks and adjusts the CCD and the image processing function at the same time. ● Adjusting the brightness of the monitor [s] s (Settings 2) X s Submenu 2 Application BRIGHT/ NORMAL Selects the monitor brightness depending on the surrounding brightness. Setting the date and time [X] s (Settings 2) X X “Setting the date, time and time zone” (p. 12) To select the date display order 1 Press I after setting Minute, and use FG to select the date display order. 02 26 12 30 : . . 2010 OK SET X Y M D TIME MENU CANCEL Y/M/D Y/M/D Date order
Page: 35
35 EN For information on using the menus, see “Using the Menu” (p. 4). Switching between home and travel destination time zones [WORLD TIME] s (Settings 2) X WORLD TIME You will not be able to select a time zone using [WORLD TIME] if the camera clock has not first been set using [X]. Submenu 2 Submenu 3 Application HOME/ALTERNATE x The time in the home time zone (the time zone selected for x in submenu 2). y The time in the travel destination time zone (the time selected for y in submenu 2). x*1 — Select the home time zone (x). y*1, 2 — Select the travel destination time zone (y). *1 In areas where daylight saving time is in effect, use FG to turn daylight saving time ([SUMMER]) on. *2 When you select a time zone, the camera automatically calculates the time difference between the selected zone and the home time zone (x) to display the time in the travel destination time zone (y). Selecting a video signal system to match your TV [VIDEO OUT] s (Settings 2) X VIDEO OUT The TV video signal system varies depending on the countries and regions. Before viewing camera images on your TV, select the video output according to your TV’s video signal type. Submenu 2 Application NTSC Connecting the camera to a TV in North America, Taiwan, Korea, Japan, and so on. PAL Connecting the camera to a TV in European countries, China, and so on. The factory default settings differ according to the region where the camera is sold. To play back camera images on a TV 1 Use the camera to select the same video signal system as the one of connected TV ([NTSC]/[PAL]). 2 Connect the TV and camera. FE-4040 FE-4020/X-940 Connect to the TV video input jack (yellow) and audio input jack (white). Multi-connector AV cable (supplied) Connector cover
Page: 36
36 EN 3 Turn on the TV, and change “INPUT” to “VIDEO (an input jack connected to the camera).” For details on changing the input source of the TV, refer to the TV’s instruction manual. 4 Press the q button, and use HI to select the image for playback. Depending on the TV’s settings, the displayed images and information may become cropped. Saving battery power between shots [POWER SAVE] t (Settings 3) X POWER SAVE Submenu 2 Application OFF Cancels [POWER SAVE]. ON When the camera is not being used for approx. 10 seconds, the monitor automatically turns off to save battery power. To resume standby mode Press any button.
Page: 37
37 EN Printing 2 Turn on the printer, and then connect the printer and camera. FE-4040 FE-4020/X-940 USB cable (supplied) OK CUSTOM PRINT EASY PRINT START I button Connector cover Multi-connector 3 Press I to start printing. 4 To print another image, use HI to select an image, and press the H button. To exit printing After a selected image is displayed on the screen, disconnect the USB cable from the camera and printer. OK PRINT EXIT Direct printing (PictBridge*1 ) By connecting the camera to a PictBridge- compatible printer, you can print images directly without using a computer. To find out if your printer supports PictBridge, refer to the printer’s instruction manual. *1 PictBridge is a standard for connecting digital cameras and printers of different makers and printing out pictures directly. The printing modes, paper sizes, and other parameters that can be set with the camera vary depending on the printer that is used. For details, refer to the printer’s instruction manual. For details on the available paper types, loading paper, and installing ink cassettes, refer to the printer’s instruction manual. Printing images at the printer’s standard settings [EASY PRINT] In the [SETUP] menu, set [USB CONNECTION] to [PRINT]. “Using the Menu” (p. 4) 1 Display the image to be printed on the monitor. “Viewing images” (p. 16)
Page: 38
38 EN Changing the printer’s settings for printing [CUSTOM PRINT] 1 Follow Steps 1 and 2 in [EASY PRINT] (p. 37). 2 Press the H button to start printing. 3 Use FG to select the print mode, and press the H button. PRINT MODE SELECT MULTI PRINT PRINT ORDER ALL INDEX MENU OK SET EXIT ALL PRINT PRINT PRINT Submenu 2 Application PRINT This prints the image selected in Step 6. ALL PRINT This prints all images stored in the internal memory or card. MULTI PRINT This prints one image in a multiple layout format. ALL INDEX This prints an index of all images stored in the internal memory or card. PRINT ORDER*1 This prints images based on the print reservation data on the card. *1 [PRINT ORDER] is available only when print reservations have been made. “Print Reservations (DPOF)” (p. 40) 4 Use FG to select [SIZE] (Submenu 3), and press I. If the [PRINTPAPER] screen is not displayed, the [SIZE], [BORDERLESS], and [PICS/SHEET] are set to the printer’s standard. PRINTPAPER SIZE BORDERLESS STANDARD OK SET MENU BACK STANDARD STANDARD 5 Use FG to select the [BORDERLESS] or [PICS/SHEET] settings, and press the H button. Submenu 4 Application OFF/ON*1 The image is printed with a border around it ([OFF]). The image is printed to fill the entire paper ([ON]). (The number of images per sheet varies depending on the printer.) The number of images per sheet ([PICS/SHEET]) is selectable only when [MULTI PRINT] is selected in Step 3. *1 The available settings for [BORDERLESS] vary depending on the printer. If [STANDARD] is selected in Steps 4 and 5, the image is printed at the printer’s standard settings. NORM OK SINGLE PRINT PRINT 4/30 4/30 MORE ’10/02/26 12:30 ’10/02/26 12:30 NORM 14M FILE 100 0004 100 0004 6 Use HI to select an image. 7 Press F to make a print reservation for the current image. Press G to make the detailed printer settings for the current image. To make the detailed printer settings 1 Use FGHI to select the setting, and press the H button. PRINT INFO FILE NAME P DATE WITHOUT WITHOUT MENU OK SET EXIT <x <x 1 1
Page: 39
39 EN Submenu 5 Submenu 6 Application <× 0 to 10 This selects the number of prints. DATE WITH/ WITHOUT Selecting [WITH] prints the images with the date. Selecting [WITHOUT] prints the images without the date. FILE NAME WITH/ WITHOUT Selecting [WITH] prints the file name on the image. Selecting [WITHOUT] does not print any file name on the image. P (Proceeds to the setting screen.) This selects a portion of the image for printing. To crop an image [P] 1 Use the zoom buttons to select the size of the cropping frame, use FGHI to move the frame, and then press the H button. Cropping frame OK SET 2 Use FG to select [OK], and press the H button. MENU OK P CANCEL OK OK SET BACK 8 If necessary, repeat Steps 6 and 7 to select the image to be printed, make the detailed settings, and set [SINGLE PRINT]. 9 Press the H button. PRINT MENU OK CANCEL SET BACK PRINT PRINT 10Use FG to select [PRINT], and press the H button. Printing starts. When [OPTION SET] is selected in [ALL PRINT] mode, [PRINT INFO] screen is displayed. When printing is finished, the [PRINT MODE SELECT] screen is displayed. PRINT MODE SELECT MULTI PRINT PRINT ORDER ALL INDEX MENU OK SET EXIT ALL PRINT PRINT PRINT To cancel printing 1 When [DO NOT REMOVE USB CABLE] is displayed, press the m button, use FG to select [CANCEL], and then press the H button. PRINT OK SET CONTINUE CANCEL CANCEL MENU DO NOT REMOVE USB CABLE CANCEL ● ● ●
Page: 40
40 EN 11Press the m button. 12When the message [REMOVE USB CABLE] is displayed, disconnect the USB cable from the camera and printer. Print Reservations (DPOF*1 ) In print reservations, the number of prints and date imprint option are saved in the image on the card. This enables easy printing at a printer or print shop supporting DPOF by using only the print reservations on the card without a computer or a camera. *1 DPOF is a standard for storing automatic printout information from digital cameras. Print reservations can be set only for the images stored on the card. Insert a card with recorded images before making print reservations. DPOF reservations set by another DPOF device cannot be changed by this camera. Make changes using the original device. Making new DPOF reservations with this camera will erase the reservations made by the other device. DPOF print reservations can be made for up to 999 images per card. Single-frame print reservations [<] 1 Display the [SETUP] menu. “Using the Menu” (p. 4) 2 From the playback menu q, select [PRINT ORDER] and then press the H button. PRINT ORDER U MENU OK SET EXIT < < 3 Use FG to select [<], and press the H button. NORM 4/30 4/30 ’10/02/26 12:30 ’10/02/26 12:30 NORM 14M FILE 100 0004 100 0004 OK 0 0 SET 4 Use HI to select the image for print reservation. Use FG to select the quantity. Press the H button. MENU OK X DATE TIME SET BACK NO NO 5 Use FG to select the [X] (date print) screen option, and press the H button. Submenu 2 Application NO This prints the image only. DATE This prints the image with the shooting date. TIME This prints the image with the shooting time. PRINT ORDER CANCEL 1 ( 1) 1 ( 1) MENU OK SET BACK SET SET 6 Use FG to select [SET], and press the H button.
Page: 41
41 EN Reserving one print each of all images on the card [U] 1 Follow Steps 1 and 2 in [<] (p. 40). 2 Use FG to select [U], and press the H button. 3 Follow Steps 5 and 6 in [<]. Resetting all print reservation data 1 Follow Steps 1 and 2 in [<] (p. 40). 2 Use FG to select either [<] or [U], and press the H button. PRINT ORDER SETTING MENU OK PRINT ORDERED SET BACK KEEP RESET RESET 3 Use FG to select [RESET], and press the H button. Resetting the print reservation data for selected images 1 Follow Steps 1 and 2 in [<] (p. 40). 2 Use FG to select [<], and press the H button. 3 Use FG to select [KEEP] and press the H button. 4 Use HI to select the image with the print reservation you want to cancel. Use FG to set the print quantity to “0”. 5 If necessary, repeat Step 4, and then press the H button when finished. 6 Use FG to select the [X] (date print) screen option, and press the H button. The settings are applied to the remaining images with the print reservation data. 7 Use FG to select [SET], and press the H button. ●
Page: 42
42 EN Usage Tips If the camera does not work as intended, or if an error message is displayed on the screen, and you are unsure of what to do, refer to the information below to fix the problem(s). Troubleshooting Battery “The camera does not work even when batteries are installed”. Insert recharged batteries in the correct direction. “Inserting the battery and the SD/SDHC memory card (sold separately)” (p. 10),“Charging the battery with the supplied USB-AC adapter” (p. 11) Battery performance may have been reduced temporarily due to low temperature. Take the batteries out of the camera, and warm them by putting them in your pocket for a while. Card/Internal memory “An error message is displayed”. “Error message” (p. 43) Shutter button “No picture is taken when the shutter button is pressed”. Cancel sleep mode. To save battery power, the camera automatically goes into sleep mode and the monitor turns off if there is no operation for 3 minutes when the camera is turned on. No picture is taken even if the shutter button is fully pressed in this mode. Operate the zoom buttons or other buttons to restore the camera from sleep mode before taking a picture. If the camera is left for another 12 minutes, it automatically turns off. Press the n button to turn the camera on. Press the q button to switch to the shooting mode. Wait until #(flash charge) stops blinking before taking pictures. ● ● ● ● ● Monitor “Difficult to see”. Condensation*1 may have occurred. Turn off the power, and wait for the camera body to become acclimated to the surrounding temperature and dry out before taking pictures. *1 Dew drops can form in the camera when it is suddenly taken from a cold location into a warm, humid room. “Vertical lines appear on the screen”. This condition may occur when the camera is pointed at an extremely bright subject under a clear sky and so on. The lines do not appear, however, in the final image. “The light is caught in the picture”. Shooting with flash in dark situations results in an image with many flash reflections on dust in the air. Date and time function “Date and time settings return to the default setting”. If the batteries are removed and left out of the camera for about a day*2 , the date and time settings return to the default setting, and must be reset. *2 The time until the date and time settings return to the default setting varies depending on how long the batteries have been loaded. “Setting the date, time and time zone” (p. 12) Miscellaneous “The camera makes a noise when taking pictures”. The camera may activate the lens and make a noise even if no operation is performed. This is because the camera automatically performs actions of auto focus as far as it is ready to shoot. ● ● ● ● ●
Page: 43
43 EN Error message When one of the messages below is displayed on the monitor, check the corrective action. Error message Corrective action CARD ERROR Card problem Insert a new card. WRITE PROTECT Card problem The card write-protect switch is set to the “LOCK” side. Release the switch. MEMORY FULL Internal memory problem Insert a card. Erase unwanted images.*1 • • CARD FULL Card problem Replace the card. Erase unwanted images.*1 • • CARD SETUP OK SET FORMAT POWER OFF POWER OFF Card problem Use FG to select [FORMAT], and press the H button. Next, use FG to select [YES], and press the H button.*2 MEMORY SETUP OK MEMORY FORMAT SET POWER OFF POWER OFF Internal memory problem Use FG to select [MEMORY FORMAT], and press the H button. Next, use FG to select [YES], and press the H button.*2 NO PICTURE Internal memory/Card problem Take pictures before viewing them. PICTURE ERROR Problem with selected image Use photo retouch software, etc. to view the image on a computer. If the image still cannot be viewed, the image file is corrupted. THE IMAGE CANNOT BE EDITED Problem with selected image Use photo retouch software, etc. to edit the image on a computer. BATTERY EMPTY Battery problem Charge the battery. NO CONNECTION Connection problem Connect the camera and computer or printer correctly. NO PAPER Printer problem Load paper into the printer. NO INK Printer problem Refill the ink in the printer. JAMMED Printer problem Remove the jammed paper. SETTINGS CHANGED*3 Printer problem Return to the status where the printer can be used. PRINT ERROR Printer problem Turn off the camera and printer, check the printer for any problems, and then turn the power on again. CANNOT PRINT*4 Problem with selected image Use a computer to print. *1 Before erasing important images, download them to a computer. *2 All data will be erased. *3 This is displayed, for instance, when the printer’s paper tray has been removed. Do not operate the printer while making the print settings on the camera. *4 This camera may be unable to print images taken by other cameras.
Page: 44
44 EN Shooting tips When you are unsure of how to take a picture that you envision, refer to the information below. Focusing “Focusing on the subject” Taking a picture of a subject not in the center of the screen After focusing on an object at the same distance as the subject, compose the shot, and take the picture. Pressing the shutter button halfway (p. 14) Set [AF MODE] (p. 28) to [FACE/iESP] Taking a picture in [AF TRACKING] mode (p. 28) The camera tracks the subject movement automatically to focus on it continuously. Taking a picture of subjects where autofocus is difficult In the following cases, after focusing on an object (by pressing the shutter button halfway down) with high contrast at the same distance as the subject, compose the shot, and take the picture. Subjects with low contrast When extremely bright objects appear in the center of the screen Object with no vertical lines*1 *1 It is also effective to compose the shot by holding the camera vertically to focus, and then returning to the horizontal position to take the picture. When objects are at different distances ● ● ● ● Fast-moving object The subject is not in the center of the frame Camera shake “Taking pictures without camera shake” Taking pictures using N mode (p. 20) (FE-4020/X-940) Taking pictures using [IMAGE STABILIZER] (p. 28) (FE-4040) Select C (SPORT) in s mode (p. 20) The C (SPORT) mode uses a fast shutter speed and can reduce the blur incurred by a moving subject. Taking pictures at a high ISO sensitivity If a high ISO sensitivity is selected, pictures can be taken at a high shutter speed even at locations where a flash cannot be used. “Selecting the ISO sensitivity” (p. 25) Exposure (brightness) “Taking pictures with the right brightness” Taking pictures using [FILL IN] (p. 23) flash A subject against backlight is brightened. Taking pictures using exposure compensation (p. 24) Adjust the brightness while viewing the screen for taking the picture. Normally, taking pictures of white subjects (such as snow) results in images that are darker than the actual subject. Use the exposure compensation to adjust in the positive (+) direction to express whites as they appear. When taking pictures of black subjects, on the other hand, it is effective to adjust in the negative (-) direction. ● ● ● ● ● ●
Page: 45
45 EN Color hue “Taking pictures with colors at the same shade as they appear” Taking pictures by selecting white balance (p. 25) Best results in most environments can normally be obtained with the [WB AUTO] setting, but for some subjects, you should try experimenting with different settings. (This is especially true for sunshade under a clear sky, mixed natural and artificial light settings, and so on.) Image quality “Taking sharper pictures” Taking pictures with the optical zoom Avoid using digital zoom (p. 16) to take pictures. Taking pictures at a low ISO sensitivity If the picture is taken with a high ISO sensitivity, noise (small colored spots and color unevenness that were not in the original image) can occur, and the image can appear grainy. The resulting image is grainier than with low ISO sensitivity as well. “Selecting the ISO sensitivity” (p. 25) Batteries “Making batteries last longer” Avoid any of the following operations when not actually taking pictures because they deplete the battery power Repeatedly pressing the shutter button halfway Repeatedly using the zoom Set [POWER SAVE] (p. 36) to [ON] ● ● ● ● ● ● ● Playback/Editing tips Playback “Playing images in the internal memory and card” Remove the card when playing pictures in the internal memory “Inserting the battery and the SD/SDHC memory card (sold separately)” (p. 10) Editing “Erasing the sound recorded to a still image” Record over the sound with silence when playing back the image “Adding sound to still images [R]” (p. 31) ● ●
Page: 46
46 EN Appendix Battery and AC adapter (included) This camera uses one Olympus lithium ion battery (LI-70B). No other type of batteries can be used. Caution: There is a risk of explosion if the battery is replaced with the incorrect battery type. Dispose of the used battery following the instructions. (p. 52) Power consumption by the camera varies depending on which functions are used. During the conditions described below, power is consumed continuously and the battery becomes exhausted quickly. The zoom is used repeatedly. The shutter button is pressed halfway repeatedly in shooting mode, activating the auto focus. A picture is displayed on the monitor for an extended period of time. The camera is connected to a computer or printer. Using an exhausted battery may cause the camera to turn off without displaying the battery level warning. The rechargeable battery is not fully charged at the time of purchase. Before use, charge the battery fully with the supplied F-2AC USB-AC adapter (hereafter referred to as AC adapter) or an optional AC adapter (F-1AC/D-7AC). When the included AC adapter is used, charging usually takes approximately 3 hours (varies on usage). The included AC adapter has been designed to be used only for charging. Make sure that operations such as shooting, viewing images and so on are not being used while the AC adapter is connected to the camera. The included AC adapter is designed to be used only with this camera. Other cameras cannot be charged with this AC adapter. Do not use with other devices. For plug-in type AC adapter: The included AC adapter is intended to be correctly orientated in a vertical or floor mount position. • • • • • • • • • • • • • Camera care Exterior Wipe gently with a soft cloth. If the camera is very dirty, soak the cloth in mild soapy water and wring well. Wipe the camera with the damp cloth and then dry it with a dry cloth. If you have used the camera at the beach, use a cloth soaked in clean water and wrung well. Monitor Wipe gently with a soft cloth. Lens Blow dust off the lens with a commercial blower, then wipe gently with a lens cleaner. Battery/AC adapter Wipe gently with a soft, dry cloth. Do not use strong solvents such as benzene or alcohol, or chemically treated cloth. Mold may form on the lens surface if the lens is left dirty. Storage When storing the camera for extended periods, remove the battery, AC adapter and card, and keep in a cool, dry place that is well ventilated. Periodically insert the battery and test the camera functions. Avoid leaving the camera in places where chemical products are handled since this may result in corrosion. • • • • • •
Page: 47
47 EN Using a separately sold AC adapter A D-7AC AC adapter (sold separately) is useful for time-consuming tasks such as downloading images to a computer or when running a slideshow for a long period of time. A CB-MA1/ CB-MA3 multi-adapter (sold separately) is required when using a D-7AC AC adapter with this camera. To charge the battery, turn the camera off and connect the D-7AC AC adapter. Use only AC adapters approved for use with this camera. Using your AC adapter abroad The AC adapter can be used in most home electrical sources within the range of 100 V to 240 V AC (50/60Hz) around the world. However, depending on the country or area you are in, the AC wall outlet may be shaped differently and the AC adapter may require a plug adapter to match the wall outlet. For details, ask at your local electrical shop or travel agent. Do not use travel voltage converters as they could damage your AC adapter. • • Using an SD/SDHC memory card A card (and internal memory) also corresponds to the film that records images in a film camera. Otherwise, the recorded images (data) can be erased, and retouching is also available with the use of a computer. Cards can be removed from the camera and exchanged, but this is not possible with the internal memory. Use of larger capacity cards enables you to take more pictures. SD/SDHC card write-protect switch The SD/SDHC card body has a write-protect switch. If you set the switch to the “LOCK” side, you will not be able to write to the card, delete data or format. Release the switch to enable writing. LOCK Cards compatible with this camera SD/SDHC memory cards (for more information, visit the Olympus website)
Page: 48
48 EN Using a new card Cards must be formatted with this camera before first use or after being used with other cameras or computers. [MEMORY FORMAT]/[FORMAT] (p. 32) Checking the image saving location The memory indicator shows whether the internal memory or card is being used during shooting and playback. Current memory indicator v: Internal memory is being used w: Card is being used Current memory indicator Playback mode Shooting mode ’10/02/26 12:30 ’10/02/26 12:30 4/30 4/30 4 4 P P 0.0 0.0 AUTO WB AUTO WB AUTO ISO AUTO ISO 14M Even if [MEMORY FORMAT]/[FORMAT], [ERASE], [SEL. IMAGE], or [ALL ERASE] is performed, the data in the card is not completely erased. When disposing of the card, damage the card to prevent the disclosure of personal data. Readout/recording process of the card During shooting, the current memory indicator lights in red while the camera is writing data. Never open the battery/card compartment cover or unplug the USB cable. This can not only damage the image data but also render the internal memory or card unusable. 4 4 P P 0.0 0.0 AUTO WB AUTO WB AUTO ISO AUTO ISO 14M Lights in red
Page: 49
49 EN Number of storable pictures (still images)/Continuous recording length (movies) in the internal memory and SD/SDHC memory cards The figures for the number of storable still pictures and continuous recording length are approximate. The actual capacity varies with shooting conditions and the card used. Still images IMAGE SIZE COMPRESSION Number of storable still pictures Internal memory SD/SDHC memory card (1 GB) With sound Without sound With sound Without sound 6 4288×3216 L 2 2 123 123 M 4 4 242 244 4 3264×2448 L 4 4 209 211 M 7 7 406 414 n 2560×1920 L 6 6 334 340 M 12 12 637 658 3 2048×1536 L 10 10 536 545 M 20 20 1,044 1,081 2 1600×1200 L 16 17 865 890 M 31 34 1,637 1,781 1 1280×960 L 25 26 1,316 1,376 M 46 52 2,422 2,753 7 640×480 L 82 105 4,326 5,506 M 145 193 7,569 10,094 0 1920×1080 L 15 15 797 829 M 29 31 1,553 1,637 Movies IMAGE SIZE FRAME RATE Continuous recording length Internal memory SD/SDHC memory card (1 GB) With sound Without sound With sound Without sound 8 640×480 N 9 sec. 9 sec. 8 min. 34 sec. 8 min. 36 sec. O 19 sec. 19 sec. 17 min. 4 sec. 17 min. 13 sec. 9 320×240 N 27 sec. 27 sec. 23 min. 49 sec. 24 min. 6 sec. O 53 sec. 55 sec. 47 min. 5 sec. 48 min. 12 sec. The maximum file size of a single movie is 2 GB, regardless of the capacity of the card. Increasing the number of pictures that can be taken Either erase unwanted images, or connect the camera to a computer or other device to save the images, and then erase the images in the internal memory or card. [ERASE] (p. 18, 30), [SEL. IMAGE] (p. 30), [ALL ERASE] (p. 30), [MEMORY FORMAT]/[FORMAT] (p. 32)
Page: 50
50 EN SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED OLYMPUS SERVICE PERSONNEL. An exclamation mark enclosed in a triangle alerts you to important operating and maintenance instructions in the documentation provided with the product. DANGER If the product is used without observing the information given under this symbol, serious injury or death may result. WARNING If the product is used without observing the information given under this symbol, injury or death may result. CAUTION If the product is used without observing the information given under this symbol, minor personal injury, damage to the equipment, or loss of valuable data may result. WARNING! TO AVOID THE RISK OF FIRE OR ELECTRICAL SHOCK, NEVER DISASSEMBLE, EXPOSE THIS PRODUCT TO WATER OR OPERATE IN A HIGH HUMIDITY ENVIRONMENT. General Precautions Read All Instructions — Before you use the product, read all operating instructions. Save all manuals and documentation for future reference. Cleaning — Always unplug this product from the wall outlet before cleaning. Use only a damp cloth for cleaning. Never use any type of liquid or aerosol cleaner, or any type of organic solvent to clean this product. Attachments — For your safety, and to avoid damaging the product, use only accessories recommended by Olympus. Water and Moisture — For precautions on products with weatherproof designs, read the weatherproofing sections. Location — To avoid damage to the product, mount the product securely on a stable tripod, stand, or bracket. Power Source — Connect this product only to the power source described on the product label. Lightning — If a lightning storm occurs while using an AC adapter, remove it from the wall outlet immediately. Foreign Objects — To avoid personal injury, never insert a metal object into the product. Heat — Never use or store this product near any heat source such as a radiator, heat register, stove, or any type of equipment or appliance that generates heat, including stereo amplifiers. Handling the Camera WARNING Do not use the camera near flammable or explosive gases. Do not use the flash and LED on people (infants, small children, etc.) at close range. You must be at least 1 m (3 ft.) away from the faces of your subjects. Firing the flash too close to the subject’s eyes could cause a momentary loss of vision. Keep young children and infants away from the camera. Always use and store the camera out of the reach of young children and infants to prevent the following dangerous situations which could cause serious injury: Becoming entangled in the camera strap, causing strangulation. Accidentally swallowing the battery, cards or other small parts. Accidentally firing the flash into their own eyes or those of another child. Accidentally being injured by the moving parts of the camera. Do not look at the sun or strong lights with the camera. Do not use or store the camera in dusty or humid places. Do not cover the flash with a hand while firing. Use SD/SDHC memory cards only. Never use other types of cards. If you accidently insert another type of card into the camera, contact an authorized distributor or service center. Do not try to remove the card by force. CAUTION Stop using the camera immediately if you notice any unusual odors, noise, or smoke around it. Never remove the batteries with bare hands, which may cause a fire or burn your hands. Never hold or operate the camera with wet hands. Do not leave the camera in places where it may be subject to extremely high temperatures. Doing so may cause parts to deteriorate and, in some circumstances, cause the camera to catch fire. Do not use the AC adapter if it is covered (such as a blanket). This could cause overheating, resulting in fire. • • • • • • • • • • • • • • • • • •

Question & answers

Have a question about the Olympus X-940 but cannot find the answer in the user manual? Perhaps the users of ManualsCat.com can help you answer your question. By filling in the form below, your question will appear below the manual of the Olympus X-940. Please make sure that you describe your difficulty with the Olympus X-940 as precisely as you can. The more precies your question is, the higher the chances of quickly receiving an answer from another user. You will automatically be sent an e-mail to inform you when someone has reacted to your question.

Ask a question about the Olympus X-940

Name
Email
Reaction

View a manual of the Olympus X-940 below. All manuals on ManualsCat.com can be viewed completely free of charge. By using the 'Select a language' button, you can choose the language of the manual you want to view.

  • Brand: Olympus
  • Product: Digital cameras
  • Model/name: X-940
  • Filetype: PDF
  • Available languages: English, French, Spanish